Phyto-Engineered Gold Nanoparticles (AuNPs) with Potential Antibacterial, Antioxidant, and Wound Healing Activities Under in vitro and in vivo Conditions

Shining insights: Deciphering the biogenic synthesis of Ajuga bracteosa-mediated gold nanoparticles with advanced microscopy techniques

In this study, gold nanoparticles (AuNPs) were bioreduced from Ajuga bracteosa, a medicinal herb known for its therapeutic properties against various diseases. Different fractions of the plant extract were used, including the methanolic fraction (ABMF), the n-hexane fraction (ABHF), the chloroform fraction (ABCF), and the aqueous extract for AuNPs synthesis. The characterization of AuNPs was performed using UV-Vis spectrophotometry, FT-IR, XRD, EDX, and TEM. UV-Vis spectroscopy confirmed the formation of AuNPs, with peaks observed at 555 nm. FT-IR analysis indicated strong capping of phytochemicals on the surface of AuNPs, which was supported by higher total phenolic contents (TPC) and total flavonoid contents (TFC) in AuNPs. XRD results showed high crystallinity and a smaller size distribution of AuNPs. TEM analysis revealed the spherical shape of AuNPs, with an average size of 29 ± 10 nm. The biologically synthesized AuNPs exhibited superior antibacterial, antioxidant, and cytotoxic activities compared to the plant extract fractions. The presence of active biomolecules in A. bracteosa, such as neoclerodan flavonol glycosides, diterpenoids, phytoecdysone, and iridoid glycosides, contributed to the enhanced biological activities of AuNPs. Overall, this research highlights the potential of A. bracteosa-derived AuNPs for various biomedical applications due to their remarkable therapeutic properties and effective capping by phytochemicals. RESEARCH HIGHLIGHTS: This research underscores the growing significance of herbal medicine in contemporary healthcare by exploring the therapeutic potential of Ajuga bracteosa and gold nanoparticles (AuNPs). The study highlights the notable efficacy of A. bracteosa leaf extracts and AuNPs in treating bacterial infections, demonstrating their bactericidal effects on a range of strains. The anti-inflammatory properties of plant extracts and nanoparticles are evidenced through paw edema method suggesting their applicability in managing inflammatory conditions. These findings position A. bracteosa and AuNPs as potential candidates for alternative and effective approaches to modern medication.

Recent Advances in Nanomedicine for Ocular Fundus Neovascularization Disease Management

As an indispensable part of the human sensory system, visual acuity may be impaired and even develop into irreversible blindness due to various ocular pathologies. Among ocular diseases, fundus neovascularization diseases (FNDs) are prominent etiologies of visual impairment worldwide. Intravitreal injection of anti-vascular endothelial growth factor drugs remains the primary therapy but is hurdled by common complications and incomplete potency. To renovate the current therapeutic modalities, nanomedicine emerged as the times required, which is endowed with advanced capabilities, able to fulfill the effective ocular fundus drug delivery and achieve precise drug release control, thus further improving the therapeutic effect. This review provides a comprehensive summary of advances in nanomedicine for FND management from state-of-the-art studies. First, the current therapeutic modalities for FNDs are thoroughly introduced, focusing on the key challenges of ocular fundus drug delivery. Second, nanocarriers are comprehensively reviewed for ocular posterior drug delivery based on the nanostructures: polymer-based nanocarriers, lipid-based nanocarriers, and inorganic nanoparticles. Thirdly, the characteristics of the fundus microenvironment, their pathological changes during FNDs, and corresponding strategies for constructing smart nanocarriers are elaborated. Furthermore, the challenges and prospects of nanomedicine for FND management are thoroughly discussed.

Green synthesis of gold nanoparticles via Moringa oleifera seed extract: antioxidant, antibacterial and anticarcinogenic activity on lung cancer

Plant-mediated biosynthesis of nanoparticles is a green method that allows synthesis in one-pot process. Synthesis of gold nanoparticles with plant extracts has gained interest in the field of biomedicine due to its variety of applications. This study presents the synthesis via green chemistry of gold nanoparticles (AuNPs) using the methanol extract of Moringa oleifera seeds. The AuNPs were synthesized at room temperature. UV-Vis spectroscopy confirmed the formation of AuNPs by identifying the surface plasmon resonance located at 546 nm. TEM analysis shows spherical nanoparticles. FTIR analysis demonstrated the presence of specific bioactive molecules responsible for the Au3+ ion reduction process. The antioxidant activity of the nanoparticles was evaluated on the stabilization of the DPPH radical (1,1-diphenyl-2-picrylhydrazyl, 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl). The antimicrobial activity analysis was developed by broth microdilution method at different concentrations against Escherichia coli and Staphylococcus aureus. Minimum inhibitory concentration were 400 µg/mL and 200 µg/mL, respectively. A549 lung cancer cell proliferation was measured according to the MTT protocol, indicating a dose-dependent response and a IC50 of 163.9 ± 13.27 µg/mL. The AuNPs synthesized using M. oleifera seeds showed promise as active materials for antimicrobial or anticancer products.

Heavy metal accumulation in root and shoot tapioca plant biomass grown in agriculture land situated around the magnesite mine tailings

Heavy metal pollution in soil has emerged as a major environmental concern. This can be attributed to human activities such as mining, modern agriculture, and industrialization. This study was conducted to determine how heavy metals spread from mine tailings to surrounding farmland. Metal absorption and accumulation were also investigated in the root and shoot biomass of tapioca crops grown in those farmlands. Metal concentrations in MTAS1 were 85.3 ± 1.2, 45.8 ± 1.5, 134.8 ± 1.7, 92.4 ± 2.2, and 78.95 ± 1.4 mg kg-1, respectively. Heavy metal concentrations in MTAS2 and MTAS3 were found to be 79.62 ± 1.6, 75.4 ± 1.5, 41.31 ± 1.1, 47.8 ± 1.6, 142.5 ± 2.1, 128.4 ± 1.4, 86.2 ± 1.9, 79.5 ± 1.3, and 83.4 ± 1.2 mg kg-1, respectively. Tapioca crop shoot and root biomass grown at these metal polluted sites absorbed and accumulated significant amounts of Cd, Cu, Zn, Pb, Ni, and Mn. Notably, the metal content of the tapioca crop's root and shoot biomass exceeded national standards.

Identification of acetaldehyde based on plasmonic patterns of a gold nanostructure conjugated with chromophore and H2O2: a new platform for the rapid and low-cost analysis of carcinogenic agents by colorimetric affordable test strip (CATS)

Acetaldehyde, a prevalent carbonyl compound in fermented foods, poses challenges in various applications due to its reactivity. This study addresses the need for efficient acetaldehyde detection methods across biotechnological, environmental, pharmaceutical, and food sectors. Herein, we present a novel colorimetric/UV spectrophotometric approach utilizing gold nanoparticles (AuNPs), particularly gold nano-flowers (AuNFs), for sensitive acetaldehyde identification. The method exhibits a notable sensitivity, detecting acetaldehyde at concentrations as low as 0.1 μM. The mechanism involves the interaction of acetaldehyde molecules with AuNFs, leading to a significant change in the absorbance spectrum, which serves as the basis for detection. Moreover, its applicability extends to human biofluids, notably urine samples. Integration with a cost-effective one-drop microfluidic colorimetric device (OD-μPCD) enables the development of an affordable test strip (CATS). This semi-analytical device, employing a multichannel OD-μPCD, facilitates real-time analysis of acetaldehyde in human samples. Our findings demonstrate the pioneering utilization of AuNPs for selective and sensitive acetaldehyde detection, promising advancements in environmental and occupational safety standards, and laying a foundation for enhanced detection and monitoring of related volatile organic compounds (VOCs).

