Size-resolved emission rates of airborne bacteria and fungi in an occupied classroom

Urban soils immobilize harmful microbes and antibiotic resistance genes

Exposure to harmful microbiomes and antibiotic resistance genes (ARGs) can negatively affect human health. However, the contribution of vegetation and soils to the airborne microbiota transferred indoors (AMTI) remains unclear. We used our newly-developed airborne microbial sampler (VenTube) to collect AMTI samples from 72 neighborhoods in Shanghai. The AMTI sampling coincided with simultaneous adjacent phyllosphere and soil microbes. We characterized the microbial communities using next-generation sequencing and quantitative PCR, and employed traceability analysis to identify the sources of AMTI. Our findings revealed that both bacterial and fungal communities in AMTI predominantly originated from phyllosphere, which was estimated to contribute up to 52.3 % and 67.2 % of the bacterial and fungal communities, respectively. Notably, there was extensive co-transfer of potential human pathogens (PHP) between phyllosphere microbes and AMTI. Surprisingly, although the soil harbored higher levels of PHP and respiratory diseases (RDs)-associated ARGs than AMTI, it contained fewer RDs-associated microbes overall. Furthermore, soil sulfur enrichment due to an increase in Ligustrum trees influenced the release of RDs-associated microorganisms from the soil. Collectively, our study emphasizes that the elevated levels of RDs-associated microbes in AMTI primarily derived from phyllosphere microbes. We also highlight that soils may limit the spread of RDs-associated microbes and ARGs.

New generation sequencing: molecular approaches for the detection and monitoring of bioaerosols in an indoor environment: a systematic review

INTRODUCTION

The exposure of occupants to indoor air pollutants has increased in recent decades. The aim of this review is to discuss an overview of new approaches that are used to study fungal aerosols. Thus, this motivation was to compensate the gaps caused by the use of only traditional approaches in the study of fungal exposure.

CONTENT

The search involved various databases such as; Science Direct, PubMed, SAGE, Springer Link, EBCOHOST, MEDLINE, CINAHL, Cochrane library, Web of Science and Wiley Online Library. It was limited to full text research articles that reported the use of non-viable method in assessing bioaerosol, written in English Language, full text publications and published from year 2015-2022.

SUMMARY AND OUTLOOK

A total of 15 articles met the inclusion criteria and was included in this review. The use of next-generation sequencing, which is more commonly referred to as high-throughput sequencing (HTS) or molecular methods in microbial studies is based on the detection of genetic material of organisms present in a given sample. Applying these methods to different environments permitted the identification of the microorganisms present, and a better comprehension of the environmental impacts and ecological roles of microbial communities. Based on the reviewed articles, there is evidence that dust samples harbour a high diversity of human-associated bacteria and fungi. Molecular methods such as next generation sequencing are reliable tools for identifying and tracking the bacterial and fungal diversity in dust samples using 18S metagenomics approach.

Potential effects of indoor microbiome characteristics on health: A systematic review

OBJECTIVES

This systematic review aims to assess the potential effects of exposure to microbial agents in the indoor environment on health outcomes.

STUDY DESIGN

Systematic review.

METHODS

A systematic literature search was conducted on Embase, PubMed, and Web of Science through January 2024, and reference lists of relevant articles were reviewed. Studies that investigated the relationship between indoor microbial agents and human symptoms and diseases were eligible for inclusion.

RESULTS

In total, 20 articles were considered eligible for inclusion and reported consistency and variability in the health effects of indoor microorganisms. In microbial diversity analyses, studies showed an increasing trend in microbial α-diversity in patients with allergic and inflammatory diseases and a decreasing trend in fungal α-diversity in patients with behavioral and cognitive disorders. In microbial composition analyses, phylum Cyanobacteria, genus Izhakiella, genus Rhodomicrobiu, species Aeromonas enteropelogenes, and species Brasilonema bromeliae showed a decreasing trend in allergic and inflammatory diseases, while phylum Actinomycetota, phylum Bacillota, phylum Bacteriodota, class Gammaproteobacteria and species Deinococcus gobiensis showed an increasing trend. There were fewer consistent results for respiratory infectious diseases and behavioral and cognitive disorders.

CONCLUSION

To our knowledge, this is the first systematic review of the association between indoor microbial exposure and human health risk. In this systematic review, we explored the potential impact of microbiota characterization of indoor environments on different diseases or symptoms from the perspective of microbial taxonomic levels through a comprehensive review of differential analysis of indoor microbiota diversity and composition, which provided potential intervention strategies for the management of the indoor microbiome.

The indoors microbiome and human health

Indoor environments serve as habitat for humans and are replete with various reservoirs and niches for microorganisms. Microorganisms enter indoor spaces with their human and non-human hosts, as well as via exchange with outdoor sources, such as ventilation and plumbing. Once inside, many microorganisms do not survive, especially on dry, barren surfaces. Even reduced, this microbial biomass has critical implications for the health of human occupants. As urbanization escalates, exploring the intersection of the indoor environment with the human microbiome and health is increasingly vital. The indoor microbiome, a complex ecosystem of microorganisms influenced by human activities and environmental factors, plays a pivotal role in modulating infectious diseases and fostering healthy immune development. Recent advancements in microbiome research shed light on this unique ecological system, highlighting the need for innovative approaches in creating health-promoting living spaces. In this Review, we explore the microbial ecology of built environments - places where humans spend most of their lives - and its implications for immune, endocrine and neurological health. We further propose strategies to harness the indoor microbiome for better health outcomes.

Predicting how varying moisture conditions impact the microbiome of dust collected from the International Space Station

BACKGROUND

The commercialization of space travel will soon lead to many more people living and working in unique built environments similar to the International Space Station, which is a specialized closed environment that contains its own indoor microbiome. Unintended microbial growth can occur in these environments as in buildings on Earth from elevated moisture, such as from a temporary ventilation system failure. This growth can drive negative health outcomes and degrade building materials. We need a predictive approach for modeling microbial growth in these critical indoor spaces.

RESULTS

Here, we demonstrate that even short exposures to varying elevated relative humidity can facilitate rapid microbial growth and microbial community composition changes in dust from spacecraft. We modeled fungal growth in dust from the International Space Station using the time-of-wetness framework with activation and deactivation limited growth occurring at 85% and 100% relative humidity, respectively. Fungal concentrations ranged from an average of 4.4 × 106 spore equivalents per milligram of dust in original dust with no exposure to relative humidity to up to 2.1 × 1010 when exposed to 100% relative humidity for 2 weeks. As relative humidity and time-elevated increased, fungal diversity was significantly reduced for both alpha (Q < 0.05) and beta (R2 = 0.307, P = 0.001) diversity metrics. Bacteria were unable to be modeled using the time-of-wetness framework. However, bacterial communities did change based on constant relative humidity incubations for both beta (R2 = 0.22, P = 0.001) and alpha diversity decreasing with increasing moisture starting at 85% relative humidity (Q < 0.05).

CONCLUSION

Our results demonstrate that moisture conditions can be used to develop and predict changes in fungal growth and composition onboard human-occupied spacecraft. This predictive model can be expanded upon to include other spacecraft environmental factors such as microgravity, elevated carbon dioxide conditions, and radiation exposure. Understanding microbial growth in spacecraft can help better protect astronaut health, fortify spacecraft integrity, and promote planetary protection as human activity increases in low-Earth orbit, the moon, Mars, and beyond. Video Abstract.

Temporal changes in the size resolved fractions of bacterial aerosols in urban and semi-urban residences

Despite the significant amount of time spent in the domestic environment, culture-independent size distribution data of bioaerosols are largely missing. This study investigated the temporal changes in size-resolved bacterial aerosols in urban and semi-urban residential settings. Overall, airborne bacterial taxa identified in both sites were dispersed across particles of various sizes. qPCR analysis showed that outdoors bacteria dominated particles > 8 μm, whilst indoor bacterial loadings were greater with 1-2 μm (winter) and 2-4 μm (summer) ranges. Indoor and outdoor aerosols harboured distinct bacterial communities due to the dominance of human-associated taxa (Staphylococcus, Micrococcus, Corynebacterium) in indoor air. The aerosol microbiome exhibited significant temporal variation, with Actinobacteria, Gammaproteobacteria and Bacilli predominant indoors, whereas Actinobacteria, Alphaproteobacteria and Gammaproteobacteria were the most abundant taxa outdoors. The variation between the two residences was mostly driven by particles < 2 μm, whereas differences between indoors and outdoors were mostly influenced by particles > 2 μm. Source-tracking analysis estimated that household surfaces accounted for the greatest source proportion of bacteria, surpassing that of outdoor air, which varied due to natural ventilation throughout the year. Our findings provide new insights into the factors governing the aerosol microbiome in residential environments which are crucial for exposure assessment.

