Adipose-derived stem cells and BMP2: part 1. BMP2-treated adipose-derived stem cells do not improve repair of segmental femoral defects

Immunomodulatory strategies for bone regeneration: A review from the perspective of disease types

Tissue engineering strategies for treating bone loss to date have largely focused on targeting stem cells or vascularization. Immune cells, including macrophages and T cells, can also indirectly enhance bone healing via cytokine secretion to interact with other bone niche cells. Bone niche cues and local immune environment vary depending on anatomical location, size of defects and disease types. As such, it is critical to evaluate the role of the immune system in the context of specific bone niche and different disease types. This review focuses on immunomodulation research for bone applications using biomaterials and cell-based strategies, with a unique perspective from different disease types. We first reviewed applications for prolonging orthopaedic implant lifetime and enhancing fracture healing, two clinical challenges where immunomodulatory strategies were initially developed for orthopedic applications. We then reviewed recent research progress in harnessing immunomodulatory strategies for regenerating critical-sized, long bone or cranial bone defects, and treating osteolytic bone diseases. Remaining gaps in knowledge, future directions and opportunities were also discussed.

Current evidence on potential of adipose derived stem cells to enhance bone regeneration and future projection

Injuries to the postnatal skeleton are naturally repaired through successive steps involving specific cell types in a process collectively termed “bone regeneration”. Although complex, bone regeneration occurs through a series of well-orchestrated stages wherein endogenous bone stem cells play a central role. In most situations, bone regeneration is successful; however, there are instances when it fails and creates non-healing injuries or fracture nonunion requiring surgical or therapeutic interventions. Transplantation of adult or mesenchymal stem cells (MSCs) defined by the International Society for Cell and Gene Therapy (ISCT) as CD105+CD90+CD73+CD45-CD34-CD14orCD11b-CD79αorCD19-HLA-DR- is being investigated as an attractive therapy for bone regeneration throughout the world. MSCs isolated from adipose tissue, adipose-derived stem cells (ADSCs), are gaining increasing attention since this is the most abundant source of adult stem cells and the isolation process for ADSCs is straightforward. Currently, there is not a single Food and Drug Administration (FDA) approved ADSCs product for bone regeneration. Although the safety of ADSCs is established from their usage in numerous clinical trials, the bone-forming potential of ADSCs and MSCs, in general, is highly controversial. Growing evidence suggests that the ISCT defined phenotype may not represent bona fide osteoprogenitors. Transplantation of both ADSCs and the CD105^- sub-population of ADSCs has been reported to induce bone regeneration. Most notably, cells expressing other markers such as CD146, AlphaV, CD200, PDPN, CD164, CXCR4, and PDGFRα have been shown to represent osteogenic sub-population within ADSCs. Amongst other strategies to improve the bone-forming ability of ADSCs, modulation of VEGF, TGF-β1 and BMP signaling pathways of ADSCs has shown promising results. The U.S. FDA reveals that 73% of Investigational New Drug applications for stem cell-based products rely on CD105 expression as the “positive” marker for adult stem cells. A concerted effort involving the scientific community, clinicians, industries, and regulatory bodies to redefine ADSCs using powerful selection markers and strategies to modulate signaling pathways of ADSCs will speed up the therapeutic use of ADSCs for bone regeneration.

Calvarial Versus Long Bone: Implications for Tailoring Skeletal Tissue Engineering

Tissue-engineered graft substitutes have shown great potential to treat large bone defects. While we usually assume that therapeutic approaches developed for appendicular bone healing could be similarly translated for application in craniofacial reconstruction and vice versa, this is not necessarily accurate. In addition to those more well-known healing-associated factors, such as age, lifestyle (e.g., nutrition and smoking), preexisting disease (e.g., diabetes), medication, and poor blood supply, the developmental origins and surrounding tissue of the wound sites can largely affect the fracture healing outcome as well as designed treatments. Therefore, the strategies developed for long bone fracture repair might not be suitable or directly applicable to skull bone repair. In this review, we discuss aspects of development, healing process, structure, and tissue engineering considerations between calvarial and long bones to assist in designing the tailored bone repair strategies. Impact Statement We summarized, in this review, the existing body of knowledge between long bone and calvarial bone with regard to their development and healing, tissue structure, and consideration of current tissue engineering strategies. By highlighting their similarities and differences, we propose that tailored tissue engineering strategies, such as scaffold features, growth factor usage, and the source of cells for tissue or region-specific bone repair, are necessary to ensure an optimized healing outcome.

Mesenchymal stem cells and biologic factors leading to bone formation

BACKGROUND

Physiological bone formation and bone regeneration occurring during bone repair can be considered distinct but similar processes. Mesenchymal stem cells (MSC) and associated biologic factors are crucial to both bone formation and bone regeneration.

AIM

To perform a narrative review of the current literature regarding the role of MSC and biologic factors in bone formation with the aim of discussing the clinical relevance of in vitro and in vivo animal studies.

METHODS

The literature was searched for studies on MSC and biologic factors associated with the formation of bone in the mandible and maxilla. The search specifically targeted studies on key aspects of how stem cells and biologic factors are important in bone formation and how this might be relevant to bone regeneration. The results are summarized in a narrative review format.

RESULTS

Different types of MSC and many biologic factors are associated with bone formation in the maxilla and mandible.

CONCLUSION

Bone formation and regeneration involve very complex and highly regulated cellular and molecular processes. By studying these processes, new clinical opportunities will arise for therapeutic bone regenerative treatments.

Bioengineering strategies for bone and cartilage tissue regeneration using growth factors and stem cells

Bone and cartilage tissue engineering is an integrative approach that is inspired by the phenomena associated with wound healing. In this respect, growth factors have emerged as important moieties for the control and regulation of this process. Growth factors act as mediators and control the important physiological functions of bone regeneration. Herein, we discuss the importance of growth factors in bone and cartilage tissue engineering, their loading and delivery strategies, release kinetics, and their integration with biomaterials and stem cells to heal bone fractures. We also highlighted the role of growth factors in the determination of the bone tissue microenvironment based on the reciprocal signaling with cells and biomaterial scaffolds on which future bone and cartilage tissue engineering technologies and medical devices will be based upon.

