ShF5H1 overexpression increases syringyl lignin and improves saccharification in sugarcane leaves

The agricultural sugarcane residues, bagasse and straws, can be used for second-generation ethanol (2GE) production by the cellulose conversion into glucose (saccharification). However, the lignin content negatively impacts the saccharification process. This polymer is mainly composed of guaiacyl (G), hydroxyphenyl (H), and syringyl (S) units, the latter formed in the ferulate 5-hydroxylase (F5H) branch of the lignin biosynthesis pathway. We have generated transgenic lines overexpressing ShF5H1 under the control of the C4H (cinnamate 4-hydroxylase) rice promoter, which led to a significant increase of up to 160% in the S/G ratio and 63% in the saccharification efficiency in leaves. Nevertheless, the content of lignin was unchanged in this organ. In culms, neither the S/G ratio nor sucrose accumulation was altered, suggesting that ShF5H1 overexpression would not affect first-generation ethanol production. Interestingly, the bagasse showed a significantly higher fiber content. Our results indicate that the tissue-specific manipulation of the biosynthetic branch leading to S unit formation is industrially advantageous and has established a foundation for further studies aiming at refining lignin modifications. Thus, the ShF5H1 overexpression in sugarcane emerges as an efficient strategy to improve 2GE production from straw.

Catalytic depolymerization of Camellia oleifera shell lignin to phenolic monomers: Insights into the effects of solvent, catalyst and atmosphere

Camellia oleifera shell (COS) is a renewable biomass resource abundant in lignin with significant potential for producing phenolic monomers. However, the dearth of research has led to considerable resource wastage and environmental pollution. Herein, reductive catalytic fractionation (RCF) of COS was performed using noble metal catalysts in different solvents. An 11.1 wt% yield of phenolic monomers was achieved with 91% selectivity toward propylene-substituted monomers in H2O/EtOH (3:7, v/v) cosolvent under N2 atmosphere. Notably, the highest phenolic monomer yield of 17.0 wt% was obtained with impressive selectivity (86.9%) toward propanol-substituted monomers in the presence of H2. The GPC analysis and 2D HSQC NMR spectra indicated the effective depolymerization of lignin oligomers with catalysts. Phenolic monomers with ethyl, propyl, or propanol side chain could be produced from lignin-derived oligomers through hydrogenolysis, hydrogenation, and decarboxylation reactions. Overall, this study has paved the way for the valorization of COS lignin through the RCF strategy.

High-performance removal of methylene blue dye using porous lignin extracted from sugarcane bagasse by deep eutectic solvent

This study evaluated the ability of triethyl benzyl ammonium chloride/lactic acid deep eutectic solvent extracted lignin (TEBAC/LA-DES-L) to adsorb methylene blue (MB) without additional functional group modification. The structure and morphology of TEBAC/LA-DES-L were characterized using SEM, BET, FT-IR, and TGA techniques. Various factors influencing MB adsorption, such as extraction temperature, solution pH, adsorbent dose, initial MB concentration, adsorption time, and reaction temperature, were investigated. The Redlich-Peterson isotherm displayed a good fit for the experimental data, with a maximum adsorption capacity of 85.16 mg/g. Kinetic analysis suggested that the adsorption process followed the pseudo-second-order model, with adsorption occurring in <100 min on DES-L-4 h. The mechanism of MB adsorption on DES-L-4 h was attributed to electrostatic attraction, hydrophobic interactions, and hydrogen bonding forces. Overall, DES-L-4 h demonstrated high adsorption capacity and rapid adsorption rate, making it a promising adsorbent for effectively removing cationic dyes from wastewater.

Lignin hydrogel sensor with anti-dehydration, anti-freezing, and reproducible adhesion prepared based on the room-temperature induction of zinc chloride-lignin redox system

In recent years, flexible sensors constructed mainly from hydrogels have received increasing attention. However, conventional hydrogels need to be prepared by high-temperature or radiation-induced polymerization reactions, which limits their practical applications due to their suboptimal electrical conductivity and weak mechanical properties. In this paper, using sodium lignosulfonate as the raw material, a dynamic catechol-quinone redox system formed by lignin‑zinc ions was constructed to initiate rapid free radical polymerization of acrylamide (AM) monomer at room temperature. In addition, Deep eutectic solvent (DES) can form a strong hydrogen bonding network within the molecules and between the molecules of the hydrogel, resulting in a hydrogel with good tensile properties (hydrogel elongation at break of 727.19 %, breaking strength of 84.09 kPa), and provides the hydrogel with high electrical conductivity, anti-dehydration, anti-freezing, and anti-bacterial properties. Meanwhile, the addition of lignin also improved the adhesion and UV resistance of the hydrogel. This hydrogel assembled into a flexible sensor can sense various small and large amplitude movements such as nodding, smiling, frowning, etc., and has a wide range of applications in flexible sensors.

Structural changes and grading mechanism of lignin during solid alkali-active oxygen extraction and grading

Cooking with active oxygen and solid alkali (CAOSA) is an efficient pretreatment method for biomass. For better grading of the lignin yellow liquor, the different lignin fractions and the recovered solid alkali were obtained using a simultaneous acid-alkali graded separation method. The results indicated that the recovery rate of solid alkali was 67.25 %, and the grading of lignin components was characterized by smaller dispersion coefficients, and more stable properties and structure. Lignin fractions with low dispersion coefficients possess more key structures, including the Phenol hydroxyl group (ArOH), Methoxy (OMe), and β-aryl ether (β-O-4), and have better thermal properties. The low molecular weight L4 has the highest ArOH content (2.1 mmol/g), which provides better antioxidant properties. The CAOSA process destroyed the S-unit and prevented lignin from condensation. Furthermore, the CAOSA process protected carbohydrates, which could effectively prevent them from dehydrating and re-polymerizing into pseudo-lignin. This allowed the pulp to remain natural, which was beneficial for subsequent transformation and utilization. Overall, the efficient separation of biomass components and lignin grading method proposed by combining the CAOSA process with the acid-alkali grading separation method has a strong application prospect and provides a theoretical basis for the high-value utilization of biomass and lignin.

Lignin hydrogenolysis: Tuning the reaction by lignin chemistry

Replacing fossil resource with biomass is one of the promising approaches to reduce our carbon footprint. Lignin is one of the three major components of lignocellulosic biomass, accounting for 10-35 wt% of dried weight of the biomass. Hydrogenolytic depolymerization of lignin is attracting increasing attention because of its capacity of utilizing lignin in its uncondensed form and compatibility with the biomass fractionation processes. Lignin is a natural aromatic polymer composed of a variety of monolignols associated with a series of lignin linkage motifs. Hydrogenolysis cleaves various ether bonds in lignin and releases phenolic monomers which can be further upgraded into valuable products, i.e., drugs, terephthalic acid, phenol. This review provides an overview of the state-of-the-art advances of the reagent (lignin), products (hydrol lignin), mass balance, and mechanism of the lignin hydrogenolysis reaction. The chemical structure of lignin is reviewed associated with the free radical coupling of monolignols and the chemical reactions of lignin upon isolation processes. The reactions of lignin linkages upon hydrogenolysis are discussed. The components of hydrol lignin and the selectivity production of phenolic monomers are reviewed. Future challenges on hydrogenolysis of lignin are proposed. This article provides an overview of lignin hydrogenolysis reaction which shows light on the generation of optimized lignin ready for hydrogenolytic depolymerization.

Study on Thermally Induced Lignin Aggregation Kinetics for the Preparation of Uniformly Sized Lignin Nanoparticles in Water

Lignin nanoparticles (LNPs) present a potential avenue for the high-value utilization of lignin. However, the simple and ecofriendly method of thermally induced self-assembly for the preparation of LNPs has been overlooked due to a lack of sufficient understanding of the lignin aggregation mechanism. Therefore, this study focuses on the kinetics of thermally induced lignin aggregation. It was found that lignin aggregates formed at lower temperatures exhibit poor stability and are more prone to continuous growth through coalescence. This apparent contradiction with the conventional understanding of thermoresponsive polymers could be attributed to changes in the viscoelasticity of the lignin aggregates during phase separation. Based on this finding, we worked out strategies to optimize the preparation of LNPs in water through thermally induced self-assembly. Pure LNPs with well-defined interfaces and a minimum polydispersity index (PDI) of 0.12 were obtained by increasing the temperature to 125-150 °C. Furthermore, combined with noncovalent modification, LNPs with a PDI of 0.08 would even be formed at 80 °C. Notably, the resulting pure LNPs show potential for application in photonic crystal products that require excellent monodispersity. This study provides a new approach for the environmentally friendly preparation of LNPs with a controllable morphology.

