Partitioning of PCBs from air to clothing materials in a Danish apartment

Advancing characterization of VOC diffusion in indoor fabrics: A dual-porosity modeling approach

Volatile organic compounds (VOCs) are major chemical pollutants in indoor air. Indoor fabrics, such as curtains, carpets, sofas, and clothes, strongly adsorb VOCs due to their high loading rates and large specific surface areas. The desorption of VOCs from these fabrics can act as a secondary source, worsening indoor air pollution and prolonging its effects. The diffusion coefficient is a key parameter that determines the source-sink properties of fabrics. In this study, the VOC diffusion characteristics in fabrics were investigated through microstructural examination, mass transfer analysis, and environmental chamber experiments. Yarn and fiber gaps were identified as dual mass transfer channels within the fabrics and were represented using two distinct fractal models. A dual-porosity medium (DPM) model, based on these fractal representations, was developed to predict the VOC diffusion coefficients in indoor fabrics and was validated via experiments under various environmental conditions and fabric-VOC combinations. The results highlight the significant impact of fabric structure and composition on VOC adsorption and emission dynamics. The validated DPM model provides a comprehensive approach to predicting VOC diffusion in fabrics, providing a more accurate method for assessing indoor air quality and fabric-mediated human exposure.

Dermal exposure assessment of formal e-waste dismantlers to flame retardants and plasticizers using passive sampling methodologies

The recycling of e-waste can lead to the release of organic chemicals when materials containing additives are subjected to dismantling and grinding. In this context, the exposure of workers from a Catalonian e-waste facility to flame retardants and plasticizers (including organophosphate esters (OPEs), polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs) and dechloranes) was assessed using T-shirts and wristbands as passive samplers. The study area includes an area exclusively dedicated to cathodic ray-tube (CRT) TVs dismantling, and a grinding area where the rest of e-waste is ground. All the families of compounds were detected in both T-shirts and wristbands, with the highest concentration levels corresponding to OPEs, followed by PBDEs, NBFRs, and dechloranes. The CRT area presented higher concentration levels than the grinding area. The compounds with higher concentrations in T-shirts were 2-ethylhexyl diphenyl phosphate (EHDPP), diphenyl cresyl phosphate (DCP) and triphenyl phosphate (TPHP), and the total concentration of all groups ranged between 293 and 8324 ng/dm2-h (hour). In the case of the wristbands, the most abundant compounds were DCP, TPHP, and BDE-209, with total concentrations between 188 and 2248 ng/dm2-h. The two sampling methods appear to be complementary, as T-shirts collect coarser particles, while wristbands also capture volatile compounds. Based on normalized surface and time concentrations, the estimated daily intake (EDI) through dermal contact was calculated and carcinogenic and non-carcinogenic risks (CR and non-CR) associated with this activity assessed. The results show median CR 29 and 16 times below the threshold in CRT and grinding areas respectively. The non-CR medians were 2 and 3 times below the threshold, although in the CRT area one exceptional value surpassed the threshold, suggesting that risk can exist for some workers in the facility.

QSPR modeling for the prediction of partitioning of VOCs and SVOCs to indoor fabrics: Integrating environmental factors

Porous fabrics have a significant impact on indoor air quality by adsorbing and emitting chemical substances, such as volatile organic compounds (VOCs) and semi-volatile organic compounds (SVOCs). Understanding the partition behavior between organic compound molecules and indoor fabrics is crucial for assessing their environmental fate and associated human exposure. The physicochemical properties of fabrics and compounds are fundamental in determining the free energy of partitioning. Moreover, environmental factors like temperature and humidity critically affect the partition process by modifying the thermal and moisture conditions of the fabric. However, existing methods for determining the fabric-air partition coefficient are limited to specific fabric-chemical combinations and lack a comprehensive consideration of indoor environmental factors. In this study, large amounts of experimental data on fabric-air partition coefficients (Kfa) of (S)VOCs were collected for silk, polyester, and cotton fabrics. Key molecular descriptors were identified, integrating the influences of physicochemical properties, temperature, and humidity. Subsequently, two typical quantitative structure-property relationship (QSPR) models were developed to correlate the Kfa values with the molecular descriptors. The fitting performance, robustness, and predictive ability of the two QSPR models were evaluated through statistical analysis and internal/external validation. This research provides insights for the high-throughput prediction of the environmental behaviors of indoor organic compounds.

Chemical contaminants in blood and their implications in chronic diseases

Artificial chemical products are widely used and ubiquitous worldwide and pose a threat to the environment and human health. Accumulating epidemiological and toxicological evidence has elucidated the contributions of environmental chemical contaminants to the incidence and development of chronic diseases that have a negative impact on quality of life or may be life-threatening. However, the pathways of exposure to these chemicals and their involvements in chronic diseases remain unclear. We comprehensively reviewed the research progress on the exposure risks of humans to environmental contaminants, their body burden as indicated by blood monitoring, and the correlation of blood chemical contaminants with chronic diseases. After entering the human body through various routes of exposure, environmental contaminants are transported to target organs through blood circulation. The application of the modern analytical techniques based on human plasma or serum specimens is promising for determining the body burden of environmental contaminants, including legacy persistent organic pollutants, emerging pollutants, and inorganic elements. Furthermore, their body burden, as indicated by blood monitoring correlates with the incidence and development of metabolic syndromes, cancers, chronic nervous system diseases, cardiovascular diseases, and reproductive disorders. On this basis, we highlight the urgent need for further research on environmental pollution causing health problems in humans.