Sustainable Utilization of Food Biowaste (Papaya Peel) Extract for Gold Nanoparticle Biosynthesis and Investigation of Its Multi-Functional Potentials

Papaya contains high amounts of vitamins A, C, riboflavin, thiamine, niacin, ascorbic acid, potassium, and carotenoids. It is confirmed by several studies that all food waste parts such as the fruit peels, seeds, and leaves of papaya are potential sources of phenolic compounds, particularly in the peel. Considering the presence of numerous bioactive compounds in papaya fruit peels, the current study reports a rapid, cheap, and environmentally friendly method for the production of gold nanoparticles (AuNPs) employing food biowaste (vegetable papaya peel extract (VPPE)) and investigated its antioxidant, antidiabetic, tyrosinase inhibition, anti-inflammatory, antibacterial, and photocatalytic degradation potentials. The phytochemical analysis gave positive results for tannins, saponins, steroids, cardiac steroidal glycoside, protein, and carbohydrates. The manufactured VPPE-AuNPs were studied by UV-Vis scan (with surface plasmon resonance of 552 nm), X-ray diffraction analysis (XRD) (with average crystallite size of 44.41 nm as per the Scherrer equation), scanning electron microscopy-energy-dispersive X-ray (SEM-EDS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), particle size, zeta potential, etc. The mean dimension of the manufactured VPPE-AuNPs is 112.2 d.nm (PDI-0.149) with a -26.1 mV zeta potential. The VPPE-AuNPs displayed a significant antioxidant effect (93.24% DPPH scavenging and 74.23% SOD inhibition at 100 µg/mL); moderate tyrosinase effect (with 30.76%); and substantial α-glucosidase (95.63%) and α-amylase effect (50.66%) at 100 µg/mL. Additionally, it was found to be very proficient in the removal of harmful methyl orange and methylene blue dyes with degradation of 34.70% at 3 h and 24.39% at 5 h, respectively. Taken altogether, the VPPE-AuNPs have been proven to possess multiple biopotential activities, which can be explored by the food, cosmetics, and biomedical industries.

Effective antibacterial agents in modern wound dressings: a review

Wound infections are a significant concern in healthcare, leading to long healing times. Traditional approaches for managing wound infections rely heavily on systemic antibiotics, which are associated with the emergence of antibiotic-resistant bacteria. Therefore, the development of alternative antibacterial materials for wound care has gained considerable attention. In today's world, new generations of wound dressing are commonly used to heal wounds. These new dressings keep the wound and the area around it moist to improve wound healing. However, this moist environment can also foster an environment that is favorable for the growth of bacteria. Excessive antibiotic use poses a significant threat to human health and causes bacterial resistance, so new-generation wound dressings must be designed and developed to reduce the risk of infection. Wound dressings using antimicrobial compounds minimize wound bacterial colonization, making them the best way to avoid open wound infection. We aim to provide readers with a comprehensive understanding of the latest advancements in antibacterial materials for wound management.

Romanian Wild-Growing Chelidonium majus-An Emerging Approach to a Potential Antimicrobial Engineering Carrier System Based on AuNPs: In Vitro Investigation and Evaluation

Novel nanotechnology based on herbal products aspires to be a high-performing therapeutic platform. This study reports the development of an original engineering carrier system that jointly combines the pharmacological action of Chelidonium majus and AuNPs, with unique properties that ensure that the limitations imposed by low stability, toxicity, absorption, and targeted and prolonged release can be overcome. The metabolite profile of Romanian wild-grown Chelidonium majus contains a total of seventy-four phytochemicals belonging to eight secondary metabolite categories, including alkaloids, amino acids, phenolic acids, flavonoids, carotenoids, fatty acids, sterols, and miscellaneous others. In this study, various techniques (XRD, FTIR, SEM, DLS, and TG/DTG) were employed to investigate his new carrier system's morpho-structural and thermal properties. In vitro assays were conducted to evaluate the antioxidant potential and release profile. The results indicate 99.9% and 94.4% dissolution at different pH values for the CG-AuNPs carrier system and 93.5% and 85.26% for greater celandine at pH 4 and pH 7, respectively. Additionally, three in vitro antioxidant assays indicated an increase in antioxidant potential (flavonoid content 3.8%; FRAP assay 24.6%; and DPPH 24.4%) of the CG-AuNPs carrier system compared to the herb sample. The collective results reflect the system's promising perspective as a new efficient antimicrobial and anti-inflammatory candidate with versatile applications, ranging from target delivery systems, oral inflammation (periodontitis), and anti-age cosmetics to extending the shelf lives of products in the food industry.

Detection of DNA using gold nanoparticle-coated silica nanoparticles

We report a sensitive lateral flow assay (LFA) in which the assay colour change originated from reporter labels constructed from silica spheres (radius = 450 nm) coated with approximately 3.9 × 103 gold nanoparticles (radius = 8.5 nm). These reporter labels were modified with DNA and deposited in the conjugation area of an LFA device assembled on wax-patterned Fusion 5 paper. Test and control zones of the device were pre-loaded with capture probe formed by avidin-coated mesoporous silica nanoparticles attached with biotin-tagged DNA sequences. Proof-of-concept was demonstrated by the detection of a partial sequence of the actin gene of Colletotrichum truncatum. The DNA target could be detected with an LOD of 46 pM, which was 5 times lower than a comparative assay using gold nanoparticles alone. The assay showed good selectivity against the Colletotrichum species C. scovillei and C. gloeosporioides, as well as against DNA from the fungal genera Aspergillus niger and Alternaria alternata. There was negligible change in sensor response over storage for one month at room temperature. The LFA was used to detect PCR products following extraction from mycelium.

Streptomyces monashensis MSK03-mediated synthesis of gold nanoparticles: characterization and antibacterial activity

Nanotechnology is a cutting-edge field with diverse applications, particularly in the utilization of gold nanoparticles (AuNPs) due to their stability and biocompatibility. AuNPs serve as pivotal components in medical applications, with a specific emphasis on their significant antibacterial efficacy. This study focuses on synthesizing AuNPs using the cell-free supernatant of Streptomyces monashensis MSK03, isolated from terrestrial soil in Thailand. The biosynthesis process involved utilizing the cell-free supernatant of S. monashensis MSK03 and hydrogen tetrachloroauric acid (HAuCl4) under controlled conditions of 37 °C and 200 rpm agitation. Characterization studies revealed spherical AuNPs with sizes ranging from 7.1 to 40.0 nm (average size: 23.2 ± 10.7 nm), as confirmed by TEM. UV-Vis spectroscopy indicated a localized surface plasmon resonance (LSPR) band at 545 nm, while XRD analysis confirmed a crystalline structure with characteristics of cubic lattice surfaces. The capping molecules on the surface of AuNPs carry a negative charge, indicated by a Zeta potential of -26.35 mV, and FTIR analysis identified functional groups involved in reduction and stabilization. XANES spectra further confirmed the successful reduction of Au3+ to Au0. Moreover, the synthesized AuNPs demonstrated antibacterial activity against drug-resistant strains of Pseudomonas aeruginosa and Acinetobacter baumannii. Interestingly, the AuNPs showed non-toxicity to Vero cell lines. These significant antibacterial properties of the produced nanoparticles mean they hold great promise as new antimicrobial treatments for tackling the increasing issue of antibiotic resistance.