Benign and Selective Amination of Lignins towards Aromatic Biobased Building Blocks with Primary Amines

Lignin is a widely available second-generation biopolymer and the main potential source of renewable aromatic building blocks. Lignin-based polyamines offer great potential in applications based on chemical and materials sciences. However, common aminations techniques for lignin usually involve toxic chemicals and generate hindered and low reactivity amines. In this study, we developed two new, simple, and benign 2-step methodologies for the elaboration of lignin-based polyamines from different technical lignins (kraft, soda and organosolv) with a selectivity towards reactive primary amines. These methods involve grafting amide groups onto lignin followed by a hydrolysis step. Non-toxic heterocyclic compounds N-acetyl-2-oxazolidinone and 2-methyl-2-oxazoline were used as amidation agents. Hydrolysis was performed in acetone-water mixtures. Reactions were studied on model compounds and optimized on lignins. Aminated lignins were fully characterized and primary amines were quantified using quantitative 19F NMR. Our methods generated aminated lignins with low apparent molar masses and high solubility in water and solvents. Nitrogen contents of the products ranged between 2.0 and 3.5 mmol/g with reactive primary amines counts up to 1.7 mmol/g. These soluble and reactive lignin-based polyamines offer great potential as a replacement for fossil-based polyamines in e.g., the synthesis of aromatic polymer materials or as potential chelating, antibacterial agents.

Valorization of Lignocellulose with One-Step Acidified Monophasic Phenoxyethanol Fractionation

Effective fractionation of lignocelluosic biomass and subsequent valorization of all three major components under mild conditions were achieved. Pretreatment with acidified monophasic phenoxyethanol (EPH) efficiently removed 92.6 % lignin and 80 % xylan from poplar at 110 °C in 60 min, yielding high-value EPH-xyloside, EPH-modified lignin (EPHL), and a solid residue nearly purely composed of carbohydrates. After removing the grafted acetyl groups using 1 % NaOH at 50 °C, the highest enzymatic digestibility reached 92.3 %. EPHL could be recovered in high yield and purity with an uncondensed structure, while xylose was converted to EPH-xyloside, a potential precursor in biomedical industries. Additionally, the acidified monophasic EPH solvent could effectively fractionate biomass from species other than hardwood, achieving over 70 % delignification from recalcitrant pinewood under the same mild conditions, demonstrating the high potential of monophasic EPH pretreatment.

Excellent facile fabrication of PVA and lignin nanoparticles from wheat straw after novel DES-THF pretreatment

The utilization of environmental friendly and renewable materials has received increasing attention recently. Lignin nanospheres (LNPs) prepared from recovered lignin and residual lignin after DESs and DESs-THF pretreatment were obtained by self-assembly in the present research. Then, films were prepared by incorporating them into polyvinyl alcohol (PVA) solution. The properties of various films were characterized and compared. Results showed that as the LNPs content increased, the UV blocking capacity of the films was gradually enhanced than PVA film. The DES-THF films showed better antioxidant properties up to 69 % due to higher phenolic hydroxyl content. The hydrophobicity of films incorporated with DESs-THF pretreated lignin was consistently better than that of DES pretreated. DES-THF-M films showed a higher Tmax than that of DES-M films, resulting in better thermal stability. Moreover, DES-THF-L films are lighter in color due to a lower degree of condensation, which is favorable to subsequent applications. The incorporation of LNPs improved mechanical and antioxidant properties, thermal stability, and UV shielding ability of PVA films, especially lignin after DES-THF pretreatment. In conclusion, the prepared PVA/LNPs composite films possessed good functional properties that make them potential for packaging materials.

Light-Driven Formate-Salts-Induced Cleavage of Oxidized Lignin Model Compounds

We report a light-induced cleavage of oxidized lignin model compounds utilizing formate salts. For compounds containing an aliphatic hydroxyl (γ-OH) group, the employment of a hydrogen atom transfer (HAT) catalyst was crucial to preserving the efficacy of the fragmentation reaction. Furthermore, we successfully converted a trimeric oxidized model compound into the desired products with moderate yields.

Increased hydrophilicity of lignin-derivable vs. bisphenol-based polysulfones for potential water filtration applications

The functionality inherent in lignin-derivable aromatics (e.g., polar methoxy groups) can provide a potential opportunity to improve the hydrophilicity of polysulfones (PSfs) without the need for the additional processing steps and harsh reagents/conditions that are typically used in conventional PSf modifications. As determined herein, lignin-derivable PSfs without any post-polymerization modification exhibited higher hydrophilicity than comparable petroleum-based PSfs (commercial/laboratory-synthesized) and also demonstrated similar hydrophilicity to functionalized BPA-PSfs reported in the literature. Importantly, the lignin-derivable PSfs displayed improved thermal properties relative to functionalized BPA-PSfs in the literature, and the thermal properties of these bio-derivable PSfs were close to those of common non-functionalized PSfs. In particular, the glass transition temperature (T g) and degradation temperature of 5% weight loss (T d5%) of lignin-derivable PSfs (T g ∼165-170 °C, T d5% ∼400-425 °C) were significantly higher than those of typical functionalized BPA-PSfs in the literature (T g ∼110-160 °C, T d5% ∼240-260 °C) and close to those of unmodified, commercial/laboratory-synthesized BPA-/bisphenol F-PSfs (T g ∼180-185 °C, T d5% ∼420-510 °C).

Effects of Acid Dissociation and Ionic Solutions on the Aggregation of 2-Pyrone-4,6-dicarboxylic Acid

The conversion of lignin can produce biomass-derived aromatic compounds such as 2-pyrone-4,6-dicarboxylic acid (PDC), which is a potential sustainable precursor of bioplastics. PDC is a pseudoaromatic dicarboxylic acid that can aggregate in aqueous solution. Aggregation depends upon PDC-PDC, PDC-water, and PDC-ion interactions that are representative of interactions in similar charged, aromatic compounds. These interactions both dictate PDC aggregation and the likelihood that PDC aggregates exhibit parallel stacking configurations that may promote PDC crystallization, which can be leveraged to separate PDC from solution. However, the interplay of interactions that drive aggregation and structure formation, and how these depend upon the charge of PDC and ionic species present in solution, remains unclear. In this work, we investigate PDC aggregation in diverse ionic solutions using all-atom molecular dynamics simulations and molecular clustering analysis. We consider ion-induced dipole interactions by using a modified Lennard-Jones nonbonded model for divalent ions in solutions. From molecular clustering analysis, we derive characteristic parameters to quantify aggregate sizes and parallel stacking configurations. We show that acid dissociation facilitates PDC aggregation in ionic solutions via ion-mediated interactions, and different ionic solutions influence both the likelihood of aggregation and the formation of parallel aggregates. In particular, we find that parallel stacking is primarily found in solutions with monovalent ions, whereas divalent ions promote larger, but less structured, aggregates. These results provide molecular-scale insight into the effects of specific ions on the aggregation of like-charged PDC molecules to inform understanding of related separation processes.

