PLGA micro and nanoparticles in delivery of peptides and proteins; problems and approaches

In vivo evaluation of a Nano-enabled therapeutic vitreous substitute for the precise delivery of triamcinolone to the posterior segment of the eye

This study focused on the design of a thermoresponsive, nano-enabled vitreous substitute for the treatment of retinal diseases. Synthesis of a hydrogel composed of hyaluronic acid and a poloxamer blend was undertaken. Poly(D,L-lactide-co-glycolide) acid nanoparticles encapsulating triamcinolone acetonide (TA) were synthesised with a spherical morphology and mean diameter of ~ 153 nm. Hydrogel fabrication and nanoparticle loading within the hydrogel was confirmed via physicochemical analysis. Gelation studies indicated that hydrogels formed in nine minutes and 10 min for the unloaded and nanoparticle-loaded hydrogels, respectively. The hydrogels displayed in situ gel formation properties, and rheometric viscoelastic studies indicated the unloaded and loaded hydrogels to have modulus values similar to those of the natural vitreous at 37 °C. Administration of the hydrogels was possible via 26G needles allowing for clinical application and drug release of triamcinolone acetonide from the nanoparticle-loaded hydrogel, which provided sustained in vitro drug release over nine weeks. The hydrogels displayed minimal swelling, reaching equilibrium swelling within 12 h for the unloaded hydrogel, and eight hours for the nanoparticle-loaded hydrogel. Biodegradation in simulated vitreous humour with lysozyme showed < 20% degradation within nine weeks. Biocompatibility of both unloaded and loaded hydrogels was shown with mouse fibroblast and human retinal pigment epithelium cell lines. Lastly, a pilot in vivo study in a New Zealand White rabbit model displayed minimal toxicity with precise, localised drug release behaviour, and ocular TA levels maintained within the therapeutic window for the 28-day investigation period, which supports the potential applicability of the unloaded and nanoparticle-loaded hydrogels as vitreous substitutes that function as drug delivery systems following vitrectomy surgery.

Polydopamine-modified black phosphorus nanosheet drug delivery system for the treatment of ischemic stroke

Black phosphorus (BP), as a representative metal-free semiconductor, has been extensively explored. It has a higher drug loading capacity in comparison to conventional materials and also possesses excellent biocompatibility and biodegradability. Furthermore, BP nanosheets can enhance the permeability of the blood-brain barrier (BBB) upon near-infrared (NIR) irradiation, owing to their photothermal effect. However, the inherent instability of BP poses a significant limitation, highlighting the importance of surface modification to enhance its stability. Ischemic stroke (IS) is caused by the occlusion of blood vessels, and its treatment is challenging due to the hindrance caused by the BBB. Therefore, there is an urgent need to identify improved methods for bypassing the BBB for more efficient IS treatment. This research devised a novel drug delivery approach based on pterostilbene (Pte) supported by BP nanosheets, modified with polydopamine (PDA) to form BP-Pte@PDA. This system shows robust stability and traverses the BBB using effective photothermal mechanisms. This enables the release of Pte upon pH and NIR stimuli, offering potential therapeutic advantages for treating IS. In a middle cerebral artery occlusion mouse model, the BP-Pte@PDA delivery system significantly reduced infarct size, and brain water content, improved neurological deficits, reduced the TLR4 inflammatory factor expression, and inhibited cell apoptosis. In summary, the drug delivery system fabricated in this study thus demonstrated good stability, therapeutic efficacy, and biocompatibility, rendering it suitable for clinical application.

