Cyclodextrin based nanosponges for pharmaceutical use: a review

Nanosponge hydrogel of octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate of Alcaligenes faecalis

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded β-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: • Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. • The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. • Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.

Bioinspired Self-Adhesive Multifunctional Lubricated Coating for Biomedical Implant Applications

In the realm of clinical applications, the concern surrounding biomedical device-related infections (BDI) is paramount. To mitigate the risk associated with BDI, enhancing surface characteristics such as lubrication and antibacterial efficacy is considered as a strategic approach. This study delineated the synthesis of a multifunctional copolymer, embodying self-adhesive, lubricating, and antibacterial properties, achieved through free radical polymerization and a carbodiimide coupling reaction. The copolymer was adeptly modified on the surface of stainless steel 316L (SS316L) substrates by employing a facile dip-coating technique. Comprehensive characterizations were performed by using an array of analytical techniques including Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, optical interferometry, scanning electron microscopy, and atomic force microscopy. Nanoscale tribological assessments revealed a notable reduction in the value of the friction coefficient of the copolymer-coated SS316L substrates compared to bare SS316L samples. The coating demonstrated exceptional resistance to protein adsorption, as evidenced in protein contamination models employing bovine serum albumin and fibrinogen. The bactericidal efficacy of the copolymer-modified surfaces was significantly improved against pathogenic strains such as Staphylococcus aureus and Escherichia coli. Additionally, in vitro evaluations of blood compatibility and cellular compatibility underscored the remarkable anticoagulant performance and biocompatibility. Collectively, these findings indicated that the developed copolymer coating represented a promising candidate, with its facile modification approach, for augmenting lubrication and antifouling properties in the field of biomedical implant applications.

Clinical application of hempseed or flaxseed oil-based lyotropic liquid crystals: Evaluation of their impact on skin barrier function

The principal function of skin is to form an effective barrier between the human body and its environment. Impaired barrier function represents a precondition for the development of skin diseases such as atopic dermatitis (AD), which is the most common inflammatory skin disease characterized by skin barrier dysfunction. AD significantly affects patients' quality of life, thus, there is a growing interest in the development of novel delivery systems that would improve therapeutic outcomes. Herein, eight novel lyotropic liquid crystals (LCCs) were investigated for the first time in a double-blind, interventional, before-after, single-group trial with healthy adult subjects and a twice-daily application regimen. LCCs consisted of constituents with skin regenerative properties and exhibited lamellar micro-structure, especially suitable for dermal application. The short- and long-term effects of LCCs on TEWL, SC hydration, erythema index, melanin index, and tolerability were determined and compared with baseline. LCCs with the highest oil content and lecithin/Tween 80 mixture stood out by providing a remarkable 2-fold reduction in TEWL values and showing the most distinctive decrease in skin erythema levels in both the short- and long-term exposure. Therefore, they exhibit great potential for clinical use as novel delivery systems for AD treatment, capable of repairing skin barrier function.

Nanosponge: A promising and intriguing strategy in medical and pharmaceutical Science

The complicated chemical reactions involved in the production of the newer drug delivery systems have mainly impeded efforts to build successful targeted drug delivery systems for a prolonged duration of time. Nanosponges, a recently created colloidal system, have the potential to overcome issues with medication toxicity, decreased bioavailability, and drug release over a wide area because they can be modified to work with both hydrophilic and hydrophobic types of drugs. Nanosponges are small sized with a three-dimensional network having a porous cavity. They can be prepared easily by crosslinking cyclodextrins with different compounds. Due to Cyclodextrin's outstanding biocompatibility, stability, and safety, a number of Cyclodextrin-based drug delivery systems have been developed promptly. The nanosponge drug delivery system possesses various applications in various ailments such as cancer, autoimmune diseases, theranostic applications, enhanced bioavailability, stability, etc. This review elaborates on benefits and drawbacks, preparation techniques, factors affecting their preparation, characterization techniques, applications, and most current developments in nanosponges.

Cyclodextrin-based nanosponges as promising carriers for active pharmaceutical ingredient

Effective drug distribution at the intended or particular location is a critical issue that researchers are now dealing. Nanosponges have significantly increased in importance in medication delivery using nanotechnology in recent years. An important step toward solving these problems has been the development of nanosponges. Recently created and proposed for use in drug delivery, nanosponge is a unique type of hyper-crosslinked polymer-based colloidal structures made up of solid nanoparticles with colloidal carriers. Nanosponges are solid porous particles that may hold pharmaceuticals and other actives in their nanocavities. They can be made into dosage forms for oral, parenteral, topical, or inhalation use. The targeted distribution of drugs in a regulated manner is greatly aided by nanosponge. The utilization of nanosponges, their benefits, their production processes, the polymers they are made of, and their characterization have all been covered in this review article.

Ferulic acid grafted into β-cyclodextrin nanosponges ameliorates Paraquat-induced human MRC-5 fibroblast injury

Paraquat (PQ) is a commercially important and effective herbicide in the world. Nevertheless, it has higher toxicity causing acute organ damage and different complications, mainly in the lungs and kidneys. Ferulic acid (FA), 4-hydroxy-3-methoxycinnamic acid imposes multiple pharmacological impacts. No protective effect of FA on PQ poisoning-caused human embryonic lung fibroblast damage has not been reported. Despite their many beneficial effects, FA is characterized by poor water solubility, low bioavailability, and phytochemical instability. To solve the problem, β-cyclodextrin nanosponge (β-CD NSs) was utilized to increase the solubility of FA so that it was grafted into β-CD NSs to establish β-CD@FA NSs. The purpose of this work was to examine for the first time the protective effect of β-CD@FA NS on MRC-5 human lung cells damages induced by PQ poisoning. MTS assay was performed to investigate the viability of MRC-5 cells at different concentrations of FA/β-CD@FA NSs when cells were co-cultured with 0.2 μg/mL PQ. The flow cytometry study was carried out to determine apoptosis. Malondialdehyde (MDA), superoxide dismutase (SOD), and catalase (CAT) levels were detected using appropriate biochemistry kits. Compared with the PQ group, the cell activity, CAT, and SOD levels were significantly increased in the FA and chiefly in β-CD@FA NSs intervention groups, whereas apoptosis and MDA levels were markedly decreased. The inflammatory factors tumor necrosis factor-alpha (TNF-α), interleukin 6 (IL-6), and interleukin 22 (IL-22) were detected. The results demonstrate that β-CD@FA NSs can inhibit PQ-induced cell damage by enhancing antioxidant stress capacity and regulation of inflammatory responses.