Enzymatic production of xylooligosaccharide from lignocellulosic and marine biomass: A review of current progress, challenges, and its applications in food sectors

Over the last decade, xylooligosaccharides (XOS) have attracted great attentions because of their unique chemical properties and excellent prebiotic effects. Among the current strategies for XOS production, enzymatic hydrolysis is preferred due to its green and safe process, simplicity in equipment, and high control of the degrees of polymerization. This paper comprehensively summarizes various lignocellulosic biomass and marine biomass employed in enzymatic production of XOS. The importance and advantages of enzyme immobilization in XOS production are also discussed. Many novel immobilization techniques for xylanase are presented. In addition, bioinformatics techniques for the mining and designing of new xylanase are also described. Moreover, XOS has exhibited great potential applications in the food industry as diverse roles, such as a sugar replacer, a fat replacer, and cryoprotectant. This review systematically summarizes the current research progress on the applications of XOS in food sectors, including beverages, bakery products, dairy products, meat products, aquatic products, food packaging film, wall materials, and others. It is anticipated that this paper will act as a reference for the further development and application of XOS in food sectors and other fields.

Lignin Nanoparticles: Transforming Environmental Remediation

In the face of escalating environmental challenges driven by human activities, the quest for innovative solutions to counter pollution, contamination, and ecological degradation has gained paramount importance. Traditional approaches to environmental remediation often fall short in addressing the complexity and scale of modern-day environmental problems. As industries transition towards sustainable paradigms, the exploration of novel materials and technologies becomes crucial. Lignin nanoparticles have emerged as a promising avenue of exploration in this context. Once considered a mere byproduct, lignin's unique properties and versatile functional groups have propelled it to the forefront of environmental remediation research. This review paper delves into the resurgence of lignin from an environmental perspective, examining its pivotal role in carbon cycling and its potential to address various environmental challenges. The paper extensively discusses the synthesis, properties, and applications of lignin nanoparticles in diverse fields such as water purification and soil remediation. Moreover, it highlights the challenges associated with nanoparticle deployment, ranging from Eco toxicological assessments to scalability issues. Multidisciplinary collaboration and integration of research findings with real-world applications are emphasized as critical factors for unlocking the transformative potential of lignin nanoparticles. Ultimately, this review underscores lignin nanoparticles as beacons of hope in the pursuit of cleaner, healthier, and more harmonious coexistence between humanity and nature through innovative environmental remediation strategies.

Enhancing the thermostability of lignin peroxidase: Heme as a keystone cofactor driving stability changes in heme enzymes

Heme-containing enzymes, critical across life's domains and promising for industrial use, face stability challenges. Despite the demand for robust industrial biocatalysts, the mechanisms underlying the thermal stability of heme enzymes remain poorly understood. Addressing this, our research utilizes a 'keystone cofactor heme-interaction approach' to enhance ligand binding and improve the stability of lignin peroxidase (LiP). We engineered mutants of the white-rot fungus PcLiP (Phanerochaete chrysosporium) to increase thermal stability by 8.66 °C and extend half-life by 29 times without losing catalytic efficiency at 60 °C, where typically, wild-type enzymes degrade. Molecular dynamics simulations reveal that an interlocked cofactor moiety contributes to enhanced structural stability in LiP variants. Additionally, a stability index developed from these simulations accurately predicts stabilizing mutations in other PcLiP isozymes. Using milled wood lignin, these mutants achieved triple the conversion yields at 40 °C compared to the wild type, offering insights for more sustainable white biotechnology through improved enzyme stability.

Stimulus-responsive drug delivery nanoplatforms for inflammatory bowel disease therapy

Inflammatory bowel disease (IBD) manifests as inflammation in the colon, rectum, and ileum, presenting a global health concern with increasing prevalence. Therefore, effective anti-inflammatory therapy stands as a promising strategy for the prevention and management of IBD. However, conventional nano drug delivery systems (NDDSs) for IBD face many challenges in targeting the intestine, such as physiological and pathological barriers, genetic variants, disease severity, and nutritional status, which often result in nonspecific tissue distribution and uncontrolled drug release. To address these limitations, stimulus-responsive NDDSs have received considerable attention in recent years due to their advantages in providing controlled release and enhanced targeting. This review provides an overview of the pathophysiological mechanisms underlying IBD and summarizes recent advancements in microenvironmental stimulus-responsive nanocarriers for IBD therapy. These carriers utilize physicochemical stimuli such as pH, reactive oxygen species, enzymes, and redox substances to deliver drugs for IBD treatment. Additionally, pivotal challenges in the future development and clinical translation of stimulus-responsive NDDSs are emphasized. By offering insights into the development and optimization of stimulus-responsive drug delivery nanoplatforms, this review aims to facilitate their application in treating IBD. STATEMENT OF SIGNIFICANCE: This review highlights recent advancements in stimulus-responsive nano drug delivery systems (NDDSs) for the treatment of inflammatory bowel disease (IBD). These innovative nanoplatforms respond to specific environmental triggers, such as pH reactive oxygen species, enzymes, and redox substances, to release drugs directly at the inflammation site. By summarizing the latest research, our work underscores the potential of these technologies to improve drug targeting and efficacy, offering new directions for IBD therapy. This review is significant as it provides a comprehensive overview for researchers and clinicians, facilitating the development of more effective treatments for IBD and other chronic inflammatory diseases.

Multimetal synergy in an iron-cobalt-nickel hydroxide electrocatalyst for electro-oxidative lignin depolymerization to produce value-added aromatic chemicals

A ternary iron-cobalt-nickel hydroxide nanoarray catalyst was fabricated, which achieves enhanced performance towards electro-oxidative depolymerization of lignin models to produce benzoic acid and phenol.

Depolymerization of Native Lignin over Thiol Capped Ultrathin ZnIn2S4 Microbelts Mediated by Photogenerated Thiyl Radical

The valorization of native lignin to functionalized aromatic compounds under visible light is appealing yet challenging. In this communication, colloidal mercaptoalkanoic acid capped ultrathin ZnIn2S4 (ZIS) microbelts was successfully fabricated, which was used as a superior catalyst for depolymerization of native lignin in birch woodmeal under visible light, with an optimum yield of 28.8 wt % to functionalized aromatic monomers achieved in 8 h. The capped mercaptoalkanoic acid not only enables a solvent modulated reversible interchange of ZIS between the colloidal state for efficient reaction and the aggregated state for facile separation, but also serves as a precursor for light initiated generation of reactive thiyl radical for highly selective cleavage of β-O-4 bond in native lignin. This work provides a green and efficient strategy for the depolymerization of native lignin to functionalized aromatic monomers under mild conditions, which involves a new mechanism for the cleavage of β-O-4 bonds in native lignin. The capability of cleavage of β-O-4 bonds in native lignin by photogenerated thiyl radicals also demonstrates the great potential of using photogenerated thiyl radicals in organics transformations.

Selective Cleavage of Cβ-O-4 Bond for Lignin Depolymerization via Paired-Electrolysis in an Undivided Cell

The cleavage of C-O bonds is one of the most promising strategies for lignin-to-chemicals conversion, which has attracted considerable attention in recent years. However, current catalytic system capable of selectively breaking C-O bonds in lignin often requires a precious metal catalyst and/or harsh conditions such as high-pressure H2 and elevated temperatures. Herein, we report a novel protocol of paired electrolysis to effectively cleave the Cβ-O-4 bond of lignin model compounds and real lignin at room temperature and ambient pressure. For the first time, "cathodic hydrogenolysis of Cβ-O-4 linkage" and "anodic C-H/N-H cross-coupling reaction" are paired in an undivided cell, thus the cleavage of C-O bonds and the synthesis of valuable triarylamine derivatives could be simultaneously achieved in an energy-effective manner. This protocol features mild reaction conditions, high atom economy, remarkable yield with excellent chemoselectivity, and feasibility for large-scale synthesis. Mechanistic studies indicate that indirect H* (chemical absorbed hydrogen) reduction instead of direct electron transfer might be the pathway for the cathodic hydrogenolysis of Cβ-O-4 linkage.

