A rapid extraction procedure of human hair proteins and identification of phosphorylated species

Exploring keratin composition variability for sustainable thermal insulator design

In pursuing sustainable thermal insulation solutions, this study explores the integration of human hair and feather keratin with alginate. The aim is to assess its potential in thermal insulation materials, focusing on the resultant composites' thermal and mechanical characteristics. The investigation uncovers that the type and proportion of keratin significantly influence the composites' porosity and thermal conductivity. Specifically, higher feather keratin content is associated with lesser sulfur and reduced crosslinking due to shorter amino acids, leading to increased porosity and pore sizes. This, in turn, results in a decrease in β-structured hydrogen bond networks, raising non-ordered protein structures and diminishing thermal conductivity from 0.044 W/(m·K) for pure alginate matrices to between 0.033 and 0.038 W/(m·K) for keratin-alginate composites, contingent upon the specific ratio of feather to hair keratin used. Mechanical evaluations further indicate that composites with a higher ratio of hair keratin exhibit an enhanced compressive modulus, ranging from 60 to 77 kPa, demonstrating the potential for tailored mechanical properties to suit various applications. The research underscores the critical role of sulfur content and the crosslinking index within keratin's structures, significantly impacting the thermal and mechanical properties of the matrices. The findings position keratin-based composites as environmentally friendly alternatives to traditional insulation materials.

Melanin-mediated accumulation of polycyclic aromatic hydrocarbons in human hair: Insights from biomonitoring and cell exposure studies

While human hair is widely used to monitor micro-organic contaminants (MOCs), their incorporation mechanisms are poorly understood. Melanin, known to facilitate the accumulation of drugs in hair, hasn't been studied in the field of MOCs. Here, polycyclic aromatic hydrocarbons (PAHs), a class of priority MOCs, were investigated through hair biomonitoring as well as cell exposure experiments. PAH concentrations and melanin contents were measured in black and white hairs from the same individual. The results showed that five dominant PAHs (phenanthrene, fluoranthene, pyrene, benzo[a]anthracene and chrysene) in black hair (0.66 ng/g - 35.1 ng/g) were significantly higher than those in white hair (0.52 ng/g - 29.6 ng/g). Melanin contents in black hair (14.9 - 48.9 ng/g) were markedly higher than in white hair (0.35 - 2.15 ng/g) and were correlated to PAH concentrations, hinting melanin-mediated accumulation of PAHs in hair. The in vitro experiment using murine melanoma cells demonstrates that PAH levels in cells were affected by melanin, suggesting the affinity of melanin to PAHs. Both biomonitoring and cell exposure experiment implicate the pivotal role of melanin in PAH accumulation in hair. Therefore, to ensure the accuracy of hair biomonitoring for MOCs, attention must be paid to the melanin content uniformity.

Human keratin matrices promote wound healing by modulating skin cell expression of cytokines and growth factors

A wide variety of biomaterials has been developed to assist in wound healing, including acellular animal and human-derived protein matrices. However, millions of patients worldwide still suffer from non-healing chronic wounds, demonstrating a need for further innovation in wound care. To address this need, a novel biomaterial, the human keratin matrix (HKM), was developed, characterised, and tested in vitro and in vivo. HKM was found to be degradation-resistant, and a proteomics analysis showed it to be greater than 99% human keratin proteins. PCR revealed adult human epidermal keratinocytes (HEKa) grown in contact with HKM showed increased gene expression of keratinocyte activations markers such as Epidermal Growth Factor (EGF). Additionally, a cytokine microarray demonstrated culture on HKM increased the release of cytokines involved in wound inflammatory modulation by both HEKa cells and adult human dermal fibroblasts (HDFa). Finally, in a murine chronic wound model, full-thickness wounds treated weekly with HKM were smaller through the healing process than those treated with human amniotic membrane (AM), bovine dermis (BD), or porcine decellularized small intestinal submucosa (SIS). HKM-treated wounds also closed significantly faster than AM- and SIS-treated wounds. These data suggest that HKM is an effective novel treatment for chronic wounds.

Keratin as an effective coating material for in vitro stem cell culture, induced differentiation and wound healing assays

The utilization of stem cells in tissue engineering holds great promise as efficient tools for tissue regeneration and in treating numerous musculoskeletal diseases. However, several limiting factors, such as precise delivery and control of differentiation of these stem cells as well as mimicking the microenvironment required to modulate stem cell behaviour in-vivo, have given rise to an urgent need for the development of new biomaterials which could be tailored to enhance cell renewal and/or direct cell fates. Keratin-rich biological materials offer several advantages, such as biocompatibility, tailorable mechanical properties, huge bioavailability, non-toxicity, non-immunogenic, and intrinsic tissue repair and/or regeneration capabilities, which makes them highly valued. In the present work, we report the preparation of keratin-based bio-materials from goat hair waste and its effectiveness as a coating material for in vitro culture and induced differentiation of mesenchymal stem cells (MSC's) and primary goat fibroblast cells. Since no known keratinase enzymes are expressed as such in human and/or animal systems, these keratin biomaterials could be used to slow the rate of degradation and deliver keratin-loaded stem cell scaffolds to induce their directed differentiation in vivo. The generated keratin materials have been characterized for surface morphology, protein structures, size and other properties using SDS-PAGE, LC/MS-MS, SEM, FTIR etc. Also, in vitro cell culture assays such as cell adhesion, viability using MTT, live dead assays, differentiation assays and in vitro scratch/wound healing assays were performed. Our results provide important data supporting tissue engineering applications of these keratinous biomaterials by combining the unique biological characteristics of goat hair-derived keratin material with the regenerative power of stem cells and their combinatorial use in applications such as disease treatment and injury repair as well as their use in the preparation of wound healing products, such as dressings and bandages, for management of clinical care in animals.

