Brillouin optical microscopy for corneal biomechanics

Exploiting Matrix Stiffness to Overcome Drug Resistance

Drug resistance is arguably one of the biggest challenges facing cancer research today. Understanding the underlying mechanisms of drug resistance in tumor progression and metastasis are essential in developing better treatment modalities. Given the matrix stiffness affecting the mechanotransduction capabilities of cancer cells, characterization of the related signal transduction pathways can provide a better understanding for developing novel therapeutic strategies. In this review, we aimed to summarize the recent advancements in tumor matrix biology in parallel to therapeutic approaches targeting matrix stiffness and its consequences in cellular processes in tumor progression and metastasis. The cellular processes governed by signal transduction pathways and their aberrant activation may result in activating the epithelial-to-mesenchymal transition, cancer stemness, and autophagy, which can be attributed to drug resistance. Developing therapeutic strategies to target these cellular processes in cancer biology will offer novel therapeutic approaches to tailor better personalized treatment modalities for clinical studies.

Research progress on measurement methods and clinical applications of corneal elastic modulus

Various corneal diseases are strongly associated with corneal biomechanical characteristics, and early measurement of patients' corneal biomechanics can be utilized in their diagnosis and treatment. Measurement methods for corneal biomechanical characteristics are classified into ex vivo and in vivo. Some of these methods can directly measure certain corneal biomechanical parameters, while others require indirect calculation through alternative methods. However, due to diversities in measurement techniques and environmental conditions, significant differences may exist in the corneal mechanical properties measured by these two methods. Therefore, comprehensive research on current measurement methods and the exploration of novel measurement techniques may have great clinical significance. The corneal elastic modulus, a critical indicator in corneal biomechanics, reflects the cornea's ability to return to its initial shape after undergoing stress. This review aims to provide a comprehensive summary of the corneal elastic modulus, which is a critical biomechanical parameter, and discuss its direct, indirect, and potential measurement methods and clinical applications.

Brillouin Biosensing of Viscoelasticity across Phase Transitions in Ovine Cornea

Noninvasive in situ monitoring of viscoelastic characteristics of corneal tissue at elevated temperatures is pivotal for mechanical property-informed refractive surgery techniques, including thermokeratoplasty and photorefractive keratectomy, requiring precise thermal modifications of the corneal structure during these surgical procedures. This study harnesses Brillouin light scattering spectroscopy as a biosensing platform to noninvasively probe the viscoelastic properties of ovine corneas across a temperature range of 25-64 °C. By submerging the tissue samples in silicone oil, consistent hydration and immiscibility are maintained, allowing for their accurate sensing of temperature-dependent mechanical behaviors. We identify significant phase transitions in the corneal tissue, particularly beyond 40 °C, likely due to collagen unfolding, marking the beginning of thermal destabilization. A subsequent transition, observed beyond 60 °C, correlates with collagen denaturation. These phase transformations highlight the cornea's sensitivity to both physiologically reversible and irreversible viscoelastic changes induced by mild to high temperatures. Our findings underscore the potential of the Brillouin biosensing technique for real-time diagnostics of corneal biomechanics during refractive surgeries to attain optimized therapeutic outcomes.

The Utilization of Brillouin Microscopy in Corneal Diagnostics: A Systematic Review

Corneal biomechanical data has been used since 2005 to screen for keratoconus and corneal ectasia by corneal specialists. Older technology uses force applanation techniques over a 3 mm area in the central cornea, making it highly dependent on extraneous variables and unable to calculate the elasticity of the tissue. Brillouin microscopy is a newer method that uses a natural shift in the frequency of light as it passes through a material. This frequency shift can be used to estimate the viscoelasticity of the tissue. The advantage of Brillouin microscopy is that it can create a full three-dimensional (3D) map of the entire cornea without direct contact. A literature search was conducted using the databases PubMed, Google Scholar, and Ovid regarding the applications of Brillouin microscopy in corneal diagnostics. A final total of 16 articles was included describing the various ex vivo and in vivo studies conducted using Brillouin microscopy. Applications of this technology spanned from keratoconus diagnosis to post-corneal refractive surgery evaluation. All studies evaluated corneal biomechanics and other corneal properties through the quantification of Brillouin frequency shifts. Many of the studies found that this diagnostic device is capable of detecting subtle changes in corneal thickness and biomechanics in keratoconic corneas at a high level of specificity and sensitivity. However, limitations of Brillouin microscopy may include the duration of time required for use and fluctuations in accuracy depending on the corneal hydration state. Future technology seems to be geared toward a combination of optical coherence tomography (OCT) and Brillouin microscopy, using OCT as a three-dimensional pupil-tracking modality. Further research and understanding of the technology involved will lead to better care of patients in the field of ophthalmology.

Implantation of Intracorneal Ring Segments in Keratectasia: Effects on Corneal Biomechanics in 112 Eyes

PURPOSE

The aim of this study was to analyze changes in corneal biomechanical properties after implantation of intracorneal ring segments (ICRSs) in keratectasia.

METHODS

This retrospective single-center study included 112 patient eyes that underwent femtosecond laser-assisted ICRS implantation (Intacs SK; Addition Technology Inc, Des Plaines, IL) for keratectasia. Biomechanical analysis was performed using the Ocular Response Analyzer (ORA; Reichert Inc, Depew, NY), with determination of corneal resistance factor, corneal hysteresis, and Keratoconus Match Index, as well as by Corvis ST (OCULUS, Wetzlar, Germany), with determination of stiffness parameter A1, Ambrosio relational thickness to the horizontal profile (Arth), integrated radius, deformation amplitude ratio, and stress-strain index as well as Corvis Biomechanical Index and Tomographic Biomechanical Index. Data collection was performed preoperatively and 6 months postoperatively for ORA and Corvis ST and additionally after 1 and 2 years for ORA.

RESULTS

The corneal resistance factor decreased significantly postoperatively (5.8 ± 1.7 mm Hg) compared with preoperatively (6.75 ± 3.7 mm Hg; P = 0.021) and increased again during follow-up (6.2 ± 1.9 mm Hg; P = 0.024), without regaining preoperative values. Corneal hysteresis and Keratoconus Match Index did not change significantly. Stiffness parameter A1 ( P = 0.045) increased significantly after ICRS implantation and Arth decreased significantly from 181 ± 85 to 150 ± 92 ( P = 0.016). However, there was no significant postoperative change for others Corvis parameters.

CONCLUSIONS

Corneal biomechanical properties showed inconsistent changes after ICRS implantation. Classical corneal biomechanical parameters (using single central air-puff tonometers) do not seem to be suitable for follow-up after ICRS implantation.

Spatial mapping of corneal biomechanical properties using wave-based optical coherence elastography

Quantifying the mechanical properties of the cornea can provide valuable insights into the occurrence and progression of keratoconus, as well as the effectiveness of corneal crosslinking surgery. This study presents a non-contact and non-invasive wave-based optical coherence elastography system that utilizes air-pulse stimulation to create a two-dimensional map of corneal elasticity. Homogeneous and dual concentration phantoms were measured with the sampling of 25 × 25 points over a 6.6 × 6.6 mm2 area, to verify the measurement capability for elastic mapping and the spatial resolution (0.91 mm). The velocity of elastic waves distribution of porcine corneas before and after corneal crosslinking surgery were further mapped, showing a significant change in biomechanics in crosslinked region. This system features non-invasiveness and high resolution, holding great potential for application in ophthalmic clinics.