Membrane vesicles can contribute to cellulose degradation by Teredinibacter turnerae, a cultivable intracellular endosymbiont of shipworms

Teredinibacter turnerae is a cultivable cellulolytic Gammaproteobacterium (Cellvibrionaceae) that commonly occurs as an intracellular endosymbiont in the gills of wood-eating bivalves of the family Teredinidae (shipworms). The genome of T. turnerae encodes a broad range of enzymes that deconstruct cellulose, hemicellulose, and pectin and contribute to wood (lignocellulose) digestion in the shipworm gut. However, the mechanisms by which T. turnerae secretes lignocellulolytic enzymes are incompletely understood. Here, we show that T. turnerae cultures grown on carboxymethyl cellulose (CMC) produce membrane vesicles (MVs) that include a variety of proteins identified by LC-MS/MS as carbohydrate-active enzymes (CAZymes) with predicted activities against cellulose, hemicellulose, and pectin. Reducing sugar assays and zymography confirm that these MVs exhibit cellulolytic activity, as evidenced by the hydrolysis of CMC. Additionally, these MVs were enriched with TonB-dependent receptors, which are essential to carbohydrate and iron acquisition by free-living bacteria. These observations indicate a potential role for MVs in lignocellulose utilization by T. turnerae in the free-living state, suggest possible mechanisms for host-symbiont interaction, and may be informative for commercial applications such as enzyme production and lignocellulosic biomass conversion.

Lignin-induced rapid polymerization of asymmetrical adhesion Janus gel for strain sensor

Functional hydrogel sensors have shown explosive growth in the health and medical fields. However, the uniform adhesion and the complicated polymerization process of hydrogels seriously hinder their further development. Herein, inspired by the layered structure of human skin, we prepare a Janus gel using in-situ polymerization. Based on the lignin-Fe3+ dual catalytic system, the rapid polymerization of the gel was achieved at room temperature. By tailoring the mass ratio of lignin and Fe3+ in the precursor, the adhesion of the upper and bottom layers can be easily adjusted. In addition, hydrophobic association is introduced into the upper layer to improve the gel's mechanical properties. The obtained asymmetric bilayer gel has a significant difference in adhesion (7 times), and exhibits excellent mechanical properties in the elongation at break (1437 %) and the breaking strength (463.2 kPa). Moreover, the bilayer gel also has good freezing and UV resistance. We use the bilayer gel as a wearable strain sensor, which shows a wide strain detection range of 0-800 % (maximum gauge factor = 5.3). The proposed simple strategy avoids UV irradiation and heating processes, which provides a new idea for the rapid polymerization of multifunctional Janus hydrogels with adjustable performances.

Mechanistic insights and applications of lignin-based ultraviolet shielding composites: A comprehensive review

Lignin is a green aromatic polymer constructed from repeating phenylpropane units, incorporating features such as phenolic hydroxyl groups, carbonyl groups, and conjugated double bonds that serve as chromophores. These structural attributes enable it to absorb a wide spectrum of ultraviolet radiation within the 250-400 nm range. The resulting properties make lignin a material of considerable interest for its potential applications in polymers, packaging, architectural decoration, and beyond. By examining the structure of lignin, this research delves into the structural influence on its UV-shielding capabilities. Through a comparative analysis of lignin's use in various UV-shielding applications, the study explores the interplay between lignin's structure and its interactions with other materials. This investigation aims to elucidate the UV-shielding mechanism, thereby offering insights that could inform the development of high-value applications for lignin in UV-shielding composite materials.

Enzymatic approaches for diversifying bioproducts from cellulosic biomass

Cellulosic biomass is the most abundantly available natural carbon-based renewable resource on Earth. Its widespread availability, combined with rising awareness, evolving policies, and changing regulations supporting sustainable practices, has propelled its role as a crucial renewable feedstock to meet the escalating demand for eco-friendly and renewable materials, chemicals, and fuels. Initially, biorefinery models using cellulosic biomass had focused on single-product platform, primarily monomeric sugars for biofuel. However, since the launch of the first pioneering cellulosic plants in 2014, these models have undergone significant revisions to adapt their biomass upgrading strategy. These changes aim to diversify the bioproduct portfolio and improve the revenue streams of cellulosic biomass biorefineries. Within this area of research and development, enzyme-based technologies can play a significant role by contributing to eco-design in producing and creating innovative bioproducts. This Feature Article highlights our strategies and recent progress in utilizing the biological diversity and inherent selectivity of enzymes to develop and continuously optimize sustainable enzyme-based technologies with distinct application approaches. We have advanced technologies for standalone platforms, which produce various forms of cellulose nanomaterials engineered with customized and enhanced properties and high yields. Additionally, we have tailored technologies for integration within a biorefinery concept. This biorefinery approach prioritizes designing tailored processes to establish bionanomaterials, such as cellulose and lignin nanoparticles, and bioactive molecules as part of a new multi-bioproduct platform for cellulosic biomass biorefineries. These innovations expand the range of bioproducts that can be produced from cellulosic biomass, transcending the conventional focus on monomeric sugars for biofuel production to include biomaterials biorefinery. This shift thereby contributes to strengthening the Bioeconomy strategy and supporting the achievement of several Sustainable Development Goals (SDGs) of the 2030 Agenda for Sustainable Development.

The Influence of the Comonomer Ratio and Reaction Temperature on the Mechanical, Thermal, and Morphological Properties of Lignin Oil-Sulfur Composites

Although lignin is a plentiful biomass resource, it continually exists as an underutilized component of biomass material. Elemental sulfur is another abundant yet underutilized commodity produced as a by-product resulting from the refining of fossil fuels. The current study presents a strategy for preparing five durable composites via a simple one-pot synthesis involving the reaction of lignin oil and elemental sulfur. These lignin oil-sulfur composites LOSx@T (where x = wt. % sulfur, ranging from 80 to 90, and T represents the reaction temperature in °C) were prepared via the reaction of elemental sulfur and lignin oil (LO) with elemental sulfur. The resulting composites could be remelted and reshaped several times without the loss of mechanical strength. Mechanical, thermal, and morphological studies showed that LOSx@T possesses properties competitive with some mechanical properties of commercial building materials, exhibiting favorable compressive strengths (22.1-35.9 MPa) and flexural strengths (5.7-6.5 MPa) exceeding the values required for many construction applications of ordinary Portland cement (OPC) and brick formulations. While varying the amount of organic material did not result in a notable difference in mechanical strength, increasing the reaction temperature from 230 to 300 °C resulted in a significant increase in compressive strength. The results reported herein reveal potential applications of both lignin and waste sulfur during the ongoing effort toward developing recyclable and sustainable building materials.

Systems genetic analysis of lignin biosynthesis in Populus tremula

The genetic control underlying natural variation in lignin content and composition in trees is not fully understood. We performed a systems genetic analysis to uncover the genetic regulation of lignin biosynthesis in a natural 'SwAsp' population of aspen (Populus tremula) trees. We analyzed gene expression by RNA sequencing (RNA-seq) in differentiating xylem tissues, and lignin content and composition using Pyrolysis-GC-MS in mature wood of 268 trees from 99 genotypes. Abundant variation was observed for lignin content and composition, and genome-wide association study identified proteins in the pentose phosphate pathway and arabinogalactan protein glycosylation among the top-ranked genes that are associated with these traits. Variation in gene expression and the associated genetic polymorphism was revealed through the identification of 312 705 local and 292 003 distant expression quantitative trait loci (eQTL). A co-expression network analysis suggested modularization of lignin biosynthesis and novel functions for the lignin-biosynthetic CINNAMYL ALCOHOL DEHYDROGENASE 2 and CAFFEOYL-CoA O-METHYLTRANSFERASE 3. PHENYLALANINE AMMONIA LYASE 3 was co-expressed with HOMEOBOX PROTEIN 5 (HB5), and the role of HB5 in stimulating lignification was demonstrated in transgenic trees. The systems genetic approach allowed linking natural variation in lignin biosynthesis to trees´ responses to external cues such as mechanical stimulus and nutrient availability.

Improving the production efficiency and sustainability of lignin-alcohol fuel processed at ambient temperature

Lignin represents a promising source of renewable energy. The development of CLEO (Cold processed Lignin Ethanol Oil) fuel introduces a novel lignin valorization approach, proposing its potential as maritime biofuel. However, its industrial success depends on enhancing fractionation yields and reducing solvent evaporation, which necessitates a detailed analysis of lignin properties, solvent types, and process parameters. By using novel combinations of biobased solvents, yields improved from 34 wt% to 49-53 wt% by using 30 wt% water or 40 wt% glycerol in ethanol, where Hildebrand Solubility Parameters emerged as indicative tool for increasing yields. Experiments on solid-to-liquid (S:L) ratios revealed a good balance between yield and lignin dispersion concentration at an S:L of 1:2.5. Producing CLEO with an improved solvent composition and S:L ratio resulted in 89 wt% yield while eliminating solvent evaporation requirements. This study highlights the potential for enhancing CLEO production efficiency and advancing it to industrial scale.

