Surface-Enhanced Raman Spectroscopy and Electrochemistry: The Ultimate Chemical Sensing and Manipulation Combination

One of the lessons we learned from the COVID-19 pandemic is that the need for ultrasensitive detection systems is now more critical than ever. While sensors' sensitivity, portability, selectivity, and low cost are crucial, new ways to couple synergistic methods enable the highest performance levels. This review article critically discusses the synergetic combinations of optical and electrochemical methods. We also discuss three key application fields-energy, biomedicine, and environment. Finally, we selected the most promising approaches and examples, the open challenges in sensing, and ways to overcome them. We expect this work to set a clear reference for developing and understanding strategies, pros and cons of different combinations of electrochemical and optical sensors integrated into a single device.

Frictional behavior of one-dimensional materials: an experimental perspective

The frictional behavior of one-dimensional (1D) materials, including nanotubes, nanowires, and nanofibers, significantly influences the efficient fabrication, functionality, and reliability of innovative devices integrating 1D components. Such devices comprise piezoelectric and triboelectric nanogenerators, biosensing and implantable devices, along with biomimetic adhesives based on 1D arrays. This review compiles and critically assesses recent experimental techniques for exploring the frictional behavior of 1D materials. Specifically, it underscores various measurement methods and technologies employing atomic force microscopy, electron microscopy, and optical microscopy nanomanipulation. The emphasis is on their primary applications and challenges in measuring and characterizing the frictional behavior of 1D materials. Additionally, we discuss key accomplishments over the past two decades in comprehending the frictional behaviors of 1D materials, with a focus on factors such as materials combination, interface roughness, environmental humidity, and non-uniformity. Finally, we offer a brief perspective on ongoing challenges and future directions, encompassing the systematic investigation of the testing environment and conditions, as well as the modification of surface friction through surface alterations.

Repurposing Kraft black Liquor as Reductant for Enhanced Lithium-Ion Battery Leaching

The economic advantages of H2SO4 make it the acid of choice for the hydrometallurgical treatment of waste lithium-ion batteries (LIBs). However, to facilitate the full dissolution of the higher valency metal oxides present in the cathode black mass, a suitable reducing agent is required. Herein, the application of industrial black liquor (BL) obtained from the Kraft pulping for papermaking is investigated as a renewable reducing agent for the enhanced leaching of transition metals from LIB powder with H2SO4. The addition of acidified BL to H2SO4 significantly improved the leaching efficiency for a range of LIB cathode chemistries, with the strongest effect observed for manganese-rich active material. Focusing on NMC111 (LiMnxCoyNizO2) material, a linear correlation between the BL concentration and the leaching yield of Mn was obtained, with the best overall leaching efficiencies being achieved for 2.0 mol L-1 H2SO4 and 50 vol % of BL at 353 K. A quasi-total degradation of oxygenated and aromatic groups from the BL during NMC111 dissolution was observed after leaching, suggesting that these chemical groups are essential for LIB reduction. Finally, the leached transition metals could be easily recovered by pH adjustment and oxalic acid addition, closing the resource loop and fostering resource efficiency.

Covalent Bonding of MXene/COF Heterojunction for Ultralong Cycling Li-Ion Battery Electrodes

Covalent organic frameworks (COFs) have emerged as promising renewable electrode materials for LIBs and gained significant attention, but their capacity has been limited by the densely packed 2D layer structures, low active site availability, and poor electronic conductivity. Combining COFs with high-conductivity MXenes is an effective strategy to enhance their electrochemical performance. Nevertheless, simply gluing them without conformal growth and covalent linkage restricts the number of redox-active sites and the structural stability of the composite. Therefore, in this study, a covalently assembled 3D COF on Ti3C2 MXenes (Ti3C2@COF) is synthesized and serves as an ultralong cycling electrode material for LIBs. Due to the covalent bonding between the COF and Ti3C2, the Ti3C2@COF composite exhibits excellent stability, good conductivity, and a unique 3D cavity structure that enables stable Li+ storage and rapid ion transport. As a result, the Ti3C2-supported 3D COF nanosheets deliver a high specific capacity of 490 mAh g-1 at 0.1 A g-1, along with an ultralong cyclability of 10,000 cycles at 1 A g-1. This work may inspire a wide range of 3D COF designs for high-performance electrode materials.

Conjugation and Topology Engineering of 2D π-d Conjugated Metal-Organic Frameworks for Robust Potassium Organic Batteries

The evolution of two-dimensional conjugated metal-organic frameworks (2D c-MOFs) provides a significant prospect for researching the next generation of green and advanced energy storage systems (ESSs). Especially, conjugation and topology engineering serve as an irreplaceable character in adjusting the electrochemical properties of ESSs. Herein, we proposed a novel strategy using conjugation and topology engineering to demonstrate the application of 2D c-MOFs in robust potassium-ion batteries (PIBs) for the first time. By comparing 2D c-MOFs with the rhombus/kagome structure as well as three/four-arm core, the rhombus structure (sql-Cu-TBA-MOF) cathode for PIBs can display the impressive electrochemical performance, including a high specific discharge capacity of 178.4 mAh g-1 (at 0.2 A g-1) and a well long-term cycle stability of more than 9,000 (at 10.0 A g-1). Moreover, full PIBs (FPIBs) are constructed by pairing sql-Cu-TBA-MOF cathode with dipotassium terephthalate (KTP) anode, which delivers a high reversible discharge specific capacity of 146.6 mAh g-1 (at 0.1 A g-1) and great practical application prospect. These findings provide reasonable implications for the design of 2D c-MOFs from the perspective of conjugation and topology engineering for advanced energy storage systems.

Comprehensive review of emerging contaminants: Detection technologies, environmental impact, and management strategies

Emerging contaminants (ECs) are a diverse group of unregulated pollutants increasingly present in the environment. These contaminants, including pharmaceuticals, personal care products, endocrine disruptors, and industrial chemicals, can enter the environment through various pathways and persist, accumulating in the food chain and posing risks to ecosystems and human health. This comprehensive review examines the chemical characteristics, sources, and varieties of ECs. It critically evaluates the current understanding of their environmental and health impacts, highlighting recent advancements and challenges in detection and analysis. The review also assesses existing regulations and policies, identifying shortcomings and proposing potential enhancements. ECs pose significant risks to wildlife and ecosystems by disrupting animal hormones, causing genetic alterations that diminish diversity and resilience, and altering soil nutrient dynamics and the physical environment. Furthermore, ECs present increasing risks to human health, including hormonal disruptions, antibiotic resistance, endocrine disruption, neurological effects, carcinogenic effects, and other long-term impacts. To address these critical issues, the review offers recommendations for future research, emphasizing areas requiring further investigation to comprehend the full implications of these contaminants. It also suggests increased funding and support for research, development of advanced detection technologies, establishment of standardized methods, adoption of precautionary regulations, enhanced public awareness and education, cross-sectoral collaboration, and integration of scientific research into policy-making. By implementing these solutions, we can improve our ability to detect, monitor, and manage ECs, reducing environmental and public health risks.

Constructing static two-electron lithium-bromide battery

Despite their potential as conversion-type energy storage technologies, the performance of static lithium-bromide (SLB) batteries has remained stagnant for decades. Progress has been hindered by the intrinsic liquid-liquid redox mode and single-electron transfer of these batteries. Here, we developed a high-performance SLB battery based on the active bromine salt cathode and the two-electron transfer chemistry with a Br-/Br+ redox couple by electrolyte tailoring. The introduction of NO3- improved the reversible single-electron transition of Br-, and more impressively, the coordinated Cl- anions activated the Br+ conversion to provide an additional electron transfer. A voltage plateau was observed at 3.8 V, and the discharge capacity and energy density were increased by 142 and 159% compared to the one-electron reaction benchmark. This two-step conversion mechanism exhibited excellent stability, with the battery functioning for 1000 cycles. These performances already approach the state of the art of currently established Li-halogen batteries. We consider the established two-electron redox mechanism highly exemplary for diversified halogen batteries.

