Survival of MS2 and Φ6 viruses in droplets as a function of relative humidity, pH, and salt, protein, and surfactant concentrations

Definition of a concentration and RNA extraction protocol for optimal whole genome sequencing of SARS-CoV-2 in wastewater (ANRS0160)

Monitoring the presence of RNA from emerging pathogenic viruses, such as SARS-CoV-2, in wastewater (WW) samples requires suitable methods to ensure an effective response. Genome sequencing of WW is one of the crucial methods, but it requires high-quality RNA in sufficient quantities, especially for monitoring emerging variants. Consequently, methods for viral concentration and RNA extraction from WW samples have to be optimized before sequencing. The purpose of this study was to achieve high coverage (≥ 90 %) and sequencing depth (at least ≥200×) even for low initial RNA concentrations (< 105 genome copies (GC)/L) in WW. A further objective was to determine the range of SARS-CoV-2 RNA concentrations that allow high-quality sequencing, and the optimal sample volume for analysis. Ultrafiltration (UF) methods were used to concentrate viral particles from large influent samples (up to 500 mL). An RNA extraction protocol using silica beads, neutral phenol-chloroform treatment, and a PCR inhibitor removal kit was chosen for its effectiveness in extracting RNA and eliminating PCR inhibitors, as well as its adaptability for use with large influent samples. Recovery rates ranged from 24 % to 63 % (N = 17) for SARS-CoV-2 naturally present in WW samples. 200 mL WW samples can be enough for UF concentration, as they showed high quality sequencing analyses with between 5 × 104 GC/L and 6 × 103 GC/L. Below 6 × 103 GC/L, high-quality sequencing was also achieved for ∼40 % of the samples using 500 mL of WW. Sequencing analysis for variant detection was performed on 200 mL WW samples with coverage of >95 % and sequencing depth of >1000×. Analyses revealed the predominance of variant EG.5, known as Eris (66 %-100 %). The use of UF methods in combination with a suitable RNA extraction protocol appear promising for sequencing enveloped viruses in WW in a context of viral emergence.

Salt Supersaturation as an Accelerator of Influenza A Virus Inactivation in 1 μL Droplets

Influenza A virus (IAV) spreads through exhaled aerosol particles and larger droplets. Estimating the stability of IAV is challenging and depends on factors such as the respiratory matrix and drying kinetics. Here, we combine kinetic experiments on millimeter-sized saline droplets with a biophysical aerosol model to quantify the impact of NaCl on IAV stability. We show that IAV inactivation is determined by NaCl concentration, which increases during water evaporation and then decreases again when efflorescence occurs. When drying in air with relative humidity RH = 30%, inactivation follows an inverted sigmoidal curve, with inactivation occurring most rapidly when the NaCl concentration exceeds 20 mol/(kg H2O) immediately prior to efflorescence. Efflorescence reduces the NaCl molality to saturated conditions, resulting in a significantly reduced inactivation rate. We demonstrate that the inactivation rate k depends exponentially on NaCl molality, and after the solution reaches equilibrium, the inactivation proceeds at a first-order rate. Introducing sucrose, an organic cosolute, attenuates IAV inactivation via two mechanisms: first by decreasing the NaCl molality during the drying phase and second by a protective effect against the NaCl-induced inactivation. For both pure saline and sucrose-containing droplets, our biophysical model ResAM accurately simulates the inactivation when NaCl molality is used as the only inactivating factor. This study highlights the role of NaCl molality in IAV inactivation and provides a mechanistic basis for the observed inactivation rates.

Assessing infectivity of emerging enveloped viruses in wastewater and sewage sludge: Relevance and procedures

The emergence of SARS-CoV-2 has heightened the need to evaluate the detection of enveloped viruses in the environment, particularly in wastewater, within the context of wastewater-based epidemiology. The studies published over the past 80 years focused primarily on non-enveloped viruses due to their ability to survive longer in environmental matrices such as wastewater or sludge compared to enveloped viruses. However, different enveloped viruses survive in the environment for different lengths of time. Therefore, it is crucial to be prepared to assess the potential infectious risk that may arise from future emerging enveloped viruses. This will require appropriate tools, notably suitable viral concentration methods that do not compromise virus infectivity. This review has a dual purpose: first, to gather all the available literature on the survival of infectious enveloped viruses, specifically at different pH and temperature conditions, and in contact with detergents; second, to select suitable concentration methods for evaluating the infectivity of these viruses in wastewater and sludge. The methodology used in this data collection review followed the systematic approach outlined in the PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines. Concentration methods cited in the data gathered are more tailored towards detecting the enveloped viruses' genome. There is a lack of suitable methods for detecting infectious enveloped viruses in wastewater and sludge. Ultrafiltration, ultracentrifugation, and polyethylene glycol precipitation methods, under specific/defined conditions, appear to be relevant approaches. Further studies are necessary to validate reliable concentration methods for detecting infectious enveloped viruses. The choice of culture system is also crucial for detection sensitivity. The data also show that the survival of infectious enveloped viruses, though lower than that of non-enveloped ones, may enable environmental transmission. Experimental data on a wide range of enveloped viruses is required due to the variability in virus persistence in the environment.

Effects of chemically-reductive trace gas contaminants on non-thermal plasma inactivation of an airborne virus

Transmission of airborne infectious diseases poses great risk for public health and socio-economic stability, thus, there is a need for an effective control method targeting the spread and transmission of pathogenic aerosols. The existence of chemically-reductive trace air contaminants in animal agriculture may affect the oxidation inactivation process of pathogens. In this study, we report how the presence of such gasses impacts the effectiveness of using non-thermal plasma (NTP) within a packed-bed dielectric barrier discharge reactor to inactivate MS2 bacteriophage. Inactivation of the aerosolized bacteriophage is determined by the combination of viability and polymerase chain reaction assays. Using a plasma power source with a voltage of 20 kV and frequency of 350 Hz, after differentiating and excluding the physical removal effects of viral aerosols potentially caused by plasma, the baseline inactivation of MS2 aerosol in air has been determined based on an overall air flow rate of 200 Liters per minute and plasma discharge power of 1.8 W. When either ammonia or hydrogen sulfide gas is introduced into the airstream at a concentration of 1 part per million, the NTP virus inactivation efficiency is reduced to around 0.5-log from the 1-log baseline inactivation in air alone. Higher concentrations of those gasses will not further inhibit the effectiveness of plasma inactivation.

Review of factors affecting virus inactivation in aerosols and droplets

The inactivation of viruses in aerosol particles (aerosols) and droplets depends on many factors, but the precise mechanisms of inactivation are not known. The system involves complex physical and biochemical interactions. We reviewed the literature to establish current knowledge about these mechanisms and identify knowledge gaps. We identified 168 relevant papers and grouped results by the following factors: virus type and structure, aerosol or droplet size, temperature, relative humidity (RH) and evaporation, chemical composition of the aerosol or droplet, pH and atmospheric composition. These factors influence the dynamic microenvironment surrounding a virion and thus may affect its inactivation. Results indicate that viruses experience biphasic decay as the carrier aerosols or droplets undergo evaporation and equilibrate with the surrounding air, and their final physical state (liquid, semi-solid or solid) depends on RH. Virus stability, RH and temperature are interrelated, but the effects of RH are multifaceted and still not completely understood. Studies on the impact of pH and atmospheric composition on virus stability have raised new questions that require further exploration. The frequent practice of studying virus inactivation in large droplets and culture media may limit our understanding of inactivation mechanisms that are relevant for transmission, so we encourage the use of particles of physiologically relevant size and composition in future research.

Cold atmospheric plasma can effectively disinfect SARS-CoV-2 in the wastewater

COVID-19 is currently pandemic and the detection of SARS-CoV-2 variants in wastewater is causing widespread concern. Herein, cold atmospheric plasma (CAP) is proposed as a novel wastewater disinfection technology that effectively inactivates SARS-CoV-2 transcription- and replication-competent virus-like particles, coronavirus GX_P2V, pseudotyped SARS-CoV-2 variants, and porcine epidemic diarrhoea virus in a large volume of water within 180 s (inhibition rate > 99%). Further, CAP disinfection did not adversely affect the viability of various human cell lines. It is identified that CAP produced peroxynitrite (ONOO-), ozone (O3), superoxide anion radicals (O2 -), and hydrogen peroxide (H2O2) as the major active substances for coronavirus disinfection. Investigation of the mechanism showed that active substances not only reacted with the coronavirus spike protein and affected its infectivity, but also destroyed the nucleocapsid protein and genome, thus affecting virus replication. This method provides an efficient and environmentally friendly strategy for the elimination of SARS-CoV-2 and other coronaviruses from wastewater.