Microfluidic-assisted preparation of PLGA nanoparticles loaded with insulin: a comparison with double emulsion solvent evaporation method

Poly lactic-co-glycolic acid (PLGA) is an ideal polymer for the delivery of small and macromolecule drugs. Conventional preparation methods of PLGA nanoparticles (NPs) result in poor control over NPs properties. In this research, a microfluidic mixer was designed to produce insulin-loaded PLGA NPs with tuned properties. Importantly; aggregation of the NPs through the mixer was diminished due to the coaxial mixing of the precursors. The micromixer allowed for the production of NPs with small size and narrow size distribution compared to the double emulsion solvent evaporation (DESE) method. Furthermore, encapsulation efficiency and loading capacity indicated a significant increase in optimized NPs produced through the microfluidic method in comparison to DESE method. NPs prepared by the microfluidic method were able to achieve a more reduction of trans-epithelial electrical resistance values in the Caco-2 cells compared to those developed by the DESE technique that leads to greater paracellular permeation. Compatibility and interaction between components were evaluated by differential scanning calorimetry and fourier transform infrared analysis. Also, the effect of NPs on cell toxicity was investigated using MTT test. Numerical simulations were conducted to analyze the effect of mixing patterns on the properties of the NPs. It was revealed that by decreasing flow rate ratio, i.e. flow rate of the organic phase to the flow rate of the aqueous phase, mixing of the two streams increases. As an alternative to the DESE method, high flexibility in modulating hydrodynamic conditions of the microfluidic mixer allowed for nanoassembly of NPs with superior insulin encapsulation at smaller particle sizes.

Cell and biomaterial delivery strategies to induce immune tolerance

The prevalence of immune-mediated disorders, including autoimmune conditions and allergies, is steadily increasing. However, current therapeutic approaches are often non-specific and do not address the underlying pathogenic condition, often resulting in impaired immunity and a state of generalized immunosuppression. The emergence of technologies capable of selectively inhibiting aberrant immune activation in a targeted, antigen (Ag)-specific manner by exploiting the body's intrinsic tolerance pathways, all without inducing adverse side effects, holds significant promise to enhance patient outcomes. In this review, we will describe the body's natural mechanisms of central and peripheral tolerance as well as innovative delivery strategies using cells and biomaterials targeting innate and adaptive immune cells to promote Ag-specific immune tolerance. Additionally, we will discuss the challenges and future opportunities that warrant consideration as we navigate the path toward clinical implementation of tolerogenic strategies to treat immune-mediated diseases.

Nano-immunomodulators: prospective applications to combat drug resistant bacterial infections and related complications

Antimicrobial resistance (AMR) is a growing problem in our healthcare sector, it can make infections more difficult and expensive to treat and lead to treatment failure and increased risk of death. Currently, at least 700,000 people worldwide die each year from AMR. Alternative methods for mitigating drug-resistant bacterial infections are desperately needed because of the unacceptably low rate of conventional antibiotic discovery. Therefore, the implementation of various therapeutic strategies is necessary to deal with drug-resistant bacteria and immunomodulation is one of them which is highly encouraged through various studies. Immunomodulators are different biological or synthetic substances that possess the capability of inducing, suppressing, or overall modulating the innate and adaptive immune system. Some phytochemicals, including flavonoids, glycosides, polysaccharides, terpenoids, essential oils, peptides, synthetic molecules, and synthetic biomaterials, can play a crucial role in the fight against bacterial infections directly or indirectly by enhancing the activity of existing antibiotics or by boosting immunity. Nanotechnology can be used to modulate immune responses through various fabrication methods and strategies of design and for drug formulation by encapsulating potential compounds/molecules in the form of nanoparticles and by surface modification or capping of nanomaterials. This approach can improve drug solubility, stability, and bioavailability, reduce toxicity, and help to increase the effectiveness of drugs against resistant microorganisms. This review aims to provide current developments in the field of immunomodulators of different origins that can be combined with nanotechnology and exploited as potential future drugs or adjuvants to fight drug-resistant bacterial pathogens.