A case study showing highly traceable sources of bacteria on surfaces of university buildings

University students predominantly spend their time indoors, where prolonged exposure raises the risk of contact with microorganisms of concern. However, our knowledge about the microbial community characteristics on university campus and their underpinnings is limited. To address it, we characterized bacterial communities from the surfaces of various built environments typical of a university campus, including cafeterias, classrooms, dormitories, offices, meeting rooms, and restrooms, in addition to human skin. The classrooms harbored the highest α-diversity, while the cafeterias had the lowest α-diversity. The bacterial community composition varied significantly across different building types. Proteobacteria, Actinobacteria, Firmicutes, Bacteroidetes, and Cyanobacteria were common phyla in university buildings, accounting for more than 90 % of total abundance. Staphylococcus aureus was the most abundant potential pathogen in classrooms, dormitories, offices, restrooms, and on human skin, indicating a potential risk for skin disease infections in these buildings. We further developed a new quantitative pathogenic risk assessment method according to the threat of pathogens to humans and found that classrooms exhibited the highest potential risk. The fast expectation-maximization algorithm identified 59 %-86 % of bacterial sources in buildings, with the human skin as the largest bacterial source for most buildings. As the sources of bacteria were highly traceable, we showed that homogeneous selection, dispersal limitation, and ecological drift were major ecological forces that drove community assembly. Our findings have important implications for predicting the distribution and sources of indoor dust bacterial communities on university campus.

Association among polydisperse aerodynamic size of bioaerosols, biodiversity and urbanization in kindergartens

The aerodynamic sizes of bioaerosols may significantly affect their behaviors, respiratory deposition and biodiversity. The respirable bacterial size, biodiversity, and human-associated bacteria (HAB) related bioaerosols were evaluated at three kindergartens in Taiwan. Kindergartens A, B, and C were in urban, semi-urban, and rural areas, respectively. A six-stage viable Andersen cascade impactor was used to collect bioaerosols and to determine their size distributions. The geometric mean diameter (GMD), geometric standard deviation (GSD), heat maps, and uniformity were used to evaluate the association of bacteria characteristics. A BD Phoenix-100 automated interpretation system was used to identify the airborne bacteria species. The results revealed that 1425 colonies of the sampled airborne bacteria contained 63 species in 29 genera, and overall, 63.0% were HABs. The most abundant phylum was Actinobacteria (56.6 ± 22.2%) and Firmicutes (31.6 ± 22.3%), and from the taxonomic analysis, both airborne Micrococcus and the Staphylococcus aureus are the dominant genus. All the bacteria aerodynamic particle size distributions were polydisperse distributions. The heat map and uniformity analysis had revealed most of the sampled bioaerosols distributed between 1.1-3.3 μm, and most of the polydisperse airborne Streptococcus spp. had a size in the respirable range, due to urbanization, they have potentially contributed to respiratory risk in the kindergartens. The Shannon diversity index (H) and inverse Simpson diversity index (D) of the bioaerosols in urban kindergarten were negatively correlated with GMD and GSD. The Pearson correlations revealed that the kindergarten in the rural area, with a higher temperature, a lower relative humidity, and a lower CO2 concentration than the others, tended to have the largest H and D values (P < 0.05). Multiple and stepwise regression revealed that bioaerosol aerodynamic size was statistically significantly correlated with H (P = 0.001) and D values (P = 0.002). This study sheds light on the characteristics of bioaerosols and their associations with microbiome.

Transmission of human-pet antibiotic resistance via aerosols in pet hospitals of Changchun

In recent years, aerosols have been recognized as a prominent medium for the transmission of antibiotic-resistant bacteria and genes. Among these, particles with a particle size of 2 μm (PM2.5) can directly penetrate the alveoli. However, the presence of antibiotic-resistant genes in aerosols from pet hospitals and the potential risks posed by antibiotic-resistant bacteria in these aerosols to humans and animals need to be investigated. In this study, cefotaxime-resistant bacteria were collected from 5 representative pet hospitals in Changchun using a Six-Stage Andersen Cascade Impactor. The distribution of bacteria in each stage was analyzed, and bacteria from stage 5 and 6 were isolated and identified. Minimal inhibitory concentrations of isolates against 12 antimicrobials were determined using broth microdilution method. Quantitative Polymerase Chain Reaction was employed to detect resistance genes and mobile genetic elements that could facilitate resistance spread. The results indicated that ARBs were enriched in stage 5 (1.1-2.1 μm) and stage 3 (3.3-4.7 μm) of the sampler. A total of 159 isolates were collected from stage 5 and 6. Among these isolates, the genera Enterococcus spp. (51%), Staphylococcus spp. (19%), and Bacillus spp. (14%) were the most prevalent. The isolates exhibited the highest resistance to tetracycline and the lowest resistance to cefquinome. Furthermore, 56 (73%) isolates were multidrug-resistant. Quantitative PCR revealed the expression of 165 genes in these isolates, with mobile genetic elements showing the highest expression levels. In conclusion, PM2.5 from pet hospitals harbor a significant number of antibiotic-resistant bacteria and carry mobile genetic elements, posing a potential risk for alveolar infections and the dissemination of antibiotic resistance genes.

Fungal diversity differences in the indoor dust microbiome from built environments on earth and in space

Human occupied built environments are no longer confined to Earth. In fact, there have been humans living and working in low-Earth orbit on the International Space Station (ISS) since November 2000. With NASA's Artemis missions and the age of commercial space stations set to begin, more human-occupied spacecraft than ever will be in Earth's orbit and beyond. On Earth and in the ISS, microbes, especially fungi, can be found in dust and grow when unexpected, elevated moisture conditions occur. However, we do not yet know how indoor microbiomes in Earth-based homes and in the ISS differ due to their unique set of environmental conditions. Here we show that bacterial and fungal communities are different in dust collected from vacuum bags on Earth and the ISS, with Earth-based homes being more diverse (465 fungal OTUs and 237 bacterial ASVs) compared to the ISS (102 fungal OTUs and 102 bacterial ASVs). When dust from these locations were exposed to varying equilibrium relative humidity conditions (ERH), there were also significant fungal community composition changes as ERH and time elevated increased (Bray Curtis: R2 = 0.35, P = 0.001). These findings can inform future spacecraft design to promote healthy indoor microbiomes that support crew health, spacecraft integrity, and planetary protection.

Human emissions of size-resolved fluorescent bioaerosols in control situations

Human bioaerosols contribute significantly to indoor air quality. This study used a Wideband Integrated Bioaerosol Sensor (WIBS-4A) instrument for real-time measurement of particle size distribution and count to differentiate fluorescent bioaerosols from non-fluorescent aerosols. Through an experiment involving 12 subjects (six men and six women) wearing standard cotton clothing in a 2 m × 2 m × 2 m environmental chamber, we established a quantitative method to obtain the bioaerosol emission rate of a single subject, aiming to explore the effects of masks and sex on bioaerosol emissions from different individuals. The mean emission rates of fluorescent bioaerosols in the particle size ranges of 0.5-2.5 μm and 2.5-10 μm were 3.192±2.11×104 counts/(person·h) and 13.98±9.34×104 counts/(person·h), respectively. A comparison between those wearing and not wearing masks revealed no significant differences in the emissions of fluorescent bioaerosols. This suggests respiratory sources may not significantly impact the emissions of fluorescent bioaerosols from individuals under seated breathing conditions. Significant disparities in the fluorescent bioaerosol emission rates of different biological sexes were observed through independent sample analysis. Males exhibited 41 % and 15 % higher emission rates than females for particle size ranges of 0.5-2.5 μm and 2.5-10 μm, respectively, possibly because of different metabolic rates. A significant correlation between metabolic rates and fluorescent bioaerosols (sig = 0.044 < 0.05) was observed in all the subjects. These findings underscore the individual variations that affect bioaerosol emission rates. The data provided by this study will facilitate further analysis of the on-site measured data and source analysis.

Effects of surface-attached durations, nutrients, and relative humidity on the resuspension of bacteria during human walking

Resuspension caused by human walking activities is an important source of indoor bioaerosols and has been associated with health effects such as allergies and asthma. However, it is unknown whether inhalation of resuspended bioaerosols is an important exposure pathway for airborne infection. Also, crucial factors influencing the resuspension of settled microbes have not been quantified. In this study, we experimentally investigated the resuspension of culturable bacteria from human-stepping on polyvinyl chloride (PVC) flooring under different conditions. We determined the bacterial resuspension emission factor (ER), a normalized resuspension parameter for the ratio of resuspended mass in the air to the mass of settled particles, for two common bacteria, Escherichia coli and Salmonella enterica. The investigation involved varying factors such as microbial surface-attached durations (0, 1, 2, and 3 days), the absence or presence of nutrients on flooring surfaces, and changes in relative humidity (RH) (35%, 65%, and 85%). The results showed that, in the absence of nutrients, the highest ER values for E. coli and S. enterica were 3.8 × 10-5 ± 5.2 × 10-6 and 5.3 × 10-5 ± 6.0 × 10-6, respectively, associated with surface-attached duration of 0 days. As the surface-attached duration increased from 0 to 3 days, ER values decreased by 92% and 84% for E. coli and S. enterica, respectively. In addition, we observed that ER values decreased with the increasing RH, which is consistent with particle adhesion theory. This research offers valuable insights into microbial resuspension during human walking activities and holds the potential for assisting in the assessment and estimation of risks related to human exposure to bioaerosols.