Production and characterization of human hair keratin bioplastic films with novel plasticizers

Since their invention, conventional plastics have contributed in the betterment of the society in numerous ways, nevertheless their deleterious impacts on the natural ecosystems and living creatures is irrefutable. The management of plastic waste generated is a concern worldwide and therefore quest for the plastic alternates or bioplastics is imminent. Here, we explore the suitability of keratin from human hair waste as the candidate for the production of bioplastic films. Keratin extracted from hair was used to form the films or 'kertics' by solution casting and curing. Ethanediol, di-ethylene glycol and tri-ethylene glycol were used as novel plasticizers along with glycerol in the keratin film formation. The film prepared were of the thickness 190-220 µm with the area of about 4.54 ± 0.2 cm2. Water uptake by G100, ED100, DEG100 and TEG100 films was recorded to be 4.8, 6.2, 4.9 and 6.3% respectively. FESEM analysis revealed that the films with 100 µl of 1% glycerol (G100) had continuous surface morphology except few pits of 0.1 µm, also DEG100 and TEG100 films have the most uniform surface morphology with no evident pits, holes or bulges. X-ray diffractogram showed characteristic peak of keratin at 19.5° and the d-spacing value observed was 0.45 nm. The FTIR studies suggested that the films retained keratin in non degraded form, and possessed the characteristic Amide peaks. The films were also found to be biodegradable in studies involving keratinophilic fungal strain of A. oryzae. These films could found potential applications in packaging industry, disposable items manufacturing and biomaterial generation.

Investigation of human hair keratin-based nanofibrous scaffold for skin tissue engineering application

Keratin-based nanofibers were fabricated using the electrospinning technique, and their potential as scaffolds for tissue engineering was investigated. Keratin, extracted from the human hair, was blended with poly(vinyl alcohol) (PVA) in an aqueous medium. Morphological characterizations of the fabricated PVA-keratin nanofiber (PK-NF) random and aligned scaffolds performed using a scanning electron microscope (SEM) revealed the formation of uniform and randomly oriented nanofibers with an interconnected three-dimensional network structure. The mean diameter of the nanofibers ranged from 100 to 250 nm. Functional groups and structural studies were done by infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. FTIR study suggested that PVA interacted with keratin by hydrogen bonding. Moreover, the in vitro cell culture study could suggest that PK-NF scaffolds were non-cytotoxic by supporting the growth of murine embryonic stem cells (ESCs), human keratinocytes (HaCaT), and dermal fibroblast (NHDF) cell lines. Further, the immunocytochemical characterization revealed the successful infiltration, adhesion, and growth of ESCs, HaCaT, and NHDF cells seeded on PK-NF scaffolds. However, there was no noteworthy difference observed concerning cell growth and viability irrespective of the random and aligned internal fibril arrangement of the PK-NF scaffolds. The infiltration and growth pattern of HaCaT and NHDF cells adjacent to each other in a 3D co-culture study mimicked that of epidermal and dermal skin cells and indeed underscored the potential of PK-NFs as a scaffold for skin tissue engineering.

In Situ Synthesis of Keratin and Melanin Chromophoric Submicron Particles

In humans, melanin plays an esthetic role, dictating hair and skin color and traits, while keratin is the protein that comprises most of the epidermis layer. Eumelanin and pheomelanin are types of melanin synthesized from the same building blocks via enzymatic oxidation. Pheomelanin has an additional building block, cysteine amino acid, which affects its final structure. Keratin contains high cysteine content, and by exploiting free thiols in hydrolyzed keratin, we demonstrate the formation of keratin-melanin (KerMel) chromophoric submicron particles. Cryo-TEM analyses found KerMel particle sizes to be 100-300 nm and arranged in the form of a central keratin particle with polymerized l-dopa chains. Attenuated total reflection (ATR)-FTIR, UV-vis, and fluorescence measurements identified new chemical bonds, indicating the formation of KerMel particles. Finally, KerMel replicated natural skin tones and proved cytocompatibility for human epidermal keratinocytes at concentrations below 0.1 mg/mL. Taken together, KerMel is a novel, tunable material that has the potential to integrate into the cosmetic industry.

An in vitro analysis of the hemostatic efficacy of fibrinogen precipitation with varied keratin fraction compositions

In preclinical studies, human hair has demonstrated effective hemostatic properties, potentially attributed to keratin proteins facilitating rapid conversion of fibrinogen to fibrin during coagulation. However, the rational use of human hair keratin for hemostasis remains unclear, given its complex mixture of proteins with diverse molecular weights and structures, leading to variable hemostatic capacity. To optimize the rational utilization of human hair keratin for hemostasis, we investigated the effects of different keratin fractions on keratin-mediated fibrinogen precipitation using a fibrin generation assay. Our study focused on high molecular weight keratin intermediate filaments (KIFs) and lower molecular weight keratin-associated proteins (KAPs) combined in various ratios during the fibrin generation. Scanning electron microscope analysis of the precipitates revealed a filamentous pattern with a broad distribution of fiber diameters, likely due to the diversity of keratin mixtures involved. An equal proportion of KIFs and KAPs in the mixture yielded the most extensive precipitation of soluble fibrinogen in an in vitro study, potentially due to structure-induced exposure of active sites. However, all hair protein samples exhibited diverse catalytic behaviors compared to thrombin, highlighting the potential of utilizing specific hair fractions to develop hair protein-based hemostatic materials with optimized capacity.

Keratin films for ocular surface reconstruction: Wound healing in an in-vivo model

The most commonly used tissue substitute for ocular surface reconstruction is human amniotic membrane (AM). Because of its low biomechanical strength and intransparency there is a need to search for alternatives of consistent quality. This study, further explored the biocompatibility of Keratin Film (KF) and its ability to sustain corneal epithelial wound healing. In three equal groups of 5 New Zeeland white rabbits a 4 mm superficial keratectomy was created in the right eye. Five eyes received a KF, five a human AM graft and the remaining five no implant. All eyes were treated with ofloxacin and dexamethasone eye drops and followed up for 10 days. Corneal fluorescein staining, vascularization, and transparency were assessed using slit lamp biomicroscopy according to a standardized grading score during and at the end of follow-up. The corneal-scleral-button was excised and processed for histology. After 10 days all eyes which had received a KF showed complete epithelial healing and no signs of neovascularization. In the AM group 1 eye showed a persistent epithelial defect at day 10 and 2 eyes showed neovascularization at day 7 resolving at day 10. Transparency improved progressively both in the KF group as well as in the AM group towards the end of the follow. Histology showed a multilayer epithelium firmly adherent to the KF with no evidence of keratocyte migration or inflammatory reaction in the corneal stroma. In this study on rabbit eyes KF better supported corneal epithelial wound healing than amniotic membrane.