Contribution of Particulates to Airborne Disease Transmission and Severity: A Review

The emergence of coronavirus disease 2019 (COVID-19) has catalyzed great interest in the spread of airborne pathogens. Airborne infectious diseases are classified into viral, bacterial, and fungal infections. Environmental factors can elevate their transmission and lethality. Air pollution has been reported as the leading environmental cause of disease and premature death worldwide. Notably, ambient particulates of various components and sizes are harmful pollutants. There are two prominent health effects of particles in the atmosphere: (1) particulate matter (PM) penetrates the respiratory tract and adversely affects health, such as heart and respiratory diseases; and (2) bioaerosols of particles act as a medium for the spread of pathogens in the air. Particulates contribute to the occurrence of infectious diseases by increasing vulnerability to infection through inhalation and spreading disease through interactions with airborne pathogens. Here, we focus on the synergistic effects of airborne particulates on infectious disease. We outline the concepts and characteristics of bioaerosols, from their generation to transformation and circulation on Earth. Considering that microorganisms coexist with other particulates as bioaerosols, we investigate studies examining respiratory infections associated with airborne PM. Furthermore, we discuss four factors (meteorological, biological, physical, and chemical) that may impact the influence of PM on the survival of contagious pathogens in the atmosphere. Our review highlights the significant role of particulates in supporting the transmission of infectious aerosols and emphasizes the need for further research in this area.

Dependence on relative humidity in the formation of reactive oxygen species in water droplets

Water microdroplets (7 to 11 µm average diameter, depending on flow rate) are sprayed in a closed chamber at ambient temperature, whose relative humidity (RH) is controlled. The resulting concentration of ROS (reactive oxygen species) formed in the microdroplets, measured by the amount of hydrogen peroxide (H2O2), is determined by nuclear magnetic resonance (NMR) and by spectrofluorimetric assays after the droplets are collected. The results are found to agree closely with one another. In addition, hydrated hydroxyl radical cations (•OH-H3O+) are recorded from the droplets using mass spectrometry and superoxide radical anions (•O2-) and hydroxyl radicals (•OH) by electron paramagnetic resonance spectroscopy. As the RH varies from 15 to 95%, the concentration of H2O2 shows a marked rise by a factor of about 3.5 in going from 15 to 50%, then levels off. By replacing the H2O of the sprayed water with deuterium oxide (D2O) but keeping the gas surrounding droplets with H2O, mass spectrometric analysis of the hydrated hydroxyl radical cations demonstrates that the water in the air plays a dominant role in producing H2O2 and other ROS, which accounts for the variation with RH. As RH increases, the droplet evaporation rate decreases. These two facts help us understand why viruses in droplets both survive better at low RH values, as found in indoor air in the wintertime, and are disinfected more effectively at higher RH values, as found in indoor air in the summertime, thus explaining the recognized seasonality of airborne viral infections.

Toward Standardized Aerovirology: A Critical Review of Existing Results and Methodologies

Understanding the airborne survival of viruses is important for public health and epidemiological modeling and potentially to develop mitigation strategies to minimize the transmission of airborne pathogens. Laboratory experiments typically involve investigating the effects of environmental parameters on the viability or infectivity of a target airborne virus. However, conflicting results among studies are common. Herein, the results of 34 aerovirology studies were compared to identify links between environmental and compositional effects on the viability of airborne viruses. While the specific experimental apparatus was not a factor in variability between reported results, it was determined that the experimental procedure was a major factor that contributed to discrepancies in results. The most significant contributor to variability between studies was poorly defined initial viable virus concentration in the aerosol phase, causing many studies to not measure the rapid inactivation, which occurs quickly after particle generation, leading to conflicting results. Consistently, studies that measured their reference airborne viability minutes after aerosolization reported higher viability at subsequent times, which indicates that there is an initial loss of viability which is not captured in these studies. The composition of the particles which carry the viruses was also found to be important in the viability of airborne viruses; however, the mechanisms for this effect are unknown. Temperature was found to be important for aerosol-phase viability, but there is a lack of experiments that directly compare the effects of temperature in the aerosol phase and the bulk phase. There is a need for repeated measurements between different research groups under identical conditions both to assess the degree of variability between studies and also to attempt to better understand already published data. Lack of experimental standardization has hindered the ability to quantify the differences between studies, for which we provide recommendations for future studies. These recommendations are as follows: measuring the reference airborne viability using the "direct method"; use equipment which maximizes time resolution; quantify all losses appropriately; perform, at least, a 5- and 10-min sample, if possible; report clearly the composition of the virus suspension; measure the composition of the gas throughout the experiment. Implementing these recommendations will address the most significant oversights in the existing literature and produce data which can more easily be quantitatively compared.

Dynamics and Viability of Airborne Respiratory Syncytial Virus under Various Indoor Air Conditions

The factors governing the viability of airborne viruses embedded within respiratory particles are not well understood. This study aimed to investigate the relative humidity (RH)-dependent viability of airborne respiratory syncytial virus (RSV) in simulated respiratory particles suspended in various indoor air conditions. We tested airborne RSV viability in three static indoor air conditions, including sub-hysteresis (RH < 39%), hysteresis (39% < RH < 65%), and super-hysteresis (RH > 65%) air as well as in three dynamic indoor air conditions, including the transitions between the static conditions. The dynamic conditions were hysteresis → super-hysteresis → hysteresis, sub-hysteresis → hysteresis, and super-hysteresis → hysteresis. We found that after 45 min of particle aging in static conditions, the viability of RSV in sub-hysteresis, hysteresis, and super-hysteresis air was 0.72% ± 0.06%, 0.03% ± 0.006%, and 0.27% ± 0.008%, respectively. After 45 min of aging in dynamic conditions, the RSV viability decreased for particles that remained in a liquid (deliquesced) state during aging when compared with particles in a solid (effloresced) state. The decreased viability of airborne RSV for deliquesced particles is consistent with prolonged exposure to elevated aqueous solutes. These results represent the first measurements of the survival of airborne RSV over particle aging time, with equal viability in low, intermediate, and high RHs at 5 and 15 min and a V-shaped curve after 45 min.

On-site airborne pathogen detection for infection risk mitigation

Human-infecting pathogens that transmit through the air pose a significant threat to public health. As a prominent instance, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the COVID-19 pandemic has affected the world in an unprecedented manner over the past few years. Despite the dissipating pandemic gloom, the lessons we have learned in dealing with pathogen-laden aerosols should be thoroughly reviewed because the airborne transmission risk may have been grossly underestimated. From a bioanalytical chemistry perspective, on-site airborne pathogen detection can be an effective non-pharmaceutic intervention (NPI) strategy, with on-site airborne pathogen detection and early-stage infection risk evaluation reducing the spread of disease and enabling life-saving decisions to be made. In light of this, we summarize the recent advances in highly efficient pathogen-laden aerosol sampling approaches, bioanalytical sensing technologies, and the prospects for airborne pathogen exposure measurement and evidence-based transmission interventions. We also discuss open challenges facing general bioaerosols detection, such as handling complex aerosol samples, improving sensitivity for airborne pathogen quantification, and establishing a risk assessment system with high spatiotemporal resolution for mitigating airborne transmission risks. This review provides a multidisciplinary outlook for future opportunities to improve the on-site airborne pathogen detection techniques, thereby enhancing the preparedness for more on-site bioaerosols measurement scenarios, such as monitoring high-risk pathogens on airplanes, weaponized pathogen aerosols, influenza variants at the workplace, and pollutant correlated with sick building syndromes.

Persistence of SARS-CoV-2 and its surrogate, bacteriophage Phi6, on surfaces and in water

IMPORTANCE

The COVID-19 pandemic spurred research on the persistence of SARS-CoV-2 and its surrogates. Here we highlight the importance of evaluating viral surrogates and experimental methodologies when studying pathogen survival in the environment.

Inactivation mechanisms of influenza A virus under pH conditions encountered in aerosol particles as revealed by whole-virus HDX-MS

Multiple respiratory viruses, including influenza A virus (IAV), can be transmitted via expiratory aerosol particles, and aerosol pH was recently identified as a major factor influencing airborne virus infectivity. Indoors, small exhaled aerosols undergo rapid acidification to pH ~4. IAV is known to be sensitive to mildly acidic conditions encountered within host endosomes; however, it is unknown whether the same mechanisms could mediate viral inactivation within the more acidic aerosol micro-environment. Here, we identified that transient exposure to pH 4 caused IAV inactivation by a two-stage process, with an initial sharp decline in infectious titers mainly attributed to premature attainment of the post-fusion conformation of viral protein haemagglutinin (HA). Protein changes were observed by hydrogen-deuterium exchange coupled to mass spectrometry (HDX-MS) as early as 10 s post-exposure to acidic conditions. Our HDX-MS data are in agreement with other more labor-intensive structural analysis techniques, such as X-ray crystallography, highlighting the ease and usefulness of whole-virus HDX-MS for multiplexed protein analyses, even within enveloped viruses such as IAV. Additionally, virion integrity was partially but irreversibly affected by acidic conditions, with a progressive unfolding of the internal matrix protein 1 (M1) that aligned with a more gradual decline in viral infectivity with time. In contrast, no acid-mediated changes to the genome or lipid envelope were detected. Improved understanding of respiratory virus fate within exhaled aerosols constitutes a global public health priority, and information gained here could aid the development of novel strategies to control the airborne persistence of seasonal and/or pandemic influenza in the future. IMPORTANCE It is well established that COVID-19, influenza, and many other respiratory diseases can be transmitted by the inhalation of aerosolized viruses. Many studies have shown that the survival time of these airborne viruses is limited, but it remains an open question as to what drives their infectivity loss. Here, we address this question for influenza A virus by investigating structural protein changes incurred by the virus under conditions relevant to respiratory aerosol particles. From prior work, we know that expelled aerosols can become highly acidic due to equilibration with indoor room air, and our results indicate that two viral proteins are affected by these acidic conditions at multiple sites, leading to virus inactivation. Our findings suggest that the development of air treatments to quicken the speed of aerosol acidification would be a major strategy to control infectious bioburdens in the air.

