A review of the rheological properties of dilute and concentrated food emulsions

Non-Newtonian behaviour of suspensions and emulsions: Review of different mechanisms

The mechanisms of non-Newtonian behaviour of suspensions and emulsions in steady shear flow are reviewed. The review is divided into two parts. In the first part, the mechanisms of non-Newtonian behaviour in suspensions and emulsions composed of Newtonian matrix are reviewed. Both dilute and concentrated systems are discussed. In the second part, the mechanisms of non-Newtonian behaviour in suspensions and emulsions composed of non-Newtonian matrix are reviewed. Where appropriate, mathematical models describing the rheology are included.

Almond protein as Pickering emulsion stabilizer: Impact of microgel fabrication method and pH on emulsion stability

We evaluated the ability of almond proteins to produce Pickering emulsions (EM) stabilized by microgels (MG) fabricated by three different methods (heat treatment-HT, crosslinking with transglutaminase-TG or calcium-CA), at two pH levels (pH 3 or 7). Compared to pH 7, acidic pH significantly denatured almond proteins (ellipticity ∼0 mdeg), decreased absolute zeta potential values (10.5 to 18.6 mV at pH 3 and - 24.6 to -32.6 mV at pH 7), and free thiol content (114.64-131.60 μmol SH/g protein at pH 3 and 129.46-148.17 μmol SH/g protein at pH 7 - except in CA-crosslinked microgels, p > 0.05). These changes led to larger microgel sizes (D3,2pH3: 26.3-39.5 μm vs. D3,2pH7: 5.9-9.0 μm) with lower polydispersity (SpanpH3: ∼ 1.94 vs. SpanpH7: 2.32, excluding CA-based samples). Consequently, the Turbiscan Stability Index (TSI) was higher in acidic conditions for all emulsions, except for the calcium-containing formulation (EM_CApH3), emphasizing the critical role of calcium binding in maintaining emulsion stability in acidic environments. Microgels prepared via the traditional heat treatment method produced emulsions with intermediate stability (TSI ranging from 3.4 % to 5.1 % at 28 days of storage). Conversely, TG-crosslinked microgels led to unstable emulsions at pH 3, likely due to the lowest zeta potential (+4.2 mV), whereas at pH 7, the greatest stability was attributed to bridging flocculation that created a stable gel-like structure. Indeed, emulsions with lower TSI (EM_CApH3 = 1.8 %, EM_CApH7 = 2.3 % and EM_TGpH7 = 1.0 %, at 28 days of storage) also exhibited higher elastic modulus (G') over frequency sweep, indicating that the strong elastic network was relevant for emulsion stability (up to 28 days). This study, for the first time, demonstrated the production of stable almond-based Pickering emulsions, with properties modulated by the pH and method used to fabricate the microgels.

Hot-water soluble fraction of starch as particle-stabilizers of oil-in-water emulsions: Effect of dry heat modification

Dry heat treatment (DHT) ranging from 130 to 190 °C was employed to modify corn starch. The hot-water soluble fraction (HWS) of the DHT-modified starch was isolated, and its capacity and mechanism for stabilizing O/W emulsions were investigated. Corn starch underwent a significant structural transformation by DHT at 190 °C, characterized by a 7.3 % reduction in relative crystallinity, a tenfold decrease in weight-average molecular weight from 95.21 to 8.11 × 106 g/mol, and a degradation of over one-third of the extra-long chains of amylopectin (DP > 36) into short chains (DP 6-12). These structural modifications resulted in a substantial formation of soluble amylopectin, leading to a sharp increase in the HWS content of corn starch from 3.16 % to 85.06 %. This augmented HWS content surpassed the critical macromolecule concentration, prompting the formation of HWS nanoaggregates. These nanoaggregates, with an average particle size of 33 nm, functioned as particle stabilizers, ensuring the stability of the O/W emulsion through the Pickering mechanism. The O/W emulsion stabilized by HWS nanoaggregates exhibited noteworthy centrifugal and storage stability, with rheological properties remaining nearly unchanged over a storage period of 180 days. Given its straightforward preparation process, the HWS of DHT-modified starch could be a promising natural emulsifier.