Metal Nanoparticles: Advanced and Promising Technology in Diabetic Wound Therapy

Diabetic wounds pose a significant challenge to public health, primarily due to insufficient blood vessel supply, bacterial infection, excessive oxidative stress, and impaired antioxidant defenses. The aforementioned condition not only places a significant physical burden on patients' prognosis, but also amplifies the economic strain on the medical system in treating diabetic wounds. Currently, the effectiveness of available treatments for diabetic wounds is limited. However, there is hope in the potential of metal nanoparticles (MNPs) to address these issues. MNPs exhibit excellent anti-inflammatory, antioxidant, antibacterial and pro-angiogenic properties, making them a promising solution for diabetic wounds. In addition, MNPs stimulate the expression of proteins that promote wound healing and serve as drug delivery systems for small-molecule drugs. By combining MNPs with other biomaterials such as hydrogels and chitosan, novel dressings can be developed and revolutionize the treatment of diabetic wounds. The present article provides a comprehensive overview of the research progress on the utilization of MNPs for treating diabetic wounds. Building upon this foundation, we summarize the underlying mechanisms involved in diabetic wound healing and discuss the potential application of MNPs as biomaterials for drug delivery. Furthermore, we provide an extensive analysis and discussion on the clinical implementation of dressings, while also highlighting future prospects for utilizing MNPs in diabetic wound management. In conclusion, MNPs represent a promising strategy for the treatment of diabetic wound healing. Future directions include combining other biological nanomaterials to synthesize new biological dressings or utilizing the other physicochemical properties of MNPs to promote wound healing. Synthetic biomaterials that contain MNPs not only play a role in all stages of diabetic wound healing, but also provide a stable physiological environment for the wound-healing process.

Cytotoxic, antioxidant, and antiglycation activities, and tyrosinase inhibition using silver nanoparticles synthesized by leaf extract of Solanum aculeatissimum Jacq

The present study aimed to determine the biological properties of an extract of Solanum aculeatissimum aqueous extract (SaCE) alone as well as silver nanoparticles (AgNPs) generated by green synthesis utilizing S. aculeatissimum aqueous extract (SaCE). These synthesized SaCE AgNPs were characterized using UV-VIS spectrophotometry, scanning transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), zeta potential (ZP), dynamic light scattering (DLS). Determination of total polyphenols, flavonoids, saponins content was conducted. In addition, high performance liquid chromatography-mass spectrometry (HPLC-MS) was employed to identify constituents in this extract. Antioxidant activity was determined by DPPH radical scavenging and ferric ion reducing power (FRAP) methods. Antiglycation activity was demonstrated through relative mobility in electrophoresis (RME) and determination of free amino groups. The inhibitory activity on tyrosinase was also examined. Molecular docking analyses were performed to assess the molecular interactions with DNA and tyrosinase. The antitumor activity SaCE was also measured. Phytochemical analysis of SaCE and AgNPs showed presence polyphenols (1000.41 and 293.37 mg gallic acid equivalent/g), flavonoids (954.87 and 479.87 mg rutin equivalent/g), saponins (37.89 and 23.01% total saponins), in particular steroidal saponins (aculeatiside A and B). Both SaCE and AgNPs exhibited significant antioxidant (respectively, 73.97%, 56.27% in DPPH test, 874.67 and 837.67 μM Trolox Equivalent/g in FRAP test) and antiglycation activities (72.81 and 67.98% free amino groups, results observed in RME). SaCE and AgNPs presented 33.2, 36.1% inhibitory activity on tyrosinase, respectively. In silico assay demonstrated interaction between steroidal saponins, DNA or tyrosinase. SaCE exhibited antitumor action against various human tumor cells. Data demonstrated that extracts SaCE alone and AgNPs synthesized from SaCE presented biological properties of interest for application in new therapeutic formulations in medicine.

Enhancing angiogenesis: Innovative drug delivery systems to facilitate diabetic wound healing

Diabetic wounds (DW) constitute a substantial burden on global healthcare owing to their widespread occurrence as a complication of diabetes. Angiogenesis, a crucial process, plays a pivotal role in tissue recovery by supplying essential oxygen and nutrients to the injury site. Unfortunately, in diabetes mellitus, various factors disrupt angiogenesis, hindering wound healing. While biomaterials designed to enhance angiogenesis hold promise for the treatment of DWs, there is an urgent need for more in-depth investigations to fully unlock their potential in clinical management. In this review, we explore the intricate mechanisms of angiogenesis that are crucial for DW recovery. We introduce a rational design for angiogenesis-enhancing drug delivery systems (DDS) and provide a comprehensive summary and discussion of diverse biomaterials that enhance angiogenesis for facilitating DW healing. Lastly, we address emerging challenges and prospects in angiogenesis-enhancing DDS for facilitating DW healing, aiming to offer a comprehensive understanding of this critical healthcare issue and potential solutions.

PMN-incorporated multifunctional chitosan hydrogel for postoperative synergistic photothermal melanoma therapy and skin regeneration

Melanoma excision surgery is usually accompanied by neoplasm residual, tissue defect, and bacterial infection, resulting in high tumor recurrence and chronic wound. Nanocomposite hydrogels can satisfy the twin requirements of avoiding tumor recurrence and skin wound healing following skin melanoma surgery due to their photothermal anti-tumor and anti-bacterial activities. In this study, carboxymethyl chitosan, oxidized fucoidan and polyphenol-metal nanoparticle (PMN) of tannic acid capped gold nanoparticles were used to fabricate multifunctional nanocomposite hydrogels through Schiff base reaction. The prepared hydrogel demonstrated outstanding photothermal effect, and the controlled high temperature will rapidly kill melanoma cells as well as bacteria within 10 min. Good injectability, self-healing and adhesion combined with high reactive oxygen species (ROS) scavenging capacity, hemostasis and biocompatibility made this hydrogel platform perfect for the postoperative treatment of melanoma and promoting wound healing. With the assistance of NIR irradiance, hydrogel can inhibit tumor tissue proliferation and promote tumor cell apoptosis, thereby helping to prevent melanoma recurrence after surgical removal of tumors. Simultaneously, the irradiance heat and polyphenol component kill bacteria on the wound surface, eliminate ROS, inhibit inflammatory responses, and promote angiogenesis, collagen deposition, and skin regeneration, all of which help to speed up wound healing.

Electrospun Nanofiber Scaffolds Loaded with Metal-Based Nanoparticles for Wound Healing

Failures of wound healing have been a focus of research worldwide. With the continuous development of materials science, electrospun nanofiber scaffolds loaded with metal-based nanoparticles provide new ideas and methods for research into new tissue engineering materials due to their excellent antibacterial, anti-inflammatory, and wound healing abilities. In this review, the stages of extracellular matrix and wound healing, electrospun nanofiber scaffolds, metal-based nanoparticles, and metal-based nanoparticles supported by electrospun nanofiber scaffolds are reviewed, and their characteristics and applications are introduced. We discuss in detail the current research on wound healing of metal-based nanoparticles and electrospun nanofiber scaffolds loaded with metal-based nanoparticles, and we highlight the potential mechanisms and promising applications of these scaffolds for promoting wound healing.

Antimicrobial and anti-biofilm activities of bio-inspired nanomaterials for wound healing applications

Chronic wounds are ubiquitously inhabited by bacteria, and they remain a challenge as they cause significant discomfort and because their treatment consumes huge clinical resources. To reduce the burden that chronic wounds place upon both patients and health services, a wide variety of approaches have been devised and investigated. Bioinspired nanomaterials have shown great success in wound healing when compared to existing approaches, showing better ability to mimic natural extracellular matrix (ECM) components and thus to promote cell adhesion, proliferation, and differentiation. Wound dressings that are based on bioinspired nanomaterials can be engineered to promote anti-inflammatory mechanisms and to inhibit the formation of microbial biofilms. We consider the extensive potential of bioinspired nanomaterials in wound healing, revealing a scope beyond that covered previously.