Incorporation of exemestane into ternary nanosponge system for enhanced anti-tumor potential in breast cancer

The present investigation reports the potential of exemestane loaded cyclodextrin based nanosponges for the treatment of breast cancer. Fourier transform infrared, and nuclear magnetic resonance (NMR) spectroscopic analysis confirmed the encapsulation of ring B, C, and D of exemestane in the nanosponge cavity. In vitro studies demonstrated a 6.58-folds increase in the aqueous solubility and a 1.76-folds increase in the dissolution of exemestane in the optimized nanosponge formulation EF2. It also exhibited enhanced cytotoxicity in MCF-7 cell line. Pharmacokinetic studies revealed a 1.37-fold increase in Cmax and a 2.10-fold increase in oral bioavailability of EF2, as compared to its marketed product Aromasin®. Concomitantly, this nano-formulation reduced the tumor burden to 45.71% in a DMBA-induced breast cancer rat model. This EF2-treatment also improved the hematological parameters of the animals. Histopathology of breast tissue also presented reduction in characteristic cytoarchitectural features of breast tumor. In vivo toxicity studies demonstrated reduced hepatotoxicity of the nanosponge formulation when compared with Aromasin®. These results were further supported by histological studies of excised liver tissues, where the size of hepatocytes in EF2-treated animals was like the normal hepatocyte size. In conclusion, the encapsulation of exemestane in β-cyclodextrin nanosponge along-with HPMC E5 improved its aqueous solubility, bioavailability, and ultimately therapeutic efficacy for the treatment of breast cancer.

Microwave-Assisted Formation of Ternary Inclusion Complex of Pterostilbene

Pterostilbene (PTS) is a naturally occurring phytoalexin. PTS displays limited water solubility, which consequently results in its diminished oral bioavailability. Therefore, a ternary inclusion complex (TIC) of PTS with β-cyclodextrin (βCD) in the presence of ternary substance Pluronic® F-127 (PLF) was prepared using microwave technology. The PTS-TIC was characterized by dissolution performance. Further, the prepared TIC was characterized by DSC, FTIR, NMR, XRD, and SEM analysis. Additionally, the antioxidant activity of PTS and PTS-TIC was also evaluated. Phase-solubility studies revealed that PTS's solubility in water was increased by 6.72 times when βCD/PLF was present. In comparison with PTS, prepared PTS-TIC produced a considerable improvement in PTS release. After 1 h, 74.03 ± 4.47% of PTS was released from PTS-TIC. Outcomes of DSC, FTIR, NMR, XRD, and SEM analysis revealed that the PTS was enclosed in the βCD cavity. In terms of antioxidant properties, the PTS-TIC formulation demonstrated superior activity compared to PTS, possibly attributed to the improved solubility of PTS resulting from the formation of TIC using microwave technology. It was concluded that microwave technology proved to be an extremely beneficial means of interacting PTS with βCD. In addition to increasing the solubility of PTS, the findings are also expected to improve its bioavailability by increasing its solubility. As a result, this study could provide insight into potential methods for enhancing the solubility of polyphenolic substances like PTS.

Mucoadhesive, Fluconazole-Loaded Nanogels Complexed with Sulfhydryl-β-cyclodextrin for Oral Thrush Treatment

The objective of this study was to generate fluconazole-loaded mucoadhesive nanogels to address the problem of hydrophobicity of fluconazole (FL). An inclusion complex was formulated with sulfhydryl-β-CD (SH-β-CD) followed by nanogels formation by a Schiff base reaction of carbopol 940 (CA-940) and gelatin (GE). For characterization, PXRD, FT-IR analysis, drug content, and phase solubility studies were performed. Similarly, nanogels were assessed for particle size, zeta potential, organoleptic, and spreadability studies. Moreover, drug contents, rheological, in vitro drug permeation, release kinetics, toxicity, and stability studies of nanogels were performed. Furthermore, mucoadhesive characteristics over the buccal mucosal membrane of the goat were evaluated. The nanogels formulated with a higher amount of CA-940 and subsequently loaded with the inclusion complexes of FL showed promising results. PXRD and FT-IR analysis confirmed the physical complexes by displaying a reduction in the intensity of peaks of FL. The average particle size of nanogels was in the range of 257 to 361 nm. The highest drug content of 88% was encapsulated within the FL-SH-β-CD complex. All formulations at 0.5-1% concentration displayed no toxicity to the Caco-2 cell lines. Nanogels loaded with FL-SH-β-CD complexes showed 18-fold improved mucoadhesion on the buccal mucous membrane of the goat when compared to simple nanogels. The in vitro permeation study exhibited significantly enhanced permeation and first-order concentration-dependent drug release was observed. On the bases of these findings, we can conclude that a mucoadhesive nanogel-based drug delivery system can be an ideal therapy for candidiasis.