Impact of BSA and Au3+ concentration on the formation and fluorescence properties of Au nanoclusters

Bovine serum albumin-stabilized Au nanoclusters (BSA-Au NCs) have emerged as promising contenders for imaging agents and highly sensitive fluorescence sensors due to their biocompatibility and strong photoluminescence. Optimizing the synthesis conditions of BSA-Au NCs is crucial for enhancing fluorescence imaging and other nanocluster applications. In this study, for the first time, we systematically investigated the effects of BSA concentration and Au3+ on both particle size and optical characteristics of BSA-Au NCs. When the two components achieved a suitable concentration ratio, it was beneficial to form BSA-Au NCs with a high quantum yield (QY = 74.30%) and good fluorescence stability. In contrast, an inappropriate concentration ratio would lead to the formation of gold nanoparticles (Au NPs), and their internal filtration effect (IFE) would attenuate the fluorescence emission of BSA-Au NCs. The BSA-Au NCs were then employed as efficient fluorescence sensors for detecting Hg2+. Furthermore, the growth mechanism of BSA-Au NCs was elucidated by monitoring fluorescence changes during different incubation times. The BSA-Au NCs with a high quantum yield introduce a novel synthetic concept for sensitive fluorescent probes and expanding versatile applications of BSA-Au NCs in catalysis, chemical sensing and biomedicine.

Enhanced peroxidase-like activity of Cu-Cu2O composite film through PtPd immobilization for colorimetric glucose detection

In this study, Cu-Cu2O/PtPd nanocomposites were synthesized and characterized for their peroxidase-like enzyme activity. X-ray diffraction and energy dispersive X-ray spectroscopy analyses confirmed the successful synthesis of the nanocomposites, which exhibited a flower-like morphology and a more uniform dispersion than Cu-Cu2O. The catalytic activity of Cu-Cu2O/PtPd was evaluated using the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB), finding that Cu-Cu2O/PtPd outperformed Cu-Cu2O. The optimal temperature and pH for the catalytic activity of Cu-Cu2O/PtPd were determined to be 40 °C and pH 4.0, respectively. A kinetic analysis revealed that Cu-Cu2O/PtPd followed Michaelis-Menten kinetics and exhibited a higher affinity toward TMB than the horseradish peroxidase enzyme. The catalytic mechanism of Cu-Cu2O/PtPd involved the generation of hydroxyl radicals, which facilitated the oxidation of TMB. Furthermore, the Cu-Cu2O/PtPd nanocomposite was successfully applied for the colorimetric detection of glucose, demonstrating a linear range of 8-90 μM, a detection limit of 2.389 μM, and high selectivity for glucose over other sugars.

Super-Stretchable and High-Energy Micro-Pseudocapacitors Based on MXene Embedded Ag Nanoparticles

The advancement of aqueous micro-supercapacitors offers an enticing prospect for a broad spectrum of applications, spanning from wearable electronics to micro-robotics and sensors. Unfortunately, conventional micro-supercapacitors are characterized by low capacity and slopy voltage profiles, limiting their energy density capabilities. To enhance the performance of these devices, the use of 2D MXene-based compounds has recently been proposed. Apart from their capacitive contributions, these structures can be loaded with redox-active nanowires which increase their energy density and stabilize their operation voltage. However, introducing rigid nanowires into MXene films typically leads to a significant decline in their mechanical properties, particularly in terms of flexibility. To overcome this issue, super stretchable micro-pseudocapacitor electrodes composed of MXene nanosheets and in situ reconstructed Ag nanoparticles (Ag-NP-MXene) are herein demonstrated, delivering high energy density, stable operation voltage of ≈1 V, and fast charging capabilities. Careful experimental analysis and theoretical simulations of the charging mechanism of the Ag-NP-MXene electrodes reveal a dual nature charge storage mechanism involving ad(de)sorption of ions and conversion reaction of Ag nanoparticles. The superior mechanical properties of synthesized films obtained through in situ construction of Ag-NP-MXene structure show an ultra stretchability, allowing the devices to provide stable voltage and energy output even at 100% elongation.

The drug loading capacity prediction and cytotoxicity analysis of metal-organic frameworks using stacking algorithms of machine learning

Metal-organic frameworks (MOFs) have shown excellent performance in the field of drug delivery. Despite the synthesis of a vast array of MOFs exceeding 100,000 varieties, certain formulations have exhibited suboptimal performance characteristics. Therefore, there is a pressing need to enhance their efficacy by identifying MOFs with superior drug loading capacities and minimal cytotoxicity, which can be achieved through machine learning (ML). In this study, a stacking regression model was developed to predict drug loading capacity and cytotoxicity of MOFs using datasets compiled from various literature sources. The model exhibited exceptional predictive capabilities, achieving R2 values of 0.907 for drug loading capacity and 0.856 for cytotoxicity. Furthermore, various model interpretation methods including partial dependence plots, individual conditional expectation, Shapley additive explanation, decision tree, random forest, CatBoost Regressor, and light gradient-boosting machine were employed for feature importance analysis. The results revealed that specific metal atoms such as Zn, Cr, Fe, Zr, and Cu significantly influenced the drug loading capacity and cytotoxicity of MOFs. Through model validation encompassing experimental validation and computational verification, the reliability of the model was thoroughly established. In general, it is a good practice to use ML methods for predicting drug loading capacity and cytotoxicity analysis of MOFs, guiding the development of future property prediction methods for MOFs.

Controlled Growth Lateral/Vertical Heterostructure Interface for Lithium Storage

Artificial heterostructures with structural advancements and customizable electronic interfaces are fundamental for achieving high-performance lithium-ion batteries (LIBs). Here, a design idea for a covalently bonded lateral/vertical black phosphorus (BP)-graphdiyne oxide (GDYO) heterostructure achieved through a facile ball-milling approach, is designed. Lateral heterogeneity is realized by the sp2-hybridized mode P-C bonds, which connect the phosphorus atoms at the edges of BP with the carbon atoms of the terminal acetylene in GDYO. The vertical connection of the heterojunction of BP and GDYO is connected by P-O-C bond. Experimental and theoretical studies demonstrate that BP-GDYO incorporates interfacial and structural engineering features, including built-in electric fields, chemical bond interactions, and maximized nanospace confinement effects. Therefore, BP-GDYO exhibits improved electrochemical kinetics and enhanced structural stability. Moreover, through ex- and in-situ studies, the lithiation mechanism of BP-GDYO, highlighting that the introduction of GDYO inhibits the shuttle/dissolution effect of phosphorus intermediates, hinders volume expansion, provides more reactive sites, and ultimately promotes reversible lithium storage, is clarified. The BP-GDYO anode exhibits lithium storage performance with high-rate capacity and long-cycle stability (602.6 mAh g-1 after 1 000 cycles at 2.0 A g-1). The proposed interfacial and structural engineering is universal and represents a conceptual advance in building high-performance LIBs electrode.