Novel PLCL nanofibrous/keratin hydrogel bilayer wound dressing for skin wound repair

In this study, a novel poly(L-lactate-caprolactone) copolymer (PLCL) nanofibrous/keratin hydrogel bilayer wound dressing loaded with fibroblast growth factor (FGF-2) was prepared by the low-pressure filtration-assisted method. The ability of the keratin hydrogel in the bilayer dressing to mimic the dermis and that of the nanofibrous PLCL to mimic the epidermis were discussed. Keratin hydrogel exhibited good porosity and maximum water absorption of 874.09%. Compared with that of the dressing prepared by the coating method, the interface of the bilayer dressing manufactured by the low-pressure filtration-assisted method (filtration time: 20 min) was tightly bonded, and its bilayer dressing interface could not be easily peeled off. The elastic modulus of hydrogel was about 44 kPa, which was similar to the elastic modulus of the dermis (2-80 kPa). Additionally, PLCL nanofibers had certain toughness and flexibility suitable for simulating the epidermal structures. In vitro studies showed that the bilayer dressing was biocompatible and biodegradable. In vivo studies indicated that PLCL/keratin-FGF-2 bilayer dressing could promote re-epithelialization, collagen deposition, skin appendages (hair follicles) regeneration, microangiogenesis construction, and adipose-derived stem cells (ADSCs) recruitment. The introduction of FGF-2 resulted in a better repair effect. The bilayer dressing also solved the problems of poor interface adhesion of hydrogel/electrospinning nanofibers. This paper also explored the preliminary role and mechanism of bilayer dressing in promoting skin healing, showing that its potential applications as a biomedical wound dressing in the field of skin tissue engineering.

Efficient Biosorption of Hexavalent Chromium from Water with Human Hair

The triphenyl group (trityl radical) possessing three-phenyl rings, self-assembled through aromatic π-π stacking interactions, can form interesting crystalline organic nano-flowers. In this work, we have synthesized a hybrid material of 1,2-bis(tritylthio)ethane and magnetite, which reduces toxic Cr(VI) to non-toxic Cr(III). We validated the efficacy of the hybrid in reducing toxic Cr(VI) along with three other adsorbent systems. Among the five adsorbent systems tested, we observed that human hair has higher Cr removal efficiency, which prompted us to explore further using different mechanical forms of human hair. Pulverized hair (PH), hair powder (HP), and raw hair (RH) were evaluated by employing different reaction factors such as the adsorbent dose, pH, initial Cr(VI) concentration, and contact time. The comparative evaluation showed that PH has greater adsorption capacity (15.14 mg/g), followed by RH (13.27 mg/g) and HP (10.5 mg/g). While investigating the adsorption mechanism, we observed that it follows pseudo-second-order kinetics suggesting chemisorption. The Freundlich isotherm model fitted well for Cr(VI) adsorption by human hair, suggesting a multi-layered adsorption process. Overall, this study promises a cost-effective and eco-friendly bio-adsorbent for Cr(VI), which may be scaled up to design automated industrial waste disposal systems.

Singh. Comparative study of morphology and keratin levels in hair from deer and goat

Hair is a defining character of mammals. In the present study, the hair samples of Chital Axis axis, Sambar Deer Rusa unicolor, and goat Capra hircus were collected from the back, neck, abdomen and tail regions of carcasses brought to the forensic laboratory for necropsy examinations. Cross-sections of hair, cuticle scale, and medullary patterns were analyzed to establish indices for species identification. Keratin levels were also analyzed by protein electrophoresis (SDS-PAGE). We determined that both microscopic and SDS-PAGE analysis of guard hair is useful for identifying species, particularly in forensic applications.

Cross-Linked Gamma Polyglutamic Acid/Human Hair Keratin Electrospun Nanofibrous Scaffolds with Excellent Biocompatibility and Biodegradability

Recently, human hair keratin has been widely studied and applied in clinical fields due to its good histocompatibility, biocompatibility, and biodegradability. However, the regenerated keratin from human hair cannot be electrospun alone because of its low molecular weight. Herein, gamma polyglutamic acid (γ-PGA) was first selected to fabricate smooth and uniform γ-PGA/keratin composite scaffolds with excellent biocompatibility and biodegradability by electrospinning technology and a chemical cross-linking method in this study. The effect of electrospinning parameters on the structure and morphology, the mechanism of chemical cross-linking, biocompatibility in vitro cell culture experiments, and biodegradability in phosphate-buffered saline buffer solution and trypsin solution of the γ-PGA/keratin electrospun nanofibrous scaffolds (ENS) was studied. The results show that the cross-linked γ-PGA/keratin ENSs had excellent water stability and biodegradability. The γ-PGA/keratin ENSs showed better biocompatibility in promoting cell adhesion and cell growth compared with the γ-PGA ENSs. It is expected that γ-PGA/keratin ENSs will be easily and significantly used in tissue engineering to repair or regenerate materials.

Reverse engineering of a wool fibre to mimic the structural hierarchy of a gecko's foot

The adhesion generated by a gecko's foot is realised by a structural hierarchy that is also present inside the cortex of a wool fibre. Both structures are based on the same fibril building blocks that belong to theα-keratin family. We show here that this hierarchical structure can be released from a Merino wool fibre with a combination of formic acid refluxing with agitation and trypsin digestion with ultrasonication. Thus, the cuticle scales are shown to be removed from wool yarns by mass-loss, FTIR spectroscopy and SEM followed by the breakdown of the cortex to release macrofibrils at the surface of the remaining yarn. SEM and AFM evidence are presented for the exposure of macrofibrils at the surface of cross-sections of descaled, fibrillated wool fibres. Adhesion measurements in the AFM show that regions of the treated wool have high adhesion, up to 58 nN, consistent with exposure of nanoscale macrofibrils. This exposure is not however homogeneous across the entirety of the cross-sectioned surface of a yarn and further digestion is required to optimise the depth profile of the exposure for direct comparison with the macroscale compliance and adhesion of a gecko's foot. Nonetheless, the current work has developed an experimental route to reserve engineer wool back to sub-unit macrofibrils, in order to replicate the format and to some extent the adhesive properties of a gecko's hierarchal foot structure.