Perspective on Lignin Conversion Strategies That Enable Next Generation Biorefineries

The valorization of lignin, a currently underutilized component of lignocellulosic biomass, has attracted attention to promote a stable and circular bioeconomy. Successful approaches including thermochemical, biological, and catalytic lignin depolymerization have been demonstrated, enabling opportunities for lignino-refineries and lignocellulosic biorefineries. Although significant progress in lignin valorization has been made, this review describes unexplored opportunities in chemical and biological routes for lignin depolymerization and thereby contributes to economically and environmentally sustainable lignin-utilizing biorefineries. This review also highlights the integration of chemical and biological lignin depolymerization and identifies research gaps while also recommending future directions for scaling processes to establish a lignino-chemical industry.

Catabolism of β-5 linked aromatics by Novosphingobium aromaticivorans

Aromatic compounds are an important source of commodity chemicals traditionally produced from fossil fuels. Aromatics derived from plant lignin can potentially be converted into commodity chemicals through depolymerization followed by microbial funneling of monomers and low molecular weight oligomers. This study investigates the catabolism of the β-5 linked aromatic dimer dehydrodiconiferyl alcohol (DC-A) by the bacterium Novosphingobium aromaticivorans. We used genome-wide screens to identify candidate genes involved in DC-A catabolism. Subsequent in vivo and in vitro analyses of these candidate genes elucidated a catabolic pathway composed of four required gene products and several partially redundant dehydrogenases that convert DC-A to aromatic monomers that can be funneled into the central aromatic metabolic pathway of N. aromaticivorans. Specifically, a newly identified γ-formaldehyde lyase, PcfL, opens the phenylcoumaran ring to form a stilbene and formaldehyde. A lignostilbene dioxygenase, LsdD, then cleaves the stilbene to generate the aromatic monomers vanillin and 5-formylferulate (5-FF). We also showed that the aldehyde dehydrogenase FerD oxidizes 5-FF before it is decarboxylated by LigW, yielding ferulic acid. We found that some enzymes involved in the β-5 catabolism pathway can act on multiple substrates and that some steps in the pathway can be mediated by multiple enzymes, providing new insights into the robust flexibility of aromatic catabolism in N. aromaticivorans. A comparative genomic analysis predicted that the newly discovered β-5 aromatic catabolic pathway is common within the order Sphingomonadales.

IMPORTANCE

In the transition to a circular bioeconomy, the plant polymer lignin holds promise as a renewable source of industrially important aromatic chemicals. However, since lignin contains aromatic subunits joined by various chemical linkages, producing single chemical products from this polymer can be challenging. One strategy to overcome this challenge is using microbes to funnel a mixture of lignin-derived aromatics into target chemical products. This approach requires strategies to cleave the major inter-unit linkages of lignin to release monomers for funneling into valuable products. In this study, we report newly discovered aspects of a pathway by which the Novosphingobium aromaticivorans DSM12444 catabolizes aromatics joined by the second most common inter-unit linkage in lignin, the β-5 linkage. This work advances our knowledge of aromatic catabolic pathways, laying the groundwork for future metabolic engineering of this and other microbes for optimized conversion of lignin into products.

Quantitative and Structural Characterization of Native Lignin in Hardwood and Softwood Bark via Solid-State NMR Spectroscopy

A major factor limiting bark's industrial use is its greater recalcitrance compared to wood. While lignin is widely recognized as a significant contributor, precise characterization of lignin in bark remains sparse, presenting a crucial gap that impedes understanding of its impact. In this study, we employed advanced solid-state nuclear magnetic resonance (NMR) spectroscopy to analyze bark samples from various species, including willow, poplar, and pine. We established and verified that lignin methoxy peak at 56 ppm serves as a reliable quantitative metric to assess lignin content, with which we calculated the lignin contents in bark are significantly reduced by more than 70% compared to those in wood. Furthermore, in situ characterization revealed significant reduction of β-ether linkage in bark lignin across species, revealing a more condensed and resistant structural configuration. Our results have substantially advanced our comprehension of the composition and structure of native lignin in tree bark.

Valorization of Kraft Lignins from Different Poplar Genotypes as Vegetable Oil Structuring Agents via Electrospinning for Biolubricant Applications

This work explores the use of Kraft lignins sourced from different poplar genotypes (Populus alba L. "PO-10-10-20" and Populus × canadensis "Ballotino") isolated by selective acid precipitation (at pHs 5 and 2.5) to produce electrospun nanostructures that can be further employed for structuring vegetable oils. This approach offers a new avenue for converting these waste materials into high-value-added ingredients of eco-friendly structured lubricants. Electrospinning of poplar Kraft lignin (PKL)/cellulose acetate (CA) solutions yielded homogeneous beaded nanofiber mats that were able to generate stable dispersions when they were blended with different vegetable oils (castor, soybean, and high-oleic sunflower oils). Electrospun PKL/CA nanofiber mats with larger average fiber diameters were achieved using the lignins isolated at pH 5. Dispersions of PKL/CA nanofibers in vegetable oils presented gel-like viscoelastic characteristics and shear-thinning flow behavior, which slightly differ depending on the nanofiber morphological properties and can be tuned by selecting the poplar lignin genotype and precipitation pH. The rheological properties and tribological performance of PKL/CA nanofibers suitably dispersed in vegetable oils were found to be comparable to those obtained for conventional lubricating greases. Additionally, lignin nanofibers confer suitable oxidative stability to the ultimate formulations to different extents depending on the vegetable oil used.

The Laccase Catalysed Tandem Lignin Depolymerisation/Polymerisation

The development of strategies allowing either the production of high value phenolics, or the isolation of properties-enhanced materials from technical lignins represents a fundamental step in the industrial upcycling of technical lignins. Both aims are met by the strategy presented in the present work, relying on the coupling of solvent-based fractionation with the oxidative action of a new type of alkaline-stable genetically modified bacterial laccase. The described approach succeeded in the tandem, high-yield and selective isolation of valuable lignin-monomeric compounds (MCs) and high molecular weight and hydrophobicity-tailored polymerised materials (PMs) from two technical lignins, namely softwood kraft lignin (SKL), and wheat straw organosolv lignin (WSL). With respect to MCs, higher yields as compared to similar studies (up to 17.2 mg/g) were achieved. PMs from SKL samples where characterised by an almost quadrupled Mw, while in the case of WSL the Mw was approximately doubled. Noteworthy, the reaction conditions were optimized in terms of reaction temperature, time, enzymatic loading, and alkalinity for the selective production of single MCs. Most interestingly, technical lignins as well as their fractions and the PMs deriving from their laccase-catalysed oxidation showed increased hydrophobicity.

Valorization of lignin from aqueous-based lignocellulosic biorefineries

An additional 100 million tons/year of lignin coproduct will result when lignocellulosic biomass is processed in biorefineries to fiber, sugars, biofuels, and bioproducts. This will double the amount of lignin already generated from pulping and paper production. Unlike pulping that results in lignosulphonate (88% of total) or Kraft lignin (9%), aqueous-based biorefining leaves behind non-sulfonated lignin and aromatic molecules. This new type of lignin provides opportunities for large volume agricultural uses such as controlled-release carriers and soil amendments as well as feedstocks for new chemistries that lead to molecular building blocks for the chemical industry and to precursors for sustainable aviation biofuels.