Bacterial Membrane Vesicles: Physiological Roles, Infection Immunology, and Applications

Bacterial or fungal membrane vesicles, traditionally considered as microbial metabolic wastes, are secreted mainly from the outer membrane or cell membrane of microorganisms. However, recent studies have shown that these vesicles play essential roles in direct or indirect communications among microorganisms and between microorganisms and hosts. This review aims to provide an updated understanding of the physiological functions and emerging applications of bacterial membrane vesicles, with a focus on their biogenesis, mechanisms of adsorption and invasion into host cells, immune stimulatory effects, and roles in the much-concerned problem of bacterial resistance. Additionally, the potential applications of these vesicles as biomarkers, vaccine candidates, and drug delivery platforms are discussed.

Ceftazidime-Decorated Gold Nanoparticles: a Promising Strategy against Clinical Ceftazidime-Avibactam-Resistant Enterobacteriaceae with Different Resistance Mechanisms

Nanoparticle-based antibiotic delivery systems are essential in combating antibiotic-resistant bacterial infections arising from acquired resistance and/or biofilm formation. Here, we report that the ceftazidime-decorated gold nanoparticles (CAZ_Au NPs) can effectively kill clinical ceftazidime-avibactam-resistant Enterobacteriaceae with various resistance mechanisms. Further study of underlying antibacterial mechanisms suggests that CAZ_Au NPs can damage the bacterial cell membrane and increase the level of intracellular reactive oxygen species. Moreover, CAZ_Au NPs show great potential in inhibiting biofilm formation and eradicating mature biofilms via crystal violet and scanning electron microscope assays. In addition, CAZ_Au NPs demonstrate excellent performance in improving the survival rate in the mouse model of abdominal infection. In addition, CAZ_Au NPs show no significant toxicity at bactericidal concentrations in the cell viability assay. Thus, this strategy provides a simple way to drastically improve the potency of ceftazidime as an antibiotic and its use in further biomedical applications.

Sericin mediated gold/silver bimetallic nanoparticles and exploration of its multi-therapeutic efficiency and photocatalytic degradation potential

The current investigation aimed at bimetallic gold-silver nanoparticles (Au/Ag NPs), here called BM-GS NPs, synthesis using sericin protein as the reducing agent in an easy, cost-effective, and sustainable way. The obtained BM-GS NPs were characterized by UV-Visible spectroscopy, Transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDS), atomic force microscopy (AFM), Dynamic light scattering (DLS) and Zeta potential, X-ray Powder Diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and Thermogravimetric analysis followed by evaluation of its multitherapeutic and photocatalytic degradation potentials. The TEM analysis revealed its spherical nature and the EDS result displayed the presence of both Ag and Au elements, confirming the synthesis of BM-GS NPs. The XRD pattern verified the crystalline nature of the nanoparticles (NPs). The DLS analysis showed an average size of 86.08 d nm and the zeta potential showed a highly negative value (-26.3 mV) which specifies that the generated bimetallic NPs are stable. The BM-GS NPs exhibited positive wound healing potential (with 63.38% of wound closure rate at 25 μg/ml, as compared to 54.42% by the untreated control) with very negligible toxicity effect on the cell viability of the normal keratinocyte cells. It also demonstrated promising antioxidant properties with 65.00%, 69.23%, and 63.03% activity at 100 μg/ml concentration for ABTS (2, 2-azinobis) (3-ethylbenzothiazoline-6-sulfonic acid)), DPPH (1, 1 diphenyl-2-picrylhydrazyl) and SOD (superoxide dismutase enzyme) assays respectively, antidiabetic potential (with a significantly high α-glucosidase inhibition potential of 99.69% at 10μg/ml concentration and 62.11% of α-amylase enzyme inhibition at 100 μg/ml concentration) and moderate tyrosinase inhibitory potential (with 17.09% at 100 μg/ml concentration). Besides, it displayed reasonable antibacterial potential with the diameter of zone of inhibition ranging between 10.89 and 12.39 mm. Further, its antibacterial mode of action reveals that its effects could be due to being very smaller, the NPs could have penetrated inside the cellular membrane thereby causing rupture and damage to the interior materials leading to cellular lysis. The photocatalytic evaluation showed that synthesized BM-GS NPs have the efficiency of degrading methylene blue dye by 34.70% within 3 h of treatment. The above findings revealed the multi-therapeutic efficacy of the sericin globular protein-mediated BM-GS NPs and its potential future applications in the cosmetics and food sector and environmental contamination management industries.

Nanomedicine for drug resistant pathogens and COVID-19 using mushroom nanocomposite inspired with bacteriocin – A Review

Multidrug resistant (MDR) pathogens have become a major global health challenge and have severely threatened the health of society. Current conditions have gotten worse as a result of the COVID-19 pandemic, and infection rates in the future will rise. It is necessary to design, respond effectively, and take action to address these challenges by investigating new avenues. In this regard, the fabrication of metal NPs utilized by various methods, including green synthesis using mushroom, is highly versatile, cost-effective, eco-compatible, and superior. In contrast, biofabrication of metal NPs can be employed as a powerful weapon against MDR pathogens and have immense biomedical applications. In addition, the advancement in nanotechnology has made possible to modify the nanomaterials and enhance their activities. Metal NPs with biomolecules composite to prevents their microbial adhesion and kills the microbial pathogens through biofilm formation. Bacteriocin is an excellent antimicrobial peptide that works well as an augmentation substance to boost the antimicrobial effects. As a result, we concentrate on the creation of new, eco-compatible mycosynthesized metal NPs with bacteriocin nanocomposite via electrostatic, covalent, or non-covalent bindings. The synergistic benefits of metal NPs with bacteriocin to combat MDR pathogens and COVID-19, as well as other biomedical applications, are discussed in this review. Moreover, the importance of the adverse outcome pathway (AOP) in risk analysis of manufactured metal nanocomposite nanomaterial and their future possibilities also discussed.

A Bifunctional Spray Coating Reduces Contamination on Surfaces by Repelling and Killing Pathogens

Surface-mediated transmission of pathogens is a major concern with regard to the spread of infectious diseases. Current pathogen prevention methods on surfaces rely on the use of biocides, which aggravate the emergence of antimicrobial resistance and pose harmful health effects. In response, a bifunctional and substrate-independent spray coating is presented herein. The bifunctional coating relies on wrinkled polydimethylsiloxane microparticles, decorated with biocidal gold nanoparticles to induce a "repel and kill" effect against pathogens. Pathogen repellency is provided by the structural hierarchy of the microparticles and their surface chemistry, whereas the kill mechanism is achieved using functionalized gold nanoparticles embedded on the microparticles. Bacterial tests with methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa reveal a 99.9% reduction in bacterial load on spray-coated surfaces, while antiviral tests with Phi6─a bacterial virus often used as a surrogate to SARS-CoV-2─demonstrate a 98% reduction in virus load on coated surfaces. The newly developed spray coating is versatile, easily applicable to various surfaces, and effective against various pathogens, making it suitable for reducing surface contamination in frequently touched, heavy traffic, and high-risk surfaces.

Diabetic wound healing approaches: an update

Diabetic wounds are of profound clinical importance. Despite immense efforts directed towards its management, it results in the development of amputations, following a diagnosis of diabetic foot. With a better understanding of the complexities of the microbalance involved in the healing process, researchers have developed advanced methods for the management of wounds as well as diagnostic tools (especially, for wound infections) to be delivered to clinics sooner. In this review, we address the newer developments that hope to drive the transition from bench to bedside in the coming decade.