Covalent Conjugates of Allylbenzenes and Terpenoids as Antibiotics Enhancers with the Function of Prolonged Action

The drug resistance of pathogenic bacteria is often due efflux pumps-specific proteins that remove foreign compounds from bacterial cells. To overcome drug resistance, adjuvants are often used that can inhibit efflux pumps or other systems that ensure the resistance of bacteria to the action of antibiotics. We assumed that a new level of effectiveness with the use of an antibiotic + an adjuvant pair could be achieved by their joint delivery into the pathogen. To test this hypothesis, we constructed a series of molecular carriers based on poly-(olygo-, dendry)mers based on cyclodextrin-grafted PEI or mannan, as well as glycol chitosan, covalently bound to antibiotic, adjuvant, and the oligosaccharide ligand to the macrophage mannose receptor (CD206), which we studied earlier and showed high efficiency and selectivity of delivery of a therapeutic "cargo" to macrophages. Moxifloxacin was used as an antibiotic, and terpenoid and allylbenzene compounds were used as adjuvants, for which we previously discovered the ability to inhibit bacterial efflux pumps. We show that: (a) the resulting structures were stable in vitro for a long time (up to 10 days); (b) they were adsorbed on bacterial cells, providing a local increase in the concentration of the antibiotic and adjuvant in pathogen cells; (c) they were internalized by bacterial cells, ensuring the accumulation of both antibiotic and adjuvant inside bacterial cells; (d) the adjuvant, after entering the bacterial cell, provided inhibition of the efflux pumps; (e) due to this action of the adjuvant, combined with the targeted delivery by the carrier, the antibiotic's half-life in rats increased by more than 2 times, the effective concentration of the drug in the blood plasma (AUC) increased up to 8-10 times; (f) a significant increase in the effectiveness of the antibacterial action against Gram+ and Gram- cells was achieved (up to 3 times). Potentially, such an approach would significantly increase the effectiveness of therapies for a number of infectious and other diseases, reduce the dosage of antibiotics, shorten the duration of treatment, and reduce the risk of developing bacterial resistance. Moreover, the use of a polymer carrier with covalently bound organic molecules of different structures will avoid problems linked to different (suboptimal) solubility and bio-distribution of the administered molecules, which would be almost inevitable when using the same compounds separately. It would be very difficult to find antibiotic/adjuvant pairs that simultaneously achieve optimal concentrations in the same target cells. In our case, terpenoids and alkylbenzenes used as adjuvants are practically insoluble as individual compounds, and their unacceptable pharmacological properties would not allow them to be used as efflux pump inhibitors.

Palladated Cyclodextrin Nanosponge-Alginate Dual Bead as an Efficient Catalyst for Hydrogenation of Nitroarenes in Aqueous Solution

In this study, we present a novel composite material consisting of β-cyclodextrin nanosponge and sodium alginate, used as a support for the immobilization of palladium (Pd) nanoparticles. The composite alginate-cyclodextrin nanosponge beads were prepared, taking advantage of the 3D polymeric network and β-cyclodextrin cavity of the nanosponge. These beads exhibited excellent encapsulation capabilities for hydrophobic substrates, allowing their transfer in aqueous media. The cyclodextrin nanosponge served as a stabilizer for Pd nanoparticles and facilitated phase transfer. Additionally, the sodium alginate bead contributed to the robustness of the structure and improved the recovery and recyclability of the composite material. Comparative studies with control catalysts confirmed the beneficial effect of incorporating cyclodextrin nanosponge within alginate beads, particularly for more hydrophobic substrates. Optimization of reaction conditions revealed that employing 0.03 g of catalyst per mmol of nitroarene at 45 °C resulted in the maximum yield within 90 min. Evaluation of the substrate scope demonstrated the hydrogenation capability of various substrates with different electronic properties under the developed protocol. Notably, the nitro group was selectively reduced in substrates featuring competing functionalities. Furthermore, the recyclability and stability of the composite catalyst were confirmed, making it a promising candidate for sustainable catalysis.

Comparative evaluation of dithranol-loaded nanosponges fabricated by solvent evaporation technique and melt method

Background

Dithranol, a standard drug for psoriasis, has lured keen attention by virtue of its antioxidant, anti-proliferative and anti-inflammatory activities. However, its poor stability and solubility critically impair the formulation design, evaluation and administration. To improve these issues, dithranol was encased in β-cyclodextrin nanosponges using solvent evaporation technique. Previously, nanosponges containing dithranol were developed in our laboratory using melt technique. Herein, a comparison of nanosponges prepared by both techniques was also included.

Results

Different nanosponge batches were engineered using diphenyl carbonate as cross-linker with β-cyclodextrin as polymer employing solvent evaporation technique. Dithranol was loaded in nanosponges via lyophilization. Fourier transform infrared spectroscopy, differential scanning colorimeter and powdered X-ray diffraction studies confirmed successful encapsulation and complexation of this drug in β-cyclodextrin nanosponges. The effect of a variable amount of cross-linker on the solubility, encapsulation efficiency, zeta potential, particle size and polydispersity index was evaluated in fabricated nanocarriers. Further, β-cyclodextrin nanosponge batches were subjected to solubility studies, photostability examination and antioxidant activity analysis and compared with previously prepared dithranol-loaded nanosponges. From the present studies results, it was concluded that dithranol-loaded nanosponges using solvent evaporation technique not only improved solubility and photostability but also preserved the antioxidant efficacy of the chosen drug.

Conclusion

The overall results emphasized moral guidance concerning encapsulation, evaluation and characterization and accredited dithranol solubilization, photostability and antioxidant potential. However, solvent evaporation and melt method are easy and promising methods to fabricate nanosponges for dithranol. This comparative study demonstrated the parameters which were affected by chosen techniques. Further, from the results of present studies, it was concluded that the formulation scientists should select the preparation technique based on the objective of their research work and requirement of desired features.

