Interlaboratory evaluation of rodent pulmonary responses to engineered nanomaterials: the NIEHS Nano GO Consortium

Influence of silver doping on pro-inflammatory and pro-fibrogenic effects of nano-titanium dioxide in murine lung

Silver is usually loaded on nano-titanium dioxide (TiO2 ) through photodeposition method to enhance visible-light catalytic functions for environment purification. However, little is known about how the toxicity changes after silver doping and how the physicochemical properties of loaded components affect nanocomposite toxicity. In this study, Ag-TiO2 with different sizes and contents of silver particles were obtained by controlling photodeposition time (PDT) and silver addition amount. Pro-inflammatory and pro-fibrogenic responses of these photocatalysts were evaluated in male C57BL/6J murine lung. As a result, silver was well assembled on TiO2 , promoting visible-light catalytic activity. Notably, the size of silver particles increased with PDT. Meanwhile, toxicity results showed that pure TiO2 (P25) mainly caused neutrophil infiltration, while 2 wt/wt% silver-loaded TiO2 recruited more types of inflammatory cells in the lung. Both of them caused the increase of proinflammatory cytokines while decreasing the anti-inflammatory cytokine in bronchoalveolar lavage fluid. However, 2 wt/wt% silver doping also accelerated the lung pro-fibrogenic response of photocatalysts in the subacute phase from evidence of collagen deposition and hydroxyproline concentrations. Mechanistically, the overactivation of TGFBR2 receptors in TGF-β/smads pathways by silver-loaded TiO2 rather than pure TiO2 may be the reason why silver-loaded TiO2 can promote pro-fibrogenic effect response. Intriguingly, the increased toxicity caused by silver doping can be rescued by increasing the size of the loaded silver or decreasing the silver amount. These results may be important for the new understanding of the toxicity of TiO2 -based photocatalysts.

Interaction of TiO2 nanoparticles with lung fluid proteins and the resulting macrophage inflammatory response

Inhalation is a major exposure route to nanoparticles. Following inhalation, nanoparticles first interact with the lung lining fluid, a complex mixture of proteins, lipids, and mucins. We measure the concentration and composition of lung fluid proteins adsorbed on the surface of titanium dioxide (TiO2) nanoparticles. Using proteomics, we find that lung fluid results in a unique protein corona on the surface of the TiO2 nanoparticles. We then measure the expression of three cytokines (interleukin 6 (IL-6), tumor necrosis factor-alpha (TNF-α), and macrophage inflammatory protein 2 (MIP-2)) associated with lung inflammation. We find that the corona formed from lung fluid leads to elevated expression of these cytokines in comparison to bare TiO2 nanoparticles or coronas formed from serum or albumin. These experiments show that understanding the concentration and composition of the protein corona is essential for understanding the pulmonary response associated with human exposure to nanoparticles.

PM2.5 Increases Systemic Inflammatory Cells and Associated Disease Risks by Inducing NRF2-Dependent Myeloid-Biased Hematopoiesis in Adult Male Mice

Although PM_2.5 (fine particles with aerodynamic diameter <2.5 μm) exposure shows the potential to impact normal hematopoiesis, the detailed alterations in systemic hematopoiesis and the underlying mechanisms remain unclear. For hematopoiesis under steady-state or stress conditions, nuclear factor erythroid 2-related factor 2 (NRF2) is essential for regulating hematopoietic processes to maintain blood homeostasis. Herein, we characterized changes in the populations of hematopoietic stem progenitor cells and committed hematopoietic progenitors in the lungs and bone marrow (BM) of wild-type and Nrf2^-/- C57BL/6J male mice. PM_2.5-induced NRF2-dependent biased hematopoiesis toward myeloid lineage in the lungs and BM generates excessive numbers of various inflammatory immune cells, including neutrophils, monocytes, and platelets. The increased population of these immune cells in the lungs, BM, and peripheral blood has been associated with observed pulmonary fibrosis and high disease risks in an NRF2-dependent manner. Therefore, although NRF2 is a protective factor against stressors, upon PM_2.5 exposure, NRF2 is involved in stress myelopoiesis and enhanced PM_2.5 toxicity in pulmonary injury, even leading to systemic inflammation.

Distinct profiles of oxylipid mediators in liver, lung, and placenta after maternal nano-TiO2 nanoparticle inhalation exposure

Nano-titanium dioxide (nano-TiO2) is a widely used nanomaterial found in several industrial and consumer products, including surface coatings, paints, sunscreens and cosmetics, among others. Studies have linked gestational exposure to nano-TiO2 with negative maternal and fetal health outcomes. For example, maternal pulmonary exposure to nano-TiO2 during gestation has been associated not only with maternal, but also fetal microvascular dysfunction in a rat model. One mediator of this altered vascular reactivity and inflammation is oxylipid signaling. Oxylipids are formed from dietary lipids through several enzyme-controlled pathways as well as through oxidation by reactive oxygen species. Oxylipids have been linked to control of vascular tone, inflammation, pain and other physiological and disease processes. In this study, we use a sensitive UPLC-MS/MS based analysis to probe the global oxylipid response in liver, lung, and placenta of pregnant rats exposed to nano-TiO2 aerosols. Each organ presented distinct patterns in oxylipid signaling, as assessed by principal component and hierarchical clustering heatmap analysis. In general, pro-inflammatory mediators, such as 5-hydroxyeicosatetraenoic acid (1.6 fold change) were elevated in the liver, while in the lung, anti-inflammatory and pro-resolving mediators such as 17-hydroxy docosahexaenoic acid (1.4 fold change) were elevated. In the placenta the levels of oxylipid mediators were generally decreased, both inflammatory (e.g. PGE2, 0.52 fold change) and anti-inflammatory (e.g. Leukotriene B4, 0.49 fold change). This study, the first to quantitate the levels of these oxylipids simultaneously after nano-TiO2 exposure, shows the complex interplay of pro- and anti-inflammatory mediators from multiple lipid classes and highlights the limitations of monitoring the levels of oxylipid mediators in isolation.

Comparing species-different responses in pulmonary fibrosis research: Current understanding of in vitro lung cell models and nanomaterials

Pulmonary fibrosis (PF) is a chronic, irreversible lung disease that is typically fatal and characterized by an abnormal fibrotic response. As a result, vast areas of the lungs are gradually affected, and gas exchange is impaired, making it one of the world's leading causes of death. This can be attributed to a lack of understanding of the onset and progression of the disease, as well as a poor understanding of the mechanism of adverse responses to various factors, such as exposure to allergens, nanomaterials, environmental pollutants, etc. So far, the most frequently used preclinical evaluation paradigm for PF is still animal testing. Nonetheless, there is an urgent need to understand the factors that induce PF and find novel therapeutic targets for PF in humans. In this regard, robust and realistic in vitro fibrosis models are required to understand the mechanism of adverse responses. Over the years, several in vitro and ex vivo models have been developed with the goal of mimicking the biological barriers of the lung as closely as possible. This review summarizes recent progress towards the development of experimental models suitable for predicting fibrotic responses, with an emphasis on cell culture methods, nanomaterials, and a comparison of results from studies using cells from various species.

Establishing relationships between particle-induced in vitro and in vivo inflammation endpoints to better extrapolate between in vitro markers and in vivo fibrosis

BACKGROUND

Toxicity assessment for regulatory purposes is starting to move away from traditional in vivo methods and towards new approach methodologies (NAM) such as high-throughput in vitro models and computational tools. For materials with limited hazard information, utilising quantitative Adverse Outcome Pathways (AOPs) in a testing strategy involving NAM can produce information relevant for risk assessment. The aim of this work was to determine the feasibility of linking in vitro endpoints to in vivo events, and moreover to key events associated with the onset of a chosen adverse outcome to aid in the development of NAM testing strategies. To do this, we focussed on the adverse outcome pathway (AOP) relating to the onset of pulmonary fibrosis.

RESULTS

We extracted in vivo and in vitro dose-response information for particles known to induce this pulmonary fibrosis (crystalline silica, specifically α-quartz). To test the in vivo-in vitro extrapolation (IVIVE) determined for crystalline silica, cerium dioxide nanoparticles (nano-CeO₂) were used as a case study allowing us to evaluate our findings with a less studied substance. The IVIVE methodology outlined in this paper is formed of five steps, which can be more generally summarised into two categories (i) aligning the in vivo and in vitro dosimetry, (ii) comparing the dose-response curves and derivation of conversion factors.