Bone Tissue Engineering Using Human Cells: A Comprehensive Review on Recent Trends, Current Prospects, and Recommendations

The use of proper cells for bone tissue engineering remains a major challenge worldwide. Cells play a pivotal role in the repair and regeneration of the bone tissue in vitro and in vivo. Currently, a large number of differentiated (somatic) and undifferentiated (stem) cells have been used for bone reconstruction alone or in combination with different biomaterials and constructs (e.g., scaffolds). Although the results of the cell transplantation without any supporting or adjuvant material have been very effective with regard to bone healing. Recent advances in bone scaffolding are now becoming new players affecting the osteogenic potential of cells. In the present study, we have critically reviewed all the currently used cell sources for bone reconstruction and discussed the new horizons that are opening up in the context of cell-based bone tissue engineering strategies.

MAPK signaling has stage-dependent osteogenic effects on human adipose-derived stem cells in vitro

OVERVIEW

The use of pro-osteogenic growth factors, such as BMP2, in human adipose-derived stem cell (ASC) osteogenesis is well described. Because these growth factors work via signal transduction pathways, such as the mitogen-activated protein kinase (MAPK) cascade, a study of the relationship between MAPK signaling and ASC osteogenesis was conducted.

MATERIALS AND METHODS

ERK, JNK, and p38MAPK activation were measured in ASCs osteo-induced using either dexamethasone or vitamin D3 and correlated with mineralization. Activation and mineralization were also measured without dexamethasone or using the glucocorticoid, cortisone. The expression of the MAPK phosphatase, MKP1, and its relationship to mineralization was also assessed. The effect of decreasing MAPK activation on mineralization through the use of exogenous inhibitors was examined along with siRNA-knockdown and adenoviral overexpression of ERK1/2. Finally, the effect of ERK1/2 overexpression on ASCs induced on PLGA scaffolds was assessed.

RESULTS

ASC mineralization in dexamethasone or vitamin D3-induced ASCs correlated with both increased ERK1/2 and JNK1/2 activation. ASCs induced without dexamethasone also mineralized, with JNK1/2 signaling possibly mediating this event. No link between cortisone induction and MAPK signaling could be ascertained. ASCs treated with ERK, JNK, or p38MAPK inhibitors showed decreased osteogenic gene expression and diminished mineralization. Mineralization levels were also affected by viruses designed to inhibit or augment ERK1/2 expression and activity. Finally, ASC mineralization appeared to be a balance between the MAPK kinase activity and MKP1.

CONCLUSIONS

It is likely that MAPK signaling plays a significant role in ASC osteogenesis, affecting differentiation in kinase- and stage-specific manners.

Buccal Fat Pad as a Potential Source of Stem Cells for Bone Regeneration: A Literature Review

Adipose tissues hold great promise in bone tissue engineering since they are available in large quantities as a waste material. The buccal fat pad (BFP) is a specialized adipose tissue that is easy to harvest and contains a rich blood supply, and its harvesting causes low complications for patients. This review focuses on the characteristics and osteogenic capability of stem cells derived from BFP as a valuable cell source for bone tissue engineering. An electronic search was performed on all in vitro and in vivo studies that used stem cells from BFP for the purpose of bone tissue engineering from 2010 until 2016. This review was organized according to the PRISMA statement. Adipose-derived stem cells derived from BFP (BFPSCs) were compared with adipose tissues from other parts of the body (AdSCs). Moreover, the osteogenic capability of dedifferentiated fat cells (DFAT) derived from BFP (BFP-DFAT) has been reported in comparison with BFPSCs. BFP is an easily accessible source of stem cells that can be obtained via the oral cavity without injury to the external body surface. Comparing BFPSCs with AdSCs indicated similar cell yield, morphology, and multilineage differentiation. However, BFPSCs proliferate faster and are more prone to producing colonies than AdSCs.

Adipose-derived stem cell therapies for bone regeneration

INTRODUCTION

Cell-based therapies exploit the heterogeneous and self-sufficient biological environment of stem cells to restore, maintain and improve tissue functions. Adipose-derived stem cells (ASCs) are, to this aim, promising cell types thanks to advantageous isolation procedures, growth kinetics, plasticity and trophic properties. Specifically, bone regeneration represents a suitable, though often challenging, target setting to test and apply ASC-based therapeutic strategies. Areas covered: ASCs are extremely plastic and secrete bioactive peptides that mediate paracrine functions, mediating their trophic actions in vivo. Numerous preclinical studies demonstrated that ASCs improve bone healing. Clinical trials are ongoing to validate the clinical feasibility of these approaches. This review is intended to define the state-of-the-art on ASCs, encompassing the biological features that make them suitable for bone regenerative strategies, and to provide an update on existing preclinical and clinical applications. Expert opinion: ASCs offer numerous advantages over other stem cells in terms of feasibility of clinical translation. Data obtained from in vivo experimentation are encouraging, and clinical trials are ongoing. More robust validations are thus expected to be achieved during the next few years, and will likely pave the way to optimized patient-tailored treatments for bone regeneration.

Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Application of platelet-rich plasma with stem cells in bone and periodontal tissue engineering

Presently, there is a high paucity of bone grafts in the United States and worldwide. Regenerating bone is of prime concern due to the current demand of bone grafts and the increasing number of diseases causing bone loss. Autogenous bone is the present gold standard of bone regeneration. However, disadvantages like donor site morbidity and its decreased availability limit its use. Even allografts and synthetic grafting materials have their own limitations. As certain specific stem cells can be directed to differentiate into an osteoblastic lineage in the presence of growth factors (GFs), it makes stem cells the ideal agents for bone regeneration. Furthermore, platelet-rich plasma (PRP), which can be easily isolated from whole blood, is often used for bone regeneration, wound healing and bone defect repair. When stem cells are combined with PRP in the presence of GFs, they are able to promote osteogenesis. This review provides in-depth knowledge regarding the use of stem cells and PRP in vitro, in vivo and their application in clinical studies in the future.