Reducing Transdermal Uptake of Semivolatile Plasticizers from Indoor Environments: A Clothing Intervention

Models and laboratory studies suggest that everyday clothing influences the transdermal uptake of semivolatile organic compounds, including phthalate plasticizers, from indoor environments. However, this effect has not been documented in environmental exposure settings. In this pilot study, we quantified daily excretion of 17 urinary metabolites (μg/day) for phthalates and phthalate alternatives in nine participants during 5 days. On Day 0, baseline daily excretion was determined in participants' urine. Starting on Day 1, participants refrained from eating phthalate-heavy foods and using personal care products. On Days 3 and 4, participants wore precleaned clothing as an exposure intervention. We observed a reduction in the daily excretion of phthalates during the intervention; mono-n-butyl phthalate, monoisobutyl phthalate (MiBP), and monobenzyl phthalate were significantly reduced by 35, 38, and 56%, respectively. Summed metabolites of di(2-ethylhexyl)phthalate (DEHP) were also reduced (27%; not statistically significant). A similar reduction among phthalate alternatives was not observed. The daily excretion of MiBP during the nonintervention period strongly correlated with indoor air concentrations of diisobutyl phthalate (DiBP), suggesting that inhalation and transdermal uptake of DiBP from the air in homes are dominant exposure pathways. The results indicate that precleaned clothing can significantly reduce environmental exposure to phthalates and phthalate alternatives.

Cloth-Air Partitioning of Neutral Per- and Polyfluoroalkyl Substances (PFAS) in North Carolina Homes during the Indoor PFAS Assessment (IPA) Campaign

Partitioning of per- and polyfluoroalkyl substances (PFAS) to indoor materials, including clothing, may prolong the residence time of PFAS indoors and contribute to exposure. During the Indoor PFAS Assessment (IPA) Campaign, we measured concentrations of nine neutral PFAS in air and cotton cloth in 11 homes in North Carolina, for up to 9 months. Fluorotelomer alcohols (i.e., 6:2 FTOH, 8:2 FTOH, and 10:2 FTOH) are the dominant target species in indoor air, with concentrations ranging from 1.8 to 49 ng m-3, 1.2 to 53 ng m-3, and 0.21 to 5.7 ng m-3, respectively. In cloth, perfluorooctane sulfonamidoethanols (i.e., MeFOSE and EtFOSE) accumulated most significantly over time, reaching concentrations of up to 0.26 ng cm-2 and 0.24 ng cm-2, respectively. From paired measurements of neutral PFAS in air and suspended cloth, we derived cloth-air partition coefficients (Kca) for 6:2, 8:2, and 10:2 FTOH; ethylperfluorooctane sulfonamide (EtFOSA); MeFOSE; and EtFOSE. Mean log(Kca) values range from 4.7 to 6.6 and are positively correlated with the octanol-air partition coefficient. We investigated the effect of the cloth storage method on PFAS accumulation and the influence of home characteristics on air concentrations. Temperature had the overall greatest effect. This study provides valuable insights into PFAS distribution, fate, and exposure indoors.

Co-occurrence of phthalate and non-phthalate plasticizers in dust and hand wipes: A comparison of levels across various sources

E-waste dismantlers' occupational exposure to plasticizers, particularly non-phthalate (NPAE) plasticizers, is poorly understood. This study monitored 11 phthalates (PAEs) and 16 NPAEs in dust and hand wipe samples from Central China e-waste workplace and ordinary homes. Concentrations of plasticizers in dust from e-waste dismantling workshops (median: 217 μg/g) were significantly lower than that from ordinary homes (462 μg/g; p < 0.01), however, the trend was similar but not significant in hand wipes from these two scenarios (50.2 vs. 72.3 μg/m2; p = 0.139). PAEs were still the dominant plasticizers, which is, on average, 5.46 and 3.58-fold higher than NPAEs. In all samples, di-(2ethylhexyl) phthalate (65.4%) and tri-octyl trimellitate (44.9%) were the most common PAE and NPAE plasticizers. Increasing dust concentrations of di-iso-nonyl ester 1,2-cyclohexane dicarboxylic acid, citrates and sebacates were significantly associated with their levels in worker's hand wipe, by contrast, this trend was not found in general population. Dust ingestion was the main channel, followed by hand-to-mouth contact, all participants' daily plasticizer intakes (median: 154 ng/kg bw/day) are within safety limits. Our work highlights knowledge gaps about co-exposure to PAEs and NPAEs by multiple pathways in occupational e-waste workers, which could provide baseline data in the future.