CONCLUSION

Our analysis shows promising results with regards to correlation of in vitro cytokine secretion to in vivo acute pulmonary inflammation assessed by polymorphonuclear leukocyte influx, most notable is the potential of using IL-6 and IL-1β cytokine secretion from simple in vitro submerged models as a screening tool to assess the likelihood of lung inflammation at an early stage in product development, hence allowing a more targeted investigation using either a smaller, more targeted in vivo study or in the future a more complex in vitro protocol. This paper also highlights the strengths and limitations as well as the current difficulties in performing IVIVE assessment and suggestions for overcoming these issues.

Deciphering the Effects of 2D Black Phosphorus on Disrupted Hematopoiesis and Pulmonary Immune Homeostasis Using a Developed Flow Cytometry Method

As an emerging two-dimensional nanomaterial with promising prospects, mono- or few-layer black phosphorus (BP) is potentially toxic to humans. We investigated the effects of two types of BPs on adult male mice through intratracheal instillation. Using the flow cytometry method, the generation, migration, and recruitment of immune cells in different organs have been characterized on days 1, 7, 14, and 21 post-exposure. Compared with small BP (S-BP, lateral size at ∼188 nm), large BP (L-BP, lateral size at ∼326 nm) induced a stronger stress lymphopoiesis and B cell infiltration into the alveolar sac. More importantly, L-BP dramatically increased peripheral neutrophil (NE) counts up to 1.9-fold on day 21 post-exposure. Decreased expression of the CXCR4 on NEs, an important regulator of NE retention in the bone marrow, explained the increased NE release into the circulation induced by L-BP. Therefore, BP triggers systemic inflammation via the disruption of both the generation and migration of inflammatory immune cells.

Colloidal Stability of Silica-Modified Magnetite Nanoparticles: Comparison of Various Dispersion Techniques

The production of stable and homogeneous batches during nanoparticle fabrication is challenging. Surface charging, as a stability determinant, was estimated for 3-aminopropyltriethoxysilane (APTES) coated pre-formed magnetite nanoparticles (MNPs). An important consideration for preparing stable and homogenous MNPs colloidal systems is the dispersion stage of pre-formed samples, which makes it feasible to increase the MNP reactive binding sites, to enhance functionality. The results gave evidence that the samples that had undergone stirring had a higher loading capacity towards polyanions, in terms of filler content, compared to the sonicated ones. These later results were likely due to the harsh effects of sonication (extremely high temperature and pressure in the cavities formed at the interfaces), which induced the destruction of the MNPs.

Utilizing literature-based rodent toxicology data to derive potency estimates for quantitative risk assessment

Evaluating the potential occupational health risk of engineered nanomaterials is an ongoing need. The objective of this meta-analysis, which consisted of 36 studies containing 86 materials, was to assess the availability of published in vivo rodent pulmonary toxicity data for a variety of nanoscale and microscale materials and to derive potency estimates via benchmark dose modeling. Additionally, the potency estimates based on particle mass lung dose associated with acute pulmonary inflammation were used to group materials based on toxicity. The commonalities among the physicochemical properties of the materials in each group were also explored. This exploration found that a material's potency tended to be associated primarily with the material class based on chemical composition and form (e.g. carbon nanotubes, TiO₂, ZnO) rather than with particular physicochemical properties. Limitations in the data available precluded a more extensive analysis of these associations. Issues such as data reporting and appropriate experimental design for use in quantitative risk assessment are the main reasons publications were excluded from these analyses and are discussed.

A harmonized and standardized in vitro approach produces reliable results on silver nanoparticles toxicity in different cell lines

Despite the widespread use of silver nanoparticles (AgNPs) in different fields and the amount of investigations available, to date, there are many contradictory results on their potential toxicity. In the present study, extensively characterized 20-nm AgNPs were investigated using optimized protocols and standardized methods to test several toxicological endpoints in different cell lines. The agglomeration/aggregation state of AgNPs in culture media was measured by dynamic light scattering (DLS). DNA and chromosomal damage on BEAS-2B and RAW 264.7 cells were evaluated by comet and micronucleus assays, while oxidative DNA damage by modified comet assay and 8-oxodG/8-oxodA detection. We also investigated immunotoxicity and immunomodulation by cytokine release and NO production in RAW 264.7 and MH-S cells, with or without lipopolysaccharide (LPS) stimulus. Transmission electron microscope (TEM) analysis was used to analyze cellular uptake of AgNPs. Our results indicate different values of AgNPs hydrodynamic diameter depending on the medium, some genotoxic effect just on BEAS-2B and no or slight effects on function of RAW 264.7 and MH-S in absence or presence of LPS stimulus. This study highlights the relevance of using optimized protocols and multiple endpoints to analyze the potential toxicity of AgNPs and to obtain reliable and comparable results.

Carbon nanotubes promote alveolar macrophages toward M2 polarization mediated epithelial-mesenchymal transition and fibroblast-to-myofibroblast transdifferentiation

With substantial progress of nanotechnology, carbon nanotubes (CNTs) are widely used in a variety of industrial and commercial applications. There is rising concern about potential adverse health effects, such as pulmonary fibrosis, related to inhalation of CNTs. The detailed cellular and molecular mechanisms of pulmonary fibrosis induced by CNTs are still not clear. Epithelial-mesenchymal transition (EMT) and fibroblast-to-myofibroblast transdifferentiation (FMT) are considered as critical events in pathogenesis of pulmonary fibrosis. Alveolar macrophages (AMs) polarization plays a key role of regulating EMT and FMT in pulmonary fibrosis. In this study, we applied CNTs to stimulate primary mouse AMs under M1 or M2 polarization conditions, then analyzed the proportion of F4/80⁺CD11c⁺ or F4/80⁺CD206⁺ AMs, mRNA expression and activities of iNOS or Arg-1, as well as mRNA expression and content of TNF-α and IL-6 or TGF-β and IL-10 to evaluate dynamic phenotypic and functional changes of AMs. Single-walled CNT (SWCNT), short-type multi-walled CNT (MWCNT), and long-type MWCNT exposure at dose of 50 µg/ml promote AMs polarization toward M1 phenotype at early stage, while promote AMs polarization toward M2 phenotype at late stage. The roles of AMs polarization during development of EMT and FMT were further investigated by conditioned medium (CM) experiments. CNTs-activated M2 AMs promote progression of EMT and FMT via secreting TGF-β. Furthermore, up-regulating IRF4 may be involved in CNTs-induced M2 AMs polarization. In conclusion, this study demonstrates a new insight that CNTs exposure promotes AMs polarization toward M2 phenotype which facilitate EMT and FMT through secreting TGF-β.

Sample preparation considerations for surface and crystalline properties and ecotoxicity of bare and silica-coated magnetite nanoparticles

Magnetite (Fe₃O₄) nanoparticles (NPs) have widely used in various fields, including in medicine, due to their (super)paramagnetic properties. This requires a thorough evaluation of their possible hazardous effects. However, there is no standard procedure for the preparation of oxidation-prone NPs (such as magnetite) before subjecting them to biological assays. In this study we used Fe₃O₄ NPs (bare and silica-coated) as test samples to compare different preparation methods (ultrasound, centrifugation and filteration of NPs suspensions) based on X-ray and dynamic light scattering analysis and evaluation of microstructure and surface charge. After oxidation and functionalization, all samples retained their superparamagnetic behaviour. The toxicity of NP suspensions obtained by the methods described for Paramecium caudatum ciliates and Sinapis alba plants was evaluated.

The charge and surface reactivity of magnetite nanoparticles can be affected by the different separation methods leading to their toxicity changes.

The pulmonary toxicity of carboxylated or aminated multi-walled carbon nanotubes in mice is determined by the prior purification method

Background

Inhalation of multi-walled carbon nanotubes (MWCNTs) poses a potential risk to human health. In order to safeguard workers and consumers, the toxic properties of MWCNTs need to be identified. Functionalization has been shown to either decrease or increase MWCNT-related pulmonary injury, depending on the type of modification. We, therefore, investigated both acute and chronic pulmonary toxicity of a library of MWCNTs derived from a common pristine parent compound (NC7000).

Methods

MWCNTs were thermally or chemically purified and subsequently surface functionalized by carboxylation or amination. To evaluate pulmonary toxicity, male C57BL6 mice were dosed via oropharyngeal aspiration with either 1.6 or 4 mg/kg of each MWCNT type. Mitsui-7 MWCNT was used as a positive control. Necropsy was performed at days 3 and 60 post-exposure to collect bronchoalveolar lavage fluid (BALF) and lungs.

