Heavy metal removal applications using adsorptive membranes

Enhancement of adsorption of cyanobacteria, Microcystisa aeruginosaby bacterial-based compounds

In the present study, algicidal bacteria cultivated in an aqueous medium were utilized as a surface modification agent to develop an efficient adsorbent for the removal of Microcystis aeruginosa. The modification considerably enhanced M. aeruginosa cell removal efficiency. Moreover, the introduction of bio-compounds ensured specificity in the removal of M. aeruginosa. Additionally, the cyanotoxin release and acute toxicity tests demonstrated that the adsorption process using the developed adsorbent is environmentally safe. Furthermore, the practical feasibility of the adsorptive removal of M. aeruginosa was confirmed through cell removal tests performed using the developed adsorbent in a scaled-up reactor (50 L and 10 tons). In these tests, the effects of the adsorbent application type, water temperature, and initial cell concentration on the M. aeruginosa removal efficiency were evaluated. The results of this study provide novel insights into the valorization strategy of biological algicides repurposed as adsorbents, and provide practical operational data for effective M. aeruginosa removal in scaled-up conditions.

Recent Trends of Bioanalytical Sensors with Smart Health Monitoring Systems: From Materials to Applications

Smart biosensors attract significant interest due to real-time monitoring of user health status, where bioanalytical electronic devices designed to detect various activities and biomarkers in the human body have potential applications in physical sign monitoring and health care. Bioelectronics can be well integrated by output signals with wireless communication modules for transferring data to portable devices used as smart biosensors in performing real-time diagnosis and analysis. In this review, the scientific keys of biosensing devices and the current trends in the field of smart biosensors, (functional materials, technological approaches, sensing mechanisms, main roles, potential applications and challenges in health monitoring) will be summarized. Recent advances in the design and manufacturing of bioanalytical sensors with smarter capabilities and enhanced reliability indicate a forthcoming expansion of these smart devices from laboratory to clinical analysis. Therefore, a general description of functional materials and technological approaches used in bioelectronics will be presented after the sections of scientific keys to bioanalytical sensors. A careful introduction to the established systems of smart monitoring and prediction analysis using bioelectronics, regarding the integration of machine-learning-based basic algorithms, will be discussed. Afterward, applications and challenges in development using these smart bioelectronics in biological, clinical, and medical diagnostics will also be analyzed. Finally, the review will conclude with outlooks of smart biosensing devices assisted by machine learning algorithms, wireless communications, or smartphone-based systems on current trends and challenges for future works in wearable health monitoring.

Metal nanostructures in polymeric matrices for optical detection and removal of heavy metal ions, pesticides and dyes from water

Water pollutants such as heavy metal ions, pesticides, and dyes pose a worldwide issue. Their presence in water resources interferes with the normal growth mechanisms of living beings and causes long or short-term diseases. For this reason, research continuously tends to develop innovative, selective, and efficient processes or technologies to detect and remove pollutants from water. This review provides an up-to-date overview on metal nanoparticles loaded in polymeric matrices, such as hydrogels and membranes, and employed as optical sensors and as removing materials for water pollutants. The synthetic pathways of nanomaterials loading into polymeric matrices have been analyzed, particularly focusing on noble metal nanoparticles, noble metal nanoclusters, and metal oxide nanoparticles. Moreover, the sensing properties of modified matrices towards water pollutants have been discussed in addition to the interaction mechanisms between the sensors and the toxic compounds. The last part of the review has been devoted to illustrating the separation mechanism and removal performance of membranes loaded with nanomaterials in the treatment and purification of water streams from different contaminants (heavy metals, dyes and pesticides).

Remediate and sense: alginate beads empowered by portable electrochemical strips for copper ion removal and detection at environmental sites

The contamination of environmental sites due to the presence of persistent species represents an important issue to be tackled. In particular, the presence of high levels of metals in soil and surface water is more frequent. One of the metals that sometimes exceeds the permissible limit set by regulatory authorities is copper. For instance, copper-based fungicides are widely used in viticulture. However, copper ions remain in soil and can enter the food chain, posing threats to human health and environmental safety. Although the rapid detection of copper ions using portable sensors is effective in enhancing early warning, it sometimes solves only half of the problem as remediation is not considered. In this paper, we present a novel integrated/portable approach that merges the remediation and sensing of metals by proposing a remediate-and-sense concept. In order to realize this concept, alginate beads were coupled with printed electrochemical strips for on-site copper detection. Within the same architecture, alginate beads were used to remove copper ions from the soil, and printed electrochemical strips were used to evaluate the efficacy of remediation at the point of need. The concept was applied towards soil containing copper ions at the parts per billion level; with few alginate beads and in the absence of additional species, copper ions were quantitatively removed from the matrix; and 3D printing allowed us to combine the printed strips and spheres within a unique tool. The architecture was optimized and the results were compared to inductively coupled plasma-mass spectrometry (ICP-MS) measurements with a recovery percentage of 90%-110%. It should be noted that this novel portable approach may be applied to other pollutants, opening new possibilities for integrated remediation and sensing.

Characterizing Macroporous Ion Exchange Membrane Adsorbers for Natural Organic Matter (NOM) Removal-Adsorption and Regeneration Behavior

Addressing the characterization of Natural Organic Matter (NOM) removal by functionalized membranes in water treatment, this study evaluates the effectiveness of two commercial ion-exchange membrane adsorbers: Sartobind® Q (with quaternary amines) and D (with tertiary amines). Using Suwannee River NOM (SRNOM) as a surrogate, Langmuir adsorption isotherms revealed maximum capacities (Qmax) of 2966 ± 153 mg C/m2 and 2888 ± 112 mg C/m2, respectively. Variations in flux from 50 to 500 LMH had a minimal impact on breakthrough times, proving low diffusion limitations. The macroporous (3-5 µm) functionalized cellulose-based membranes exhibited high permeabilities of 10,800 L/(h m2 bar). Q maintained positive zeta potential vs. pH, while D's zeta potential decreased above pH 7 due to amine deprotonation and turning negative above an isoelectric point of 9.1. Regeneration with 0.01 M NaOH achieved over 95% DOC regeneration for Sartobind® D, characterizing reversibility through a pH-swing. Cyclic adsorption showed that Q maintained its capacity with over 99% DOC regeneration, while D required acidic conditioning after the first regeneration cycle to mitigate capacity reduction and re-deprotonate the adsorber. These results have demonstrated the potential suitability of adsorber membranes, designed originally for biotechnological purposes, for the possible removal of disinfection byproduct precursors in drinking water treatment.