Differential impact of environmental factors on airborne live bacteria and inorganic particles in an underground walkway

We previously reported that variations in the number and type of bacteria found in public spaces are influenced by environmental factors. However, based on field survey data alone, whether the dynamics of bacteria in the air change as a result of a single environmental factor or multiple factors working together remains unclear. To address this, mathematical modeling may be applied. We therefore conducted a reanalysis of the previously acquired data using principal component analysis (PCA) in conjunction with a generalized linear model (Glm2) and a statistical analysis of variance (ANOVA) test employing the χ2 distribution. The data used for the analysis were reused from a previous public environmental survey conducted at 8:00-20:00 on May 2, June 1, and July 5, 2016 (regular sampling) and at 5:50-7:50 and 20:15-24:15 on July 17, 2017 (baseline sampling) in the Sapporo underground walking space, a 520-meter-long underground walkway. The dataset consisted of 60 samples (22 samples for "bacterial flora"), including variables such as "temperature (T)," "humidity (H)," "atmospheric pressure (A)," "traffic pedestrians (TP)," "number of inorganic particles (Δ5: 1-5 μm)," "number of live airborne bacteria," and "bacterial flora." Our PCA with these environmental factors (T, H, A, and TP) revealed that the 60 samples could be categorized into four groups (G1 to G4), primarily based on variations in PC1 [Loadings: T(-0.62), H(-0.647), TP(0.399), A(0.196)] and PC2 [Loadings: A(-0.825), TP(0.501), H(0.209), T(-0.155)]. Notably, the number of inorganic particles significantly increased from G4 to G1, but the count of live bacteria was highest in G2, with no other clear pattern. Further analysis with Glm2 indicated that changes in inorganic particles could largely be explained by two variables (H/TP), while live bacteria levels were influenced by all explanatory variables (TP/A/H/T). ANOVA tests confirmed that inorganic particles and live bacteria were influenced by different factors. Moreover, there were minimal changes in bacterial flora observed among the groups (G1-G4). In conclusion, our findings suggest that the dynamics of live bacteria in the underground walkway differ from those of inorganic particles and are regulated in a complex manner by multiple environmental factors. This discovery may contribute to improving public health in urban settings.

The BioCascade Impactor: A novel device for direct collection of size-fractionated bioaerosols into liquid medium

The ability to collect size-fractionated airborne particles that contain viable bacteria and fungi directly into liquid medium while also maintaining their viability is critical for assessing exposure risks. In this study, we present the BioCascade impactor, a novel device designed to collect airborne particles into liquid based on their aerodynamic diameter in three sequential stages (>9.74 μm, 3.94-9.74 μm, and 1.38-3.94 μm when operated at 8.5 L/min). Aerosol samples containing microorganisms - either Saccharomyces kudriavzevii or Micrococcus luteus, were used to evaluate the performance of the BioCascade (BC) paired with either the VIable Virus Aerosol Sampler (VIVAS) or a gelatin filter (GF) as stage 4 to collect particles <1.38 μm. Stages 2 and 3 collected the largest fractions of viable S. kudriavzevii when paired with VIVAS (0.468) and GF (0.519), respectively. Stage 3 collected the largest fraction of viable M. luteus particles in both BC+VIVAS (0.791) and BC+GF (0.950) configurations. The distribution function of viable microorganisms was consistent with the size distributions measured by the Aerodynamic Particle Sizer. Testing with both bioaerosol species confirmed no internal loss and no re-aerosolization occurred within the BC. Irrespective of the bioaerosol tested, stages 1, 3 and 4 maintained ≥80% of viability, while stage 2 maintained only 37% and 73% of viable S. kudriavzevii and M. luteus, respectively. The low viability that occurred in stage 2 warrants further investigation. Our work shows that the BC can efficiently size-classify and collect bioaerosols without re-aerosolization and effectively maintain the viability of collected microorganisms.

Biocontrol in built environments to reduce pathogen exposure and infection risk

The microbiome of the built environment comprises bacterial, archaeal, fungal, and viral communities associated with human-made structures. Even though most of these microbes are benign, antibiotic-resistant pathogens can colonize and emerge indoors, creating infection risk through surface transmission or inhalation. Several studies have catalogued the microbial composition and ecology in different built environment types. These have informed in vitro studies that seek to replicate the physicochemical features that promote pathogenic survival and transmission, ultimately facilitating the development and validation of intervention techniques used to reduce pathogen accumulation. Such interventions include using Bacillus-based cleaning products on surfaces or integrating bacilli into printable materials. Though this work is in its infancy, early research suggests the potential to use microbial biocontrol to reduce hospital- and home-acquired multidrug-resistant infections. Although these techniques hold promise, there is an urgent need to better understand the microbial ecology of built environments and to determine how these biocontrol solutions alter species interactions. This review covers our current understanding of microbial ecology of the built environment and proposes strategies to translate that knowledge into effective biocontrol of antibiotic-resistant pathogens.

Microbiology of the built environment: harnessing human-associated built environment research to inform the study and design of animal nests and enclosures

SUMMARYOver the past decade, hundreds of studies have characterized the microbial communities found in human-associated built environments (BEs). These have focused primarily on how the design and use of our built spaces have shaped human-microbe interactions and how the differential selection of certain taxa or genetic traits has influenced health outcomes. It is now known that the more removed humans are from the natural environment, the greater the risk for the development of autoimmune and allergic diseases, and that indoor spaces can be harsh, selective environments that can increase the emergence of antimicrobial-resistant and virulent phenotypes in surface-bound communities. However, despite the abundance of research that now points to the importance of BEs in determining human-microbe interactions, only a fraction of non-human animal structures have been comparatively explored. It is here, in the context of human-associated BE research, that we consider the microbial ecology of animal-built natural nests and burrows, as well as artificial enclosures, and point to areas of primary interest for future research.

Bacterial viability in the built environment of the home

The built environment (BE) consists of human-made structures and, much like living organisms, is colonized by bacteria that make up the BE microbiome. The BE microbiome can potentially affect human health because of the constant proximity of these bacteria to humans. This has led to increasing public concern of whether the bacteria in the BE are harmful. Previous studies have used approaches based on DNA sequencing to assess the composition of the BE microbiome. However, the extent to which the bacterial DNA in the BE represents viable bacterial cells that could infect human hosts remains unknown. To address this open question we used both culture-based and culture-independent molecular methods to profile bacterial viability of the microbiomes from several BE sites. As part of an undergraduate-led project, we found that the vast majority of the bacterial DNA from the BE is not associated with viable bacteria, suggesting that most bacteria in the BE are dead. To begin to understand the determinants of bacterial viability in the BE we used mock bacterial communities to investigate the effects of temperature, relative humidity, and human interaction on bacterial viability. We found that relative humidity, temperature, and surface material did not have statistically significant effects on BE microbiome viability, but environmental exposure decreased bacterial viability. These results update our conception of the BE microbiome and begin to define the factors that affect BE microbiome viability.

Bioaerosol assessment in indoor and outdoor environments: a case study from India

Exposure to bioaerosols has been associated with the occurrence of a variety of health impacts, including infectious illnesses, acute toxic effects, allergies, and cancer. This study aimed at evaluating airborne bacteria and fungi populations at different indoor and outdoor sites on a college campus in Bengaluru, India. Bioaerosol samples were collected using a two-stage Andersen air sampler; and isolates were identified using standard procedures. Six air samples and meteorological data were collected in March and April 2014 to examine the effects of temperature and relative humidity on bioaerosol concentration using linear regression modeling. Among all sites, the canteen showed the highest bioaerosol levels both indoors and outdoors. Specific bacterial identification was not possible, but gram staining and microscopic analysis helped to identify gram positive and gram negative bacteria. The most prevalent fungal species in the samples were Cladosporium, Aspergillus niger, Penicillium, Rhizopus, Fusarium, Mucor, and Alternaria. Due to the impact of weather conditions, such as temperature and relative humidity, the bioaerosol concentration varied greatly at each site according to the regression model. The indoor bioaerosol concentrations at all sites exceeded the values established by the American Industrial Hygiene Association (< 250 CFU/m3 for total fungi and < 500 CFU/m3 for total bacteria). Higher concentrations of bioaerosols may be attributed to the transportation of microbes from the ground surface to suspended particles, the release of microbes from the respiratory tract, higher rate of shredding of human skin cells, and many other factors.