Results

At day 3 all MWCNTs increased the number of neutrophils in BALF. Chemical purification had a greater effect on pro-inflammatory cytokines (IL-1β, IL-6, CXCL1) in BALF, while thermal purification had a greater effect on pro-fibrotic cytokines (CCL2, OPN, TGF-β1). At day 60, thermally purified, carboxylated MWCNTs had the strongest effect on lymphocyte numbers in BALF. Thermally purified MWCNTs caused the greatest increase in LDH and total protein in BALF. Furthermore, the thermally purified and carboxyl- or amine-functionalized MWCNTs caused the greatest number of granulomatous lesions in the lungs. The physicochemical characteristics mainly associated with increased toxicity of the thermally purified derivatives were decreased surface defects and decreased amorphous content as indicated by Raman spectroscopy.

Conclusions

These data demonstrate that the purification method is an important determinant of lung toxicity induced by carboxyl- and amine-functionalized MWCNTs.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-020-00390-y.

Food-Grade TiO2 Particles Generate Intracellular Superoxide and Alter Epigenetic Modifiers in Human Lung Cells

Titanium dioxide (TiO₂) particles are a common ingredient in food, providing the bright white color for many candies, gums, and frostings. While ingestion of these materials has been examined previously, few studies have examined the effect of these particles on lung cells. Inhalation is an important exposure pathway for workers processing these foods and, more recently, home users who purchase these particles directly. We examine the response of lung cells to food-grade TiO₂ particles using a combination of fluorescence microscopy and RT-PCR. These experiments show that TiO₂ particles generate intracellular reactive oxygen species, specifically superoxide, and alter expression of two epigenetic modifiers, histone deacetylase 9 (HDAC9) and HDAC10. We use a protein corona formed from superoxide dismutase (SOD), an enzyme that scavenges superoxide, to probe the relationship between TiO₂ particles and superoxide generation. These experiments show that low, non-cytotoxic, concentrations of food-grade TiO₂ particles lead to cellular responses, including altering two enzymes responsible for epigenetic modifications. This production of superoxide and change in epigenetic modifiers could affect human health following inhalation. We expect this research will motivate future in vivo experiments examining the pulmonary response to food-grade TiO₂ particles.

Tissue Specific Fate of Nanomaterials by Advanced Analytical Imaging Techniques - A Review

A variety of imaging and analytical methods have been developed to study nanoparticles in cells. Each has its benefits, limitations, and varying degrees of expense and difficulties in implementation. High-resolution analytical scanning transmission electron microscopy (HRSTEM) has the unique ability to image local cellular environments adjacent to a nanoparticle at near atomic resolution and apply analytical tools to these environments such as energy dispersive spectroscopy and electron energy loss spectroscopy. These tools can be used to analyze particle location, translocation and potential reformation, ion dispersion, and in vivo synthesis of second-generation nanoparticles. Such analyses can provide in depth understanding of tissue-particle interactions and effects that are caused by the environmental "invader" nanoparticles. Analytical imaging can also distinguish phases that form due to the transformation of "invader" nanoparticles in contrast to those that are triggered by a response mechanism, including the commonly observed iron biomineralization in the form of ferritin nanoparticles. The analyses can distinguish ion species, crystal phases, and valence of parent nanoparticles and reformed or in vivo synthesized phases throughout the tissue. This article will briefly review the plethora of methods that have been developed over the last 20 years with an emphasis on the state-of-the-art techniques used to image and analyze nanoparticles in cells and highlight the sample preparation necessary for biological thin section observation in a HRSTEM. Specific applications that provide visual and chemical mapping of the local cellular environments surrounding parent nanoparticles and second-generation phases are demonstrated, which will help to identify novel nanoparticle-produced adverse effects and their associated mechanisms.

Nanomaterials and Innate Immunity: A Perspective of the Current Status in Nanosafety

Human exposure to engineered nanomaterials (ENMs) is inevitable due to the plethora of applications for which they are being manufactured and integrated within. ENMs demonstrate plentiful advantages in terms of industrial approaches as well as from a consumer perspective. However, despite such positives, doubts remain over the human health implications of ENM exposure. In light of the increased research focus upon the potential effects of ENM exposure to human health in recent decades, questions still remain regarding the safety of these highly advanced, precision-tuned physical entities. The risk of short-term, high-dose exposure to humans is considered relatively low, although this has formed the direction of the hazard-assessment community since the turn of the 21st century. However, the possibility of humans being exposed repeatedly over a long period of time to a low-dose of ENMs of varying physicochemical characteristics is of significant concern, and thus, industry, government, academic, and consumer agencies are only now beginning to consider this. Notably, when considering the human health implications of such low-dose, long-term, repeated exposure scenarios, the impact of ENMs upon the human immune system is of primary importance. However, there remains a real need to understand the impact of ENMs upon the human immune system, especially the innate immune system, at all stages of life, given exposure to nanosized particles begins before birth, that is, of the fetus. Therefore, the purpose of this perspective is to summarize what is currently known regarding ENM exposure of different components of the innate immune system and identify knowledge gaps that should be addressed if we are to fully deduce the impact of ENM exposure on innate immune function.

Silver nanoparticle immunomodulatory potential in absence of direct cytotoxicity in RAW 264.7 macrophages and MPRO 2.1 neutrophils

Engineered nanomaterials (ENM) are being used in a wide range of consumer products and pharmaceuticals; hence, there is an increasing risk for human exposure and potential adverse outcomes. The immune system, vital in host defense and protection against environmental agents, is typically initiated and executed by innate effector immune cells including macrophages and neutrophils. Previous literature has reported the immune system as a major target of ENM toxicity; however, there is inconsistency regarding the immunotoxicity of ENM. This could be attributed to differences in ENM physicochemical properties, cellular models examined, biocorona formation, etc. Thus, the current study examined the toxicity and immunomodulatory effects of silver nanoparticles (AgNP), one of the most utilized ENM in consumer and medical products, in two key innate immune cell models, e.g. RAW 264.7 cells (macrophages) and differentiated MPRO 2.1 cells (promyelocytes/neutrophils). The results showed that despite a generation of reactive oxygen species, exposure to 20 nm citrate-coated AgNP was not associated with major oxidative damage, inflammatory responses, nor cytotoxicity. Nevertheless, and most importantly, pre-exposure to the AgNP for 24 h enhanced RAW 264.7 cell phagocytic ability as well as the release of inflammatory cytokine interleukin-6 in response to lipopolysaccharide (LPS). In MPRO 2.1 cells, AgNP pre-exposure also resulted in enhanced phagocytic ability; however, these cells manifest reduced cell degranulation (elastase release) and oxidative burst in response to phorbol myristate acetate (PMA). Taken together, these findings indicated to us that exposure to AgNP, despite not being directly (cyto)toxic to these cells, had the potential to alter immune cell responses. The findings underscore the import of assessing immune cell function post-exposure to ENM beyond the standard endpoints such as oxidative stress and cytotoxicity. In addition, these findings further illustrate the importance of understanding the underlying molecular mechanisms of ENM-cellular interactions, particularly in the immune system.

Differences in cytotoxicity of lung epithelial cells exposed to titanium dioxide nanofibers and nanoparticles: Comparison of air-liquid interface and submerged cell cultures

Air Liquid Interface (ALI) system has emerged as a useful tool for toxicity evaluation of nanomaterials related to inhalation since the system mimics the aerosol exposure. We compared the biological responses of lung epithelial cells exposed to titanium dioxide (TiO₂) nanofibers and nanoparticles in ALI and submerged cell cultures systems. Cells were exposed to 2 and 10 μg/cm² for 24 h, 48 h and 72 h and LDH release, TiO₂ internalization, DNA-double strand breaks (DSBs) and ROS production were assessed. LDH release was similar in both systems and particles had higher cytoplasmic uptake in submerged systems. Both TiO₂ types were located in the cytoplasm but nanofibers had nuclear uptake regardless to the system tested. Cells exposed to TiO₂ nanofibers had higher DSBs in the ALI system than in submerged cell cultures but cells exposed to TiO₂ nanoparticles had similar DSBs in both systems. ROS production was higher in cells exposed to TiO₂ nanofibers compared to cells exposed to TiO₂ nanoparticles. In conclusion, cytotoxicity of lung epithelial cells was similar in ALI or submerged cell cultures, however cells exposed to TiO₂ nanofibers displayed higher toxicity than cells exposed to TiO₂ nanoparticles.