Recent advances in alginate-based composite gel spheres for removal of heavy metals

The discharge of heavy metal ions from industrial wastewater into natural water bodies is a consequence of global industrialisation. Due to their high toxicity and resistance to degradation, these heavy metal ions pose a substantial threat to human health as they accumulate and amplify. Alginate-based composite gels exhibit good adsorption and mechanical properties, excellent biodegradability, and non-toxicity, making them environmentally friendly heavy metal ion adsorbents for water with promising development prospects. This paper introduces the basic properties, cross-linking methods, synthetic approaches, modification methods, and manufacturing techniques of alginate-based composite gels. The adsorption properties and mechanical strength of these gels can be enhanced through surface modification, multi-component mixing, and embedding. The main production processes involved are sol-gel and cross-linking methods. Additionally, this paper reviews various applications of alginate composite gels for common heavy metals, rare earth elements, and radionuclides and elucidates the adsorption mechanism of alginate composite gels. This study aimed to provide a reference for synthesising new, efficient, and environmentally friendly alginate-based adsorbents and to contribute new ideas and directions for addressing the issue of heavy metal pollution.

Design and application of metal organic frameworks for heavy metals adsorption in water: a review

The growing apprehension surrounding heavy metal pollution in both environmental and industrial contexts has spurred extensive research into adsorption materials aimed at efficient remediation. Among these materials, Metal-Organic Frameworks (MOFs) have risen as versatile and promising contenders due to their adjustable properties, expansive surface areas, and sustainable characteristics, compared to traditional options like activated carbon and zeolites. This exhaustive review delves into the synthesis techniques, structural diversity, and adsorption capabilities of MOFs for the effective removal of heavy metals. The article explores the evolution of MOF design and fabrication methods, highlighting pivotal parameters influencing their adsorption performance, such as pore size, surface area, and the presence of functional groups. In this perspective review, a thorough analysis of various MOFs is presented, emphasizing the crucial role of ligands and metal nodes in adapting MOF properties for heavy metal removal. Moreover, the review delves into recent advancements in MOF-based composites and hybrid materials, shedding light on their heightened adsorption capacities, recyclability, and potential for regeneration. Challenges for optimization, regeneration efficiency and minimizing costs for large-scale applications are discussed.

Potential of using Alfa grass fibers (Stipa Tenacissima L.) to remove Pb2+, Cu2+, and Zn2+ from an aqueous solution

This study used alfa grass fibres as a natural low-cost adsorbent to remove lead, copper, and zinc ions from aqueous solutions. The adsorbent was characterized by FTIR, SEM, BET surface area, ATG, and XRD techniques. The effects of pH, contact time, initial metal concentration, and adsorbent dosage on the adsorption efficiency were evaluated in batch experiments. The results showed that the adsorption of all metals was fast, and optimal removal efficiency was achieved within 25 min of contact time using 5000 mg/L of Alfa fibres at pH 6.3. The adsorption selectivity order was Pb2+ > Cu2+ > Zn2+ with Pb2+ removal efficiencies up to 97.6%. The adsorption kinetics were best explained by a pseudo-second-order kinetic model. The experimental adsorption data fitted very well with the Langmuir isotherm model, and less well with the Freundlich and Temkin isotherm models. The maximum adsorption capacities were respectively 14.492, 11.904, and 8.695 mg/g for Pb2+, Cu2+, and Zn2+. The results of this study indicated that Alfa fibres could be used as effective adsorbent for the removal of Pb2+, Cu2+, and Zn2+ from aqueous solutions.

Biodegradation strategies of veterinary medicines in the environment: Enzymatic degradation

One Health closely integrates healthy farming, human medicine, and environmental ecology. Due to the ecotoxicity and risk of transmission of drug resistance, veterinary medicines (VMs) are regarded as emerging environmental pollutants. To reduce or mitigate the environmental risk of VMs, developing friendly, safe, and effective removal technologies is an important means of environmental remediation for VMs. Many previous studies have proved that biodegradation has significant advantages in removing VMs, and biodegradation based on enzyme catalysis presents higher operability and specificity. This review focused on biodegradation strategies of environmental pollutants and reviewed the enzymatic degradation of VMs including antimicrobial drugs, insecticides, and disinfectants. We reviewed the sources and catalytic mechanisms of peroxidase, laccase, and organophosphorus hydrolases, and summarized the latest research status of immobilization methods and bioengineering techniques in improving the performance of degrading enzymes. The mechanism of enzymatic degradation for VMs was elucidated in the current research. Suggestions and prospects for researching and developing enzymatic degradation of VMs were also put forward. This review will offer new ideas for the biodegradation of VMs and have a guide significance for the risk mitigation and detoxification of VMs in the environment.

Revealing transmissions of atmospheric heavy metals hidden in the Chinese supply chain

Heavy metals (HMs) pose significant risks to human health and the environment. Identifying the sectors that play a significant role in the transmission of HMs has rarely been considered and represents an efficient method to control and manage HMs. By combining atmospheric HM emission inventories, the multi-regional input-output approach, and a betweenness-based method, this study revealed the transmission of HMs (comprehensively evaluated by the Heavy Metal Pollution Load, HMPL) in 2017. In 2017, 119.86 million tons of HMPL were transmitted through China's supply chain, and Cr was the main contributor to HMPL transmission. The results suggest that metal smelting is the primary contributor to HMPL transmission, and metal smelting in Jiangsu, Hebei, Henan, Shandong, and Anhui are the top five critical nodes. These results suggest that the sector's role changes dramatically with respect to HM control under this perspective. The role of HM emission-intensive sectors changed the most, as their production-based HMPLs accounted for 84% of the total HMPL; however, the HMPL transmitted by these sectors accounted for only 45% of the total. The critical HMPL transmission sectors identified in this study provide a basis for policy-making from a transmission perspective.

Colloidal adsorption in planar polymeric brushes

The design of nano-functionalised membranes or channels, able to effectively adsorb pollutants in aqueous solutions, is a topic that is gaining a great deal of attention in the materials science community. With this work we explore, through a combination of scaling theories and molecular dynamics simulations, the adsorption of spherical non-deformable colloidal nanoparticles within planar polymeric brushes. Our strategy is twofold: first, we generalise the Alexander-de Gennes theory for planar homopolymeric brushes to the case of diblock copolymer brushes, then we map the adsorbing homopolymeric brushes onto a diblock copolymer system, where the adsorbed colloids and all interacting monomers are considered monomers in bad solvent and we apply the generalised scaling theory to this effective diblock copolymer. This allows the prediction of the average conformation of the grafted substrate, i.e. its average height, as a function of the amount of loaded particles, as well as the introduction of a continuous mapping between a homopolymeric brush, the fraction of loaded particles and the average height of the adsorbing substrate.

