Exposure to bisphenol A from bis-glycidyl dimethacrylate-based dental sealants

Bisphenol A (BPA) and neurological disorders: An overview

The human body is commonly exposed to bisphenol A (BPA), which is widely used in consumer and industrial products. BPA is an endocrine-disrupting chemical that has adverse effects on human health. In particular, many studies have shown that BPA can cause various neurological disorders by affecting brain development and neural function during prenatal, infancy, childhood, and adulthood exposure. In this review, we discussed the correlation between BPA and neurological disorders based on molecular cell biology, neurophysiology, and behavioral studies of the effects of BPA on brain development and function. Recent studies, both animal and epidemiological, strongly indicate that BPA significantly impacts brain development and function. It hinders neural processes, such as proliferation, migration, and differentiation during development, affecting synaptic formation and activity. As a result, BPA is implicated in neurodevelopmental and neuropsychiatric disorders like autism spectrum disorder (ASD), attention-deficit hyperactivity disorder (ADHD), and schizophrenia.

Impact of bisphenol A and analogues eluted from resin-based dental materials on cellular and molecular processes: An insight on underlying toxicity mechanisms

Dental resin systems, used for artificial replacement of teeth and their surrounding structures, have gained popularity due to the Food and Drug Administration's (FDA) recommendation to reduce dental amalgam use in high-risk populations and medical circumstances. Bisphenol A (BPA), an endocrine-disrupting chemical, is an essential monomer within dental resin in the form of various analogues and derivatives. Leaching of monomers from resins results in toxicity, affecting hormone metabolism and causing long-term health risks. Understanding cellular-level toxicity profiles of bisphenol derivatives is crucial for conducting toxicity studies in in vivo models. This review provides insights into the unique expression patterns of BPA and its analogues among different cell types and their underlying toxicity mechanisms. Lack of a consistent cell line for toxic effects necessitates exploring various cell lines. Among the individual monomers, BisGMA was found to be the most toxic; however, BisDMA and BADGE generates BPA endogenously and found to elicit severe adverse reactions. In correlating in vitro data with in vivo findings, further research is necessary to classify the elutes as human carcinogens or xenoestrogens. Though the basic mechanisms underlying toxicity were believed to be the production of intracellular reactive oxygen species and a corresponding decline in glutathione levels, several underlying mechanisms were identified to stimulate cellular responses at low concentrations. The review calls for further research to assess the synergistic interactions of co-monomers and other components in dental resins. The review emphasizes the clinical relevance of these findings, highlighting the necessity for safer dental materials and underscoring the potential health risks associated with current dental resin systems.

Comprehensive assessment of the estrogenic activity of resin composites

Resin-based dental composites have been developed to restore decayed teeth or modify tooth color due to their excellent physical and chemical properties. Such composites may have intrinsic toxicity due to components released into the mouth during the early stage of polymerization, and afterward as a result of erosion or material decomposition. In addition, resin-based dental composites have potential environmental pollutant by elution of monomers and degradation. Since certain monomers of resin matrices are synthesized from bisphenol A (BPA), which acts as an estrogenic endocrine disruptor, these resin matrices may have estrogenic activity. Therefore, the estrogenic endocrine-disrupting activity of various dental composites should be evaluated. In this study, we evaluated the estrogenic endocrine-disrupting activity of 10 resin composites by using a BRET-based estrogen receptor (ER)α and ERβ dimerization assays and ER transactivation assay. BPA, BisDMA, BisGMA, BisEMA, TEGDMA, HMBP, and DMPA mediated ERα dimerization, and BPA, BisDMA, and DMPA also mediated ERβ dimerization. Except for UDMA and CQ, all the compounds were identified as estrogen agonists or antagonists. In-depth information for the safe use of dental composites was acquired, and it was confirmed how the component of dental composites acts in the ER signaling pathway. Further studies on the low-dose and long-term release of these compounds are needed to ensure the safe use of these resin-based dental composites.

Alterations induced by Bisphenol A on cellular organelles and potential relevance on human health

Bisphenol A (BPA) is a chemical partially soluble in water and exists in a solid state. Its structural similarity with estrogen makes it an endocrine-disrupting chemical. BPA can disrupt signaling pathways at very low doses and may cause organellar stress. According to in vitro and in vivo studies, BPA interacts with various cell surface receptors to cause organellar stress, producing free radicals, cellular toxicity, structural changes, DNA damage, mitochondrial dysfunction, cytoskeleton remodeling, centriole duplication, and aberrant changes in several cell signaling pathways. The current review summarizes the impact of BPA exposure on the structural and functional aspects of subcellular components of cells such as the nucleus, mitochondria, endoplasmic reticulum, lysosome, ribosome, Golgi apparatus, and microtubules and its consequent impact on human health.

Development and evaluation of a novel dietary bisphenol A (BPA) exposure risk tool

BACKGROUND

Exposure to endocrine disrupting chemicals such as bisphenol A (BPA) is primarily from the diet through canned foods. Characterizing dietary exposures can be conducted through biomonitoring and dietary surveys; however, these methods can be time-consuming and challenging to implement.

METHODS

We developed a novel dietary exposure risk questionnaire to evaluate BPA exposure and compared these results to 24-hr dietary recall data from participants (n = 404) of the Diet Intervention Examining The Factors Interacting with Treatment Success (DIETFITS) study, a dietary clinical trial, to validate questionnaire responses. High BPA exposure foods were identified from the dietary recalls and used to estimate BPA exposure. Linear regression models estimated the association between exposure to BPA and questionnaire responses. A composite risk score was developed to summarize questionnaire responses.

RESULTS

In questionnaire data, 65% of participants ate canned food every week. A composite exposure score validated that the dietary exposure risk questionnaire captured increasing BPA exposure. In the linear regression models, utilizing questionnaire responses vs. 24-hr dietary recall data, participants eating canned foods 1-2 times/week (vs. never) consumed 0.78 more servings (p < 0.001) of high BPA exposure foods, and those eating canned foods 3+ times/week (vs. never) consumed 0.89 more servings (p = 0.013) of high BPA exposure foods. Participants eating 3+ packaged items/day (vs. never) consumed 62.65 more total grams of high BPA exposure food (p = 0.036).

CONCLUSIONS

Dietary exposure risk questionnaires may provide an efficient alternative approach to 24-hour dietary recalls to quantify dietary BPA exposure with low participant burden.

TRIAL REGISTRATION

The trial was prospectively registered at clinicaltrials.gov as NCT01826591 on April 8, 2013.

Bio-based Non-estrogenic Dimethacrylate Dental Composite from Cloves

Bisphenol A (BPA), as an endocrine disruptor derived from petroleum-based chemicals, has been prohibited by several regulatory agencies for use in a wide variety of consumer products. For the sake of reducing human exposure to BPA derivatives and in the context of sustainability, it is far-reaching to develop high-performance and low-toxic materials from bountiful biomass sources. The objective of this work was to synthesize 2 bio-based dimethacrylate monomers, 2,2'-dially-4,4'-dimethoxy-5,5'-diglycerolate acrylatediphenylmethane (BEF-EA) and 2,2'-dially-4,4'-dimethoxy-5,5'-diglycerolate methacrylatediphenylmethane (BEF-GMA), using eugenol as the raw material. The estrogenic activity of bio-based bisphenol 2,2'-dially-4,4'-dimethoxy-5,5'-dihydroxydiphenylmethane (BEF) was evaluated and compared with estrogen and commercial bisphenols. After photopolymerization of the di(meth)acrylates diluted with tri(ethyleneglycol) dimethacrylate (TEGDMA), bio-based visible light-curing materials were prepared, and their properties were systematically investigated. Notably, di(meth)acrylates BEF-GMA and BEF-EA derived from these nonestrogenic bio-based phenols exhibited improved biocompatibility and low viscosity (down to 220-280 Pa.s). BEF-GMA and BEF-EA resin matrix exhibits lower volumetric polymerization shrinkage (about 8.5%), high photopolymerization reactivity (>50% in 60 s), and mechanical properties (fracture energy >5.5 N mm; flexural strength of 87-91 MPa, etc), which were comparable or superior to commercial Bis-GMA. The respective bio-based composites still exhibit adequate properties. Therefore, introducing eugenol-based visible light-curable dimethacrylate monomers into dental materials is a potential strategy to establish green sustainability and biocompatible dental materials without BPA.

Monomer release from dental restorative materials containing dimethacrylate resin after bleaching

OBJECTIVE

The aim of this study is to determine the type and amount of monomer released over time after bleaching was applied to dental restorative materials containing dimethacrylate resin.

MATERIALS AND METHODS

Thirteen different restorative materials containing dimethacrylate resin were used in this study. Twenty samples were prepared from each material and the samples were randomly divided into 4 subgroups, namely, office bleaching, home bleaching, and separate control group for each of the bleaching methods. After bleaching, the samples were stored in 75% ethanol solution for 1, 14, and 28 days. Analysis of the samples collected to determine the type and amount of residual monomer released from the materials was performed using a liquid chromatography-tandem mass/mass spectrometer (LC-MS/MS). Data were analyzed using Friedman and Kruskal-Wallis tests. Statistical significance level was taken as p < 0.05.