Inter-laboratory comparison of pulmonary lesions induced by intratracheal instillation of NiO nanoparticle in rats: Histopathological examination results

OBJECTIVE

In this study, in order to investigate the usefulness of intratracheal instillation in assessing the pulmonary toxicity of nanomaterials, intratracheal instillation of nickel oxide-nanoparticles (NiO-NP) was performed.

METHODS

In this study, rats were administered test materials by intratracheal instillation at five different research institutions in order to assess the validity of using intratracheal instillation for hazard identification of nanomaterials. Eight-week-old male SD rats were administered NiO-NP dispersed in deionized water by a single intratracheal instillation at doses of 0 (vehicle control), 0.2, 0.67, and 2 mg/kg BW. Three days after instillation, histopathological examination of the lungs was performed.

RESULTS

NiO-NP was distributed in the vicinity of hilus of the lung and in the alveoli around the bronchioles. Histopathological changes such as degeneration/necrosis of macrophages, inflammation, and proliferation of type II pneumocyte in the lung were observed, and their severity corresponded with increasing dose. The histopathological observations of pulmonary toxicity were almost similar at each institution.

CONCLUSION

The similarity of the histopathological changes observed by five independent groups indicates that intratracheal instillation can be a useful screening method to detect the pulmonary toxicity of nanomaterials.

Toxic and Genomic Influences of Inhaled Nanomaterials as a Basis for Predicting Adverse Outcome

An immense variety of different types of engineered nanomaterials are currently being developed and increasingly applied to consumer products. Importantly, engineered nanomaterials may pose unexplored adverse health effects because of their small size. Particularly in occupational settings, the dustiness of certain engineered nanomaterials involves risk of inhalation and influences on lung function. These facts call for quick and cost-effective safety testing practices, such as that obtained through multiparametric high-throughput screening using cultured human lung cells. The predictive value of such in vitro-based testing depends partly on the effectiveness of coverage of the mechanisms underlying toxicity effects. The concept of adverse outcome pathways covers the array of causative effects starting from a molecular initiating event via cellular-, organ-, individual-, and population-level effects. Screening for adverse outcome pathway-related effects that drive the eventual toxic outcome provides a good basis for developing predictive testing methods and data-driven integrated testing strategies for hazard and risk assessment. Temporal and inherited genomic changes are likely to drive many adverse responses to engineered nanomaterials, such as multiwalled carbon nanotubes, of which one specific form has recently been evaluated as possibly carcinogenic. Here, we briefly describe current state-of-the-art strategies for analyzing and understanding genomic influences of engineered nanomaterial exposure, including the selected focus on lung disease, and strategies for using mechanistic knowledge to predict and prevent adverse outcome.

Zinc Oxide Nanowires Exposure Induces a Distinct Inflammatory Response via CCL11-Mediated Eosinophil Recruitment

High aspect ratio zinc oxide nanowires (ZnONWs) have become one of the most important products in nanotechnology. The wide range applications of ZnONWs have heightened the need for evaluating the risks and biological consequences to these particles. In this study, we investigated inflammatory pathways activated by ZnONWs in cultured cells as well as the consequences of systemic exposure in mouse models. Confocal microscopy showed rapid phagocytic uptake of FITC-ZnONWs by macrophages. Exposure of macrophages or lung epithelial cells to ZnONWs induced the production of CCL2 and CCL11. Moreover, ZnONWs exposure induced both IL-6 and TNF-α production only in macrophages but not in LKR13 cells. Intratracheal instillation of ZnONWs in C57BL/6 mice induced a significant increase in the total numbers of immune cells in the broncho alveolar lavage fluid (BALFs) 2 days after instillation. Macrophages and eosinophils were the predominant cellular infiltrates of ZnONWs exposed mouse lungs. Similar cellular infiltrates were also observed in a mouse air-pouch model. Pro-inflammatory cytokines IL-6 and TNF-α as well as chemokines CCL11, and CCL2 were increased both in BALFs and air-pouch lavage fluids. These results suggest that exposure to ZnONWs may induce distinct inflammatory responses through phagocytic uptake and formation of soluble Zn²⁺ ions.

Inhalation exposure to multi-walled carbon nanotubes alters the pulmonary allergic response of mice to house dust mite allergen

Background: Increasing evidence from rodent studies indicates that inhaled multi-walled carbon nanotubes (MWCNTs) have harmful effects on the lungs. In this study, we examined the effects of inhalation exposure to MWCNTs on allergen-induced airway inflammation and fibrosis. We hypothesized that inhalation pre-exposure to MWCNTs would render mice susceptible to developing allergic lung disease induced by house dust mite (HDM) allergen. Methods: Male B6C3F1/N mice were exposed by whole-body inhalation for 6 h a day, 5 d a week, for 30 d to air control or 0.06, 0.2, and 0.6 mg/m³ of MWCNTs. The exposure atmospheres were agglomerates (1.4-1.8 µm) composed of MWCNTs (average diameter 16 nm; average length 2.4 µm; 0.52% Ni). Mice then received 25 µg of HDM extract by intranasal instillation 6 times over 3 weeks. Necropsy was performed at 3 and 30 d after the final HDM dose to collect serum, bronchoalveolar lavage fluid (BALF), and lung tissue for histopathology. Results: MWCNT exposure at the highest dose inhibited HDM-induced serum IgE levels, IL-13 protein levels in BALF, and airway mucus production. However, perivascular and peribronchiolar inflammatory lesions were observed in the lungs of mice at 3 d with MWCNT and HDM, but not MWCNT or HDM alone. Moreover, combined HDM and MWCNT exposure increased airway fibrosis in the lungs of mice. Conclusions: Inhalation pre-exposure to MWCNTs inhibited HDM-induced TH2 immune responses, yet this combined exposure resulted in vascular inflammation and airway fibrosis, indicating that MWCNT pre-exposure alters the immune response to allergens.

Airway Exposure to Modified Multi-walled Carbon Nanotubes Perturbs Cardiovascular Adenosinergic Signaling in Mice

The broad list of commercial applications for multi-walled carbon nanotubes (MWCNT) can be further expanded with the addition of various surface chemistry modifications. For example, standard commercial grade MWCNT (C-grade) can be carboxylated (COOH) or nitrogen-doped (N-doped) to suite specific utilities. We previously reported dose-dependent expansions of cardiac ischemia/reperfusion (I/R) injury, 24 h after intratracheal instillation of C-grade, COOH, or N-doped MWCNT in mice. Here, we have tested the hypothesis that airway exposure to MWCNT perturbs cardiovascular adenosinergic signaling, which could contribute to exacerbation of cardiac I/R injury. 100 µL of Vehicle or identical suspension volumes containing 100 µg of C-grade, COOH, or N-doped MWCNT were instilled into the trachea of CD-1 ICR mice. 1 day later, we measured cyclic adenosine monophosphate (cAMP) concentrations in cardiac tissue and evaluated arterial adenosinergic smooth muscle signaling mechanisms related to nitric oxide synthase (NOS) and cyclooxygenase (COX) in isolated aortic tissue. We also verified cardiac I/R injury expansion and examined both lung histology and bronchoalveolar lavage fluid cellularity in MWCNT exposed mice. Myocardial cAMP concentrations were reduced (p < 0.05) in the C-grade group by 17.4% and N-doped group by 13.7% compared to the Vehicle group. Curve fits to aortic ring 2-Cl-Adenosine concentration responses were significantly greater in the MWCNT groups vs. the Vehicle group. Aortic constrictor responses were more pronounced with NOS inhibition and were abolished with COX inhibition. These findings indicate that addition of functional chemical moieties on the surface of MWCNT may alter the biological responses to exposure by influencing cardiovascular adenosinergic signaling and promoting cardiac injury.

The Effects of Gene × Environment Interactions on Silver Nanoparticle Toxicity in the Respiratory System

Silver nanoparticles (AgNP) are used in multiple applications but primarily in the manufacturing of antimicrobial products. AgNP toxicity in the respiratory system is well characterized, but few in vitro or in vivo studies have evaluated the effects of interactions between host genetic and acquired factors or gene × environment interactions (G × E) on AgNP toxicity in the respiratory system. The primary goal of this article is to review host genetic and acquired factors identified across in vitro and in vivo studies and prioritize those necessary for defining exposure limits to protect all populations. The impact of these exposures and the work being done to address the current limited protections are also discussed. Future research on G × E effects on AgNP toxicity is warranted and will assist with informing regulatory or recommended exposure limits that enforce special protections for all populations to AgNP exposures in occupational settings.