Preservation of chilled beef using active films based on bacterial cellulose and polyvinyl alcohol with the incorporation of Perilla essential oil Pickering emulsion

In this study, Perilla essential oil (PEO) Pickering emulsions, prepared using soybean protein isolate-chitosan nanoparticles (SPI-CSNPs) as emulsifiers (SCEO), were used to improve the performance of bacterial cellulose/polyvinyl alcohol (BC/PVA) films for application in chilled beef preservation. The SCEO has a smaller particle size (185 nm), higher viscosity, a more uniform dispersion and was more stable at an oil phase volume fraction of 80 %. An increase in the films' surface roughness and in the hydrogen bonding between SCEO and the films' matrix was also observed, resulting in a lower tensile strength (TS, 94.75-62.02 MPa) and higher elongation at break (EAB, 26.78-55.62 %). Moreover, the thermal stability, water vapor permeability, antioxidant and antibacterial properties of the composite films improved as the SCEO content increased. Furthermore, the Pickering emulsion method was effective in preventing the loss of PEO during storage. Overall, one particular composite film, BP/SCEO3, could prolong the shelf life of chilled beef by up to 14 days, and hence was promising for food preservation.

Development and evaluation of eco-friendly carvacrol nanoemulsion as a sustainable biopesticide against bacterial leaf blight of cluster bean

BACKGROUND

The study of carvacrol plant antibacterial components has recently become a hot topic in modern farming. Carvacrol industrial applications are restricted by their physicochemical instability and partial solubility in water. In the present study, an ultrasonic emulsification method was used to prepare a carvacrol nanoemulsion (CAR-NE) employing nonionic surfactants. The CAR-NE was characterized using a dynamic light scattering (DLS) instrument and transmission electron microscopy (TEM). The goal of this work was nanoencapsulation of carvacrol to improve its aqueous solubility and preservation of the encapsulated compound against climatic conditions. Another aim of the present study was the evaluation of the growth-promoting effects and antibacterial potential of CAR-NE against bacterial leaf blight of cluster bean.

RESULTS

CAR-NE showed a hydrodynamic diameter, ZP and PDI index of 43.88 ± 4.30 nm, -47.8 ± 0.23 mV and 0.246 ± 0.04, respectively. The spherical shape morphology of CAR-NE was confirmed by TEM imaging. Minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) of the CAR-NE were 20 and 160 μL mL-1 (respectively) against Xanthomonas axonopodis pv. cyamopsidis. Additionally, the antibacterial potential of CAR-NE was evaluated for controlling bacterial blight of cluster bean in fields. The disease severity in the negative control plants (water) was 84%, but that in the CAR-NE 160 (μL mL-1 ) was remarkably low at 14%, nearly the same as the positive control (streptomycin sulfate).

CONCLUSION

The shelf-life of CAR-NE was 2 months at room temperature without any appreciable changes in hydrodynamic diameter and zeta potential. Consequently, plants treated with CAR-NE 160 showed substantial improvement in plant growth. © 2023 Society of Chemical Industry.

Rheological study of nanoemulsions with repulsive and attractive interdroplet interactions

Nanoemulsions have adjustable transparency, tunable rheology, high stability, and low sensitivity to changes in pH and temperature, which make them interesting for applications such as low-fat and low-calorie foods. In this research, we study model concentrated nanoemulsions which are stabilized by sodium dodecyl sulfate (SDS). To prepare samples in different structural states, semi-dilute nanoemulsions are prepared at 25% droplet volume fraction (φ), after which evaporating the continuous phase at room temperature leads to concentrated nanoemulsions up to 60% volume fraction. Surfactant concentration is also tuned to induce different interdroplet interactions so that concentrated nanoemulsions in repulsive glass, attractive glass, and gel states are achieved. Rheological properties of nanoemulsions with different structural states are comprehensively studied over a volume fraction range. Utilizing the existing predictive models for (nano)emulsion rheology reveals a more satisfactory prediction for repulsive systems than systems with attractive interactions. In addition, a master curve is constructed for storage and loss moduli of nanoemulsions with different interdroplet interactions. The present work offers control over physicochemical properties of nanoemulsions for design of new food products with enhanced quality and functionality.