Indoor Airborne Microbiome and Endotoxin: Meteorological Events and Occupant Characteristics Are Important Determinants

Airborne bacteria and endotoxin may affect asthma and allergies. However, there is limited understanding of the environmental determinants that influence them. This study investigated the airborne microbiomes in the homes of 1038 participants from five cities in Northern Europe: Aarhus, Bergen, Reykjavik, Tartu, and Uppsala. Airborne dust particles were sampled with electrostatic dust fall collectors (EDCs) from the participants' bedrooms. The dust washed from the EDCs' clothes was used to extract DNA and endotoxin. The DNA extracts were used for quantitative polymerase chain (qPCR) measurement and 16S rRNA gene sequencing, while endotoxin was measured using the kinetic chromogenic limulus amoebocyte lysate (LAL) assay. The results showed that households in Tartu and Aarhus had a higher bacterial load and diversity than those in Bergen and Reykjavik, possibly due to elevated concentrations of outdoor bacterial taxa associated with low precipitation and high wind speeds. Bergen-Tartu had the highest difference (ANOSIM R = 0.203) in β diversity. Multivariate regression models showed that α diversity indices and bacterial and endotoxin loads were positively associated with the occupants' age, number of occupants, cleaning frequency, presence of dogs, and age of the house. Further studies are needed to understand how meteorological factors influence the indoor bacterial community in light of climate change.

Bacterial Flora on Mist Outlet Surfaces in 4D Theaters and Suspended Particle Concentration Characteristics during 4D Movie Screenings

In this study, we measured suspended particle concentrations during the screening of 4D movies (3 screens and 15 movies) and 2D movies (9 screens and 9 movies) in 3 movie theaters to obtain a more detailed understanding of the situation of suspended particle concentrations and adherent bacterial flora in 4D movie theaters, which have been introduced in increasing numbers in recent years. The adherent bacterial flora on the floor and mist outlet surfaces in the 4D movie theaters were collected and analyzed. During the movie showings, the concentrations of suspended particles in 4D movie theaters were significantly higher than those in 2D movie theaters (p < 0.001). A significant increase in suspended particle concentrations due to 4D movie effects was also observed. The results of the α-diversity and β-diversity analyses indicate that the bacterial flora on the surfaces of mist outlets in 4D movie theaters are similar. Moreover, there are many closely related species, and the bacterial flora are rich and contain rare bacterial species. Many of the bacterial genera that are dominant in 4D theaters are suited to aqueous environments, and bacteria in the water supply system may have an impact on the indoor environment.

Associations between environmental characteristics, high-resolution indoor microbiome, metabolome and allergic and non-allergic rhinitis symptoms for junior high school students

Rhinitis is one of the most prevalent chronic diseases globally. Microbiome exposure affects the occurrence of rhinitis. However, previous studies did not differentiate allergic rhinitis (AR) and non-allergic rhinitis (NAR) in the microbial association analysis. In this study, we investigate 347 students in 8 junior high schools, Terengganu, Malaysia, who were categorized as healthy (70.9%), AR (13.8%) and NAR (15.3%) based on a self-administered questionnaire and skin prick tests of pollen, pet, mould and house dust mite allergens. Classroom microbial and metabolite exposure in vacuumed dust was characterized by PacBio long-read amplicon sequencing, quantitative PCR and LC-MS-based untargeted metabolomics. Our findings indicate a similar microbial association pattern between AR and NAR. The richness in Gammaproteobacteria was negatively associated with AR and NAR symptoms, whereas total fungal richness was positively associated with AR and NAR symptoms (p < 0.05). Brasilonema bromeliae and Aeromonas enteropelogenes were negatively associated with AR and NAR, and Deinococcus was positively associated with AR and NAR (p < 0.01). Pipecolic acid was protectively associated with AR and NAR symptoms (OR = 0.06 and 0.13, p = 0.009 and 0.045). A neural network analysis showed that B. bromeliae was co-occurring with pipecolic acid, suggesting that the protective role of this species may be mediated by releasing pipecolic acid. Indoor relative humidity and the weight of vacuum dust were associated with AR and NAR, respectively (p < 0.05), but the health effects were mediated by two protective bacterial species, Aliinostoc morphoplasticum and Ilumatobacter fluminis. Overall, our study reported a similar microbial association pattern between AR and NAR and also revealed the complex interactions between microbial species, environmental characteristics, and rhinitis symptoms.

From Raising Awareness to a Behavioural Change: A Case Study of Indoor Air Quality Improvement Using IoT and COM-B Model

The topic of indoor air pollution has yet to receive the same level of attention as ambient pollution. We spend considerable time indoors, and poorer indoor air quality affects most of us, particularly people with respiratory and other health conditions. There is a pressing need for methodological case studies focusing on informing households about the causes and harms of indoor air pollution and supporting changes in behaviour around different indoor activities that cause it. The use of indoor air quality (IAQ) sensor data to support behaviour change is the focus of our research in this paper. We have conducted two studies-first, to evaluate the effectiveness of the IAQ data visualisation as a trigger for the natural reflection capability of human beings to raise awareness. This study was performed without the scaffolding of a formal behaviour change model. In the second study, we showcase how a behaviour psychology model, COM-B (Capability, Opportunity, and Motivation-Behaviour), can be operationalised as a means of digital intervention to support behaviour change. We have developed four digital interventions manifested through a digital platform. We have demonstrated that it is possible to change behaviour concerning indoor activities using the COM-B model. We have also observed a measurable change in indoor air quality. In addition, qualitative analysis has shown that the awareness level among occupants has improved due to our approach of utilising IoT sensor data with COM-B-based digital interventions.

Bioaerosols in an industrial park and the adjacent houses: Dispersal between indoor/outdoor, the impact of air purifier, and health risk reduction

Inhaling airborne pathogens may cause severe epidemics showing huge threats to indoor dwellings residents. The ventilation, environmental parameters, and human activities would affect the abundance and pathogenicity of bioaerosols in indoor. However, people know little about the indoor airborne microbes especially pathogens near the industrial park polluted with organics and heavy metals. Herein, the indoor bioaerosols' community composition, source and influencing factors near an electronic waste (e-waste) industrial park were investigated. Results showed that the average bioaerosol level in the morning was lower than evening. Bioaerosol concentration and activity in indoor (1936 CFU/m³ and 7.62 × 10⁵ ng/m³ sodium fluorescein in average) were lower than the industrial park (4043 CFU/m³ and 7.77 × 10⁵ ng/m³ sodium fluorescein), and higher microbial viability may be caused by other pollutants generated during e-waste dismantling process. Fluorescent biological aerosol particles occupied 17.6%-23.7% of total particles, indicating that most particles were non-biological. Bacterial communities were richer and more diverse than fungi. Furthermore, Bacillus and Cladosporium were the dominant indoor pathogens, and pathogenic fungi were more influenced by environmental factors than bacteria. SourceTracker analysis indicates that outdoor was the main source of indoor bioaerosols. The hazard quotient (<1) of airborne microbes through inhalation was negligible, but long-term exposure to pathogens could be harmful. Air purifiers could effectively remove the airborne fungi and spheroid bacteria than cylindrical bacteria, but open doors and windows would reduce the purification efficiency. This study is great important for risk assessments and control of indoor bioaerosols near industrial park.

Assessment of a novel continuous cleaning device using metatranscriptomics in diverse hospital environments

Introduction

Despite routine implementation of cleaning and disinfection practices in clinical healthcare settings, high-touch environmental surfaces and contaminated equipment often serve as reservoirs for the transmission of pathogens associated with healthcare-associated infections (HAIs).

Methods

The current study involved the analysis of high-touch surface swabs using a metatranscriptomic sequencing workflow (CSI-Dx™) to assess the efficacy of cleanSURFACES® technology in decreasing microbial burden by limiting re-contamination. This is a non-human single center study conducted in the Emergency Department (ED) and on an inpatient Oncology Ward of Walter Reed National Military Medical Center that have followed hygienic practices during the COVID-19 pandemic environment.

Results

Although there was no difference in observed microbial richness (two-tailed Wilcoxon test with Holm correction, P > 0.05), beta diversity findings identified shifts in microbial community structure between surfaces from baseline and post-intervention timepoints (Day 1, Day 7, Day 14, and Day 28). Biomarker and regression analyses identified significant reductions in annotated transcripts for various clinically relevant microorganisms' post-intervention, coagulase-negative staphylococci and Malassezia restricta, at ED and Oncology ward, respectively. Additionally, post-intervention samples predominantly consisted of Proteobacteria and to a lesser extent skin commensals and endogenous environmental microorganisms in both departments.