Comparative analysis of toxicity reduction of wastewater in twelve industrial park wastewater treatment plants based on battery of toxicity assays

Wastewater treatment plants (WWTPs) in industrial parks provide centralized treatment for industrial and domestic wastewater. However, the information on toxicity reduction of wastewater and its correlation with treatment process in industrial park is limited. This study compared the toxicity reduction of wastewater in 12 industrial park WWTPs based on battery of toxicity assays. Nine toxic endpoints involving microorganism, phytoplankton, zooplankton, plant and human cell lines were applied. All the influents of WWTPs induced high toxicities, which were significantly reduced after the treatments from 7 of the studied WWTPs. However, the effluents of five WWTPs induced higher toxicity in one or more toxic endpoints compared to the influents. This study also found that most of anaerobic-anoxic-oxic (A²/O)-based processes had good removal efficiency of wastewater toxicity, while the sequencing batch reactor (SBR)-based processes had the lowest removal efficiency. Moreover, low correlation coefficients were obtained among all toxic endpoints, indicating that battery of toxicity assays was necessary to completely characterize the toxicity and risk of wastewater in industrial parks. This study shed new lights to the toxicity reduction of wastewater and its correlation with treatment process, which is very useful for the design, management and operation of WWTPs in industrial parks.

Advances in materials for cellular applications (Review)

The goal of this review is to highlight materials that show exciting promise for either entirely new cellular-level applications or new approaches to long-standing biological challenges. The authors start with two more established materials, graphene and carbon nanotubes, and then progress to conducting polymers, followed by an overview of the microresonators, nanowires, and spasers used as intracellular lasers. These materials provide new approaches to gene and drug delivery, cellular regeneration, mechanical sensing, imaging, and the modulation and recording of cellular activity. Of specific interest is the comparison of these materials with existing technologies, the method of cellular delivery, and the all-encompassing challenge of biocompatibility. Concluding remarks examine the extension of these materials from cellular-level experiments to in vivo applications, including the method of activation: light, electricity, and ultrasound. Overall, these materials and their associated applications illustrate the most recent advances in material-cell interactions.

Retracted: Pulmonary fibrosis of mice and its molecular mechanism following chronic inhaled exposure to TiO2 nanoparticles

Nanoparticulate titanium dioxide (nano-TiO2 ) has been widely used in industry, medicine and daily life. However, assessment of nano-TiO2 toxicity on health is an important occupational safety issue. Numerous studies have demonstrated that nano-TiO2 can induced sustained pulmonary inflammation, but whether chronic exposure to nano-TiO2 results in pulmonary fibrosis is unclear. In this study, therefore, nano-TiO2 was administered to the male mice by nasal administration for six consecutive months, the inflammatory and/or fibrogenic responses induced by nano-TiO2 were investigated. The results showed that chronic inhaled nano-TiO2 induced pulmonary inflammation and firosis, increased expression of inflammatory cytokines and fibrotic cytokines including nuclear factor-κB, interleukin-1β, tumor necrosis factor-α, monocyte chemotactic protein 1, macrophage inflammatory protein-2, intercellular adhesion molecule 1, vascular cell adhesion molecule 1, transform growth factor -β1, osteopontin, matrix metalloproteinase-1, -2, -3, and -9, tissue inhibitors of metalloproteinase-1, collagen, platelet derived growth factor, and connective tissue growth factor in mouse lung. Taken together, nano-TiO2 -induced pulmonary inflammation and fibrosis are closely associated with increased expression of inflammatory and/or fibrotic cytokines, an imbalanced production of MMPs and TIMP-1 that favors fibrosis in mice, implying that nano-TiO2 may lead to potential health effects.

Microvascular Dysfunction Following Multiwalled Carbon Nanotube Exposure Is Mediated by Thrombospondin-1 Receptor CD47

Pulmonary exposure to multiwalled carbon nanotubes (MWCNTs) disrupts peripheral microvascular function. Thrombospondin-1 (TSP-1) is highly expressed during lung injury and has been shown to alter microvascular reactivity. It is unclear exactly how TSP-1 exerts effects on vascular function, but we hypothesized that the TSP-1 receptor CD47 may mediate changes in vasodilation. Wildtype (WT) or CD47 knockout (CD47 KO) C57B6/J-background animals were exposed to 50 µg of MWCNT or saline control via pharyngeal aspiration. Twenty-four hours postexposure, intravital microscopy was performed to assess arteriolar dilation and venular leukocyte adhesion and rolling. To assess tissue redox status, electron paramagnetic resonance and NOx measurements were performed, while inflammatory biomarkers were measured via multiplex assay.Vasodilation was impaired in the WT + MWCNT group compared with control (57 ± 9 vs 90 ± 2% relaxation), while CD47 KO animals showed no impairment (108 ± 8% relaxation). Venular leukocyte adhesion and rolling increased by >2-fold, while the CD47 KO group showed no change. Application of the antioxidant apocynin rescued normal leukocyte activity in the WT + MWCNT group. Lung and plasma NOx were reduced in the WT + MWCNT group by 47% and 32%, respectively, while the CD47 KO groups were unchanged from control. Some inflammatory cytokines were increased in the CD47 + MWCNT group only. In conclusion, TSP-1 is an important ligand mediating MWCNT-induced microvascular dysfunction, and CD47 is a component of this dysregulation. CD47 activation likely disrupts nitric oxide (•NO) signaling and promotes leukocyte-endothelial interactions. Impaired •NO production, signaling, and bioavailability is linked to a variety of cardiovascular diseases in which TSP-1/CD47 may play an important role.

Basic study of intratracheal instillation study of nanomaterials for the estimation of the hazards of nanomaterials

In order to examine the usefulness of intratracheal instillation of nanoparticles for the screening of the harmful effects of nanoparticles, we performed intratracheal instillation studies of nanomaterials on rats using different delivery devices and postures as a basic study. Multiwall carbon nanotubes (MWCNTs) with a geometric mean length and secondary diameter of 2.16 μm and 752 nm, respectively, were used as the nanomaterials. Male F344 rats were intratracheally exposed to 0.04 or 0.2 mg/rat of MWCNT, were dissected at 1 d and 3 d, and cell analyses of the bronchoalveolar lavage fluid (BALF) were analyzed. Two delivery devices were used for the intratracheal instillation of the MWCNTs: a gavage needle and a microsprayer aerolizer. Both induced neutrophil influx in the lung at 1 and 3 d, and there were no significant differences in neutrophil inflammation between the two delivery devices. The main distribution of pulmonary inflammation by both delivery devices was in the centrilobular spaces in the lung. Two postures were used: an angle of approximately 45 degrees and a standing posture on a board, both of which also induced pulmonary influx in BALF and pulmonary inflammation mainly in the centrilobular spaces, with no large difference in pulmonary inflammation between the two postures. Taken together, the differences in the delivery devices and postures of the rats in the intratracheal instillation did not affect the acute pulmonary toxicity of the nanomaterials.

Mechanisms of carbon nanotube-induced pulmonary fibrosis: a physicochemical characteristic perspective

Carbon nanotubes (CNTs) are engineered nanomaterials (ENMs) with numerous beneficial applications. However, they could pose a risk to human health from occupational or consumer exposures. Rodent models demonstrate that exposure to CNTs via inhalation, instillation, or aspiration results in pulmonary fibrosis. The severity of the fibrogenic response is determined by various physicochemical properties of the nanomaterial such as residual metal catalyst content, rigidity, length, aggregation status, or surface charge. CNTs are also increasingly functionalized post-synthesis with organic or inorganic agents to modify or enhance surface properties. The mechanisms of CNT-induced fibrosis involve oxidative stress, innate immune responses of macrophages, cytokine and growth factor production, epithelial cell injury and death, expansion of the pulmonary myofibroblast population, and consequent extracellular matrix accumulation. A comprehensive understanding of how physicochemical properties affect the fibrogenic potential of various types of CNTs should be considered in combination with genetic variability and gain or loss of function of specific genes encoding secreted cytokines, enzymes, or intracellular cell signaling molecules. Here, we cover the current state of the literature on mechanisms of CNT-exposed pulmonary fibrosis in rodent models with a focus on physicochemical characteristics as principal drivers of the mechanisms leading to pulmonary fibrosis. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials.