Nanocellulose from Cocoa Shell in Pickering Emulsions of Cocoa Butter in Water: Effect of Isolation and Concentration on Its Stability and Rheological Properties

There is a growing interest in developing new strategies to completely or partially replace cocoa butter in food and cosmetic products due to its cost and health effects. One of these alternatives is to develop stable emulsions of cocoa butter in water. However, incorporating cocoa butter is challenging as it solidifies and forms crystals, destabilizing the emulsion through arrested coalescence. Prevention against this destabilization mechanism is significantly lower than against coalescence. In this research, the rheological properties of nanocellulose from cocoa shell, a by-product of the chocolate industry, were controlled through isolation treatments to produce nanocellulose with a higher degree of polymerization (DP) and a stronger three-dimensional network. This nanocellulose was used at concentrations of 0.7 and 1.0 wt %, to develop cocoa butter in-water Pickering emulsion using a high shear mixing technique. The emulsions remained stable for more than 15 days. Nanocellulose was characterized using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), hot water and organic extractives, atomic force microscopy (AFM), degree of polymerization (DP), and rheological analysis. Subsequently, the emulsions were characterized on days 1 and 15 after their preparation through photographs to assess their physical stability. Fluorescent and electronic microscopy, as well as rheological analysis, were used to understand the physical properties of emulsions.

Rheology of liquid foods under shear flow conditions: Recently used models

Proper modeling of flow or viscosity curves as a function of shear rate is a useful tool in any engineering activity. The rheology of foods depends on the composition, processing to which they have been subjected and the state of dispersion in which they are found. Liquid foods are complex biosystems, that show non-Newtonian behavior under flow conditions. This review presents models used in recent decades to describe the experimental rheological behavior of various liquid foods, ranging from Newtonian fluids to the most complex. Some non-Newtonian parameters such as those of the Ostwald-de Waele, Bingham, Herschel-Bulkley, Casson, Cross, and Carreau models are summarized. Examples of thixotropic behavior described by the Weltman and Abu-Jdayil models are also presented. In each model, explanations based on the composition and dispersion state of the food are made. This is useful in innovative processing technologies and for scientists new to the field of food rheology. An attempt is made to exemplify and group the expected behavior for most fluid foods, including some for a dysphagia diet, depending on their composition or the dispersed system formed, which will be useful for professionals who wish to compare reported rheological parameters with those obtained experimentally.

Recent Developments in the Viscosity Modeling of Concentrated Monodisperse Emulsions

Emulsions form a large group of food materials. Many foods are either partly or wholly emulsions or are in the form of emulsion at some stage of the production process. A good understanding of the rheological properties of emulsions, especially their shear viscosity, is essential in the design, formulation, and processing of food emulsions. The texture and mouthfeel of food emulsions are also largely influenced by emulsion viscosity. Therefore, it is of practical importance to be able to correlate and predict emulsion viscosity as a function of droplet concentration and other relevant variables. In this article, the recent developments made in the viscosity modeling of concentrated emulsions are reviewed. The viscosity models for concentrated emulsions published in the twenty-first century are discussed, compared, and evaluated using a large body of experimental viscosity data available on emulsions. The effects of droplet size distribution and capillary number on the viscosity of concentrated emulsions are also discussed in detail. A new generalized viscosity model is developed for concentrated emulsions that includes the effect of capillary number and is accurate with small average percent relative error (within 3%).

Effect of Oat β-Glucan on the Structure and Properties of Soybean Protein Isolate During Maillard Reaction

Maillard reaction (MR) with oat β-glucan changed the structure of soybean protein isolate (SPI), further leading to the enhancement of its functional properties. SPI was unfolded by MR, and the SPI conjugates with high molecular weight were identified. The water solubility of SPI was improved by cross-linking with hydrophilic β-glucan, while the hydrophobicity also increased along with the unfolding of the SPI. Cross-linking with β-glucan elevated the viscosity of SPI, thus enhancing viscosity-related physiological activities, including bile acid binding ability, fat binding capacity, and hypoglycemic activity, and the functional properties increased as the βG content involved in MR increased.