High Volumetric Energy Density Supercapacitor of Additive-Free Quantum Dot Hierarchical Nanopore Structure

The high surface-area-to-volume ratio of colloidal quantum dots (QDs) positions them as promising materials for high-performance supercapacitor electrodes. However, the challenge lies in achieving a highly accessible surface area, while maintaining good electrical conductivity. An efficient supercapacitor demands a dense yet highly porous structure that facilitates efficient ion-surface interactions and supports fast charge mobility. Here we demonstrate the successful development of additive-free ultrahigh energy density electric double-layer capacitors based on quantum dot hierarchical nanopore (QDHN) structures. Lead sulfide QDs are assembled into QDHN structures that strike a balance between electrical conductivity and efficient ion diffusion by employing meticulous control over inter-QD distances without any additives. Using ionic liquid as the electrolyte, the high-voltage ultrathin-film microsupercapacitors achieve a remarkable combination of volumetric energy density (95.6 mWh cm-3) and power density (13.5 W cm-3). This achievement is attributed to the intrinsic capability of QDHN structures to accumulate charge carriers efficiently. These findings introduce innovative concepts for leveraging colloidal nanomaterials in the advancement of high-performance energy storage devices.

External Field-Responsive Ternary Non-Noble Metal Oxygen Electrocatalyst for Rechargeable Zinc-Air Batteries

Despite the increasing effort in advancing oxygen electrocatalysts for zinc-air batteries (ZABs), the performance development gradually reaches a plateau via only ameliorating the electrocatalyst materials. Herein, a new class of external field-responsive electrocatalyst comprising Ni0.5Mn0.5Fe2O4 stably dispersed on N-doped Ketjenblack (Ni0.5Mn0.5Fe2O4/N-KB) is developed via polymer-assisted strategy for practical ZABs. Briefly, the activity indicator ΔE is significantly decreased to 0.618 V upon photothermal assistance, far exceeding most reported electrocatalysts (generally >0.680 V). As a result, the photothermal electrocatalyst possesses comprehensive merits of excellent power density (319 mW cm-2), ultralong lifespan (5163 cycles at 25 mA cm-2), and outstanding rate performance (100 mA cm-2) for liquid ZABs, and superb temperature and deformation adaptability for flexible ZABs. Such improvement is attributed to the photothermal-heating-enabled synergy of promoted electrical conductivity, reactant-molecule motion, active area, and surface reconstruction, as revealed by operando Raman and simulation. The findings open vast possibilities toward more-energy-efficient energy applications.

Structural disorder determines capacitance in nanoporous carbons

The difficulty in characterizing the complex structures of nanoporous carbon electrodes has led to a lack of clear design principles with which to improve supercapacitors. Pore size has long been considered the main lever to improve capacitance. However, our evaluation of a large series of commercial nanoporous carbons finds a lack of correlation between pore size and capacitance. Instead, nuclear magnetic resonance spectroscopy measurements and simulations reveal a strong correlation between structural disorder in the electrodes and capacitance. More disordered carbons with smaller graphene-like domains show higher capacitances owing to the more efficient storage of ions in their nanopores. Our findings suggest ways to understand and exploit disorder to achieve highly energy-dense supercapacitors.

Boosting lithium storage in covalent triazine framework for symmetric all-organic lithium-ion batteries by regulating the degree of spatial distortion

Covalent triazine frameworks (CTFs) with tunable structure, fine molecular design and low cost have been regarded as a class of ideal electrode materials for lithium-ion batteries (LIBs). However, the tightly layered structure possessed by the CTFs leads to partial hiding of the redox active site, resulting in their unsatisfactory electrochemical performance. Herein, two CTFs (BDMI-CTF and TCNQ-CTF) with higher degree of structural distortion, more active sites exposed, and large lattice pores were prepared by dynamic trimerization reaction of cyano. As a result, BDMI-CTF as a cathode material for LIBs exhibits high initial capacity of 186.5 mAh/g at 50 mA g-1 and superior cycling stability without capacity loss after 2000 cycles at 1000 mA g-1 compared with TCNQ-CTF counterparts. Furthermore, based on their bipolar functionality, BDMI-CTF can be used as both cathode and anode materials for symmetric all-organic batteries (SAOBs), and this work will open a new window for the rational design of high performance CTF-based LIBs.

Mechanisms of the Accelerated Li+ Conduction in MOF-Based Solid-State Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Solid polymer electrolytes (SPEs) for lithium metal batteries have garnered considerable interests owing to their low cost, flexibility, lightweight, and favorable interfacial compatibility with battery electrodes. Their soft mechanical nature compared to solid inorganic electrolytes give them a large advantage to be used in low pressure solid-state lithium metal batteries, which can avoid the cost and weight of the pressure cages. However, the application of SPEs is hindered by their relatively low ionic conductivity. In addressing this limitation, enormous efforts are devoted to the experimental investigation and theoretical calculations/simulation of new polymer classes. Recently, metal-organic frameworks (MOFs) have been shown to be effective in enhancing ion transport in SPEs. However, the mechanisms in enhancing Li+ conductivity have rarely been systematically and comprehensively analyzed. Therefore, this review provides an in-depth summary of the mechanisms of MOF-enhanced Li+ transport in MOF-based solid polymer electrolytes (MSPEs) in terms of polymer, MOF, MOF/polymer interface, and solid electrolyte interface aspects, respectively. Moreover, the understanding of Li+ conduction mechanisms through employing advanced characterization tools, theoretical calculations, and simulations are also reviewed in this review. Finally, the main challenges in developing MSPEs are deeply analyzed and the corresponding future research directions are also proposed.

Enhancing Energy Storage Capacity of 3D Carbon Electrodes Using Soft Landing of Molecular Redox Mediators

The incorporation of redox-active species into the electric double layer is a powerful strategy for enhancing the energy density of supercapacitors. Polyoxometalates (POM) are a class of stable, redox-active species with multielectron activity, which is often used to tailor the properties of electrochemical interfaces. Traditional synthetic methods often result in interfaces containing a mixture of POM anions, unreactive counter ions, and neutral species. This leads to degradation in electrochemical performance due to aggregation and increased interfacial resistance. Another significant challenge is achieving the uniform and stable anchoring of POM anions on substrates to ensure the long-term stability of the electrochemical interface. These challenges are addressed by developing a mass spectrometry-based subambient deposition strategy for the selective deposition of POM anions onto engineered 3D porous carbon electrodes. Furthermore, positively charged functional groups are introduced on the electrode surface for efficient trapping of POM anions. This approach enables the deposition of purified POM anions uniformly through the pores of the 3D porous carbon electrode, resulting in unprecedented increase in the energy storage capacity of the electrodes. The study highlights the critical role of well-defined electrochemical interfaces in energy storage applications and offers a powerful method to achieve this through selective ion deposition.

Optimizing Performance in Supercapacitors through Surface Decoration of Bismuth Nanosheets

Bismuth (Bi) exhibits a high theoretical capacity, excellent electrical conductivity properties, and remarkable interlayer spacing, making it an ideal electrode material for supercapacitors. However, during the charge and discharge processes, Bi is prone to volume expansion and pulverization, resulting in a decline in the capacitance. Deposition of a nonmetal on its surface is considered an effective way to modulate its morphology and electronic structure. Herein, we employed the chemical vapor deposition technique to fabricate Se-decorated Bi nanosheets on a nickel foam (NF) substrate. Various characterizations indicated that the deposition of Se on Bi nanosheets regulated their surface morphology and chemical state, while sustaining their pristine phase structure. Electrochemical tests demonstrated that Se-decorated Bi nanosheets exhibited a 51.1% improvement in capacity compared with pristine Bi nanosheets (1313 F/g compared to 869 F/g at a current density of 5 A/g). The energy density of the active material in an assembled asymmetric supercapacitor could reach 151.2 Wh/kg at a power density of 800 W/kg. These findings suggest that Se decoration is a promising strategy to enhance the capacity of the Bi nanosheets.