Structural parameters of nanoparticles affecting their toxicity for biomedical applications: a review

Rapidly growing interest in using nanoparticles (NPs) for biomedical applications has increased concerns about their safety and toxicity. In comparison with bulk materials, NPs are more chemically active and toxic due to the greater surface area and small size. Understanding the NPs' mechanism of toxicity, together with the factors influencing their behavior in biological environments, can help researchers to design NPs with reduced side effects and improved performance. After overviewing the classification and properties of NPs, this review article discusses their biomedical applications in molecular imaging and cell therapy, gene transfer, tissue engineering, targeted drug delivery, Anti-SARS-CoV-2 vaccines, cancer treatment, wound healing, and anti-bacterial applications. There are different mechanisms of toxicity of NPs, and their toxicity and behaviors depend on various factors, which are elaborated on in this article. More specifically, the mechanism of toxicity and their interactions with living components are discussed by considering the impact of different physiochemical parameters such as size, shape, structure, agglomeration state, surface charge, wettability, dose, and substance type. The toxicity of polymeric, silica-based, carbon-based, and metallic-based NPs (including plasmonic alloy NPs) have been considered separately.

Development of a Polyherbal Topical Gel for the Treatment of Acne

The present work aimed to formulate and evaluate a polyherbal gel using Aloe barbadensis and extract of Vigna radiata for the treatment of acne, a disorder of the skin in which hair follicles and sebaceous glands are blocked, causing inflammation and redness of the skin. Aloe barbadensis pulp was collected and mixed with the extract of Vigna radiata and formulated into a gel using Carbopol 940, triethanolamine, and propylene glycol as the gelling agent, viscosity modifier, and pH modifier, respectively. The gel was evaluated for its antimicrobial properties against Staphylococcus aureus, Escherichia coli, and Candida albicans. Antimicrobial agents, such as gentamycin and fluconazole, were used as the standards. The developed formulation showed promising zone of inhibition. The gel was further evaluated for its physicochemical properties. The formulation showed a promising effect on acne together with the additive effect of Aloe barbadensis on skin.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.

Synthesis of Biogenic Gold Nanoparticles by Using Sericin Protein from Bombyx mori Silk Cocoon and Investigation of Its Wound Healing, Antioxidant, and Antibacterial Potentials

Introduction

A number of biological wastes and factory waste materials have been tested recently for the eco-friendly biosynthesis of nanoparticles. Sericin protein (SSP) is usually removed from the silk cocoon during the degumming process in the process of making the silk, and this sericin protein is normally thrown away by the sericulture industries as waste materials. It is found that this sericin protein possesses a number of biological properties.

Methods

Considering this, in the present study, an effort has been made to biosynthesize gold nanoparticles (SSP-AuNPs) using the waste sericin solution as the reducing and capping agent and investigate its biopotential in terms of its wound healing, antioxidant and antibacterial activities.

Results

The synthesis of SSP-AuNPs was perceived by the visual color change and confirmed by UV-Vis spectroscopy with absorption maxima at 522 nm. Further characterization of SSP-AuNPs was done by TEM, EDS, XRD, FTIR, DLS, zeta potential, TGA, AFM, etc. The size of SSP-AuNPs was found out to be 54.82 nm as per the particle size analyzer and the zeta potential is -19.8 mV. The SSP-AuNPs displayed promising wound healing potential of 70.96 and 69.76% wound closure rate at 5 and 10 µg/mL respectively as compared to 74.91% by the Centella asiatica taken as a positive control. It also exhibited promising antioxidant potential in terms of the DPPH, ABTS free radical scavenging, reducing power potential, and total antioxidant capacity. Besides, the SSP-AuNPs also displayed significant antibacterial activities against the tested pathogenic bacterial with the diameter of inhibition zones ranging between 12.10 and 14.96 mm as compared to the positive control cephalexin that displayed inhibition zones ranging between 12.08 and 13.24 mm.

Discussion

Taken together, SSP-AuNPs could serve as an interesting candidate for food, cosmetics, and biomedical fields in the applications of wound healing, cosmetics, antibacterial bandages, and ointments, etc.

Mechanism and Antibacterial Activity of Gold Nanoparticles (AuNPs) Functionalized with Natural Compounds from Plants

Recently, the biosynthesis of gold nanoparticles (AuNPs) has been widely studied and described. In the age of bacterial drug resistance, an intensive search for new agents with antibacterial properties or a new form of antibiotics with effective action is necessary. As a result, the antibacterial activity of AuNPs functionalized with natural compounds is being investigated more frequently. AuNPs biosynthesized with plant extract or functionalized with bioactive compounds isolated from plants could be particularly useful for pharmaceutical applications. The biosynthesized AuNPs are stabilized by an envelope, which may consist of flavonoids, phenolic acids, lipids and proteins as well as carbohydrates and vitamins. The composition of the natural coating affects the size, shape and stability of the AuNPs and is also responsible for interactions with the bacterial cell wall. Recently, several mechanisms of AuNP interactions with bacterial cells have been identified. Nevertheless, they are not yet well understood, due to the large diversity of plants and biosynthesized AuNPs. Understanding the antibacterial mechanisms allows for the creation of pharmaceutical formulations in the most useful form. Utilizing AuNPs functionalized with plant compounds as antibacterial agents is still a new concept. However, the unique physicochemical and biological properties of AuNPs emphasises their potential for a broad range of applications in the future.

Microcurrent and Gold Nanoparticles Combined with Hyaluronic Acid Accelerates Wound Healing

This study aimed to investigate the effects of iontophoresis and hyaluronic acid (HA) combined with a gold nanoparticle (GNP) solution in an excisional wound model. Fifty Wistar rats (n = 10/group) were randomly assigned to the following groups: excisional wound (EW); EW + MC; EW + MC + HA; EW + MC + GNPs; and EW + MC + HA + GNPs. The animals were induced to a circular excision, and treatment started 24 h after injury with microcurrents (300 µA) containing gel with HA (0.9%) and/or GNPs (30 mg/L) in the electrodes (1 mL) for 7 days. The animals were euthanized 12 h after the last treatment application. The results demonstrate a reduction in the levels of pro-inflammatory cytokines (IFNϒ, IL-1β, TNFα, and IL-6) in the group in which the therapies were combined, and they show increased levels of anti-inflammatory cytokines (IL-4 and IL-10) and growth factors (FGF and TGF-β) in the EW + MC + HA and EW + MC + HA + GNPs groups. As for the levels of dichlorofluorescein (DCF) and nitrite, as well as oxidative damage (carbonyl and sulfhydryl), they decreased in the combined therapy group when compared to the control group. Regarding antioxidant defense, there was an increase in glutathione (GSH) and a decrease in superoxide dismutase (SOD) in the combined therapy group. A histological analysis showed reduced inflammatory infiltrate in the MC-treated groups and in the combination therapy group. There was an increase in the wound contraction rate in all treated groups when compared to the control group, proving that the proposed therapies are effective in the epithelial healing process. The results of this study demonstrate that the therapies in combination favor the tissue repair process more significantly than the therapies in isolation.