Physical and Oxidative Water-in-Oil Emulsion Stability by the Addition of Liposomes from Shrimp Waste Oil with Antioxidant and Anti-Inflammatory Properties

Liposomes made of partially purified phospholipids (PL) from Argentine red shrimp waste oil were loaded with two antioxidant lipid co-extracts (hexane-soluble, Hx and acetone-soluble, Ac) to provide a higher content of omega-3 fatty acids. The physical properties of the liposomes were characterized by Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS) and Differential Scanning Calorimetry (DSC). The antioxidant and anti-inflammatory activity of the lipid extracts and liposomal suspensions were evaluated in terms of Superoxide and ABTS radical scavenging capacities and TNF-α inhibition. Uni-lamellar spherical liposomes (z-average ≈ 145 nm) with strong negative ζ potential (≈ -67 mV) were obtained in all cases. The high content of neutral lipids in the Hx extract caused structural changes in the bilayer membrane and decreased entrapment efficiency regarding astaxanthin and EPA + DHA contents. The liposomes loaded with the Hx/Ac extracts showed higher antioxidant and anti-inflammatory activity compared with empty liposomes. The liposomal dispersions improved the physical and oxidative stability of water-in-oil emulsions as compared with the PL extract, inducing pronounced close packing of water droplets. The liposomes decreased hydroperoxide formation in freshly made emulsions and prevented thio-barbituric acid-reactive substances (TBARS) accumulation during chilled storage. Liposomes from shrimp waste could be valuable nanocarriers and stabilizers in functional food emulsions.

Effect of humectants and Zygosaccharomyces bailii inoculation on the physical stability of oil-in-water emulsions modeling salad dressings

BACKGROUND

Salad dressing formulations include a pH within 3.2-4.1, salt and other solutes to depress water activity. The interaction between hydrocolloids and other components such as humectants determines their physical and microbiological stability. To our knowledge, the effect of commonly used solutes on physical stability and rheological characteristics of oil-in-water emulsions stabilized by xanthan gum has not been reported, and neither has the effect of a spoilage yeast on physical stability been evaluated.

RESULTS

The effect of different humectants (sodium chloride, glucose and xylitol) and Zygosaccharomyces bailii inoculation on the stability of oil-in-water emulsions containing different levels of xanthan gum to emulate different types of salad dressings was investigated by means of droplet size, zeta potential, rheological measurements and confocal laser scanning microscopy (CLSM). Generally, the addition of humectants strengthened the weak or strong emulsion structure, especially xylitol. Glucose or xylitol acted as stabilizers since they decreased Sauter and De Broucker diameter. On the contrary, NaCl destabilized the emulsions since it increased droplet size and exhibited the lowest absolute values of zeta potential. Inoculation with Z. bailii destabilized some emulsions since it increased Sauter and De Broucker diameter. Emulsion droplet size, polydispersity, and xanthan gum and yeast location were confirmed by CLSM imaging.

CONCLUSION

This study highlights the key role of humectants and xanthan gum level on physical characteristics and stability of oil-in-water emulsions. Addition of xylitol leads to an enhancement in emulsion rheology and physical stability, suggesting that it is a potential low-calorie multifunctional additive for salad dressings. © 2022 Society of Chemical Industry.

Influence of Type and Concentration of Biopolymer on β-Carotene Encapsulation Efficiency in Nanoemulsions Based on Linseed Oil

Many lipophilic active substances, such as β-carotene, are sensitive to chemical oxidation. A strategy to protect these ingredients is encapsulation using nanoemulsions. This work analyzes the relationship between the physical stability and encapsulation efficiency of nanoemulsions based on linseed oil. The role of two different polysaccharides, Advanced Performance xanthan gum (APXG) or guar gum (GG) as stabilizers at different concentrations were studied to reach the required physical stability of these systems. This was investigated by means of droplet size distributions, steady-state flow curves, small amplitude oscillatory shear tests, multiple light scattering, and electronic microscopy. The overall results obtained reveal a depletion flocculation mechanism in all the APXG nanoemulsions, regardless of the concentration, and above 0.3 wt.% for GG nanoemulsions. Moreover, it has been demonstrated that enhanced physical stability is directly related to higher values of encapsulation efficiency. Thus, the nanoemulsion formulated with 0.2 wt.% GG, which presented the lowest creaming degree conditioned by depletion flocculation, showed a relative β-carotene concentration even above 80% at 21 days of aging time. In conclusion, the adequate selection of polysaccharide type and its concentration is a key point for the application of stable nanoemulsions as vehicles for active ingredients.