RESULTS

In terms of bleaching groups, mostly no significant difference was found between the groups in each time period in restorative materials (p > 0.05). In terms of time periods, it was determined that the amount of release of all monomers was decreased over time. In terms of restorative materials, the highest monomer release was detected in composite resin groups and the least monomer release was detected in CAD/CAM blocks.

CONCLUSION

Although monomers were released from all materials, bleaching did not affect the amount of released monomer. Amounts of released monomers were generally below toxic limits.

CLINICAL RELEVANCE

Within the limits of this study, bleaching does not significantly affect monomer release in restorative materials containing dimethacrylate resin.

Effect of at-home bleaching gels with different thickeners on the physical properties of a composite resin without bisphenol A

OBJECTIVE

To investigate, in vitro, the influence of at-home bleaching with 16% carbamide peroxide (CP) gels containing different thickeners on the color, gloss, roughness, and microhardness of a composite resin with bisphenol A (BPA) and without bisphenol A (BPA-free).

MATERIAL AND METHODS

Cylindrical samples (7 × 2 mm) of a composite resin with BPA (Filtek Z350 XT®; 3M/ESPE) and composite resin BPA-free (Vittra APS®; FGM) were subdivided into six subgroups (n = 12), according to the bleaching gel used: no bleaching (control), commercial gel with 16% CP and carbopol, experimental gel with 16% CP and carbopol, experimental gel with 16% CP and natrosol, experimental gel with carbopol and experimental gel with natrosol. At the end of the experimental phase, the specimens were analyzed for color (ΔE*_ab and ΔE₀₀ ), surface roughness (Ra), gloss (GU), and surface microhardness (SMH). The data for all analyzes were submitted to Levene's test, Shapiro-Wilk's test and ANOVA.

RESULTS

For ΔE*_ab and ΔE₀₀ no statistically significant differences were found between all groups evaluated. Bleaching with experimental 16% CP gel with carbopol resulted in the lowest GU values for both composite resins evaluated. 16% CP experimental gel with natrosol resulted in higher Ra for the BPA composite resin and the bleaching with natrosol resulted in higher Ra for BPA-free. About 16% CP experimental gel with carbopol and 16% CP experimental gel with natrosol resulted in the lowest final SMH for composite resin with BPA. For the BPA-free composite resin, no differences were found between the groups in SMH for the same resin, however they presented the lowest values compared with all others groups.

CONCLUSION

The effects on physical properties are dependent on the composition of the composite resin and the thickener/bleaching gel used. The BPA-free composite resin showed less changes after exposure to bleaching agent, although its initial physical properties were worse compared to a bleached BPA.

CLINICAL RELEVANCE

The hydrogen peroxide and thickener of the at-home bleaching gel does impact the properties of composites with BPA or BPA-free such as gloss, roughness and surface microhardness, extremely important factors for maintaining an aesthetically and physically satisfactory restoration. BPA-free composite resins have inferior properties after at-home bleaching with different thickeners.

Culturing and Molecular Approaches for Identifying Microbiota Taxa Impacting Children's Obesogenic Phenotypes Related to Xenobiotic Dietary Exposure

Integrated data from molecular and improved culturomics studies might offer holistic insights on gut microbiome dysbiosis triggered by xenobiotics, such as obesity and metabolic disorders. Bisphenol A (BPA), a dietary xenobiotic obesogen, was chosen for a directed culturing approach using microbiota specimens from 46 children with obesity and normal-weight profiles. In parallel, a complementary molecular analysis was carried out to estimate the BPA metabolising capacities. Firstly, catalogues of 237 BPA directed-cultured microorganisms were isolated using five selected media and several BPA treatments and conditions. Taxa from Firmicutes, Proteobacteria, and Actinobacteria were the most abundant in normal-weight and overweight/obese children, with species belonging to the genera Enterococcus, Escherichia, Staphylococcus, Bacillus, and Clostridium. Secondly, the representative isolated taxa from normal-weight vs. overweight/obese were grouped as BPA biodegrader, tolerant, or resistant bacteria, according to the presence of genes encoding BPA enzymes in their whole genome sequences. Remarkably, the presence of sporobiota and concretely Bacillus spp. showed the higher BPA biodegradation potential in overweight/obese group compared to normal-weight, which could drive a relevant role in obesity and metabolic dysbiosis triggered by these xenobiotics.

Bisphenol A Release from Dental Composites and Resin-Modified Glass Ionomers under Two Polymerization Conditions

Bisphenol A (BPA)-based monomers are commonly contained in dental resin-based materials. As BPA is an endocrine disruptor, its long-term release from restorative composites and resin-modified glass ionomers (RM-GICs) under two polymerization conditions was measured in this study. Specimens of two conventional composites containing BPA-based monomers, two “BPA-free” composites, and two RM-GICs were polymerized from one side for 20 s at 1300 mW/cm² or for 5 s at 3000 mW/cm². The amounts of BPA released in artificial saliva and methanol after 1, 4, 9, 16, 35, 65, 130, and 260 days were measured using liquid chromatography–tandem mass spectrometry. The highest amounts of BPA were released from conventional composites, followed by RM-GICs, while the least was released from “BPA-free” composites. Amounts of released BPA were significantly higher in methanol and decreased gradually after the first day. Fast polymerization (5 s at 3000 mW/cm²) resulted in a significantly higher release of BPA after 1 day, but the effect of polymerization conditions was not significant overall. In conclusion, fast polymerization increased the initial release of BPA, but the released amounts were significantly lower than the current tolerable daily intake (4 μg/kg body weight/day) even in methanol, representing the worst-case scenario of BPA release.

Preparation and evaluation of novel bio-based Bis-GMA-free dental composites with low estrogenic activity

OBJECTIVE

Although bisphenol Aglycidyl methacrylate (Bis-GMA) are widely used in the dental composite, its raw materials include the petroleum-based product bisphenol A (BPA) with high estrogenic activity (EA). In this study, two new BPA-free dimethacrylate monomers from bio-based material creosol were synthesized and evaluated.

METHODS

The renewable bisphenol monomer 5, 5'-methylenedicreosol (BCF) was prepared from bio-based material creosol. By the human breast cancer cells (MCF-7 cells) proliferation assay, a risk assessment of BCF was performed to determine if BCF possessed reduced EA in comparison to BPA. Then, the novel monomers 5, 5'-methylenedicreosol diglycidyl ether diacrylate (BCF-EA) and 5, 5'-methylenedicreosol diglycidyl ether dimethacrylate (BCF-GMA) were synthesized from BCF with epichlorohydrin and (meth)acrylate. All products were investigated by ¹H NMR and FT-IR spectra. The control resin was a mixture based on Bis-GMA and tri(ethyleneglycol) dimethacrylate (TEGDMA) with a weight ratio of 5:5 (5B5T). Similarly, experimental resin matrix was a mixture based on BCF-EA/TEGDMA (5E5T) and BCF-GMA/TEGDMA (5G5T). And their corresponding composites were then prepared with corresponding resin matrices and hybrid SiO₂ (5E5TC, 5G5TC and 5B5TC). The properties of these composites were investigated according to the standard or referenced methods. Each sample was evaluated for double bond conversion (DC), shrinkage stress (SS) and volumetric polymerization shrinkage (VS). Water sorption (WS), water solubility (SL), mechanical properties and cytotoxicity were also measured.

RESULTS

¹H NMR and FT-IR spectra confirmed the chemical structure of each monomer. EA test revealed that bio-based bisphenol monomer BCF as the precursor of BCF-EA and BCF-GMA showed lower EA than BPA. Cured resin matrix: Both 5E5T and 5G5T had nearly the same DC (p < 0.05), which was higher than 5B5T (p < 0.05); 5E5T and 5G5T had lower VS, SL and cytotoxicity than 5B5T (p < 0.05); mechanical properties of 5E5T and 5G5T were all better than those of 5B5T (p < 0.05). Cured composite: There was no significant difference in conversion (p < 0.05); 5E5TC and 5G5TC had significantly lower VS (p < 0.05); WS of 5E5TC and 5G5TC were similar (p < 0.05), but higher compared to 5B5TC (p < 0.05); 5E5TC and 5G5TC had the deeper depth of cure (p > 0.05); before water immersion, there was no significant difference in flexural strength between 5E5TC and 5G5TC (p > 0.05), and higher than 5B5TC (p < 0.05); 5E5TC and 5G5TC showed less cytotoxicity than 5B5TC (p < 0.05).

SIGNIFICANCE

The new BPA-free di(meth)acrylates are promising photocurable dental monomers owning to bio-based raw material, high degree of conversion coupled with low curing shrinkage and good mechanical properties. Therefore, BCF-EA and BCF-GMA has a potential to be used as the substitution for Bis-GMA to prepare Bis-GMA-free dental composite.