A designed ZrOCl2/ethylene glycol deep eutectic solvent for efficient lignocellulose valorization

Deep eutectic solvents (DESs) hold great potential in biorefining because they can efficiently deconstruct the recalcitrant structure of lignocellulose. In particular, inorganic salts with Lewis acids have been proven to be effective at cleaving lignin-carbohydrate complexes. Herein, a Zr-based DES system composed of metal chloride hydrate (ZrOCl2·8H2O) and ethylene glycol (EG) was designed and used for poplar powder pretreatment. Zr4+-based salts provide sufficient acidity for lignocellulose depolymerization. The acidity of the DES was analysed by the Kamlet-Taft solvatochromic parameter, and the results demonstrated that the acidity can be regulated by the DES composition. Under the optimum conditions (ZrOCl2·8H2O:EG molar ratio of 1:2), the DES pretreatment removes nearly 100 % hemicellulose and 94.7 % lignin. The recovered lignin exhibited a low polydispersity of 1.7. The cellulose residues deliver an efficiency of 94.4 % upon enzymatic digestion. Moreover, the DES can be easily recovered with high yield and purity, and the recycled DES still maintains high delignification and enzymatic hydrolysis efficiencies. The proposed DES pretreatment technology is promising for biomass valorization.

Identification of key genes involved in lignin and flavonoid accumulation during Tilia tuan seed maturation

KEY MESSAGE

Transcriptomics and phenotypic data analysis identified 24 transcription factors (TFs) that play key roles in regulating the competitive accumulation of lignin and flavonoids. Tilia tuan Szyszyl. (T. tuan) is a timber tree species with important ecological and commercial value. However, its highly lignified pericarp results in a low seed germination rate and a long dormancy period. In addition, it is unknown whether there is an interaction between the biosynthesis of flavonoids and lignin as products of the phenylpropanoid pathway during seed development. To explore the molecular regulatory mechanism of lignin and flavonoid biosynthesis, T. tuan seeds were harvested at five stages (30, 60, 90, 120, and 150 days after pollination) for lignin and flavonoid analyses. The results showed that lignin accumulated rapidly in the early and middle stages (S1, S3, and S4), and rapid accumulation of flavonoids during the early and late stages (S1 and S5). High-throughput RNA sequencing analysis of developing seeds identified 50,553 transcripts, including 223 phenylpropanoid biosynthetic pathway genes involved in lignin accumulation grouped into 3 clusters, and 106 flavonoid biosynthetic pathway genes (FBPGs) grouped into 2 clusters. Subsequent WGCNA and time-ordered gene co-expression network (TO-GCN) analysis revealed that 24 TFs (e.g., TtARF2 and TtWRKY15) were involved in flavonoids and lignin biosynthesis regulation. The transcriptome data were validated by qRT-PCR to analyze the expression profiles of key enzyme-coding genes. This study revealed that there existed a competitive relationship between flavonoid and lignin biosynthesis pathway during the development of T. tuan seeds, that provide a foundation for the further exploration of molecular mechanisms underlying lignin and flavonoid accumulation in T. tuan seeds.

Carbon Fiber Film with Multi-Hollow Channels to Expedite Oxygen Electrocatalytic Reaction Kinetics for Flexible Zn-Air Battery

The high oxygen electrocatalytic overpotential of flexible cathodes due to sluggish reaction kinetics result in low energy conversion efficiency of wearable zinc-air batteries (ZABs). Herein, lignin, as a 3D flexible carbon-rich macromolecule, is employed for partial replacement of polyacrylonitrile and constructing flexible freestanding air electrodes (FFAEs) with large amount of mesopores and multi-hollow channels via electrospinning combined with annealing strategy. The presence of lignin with disordered structure decreases the graphitization of carbon fibers, increases the structural defects, and optimizes the pore structure, facilitating the enhancement of electron-transfer kinetics. This unique structure effectively improves the accessibility of graphitic-N/pyridinic-N with oxygen reduction reaction (ORR) activity and pyridinic-N with oxygen evolution reaction (OER) activity for FFAEs, accelerating the mass transfer process of oxygen-active species. The resulting N-doped hollow carbon fiber films (NHCFs) exhibit superior bifunctional ORR/OER performance with a low potential difference of only 0.60 V. The rechargeable ZABs with NHCFs as metal-free cathodes possess a long-term cycling stability. Furthermore, the NHCFs can be used as FFAEs for flexible ZABs which have a high specific capacity and good cycling stability under different bending states. This work paves the way to design and produce highly active metal-free bifunctional FFAEs for electrochemical energy devices.

Development of binderless fiberboard from poplar wood residue with Trametes hirsuta

The utilization of agricultural and forestry residues for the development and preparation of green binderless fiberboard (BF) is an effective way to realize high-value utilization of lignocellulose biomass resources. This study focuses on the fabrication of BF with excellent mechanical and waterproof properties, utilizing poplar wood residue (PWR) as raw material and Trametes hirsuta as a pretreatment method. During the fermentation process, lignin-degrading enzymes and biological factors, such as sugars, were produced by T. hirsuta, which activated lignin by depolymerizing lignin bonds and modifying structural functional groups, and forming new covalent bonds between poplar fibers, ultimately enhancing adhesion. Additionally, the activated lignin molecules and sugar molecules coalesce under high temperatures and pressures, forming a dense carbonization layer that bolsters the mechanical properties of the fiberboard and effectively shields it from rapid water infiltration. The bio-pretreated BF for 10 days shows a MOR and MOE of up to 36.1 Mpa and 3704.3 Mpa, respectively, which is 261% and 247.8% higher than that of the bio-untreated fiberboard, and the water swelling ratio (WSR) rate is only 5.6%. Chemical composition analysis revealed that repolymerization occurred among lignin, cellulose, and hemicellulose, especially the molecular weight of lignin changed significantly, with the Mw of lignin increasing from 312066 g/mol to 892362 g/mol, and then decreasing to 825021 g/mol. Mn increased from 277790 g/mol to 316987.5 g/mol and then decreased to 283299.5 g/mol at 21 days. Compared to other artificial fiberboards prepared through microbial pretreatment, the BF prepared by microorganisms in this study exhibited the highest mechanical properties among the poplar wood biobased panels.

Exploring the Effects of Lignin Nanoparticles in Different Zebrafish Inflammatory Models

Purpose

Lignin is the most abundant source of aromatic biopolymers and has gained interest in industrial and biomedical applications due to the reported biocompatibility and defense provided against bacterial and fungal pathogens, besides antioxidant and UV-blocking properties. Especially in the form of nanoparticles (NPs), lignin may display also antioxidant and anti-inflammatory activities.

Methods

To evaluate these characteristics, sonochemically nano-formulated pristine lignin (LigNPs) and enzymatically-phenolated one (PheLigNPs) were used to expose zebrafish embryos, without chorion, at different concentrations. Furthermore, two different zebrafish inflammation models were generated, by injecting Pseudomonas aeruginosa lipopolysaccharide (LPS) and by provoking a wound injury in the embryo caudal fin. The inflammatory process was investigated in both models by qPCR, analyzing the level of genes as il8, il6, il1β, tnfα, nfkbiaa, nfk2, and ccl34a.4, and by the evaluation of neutrophils recruitment, taking advantage of the Sudan Black staining, in the presence or not of LigNPs and PheLigNPs. Finally, the Wnt/β-catenin pathway, related to tissue regeneration, was investigated at the molecular level in embryos wounded and exposed to NPs.

Results

The data obtained demonstrated that the lignin-based NPs showed the capacity to induce a positive response during an inflammatory event, increasing the recruitment of cytokines to accelerate their chemotactic function. Moreover, the LigNPs and PheLigNPs have a role in the resolution of wounds, favoring the regeneration process.

Conclusion

In this paper, we used zebrafish embryos within 5 days post fertilization (hpf). Despite being an early-stage exemplary, the zebrafish embryos have proven their potential as predicting models. Further long-term experiments in adults will be needed to explore completely the biomedical capabilities of lignin NPs. The results underlined the safety of both NPs tested paved the way for further evaluations to exploit the anti-inflammatory and pro-healing properties of the lignin nanoparticles examined.