Characteristics and health risks of population exposure to phthalates via the use of face towels

The production of face towels is growing at an annual rate of about 4% in China, reaching 1.13 million tons by 2021. Phthalates (PAEs) are widely used in textiles, and face towels, as an important household textile, may expose people to PAEs via the skin, further leading to health risks. We collected new face towels and analyzed the distribution characterization of PAEs in them. The changes of PAEs were explored in a face towel use experiment and a simulated laundry experiment. Based on the use of face towels by 24 volunteers, we calculated the estimated daily intake (EDI) and comprehensively assessed the hazard quotient (HQ), hazard index (HI), and dermal cancer risk (DCR) of PAEs exposure in the population. PAEs were present in new face towels at total concentrations of <MDL-2388 ng/g, with a median of 173.2 ng/g, which was a lower contamination level compared with other textiles. PAE contents in used face towels were significantly higher than in new face towels. The concentrations of PAEs in coral velvet were significantly higher than those in cotton. Water washing removed some PAEs, while detergent washing increased the PAE content on face towels. Gender, weight, use time, and material were the main factors affecting EDI. The HQ and HI were less than 1, which proved PAEs had no significant non-carcinogenic health risks. Among the five target PAEs studied, DEHP was the only carcinogenic PAE and may cause potential health risks after long-term exposure. Therefore, we should pay more attention to DEHP.

Hormone receptor activities of complex mixtures of known and suspect chemicals in personal silicone wristband samplers worn in office buildings

Humans are exposed to increasingly complex mixtures of hormone-disrupting chemicals from a variety of sources, yet, traditional research methods only evaluate a small number of chemicals at a time. We aimed to advance novel methods to investigate exposures to complex chemical mixtures. Silicone wristbands were worn by 243 office workers in the USA, UK, China, and India during four work shifts. We analyzed extracts of the wristbands for: 1) 99 known (targeted) chemicals; 2) 1000+ unknown chemical features, tentatively identified through suspect screening; and 3) total hormonal activities towards estrogen (ER), androgen (AR), and thyroid hormone (TR) receptors in human cell assays. We evaluated associations of chemicals with hormonal activities using Bayesian kernel machine regression models, separately for targeted versus suspect chemicals (with detection ≥50%). Every wristband exhibited hormonal activity towards at least one receptor: 99% antagonized TR, 96% antagonized AR, and 58% agonized ER. Compared to men, women were exposed to mixtures that were more estrogenic (180% higher, adjusted for country, age, and skin oil abundance in wristband), anti-androgenic (110% higher), and complex (median 836 detected chemical features versus 780). Adjusted models showed strong associations of jointly increasing chemical concentrations with higher hormonal activities. Several targeted and suspect chemicals were important co-drivers of overall mixture effects, including chemicals used as plasticizers, fragrance, sunscreen, pesticides, and from other or unknown sources. This study highlights the role of personal care products and building microenvironments in hormone-disrupting exposures, and the substantial contribution of chemicals not often identifiable or well-understood to those exposures.

Silicone wristbands as personal passive samplers of exposure to polychlorinated biphenyls in contaminated buildings

Polychlorinated biphenyls (PCBs) were used in a number of industrial products from 1950 to 80s, including building materials. As a result, some buildings exhibit high levels of PCBs in the indoor environment. The aim of this study was to test silicone wristbands as a method for estimating personal exposure to PCBs in buildings both in controlled experiments and field settings. In the controlled study, the sampling kinetics of silicone wristbands were investigated in a 31-day uptake study. The field study focused on the application of wristbands as a personal exposure measure. It included 71 persons in a contaminated housing estate and 23 persons in a reference group. The linear uptake of PCBs ranged from 2 to 24 days for PCB-8, 18, 28, 31, 40, 44, 49, 52, 66, 99, and 101 under controlled conditions. A generic sampling rate (R_k) of 2.3 m³ d^-1 corresponding to a mass transfer coefficient of 17 m h^-1 was found in the controlled kinetic study. Partitioning coefficients were also determined for the nine congeners. In the field study, an apparent generic field sampling rate (R_f) of 2.6 m³ d^-1 was found; when adjusted to reported hours exposed, it increased to 3.5 m³ d^-1. The wristbands were shown to be a good tool for predicting airborne exposure, as there was a highly significant difference between the exposed and reference group as well as a clear trend when used for ranking of exposure. In correlation analyses, highly significant correlations were observed between air and wristband levels, though adjusting by self-reported exposure time only increased the correlation marginally in the field study. The obtained kinetic data can be used for estimating the magnitude of external exposure. The advantages provided by the wristbands in the form of easy use and handling are significant, though the limitations should also be acknowledged.

Health risk assessment of polychlorinated biphenyls (PCBs) in baby clothes. A preliminary study

Clothes may contain a large range of chemical additives and other toxic substances, which may eventually pose a significant risk to human health. Since they are associated with pigments, polychlorinated biphenyls (PCBs) may be especially relevant. On the other hand, infants are very sensitive to chemical exposure and they may wear some contact and colored textiles for a prolonged time. Consequently, a specific human health risk assessment is required. This preliminary study was aimed at analyzing the concentrations of PCBs in ten bodysuits purchased in on-line stores and local retailers. The concentrations of 12 dioxin-like and 8 non-dioxin-like PCB congeners were determined by gas chromatography coupled to high resolution mass spectrometry, with detection limits ranging between 0.01 and 0.13 pg/g. The dermal absorption to PCBs of children at different ages (6 months, 1 year and 3 years old) was estimated, and the non-cancer and cancer risks were evaluated. Total levels of PCBs ranged from 74.2 to 412 pg/g, with a mean TEQ concentration of 13.4 pg WHO-TEQ/kg. Bodysuits made of organic cotton presented a total mean PCB concentration substantially lower than clothes made of regular cotton (11.0 vs. 15.8 pg WHO-TEQ/kg). The dermal absorption to PCBs for infants was calculated in around 3·10^-5 pg WHO-TEQ/kg·day, regardless the age. This value is > 10,000-fold lower than the dietary intake of PCBs, either through breastfeeding or food consumption. Furthermore, this exposure value would not pose any health risks for the infants wearing those bodysuits. Anyhow, as it is a very preliminary study, this should be confirmed by analyzing larger sets of textile samples. Further investigations should be also focused on the co-occurrence of PCBs and other toxic chemicals (i.e., formaldehyde, bisphenols and aromatic amines) in infant clothes.