Discussion

Findings support the value of cleanSURFACES®, when coupled with routine disinfection practices, to effectively impact on the composition of active microbial communities found on high-touch surfaces in two different patient care areas of the hospital (one outpatient and one inpatient) with unique demands and patient-centered practices.

Evaluation of an Air Cleaning Device Equipped with Filtration and UV: Comparison of Removal Efficiency on Particulate Matter and Viable Airborne Bacteria in the Inlet and Treated Air

Since the COVID-19 pandemic, improving indoor air quality (IAQ) has become vital for the public as COVID-19 and other infectious diseases can transmit via inhalable aerosols. Air cleaning devices with filtration and targeted pollutant treatment capabilities can help improve IAQ. However, only a few filtration/UV devices have been formally tested for their effectiveness, and little data is publicly available and UV doses comparable. In this research, we upgraded a particulate matter (PM) air filtration prototype by adding UV-C (germicidal) light. We developed realistic UV dose metrics for fast-moving air and selected performance scenarios to quantify the mitigation effect on viable airborne bacteria and PM. The targeted PM included total suspended particulate (TSP) and a coarse-to-fine range sized at PM₁₀, PM₄, PM_2.5, and PM₁. The PM and viable airborne bacteria concentrations were compared between the inlet and outlet of the prototype at 0.5 and 1.0 m³/s (low and high) air flow modes. The upgraded prototype inactivated nearly 100% of viable airborne bacteria and removed up to 97% of TSP, 91% of PM₁₀, 87% of PM₄, 87% of PM_2.5, and 88% of PM₁. The performance in the low flow rate mode was generally better than in the high flow rate mode. The combination of filtration and UV-C treatment provided 'double-barrier' assurance for air purification and lowered the risk of spreading infectious micro-organisms.

Bacterial Communities in Various Parts of Air-Conditioning Units in 17 Japanese Houses

HVAC systems have a significant impact on the indoor environment, and microbial contamination in HVAC systems has a significant effect on the indoor air quality. In this study, to gain a better understanding of the microbial contamination inside ACs, we used NGS to analyze the 16S rRNA gene of bacteria adhering to AC filters, cooling coils, fans, and air outlet surfaces. The five phyla in terms of the highest relative abundance were Proteobacteria, Firmicutes, Actinobacteria, Cyanobacteria, and Bacteroidetes. The surface of an AC filter provides a history of indoor airborne bacterial contamination, and of the 10 bacterial genera we detected with the highest abundance (in the following order: Pseudomonas > Staphylococcus > Paracoccus > Corynebacterium > Acinetobacter > Streptococcus > Methylobacterium > Enhydrobacter > Sphingomonas > Actinotignum) on the filter surface, the top 6 genera were Gram-negative bacteria. Furthermore, the seventh-most abundant genus adhering to the filter surface (Methylobacterium) was the second-most abundant genus on the cooling coil and fan, and the ninth-most abundant genus on the air filter (Sphingomonas) was the third-most abundant genus on the cooling coil. Various factors impact the bacterial flora inside AC units, including the location of the house, AC unit usage, and occupant activity.

cleanSURFACES® intervention reduces microbial activity on surfaces in a senior care facility

As one of the top public health challenges outlined by the Centers for Disease Control (CDC), estimates report that hospital acquired infections (HAIs) claim the lives of 99,000 Americans and cost healthcare providers over $28 billion each year. In addition to underlying conditions related to age, elderly patients in long-term care facilities are at an elevated risk of acquiring HAIs. A large percentage of HAIs is attributable to contaminated surfaces and medical devices. To that end, this study utilized a metatranscriptomic sequencing workflow (CSI-Dx™) to profile active microbial communities from surfaces in the HJ Heinz Community Living Center, a long-term care facility in the Veterans Affairs Pittsburgh Health Care System. Swabs were collected from high-touch surfaces (Keyboard, Ledge, Workstation on Wheels, Worksurfaces) before (Baseline) and after cleanSURFACES^® were installed at 4 timepoints (Day 1, Day 7, Day 14, and Day 30). Microbial richness was significantly reduced after cleanSURFACES^® intervention (Wilcoxon test with Holm correction, p=0.000179). Beta diversity results revealed distinct clustering between Baseline and Post-intervention samples (Adonis, p<0.001). Reduction in bacterial (Staphylococcus aureus, Staphylococcus epidermidis, Staphylococcus hominis) and fungal (Malassezia restricta, Candida albicans, Candida glabrata, and Candida orthopsilosis) expression of opportunistic pathogens was observed. Additionally, a subset of taxa (Corynebacterium, Cutibacterium acnes, and Ralstonia pickettii) was present in specific Post-intervention timepoints and surface types. This study revealed decreased microbial activity, highlighting the potential for the combinatorial application of cleanSURFACES^® and regular decontamination practices to reduce the prevalence of microbes causing HAIs.

Microbiome analysis: An emerging forensic investigative tool

Microbial diversity's potential has been investigated in medical and therapeutic studies throughout the last few decades. However, its usage in forensics is increasing due to its effectiveness in circumstances when traditional approaches fail to provide a decisive opinion or are insufficient in forming a concrete opinion. The application of human microbiome may serve in detecting the type of stains of saliva and vaginal fluid, as well as in attributing the stains to the individual. Similarly, the microbiome makeup of a soil sample may be utilised to establish geographic origin or to associate humans, animals, or things with a specific area, additionally microorganisms influence the decay process which may be used in depicting the Time Since death. Further in detecting the traces of the amount and concentration of alcohol, narcotics, and other forensically relevant compounds in human body or visceral tissues as they also affect the microbial community within human body. Beside these, there is much more scope of microbiomes to be explored in terms of forensic investigation, this review focuses on multidimensional approaches to human microbiomes from a forensic standpoint, implying the potential of microbiomes as an emerging tool for forensic investigations such as individual variability via skin microbiomes, reconstructing crime scene, and linking evidence to individual.

Indoor microbiome and allergic diseases: From theoretical advances to prevention strategies

The prevalence of allergic diseases, such as asthma, rhinitis, eczema, and sick building syndrome (SBS), has increased drastically in the past few decades. Current medications can only relieve the symptoms but not cure these diseases whose development is suggested to be greatly impacted by the indoor microbiome. However, no study comprehensively summarizes the progress and general rules in the field, impeding subsequent translational application. To close knowledge gaps between theoretical research and practical application, we conducted a comprehensive literature review to summarize the epidemiological, environmental, and molecular evidence of indoor microbiome studies. Epidemiological evidence shows that the potential protective indoor microorganisms for asthma are mainly from the phyla Actinobacteria and Proteobacteria, and the risk microorganisms are mainly from Bacilli, Clostridia, and Bacteroidia. Due to extremely high microbial diversity and geographic variation, different health-associated species/genera are detected in different regions. Compared with indoor microbial composition, indoor metabolites show more consistent associations with health, including microbial volatile organic compounds (MVOCs), lipopolysaccharides (LPS), indole derivatives, and flavonoids. Therefore, indoor metabolites could be a better indicator than indoor microbial taxa for environmental assessments and health outcome prediction. The interaction between the indoor microbiome and environmental characteristics (surrounding greenness, relative humidity, building confinement, and CO2 concentration) and immunology effects of indoor microorganisms (inflammatory cytokines and pattern recognition receptors) are briefly reviewed to provide new insights for disease prevention and treatment. Widely used tools in indoor microbiome studies are introduced to facilitate standard practice and the precise identification of health-related targets.

Modification of polyester filters with synthesized copper nanoparticles for use as biocide in a real environment

Antimicrobial air filtration techniques have recently been widely studied to enhance indoor air quality and mitigate hazardous airborne microorganisms. Here, CuNPs were incorporated into a commercial polyester fiber surface and Scanning Mobility Particle Sizer was used to measure the adherence between fibers and nanoparticles. An acid pretreatment previous CuNP incorporation was effective against the particle release and enhanced the adhesion between particle and fiber. CuNP was a mixture of Cu⁰ and Cu₂O with a diameter size of 90 nm (SEM micrographs). The permeability of the filter was low, in order of 10^–9 m². The activity against pathogens was tested in loco in a real environment using a filtration prototype apparatus. It was observed that the presence of CuNP mitigated the fungi and bacteria growth not only on the surface but also reduced microbe concentrations after passing through the filter. These results show that CuNP can be used as an inhibitor of various microorganisms, making them a good alternative for indoor environments to control indoor air quality.