Utilizing adsorption of wood and its derivatives as an emerging strategy for the treatment of heavy metal-contaminated wastewater

The rapid development of the industrial sector has resulted in tremendous economic growth. However, this growth has also presented environmental challenges, specifically due to the substantial sewage generated and its contribution to the early warning of global water resource depletion. Large concentrations of poisonous heavy metals, including cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), and nickel (Ni), are found in industrial effluent. Therefore, various studies are currently underway to provide effective solutions to alleviate heavy metal ion pollution in sewage. One emerging strategy for sewage pollution remediation is adsorption using wood and its derivatives. This approach is gaining popularity due to the porous structure, excellent mechanical properties, and easy chemical modification of wood. Recent studies have focused on removing heavy metal ions from sewage, summarising and analysing different technical principles, affecting factors, and mainstream chemical modification methods on wood. Furthermore, this work provides insight into potential future development direction for enhanced adsorption of heavy metal ions using wood and its derivatives in wastewater treatment. Overall, this review aims to raise awareness of environmental pollution caused by heavy metals in sewage and promote green environmental protection, low-carbon energy-saving, and sustainable solutions for sewage heavy metal treatment.

Natural bamboo powder and coffee ground as low-cost green adsorbents for the removal of rhodamine B and their recycling performance

Bamboo and coffee, which are abundant and inexpensive, have been used as green adsorbents for the adsorption of industrial dye rhodamine B (RB). Bamboo and coffee are natural sources of cellulose, hemicellulose, and lignin, making them promising green materials for industrial dye removal. The effects of various adsorption conditions, such as contact time, temperature, dose of bamboo powder (BP), coffee ground (CG), initial concentration of RB, and pH values of RB solution, were measured. Consequently, the kinetics of RB adsorption onto bamboo and coffee was in accordance with the pseudo-second-order model, with an activation energy of 29.51 kJ mol-1 for bamboo and 27.46 kJ mol-1 for coffee. The Langmuir model is well fitted to the whole adsorption period at different temperatures, in which the increase in the tested temperature has improved the adsorption capacity (i.e., BP: 6.76 mg g-1/30 °C, 6.96 mg g-1/40 °C, 7.64 mg g-1/50 °C and CG: 6.53 mg g-1/30 °C, 6.80 mg g-1/40 °C, 7.51 mg g-1/50 °C). Moreover, the spontaneous nature of the adsorption was based on the negative Gibbs free energy values obtained (i.e., from - 11.09 to - 14.30 kJ mol-1 [BP] and from - 10.34 to - 13.07 kJ mol-1 [CG]). These revealed that RB adsorption occurred at physical and chemical adsorption states. In addition, the recycling capability of adsorbents was determined in five cycles. Therefore, these materials are promising candidates for low-cost adsorbents.

Encapsulation of heavy metal ions via adsorption using cellulose/ZnO composite: First principles approach

The primary goal of the current research is to describe an effective and eco-friendly adsorbent for the removal of aquatic micropollutants. The design of the cellulose-modified zinc oxide (ZnO) nanocomposite was successfully carried out by density functional calculations. The proposed structures of the constituent and composite materials were confirmed using formation energy (Ef), frontier orbitals, band gaps (Egap), density of state (DOS) plots, natural bond orbitals (NBO), and UV-Vis spectral analysis. The cellulose/(ZnO)12 composite was further used for the adsorption of different heavy metal ions such as Hg(II), Pb(II), Cd(II), Ni(II), and As(III) through calculation of electronic and optical properties. The values of the adsorption energy (Eads) show that the As(III) interacted better with the composite in both phases, i.e., gas (-806.98 kcal/mol) and aqueous (-491.66 kcal/mol). The analysis of frontier molecular orbital data exhibited a decrease in the Egap of composite@metal ion complexes. The high negative value of the solvation energies (ΔEsol) indicates the suitability of composite@metal ions in an aqueous environment. The nature of interactions between metal ions and the composite unit is analyzed by noncovalent interactions (NCI) and the quantum theory of atoms in molecules (QTAIM). The theoretical results of the present study show the feasibility of the cellulose/(ZnO)12 composite for the removal of heavy metal ions and provide useful information to experimentalists to treat contaminated water.

A novel magnetic adsorbent from activated carbon fiber and iron oxide nanoparticles for 2,4-D removal from aqueous medium

Carbonaceous materials have been widely applied as adsorbents, but there are some factors that affect their efficiency. In this context, advances in nanotechnology provide new and more efficient methodologies for water treatment. This study evaluated the efficiency of a novel carbon-based adsorbent developed from Brazilian polyacrylonitrile textile fiber and functionalized with iron oxide magnetic nanoparticles for the removal of 2,4-dichlorophenoxyacetic acid (2,4-D) from the aqueous medium. The synthesized adsorbent (ACF-Fe3O4) was characterized by FTIR, XRD, VSM, Zeta potential, SEM, EDX, and TEM. The characterization techniques showed that the adsorbent has peaks characteristic of its precursors and superparamagnetic characteristics, confirming the efficiency of the synthesis method. The adsorption tests evaluated the influence of adsorbent dosage, pH of the contaminant solution, contact time and temperature on the removal of 2,4-D. The experimental data were better adjusted by the pseudo-second order kinetic model and by the Langmuir isothermal model. The thermodynamic parameters revealed that the process is exothermic, spontaneous and thermodynamically favorable. Under the best experimental conditions, the maximum adsorption capacity obtained was 51.10 mg g-1 with an adsorbent concentration of 0.33 g L-1, natural pH of the solution, temperature of 288 K at the equilibrium time of six hours. Adsorbent reusage was studied in four desorption cycles. The adsorption mechanism can be explained through π-π bonds, hydrogen bonds and electrostatic interactions. The prepared material presented high-efficiency adsorption capacity of 2,4-D compared to other carbonaceous materials present in the literature, demonstrating its viability for the removal of this contaminant from the aqueous medium.

State-of-the-art adsorption and adsorptive filtration based technologies for the removal of trace elements: A critical review

Water and wastewater are contaminated with various types of trace elements that are released from industrial activities. Their presence, at concentrations above the permissible limit, will cause severe negative impacts on human health and the environment. Due to their cost-effectiveness, simple design, high efficiency, and selectivity, adsorption, and adsorptive filtration are techniques that have received lots of attention as compared to other water treatment techniques. Adsorption isotherms and kinetic studies help to understand the mechanisms of adsorption and adsorption rates, which can be used to develop and optimize different adsorbents. This state-of-the-art review provides and combines the advancements in different conventional and advanced adsorbents, biosorbents, and adsorptive membranes for the removal of trace elements from water streams. Herein, this review discusses the sources of different trace elements and their impact on human health. The review also covers the adsorption technique with a focus on various advanced adsorbents, their adsorption capacities, and adsorption isotherm modeling in detail. In addition, biosorption is critically discussed together with its mechanisms and biosorption isotherms. In the end, the application of various advanced adsorptive membranes is discussed and their comparison with adsorbents and biosorbents is systematically presented.