E-waste dismantling-related occupational and routine exposure to melamine and its derivatives: Estimating exposure via dust ingestion and hand-to-mouth contact

Melamine (MEL) and its derivatives are increasingly applied as nitrogenous flame retardants in consumer products. Nevertheless, limited information is available on their environmental occurrence and subsequent human exposure via multiple exposure pathways. In this study, we analysed MEL and its derivatives in dust (indication of the dust ingestion route) and hand wipe samples (indication of the hand-to-mouth route) collected in various microenvironments. The levels of ∑MELs in both dust (median: 24,100 ng/g) and participant hand samples (803 ng/m²) collected in e-waste dismantling workshops were significantly higher than those in samples collected in homes (15,600 ng/g and 196 ng/m², respectively), dormitories (13,100 ng/g and 227 ng/m², respectively) and hotel rooms (11,800 ng/g and 154 ng/m², respectively). Generally, MEL dominated in dust samples collected in e-waste dismantling workshops, whereas cyanuric acid dominated in hand wipe samples. This may occur partly because the latter is an ingredient in disinfection products, which are more frequently employed in daily lives during the COVID-19 pandemic. Exposure assessment suggests that dust ingestion is an important exposure pathway among dismantling workers and the general population, whereas hand-to-mouth contact could not be overlooked in certain populations, such as children and dismantling workers not wear gloves at work.

Early-Life Exposure to Formaldehyde through Clothing

Clothes contain a wide range of chemicals, some of them potentially hazardous. Recently, there has been a growing interest in eco-friendly clothing, including the use of organic cotton. However, the process of eco-friendly fabric production does not exclude the use of toxic substances, such as formaldehyde, a known human carcinogen. The present investigation was aimed at determining the presence of formaldehyde in eco-friendly and conventional clothing of pregnant women, babies, and toddlers from the Catalan (Spain) market. The potential effects of washing were also investigated by comparing the reduction of formaldehyde in unwashed and washed clothing. Formaldehyde was detected in 20% of samples, with a mean level of 8.96 mg/kg. Formaldehyde levels were surprisingly higher in eco-friendly than in regular garments (10.4 vs. 8.23 mg/kg). However, these differences were only significant (p < 0.05) for bras (11.6 vs. 7.46 mg/kg) and panties (27.1 vs. 6.38 mg/kg) of pregnant women. Dermal exposure and health risks were assessed for three vulnerable population groups: pregnant women, babies, and toddlers. In general, exposure was higher in babies (up to 1.11 × 10−3 mg/kg/day) than in other groups (2.58 × 10−4 and 4.50 × 10−3 mg/kg/day in pregnant women and toddlers, respectively). However, both non-carcinogenic and carcinogenic risks were below the safety limits (<1 and <10−5, respectively) according to national regulations. Notwithstanding, although formaldehyde levels were below the legal limits (<75 mg/kg) and health risks were within acceptable ranges, clothing may contain other toxic substances in addition to formaldehyde, thus increasing the risks. Finally, since no formaldehyde was detected in washed textile samples, a safe and simple practice for the consumers is to wash clothing before the first use.

Temperature and indoor environments

From the thermodynamic perspective, the term temperature is clearly defined for ideal physical systems: A unique temperature can be assigned to each black body via its radiation spectrum, and the temperature of an ideal gas is given by the velocity distribution of the molecules. While the indoor environment is not an ideal system, fundamental physical and chemical processes, such as diffusion, partitioning equilibria, and chemical reactions, are predictably temperature-dependent. For example, the logarithm of reaction rate and equilibria constants are proportional to the reciprocal of the absolute temperature. It is therefore possible to have non-linear, very steep changes in chemical phenomena over a relatively small temperature range. On the contrary, transport processes are more influenced by spatial temperature, momentum, and pressure gradients as well as by the density, porosity, and composition of indoor materials. Consequently, emergent phenomena, such as emission rates or dynamic air concentrations, can be the result of complex temperature-dependent relationships that require a more empirical approach. Indoor environmental conditions are further influenced by the thermal comfort needs of occupants. Not only do occupants have to create thermal conditions that serve to maintain their core body temperature, which is usually accomplished by wearing appropriate clothing, but also the surroundings must be adapted so that they feel comfortable. This includes the interaction of the living space with the ambient environment, which can vary greatly by region and season. Design of houses, apartments, commercial buildings, and schools is generally utility and comfort driven, requiring an appropriate energy balance, sometimes considering ventilation but rarely including the impact of temperature on indoor contaminant levels. In our article, we start with a review of fundamental thermodynamic variables and discuss their influence on typical indoor processes. Then, we describe the heat balance of people in their thermal environment. An extensive literature study is devoted to the thermal conditions in buildings, the temperature-dependent release of indoor pollutants from materials and their distribution in the various interior compartments as well as aspects of indoor chemistry. Finally, we assess the need to consider temperature holistically with regard to the changes to be expected as a result of global emergencies such as climate change.