Recent progress in fish oil-based emulsions by various food-grade stabilizers: Fabrication strategy, interfacial stability mechanism and potential application

Fish oil, rich in a variety of long-chain ω-3 PUFAs, is widely used in fortified foods due to its broad-spectrum health benefits. However, its undesired characteristics include oxidation sensitivity, poor water solubility, and fishy off-flavor greatly hinder its exploitation in food field. Over the past two decades, constructing fish oil emulsions to encapsulate ω-3 PUFAs for improving their physicochemical and functional properties has undergone great progress. This review mainly focuses on understanding the fabrication strategies, stabilization mechanism, and potential applications of fish oil emulsions, including fish oil microemulsions, nanoemulsions, double emulsions, Pickering emulsions and emulsion gels. Furthermore, the role of oil-water interfacial stabilizers in the fish oil emulsions stability will be discussed with a highlight on food-grade single emulsifiers and natural complex systems for achieving this purpose. Additionally, its roles and applications in food industry and nutrition field are delineated. Finally, possible innovative food trends and applications are highlighted, such as novel fish oil-based delivery systems construction (e.g., Janus emulsions and nutraceutical co-delivery systems), exploring digestion and absorption mechanisms and enhancing functional evaluation (e.g., nutritional supplement enhancer, and novel fortified/functional foods). This review provides a reference for the application of fish oil-based emulsion systems in future precision diet intervention implementations.

Fibrous and Spherical Aggregates of Ovotransferrin as Stabilizers for Oleogel-Based Pickering Emulsions: Preparation, Characteristics and Curcumin Delivery

This study aimed to explore the effects and mechanisms of differently shaped aggregates of ovotransferrin (OVT) particles on oleogel-based Pickering emulsions (OPEs). Medium-chain triglyceride oil-based oleogels were constructed using beeswax, and their gel-sol melting temperatures were investigated. Atomic force microscopy confirmed that both OVT fibrils and OVT spheres were successfully prepared, and the three-phase contact angle measurements indicated that fibrous and spherical aggregates of OVT particles possessed great potential to stabilize the OPEs. Afterward, the oil-in-water OPEs were fabricated using oleogel as the oil phase and OVT fibrils/spheres as the emulsifiers. The results revealed that OPEs stabilized with OVT fibrils (FIB-OPEs) presented a higher degree of emulsification, smaller droplet size, better physical stability and stronger apparent viscosity compared with OPEs stabilized with OVT spheres (SPH-OPEs). The freeze–thaw stability test showed that the FIB-OPEs remained stable after three freeze–thaw cycles, while the SPH-OPEs could barely withstand one freeze–thaw cycle. An in vitro digestion study suggested that OVT fibrils conferred distinctly higher lipolysis (46.0%) and bioaccessibility (62.8%) of curcumin to OPEs.

Increasing the Hydrophobic Component of Poloxamers and the Inclusion of Salt Extend the Release of Bupivacaine from Injectable In Situ Gels, While Common Polymer Additives Have Little Effect

Various strategies have been applied to reduce the initial burst of drug release and sustain release from poloxamer-based thermoresponsive gels. This work focussed on investigating different formulation approaches to minimise the initial burst of release and sustain the release of the small hydrophilic drug bupivacaine hydrochloride from poloxamer-based thermoresponsive gels. Various in situ gel formulations were prepared by varying the polypropylene oxide (PPO)/polyethylene oxide (PEO) ratio and by adding additives previously described in the literature. It was observed that increasing the PPO/PEO ratio from 0.28 to 0.30 reduced the initial burst release from 17.3% ± 1.8 to 9.1% ± 1.2 during the first six hours and extended the release profile from 10 to 14 days. Notably, the inclusion of sodium chloride (NaCl 0.4% w/w) further reduced the initial burst release to 1.8% ± 1.1 over the first 6 h. Meanwhile, physical blending with additive polymers had a negligible effect on the burst release and overall release profile. The findings suggest that extended release of bupivacaine hydrochloride, with reduced initial burst release, can be achieved simply by increasing the PPO/PEO ratio and the inclusion of NaCl.