Extreme Ion-Transport Inorganic 2D Membranes for Nanofluidic Applications

Inorganic 2D materials offer a new approach to controlling mass diffusion at the nanoscale. Controlling ion transport in nanofluidics is key to energy conversion, energy storage, water purification, and numerous other applications wherein persistent challenges for efficient separation must be addressed. The recent development of 2D membranes in the emerging field of energy harvesting, water desalination, and proton/Li-ion production in the context of green energy and environmental technology is herein discussed. The fundamental mechanisms, 2D membrane fabrication, and challenges toward practical applications are highlighted. Finally, the fundamental issues of thermodynamics and kinetics are outlined along with potential membrane designs that must be resolved to bridge the gap between lab-scale experiments and production levels.

Mesoporous Materials for Metal-Laden Wastewater Treatment

Rapid technological, industrial and agricultural development has resulted in the release of large volumes of pollutants, including metal ions, into the environment. Heavy metals have become of great concern due to their toxicity, persistence, and adverse effects caused to the environment and population. In this regard, municipal and industrial effluents should be thoroughly treated before being discharged into natural water or used for irrigation. The physical, chemical, and biological techniques applied for wastewater treatment adsorption have a special place in enabling effective pollutant removal. Currently, plenty of adsorbents of different origins are applied for the treatment of metal-containing aqueous solution and wastewater. The present review is focused on mesoporous materials. In particular, the recent achievements in mesoporous materials' synthesis and application in wastewater treatment are discussed. The mechanisms of metal adsorption onto mesoporous materials are highlighted and examples of their multiple uses for metal removal are presented. The information contained in the review can be used by researchers and environmental engineers involved in the development of new adsorbents and the improvement of wastewater treatment technologies.

Synthesis and characterization of a novel N-rich porous organic polymer and its application as an efficient porous adsorbent for the removal of Pb(II) and Cd(II) ions from aqueous solutions

In this study, a novel N-rich triazine-based porous organic polymer (NR-POP) was synthesized via Schiff-base condensation. The structure of the synthesized porous polymer was identified using FT-IR, XRD, SEM, EDS, TEM, TGA, and BET analyses. The adsorption efficiency of this polymer was investigated for the removal of lead and cadmium ions pollutants. The adsorption processes of Pb(II) and Cd(II) metal ions by this polymer adsorbent were exothermic and matched by the Langmuir isotherm with a high correlation coefficient (R² = 0.9904, 0.9778), the maximum adsorption capacity (833.33, 178.57 mg g^-1), and the pseudo-second-order kinetic model. Furthermore, NR-POP showed an excellent adsorption selectivity for Pb(II) compared to Cd(II).

Adsorptive removal of dichlorophenoxyacetic acid (2,4-D) using novel nanoparticles based on cationic surfactant-coated titania nanoparticles

A novel nanomaterial based on cationic surfactant-coated TiO₂ nanoparticle (CCTN) was systematically fabricated in this work. Synthesized titania nanoparticles were thoroughly characterized by XRD, FT-IR, HR-TEM, TEM-EDX, SEM with EDX mapping, BET, and ζ potential measurements. The adsorption of cationic surfactant, cetyltrimethylammonium bromide (CTAB), on TiO₂ was studied under various pH and ionic strength conditions. Adsorption of CTAB on TiO₂ increased with ionic strength increment in the presence of hemimicelle monolayer structure, indicating that nonelectrostatic and electrostatic forces control CTAB uptake. CTAB adsorption isotherms on TiO₂ were according to a two-step model. Potential application in pesticide removal of 2,4-dichorophenoxy acetic acid (2,4-D) using CCTN was also studied. Optimum parameters for 2,4-D treatment through adsorption technique were pH 5, adsorption time of 120 min, and CCTN dosage of 10 mg·mL^-1. Very low 2,4-D removal efficiency using TiO₂ without CTAB coating was found to be approximately 28.5% whereas the removal efficiency was up to about 90% by using CCTN under optimum conditions, and the maximum adsorption capacity of 12.79 mg·g^-1 was found. Adsorption isotherms of 2,4-D on CCTN were more suitable with the Langmuir model than Freundlich. Adsorption mechanisms of 2,4-D on CCTN were mainly governed by Columbic attraction based on isotherms and surface charge changes.

Treatment of Mine Water with Reverse Osmosis and Concentrate Processing to Recover Copper and Deposit Calcium Carbonate

Mine water usually contains heavy metals and other inorganic and organic pollutants that contaminate water bodies. Reverse osmosis (RO) techniques are capable of producing purified water that meets discharge regulations. However, the problem of RO concentrate disposal and utilization is still not solved. The well-known zero liquid discharge (ZLD) process provides total concentrate utilization at the power industries but seems unreasonably expensive for the treatment of large amounts of mine water due to required chemical softening and the evaporation of concentrate. In the present article, a new approach to increase the recovery of reverse osmosis and to avoid high operational costs is demonstrated and discussed. The new technique involves radical RO concentrate flow reduction and withdrawal, together with dewatered sludge. The idea to "hide" concentrate in dewatered sludge is proposed and demonstrated during experiments. The article demonstrates results of the conducted experimental program aimed at reduction of volumes of all liquid wastes produced during mine water treatment using a new approach to concentrate it with a cascade of nanofiltration membranes and to reach a TDS value of 110-120 g per liter. The obtained concentrate is mixed with the wet sludge, which is further dewatered and withdrawn together with the dewatered sludge. Experiments are conducted that demonstrate a reduction in calcium in the concentrate due to deposition of calcium carbonate on the "seed crystals" in the circulation mode. Another distinguishing feature of the new technique is the separation of concentrate into two streams containing high concentrations of monovalent ions (sodium and ammonium chlorides) and divalent ions (calcium, magnesium and copper sulphates). Flow diagrams of the processes are presented to demonstrate the water treatment technique used to produce deionized water and two types of sludges: sludge after clarification and sludge after calcium carbonate deposition.

Synthesis and Characterization of Novel Thiosalicylate-based Solid-Supported Ionic Liquid for Removal of Pb(II) Ions from Aqueous Solution