Graphical abstract

Ent-kaurenoic acid-enriched Mikania glomerata leaves-complexed β-cyclodextrin: Pharmaceutical development and in vivo antitumor activity in a sarcoma 180 mouse model

The extract obtained from Mikania glomerata leaves rich in ent-kaurenoic acid (ERKA) shows cytotoxic activity in vitro, but its hydrophobic nature and thermosensitivity are issues to be solved prior to in vivo antitumor studies. The purpose of this study was to investigate the antitumor activity of inclusion complexes formed between ERKA and β-cyclodextrin (ERKA:β-CD) in rodents. ERKA:β-CD complexes obtained by malaxation (MX) and co-evaporation (CE) methods were firstly characterized regarding their physical properties, encapsulation efficiency, and cytotoxicity againts L929 cells. The antitumor activity study was then performed in mice with sarcoma 180 treated with saline, 5-fluouracil (5FU) and ERKA:β-CD at 30, 100 and 300 µg/kg. The weight, volume, percentage of inhibition growth, gross and pathological features and positivity for TUNEL, ki67, NFκB and NRF2 in the tumors were assessed. Serum lactate-dehydrogenase activity (LDH), white blood cells count (WBC) and both gross and pathological features of the liver, kidneys and spleen were also evaluated. The formation of the inclusion complexes was confirmed by thermal analysis and FTIR, and they were non-toxic for L929 cells. The MX provided a better complexation efficiency. ERKA:β-CD300 promoted significant tumor growth inhibition, and attenuated the tumor mitotic activity and necrosis content, comparable to 5-fluorouracil. ERKA:β-CD300 also increased TUNEL-detected cell death, reduced Ki67 and NF-kB immunoexpression, and partially inhibited the serum LDH activity. No side effect was observed in ERKA:β-CD300-treated animals. The ERKA:β-CD inclusion complexes at 300 µg/kg displays antitumour activity in mice with low systemic toxicity, likely due to inhibition on the NF-kB signaling pathway and LDH activity.

Nanosponges- Versatile Platform as Drug Carrier

BACKGROUND

Recently, nano-drug delivery systems have become an integral part of the most novel drug delivery systems and have gained considerable importance owing to various advantages such as carriers for poorly soluble drugs, targeting molecules at the desired site, protection from degradation etc. Objective: One of the most studied areas of nanotechnology is nanosponges. The objective of this review was to extensively summarize the various strategies for the preparation, characterization and applications of nanosponges.

METHODS

In the current mini-review, we conducted a systemic search of the literature and patent inventions focusing on nanosponges. The summary of the search was inclusive of various aspects of nanosponges, such as drug characteristics to be considered while incorporating in nanosponges, other crucial additives during formulation of nanosponges, methods of preparation, characterization and applications of nanosponges in pharmaceuticals.

RESULTS

Nanosponges are nanocarriers for both lipophilic and hydrophilic drugs. These are prepared by different methods such as emulsion-solvent evaporation, solvent method, melting method, ultrasound assisted method etc., and all these methods were less time consuming, more economical and evaluated by sophisticated techniques available for routine analysis. These are among the most feasible alternative to address several formulation difficulties associated with the physicochemical properties of the drug. The porous nature and small particle size are vital properties of the nanosponges that contribute crucially to correcting the drawbacks of the drug. The properties of the nanosponges can be enhanced when combined with cyclodextrins. Extensive research work has been carried out in past to explore cyclodextrin based nanosponges. Besides, it is also used for smart targeting of tumors and for drug release in a sustainable pattern. Nanosponges can be prepared by simple methods. These can be tuned to release the drug by different routes so as to achieve the maximum benefits of the drug.

CONCLUSION

Huge amount of research has been carried out on nanosponges as drug carrier. The method of preparation and characterization of nanosponges are quite economical and routinely available. Owing to potential benefits and probable applications, these can be used as efficient carriers for certain drugs. The authors expect that the current review will guide the investigation of the nanosponges as nanodrug delivery systems.

Herbal microsponge incorporated sunscreen gel: A novel strategy

Different dermatological disorders have different effects on the lives of patients. Recently microsponge formulations have been used to treat several dermatological complications. Microsponges are basically tiny sponge like spherical particles with porous surface having valuable and attractive effect on topical delivery. The side effect of the used drug can be reduced, bioavailability can be increased, and the drug release can be modified. Microsponges can be used in different bases like gel, lotion, ointment and even in powder form. Microsponges used in sunscreen gel are now very popular. Excessive UV exposure leads to different pathological conditions like skin burns, erythema, skin carcinogenesis, etc., The microsponge sunscreen gel protects our skin from all these skin problems and most importantly, with a very less amount of side effects compared to others. Moreover, microsponges are very much cost effective, easy to handle, can deliver minimum dose of drug and enhance the stability.

Complexing the Marine Sesquiterpene Euplotin C by Means of Cyclodextrin-Based Nanosponges: A Preliminary Investigation

Euplotin C is a sesquiterpene of marine origin endowed with significant anti-microbial and anti-tumor properties. Despite the promising functional profile, its progress as a novel drug candidate has failed so far, due to its scarce solubility and poor stability in aqueous media, such as biological fluids. Therefore, overcoming these limits is an intriguing challenge for the scientific community. In this work, we synthesized β-cyclodextrin-based nanosponges and investigated their use as colloidal carriers for stably complex euplotin C. Results obtained proved the ability of the carrier to include the natural compound, showing remarkable values of both loading efficiency and capacity. Moreover, it also allowed us to preserve the chemical structure of the loaded compound, which was recovered unaltered once extracted from the complex. Therefore, the use of β-cyclodextrin-based nanosponges represents a viable option to vehiculate euplotin C, thus opening up its possible use as pharmacologically active compound.

β-Cyclodextrin-Based Nanosponges Inclusion Compounds Associated with Gold Nanorods for Potential NIR-II Drug Delivery

This article describes the synthesis and characterization of two nanocarriers consisting of β-cyclodextrin-based nanosponges (NSs) inclusion compounds (ICs) and gold nanorods (AuNRs) for potential near-infrared II (NIR-II) drug-delivery systems. These nanosystems sought to improve the stability of two drugs, namely melphalan (MPH) and curcumin (CUR), and to trigger their photothermal release after a laser irradiation stimulus (1064 nm). The inclusion of MPH and CUR inside each NS was confirmed by field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, Fourier transform infrared spectroscopy, (FT-IR) differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and proton nuclear magnetic resonance (1H-NMR). Furthermore, the association of AuNRs with both ICs was confirmed by FE-SEM, energy-dispersive spectroscopy (EDS), TEM, dynamic light scattering (DLS), ζ-potential, and UV–Vis. Moreover, the irradiation assays demonstrated the feasibility of the controlled-photothermal drug release of both MPH and CUR in the second biological window (1000–1300 nm). Finally, MTS assays depicted that the inclusion of MPH and CUR inside the cavities of NSs reduces the effects on mitochondrial activity, as compared to that observed in the free drugs. Overall, these results suggest the use of NSs associated with AuNRs as a potential technology of controlled drug delivery in tumor therapy, since they are efficient and non-toxic materials.