Investigation of mechanical strength and structure of corneal graft-host junction

Dehiscence is a common complication of corneal transplant surgery involving separating the graft from the host eye. The present article aims to investigate fundamental insights into the mechanical and structural aspects of the graft-host junction (GHJ) of a graft that survived in a patient for 13 years after penetrating keratoplasty (PK). Additionally, it adopts the sutur retention strength (SRS) test procedure defined in ISO:7198-2016 and aims to provide a comprehensive test protocol to study the biomechanics of the GHJ in extracted PK buttons. A 9 mm corneal button with GHJ was extracted from a 46-year-old patient who underwent PK 13 years back. The strength of the GHJ was quantified using the SRS test. Corresponding control results were obtained from the SRS tests of a corneoscleral button with no history of any refractive procedure. Birefringence, histological, and scanning electron microscopy (SEM) imaging were used to visualize the microstructural details of the GHJ. The strength of the GHJ was observed to be ten times lower than the native cornea. Histopathological features, such as fragmented Bowman's layer, and fibrosis with a clear demarcation line between host and graft tissue, were observed at the GHJ, suggesting a weak bond across the GHJ. The low strength of the GHJ in PK indicates the high susceptibility of the GHJ towards wound dehiscence.

Tunable Macroscopic Alignment of Self-Assembling Peptide Nanofibers

Progress in the design and synthesis of nanostructured self-assembling systems has facilitated the realization of numerous nanoscale geometries, including fibers, ribbons, and sheets. A key challenge has been achieving control across multiple length scales and creating macroscopic structures with nanoscale organization. Here, we present a facile extrusion-based fabrication method to produce anisotropic, nanofibrous hydrogels using self-assembling peptides. The application of shear force coinciding with ion-triggered gelation is used to kinetically trap supramolecular nanofibers into aligned, hierarchical macrostructures. Further, we demonstrate the ability to tune the nanostructure of macroscopic hydrogels through modulating phosphate buffer concentration during peptide self-assembly. In addition, increases in the nanostructural anisotropy of fabricated hydrogels are found to enhance their strength and stiffness under hydrated conditions. To demonstrate their utility as an extracellular matrix-mimetic biomaterial, aligned nanofibrous hydrogels are used to guide directional spreading of multiple cell types, but strikingly, increased matrix alignment is not always correlated with increased cellular alignment. Nanoscale observations reveal differences in cell-matrix interactions between variably aligned scaffolds and implicate the need for mechanical coupling for cells to understand nanofibrous alignment cues. In total, innovations in the supramolecular engineering of self-assembling peptides allow us to decouple nanostructure from macrostructure and generate a gradient of anisotropic nanofibrous hydrogels. We anticipate that control of architecture at multiple length scales will be critical for a variety of applications, including the bottom-up tissue engineering explored here.

New forays into measurement of ocular biomechanics

PURPOSE OF REVIEW

The field of corneal biomechanics has rapidly progressed in recent years, reflecting technological advances and an increased understanding of the clinical significance of measuring these properties. This review will evaluate in-vivo biomechanical properties obtained by current technologies and compare them regarding their relevance to established biomechanical properties obtained by gold-standard ex-vivo techniques normally conducted on elastic materials.

RECENT FINDINGS

Several new technologies have appeared in recent years, including vibrational optical coherence tomography (VOCT) and the corneal indentation device (CID). These techniques provide promising new opportunities for minimally invasive and accurate measurements of corneal viscoelastic properties.

SUMMARY

Alterations in corneal biomechanics are known to occur in several corneal degenerative diseases and after refractive surgical procedures. The measurement of corneal biomechanical properties has the capability to diagnose early disease and monitor corneal disease progression. Several new technologies have emerged in recent years, allowing for more accurate and less invasive measurements of corneal biomechanical properties, most notably the elastic modulus.

Corneal biomechanics and diagnostics: a review

PURPOSE

Corneal biomechanics is an emerging field and the interest into physical and biological interrelations in the anterior part of the eye has significantly increased during the past years. There are many factors that determine corneal biomechanics such as hormonal fluctuations, hydration and environmental factors. Other factors that can affect the corneas are the age, the intraocular pressure and the central corneal thickness. The purpose of this review is to evaluate the factors affecting corneal biomechanics and the recent advancements in non-destructive, in vivo measurement techniques for early detection and improved management of corneal diseases.

METHODS

Until recently, corneal biomechanics could not be directly assessed in humans and were instead inferred from geometrical cornea analysis and ex vivo biomechanical testing. The current research has made strides in studying and creating non-destructive and contactless techniques to measure the biomechanical properties of the cornea in vivo.

RESULTS

Research has indicated that altered corneal biomechanics contribute to diseases such as keratoconus and glaucoma. The identification of pathological corneas through the new measurement techniques is imperative for preventing postoperative complications.

CONCLUSIONS

Identification of pathological corneas is crucial for the prevention of postoperative complications. Therefore, a better understanding of corneal biomechanics will lead to earlier diagnosis of ectatic disorders, improve current refractive surgeries and allow for a better postoperative treatment.

Macrophage mediated mesoscale brain mechanical homeostasis mechanically imaged via optical tweezers and Brillouin microscopy in vivo

Tissues are active materials where epithelial turnover, immune surveillance, and remodeling of stromal cells such as macrophages all regulate form and function. Scattering modalities such as Brillouin microscopy (BM) can non-invasively access mechanical signatures at GHz. However, our traditional understanding of tissue material properties is derived mainly from modalities which probe mechanical properties at different frequencies. Thus, reconciling measurements amongst these modalities remains an active area. Here, we compare optical tweezer active microrheology (OT-AMR) and Brillouin microscopy (BM) to longitudinally map brain development in the larval zebrafish. We determine that each measurement is able to detect a mechanical signature linked to functional units of the brain. We demonstrate that the corrected BM-Longitudinal modulus using a density factor correlates well with OT-AMR storage modulus at lower frequencies. We also show that the brain tissue mechanical properties are dependent on both the neuronal architecture and the presence of macrophages. Moreover, the BM technique is able to delineate the contributions to mechanical properties of the macrophage from that due to colony stimulating factor 1 receptor (CSF1R) mediated stromal remodeling. Here, our data suggest that macrophage remodeling is instrumental in the maintenance of tissue mechanical homeostasis during development. Moreover, the strong agreement between the OT-AM and BM further demonstrates that scattering-based technique is sensitive to both large and minute structural modification in vivo.

Subclinical Keratoconus Detection and Characterization Using Motion-Tracking Brillouin Microscopy

PURPOSE

To characterize focal biomechanical alterations in subclinical keratoconus (SKC) using motion-tracking (MT) Brillouin microscopy and evaluate the ability of MT Brillouin metrics to differentiate eyes with SKC from normal control eyes.

DESIGN

Prospective cross-sectional study.

PARTICIPANTS

Thirty eyes from 30 patients were evaluated, including 15 eyes from 15 bilaterally normal patients and 15 eyes with SKC from 15 patients.

METHODS

All patients underwent Scheimpflug tomography and MT Brillouin microscopy using a custom-built device. Mean and minimum MT Brillouin values within the anterior plateau region and anterior 150 μm were generated. Scheimpflug metrics evaluated included inferior-superior (IS) value, maximum keratometry (Kmax), thinnest corneal thickness, asymmetry indices, Belin/Ambrosio display total deviation, and Ambrosio relational thickness. Receiver operating characteristic (ROC) curves were generated for all Scheimpflug and MT Brillouin metrics evaluated to determine the area under the ROC curve (AUC), sensitivity, and specificity for each variable.

MAIN OUTCOME MEASURES

Discriminative performance based on AUC, sensitivity, and specificity.

RESULTS

No significant differences were found between groups for age, sex, manifest refraction spherical equivalent, corrected distance visual acuity, Kmax, or KISA% index. Among Scheimpflug metrics, significant differences were found between groups for thinnest corneal thickness (556 μm vs. 522 μm; P < 0.001), IS value (0.29 diopter [D] vs. 1.05 D; P < 0.001), index of vertical asymmetry (IVA; 0.10 vs. 0.19; P < 0.001), and keratoconus index (1.01 vs. 1.05; P < 0.001), and no significant differences were found for any other Scheimpflug metric. Among MT Brillouin metrics, clear differences were found between control eyes and eyes with SKC for mean plateau (5.71 GHz vs. 5.68 GHz; P < 0.0001), minimum plateau (5.69 GHz vs. 5.65 GHz; P < 0.0001), mean anterior 150 μm (5.72 GHz vs. 5.68 GHz; P < 0.0001), and minimum anterior 150 μm (5.70 GHz vs. 5.66 GHz; P < 0.001). All MT Brillouin plateau and anterior 150 μm mean and minimum metrics fully differentiated groups (AUC, 1.0 for each), whereas the best performing Scheimpflug metrics were keratoconus index (AUC, 0.91), IS value (AUC, 0.89), and IVA (AUC, 0.88).