A New Approach to Characterizing the Partitioning of Volatile Organic Compounds to Cotton Fabric

Chemical partitioning to surfaces can influence human exposure by various pathways, resulting in adverse health consequences. Clothing can act as a source, a barrier, or a transient reservoir for chemicals that can affect dermal and inhalation exposure rates. A few clothing-mediated exposure studies have characterized the accumulation of a select number of semi-volatile organic compounds (SVOCs), but systematic studies on the partitioning behavior for classes of volatile organic compounds (VOCs) and SVOCs are lacking. Here, the cloth-air equilibrium partition ratios (K_CA) for carbonyl, carboxylic acid, and aromatic VOC homologous series were characterized for cellulose-based cotton fabric, using timed exposures in a real indoor setting followed by online thermal desorption and nontargeted mass spectrometric analysis. The analyzed VOCs exhibit rapid equilibration within a day. Homologous series generally show linear correlations of the logarithm of K_CA with carbon number and the logarithms of the VOC vapor pressure and octanol-air equilibrium partition ratio (K_OA). When expressed as a volume-normalized partition ratio, log K_{CA_V} values are in a range of 5-8, similar to the values for previously measured SVOCs which have lower volatility. When expressed as surface area-normalized adsorption constants, K_{CA_S} values suggest that equilibration corresponds to a saturated surface coverage of adsorbed species. Aqueous solvation may occur for the most water-soluble species such as formic and acetic acids. Overall, this new experimental approach facilitates VOC partitioning studies relevant to environmental exposure.

Accumulation of polychlorinated biphenyls in fabrics in a contaminated building, and the effect of laundering

This research investigates sorption of PCBs to fabrics in a contaminated indoor environment and the effect of laundering on PCB removal from the fabrics. Eight articles of clothing were exposed to the air in a PCB-contaminated building. The background air concentration was 670 ng/m³ PCB_total with PCB-52 being the main congener. Air and fabric samples were collected for analysis before and periodically throughout the experiment. After 25 weeks, the remaining fabrics were washed and cut into three pieces each. One part was dried in the contaminated building, second in a PCB-free building and third in a mechanical drier. The PCB mass concentration increased during the first 6-10 weeks for all investigated fabrics, after which some fabrics approached equilibrium for more volatile congeners. Mass-normalized cloth-air partition coefficients were quantified for 9 congeners; for PCB-52, these ranged from 10^6.1 to 10^7.0 which were consistent with previously reported values. Partition coefficients of PCBs were observed to increase with their respective octanol-air partition coefficients. Washing and drying clothes resulted in the removal between 22% and 84% of PCBs. There was no difference in removal percentage after air-drying in clean or contaminated air. Drying in a mechanical drier removed significantly more PCBs than air-drying.

Chemical contaminant exposures assessed using silicone wristbands among occupants in office buildings in the USA, UK, China, and India

Little is known about chemical contaminant exposures of office workers in buildings globally. Complex mixtures of harmful chemicals accumulate indoors from building materials, building maintenance, personal products, and outdoor pollution. We evaluated exposures to 99 chemicals in urban office buildings in the USA, UK, China, and India using silicone wristbands worn by 251 participants while they were at work. Here, we report concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and other brominated flame retardants (BFRs), organophosphate esters (OPEs), phthalates and phthalate alternatives, pesticides, and polycyclic aromatic hydrocarbons (PAHs). First, we found major differences in office worker chemical exposures by country, some of which can be explained by regulations and use patterns. For example, exposures to several pesticides were substantially higher in India where there were fewer restrictions and unique malaria challenges, and exposures to flame retardants tended to be higher in the USA and UK where there were historic, stringent furniture flammability standards. Higher exposures to PAHs in China and India could be due to high levels of outdoor air pollution that penetrates indoors. Second, some office workers were still exposed to legacy PCBs, PBDEs, and pesticides, even decades after bans or phase-outs. Third, we identified exposure to a contemporary PCB that is not covered under legacy PCB bans due to its presence as an unintentional byproduct in materials. Fourth, exposures to novel BFRs, OPEs, and other chemicals commonly used as substitutes to previously phased-out chemicals were ubiquitous. Fifth, some exposures were influenced by individual factors, not just countries and buildings. Phthalate exposures, for example, were related to personal care product use, country restrictions, and building materials. Overall, we found substantial country differences in chemical exposures and continued exposures to legacy phased-out chemicals and their substitutes in buildings. These findings warrant further research on the role of chemicals in office buildings on worker health.

Effects of Polychlorinated Biphenyls on Animal Reproductive Systems and Epigenetic Modifications

Polychlorinated biphenyls (PCBs) are a group of highly toxic endocrine-disrupting chemicals comprising 209 homologs. PCBs are extensively found in the environment and can induce typical estrogenic and profound, long-lasting effects on animals. In this article, the introduction of PCB residues into the environment and the pathways of PCB enrichment in animals are described. PCBs are widely deposited and eventually accumulate in human tissues and body fluids through biomagnification. PCBs can significantly decrease animal fertility and interfere with endocrine processes, leading to the development of various diseases and even cancer. The effects of PCBs on the reproductive systems of animals can also be passed to their offspring, indicating that PCBs may affect the epigenetic modification process. There is currently no treatment to effectively inhibit the toxicity of PCBs in organisms; therefore, the severity of PCB toxicity needs to be widely recognized.