Suppression of osteoblast-related genes during osteogenic differentiation of adipose tissue derived stromal cells

Recent studies indicated a lower osteogenic differentiation potential of adipose tissue-derived stromal cells (ASCs) compared to bone marrow derived mesenchymal stromal cells. The aim of this study was to evaluate the effects of potent combinations of highly osteogenic bone morphogenetic proteins (BMPs) in order to enhance the osteogenic differentiation potential of ASCs. Human ASCs were cultured for 10 days in the presence of osteogenic medium consisting of dexamethasone, ß-glycerophosphate and ascorbat-2-phosphate (OM) supplemented with BMP-2, BMP-6, BMP-9+IGF-2 and BMP-2,-6,-9 (day 1+2: 50 ng/ml, days 3-6: 100 ng/ml, days 7-10: 200 ng/ml). The formation of the osteoblast phenotype was evaluated by quantification of osteoblast-related marker genes using real-time polymerase chain reaction (RT-PCR). Matrix mineralization was assessed by Alizarin Red S staining. Statistical analysis was carried out using the one-way analysis of variance (ANOVA) followed by the Scheffe's post hoc procedure. Osteogenic medium (OM) significantly increased the expression of alkaline phosphatase (ALP) and osteocalcin (p < 0.05) and led to a stable matrix mineralization. Under the influence of BMP-9+IGF-2 and BMP-2,-6,-9 the ALP expression further increased compared to ASCs cultured with OM only (p < 0.01). However, multiple osteogenic markers showed no change or decreased under the influence of OM and BMP combinations (p < 0.05). The current results indicate a restricted osteogenic differentiation potential of ASCs and suggest careful reconsideration of their use in bone tissue engineering applications.

Overcoming physical constraints in bone engineering: ‘the importance of being vascularized’

Bone plays several physiological functions and is the second most commonly transplanted tissue after blood. Since the treatment of large bone defects is still unsatisfactory, researchers have endeavoured to obtain scaffolds able to release growth and differentiation factors for mesenchymal stem cells, osteoblasts and endothelial cells in order to obtain faster mineralization and prompt a reliable vascularization. Nowadays, the application of osteoblastic cultures spans from cell physiology and pharmacology to cytocompatibility measurement and osteogenic potential evaluation of novel biomaterials. To overcome the simple traditional monocultures in vitro, co-cultures of osteogenic and vasculogenic precursors were introduced with very interesting results. Increasingly complex culture systems have been developed, where cells are seeded on proper scaffolds and stimulated so as to mimic the physiological conditions more accurately. These bioreactors aim at enabling bone regeneration by incorporating different cells types into bio-inspired materials within a surveilled habitat. This review is focused on the most recent developments in the organomimetic cultures of osteoblasts and vascular endothelial cells for bone tissue engineering.

Bone Morphogenetic Protein-2 Induces Donor-Dependent Osteogenic and Adipogenic Differentiation in Human Adipose Stem Cells

Bone morphogenetic protein-2 (BMP-2) is a growth factor used to stimulate bone regeneration in clinical applications. However, there are contradicting reports on the functionality of BMP-2 in human adipose stem cells (hASCs), which are frequently used in tissue engineering. In this study, we analyzed the effects of BMP-2 on SMAD1/5 signaling, proliferation, and differentiation in hASCs. Our results indicated that BMP-2 induced dose-dependent (25-100 ng/ml) activation of SMAD signaling. Furthermore, the cell proliferation analysis revealed that BMP-2 (100 ng/ml) consistently decreased the proliferation in all the cell lines studied. However, the analysis of the differentiation potential revealed that BMP-2 (100 ng/ml) exhibited a donor-dependent dual role, inducing both osteogenic and adipogenic differentiation in hASCs. The quantitative alkaline phosphatase (qALP) activity and mineralization levels were clearly enhanced in particular donor cell lines by BMP-2 stimulus. On the contrary, in other cell lines, qALP and mineralization levels were diminished and the lipid formation was enhanced. The current study also suggests that hASCs have accelerated biochemical responsiveness to BMP-2 stimulus in human serum-supplemented culture medium compared with fetal bovine serum. The production origin of the BMP-2 growth factor is also important for its response: BMP-2 produced in mammalian cells enhanced signaling and differentiation responses compared with BMP-2 produced in Escherichia coli. These results explain the existing contradiction in the reported BMP-2 studies and indicate the variability in the functional end mechanism of BMP-2-stimulated hASCs.

SIGNIFICANCE

This study examined how bone morphogenetic protein-2 (BMP-2) modulates the SMAD signaling mechanism and the proliferation and differentiation outcome of human adipose stem cells (hASCs) derived from several donors. The results indicate that BMP-2 triggers molecular SMAD signaling mechanisms in hASCs and regulates differentiation processes in human serum-culture conditions. Importantly, BMP-2 has dual activity, inducing osteogenic and adipogenic differentiation, subject to hASC donor line studied. These findings explain contradictory previous results and highlight the importance of further studies to understand how signaling pathways guide mesenchymal stem cell functions at the molecular level.

Effects of heterodimeric bone morphogenetic protein-2/7 on osteogenesis of human adipose-derived stem cells

OBJECTIVE

Roles of bone morphogenetic proteins (BMPs) on osteogenesis of human adipose-derived stem cells (hASCs) remain ambiguous. In this study, we evaluated in vitro and in vivo functional characteristics of BMPs of different dimerization types, with the aim of determining osteoinductive efficiency of heterodimeric BMP-2/7 on osteogenesis of hASCs.

MATERIALS AND METHODS

We explored osteoinductive effects of three different BMPs by using cell DNA assay, alkaline phosphatase (ALP) activity assay, alizarin red staining and mineralization assay, and real-time PCR, in vitro. Also, we examined ectopic bone formation in nude mice by using soft X-ray, histomorphometric and immunohistochemical analyses in vivo.

RESULTS

In our dose-response study, we showed that BMPs with both dimerization types did not induce in vitro osteogenesis of hASCs without osteogenic medium (OM). In the presence of OM, BMPs significantly enhanced hASC osteogenesis in a dose-dependent manner. In in vivo experiments, our analyses indicated that BMPs promoted osteogenesis of hASCs without in vitro osteogenic induction. However, both in vitro and in vivo, there were no significant differences in hASC osteogenic induction between heterodimeric and homodimeric BMPs.