A fabric phase sorptive extraction method for the LC-UV determination of bisphenol A and leaching monomers from dental materials in human saliva

A rapid and simple fabric phase sorptive extraction (FPSE) procedure is developed for the simultaneous extraction of four monomers (Bisphenol A, BPA; Triethylene glycol dimethacrylate, TEGDMA; Urethane dimethacrylate, UDMA; Bisphenol A-glycidyl methacrylate, BisGMA) in human saliva, prior to the determination by high pressure liquid chromatography with an ultraviolet-visible detector. FPSE is a green sample preparation technique, harmonized with the principles of Green Analytical Chemistry (GAC), which utilizes a flexible surface, such as cellulose, chemically coated with a polymeric material using sol-gel technology. FPSE membranes are characterized by superior chemical stability and any solvent or solvent mixture can be used for elution. Among twelve different sol-gel coated membranes, an FPSE membrane coated with sol-gel polytetrahydrofuran (sol-gel PTHF) was found optimum to extract four target compounds from saliva samples, which were first centrifuged. Parameters with most significant impact on the extraction efficiency of FPSE including elution solvent, utilization of magnetic stirring, extraction time have been comprehensively studied and optimized. The studied compounds' separation was carried out by a Perfect Sil 120 ODS-2 chromatographic column (250 mm × 4.0 mm, 5 μm), using a mobile phase constituting of acetonitrile-water 70:30 % v/v (isocratic elution). The total analysis time was 10 min. Detection was achieved by an ultraviolet-visible detector at 220 nm. The method was validated in terms of sensitivity, linearity, trueness, precision, selectivity and stability of samples. For all four compounds, the limit of detection and the limit of quantification were 0.075 ng/μL and 0.25 ng/μL, respectively. Relative recovery rates were between 90.0 and 106.7%, while RSD values were <8.1 and 12% for interday and intraday repeatability, respectively. Youden & Steiner approach was applied to study method's ruggedness and reusability of the media was tested, which enhanced the green nature of technique.

Bisphenol A release from short-term degraded resin-based dental materials

OBJECTIVES

There is still much debate about the release of bisphenol A (BPA) from resin-based dental materials. Therefore, this study aimed to quantify BPA present as an impurity and to evaluate whether their degradation by salivary, bacterial, and chemical challenges could increase its release.

METHODS

BPA was determined in three different amounts (300, 400, and 500 µg) of eight unpolymerized resin-based materials (four composites, one fissure sealant, two adhesives and one root canal sealer). Next, polymerized samples (n = 5) of each material were immersed in 1 mL of whole human pooled saliva collected from adults, Streptococcus mutans (2 × 10⁷ CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media, respectively. The amount of BPA was quantified using an UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride.

RESULTS

Only the composites contained trace amounts of BPA above the limit of quantification (ranging from 301±32 pg PBA/mg to 1534±62 pg BPA/mg), most likely as impurity from the synthesis of the monomers. The amounts of BPA released from polymerized materials upon salivary and bacterial degradation were too low for accurate quantification, but in water, quantifiable amounts of BPA were released from all materials. In alkaline media, the BPA release from two composites was significantly decreased, while the release from one adhesive was significantly increased, compared to water.

CONCLUSIONS

BPA already present in unpolymerized resin-based materials may account for the release of BPA after polymerization. There was no clear indication that short-term material degradation leads to increased release of BPA.

Overview of the Mechanisms of Action of Selected Bisphenols and Perfluoroalkyl Chemicals on the Male Reproductive Axes

Male fertility has been deteriorating worldwide for considerable time, with the greatest deterioration recorded mainly in the United States, Europe countries, and Australia. That is, especially in countries where an abundance of chemicals called endocrine disruptors has repeatedly been reported, both in the environment and in human matrices. Human exposure to persistent and non-persistent chemicals is ubiquitous and associated with endocrine-disrupting effects. This group of endocrine disrupting chemicals (EDC) can act as agonists or antagonists of hormone receptors and can thus significantly affect a number of physiological processes. It can even negatively affect human reproduction with an impact on the development of gonads and gametogenesis, fertilization, and the subsequent development of embryos. The negative effects of endocrine disruptors on sperm gametogenesis and male fertility in general have been investigated and repeatedly demonstrated in experimental and epidemiological studies. Male reproduction is affected by endocrine disruptors via their effect on testicular development, impact on estrogen and androgen receptors, potential epigenetic effect, production of reactive oxygen species or direct effect on spermatozoa and other cells of testicular tissue. Emerging scientific evidence suggests that the increasing incidence of male infertility is associated with the exposure to persistent and non-persistent endocrine-disrupting chemicals such as bisphenols and perfluoroalkyl chemicals (PFAS). These chemicals may impact men’s fertility through various mechanisms. This study provides an overview of the mechanisms of action common to persistent (PFAS) and nonpersistent (bisphenols) EDC on male fertility.

Urinary bisphenol A and its alternatives among pregnant women: Predictors and risk assessment

BACKGROUND

Exposure to bisphenol A (BPA) has been associated with various adverse health outcomes. Recently, an increasing concern on its alternatives such as bisphenol S (BPS) and bisphenol F (BPF) has been aroused due to the restriction use of BPA. Few studies have identified predictors of exposure to BPA alternatives and assessed their health risks.

OBJECTIVE

The aim of this study was to identify predictors of BPA and its alternatives and to assess their health risks among pregnant women.

METHODS

We detected first morning urinary concentrations of BPA and its alternatives (BPS and BPF) among 1097 pregnant women from an established Chinese cohort. A questionnaire was conducted to obtain demographic characteristics, dietary habits, and lifestyles. We examined the predictors of creatinine-adjusted urinary BPA and its alternatives concentrations using multivariable linear regression. Risk assessment of exposure to BPA and its alternatives was calculated based on the estimated of daily intake (EDI).

RESULTS

Geometric means of creatinine-adjusted urinary BPA, BPF, and BPS were 0.92, 0.12, and 0.08 μg/g creatinine, respectively. Pregnant women from Wuhan had lower concentrations of BPA, BPF, and ∑BPs (sum of BPA, BPF, and BPS) than those from Xiaogan. Intake of fried food was related to higher concentrations of BPA, and intake of pickled food was associated with higher concentrations of BPF and ∑BPs. The maximum EDI values for exposure to BPA, BPF, BPS, and ∑BPs ranged from 5.6428 to 13.3356 nmol/kg body weight/day, which were below the tolerable daily intake (TDI) for BPA defined by the European Food Safety Authority (EFSA) (18 nmol/kg body weight/day). The maximum hazard index (HI) value was 0.7409.

CONCLUSION

Several predictors identified in this study may inform public recommendations to reduce exposure to BPA and its alternatives.

Investigation of the Impact of Dental Care via Composite Resin Restoration among Children with Attention Deficit Hyperactivity Disorder: A Registry-Based Nested Case-Control Study

Attention deficit hyperactivity disorder (ADHD) is one of the most common psychiatric conditions. Many studies have shown that exposure to low-dose bisphenol-A (BPA) can contribute to ADHD. The relationship between ADHD and composite resin is still unclear. We designed a nested case-control study to investigate the relationship between ADHD and composite resin restorations among children from the Taiwan's National Health Insurance Research Database. We included 85,503 people whose birth years were between 1998 and 2005 and who received resin restoration from January 2000 to December 2008. A 1:2 matched control sample without ADHD was randomly selected from the database by propensity score matching based on birth year and sex. We identified 4984 individuals as ADHD patients. The average diagnostic age of ADHD was 7.45 years old. The patients who received composite resin restorations had higher risk of ADHD than those who had never received them (aOR (adjusted odds ratio) = 1.25; 95% CI (confidence interval) = 1.13-1.38). Males had a higher risk of ADHD (aOR = 1.29; 95% CI = 1.14-1.43). Taken together, this nested case-control study demonstrated a positive association between ADHD and dental care via composite resin restoration in Taiwanese children. Prospective clinical studies of the relationship between ADHD and composite resin are warranted.

Bisphenol A as degradation product of monomers used in resin-based dental materials

OBJECTIVE

There is still much debate about the release of bisphenol-A (BPA) from dental materials. Therefore, this study aimed to quantify BPA present as an impurity in both BPA-based and non-BPA-based monomers and to evaluate whether these monomers may degrade to BPA upon salivary, bacterial, and chemical challenges.

METHODS

BPA was determined in three different amounts (1, 2, and 3 μmol) of each monomer (TEGDMA, UDMA, mUDMA, BisGMA, BisEMA-3, -6, -10, -30, BisPMA, EBPADMA urethane, BADGE, and BisDMA). Next, the monomers (3 μmol) were immersed in whole human pooled saliva collected from adults, Streptococcus mutans (2 × 10⁷ CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media. The amount of BPA was quantified using a specific and highly sensitive UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride.

RESULTS

The monomers BisGMA and BisEMA-3 contained trace amounts (0.0006% and 0.0025%, respectively) of BPA as impurities of their synthesis process. BPA concentrations increased when the monomers BisGMA, BisEMA-3, BisEMA-6, BisEMA-10, BisPMA and BADGE were exposed to saliva and S. mutans, indicating degradation of a small amount of monomer into BPA. In addition, BisPMA and BADGE degraded into BPA under alkaline conditions. The conversion rate of the monomers into BPA ranged between 0.0003% and 0.0025%.

SIGNIFICANCE

Impurities and degradation of BPA-based monomers may account for the release of BPA from resin-based dental materials. Even though the detected amounts of BPA due to monomer impurity were small, manufacturers of dental materials can reduce the BPA content by using only monomers of the highest purity. Considering the overall current trend towards BPA-free materials, it may be recommendable to investigate whether non-BPA based monomers can be used in dental resin-based materials.