Hydrogels: An overview of its classifications, properties, and applications

The review paper starts with the introduction to hydrogels along with broad literature survey covering different modes of synthesis including high energy radiation methods. After that, paper covered broad classification of the hydrogels depending upon the basis of their source of origin, method of synthesis, type of cross-linking present and ionic charges on bound groups. Another advanced category response triggered hydrogels, which includes pH, temperature, electro, and light and substrate responsive hydrogels was also studied. Presented paper summarises chemical structure, properties, and synthesis of different kinds of hydrogels. Main focus was given to the preparation super absorbents such as: Semi-interpenetrating networks (semi-IPNs), Interpenetrating networks (IPNs) and cross-linked binary graft copolymers (BGCPs). The weak mechanical properties and easy degradation limit the uses of bio-based -hydrogels in biomedical field. Their properties can be improved through different chemical and physical methods. These methods were also discussed in the current research paper. Also, it includes development of hydrogels as controlled drug delivery devices, as implants and biomaterials to replace malfunctioned body parts along with their use in several other applications listed in the literature. Literature survey on the application of hydrogels in different fields like biomedical, nano-biotechnology, tissue engineering, drug delivery and agriculture was also carried out.

Degradable Hydrogel for Sustained Localized Delivery of Anti-Tumor Drugs

Disadvantages of systemically administered immunomodulatory anti-tumor therapies include poor efficacy and high toxicity. Direct intratumoral injection of a drug is often associated with rapid efflux from the site of administration, thus reducing local exposure and therapeutic efficacy, while potentially increasing systemic adverse events. To address this, a sustained release prodrug technology was developed using a transient conjugation (TransConTM) technology to provide long-term high local drug exposure after injection in the tumor while minimizing systemic exposure. TransCon technology for systemic delivery is clinically validated, with multiple compounds in late-stage clinical development and approval of a once-weekly growth hormone for pediatric growth hormone deficiency. As a further application of this technology, this report describes the design, preparation, and functional characterization of hydrogel microspheres as insoluble, yet degradable carrier system. Microspheres were obtained after reaction of PEG-based polyamine dendrimers and bifunctional crosslinkers. Resiquimod, a TLR7/8 agonist, and axitinib, a vascular endothelial growth factor tyrosine kinase inhibitor, were chosen as anti-cancer drugs. The drugs were covalently attached to the carrier by linkers, which released the drugs under physiological conditions. Essentially all resiquimod or axitinib was released over weeks before physical degradation of the hydrogel microsphere was observed. In summary, TransCon Hydrogel technology allows localized sustained-release drug delivery for cancer therapy enabling high local drug concentrations while at the same time ensuring low systemic drug exposure over weeks with a single injection, which may improve the therapeutic index and improve efficacy, while minimizing systemic adverse events. A hydrogel prodrug of resiquimod, TransCon TLR7/8 agonist, is currently being investigated in clinical trials of patients with solid tumors (NCT04799054).

Targeted therapy of breast tumor by PLGA-based nanostructures: The versatile function in doxorubicin delivery

Breast carcinoma is a molecularly diverse illness, and it is among the most prominent and often reported malignancies in female across the globe. Surgical intervention, chemotherapy, immunotherapy, gene therapy, and endocrine treatment are among the currently viable treatment options for the carcinoma of breast. Chemotherapy is among the most prevalent cancer management strategy. Doxorubicin (DOX) widely employed as a cytostatic medication for the treatment of a variety of malignancies. Despite its widespread acceptance and excellent efficacy against an extensive line up of neoplasia, it has a variety of shortcomings that limit its therapeutic potential in the previously mentioned indications. Employment of nanoparticulate systems has come up as a unique chemo medication delivery strategy and are being considerably explored for the amelioration of breast carcinoma. Polylactic-co-glycolic acid (PLGA)-based nano systems are being utilized in a number of areas within the medical research and medication delivery constitutes one of the primary functions for PLGA given their inherent physiochemical attributes, including their aqueous solubility, biocompatibility, biodegradability, versatility in formulation, and limited toxicity. Herein along with the different application of PLGA-based nano formulations in cancer therapy, the present review intends to describe the various research investigations that have been conducted to enumerate the effectiveness of DOX-encapsulated PLGA nanoparticles (DOX-PLGA NPs) as a feasible treatment option for breast cancer.