The possibility of spreading herpes simplex virus type 1 via food handling and sharing

AIMS

Herpes simplex virus type 1 (HSV-1) is an enveloped virus that causes recurrent and incurable diseases in 67% of the world population. Although it is not listed as a foodborne virus, some studies have shown that it can be recovered from surfaces as well as food.

METHODS AND RESULTS

We investigated its persistence at -20°C, 4°C, 20°C, or 37°C for up to 7 days on stainless steel, aluminum, glass, polypropylene, cheddar cheese, sliced almond, and apple skin and in cola soft drink, orange juice, coffee, and milk, as well as its transferability from stainless steel to dry or moistened nitrile or latex gloves over time at typical ambient temperatures. Based on the plaque assay on Vero cells, HSV-1 persisted at least 24 h on all surfaces and at least 1 h on food matrices but was inactivated quickly in cola soft drink. Temperature and pH affected HSV-1 infectivity. Transfer of HSV-1 at a contact pressure of 1 kg cm2-1 for 10 s occurred only on latex, especially moistened.

CONCLUSIONS

Our data on the persistence of HSV-1 on food-related surfaces suggest that some risk may be associated with sharing foods with infected carriers.

Stability of Monkeypox Virus in Body Fluids and Wastewater

An outbreak of human mpox infection in nonendemic countries appears to have been driven largely by transmission through body fluids or skin-to-skin contact during sexual activity. We evaluated the stability of monkeypox virus (MPXV) in different environments and specific body fluids and tested the effectiveness of decontamination methodologies. MPXV decayed faster at higher temperatures, and rates varied considerably depending on the medium in which virus was suspended, both in solution and on surfaces. More proteinaceous fluids supported greater persistence. Chlorination was an effective decontamination technique, but only at higher concentrations. Wastewater was more difficult to decontaminate than plain deionized water; testing for infectious MPXV could be a helpful addition to PCR-based wastewater surveillance when high levels of viral DNA are detected. Our findings suggest that, because virus stability is sufficient to support environmental MPXV transmission in healthcare settings, exposure and dose-response will be limiting factors for those transmission routes.

The role of mucosal barriers in disease progression and transmission

Mucus is a biological hydrogel that coats and protects all non-keratinized wet epithelial surfaces. Mucins, the primary structural components of mucus, are critical components of the gel layer that protect against invading pathogens. For communicable diseases, pathogen-mucin interactions contribute to the pathogen's fate and the potential for disease progression in-host, as well as the potential for onward transmission. We begin by reviewing in-host mucus filtering mechanisms, including size filtering and interaction filtering, which regulate the permeability of mucus barriers to all molecules including pathogens. Next, we discuss the role of mucins in communicable diseases at the point of transmission (i.e. how the encapsulation of pathogens in emitted mucosal droplets externally to hosts may modulate pathogen infectivity and viability). Overall, mucosal barriers modulate both host susceptibility as well as the dynamics of population-level disease transmission. The study of mucins and their use in models and experimental systems are therefore crucial for understanding the mechanistic biophysical principles underlying disease transmission and the early stages of host infection.

Detection of influenza virus and Streptococcus pneumoniae in air sampled from co-infected ferrets and analysis of their influence on pathogen stability

Secondary infection with Streptococcus pneumoniae has contributed significantly to morbidity and mortality during multiple influenza virus pandemics and remains a common threat today. During a concurrent infection, both pathogens can influence the transmission of each other, but the mechanisms behind this are unclear. In this study, condensation air sampling and cyclone bioaerosol sampling were performed using ferrets first infected with the 2009 H1N1 pandemic influenza virus (H1N1pdm09) and secondarily infected with S. pneumoniae strain D39 (Spn). We detected viable pathogens and microbial nucleic acid in expelled aerosols from co-infected ferrets, suggesting that these microbes could be present in the same respiratory expulsions. To assess whether microbial communities impact pathogen stability within an expelled droplet, we performed experiments measuring viral and bacterial persistence in 1 µL droplets. We observed that H1N1pdm09 stability was unchanged in the presence of Spn. Further, Spn stability was moderately increased in the presence of H1N1pdm09, although the degree of stabilization differed between airway surface liquid collected from individual patient cultures. These findings are the first to collect both pathogens from the air and in doing so, they provide insight into the interplay between these pathogens and their hosts.IMPORTANCEThe impact of microbial communities on transmission fitness and environmental persistence is under-studied. Environmental stability of microbes is crucial to identifying transmission risks and mitigation strategies, such as removal of contaminated aerosols and decontamination of surfaces. Co-infection with S. pneumoniae is very common during influenza virus infection, but little work has been done to understand whether S. pneumoniae alters stability of influenza virus, or vice versa, in a relevant system. Here, we demonstrate that influenza virus and S. pneumoniae are expelled by co-infected hosts. Our stability assays did not reveal any impact of S. pneumoniae on influenza virus stability, but did show a trend towards increased stability of S. pneumoniae in the presence of influenza viruses. Future work characterizing environmental persistence of viruses and bacteria should include microbially complex solutions to better mimic physiologically relevant conditions.

Stability of Aerosolized SARS-CoV-2 on Masks and Transfer to Skin

The potential for masks to act as fomites in the transmission of SARS-CoV-2 has been suggested but not demonstrated experimentally or observationally. In this study, we aerosolized a suspension of SARS-CoV-2 in saliva and used a vacuum pump to pull the aerosol through six different types of masks. After 1 h at 28 °C and 80% RH, SARS-CoV-2 infectivity was not detectable on an N95 and surgical mask, was reduced by 0.7 log10 on a nylon/spandex mask, and was unchanged on a polyester mask and two different cotton masks when recovered by elution in a buffer. SARS-CoV-2 RNA remained stable for 1 h on all masks. We pressed artificial skin against the contaminated masks and detected the transfer of viral RNA but no infectious virus to the skin. The potential for masks contaminated with SARS-CoV-2 in aerosols to act as fomites appears to be less than indicated by studies involving SARS-CoV-2 in very large droplets.

Physicochemical characterization of porcine respiratory aerosol and considerations for future aerovirology

Understanding the mechanisms which inactivate airborne viruses is a current challenge. The composition of human respiratory aerosol is poorly understood and needs to be adequately investigated for use in aerovirology studies. Here, the physicochemical properties of porcine respiratory fluid (PRF) from the trachea and lungs were investigated both in bulk solutions and in aerosols. The mass ratio of Na:K in PRF compared with cell culture media (Dulbecco's Modified Eagle Medium, DMEM), which is frequently used in aerovirology studies, was significantly lower (∼2:1 vs ∼16:1). PRF contained significantly more potassium and protein than DMEM. PRF aerosols of all samples were similarly hygroscopic to human respiratory aerosol. PRF particles could nucleate with spatially separated crystals, indicating that the protein matrix was sufficiently viscous to prevent the complete coalescence of aqueous salts prior to efflorescence. The effects of these differences in compositions on the viability of viruses are currently not well understood. The virus suspensions in aerovirology studies need to be reconsidered to adequately reflect a real-world expiration scenario.