Pregnancy and Dentistry: A Literature Review on Risk Management during Dental Surgical Procedures

Background: Pregnancy is a unique moment in a woman’s life, accompanied with several physiologic changes that have an impact on oral health. Aim of the study: The purpose of the present study was to conduct a critical review of published literature regarding pregnancy and dentistry, the most frequent oral diseases that are encountered during pregnancy, their correlation to adverse pregnancy events, and safe dental treatments that can be performed during pregnancy. Methods: A Medline/COCHRANE search was carried using specific keywords and MeSH terms, combined with the boolean operators “OR” and “AND”. Results: The search led to 146 publications including guidelines, meta-analyses, systematic and non-systematic reviews, published between 2000 and 2021. Discussion and conclusions: Due to the increased inflammatory and immune body response that characterizes pregnancy, periodontal conditions are often aggravated during pregnancy and periodontal disease encountered frequently in pregnant patients. There are conflicting study results in the literature regarding the association between periodontitis and adverse pregnancy outcomes. Periodontal treatment did not show a significant reduction in the adverse outcomes. Many dentists, often due to lack of information, are reluctant to provide dental treatment to pregnant women. However, preventive and restorative dental treatment is safe during pregnancy. Diagnostic radiographs may be performed after the first trimester if absolutely necessary. Analgesics (such as paracetamol) and anesthetics (such as lidocaine) are also considered safe. In case of infection, antibacterial drugs such as amoxicillin, ampicillin, and some cephalosporines and macrolides can also be prescribed. Organogenesis takes place in the first trimester, the time during which the fetus is susceptible to severe malformations (teratogenesis). The ideal time to perform dental treatment is the second trimester (week 17 to 28). However, acute pain or infections make the intervention of the dentist absolutely necessary and emergency treatment can be performed during the whole pregnancy period.

An integrative review on the toxicity of Bisphenol A (BPA) released from resin composites used in dentistry

The main aim of this study was to perform an integrative review on the release of bisphenol A (BPA) from resin-matrix composites and potential toxic effects. A bibliographic search was performed on the PubMed platform using the following keywords: "Bisphenol A" OR "BPA" AND "resin composite" OR "composite resin" AND "toxicity" OR "cytotoxicity" OR "release". Inclusion criteria involved in vitro and in vivo studies on the release and toxicity of BPA. Results highlighted the release of BPA from resin-matrix composites due to insufficient polymerization and/or degradation of the polymeric matrix. BPA is part of the organic matrix of resin-matrix composites and may be hydrolysed in human saliva, although studies report that low doses might not be detected by traditional chemical analysis. Studies exposing zebrafish embryos to different concentrations of Bis-GMA, showed 55% mortality at 10 μM Bis-GMA while 30% mortality was recorded at 1 μM Bis-GMA. In patients, a BPA concentration of around 2.09 × 10^-2 μg/ml was found in the saliva after placement of lingual orthodontic retainers with resin-matrix composites. Also, the BPA molecule can be swallowed and absorbed by the oral/gastrointestinal mucosa, which might result in systemic toxicity. The degradation of resin-matrix composites and release of BPA in oral environment are dependent on the organic matrix content and on the polymerization method. A increased release of BPA can lead to the absorption into oral and gastrointestinal mucosa with high risks of local and systemic toxicity.

Effects of Bisphenol A Released From Composite Fillings on Reproductive Hormone Levels in Men

Objectives

Composite resins are the most preferred filling material because of their excellent aesthetic qualities. However, a filling material should also be biocompatible as well as aesthetic. The aim of this study was to determine the serum and saliva bisphenol-A (BPA) levels and to examine the effects of serum BPA on reproductive hormone levels after healthy men were treated with composite fillings.

Methods

Eighteen healthy males each received 2 composite restorations. Saliva and blood samples of subjects were collected before resin application and 1 day and 1, 3, and 5 weeks after the resin was applied. BPA amounts in samples were detected using high-performance liquid chromatography (HPLC). Serum gonadotropins, testosterone, sex hormone binding globulin, free androgen index, and oestrogen levels were measured with radioimmunological assay kits. Statistical analysis of data was made using Friedman, Wilcoxon signed ranks and Mann-Whitney U tests (α = 0.05).

Results

The amount of BPA released from composite resins over time was not significantly elevated in either saliva or serum (P > 0.5). In addition, serum BPA levels were significantly higher than saliva BPA levels for both composites (P < .05), but saliva and serum BPA levels were not statistically different when comparing the 2 composites (P > .05).

Conclusions

BPA from composite resins used in this study did not significantly alter serum hormone levels.

Sex-specific associations of prenatal exposure to bisphenol A and its alternatives with fetal growth parameters and gestational age

BACKGROUND

Bisphenol A (BPA) can cause detrimental effects on fetal growth. However, the effects of BPA alternatives, such as bisphenol F (BPF) and bisphenol S (BPS), on fetal growth are less known.

OBJECTIVE

To investigate the relationships of prenatal BPA, BPF, and BPS exposures with fetal growth parameters and gestational age.

METHODS

Urinary BPA, BPF, and BPS were measured in 1,197 pregnant women before delivery in a Chinese cohort. The associations of prenatal exposure to BPA, BPF, and BPS with fetal growth parameters and gestational age were examined, and associations stratified by fetal sex were also conducted. We used a restricted cubic splines (RCS) model to examine the dose-response associations between exposures and outcomes.

RESULTS

Maternal urinary BPA and BPF were negatively related to birth length (-0.30 cm, 95% CI: -0.44, -0.15 and -0.21 cm, 95% CI: -0.36, -0.07 comparing the extreme exposure groups, respectively, both p for trends < 0.01). These associations were more pronounced in girls with inverted U-shaped dose-response relationships. Maternal urinary BPA and BPF were positively related to ponderal index (0.05 g/cm³ × 100, 95% CI: 0.01, 0.09 and 0.04 g/cm³ × 100, 95% CI: 0.01, 0.08 comparing the extreme exposure groups, respectively, both p for trends = 0.02), and maternal urinary BPS was associated with shorter gestational age (-0.20 weeks, 95% CI: -0.37, -0.03 comparing the extreme exposure groups, p for trend = 0.02). These associations were only observed in girls and exhibited a linear dose-response relationship.

CONCLUSIONS

Prenatal BPA, BPF, and BPS exposures were associated with detrimental effects on fetal growth parameters, and stronger effects were noted in female infants.

Pit and fissure sealants versus fluoride varnishes for preventing dental decay in the permanent teeth of children and adolescents

BACKGROUND

Most of the detected increment in dental caries among children above the age of six years and adolescents is confined to occlusal surfaces of posterior permanent molars. Dental sealants and fluoride varnishes are much used to prevent caries. As the effectiveness of both interventions in controlling caries as compared with no intervention has been demonstrated previously, this review aimed to evaluate their relative effectiveness. It updates a review published originally in 2006 and updated in 2010 and in 2016.

OBJECTIVES

Our primary objective was to evaluate the relative effectiveness of dental sealants (i.e. fissure sealant) compared with fluoride varnishes, or fissure sealants plus fluoride varnishes compared with fluoride varnishes alone, for preventing dental caries in the occlusal surfaces of permanent teeth of children and adolescents. Our secondary objectives were to evaluate whether effectiveness is influenced by sealant material type and length of follow-up, document and report on data concerning adverse events associated with sealants and fluoride varnishes, and report the cost effectiveness of dental sealants versus fluoride varnish in caries prevention.

SEARCH METHODS

Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health's Trials Register (to 19 March 2020), the Cochrane Central Register of Controlled Trials (CENTRAL) (the Cochrane Library, 2020, Issue 2), MEDLINE Ovid (1946 to 19 March 2020) and Embase Ovid (1980 to 19 March 2020). We searched the US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. There were no restrictions on the language or date of publication.

SELECTION CRITERIA

We included randomised controlled trials with at least 12 months of follow-up comparing fissure sealants, or fissure sealants plus fluoride varnishes, versus fluoride varnishes, for preventing caries in the occlusal surfaces of permanent posterior teeth (i.e. premolar or molar teeth), in participants younger than 20 years of age at the start of the study.

DATA COLLECTION AND ANALYSIS

At least two review authors independently screened search results, extracted data from included studies and assessed their risk of bias. We attempted to contact study authors to obtain missing or unclear information. We grouped and analysed studies on the basis of sealant material type: resin-based sealant or glass ionomer-based sealant (glass ionomer and resin-modified glass ionomer sealant), and different follow-up periods. We calculated the odds ratio (OR) for risk of caries on occlusal surfaces of permanent molar teeth. For trials with a split-mouth design, we used the Becker-Balagtas OR. One cluster-randomised trial provided precise estimates in terms of risk ratio (RR), which we used. For continuous outcomes and data, we used means and standard deviations to obtain mean differences (MD). For meta-analysis, we used the random-effects model when we combined data from four or more studies. We presented all measures with 95% confidence intervals (CIs). We assessed the certainty of the evidence using GRADE criteria.