Microbial Tracking-2, a metagenomics analysis of bacteria and fungi onboard the International Space Station

BACKGROUND

The International Space Station (ISS) is a unique and complex built environment with the ISS surface microbiome originating from crew and cargo or from life support recirculation in an almost entirely closed system. The Microbial Tracking 1 (MT-1) project was the first ISS environmental surface study to report on the metagenome profiles without using whole-genome amplification. The study surveyed the microbial communities from eight surfaces over a 14-month period. The Microbial Tracking 2 (MT-2) project aimed to continue the work of MT-1, sampling an additional four flights from the same locations, over another 14 months.

METHODS

Eight surfaces across the ISS were sampled with sterile wipes and processed upon return to Earth. DNA extracted from the processed samples (and controls) were treated with propidium monoazide (PMA) to detect intact/viable cells or left untreated and to detect the total DNA population (free DNA/compromised cells/intact cells/viable cells). DNA extracted from PMA-treated and untreated samples were analyzed using shotgun metagenomics. Samples were cultured for bacteria and fungi to supplement the above results.

RESULTS

Staphylococcus sp. and Malassezia sp. were the most represented bacterial and fungal species, respectively, on the ISS. Overall, the ISS surface microbiome was dominated by organisms associated with the human skin. Multi-dimensional scaling and differential abundance analysis showed significant temporal changes in the microbial population but no spatial differences. The ISS antimicrobial resistance gene profiles were however more stable over time, with no differences over the 5-year span of the MT-1 and MT-2 studies. Twenty-nine antimicrobial resistance genes were detected across all samples, with macrolide/lincosamide/streptogramin resistance being the most widespread. Metagenomic assembled genomes were reconstructed from the dataset, resulting in 82 MAGs. Functional assessment of the collective MAGs showed a propensity for amino acid utilization over carbohydrate metabolism. Co-occurrence analyses showed strong associations between bacterial and fungal genera. Culture analysis showed the microbial load to be on average 3.0 × 10⁵ cfu/m² CONCLUSIONS: Utilizing various metagenomics analyses and culture methods, we provided a comprehensive analysis of the ISS surface microbiome, showing microbial burden, bacterial and fungal species prevalence, changes in the microbiome, and resistome over time and space, as well as the functional capabilities and microbial interactions of this unique built microbiome. Data from this study may help to inform policies for future space missions to ensure an ISS surface microbiome that promotes astronaut health and spacecraft integrity. Video Abstract.

The sanitary indoor environment-a potential source for intact human-associated anaerobes

A healthy human microbiome relies on the interaction with and exchange of microbes that takes place between the human body and its environment. People in high-income countries spend most of their time indoors and for this reason, the built environment (BE) might represent a potent source of commensal microbes. Anaerobic microbes are of particular interest, as researchers have not yet sufficiently clarified how the human microbiome acquires oxygen-sensitive microbes. We sampled the bathrooms in ten households and used propidium monoazide (PMA) to assess the viability of the collected prokaryotes. We compared the microbiome profiles based on 16S rRNA gene sequencing and confirmed our results by genetic and cultivation-based analyses. Quantitative and qualitative analysis revealed that most of the microbial taxa in the BE samples are human-associated. Less than 25% of the prokaryotic signatures originate from intact cells, indicating that aerobic and stress resistant taxa display an apparent survival advantage. However, we also confirmed the presence of intact, strictly anaerobic taxa on bathroom floors, including methanogenic archaea. As methanogens are regarded as highly sensitive to aerobic conditions, oxygen-tolerance experiments were performed with human-associated isolates to validate their survival. These results show that human-associated methanogens can survive oxic conditions for at least 6 h. We collected strong evidence that supports the hypothesis that obligate anaerobic taxa can survive in the BE for a limited amount of time. This suggests that the BE serves as a potential source of anaerobic human commensals.

An Assessment of Airborne Bacteria and Fungi in the Female Dormitory Environment: Level, Impact Factors and Dose Rate

In this study, the levels of airborne bacteria and fungi were tested in a female dormitory room; the effects of heating, relative humidity and number of occupants on indoor microorganisms were analyzed and the dose rate of exposure to microbes was assessed. The bacterial and fungal concentrations in the room ranged from 100 to several thousand CFU/m³, and the highest counts were observed in the morning (930 ± 1681 CFU/m³). Staphylococcus spp. and Micrococcus spp. were found in the dormitory. When the heating was on, the total bacterial and fungal counts were lower than when there was no heating. Moreover, statistically significant differences were observed for bacterial concentrations during the morning periods between the times when there was no heating and the times when there was heating. The number of occupants had an obvious positive effect on the total bacterial counts. Moreover, RH had no correlation with the airborne fungi in the dormitory, statistically. Furthermore, the highest dose rate from exposure to bacteria and fungi was observed during sleeping hours. The dose rate from exposure to airborne microorganisms in the dormitory was associated with the activity level in the room. These results helped to elucidate the threat of bioaerosols to the health of female occupants and provide guidance for protective measures.

Environmental Factors Affecting Diversity, Structure, and Temporal Variation of Airborne Fungal Communities in a Research and Teaching Building of Tianjin University, China

Airborne fungi are widely distributed in the environment and may have adverse effects on human health. A 12-month survey on the diversity and concentration of culturable airborne fungi was carried out in a research and teaching building of Tianjin University. Indoor and outdoor environments were analyzed using an HAS-100B air sampler. A total of 667 fungal strains, belonging to 160 species and 73 genera were isolated and identified based on morphological and molecular analysis. The most abundant fungal genera were Alternaria (38.57%), Cladosporium (21.49%), and Aspergillus (5.34%), while the most frequently appearing species was A. alternata (21%), followed by A. tenuissima (12.4%), and C. cladosporioides (9.3%). The concentration of fungi in different environments ranged from 0 to 150 CFU/m3 and was significantly higher outdoor than indoor. Temperature and sampling month were significant factors influencing the whole building fungal community, while relative humidity and wind speed were highly correlated with fungal composition outdoor. Variations in the relative abundance of major airborne fungal taxa at different heights above-ground could lead to different community structures at different floors. Our results may provide valuable information for air quality monitoring and microbial pollution control in university building environments.

Microbiological contamination of indoor and outdoor environments in a desert climate

Microbiological air contamination in the desert environment is becoming an essential subject for the health of office building occupants and public health. In this study, the concentrations and compositions of airborne microorganisms (bacteria and fungi) were assessed in indoor and outdoor environments using a multistory building complex in Kuwait as a case study. Airborne microorganism samples were collected from 12 sites within the building complex containing nineteen stories over four seasons. Culturable airborne bacteria and fungi were impacted on selected media to determine their concentrations and compositions with a Biolog Omnilog GEN III system and Biolog MicroStation. The indoor mean airborne bacterial count concentrations ranged from 35 to 18,463 CFU/m³, concentrations that are higher than 2,000 CFU/m³, demonstrating high-very high contamination levels in all seasons. Fungal contamination was high in winter and summer, with detected concentrations > 2,000 CFU/m³. Indoor-to-outdoor (I/O) ratios showed that airborne microbial contamination inside building floors originated from indoor air contamination. All the building floors showed bacterial and fungal concentrations ranging from less than 2,000 to more than 2,000 CFU/m³, indicative of a high to very high air contamination level. Statistical analysis showed no correlation between bacterial and fungal concentrations, demonstrating that they originated from unrelated sources. In the indoor building air, the most prevalent bacterial isolate was Bacillus pseudomycoides/cereus, whereas the most dominant fungal isolate was Aspergillus spp. The low count for indoor air bacterial species suggested no particular health risk for the occupants. In contrast, the high count of indoor air fungal species in the winter samples and the presence of potentially allergenic genera detected may suggest possible health risks for the occupants. The results obtained are the basis for the recommendation that the maintenance activities of the HVAC system and the periodical cleaning operation program be revised and preplanned as protective measures.

Abundance and diversity of antibiotic resistance genes possibly released to ambient air by experiments in biology laboratories

Antibiotic resistance genes (ARG) have been considered as a global emerging threat to public health systems. As special locations where both antibiotics and ARGs are directly used, biology laboratories are poorly studied but potential important emission sources where not only the environmental stress is strong but also obtaining resistance is much easier comparing to other well studied hot spots including farms, hospitals, wastewater treatment plants and landfills where antibiotics but not ARGs are used or discharged. Therefore, in this study, 11 Swiss biology laboratories working on different fields and located in the city center, suburb and rural area were studied to reveal the abundance and diversity of airborne ARGs in them and their surrounding areas with Colony-forming units (CFU) cultivation and quantitative Polymerase Chain Reaction (qPCR). Most biology laboratories did not discharge significant amounts or varieties of ARGs and cultivable bacteria via air. No correlation was found between the number of CFUs and the abundance of 16S rRNA, but two clusters of correlated airborne ARGs, the animal husbandry related cluster, and city and hospital related cluster were identified in this study. Although most biology laboratories may not be the emission sources of a wide variety of airborne ARGs, the ARGs in the animal husbandry related cluster which are abundant in the animal laboratories and aadA1 which is abundant in the laboratories working on other eukaryocytes need to be furtherly studied to make sure if they are potential health risks for the researchers.