Evaluation of EDTA Dianhydride Versus Diphenyl Carbonate Nanosponges for Curcumin

Cyclodextrin-based nanosponges are widely investigated for several applications and are considered potential drug carriers. The method of nanosponges preparation involves the use of chemical cross-linking agents where the properties of Nanosponges can be affected. This study compared the resulting differences in the final nanosponges' properties using carbonate and dianhydride crosslinkers. Diphenyl carbonate and EDTA dianhydride were used for the synthesis of nanosponges. Both types of nanosponges were loaded with curcumin as a model drug. Physicochemical characterizations, including PXRD, DSC, FTIR, scanning electron microscopy, AFM, particle size, zeta potential, and surface area analysis, were carried out for the prepared nanosponges. Curcumin release and drug content were also evaluated. Nanosponges prepared by Diphenyl carbonate crosslinker resulted in an amorphous form compared to crystalline EDTA-nanosponges. This study reported the successful inclusion and complexation of curcumin inside carbonate cross-linked cyclodextrin-based nanosponges and suggested the physical entrapment of crystalline curcumin in EDTA dianhydride. These findings were further investigated and supported by computational modeling.

Versatile Applications of Nanosponges in Biomedical Field: A Glimpse on SARS-CoV-2 Management

Nanotechnology has a versatile use in the field of disease therapy, targeted drug delivery, biosensing, and environmental protection. The cross-linked nanosponges are one of the types of nanostructures that provide huge application in the biomedical field. They are available up to the fourth generation and can act as a payload for both kinds of hydrophilic and hydrophobic drugs. There are different methods available for the synthesis of these nanosponges as well as loading the drugs inside them. A variety of approved drugs based on nanosponges are already in the market including drugs for cancer. Other applications include the uses of nanosponges as topical agent, in improving solubility, as protein carrier, in chemical sensors, in wastewater remediation, and in agriculture. The present review discusses in detail about different applications of nanosponges and also mentions about the recent SARS-CoV-2 management using nanosponges.

Emerging trends of nanotechnology in advanced cosmetics

The cosmetic industry is dynamic and ever-evolving. Especially with the introduction and incorporation of nanotechnology-based approaches into cosmetics for evincing novel formulations that confers aesthetic as well as therapeutic benefits. Nanocosmetics acts via numerous delivery mechanisms which involves lipid nanocarrier systems, polymeric or metallic nanoparticles, nanocapsules, dendrimers, nanosponges,etc. Each of these, have particular characteristic properties, which facilitates increased drug loading, enhanced absorption, better cosmetic efficacy, and many more. This article discusses the different classes of nanotechnology-based cosmetics and the nanomaterials used for their formulation, followed by outlining the categories of nanocosmetics and the scope of their utility pertaining to skin, hair, nail, lip, and/or dental care and protection thereof. This review also highlights and discusses about the key drivers of the cosmetic industry and the impending need of corroborating a healthy regulatory framework, refocusing attention towards consumer needs and trends, inculcating sustainable techniques and tenets of green ecological principles, and lastly making strides in nano-technological advancements which will further propel the growth of the cosmetic industry.

Evolving era of "sponges": Nanosponges as a versatile nanocarrier for the effective skin delivery of drugs

BACKGROUND

Nanosponge, as a carrier for skin delivery system for drugs, plays a vital role. It not only serves to administer the drug to the targeted layer of skin but also increases the drug retention and deposition on the skin.

OBJECTIVE

In this review, we aim to highlight the effects of several process and formulation variables prompting the characteristics of various nanosponges for the delivery of drugs into/ across the skin.

METHOD

In the present review article, over-all introduction of nanosponges, its preparation, characterstics features, advanatges, disadvantages, factors affecting their preparation are covered. Furthermore, an elaborative description of nanosponges for skin delivery and its toxicological perspective with some referential examples of nanosponge drugs have also been deliberated here.

RESULTS

Factors associated with the formation of nanosponges can directly or indirectly affect its efficacy in skin delivery of drugs. These nanoforms are efficient in delivering the drugs which possess lower aqueous solubility, therefore, the aqueous solubility of drugs possessing a narrow therapeutic window can easily be enhanced. It also helps in achieving targeted drug delivery, controlled release of drugs, increases bioavailability, reduces drug toxicity, decreases drug degradation, and many more.

CONCLUSION

Nanosponges have been identified as a potential drug delivery carriers into as well as across skin. Delivery of biologics such as vaccines, enzymes, peptides, proteins, and antibodies, is also gaining attention in the recent past.

Cyclodextrin-Based Nanosponges: Overview and Opportunities

Nanosponges are solid cross-linked polymeric nano-sized porous structures. This broad concept involves, among others, metal organic frameworks and hydrogels. The focus of this manuscript is on cyclodextrin-based nanosponges. Cyclodextrins are cyclic oligomers of glucose derived from starch. The combined external hydrophilicity with the internal hydrophobic surface constitute a unique “microenvironment”, that confers cyclodextrins the peculiar ability to form inclusion host‒guest complexes with many hydrophobic substances. These complexes may impart beneficial modifications of the properties of guest molecules such as solubility enhancement and stabilization of labile guests. These properties complemented with the possibility of using different crosslinkers and high polymeric surface, make these sponges highly suitable for a large range of applications. Despite that, in the last 2 decades, cyclodextrin-based nanosponges have been developed for pharmaceutical and biomedical applications, taking advantage of the nontoxicity of cyclodextrins towards humans. This paper provides a critical and timely compilation of the contributions involving cyclodextrins nanosponges for those areas, but also paves the way for other important applications, including water and soil remediation and catalysis.