Electrochemical Doping and Structural Modulation of Conductive Metal-Organic Frameworks

In this study, we introduce an electrochemical doping strategy aimed at manipulating the structure and composition of electrically conductive metal-organic frameworks (c-MOFs). Our methodology is exemplified through a representative c-MOF, Ni3(HITP)2 (HITP=2, 3, 6, 7, 10, 11-hexaiminotriphenylene), synthesized into porous thin films supported by nanocellulose. While the c-MOF exhibits characteristic capacitive behavior in neutral electrolyte; it manifests redox behaviors in both acidic and alkaline electrolytes. Evidence indicates that the organic ligands within c-MOF undergo oxidation (p-doping) and reduction (n-doping) when exposed to specific electrochemical potentials in acidic and alkaline electrolyte, respectively. Interestingly, the p-doping process proves reversible, with the c-MOF structure remaining stable across cyclic p-doping/de-doping. In contrast, the n-doping is irreversible, leading to the gradual decomposition of the framework into inorganic species over a few cycles. Drawing on these findings, we showcase the versatile electrochemical applications of c-MOFs and their derived composites, encompassing electrochemical energy storage, electrocatalysis, and ultrafast actuation. This study provides profound insights into the doping of c-MOFs, offering a new avenue for modulating their chemical and electronic structure, thereby broadening their potential for diverse electrochemical applications.

Prussian blue analogues of Ni-Co-MoS2 nanozymes with high peroxidase like activity for sensitive detection of glyphosate and copper

The rational development of efficient nanozymes for the colorimetric detection of targets is still challenging. Herein, Prussian blue analogues of Ni-Co-MoS2 nano boxes were fabricated for colorimetric detection of glyphosate and copper ions owing to its peroxidase like activity. At the sensing system, the Ni-Co-MoS2 nano boxes display high peroxidase activity, which could catalytically oxidize the colourless TMB to blue colour oxTMB. In presence of glyphosate in this sensing system the blue colour is diminished, ascribed to the inhibit the catalytic activity of Ni-Co-MoS2 nano boxes. Concurrently, the addition of copper ion, which result in blue colour was reappear due to the generation of glyphosate-copper complex formation. The Ni-Co-MoS2 nano boxes based colorimetric sensing platform was developed to sensitive detection of glyphosate and copper ions with low detection limit of 3 nM for glyphosate and 3.8 nM for copper. This method also displays satisfactory outcomes from real samples analysis and its good accuracy. Therefore, this work provides a great potential for rapid detection of the targets from the environments.

Oxidative stress and potential effects of metal nanoparticles: A review of biocompatibility and toxicity concerns

Metal nanoparticles (M-NPs) have garnered significant attention due to their unique properties, driving diverse applications across packaging, biomedicine, electronics, and environmental remediation. However, the potential health risks associated with M-NPs must not be disregarded. M-NPs' ability to accumulate in organs and traverse the blood-brain barrier poses potential health threats to animals, humans, and the environment. The interaction between M-NPs and various cellular components, including DNA, multiple proteins, and mitochondria, triggers the production of reactive oxygen species (ROS), influencing several cellular activities. These interactions have been linked to various effects, such as protein alterations, the buildup of M-NPs in the Golgi apparatus, heightened lysosomal hydrolases, mitochondrial dysfunction, apoptosis, cell membrane impairment, cytoplasmic disruption, and fluctuations in ATP levels. Despite the evident advantages M-NPs offer in diverse applications, gaps in understanding their biocompatibility and toxicity necessitate further research. This review provides an updated assessment of M-NPs' pros and cons across different applications, emphasizing associated hazards and potential toxicity. To ensure the responsible and safe use of M-NPs, comprehensive research is conducted to fully grasp the potential impact of these nanoparticles on both human health and the environment. By delving into their intricate interactions with biological systems, we can navigate the delicate balance between harnessing the benefits of M-NPs and minimizing potential risks. Further exploration will pave the way for informed decision-making, leading to the conscientious development of these nanomaterials and safeguarding the well-being of society and the environment.

Ordered Mesoporous Crystalline Frameworks Toward Promising Energy Applications

Ordered mesoporous crystalline frameworks (MCFs), which possess both functional frameworks and well-defined porosity, receive considerable attention because of their unique properties including high surface areas, large pore sizes, tailored porous structures, and compositions. Construction of novel crystalline mesoporous architectures that allows for rich accessible active sites and efficient mass transfer is envisaged to offer ample opportunities for potential energy-related applications. In this review, the rational synthesis, unique structures, and energy applications of MCFs are the main focus. After summarizing the synthetic approaches, an emphasis is placed on the delicate control of crystallites, mesophases, and nano-architectures by concluding basic principles and showing representative examples. Afterward, the currently fabricated components of MCFs such as metals, metal oxides, metal sulfides, and metal-organic frameworks are described in sequence. Further, typical applications of MCFs in rechargeable batteries, supercapacitors, electrocatalysis, and photocatalysis are highlighted. This review ends with the possible development and synthetic challenges of MCFs as well as a future prospect for high-efficiency energy applications, which underscores a pathway for developing advanced materials.

Hydrogen-Assisted Thermal Treatment of Electrode Materials for Electrochemical Double-Layer Capacitors

The capacitance of electrode materials used in electrochemical double-layer capacitors (EDLCs) is currently limited by several factors, including inaccessible isolated micropores in high-surface area carbons, the finite density of states resulting in a quantum capacitance in series to Helmholtz double-layer capacitance, and the presence of surface impurities, such as functional groups and adsorbed species. To unlock the full potential of EDLC active materials and corresponding electrodes, several post-production treatments are commonly proposed to improve their capacitance and, thus, the energy density of the corresponding devices. In this work, we report a systematic study of the effect of a prototypical treatment, namely H2-assisted thermal treatment, on the chemical, structural, and thermal properties of activated carbon and corresponding electrodes. By combining multiple characterization techniques, we clarify the actual origins of the improvement of the performance (e.g., > +35% energy density for the investigated power densities in the 0.5-45 kW kg-1 range) of the EDLCs based on treated electrodes compared to the case based on the pristine electrodes. Contrary to previous works supporting a questionable graphitization of the activated carbon at temperatures <1000 °C, we found that a "surface graphitization" of the activated carbon, detected by spectroscopic analysis, is mainly associated with the desorption of surface contaminants. The elimination of surface impurities, including adsorbed species, improves the surface capacitance of the activated carbon (CsurfAC) by +37.1 and +36.3% at specific currents of 1 and 10 A g-1, respectively. Despite the presence of slight densification of the activated carbon upon the thermal treatment, the latter still improves the cell gravimetric capacitance normalized on the mass of the activated carbon only (CgAC), e.g., + 28% at 1 A g-1. Besides, our holistic approach identifies the change in the active material and binder contents as a concomitant cause of the increase of cell gravimetric capacitance (Cg), accounting for the mass of all of the electrode materials measured for treated electrodes compared to pristine ones. Overall, this study provides new insights into the relationship between the modifications of the electrode materials induced by H2-assisted thermal treatments and the performance of the resulting EDLCs.