Recent Advances in Functionalization of Cotton Fabrics with Nanotechnology

Nowadays, consumers understand that upgrading their traditional clothing can improve their lives. In a garment fabric, comfort and functional properties are the most important features that a wearer looks for. A variety of textile technologies are being developed to meet the needs of customers. In recent years, nanotechnology has become one of the most important areas of research. Nanotechnology’s unique and useful characteristics have led to its rapid expansion in the textile industry. In the production of high-performance textiles, various finishing, coating, and manufacturing techniques are used to produce fibers or fabrics with nano sized (10⁻⁹) particles. Humans have been utilizing cotton for thousands of years, and it accounts for around 34% of all fiber production worldwide. The clothing industry, home textile industry, and healthcare industry all use it extensively. Nanotechnology can enhance cotton fabrics’ properties, including antibacterial activity, self-cleaning, UV protection, etc. Research in the field of the functionalization of nanotechnology and their integration into cotton fabrics is presented in the present study.

Cell membrane-coated nanoparticles for the treatment of bacterial infection

Despite the enormous success of antibiotics in antimicrobial therapy, the rapid emergence of antibiotic resistance and the complexity of the bacterial infection microenvironment make traditional antibiotic therapy face critical challenges against resistant bacteria, antitoxin, and intracellular infections. Consequently, there is a critical need to design antimicrobial agents that target infection microenvironment and alleviate antibiotic resistance. Cell membrane-coated nanoparticles (CMCNPs) are biomimetic materials that can be obtained by wrapping the cell membrane vesicles directly onto the surface of the nanoparticles (NPs) through physical means. Incorporating the biological functions of cell membrane vesicles and the superior physicochemical properties of NPs, CMCNPs have shown great promise in recent years for targeting infections, neutralizing bacterial toxins, and designing bacterial infection vaccines. This review highlights topics where CMCNPs present great value in advancing the treatment of bacterial infections, including drug delivery, detoxification, and vaccination. Lastly, we discuss the future hurdles and prospects of translating this technique into clinical practice, providing a comprehensive review of the technological developments of CMCNPs in the treatment of bacterial infections. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Therapeutic Approaches and Drug Discovery > Emerging Technologies Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Organic-free growth of gold nanosheets inside 3D bacterial cellulose as highly efficient and robust antibacterial biopolymers

Without any chemical agent, gold nanosheets (AuNSs) were controllable synthesized through a facile photo-induced reduction within bacterial cellulose (BC) biopolymers. Compared with traditional polymers, AuNSs modified BC biopolymers (AuNSs@BC) biopolymers exhibited similar levels of softness, ductility, and better tensile strength. The in situ constructing of AuNSs@BC biopolymers was demonstrated to provide great reusability and antibacterial activities and towards both of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The optimized AuNSs@BC biopolymers remain at least 95% antibacterial activities after three cycles. The facile and shape-controlled synthesis of AuNSs@BC biopolymers is believed to be useful for the design and application of biomass-based medical dressing.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10853-022-07273-x.

Romanian Viscum album L.—Untargeted Low-Molecular Metabolomic Approach to Engineered Viscum–AuNPs Carrier Assembly

Viscum is one of the most famous and appreciated medicinal plants in Europe and beyond. The symbiotic relationship with the host tree and various endogenous and ecological aspects are the main factors on which the viscum metabolites’ profiles depend. In addition, European traditional medicine mentions that only in two periods of the year (summer solstice and winter solstice) the therapeutic potential of the plant is at its maximum. Many studies have investigated the phytotherapeutic properties of viscum grown on different species of trees. However, studies on Romanian viscum are relatively few and refer mainly to the antioxidant and antiproliferative activity of mistletoe grown on Acer campestre, Fraxinus excelsior, Populus nigra, Malus domestica, or Robinia pseudoacacia. This study reports the first complete low-molecular-weight metabolite profile of Romanian wild-grown European viscum. A total of 140 metabolites were identified under mass spectra (MS) positive mode from 15 secondary metabolite categories: flavonoids, amino acids and peptides, terpenoids, phenolic acids, fatty acids, organic acids, nucleosides, alcohols and esters, amines, coumarins, alkaloids, lignans, steroids, aldehydes, and miscellaneous. In addition, the biological activity of each class of metabolite is discussed. The development of a simple and selective phyto-engineered AuNPs carrier assembly is reported and an evaluation of the nanocarrier system’s morpho-structure is performed, to capitalize on the beneficial properties of viscum and AuNPs.

Green synthesis of novel stable biogenic gold nanoparticles for breast cancer therapeutics via the induction of extrinsic and intrinsic pathways

Biosynthesis of gold nanoparticles (AuNPs) using algal polysaccharides is a simple, low-cost, and an eco-friendly approach. In the current study, different concentrations of Arthospira platensis exopolysaccharides (EPS) were used to synthetize AuNPs via the reduction of gold ions. The biologically synthesized AuNPs (AuNPs1, AuNPs2, AuNPs3) were prepared in 3 different forms through the utilization of three different ratios of EPS-reducing agents. AuNPs analysis confirmed the spherical shape of the EPS-coated AuNPs. Furthermore, AuNPs prepared by EPS and l-ascorbic acid (AuNPs3) showed more stability than the AuNPs colloidal solution that was prepared using only l-ascorbic acid. Analysis of the antimicrobial effects of AuNPs showed that E. coli was the most sensitive bacterial species for AuNPs3 and AuNPs1 with inhibition percentages of 88.92 and 83.13%, respectively. Also, safety assay results revealed that AuNPs3 was the safest biogenic AuNPs for the tested noncancerous cell line. The anticancer assays of the biogenic AuNPs1, AuNPs2, and AuNPs3 against MCF-7 cell line indicated that this cell line was the most sensitive cell line to all treatments and it showed inhibition percentages of 66.2%, 57.3%, and 70.2% to the three tested AuNPs, respectively. The AuNPs also showed abilities to arrest MCF-7 cells in the S phase (77.34%) and increased the cellular population in the sub G0 phase. Gene expression analysis showed that AuNPs3 down regulated Bcl2, Ikapα, and Survivn genes in MCF-7 treated-cells. Also, transmission electron microscopy (TEM) analysis of MCf-7 cells revealed that AuNPs 3 and AuNPs2 were localized in cell vacuoles, cytoplasm, and perinuclear region.

Evaluation of antimicrobial, anticancer potential and Flippase induced leakage in model membrane of Centella asiatica fabricated MgONPs

The use of chemically synthesized nanoparticles and crude plant extracts as antimicrobial -anticancer agents have many limitations. In this study, we have used Centella asiatica extract (CaE) having relatively less explored but tremendous medicinal properties, as reducing and stabilizing agents to green synthesize magnesium oxide nanoparticles (MgONPs) using magnesium nitrate. In comparison to the bulk material, capabilities of Ca-MgONPs as an improved antibacterial, antifungal, and anticancer agent in human prostatic carcinoma cells (PC3), as well as membranolytic capability in model cell membrane, were studied. The phyto-functionalized Ca-MgONPs were characterized using UV-Visible spectroscopy (UV-Vis), Transmission Electron Microscopy (TEM), Energy Dispersive X-Ray Spectroscopy (EDX), X-ray Diffraction (XRD), Fourier Transform Infra-Red Spectroscopy (FT-IR) and Atomic Force Microscopy (AFM). Observation of characteristic peaks by spectroscopic and microscopic analysis confirmed the synthesis of Ca-MgONPs. The Ca-MgONPs showed broad spectrum of bactericidal activity against both gram-positive and gram-negative bacteria and fungicidal activity against two species of the Candida fungus. The Ca-MgONPs also exhibited dose-dependent and selective inhibition of proliferating PC3 cells with IC₅₀ of 123.65 ± 4.82 μg/mL at 24 h, however, without having any cytotoxicity toward non-cancerous HEK293 cells. Further studies aimed at understanding the probable mechanism of toxicity of Ca-MgONPs in PC3 cells, the results indicated a significant reduction in cell migration capacities, increment in cytosolic ROS, loss of mitochondrial transmembrane potential, DNA damage and S-phase cell cycle arrest. Ca-MgONPs also induced pore formation in a synthetic large unilamellar vesicle. Thus, Ca-MgONPs might be useful in the effective management of several human pathogens of concern and some more cancer types.