CONCLUSIONS

Motion-tracking Brillouin microscopy metrics effectively characterize focal corneal biomechanical alterations in eyes with SKC and clearly differentiated these eyes from control eyes, including eyes that were not differentiated accurately using Scheimpflug metrics.

FINANCIAL DISCLOSURE(S)

Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

Accuracy of an Air-Puff Dynamic Tonometry Biomarker to Discriminate the Corneal Biomechanical Response in Patients With Keratoconus

PURPOSE

The aim of this study was to assess accuracy of the mean corneal stiffness ( kc , N/m) parameter to discriminate between patients with keratoconus and age-matched healthy subjects.

METHODS

Dynamic Scheimpflug imaging tonometry was performed with Corvis ST (Oculus Optikgeräte GmbH, Germany) in patients with keratoconus (n = 24; study group) and age-matched healthy subjects (n = 32; control). An image processing algorithm was developed to analyze the video sequence of the Corvis ST air-puff event and to determine the geometric and temporal parameters that correlated with the corneal tissue biomechanical properties. A modified 3-element viscoelastic model was used to derive the kc parameter, which represented the corneal tissue resistance to deformation under load. Receiver operating characteristic curves were used to assess the overall diagnostic performance for determining the area under the curve, sensitivity, and specificity of the kc in assessing the corneal tissue deformation to the Corvis ST air-puff event in keratoconus and control eyes. The Corvis Biomechanical Index ( CBI ) was analyzed for external validation.

RESULTS

The kc parameter was significantly different between keratoconus and controls ( P < 0.001), ranging from 24.9 ±3.0 to 34.2 ±3.5 N/m, respectively. It was highly correlated with CBI (r = -0.69; P < 0.001); however, the kc parameter had greater specificity (94%) than CBI (75%), whereas the 2 biomarkers had similar area under the curve (0.98 vs. 0.94) and sensitivity (96% vs. 92%) in predicting the occurrence of keratoconus.

CONCLUSIONS

The kc parameter extracted by video processing analysis of dynamic Scheimpflug tonometry data was highly accurate in discriminating patients with clinically manifest keratoconus compared with controls.

Tunable Macroscopic Alignment of Self-Assembling Peptide Nanofibers

Fibrous proteins that comprise the extracellular matrix (ECM) guide cellular growth and tissue organization. A lack of synthetic strategies able to generate aligned, ECM-mimetic biomaterials has hampered bottom-up tissue engineering of anisotropic tissues and led to a limited understanding of cell-matrix interactions. Here, we present a facile extrusion-based fabrication method to produce anisotropic, nanofibrous hydrogels using self-assembling peptides. The application of shear force coinciding with ion-triggered gelation is used to kinetically trap supramolecular nanofibers into aligned, hierarchical structures. We establish how modest changes in phosphate buffer concentration during peptide self-assembly can be used to tune their alignment and packing. In addition, increases in the nanostructural anisotropy of fabricated hydrogels are found to enhance their strength and stiffness under hydrated conditions. To demonstrate their utility as an ECM-mimetic biomaterial, aligned nanofibrous hydrogels are used to guide directional spreading of multiple cell types, but strikingly, increased matrix alignment is not always correlated with increased cellular alignment. Nanoscale observations reveal differences in cell-matrix interactions between variably aligned scaffolds and implicate the need for mechanical coupling for cells to understand nanofibrous alignment cues. In total, innovations in the supramolecular engineering of self-assembling peptides allow us to generate a gradient of anisotropic nanofibrous hydrogels, which are used to better understand directed cell growth.

Progressive alteration of murine bladder elasticity in actinic cystitis detected by Brillouin microscopy

Bladder mechanical properties are critical for organ function and tissue homeostasis. Therefore, alterations of tissue mechanics are linked to disease onset and progression. This study aims to characterize the tissue elasticity of the murine bladder wall considering its different anatomical components, both in healthy conditions and in actinic cystitis, a state characterized by tissue fibrosis. Here, we exploit Brillouin microscopy, an emerging technique in the mechanobiology field that allows mapping tissue mechanics at the microscale, in non-contact mode and free of labeling. We show that Brillouin imaging of bladder tissues is able to recognize the different anatomical components of the bladder wall, confirmed by histopathological analysis, showing different tissue mechanical properties of the physiological bladder, as well as a significant alteration in the presence of tissue fibrosis. Our results point out the potential use of Brillouin imaging on clinically relevant samples as a complementary technique to histopathological analysis, deciphering complex mechanical alteration of each tissue layer of an organ that strongly relies on mechanical properties to perform its function.

Multimodal diagnostics for keratoconus and ectatic corneal diseases: a paradigm shift

Different diagnostic approaches for ectatic corneal diseases (ECD) include screening, diagnosis confirmation, classification of the ECD type, severity staging, prognostic evaluation, and clinical follow-up. The comprehensive assessment must start with a directed clinical history. However, multimodal imaging tools, including Placido-disk topography, Scheimpflug three-dimensional (3D) tomography, corneal biomechanical evaluations, and layered (or segmental) tomography with epithelial thickness by optical coherence tomography (OCT), or digital very high-frequency ultrasound (dVHF-US) serve as fundamental complementary exams for measuring different characteristics of the cornea. Also, ocular wavefront analysis, axial length measurements, corneal specular or confocal microscopy, and genetic or molecular biology tests are relevant for clinical decisions. Artificial intelligence enhances interpretation and enables combining such a plethora of data, boosting accuracy and facilitating clinical decisions. The applications of diagnostic information for individualized treatments became relevant concerning the therapeutic refractive procedures that emerged as alternatives to keratoplasty. The first paradigm shift concerns the surgical management of patients with ECD with different techniques, such as crosslinking and intrastromal corneal ring segments. A second paradigm shift involved the quest for identifying patients at higher risk of progressive iatrogenic ectasia after elective refractive corrections on the cornea. Beyond augmenting the sensitivity to detect very mild (subclinical or fruste) forms of ECD, ectasia risk assessment evolved to characterize the inherent susceptibility for ectasia development and progression. Furthermore, ectasia risk is also related to environmental factors, including eye rubbing and the relational impact of the surgical procedure on the cornea.

Motion-Tracking Brillouin Microscopy Evaluation of Normal, Keratoconic, and Post-Laser Vision Correction Corneas

PURPOSE

To characterize focal biomechanical differences between normal, keratoconic, and post-laser vision correction (LVC) corneas using motion-tracking Brillouin microscopy.

DESIGN

Prospective cross-sectional study.

METHODS

Thirty eyes from 30 patients (10 normal controls [Controls], 10 post-LVC, and 10 stage I or II keratoconus [KC]) had Scheimpflug and motion-tracking Brillouin microscopy imaging using a custom-built device. Mean, maximum (max) and minimum (min) Brillouin shift, spatial standard deviation, and max-min values were compared. Min values were correlated with local Brillouin values at multiple Scheimpflug imaging locations.

RESULTS

Mean (P < .0003), min (P < .00001), spatial standard deviation (P < .01), and max-min (P < .001) were significantly different between the groups. In post hoc pairwise comparisons, the best differentiators for group comparisons were mean (P = .0004) and min (P = .000002) for Controls vs KC, min (P = .0022) and max-min (P = .002) for Controls vs LVC, and mean (P = .0037) and min (P = .0043) for LVC vs KC. Min (area under the receiver operating characteristic = 1.0) and mean (area under the receiver operating characteristic =  0.96) performed well in differentiating Control and KC eyes. Min values correlated best with Brillouin shift values at the thinnest corneal point (r2 = 0.871, P = .001) and maximum keratometry value identified in the tangential curvature map (r2 = 0.840, P = .002).