Nutraceutical Concepts and Dextrin-Based Delivery Systems

Nutraceuticals are bioactive or chemical compounds acclaimed for their valuable biological activities and health-promoting effects. The global community is faced with many health concerns such as cancers, cardiovascular and neurodegenerative diseases, diabetes, arthritis, osteoporosis, etc. The effect of nutraceuticals is similar to pharmaceuticals, even though the term nutraceutical has no regulatory definition. The usage of nutraceuticals, to prevent and treat the aforementioned diseases, is limited by several features such as poor water solubility, low bioavailability, low stability, low permeability, low efficacy, etc. These downsides can be overcome by the application of the field of nanotechnology manipulating the properties and structures of materials at the nanometer scale. In this review, the linear and cyclic dextrin, formed during the enzymatic degradation of starch, are highlighted as highly promising nanomaterials- based drug delivery systems. The modified cyclic dextrin, cyclodextrin (CD)-based nanosponges (NSs), are well-known delivery systems of several nutraceuticals such as quercetin, curcumin, resveratrol, thyme essential oil, melatonin, and appear as a more advanced drug delivery system than modified linear dextrin. CD-based NSs prolong and control the nutraceuticals release, and display higher biocompatibility, stability, and solubility of poorly water-soluble nutraceuticals than the CD-inclusion complexes, or uncomplexed nutraceuticals. In addition, the well-explored CD-based NSs pathways, as drug delivery systems, are described. Although important progress is made in drug delivery, all the findings will serve as a source for the use of CD-based nanosystems for nutraceutical delivery. To sum up, our review introduces the extensive literature about the nutraceutical concepts, synthesis, characterization, and applications of the CD-based nano delivery systems that will further contribute to the nutraceutical delivery with more potent nanosystems based on linear dextrins.

The ascension of nanosponges as a drug delivery carrier: preparation, characterization, and applications

Nanosponges are nanosized drug carriers with a three-dimensional structure created by crosslinking polymers. They have the advantage of being able to hold a wide range of drugs of various sizes. Nanosponges come in a variety of shapes and sizes. They are distinguished by the research method used, the type of polymer used, and the type of drug they may contain. Nanosponges are superior to other delivery systems because they can provide a controlled drug release pattern with targeted drug delivery. The period of action, as well as the drug's residence time, may be regulated. Since it is made of biodegradable materials, it has a low toxicity and is safe to use. The efficiency of drug encapsulation is determined by the size of the drug molecule and the amount of void space available. Cancer, enzyme and biocatalyst carrier, oxygen delivery, solubility enhancement, enzyme immobilization, and poison absorbent are some of the applications for nanosponges. The method of preparation, characterization, factors affecting nanosponge development, drug loading and release mechanism, recent developments in this area, and patents filed in the area of nanosponges are all highlighted in this study. Graphical abstract.

A Multifunctional Neutralizing Antibody-Conjugated Nanoparticle Inhibits and Inactivates SARS-CoV-2

The outbreak of 2019 coronavirus disease (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has resulted in a global pandemic. Despite intensive research, the current treatment options show limited curative efficacies. Here the authors report a strategy incorporating neutralizing antibodies conjugated to the surface of a photothermal nanoparticle (NP) to capture and inactivate SARS-CoV-2. The NP is comprised of a semiconducting polymer core and a biocompatible polyethylene glycol surface decorated with high-affinity neutralizing antibodies. The multifunctional NP efficiently captures SARS-CoV-2 pseudovirions and completely blocks viral infection to host cells in vitro through the surface neutralizing antibodies. In addition to virus capture and blocking function, the NP also possesses photothermal function to generate heat following irradiation for inactivation of virus. Importantly, the NPs described herein significantly outperform neutralizing antibodies at treating authentic SARS-CoV-2 infection in vivo. This multifunctional NP provides a flexible platform that can be readily adapted to other SARS-CoV-2 antibodies and extended to novel therapeutic proteins, thus it is expected to provide a broad range of protection against original SARS-CoV-2 and its variants.

Nanosponge Approach -A Plethora of Opportunities as a Promising Nanocarrier for Novel Drug Delivery

BACKGROUND

Nanotechnology is the need of the hour! The design of nanotechnologyaided carriers as a tool for the delivery of low solubility molecules offers a potential platform to overcome the issues of current clinical treatment and achieve good targeted release and bioaccessibility.

OBJECTIVE

Nanosponges (NS) encapsulate types of nanocarriers capable of carrying both lipophilic and hydrophilic substances. They are synthesized by mixing a solution of polyester, which is biodegradable, with cross-linkers. These tiny, porous structures are round-shaped, having multiple cavities wherein drugs can be housed to offer programmable release.

METHODS

The detailed literature review and patent search summarize the ongoing research on NS. Substances such as poorly soluble drugs, nutraceuticals, gases, proteins and peptides, volatile oils, genetic material, etc., can be loaded on these novel carriers, which are characterized using various analytical techniques. Target-specific drug delivery and controlled drug release are the advantages offered by NS, along with a myriad of other promising applications.

RESULTS

This review stresses the development of cyclodextrin-based NS, the synthetic methods and characterization of NS, along with factors affecting NS formation, their applications and information on the patented work in this area. NS are solid in character and can be formulated in various dosage forms, such as parenteral, topical, oral or inhalation.

CONCLUSION

Therefore, owing to their promising benefits over other nanocarriers in terms of drug loading, adaptability, sustainability, solubility and tailored release profile, NS is an immediate technological revolution for drug entrapment and as novel drug carriers.The authors expect that these fundamental applications of NS could help the researchers to develop and gain insight about NS in novel drug delivery applications.