A quantitative framework to group nanoscale and microscale particles by hazard potency to derive occupational exposure limits: Proof of concept evaluation

The large and rapidly growing number of engineered nanomaterials (ENMs) presents a challenge to assessing the potential occupational health risks. An initial database of 25 rodent studies including 1929 animals across various experimental designs and material types was constructed to identify materials that are similar with respect to their potency in eliciting neutrophilic pulmonary inflammation, a response relevant to workers. Doses were normalized across rodent species, strain, and sex as the estimated deposited particle mass dose per gram of lung. Doses associated with specific measures of pulmonary inflammation were estimated by modeling the continuous dose-response relationships using benchmark dose modeling. Hierarchical clustering was used to identify similar materials. The 18 nanoscale and microscale particles were classified into four potency groups, which varied by factors of approximately two to 100. Benchmark particles microscale TiO2 and crystalline silica were in the lowest and highest potency groups, respectively. Random forest methods were used to identify the important physicochemical predictors of pulmonary toxicity, and group assignments were correctly predicted for five of six new ENMs. Proof-of-concept was demonstrated for this framework. More comprehensive data are needed for further development and validation for use in deriving categorical occupational exposure limits.

The Genetic Heterogeneity among Different Mouse Strains Impacts the Lung Injury Potential of Multiwalled Carbon Nanotubes

Genetic variation constitutes an important variable impacting the susceptibility to inhalable toxic substances and air pollutants, as reflected by epidemiological studies in humans and differences among animal strains. While multiwalled carbon nanotubes (MWCNTs) are capable of causing lung fibrosis in rodents, it is unclear to what extent the genetic variation in different mouse strains influence the outcome. Four inbred mouse strains, including C57Bl/6, Balb/c, NOD/ShiLtJ, and A/J, to test the pro-fibrogenic effects of a library of MWCNTs in vitro and in vivo are chosen. Ex vivo analysis of IL-1β production in bone marrow-derived macrophages (BMDMs) as molecular initiating event (MIE) is performed. The order of cytokine production (Balb/c > A/J > C57Bl/6 > NOD/ShiLtJ) in BMDMs is also duplicated during assessment of IL-1β production in the bronchoalveolar lavage fluid of the same mouse strains 40 h after oropharyngeal instillation of a representative MWCNT. Animal test after 21 d also confirms a similar hierarchy in TGF-β1 production and collagen deposition in the lung. Statistical analysis confirms a correlation between IL-1β production in BMDM and the lung fibrosis. All considered, these data demonstrate that genetic background indeed plays a major role in determining the pro-fibrogenic response to MWCNTs in the lung.

Genetic susceptibility to toxicologic lung responses among inbred mouse strains following exposure to carbon nanotubes and profiling of underlying gene networks

The risk of human exposure to fiber nanoparticles has risen in recent years due to increases in the manufacture and utilization of carbon nanotubes (CNTs). CNTs are present as airborne particulates in occupational settings and their hazard potential has been demonstrated in experimental lung exposure studies using inbred mouse strains. However, it is not known whether different inbred strains differ in lung responses to CNTs by virtue of their genetics. In this work, common inbred strains (BALB/c, C57Bl/6, DBA/2, and C3H/He) were exposed to CNTs via oropharyngeal aspiration and lung histology and bronchoalveolar lavage (BAL) samples were evaluated over 28days with the objective of evaluating sensitivity/resistance among strains. C57Bl/6 mice developed significantly more extensive type II pneumocyte (T2P) hyperplasia and alveolar infiltrate compared to DBA/2 mice, which were resistant. Surprisingly, DBA/2 but not C57Bl/6 mice were extremely sensitive to increases in leukocytes recovered in BAL fluid. Underlying global gene expression patterns in the two strains were compared using mRNA sequencing to investigate regulatory networks associated with the different effects. The impact of exposure on gene networks regulating various aspects of immune response and cell survival was limited in DBA/2 mice compared to C57Bl/6. Investigation of B6D2F1 (C57Bl/6×DBA/2 hybrid) mice demonstrated inheritance of sensitivity to CNT exposures in regard to toxicologic lung pathology and BAL leukocyte accumulations. These findings demonstrate a genetic basis of susceptibility to CNT particle exposures and both inform the use of inbred mouse models and suggest the likelihood of differences in genetic susceptibility among humans.

Heterogeneous Vascular Bed Responses to Pulmonary Titanium Dioxide Nanoparticle Exposure

A growing body of research links engineered nanomaterial (ENM) exposure to adverse cardiovascular endpoints. The purpose of this study was to evaluate the impact of ENM exposure on vascular reactivity in discrete segments so that we may determine the most sensitive levels of the vasculature where these negative cardiovascular effects are manifest. We hypothesized that acute nano-TiO₂ exposure differentially affects reactivity with a more robust impairment in the microcirculation. Sprague-Dawley rats (8–10 weeks) were exposed to nano-TiO₂via intratracheal instillation (20, 100, or 200 µg suspended per 250 µL of vehicle) 24 h prior to vascular assessments. A serial assessment across distinct compartments of the vascular tree was then conducted. Wire myography was used to evaluate macrovascular active tension generation specifically in the thoracic aorta, the femoral artery, and third-order mesenteric arterioles. Pressure myography was used to determine vascular reactivity in fourth- and fifth-order mesenteric arterioles. Vessels were treated with phenylephrine, acetylcholine (ACh), and sodium nitroprusside. Nano-TiO₂ exposure decreased endothelium-dependent relaxation in the thoracic aorta and femoral arteries assessed via ACh by 53.96 ± 11.6 and 25.08 ± 6.36%, respectively. Relaxation of third-order mesenteric arterioles was impaired by 100 and 20 µg nano-TiO₂ exposures with mean reductions of 50.12 ± 8.7 and 68.28 ± 8.7%. Cholinergic reactivity of fourth- and fifth-order mesenteric arterioles was negatively affected by nano-TiO₂ with diminished dilations of 82.86 ± 12.6% after exposure to 200 µg nano-TiO₂, 42.6 ± 12.6% after 100 µg nano-TiO₂, and 49.4 ± 12.6% after 20 µg nano-TiO₂. Endothelium-independent relaxation was impaired in the thoracic aorta by 34.05 ± 25% induced by exposure to 200 µg nano-TiO₂ and a reduction in response of 49.31 ± 25% caused by 100 µg nano-TiO₂. Femoral artery response was reduced by 18 ± 5%, while third-order mesenteric arterioles were negatively affected by 20 µg nano-TiO₂ with a mean decrease in response of 38.37 ± 10%. This is the first study to directly compare the differential effect of ENM exposure on discrete anatomical segments of the vascular tree. Pulmonary ENM exposure produced macrovascular and microvascular dysfunction resulting in impaired responses to endothelium-dependent, endothelium-independent, and adrenergic agonists with a more robust dysfunction at the microvascular level. These results provide additional evidence of an endothelium-dependent and endothelium-independent impairment in vascular reactivity.

Facilitating Translational Nanomedicine via Predictive Safety Assessment

Extensive research on engineered nanomaterials (ENMs) has led to the development of numerous nano-based formulations for theranostic purposes. Although some nano-based drug delivery systems already exist on the market, growing numbers of newly designed ENMs exhibit improved physicochemical properties and are being assessed in preclinical stages. While these ENMs are designed to improve the efficacy of current nano-based therapeutic or imaging systems, it is necessary to thoroughly determine their safety profiles for successful clinical applications. As such, our aim in this mini-review is to discuss the current knowledge on predictive safety and structure-activity relationship (SAR) analysis of major ENMs at the developing stage, as well as the necessity of additional long-term toxicological analysis that would help to facilitate their transition into clinical practices. We focus on how the interaction of these nanomaterials with cells would trigger signaling pathways as molecular initiating events that lead to adverse outcomes. These mechanistic understandings would help to design safer ENMs with improved therapeutic efficacy in clinical settings.

Structure Activity Relationships of Engineered Nanomaterials in inducing NLRP3 Inflammasome Activation and Chronic Lung Fibrosis

It has been demonstrated that certain engineered nanomaterials (ENMs) could induce chronic lung inflammation and fibrosis, however, the key structure activity relationships (SARs) that the link the physicochemical properties and the fibrogenic effects have not been thoroughly reviewed. Recently, significant progress has been made in our understanding of the SAR, and it has been demonstrated that ENMs including rare earth oxides (REOs), graphene and graphene oxides (GO), fumed silica, as well as high aspect ratio materials (such as CNTs and CeO₂ nanowires etc.) could trigger the NLRP3 inflammasome activation and IL-1β production in macrophages and subsequent series of profibrogenic cytokines, i.e. TGF-β1 and PDGF-AA in vitro and in vivo, resulting in synergistically cell-cell communication among macrophages, epithelial cells, and fibroblasts in a process named epithelial-mesenchymal transition (EMT) and collagen deposition in the lung as the adverse outcomes. Interestingly, different ENMs engage a range of distinct pathways leading to the NLRP3 inflammasome activation and IL-1β production in macrophages, which include frustrated phagocytosis, physical piercing, plasma membrane perturbation or damage to lysosomes due to high aspect ratio, particle structure, surface reactivity, transformation, etc. Furthermore, ENM's properties determine the biopersistence in vivo, which also play a major role in chronic lung fibrosis. Based on these progresses, we reviewed recent findings in the literature on the major SARs leading to chronic lung effects.