Integrating the human microbiome in the forensic toolkit: Current bottlenecks and future solutions

Over the last few years, advances in massively parallel sequencing technologies (also referred to next generation sequencing) and bioinformatics analysis tools have boosted our knowledge on the human microbiome. Such insights have brought new perspectives and possibilities to apply human microbiome analysis in many areas, particularly in medicine. In the forensic field, the use of microbial DNA obtained from human materials is still in its infancy but has been suggested as a potential alternative in situations when other human (non-microbial) approaches present limitations. More specifically, DNA analysis of a wide variety of microorganisms that live in and on the human body offers promises to answer various forensically relevant questions, such as post-mortem interval estimation, individual identification, and tissue/body fluid identification, among others. However, human microbiome analysis currently faces significant challenges that need to be considered and overcome via future forensically oriented human microbiome research to provide the necessary solutions. In this perspective article, we discuss the most relevant biological, technical and data-related issues and propose future solutions that will pave the way towards the integration of human microbiome analysis in the forensic toolkit.

Footwear microclimate and its effects on the microbial community of the plantar skin

The association between the footwear microclimate and microbial community on the foot plantar skin was investigated by experiments with three participants. Novel methods were developed for measuring in-shoe temperature and humidity at five footwear regions, as well as the overall ventilation rate inside the footwear. Three types of footwear were tested including casual shoes, running shoes, and perforated shoes for pairwise comparison of footwear microclimate and corresponding microbial community on the skin. The major findings are as follows: (1) footwear types make a significant difference to in-shoe temperature at the instep region with the casual shoes sustaining the warmest of all types; (2) significant differences were observed in local internal absolute humidity between footwear types, with the casual shoes sustaining the highest level of humidity at most regions; (3) the perforated shoes provided the highest ventilation rate, followed by running and casual shoes, and the faster the gait, the larger the discrepancy in ventilation rate between footwear types; (4) the casual shoes seemed to provide the most favorable internal environment for bacterial growth at the distal plantar skin; and (5) the bacterial growth at the distal plantar skin showed a positive linear correlation with the in-shoe temperature and absolute humidity, and a negative linear correlation with the ventilation rate. The ventilation rate seemed to be a more reliable indicator of the bacterial growth. Above all, we can conclude that footwear microclimate varies in footwear types, which makes contributions to the bacterial growth on the foot plantar skin.

Origin, distribution, and perspective health benefits of particulate matter in the air of underground salt mine: a case study from Bochnia, Poland

The composition and distribution of airborne particles in different locations in a salt mine were determined in terms of their origin, the distance from the air inlet, and the adaptation of post-mining chambers and corridors for tourists and general audience. The composition of aerosols in air was also evaluated from the perspective of human health. Air samples were collected on filters by using portable air pumps, in a historical underground salt mine in Bochnia (Poland), which is currently a touristic and recreation attraction and sanatorium. The particulate matter (PM) concentration was determined using the gravimetric method by weighing quartz filters. The content of carbon, water-soluble constituents, trace elements, and minerals was also determined. A genetic classification of the suspended matter was proposed and comprised three groups: geogenic (fragments of rock salt and associated minerals from the deposit), anthropogenic (carbon-bearing particles from tourist traffic and small amounts of fly ash, soot, and rust), and biogenic particles (occasional pollen). The total PM concentration in air varied between 21 and 79 μg/m³ (with PM₄ constituting 4-24 μg/m³). The amount of atmospheric dust components coming from the surface was low and decreased with the distance from the intake shaft, thus indicating the self-cleaning process. NaCl dominated the water-soluble constituents, while Fe, Al, Ag, Mn, and Zn dominated the trace elements, with the concentration of majority of them below 30 ng/m³. These metals are released into air from both natural sources and the wear or/and corrosion of mining and tourists facilities in the underground functional space. No potentially toxic elements or constituents were detected. The presence of salt particles and salty spray in the atmosphere of salt mine, which may have anti-inflammatory and antiallergic properties, is beneficial to human health. This study will allow for a broader look at the potential of halotherapy in underground salt mines from a medical and regulatory point of view.

Colliding and interacting microbiomes and microbial communities - consequences for human health

Living 'things' coexist with microorganisms, known as the microbiota/microbiome that provides essential physiological functions to its host. Despite this reliance, the microbiome is malleable and can be altered by several factors including birth-mode, age, antibiotics, nutrition, and disease. In this minireview, we consider how other microbiomes and microbial communities impact the host microbiome and the host through the concept of microbiome collisions (initial exposures) and interactions. Interactions include changes in host microbiome composition and functionality and/or host responses. Understanding the impact of other microbiomes and microbial communities on the microbiome and host are important considering the decline in human microbiota diversity in the developed world - paralleled by the surge of non-communicable, inflammatory-based diseases. Thus, surrounding ourselves with rich and diverse beneficial microbiomes and microbial communities to collide and interact with should help to diminish the loss in microbial diversity and protect from certain diseases. In the same vein, our microbiomes not only influence our health but potentially the health of those close to us. We also consider strategies for enhanced host microbiome collisions and interactions through the surrounding environment that ensure increased microbiome diversity and functionality contributing to enhanced symbiotic return to the host in terms of health benefit.

Associations between the indoor microbiome, environmental characteristics and respiratory infections in junior high school students of Johor Bahru, Malaysia

Pathogens are commonly present in the human respiratory tract, but symptoms are varied among individuals. The interactions between pathogens, commensal microorganisms and host immune systems are important in shaping the susceptibility, development and severity of respiratory diseases. Compared to the extensive studies on the human microbiota, few studies reported the association between indoor microbiome exposure and respiratory infections. In this study, 308 students from 21 classrooms were randomly selected to survey the occurrence of respiratory infections in junior high schools of Johor Bahru, Malaysia. Vacuum dust was collected from the floor, chairs and desks of these classrooms, and high-throughput amplicon sequencing (16S rRNA and ITS) and quantitative PCR were conducted to characterize the absolute concentration of the indoor microorganisms. Fifteen bacterial genera in the classes Actinobacteria, Alphaproteobacteria, and Cyanobacteria were protectively associated with respiratory infections (p < 0.01), and these bacteria were mainly derived from the outdoor environment. Previous studies also reported that outdoor environmental bacteria were protectively associated with chronic respiratory diseases, such as asthma, but the genera identified were different between acute and chronic respiratory diseases. Four fungal genera from Ascomycota, including Devriesia, Endocarpon, Sarcinomyces and an unclassified genus from Herpotrichillaceae, were protectively associated with respiratory infections (p < 0.01). House dust mite (HDM) allergens and outdoor NO₂ concentration were associated with respiratory infections and infection-related microorganisms. A causal mediation analysis revealed that the health effects of HDM and NO₂ were partially or fully mediated by the indoor microorganisms. This is the first study to explore the association between environmental characteristics, microbiome exposure and respiratory infections in a public indoor environment, expanding our understanding of the complex interactions among these factors.

SARS-CoV-2 detection status associates with bacterial community composition in patients and the hospital environment

BACKGROUND

SARS-CoV-2 is an RNA virus responsible for the coronavirus disease 2019 (COVID-19) pandemic. Viruses exist in complex microbial environments, and recent studies have revealed both synergistic and antagonistic effects of specific bacterial taxa on viral prevalence and infectivity. We set out to test whether specific bacterial communities predict SARS-CoV-2 occurrence in a hospital setting.

METHODS

We collected 972 samples from hospitalized patients with COVID-19, their health care providers, and hospital surfaces before, during, and after admission. We screened for SARS-CoV-2 using RT-qPCR, characterized microbial communities using 16S rRNA gene amplicon sequencing, and used these bacterial profiles to classify SARS-CoV-2 RNA detection with a random forest model.

RESULTS

Sixteen percent of surfaces from COVID-19 patient rooms had detectable SARS-CoV-2 RNA, although infectivity was not assessed. The highest prevalence was in floor samples next to patient beds (39%) and directly outside their rooms (29%). Although bed rail samples more closely resembled the patient microbiome compared to floor samples, SARS-CoV-2 RNA was detected less often in bed rail samples (11%). SARS-CoV-2 positive samples had higher bacterial phylogenetic diversity in both human and surface samples and higher biomass in floor samples. 16S microbial community profiles enabled high classifier accuracy for SARS-CoV-2 status in not only nares, but also forehead, stool, and floor samples. Across these distinct microbial profiles, a single amplicon sequence variant from the genus Rothia strongly predicted SARS-CoV-2 presence across sample types, with greater prevalence in positive surface and human samples, even when compared to samples from patients in other intensive care units prior to the COVID-19 pandemic.