Cyclodextrin-Containing Hydrogels: A Review of Preparation Method, Drug Delivery, and Degradation Behavior

Hydrogels possess porous structures, which are widely applied in the field of materials and biomedicine. As a natural oligosaccharide, cyclodextrin (CD) has shown remarkable application prospects in the synthesis and utilization of hydrogels. CD can be incorporated into hydrogels to form chemically or physically cross-linked networks. Furthermore, the unique cavity structure of CD makes it an ideal vehicle for the delivery of active ingredients into target tissues. This review describes useful methods to prepare CD-containing hydrogels. In addition, the potential biomedical applications of CD-containing hydrogels are reviewed. The release and degradation process of CD-containing hydrogels under different conditions are discussed. Finally, the current challenges and future research directions on CD-containing hydrogels are presented.

Evaluation and Characterization of Curcumin-β-Cyclodextrin and Cyclodextrin-Based Nanosponge Inclusion Complexation

Cyclodextrin polymers and cyclodextrin-based nanosponges have been widely investigated for increasing drug bioavailability. This study examined curcumin's complexation stability and solubilization with β-cyclodextrin and β-cyclodextrin-based nanosponge. Nanosponges were prepared through the cross-linking of β-cyclodextrin with different molar ratios of diphenyl carbonate. Phase solubility experiments were conducted to evaluate the formed complexes and evaluate the potential of using β-cyclodextrin and nanosponge in pharmaceutical formulations. Furthermore, physicochemical characterizations of the prepared complexes included PXRD, FTIR, NMR, and DSC. In addition, in vitro release studies were performed for the prepared formulations. The formation of β-cyclodextrin complexes enhanced curcumin solubility up to 2.34-fold compared to the inherent solubility, compared to a 2.95-fold increment in curcumin solubility when loaded in β-cyclodextrin-based nanosponges. Interestingly, the stability constant for curcumin nanosponges was (4972.90 M^-1), which was ten times higher than that for the β-cyclodextrin complex, where the value was 487.34 M^-1. The study results indicated a decrease in the complexation efficiency and solubilization effect with the increased cross-linker amount. This study's findings showed the potential of using cyclodextrin-based nanosponge and the importance of studying the effect of cross-linking density for the preparation of β-cyclodextrin-based nanosponges to be used for pharmaceutical formulations.

Antimicrobial Polymer-Based Hydrogels for the Intravaginal Therapies-Engineering Considerations

The review is focused on the hydrogel systems dedicated to the intravaginal delivery of antibacterial, antifungal and anti-Trichomonas vaginalis activity drugs for the treatment of gynaecological infections. The strategies for the enhancement of the hydrophobic drug solubility in the hydrogel matrix based on the formation of bigel systems and the introduction of nano- and microparticles as a drug reservoir are presented. Hydrogel carriers of natural and synthetic pharmacological substances, drug-free systems displaying antimicrobial activity thanks to the hydrogel building elements and systems combining the antimicrobial activity of both drug and polymer building components are distinguished. The design of hydrogels facilitating their administration and proper distribution in the vaginal mucosa and the vagina based on thermoresponsive systems capable of gelling at vaginal conditions and already-cross-linked injectable systems after reaching the yield stress are discussed. In addition, the mechanisms of hydrogel bioadhesion that regulate the retention time in the vagina are indicated. Finally, the prospects for the further development of hydrogel-based drug carriers in gynaecological therapies are highlighted.

Cyclodextrin Nanosponges Inclusion Compounds Associated with Gold Nanoparticles for Potential Application in the Photothermal Release of Melphalan and Cytoxan

This article describes the synthesis and characterization of β-cyclodextrin-based nano-sponges (NS) inclusion compounds (IC) with the anti-tumor drugs melphalan (MPH) and cytoxan (CYT), and the addition of gold nanoparticles (AuNPs) onto both systems, for the potential release of the drugs by means of laser irradiation. The NS-MPH and NS-CYT inclusion compounds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), UV-Vis, and proton nuclear magnetic resonance (1H-NMR). Thus, the inclusion of MPH and CYT inside the cavities of NSs was confirmed. The association of AuNPs with the ICs was confirmed by SEM, EDS, TEM, and UV-Vis. Drug release studies using NSs synthesized with different molar ratios of β-cyclodextrin and diphenylcarbonate (1:4 and 1:8) demonstrated that the ability of NSs to entrap and release the drug molecules depends on the crosslinking between the cyclodextrin monomers. Finally, irradiation assays using a continuous laser of 532 nm showed that photothermal drug release of both MPH and CYT from the cavities of NSs via plasmonic heating of AuNPs is possible.

Bio-Nanocarriers for Lung Cancer Management: Befriending the Barriers

Lung cancer is a complex thoracic malignancy developing consequential to aberrations in a myriad of molecular and biomolecular signaling pathways. It is one of the most lethal forms of cancers accounting to almost 1.8 million new annual incidences, bearing overall mortality to incidence ratio of 0.87. The dismal prognostic scenario at advanced stages of the disease and metastatic/resistant tumor cell populations stresses the requisite of advanced translational interdisciplinary interventions such as bionanotechnology. This review article deliberates insights and apprehensions on the recent prologue of nanobioengineering and bionanotechnology as an approach for the clinical management of lung cancer. The role of nanobioengineered (bio-nano) tools like bio-nanocarriers and nanobiodevices in secondary prophylaxis, diagnosis, therapeutics, and theranostics for lung cancer management has been discussed. Bioengineered, bioinspired, and biomimetic bio-nanotools of considerate translational value have been reviewed. Perspectives on existent oncostrategies, their critical comparison with bio-nanocarriers, and issues hampering their clinical bench side to bed transformation have also been summarized.

Cyclodextrins as carriers for volatile aroma compounds: A review

Cyclodextrins (CDs) are edible and biocompatible natural cyclic compounds that can encapsulate essential oils, flavours, volatile aroma compounds, and other substances. Complexation with CD-based materials improves the solubility and stability of volatile compounds and protects the bioactivity of the core materials. Therefore, the development of CD/volatile compound nanosystems is a key research area in the food, cosmetic, and pharmaceutical industries. This review briefly introduces the main types of natural CD; preparation methods of CD-based materials as carriers for aromatic substances or essential oils; characterisation methods used to calculate the interaction between CDs and volatile aroma compounds; molecular docking and simulation methods; and the application of CD-based nanosystems in different industries. The review aims to provide guidance for relevant practitioners in selecting appropriate CD materials and characterisation methods.