Sorption of PCB from air to settled house dust in a contaminated indoor environment

Investigation of human exposure pathways to PCB in a high-rise estate in Denmark motivated an experiment with sorption of PCB from air to settled house dust. Three sieved house dust samples (<75 μm) of different origin were exposed to elevated air concentrations of PCB in a vacated apartment from seven to 40 days. Within the 40 days, most of the dust samples were close to equilibrium for the congeners PCB-8 to -101 and dust-air partition coefficients were determined. The dust samples of different origin showed comparable partitioning, though small differences were seen. The determined partition coefficients were in agreement with values found in literature. Further, the partition coefficients were compared to three sets of predicted estimates based on absorption of PCB into the organic matter of the dust and octanol-air partition coefficients derived from different sources. Comparing measured and predicted values (log-log), two sets of predicted values showed strong correlation, though overestimated 20-40%, while one set showed similar absolute levels, but with a few deviating congeners. Dust-air ratios were calculated for samples taken from a field investigation in homes with elevated air concentrations of PCB in the high-rises. The partitioning in the field samples were in agreement with the results from the exposure experiment and indicate near steady state conditions for the congeners in the dust from the homes. Dust exposed directly on the floorboards showed lower concentrations than samples placed on foil, indicating an ongoing sorption to the varnish being a tertiary source contaminated by the air.

Transdermal uptake of benzophenone-3 from clothing: comparison of human participant results to model predictions

BACKGROUND

Models of transdermal uptake of chemicals from clothing have been developed, but not compared with recent human subject experiments. In a well-characterized experiment, participants wore t-shirts pre-dosed with benzophenone-3 (BP-3) and BP-3 and a metabolite were monitored in urine voids.

OBJECTIVE

Compare a dynamic model of transdermal uptake from clothing to results of the human subject experiment.

METHODS

The model simulating dynamic transdermal uptake from clothing was coupled with direct measurements of the gas phase concentration of benzophenone-3 (BP-3) near the surface of clothing to simulate the conditions of the human subject experiment.

RESULTS

The base-case model results were consistent with the those reported for human subjects. The results were moderately sensitive to parameters such as the diffusivity in the stratum corneum (SC), the SC thickness, and SC-air partition coefficient. The model predictions were most sensitive to the clothing fit. Tighter clothing worn during exposure period significantly increased excretion rates but tighter fit "clean" clothing during post-exposure period acts as a sink that reduces transdermal absorption by transferring BP-3 from skin surface lipids to clothing. The shape of the excretion curve was most sensitive to the diffusivity in the SC and clothing fit.

SIGNIFICANCE

This research provides further support for clothing as an important mediator of dermal exposure to environmental chemicals.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

Measuring exposure of e-waste dismantlers in Dhaka Bangladesh to organophosphate esters and halogenated flame retardants using silicone wristbands and T-shirts

Silicone (polydimethylsiloxane or PDMS) wristbands and cotton T-shirts were used to assess the exposure of e-waste recyclers in Dhaka, Bangladesh to polybrominated diphenyl ethers (PBDEs), novel brominated flame retardants (NBFRs), dechlorane plus (DPs), and organophosphate esters (OPEs). The median surface-normalized uptake rates of PBDEs, NBFRs, DPs, and OPEs were 170, 8.5, 4.8, and 270 ng/dm²/h for wristbands and 5.4, 2.0, 0.94, and 23 ng/dm²/h for T-shirts, respectively. Concentrations of Tris(2-chloroethyl) phosphate (TCEP), Tris(1,3-dichloro-2-propyl) phosphate (TDCIPP), Tri-m-cresyl phosphate (TmCP), Bis(2-ethlyhexyl) tetrabromophthalate (BEH-TEBP), and Dechlorane plus (DPs) in wristbands were significantly correlated with those in T-shirts. Wristbands accumulated ~7 times more mass than T-shirts, especially of compounds expected to be mainly in the gas phase. We introduce the silicone "sandwich" method to approximate the easily releasable fraction (ERF) from T-shirts, hypothesized to be related to dermal exposure. ERFs varied from 6 to 75% of total chemical accumulated by T-shirts and were significantly negatively correlated with compounds' octanol-air partition coefficient (log K_oa). The median daily exposure doses via dermal transfer from the front of the T-shirt to the front body trunk were 0.32, 0.13, 0.11, and 9.1 ng/kg-BW/day for PBDEs, NBFRs, DPs, and OPEs, respectively. The evidence of e-waste recycler exposure to flame retardants in this low income country, lacking protective personal equipment, calls for measures to minimize their exposure and for chemical management regulations to consider exposures to chemicals in waste products.

Oxidative contribution of air pollution to extrinsic skin ageing

•Epidemiological evidence links exposure to poor air quality to lentigines and wrinkles. •Experimental studies provide mechanistic explanations involving oxidative stress. •Polluted air may hasten skin ageing through indirect systemic effects via the lung and/or direct effects on cutaneous tissue. •Prevention measures would need to combine strategies that target both ‘routes’. •Air pollution is one of several environmental stressors that combined, may have additive/synergistic effects on the skin.