Polymeric biomaterials for wound healing applications: a comprehensive review

Chronic wounds have been a global health threat over the past few decades, requiring urgent medical and research attention. The factors delaying the wound-healing process include obesity, stress, microbial infection, aging, edema, inadequate nutrition, poor oxygenation, diabetes, and implant complications. Biomaterials are being developed and fabricated to accelerate the healing of chronic wounds, including hydrogels, nanofibrous, composite, foam, spongy, bilayered, and trilayered scaffolds. Some recent advances in biomaterials development for healing both chronic and acute wounds are extensively compiled here. In addition, various properties of biomaterials for wound-healing applications and how they affect their performance are reviewed. Based on the recent literature, trilayered constructs appear to be a convincing candidate for the healing of chronic wounds and complete skin regeneration because they mimic the full thickness of skin: epidermis, dermis, and the hypodermis. This type of scaffold provides a dense superficial layer, a bioactive middle layer, and a porous lower layer to aid the wound-healing process. The hydrophilicity of scaffolds aids cell attachment, cell proliferation, and protein adhesion. Other scaffold characteristics such as porosity, biodegradability, mechanical properties, and gas permeability help with cell accommodation, proliferation, migration, differentiation, and the release of bioactive factors.

Theranostic Contribution of Extracellular Matrix Metalloprotease Inducer-Paramagnetic Nanoparticles Against Acute Myocardial Infarction in a Pig Model of Coronary Ischemia-Reperfusion

Rapid screening and accurate diagnosis of acute myocardial infarction are critical to reduce the progression of myocardial necrosis, in which proteolytic degradation of myocardial extracellular matrix plays a major role. In previous studies, we found that targeting the extracellular matrix metalloprotease inducer (EMMPRIN) by injecting nanoparticles conjugated with the specific EMMPRIN-binding peptide AP9 significantly improved cardiac function in mice subjected to ischemia/reperfusion.

In situ synthesis and characterization of colloidal AuNPs capped nano-chitosan containing poly(2,5-dimethoxyaniline) nanocomposites for biomedical applications

Herein, we have successfully synthesized a novel nCS-PDMA/AuNPs nanocomposite based on nano-chitosan containing poly(2,5-dimethoxyaniline) capped gold nanoparticle in situ synthesis is reported. The AuNPs were synthesized using the green method without using any harmful chemicals, reducing and stabilizing agents to generate AuNPs, is not needed because these roles are played by nCS. The synthesized nCS-PDMA/AuNPs nanocomposite were characterized by UV-Vis, FT-IR, XRD, SEM, and TEM analysis. The polydispersed nCS-PDMA/AuNPs nanocomposite was observed approximately 25 nm. Furthermore, nCS-PDMA/AuNPs nanocomposite was showed significant antibacterial activity against S. aureus and E. coli. The nCS-PDMA/AuNPs nanocomposite showed strong antioxidant activity by inhibiting the DPPH radicals. In addition, the cytotoxicity of nCS-PDMA/AuNPs nanocomposite was tested in HeLa cells and found to be high toxicity than nCS-PDMA. This work suggests that green synthesized nCS-PDMA/AuNPs nanocomposite may be utilized as an effective antibacterial, antioxidant, and anticancer activity.[Figure: see text]Research highlightsnCS-PDMA capped gold nanoparticles (nCS-PDMA/AuNPs) were prepared.Physical characterization of nCS-PDMA/AuNPs by UV-vis, FTIR, XRD, SEM, and TEM.nCS-PDMA/AuNPs displayed promising inhibitory activity against both bacteria.nCS-PDMA/AuNPs showed significant DPPH radical scavenging activities.nCS-PDMA/AuNPs showed an excellent anticancer activity against HeLa cells.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Broad-Spectrum Theranostics and Biomedical Application of Functionalized Nanomaterials

Nanotechnology is an important branch of science in therapies known as “nanomedicine” and is the junction of various fields such as material science, chemistry, biology, physics, and optics. Nanomaterials are in the range between 1 and 100 nm in size and provide a large surface area to volume ratio; thus, they can be used for various diseases, including cardiovascular diseases, cancer, bacterial infections, and diabetes. Nanoparticles play a crucial role in therapy as they can enhance the accumulation and release of pharmacological agents, improve targeted delivery and ultimately decrease the intensity of drug side effects. In this review, we discussthe types of nanomaterials that have various biomedical applications. Biomolecules that are often conjugated with nanoparticles are proteins, peptides, DNA, and lipids, which can enhance biocompatibility, stability, and solubility. In this review, we focus on bioconjugation and nanoparticles and also discuss different types of nanoparticles including micelles, liposomes, carbon nanotubes, nanospheres, dendrimers, quantum dots, and metallic nanoparticles and their crucial role in various diseases and clinical applications. Additionally, we review the use of nanomaterials for bio-imaging, drug delivery, biosensing tissue engineering, medical devices, and immunoassays. Understandingthe characteristics and properties of nanoparticles and their interactions with the biological system can help us to develop novel strategies for the treatment, prevention, and diagnosis of many diseases including cancer, pulmonary diseases, etc. In this present review, the importance of various kinds of nanoparticles and their biomedical applications are discussed in much detail.

Green Synthesis of Gold and Silver Nanoparticles Using Leaf Extract of Capsicum chinense Plant

So far, several studies have focused on the synthesis of metallic nanoparticles making use of extracts from the fruit of the plants from the genus Capsicum. However, as the fruit is the edible, and highly commercial, part of the plant, in this work we focused on the leaves, a part of the plant that is considered agro-industrial waste. The biological synthesis of gold (AuNPs) and silver (AgNPs) nanoparticles using aqueous extracts of root, stem and leaf of Capsicum chinense was evaluated, obtaining the best results with the leaf extract. Gold and silver nanoparticles synthesized using leaf extract (AuNPs-leaf and AgNPs-leaf, respectively) were characterized by UV-visible spectrophotometry (UV-Vis), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR), X-ray Photoelectron Spectroscopy (XPS), Ultra Hight Resolution Scanning Electron Microscopy coupled to Energy-Dispersive X-ray spectroscopy (UHR-SEM-EDX) and Transmission Electron Microscopy (TEM), and tested for their antioxidant and antimicrobial activities. In addition, different metabolites involved in the synthesis of nanoparticles were analyzed. We found that by the use of extracts derived from the leaf, we could generate stable and easy to synthesize AuNPs and AgNPs. The AuNPs-leaf were synthesized using microwave radiation, while the AgNPs-leaf were synthesized using UV light radiation. The antioxidant activity of the extract, determined by ABTS, showed a decrease of 44.7% and 60.7% after the synthesis of the AuNPs-leaf and AgNPs-leaf, respectively. After the AgNPs-leaf synthesis, the concentration of polyphenols, reducing sugars and amino acids decreased by 15.4%, 38.7% and 46.8% in the leaf extract, respectively, while after the AuNPs-leaf synthesis only reducing sugars decreased by 67.7%. These results suggest that these groups of molecules are implicated in the reduction/stabilization of the nanoparticles. Although the contribution of these compounds in the synthesis of the AuNPs-leaf and the AgNPs-leaf was different. Finally, the AgNPs-leaf inhibited the growth of S. aureus, E. coli, S. marcescens and E. faecalis. All of them are bacterial strains of clinical importance due to their fast antibiotic resistance development.