CONCLUSIONS

Heterodimeric BMP-2/7 significantly promoted osteogenesis of hASCs in vitro and in vivo. However, BMP-2/7 was not found to be a stronger inducer of osteogenesis compared to homodimeric either BMP-2 or BMP-7.

Bone morphogenetic protein-2 and vascular endothelial growth factor in bone tissue regeneration: new insight and perspectives

The study of bone tissue regeneration in orthopaedic diseases has stimulated great interest among bone tissue engineering specialists and orthopaedic surgeons. Combinations of biomaterials, growth factors and stem cells for repairing bone have been much studied and researched, yet remain a challenge for both scientists and clinicians pursuing regenerative medicine. The purpose of this review was to elucidate the role of sequential release of bone morphogenetic protein-2 and vascular endothelial growth factor in producing better outcomes in the field of bone tissue regeneration.

Expression of CD105 and CD34 receptors controls BMP-induced in vitro mineralization of mouse adipose-derived stem cells but does not predict their in vivo bone-forming potential

Adipose-derived stem cells (ADSCs) can be excellent alternative to bone marrow derived stem cells for enhancing fracture repair since ADSCs can be isolated comparatively in large numbers from discarded lipoaspirates. However, osteogenic potential of ADSCs in vivo is very controversial. We hypothesized that adipose-derived stem cells (ADSCs) that respond maximally to bone morphogenetic proteins (BMPs) in vitro would possess maximum bone-forming potential. Four purified populations of mouse ADSCs: CD105(+) CD34(+), CD105(-) CD34(-), CD105(+) CD34(-) and CD105(-) CD34(+) were obtained using fluorescence-activated cell sorting (FACS) and their BMP-responsiveness was determined in vitro. CD105(+) CD34(-) population showed the strongest response to BMPs in terms of robust increase in mineralization. Expression of CD105 correlated with high BMP-responsive phenotype and larger cell size while expression of CD34 correlated with low BMP-responsive phenotype and smaller cell size. CD105(+) CD34(-) population displayed higher gene expression of Alk1 or Alk6 receptors in comparison with other populations. However, CD105(+) CD34(-) ADSCs failed to induce ectopic bone formation in vivo after they were transplanted into syngeneic mice, indicating that in vitro BMP-responsiveness is not a good indicator to predict in vivo bone forming potential of ADSCs. Therefore greater precautions should be executed during selection of competent ADSCs for bone repair.

Long-term tracking of segmental bone healing mediated by genetically engineered adipose-derived stem cells: focuses on bone remodeling and potential side effects

We previously showed that transplantation of adipose-derived stem cells (ASCs) engineered with hybrid baculovirus (BV) persistently expressing bone morphogenetic protein 2 (BMP2)/vascular endothelial growth factor (VEGF) into segmental defects in New Zealand White (NZW) rabbits led to successful defect reunion. By using microcomputed tomography and histology, here we further demonstrated that transplanting the hybrid BV-engineered ASCs into the massive defects (10 mm in length) at the femoral diaphysis of NZW rabbits resulted in trabecular bone formation in the interior via endochondral ossification and bone remodeling at 3 months post-transplantation. The progression of bone remodeling gave rise to the resorption of trabecular bone and conspicuous reconstruction of medullary cavity and cortical bone with lamellar structure at 8 months post-transplantation, hence conferring mechanical properties that were comparable to those of nonoperated femora. Importantly, X-ray, positron emission tomography/computed tomography scans, and histopathology revealed no signs of heterotopic bone formation and tumor formation. These data altogether attested that the genetically engineered ASCs and prolonged BMP2/VEGF expression not only healed and remodeled the stringent segmental defects, but also revitalized the defects into living bone tissues that structurally and biomechanically resembled intact bones without appreciable side effects, making it one step closer to translate this technology to the clinical setting.

Antioxidative fullerol promotes osteogenesis of human adipose-derived stem cells

Antioxidants were implicated as potential reagents to enhance osteogenesis, and nano-fullerenes have been demonstrated to have a great antioxidative capacity by both in vitro and in vivo experiments. In this study, we assessed the impact of a polyhydroxylated fullerene, fullerol, on the osteogenic differentiation of human adipose-derived stem cells (ADSCs). Fullerol was not toxic against human ADSCs at concentrations up to 10 μM. At a concentration of 1 μM, fullerol reduced cellular reactive oxygen species after a 5-day incubation either in the presence or in the absence of osteogenic media. Pretreatment of fullerol for 7 days increased the osteogenic potential of human ADSCs. Furthermore, when incubated together with osteogenic medium, fullerol promoted osteogenic differentiation in a dose-dependent manner. Finally, fullerol proved to promote expression of FoxO1, a major functional isoform of forkhead box O transcription factors that defend against reactive oxygen species in bone. Although further clarification of related mechanisms is required, the findings may help further development of a novel approach for bone repair, using combined treatment of nano-fullerol with ADSCs.

Pulsed electromagnetic fields stimulate osteogenic differentiation in human bone marrow and adipose tissue derived mesenchymal stem cells

Pulsed electromagnetic fields (PEMFs) play a regulatory role on osteoblast activity and are clinically beneficial during fracture healing. Human mesenchymal stem cells (MSCs) derived from different sources have been extensively used in bone tissue engineering. Compared with MSCs isolated from bone marrow (BMSCs), those derived from adipose tissue (ASCs) are easier to obtain and available in larger amounts, although they show a less osteogenic differentiation potential than BMSCs. The hypothesis tested in this study was to evaluate whether PEMFs favor osteogenic differentiation both in BMSCs and in ASCs and to compare the role of PEMFs alone and in combination with the biochemical osteogenic stimulus bone morphogenetic protein (BMP)-2. Early and later osteogenic markers, such as alkaline phosphatase (ALP) activity, osteocalcin levels, and matrix mineralization, were analyzed at different times during osteogenic differentiation. Results showed that PEMFs induced osteogenic differentiation by increasing ALP activity, osteocalcin, and matrix mineralization in both BMSCs and ASCs, suggesting that PEMF activity is maintained during the whole differentiation period. The addition of BMP-2 in PEMF exposed cultures further increased all the osteogenic markers in BMSCs, while in ASCs, the stimulatory role of PEMFs was independent of BMP-2. Our results indicate that PEMFs may stimulate an early osteogenic induction in both BMSCs and ASCs and they suggest PEMFs as a bioactive factor to enhance the osteogenesis of ASCs, which are an attractive cell source for clinical applications. In conclusion, PEMFs may be considered a possible tool to improve autologous cell-based regeneration of bone defects in orthopedics.