The main objectives of this study are to synthesize a new solid-supported ionic liquid (SSIL) that has a covalent bond between the solid support, i.e., activated silica gel, with thiosalicylate-based ionic liquid and to evaluate the performance of this new SSIL as an extractant, labelled as Si-TS-SSIL, and to remove Pb(II) ions from an aqueous solution. In this study, 1-methyl-3-(3-trimethoxysilylpropyl) imidazolium thiosalicylate ([MTMSPI][TS]) ionic liquid was synthesized and the formation of [MTMSPI][TS] was confirmed through structural analysis using NMR, FTIR, IC, TGA, and Karl Fischer Titration. The [MTMSPI][TS] ionic liquid was then chemically immobilized on activated silica gel to produce a new thiosalicylate-based solid-supported ionic liquid (Si-TS-SSIL). The formation of these covalent bonds on Si-TS-SSIL was confirmed by solid-state NMR analysis. Meanwhile, BET analysis was performed to study the surface area of the activated silica gel and the prepared Si-TS-SSIL (before and after washing with solvent) with the purpose to show that all physically immobilized [MTMSPI][TS] has been washed off from Si-TS-SSIL, leaving only chemically immobilized [MTMSPI][TS] on Si-TS-SSIL before proceeding with removal study. The removal study of Pb(II) ions from an aqueous solution was carried out using Si-TS-SSIL as an extractant, whereby the amount of Pb(II) ions removed was determined by AAS. In this removal study, the experiments were carried out at a fixed agitation speed (400 rpm) and fixed amount of Si-TS-SSIL (0.25 g), with different contact times ranging from 2 to 250 min at room temperature. The maximum removal capacity was found to be 8.37 mg/g. The kinetics study was well fitted with the pseudo-second order model. Meanwhile, for the isotherm study, the removal process of Pb(II) ions was well described by the Freundlich isotherm model, as this model exhibited a higher correlation coefficient (R²), i.e., 0.99, as compared to the Langmuir isotherm model.

Efficient Biosorption of Hexavalent Chromium from Water with Human Hair

The triphenyl group (trityl radical) possessing three-phenyl rings, self-assembled through aromatic π-π stacking interactions, can form interesting crystalline organic nano-flowers. In this work, we have synthesized a hybrid material of 1,2-bis(tritylthio)ethane and magnetite, which reduces toxic Cr(VI) to non-toxic Cr(III). We validated the efficacy of the hybrid in reducing toxic Cr(VI) along with three other adsorbent systems. Among the five adsorbent systems tested, we observed that human hair has higher Cr removal efficiency, which prompted us to explore further using different mechanical forms of human hair. Pulverized hair (PH), hair powder (HP), and raw hair (RH) were evaluated by employing different reaction factors such as the adsorbent dose, pH, initial Cr(VI) concentration, and contact time. The comparative evaluation showed that PH has greater adsorption capacity (15.14 mg/g), followed by RH (13.27 mg/g) and HP (10.5 mg/g). While investigating the adsorption mechanism, we observed that it follows pseudo-second-order kinetics suggesting chemisorption. The Freundlich isotherm model fitted well for Cr(VI) adsorption by human hair, suggesting a multi-layered adsorption process. Overall, this study promises a cost-effective and eco-friendly bio-adsorbent for Cr(VI), which may be scaled up to design automated industrial waste disposal systems.

Polymer Membranes as Innovative Means of Quality Restoring for Wastewater Bearing Heavy Metals

The problem that has aroused the interest of this review refers to the harmful effect of heavy metals on water sources due to industrial development. In this respect, the review is aimed at achieving a literature survey on the outstanding results and advancements in membranes and membrane technologies for the advanced treatment of heavy metal-loaded wastewaters. Particular attention is given to synthetic polymer membranes, for which the proper choice of precursor material can provide cost benefits while ensuring good decontamination activity. Furthermore, it was also found that better removal efficiencies of heavy metals are achieved by combining the membrane properties with the adsorption properties of inorganic powders. The membrane processes of interest from the perspective of industrial applications are also discussed. A noteworthy conclusion is the fact that the main differences between membranes, which refer mainly to the definition and density of the pore structure, are the prime factors that affect the separation process of heavy metals. Literature studies reveal that applying UF/MF approaches prior to RO leads to a better purification performance.

Synthesis and characterization of graphene oxide/alginate and application of central composite design in the adsorption of Th(IV) on the nanobiocomposites

In this study, graphene oxide and aginate were used to synthesis of nanobiocomposites under different synthesis conditions and the used to investigate the adsorption properties of Th (IV) ions from aqueous solutions. BET surface area, SEM and TEM images, FT-IR spectrometry, XRD techniques were used for the characterization of the adsorbents. In batch adsorption experiments, parameters affecting the adsorption efficiency such as solution pH, contact time, Th (IV) concentration and temperature were investigated using central composite design (CCD). ANOVA (analysis) analysis at the 95% confidence interval of the model applied for the experimental design and the compatibility of this model with the experimental findings were examined. The relevance of the model for the nanobiocomposite prepared by the 1st method is that the P value is <0.05 and the model F value is 23.77 and 39.45 with the 2nd method, respectively. These results show that the regression for this method is statistically high. The correlation coefficient (R 2), which was 95.69% for the 1st method and 97.36% for the 2nd method, indicates a high coordination between the observed values and the estimated values. According to the CCD results, it has been observed that the main effects of the adsorption process with the materials obtained by the 1st method are in the direction of increasing the concentration, while pH, time and temperature do not have a statistically significant effect. In the adsorption process with the materials obtained by the 2nd method, it was observed that the concentration, time and temperature caused an increasing effect. Langmuir, Freundlich and Dubinin–Radushkevich isotherms were used to determine the adsorption model and the constants related to these isotherms were calculated. In addition, the adsorption process was also investigated in terms of thermodynamics.

The Effects of the Addition of Polyurethane-MgO Nanohybrids on the Mechanical Properties of Ordinary Portland Cement Paste

One of the most important methods of controlling the properties of concrete and cement-based materials is to control the rate and kinetics of cement hydration. In the present study, novel flexible polyurethane-decorated MgO nanohybrids were synthesized using a simple chemical method, added to cement paste in different amounts, and utilized as an effective mechanical performance-enhancing factor for cement paste. It was observed that by adding 3 wt% synthesized PU-MgO nanohybrids to cement paste, its mechanical properties were improved and its compressive strength and flexural strength were increased by up to 13% and 15%, respectively, compared to the plain cement, after 45 days. The effect mechanism of adding PU-MgO nanoparticles on the properties of the cement paste was investigated. The addition of PU-MgO nanohybrids increased the pozzolanic reactions and formed more C-S-H phases.

Electrospun tannin-rich nanofibrous solid-state membrane for wastewater environmental monitoring and remediation