MAIN RESULTS

We included 11 trials with 3374 participants aged five to 10 years when trials started. Three trials are new since the 2016 update. Two trials did not contribute data to our analysis. Sealant versus fluoride varnish Resin-based fissure sealants versus fluoride varnishes Seven trials evaluated this comparison (five contributing data). We are uncertain if resin-based sealants may be better than fluoride varnish, or vice versa, for preventing caries in first permanent molars at two to three years' follow-up (OR 0.67, 95% CI 0.37 to 1.19; I² = 84%; 4 studies, 1683 children evaluated). One study measuring decayed, missing and filled permanent surfaces (DMFS) and decayed, missing and filled permanent teeth (DMFT) increment at two years suggested a small benefit for fissure sealant (DMFS MD -0.09, 95% CI -0.15 to -0.03; DMFT MD -0.08, 95% CI -0.14 to -0.02; 542 participants), though this may not be clinically significant. One small study, at high risk of bias, reported a benefit for sealant after four years in preventing caries (RR 0.42, 95% CI 0.21 to 0.84; 75 children) and at nine years (RR 0.48, 95% CI 0.29 to 0.79; 75 children). We assessed each of these results as having very low certainty. Glass ionomer-based sealants versus fluoride varnishes Three trials evaluated this comparison: one trial with chemically cured glass ionomer and two with resin-modified glass ionomer. Studies were clinically diverse, so we did not conduct a meta-analysis. In general, the studies found no benefit of one intervention over another at one, two and three years, although one study, which also included oral health education, suggested a benefit from sealants over varnish for children at high risk of caries. We assessed this evidence as very low certainty. Sealant plus fluoride varnish versus fluoride varnish alone One split-mouth trial analysing 92 children at two-year follow-up found in favour of resin-based fissure sealant plus fluoride varnish over fluoride varnish only (OR 0.30, 95% CI 0.17 to 0.55), which represented a clinically meaningful effect of a 77% reduction in caries after two years; however, we assessed this evidence as very low certainty. Adverse events Five trials (1801 participants) (four using resin-based sealant material and one using resin-modified glass ionomer) reported that no adverse events resulted from use of sealants or fluoride varnishes over one to nine years. The other studies did not mention adverse events.

AUTHORS' CONCLUSIONS

Applying fluoride varnish or resin-based fissure sealants to first permanent molars helps prevent occlusal caries, but it has not been possible in this review to reach reliable conclusions about which one is better to apply. The available studies do not suggest either intervention is superior, but we assessed this evidence as having very low certainty. We found very low-certainty evidence that placing resin-based sealant as well as applying fluoride varnish works better than applying fluoride varnish alone. Fourteen studies are currently ongoing and their findings may allow us to draw firmer conclusions about whether sealants and varnish work equally well or whether one is better than the other.

A Prospective Cohort Study of Bisphenol A Exposure from Dental Treatment

Laboratory studies show that bisphenol A (BPA) leaches from bisphenol A-glycidyl methacrylate (bisGMA)-based dental materials. We aimed to quantify the extent to which children are exposed to BPA from dental treatment with bisGMA materials, by amount of treatment and type of sedation. We hypothesized that posttreatment urinary BPA (uBPA) concentrations would be higher among patients with more surfaces treated with bisGMA-based materials and among patients receiving general anesthesia compared with pretreatment concentrations. We conducted a prospective cohort study in 211 children, 4 to 12 y old, who had no prior resin-based dental treatment. We measured uBPA concentrations twice before treatment and at 2 d and 1, 4, and 16 wk posttreatment. We abstracted treatment data (surfaces treated) from the chart. We generated descriptive statistics and compared pre- and posttreatment uBPA concentrations using generalized estimating equations. Participants were 51% female, 46% non-White, and 74% publicly insured. The median age was 6 y. The mean number of tooth surfaces exposed to BisGMA materials (composites/sealants) was 7.5 (SD 5.3). Overall, uBPA concentrations were 86% higher (95% confidence interval [CI] 42% to 143%, P < 0.001) at 2 d posttreatment compared with pretreatment concentrations. The uBPA concentrations 2 d posttreatment versus pretreatment tended to be higher (112%, 95% CI 53% to 194%) among those receiving treatment on >4 surfaces than those receiving treatment on ≤4 surfaces (50%, 95% CI -2% to 130%). Two days after treatment, uBPA was significantly higher than pretreatment concentrations in children receiving nitrous oxide but not in those receiving general anesthesia. Among all findings, uBPA concentrations returned to baseline by 4 wk. Children experience short-term increases in BPA from dental treatment. The impact of relatively high, short-term BPA exposure on child health is unknown. Given the widespread use of BisGMA-based dental materials and that chronic low-dose BPA exposure may adversely affect child health, strategies that minimize BPA exposure could potentially improve child health.

Protective effect of crocin on bisphenol A - induced spatial learning and memory impairment in adult male rats: Role of oxidative stress and AMPA receptor

OBJECTIVES

Bisphenol A (BPA), a xenoestrogenic endocrine disrupting agent, is widely used in the production of polycarbonate plastics and has potential adverse effects on the developing nervous system, memory and learning abilities. The protective effect of the crocin, an important active constituent in Crocus sativus L, on memory impairment induced by BPA in rat was determined through evaluation of oxidative stress and the level of NMDA (N-methyl-D-aspartate receptors) and AMPA (α-amino-3-hydroxy-5-methyl-4-isoxazole-propionicd acid) receptors.

MATERIALS AND METHODS

Rats were orally treated with BPA (100 mg/kg) or sesame seed oil in control group for 28 days. Crocin (10, 20, and 40 mg/kg, IP) was administrated in BPA-orally treated groups for 28 days. Memory and learning functions were evaluated by Morris water maze. The level of malondialdehyde (MDA) and glutathione (GSH) contents were determined in rat hippocampus. Additionally, the expression of NMDA and AMPA receptors were analyzed using Western blot method.

RESULTS

Administration of BPA significantly reduced memory and learning functions. Crocin significantly protected against learning and memory impairments induced by BPA. BPA administration markedly reduced GSH content and induced lipid peroxidation, while crocin was able to increase GSH content in rat hippocampus. The expression of NMDA receptor did not change in BPA-treated rats, while the significant reduction in AMPA receptor expression was observed. Moreover, crocin (20 mg/kg) significantly elevated the expression of AMPA receptor.

CONCLUSION

Crocin recovered spatial learning and memory defects induced by BPA in part through anti-oxidant activity and modulation the expression of AMPA receptor in rat hippocampus.

Urinary bisphenol A concentrations and in vitro fertilization outcomes among women from a fertility clinic

Bisphenol A (BPA) is a widespread environmental endocrine disrupting chemical. Although many animals and in vitro studies reported that BPA may affect female fertility through the effect on maturing oocytes and meiotic cell division, but the data from human studies are limited and inconclusive. The study was conducted to examine the association between urinary BPA concentration and in vitro reproductive outcomes (metaphase II (MII) oocyte yield, top quality embryo, fertilization rate, implantation rate and clinical pregnancy) among women from an infertility clinic. The study participants were enrolled in the Infertility Center in Poland. 450 women aged 24-44 (n = 674 IVF cycles) provided urine samples. The urinary concentrations of BPA were evaluated using validated gas chromatography ion-tap mass spectrometry method. Clinical outcomes of IVF treatment were abstracted from patients electronic chart records. To assess the relationship between urinary BPA concentrations early examined reproductive outcomes generalized linear mixed models were used. The detection rate of BPA in urine samples was 98% and the geometric mean 1.59 ± 2.15 ng/ml. A significant decrease was observed between urinary concentration of BPA and implantation (p = 0.04) and decreased MII oocyte count (p = 0.03). There was no association between other examined IVF outcomes: embryo quality, fertilization rate and clinical pregnancy and BPA exposure. Exposure to BPA may have a negative effect during the early stages of human development. The studies among the larger and more diverse population are needed to confirm the results.

Bisphenol S rapidly depresses heart function through estrogen receptor-β and decreases phospholamban phosphorylation in a sex-dependent manner

The health effects of the endocrine disruptor Bisphenol A (BPA) led to its partial replacement with Bisphenol S (BPS) in several products including food containers, toys, and thermal paper receipts. The acute effects of BPS on myocardial contractility are unknown. We perfused mouse hearts from both sexes for 15 min with physiologically relevant doses of BPS or BPA. In females BPS (1 nM) decreased left ventricular systolic pressure by 5 min, whereas BPA (1 nM) effects were delayed to 10 min. BPS effects in male mice were attenuated. In both sexes ER-β antagonism abolished the effects of BPS. Cardiac myofilament function was not impacted by BPS or BPA in either sex, although there were sex-dependent differences in troponin I phosphorylation. BPS increased phospholamban phosphorylation at S16 only in female hearts, whereas BPA reduced phosphorylation in both sexes. BPA decreased phospholamban phosphorylation at T17 in both sexes while BPS caused dephosphorylation only in females. This is the first study to compare sex differences in the acute myocardial response to physiologically relevant levels of BPS and BPA, and demonstrates a rapid ability of both to depress heart function. This study raises concerns about the safety of BPS as a replacement for BPA.

Bisphenol A in human saliva and urine before and after treatment with dental polymer-based restorative materials

The aim of this study was to quantify bisphenol A (BPA) concentrations in saliva and urine before and after treatment with dental polymer-based restorative materials to assess if placement of this material is associated with increased BPA levels in saliva and urine. Twenty individuals in need of at least one dental restoration with polymer-based restorative material were included in this study. The participants were instructed to abstain from eating, drinking, and brushing their teeth for at least 10 h prior to sampling. Saliva and urine were collected before and 10 min (saliva only), 1 h, 24 h, and 1 wk after treatment. Samples were stored at -80°C before analyses. BPA in saliva and urine was determined with liquid chromatography/mass spectrometry. Linear mixed effects regression models were used for statistical analyses. There was a statistically significant increase of salivary BPA concentration directly after placement of the dental polymer-based restorations. Following placement, the concentration of BPA decreased exponentially with time. One week after treatment the BPA level in saliva was only marginally higher than before treatment. In urine, no statistically significant change of the BPA concentration was detected after treatment.