Surface reconstruction of RuO2/Co3O4 amorphous-crystalline heterointerface for efficient overall water splitting

The rational construction of amorphous-crystalline heterointerface can effectively improve the activity and stability of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, RuO2/Co3O4 (RCO) amorphous-crystalline heterointerface is prepared via oxidation method. The optimal RCO-10 exhibits low overpotentials of 57 and 231 mV for HER and OER at 10 mA cm-2, respectively. Experimental characterization and density functional theory (DFT) results show that the optimized electronic structure and surface reconstruction endow RCO-10 with excellent catalytic activity. DFT results show that electrons transfer from RuO2 to Co3O4 through the amorphous-crystalline heterointerface, achieving electron redistribution and moving the d-band center upward, which optimizes the adsorption free energy of the hydrogen reaction intermediate. Moreover, the reconstructed Ru/Co(OH)2 during the HER process has low hydrogen adsorption free energy to enhance HER activity. The reconstructed RuO2/CoOOH during the OER process has a low energy barrier for the elementary reaction (O*→*OOH) to enhance OER activity. Furthermore, RCO-10 requires only 1.50 V to drive 10 mA cm-2 and maintains stability over 200 h for overall water splitting. Meanwhile, RCO-10 displays stability for 48 h in alkaline solutions containing 0.5 M NaCl. The amorphous-crystalline heterointerface may bring new breakthroughs in the design of efficient and stable catalysts.

Structural Engineering of Anode Materials for Low-Temperature Lithium-Ion Batteries: Mechanisms, Strategies, and Prospects

The severe degradation of electrochemical performance for lithium-ion batteries (LIBs) at low temperatures poses a significant challenge to their practical applications. Consequently, extensive efforts have been contributed to explore novel anode materials with high electronic conductivity and rapid Li+ diffusion kinetics for achieving favorable low-temperature performance of LIBs. Herein, we try to review the recent reports on the synthesis and characterizations of low-temperature anode materials. First, we summarize the underlying mechanisms responsible for the performance degradation of anode materials at subzero temperatures. Second, detailed discussions concerning the key pathways (boosting electronic conductivity, enhancing Li+ diffusion kinetics, and inhibiting lithium dendrite) for improving the low-temperature performance of anode materials are presented. Third, several commonly used low-temperature anode materials are briefly introduced. Fourth, recent progress in the engineering of these low-temperature anode materials is summarized in terms of structural design, morphology control, surface & interface modifications, and multiphase materials. Finally, the challenges that remain to be solved in the field of low-temperature anode materials are discussed. This review was organized to offer valuable insights and guidance for next-generation LIBs with excellent low-temperature electrochemical performance.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

Stress-Relief Engineering in a N-Doped C-Modified Hierarchical Nanoporous Si Anode with a Microcurved Pore Wall Structure for Enhanced Lithium Storage

The commercialization of alloy-type anodes has been hindered by rapid capacity degradation due to volume fluctuations. To address this issue, stress-relief engineering is proposed for Si anodes that combines hierarchical nanoporous structures and modified layers, inspired by the phenomenon in which structures with continuous changes in curvature can reduce stress concentration. The N-doped C-modified hierarchical nanoporous Si anode with a microcurved pore wall (N-C@m-HNP Si) is prepared from inexpensive Mg-55Si alloys using a simple chemical etching and heat treatment process. When used as the anode for lithium-ion batteries, the N-C@m-HNP Si anode exhibits initial charge/discharge specific capacities of 1092.93 and 2636.32 mAh g-1 at 0.1 C (1 C = 3579 mA g-1), respectively, and a stable reversible specific capacity of 1071.84 mAh g-1 after 200 cycles. The synergy of the hierarchical porous structure with a microcurved pore wall and the N-doped C-modified layer effectively improves the electrochemical performance of N-C@m-HNP Si, and the effectiveness of stress-relief engineering is quantitatively analyzed through the theory of elastic bending of thin plates. Moreover, the formation process of Li15Si4 crystals, which causes substantial mechanical stress, is investigated using first-principles molecular dynamic simulations to reveal their tendency to occur at different scales. The results demonstrate that the hierarchical nanoporous structure helps to inhibit the transformation of amorphous LixSi into metastable Li15Si4 crystals during lithiation.

Unraveling the Role of Metal Vacancy Sites and Doped Nitrogen in Enhancing Pseudocapacitance Performance of Defective MXene

Nitrogen-doped titanium carbides (MXene) films exhibit extraordinary volumetric capacitance when high-concentration sulfuric acid electrolyte is utilized owing to the enhancement of pseudocapacitance. However, the energy storage mechanism of nitrogen-doped MXene is unclear due to the complex electrode structure and electrolyte ions' behavior. Here, based on pristine MXene (Ti3C2O2), three different MXene structures are constructed by introducing metal vacancy sites and doped nitrogen atoms, namely, defective MXene (Ti2.9C2O2), nitrogen-doped MXene (Ti3C2O1.9N0.1), and nitrogen-doped MXene with metal vacancy sites (Ti2.9C2O1.9N0.1). Then, the density functional theory (DFT)-based calculations coupled with the effective screening medium reference interaction site method (ESM-RISM) are applied to reveal the electrochemical behavior at the electrode/electrolyte interfacial area. Through analyzing the electronic structure, electrical double-layer capacitance (EDLC), and equilibrium potential of the pseudocapacitance reaction, the specific effect of structural changes on their performance can be clarified: metal vacancy sites can reduce the potential difference of gap layer (Outer Helmholtz plane) at charged state and increase the electronic capacity of Ti, which can be used to explain the high pseudocapacitance, low charge transfer resistance and high-rate capacity properties of nitrogen-doped MXene observed in experiments.

Building Block Metal Nanocluster-Based Growth in 1D Direction

Metal nanoclusters with precisely modulated structures at the nanoscale give us the opportunity to synthesize and investigate 1D nanomaterials at the atomic level. Herein, it realizes selective 1D growth of building block nanocluster "Au13 Cd2 " into three structurally different nanoclusters: "hand-in-hand" (Au13 Cd2 )2 O, "head-to-head" Au25 , and "shoulder-to-shoulder" Au33 . Detailed studies further reveals the growth mechanism and the growth-related tunable properties. This work provides new hints for the predictable structural transformation of nanoclusters and atomically precise construction of 1D nanomaterials.

Enabling Wasted A4 Papers as a Promising Carbon Source to Construct Partially Graphitic Hierarchical Porous Carbon for High-Performance Aqueous Zn-Ion Storage

Considering the superiorities of abundance, easy collection, low cost, and nearly constant composition, the wasted A4 papers are deemed as a recyclable and scalable carbon source to fabricate functional carbon materials for Zn-ion hybrid supercapacitors (ZIHSCs), which integrate the supercapacitors' high-power output and batteries' high energy density. Herein, the wasted A4 papers are efficiently converted into an advanced carbon material owning a hierarchical porous structure with a high surface area and interconnected multiscale channels, a graphitic structure, and a good level of N/O codoping. By taking advantage of these features, an express electron/ion transfer pathway, a large accessible surface interface, and a robust architecture are achieved for swift kinetics, numerous active sites, and excellent steadiness to afford a charming Zn2+ storage capability for the aqueous coin-type ZIHSC device (a high capacity of 244 mAh g-1 at 0.1 A g-1 with a capacity conservation of 116.4 mAh g-1 even amplifying the current density by 200 times, a supreme energy density of 190.4 Wh kg-1, a supreme power output of 18 kW kg-1, and an eminent durability of 93.8% over 10,000 cycles at 10 A g-1). Excitingly, the quasi-solid ZIHSC device also bespeaks an enjoyable capacity of 211.7 mAh g-1, a high energy density of 159.3 Wh kg-1, good mechanical flexibility, and a low self-discharge rate. This work puts forward a simple and scalable strategy to enable the wasted A4 paper as a competitive carbon source to construct advanced cathode material for Zn2+ storage.