Valorization of Human Hair and Its Derivatives in Tissue Engineering: A Review

Human hair is a potential biomaterial for biomedical applications. Improper disposal of human hair may pose various adverse effects on the environment and human health. Therefore, proper management of human hair waste is pivotal. Human hair fiber and its derivatives offer various advantages as biomaterials such as biocompatibility, biodegradability, low toxicity, radical scavenging, electroconductivity, and intrinsic biological activity. Therefore, the favorable characteristics of human hair have rendered its usage in tissue engineering (TE) applications including skin, cardiac, nerve, bone, ocular, and periodontal. Moreover, the strategies by utilizing human hair as a biomaterial for TE applications may reduce the accumulation of human hair. Thus, it also improves human hair waste management while promoting natural, environmental-friendly, and nontoxic materials. Furthermore, promoting sustainable materials production will benefit human health and well-being. Hence, this article reviews and discusses human hair characteristics as sustainable biomaterials and their recent application in TE applications. Impact Statement This review article highlights the sustainability aspects of human hair as raw biomaterials and various elements of human hair that could potentially be used in tissue engineering (TE) applications. Furthermore, this article discusses numerous benefits of human hair, highlighting its value as biomaterials in bioscaffold development for TE applications. Moreover, this article reviews the role and effect of human hair in various TE applications, including skin, cardiac, nerve, bone, ocular, and periodontal.

Conventional use and sustainable valorization of spent egg-laying hens as functional foods and biomaterials: A review

Spent hen are egg-laying hens reaching the end of their laying cycles; billions of spent hens are produced globally each year. Differences in people's attitudes towards spent hen as foods lead to their different fates among countries. While spent hens are consumed as raw or processed meat products in Asian countries such as China, India, Korea, and Thailand, they are treated as a byproduct or waste, not a food product, in the western society; they are instead disposed by burial, incineration, composting (as fertilizers), or rendering into animal feed and pet food, which either create little market value or cause animal welfare and environmental concerns. Despite being a waste, spent hen is a rich source of animal proteins and lipids, which are suitable starting materials for developing valorized products. This review discussed the conventional uses of spent hens, including food, animal feed, pet food, and compost, and the emerging uses, including biomaterials and functional food ingredients. These recent advances enable more sustainable utilization of spent hen, contributing to alternative solutions to its disposal while yielding residual value to the egg industry. Future research will continue to focus on the conversion of spent hen biomass into value-added products.

Graphical abstract

An optimal designed experiment for the alkaline hydrolysis of feather keratin

Feathers, burdensome waste from the poultry industry, can be a cheap source of keratin, a protein with excellent physicochemical, biological, and mechanical properties. Acid and alkaline hydrolyses are usually adopted for isolation of keratin from its natural resources. This study aimed at assessing the statistically significant effect of input variables in the alkaline hydrolysis of keratin from chicken feathers on the process yield and on the molecular weight of peptides obtained. The effect of the volume ratio of 1M NaOH to the feathers' mass, the hydrolysis time, and the shaking speed of the reaction mixture on the process yield were analyzed. The use of statistical analysis at the design step of experiment allowed reducing the trial number from 27 to 9. Among the input variables analyzed, only the volume ratio of 1M NaOH to the feathers' mass had a significant effect on the process yield, while none of them significantly affected the molecular weight of the peptides obtained. All hydrolysates were dominated by two peptides' fractions, with molecular weights of ca. 130 and 250 kDa, and mixture of many peptides of weight close to 10 kDa and smaller. Alkaline hydrolysis of feather keratin yielded protein hydrolysates soluble over a wide pH range.

Dexamethasone-loaded keratin films for ocular surface reconstruction

Amniotic membrane (AM) is often applied as a substitute material during ocular surface reconstruction. However, since AM has several disadvantages, alternative materials must be considered for this application. Keratin films made from human hair (KFs) have previously been presented as a promising option; they exhibited suitable characteristics and satisfactory biocompatibility in an in vivo rabbit model. Nevertheless, dexamethasone (DEX) eye drops are necessary after surgery to suppress inflammation. Since eye drops must be administered frequently, this might result in poor patient compliance, and the release of DEX at the transplant site would be clinically beneficial. Therefore, we aimed to incorporate DEX into KFs without hindering the positive film characteristics. Drug-loaded KFs were generated either by suspension technique or by the addition of solubilizing agents. The resulting specimens were analyzed regarding appearance, loading capacity, transparency, mechanical characteristics, swelling behavior and in vitro release. Furthermore, biocompatibility was assessed in vitro by determining the cell viability, seeding efficiency and growth behavior of corneal epithelial cells. The amount of incorporated DEX influenced the transparency and biomechanical properties of the films, but even highly loaded films showed properties similar to those of AM. The suspension technique was identified as the best incorporation approach regarding chemical stability and prolonged DEX release. Moreover, suspended DEX in the films did not negatively impact cell seeding efficiencies, and the cell-growth behaviors on the specimens with moderate DEX loads were satisfactory. This suggest that these films could comprise a suitable alternative material with additional anti-inflammatory activity for ocular surface reconstruction. Graphical abstract.

Autogenous Cross-Linking of Recycled Keratin from Poultry-Feather Waste to Hydrogels for Plant-Growth Media

The global rise in atmospheric temperature is leading to an increasing spread of semi-arid and arid regions and is accompanied by a deterioration of arable land. Polymers can help in a number of ways, but they must not be a burden to the environment. In this context, we present herein a method by which goose feathers, representative of keratin waste in general, can be transformed into hydrogels for use as a plant growth medium. The treatment of shredded feathers in Na₂S solution at ambient conditions dissolves approx. 80% of the keratin within 30 min. During evaporation, the thiol groups of cysteine reoxidise to disulphide bridges. Additionally, the protein chains form β-sheets. Both act as cross-links that enables the formation of gels. The drying conditions were found to be crucial as slower evaporation affords gels with higher degrees of swelling at the cost of reduced gel yields. The cress germination test indicated the absence of toxic substances in the gel, which strongly adheres to the roots. Thereby, the plants are protected from drought stress as long as the gel still contains moisture.

Prospects on the nano-plastic particles internalization and induction of cellular response in human keratinocytes

BACKGROUND

Today, cosmetic products are very popular with both men and women to improve their appearance and increase their social acceptability.

RESULTS

In this study, nano-sized (30-300 nm) plastic particles were isolated from the commercial face-scrubs and treated on the human keratinocytes. The observed adherence of polyethylene nano-plastics (PENPs), polystyrene NPs (PSNPs), and face-scrubs isolated nano-plastics (NPs) on the keratin layer reveals a significant attachment of NPs from the cosmetics that are applied on the skin for a short duration. This attachment property could facilitate further adherence of protein molecules on NPs and the protein-corona formation. The protein-corona mimics protein aggregates, thereby triggers macropinocytosis, followed by the macropinolysosomal process in the cell. These internalized NPs induced the concentration-dependent cytotoxic, cytostatic and cytoprotective activity in keratinocytes. Both single dose and chronic long-term exposure of lethal and sub-lethal concentrations of NPs resulted in oxidative stress-mediated down-regulation of cell growth and proliferation inhibition. Autophagic structures and premature aging were also observed using an electron microscopy and a senescence marker, respectively in the NPs internalized HaCaT cells incubated in a fresh, NPs-free medium.