Once Resin Composites and Dental Sealants Release Bisphenol-A, How Might This Affect Our Clinical Management?-A Systematic Review

(1) Background: Bisphenol A (BPA) based dental resins are commonly used in preventive and reparative dentistry. Since some monomers may remain unpolymerized in the application of dental resin, they dissolve in the saliva. (2) Methods: The literature search was carried out in Pubmed, Cochrane and Embase databases. Randomized controlled trials, cohort studies and case-control studies that evaluated BPA levels in human urine, saliva and/or blood were included. (3) Results: The initial search had 5111 results. A total of 20 studies were included in the systematic review. Most studies showed an increase of the levels of bisphenol A 1 h after treatments with composite resins and dental sealants. One week after treatments the levels were decreased. (4) Conclusions: Some clinical precautions should be taken to decrease the release of BPA, namely the use of rubber dam, the immediate polishing of all resins used, or the use of glycerin gel to avoid non-polymerization of the last resin layer, and mouthwash after treatment. Another preventive measure in addition to the above-mentioned is the use of the smallest possible number of restorations or sealants, a maximum of four per appointment. These measures are even more important in children, adolescents and pregnant women.

Bisphenol A in dental materials - existence, leakage and biological effects

OBJECTIVE

Recently, questions have been raised concerning the potential endocrine disrupting effects of bisphenol A (BPA). This substance is a constituent in many different products which we frequently come into contact with, such as food containers and receipts. Resin-based dental filling materials are another source of exposure, although according to previous studies the amount and potential risks are not clear. Thus, the aims of the present study were (1) to identify if direct dental filling materials are liable to leak BPA and (2) to investigate if this leakage could lead to any adverse effects on health.

MATERIALS AND METHODS

A literature search was made with PubMed as the primary source, subsequently complemented with reference tracking.

RESULTS

A total of 26 articles were included, 24 of which were used for the first aim (leakage) and 2 for the second aim (health risks). The majority of studies, including all in vivo studies, showed leakage of BPA from dental materials in various amounts and during different time intervals. The findings showed a contradiction in results regarding the connection between dental materials and adverse health effects.

CONCLUSIONS

There is leakage of BPA from some dental materials, but critical levels are not evident. Bis-DMA contents might convert to BPA in the oral cavity. There is a contradiction between in vitro and in vivo studies concerning BPA leakage and finally, there is a lack of studies investigating the association between BPA exposure and its adverse effects on human health.

A Systematic Review of Exposure to Bisphenol A from Dental Treatment

INTRODUCTION

Dental composite restorations and dental sealants containing bisphenol A glycidyl methacrylate (BisGMA) are commonly used materials in dentistry. Bisphenol A (BPA) is used to manufacture BisGMA and can be a by-product in BisGMA-based dental materials. BPA is an endocrine-disrupting chemical that may affect reproductive, psychological, cognitive, and endocrine-related health. We conducted a systematic review of clinical studies that measured urinary BPA (uBPA) concentrations before and after dental treatment to evaluate the extent to which individuals are exposed to BPA from dental treatment.

METHODS

Eligibility included studies that measured uBPA concentrations before and after dental treatment with any type of resin-based dental material. We searched PubMed, Cochrane, Web of Science, Virtual Health Library, Science Direct, ProQuest, and Clinical Trials with no date or language restrictions to identify published studies. We summarized eligible studies across participant characteristics, amount of treatment, and time of follow-up measures. Because methods of measuring uBPA varied, our primary outcome was the direction and percentage change between baseline and 24 h posttreatment and at later time points as available.

RESULTS

We identified 1,190 abstracts and 7 eligible studies: 4 in children and 3 in adults. In all studies, BPA concentrations increased 24 h after treatment. The 2 studies with the largest sample sizes found statistically significant increases >40% in uBPA concentrations at 24 h posttreatment (both P values <0.01). The 1 study to examine uBPA concentrations beyond 1 mo posttreatment found that concentrations returned to baseline by 14 d after treatment and remained at baseline 6 mo after treatment.

CONCLUSIONS

Our findings suggest that uBPA concentrations increase 24 h after dental treatment. One study showed that uBPA concentrations return to baseline by 14 d. Additional research is needed to determine the magnitude of change from pre- to post-dental treatment and the trajectory of uBPA concentrations posttreatment.

KNOWLEDGE TRANSFER STATEMENT

BPA is an endocrine-disrupting chemical that may have negative human health effects. Our findings suggest that urinary BPA concentrations increase in the short term after dental treatment. The extent to which such an increase may affect the health of patients remains an open question, particularly since there are no established thresholds for safety or harm related to BPA exposure.

Urinary bisphenol A in children, mothers and fathers from Slovenia: Overall results and determinants of exposure

In the present study, urinary bisphenol A (BPA) levels were reported for the first time in the Slovenian general population and were evaluated with regard to dietary and non-dietary exposure sources, and compared according to age, gender and area of residence. First morning urine was collected from children (6-11 years), their mothers (30-52 years) and fathers (30-53 years), living in urban and rural areas of Slovenia. Besides basic questionnaire data on general population characteristics, socio-economic status and dietary habits, BPA-specific data was also collected, including consumption of food and beverages from plastic and canned containers, presence of white dental fillings, the use of specific consumer products and hormonal treatments. Urine samples were analysed for both free and conjugated BPA using GC-MS/MS. The urinary levels of total BPA in children, mothers and fathers were low, with geometric means of 1.51, 0.79, and 0.20 μg/g creatinine, respectively. The levels were comparable with the levels reported for other European countries and were all below the current health-based guidance values. In line with large-scale surveys, the data revealed age-dependant BPA urinary levels, with the highest levels in the youngest age group. In mothers, urinary levels of BPA were determined by hormonal interactions more than dietary sources, while a positive association between urinary BPA and diet was apparent in children (canned food/drink and food from plastic material) and fathers (canned food/drink). The study clearly shows that physiological and behavioural differences account for differences in levels of urinary BPA among study groups, a finding that sets the priorities for future research.

Exposure and dietary sources of bisphenol A (BPA) and BPA-alternatives among mothers in the APrON cohort study

Diet is regarded as the main source of bisphenol A (BPA) exposure, but comparatively little is known about dietary sources of BPA-alternatives. Here we measured exposure of BPA and BPA-alternatives among pregnant women in Canada, estimated their 24-h intakes and examined the importance of various dietary sources. Free and total BPA, bisphenol S (BPS) and bisphenol F (BPF) were measured in 467 second trimester maternal urine samples, and in 455 paired samples collected at three months postpartum. Linear regression was used to evaluate associations between urinary concentrations of bisphenols and 24-h dietary recall data. The geometric means of total BPA in second trimester and postpartum urine (1.2 and 0.95 ng/mL, respectively) were 5-7 times higher than corresponding total BPS (0.16 and 0.17 ng/mL). The detection frequency of BPF was only 9% (i.e. >1.0 ng/mL). However, at both time points 95th percentiles of total BPF (7.3 and 4.2 ng/mL, respectively) were similar to total BPA (8.2 and 5.0 ng/mL). Free BPS and BPF were detected in <2% of samples, but were detectable when total BPS or BPF concentrations were highest, always at <1% of the total concentration. The tolerable daily intake for total BPA (i.e. 18 nmol/kg BW/d) was not exceeded, but for BPS the estimated 24-h intake was as high as 14 nmol/kg BW/d (95th percentile: 0.12 nmol/kg BW/d), and for BPF was even higher among the highest centile of exposure (maximum and 95th percentile: 30, 0.81 nmol/kg BW/d). Canned food consumption was associated with higher total BPA, but was not associated with BPS. For BPF, mustard consumption may be an important exposure source, particularly among the highest exposed. Relatively high exposure to BPS and BPF in a minority of pregnant women highlights the need to better understand the associated health risks and exposure sources of BPA-alternatives.

Mechanical and hydrolytic degradation of an Ormocer®-based Bis-GMA-free resin composite

OBJECTIVES

The aim of the study was to evaluate the mechanical stability of bisphenol A-glycidyl methacrylate (Bis-GMA) and Ormocer-based resin composites before and after water absorption and to examine water saturation.

MATERIAL AND METHODS

Disc-shaped specimens of the Bis-GMA (Grandio SO, Voco) and the Ormocer-based (Admira Fusion, Voco) dental resin composites were produced, stored in water, and weighed after pre-determined times to measure the absorbed water. Bend bars were produced and stored for 24 h in dry conditions as well as in distilled water for 14 days or 60 days at 37 °C. The initial flexural strength (FS) under quasi-static loading and flexural fatigue strength (FFS) under cyclic loading were determined under 4-point bending. Fracture toughness (K_Ic) of both composites was measured using the single-edge-V-notch-beam (SEVNB) technique after the same storage conditions under 3-point bending.