Heavy metal, organic dyes, and bacterial contamination in water endanger human/animals' health, and therefore, the detection, adsorption, and capturing of contaminants are essential for environmental safety. Ligand-rich membranes are promising for sensors, adsorption, and bacterial decontamination. Herein, tannin (TA)-reinforced 3-aminopropyltriethoxysilane (APTES) crosslinked polycaprolactone (PCL) based nanofibrous membrane (PCL-TA-APTES) was fabricated via electrospinning. PCL-TA-APTES nanofibers possess superior thermal, mechanical, structural, chemical, and aqueous stability properties than the un-crosslinked membrane. It changed its color from yellowish to black in response to Fe^2+/3+ ions due to supramolecular iron-tannin network (FeTA) interaction. Such selective sensing has been noticed after adsorption-desorption cycles. Fe³⁺ concentration, solution pH, contact time, and ligand concentration influence FeTA coordination. Under optimized conditions followed by image processing, the introduced membrane showed a colorimetric linear relationship against Fe³⁺ ions (16.58 μM-650 μM) with a limit of detection of 5.47 μM. The PCL-FeTA-APTES membrane could restrain phenolic group oxidation and result in a partial water-insoluble network. The adsorption filtration results showed that the PCL-FeTA-APTES membrane can be reused and had a higher methylene blue adsorption (32.04 mg/g) than the PCL-TA-APTES membrane (14.96 mg/g). The high capture efficiency of nanocomposite against Fe³⁺-based S. aureus suspension than Fe³⁺-free suspension demonstrated that Fe³⁺-bounded bacterium adhered to the nanocomposite through Fe³⁺/TA-dependent biointerface interactions. Overall, high surface area, rich phenolic ligand, porous microstructure, and super-wetting properties expedite FeTA coordination in the nanocomposite, crucial for Fe^2+/3+ ions sensing, methylene blue adsorption-filtration, and capturing of Fe³⁺-bounded bacterium. These multifunctional properties could promise nanocomposite membrane practicability in wastewater and environmental protection.

Development of Adsorptive Materials for Selective Removal of Toxic Metals in Wastewater: A Review

Removal of toxic metals is essential to achieving sustainability in wastewater purification. The achievement of efficient treatment at a low cost can be seriously challenging. Adsorption methods have been successfully demonstrated for possession of capability in the achievement of the desirable sustainable wastewater treatment. This review provides insights into important conventional and unconventional materials for toxic metal removal from wastewater through the adsorption process. The importance of the role due to the application of nanomaterials such as metal oxides nanoparticle, carbon nanomaterials, and associated nanocomposite were presented. Besides, the principles of adsorption, classes of the adsorbent materials, as well as the mechanisms involved in the adsorption phenomena were discussed.

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.

Advances in biological methods for the sequestration of heavy metals from water bodies: A review

Pollution is a major concern of the modern era as it affects all the principal aspects of the environment, especially the hydrosphere. Pollution with heavy metals has unequivocally threatened aquatic bodies and organisms as these metals are persistent, non-biodegradable, and toxic. Heavy metals tend to accumulate in the environment and eventually in humans, which makes their efficient removal a topic of paramount importance. Treatment of metal-contaminated water can be done both via chemical and biological methods. Where remediation through conventional methods is expensive and generates a large amount of sludge, biological methods are favoured over older and prevalent chemical purification processes because they are cheaper and environment friendly. The present review attempts to summarise effective methods for the remediation of water contaminated with heavy metals. We concluded that in biological techniques, bio-sorption is among the most employed and successful mechanisms because of its high efficacy and eco-friendly nature.

Protein nanofibrils as versatile and sustainable adsorbents for an effective removal of heavy metals from wastewater: A review

Water is a valuable natural resource, which plays a crucial role in ecological survival as well as economic progress. However, the water quality has deteriorated in recent years as a result of urbanization, industrialization and human activities due to the uncontrolled release of industrial wastes, which can be extremely carcinogenic and non-degradable, in air, water and soil bodies. Such wastes showed the presence of organic and inorganic pollutants in high dosages. Heavy metals are the most obstinate contaminants, and they can be harmful because of having a variety of detrimental consequences to the ecosystem. The existing water treatment methods in many situations may not be sustainable or effective because of their high energy requirements and ecological impacts. In this review, state-of-the-art water treatment methods for the elimination of heavy metals with the help of protein nanofibrils are covered featuring a discussion on the strategies and possibilities of developing protein nanofibrils for the active elimination of heavy metals using kitchen waste as well as residues from the cattle, agriculture, and dairy industries. Further, the emphasis has been given to their environmental sustainability and economical aspects are also discussed.

Fabrication of Multi-Vacancy-Defect MWCNTs by the Removal of Metal Oxide Nanoparticles

This study aims to increase the specific surface area of multi-walled carbon nanotubes (MWCNTs) by forming and subsequently removing various metal oxide nanoparticles on them. We used facile methods, such as forming the particles without using a vacuum or gas and removing these particles through simple acid treatment. The shapes of the composite structures on which the metal oxide particles were formed and the formation of multi-vacancy-defect MWCNTs were confirmed via transmission electron microscopy and scanning electron microscopy. The crystallinity of the formed metal oxide particles was confirmed using X-ray diffraction analysis. Through specific surface area analysis and Raman spectroscopy, the number of defects formed and the degree and tendency of defect-formation in each metal were determined. In all the cases where the metal oxide particles were removed, the specific surface area increased, and the metal inducing the highest specific surface area was determined.

Advances in the application of immobilized enzyme for the remediation of hazardous pollutant: A review

Nowadays, ecofriendly, low-cost, and sustainable alternatives techniques have been focused on the effective removal of hazardous pollutants from the water streams. In this context, enzyme immobilization seems to be of specific interest to several researchers to develop novel, effective, greener, and hybrid strategies for the removal of toxic contaminants. Immobilization is a biotechnological tool, anchoring the enzymes on support material to enhance the stability and retain the structural conformation of enzymes for catalysis. Recyclability and reusability are the main merits of immobilized enzymes over free enzymes. Studies showed that immobilized enzyme laccase can be used up to 7 cycles with 66% efficiency, peroxidase can be recycled to 2 cycles with 50% efficiency, and also cellulase to 3 cycles with 91% efficiency. In this review, basic concepts of immobilization, different immobilization techniques, and carriers used for immobilization are summarized. In addition to that, the potential of immobilized enzymes as the bioremediation agents for the effective degradation of pollutants from the contaminated zone and the impact of different operating parameters are summarized in-depth. Further, this review provides future trends and challenges that have to be solved shortly for enhancing the potential of immobilized systems for large-scale industrial wastewater treatment.

Easy, Fast, Selective, and Simultaneous Separation of Hg(II) and Oil via Loofah-Sponge-Inspired Hierarchically Porous Membranes

In this work, Cu2Se/Cu membranes (CSMs) of hierarchical pores were fabricated via chemical dissolution of Cu and Se followed by redeposition of cuprous selenide (Cu2Se) on copper membranes (CMs), and applied for adsorption/removal/separation of Hg(II) among a variety of interfering metal ions. The CSM demonstrates the best comprehensive performance among previous Hg(II) adsorption membranes, having high selectivity (KHg/M = 2.9 × 104-3.0 × 105), high efficiency (>99%, 5 s to 3 min), high adsorption capacity (505 mg/g), and high flux (2.0 × 106 L m-2 h-1). Meanwhile, effects of Hg(II) concentration, flow rate, and the number of membrane layers and adsorption cycles were also investigated on the removal of Hg(II). Moreover, a Cu2Se/Cu membrane-plasma (CSM-p) with superhydrophilicity/underwater superoleophobicity was prepared on the basis of CSM, and simultaneous removal of Hg(II) and oil was realized by using CSM and CSM-p in combination. This work not only provides a new reference for design of highly selective, efficient metal ion adsorption/enrichment/separation materials but also presents a novel approach to the removal/enrichment/separation of multiple complex contaminants by the combination of different functional membranes.