Thrombospondin-1 mediates multi-walled carbon nanotube induced impairment of arteriolar dilation

Pulmonary exposure to multi-walled carbon nanotubes (MWCNT) has been shown to disrupt endothelium-dependent arteriolar dilation in the peripheral microcirculation. The molecular mechanisms behind these arteriolar disruptions have yet to be fully elucidated. The secreted matricellular matrix protein thrombospondin-1 (TSP-1) is capable of moderating arteriolar vasodilation by inhibiting soluble guanylate cyclase activity. We hypothesized that TSP-1 may be a link between nanomaterial exposure and observed peripheral microvascular dysfunction. To test this hypothesis, wild-type C57B6J (WT) and TSP-1 knockout (KO) mice were exposed via lung aspiration to 50 μg MWCNT or a Sham dispersion medium control. Following exposure (24 h), arteriolar characteristics and reactivity were measured in the gluteus maximus muscle using intravital microscopy (IVM) coupled with microiontophoretic delivery of acetylcholine (ACh) or sodium nitroprusside (SNP). In WT mice exposed to MWCNT, skeletal muscle TSP-1 protein increased > fivefold compared to Sham exposed, and exhibited a 39% and 47% decrease in endothelium-dependent and -independent vasodilation, respectively. In contrast, TSP-1 protein was not increased following MWCNT exposure in KO mice and exhibited no loss in dilatory capacity. Microvascular leukocyte-endothelium interactions were measured by assessing leukocyte adhesion and rolling activity in third order venules. The WT + MWCNT group demonstrated 223% higher leukocyte rolling compared to the WT + Sham controls. TSP-1 KO animals exposed to MWCNT showed no differences from the WT + Sham control. These data provide evidence that TSP-1 is likely a central mediator of the systemic microvascular dysfunction that follows pulmonary MWCNT exposure.

Inhalation of gas metal arc-stainless steel welding fume promotes lung tumorigenesis in A/J mice

Epidemiologic studies suggest an increased risk of lung cancer with exposure to welding fumes, but controlled animal studies are needed to support this association. Oropharyngeal aspiration of collected "aged" gas metal arc-stainless steel (GMA-SS) welding fume has been shown by our laboratory to promote lung tumor formation in vivo using a two-stage initiation-promotion model. Our objective in this study was to determine whether inhalation of freshly generated GMA-SS welding fume also acts as a lung tumor promoter in lung tumor-susceptible mice. Male A/J mice received intraperitoneal (IP) injections of corn oil or the chemical initiator 3-methylcholanthrene (MCA; 10 µg/g) and 1 week later were exposed by whole-body inhalation to air or GMA-SS welding aerosols for 4 h/d × 4 d/w × 9 w at a target concentration of 40 mg/m³. Lung nodules were enumerated at 30 weeks post-initiation. GMA-SS fume significantly promoted lung tumor multiplicity in A/J mice initiated with MCA (16.11 ± 1.18) compared to MCA/air-exposed mice (7.93 ± 0.82). Histopathological analysis found that the increased number of lung nodules in the MCA/GMA-SS group were hyperplasias and adenomas, which was consistent with developing lung tumorigenesis. Metal deposition analysis in the lung revealed a lower deposited dose, approximately fivefold compared to our previous aspiration study, still elicited a significant lung tumorigenic response. In conclusion, this study demonstrates that inhaling GMA-SS welding fume promotes lung tumorigenesis in vivo which is consistent with the epidemiologic studies that show welders may be at an increased risk for lung cancer.

Toxicological Effects of Carbon Nanotubes

The rapidly evolving field of nanotechnology offers many potential societal and economic benefits. Carbon Nanotubes (CNTs) are one of the most widely produced engineered nanomaterials and have diverse applications in engineering, electronics, and medicine. They have also been extensively investigated for their toxicological properties. Studies with rodents indicate that CNTs can cause lung fibrosis or granuloma formation, exacerbate pre-existing respiratory disease, cause injury to the sensitive pleural lining of the lungs, and have systemic immunosuppressive effects. CNTs have also been reported to cause genotoxic effects on cultured cells. The fiber-like structure of CNTs has led to comparisons with asbestos fibers; yet the debate over whether CNTs cause mesothelioma remains highly controversial, and evidence thus far is lacking. The aim of this chapter is to overview the evidence in rodent models that CNTs cause lung disease and to discuss the potential of CNTs to cause adverse immune, fibrogenic, or carcinogenic effects in humans as a result of occupational, consumer, or environmental exposure.

Evaluating the mechanistic evidence and key data gaps in assessing the potential carcinogenicity of carbon nanotubes and nanofibers in humans

In an evaluation of carbon nanotubes (CNTs) for the IARC Monograph 111, the Mechanisms Subgroup was tasked with assessing the strength of evidence on the potential carcinogenicity of CNTs in humans. The mechanistic evidence was considered to be not strong enough to alter the evaluations based on the animal data. In this paper, we provide an extended, in-depth examination of the in vivo and in vitro experimental studies according to current hypotheses on the carcinogenicity of inhaled particles and fibers. We cite additional studies of CNTs that were not available at the time of the IARC meeting in October 2014, and extend our evaluation to include carbon nanofibers (CNFs). Finally, we identify key data gaps and suggest research needs to reduce uncertainty. The focus of this review is on the cancer risk to workers exposed to airborne CNT or CNF during the production and use of these materials. The findings of this review, in general, affirm those of the original evaluation on the inadequate or limited evidence of carcinogenicity for most types of CNTs and CNFs at this time, and possible carcinogenicity of one type of CNT (MWCNT-7). The key evidence gaps to be filled by research include: investigation of possible associations between in vitro and early-stage in vivo events that may be predictive of lung cancer or mesothelioma, and systematic analysis of dose-response relationships across materials, including evaluation of the influence of physico-chemical properties and experimental factors on the observation of nonmalignant and malignant endpoints.

Engineered nanomaterial-induced lysosomal membrane permeabilization and anti-cathepsin agents

Engineered nanomaterials (ENMs), or small anthropogenic particles approximately < 100 nm in size and of various shapes and compositions, are increasingly incorporated into commercial products and used for industrial and medical purposes. There is an exposure risk to both the population at large and individuals in the workplace with inhalation exposures to ENMs being a primary concern. Further, there is increasing evidence to suggest that certain ENMs may represent a significant health risk, and many of these ENMs exhibit distinct similarities with other particles and fibers that are known to induce adverse health effects, such as asbestos, silica, and particulate matter (PM). Evidence regarding the importance of lysosomal membrane permeabilization (LMP) and release of cathepsins in ENM toxicity has been accumulating. The aim of this review was to describe our current understanding of the mechanisms leading to ENM-associated pathologies, including LMP and the role of cathepsins with a focus on inflammation. In addition, anti-cathepsin agents, some of which have been tested in clinical trials and may prove useful for ameliorating the harmful effects of ENM exposure, are examined.

From Dose to Response: In Vivo Nanoparticle Processing and Potential Toxicity

Adverse human health impacts due to occupational and environmental exposures to manufactured nanoparticles are of concern and pose a potential threat to the continued industrial use and integration of nanomaterials into commercial products. This chapter addresses the inter-relationship between dose and response and will elucidate on how the dynamic chemical and physical transformation and breakdown of the nanoparticles at the cellular and subcellular levels can lead to the in vivo formation of new reaction products. The dose-response relationship is complicated by the continuous physicochemical transformations in the nanoparticles induced by the dynamics of the biological system, where dose, bio-processing, and response are related in a non-linear manner. Nanoscale alterations are monitored using high-resolution imaging combined with in situ elemental analysis and emphasis is placed on the importance of the precision of characterization. The result is an in-depth understanding of the starting particles, the particle transformation in a biological environment, and the physiological response.