Green Extraction of Reed Lignin: The Effect of the Deep Eutectic Solvent Composition on the UV-Shielding and Antioxidant Properties of Lignin

Lignin, the second most abundant natural polymer, is a by-product of the biorefinery and pulp and paper industries. This study was undertaken to evaluate the properties and estimate the prospects of using lignin as a by-product of the pretreatment of common reed straw (Phragmites australis) with deep eutectic solvents (DESs) of various compositions: choline chloride/oxalic acid (ChCl/OA), choline chloride/lactic acid (ChCl/LA), and choline chloride/monoethanol amine (ChCl/EA). The lignin samples, hereinafter referred to as Lig-OA, Lig-LA, and Lig-EA, were obtained as by-products after optimizing the conditions of reed straw pretreatment with DESs in order to improve the efficiency of subsequent enzymatic hydrolysis. The lignin was studied using gel penetration chromatography, UV-vis, ATR-FTIR, and 1H and 13C NMR spectroscopy; its antioxidant activity was assessed, and the UV-shielding properties of lignin/polyvinyl alcohol composite films were estimated. The DES composition had a significant impact on the structure and properties of the extracted lignin. The lignin's ability to scavenge ABTS+• and DPPH• radicals, as well as the efficiency of UV radiation shielding, decreased as follows: Lig-OA > Lig-LA > Lig-EA. The PVA/Lig-OA and PVA/Lig-LA films with a lignin content of 4% of the weight of PVA block UV radiation in the UVA range by 96% and 87%, respectively, and completely block UV radiation in the UVB range.

Blue valorization of lignin-derived monomers via reprogramming marine bacterium Roseovarius nubinhibens

Biological valorization of lignin, the second most abundant biopolymer on Earth, is an indispensable sector to build a circular economy and net-zero future. However, lignin is recalcitrant to bioupcycling, demanding innovative solutions. We report here the biological valorization of lignin-derived aromatic carbon to value-added chemicals without requesting extra organic carbon and freshwater via reprogramming the marine Roseobacter clade bacterium Roseovarius nubinhibens. We discovered the unusual advantages of this strain for the oxidation of lignin monomers and implemented a CRISPR interference (CRISPRi) system with the lacI-Ptrc inducible module, nuclease-deactivated Cas9, and programmable gRNAs. This is the first CRISPR-based regulatory system in R. nubinhibens, enabling precise and efficient repression of genes of interest. By deploying the customized CRISPRi, we reprogrammed the carbon flux from a lignin monomer, 4-hydroxybenzoate, to achieve the maximum production of protocatechuate, a pharmaceutical compound with antibacterial, antioxidant, and anticancer properties, with minimal carbon to maintain cell growth and drive biocatalysis. As a result, we achieved a 4.89-fold increase in protocatechuate yield with a dual-targeting CRISPRi system, and the system was demonstrated with real seawater. Our work underscores the power of CRISPRi in exploiting novel microbial chassis and will accelerate the development of marine synthetic biology. Meanwhile, the introduction of a new-to-the-field lineage of marine bacteria unveils the potential of blue biotechnology leveraging resources from the ocean.IMPORTANCEOne often overlooked sector in carbon-conservative biotechnology is the water resource that sustains these enabling technologies. Similar to the "food-versus-fuel" debate, the competition of freshwater between human demands and bioproduction is another controversial issue, especially under global water scarcity. Here, we bring a new-to-the-field lineage of marine bacteria with unusual advantages to the stage of engineering biology for simultaneous carbon and water conservation. We report the valorization of lignin monomers to pharmaceutical compounds without requesting extra organic substrate (e.g., glucose) or freshwater by reprogramming the marine bacterium Roseovarius nubinhibens with a multiplex CRISPR interference system. Beyond the blue lignin valorization, we present a proof-of-principle of leveraging marine bacteria and engineering biology for a sustainable future.

Overcoming Challenges of Lignin Nanoparticles: Expanding Opportunities for Scalable and Multifunctional Nanomaterials

ConspectusThe increasing demand for polymeric materials derived from petroleum resources, along with rising concerns about climate change and global plastic pollution, has driven the development of biobased polymeric materials. Lignin, which is the second most abundant biomacromolecule after cellulose, represents a promising renewable raw material source for the preparation of advanced materials. The lucrative properties of lignin include its high carbon content (>60 atom %), high thermal stability, biodegradability, antioxidant activity, absorbance of ultraviolet radiation, and slower biodegradability compared to other wood components. Moreover, the advent of lignin nanoparticles (LNPs) over the last ten years has circumvented many well-known shortcomings of technical lignins, such as heterogeneity and poor compatibility with polymers, thereby unlocking the great potential of lignin for the development of advanced functional materials.LNPs stand out owing to their well-defined spherical shape and excellent colloidal stability, which is due to the electrostatic repulsion forces of carboxylic acid and phenolic hydroxyl groups enriched on their surface. These forces prevent their aggregation in aqueous dispersions (pH 3-9) and provide a high surface area to mass ratio that has been exploited to adsorb positively charged compounds such as enzymes or polymers. Consequently, it is not surprising that LNPs have become a prominent player in applied research in areas such as biocatalysis and polymeric composites, among others. However, like all ventures of life, LNPs also face certain challenges that limit their potential end-uses. Solvent instability remains the most challenging aspect due to the tendency of these particles to dissolve or aggregate in organic solvents and basic or acidic pH, thus limiting the window for their chemical functionalization and applications. In addition, the need for organic solvent during their preparation, the poor miscibility with hydrophobic polymeric matrices, and the nascent phase regarding their use in smart materials have been identified as important challenges that need to be addressed.In this Account, we recapitulate our efforts over the past years to overcome the main limitations mentioned above. We begin with a brief introduction to the fundamentals of LNPs and a detailed discussion of their associated challenges. We then highlight our work on: (i) Preparation of lignin-based nanocomposites with improved properties through a controlled dispersion of LNPs within a hydrophobic polymeric matrix, (ii) Stabilization of LNPs via covalent (intraparticle cross-linking) and noncovalent (hydration barrier) approaches, (iii) The development of an organic-solvent-free method for the production of LNPs, and (iv) The development of LNPs toward smart materials with high lignin content. Finally, we also offer our perspectives on this rapidly growing field.

Recent Advances on the Functionalities of Polyoxometalate-Based Ionic Liquids

Polyoxometalate (POM)-based ionic liquids (POM-ILs) are gaining increasing attention due to their diverse structures and functionalities. POMs in POM-ILs not only act as essential structural building blocks but also play a crucial role in their functional performance. With the incorporation of POMs, POM-ILs find applications in various fields such as chemical catalysis, energy science, materials science, sensors, and more. The abundant availability of POMs and other building blocks in POM-ILs, along with their versatile combination possibilities, present promising opportunities for the future. Rather than focusing solely on discovering new structures of POM-ILs, current developments in this field emphasize exploring their functions, leading to the emergence of numerous new applications. Summarizing these advancements aids in understanding the latest trends and facilitates rapid evolution. This review examines the recent five years' worth of results to analyze the new functions of POM-ILs, categorizing them based on their unique characteristics.

Characterization techniques for tobacco and its derivatives: a systematic review

Biomass and its derivatives have broad applications in the fields of bio-catalysis, energy storage, environmental remediation. The structure and components of biomass, which are vital parameters affecting corresponding performances of derived products, need to be fully understood for further regulating the biomass and its derivatives. Herein, tobacco is taken as an example of biomass to introduce the typical characterization techniques in unraveling the structural information, chemical components, and properties of biomass and its derivatives. Firstly, the structural information, chemical components and application for biomass are summarized. Then the characterization techniques together with the resultant structural information and chemical components are introduced. Finally, to promote a wide and deep study in this field, the perspectives and challenges concerning structure and composition charaterization in biomass and its derivatives are put forward.