Viral Preservation with Protein-Supplemented Nebulizing Media in Aerosols

The outbreak of SARS-CoV-2 has emphasized the need for a deeper understanding of infectivity, spread, and treatment of airborne viruses. Bacteriophages (phages) serve as ideal surrogates for respiratory pathogenic viruses thanks to their high tractability and the structural similarities tailless phages bear to viral pathogens. However, the aerosolization of enveloped SARS-CoV-2 surrogate phi6 usually results in a >3-log₁₀ reduction in viability, limiting its usefulness as a surrogate for aerosolized coronavirus in "real world" contexts, such as a sneeze or cough. Recent work has shown that saliva or artificial saliva greatly improves the stability of viruses in aerosols and microdroplets relative to standard dilution/storage buffers like suspension medium (SM) buffer. These findings led us to investigate whether we could formulate media that preserves the viability of phi6 and other phages in artificially derived aerosols. Results indicate that SM buffer supplemented with bovine serum albumin (BSA) significantly improves the recovery of airborne phi6, MS2, and 80α and outperforms commercially formulated artificial saliva. Particle sizing and acoustic particle trapping data indicate that BSA supplementation dose-dependently improves viral survivability by reducing the extent of particle evaporation. These data suggest that our viral preservation medium may facilitate a lower-cost alternative to artificial saliva for future applied aerobiology studies. IMPORTANCE We have identified common and inexpensive lab reagents that confer increased aerosol survivability on phi6 and other phages. Our results suggest that soluble protein is a key protective component in nebulizing medium. Protein supplementation likely reduces exposure of the phage to the air-water interface by reducing the extent of particle evaporation. These findings will be useful for applications in which researchers wish to improve the survivability of these (and likely other) aerosolized viruses to better approximate highly transmissible airborne viruses like SARS-CoV-2.

How to Tackle Bacteriophages: The Review of Approaches with Mechanistic Insight

Bacteriophage-based applications have a renaissance today, increasingly marking their use in industry, medicine, food processing, biotechnology, and more. However, phages are considered resistant to various harsh environmental conditions; besides, they are characterized by high intra-group variability. Phage-related contaminations may therefore pose new challenges in the future due to the wider use of phages in industry and health care. Therefore, in this review, we summarize the current knowledge of bacteriophage disinfection methods, as well as highlight new technologies and approaches. We discuss the need for systematic solutions to improve bacteriophage control, taking into account their structural and environmental diversity.

Carbohydrate vitrification in aerosolized saliva is associated with the humidity-dependent infectious potential of airborne coronavirus

An accepted murine analogue for the environmental behavior of human SARS coronaviruses was aerosolized in microdroplets of its culture media and saliva to observe the decay of its airborne infectious potential under relative humidity (RH) conditions relevant to conditioned indoor air. Contained in a dark, 10 m3 chamber maintained at 22°C, murine hepatitis virus (MHV) was entrained in artificial saliva particles that were aerosolized in size distributions that mimic SARS-CoV-2 virus expelled from infected humans' respiration. As judged by quantitative PCR, more than 95% of the airborne MHV aerosolized was recovered from microdroplets with mean aerodynamic diameters between 0.56 and 5.6 μm. As judged by its half-life, calculated from the median tissue culture infectious dose (TCID50), saliva was protective of airborne murine coronavirus through a RH range recommended for conditioned indoor air (60% < RH < 40%; average half-life = 60 minutes). However, its average half-life doubled to 120 minutes when RH was maintained at 25%. Saliva microaerosol was dominated by carbohydrates, which presented hallmarks of vitrification without efflorescence at low RH. These results suggest that dehydrating carbohydrates can affect the infectious potential coronaviruses exhibit while airborne, significantly extending their persistence under the drier humidity conditions encountered indoors.

Expiratory Aerosol pH: The Overlooked Driver of Airborne Virus Inactivation

Respiratory viruses, including influenza virus and SARS-CoV-2, are transmitted by the airborne route. Air filtration and ventilation mechanically reduce the concentration of airborne viruses and are necessary tools for disease mitigation. However, they ignore the potential impact of the chemical environment surrounding aerosolized viruses, which determines the aerosol pH. Atmospheric aerosol gravitates toward acidic pH, and enveloped viruses are prone to inactivation at strong acidity levels. Yet, the acidity of expiratory aerosol particles and its effect on airborne virus persistence have not been examined. Here, we combine pH-dependent inactivation rates of influenza A virus (IAV) and SARS-CoV-2 with microphysical properties of respiratory fluids using a biophysical aerosol model. We find that particles exhaled into indoor air (with relative humidity ≥ 50%) become mildly acidic (pH ∼ 4), rapidly inactivating IAV within minutes, whereas SARS-CoV-2 requires days. If indoor air is enriched with nonhazardous levels of nitric acid, aerosol pH drops by up to 2 units, decreasing 99%-inactivation times for both viruses in small aerosol particles to below 30 s. Conversely, unintentional removal of volatile acids from indoor air may elevate pH and prolong airborne virus persistence. The overlooked role of aerosol acidity has profound implications for virus transmission and mitigation strategies.

Unanswered questions on the airborne transmission of COVID-19

Policies and measures to control pandemics are often failing. While biological factors controlling transmission are usually well explored, little is known about the environmental drivers of transmission and infection. For instance, respiratory droplets and aerosol particles are crucial vectors for the airborne transmission of the severe acute respiratory syndrome coronavirus 2, the causation agent of the coronavirus 2019 pandemic (COVID-19). Once expectorated, respiratory droplets interact with atmospheric particulates that influence the viability and transmission of the novel coronavirus, yet there is little knowledge on this process or its consequences on virus transmission and infection. Here we review the effects of atmospheric particulate properties, vortex zones, and air pollution on virus survivability and transmission. We found that particle size, chemical constituents, electrostatic charges, and the moisture content of airborne particles can have notable effects on virus transmission, with higher survival generally associated with larger particles, yet some viruses are better preserved on small particles. Some chemical constituents and surface-adsorbed chemical species may damage peptide bonds in viral proteins and impair virus stability. Electrostatic charges and water content of atmospheric particulates may affect the adherence of virion particles and possibly their viability. In addition, vortex zones and human thermal plumes are major environmental factors altering the aerodynamics of buoyant particles in air, which can strongly influence the transport of airborne particles and the transmission of associated viruses. Insights into these factors may provide explanations for the widely observed positive correlations between COVID-19 infection and mortality with air pollution, of which particulate matter is a common constituent that may have a central role in the airborne transmission of the novel coronavirus.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10311-022-01557-z.

Development of a high-speed bioaerosol elimination system for treatment of indoor air

We developed a high-speed filterless airflow multistage photocatalytic elbow aerosol removal system for the treatment of bioaerosols such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Human-generated bioaerosols that diffuse into indoor spaces are 1-10 μm in size, and their selective and rapid treatment can reduce the risk of SARS-CoV-2 infection. A high-speed airflow is necessary to treat large volumes of indoor air over a short period. The proposed system can be used to eliminate viruses in aerosols by forcibly depositing aerosols in a high-speed airflow onto a photocatalyst placed inside the system through inertial force and turbulent diffusion. Because the main component of the deposited bioaerosol is water, it evaporates after colliding with the photocatalyst, and the nonvolatile virus remains on the photocatalytic channel wall. The residual virus on the photocatalytic channel wall is mineralized via photocatalytic oxidation with UVA-LED irradiation in the channel. When this system was operated in a 4.5 m³ aerosol chamber, over 99.8% aerosols in the size range of 1-10 μm were removed within 15 min. The system continued delivering such performance with the continuous introduction of aerosols. Because this system exhibits excellent aerosol removal ability at a flow velocity of 5 m/s or higher, it is more suitable than other reactive air purification systems for treating large-volume spaces.

Minding the matrix: The importance of inoculum suspensions on finger transfer efficiency of virus

AIMS

The aim of this study was to determine how the transfer efficiency of MS-2 coliphage from the toilet seat to hands and fingertip to lip differs according to the suspension of the inoculum.

METHODS AND RESULTS

Hands were sampled after lifting a toilet seat which was inoculated with MS-2 on the underneath side. MS-2 was suspended in a spectrum of proteinaceous and non-proteinaceous solutions. Transfer efficiencies were greatest with the ASTM tripartite soil load (3.02% ± 4.03) and lowest with phosphate-buffered saline (PBS) (1.10% ± 0.81) for hand-to-toilet seat contacts. Finger-to-lip transfer rates were significantly different (p < 0.05) depending on suspension matrix, with PBS yielding the highest transfer (52.53% ± 4.48%) and tryptose soy broth (TSB) the lowest (23.15% ± 24.27%). Quantitative microbial risk assessment was used to estimate the probability of infection from adenovirus and norovirus from finger contact with a toilet seat.

CONCLUSIONS

The greatest transfer as well as the largest variation of transfer were measured for finger-to-lip contacts as opposed to toilet seat-to-finger contacts. These factors influence the estimation of the probability of infection from micro-activity, that is, toilet seat adjustment.

SIGNIFICANCE AND IMPACT

Viruses may be transferred from various human excreta with differing transfer efficiencies, depending on the protein content.