Biofunctionalization of 3D printed collagen with bevacizumab-loaded microparticles targeting pathological angiogenesis

Pathological angiogenesis is a crucial attribute of several chronic diseases such as cancer, age-related macular degeneration, and osteoarthritis (OA). In the case of OA, pathological angiogenesis mediated by the vascular endothelial growth factor (VEGF), among other factors, contributes to cartilage degeneration and to implants rejection. In line with this, the use of the anti-VEGF bevacizumab (BVZ) has been shown to prevent OA progression and support cartilage regeneration. The aim of this work was to functionalize a medical grade collagen with poly (lactic-co-glycolic acid) (PLGA) microparticles containing BVZ via three-dimensional (3D) printing to target pathological angiogenesis. First, the effect of several formulation parameters on the encapsulation and release of BVZ from PLGA microparticles was studied. Then, the anti-angiogenic activity of released BVZ was tested in a 3D cell model. The 3D printability of the microparticle-loaded collagen ink was tested by evaluating the shape fidelity of 3D printed structures. Results showed that the release and the encapsulation efficiency of BVZ could be tuned as a function of several formulation parameters. In addition, the released BVZ was observed to reduce vascularization by human umbilical vein endothelial cells. Finally, the collagen ink with embedded BVZ microparticles was successfully printed, leading to shape-stable meniscus-, nose- and auricle-like structures. Taken altogether, we defined the conditions for the successful combination of BVZ-loaded microparticles with the 3D printing of a medical grade collagen to target pathological angiogenesis.

Next-Generation Hydrogels as Biomaterials for Biomedical Applications: Exploring the Role of Curcumin

Since the first report on the pharmacological activity of curcumin in 1949, enormous amounts of research have reported diverse activities for this natural polyphenol found in the dietary spice turmeric. However, curcumin has not yet been used for human application as an approved drug. The clinical translation of curcumin has been hampered due to its low solubility and bioavailability. The improvement in bioavailability and solubility of curcumin can be achieved by its formulation using drug delivery systems. Hydrogels with their biocompatibility and low toxicity effects have shown a substantial impact on the successful formulation of hydrophobic drugs for human clinical trials. This review focuses on hydrogel-based delivery systems for curcumin and describes its applications as anti-cancer as well as wound healing agents.

Model-based Optimization of Drug Release Rate from a Size Distributed Population of Biodegradable Polymer Carriers

In the present study, a comprehensive polymer degradation-drug diffusion model is developed to describe the polymer degradation kinetics and quantify the release rate of an active pharmaceutical ingredient (API) from a size-distributed population of drug-loaded poly(lactic-co-glycolic) acid (PLGA) carriers in terms of material and morphological properties of the drug carriers. To take into account the spatial-temporal variation of the drug and water diffusion coefficients, three new correlations are developed in terms of spatial-temporal variation of the molecular weight of the degrading polymer chains. The first one relates the diffusion coefficients with the time-spatial variation of the molecular weight of PLGA and initial drug loading and, the second one with the initial particle size, and the third one with evolution of the particle porosity due to polymer degradation. The derived model, comprising a system of partial differential and algebraic equations, is numerically solved using the method of lines and validated against published experimental data on the drug release rate from a size distributed population of piroxicam-PLGA microspheres. Finally, a multi-parametric optimization problem is formulated to calculate the optimal particle size and drug loading distributions of drug-loaded PLGA carriers to realize a desired zero-order drug release rate of a therapeutic drug over a specified administration period of several weeks. It is envisaged that the proposed model-based optimization approach will aid the optimal design of new controlled drug delivery systems and, consequently, the therapeutic outcome of an administered drug.