In Situ Molecular Engineering Strategy to Construct Hierarchical MoS2 Double-Layer Nanotubes for Ultralong Lifespan "Rocking-Chair" Aqueous Zinc-Ion Batteries

Rechargeable aqueous zinc ion batteries (AZIBs) have gained considerable attention owing to their low cost and high safety, but dendrite growth, low plating/stripping efficiency, surface passivation, and self-erosion of the Zn metal anode are hindering their application. Herein, a one-step in situ molecular engineering strategy for the simultaneous construction of hierarchical MoS2 double-layer nanotubes (MoS2-DLTs) with expanded layer-spacing, oxygen doping, structural defects, and an abundant 1T-phase is proposed, which are designed as an intercalation-type anode for "rocking-chair" AZIBs, avoiding the Zn anode issues and therefore displaying a long cycling life. Benefiting from the structural optimization and molecular engineering, the Zn2+ diffusion efficiency and interface reaction kinetics of MoS2-DLTs are enhanced. When coupled with a homemade ZnMn2O4 cathode, the assembled MoS2-DLTs//ZnMn2O4 full battery exhibited impressive cycling stability with a capacity retention of 86.6% over 10 000 cycles under 1 A g-1anode, outperforming most of the reported "rocking-chair" AZIBs. The Zn2+/H+ cointercalation mechanism of MoS2-DLTs is investigated by synchrotron in situ powder X-ray diffraction and multiple ex situ characterizations. This research demonstrates the feasibility of MoS2 for Zn-storage anodes that can be used to construct reliable aqueous full batteries.

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic liquid electrolyte creates the hydrophobic tri-layer interface assembled by first two layers of hydrophobic OTF- and EMIM+ and third layer of loosely attached water, beyond the classical Gouy-Chapman-Stern theory based electrochemical double layer. By taking advantage of the hydrophobic tri-layer interface, the lean-water ionic liquid electrolyte enables a wide electrochemical working window (2.93 V) with relatively high zinc ion conductivity (17.3 mS/cm). Furthermore, the anion crowding interface facilitates the OTF- decomposition chemistry to create the mechanically graded solid electrolyte interface layer to simultaneously suppress the dendrite formation and maintain the mechanical stability. In this way, the lean-water based ionic liquid electrolyte realizes the ultralong cyclability of over 10000 cycles at 20 A/g and at practical condition of N/P ratio of 1.5, the cumulated areal capacity reach 1.8 Ah/cm2 , which outperforms the state-of-the-art zinc metal battery performance. Our work highlights the importance of the stable electrode/electrolyte interface stability, which would be practical for building high energy grid scale zinc-ion battery.

Insights into Nano- and Micro-Structured Scaffolds for Advanced Electrochemical Energy Storage

Adopting a nano- and micro-structuring approach to fully unleashing the genuine potential of electrode active material benefits in-depth understandings and research progress toward higher energy density electrochemical energy storage devices at all technology readiness levels. Due to various challenging issues, especially limited stability, nano- and micro-structured (NMS) electrodes undergo fast electrochemical performance degradation. The emerging NMS scaffold design is a pivotal aspect of many electrodes as it endows them with both robustness and electrochemical performance enhancement, even though it only occupies complementary and facilitating components for the main mechanism. However, extensive efforts are urgently needed toward optimizing the stereoscopic geometrical design of NMS scaffolds to minimize the volume ratio and maximize their functionality to fulfill the ever-increasing dependency and desire for energy power source supplies. This review will aim at highlighting these NMS scaffold design strategies, summarizing their corresponding strengths and challenges, and thereby outlining the potential solutions to resolve these challenges, design principles, and key perspectives for future research in this field. Therefore, this review will be one of the earliest reviews from this viewpoint.

Nanoscale polymer discs, toroids and platelets: a survey of their syntheses and potential applications

Polymer self-assembly has become a reliable and versatile workhorse to produce polymeric nanomaterials. With appropriate polymer design and monomer selection, polymers can assemble into shapes and morphologies beyond well-studied spherical and cylindrical micellar structures. Steadfast access to anisotropic polymer nanoparticles has meant that the fabrication and application of 2D soft matter has received increasing attention in recent years. In this review, we focus on nanoscale polymer discs, toroids, and platelets: three morphologies that are often interrelated and made from similar starting materials or common intermediates. For each morphology, we illustrate design rules, and group and discuss commonly used self-assembly strategies. We further highlight polymer compositions, fundamental principles and self-assembly conditions that enable precision in bottom-up fabrication strategies. Finally, we summarise potential applications of such nanomaterials, especially in the context of biomedical research and template chemistry and elaborate on future endeavours in this space.

Gradient Pores Enhance Charge Storage Density of Carbonaceous Cathodes for Zn-Ion Capacitor

Engineering carbonaceous cathode materials with adequately accessible active sites is crucial for unleashing their charge storage potential. Herein, activated meso-microporous shell carbon (MMSC-A) nanofibers are constructed to enhance the zinc ion storage density by forming a gradient-pore structure. A dominating pore size of 0.86 nm is tailored to cater for the solvated [Zn(H2 O)6 ]2+ . Moreover, these gradient porous nanofibers feature rapid ion/electron dual conduction pathways and offer abundant active surfaces with high affinity to electrolyte. When employed in Zn-ion capacitors (ZICs), the electrode delivers significantly enhanced capacity (257 mAh g-1 ), energy density (200 Wh kg-1 at 78 W kg-1 ), and cyclic stability (95% retention after 10 000 cycles) compared to nonactivated carbon nanofibers electrode. A series of in situ characterization techniques unveil that the improved Zn2+ storage capability stems from size compatibility between the pores and [Zn(H2 O)6 ]2+ , the co-adsorption of Zn2+ , H+ , and SO4 2- , as well as reversible surface chemical interaction. This work presents an effective method to engineering meso-microporous carbon materials toward high energy-density storage, and also offers insights into the Zn2+ storage mechanism in such gradient-pore structures.

Nanofiber-Reinforced Composite Gel Enabling High Ionic Conductivity and Ultralong Cycle Life for Zn Ion Batteries

Despite the impressive merits of gel electrolytes for aqueous Zn-ion batteries, it remains a significant challenge to design and develop the gel electrolyte with high ionic conductivity, excellent dimensional stability, and long cycle life. Herein, a composite electrolyte (PTP) with thermolastic polyurethane -poly(m-phenylene isophthalamide)  nanofiber-reinforced polyvinyl alcohol gel strategy is proposed for highly reversible Zn plating/stripping. Mechanically robust and ultrathin PTP contains functional groups for building ion migration channels and immobilizing water molecules, which accelerates Zn2+ migration and mitigates water-related side reactions. Thus, the Zn anodes exhibit excellent electrochemical performance involving high cycling stability (6500 h at 5 mA cm-2 , 5 mA h cm-2 ) and achieving an exceptional cumulative capacity of more than 16 000 mA h cm-2 . This enhancement is well maintained when combined with MnO2 cathode. This work provides a reasonable solution for stabilizing Zn anodes and also provides new ideas for the modification of nanofiber-reinforced gel electrolytes.

Modulation of excited state intramolecular proton transfer and intramolecular charge transfer pathways of symmetrical azines through micellar medium

The photophysical studies of fluorescent probes in micellar medium can give a better insight about their interaction with biological membranes. This study attempts to access the photophysical properties of the dual emitting azine based probe diethylamino salicylidene azine dimer (DEASAD) in micellar media. DEASAD showed dual charge transfer emission due to the presence of open enol (480 nm) and closed enol (510 nm) forms in polar protic solvents. Upon increasing the concentration of ionic surfactants, there is a significant increase in the emission intensity of both the enol forms of DEASAD until premicellar concentration. After micellization, occurrence of a new anomalous keto form emission through excited state intramolecular proton transfer (ESIPT) was observed around 530 nm in ionic micelles and its intensity changes depend on the micellar surface charge. The emission studies revealed the position and interaction of DEASAD with the charge of micellar stern layer as confirmed through interaction of metal ion with the probe and control molecules with and without ESIPT and ICT moieties. In contrast, the new anomalous longer wavelength keto form of DEASAD emission was absent in neutral micelles like Triton X-100.