Clinically relevant pathogens on surfaces display differences in survival and transcriptomic response in relation to probiotic and traditional cleaning strategies

Indoor surfaces are paradoxically presumed to be both colonized by pathogens, necessitating disinfection, and "microbial wastelands." In these resource-poor, dry environments, competition and decay are thought to be important drivers of microbial community composition. However, the relative contributions of these two processes have not been specifically evaluated. To bridge this knowledge gap, we used microcosms to evaluate whether interspecies interactions occur on surfaces. We combined transcriptomics and traditional microbiology techniques to investigate whether competition occurred between two clinically important pathogens, Acinetobacter baumannii and Klebsiella pneumoniae, and a probiotic cleaner containing a consortium of Bacillus species. Probiotic cleaning seeks to take advantage of ecological principles such as competitive exclusion, thus using benign microorganisms to inhibit viable pathogens, but there is limited evidence that competitive exclusion in fact occurs in environments of interest (i.e., indoor surfaces). Our results indicate that competition in this setting has a negligible impact on community composition but may influence the functions expressed by active organisms. Although Bacillus spp. remained viable on surfaces for an extended period of time after application, viable colony forming units (CFUs) of A. baumannii recovered following exposure to a chemical-based detergent with and without Bacillus spp. showed no statistical difference. Similarly, for K. pneumoniae, there were small statistical differences in CFUs between cleaning scenarios with or without Bacillus spp. in the chemical-based detergent. The transcriptome of A. baumannii with and without Bacillus spp. exposure shared a high degree of similarity in overall gene expression, but the transcriptome of K. pneumoniae differed in overall gene expression, including reduced response in genes related to antimicrobial resistance. Together, these results highlight the need to fully understand the underlying biological and ecological mechanisms for community assembly and function on indoor surfaces, as well as having practical implications for cleaning and disinfection strategies for infection prevention.

Inactivation of viruses on surfaces by infrared techniques

Several studies on vaccines and medicines against virus-based illnesses (COVID-19, SARS, MERS) are being conducted worldwide. However, virus mutation is an issue. Therefore, inactivation and disinfection of viruses are crucial. This paper presents a method for virus inactivation by physical techniques. The infrared (IR) technique is preferred over other disinfection techniques such as ultraviolet (UV) and chemical disinfectants (alcohol) due to the associated health and environmental benefits. In this study, IR sources with various wavelengths were characterized and a far infrared (FIR) source was used to inactivate viruses. FIR sources have a therapeutic effect on the human body and have been used in medical centers. Virus spread is highly affected by environmental conditions such as temperature, humidity, and airflow. A setup with IR sources, an IR camera, an automatically controlled humidity chamber, and an airflow unit was constructed to study the viability of viruses in stationary droplets as a function of relative humidity and temperature. Bacteriophage Phi6 was used as a model organism for studying enveloped viruses such as influenza and coronavirus. IR techniques were used for studying virus inactivation. The effect of various physical conditions such as temperature, humidity, and airflows was considered to study the effect of radiation on the stationary droplets of Phi6. All measurements were performed under laboratory conditions with controlled temperature and humidity. The IR camera system was used to measure the surface temperature of Phi6 suspension droplets. The samples subjected to IR radiation were processed for plaque assay preparation and counting. Measurements were carried out to reduce and eliminate droplets, which are one of the transmission pathways of viruses. IR was radiated in closed and open-air conditions with appropriate humidity and temperature. This study reports the effective inactivation of viruses by FIR. The inactivation rate under 50 %rh for IR radiated at 1.4 m height for 3 h in closed environmental chamber was 90%, and that under an airflow rate of 0.20 m/s for 10 min in open-air conditions at a height of 1.0 m was 45.7%.

Persistence of avian influenza virus (H9N2) on plastic surface

Plastics have been found to be colonized with pathogens and may become vectors for transmission of diseases. In this study, we evaluated the persistence of H9N2 avian influenza virus (AIV) on the surfaces of various plastics (PP, PE, PS, PET, PVC, PMMA) under different environmental conditions using glass and stainless steel for comparison. Our results showed that the RNA abundance of AIV on plastics was decreased over time but still detectable 14 days after AIV had been dropped on plastic surfaces. Low temperature (4 °C) was more favorable for AIV RNA preservation and infectivity maintenance. The abundance of AIV RNA was significantly greater on polyethylene terephthalate (PET) than that on glass and stainless steel at higher temperature (i.e., 25 °C and 37 °C) and lower humidity (<20% and 40-60%) (p < 0.05). Infectivity assay showed that AIV infectivity was only maintained at 4 °C after 24 h of incubation. Taken together, the persistence of AIV was more affected by environmental factors than material types. Plastics were able to preserve viral RNA more effectively in relatively high-temperature or low-humidity environments. Our study indicates that environmental factors should be taken into consideration when we evaluate the capacity of plastics to spread viruses.

Assessing suspension and infectivity times of virus-loaded aerosols involved in airborne transmission

Airborne transmission occurs through droplet-mediated transport of viruses following the expulsion of an aerosol by an infected host. Transmission efficiency results from the interplay between virus survival in the drying droplet and droplet suspension time in the air, controlled by the coupling between water evaporation and droplet sedimentation. Furthermore, droplets are made of a respiratory fluid and thus, display a complex composition consisting of water and nonvolatile solutes. Here, we quantify the impact of this complex composition on the different phenomena underlying transmission. Solutes lead to a nonideal thermodynamic behavior, which sets an equilibrium droplet size that is independent of relative humidity. In contrast, solutes do not significantly hinder transport due to their low initial concentration. Realistic suspension times are computed and increase with increasing relative humidity or decreasing temperature. By uncoupling drying and suspended stages, we observe that enveloped viruses may remain infectious for hours in dried droplets. However, their infectivity decreases with increasing relative humidity or temperature after dozens of minutes. Examining expelled droplet size distributions in the light of these results leads to distinguishing two aerosols. Most droplets measure between 0 and 40 µm and compose an aerosol that remains suspended for hours. Its transmission efficiency is controlled by infectivity, which decreases with increasing humidity and temperature. Larger droplets form an aerosol that only remains suspended for minutes but corresponds to a much larger volume and thus, viral load. Its transmission efficiency is controlled by droplet suspension time, which decreases with increasing humidity and decreasing temperature.

Nanomechanics and Morphology of Simulated Respiratory Particles

The impact of respiratory particle composition on the equilibrium morphology and phase is not well understood. Furthermore, the effects of these different phases and morphologies on the viability of viruses embedded within these particles are equally unknown. Physiologically relevant respiratory fluid analogues were constructed, and their hygroscopic behavior was measured using an ensemble technique. A relationship between hygroscopicity and protein concentration was determined, providing additional validation to the high protein content of respiratory aerosol measured in prior works (>90%). It was found that the salt component of the respiratory particles could crystallize as a single crystal, multiple crystals, or would not crystallize at all. It was found that dried protein particles at indoor-relevant climatic conditions could exist separately in a glassy (∼77% of particles) or viscoelastic state (∼23% of particles). The phase state and morphology of respiratory particles may influence the viability of embedded pathogens. We recommend that pathogen research aiming to mimic the native composition of respiratory fluid should use a protein concentration of at least 90% by solute volume to improve the representativity of the pathogen's microenvironment.

Chlorine efficacy against bacteriophage Phi6, a surrogate for enveloped human viruses, on porous and non-porous surfaces at varying temperatures and humidity

While efficacy of chlorine against Phi6, a widely-used surrogate for pathogenic enveloped viruses, is well-documented, surfaces common to low-resource contexts are under-researched. We evaluated seven surfaces (stainless steel, plastic, nitrile, tarp, cloth, concrete, wood) and three environmental conditions-temperature (4, 25, 40 °C), relative humidity (RH) (23, 85%), and soiling-to determine Phi6 recoverability and the efficacy of disinfection with 0.5% NaOCl. Overall, Phi6 recovery was >4 log₁₀ PFU/mL on most surfaces after drying 1 hour at all temperature/humidity conditions. After disinfection, all non-porous test conditions (48/48) achieved ≥4 LRV at 1 and 5 minutes of exposure; significantly more non-porous surfaces met ≥4 LRV than porous (p < 0.001). Comparing porous surfaces, significantly fewer wood samples met ≥4 LRV than cloth (p < 0.001); no differences were observed between concrete and either wood (p = 0.083) or cloth (p = 0.087). Lastly, no differences were observed between soil and no-soil conditions for all surfaces (p = 0.712). This study highlights infectious Phi6 is recoverable across a range of surfaces and environmental conditions, and confirms the efficacy of chlorine disinfection. We recommend treating all surfaces with suspect contamination as potentially infectious, and disinfecting with 0.5% NaOCl for the minimum contact time required for the target enveloped virus (e.g. Ebola, SARS-CoV-2).