Particle-Based therapies for antigen specific treatment of type 1 diabetes

Type 1 diabetes mellitus (T1D) is the leading metabolic disorder in children worldwide. Over time, incidence rates have continued to rise with 20 million individuals affected globally by the autoimmune disease. The current standard of care is costly and time-consuming requiring daily injections of exogenous insulin. T1D is mediated by autoimmune effector responses targeting autoantigens expressed on pancreatic islet β-cells. One approach to treat T1D is to skew the immune system away from an effector response by taking an antigen-specific approach to heighten a regulatory response through a therapeutic vaccine. An antigen-specific approach has been shown with soluble agents, but the effects have been limited. Micro or nanoparticles have been used to deliver a variety of therapeutic agents including peptides and immunomodulatory therapies to immune cells. Particle-based systems can be used to deliver cargo into the cell and microparticles can passively target phagocytic cells. Further, surface modification and controlled release of encapsulated cargo can enhance delivery over soluble agents. The induction of antigen-specific immune tolerance is imperative for the treatment of autoimmune diseases such as T1D. This review highlights studies that utilize particle-based platforms for the treatment of T1D.

Non-canonical inflammasome activation mediates the adjuvanticity of nanoparticles

The non-canonical inflammasome sensor caspase-11 and gasdermin D (GSDMD) drive inflammation and pyroptosis, a type of immunogenic cell death that favors cell-mediated immunity (CMI) in cancer, infection, and autoimmunity. Here we show that caspase-11 and GSDMD are required for CD8⁺ and Th1 responses induced by nanoparticulate vaccine adjuvants. We demonstrate that nanoparticle-induced reactive oxygen species (ROS) are size dependent and essential for CMI, and we identify 50- to 60-nm nanoparticles as optimal inducers of ROS, GSDMD activation, and Th1 and CD8⁺ responses. We reveal a division of labor for IL-1 and IL-18, where IL-1 supports Th1 and IL-18 promotes CD8⁺ responses. Exploiting size as a key attribute, we demonstrate that biodegradable poly-lactic co-glycolic acid nanoparticles are potent CMI-inducing adjuvants. Our work implicates ROS and the non-canonical inflammasome in the mode of action of polymeric nanoparticulate adjuvants and establishes adjuvant size as a key design principle for vaccines against cancer and intracellular pathogens.

Hypoxia-Activated PEGylated Paclitaxel Prodrug Nanoparticles for Potentiated Chemotherapy

Developing controlled drug-release systems is imperative and valuable for increasing the therapeutic index. Herein, we synthesized hypoxia-responsive PEGylated (PEG = poly(ethylene glycol)) paclitaxel prodrugs by utilizing azobenzene (Azo) as a cleavable linker. The as-fabricated prodrugs could self-assemble into stable nanoparticles (PAP NPs) with high drug content ranging from 26 to 44 wt %. The Azo group in PAP NPs could be cleaved at the tumorous hypoxia microenvironment and promoted the release of paclitaxel for exerting cytotoxicity toward cancer cells. In addition, comparative researches revealed that the PAP NPs with the shorter methoxy-PEG chain (molecular weight = 750) possessed enhanced tumor suppression efficacy and alleviated off-target toxicity. Our work demonstrates a promising tactic to develop smart and simple nanomaterials for disease treatment.