Pickering Emulsions: A Novel Tool for Cosmetic Formulators

The manufacturing of stable emulsion is a very important challenge for the cosmetic industry, which has motivated intense research activity for replacing conventional molecular stabilizers with colloidal particles. These allow minimizing the hazards and risks associated with the use of conventional molecular stabilizers, providing enhanced stability to the obtained dispersions. Therefore, particle-stabilized emulsions (Pickering emulsions) present many advantages with respect to conventional ones, and hence, their commercialization may open new avenues for cosmetic formulators. This makes further efforts to optimize the fabrication procedures of Pickering emulsions, as well as the development of their applicability in the fabrication of different cosmetic formulations, necessary. This review tries to provide an updated perspective that can help the cosmetic industry in the exploitation of Pickering emulsions as a tool for designing new cosmetic products, especially creams for topical applications.

Effect of agave fructans on xanthan rheology: Impact on sodium caseinate emulsion properties

The influence of agave fructans (AF) (1-10%) and xanthan (from 0.03% to 0.25%) in combination with sodium caseinate (SC) at 1% on the rheological and physicochemical properties of aqueous phases and emulsions was evaluated. Steady-state flow behavior, particle size distribution, and stability studies were used to characterize the systems. The aqueous systems displayed the shear-thinning behavior characteristic of xanthan solutions; however, this behavior was modified by the presence of SC and AF due to interactions between AF-SC and AF-xanthan based on predominant hydrogen bonding because of the hydroxyl groups on AF. In emulsions, an increase in viscosity due to the effect of the AF concentration reflects a probable association of fructan aggregates on the surface of SC particles that reinforce the interfacial layer of SC, while xanthan contributes to an increase in the viscosity of the continuous phase, which effectively prevents coalescence and floc formation even at higher concentrations, despite the possible existence of a depletion flocculation effect attenuated by the interaction between AF-SC and AF-xanthan. PRACTICAL APPLICATION: These results can be of use, in an important way, in the design of stable functional emulsions in which there is an application for agave fructans recognized as dietary fiber, also considering their peculiar way of interacting with xanthan favoring its stabilizing functionality.

Comparative Study of Physicochemical Properties of Nanoemulsions Fabricated with Natural and Synthetic Surfactants

This work aims to evaluate the effect of two natural (whey protein isolate, WPI, and soy lecithin) and a synthetic (Tween 20) emulsifier on physicochemical properties and physical stability of food grade nanoemulsions. Emulsions stabilized by these three surfactants and different sunflower oil contents (30% and 50% w/w), as the dispersed phase, were fabricated at two levels of homogenization pressure (500 and 1000 bar). Nanoemulsions were characterized for droplet size distribution, Zeta-potential, rheological properties, and physical stability. Dynamic light scattering showed that droplet size distributions and D50 values were strongly affected by the surfactant used and the oil content. WPI gave similar droplet diameters to Tween 20 and soy lecithin gave the larger diameters. The rheology of emulsions presented a Newtonian behavior, except for WPI-stabilized emulsions at 50% of oil, presenting a shear-thinning behavior. The physical stability of the emulsions depended on the surfactant used, with increasing order of stability as follows: soy lecithin < Tween 20 < WPI. From our results, we conclude that WPI is an effective natural replacement of synthetic surfactant (Tween 20) for the fabrication of food-grade nanoemulsions.

Whey Proteins as a Potential Co-Surfactant with Aesculus hippocastanum L. as a Stabilizer in Nanoemulsions Derived from Hempseed Oil

The use of natural surfactants including plant extracts, plant hydrocolloids and proteins in nanoemulsion systems has received commercial interest due to demonstrated safety of use and potential health benefits of plant products. In this study, a whey protein isolate (WPI) from a byproduct of cheese production was used to stabilize a nanoemulsion formulation that contained hempseed oil and the Aesculus hippocastanum L. extract (AHE). A Box-Behnken experimental design was used to set the formulation criteria and the optimal nanoemulsion conditions, used subsequently in follow-up experiments that measured specifically emulsion droplet size distribution, stability tests and visual quality. Regression analysis showed that the concentration of HSO and the interaction between HSO and the WPI were the most significant factors affecting the emulsion polydispersity index and droplet size (nm) (p < 0.05). Rheological tests, Fourier transform infrared spectroscopy (FTIR) analysis and L*a*b* color parameters were also taken to characterize the physicochemical properties of the emulsions. Emulsion systems with a higher concentration of the AHE had a potential metabolic activity up to 84% in a microbiological assay. It can be concluded from our results that the nanoemulsion system described herein is a safe and stable formulation with potential biological activity and health benefits that complement its use in the food industry.