Halogenated Organic Pollutant Residuals in Human Bared and Clothing-Covered Skin Areas: Source Differentiation and Comprehensive Health Risk Assessment

To comprehensively clarify human exposure to halogenated flame retardants (HFRs) and polychlorinated biphenyls (PCBs) through dermal uptake and hand-to-mouth intake, skin wipe samples from four typical skin locations from 30 volunteers were collected. The total concentration of the target chemicals (24 HFRs and 16 PCBs) ranged from 203 to 4470 ng/m². BDE-209 and DBDPE accounted for about 37 and 40% of ∑₂₄HFRs, respectively, and PCB-41 and PCB-110 were the dominant PCB congeners, with proportion of 24 and 10%, respectively. Although exhibiting relatively lower concentrations of contaminants than bared skin locations, clothing-covered skin areas were also detected with considerable levels of HFRs and PCBs, indicating clothing to be a potentially significant exposure source. Significant differences in HFR and PCB levels and profiles were also observed between males and females, with more lower-volatility chemicals in male-bared skin locations and more higher-volatility compounds in clothing-covered skin locations of female participants. The mean estimated whole-body dermal absorption doses of ∑₈HFRs and ∑₁₆PCBs (2.9 × 10^-4 and 6.7 × 10^-6 mg/kg·d) were 1-2 orders of magnitude higher than ingestion doses via hand-to-mouth contact (6.6 × 10^-7 and 3.1 × 10^-7 mg/kg·d). The total noncarcinogenic health risk resulted from whole-body dermal absorption and oral ingestion to ∑₇HFRs and ∑₁₆PCBs were 5.2 and 0.35, respectively.

Phthalates in infant cotton clothing: Occurrence and implications for human exposure

Clothing easily adsorbed the chemicals in the environment, and became a source of human exposure to chemicals. However, large contacted surface area and long exposure duration have elevated human exposure to chemicals from clothing, such as phthalates. Among them, cotton clothing, which infants prefer to wear, has been proven to adsorb phthalates more easily than other fabrics. While infants are developing, they are easily affected by phthalates. In this study, in order to study accumulation of phthalates in infant cotton clothing during the whole process from production to the first wearing, 24 infant cotton clothing samples were collected from shopping malls in Harbin, China. High detection rates and concentrations suggest that phthalates in the environment are widely adsorbed to infant cotton clothing, and traditional laundering for infant clothing cannot remove phthalates completely. The median concentration of the total phthalates was 4.15 μg/g. Di-(2-ethylhexyl) phthalate (DEHP) has become the dominant phthalate. For the estimated daily intakes (EDIs) for infants, dibutyl phthalate (DBP) had the highest contribution, followed by di-iso-butyl phthalate (DiBP) and DEHP. Dermal absorption has become the main route of infant exposure to phthalates, and ingestion contributed very little. The result of comparing with the EDIs via dermal absorption from house air and dust suggests that clothing plays an important role of dermal absorption exposure to phthalates. For risk assessment, the carcinogenic risk of BBP and DEHP indicates that the level of DEHP in infant cotton clothing might pose potential adverse effects to infant health.

Involvement of 4-hydroxy-2-nonenal in pollution-induced skin damage

The effects of environmental insults on human health are a major global concern. Some of the most noxious pollutants that humans are exposed to include ozone (O₃ ), particulate matter (PM), and cigarette smoke (CS). Since the skin is the first line of defense against environmental insults, it is considered one of the main target organs for the harmful insults of air pollution. Thus, there is solid evidence that skin pathologies such as premature aging, atopic dermatitis (AD), and psoriasis are associated with pollutant exposure; all of these skin conditions are also associated with an altered redox status. Therefore, although the mechanisms of action and concentrations of O₃ , PM, and CS that we are exposed to differ, exposure to all of these pollutants is associated with the development of similar skin conditions due to the fact that all of these pollutants alter redox homeostasis, increasing reactive oxygen species production and oxidative stress. A main product of oxidative stress, induced by exposure to the aforementioned pollutants, is 4-hydroxy-2-nonenal (HNE), which derives from the oxidation of ω-6 polyunsaturated fatty acids. HNE is a highly reactive compound that can form adducts with cellular proteins and even DNA; it is also an efficient cell signaling molecule able to regulate mitogen-activated protein kinase pathways and the activity of redox-sensitive transcription factors such as Nrf2, AP1, and NFκB. Therefore, increased levels of HNE in the skin, in response to pollutants, likely accelerates skin aging and exacerbates existing skin inflammatory conditions; thus, targeting HNE formation could be an innovative cosmeceutical approach for topical applications.

Widespread Occurrence of Bisphenol A in Daily Clothes and Its High Exposure Risk in Humans

Bisphenol A (BPA) is an important endocrine disrupting chemical. Although high levels of BPA in some new clothes have been reported, the occurrence of bisphenol chemicals including BPA in daily clothes is still unknown, and the human exposure to BPA in clothes has not been well assessed. In this study, used/washed clothes were collected from residents' wardrobes and the concentrations of BPA and its analogues were detected. BPA was present in all the used clothes at concentrations ranging from <3.30 to 471 ng/g (median: 34.2 ng/g; mean ± SD: 57.5 ± 93.6 ng/g), while bisphenol S was also detected in 29% of the samples. Although higher average concentration (88.4 ± 289 ng/g) and maximum concentration (1823 ng/g) of BPA were found in the new clothes, the median concentration of BPA in the used clothes (34.2 ng/g) was even higher than that in the new clothes (17.7 ng/g). Cross contamination of BPA during laundering was identified by a simulated laundry experiment, which explained the homogenizing tendency of bisphenol contaminants in the used clothes. An estimated dermal exposure dose of 52.1 ng/kg BW/d was obtained for BPA exposure in children from the highly polluted sweaty clothes (with BPA concentration of 199 ng/g). This indicates a relatively high exposure risk in humans. Compared to other exposure routes, the contribution of dermal exposure dose of BPA from the daily clothes should not be neglected.