Peptide loaded polymeric nanoparticles by non-aqueous nanoprecipitation

It is always a challenge to encapsulate water-soluble peptides in polymer nanoparticle (NP) systems. We establish and validate our newly developed non-aqueous nanoprecipitation method to encapsulate neuro-peptides drugs such as oxytocin and Luteinizing hormone-releasing hormone (LHRH) in poly(sebacic anhydride) (PSA) NPs. NPs were prepared by a solvent-antisolvent process under a strict anhydrous environment to obtain high drug loading and to avoid premature PSA degradation and drug release. Dynamic light scattering (DLS) and Scanning Electron Microscopy (SEM) reveal the size for both drug loaded PSA NPs to ∼ 300 nm. The drug loaded NPs were dispersible and spherical in shape with uniform morphology. The in vitro release profile of oxytocin from PSA NPs occurs with the burst release of ∼ 50% within the first hour in the aqueous release medium, whereas LHRH release is comparatively slow. Thus, looking into the fast degrading properties of PSA and drug release behavior, the developed NPs can be used for direct delivery of the neuropeptides to the olfactory epithelium using a refillable nasal atomizer that deposits mist onto the olfactory neuro-epithelium. We also applied our developed method to prepare NPs of poly(lactic-co-glycolic acid) (PLGA), polylactic acid (PLA), and poly(ε-caprolactone) (PCL). A Thyrotropin releasing hormone (TRH) was used as the sample neuropeptide drug to validate our non-aqueous method. The results reveal the formation of TRH loaded PLGA, PLA and PCL NPs with 100% drug loading. TEM analysis shows the formation of spherical NPs, having similar release properties as those of PSA NPs. Overall, we report that our developed method is suitable for co-encapsulating hydrophilic drugs in polymer NPs with high drug loading and release properties.

Preparation, Characterization, and Biological Evaluation of a Hydrophilic Peptide Loaded on PEG-PLGA Nanoparticles

The encapsulation of peptides and proteins in nanosystems has been extensively investigated for masking unfavorable biopharmaceutical properties, including short half-life and poor permeation through biological membranes. Therefore, the aim of this work was to encapsulate a small antimicrobial hydrophilic peptide (H-Ser-Pro-Trp-Thr-NH2, FS10) in PEG-PLGA (polyethylene glycol-poly lactic acid-co-glycolic acid) nanoparticles (Nps) and thereby overcome the common limitations of hydrophilic drugs, which because they facilitate water absorption suffer from rapid degradation. FS10 is structurally related to the well-known RNAIII inhibiting peptide (RIP) and inhibits S. aureus biofilm formation. Various parameters, including different method (double emulsion and nanoprecipitation), pH of the aqueous phase and polymeric composition, were investigated to load FS10 into PEG-PLGA nanoparticles. The combination of different strategies resulted in an encapsulation efficiency of around 25% for both the double emulsion and the nanoprecipitation method. It was found that the most influential parameters were the pH—which tailors the peptides charge—and the polymeric composition. FS10-PEG-PLGA nanoparticles, obtained under optimized parameters, showed size lower than 180 nm with zeta potential values ranging from −11 to −21 mV. In vitro release studies showed that the Nps had an initial burst release of 48−63%, followed by a continuous drug release up to 21 h, probably caused by the porous character of the Nps. Furthermore, transmission electron microscopy (TEM) analysis revealed particles with a spherical morphology and size of around 100 nm. Antimicrobial assay showed that the minimum inhibitory concentration (MIC) of the FS10-loaded Nps, against S. aureus strains, was lower (>128 µg/mL) than that of the free FS10 (>256 µg/mL). The main goal of this work was to develop polymeric drug delivery systems aiming at protecting the peptide from a fast degradation, thus improving its accumulation in the target site and increasing the drug-bacterial membrane interactions.

Native PLGA nanoparticles regulate APP metabolism and protect neurons against β-amyloid toxicity: Potential significance in Alzheimer's disease pathology

Biodegradable poly(lactic-co-glycolic acid)(PLGA) nanoparticles have been used extensively in delivering drugs to target tissues due to their excellent biocompatibility. Evidence suggests that PLGA-conjugated drugs/agents can attenuate pathology in cellular/animal models of Alzheimer's disease (AD), which is initiated by increased level/aggregation of amyloid β (Aβ) peptide generated from amyloid precursor protein (APP). The beneficial effects were attributed to conjugated-drugs rather than to PLGA nanoparticles. Interestingly, we recently reported that PLGA without any drug/agent (native PLGA) can suppress Aβ aggregation/toxicity. However, very little is known about the internalization, subcellular localization or effects of PLGA in neurons. In this study, using primary mouse cortical neurons, we first showed that native PLGA is internalized by an energy-mediated clathrin-dependent/-independent pathway and is localized in endosomal-lysosomal-autophagic vesicles. By attenuating internalization, PLGA can protect neurons against Aβ-mediated toxicity. Additionally, PLGA treatment altered expression profiles of certain AD-associated genes and decreased the levels of APP, its cleaved products α-/β-CTFs and Aβ peptides in mouse as well as iPSC-derived neurons from control and AD patients. Collectively, these results suggest that native PLGA not only protects neurons against Aβ-induced toxicity but also influences the expression of AD-related genes/proteins - highlighting PLGA's implication in normal and AD-related pathology.