CONCLUSIONS

These results contextualize the vast diversity of microbial niches where SARS-CoV-2 RNA is detected and identify specific bacterial taxa that associate with the viral RNA prevalence both in the host and hospital environment. Video Abstract.

Identifying background microbiomes in an evidence recovery laboratory: A preliminary study

16S rRNA profiling of bacterial communities may have forensic utility in the identification or association of individuals involved with criminal activities. Microbial profiling of evidence may, in the future, be performed within environments currently utilised for human DNA recovery, such as a forensic biology laboratory. It would be important to establish the background microbiome of such an environment to determine the potential presence of human or environmental microbial signatures to assist forensic scientists in the appropriate interpretation of target microbial communities. This study sampled various surfaces of an Evidence Recovery Laboratory (ERL) on three occasions including (a) before a monthly deep-clean, (b) immediately following the deep-clean, and (c) immediately after the laboratory's use by a single participant for the purposes of routine item examinations. Microbial profiles were also generated for the involved participant and researcher for comparison purposes. Additionally, human nuclear DNA was profiled for each of the samples collected, using standard forensic profiling techniques, to provide a prospective link to the presence or absence of a background microbial signature within the ERL after its use. Taxonomic distributions across ERL samples revealed no consistent signature of any of the items sampled over time, however, major phyla noted within all ERL samples across the three timepoints were consistent with those found in human skin microbiomes. PCoA plots based on the Unweighted Unifrac metric revealed some clustering between participant microbial reference samples and surfaces of the ERL after use, suggesting that despite a lack of direct contact, and adherence to standard operating procedures (SOPs) suitable for human DNA recovery, microbiomes may be deposited into a forensic setting over time. The reference samples collected from the involved participant and researcher generated full STR profiles. Human DNA was observed to varying degrees in samples taken from the ERL across each of the sampling timepoints. There was no correlation observed between samples that contained or did not contain detectable quantities of human nuclear DNA and microbial profile outputs.

Categorisation of culturable bioaerosols in a fruit juice manufacturing facility

Bioaerosols are defined as aerosols that comprise particles of biological origin or activity that may affect living organisms through infectivity, allergenicity, toxicity, or through pharmacological or other processes. Interest in bioaerosol exposure has increased over the last few decades. Exposure to bioaerosols may cause three major problems in the food industry, namely: (i) contamination of food (spoilage); (ii) allergic reactions in individual consumers; or (iii) infection by means of pathogenic microorganisms present in the aerosol. The aim of this study was to characterise the culturable fraction of bioaerosols in the production environment of a fruit juice manufacturing facility and categorise isolates as harmful, innocuous or potentially beneficial to the industry, personnel and environment. Active sampling was used to collect representative samples of five areas in the facility during peak and off-peak seasons. Areas included the entrance, preparation and mixing area, between production lines, bottle dispersion and filling stations. Microbes were isolated and identified using 16S, 26S or ITS amplicon sequencing. High microbial counts and species diversity were detected in the facility. 239 bacteria, 41 yeasts and 43 moulds were isolated from the air in the production environment. Isolates were categorised into three main groups, namely 27 innocuous, 26 useful and 39 harmful bioaerosols. Harmful bioaerosols belonging to the genera Staphylococcus, Pseudomonas, Penicillium and Candida were present. Although innocuous and useful bioaerosols do not negatively influence human health their presence act as an indicator that an ideal environment exists for possible harmful bioaerosols to emerge.

Three-dimensional composite electrospun nanofibrous membrane by multi-jet electrospinning with sheath gas for high-efficiency antibiosis air filtration

Three-dimensional (3D) composite polyvinylidene fluoride (PVDF)/polyacrylonitrile (PAN) electrospun nanofibrous membranes combining both thick and thin nanofibers have been fabricated by the method of multi-jet electrospinning with sheath gas to realize high-efficiency air filtration under a low pressure drop. The thin PAN nanofibers form a dense membrane, with a strong capturing ability on the ultra-fine particles, while the thick PVDF nanofibers play a 3D supporting effect on the thin PAN nanofibers. In this case, the combination results in a fluffy membrane with higher porosity, which could achieve the airflow passing through the membrane without the air pressure drop. The effects of the composite manner of thick nanofibers and thin nanofibers are investigated, in order to optimize the air filtration performance of the 3D composite nanofibrous membrane. As a result, the maximum quality factor for air filtration could reach up to 0.398 Pa^-1. The particle-fiber interaction model was used to simulate the air filtration process as well, and the simulation results were fairly consistent with the experimental results, providing a guidance method for the optimization of composite nanofibrous membrane for high-efficiency air filtration. More interestingly, a cationic poly[2-(N,N-dimethyl amino) ethyl methacrylate] (PDMAEMA) was added in the PVDF solution to obtain a composite air filtration membrane with excellent antibiosis performance, which achieved the highest inhibition rate of approximately 90%. In short, this work provides an effective way to promote antibiosis air filtration performance by using an electrospun nanofibrous membrane, and might also effectively accelerate the biological protection application of current air filtration membranes.

Effectiveness of the Nanosilver/TiO2-Chitosan Antiviral Filter on the Removal of Viral Aerosols

Background: The precaution of airborne transmission of viruses, such as influenza, SARS, MERS, and COVID-19, is essential for reducing infection. In this study, we applied a zero-valent nanosilver/titania-chitosan (nano-Ag⁰/TiO₂-CS) filter bed, whose broad-spectrum antimicrobial efficacy has been proven previously, for the removal of viral aerosols to minimize the risk of airborne transmission. Methods: The photochemical deposition method was used to synthesize the nano-Ag⁰/TiO₂-CS antiviral material. The surface morphology, elemental composition, and microstructure of the nano-Ag⁰/TiO₂-CS were analyzed by a scanning electron microscopy/energy dispersive X-ray spectroscopy and a transmission electron microscopy, respectively. The MS2 bacteriophages were used as surrogate viral aerosols. The antiviral efficacy of nano-Ag⁰/TiO₂-CS was evaluated by the MS2 plaque reduction assay (PRA) and filtration experiments. In the filtration experiments, the MS2 aerosols passed through the nano-Ag⁰/TiO₂-CS filter, and the MS2 aerosol removal efficiency was evaluated by an optical particle counter and culture method. Results and Conclusions: In the MS2 PRA, 3 g of nano-Ag⁰/TiO₂-CS inactivated 97% of MS2 bacteriophages in 20 mL liquid culture (2 ± 0.5 × 10¹⁶ PFU/mL) within 2 hours. The removal efficiency of nano-Ag⁰/TiO₂-CS filter (thickness: 6 cm) for MS2 aerosols reached up to 93%. Over 95% of MS2 bacteriophages on the surface of the nano-Ag⁰/TiO₂-CS filter were inactivated within 20 minutes. The Wells-Riley model predicted that when the nano-Ag⁰/TiO₂-CS filter was used in the ventilation system, airborne infection probability would reduce from 99% to 34.6%. The nano-Ag⁰/TiO₂-CS filter could remain at 50% of its original antiviral efficiency after continuous operation for 1 week, indicating its feasibility for the control of the airborne transmission.

Derived habitats of indoor microbes are associated with asthma symptoms in Chinese university dormitories

Increasing evidence from the home environment indicates that indoor microbiome exposure is associated with asthma development. However, indoor microbiome composition can be highly diverse and dynamic, and thus current studies fail to produce consistent results. Chinese university dormitories are special high-density dwellings with similar building and occupants characteristics, which facilitate to disentangle the complex interactions between microbes, environmental characteristics and asthma. Settled air dust and floor dust was collected from 87 dormitory rooms in Shanxi University. Bacterial communities were characterized by 16 S rRNA amplicon sequencing. Students (n = 357) were surveyed for asthma symptoms and measured for fractional exhaled nitric oxide (FeNO). Asthma was not associated with the overall bacterial richness but associated with specific phylogenetic classes. Taxa richness and abundance in Clostridia, including Ruminococcus, Blautia, Clostridium and Subdoligranulum, were positively associated with asthma (p < 0.05), and these taxa were mainly derived from the human gut. Taxa richness in Alphaproteobacteria and Actinobacteria were marginally protectively associated with asthma, and these taxa were mainly derived from the outdoor environment. Bacterial richness and abundance were not associated with FeNO levels. Building age was associated with overall bacterial community variation in air and floor dust (p < 0.05), but not associated with the asthma-related microorganisms. Our data shows that taxa from different phylogenetic classes and derived habitats have different health effects, indicating the importance of incorporating phylogenetic and ecological concepts in revealing patterns in the microbiome asthma association analysis.