Adipose-derived stem cells and BMP-2 delivery in chitosan-based 3D constructs to enhance bone regeneration in a rat mandibular defect model

Reconstructing segmental mandiblular defects remains a challenge in the clinic. Tissue engineering strategies provide an alternative option to resolve this problem. The objective of the present study was to determine the effects of adipose-derived stem cells (ASCs) and bone morphogenetic proteins-2 (BMP-2) in three-dimensional (3D) scaffolds on mandibular repair in a small animal model. Noggin expression levels in ASCs were downregulated by a lentiviral short hairpin RNA strategy to enhance ASC osteogenesis (ASCs(Nog-)). Chitosan (CH) and chondroitin sulfate (CS), natural polysaccharides, were fabricated into 3D porous scaffolds, which were further modified with apatite coatings for enhanced cellular responses and efficient delivery of BMP-2. The efficacy of 3D apatite-coated CH/CS scaffolds supplemented with ASCs(Nog-) and BMP-2 were evaluated in a rat critical-sized mandibular defect model. After 8 weeks postimplantation, the scaffolds treated with ASCs(Nog-) and BMP-2 significantly promoted rat mandibular regeneration as demonstrated by micro-computerized tomography, histology, and immunohistochemistry, compared with the groups treated with ASCs(Nog-) or BMP-2 alone. These results suggest that our combinatorial strategy of ASCs(Nog-)+BMP-2 in 3D apatite microenvironments can significantly promote mandibular regeneration, and these may provide a potential tissue engineering approach to repair large bony defects.

BMP-non-responsive Sca1+ CD73+ CD44+ mouse bone marrow derived osteoprogenitor cells respond to combination of VEGF and BMP-6 to display enhanced osteoblastic differentiation and ectopic bone formation

Clinical trials on fracture repair have challenged the effectiveness of bone morphogenetic proteins (BMPs) but suggest that delivery of mesenchymal stem cells (MSCs) might be beneficial. It has also been reported that BMPs could not increase mineralization in several MSCs populations, which adds ambiguity to the use of BMPs. However, an exogenous supply of MSCs combined with vascular endothelial growth factor (VEGF) and BMPs is reported to synergistically enhance fracture repair in animal models. To elucidate the mechanism of this synergy, we investigated the osteoblastic differentiation of cloned mouse bone marrow derived MSCs (D1 cells) in vitro in response to human recombinant proteins of VEGF, BMPs (-2, -4, -6, -9) and the combination of VEGF with BMP-6 (most potent BMP). We further investigated ectopic bone formation induced by MSCs pre-conditioned with VEGF, BMP-6 or both. No significant increase in mineralization, phosphorylation of Smads 1/5/8 and expression of the ALP, COL1A1 and osterix genes was observed upon addition of VEGF or BMPs alone to the cells in culture. The lack of CD105, Alk1 and Alk6 expression in D1 cells correlated with poor response to BMPs indicating that a greater care in the selection of MSCs is necessary. Interestingly, the combination of VEGF and BMP-6 significantly increased the expression of ALP, COL1A1 and osterix genes and D1 cells pre-conditioned with VEGF and BMP-6 induced greater bone formation in vivo than the non-conditioned control cells or the cells pre-conditioned with either VEGF or BMP-6 alone. This enhanced bone formation by MSCs correlated with higher CADM1 expression and OPG/RANKL ratio in the implants. Thus, combined action of VEGF and BMP on MSCs enhances osteoblastic differentiation of MSCs and increases their bone forming ability, which cannot be achieved through use of BMPs alone. This strategy can be effectively used for bone repair.

Adipose-derived stem cells: a review of signaling networks governing cell fate and regenerative potential in the context of craniofacial and long bone skeletal repair

Improvements in medical care, nutrition and social care are resulting in a commendable change in world population demographics with an ever increasing skew towards an aging population. As the proportion of the world's population that is considered elderly increases, so does the incidence of osteodegenerative disease and the resultant burden on healthcare. The increasing demand coupled with the limitations of contemporary approaches, have provided the impetus to develop novel tissue regeneration therapies. The use of stem cells, with their potential for self-renewal and differentiation, is one potential solution. Adipose-derived stem cells (ASCs), which are relatively easy to harvest and readily available have emerged as an ideal candidate. In this review, we explore the potential for ASCs to provide tangible therapies for craniofacial and long bone skeletal defects, outline key signaling pathways that direct these cells and describe how the developmental signaling program may provide clues on how to guide these cells in vivo. This review also provides an overview of the importance of establishing an osteogenic microniche using appropriately customized scaffolds and delineates some of the key challenges that still need to be overcome for adult stem cell skeletal regenerative therapy to become a clinical reality.

Adipose-derived stromal cells for osteoarticular repair: trophic function versus stem cell activity

The identification of multipotent adipose-derived stromal cells (ASC) has raised hope that tissue regeneration approaches established with bone-marrow-derived stromal cells (BMSC) can be reproduced with a cell-type that is far more accessible in large quantities. Recent detailed comparisons, however, revealed subtle functional differences between ASC and BMSC, stressing the concept of a common mesenchymal progenitor existing in a perivascular niche across all tissues. Focussing on bone and cartilage repair, this review summarises recent in vitro and in vivo studies aiming towards tissue regeneration with ASC. Advantages of good accessibility, high yield and superior growth properties are counterbalanced by an inferiority of ASC to form ectopic bone and stimulate long-bone healing along with their less pronounced osteogenic and angiogenic gene expression signature. Hence, particular emphasis is placed on establishing whether stem cell activity of ASC is so far proven and relevant for successful osteochondral regeneration, or whether trophic activity may largely determine therapeutic outcome.