From residue to resource: new insights into the synthesis of functionalized lignin micro/nanospheres by self-assembly technology for waste resource utilization

Among the most abundant biopolymers in the biosphere, lignin is a renewable aromatic compound that represents an untapped opportunity to create new biological products. However, the complex interlacing structures of cellulose, hemicellulose and lignin, as well as the unique properties of lignin, limit the utilization of value-added lignin. Lignin-based nanomaterials open the door for lignin applications in environmental pollutant remediation, biofuel production, biomedicine, and other fields. Herein, we present various factors influencing the formation of micro-nanospheres by self-assembly techniques through a review of previous literature, and emphasize the simple and green synthesis of lignin micro/nanospheres (LMNPs) under non-modified conditions. More importantly, we discuss the mechanism of the formation of nanospheres. Considering the heterogeneity of lignin and the polarity of different solvents, we propose that self-assembly techniques should focus more on the influence brought by lignin itself or the solvent, so that the external conditions can be controlled to prepare LMNPs, which can be used in specific fields. A brief overview of the contribution of lignin-based nanomaterials in various fields is also presented. This review could provide insight for the development of lignin-based nanomaterials.

Long-acting injectable formulation technologies: Challenges and opportunities for the delivery of fragile molecules

INTRODUCTION

The development of long acting injectables (LAIs) for protein and peptide therapeutics has been a key challenge over the last 20 years. If these molecules offer advantages due to their high specificity and selectivity, their controlled release may confer several additional benefits in terms of extended half-life, local delivery, and patient compliance.

AREA COVERED

This manuscript aims to give an overview of peptide and protein based LAIs from an industrial perspective, describing both approved and promising technologies (with exceptions of protein engineering strategies and devices), their advantages and potential improvements to aid their access to the market.

EXPERT OPINION

Many LAIs have been developed for peptides, with formulations on the market for several decades. On the contrary, LAIs for proteins are still far from the market and issues related to manufacturing and sterilization of these products still need to be overcome. In situ forming depots (ISFDs), whose simple manufacturing conditions and easy administration procedures (without reconstitution) are strong advantages, appear as one of the most promising technologies for the delivery of these molecules. In this regard, the approval of ELIGARD® in the early 2000's (which still requires a complex reconstitution process), paved the way for the development of second-generation, ready-to-use ISFD technologies like BEPO® and FluidCrystal®.

Nanomaterial-Based Drug Delivery System Targeting Lymph Nodes

The lymphatic system plays an indispensable role in humoral balance, lipid metabolism, and immune regulation. The lymph nodes (LNs) are known as the primary sites of tumor metastasis and the metastatic LNs largely affected the prognosis of the patiens. A well-designed lymphatic-targeted system favors disease treatment as well as vaccination efficacy. In recent years, development of nanotechnologies and emerging biomaterials have gained increasing attention in developing lymph-node-targeted drug-delivery systems. By mimicking the endogenous macromolecules or lipid conjugates, lymph-node-targeted nanocarries hold potential for disease diagnosis and tumor therapy. This review gives an introduction to the physiological functions of LNs and the roles of LNs in diseases, followed by a review of typical lymph-node-targeted nanomaterial-based drug-delivery systems (e.g., liposomes, micelles, inorganic nanomaterials, hydrogel, and nanocapsules). Future perspectives and conclusions concerned with lymph-node-targeted drug-delivery systems are also provided.