Nanotechnology-based antiviral therapeutics

The host immune system is highly compromised in case of viral infections and relapses are very common. The capacity of the virus to destroy the host cell by liberating its own DNA or RNA and replicating inside the host cell poses challenges in the development of antiviral therapeutics. In recent years, many new technologies have been explored for diagnosis, prevention, and treatment of viral infections. Nanotechnology has emerged as one of the most promising technologies on account of its ability to deal with viral diseases in an effective manner, addressing the limitations of traditional antiviral medicines. It has not only helped us to overcome problems related to solubility and toxicity of drugs, but also imparted unique properties to drugs, which in turn has increased their potency and selectivity toward viral cells against the host cells. The initial part of the paper focuses on some important proteins of influenza, Ebola, HIV, herpes, Zika, dengue, and corona virus and those of the host cells important for their entry and replication into the host cells. This is followed by different types of nanomaterials which have served as delivery vehicles for the antiviral drugs. It includes various lipid-based, polymer-based, lipid-polymer hybrid-based, carbon-based, inorganic metal-based, surface-modified, and stimuli-sensitive nanomaterials and their application in antiviral therapeutics. The authors also highlight newer promising treatment approaches like nanotraps, nanorobots, nanobubbles, nanofibers, nanodiamonds, nanovaccines, and mathematical modeling for the future. The paper has been updated with the recent developments in nanotechnology-based approaches in view of the ongoing pandemic of COVID-19.Graphical abstract.

Degree of crosslinking in β-cyclodextrin-based nanosponges and their effect on piperine encapsulation

Piperine (PIP) is an alkaloid which is potent as a therapeutic agent. However, its applications are restricted by its poor water solubility. Nanosponges (NS) derived from polymers are versatile carriers for poor water-soluble substances. The aim of this work was to synthesize β-cyclodextrin NS, by microwave-assisted fusion, for the encapsulation of PIP. Different formulations of NS were synthesized by varying the molar ratio of β-cyclodextrin:diphenyl carbonate (β-CD:DPC; 1:2, 1:6 and 1:10). NS specimens derived from 1:2, 1:6 and 1:10 β-CD:DPC molar ratios exhibited degree of substitution values of 0.345, 0.629 and 0.878, respectively. The crystallinity of NS was enhanced by increasing diphenyl carbonate concentration. A high degree of crosslinking in the NS increased the loading efficiency due to increased surface area available for bioactive inclusion. This study demonstrated the feasibility of synthesizing NS derived from β-cyclodextrin of high crystallinity for the encapsulation of PIP at high loading capacity.

Biological Effect Evaluation of Glutathione-Responsive Cyclodextrin-Based Nanosponges: 2D and 3D Studies

This study aims to evaluate the bioeffects of glutathione-responsive β-cyclodextrin-based nanosponges (GSH-NSs) on two- (2D) and three-dimensional (3D) cell cultures. The bioeffects of two types of GSH-NS formulations, with low (GSH-NS B) and high (GSH-NS D) disulfide-bond content, were evaluated on 2D colorectal (HCT116 and HT-29) and prostatic (DU-145 and PC3) cancer cell cultures. In particular, the cellular uptake of GSH-NS was evaluated, as their effects on cell growth, mitochondrial activity, membrane integrity, cell cycle distribution, mRNA expression, and reactive oxygen species production. The effect of GSH-NSs on cell growth was also evaluated on multicellular spheroids (MCS) and a comparison of the GSH-NS cell growth inhibitory activity, in terms of inhibition concentration (IC)₅₀ values, was performed between 2D and 3D cell cultures. A significant decrease in 2D cell growth was observed at high GSH-NS concentrations, with the formulation with a low disulfide-bond content, GSH-NS B, being more cytotoxic than the formulation with a high disulfide-bond content, GSH-NS D. The cell growth decrease induced by GSH-NS was owing to G₁ cell cycle arrest. Moreover, a significant down-regulation of mRNA expression of the cyclin genes CDK1, CDK2, and CDK4 and up-regulation of mRNA expression of the cyclin inhibitor genes CDKN1A and CDKN2A were observed. On the other hand, a significant decrease in MCS growth was also observed at high GSH-NS concentrations, but not influenced by the nanosponge disulfide-bond content, with the MCS IC₅₀ values being significantly higher than those obtained on 2D cell cultures. GSH-NSs are suitable nanocarries as they provoke limited cellular effects, as cell cycle arrest only occurred at concentrations significantly higher than those used for drug delivery.

Nanotechnology as a Platform for the Development of Injectable Parenteral Formulations: A Comprehensive Review of the Know-Hows and State of the Art

Within recent decades, the development of nanotechnology has made a significant contribution to the progress of various fields of study, including the domains of medical and pharmaceutical sciences. A substantially transformed arena within the context of the latter is the development and production of various injectable parenteral formulations. Indeed, recent decades have witnessed a rapid growth of the marketed and pipeline nanotechnology-based injectable products, which is a testimony to the remarkability of the aforementioned contribution. Adjunct to the ability of nanomaterials to deliver the incorporated payloads to many different targets of interest, nanotechnology has substantially assisted to the development of many further facets of the art. Such contributions include the enhancement of the drug solubility, development of long-acting locally and systemically injectable formulations, tuning the onset of the drug’s release through the endowment of sensitivity to various internal or external stimuli, as well as adjuvancy and immune activation, which is a desirable component for injectable vaccines and immunotherapeutic formulations. The current work seeks to provide a comprehensive review of all the abovementioned contributions, along with the most recent advances made within each domain. Furthermore, recent developments within the domains of passive and active targeting will be briefly debated.