RESULTS

Within the first 14 days, storage conditions did not affect the initial FS of Grandio SO, while a significant drop in initial FS was observed for Admira Fusion after 2 weeks in water and most of the water was absorbed within this time. FFS for the Bis-GMA composite was not reduced before 2 months in water, whereas for the Ormocer®-based composite, there has been a significant decrease in strength after cyclic fatigue already at 2 weeks of water storage. K_Ic of Admira Fusion decreased significantly after both storage periods, while K_Ic of Grandio SO decreased only significantly after 2 weeks of water storage.

CONCLUSION

All mechanical properties of the Bis-GMA composite were superior to those of the Ormocer®-based material, except water sorption.

CLINICAL SIGNIFICANCE

Water storage seems to have a much more pronounced effect on the mechanical properties of Ormocer®-based dental composites in comparison to Bis-GMA-based composites.

Presence and leaching of bisphenol a (BPA) from dental materials

BPA has been reported to leach from some resin based dental restorative materials and materials used for orthodontic treatment. To confirm and update previous findings, especially in light of the new temporary lower threshold value for tolerable daily BPA intake, we have investigated the leaching of BPA from 4 composite filling materials, 3 sealants and 2 orthodontic bonding materials. The materials were either uncured and dissolved in methanol or cured. The cured materials were kept in deionized water for 24 hours or 2 weeks. Samples were subsequently analyzed by ultra-performance liquid chromatography coupled to mass spectrometry (UPLC-MS-MS). The composite filling material Tetric EvoFlow^® and the fissure sealant DELTON^® showed significantly higher levels of BPA leaching compared to control samples for all test conditions (uncured, 24 h leaching and 2 weeks leaching). There were no significant differences in amount of leached BPA for any of the tested materials after 24 hours compared to 2 weeks. These results show that BPA is still released from some dental materials despite the general concern about potential adverse effects of BPA. However, the amounts of BPA were relatively low and most likely represent a very small contribution to the total BPA exposure.

Policy Development Fosters Collaborative Practice: The Example of the Minamata Convention on Mercury

This article provides an example of interprofessional collaboration for policy development regarding environmental global health vis-à-vis the Minamata Convention on Mercury. It presents an overview of mercury and mercury-related environmental health issues; public policy processes and stakeholders; and specifics including organized dentistry's efforts to create global policy to restrict environmental contamination by mercury. Dentistry must participate in interprofessional collaborations and build on such experiences to be optimally placed for ongoing interprofessional policy development. Current areas requiring dental engagement for interprofessional policy development include education, disaster response, HPV vaccination, pain management, research priorities, and antibiotic resistance.

A novel high sensitivity UPLC-MS/MS method for the evaluation of bisphenol A leaching from dental materials

There is a growing necessity to acquire more profound knowledge on the quantity of eluates from resin-based dental materials, especially with regard to bisphenol A (BPA). The aim of the present study was to develop a highly sensitive method to characterize the short-term release of BPA in saliva with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), using an extraction step and additional derivatization of BPA with pyridine-3-sulfonyl chloride. Light-cured resin-based composites were incubated at 37 °C in 1 mL artificial saliva, which was refreshed daily for one week. The final protocol allows accurate quantification of very low levels of BPA in samples of artificial saliva (i.e. 1.10 pmol BPA/mL or 250 pg/mL). The daily BPA-release from dental composites, ranging from 1.10 to 7.46 pmol BPA/mL, was characterized over a period of 7 days. The highest total amount of BPA was released from Solitaire 2 (24.72 ± 2.86 pmol), followed by G-ænial Posterior (15.51 ± 0.88 pmol) and Filtek Supreme XTE (12.00 ± 1.31 pmol). In contrast, only trace amounts of BPA were released from Ceram.x Universal. This UPLC-MS/MS method might be used for clinical research focusing on the evaluation of the clinical relevance of BPA release from dental materials.

Chemical Contaminants in Raw and Pasteurized Human Milk

BACKGROUND

Environmental contaminants ranging from legacy chemicals like p,p'-dichlorodiphenyltrichloroethane (DDT) to emerging chemicals like phthalates are ubiquitous. Research aims/questions: This research aims to examine the presence and co-occurrence of contaminants in human milk and effects of pasteurization on human milk chemical contaminants.

METHODS

We analyzed human milk donated by 21 women to a milk bank for 23 chemicals, including the persistent organic pollutants (POPs) polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), dichlorodiphenyltrichloroethane (DDT), and dichlorodiphenyldichloroethylene (DDE) isomers that are known to sequester in adipose tissue, along with the current-use and nonpersistent pesticides chlorpyrifos and permethrin, phthalates, and bisphenol A (BPA). Human milk was analyzed raw and pasteurized for these chemicals using gas chromatography-tandem mass spectrometry for the POPs and high-performance liquid chromatography-tandem mass spectrometry for non-POPs.

RESULTS

Within the different chemical classes, PBDE47, PCB153, ppDDE, and MEHHP (phthalate metabolite) had the highest median concentrations and were observed in all samples. We also observed chlorpyrifos and BPA in all samples and permethrin in 90% of the samples tested. Only two chemicals, chlorpyrifos and permethrin, were susceptible to substantial degradation from pasteurization, a standard method for processing donated human milk.

CONCLUSION

We detected 19 of 23 chemicals in all of our prepasteurized milk and 18 of 23 chemicals in all of our pasteurized milk. Pasteurization did not affect the presence of most of the chemicals. Future research should continue to explore human milk for potential chemical contamination and as a means to surveil exposures among women and children.

Resin-based dental sealants as a source of human exposure to bisphenol analogues, bisphenol A diglycidyl ether, and its derivatives

Although studies have examined leaching of bisphenol A (BPA) from dental sealants into saliva, occurrence of BPA, bisphenol A diglycidyl ether (BADGE), and their derivatives in dental sealants themselves has not been investigated. In this study, concentrations of eight bisphenol analogues (BPs), BADGE and its derivatives (BADGEs), including BADGE‧H₂O, BADGE‧HCl, BADGE‧2H₂O, BADGE‧2HCl, and BADGE‧H₂O‧HCl, were determined in 70 dental sealants collected from the U.S. market. Of the 70 dental sealants analyzed, 65 contained at least one of the target chemicals measured. BADGE‧2H₂O was the most abundant compound, found at concentrations of up to 1780µg/g. The geometric mean (GM) concentration of total BADGEs was 47.8µg/g, which was two to three orders of magnitude higher than that of total BPs (GM: 539ng/g). BPA was found in 46% of the sealants and BADGEs was found in 87% of the sealants analyzed. Majority of the dental sealants analyzed in this study were manufactured in the United States and Korea; no significant differences were observed in the concentrations of BPs and BADGEs between the two countries. An exposure assessment was made based on the concentrations of BPs and BADGEs measured in sealants and their application rates in dentistry. The worst-case exposure scenario with the highest measured concentration of total BPs and BADGEs and application on 8 teeth at 8mg each yielded an estimated daily intake (EDI) of 1670 and 5850ng/kg·bw/day for adults and children, respectively. Although the EDI is below the specific migration limit set by the European Food Safety Authority, dental sealants are a source of exposure to BPs and BADGEs, especially in children.

Relationship between bisphenol A exposure and attention-deficit/ hyperactivity disorder: A case-control study for primary school children in Guangzhou, China

Bisphenol A (BPA) is an endocrine-disrupting chemical. Studies have shown that the exposure to BPA is associated with attention-deficit/hyperactivity disorder (ADHD) during adolescent development. However the direct clinical evidence is limited. To investigate the possible association between environmental BPA exposure and the altered behavior of children, a case-control study was conducted with children aged 6-12 years in Guangzhou, China. Two hundred fifteen children diagnosed with ADHD and 253 healthy children from Guangzhou were recruited as the case and control groups, respectively. Urinary BPA and 8-hydroxy-2'-deoxyguanosine (8-OHdG, a biomarker of oxidative DNA damage) concentrations were determined by high-performance liquid chromatography/tandem spectrometry. The results showed that concentrations of urinary BPA for the case group were significantly higher than those for the control group (3.44 vs 1.70 μg/L; 4.63 vs 1.71 μg/g Crt. p < .001). A stepwise increase in the odds ratios for ADHD was observed with the increasing quartiles of children's urinary BPA (first quartile: reference category; second quartile adjusted OR: 1.79, 95% CI: 0.95-3.37; third quartile adjusted OR: 7.44, 95% CI: 3.91-14.1; fourth quartile adjusted OR: 9.41, 95% CI: 4.91-18.1). When the BPA levels were stratified by gender, the odds of ADHD among boys and girls increased significantly with urinary BPA concentrations (adjusted OR: 4.58, 95% CI: 2.84-7.37; adjusted OR: 2.83, 95% CI: 1.17-6.84). Urinary 8-OHdG concentrations in the ADHD children were significantly higher than those in the control group. Furthermore, the linear regression analysis results indicated that a significant relationship existed between BPA exposure and 8-OHdG levels (R = 0.257, p < .001). Our findings provide direct evidence that childhood BPA exposure may be related to ADHD and 8-OHdG concentrations for children. Moreover, BPA exposure could increase the higher occurrence of ADHD for boy than for girls.

Monomer release from orthodontic retentions: An in vitro study

INTRODUCTION

The adhesives used to bond orthodontic retentions are low-loaded composite resins with a resinous matrix containing bisphenol A diglycidyl ether dimethacrylate synthesized from bisphenol A (BPA), fluidizers such as triethylene glycol dimethacrylate (TEGDMA) and hydrophilic polymers such as hydroxyethylmethacrylate. BPA disrupts the endocrine balance, and TEGDMA has high risks for human health: eg, allergies and cytotoxicity. The aim of this study was to evaluate in vitro the release of monomers from orthodontic bonded retentions.