Environmental Stability of Enveloped Viruses is Impacted by the Initial Volume and Evaporation Kinetics of Droplets.. [PMID: 35923308 PMCID: PMC9347275 DOI: 10.1101/2022.07.26.501658] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Efficient spread of respiratory viruses requires the virus to maintain infectivity in the environment. Environmental stability of viruses can be influenced by many factors, including temperature and humidity. Our study measured the impact of initial droplet volume (50, 5, and 1 µL) and relative humidity (RH: 40%, 65%, and 85%) on the stability of influenza A virus, bacteriophage, Phi6, a common surrogate for enveloped viruses, and SARS-CoV-2 under a limited set of conditions. Our data suggest that the drying time required for the droplets to reach quasi-equilibrium (i.e. a plateau in mass) varied with RH and initial droplet volume. The macroscale physical characteristics of the droplets at quasi-equilibrium varied with RH but not with initial droplet volume. We observed more rapid virus decay when the droplets were still wet and undergoing evaporation, and slower decay after the droplets had dried. Initial droplet volume had a major effect on virus viability over the first few hours; whereby the decay rate of influenza virus was faster in smaller droplets. In general, influenza virus and SARS-CoV-2 decayed similarly. Overall, this study suggests that virus decay in media is closely correlated with the extent of droplet evaporation, which is controlled by RH. Taken together, these data suggest that decay of different viruses is more similar at higher RH and in smaller droplets and is distinct at lower RH and in larger droplets. Importantly, accurate assessment of transmission risk requires use of physiologically relevant droplet volumes and careful consideration of the use of surrogates.

Funding

National Institute of Allergy and Infectious Diseases, National Institute of Neurological Disorders and Stroke, National Institutes of Health; Department of Health and Human Services; Flu Lab.

Importance

During the COVID-19 pandemic, policy decisions were being driven by virus stability experiments involving SARS-CoV-2 applied to surfaces in large droplets at various humidity conditions. The results of our study indicate that determination of half-lives for emerging pathogens in large droplets likely over-estimates transmission risk for contaminated surfaces, as occurred during the COVID-19 pandemic. Our study implicates the need for the use of physiologically relevant droplet sizes with use of relevant surrogates in addition to what is already known about the importance of physiologically relevant media for risk assessment of future emerging pathogens.

Impact of Chemical Properties of Human Respiratory Droplets and Aerosol Particles on Airborne Viruses' Viability and Indoor Transmission

The airborne transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has been identified as a potential pandemic challenge, especially in poorly ventilated indoor environments, such as certain hospitals, schools, public buildings, and transports. The impacts of meteorological parameters (temperature and humidity) and physical property (droplet size) on the airborne transmission of coronavirus in indoor settings have been previously investigated. However, the impacts of chemical properties of viral droplets and aerosol particles (i.e., chemical composition and acidity (pH)) on viability and indoor transmission of coronavirus remain largely unknown. Recent studies suggest high organic content (proteins) in viral droplets and aerosol particles supports prolonged survival of the virus by forming a glassy gel-type structure that restricts the virus inactivation process under low relative humidity (RH). In addition, the virus survival was found at neutral pH, and inactivation was observed to be best at low (<5) and high pH (>10) values (enveloped bacteriophage Phi6). Due to limited available information, this article illustrates an urgent need to research the impact of chemical properties of exhaled viral particles on virus viability. This will improve our fundamental understanding of indoor viral airborne transmission mechanisms.

Modeling the impact of indoor relative humidity on the infection risk of five respiratory airborne viruses

With a modified version of the Wells-Riley model, we simulated the size distribution and dynamics of five airborne viruses (measles, influenza, SARS-CoV-2, human rhinovirus, and adenovirus) emitted from a speaking person in a typical residential setting over a relative humidity (RH) range of 20-80% and air temperature of 20-25 °C. Besides the size transformation of virus-containing droplets due to evaporation, respiratory absorption, and then removal by gravitational settling, the modified model also considered the removal mechanism by ventilation. The trend and magnitude of RH impact depended on the respiratory virus. For rhinovirus and adenovirus humidifying the indoor air from 20/30 to 50% will be increasing the relative infection risk, however, this relative infection risk increase will be negligible for rhinovirus and weak for adenovirus. Humidification will have a potential benefit in decreasing the infection risk only for influenza when there is a large infection risk decrease for humidifying from 20 to 50%. Regardless of the dry solution composition, humidification will overall increase the infection risk via long-range airborne transmission of SARS-CoV-2. Compared to humidification at a constant ventilation rate, increasing the ventilation rate to moderate levels 0.5 → 2.0 h-1 will have a more beneficial infection risk decrease for all viruses except for influenza. Increasing the ventilation rate from low values of 0.5 h-1 to higher levels of 6 h-1 will have a dominating effect on reducing the infection risk regardless of virus type.

The dynamics of SARS-CoV-2 infectivity with changes in aerosol microenvironment

Understanding the factors that influence the airborne survival of viruses such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in aerosols is important for identifying routes of transmission and the value of various mitigation strategies for preventing transmission. We present measurements of the stability of SARS-CoV-2 in aerosol droplets (∼5 to 10 µm equilibrated radius) over timescales spanning 5 s to 20 min using an instrument to probe survival in a small population of droplets (typically 5 to 10) containing ∼1 virus/droplet. Measurements of airborne infectivity change are coupled with a detailed physicochemical analysis of the airborne droplets containing the virus. A decrease in infectivity to ∼10% of the starting value was observable for SARS-CoV-2 over 20 min, with a large proportion of the loss occurring within the first 5 min after aerosolization. The initial rate of infectivity loss was found to correlate with physical transformation of the equilibrating droplet; salts within the droplets crystallize at relative humidities (RHs) below 50%, leading to a near-instant loss of infectivity in 50 to 60% of the virus. However, at 90% RH, the droplet remains homogenous and aqueous, and the viral stability is sustained for the first 2 min, beyond which it decays to only 10% remaining infectious after 10 min. The loss of infectivity at high RH is consistent with an elevation in the pH of the droplets, caused by volatilization of CO₂ from bicarbonate buffer within the droplet. Four different variants of SARS-CoV-2 were compared and found to have a similar degree of airborne stability at both high and low RH.

An overview of solutions for airborne viral transmission reduction related to HVAC systems including liquid desiccant air-scrubbing

The spread of the coronavirus SARS-CoV-2 affects the health of people and the economy worldwide. As air transmits the virus, heating, ventilation and air-conditioning (HVAC) systems in buildings, enclosed spaces and public transport play a significant role in limiting the transmission of airborne pathogens at the expenses of increased energy consumption and possibly reduced thermal comfort. On the other hand, liquid desiccant technology could be adopted as an air scrubber to increase indoor air quality and inactivate pathogens through temperature and humidity control, making them less favourable to the growth, proliferation and infectivity of microorganisms. The objectives of this study are to review the role of HVAC in airborne viral transmission, estimate its energy penalty associated with the adoption of HVAC for transmission reduction and understand the potential of liquid desiccant technology. Factors affecting the inactivation of pathogens by liquid desiccant solutions and possible modifications to increase their heat and mass transfer and sanitising characteristics are also described, followed by an economic evaluation. It is concluded that the liquid desiccant technology could be beneficial in buildings (requiring humidity control or moisture removal in particular when viruses are likely to present) or in high-footfall enclosed spaces (during virus outbreaks).

UV inactivation of Semliki Forest virus and bacteria by alternative light sources

The quick spreading of the SARS-CoV-2 virus, initiating the global pandemic with a significant impact on economics and health, highlighted an urgent need for effective and sustainable restriction mechanisms of pathogenic microorganisms. UV-C radiation, causing inactivation of many viruses and bacteria, is one of the tools for disinfection of different surfaces, liquids, and air; however, mainly mercury 254 nm line is commonly used for it. In this paper, we report our results of the experiments with newly elaborated special type polychromatic non-mercury UV light sources, having spectral lines in the spectral region from 190 nm to 280 nm. Inactivation tests were performed with both Escherichia coli (E.coli) bacteria and Semliki Forest virus (SFV) as a representative of human enveloped RNA viruses. In addition, the effect of prepared lamps on virus samples in liquid and dry form (dried virus-containing solution) was tested. Reduction of 4 log10 of E.coli was obtained after 10 min of irradiation with both thallium-antimony and arsenic high-frequency electrodeless lamps. High reduction results for the arsenic light source demonstrated sensitivity of E. coli to wavelengths below 230 nm, including spectral lines around 200 nm. For the Semliki Forest virus, the thallium-antimony light source showed virus inactivation efficiency with a high virus reduction rate in the range of 3.10 to > 4.99 log10 within 5 min of exposure. Thus, the new thallium-antimony light source showed the most promising disinfection effect in bacteria and viruses, and arsenic light sources for bacteria inactivation, opening doors for many applications in disinfection systems, including for pathogenic human RNA viruses.