Metallic Nanoparticles: A New Frontier in the Fight Against Leishmaniasis

Abstract:

Leishmaniasis is a cutaneous, mucocutaneous, or visceral parasitic disease caused by protozoa of the Leishmania genus. According to the World Health Organization, Leishmaniasis causes approximately 20–40 thousand deaths annually, and Brazil, India, and some countries in Africa are the most affected by this neglected disease. In addition to parasite’s ability to evade the host’s immune system, the incidence of vectors, the genetics of different hosts, and the large number of deaths are mainly due to failures in conventional treatments that have high toxicity, low effectiveness, and prolonged therapeutic regimens. Thus, the development of new alternative therapeutics with more effective and safer actions has become one of the main challenges for researchers studying leishmaniasis. Among the many research and tested options, metallic nanoparticles, such as gold, silver, zinc oxide, and titanium dioxide, have been shown to be one of the most promising therapeutic tool because they are easily prepared and chemically modified, have a broad spectrum of action, low toxicity, and can generate reactive oxygen species and other immune responses that favor their use against different species of Leishmania. This review explores the progress of the use of metallic nanoparticles as a new tool in the treatment of leishmaniasis, as well as discusses the gaps in knowledge that need to be addressed to consolidate a safe, effective, and definitive therapeutic intervention against these infections.

Nanomedicine of Plant Origin for the Treatment of Metabolic Disorders

Metabolic disorders are major clinical challenges of health that are progressing globally. A concurrence of metabolic disorders such as obesity, insulin resistance, atherogenic dyslipidemia, and systematic hypertension leads to metabolic syndrome. Over the past years, the metabolic syndrome leads to a five- and two-fold rise in diabetes mellitus type II and cardiovascular diseases. Natural products specifically plant extracts have insulin-sensitizing, anti-inflammatory, and antioxidant properties and are also considered as an alternative option due to few adverse effects. Nanotechnology is one of the promising strategies, which improves the effectiveness of treatment and limits side effects. This review mainly focuses on plant extract-based nanosystems in the management of the metabolic syndrome. Numerous nano-drug delivery systems, i.e., liposomes, hydrogel nanocomposites, nanoemulsions, micelles, solid lipid, and core–shell nanoparticles, have been designed using plant extracts. It has been found that most of the nano-formulations successfully reduced oxidative stress, insulin resistance, chronic inflammation, and lipid profile in in vitro and in vivo studies as plant extracts interfere with the pathways of metabolic syndrome. Thus, these novel plant-based nanosystems could act as a promising candidate for clinical applications.

Electrochemical Properties of Phytosynthesized Gold Nanoparticles for Electrosensing

Gold nanoparticles are widely used in electrosensing. The current trend is to phytosynthesize gold nanoparticles (phyto-AuNPs) on the basis of the “green” chemistry approach. Phyto-AuNPs are biologically and catalytically active, stable and biocompatible, which opens up broad perspectives in a variety of applications, including tactile, wearable (bio)sensors. However, the electrochemistry of phytosynthesized nanoparticles is not sufficiently studied. This work offers a comprehensive study of the electrochemical activity of phyto-AuNPs depending on the synthesis conditions. It was found that with an increase in the aliquot of the plant extract, its antioxidant activity (AOA) and pH, the electrochemical activity of phyto-AuNPs grows, which is reflected in the peak potential decrease and an increase in the peak current of phyto-AuNPs electrooxidation. It has been shown that AOA is an important parameter for obtaining phyto-AuNPs with desired properties. Electrodes modified with phyto-AuNPs have demonstrated better analytical characteristics than electrodes with citrate AuNPs in detecting uric and ascorbic acids under model conditions. The data about the phyto-AuNPs’ electrochemistry may be useful for creating highly effective epidermal sensors with good biocompatibility.

Drug Delivery Systems and Strategies to Overcome the Barriers of Brain

The transport of drugs to the central nervous system is the most challenging task for conventional drug delivery systems. Reduced permeability of drugs through the blood-brain barrier is a major hurdle in delivering drugs to the brain. Hence, various strategies for improving drug delivery through the blood-brain barrier are currently being explored. Novel drug delivery systems (NDDS) offer several advantages, including high chemical and biological stability, suitability for both hydrophobic and hydrophilic drugs, and can be administered through different routes. Furthermore, the conjugation of suitable ligands with these carriers tend to potentiate targeting to the endothelium of the brain and could facilitate the internalization of drugs through endocytosis. Further, the intranasal route has also shown potential, as a promising alternate route, for the delivery of drugs to the brain. This can deliver the drugs directly to the brain through the olfactory pathway. In recent years, several advancements have been made to target and overcome the barriers of the brain. This article deals with a detailed overview of the diverse strategies and delivery systems to overcome the barriers of the brain for effective delivery of drugs.

In vitro fibroblasts viability and migration stimulation of Acalypha indica: an insight on wound healing activity

Background

The current study investigates the antioxidant activity of Acalypha indica aerial parts and root ethanolic extracts and explore whether these extracts will stimulate fibroblasts viability and ability to migrate.

Results

Aerial parts extract exhibited higher DPPH scavenging activity compared to root extract with IC50 of 62 µg/mL and 206 µg/mL, respectively. Both aerial parts and root extracts showed low cytotoxicity towards fibroblasts with 753 µg/mL LD50 for aerial parts and undetected LD50 for root extract. Additionally, aerial parts extract significantly induces fibroblasts proliferation up to 134%. Wound closure investigation showed a significant closure percentage for aerial parts compared to untreated control with 75% at 1 µg/mL and high closure percentage with 70% at 0.1 µg/mL for root extract compared to only 59% closure percentage for untreated control after 48 h of the study.

Conclusions

This study provided evidence for A. indica to have great wound healing potential. The finding builds the scientific background in future to utilise the high antioxidant activity of A. indica and its ability to stimulate fibroblasts migration and proliferation for further applications.

Evaluation of Antimicrobial and Wound Healing Effects of Gold Nanoparticles Containing Abelmoschus esculentus (L.) Aqueous Extract

Background. Wound healing is a complex process of replacing devitalized cellular structures and tissues with healthy cells and tissue. Nanotechnology has been increasingly proposed as a novel platform to treat wounds and skin regeneration. The aim of this study was to evaluate the antibacterial, antioxidant, cytotoxic, and cutaneous wound healing activities of phytosynthesized Au NPs using Abelmoschus esculentus (okra) and synthesized Au NPs by using the citrate synthesis method. The Ok Au NPs were characterized using various techniques like UV-Vis absorption spectroscopy, FTIR, X-ray diffraction (XRD), and transmission electron microscopy (TEM). Cutaneous wounds were created on 30 rats and randomized into three groups: untreated and two groups treated with Ch Au NPs and Ok Au NPs. The treatment was carried out daily for 12 days. A peak characterized the Ok Au NPs at 538 nm in the UV-Vis spectrum. Based on the results of FTIR spectroscopy, various functional oxygenated groups such as hydroxyl, carboxyl, and nitrogenous groups were observed. XRD confirmed the crystalline nature of the nanoparticles. TEM images of Ok Au NPs showed a spherical shape and size range of 75 nm. DPPH test showed similar antioxidant potentials for Au NPs. The Au NPs showed cell viability in a dose-dependent manner, and this technique was found to be nontoxic. Agar well diffusion, which is the method to determine antibacterial characteristics of Au NPs, showed a significant beneficial effect against a variety of bacterial species. In addition, histopathological results showed that Au NPs could accelerate wound closure. Therefore, Au NPs could be suitable for wound healing applications.