CONCLUSIONS

Motion-tracking Brillouin microscopy effectively characterized focal corneal biomechanical alterations in LVC and KC and clearly differentiated these groups from Controls. Primary motion-tracking Brillouin metrics performed well in differentiating groups as compared with basic Scheimpflug metrics, in contrast to previous Brillouin studies, and identified focal changes after LVC where prior Brillouin studies did not.

Keratoconus Diagnosis: From Fundamentals to Artificial Intelligence: A Systematic Narrative Review

The remarkable recent advances in managing keratoconus, the most common corneal ectasia, encouraged researchers to conduct further studies on the disease. Despite the abundance of information about keratoconus, debates persist regarding the detection of mild cases. Early detection plays a crucial role in facilitating less invasive treatments. This review encompasses corneal data ranging from the basic sciences to the application of artificial intelligence in keratoconus patients. Diagnostic systems utilize automated decision trees, support vector machines, and various types of neural networks, incorporating input from various corneal imaging equipment. Although the integration of artificial intelligence techniques into corneal imaging devices may take time, their popularity in clinical practice is increasing. Most of the studies reviewed herein demonstrate a high discriminatory power between normal and keratoconus cases, with a relatively lower discriminatory power for subclinical keratoconus.

Versatile multimodal modality based on Brillouin light scattering and the photoacoustic effect

Multimodal optical techniques are useful for the comprehensive characterization of material properties. In this work, we developed a new, to the best of our knowledge, multimodal technology that can simultaneously measure a subset of mechanical, optical, and acoustical properties of the sample and is based on the integration of Brillouin (Br) and photoacoustic (PA) microscopy. The proposed technique can acquire co-registered Br and PA signals from the sample. Importantly, using synergistic measurements of the speed of sound and Brillouin shift, the modality offers a new approach to quantifying the optical refractive index, which is a fundamental property of a material and is not accessible by either technique individually. As a proof of concept, we demonstrated the feasibility of integrating the two modalities and acquired the colocalized Br and time-resolved PA signals in a synthetic phantom made out of kerosene and CuSO4 aqueous solution. In addition, we measured the refractive index values of saline solutions and validated the result. Comparison with previously reported data showed a relative error of 0.3%. This further allowed us to directly quantify the longitudinal modulus of the sample with the colocalized Brillouin shift. While the scope of the current work is limited to introducing the combined Br-PA setup for the first time, we envision that this multimodal modality could open a new path for the multi-parametric analysis of material properties.

Characterization of the Immediate and Delayed Biomechanical Response to UV-A Crosslinking of Human Corneas

PURPOSE

Keratoconus leads to visual deterioration due to irregular astigmatism and corneal thinning. Riboflavin-based corneal UV-A crosslinking (CXL) induces novel intramolecular and intermolecular links resulting in corneal tissue stiffening, thereby halting disease progression. The purpose of this study was to analyze the immediate and delayed biomechanical responses of human donor corneas to CXL.

METHODS

CXL was performed according to the Dresden protocol to corneas not suitable for transplantation. Biomechanical properties were subsequently monitored by measuring the Young modulus using nanoindentation. The immediate tissue response was determined after 0, 1, 15, and 30 minutes of irradiation. Delayed biomechanical effects were investigated with follow-up measurements immediately and 1, 3, and 7 days after CXL.

RESULTS

Young's modulus indicated a linear trend in direct response to increasing irradiation times (mean values: total 61.31 kPa [SD 25.53], 0 minutes 48.82 kPa [SD 19.73], 1 minute 53.44 kPa [SD 25.95], 15 minutes 63.56 kPa [SD 20.99], and 30 minutes 76.76 kPa [SD 24.92]). The linear mixed model for the elastic response of corneal tissue was 49.82 kPa + (0.91 kPa/min × time [minutes]); P < 0.001. The follow-up measurements showed no significant delayed changes in the Young modulus (mean values: total 55,28 kPa [SD 15.95], immediately after CXL 56,83 kPa [SD 18.74], day 1 50.28 kPa [SD 14.15], day 3 57.08 kPa [SD 14.98], and day 7 56.83 kPa [SD 15.07]).

CONCLUSIONS

This study suggests a linear increase of corneal Young modulus as a function of CXL timing. No significant short-term delayed biomechanical changes posttreatment were observed.

Pulsed stimulated Brillouin microscopy

Stimulated Brillouin scattering is an emerging technique for probing the mechanical properties of biological samples. However, the nonlinear process requires high optical intensities to generate sufficient signal-to-noise ratio (SNR). Here, we show that the SNR of stimulated Brillouin scattering can exceed that of spontaneous Brillouin scattering with the same average power levels suitable for biological samples. We verify the theoretical prediction by developing a novel scheme using low duty cycle, nanosecond pulses for the pump and probe. A shot noise-limited SNR over 1000 was measured with a total average power of 10 mW for 2 ms or 50 mW for 200 µs integration on water samples. High-resolution maps of Brillouin frequency shift, linewidth, and gain amplitude from cells in vitro are obtained with a spectral acquisition time of 20 ms. Our results demonstrate the superior SNR of pulsed stimulated Brillouin over spontaneous Brillouin microscopy.

The role of KS GAGs in the microstructure of CXL-treated corneal stroma; a transmission electron microscopy study

The mechanical and physical properties of the cornea originate from the microstructure and composition of its extracellular matrix. It is known that collagen fibrils, with a relatively uniform diameter, are organized in a pseudo-hexagonal array. It has been suggested that proteoglycans and the interaction of their glycosaminoglycan (GAG) side chains with themselves and collagen fibrils are important for collagen fibril organization inside the cornea. There are several diseases such as keratoconus in which the regular collagen fibrillar packing becomes distorted causing corneal optical and mechanical properties to be compromised. The primary purpose of the present work was to investigate the role of GAGs on the microstructure of corneal extracellular matrix before and after corneal crosslinking (CXL) treatment. For this purpose, keratan sulphates (KS) were removed from corneal samples using the keratanase enzyme and the CXL procedure was used to crosslink the specimens. The transmission electron microscopy was then used to characterize the diameter of collagen fibrils and their interfibrillar spacing. It was found that KS GAG depletion increased the collagen interfibrillar spacing while the CXL treatment significantly decreased the interfibrillar spacing. The enzyme and CXL treatments had an insignificant effect on the diameter of collagen fibrils. The underlying mechanisms responsible for these observations were discussed in terms of the assumption that GAG chains form duplexes that behave as tiny ropes holding collagen fibrils in place.

In vivo corneal elastography: A topical review of challenges and opportunities

Clinical measurement of corneal biomechanics can aid in the early diagnosis, progression tracking, and treatment evaluation of ocular diseases. Over the past two decades, interdisciplinary collaborations between investigators in optical engineering, analytical biomechanical modeling, and clinical research has expanded our knowledge of corneal biomechanics. These advances have led to innovations in testing methods (ex vivo, and recently, in vivo) across multiple spatial and strain scales. However, in vivo measurement of corneal biomechanics remains a long-standing challenge and is currently an active area of research. Here, we review the existing and emerging approaches for in vivo corneal biomechanics evaluation, which include corneal applanation methods, such as ocular response analyzer (ORA) and corneal visualization Scheimpflug technology (Corvis ST), Brillouin microscopy, and elastography methods, and the emerging field of optical coherence elastography (OCE). We describe the fundamental concepts, analytical methods, and current clinical status for each of these methods. Finally, we discuss open questions for the current state of in vivo biomechanics assessment techniques and requirements for wider use that will further broaden our understanding of corneal biomechanics for the detection and management of ocular diseases, and improve the safety and efficacy of future clinical practice.