Alginate-Assisted Lemongrass (Cymbopogon nardus) Essential Oil Dispersions for Antifungal Activity

The use of natural compounds as food preservatives is becoming increasingly popular as it is perceived positively by consumers. Among these substances, essential oils have attracted great interest owing to their antioxidant and antimicrobial properties. However, several challenges impair the use of essential oils in food products, such as their degradation or loss during food processing and storage, the strong aroma, even at low concentrations, which may negatively affect the sensory characteristics of food. In this context, the development of nanoformulations able to stabilize essential oils may represent a smart solution to this issue. The aim of the study was to evaluate the efficiency of alginate-based nanoformulations enriched with lemongrass (Cymbopogon nardus) essential oil (LEO) and Tween 80 against several fungi namely Penicillium expansus, Aspergillus niger and Rhizopus spp. Firstly, the flow behavior of systems at different concentrations of alginate (1%, 2% and 3% w/w) were studied. Then, emulsion-based nanoformulations at different concentrations of lemongrass essential oil in the range of 0-2% w/w were stabilized by a fixed amount of Tween 80, characterized and tested for their antifungal activity. Our results showed that the best nanoformulation able to inhibit Rhizopus spp., Penicillium expansum and Aspergillus niger, for at least 10 days, was constituted by 1% alginate/1.5% LEO/1% Tween 80. Hence, the incorporation of essential oil into nanoformulation systems may represent a valid alternative to overcome the disadvantages that limit the commercial application of essential oils.

Water Behavior of Emulsions Stabilized by Modified Potato Starch

Starch is a widely known and used emulsion stabilizer. In order to improve its properties, various types of modifications are made that change its ability to emulsify and stabilize. This paper describes the analysis of the molecular dynamics of water using low-field nuclear magnetic resonance (LF NMR) in oil-in-water emulsions obtained with the use of physically or chemically modified potato starch. The analysis of changes in spin-spin and spin-lattice relaxation times depending on the temperature allowed the activation energy value of water molecules in the analyzed emulsions to be determined. It has been shown that the presence of starch influences the values of spin-lattice T₁ and spin-spin T₂ relaxation times, both in the water and the oil phase, and the observed changes largely depended on the type of starch modification. Both types of analyzed starches also differently influenced the energy of activation of rotational movements of water molecules. On the basis of the analyses carried out with the use of LF NMR, it can be concluded that physically modified starch acts not only as a stabilizer, but also as an emulsifier, while acetylated starch does not exhibit good emulsifying properties.

Development of a High Internal Phase Emulsion of Antarctic Krill Oil Diluted by Soybean Oil Using Casein as a Co-Emulsifier

Antarctic krill oil (AKO) with 5–30% (w/w) dilution by soybean oil was co-emulsified by phospholipids (PLs) naturally present in AKO and 2% (w/w) casein in the aqueous phase to prepare high internal phase emulsions (HIPEs). The results showed that raising the AKO level resulted in concave-up changes in the mean size of oil droplets which became more densely packed. Confocal laser scanning microscopy (CLSM) and cryo-scanning electron microscopy (cryo-SEM) micrographs revealed that PLs at higher concentrations expelled more casein particles from the oil droplet surface, which facilitated the formation of a crosslinked network structure of HIPEs, leading to reduced mobility of water molecules, extended physical stability, and somewhat solid-like behavior. The rheological analysis showed at lower levels of AKO promoted fluidity of emulsions, while at higher levels it increased elasticity. Lastly, increasing the AKO level slowed down the oxidation of HIPEs. These findings provide useful insights for developing HIPEs of highly viscous AKO and its application in foods.