Structural, Electronic and Vibrational Properties of B24N24 Nanocapsules: Novel Anodes for Magnesium Batteries

We report on DFT-TDDFT studies of the structural, electronic and vibrational properties of B24N24 nanocapsules and the effect of encapsulation of homonuclear diatomic halogens (Cl2, Br2 and I2) and chalcogens (S2 and Se2) on the interaction of the B24N24 nanocapsules with the divalent magnesium cation. In particular, to foretell whether these BN nanostructures could be proper negative electrodes for magnesium-ion batteries, the structural, vibrational and electronic properties, as well as the interaction energy and the cell voltage, which is important for applications, have been computed for each system, highlighting their differences and similarities. The encapsulation of halogen and chalcogen diatomic molecules increases the cell voltage, with an effect enhanced down groups 16 and 17 of the periodic table, leading to better performing anodes and fulfilling a remarkable cell voltage of 3.61 V for the iodine-encapsulated system.

Superspreading-Based Fabrication of Thermostable Nanoporous Polyimide Membranes for High Safety Separators of Lithium-Ion Batteries

The development of thermally stable separators is a promising approach to address the safety issues of lithium-ion batteries (LIBs) owing to the serious shrinkage of commercial polyolefin separators at elevated temperatures. However, achieving controlled nanopores with a uniform size distribution in thermostable polymeric separators and high electrochemical performance is still a great challenge. In this study, nanoporous polyimide (PI) membranes with excellent thermal stability as high-safety separators is developed for LIBs using a superspreading strategy. The superspreading of polyamic acid solutions enables the generation of thin and uniform liquid layers, facilitating the formation of thin PI membranes with controllable and uniform nanopores with narrow size distribution ranging from 121 ± 5 nm to 86 ± 6 nm. Such nanoporous PI membranes display excellent structural stability at elevated temperatures up to 300 °C for at least 1 h. LIBs assembled with nanoporous PI membranes as separators show high specific capacity and Coulombic efficiency and can work normally after transient treatment at a high temperature (150 °C for 20 min) and high ambient temperature, indicating their promising application as high-safety separators for rechargeable batteries.

Design of Photothermal "Ion Pumps" for Achieving Energy-Efficient, Augmented, and Durable Lithium Extraction from Seawater

Extracting lithium from seawater has emerged as a disruptive platform to resolve the issue of an ever-growing lithium shortage. However, achieving highly efficient and durable lithium extraction from seawater in an energy-efficient manner is challenging, as imposed by the low concentration of lithium ions (Li+) and high concentration of interfering ions in seawater. Here, we report a facile and universal strategy to develop photothermal "ion pumps" (PIPs) that allow achieving energy-efficient, augmented, and durable lithium extraction from seawater under sunlight. The key design of PIPs lies in the function fusion and spatial configuration manipulation of a hydrophilic Li+-trapping nanofibrous core and a hydrophobic photothermal shell for governing gravity-driven water flow and solar-driven water evaporation. Such a synergetic effect allows PIPs to achieve spontaneous, continuous, and augmented Li+ replenishment-diffusion-enrichment, as well as circumvent the impact of concentration polarization and scaling of interfering ions. We demonstrate that our PIPs exhibit dramatic enhancement in Li+ trapping rate and outstanding Li+ separation factor yet have ultralow energy consumption. Moreover, our PIPs deliver ultrastable Li+ trapping performance without scaling even under high-concentration interfering ions for 140 h operation, as opposed to the significant decrease of nearly 55.6% in conventional photothermal configuration. The design concept and material toolkit developed in this work can also find applications in extracting high-value-added resources from seawater and beyond.

In Situ Constructing Ultrafast Ion Channel for Promoting High-Rate Cycle Stability of Nano-Na3V2(PO4)3 Cathode

Encapsulating nanomaterials in carbon is one of the main ways to increase the cathode stability, but it is difficult to simultaneously optimize the rate capacity and enhance durability derived from the insufficient ion transport channels and deficient ion adsorption sites that constipate the ion transport and pseudocapacitive reaction. Herein, we develop the ligand-confined growth strategy to encapsulate the nano-Na3V2(PO4)3 cathode material in various carbon channels (microporous, mesoporous, and macroporous) to discriminate the optimal carbon channels for synchronously improving rate capacity and holding the high-rate cycle stability. Benefiting from the unobstructed ion/charge transport channels and flexible maskant created by the interconnected mesoporous carbon channels, the prepared Na3V2(PO4)3 nanoparticles confined in mesoporous carbon channel (Mes-NVP/C) achieve a discharge-specific capacity of 70 mAh g-1 even at the ultrahigh rate of 100 C, higher than those of the Na3V2(PO4)3 nanoparticles confined in microporous and macroporous carbon channel (Micr-NVP/C and Macr-NVP/C), respectively. Significantly, the capacity retention rate of Mes-NVP/C after 5000 cycles at 20 C is as high as 90.48%, exceeding most of the reported work. These findings hold great promise for traditional cathode materials to synergistically realize fast charging ability and long cycle life.

Pd8 Nanocluster with Nonmetal-to-Metal- Ring Coordination and Promising Photothermal Conversion Efficiency

Constructing ambient-stable, single-atom-layered metal-based materials with atomic precision and understanding their underlying stability mechanisms are challenging. Here, stable single-atom-layered nanoclusters of Pd were synthesized and precisely characterized through electrospray ionization mass spectrometry and single-crystal X-ray crystallography. A pseudo-pentalene-like Pd8 unit was found in the nanocluster, interacting with two syn PPh units through nonmetal-to-metal -ring coordination. The unexpected coordination, which is distinctly different from the typical organoring-to-metal coordination in half-sandwich-type organometallic compounds, contributes to the ambient stability of the as-obtained single-atom-layered nanocluster as revealed through theoretical and experimental analyses. Furthermore, quantum chemical calculations revealed dominant electron transition along the horizontal x-direction of the Pd8 plane, indicating high photothermal conversion efficiency (PCE) of the nanocluster, which was verified by the experimental PCE of 73.3 %. Therefore, this study unveils the birth of a novel type of compound and the finding of the unusual nonmetal-to-metal -ring coordination and has important implications for future syntheses, structures, properties, and structure-property correlations of single-atom-layered metal-based materials.

Urchin-like Ce(HCOO)3 Synthesized by a Microwave-Assisted Method and Its Application in an Asymmetric Supercapacitor

In this work, a series of urchin-like Ce(HCOO)3 nanoclusters were synthesized via a facile and scalable microwave-assisted method by varying the irradiation time, and the structure-property relationship was investigated. The optimization of the reaction time was performed based on structural characterizations and electrochemical performances, and the Ce(HCOO)3-210 s sample shows a specific capacitance as high as 132 F g-1 at a current density of 1 A g-1. This is due to the optimal mesoporous hierarchical structure and crystallinity that are beneficial to its conductivity, offering abundant Ce3+/Ce4+ active sites and facilitating the transportation of electrolyte ions. Moreover, an asymmetric supercapacitor based on Ce(HCOO)3//AC was fabricated, which delivers a maximum energy density of 14.78 Wh kg-1 and a considerably high power density of 15,168 W kg-1. After 10,000 continuous charge-discharge cycles at 3 A g-1, the ASC device retains 81.3% of its initial specific capacitance. The excellent comprehensive electrochemical performance of this urchin-like Ce(HCOO)3 offers significant promise for practical supercapacitor applications.