CONCLUSION

Though 2D culture models have many limitations, it produces significant conceptual advancements. This work provides an insight into the NPs concentration-dependent regulatory, cytoprotective, and cytotoxic effects in HaCaT cells. However, 3D model studies are required to identify the detailed mechanisms of NPs toxicity and cytoprotective events in cells at the molecular level.

Untapped potentials of hazardous nanoarchitectural biopolymers

The First Industrial Revolution began when manual labour transitioned to machines. Fossil fuels and steam eventually replaced wood and water as an energy source used predominantly for the mechanized production of textiles and iron. The emergence of the required numerous enormous factories gave rise to smoke pollution due to the immense growth in coal consumption. The manufactured gas industry produced highly toxic effluent that was released into sewers and rivers polluting the water. Many pieces of legislation were introduced to overcome this issue, but with varying degrees of effectiveness. Alongside our growth in world population, the problems that we had with waste remained, but together with our increase in number the waste produced has also increased additionally. The immense volume of waste materials generated from human activity and the potentially detrimental effects on the environment and on public health have awakened in ourselves a critical need to embrace current scientific methods for the safe disposal of wastes. We are informed daily that our food waste must be better utilized to ensure enough food is available to feed the world's growing population in a sustainable way (Thyberg and Tonjes, 2016). Some things are easy, like waste food and cellulose products can be turned into compost, but how do we recycle sheep's wool? Or shrimp shells? Despite the fact that both these substances are hazardous, and have caused environmental and economic impact from being incinerated; but we anticipate that those substances may have the potential to convert into added value applications.We have been working in this area for over 15 years, working towards managing them and seeking their added value applications. We take the biological products, process (reconstitute) and engineer them into added value products such as functional and nanostructure materials including edible films, foams and composites including medical devices useful in the human body. Anything that we can ingest, should not cause an immune response in the human system. Natural biomacromolecules display the inherent ability to perform very specific chemical, mechanical or structural roles. Specifically, protein- and polysaccharide-based biomaterials have come to light as the most promising candidates for many biomedical applications due their biomimetic and nanostructured arrangements, their multi-functional features, and their capability to function as matrices that are capable of facilitating cell-cell and cell-matrix interactions.

Preparation, characterization and cell response studies on bioconjugated 3D protein hydrogels with wide-range stiffness: An approach on cell therapy and cell storage

The present study emphasizes the preparation and characterization of bioconjugated keratin-gelatin (KG) 3D hydrogels with wide-range stiffness to study cell response for cell therapy and cell storage applications. In brief, human hair keratin and bovine gelatin at different ratios bioconjugated using EDC/NHS provide five hydrogels (KG-1, KG-2.5, KG -5, KG-7.5 and KG-9) with modulus ranging from 0.9 ± 0.1 to 10.9 ± 0.4 kPa. Based on swelling, stability, porosity, and degradation parameters KG-5 and KG-9 are employed to assess the human dermal fibroblast (HDF) cell response, cell delivery and cell storage respectively. Characterization studies revealed the concentration of keratin determines the modulus/stiffness of the hydrogels, whereas gelatin concentration plays a vital role in porosity, swelling percentage, and degradation properties. HDF cell behaviour in the chosen hydrogels assessed based on cell adhesion, cell proliferation, PCNA expression, MTT assay, and DNA quantification. We observed the best cell behaviour in KG-5 hydrogels than in the KG-9 matrix. In cell storage and cell delivery studies, the KG-9 matrix displayed promising results. Thus, the present study concludes bioconjugated keratin-gelatin 3D hydrogel with modulus below 3.0 kPa facilitates the proliferation of HDFs, whereas matrix above 10 kPa modulus supports cell storage and cell recovery. The observations of the present study suggest the suitability of bioconjugated fibrous protein 3D hydrogel for cell therapy and cell storage.

Biocompatible, Antioxidant Nanoparticles Prepared from Natural Renewable Tea Polyphenols and Human Hair Keratins for Cell Protection and Anti-inflammation

Excessive reactive oxygen species (ROS) can cause oxidative stress of tissues and adversely influence homeostasis of the body. Epigallocatechin gallate (EGCG) with an antioxidative effect can effectively eliminate the ROS, but an evident weakness associated with it is the relatively poor cytocompatibility. Combining with other biomacromolecules such as human hair keratin (KE) and using nanotechnology to prepare nanoparticles can improve this situation. By covalent bonding, we assembled KE and EGCG into KE-EGCG nanoparticles (NANO) with size of about 50 nm and characterized them by DLS, UV, FTIR, NMR, and XPS. Free radical scavenging experiments show that antioxidant properties of the obtained NANO are superior to that of vitamin C. Cell culture experiments also show that the NANO can effectively protect the proliferation of L929 cells and HUVEC cells. In addition, we also used RAW264.7 cells to establish a H₂O₂-induced cell injury model and an lipopolysaccharide-induced cellular inflammatory model to evaluate the antioxidant and anti-inflammatory properties of NANO. The results show that the NANO can effectively prevent cells from oxidative damage and reduce inflammatory expression of the cells, indicating that the NANO have a good antioxidative and anti-inflammatory effect on cells which can be applied to many diseases related to oxidative stress.

Ferulic acid loaded microspheres reinforced in 3D hybrid scaffold for antimicrobial wound dressing

Here we report the preparation of biomimetic fibrin/chitosan/keratin hybrid scaffolds with a synergistic combination of ferulic acid loaded silica microspheres for antimicrobial wound dressing applications. The infrared and X-ray powder diffraction studies confirm the homogenous nature of the prepared hybrid scaffolds without any major interactions between the constituents. The developed hybrid scaffolds show good thermal, porosity, compression and water uptake properties. Scanning electron microscopic analysis shows that the as-synthesized ferulic acid loaded silica microspheres exhibit an average size of 35 ± 10 μm and also exposes the smooth surface with interconnected porosity in the prepared hybrid scaffolds. The incorporated ferulic acid loaded silica microspheres hybrid scaffolds show effective antimicrobial activity against the common wound pathogens. In vitro NIH3T3 fibroblast cell culture and drug release studies reveal that the prepared hybrid scaffolds have enhanced cell proliferation and adhesion with a prolonged drug release for about 72 h. In vitro wound healing and actin cytoskeleton analysis reveal that the incorporated ferulic acid loaded silica microspheres in fibrin/chitosan/keratin hybrid scaffolds facilitates cell growth and migration to damaged area through cell-cell interactions. These results suggest that the prepared hybrid scaffolds with ferulic acid loaded silica microspheres have great potential for soft tissue engineering applications particularly for the treatment of chronic and infected wounds.