The Impact of Lignin Biopolymer Sources, Isolation, and Size Reduction from the Macro- to Nanoscale on the Performances of Next-Generation Sunscreen

In recent years, concerns about the harmful effects of synthetic UV filters on the environment have highlighted the need for natural sun blockers. Lignin, the most abundant aromatic renewable biopolymer on Earth, is a promising candidate for next-generation sunscreen due to its inherent UV absorbance and its green, biodegradable, and biocompatible properties. Lignin's limitations, such as its dark color and poor dispersity, can be overcome by reducing particle size to the nanoscale, enhancing UV protection and formulation. In this study, 100-200 nm lignin nanoparticles (LNPs) were prepared from various biomass by-products (hardwood, softwood, and herbaceous material) using an eco-friendly anti-solvent precipitation method. Pure lignin macroparticles (LMPs) were extracted from beech, spruce, and wheat straw using an ethanol-organosolv treatment and compared with sulfur-rich kraft lignin (KL). Sunscreen lotions made from these LMPs and LNPs at various concentrations demonstrated novel UV-shielding properties based on biomass source and particle size. The results showed that transitioning from the macro- to nanoscale increased the sun protection factor (SPF) by at least 2.5 times, with the best results improving the SPF from 7.5 to 42 for wheat straw LMPs and LNPs at 5 wt%. This study underscores lignin's potential in developing high-quality green sunscreens, aligning with green chemistry principles.

Parascedosporium putredinis NO1 tailors its secretome for different lignocellulosic substrates

Parascedosporium putredinis NO1 is a plant biomass-degrading ascomycete with a propensity to target the most recalcitrant components of lignocellulose. Here we applied proteomics and activity-based protein profiling (ABPP) to investigate the ability of P. putredinis NO1 to tailor its secretome for growth on different lignocellulosic substrates. Proteomic analysis of soluble and insoluble culture fractions following the growth of P. putredinis NO1 on six lignocellulosic substrates highlights the adaptability of the response of the P. putredinis NO1 secretome to different substrates. Differences in protein abundance profiles were maintained and observed across substrates after bioinformatic filtering of the data to remove intracellular protein contamination to identify the components of the secretome more accurately. These differences across substrates extended to carbohydrate-active enzymes (CAZymes) at both class and family levels. Investigation of abundant activities in the secretomes for each substrate revealed similar variation but also a high abundance of "unknown" proteins in all conditions investigated. Fluorescence-based and chemical proteomic ABPP of secreted cellulases, xylanases, and β-glucosidases applied to secretomes from multiple growth substrates for the first time confirmed highly adaptive time- and substrate-dependent glycoside hydrolase production by this fungus. P. putredinis NO1 is a promising new candidate for the identification of enzymes suited to the degradation of recalcitrant lignocellulosic feedstocks. The investigation of proteomes from the biomass bound and culture supernatant fractions provides a more complete picture of a fungal lignocellulose-degrading response. An in-depth understanding of this varied response will enhance efforts toward the development of tailored enzyme systems for use in biorefining.IMPORTANCEThe ability of the lignocellulose-degrading fungus Parascedosporium putredinis NO1 to tailor its secreted enzymes to different sources of plant biomass was revealed here. Through a combination of proteomic, bioinformatic, and fluorescent labeling techniques, remarkable variation was demonstrated in the secreted enzyme response for this ascomycete when grown on multiple lignocellulosic substrates. The maintenance of this variation over time when exploring hydrolytic polysaccharide-active enzymes through fluorescent labeling, suggests that this variation results from an actively tailored secretome response based on substrate. Understanding the tailored secretomes of wood-degrading fungi, especially from underexplored and poorly represented families, will be important for the development of effective substrate-tailored treatments for the conversion and valorization of lignocellulose.

Resolution-enhanced Kendrick mass defect analysis for improved mass spectrometry characterization of lignin

Lignin is a promising renewable source of valuable organic compounds and environmentally benign materials. However, its involvement in economic circulation and the creation of new biorefining technologies require an understanding of its chemical composition and structure. This problem can be overcome by applying mass spectrometry analytical techniques in combination with advanced chemometric methods for mass spectra processing. The present study is aimed at the development of mass defect filtering to characterize the chemical composition of lignin at the molecular level. This study introduces a novel approach involving resolution-enhanced Kendrick mass defect (REKMD) analysis for the processing of atmospheric pressure photoionization Orbitrap mass spectra of lignin. The set of priority Kendrick fractional base units was predefined in model experiments and provided a substantially expanding available mass defect range for the informative visualization of lignin mass spectra. The developed REKMD analysis strategy allowed to obtain the most complete data on all the homologous series typical of lignin and thus facilitated the interpretation and assignment of elemental compositions and structural formulas to oligomers detected in extremely complex mass spectra, including tandem ones. For the first time, the minor modifications (sulfation) of lignin obtained in ionic liquid-based biorefining processes were revealed.

Enabling Lignin Valorization Through Integrated Advances in Plant Biology and Biorefining

Despite lignin having long been viewed as an impediment to the processing of biomass for the production of paper, biofuels, and high-value chemicals, the valorization of lignin to fuels, chemicals, and materials is now clearly recognized as a critical element for the lignocellulosic bioeconomy. However, the intended application for lignin will likely require a preferred lignin composition and form. To that end, effective lignin valorization will require the integration of plant biology, providing optimal feedstocks, with chemical process engineering, providing efficient lignin transformations. Recent advances in our understanding of lignin biosynthesis have shown that lignin structure is extremely diverse and potentially tunable, while simultaneous developments in lignin refining have resulted in the development of several processes that are more agnostic to lignin composition. Here, we review the interface between in planta lignin design and lignin processing and discuss the advances necessary for lignin valorization to become a feature of advanced biorefining.

Safety profiling of technical lignins originating from various bioresources and conversion processes

In this work, a set of eight technical lignin samples from various botanical origins and production processes were characterized for their chemical composition, higher heating value, size distribution, dust explosion sensitivity and severity, thermal hazard characteristics and biodegradability, in further support of their sustainable use. More specifically, safety-focused parameters have been assessed in terms of consistency with relating physico-chemical properties determined for the whole set of technical lignins. The results emphasized the heterogeneity and variability of technical lignins and the subsequent need for a comprehensive characterization of new lignin feedstocks arising from novel biorefineries. Indeed, significant differences were revealed between the samples in terms of hazards sensitivity. This first comparative physico-chemical safety profiling of technical lignins could be useful for the hazard analysis and the safe design of the facilities associated with large scale valorisation of biomass residues such as lignins, targeting "zero waste" sustainable conversion of bioresources.

The Phylogeny and Metabolic Potentials of an Aromatics-Degrading Marivivens Bacterium Isolated from Intertidal Seawater in East China Sea

Lignocellulosic materials, made up of cellulose, hemicellulose, and lignin, constitute some of the most prevalent types of biopolymers in marine ecosystems. The degree to which marine microorganisms participate in the breakdown of lignin and their impact on the cycling of carbon in the oceans is not well understood. Strain LCG002, a novel Marivivens species isolated from Lu Chao Harbor's intertidal seawater, is distinguished by its ability to metabolize lignin and various aromatic compounds, including benzoate, 3-hydroxybenzoate, 4-hydroxybenzoate and phenylacetate. It also demonstrates a broad range of carbon source utilization, including carbohydrates, amino acids and carboxylates. Furthermore, it can oxidize inorganic gases, such as hydrogen and carbon monoxide, providing alternative energy sources in diverse marine environments. Its diversity of nitrogen metabolism is supported by nitrate/nitrite, urea, ammonium, putrescine transporters, as well as assimilatory nitrate reductase. For sulfur assimilation, it employs various pathways to utilize organic and inorganic substrates, including the SOX system and DSMP utilization. Overall, LCG002's metabolic versatility and genetic profile contribute to its ecological significance in marine environments, particularly in the degradation of lignocellulosic material and aromatic monomers.

Recent Progress in the Conversion of Methylfuran into Value-Added Chemicals and Fuels

2-methylfuran is a significant organic chemical raw material which can be produced by hydrolysis, dehydration, and selective hydrogenation of biomass hemicellulose. 2-methylfuran can be converted into value-added chemicals and liquid fuels. This article reviews the latest progress in the synthesis of liquid fuel precursors through hydroxyalkylation/alkylation reactions of 2-methylfuran and biomass-derived carbonyl compounds in recent years. 2-methylfuran reacts with olefins through Diels-Alder reactions to produce chemicals, and 2-methylfuran reacts with anhydrides (or carboxylic acids) to produce acylated products. In the future application of 2-methylfuran, developing high value-added chemicals and high-density liquid fuels are two good research directions.