The Evolution of Diagnostics for Keratoconus: From Ophthalmometry to Biomechanics

PURPOSE

To enumerate the various diagnostic modalities used for keratoconus and their evolution over the past century.

METHODS

A comprehensive literature search including articles on diagnosis on keratoconus were searched on PUBMED and summarized in this review.

RESULTS

Initially diagnosed in later stages of the disease process through clinical signs and retinoscopy, the initial introduction of corneal topography devices like Placido disc, photokeratoscopy, keratometry and computer-assisted videokeratography helped in the earlier detection of keratoconus. The evolution of corneal tomography, initially with slit scanning devices and later with Scheimpflug imaging, has vastly improved the accuracy and detection of clinical and sub-clinical disease. Analyzing the alteration in corneal biomechanics further contributed to the earlier detection of keratoconus even before the tomographic changes became evident. Anterior segment optical coherence tomography has proven to be a helpful adjuvant in diagnosing keratoconus, especially with epithelial thickness mapping. Confocal microscopy has helped us understand the alterations at a cellular level in keratoconic corneas.

CONCLUSION

Thus, the collective contribution of the various investigative modalities have greatly enhanced earlier and accurate detection of keratoconus, thus reducing the disease morbidity.

A versatile multimodal optical modality based on Brillouin light scattering and photoacoustic effect

Multimodal optical imaging techniques are useful for various applications, including imaging biological samples for providing comprehensive material properties. In this work, we developed a new modality that can measure a set of mechanical, optical, and acoustical properties of a sample at microscopic resolution, which is based on the integration of Brillouin (Br) and photoacoustic (PA) microscopy. The proposed multimodal imaging technique not only can acquire co-registered Br and PA signals but also allows us to utilize the sound speed measured by PA to quantify the sample’s refractive index, which is a fundamental property of the material and cannot be measured by either technique individually. We demonstrated the colocalization of Br and time-resolved PA signals in a synthetic phantom made of kerosene and CuSO ₄ aqueous solution. In addition, we measured the refractive index of saline solutions and validated the result against published data with a relative error of 0.3 %. This multimodal Br-PA modality could open a new way for characterizing biological samples in physiological and pathological conditions.

In Vivo Corneal Stiffness Mapping by the Stress-Strain Index Maps and Brillouin Microscopy

The study of corneal stiffness in vivo has numerous clinical applications such as the measurement of intraocular pressure, the preoperative screening for iatrogenic ectasia after laser vision correction surgery and the diagnosis and treatment of corneal ectatic diseases such as keratoconus. The localised aspect of the microstructure deterioration in keratoconus leading to local biomechanical softening, corneal bulging, irregular astigmatism and ultimately loss of vision boosted the need to map the corneal stiffness to identify the regional biomechanical failure. Currently, two methods to map the corneal stiffness in vivo are integrated into devices that are either already commercially available or about to be commercialised: the stress-strain index (SSI) maps and the Brillouin Microscopy (BM). The former method produces 2D map of stiffness across the corneal surface, developed through numerical simulations using the corneal shape, its microstructure content, and the deformation behaviour under air-puff excitation. It estimates the whole stress-strain behaviour, making it possible to obtain the material tangent modulus under different intraocular pressure levels. On the other hand, BM produces a 3D map of the corneal longitudinal modulus across the corneal surface and thickness. It uses a low-power near-infrared laser beam and through a spectral analysis of the returned signal, it assesses the mechanical compressibility of the tissue as measured by the longitudinal modulus. In this paper, these two techniques are reviewed, and their advantages and limitations discussed.

Biomechanics in Keratoconus Diagnosis

Purpose: To prospectively review the importance of biomechanical assessment in the screening, diagnosis, prognosis, individualized planning, and clinical follow-up for ectatic corneal diseases.Methods: We demonstrate two commercially available devices to assess the corneal biomechanics in vivo, the Ocular Response Analyzer (ORA, Reichester, NY, USA) and the Corvis ST (Oculus, Wetzlar, Germany). Novel devices have been demonstrated to provide in vivo biomechanical measurements, including Brillouin optical microscopy and OCT elastography. Conclusion: The integration of biomechanical data and other data from multimodal refractive imaging using artificial intelligence demonstrated the ability to enhance accuracy in diagnosing ectatic corneal diseases.

Comprehensive Assessment of Corvis ST Biomechanical Indices in Normal and Keratoconus Corneas with Reference to Corneal Enantiomorphism

The aim of this study was to assess Corvis ST biomechanical indices in reference to corneal enantiomorphism. In a prospective observational cohort study, 117 eyes from 63 patients with normal or keratoconus corneas were assessed by three independent observers. In the control group (n = 62), no significant differences were observed between the three observers for all indices. The best reproducibility was obtained with pachymetry and the weakest with CBI. All indices but CBI and arc length featured COV < 10%. All indices except the PD and SSI correlated with pachymetry; all but Rad correlated with IOP. The comparison of the thinnest with the thickest corneas showed no significant differences for any index except pachymetry. In the keratoconus group (n = 55), loss of corneal enantiomorphism was confirmed for all indices except the arc length, velocity, and PD. Significant differences between both groups were found for all indices, even after adjustment for pachymetry and intraocular pressure. The CBI featured the best accuracy (92%), sensitivity (91%), and graphical relevance for keratoconus diagnosis. However, its reproducibility was weak in normal corneas and was strongly dependent on corneal thickness. The SSI was independent of corneal thickness, highly reproducible, and provided the expected enantiomorphism characteristics in both groups, making it a relevant biomarker of biomechanical corneal behavior.

In Vivo Biomechanical Measurements of the Cornea

In early corneal examinations, the relationships between the morphological and biomechanical features of the cornea were unclear. Although consistent links have been demonstrated between the two in certain cases, these are not valid in many diseased states. An accurate assessment of the corneal biomechanical properties is essential for understanding the condition of the cornea. Studies on corneal biomechanics in vivo suggest that clinical problems such as refractive surgery and ectatic corneal disease are closely related to changes in biomechanical parameters. Current techniques are available to assess the mechanical characteristics of the cornea in vivo. Accordingly, various attempts have been expended to obtain the relevant mechanical parameters from different perspectives, using the air-puff method, ultrasound, optical techniques, and finite element analyses. However, a measurement technique that can comprehensively reflect the full mechanical characteristics of the cornea (gold standard) has not yet been developed. We review herein the in vivo measurement techniques used to assess corneal biomechanics, and discuss their advantages and limitations to provide a comprehensive introduction to the current state of technical development to support more accurate clinical decisions.

Quantitative Evaluation of In Vivo Corneal Biomechanical Properties after SMILE and FLEx Surgery by Acoustic Radiation Force Optical Coherence Elastography

The purpose of this study is to quantitatively evaluate the differences in corneal biomechanics after SMILE and FLEx surgery using an acoustic radiation force optical coherence elastography system (ARF-OCE) and to analyze the effect of the corneal cap on the integrity of corneal biomechanical properties. A custom ring array ultrasound transducer is used to excite corneal tissue to produce Lamb waves. Depth-resolved elastic modulus images of the in vivo cornea after refractive surgery were obtained based on the phase velocity of the Lamb wave. After refractive surgery, the average elastic modulus of the corneal flap decreased (71.7 ± 24.6 kPa), while the elastic modulus of the corneal cap increased (219.5 ± 54.9 kPa). The average elastic modulus of residual stromal bed (RSB) was increased after surgery, and the value after FLEx (305.8 ± 48.5 kPa) was significantly higher than that of SMILE (221.3 ± 43.2 kPa). Compared with FLEx, SMILE preserved most of the anterior stroma with less change in corneal biomechanics, which indicated that SMILE has an advantage in preserving the integrity of the corneal biomechanical properties. Therefore, the biomechanical properties of the cornea obtained by the ARF-OCE system may be one of the essential indicators for evaluating the safety of refractive surgery.