Adipose-derived mesenchymal cells for bone regereneration: state of the art

Adipose tissue represents a hot topic in regenerative medicine because of the tissue source abundance, the relatively easy retrieval, and the inherent biological properties of mesenchymal stem cells residing in its stroma. Adipose-derived mesenchymal stem cells (ASCs) are indeed multipotent somatic stem cells exhibiting growth kinetics and plasticity, proved to induce efficient tissue regeneration in several biomedical applications. A defined consensus for their isolation, classification, and characterization has been very recently achieved. In particular, bone tissue reconstruction and regeneration based on ASCs has emerged as a promising approach to restore structure and function of bone compromised by injury or disease. ASCs have been used in combination with osteoinductive biomaterial and/or osteogenic molecules, in either static or dynamic culture systems, to improve bone regeneration in several animal models. To date, few clinical trials on ASC-based bone reconstruction have been concluded and proved effective. The aim of this review is to dissect the state of the art on ASC use in bone regenerative applications in the attempt to provide a comprehensive coverage of the topics, from the basic laboratory to recent clinical applications.

Adipose tissue-derived mesenchymal stem cells as monocultures or cocultures with human umbilical vein endothelial cells: performance in vitro and in rat cranial defects

The aim of this study was to compare the osteogenic capacity between human adipose tissue-derived mesenchymal stem cells (AT-MSCs) and their cocultures with human umbilical vein endothelial cells (HUVECs) in vitro and their biological performance in vivo. First, the optimal cell ratio in cocultures for osteogenic differentiation was determined by seeding AT-MSCs and HUVECs in ratios varying from 100:0 to 0:100 on tissue culture plates. Afterward, AT-MSCs and AT-MSCs/HUVECs (50:50) were seeded on porous titanium fiber mesh scaffolds (Ti) for both in vitro and in vivo osteogenic evaluation. For in vitro evaluation, cell osteogenic differentiation was assessed by alkaline phosphatase (ALP) activity and calcium assay. For in vivo evaluation, the scaffolds were implanted bilaterally into rat cranial defects (5 mm diameter) and bone formation was assessed histologically and histomorphometrically after 8 weeks. The ratio of 50:50 was chosen in the cocultures because this coculture condition retained similar amount of calcium deposition while using the least amount of AT-MSCs. Moreover, AT-MSCs showed higher osteogenic differentiation in comparison to AT-MSCs/HUVECs on Ti in vitro. Furthermore, superior bone formation was observed in AT-MSCs compared to AT-MSCs/HUVECs in rat cranial defects. In conclusion, AT-MSCs showed significantly higher osteogenic potential compared to AT-MSCs/HUVECs both in vitro and in vivo.

Addition of bone morphogenetic protein type 2 to ascorbate and β-glycerophosphate supplementation did not enhance osteogenic differentiation of human adipose-derived stem cells

Bone morphogenetic protein type 2 (BMP-2) is a potent local factor, which promotes bone formation and has been used as an osteogenic supplement for mesenchymal stem cells.

Adipose-Derived Stem Cells in Tissue Regeneration: A Review

In 2001, researchers at the University of California, Los Angeles, described the isolation of a new population of adult stem cells from liposuctioned adipose tissue. These stem cells, now known as adipose-derived stem cells or ADSCs, have gone on to become one of the most popular adult stem cells populations in the fields of stem cell research and regenerative medicine. As of today, thousands of research and clinical articles have been published using ASCs, describing their possible pluripotency in vitro, their uses in regenerative animal models, and their application to the clinic. This paper outlines the progress made in the ASC field since their initial description in 2001, describing their mesodermal, ectodermal, and endodermal potentials both in vitro and in vivo, their use in mediating inflammation and vascularization during tissue regeneration, and their potential for reprogramming into induced pluripotent cells.

Precise control of osteogenesis for craniofacial defect repair: the role of direct osteoprogenitor contact in BMP-2-based bioprinting

BACKGROUND

Success with bone morphogenetic protein-2 (BMP-2) has been widely reported in the osseous reconstruction of large calvarial defects. These efforts have required enormous doses of BMP-2 and are not sufficiently refined to facilitate the detail-oriented repair required for intricate craniofacial structures. We have previously shown that inkjet-based bioprinting technologies allow for precisely customized low-dose protein patterns to induce spatially regulated osteogenesis. Here, we investigate the importance of direct contact between bioprinted BMP-2 and the dura mater (a source of osteoprogenitors) in mediating calvarial healing.

METHODS

Five-millimeter osseous defects were trephinated in mouse parietal bones (N=8). Circular acellular dermal matrix (ADM) implants were prepared such that 1 semicircle of 1 face per implant was printed with BMP-2 bio-ink. These implants were then placed ink-toward (N=3) or ink-away (N=5) from the underlying dura mater. After 4 weeks, osteogenesis was assessed in each of the 4 possible positions (BMP-2-printed area toward dura, BMP-2-printed area away from dura, unprinted area toward dura, and unprinted area away from dura) by faxitron.

RESULTS

The BMP-2-printed portion of the ADM generated bone covering an average of 66.5% of its surface area when it was face-down (printed surface directly abutting dura mater). By comparison, the BMP-2-printed portion of the ADM generated bone covering an average of only 21.3% of its surface area when it was face-up (printed surface away from dura). Similarly, the unprinted portion of the ADM generated an average of only 18.6% osseous coverage when face-down and 18.4% when face-up.

CONCLUSIONS

We have previously shown that inkjet-based bioprinting has the potential to significantly enhance the role of regenerative therapies in craniofacial surgery. This technology affords the precise control of osteogenesis necessary to reconstruct this region's intricate anatomical architecture. In the present study, we demonstrate that direct apposition of BMP-2-printed ADM to a source of osteoprogenitor cells (in this case dura mater) is necessary for bio-ink-directed osteogenesis to occur. These results have important implications for the design of more complex bioprinted osseous structures.