METHODS

A reproducible model of bonded retentions was carried out using calibrated molds. We analyzed the release of monomers by gas phase chromatography coupled with mass spectrometry.

RESULTS

This model allowed us to qualitatively and quantitatively evaluate the in-vitro release of monomers from orthodontic adhesives. The quantitative and qualitative analyses showed no BPA release above the 0.02 ppm detection limit. A greater release of TEGDMA was observed with Transbond LR (31.7 μg/mL) than with Transbond XT (13.12 μg/mL) (both, 3M Unitek, Monrovia, Calif). Other toxic components (iodobenzene, iodobiphenyl, triphenyl stibine, and so on) were also identified.

CONCLUSIONS

Toxic and carcinogenic molecules not mentioned in the material safety data sheets were identified.

Bisphenol A (BPA) the mighty and the mutagenic

Bisphenol A (BPA) is one of the most widely used synthetic compounds on the planet. Upon entering the diet, its highest concentration (1-104 ng/g of tissue) has been recorded in the placenta and fetus. This accumulation of BPA can have many health hazards ranging from the easy to repair single strand DNA breaks (SSBs) to error prone double strand DNA breaks (DSBs). Although the Human liver can efficiently metabolize BPA via glucuronidation and sulfation pathways, however the by-product Bisphenol-o-quinone has been shown to act as a DNA adduct. Low doses of BPA have also been shown to interact with various signaling pathways to disrupt normal downstream signaling. Analysis has been made on how BPA could interact with several signaling pathways such as NFκB, JNK, MAPK, ER and AR that eventually lead to disease morphology and even tumorigenesis. The role of low dose BPA is also discussed in dysregulating Ca2+ homeostasis of the cell by inhibiting calcium channels such as SPCA1/2 to suggest a new direction for future research in the realms of BPA induced disease morphology and mutagenicity.

The role of polycarbonate monomer bisphenol-A in insulin resistance

Bisphenol A (BPA) is a synthetic unit of polycarbonate polymers and epoxy resins, the types of plastics that could be found in essentially every human population and incorporated into almost every aspect of the modern human society. BPA polymers appear in a wide range of products, from liquid storages (plastic bottles, can and glass linings, water pipes and tanks) and food storages (plastics wraps and containers), to medical and dental devices. BPA polymers could be hydrolyzed spontaneously or in a photo- or temperature-catalyzed process, providing widespread environmental distribution and chronic exposure to the BPA monomer in contemporary human populations. Bisphenol A is also a xenoestrogen, an endocrine-disrupting chemical (EDC) that interferes with the endocrine system mimicking the effects of an estrogen and could potentially keep our endocrine system in a constant perturbation that parallels endocrine disruption arising during pregnancy, such as insulin resistance (IR). Gestational insulin resistance represents a natural biological phenomenon of higher insulin resistance in peripheral tissues of the pregnant females, when nutrients are increasingly being directed to the embryo instead of being stored in peripheral tissues. Gestational diabetes mellitus may appear in healthy non-diabetic females, due to gestational insulin resistance that leads to increased blood sugar levels and hyperinsulinemia (increased insulin production from the pancreatic beta cells). The hypothesis states that unnoticed and constant exposure to this environmental chemical might potentially lead to the formation of chronic low-level endocrine disruptive state that resembles gestational insulin resistance, which might contribute to the development of diabetes. The increasing body of evidence supports the major premises of this hypothesis, as exemplified by the numerous publications examining the association of BPA and insulin resistance, both epidemiological and mechanistic. However, to what extent BPA might contribute to the development of diabetes in the modern societies still remains unknown. In this review, I discuss the chemical properties of BPA and the sources of BPA contamination found in the environment and in human tissues. I provide an overview of mechanisms for the proposed role of bisphenol A in insulin resistance and diabetes, as well as other related diseases, such as cardiovascular diseases. I describe the transmission of BPA effects to the offspring and postulate that gender related differences might originate from differences in liver enzyme levels, such as UDP-glucuronosyltransferase, which is involved in BPA processing and its elimination from the organism. I discuss the molecular mechanisms of BPA action through nuclear and membrane-bound ER receptors, non-monotonic dose response, epigenetic modifications of the DNA and propose that chronic exposure to weak binders, such as BPA, may mimic the effects of strong binders, such as estrogens.

Pit and fissure sealants for preventing dental decay in permanent teeth

BACKGROUND

Dental sealants were introduced in the 1960s to help prevent dental caries, mainly in the pits and fissures of occlusal tooth surfaces. Sealants act to prevent bacteria growth that can lead to dental decay. Evidence suggests that fissure sealants are effective in preventing caries in children and adolescents compared to no sealants. Effectiveness may, however, be related to caries incidence level of the population. This is an update of a review published in 2004, 2008 and 2013.

OBJECTIVES

To compare the effects of different types of fissure sealants in preventing caries in occlusal surfaces of permanent teeth in children and adolescents.

SEARCH METHODS

Cochrane Oral Health's Information Specialist searched: Cochrane Oral Health's Trials Register (to 3 August 2016), the Cochrane Central Register of Controlled Trials (CENTRAL) (the Cochrane Library, 2016, Issue 7), MEDLINE Ovid (1946 to 3 August 2016), and Embase Ovid (1980 to 3 August 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials to 3 August 2016. No restrictions were placed on language or date of publication.

SELECTION CRITERIA

Randomised controlled trials (RCTs) comparing sealants with no sealant or a different type of sealant material for preventing caries of occlusal surfaces of premolar or molar teeth in children and adolescents aged up to 20 years. Studies required at least 12 months follow-up. We excluded studies that compared compomers to resins/composites.

DATA COLLECTION AND ANALYSIS

Two review authors independently screened search results, extracted data and assessed risk of bias of included studies. We presented outcomes for caries or no caries on occlusal surfaces of permanent molar teeth as odds ratio (OR) or risk ratio (RR). We used mean difference (MD) for mean caries increment. All measures were presented with 95% confidence intervals (CI). We conducted meta-analyses using a random-effects model for comparisons where there were more than three trials; otherwise we used the fixed-effect model. We used GRADE methods to assess evidence quality.

MAIN RESULTS

We included 38 trials that involved a total of 7924 children; seven trials were new for this update (1693 participants). Fifteen trials evaluated the effects of resin-based sealant versus no sealant (3620 participants in 14 studies plus 575 tooth pairs in one study); three trials with evaluated glass ionomer sealant versus no sealant (905 participants); and 24 trials evaluated one type of sealant versus another (4146 participants). Children were aged from 5 to 16 years. Trials rarely reported background exposure to fluoride of trial participants or baseline caries prevalence. Resin-based sealant versus no sealant: second-, third- and fourth-generation resin-based sealants prevented caries in first permanent molars in children aged 5 to 10 years (at 24 months follow-up: OR 0.12, 95% CI 0.08 to 0.19, 7 trials (5 published in the 1970s; 2 in the 2010s), 1548 children randomised, 1322 children evaluated; moderate-quality evidence). If we were to assume that 16% of the control tooth surfaces were decayed during 24 months of follow-up (160 carious teeth per 1000), then applying a resin-based sealant would reduce the proportion of carious surfaces to 5.2% (95% CI 3.13% to 7.37%). Similarly, assuming that 40% of control tooth surfaces were decayed (400 carious teeth per 1000), then applying a resin-based sealant would reduce the proportion of carious surfaces to 6.25% (95% CI 3.84% to 9.63%). If 70% of control tooth surfaces were decayed, there would be 19% decayed surfaces in the sealant group (95% CI 12.3% to 27.2%). This caries-preventive effect was maintained at longer follow-up but evidence quality and quantity was reduced (e.g. at 48 to 54 months of follow-up: OR 0.21, 95% CI 0.16 to 0.28, 4 trials, 482 children evaluated; RR 0.24, 95% CI 0.12 to 0.45, 203 children evaluated). Although studies were generally well conducted, we assessed blinding of outcome assessment for caries at high risk of bias for all trials (blinding of outcome assessment is not possible in sealant studies because outcome assessors can see and identify sealant). Glass ionomer sealant versus no sealant: was evaluated by three studies. Results at 24 months were inconclusive (very low-quality evidence). One sealant versus another sealant: the relative effectiveness of different types of sealants is unknown (very low-quality evidence). We included 24 trials that directly compared two different sealant materials. Comparisons varied in terms of types of sealant assessed, outcome measures chosen and duration of follow-up. Adverse events: only four trials assessed adverse events. No adverse events were reported.

AUTHORS' CONCLUSIONS

Resin-based sealants applied on occlusal surfaces of permanent molars are effective for preventing caries in children and adolescents. Our review found moderate-quality evidence that resin-based sealants reduced caries by between 11% and 51% compared to no sealant, when measured at 24 months. Similar benefit was seen at timepoints up to 48 months; after longer follow-up, the quantity and quality of evidence was reduced. There was insufficient evidence to judge the effectiveness of glass ionomer sealant or the relative effectiveness of different types of sealants. Information on adverse effects was limited but none occurred where this was reported. Further research with long follow-up is needed.