Factors Impacting Persistence of Phi6 Bacteriophage, an Enveloped Virus Surrogate, on Fomite Surfaces

The persistence of Phi6 (Φ6) bacteriophage on surfaces commonly encountered in consumer-facing environments was evaluated. Φ6 has been utilized as a surrogate for enveloped viruses, including SARS-CoV-2—the causative agent of COVID-19—due to structural similarities, biosafety level 1 (BSL-1) status, and ease of use. Φ6 persistence on fomites was evaluated by characterizing the impact of the inoculum matrix (artificial saliva, phosphate-buffered saline [PBS], tripartite), inoculum level (low and high), and surface type (nonporous—aluminum, stainless steel, plastic, touchscreen, vinyl; porous—wood). Φ6 was inoculated onto surfaces at low and high inoculum levels for each inoculum matrix and incubated (20.54 ± 0.48°C) for up to 168 h. Φ6 was eluted from the surface and quantified via the double agar overlay assay to determine virus survival over time. For nonporous surfaces inoculated with artificial saliva and PBS, significantly higher D values were observed with high inoculum application according to the 95% confidence intervals. In artificial saliva, D values ranged from 1.00 to 1.35 h at a low inoculum and 4.44 to 7.05 h at a high inoculum across inoculation matrices and surfaces. D values for Φ6, regardless of the inoculum level, were significantly higher in tripartite than in artificial saliva and PBS for nonporous surfaces. In contrast with artificial saliva or PBS, D values in tripartite at low inoculum (D values ranging from 45.8 to 72.8 h) were greater than those at high inoculum (D values ranging from 26.4 to 45.5 h) on nonporous surfaces. This study characterized the impact of the inoculum matrix, inoculum level, and surface type on Φ6 survival on various surfaces relevant to fomite transmission in public settings.

IMPORTANCE An important consideration in virus contact transmission is the transfer rate between hands and surfaces, which is driven by several factors, including virus persistence on inanimate surfaces. This research characterized Φ6 persistence on surfaces commonly encountered in public settings based on various factors. The inoculum matrix, which simulates the route of transmission, can impact virus persistence, and three separate matrices were evaluated in this study to determine the impact on Φ6 persistence over time. The number of microorganisms has also been suggested to impact persistence, which was evaluated here to simulate real-world contamination scenarios on six surface types. Results from this study will guide future research utilizing Φ6 or other surrogates for enveloped viruses of public health concern.

Porous surfaces: stability and recovery of coronaviruses

The role of indirect contact in the transmission of SARS-CoV-2 is not clear. SARS-CoV-2 persists on dry surfaces for hours to days; published studies have largely focused on hard surfaces with less research being conducted on different porous surfaces, such as textiles. Understanding the potential risks of indirect transmission of COVID-19 is useful for settings where there is close contact with textiles, including healthcare, manufacturing and retail environments. This article aims to review current research on porous surfaces in relation to their potential as fomites of coronaviruses compared to non-porous surfaces. Current methodologies for assessing the stability and recovery of coronaviruses from surfaces are also explored. Coronaviruses are often less stable on porous surfaces than non-porous surfaces, for example, SARS-CoV-2 persists for 0.5 h-5 days on paper and 3-21 days on plastic; however, stability is dependent on the type of surface. In particular, the surface properties of textiles differ widely depending on their construction, leading to variation in the stability of coronaviruses, with longer persistence on more hydrophobic materials such as polyester (1-3 days) compared to highly absorbent cotton (2 h-4 days). These findings should be considered where there is close contact with potentially contaminated textiles.

Computer Simulation of the Surface of Aqueous Ionic and Surfactant Solutions

The surface of aqueous solutions of simple salts was not the main focus of scientific attention for a long while. Considerable interest in studying such systems has only emerged in the past two decades, following the pioneering finding that large halide ions, such as I^-, exhibit considerable surface affinity. Since then, a number of issues have been clarified; however, there are still several unresolved points (e.g., the effect of various salts on lateral water diffusion at the surface) in this respect. Computer simulation studies of the field have largely benefited from the appearance of intrinsic surface analysis methods, by which the particles staying right at the boundary of the two phases can be unambiguously identified. Considering complex ions instead of simple ones opens a number of interesting questions, both from the theoretical point of view and from that of the applications. Besides reviewing the state-of-the-art of intrinsic surface analysis methods as well as the most important advances and open questions concerning the surface of simple ionic solutions, we focus on two such systems in this Perspective, namely, the surface of aqueous mixtures of room temperature ionic liquids and that of ionic surfactants. In the case of the former systems, for which computer simulation studies have still scarcely been reported, we summarize the theoretical advances that could trigger such investigations, which might well be of importance also from the point of view of industrial applications. Computer simulation methods are, on the other hand, widely used in studies of the surface of surfactant solutions. Here we review the most important theoretical advances and issues to be addressed and discuss two areas of applications, namely, the inclusion of information gathered from such simulations in large scale atmospheric models and the better understanding of the airborne transmission of viruses, such as SARS-CoV-2.

Evidence for a semisolid phase state of aerosols and droplets relevant to the airborne and surface survival of pathogens

Ambient humidity can influence the survival of pathogens in respiratory aerosols and droplets, although the mechanism and optimum humidity level for public health remain unclear. Here, we present evidence for a humidity-dependent, semisolid state of aerosols and droplets relevant to pathogen survival. These observations indicate that a semisolid state may protect pathogens from inactivation by hindering disinfection reactions at intermediate-to-low humidity levels. The formation of the semisolid state was dependent on the composition of the aerosols, which suggests that the humidity for optimum pathogen destruction will depend on the composition of respiratory particles released from an infected host. These observations can be used to help interpret laboratory studies and inform public health recommendations.

The phase state of respiratory aerosols and droplets has been linked to the humidity-dependent survival of pathogens such as SARS-CoV-2. To inform strategies to mitigate the spread of infectious disease, it is thus necessary to understand the humidity-dependent phase changes associated with the particles in which pathogens are suspended. Here, we study phase changes of levitated aerosols and droplets composed of model respiratory compounds (salt and protein) and growth media (organic–inorganic mixtures commonly used in studies of pathogen survival) with decreasing relative humidity (RH). Efflorescence was suppressed in many particle compositions and thus unlikely to fully account for the humidity-dependent survival of viruses. Rather, we identify organic-based, semisolid phase states that form under equilibrium conditions at intermediate RH (45 to 80%). A higher-protein content causes particles to exist in a semisolid state under a wider range of RH conditions. Diffusion and, thus, disinfection kinetics are expected to be inhibited in these semisolid states. These observations suggest that organic-based, semisolid states are an important consideration to account for the recovery of virus viability at low RH observed in previous studies. We propose a mechanism in which the semisolid phase shields pathogens from inactivation by hindering the diffusion of solutes. This suggests that the exogenous lifetime of pathogens will depend, in part, on the organic composition of the carrier respiratory particle and thus its origin in the respiratory tract. Furthermore, this work highlights the importance of accounting for spatial heterogeneities and time-dependent changes in the properties of aerosols and droplets undergoing evaporation in studies of pathogen viability.

Phi 6 Bacteriophage Inactivation by Metal Salts, Metal Powders, and Metal Surfaces

The interaction of phages with abiotic environmental surfaces is usually an understudied field of phage ecology. In this study, we investigated the virucidal potential of different metal salts, metal and ceramic powders doped with Ag and Cu ions, and newly fabricated ceramic and metal surfaces against Phi6 bacteriophage. The new materials were fabricated by spark plasma sintering (SPS) and/or selective laser melting (SLM) techniques and had different surface free energies and infiltration features. We show that inactivation of Phi6 in solutions with Ag and Cu ions can be as effective as inactivation by pH, temperature, or UV. Adding powder to Ag and Cu ion solutions decreased their virucidal effect. The newly fabricated ceramic and metal surfaces showed very good virucidal activity. In particular, 45%TiO2 + 5%Ag + 45%ZrO2 + 5%Cu, in addition to virus adhesion, showed virucidal and infiltration properties. The results indicate that more than 99.99% of viruses deposited on the new ceramic surface were inactivated or irreversibly attached to it.

Persistence of viable MS2 and Phi6 bacteriophages on carpet and dust

Resuspension of dust from flooring is a major source of human exposure to microbial contaminants, but the persistence of viruses on dust and carpet and the contribution to human exposure are often unknown. The goal of this work is to determine viability of MS2 and Phi6 bacteriophages on cut carpet, looped carpet, and house dust both over time and after cleaning. Bacteriophages were nebulized onto carpet or dust in artificial saliva. Viability was measured at 0, 1, 2, 3, 4, 24, and 48 h and after cleaning by vacuum, steam, hot water extraction, and disinfection. MS2 bacteriophages showed slower viability decay rates in dust (-0.11 hr^-1 ), cut carpet (-0.20 hr^-1 ), and looped carpet (-0.09 hr^-1 ) compared to Phi6 (-3.36 hr^-1 , -1.57 hr^-1 , and -0.20 hr^-1 , respectively). Viable viral concentrations were reduced to below the detection limit for steam and disinfection for both MS2 and Phi6 (p < 0.05), while vacuuming and hot water extraction showed no significant changes in concentration from uncleaned carpet (p > 0.05). These results demonstrate that MS2 and Phi6 bacteriophages can remain viable in carpet and dust for several hours to days, and cleaning with heat and disinfectants may be more effective than standard vacuuming.