Graphene Oxide-Chitosan Network on a Dialysis Cellulose Membrane for Efficient Removal of Organic Dyes

Currently, water pollution is a significant health problem for both humans and animals due to large amounts of dye-containing wastewater. Thus, polymer composite membranes (PCMs) are considered as efficient adsorption/filtration membranes that can be utilized for removing organic dyes from contaminated water/wastewater. In this study, the goal is to explore the modification of the interfacial dialysis cellulose (DC) surface through molecular interactions of an active graphene oxide-chitosan (GO-CTS) composite hydrogel (GCCH) network without the use of an external cross-linker toward an effective dye removal ability using a simple casting process and a low-cost adsorption technique, resulting in the formation of a PCM, i.e., GO/CTS/DC membrane (GCD-mems). Concomitantly, the incorporation of the GCCH network (as an active hybrid network) and DC (as a supporting material) is considered as a promising approach toward a dye-removing PCM. As a result, the GCD-mems showed that cellulose robustly interacted via the chemical bonds of the GCCH network by maintaining the three-dimensional (3D) porous layer structures, and the functional surface of the membrane was enhanced toward specific groups for an effective dye removal approach. In addition, there is a significant improvement in dye removal performance after modification of the interfacial DC surface through molecular interactions of GCCH, i.e., high adsorption capacities of cationic and anionic dye molecules on the GCD-mems, compared to the relevant GO-based adsorbents. Also, the dye flux and rejection of the GCD-mems can simultaneously remove both methylene blue and Congo red. In the adsorption, it is appropriate with the pseudo-second-order and Langmuir models corresponding to chemical adsorption and monolayer approaches, as well as physical sieving through the 3D layers of porous channels of GCD-mems during the filtration process. Moreover, the structural stability and sustainability of the PCMs are enhanced during the recycling process, and the use of ethanol in the recycling process further simplifies the process and reduces the cost of the PCMs. Thus, the GCD-mems are encouraged as potential candidates that can be applied directly in the removal of dyes from the wastewater of textile industries or selective dialysis applications.

Why reuse spent adsorbents? The latest challenges and limitations

Despite the abundance of published reviews over the last few years, the inconsistent data representation in regards to the use of adsorbents in each work, renders the task of comparing them challenging. Disposing the adsorbent may have adverse environmental impact, which should be mitigated through regeneration and reuse processes, such as desorption. This review discusses how the importance of desorption and regeneration equates that of the adsorption stage, and presents various regeneration methods as well as the influencing parameters, advantages, and disadvantages thereof. For the purposes of this work, the adsorbents have been categorized into four groups: (i) graphene, (ii) carbon nanotubes, (iii) activated carbon compounds and (iv) clays and polymer adsorbents as representatives in order to further study their desorption and regeneration abilities, using a variety of desorption media/eluants. The process conditions, such as pH, dose required, concentration, adsorption ability and the cost of the adsorbents were examined for further analysis. The recovery efficiency and ability to get reused through the desorption process was also evaluated. The highest adsorption capacity was observed for graphene-based adsorbents reaching between 108 and >480 mg/g, and for activated carbon materials ranging from 34 to >384 mg/g, whereas carbon nanotubes and polymer-based adsorbents indicated rather low and greatly varying adsorption capacities, between 1 and >138 mg/g and between 7 and >57 mg/g, respectively. Most of the reviewed cases appear to fit the pseudo-second order (PSO) kinetic model. These materials have demonstrated a removal effectiveness between 71% and 99%. Overall, all the aforementioned adsorbents share the advantage of being highly reusable.

Mechanism underlying how a chitosan-based phosphorus adsorbent alleviates cadmium-induced oxidative stress in Bidens pilosa L. and its impact on soil microbial communities: A field study

In the present study, field experiments were conducted in Side village, Yangshuo, Guilin, Guangxi Province, China, using four C-BPA application levels (control (0 mg m^-2), T1 (100 mg m^-2), T2 (200 mg m^-2) and T3 (400 mg m^-2)) to clarify the mechanism by which a chitosan-based phosphorus adsorbent (C-BPA) applied as a passivator helps Bidens pilosa L. (B. pilosa L.) alleviate cadmium (Cd)-induced oxidative stress in Cd-contaminated soil. In the aqueous phase, C-BPA successfully adsorbed Cd²⁺ on the surface primarily via ion exchange, and C-BPA has potential Cd²⁺ adsorption capacity, enabling its use as a passivator in real Cd-contaminated environments. In Cd-contaminated soils, under C-BPA application at the T3 level, the pH value increased by 11.2%, and the acid-soluble form of Cd decreased by 26.5%. Additionally, the application of C-BPA improved the rhizosphere soil environment and impacted the soil microbial community diversity and structure. Among soil microbes, the soil fungal community was more sensitive than bacteria to C-BPA application. Dehydrogenase, acetic acid, soil pH and Eurotiomycetes or Dothideomycetes significantly impacted Cd accumulation in the leaves of B. pilosa L.; Cd accumulation in leaves was decreased by 68.1% under C-BPA application at the T3 level. Additionally, the variation of increased catalase (CAT) and peroxidase (POD) jointly promoted plant growth; the plant weight was increased by 112.7% under the C-BPA application at the T3 level. Notably, the production of CAT and POD by B. pilosa L. was more effective than the synthesis of glutathione (GSH) in helping B. pilosa L. eliminate excess reactive oxygen species (ROS). Therefore, our findings demonstrated that the application of C-BPA to Cd-contaminated soil can greatly improve the rhizosphere soil environment, help B. pilosa L. eliminate ROS and promote plant growth.

Effects of Mn(II) addition on Cd(II) removal by hydrated manganese dioxide

In this study, the redox homogeneous precipitation method was applied to synthesize hydrated manganese dioxide (HMO) and to study the removal performance of Cd(II) from wastewater. Moreover, a small amount of Mn(II) could still combine with HMO without causing the desorption of Cd(II). A novel discovery was that the synergistic effect of KMnO₄ and Mn(II) could directly regenerate MnO₂ to deeply remove Cd(II), realizing the recycling of MnO₂. The influence of Mn(II) addition on the adsorption behavior of Cd(II) was discussed in terms of pH, Mn(II) addition mode, initial concentration of Mn(II) or Cd(II), and contact time. The adsorption of Cd(II) on HMO could be better in line with the Langmuir model, while that of Mn(II) accorded with the Freundlich model. The pseudo-second-order kinetic fitting results indicated that the removal of Cd(II) and Mn(II) on HMO belonged to chemisorption. SEM, XRD, FTIR, and XPS analysis demonstrated that Cd(II) was trapped by forming an inner-sphere complex on HMO, and the added Mn(II) and KMnO₄ could regenerate MnO₂ through oxidation-reduction reaction, wrapping outside of Cd(II) for a purpose of deep removal of Cd(II). HIGHLIGHTS: 1)A small amount of Mn(II) can bind to HMO without causing Cd(II) desorption 2)A large amount of Mn(II) can cause partial desorption of Cd(II) 3)Large amount of Mn(II) will partially bind to the surface of HMO or Cd(II) complexes 4)Deeply remove Cd(II) without eluting and regenerating HMO.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Influence of Different Microplastic Forms on pH and Mobility of Cu2+ and Pb2+ in Soil