Study on the Structure and Properties of Biofunctional Keratin from Rabbit Hair

Keratin is widely recognized as a high-quality renewable protein resource for biomedical applications. A large amount of rabbit hair waste is produced in textile industries, because it has high medullary layer content, but poor spinnability. Therefore, it is of great significance to extract keratin from waste rabbit hair for recycling. In this research, an ultrasonic-assisted reducing agent-based extraction method was developed and applied to extract keratin from rabbit hair. The results showed that the ultrasonic treatment had a certain destructive effect on the structure of the fiber, and when combined with reducing agent, it could effectively promote the dissolution of rabbit hair, and extract keratin with high molecular weight between 31 and 94 kDa. The structure and properties of keratin were studied. Compared to the rabbit hair, the cystine content of keratin was significantly reduced, and the secondary structure changed from α-helix to β-sheet. The keratin products show excellent biocompatibility and antioxidant capacity. In addition, large keratin particles can be formed by assembly with a balance between intermolecular hydrophobic attraction as the concentration of urea in keratin solution decreased during dialysis.

Fabrication of Second Skin from Keratin and Melanin

Second skin is a topically applied, skin-conforming material that mimics human skin properties and bears potential cosmetic and e-skin applications. To successfully integrate with natural skin, characteristics such as color and skin features must be matched. In this work, we prepared bio-based skin-like films from cross-linked keratin/melanin films (KMFs), using a simple fabrication method and non-toxic materials. The films retained their stability in aqueous solutions, showed skin-like mechanical properties, and were homogenous and handleable, with non-granular surfaces and a notable cross-linked structure as determined by attenuated total reflection (ATR). In addition, the combination of keratin and melanin allowed for adjustable tones similar to those of natural human skin. Furthermore, KMFs showed light transmittance and UV-blocking (up to 99%) as a function of melanin content. Finally, keratin/melanin ink (KMI) was used to inkjet-print high-resolution images with natural skin pigmented features. The KMFs and KMI may offer advanced solutions as e-skin or cosmetics platforms.

Strategies for improved hair binding: Keratin fractions and the impact of cationic substructures

Keratin extracts and hydrolysates from varying sources, their chemical modifications and compositions thereof have shown potential in the restoration of hair properties. Within this study on reactivity of thiol groups and the shielding effect of anionic charges the binding of keratin-associated proteins (KAP) and α-keratins (Ker) extracted from human hair to natural and permed hair fibers was evaluated. Selectively extracted KAP and Ker were preactivated with 6-mercaptonicotinamide in a quantity of 194 ± 21 μmol/g for KAP and 169 ± 27 μmol/g for Ker resulting in 1.9- and 1.4-fold enhanced binding to natural hair, respectively. The amount of accumulated Ker on hair fibers was furthermore increased by 1.7-fold in presence of 25 mM L-arginine. Perming of hair impaired binding characteristics of Ker with negligible effects for preactivation, whereas unmodified and preactivated KAP showed results comparable to natural hair. Strongly enhanced penetrability after perming was reflected by the mean penetration depth for fluorescein of 25 μm compared to 5 μm for natural fibers.

Keratin - Based materials for biomedical applications

Keratin constitutes the major component of the feather, hair, hooves, horns, and wool represents a group of biological material having high cysteine content (7-13%) as compared to other structural proteins. Keratin -based biomaterials have been investigated extensively over the past few decades due to their intrinsic biological properties and excellent biocompatibility. Unlike other natural polymers such as starch, collagen, chitosan, the complex three-dimensional structure of keratin requires the use of harsh chemical conditions for their dissolution and extraction. The most commonly used methods for keratin extraction are oxidation, reduction, steam explosion, microbial method, microwave irradiation and use of ionic liquids. Keratin -based materials have been used extensively for various biomedical applications such as drug delivery, wound healing, tissue engineering. This review covers the structure, properties, history of keratin research, methods of extraction and some recent advancements related to the use of keratin derived biomaterials in the form of a 3-D scaffold, films, fibers, and hydrogels.

Effect of varied hair protein fractions on the gel properties of keratin/chitosan hydrogels for the use in tissue engineering

Keratin/chitosan composite is a readily available source for a hybrid hydrogel in tissue engineering. While human hair keratins could provide biological functions, chitosan could further enhance the mechanical strength of the hybrid hydrogels. However, hair keratin is a group of natural proteins, and the uncontrolled hair protein contents in a hydrogel may lead to the batch-to-batch inconsistent gel properties. The purpose of this study was to investigate the role of hair protein composition, including the keratin-associated proteins (KAPs, 6-30 kDa) and keratin intermediate filaments (KIFs, 45-60 kDa) on gel characteristics of the keratin/chitosan hydrogel. The various compressive and tensile modulus of the gel was observed based on the selection of different protein fractions as the significant gel components. These results thus suggest a straightforward method of preparing hair keratin/chitosan hydrogel with much more controllable gel properties by merely modulating the KAPs/KIFs ratios in a gel.

Keratin Biomembranes as a Model for Studying Onychomycosis

Difficulties in obtaining human nails that are large enough for examining the penetration of drug formulations led us to produce keratin films regenerated from human hair. We assume that these films can simulate human nail plates in drug penetration and permeation tests and can serve as a biological model for studying onychomycosis. The films were formed from keratin extracted from human hair using dithiothreitol, urea and thiourea. The obtained keratin extract was dispensed into Teflon rings and dried at 40 °C and then cured at 110 °C. The structure, surface morphology, chemical characterization and thermal stability of the films were characterized and were compared to those of human nail, hair and bovine hoof samples using SDS-electrophoresis, scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The structure of the obtained films was found to be closer to human nails than to hair or bovine hooves. The keratin films were infected with Trichophyton rubrum and were proven to be appropriate for serving as a model for studying onychomycosis.