Effects of bioactive glass S53P4 or beta-tricalcium phosphate and bone morphogenetic protein-2 and bone morphogenetic protein-7 on osteogenic differentiation of human adipose stem cells

The effects of bioactive glass S53P4 or beta-tricalcium phosphate; and bone morphogenetic proteins bone morphogenetic protein-2, bone morphogenetic protein-7, or bone morphogenetic protein-2 + 7 on osteogenic differentiation of human adipose stem cells were compared in control medium, osteogenic medium, and bone morphogenetic protein-supplemented osteogenic medium to assess suitability for bone tissue engineering. Cell amount was evaluated with qDNA measurements; osteogenic differentiation using marker gene expression, alkaline phosphate activity, and angiogenic potential was measured by vascular endothelial growth factor expression. As compared to beta-tricalcium phosphate, cell amount was significantly greater for bioactive glass in control medium after 7 days and in osteogenic medium after 14 days, and alkaline phosphate activity was always significantly greater for bioactive glass in control medium. However, alkaline phosphate activity increased for beta-tricalcium phosphate and decreased for bioactive glass granules in osteogenic medium. For both biomaterials, bone morphogenetic protein supplementation decreased cell amount and osteogenic differentiation of human adipose stem cells, and vascular endothelial growth factor expressions correlated with cell amounts. Effects of culture medium on human adipose stem cells are biomaterial dependent; bioactive glass in control medium enhanced osteogenic differentiation most effectively.

BMP2 is superior to BMP4 for promoting human muscle-derived stem cell-mediated bone regeneration in a critical-sized calvarial defect model

Muscle-derived cells have been successfully isolated using a variety of different methods and have been shown to possess multilineage differentiation capacities, including an ability to differentiate into articular cartilage and bone in vivo; however, the characterization of human muscle-derived stem cells (hMDSCs) and their bone regenerative capacities have not been fully investigated. Genetic modification of these cells may enhance their osteogenic capacity, which could potentially be applied to bone regenerative therapies. We found that hMDSCs, isolated by the preplate technique, consistently expressed the myogenic marker CD56, the pericyte/endothelial cell marker CD146, and the mesenchymal stem cell markers CD73, CD90, CD105, and CD44 but did not express the hematopoietic stem cell marker CD45, and they could undergo osteogenic, chondrogenic, adipogenic, and myogenic differentiation in vitro. In order to investigate the osteoinductive potential of hMDSCs, we constructed a retroviral vector expressing BMP4 and GFP and a lentiviral vector expressing BMP2. The BMP4-expressing hMDSCs were able to undergo osteogenic differentiation in vitro and exhibited enhanced mineralization compared to nontransduced cells; however, when transplanted into a calvarial defect, they failed to regenerate bone. Local administration of BMP4 protein and cell pretreatment with N-acetylcysteine (NAC), which improves cell survival, did not enhance the osteogenic capacity of the retro-BMP4-transduced cells. In contrast, lenti-BMP2-transduced hMDSCs not only exhibited enhanced in vitro osteogenic differentiation but also induced robust bone formation and nearly completely healed a critical-sized calvarial defect in CD-1 nude mice 6 weeks following transplantation. Herovici's staining of the regenerated bone demonstrated that the bone matrix contained a large amount of type I collagen. Our findings indicated that the hMDSCs are likely mesenchymal stem cells of muscle origin and that BMP2 is more efficient than BMP4 in promoting the bone regenerative capacity of the hMDSCs in vivo.

Formation of Engineered Bone with Adipose Stromal Cells from Buccal Fat Pad

A robust method for inducing bone formation from adipose-derived stromal cells (ADSCs) has not been established. Moreover, the efficacy of strong osteogenic inducers including BMP-2 for ADSC-mediated bone engineering remains controversial. Meanwhile, the buccal fat pad (BFP), which is found in the oral cavity as an adipose-encapsulated mass, has been shown to have potential as a new accessible source of ADSCs for oral surgeons. However, to date, there have been no reports that define the practical usefulness of ADSCs from BFP (B-ADSCs) for bone engineering. Here, we report an efficient method of generating bone from B-ADSCs using rhBMP-2. The analyses show that B-ADSCs can differentiate in vitro toward the osteoblastic lineage by the addition of rhBMP-2 to culture medium, regardless of the presence of osteoinductive reagents (OSR), as demonstrated by measurements of ALP activity, in vitro calcification, and osteogenic gene expression. Interestingly, adipogenic genes were clearly detectable only in cultures with rhBMP-2 and OSR. However, in vivo bone formation was most substantial when B-ADSCs cultured in this condition were transplanted. Thus, B-ADSCs reliably formed engineered bone when pre-treated with rhBMP-2 for inducing mature osteoblastic differentiation. This study supports the potential translation for B-ADSC use in the clinical treatment of bone defects.

Enhancement of human adipose-derived stromal cell angiogenesis through knockdown of a BMP-2 inhibitor

BACKGROUND

Previous studies have demonstrated the role of noggin, a bone morphogenetic protein-2 inhibitor, in vascular development and angiogenesis. The authors hypothesized that noggin suppression in human adipose-derived stromal cells would enhance vascular endothelial growth factor secretion and angiogenesis in vitro and in vivo to a greater extent than bone morphogenetic protein-2 alone.

METHODS

Human adipose-derived stromal cells were isolated from human lipoaspirate (n = 6) noggin was knocked down using lentiviral techniques. Knockdown was confirmed and angiogenesis was assessed by tubule formation and quantitative real-time polymerase chain reaction. Cells were seeded onto scaffolds and implanted into a 4-mm critical size calvarial defect. In vivo angiogenic signaling was assessed by immunofluorescence and immunohistochemistry.

RESULTS

Human adipose-derived stromal cells with noggin suppression secreted significantly higher amounts of angiogenic proteins, expressed higher levels of angiogenic genes, and formed more tubules in vitro. In vivo, calvarial defects seeded with noggin shRNA human adipose-derived stromal cells exhibited a significantly higher number of vessels in the defect site than controls by immunohistochemistry (p < 0.05). In addition, bone morphogenetic protein-2-releasing scaffolds significantly enhanced vascular signaling in the defect site.

CONCLUSIONS

Human adipose-derived stromal cells demonstrate significant increases in angiogenesis in vitro and in vivo with both noggin suppression and BMP-2 supplementation. By creating a cell with noggin suppressed and by using a scaffold with increased bone morphogenetic protein-2 signaling, a more angiogenic niche can be created.