Silver Nanoparticle-Directed Mast Cell Degranulation Is Mediated through Calcium and PI3K Signaling Independent of the High Affinity IgE Receptor

Engineered nanomaterial (ENM)-mediated toxicity often involves triggering immune responses. Mast cells can regulate both innate and adaptive immune responses and are key effectors in allergic diseases and inflammation. Silver nanoparticles (AgNPs) are one of the most prevalent nanomaterials used in consumer products due to their antimicrobial properties. We have previously shown that AgNPs induce mast cell degranulation that was dependent on nanoparticle physicochemical properties. Furthermore, we identified a role for scavenger receptor B1 (SR-B1) in AgNP-mediated mast cell degranulation. However, it is completely unknown how SR-B1 mediates mast cell degranulation and the intracellular signaling pathways involved. In the current study, we hypothesized that SR-B1 interaction with AgNPs directs mast cell degranulation through activation of signal transduction pathways that culminate in an increase in intracellular calcium signal leading to mast cell degranulation. For these studies, we utilized bone marrow-derived mast cells (BMMC) isolated from C57Bl/6 mice and RBL-2H3 cells (rat basophilic leukemia cell line). Our data support our hypothesis and show that AgNP-directed mast cell degranulation involves activation of PI3K, PLCγ and an increase in intracellular calcium levels. Moreover, we found that influx of extracellular calcium is required for the cells to degranulate in response to AgNP exposure and is mediated at least partially via the CRAC channels. Taken together, our results provide new insights into AgNP-induced mast cell activation that are key for designing novel ENMs that are devoid of immune system activation.

Pulmonary responses in rat lungs after intratracheal instillation of 4 crystal forms of titanium dioxide nanoparticles

OBJECTIVE

Titanium dioxide nanoparticles are widely used as UV filters in cosmetics and as a photocatalyst. We evaluated pulmonary responses to different crystal forms of TiO2 nanoparticles.

METHODS

We used 4 different TiO2 samples with similar specific surface areas (anatase, rutile, amorphous, and P25). Each sample was suspended in distilled water and intratracheally instilled to male Wister rats at the dose of 1 mg per rat. Five rats per group were sacrificed at 3 days, 1 month, and 6 months after instillation, and bronchoalveolar lavage fluid was collected from the right lung to determine the total cell count and polymorphonuclear cell (PMN) counts. The left lung tissues were stained with hematoxylin and eosin for the evaluation of inflammation and with elastica van Gieson for the evaluation of collagen deposition.

RESULTS

The total cell counts and PMN counts of the amorphous and P25 of four samples showed a significant increase compared with the control group at 3 days after instillation. The inflammation rate of P25 also showed a significant increase compared with controls at 3 days. The collagen deposition rate in the alveolar duct of P25 increased significantly compared with controls from 3 days to 6 months. The other samples showed a mild response after instillation.

CONCLUSION

Although the TiO2 nanoparticles used in this study had similar specific surface areas, there were different inflammatory responses in the rat lungs. Other factors, such as different production processes or the surface activities of particles, may have been responsible for the different responses.

The pulmonary inflammatory response to multiwalled carbon nanotubes is influenced by gender and glutathione synthesis

Inhalation of multiwalled carbon nanotubes (MWCNTs) during their manufacture or incorporation into various commercial products may cause lung inflammation, fibrosis, and oxidative stress in exposed workers. Some workers may be more susceptible to these effects because of differences in their ability to synthesize the major antioxidant and immune system modulator glutathione (GSH). Accordingly, in this study we examined the influence of GSH synthesis and gender on MWCNT-induced lung inflammation in C57BL/6 mice. GSH synthesis was impaired through genetic manipulation of Gclm, the modifier subunit of glutamate cysteine ligase, the rate-limiting enzyme in GSH synthesis. Twenty-four hours after aspirating 25µg of MWCNTs, all male mice developed neutrophilia in their lungs, regardless of Gclm genotype. However, female mice with moderate (Gclm heterozygous) and severe (Gclm null) GSH deficiencies developed significantly less neutrophilia. We found no indications of MWCNT-induced oxidative stress as reflected in the GSH content of lung tissue and epithelial lining fluid, 3-nitrotyrosine formation, or altered mRNA or protein expression of several redox-responsive enzymes. Our results indicate that GSH-deficient female mice are rendered uniquely susceptible to an attenuated neutrophil response. If the same effects occur in humans, GSH-deficient women manufacturing MWCNTs may be at greater risk for impaired neutrophil-dependent clearance of MWCNTs from the lung. In contrast, men may have effective neutrophil-dependent clearance, but may be at risk for lung neutrophilia regardless of their GSH levels.

Alternative Testing Strategies for Nanomaterials: State of the Science and Considerations for Risk Analysis

The rapid growth of the nanotechnology industry has warranted equal progress in the nanotoxicology and risk assessment fields. In vivo models have traditionally been used to determine human and environmental risk for chemicals; however, the use of these tests has limitations, and there are global appeals to develop reliable alternatives to animal testing. Many have investigated the use of alternative (nonanimal) testing methods and strategies have quickly developed and resulted in the generation of large toxicological data sets for numerous nanomaterials (NMs). Due to the novel physicochemical properties of NMs that are related to surface characteristics, the approach toward toxicity test development has distinct considerations from traditional chemicals, bringing new requirements for adapting these approaches for NMs. The methodical development of strategies that combine multiple alternative tests can be useful for predictive NM risk assessment and help screening-level decision making. This article provides an overview of the main developments in alternative methods and strategies for reducing uncertainty in NM risk assessment, including advantages and disadvantages of in vitro, ex vivo, and in silico methods, and examples of existing comprehensive strategies. In addition, knowledge gaps are identified toward improvements for experimental and strategy design, specifically highlighting the need to represent realistic exposure scenarios and to consider NM-specific concerns such as characterization, assay interferences, and standardization. Overall, this article aims to improve the reliability and utility of alternative testing methods and strategies for risk assessment of manufactured NMs.

Atomic layer deposition coating of carbon nanotubes with zinc oxide causes acute phase immune responses in human monocytes in vitro and in mice after pulmonary exposure

Background

Atomic layer deposition (ALD) is a method for applying conformal nanoscale coatings on three-dimensional structures. We hypothesized that surface functionalization of multi-walled carbon nanotubes (MWCNTs) with polycrystalline ZnO by ALD would alter pro-inflammatory cytokine expression by human monocytes in vitro and modulate the lung and systemic immune response following oropharyngeal aspiration in mice.

Methods

Pristine (U-MWCNTs) were coated with alternating doses of diethyl zinc and water over increasing ALD cycles (10 to 100 ALD cycles) to yield conformal ZnO-coated MWCNTs (Z-MWCNTs). Human THP-1 monocytic cells were exposed to U-MWCNTs or Z-MWCNTs in vitro and cytokine mRNAs measured by Taqman real-time RT-PCR. Male C57BL6 mice were exposed to U- or Z-MWCNTs by oropharyngeal aspiration (OPA) and lung inflammation evaluated at one day post-exposure by histopathology, cytokine expression and differential counting of cells in bronchoalveolar lavage fluid (BALF) cells. Lung fibrosis was evaluated at 28 days. Cytokine mRNAs (IL-6, IL-1β, CXCL10, TNF-α) in lung, heart, spleen, and liver were quantified at one and 28 days. DNA synthesis in lung tissue was measured by bromodeoxyuridine (BrdU) uptake.

Results

ALD resulted in a conformal coating of MWCNTs with ZnO that increased proportionally to the number of coating cycles. Z-MWCNTs released Zn⁺² ions in media and increased IL-6, IL-1β, CXCL10, and TNF-α mRNAs in THP-1 cells in vitro. Mice exposed to Z-MWCNTs by OPA had exaggerated lung inflammation and a 3-fold increase in monocytes and neutrophils in BALF compared to U-MWCNTs. Z-MWCNTs, but not U-MWCNTs, induced IL-6 and CXCL10 mRNA and protein in the lungs of mice and increased IL-6 mRNA in heart and liver. U-MWCNTs but not Z-MWCNTs stimulated airway epithelial DNA synthesis in vivo. Lung fibrosis at 28 days was not significantly different between mice treated with U-MWCNT or Z-MWCNT.

Conclusions

Pulmonary exposure to ZnO-coated MWCNTs produces a systemic acute phase response that involves the release of Zn⁺², lung epithelial growth arrest, and increased IL-6. ALD functionalization with ZnO generates MWCNTs that possess increased risk for human exposure.

Electronic supplementary material

The online version of this article (doi:10.1186/s12989-016-0141-9) contains supplementary material, which is available to authorized users.