In Vivo Evaluation of the Effects of SMILE with Different Amounts of Stromal Ablation on Corneal Biomechanics by Optical Coherence Elastography

This work aims to depth-resolved quantitatively analyze the effect of different stromal ablation amounts on the corneal biomechanical properties during small incision lenticule extraction (SMILE) using optical coherence elastography (OCE). A 4.5-MHz ultrasonic transducer was used to excite elastic waves in the corneal tissue. The OCE system combined with the antisymmetric Lamb wave model was employed to achieve a high-resolution, high-sensitivity, and depth-resolved quantitative detection of the corneal Young's modulus. Eighteen rabbits were randomly divided into three groups; each group had six rabbits. The first and second groups underwent -3D and -6D SMILE surgeries, and the third group was the control group, respectively. Young's modulus of the corneal cap and residual stromal bed (RSB) were both increased after SMILE, which shared the stress under intraocular pressure (IOP). Furthermore, the Young's modulus of both the corneal cap and RSB after 3D SMILE group were significantly lower than that in the -6D group, which indicated that the increases in the post-operative corneal Young's modulus were positively correlated with the amount of stromal ablation. The OCE system for quantitative spatial characterization of corneal biomechanical properties can provide useful information on the extent of safe ablation for SMILE procedures.

Techniques for In Vivo Assessment of Corneal Biomechanics: Brillouin Spectroscopy and Hydration State - Quo Vadis?

To assess the structural integrity of the cornea, non-invasive methods are needed for the local measurement of its mechanical properties. Among a number of established techniques and their associated advantages and disadvantages, Brillouin spectroscopy is still a relatively new technique, capable of determining the compressive modulus of biological tissue, specifically the cornea, in vivo. In the present paper, these various existing and developing technologies for corneal biomechanics are discussed and correlated.

Motion-tracking Brillouin microscopy for in-vivo corneal biomechanics mapping

Corneal biomechanics play a critical role in maintaining corneal shape and thereby directly influence visual acuity. However, direct corneal biomechanical measurement in-vivo with sufficient accuracy and a high spatial resolution remains an open need. Here, we developed a three-dimensional (3D) motion-tracking Brillouin microscope for in-vivo corneal biomechanics mapping. The axial tracking utilized optical coherence tomography, which provided a tracking accuracy better than 3 µm. Meanwhile, 10 µm lateral tracking was achieved by tracking pupils with digital image processing. The 3D tracking enabled reconstruction of depth-dependent Brillouin distribution with a high spatial resolution. This superior technical performance enabled the capture of high-quality mechanical mapping in vivo even while the subject was breathing normally. Importantly, we improved Brillouin spectral measurements to achieve relative accuracy better than 0.07% verified by rubidium absorption frequencies, with 0.12% stability over 2000 seconds. These specifications finally yield the Brillouin measurement sensitivity that is required to detect ophthalmology-relevant corneal biomechanical properties.

Corneal elastic property investigated by terahertz technology

Terahertz (THz) spectroscopy technique has been applied in ex vivo biomechanical properties analysis of human corneas. Upon the application of light pressure on the cornea, the photo elastic birefringent effect, anisotropic deformation, thickness changes and hydration levels will contribute to the sudden phase changes of terahertz time domain signal. The shelf lifetime study shows that the phase shift is reduced and cornea loose the biomechanical properties with the increase of hydration level. Mechanical behaviors have been further studied based on the "fresh" cut corneas with the similar hydration levels. THz signal was collected by focusing inside of the cornea to avoid the phase shift due to light stress caused movement of the corneal surface. By this way, the amount of THz signal refractive index variation is correlated to the elastic property of the corneas. The correlation between the THz signal phase shift and refractive index shift due to the corneal strain can be used to derive the elastic Young's modulus. Our results demonstrated the THz spectroscopy, as a non-contact and non-invasive detection method, could be potential for understanding the mechanism of corneal deformation under the action of intraocular pressure in the physiological environment in future.

Co-axial acoustic-based optical coherence vibrometry probe for the quantification of resonance frequency modes in ocular tissue

We present a co-axial acoustic-based optical coherence vibrometry probe (CoA-OCV) for vibro-acoustic resonance quantification in biological tissues. Sample vibrations were stimulated via a loudspeaker, and pre-compensation was used to calibrate the acoustic spectrum. Sample vibrations were measured via phase-sensitive swept-source optical coherence tomography (OCT). Resonance frequencies of corneal phantoms were measured at varying intraocular pressures (IOP), and dependencies on Young´s Modulus (E), phantom thickness and IOP were observed. Cycling IOP revealed hysteresis. For E = 0.3 MPa, resonance frequencies increased with IOP at a rate of 3.9, 3.7 and 3.5 Hz/mmHg for varied thicknesses and 1.7, 2.5 and 2.8 Hz/mmHg for E = 0.16 MPa. Resonance frequencies increased with thickness at a rate of 0.25 Hz/µm for E = 0.3 MPa, and 0.40 Hz/µm for E = 0.16 MPa. E showed the most predominant impact in the shift of the resonance frequencies. Full width at half maximum (FWHM) of the resonance modes increased with increasing thickness and decreased with increasing E. Only thickness and E contributed to the variance of FWHM. In rabbit corneas, resonance frequencies of 360-460 Hz were observed. The results of the current study demonstrate the feasibility of CoA-OCV for use in future OCT-V studies.

Multiple Optical Elastography Techniques Reveal the Regulation of Corneal Stiffness by Collagen XII

Purpose

Collagen XII plays a role in regulating the structure and mechanical properties of the cornea. In this work, several optical elastography techniques were used to investigate the effect of collagen XII deficiency on the stiffness of the murine cornea.

Methods

A three-prong optical elastography approach was used to investigate the mechanical properties of the cornea. Brillouin microscopy, air-coupled ultrasonic optical coherence elastography (OCE) and heartbeat OCE were used to assess the mechanical properties of wild type (WT) and collagen XII-deficient (Col12a1-/-) murine corneas. The Brillouin frequency shift, elastic wave speed, and compressive strain were all measured as a function of intraocular pressure (IOP).

Results

All three optical elastography modalities measured a significantly decreased stiffness in the Col12a1-/- compared to the WT (P < 0.01 for all three modalities). The optical coherence elastography techniques showed that mean stiffness increased as a function of IOP; however, Brillouin microscopy showed no discernable trend in Brillouin frequency shift as a function of IOP.

Conclusions

Our approach suggests that the absence of collagen XII significantly softens the cornea. Although both optical coherence elastography techniques showed an expected increase in corneal stiffness as a function of IOP, Brillouin microscopy did not show such a relationship, suggesting that the Brillouin longitudinal modulus may not be affected by changes in IOP. Future work will focus on multimodal biomechanical models, evaluating the effects of other collagen types on corneal stiffness, and in vivo measurements.

Multimodal microscale mechanical mapping of cancer cells in complex microenvironments

The mechanical phenotype of the cell is critical for survival following deformations due to confinement and fluid flow. One idea is that cancer cells are plastic and adopt different mechanical phenotypes under different geometries that aid in their survival. Thus, an attractive goal is to disrupt cancer cells' ability to adopt multiple mechanical states. To begin to address this question, we aimed to quantify the diversity of these mechanical states using in vitro biomimetics to mimic in vivo two-dimensional (2D) and 3D extracellular matrix environments. Here, we used two modalities Brillouin microscopy (∼GHz) and broadband frequency (7-15 kHz) optical tweezer microrheology to measure microscale cell mechanics. We measured the response of intracellular mechanics of cancer cells cultured in 2D and 3D environments where we modified substrate stiffness, dimensionality (2D versus 3D), and presence of fibrillar topography. We determined that there was good agreement between two modalities despite the difference in timescale of the two measurements. These findings on cell mechanical phenotype in different environments confirm a correlation between modalities that employ different mechanisms at different temporal scales (Hz-kHz versus GHz). We also determined that observed heterogeneity in cell shape is more closely linked to the cells' mechanical state. Moreover, individual cells in multicellular spheroids exhibit a lower degree of mechanical heterogeneity when compared with single cells cultured in monodisperse 3D cultures. The observed decreased heterogeneity among cells in spheroids suggested that there is mechanical cooperativity between cells that make up a single spheroid.