Enhancing osteoconduction of PLLA-based nanocomposite scaffolds for bone regeneration using different biomimetic signals to MSCs

In bone engineering, the adhesion, proliferation and differentiation of mesenchymal stromal cells rely on signaling from chemico-physical structure of the substrate, therefore prompting the design of mimetic "extracellular matrix"-like scaffolds. In this study, three-dimensional porous poly-L-lactic acid (PLLA)-based scaffolds have been mixed with different components, including single walled carbon nanotubes (CNT), micro-hydroxyapatite particles (HA), and BMP2, and treated with plasma (PT), to obtain four different nanocomposites: PLLA + CNT, PLLA + CNTHA, PLLA + CNT + HA + BMP2 and PLLA + CNT + HA + PT. Adult bone marrow mesenchymal stromal cells (MSCs) were derived from the femur of orthopaedic patients, seeded on the scaffolds and cultured under osteogenic induction up to differentiation and mineralization. The release of specific metabolites and temporal gene expression profiles of marrow-derived osteoprogenitors were analyzed at definite time points, relevant to in vitro culture as well as in vivo differentiation. As a result, the role of the different biomimetic components added to the PLLA matrix was deciphered, with BMP2-added scaffolds showing the highest biomimetic activity on cells differentiating to mature osteoblasts. The modification of a polymeric scaffold with reinforcing components which also work as biomimetic cues for cells can effectively direct osteoprogenitor cells differentiation, so as to shorten the time required for mineralization.

Augmented healing of critical-size calvarial defects by baculovirus-engineered MSCs that persistently express growth factors

Repair of large calvarial bony defects remains clinically challenging because successful spontaneous calvarial re-ossification rarely occurs. Although bone marrow-derived mesenchymal stem cells (BMSCs) genetically engineered with baculovirus (BV) for transient expression of osteogenic/angiogenic factors hold promise for bone engineering, we hypothesized that calvarial bone healing necessitates prolonged growth factor expression. Therefore, we employed a hybrid BV vector system whereby one BV expressed FLP while the other harbored the BMP2 (or VEGF) cassette flanked by Frt sequences. Transduction of rabbit BMSCs with the FLP/Frt-based BV vector led to FLP-mediated episome formation, which not only extended the BMP2/VEGF expression beyond 28 days but augmented the BMSCs osteogenesis. After allotransplantation into rabbits, X-ray, PET/CT, μCT and histological analyses demonstrated that the sustained BMP2/VEGF expression remarkably ameliorated the angiogenesis and regeneration of critical-size (8 mm) calvarial defects, when compared with the group implanted with BMSCs transiently expressing BMP2/VEGF. The prolonged expression by BMSCs accelerated the bone remodeling and regenerated the bone through the natural intramembranous pathway, filling ≈83% of the area and ≈63% of the volume in 12 weeks. These data implicated the potential of the hybrid BV vector to engineer BMSCs for sustained BMP2/VEGF expression and the repair of critical-size calvarial defects.

Thin-layer hydroxyapatite deposition on a nanofiber surface stimulates mesenchymal stem cell proliferation and their differentiation into osteoblasts

Pulsed laser deposition was proved as a suitable method for hydroxyapatite (HA) coating of coaxial poly-ɛ-caprolactone/polyvinylalcohol (PCL/PVA) nanofibers. The fibrous morphology of PCL/PVA nanofibers was preserved, if the nanofiber scaffold was coated with thin layers of HA (200 nm and 400 nm). Increasing thickness of HA, however, resulted in a gradual loss of fibrous character. In addition, biomechanical properties were improved after HA deposition on PCL/PVA nanofibers as the value of Young's moduli of elasticity significantly increased. Clearly, thin-layer hydroxyapatite deposition on a nanofiber surface stimulated mesenchymal stem cell viability and their differentiation into osteoblasts. The optimal depth of HA was 800 nm.

Concise review: adipose-derived stromal cells for skeletal regenerative medicine

As the average age of the population grows, the incidence of osteoporosis and skeletal diseases continues to rise. Current treatment options for skeletal repair include immobilization, rigid fixation, alloplastic materials, and bone grafts, all which have significant limitations, especially in the elderly. Adipose-derived stromal cells (ASCs) represent a readily available abundant supply of mesenchymal stem cells, which demonstrate the ability to undergo osteogenesis in vitro and in vivo, making ASCs a promising source of skeletal progenitor cells. Current protocols allow for the harvest of over one million cells from only 15 ml of lipoaspirate. Despite the clinical use of ASCs to treat systemic inflammatory diseases, no large human clinical trials exist using ASCs for skeletal tissue engineering. The aim of this review is to define ASCs, to describe the isolation procedure of ASCs, to review the basic biology of their osteogenic differentiation, discuss cell types and scaffolds available for bone tissue engineering, and finally, to explore imaging of ASCs and their potential future role in human skeletal tissue engineering efforts.

Non-viral delivery of inductive and suppressive genes to adipose-derived stem cells for osteogenic differentiation

PURPOSE

To assess the effects of co-delivering osteoinductive DNA and/or small interfering RNA in directing the osteogenic differentiation of human adipose-derived stem cells (hADSCs) using a combinatorial, non-viral gene delivery approach.

METHODS

hADSCs were transfected using combinations of the following genes: BMP2, siGNAS and siNoggin using poly(β-amino esters) or lipid-like molecules. A total of 15 groups were evaluated by varying DNA doses, timing of treatment, and combinations of signals. All groups were cultured in osteogenic medium for up to 37 days, and outcomes were measured using gene expression, biochemical assays, and histology.

RESULTS

Biomaterials-mediated gene delivery led to a dose-dependent up-regulation of BMP2 and significant gene silencing of GNAS and Noggin in hADSCs. BMP2 alone slightly up-regulates osteogenic marker expression in hADSCs. In contrast, co-delivery of BMP2 and siGNAS or siNoggin significantly accelerates the hADSC differentiation towards osteogenic differentiation, with marked increase in bone marker expression and mineralization.

CONCLUSIONS

We report a combinatorial platform for identifying synergistic interactions among multiple genetic signals associated with osteogenic differentiation of hADSCs. Our results suggest that inductive or suppressive genetic switches interact in a complex manner, and highlight the promise of combinatorial approaches towards rapidly identifying optimal signals for promoting desired stem cell differentiation.