Microplastics, due to their surface properties, porosity and electrostatic interactions have a high affinity for cations sorption from the aqueous phase. As soil is a complex matrix, interactions between microplastics, soil constituents and heavy metals (HM) may modify the soil microenvironment for heavy metal mobilization/immobilization processes. In order to better understand the problem, three commonly found forms of microplastics in soil (fibers, fragments and microbeads) were mixed with Cu²⁺- or Pb²⁺-contaminated soil and incubated at 22 °C for 180 days. In soil samples pH and the content of water and acid exchangeable species of metals were analyzed. The results of this study showed that the presence of microplastics in HM-contaminated soil affected metal speciation, increasing the amount of easily exchangeable and potentially bioavailable forms of Cu²⁺ or Pb²⁺ in the tested soil. Soil pH also increased, confirming that microplastic particles affect soil properties relevant to the sorption/desorption process of metal cations. Overall, the smallest microplastic particles (≤1 mm), such as fibers or glitter microbeads, had a greater impact on the change in the sorption and desorption conditions of metals in tested soil than larger particles. The findings of our study show that microplastic form, shape and size should be considered as important factors that influence the soil properties and mobility of heavy metals in soil.

Functionalised electrospun membranes (TETA-PVC) for the removal of lead(ii) from water

Driven by the need for delivering sustainable water purification solutions for the removal of heavy metals from water, electrospun PVC membranes were functionalised with triethylenetetramine (TETA) and were used to remove lead(ii) ions selectively from water. The membranes were characterised and their adsorption behavior towards the removal of lead from water was investigated. The incorporation of TETA on the membrane's surface significantly improved the removal efficiency of lead(ii) up to 99.8% in 30 minutes and under ambient conditions, with the lowest concentration of 50 ppm. The adsorption mechanism was investigated and kinetic data showed a better correlation with the pseudo-second-order model. Similarly, the equilibrium data best fitted with the Langmuir adsorption isotherm model with a relatively high maximum adsorption capacity of 1250 mg g⁻¹ for lead(ii) ions, larger than recently reported adsorption capacities for similar membranes. The functionalised membrane also showed high selectivity to lead(ii) in a mixed solution containing lead(ii), mercury(ii), cadmium(ii), arsenic(iii), copper(ii), and zinc(ii). The functionalised membrane was regenerated, where desorption of lead(ii) was achieved, under mildly acidic conditions. The removal efficiency of the regenerated membrane after six cycles of adsorption/desorption was maintained at a high level of 98%. The proposed design offers a simple yet effective, sustainable, and environmentally friendly solution for water treatment.

Driven by the need for delivering sustainable water purification solutions for the removal of heavy metals from water, TETA functionalised electrospun PVC membranes were fabricated and used to remove lead(ii) ions selectively from water.

Enhanced Specific Mechanism of Separation by Polymeric Membrane Modification-A Short Review

Membrane technologies have found a significant application in separation processes in an exceeding range of industrial fields. The crucial part that is decided regarding the efficiency and effectivity of separation is the type of membrane. The membranes deal with separation problems, working under the various mechanisms of transportation of selected species. This review compares significant types of entrapped matter (ions, compounds, and particles) within membrane technology. The ion-exchange membranes, molecularly imprinted membranes, smart membranes, and adsorptive membranes are investigated. Here, we focus on the selective separation through the above types of membranes and detect their preparation methods. Firstly, the explanation of transportation and preparation of each type of membrane evaluated is provided. Next, the working and application phenomena are evaluated. Finally, the review discusses the membrane modification methods and briefly provides differences in the properties that occurred depending on the type of materials used and the modification protocol.

A Review on Promising Membrane Technology Approaches for Heavy Metal Removal from Water and Wastewater to Solve Water Crisis

Due to the impacts of water scarcity, the world is looking at all possible solutions for decreasing the over-exploitation of finite freshwater resources. Wastewater is one of the most reliable and accessible water supplies. As the population expands, so do industrial, agricultural, and household operations in order to meet man’s enormous demands. These operations generate huge amounts of wastewater, which may be recovered and used for a variety of reasons. Conventional wastewater treatment techniques have had some success in treating effluents for discharge throughout the years. However, advances in wastewater treatment techniques are required to make treated wastewater suitable for industrial, agricultural, and household use. Diverse techniques for removing heavy metal ions from various water and wastewater sources have been described. These treatments can be categorized as adsorption, membrane, chemical, or electric. Membrane technology has been developed as a popular alternative for recovering and reusing water from various water and wastewater sources. This study integrates useful membrane technology techniques for water and wastewater treatment containing heavy metals, with the objective of establishing a low-cost, high-efficiency method as well as ideal production conditions: low-cost, high-efficiency selective membranes, and maximum flexibility and selectivity. Future studies should concentrate on eco-friendly, cost-effective, and long-term materials and procedures.

Functionalized silica nanoparticles: classification, synthetic approaches and recent advances in adsorption applications

Nanotechnology is rapidly sweeping through all the vital fields of science and technology such as electronics, aerospace, defense, medicine, and catalysis. It involves the design, synthesis, characterization, and applications of materials and devices on the nanometer scale. At the nanoscale, physical and chemical properties differ from the properties of the individual atoms and molecules of bulk matter. In particular, the design and development of silica nanomaterials have captivated the attention of several researchers worldwide. The applications of hybrid silicas are still limited by the lack of control on the morphology and particle size. The ability to control both the size and morphology of the materials and to obtain nano-sized silica particles has broadened the spectrum of applications of mesoporous organosilicas and/or has improved their performances. On the other hand, adsorption is a widely used technique for the separation and removal of pollutants (metal ions, dyes, organics,...) from wastewater. Silica nanoparticles have specific advantages over other materials for adsorption applications due to their unique structural characteristics: a stable structure, a high specific surface area, an adjustable pore structure, the presence of silanol groups on the surface which allow easy modification, less environmental harm, simple synthesis, low cost, etc. Silica nanoparticles are potential adsorbents for pollutants. We present herein an overview of the different types of silica nanoparticles going from the definitions to properties, synthetic approaches and the mention of potential applications. We focus mainly on the recent advances in the adsorption of different target substances (metal ions, dyes and other organics).