In situ measurement of the stiffness increase in the posterior sclera after UV-riboflavin crosslinking by optical coherence elastography

Scleral crosslinking may provide a way to prevent or treat myopia by stiffening scleral tissues. The ability to measure the stiffness of scleral tissues in situ pre and post scleral crosslinking would be useful but has not been established. Here, we tested the feasibility of optical coherence elastography (OCE) to measure shear modulus of scleral tissues and evaluate the impact of crosslinking on different posterior scleral regions using ex vivo porcine eyes as a model. From measured elastic wave speeds at 6 - 16 kHz, we obtained out-of-plane shear modulus value of 0.71 ± 0.12 MPa (n = 20) for normal porcine scleral tissues. After riboflavin-assisted UV crosslinking, the shear modulus increased to 1.50 ± 0.39 MPa (n = 20). This 2-fold change was consistent with the increase of static Young's modulus from 5.5 ± 1.1 MPa to 9.3 ± 1.9 MPa after crosslinking, which we measured using conventional uniaxial extensometry on tissue stripes. OCE revealed regional stiffness differences across the temporal, nasal, and deeper posterior sclera. Our results show the potential of OCE as a noninvasive tool to evaluate the effect of scleral crosslinking.

Self-generated gradients steer collective migration on viscoelastic collagen networks

Growing evidence suggests that the physical properties of the cellular microenvironment influence cell migration. However, it is not currently understood how active physical remodelling by cells affects migration dynamics. Here we report that cell clusters seeded on deformable collagen-I networks display persistent collective migration despite not showing any apparent intrinsic polarity. Clusters generate transient gradients in collagen density and alignment due to viscoelastic relaxation of the collagen networks. Combining theory and experiments, we show that crosslinking collagen networks or reducing cell cluster size results in reduced network deformation, shorter viscoelastic relaxation time and smaller gradients, leading to lower migration persistence. Traction force and Brillouin microscopy reveal asymmetries in force distributions and collagen stiffness during migration, providing evidence of mechanical cross-talk between cells and their substrate during migration. This physical model provides a mechanism for self-generated directional migration on viscoelastic substrates in the absence of internal biochemical polarity cues.

Corneal biomechanics for corneal ectasia: Update

Knowledge of biomechanical principles has been applied in several clinical conditions, including correcting intraocular pressure measurements, planning and following corneal treatments, and even allowing an enhanced ectasia risk evaluation in refractive procedures. The investigation of corneal biomechanics in keratoconus (KC) and other ectatic diseases takes place in several steps, including screening ectasia susceptibility, the diagnostic confirmation and staging of the disease, and also clinical characterization. More recently, investigators have found that the integration of biomechanical and tomographic data through artificial intelligence algorithms helps to elucidate the etiology of KC and ectatic corneal diseases, which may open the door for individualized or personalized medical treatments in the near future. The aim of this article is to provide an update on corneal biomechanics in the screening, diagnosis, staging, prognosis, and treatment of KC.

In Vivo Determination of the Human Corneal Elastic Modulus Using Vibrational Optical Coherence Tomography

Purpose

To determine the in vivo elastic modulus of the human cornea using vibrational optical coherence tomography (VOCT).

Methods

Vibrational analysis coupled with optical coherence tomography (OCT) was used to obtain the resonant frequency (RF) and elastic modulus of corneal structural components. VOCT corneal thickness values were measured using OCT images and correlated with corneal thickness determined with Pentacam (Oculus, Wetzlar, Germany). Moduli were obtained at two locations: central cornea (CC) and inferior cornea (IC). Measurements were obtained with and without anesthetic eye drops to assess their effect on the modulus measurements.

Results

VOCT thickness values correlated positively (R² = 0.97) and linearly (y = 1.039x–16.89) with those of Pentacam. Five RF peaks (1–5) were present, although their presence was variable across eyes. The RF for peaks 1 to 5 in the CC and IC ranged from 73.5 ± 4.9 to 239 ± 3 Hz and 72.1 ± 6.3 to 238 ± 4 Hz, respectively. CC and IC moduli for peaks 1 to 5 ranged from 1.023 ± 0.104 to 6.87 ± 0.33 MPa and 0.98 ± 0.15 to 6.52 ± 0.79 MPa, respectively. Topical anesthesia did not significantly alter the modulus (P > 0.05 for all), except for peak 2 in the CC (P < 0.05).

Conclusions

This pilot study demonstrates the utility of VOCT as an in vivo, noninvasive technology to measure the elastic modulus in human corneas. The structural origin of these moduli is hypothesized based on previous reports, and further analyses are necessary for confirmation.

Translational Relevance

This work presents VOCT as a novel approach to assess the in vivo elastic modulus of the cornea, an indicator of corneal structural integrity and health.

Small Incision Lenticule Extraction (SMILE) for the Correction of High Myopia With Astigmatism

PURPOSE

To report the outcomes of small incision lenticule extraction (SMILE) for high myopia between -9.00 and -14.00 diopters (D).

METHODS

This was a prospective study of SMILE for high myopia using the VisuMax femtosecond laser (Carl Zeiss Meditec). Inclusion criteria were attempted spherical equivalent refraction (SEQ) between -9.00 and -14.00 D, cylinder up to 7.00 D, corrected distance visual acuity (CDVA) of 20/40 or better, age 21 years or older, and suitable for SMILE. The sub-lenticule thickness was 220 µm or greater, and the total uncut stromal thickness was 300 µm or greater. Patients were to be followed up for 1 year. Standard outcomes analysis was performed using 12-month data where available or 3-month data otherwise.

RESULTS

Of 187 eyes treated, data were available at 12 months for 181 eyes (96.8%) and 3 months for 4 eyes (2.1%), and 2 eyes (1.1%) were lost to follow-up. Mean attempted SEQ was -10.55 ± 1.00 D (range: -9.00 to -12.99 D). Mean cylinder was -1.19 ± 0.83 D (range: 0.00 to -4.00 D). Preoperative CDVA was 20/20 or better in 73% of eyes. Postoperative uncorrected distance visual acuity was 20/20 or better in 57% and 20/25 or better in 82% of eyes. Mean SEQ relative to target was -0.22 ± 0.48 D (range: -1.63 to +1.38 D), 66% ± 0.50 D and 93% ±1.00 D. Mean SEQ 12-month change was -0.08 ± 0.34 D (range: -1.75 to +0.88 D). There was loss of one line of CDVA in 4% of eyes, and no eyes lost two or more lines. Contrast sensitivity was unchanged. Patient satisfaction was 8 or more out of 10 in 94% and 6 or more in 99% of patients.

CONCLUSIONS

Outcomes of SMILE for myopia greater than -9.00 D at 3 to 12 months showed excellent efficacy, safety, stability, and predictability, with high patient satisfaction. [J Refract Surg. 2022;38(5):262-271.].

The Effect of Intracorneal Ring Segments Implantation for Keratoconus on In Vivo Corneal Biomechanics Assessed With the Corvis ST

PURPOSE

To evaluate the effect of the implantation of intracorneal ring segments (ICRS) in keratoconus on the dynamic corneal response (DCR) parameters obtained with the Corvis ST (Oculus Optikgeräte GmbH).

METHODS

This prospective clinical study included patients who underwent ICRS implantation for keratoconus over a period of 1 year. On the day of the surgery and at least 1 month after ICRS implantation, the following measurements were made: corrected and uncorrected distance visual acuity, corneal tomography indices with the Pentacam (Oculus Optikgeräte GmbH), biomechanically corrected intraocular pressure (bIOP), Corvis ST DCR parameters, integrated inverse concave radius (1/R), deformation amplitude ratio (DA ratio), stiffness parameter at first applanation (SP-A1), stress-strain index (SSI), and highest concavity radius (HRC).