Drying of virus-containing particles: modelling effects of droplet origin and composition

BACKGROUND AND PURPOSE

Virus-containing aerosol droplets emitted by breathing, speech or coughing dry rapidly to equilibrium with ambient relative humidity (RH), increasing in solute concentration with effects on virus survival and decreasing in diameter with effects on sedimentation and respiratory uptake. The aim of this paper is to model the effect of ionic and macromolecular solutes on droplet drying and solute concentration.

METHODS

Deliquescence-efflorescence concepts and Kohler theory were used to simulate the evolution of solute concentrations and water activity in respiratory droplets, starting from efflorescence data on mixed NaCl/KCl aerosols and osmotic pressure data on respiratory macromolecules.

RESULTS

In NaCl/KCl solutions total salt concentrations were shown to reach 10-13 M at the efflorescence RH of 40-55%, depending on the K:Na ratio. Dependence on K:Na ratio implies that the evaporation curves differ between aerosols derived from saliva and from airway surfaces. The direct effect of liquid droplet size through the Kelvin term was shown to be smaller and restricted to the evolution of breath emissions. Modelling the effect of proteins and glycoproteins showed that salts determine drying equilibria down to the efflorescence RH, and macromolecules at lower RH.

CONCLUSION

Differences in solute composition between airway surfaces and saliva are predicted to lead to different drying behaviour of droplets emitted by breathing, speech and coughing. These differences may influence the inactivation of viruses.

Estimating the impact of indoor relative humidity on SARS-CoV-2 airborne transmission risk using a new modification of the Wells-Riley model

A novel modified version of the Wells-Riley model was used to estimate the impact of relative humidity (RH) on the removal of respiratory droplets containing the SARS-CoV-2 virus by deposition through gravitational settling and its inactivation by biological decay; the effect of RH on susceptibility to SARS-CoV-2 was not considered. These effects were compared with the removal achieved by increased ventilation rate with outdoor air. Modeling was performed assuming that the infected person talked continuously for 60 and 120 min. The results of modeling showed that the relative impact of RH on the infection risk depended on the ventilation rate and the size range of virus-laden droplets. A ventilation rate of 0.5 ACH, the change of RH between 20% and 53% was predicted to have a small effect on the infection risk, while at a ventilation rate of 6 ACH this change had nearly no effect. On the contrary, increasing the ventilation rate from 0.5 ACH to 6 ACH was predicted to decrease the infection risk by half which is remarkably larger effect compared with that predicted for RH. It is thus concluded that increasing the ventilation rate is more beneficial for reducing the airborne levels of SARS-CoV-2 than changing indoor RH.

PRACTICAL IMPLICATIONS

The present results show that humidification to moderate levels of 40%-60% RH should not be expected to provide a significant reduction in infection risk caused by SARS-CoV-2, hence installing and running humidifiers may not be an efficient solution to reduce the risk of COVID-19 disease in indoor spaces. The results do however confirm that ventilation has a key role in controlling SARS-CoV-2 virus concentration in the air providing considerably higher benefits. The modified model developed in the present work can be used by public health experts, engineers, and epidemiologists when selecting different measures to reduce the infection risk from SARS-CoV-2 indoors allowing informed decisions concerning indoor environmental control.

Higher Concentrations of Bacterial Enveloped Virus Phi6 Can Protect the Virus from Environmental Decay

Phage Phi6 is an enveloped virus considered a possible nonpathogenic surrogate for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and other viral pathogens in transmission studies. Larger input amounts of bacteriophage Phi6 are shown to delay and protect the phage from environmental decay, both when the phages are dried in plastic tubes and when they are stored in saline solution at 4°C. In contrast, when bacteriophage Phi6 is placed in LB (Luria-Bertani) growth medium (instead of saline) prior to placement on the plastic surface, the influence of the starting concentration on viral recovery is negligible. Protection is reflected in the phage half-lives at higher concentrations being longer than the half-lives at lower concentrations. Because experiments supporting the possibility of fomite transmission of SARS-CoV-2 and other viruses rely upon the survival of infectious virus following inoculation onto various surfaces, large initial amounts of input virus on a surface may generate artificially inflated survival times compared to realistic lower levels of virus that a subject would normally encounter. This is not only because there are extra half-lives to go through at higher concentrations but also because the half-lives themselves are extended at higher virus concentrations. It is important to design surface drying experiments for pathogens with realistic levels of input virus and to consider the role of the carrier and matrix if the results are to be clinically relevant.

IMPORTANCE During the coronavirus disease 2019 (COVID-19) pandemic, much attention has been paid to the environmental decay of SARS-CoV-2 due to the proposed transmission of the virus via fomites. However, published experiments have commenced with inocula with very high virus titers, an experimental design not representative of real-life conditions. The study described here evaluated the impact of the initial virus titer on the environmental decay of an enveloped virus, using a nonpathogenic surrogate for the transmission of SARS-CoV-2, enveloped bacteriophage Phi6. We establish that higher concentrations of virus can protect the virus from environmental decay, depending on conditions. This has important implications for stability studies of SARS-CoV-2 and other viruses. Our results point to a limitation in the fundamental methodology that has been used to attribute fomite transmission for almost all respiratory viruses.

Implications of the Coffee-Ring Effect on Virus Infectivity

The factors contributing to the survival of enveloped viruses (e.g., influenza and SARS-CoV-2) on fomite surfaces are of societal interest. The bacteriophage Phi6 is an enveloped viral surrogate commonly used to study viability. To investigate how viability changes during the evaporation of droplets on polypropylene, we conducted experiments using a fixed initial Phi6 concentration while systematically varying the culture concentration and composition (by amendment with 2% fetal bovine serum (FBS), 0.08 wt % BSA, or 0.5 wt % SDS). The results were consistent with the well-founded relative humidity (RH) effect on virus viability; however, the measured viability change was greater than that previously reported for droplets containing either inorganic salts or proteins alone, and the protein effects diverged in 1× Dulbecco's modified Eagle's medium (DMEM). We attribute this discrepancy to changes in virus distribution during droplet evaporation that arise due to the variable solute drying patterns (i.e., the "coffee-ring" effect) that are a function of the droplet biochemical composition. To test this hypothesis, we used surface-enhanced Raman spectroscopy (SERS) imaging and three types of gold nanoparticles (pH nanoprobe, positively charged (AuNPs(+)), and negatively charged (AuNPs(-))) as physical surrogates for Phi6 and determined that lower DMEM concentrations, as well as lower protein concentrations, suppressed the coffee-ring effect. This result was observed irrespective of particle surface charge. The trends in the coffee-ring effect correlate well with the measured changes in virus infectivity. The correlation suggests that conditions resulting in more concentrated coffee rings provide protective effects against inactivation when viruses and proteins aggregate.

Heat-Treated Virus Inactivation Rate Depends Strongly on Treatment Procedure: Illustration with SARS-CoV-2

Decontamination helps limit environmental transmission of infectious agents. It is required for the safe reuse of contaminated medical, laboratory, and personal protective equipment, and for the safe handling of biological samples. Heat treatment is a common decontamination method, notably used for viruses. We show that for liquid specimens (here, solution of SARS-CoV-2 in cell culture medium), the virus inactivation rate under heat treatment at 70°C can vary by almost two orders of magnitude depending on the treatment procedure, from a half-life of 0.86 min (95% credible interval [CI] 0.09, 1.77) in closed vials in a heat block to 37.04 min (95% CI 12.64, 869.82) in uncovered plates in a dry oven. These findings suggest a critical role of evaporation in virus inactivation via dry heat. Placing samples in open or uncovered containers may dramatically reduce the speed and efficacy of heat treatment for virus inactivation. Given these findings, we reviewed the literature on temperature-dependent coronavirus stability and found that specimen container types, along with whether they are closed, covered, or uncovered, are rarely reported in the scientific literature. Heat-treatment procedures must be fully specified when reporting experimental studies to facilitate result interpretation and reproducibility, and must be carefully considered when developing decontamination guidelines. IMPORTANCE Heat is a powerful weapon against most infectious agents. It is widely used for decontamination of medical, laboratory, and personal protective equipment, and for biological samples. There are many methods of heat treatment, and methodological details can affect speed and efficacy of decontamination. We applied four different heat-treatment procedures to liquid specimens containing SARS-CoV-2. Our results show that the container used to store specimens during decontamination can substantially affect inactivation rate; for a given initial level of contamination, decontamination time can vary from a few minutes in closed vials to several hours in uncovered plates. Reviewing the literature, we found that container choices and heat treatment methods are only rarely reported explicitly in methods sections. Our study shows that careful consideration of heat-treatment procedure-in particular the choice of specimen container and whether it is covered-can make results more consistent across studies, improve decontamination practice, and provide insight into the mechanisms of virus inactivation.