A novel thermal hydrolysis process for extraction of keratin from hog hair for commercial applications

We have developed a novel thermal hydrolysis process (THP) to extract and hydrolyze keratin from keratinous animal body wastes without using any chemicals. Our process consists of two heating steps: one is to swell and denature the keratin protein network in the intermediate filaments, while the other is to cleavage the disulfide bonds that connect the tight keratinous fibrils together. Using hog hair as an example, the two-step process achieved a nearly 70% keratin recovery yield, with respect to the original keratin in the hog hair, which is comparable to one of the best recovery yields by conventional chemical processes. The extracted keratin hydrolysate by THP was filtered by the shear wave-induced membrane ultrafiltation for characterization. The molecular weight (MW) analysis using SDS-PAGE and MALDI-TOF mass spectroscopy has demonstrated that our keratin hydrolysis obtained by our two-step THP has a wide range of MW distribution, similar to those already in the hair-care product market. The amino acid composition analysis has shown that our keratin hydrolysate by THP had twice as much essential amino acids as soybean meals on a dry mattter basis. As to the cysteine residue content, we have shown that it can be controlled by adjusting the 2nd heating temperature.

Evaluation of an Explanted Porcine Skin Model to Investigate Infection with the Dermatophyte Trichophyton rubrum

Dermatophytosis is a fungal infection of skin, hair and nails, and the most frequently found causative agent is Trichophyton rubrum. The disease is very common and often recurring, and it is therefore difficult to eradicate. To develop and test novel treatments, infection models that are representative of the infection process are desirable. Several infection models have been developed, including the use of cultured cells, isolated corneocytes, explanted human skin or reconstituted human epidermis. However, these have various disadvantages, ranging from not being an accurate reflection of the site of infection, as is the case with, for example, cultured cells, to being difficult to scale up or having ethical issues (e.g., explanted human skin). We therefore sought to develop an infection model using explanted porcine skin, which is low cost and ethically neutral. We show that in our model, fungal growth is dependent on the presence of skin, and adherence of conidia is time-dependent with maximum adherence observed after ~ 2 h. Scanning electron microscopy suggested the production of fibril-like material that links conidia to each other and to skin. Prolonged incubation of infected skin leads to luxurious growth and invasion of the dermis, which is not surprising as the skin is not maintained in conditions to keep the tissue alive, and therefore is likely to lack an active immune system that would limit fungal growth. Therefore, the model developed seems useful to study the early stages of infection. Furthermore, we demonstrate that the model can be used to test novel treatment regimens for tinea infections.

Potential use of human hair shaft keratin peptide signatures to distinguish gender and ethnicity

Background

Most human hairs collected at old crime scenes do not contain nuclear DNA and are therefore of less value for forensic investigations. In the present study, hair shaft proteins were extracted from 40 healthy subjects between the ages of 21 to 40 years and profiled using gel electrophoresis-based proteomics to determine if they can be used to distinguish gender and ethnicity.

Methods

Extraction of the human hair shaft proteins was performed using a newly developed alkaline solubilisation method. The extracts were profiled by 2-dimensional electrophoresis and resolved protein spots were identified by mass spectrometry and queried against the human hair database. The study was then followed-up by immunoblotting of the identified hair shaft keratin of interest using commercially available antibodies.

Results

Separation of the human hair shaft proteins by 2-dimensional electrophoresis generated improved and highly resolved profiles. Comparing the hair shaft protein profiles of 10 female with 10 male subjects and their identification by mass spectrometry and query of the human hair database showed significant altered abundance of truncated/processed type-II keratin peptides K81 (two spots), K83 (one spot) and K86 (three spots). The 2-dimensional electrophoresis profiling of 30 hair shaft samples taken from women of similar age range but from three distinctive ethnic subpopulations in Malaysia further showed significant altered abundance of one type-I and four type-II truncated/processed keratin peptides including K33b, K81, K83 and K86 (2 spots) between at least two of the ethnic groups. When a followed-up immunoblotting experiment was performed to detect the relative expression of the K86 peptides using commercialised antibodies, similar trends of expression were obtained. The present data, when taken together, demonstrated the potential use of keratin peptide signatures of the human hair shaft to distinguish gender and ethnicity although this needs to be further substantiated in a larger scale study.

Keratinous materials: Structures and functions in biomedical applications

Keratins are a family of fibrous proteins anticipated to possess wide-ranging biomedical applications due to their abundance, physicochemical properties and intrinsic biological activity. This review mainly focuses on the biomaterials derived from three major sources of keratins; namely human hair, wool and feather, that have effective applications in tissue engineering, wound healing and drug delivery. This article offers five viewpoints regarding keratin i) an introduction to keratin protein extraction and keratin-based scaffold fabrication methods ii) applications in nerve and bone tissue engineering iii) a review on the keratin dressings applied to different types of wounds to facilitate wound healing and thereby repair the skin iv) the utilization of keratinous materials as a carrier system for therapeutics with a controlled manner v) a discussion regarding the main challenges for using keratin in biomedical applications as well as its future prospects.

Human Hair: Scaffold Materials for Regenerative Medicine

This chapter reviews the studies of keratin-based biomaterials in the past and discusses the advancement of it in recent years. Keratin, as a protein-based biopolymer, possesses excellent biocompatibility and biodegradability. In addition, keratin has abundant disulfide bonds, which result in its unique and tough structure. However, the property also results in dissolubility, which causes difficult process ability. Over the past years, much research utilizes different methodologies to extract keratins. Different kinds of extraction methods affect the characteristics of keratins and give a wide variety of application forms. The features of different methods are discussed and summarized in the following.

Sludge char-to-fuel approaches based on the pyrolysis III: Adding protein without dehydration

Urban expansion has led to the accumulation of sludge, and its disposal has to meet increasingly stringent requirements. Therefore, pyrolysis has become an alternative option. However, it was still unclear which part of the sludge could be pyrolyzed to generate the product with a higher heating value, and therefore we divided sludge into extracellular polymeric substances (EPS) and cell phase and measured their heating values respectively. The obtained results showed that the high heating value (HHV) of the pyrolysis cell phase accounted for 85% of the sludge pyrolysis, and the addition of protein significantly increased the heating value of each component. Although the HHV of the pyrolysis cell phase increased by 1.8 MJ kg^-1 for every 1% increase in protein, the HHV of the pyrolysis sludge and EPS increased by only 1.2 MJ kg^-1. It is therefore suggested that EPS may contain substances that inhibit heat release. Properly increasing the cellular or protein components in the sludge could significantly increase the HHV produced by pyrolysis. Based on the measurement of fatty acids (FAs) and alcohol content and FTIR results, the addition of protein could increase the saturated FAs and accelerate the replacement of oxygen with nitrogen in the pyrolysis product, resulting in higher HHV. If the sludge was not dehydrated, more volatile compounds were carbonized and the HHV increased from 12 MJ kg^-1 to 19 MJ kg^-1. In short, since the HHV of the sludge was mainly derived from the cell phase, the HHV generation could be improved by increasing the cell phase or protein content without dehydration.