RESULTS

Fifty-one eyes of 40 patients were included with a median follow-up time of 3 months (interquartile ratio [IQR]: 2 to 6 months). Statistical analysis showed that ICRS implantation did not affect corneal biomechanical measurements evaluated with the Corvis ST, which was demonstrated by non-significant changes in the SP-A1 (P = .637), 1/R (P = .647), HRC (P = .177), DA ratio (P = .735), and SSI (P = .501). Additionally, the results showed that bIOP measurements were not significantly affected by ICRS implantation (P = .113).

CONCLUSIONS

ICRS implantation does not affect corneal biomechanical measurements in early follow-up. [J Refract Surg. 2022;38(4):264-269.].

Multimodal imaging system combining optical coherence tomography and Brillouin microscopy for neural tube imaging

To understand the dynamics of tissue stiffness during neural tube formation and closure in a murine model, we have developed a multimodal, coaligned imaging system combining optical coherence tomography (OCT) and Brillouin microscopy. Brillouin microscopy can map the longitudinal modulus of tissue but cannot provide structural images. Thus, it is limited for imaging dynamic processes such as neural tube formation and closure. To overcome this limitation, we have combined Brillouin microscopy and OCT in one coaligned instrument. OCT provided depth-resolved structural imaging with a micrometer-scale spatial resolution to guide stiffness mapping by Brillouin modality. 2D structural and Brillouin frequency shift maps were acquired of mouse embryos at gestational day (GD) 8.5, 9.5, and 10.5 with the multimodal system. The results demonstrate the capability of the system to obtain structural and stiffness information simultaneously.

Correlative all-optical quantification of mass density and mechanics of subcellular compartments with fluorescence specificity

Quantitative measurements of physical parameters become increasingly important for understanding biological processes. Brillouin microscopy (BM) has recently emerged as one technique providing the 3D distribution of viscoelastic properties inside biological samples - so far relying on the implicit assumption that refractive index (RI) and density can be neglected. Here, we present a novel method (FOB microscopy) combining BM with optical diffraction tomography and epifluorescence imaging for explicitly measuring the Brillouin shift, RI, and absolute density with specificity to fluorescently labeled structures. We show that neglecting the RI and density might lead to erroneous conclusions. Investigating the nucleoplasm of wild-type HeLa cells, we find that it has lower density but higher longitudinal modulus than the cytoplasm. Thus, the longitudinal modulus is not merely sensitive to the water content of the sample - a postulate vividly discussed in the field. We demonstrate the further utility of FOB on various biological systems including adipocytes and intracellular membraneless compartments. FOB microscopy can provide unexpected scientific discoveries and shed quantitative light on processes such as phase separation and transition inside living cells.

Wave-based optical coherence elastography: The 10-year perspective

After 10 years of progress and innovation, optical coherence elastography (OCE) based on the propagation of mechanical waves has become one of the major and the most studied OCE branches, producing a fundamental impact in the quantitative and nondestructive biomechanical characterization of tissues. Preceding previous progress made in ultrasound and magnetic resonance elastography; wave-based OCE has pushed to the limit the advance of three major pillars: (1) implementation of novel wave excitation methods in tissues, (2) understanding new types of mechanical waves in complex boundary conditions by proposing advance analytical and numerical models, and (3) the development of novel estimators capable of retrieving quantitative 2D/3D biomechanical information of tissues. This remarkable progress promoted a major advance in answering basic science questions and the improvement of medical disease diagnosis and treatment monitoring in several types of tissues leading, ultimately, to the first attempts of clinical trials and translational research aiming to have wave-based OCE working in clinical environments. This paper summarizes the fundamental up-to-date principles and categories of wave-based OCE, revises the timeline and the state-of-the-art techniques and applications lying in those categories, and concludes with a discussion on the current challenges and future directions, including clinical translation research.

Mechanical Modulation of Ovarian Cancer Tumor Nodules Under Flow

OBJECTIVE

Perfusion models are valuable tools to mimic complex features of the tumor microenvironment and to study cell behavior. In ovarian cancer, mimicking disease pathology of ascites has been achieved by seeding tumor nodules on a basement membrane and subjecting them to long-term continuous flow. In this scenario it is particularly important to study the role of mechanical stress on cancer progression. Mechanical cues are already known to be important in key cancer processes such as survival, proliferation, and migration. However, probing cell mechanical properties within microfluidic platforms has not been achievable with current technologies since samples are not easily accessible within most microfluidic channels.

METHODS

Here, to analyze the mechanical properties of cells within a perfusion chamber, we use Brillouin confocal microscopy, an all-optical technique that requires no contact or perturbation to the sample.

RESULTS

Our results indicate that ovarian cancer nodules under long-term continuous flow have a significantly lower longitudinal modulus compared to nodules maintained in a static condition.

CONCLUSION

We further dissect the role of distinct mechanical perturbations (e.g., shear flow, osmolality) on tumor nodule properties.

SIGNIFICANCE

In summary, the unique combination of a long-term microfluidic culture and noninvasive mechanical analysis technique provides insights on the effects of physical forces in ovarian cancer pathology.

Detektion des subklinischen Keratokonus

Das Frühstadium eines Keratokonus, ohne klassische und kennzeichnende klinische Befunde, stellt eine Kontraindikation für refraktive Chirurgie dar. Dieser Beitrag zeigt deshalb gemäß dem aktuellen Stand der Technik Möglichkeiten auf, Risikofaktoren für einen subklinischen Keratokonus zu erkennen.

[Detection of Subclinical Keratoconus]

The early stage of a keratoconus (KC), without classic and characteristic clinical findings, is a contraindication for refractive surgery. This article therefore shows, in accordance with the current state of the art, ways of identifying risk factors for subclinical keratoconus.After delimitation, this publication contains a current summary of epidemiology, etiology and pathophysiology of subclinical and clinical KC. Furthermore, an overview of different grading scales is given. A detailed description of several practical possibilities for detection of subclinical KC is the focus of this publication: typical abnormalities with subclinical KC in ocular aberrometry, corneal topography, Zernike analysis, Fourier analysis, indices of the corneal anterior surface; especially tomography of the anterior segment of the eye respecting addition of the corneal posterior surface and the pachymetry, and also innovative techniques counting in the rigidity or biomechanical properties, as well as traditional techniques giving hints for subclinical KC as retinoscopy, ophthalmoscopy and subjective refraction.In preparation for refractive surgical interventions and to avoid possible consequences of subclinical KC, a suitable analysis with different methods should always be carried out in addition to a specific anamnesis. An exclusive consideration of the available indices is not sufficient, as this does not reveal early stages. Ideally, the biomechanics of the cornea is included in the diagnosis. The combination of tomography and biomechanics with methods of artificial intelligence are trendsetting in detection of subclinical KC.

Estimation of scleral mechanical properties from air-puff optical coherence tomography

We introduce a method to estimate the biomechanical properties of the porcine sclera in intact eye globes ex vivo, using optical coherence tomography that is coupled with an air-puff excitation source, and inverse optimization techniques based on finite element modeling. Air-puff induced tissue deformation was determined at seven different locations on the ocular globe, and the maximum apex deformation, the deformation velocity, and the arc-length during deformation were quantified. In the sclera, the experimental maximum deformation amplitude and the corresponding arc length were dependent on the location of air-puff excitation. The normalized temporal deformation profile of the sclera was distinct from that in the cornea, but similar in all tested scleral locations, suggesting that this profile is independent of variations in scleral thickness. Inverse optimization techniques showed that the estimated scleral elastic modulus ranged from 1.84 ± 0.30 MPa (equatorial inferior) to 6.04 ± 2.11 MPa (equatorial temporal). The use of scleral air-puff imaging holds promise for non-invasively investigating the structural changes in the sclera associated with myopia and glaucoma, and for monitoring potential modulation of scleral stiffness in disease or treatment.