SiSe2 for Superior Sulfide Solid Electrolytes and Li-Ion Batteries

Among the various existing layered compounds, silicon diselenide (SiSe2) possesses diverse chemical and physical properties, owing to its large interlayer spacing and interesting atomic arrangements. Despite the unique properties of layered SiSe2, it has not yet been used in energy applications. Herein, we introduce the synthesis of layered SiSe2 through a facile solid-state synthetic route and demonstrate its versatility as a sulfide solid electrolyte (SE) additive for all-solid-state batteries (ASSBs) and as an anode material for Li-ion batteries (LIBs). Li-argyrodites with various compositions substituted with SiSe2 are synthesized and evaluated as sulfide SEs for ASSBs. SiSe2-substituted Li-argyrodites exhibit high ionic conductivities, low activation energies, and high air stabilities. In addition, when using a sulfide SE, the ASSB full cell exhibits a high discharge/charge capacity of 202/169 mAh g-1 with a high initial Coulombic efficiency (ICE) of 83.7% and stable capacity retention at 1C after 100 cycles. Furthermore, the Li-storage properties of SiSe2 as an anode material for LIBs are evaluated, and its Li-pathway mechanism is explored by using various cutting-edge ex situ analytical tools. Moreover, the SiSe2 nanocomposite anode exhibits a high Li- insertion/extraction capacity of 950/775 mAh g-1, a high ICE of 81.6%, a fast rate capability, and stable capacity retention after 300 cycles. Accordingly, layered SiSe2 and its versatile applications as a sulfide SE additive for ASSBs and an anode material for LIBs are promising candidates in energy storage applications as well as myriad other applications.

Room-Temperature Salt Template Synthesis of Nitrogen-Doped 3D Porous Carbon for Fast Metal-Ion Storage

The water-soluble salt-template technique holds great promise for fabricating 3D porous materials. However, an equipment-free and pore-size controllable synthetic approach employing salt-template precursors at room temperature has remained unexplored. Herein, we introduce a green room-temperature antisolvent precipitation strategy for creating salt-template self-assembly precursors to universally produce 3D porous materials with controllable pore size. Through a combination of theoretical simulations and advanced characterization techniques, we unveil the antisolvent precipitation mechanism and provide guidelines for selecting raw materials and controlling the size of precipitated salt. Following the calcination and washing steps, we achieve large-scale and universal production of 3D porous materials and the recycling of the salt templates and antisolvents. The optimized nitrogen-doped 3D porous carbon (N-3DPC) materials demonstrate distinctive structural benefits, facilitating a high capacity for potassium-ion storage along with exceptional reversibility. This is further supported by in situ electrochemical impedance spectra, in situ Raman spectroscopy, and theoretical calculations. The anode shows a high rate capacity of 181 mAh g-1 at 4 A g-1 in the full cell. This study addresses the knowledge gap concerning the room-temperature synthesis of salt-template self-assembly precursors for the large-scale production of porous materials, thereby expanding their potential applications for electrochemical energy conversion and storage.

Alkali-Ion Batteries by Carbon Encapsulation of Liquid Metal Anode

Gallium-based metallic liquids, exhibiting high theoretical capacity, are considered a promising anode material for room-temperature liquid metal alkali-ion batteries. However, electrochemical performances, especially the cyclic stability, of the liquid metal anode for alkali-ion batteries are strongly limited because of the volume expansion and unstable solid electrolyte interphase film of liquid metal. Here, the bottleneck problem is resolved by designing carbon encapsulation on gallium-indium liquid metal nanoparticles (EGaIn@C LMNPs). A superior cycling stability (644 mAh g-1 after 800 cycles at 1.0 A g-1 ) is demonstrated for lithium-ion batteries, and excellent cycle stability (87 mAh g-1 after 2500 cycles at 1.0 A g-1 ) is achieved for sodium-ion batteries by carbon encapsulation of the liquid metal anode. Morphological and phase changes of EGaIn@C LMNPs during the electrochemical reaction process are revealed by in situ transmission electron microscopy measurements in real-time. The origin for the excellent performance is uncovered, that is the EGaIn@C core-shell structure effectively suppresses the non-uniform volume expansion of LMNPs from ≈160% to 127%, improves the electrical conductivity of the LMNPs, and exhibits superior electrochemical kinetics and a self-healing phenomenon. This work paves the way for the applications of room-temperature liquid metal anodes for high-performance alkali-ion batteries.

Challenges and Advances in Rechargeable Batteries for Extreme-Condition Applications

Rechargeable batteries are widely used as power sources for portable electronics, electric vehicles and smart grids. Their practical performances are, however, largely undermined under extreme conditions, such as in high-altitude drones, ocean exploration and polar expedition. These extreme environmental conditions not only bring new challenges for batteries but also incur unique battery failure mechanisms. To fill in the gap, it is of great importance to understand the battery failure mechanisms under different extreme conditions and figure out the key parameters that limit battery performances. In this review, the authors start by investigating the key challenges from the viewpoints of ionic/charge transfer, material/interface evolution and electrolyte degradation under different extreme conditions. This is followed by different engineering approaches through electrode materials design, electrolyte modification and battery component optimization to enhance practical battery performances. Finally, a short perspective is provided about the future development of rechargeable batteries under extreme conditions.

Harvesting Inertial Energy and Powering Wearable Devices: A Review

Amidst the swift progression of microelectronics and Internet of Things technology, wearable devices are gradually gaining ground in the domains of human health monitoring. Recently, human bioenergy harvesting has emerged as a plausible alternative to batteries. This paper delves into harvesting human inertial energy that stimulates inertial masses through human motion and then transmutes the motion of the inertial masses into electrical energy. The inertial energy harvester is better suited for low-frequency and irregular human motion. This review first identifies the sources of human motion excitation that are compatible with inertial energy harvesters and then provides a summary of the operating principles and the comparisons of the commonly used energy conversion mechanisms, including electromagnetic, piezoelectric, and triboelectric transducers. The review thoroughly summarizes the latest advancements in human inertial energy-harvesting technology that are categorized and grouped based on their excitation sources and mechanical modulation methods. In addition, the review outlines the applications of inertial energy harvesters in powering wearable devices, medical health monitoring, and as mobile power sources. Finally, the challenges faced by inertial energy-harvesting technologies are discussed, and the review provides a perspective on the potential developments in the field.

Complex Materials with Stochastic Structural Patterns: Spiky Colloids with Enhanced Charge Storage Capacity

Self-assembled materials with complex nanoscale and mesoscale architecture attract considerable attention in energy and sustainability technologies. Their high performance can be attributed to high surface area, quantum effects, and hierarchical organization. Delineation of these contributions is, however, difficult because complex materials display stochastic structural patterns combining both order and disorder, which is difficult to be consistently reproduced yet being important for materials' functionality. Their compositional variability make systematic studies even harder. Here, a model system of FeSe2 "hedgehog" particles (HPs) was selected  to gain insight into the mechanisms of charge storage n complex nanostructured materials common for batteries and supercapacitors. Specifically, HPs represent self-assembled biomimetic nanomaterials with a medium level of complexity; they display an organizational pattern of spiky colloids with considerable disorder yet non-random; this patternt is consistently reproduced from particle to particle. . It was found that HPs can accommodate ≈70× greater charge density than spheroidal nano- and microparticles. Besides expanded surface area, the enhanced charge storage capacity was enabled by improved hole transport and reversible atomic conformations of FeSe2 layers in the blade-like spikes associated with the rotatory motion of the Se atoms around Fe center. The dispersibility of HPs also enables their easy integration into energy storage devices. HPs quadruple stored electrochemical energy and double the storage modulus of structural supercapacitors.