Clothing-Mediated Exposures to Chemicals and Particles

A growing body of evidence identifies clothing as an important mediator of human exposure to chemicals and particles, which may have public health significance. This paper reviews and critically assesses the state of knowledge regarding how clothing, during wear, influences exposure to molecular chemicals, abiotic particles, and biotic particles, including microbes and allergens. The underlying processes that govern the acquisition, retention, and transmission of clothing-associated contaminants and the consequences of these for subsequent exposures are explored. Chemicals of concern have been identified in clothing, including byproducts of their manufacture and chemicals that adhere to clothing during use and care. Analogously, clothing acts as a reservoir for biotic and abiotic particles acquired from occupational and environmental sources. Evidence suggests that while clothing can be protective by acting as a physical or chemical barrier, clothing-mediated exposures can be substantial in certain circumstances and may have adverse health consequences. This complex process is influenced by the type and history of the clothing; the nature of the contaminant; and by wear, care, and storage practices. Future research efforts are warranted to better quantify, predict, and control clothing-related exposures.

Impacts of texture properties and airborne particles on accumulation of tobacco-derived chemicals in fabrics

Vapor-phase constituents of tobacco smoke are known to accumulate on clothing surfaces; however, the significance of texture properties, such as specific surface area, porosity, and surface roughness, and airborne particles to the sorption capacity of fabrics has not been adequately addressed. In the present study, cotton (t-shirt) and polyester (pajama and lab coat) fabrics were exposed to cigarette smoke containing gaseous and particulate tobacco-derived compounds (e.g., N-nitrosamines). Fabric-air distribution coefficients and particle deposition fluxes were then determined to evaluate the accumulation of the target analytes. Appreciable amounts of N'-nitrosoanabasine (NAB) and 4'-(nitrosomethylamino)-1-(3-pyridyl)-1-butanone (NNK) were detected in all three fabric types although particle-bound NAB and NNK were found only in cigarette smoke. In addition, the root mean square surface roughness heights for three types of clothes were within the same order of magnitude. As such, the deposition fluxes of particle-bound N'-nitrosonornicotine (NNN) and NNK to fabric surface may have contributed to 6-20% and 56-100% of total NNN and NNK in fabrics, respectively, estimated based on the assumed deposition velocity of 0.65 m h^-1. Apparently, the sorption capacity of fabrics can be greatly influenced by particle-bound compounds on clothing surfaces, resulting in either over- or under-estimation of fabric-air distribution/partitioning coefficients.

Size distribution and clothing-air partitioning of polycyclic aromatic hydrocarbons generated by barbecue

Barbecue (BBQ) is one of the most popular cooking activities with charcoal worldwide and produces abundant polycyclic aromatic hydrocarbons (PAHs) and particulate matter. Size distribution and clothing-air partitioning of particle-bound PAHs are significant for assessing potential health hazards to humans due to exposure to BBQ fumes, but have not been examined adequately. To address this issue, particle and gaseous samples were collected at 2-m and 10-m distances from a cluster of four BBQ stoves. Personal samplers and cotton clothes were carried by volunteers sitting near the BBQ stoves. Particle-bound PAHs (especially 4-6 rings) derived from BBQ fumes were mostly affiliated with fine particles in the size range of 0.18-1.8 μm. High molecular-weight PAHs were mostly unimodal peaking in fine particles and consequently had small geometric mean diameters and standard deviations. Source diagnostics indicated that particle-bound PAHs in BBQ fumes were generated primarily by combustion of charcoal, fat content in food, and oil. The influences of BBQ fumes on the occurrence of particle-bound PAHs decreased with increasing distance from BBQ stoves, due to increased impacts of ambient sources, especially by petrogenic sources and to a lesser extent by wind speed and direction. Octanol-air and clothing-air partition coefficients of PAHs obtained from personal air samples were significantly correlated to each other. High molecular-weight PAHs had higher area-normalized clothing-air partition coefficients in cotton clothes, i.e., cotton fabrics may be a significant reservoir of higher molecular-weight PAHs.

CAPSULE

Particle-bound PAHs from barbecue fumes are generated largely from charcoal combustion and food-charred emissions and mainly affiliated with fine particles.

Indoor Chemistry

This review aims to encapsulate the importance, ubiquity, and complexity of indoor chemistry. We discuss the many sources of indoor air pollutants and summarize their chemical reactions in the air and on surfaces. We also summarize some of the known impacts of human occupants, who act as sources and sinks of indoor chemicals, and whose activities (e.g., cooking, cleaning, smoking) can lead to extremely high pollutant concentrations. As we begin to use increasingly sensitive and selective instrumentation indoors, we are learning more about chemistry in this relatively understudied environment.