A Multiscale Approach to the Design and Manipulation of Oil-in-Water Emulsion-Based Products

Advances in computational technology and high-throughput modeling software have given rise to the tailored design of products that require accurate mathematical relationships for their assessment. Industrial emulsion-based products, ubiquitous to everyday life, are complex systems driven by interfacial phenomena that require quick property-prediction tools for their commercialization. In this work, by means of a multiscale approach, mathematical relationships to model oil-in-water emulsions and that can be applied to any commercial emulsion-based product are proposed. The energy consumption during the emulsification process ( $E_v$ , which transitions from monotonic increase to exponential growth at 80%  $w/w$ ), a parameter responsible for finished product performance, was linked to final product properties at three different levels: (i) molecular, through the dynamics of the interdroplet interactions given their distribution and structure at a microscopic level; (ii) microscopic, through average droplet size yielding an inversely proportional exponential relationship ( $D_{\left[\mathrm{4,3}\right]}\propto E_v^{-4}$ ); and (iii) macroscopic, through the plateau value of the elastic modulus and the flow behavior index leading to inversely proportional quadratic relationships ( $G^{\prime }\propto E_v^{-2}$ and $\eta \propto E_v^{-2}$ , respectively). These relationships are valid at dispersed phase concentrations beyond the 60%  $w/w$ threshold where the packing of the droplets changes the emulsion’s microscopic structure giving rise to Van der Waals forces-driven phenomena. Finding this threshold allowed expanding the concentration ranges of previously reported models. The main expectation is that these results will aid researchers and process/product designers to optimize their work in different industrial applications.

Aesculus hippocastanum L. as a Stabilizer in Hemp Seed Oil Nanoemulsions for Potential Biomedical and Food Applications

Nanoemulsion systems receive a significant amount of interest nowadays due to their promising potential in biomedicine and food technology. Using a two-step process, we produced a series of nanoemulsion systems with different concentrations of hemp seed oil (HSO) stabilized with Aesculus hippocastanum L. extract (AHE). Water and commercially-available low-concentrated hyaluronic acid (HA) were used as the liquid phase. Stability tests, including an emulsifying index (EI), and droplet size distribution tests performed by dynamic light scattering (DLS) proved the beneficial impact of AHE on the emulsion’s stability. After 7 days of storage, the EI for the water-based system was found to be around 100%, unlike the HA systems. The highest stability was achieved by an emulsion containing 5% HSO and 2 g/L AHE in water, as well as the HA solution. In order to obtain the detailed characteristics of the emulsions, UV-Vis and FTIR spectra were recorded, and the viscosity of the samples was determined. Finally, a visible microscopic analysis was used for the homogeneity evaluation of the samples, and was compared with the DLS results of the water system emulsion, which showed a desirable stability. The presented results demonstrate the possible use of oil emulsions based on a plant extract rich in saponins, such as AHE. Furthermore, it was found that the anti-inflammatory properties of AHE provide opportunities for the development of new emulsion formulations with health benefits.

Interdroplet Interactions and Rheology of Concentrated Nanoemulsions for Templating Porous Polymers

In the current study, we investigate the colloidal behavior of nanoemulsions over a wide range of oil volume fractions (φ) from dilute to concentrated regime. The dilute system contains 25% silicone oil dispersed in the aqueous phase consisting of poly(ethylene glycol)-diacrylate (PEGDA) and sodium dodecyl sulfate (SDS), which is concentrated through evaporation of water at two different rates at ambient temperature. The rheological studies show that the liquid-like nanoemulsions transform into viscoelastic gels at a volume fraction of ∼30%. The plateau storage modulus of the nanoemulsions increases in the semidilute systems (φ below 45%) and then decreases steadily with increasing φ up to 60%. Dependency of the modulus on the evaporation rate can be observed in the rheological results. According to the rheological results and the overall pairwise interactions estimated between droplets, we propose two regimes of colloidal interactions. In the semidilute regime, the attractive gelation occurs due to considerable short-range attractive depletion induced by the PEGDA oligomer and SDS micelles. In the concentrated regime, the gel weakens by increasing φ mainly due to the structural stabilization barrier from a high concentration of micelles. The PEGDA in the continuous phase of the nanoemulsions can be crosslinked through photopolymerization, resulting in nanoporous PEGDA hydrogels upon removal of oil droplets. We study the water uptake of the nanoporous hydrogels prepared from the nanoemulsion templates at φ = 60%. The hydrogel obtained from the nanoemulsion with fast evaporation rate shows higher water uptake than that obtained from the slowly concentrated nanoemulsion. The tunable viscoelastic behavior of concentrated nanoemulsions as well as the resulting nanoporous hydrogels offers a new platform to design the soft materials for a wide range of applications.