Recombinant Human Hair Keratin Nanoparticles Accelerate Dermal Wound Healing

In recent years, favorable enhanced wound-healing properties and excellent biocompatibility of keratin derived from human hair have attracted considerable attention. Recombinant keratin proteins can be produced by recombinant DNA technology and have higher purity than extracted keratin. However, the wound-healing properties of recombinant keratin proteins remain unclear. Herein, two recombinant trichocyte keratins including human type I hair keratin 37 and human type II hair keratin 81 were expressed using a bacterial expression system, and recombinant keratin nanoparticles (RKNPs) were prepared via an ultrasonic dispersion method. The molecular weight, purity, and physicochemical properties of the recombinant keratin proteins and nanoparticles were assessed using gel electrophoresis, circular dichroism, mass spectrometry, and scanning electron microscope analyses. The RKNPs significantly enhanced cell proliferation and migration in vitro, and the treatment of dermal wounds in vivo with RKNPs resulted in improved wound healing associated with improved epithelialization, vascularization, and collagen deposition and remodeling. In addition, the in vivo biocompatibility test revealed no systemic toxicity. Overall, this work demonstrates that RKNPs are a promising candidate for enhanced wound healing, and this study opens up new prospects for the development of keratin biomaterials.

Keratin scaffolds with human adipose stem cells: Physical and biological effects toward wound healing

Keratin, a natural biomaterial derived from wool or human hair, has the intrinsic ability to interact with different types of cells and the potential to serve as a controllable extracellular matrix that can be used a scaffold for tissue engineering. In this study, we demonstrated a simple and fast technique to construct 3D keratin scaffolds for accelerated wound healing using a lyophilization method based on extraction of keratin from human hair. The physical properties of the keratin scaffolds such as water uptake, pore size, and porosity can be adjusted by changing the protein concentrations during the fabrication process. The keratin scaffolds supported human adipose stem cells (hASCs) adhesion, proliferation, and differentiation. In vivo study performed on ICR mice showed that keratin scaffolds with hASCs shortened skin wound healing time, accelerated epithelialization, and promoted wound remodeling. Therefore, keratin scaffolds alone or together with hASCs may serve as therapeutic agents for repairing wounded tissue.

Development of high-performance two-dimensional gel electrophoresis for human hair shaft proteome

The primary components of human hair shaft—keratin and keratin-associated proteins (KAPs), together with their cross-linked networks—are the underlying reason for its rigid structure. It is therefore requisite to overcome the obstacle of hair insolubility and establish a reliable protocol for the proteome analysis of this accessible specimen. The present study employed an alkaline-based method for the efficient isolation of hair proteins and subsequently examined them using gel-based proteomics. The introduction of two proteomic protocols, namely the conventional and modified protocol, have resulted in the detection of more than 400 protein spots on the two-dimensional gel electrophoresis (2DE). When compared, the modified protocol is deemed to improve overall reproducibility, whilst offering a quick overview of the total protein distribution of hair. The development of this high-performance protocol is hoped to provide a new approach for hair analysis, which could possibly lead to the discovery of biomarkers for hair in health and diseases in the future.

A sustainable resistive switching memory device based on organic keratin extracted from hair

It is the consensus of researchers that the reuse of natural resources is an effective way to solve the problems of environmental pollution, waste and overcapacity. Moreover, compared with the case of inorganic materials, the renewability of natural biomaterials has great prominent advantages. In this study, keratin, which was first extracted from hair due to its high content in hair, was chosen as a functional layer for the fabrication of a resistance switching device with the Ag/keratin/ITO structure; in this device, a stable resistive switching memory behavior with good retention characteristic was observed. Via mechanism analysis, it is expected that there is hopping conduction at low biases, and the formation of a conductive filament occurs at high biases. Furthermore, our device exhibited a stable switching behavior with different conductive materials (Ti and FTO) as bottom electrodes, and the influence of Ag and graphite conductive nanoparticles (NPs) doped into the keratin layer on the switching performance of the device was also investigated. This study not only suggests that keratin is a potential biomaterial for the preparation of memory devices, but also provides a promising route for the fabrication of bio-electronic devices with non-toxicity, degradability, sustainability etc.

This study suggests that keratin is a potential biomaterial for the preparation of memory devices with non-toxicity, degradability and sustainability.

High-Frequency Heating Extraction Method for Sensitive Drug Analysis in Human Nails

Background: A simple, sensitive, and rapid extraction method based on high-frequency (H-F) heating was developed for drug analysis in human nails. Methods: A human nail was placed in a glass tube with an extraction solvent (methanol and 0.1% formic acid; 7:3, v/v), and a ferromagnetic alloy (pyrofoil) was wrapped in a spiral around the glass tube. Then, the glass tube was placed in a Curie point pyrolyzer, and a H-F alternating voltage (600 kHz) was applied. The sample and extraction solvent were heated at the Curie temperature for 3 min. Different Curie temperatures were applied by changing the pyrofoil (160 °C, 170 °C, 220 °C, and 255 °C). Results: The caffeine in the nail was effectively and rapidly extracted into the extraction solvent with the pyrofoil at 220 °C. The peak area obtained for the caffeine using liquid chromatography mass spectrometry (LC-MS/MS) was five times that of what was obtained after conventional ultrasonic irradiation extraction. Because the extraction uses high-pressure and high-temperature conditions in a test tube, the drugs that were strongly incorporated in nails could be extracted into the solvent. The amount of caffeine extracted was independent of the size of the pieces in the sample. Conclusions: Therefore, the sensitive determination of target drugs in nails is possible with rapid (20 min, including H-F extraction for 3 min) and simple sample preparation. The developed method was applied to a nail from a patient with hypertension.