The dual interaction of antimicrobial peptides on bacteria and cancer cells; mechanism of action and therapeutic strategies of nanostructures

Microbial infection and cancer are two leading causes of global mortality. Discovering and developing new therapeutics with better specificity having minimal side-effects and no drug resistance are of an immense need. In this regard, cationic antimicrobial peptides (AMP) with dual antimicrobial and anticancer activities are the ultimate choice. For better efficacy and improved stability, the AMPs available for treatment still required to be modified. There are several strategies in which AMPs can be enhanced through, for instance, nano-carrier application with high selectivity and specificity enables researchers to estimate the rate of drug delivery to a particular tissue. In this review we present the biology and modes of action of AMPs for both anticancer and antimicrobial activities as well as some modification strategies to improve the efficacy and selectivity of these AMPs.

Advances of nano drug delivery system for the theranostics of ischemic stroke

From the global perspective, stroke refers to a highly common cause of disability and death. Ischemic stroke (IS), attributed to blood vessel blockage, preventing the flow of blood to brain, acts as the most common form of stroke. Thus far, thrombolytic therapy is the only clinical treatment for IS with the approval from the FDA. Moreover, the physiology barrier complicates therapeutically and diagnostically related intervention development of IS. Accordingly, developing efficient and powerful curative approaches for IS diagnosis and treatment is urgently required. The advent of nanotechnology has brought dawn and hope to better curative and imaging forms for the management of IS. This work reviews the recent advances and challenges correlated with the nano drug delivery system for IS therapy and diagnosis. The overview of the current knowledge of the important molecular pathological mechanisms in cerebral ischemia and how the drugs cross the blood brain barrier will also be briefly summarized.

Melittin from Bee Venom Encapsulating Electrospun Fibers as a Potential Antimicrobial Wound Dressing Patches for Skin Infections

Skin infection compromises the body’s natural defenses. Several antibiotics are no longer effective owing to the evolution of antimicrobial-resistant (AMR) bacteria, hence, the constant development of novel antibacterial agents. Naturally occurring antibacterial agents may be potential candidates for AMR bacterial infection treatments; however, caution should be taken when administering such agents due to the high incidence of toxicity. A fibrous material system from a biocompatible polymer that could be used as a skin patch for skin infections treatment caused by AMR bacteria is proposed in this study. Bee venom’s active ingredient, melittin, was fabricated using electrospinning technology. Scanning electron microscopy showed that melittin-loaded fibers had smooth surfaces with no signs of beads or pores. The average diameter of this fibrous system was measured to be 1030 ± 160 nm, indicating its successful preparation. The melittin fibers’ drug loading and entrapment efficiency (EE%) were 49 ± 3 µg/mg and 84 ± 5%, respectively. This high EE% can be another successful preparatory criterion. An in vitro release study demonstrated that 40% of melittin was released after 5 min and achieved complete release after 120 min owing to the hydrophilic nature of the PVP polymer. A concentration of ≤10 µg/mL was shown to be safe for use on human dermal fibroblasts HFF-1 after 24-h exposure, while an antibacterial MIC study found that 5 μg/mL was the effective antimicrobial concentration for S. aureus, A. baumannii, E. coli and Candida albicans yeast. A melittin-loaded fibrous system demonstrated an antibacterial zone of inhibition equivalent to the control (melittin discs), suggesting its potential use as a wound dressing patch for skin infections.

Glycosylated Ang-(1-7) MasR Agonist Peptide Poly Lactic-co-Glycolic Acid (PLGA) Nanoparticles and Microparticles in Cognitive Impairment: Design, Particle Preparation, Physicochemical Characterization, and In Vitro Release

Heart failure (HF) causes decreased brain perfusion in older adults, and increased brain and systemic inflammation increases the risk of cognitive impairment and Alzheimer’s disease (AD). Glycosylated Ang-(1-7) MasR agonists (PNA5) has shown improved bioavailability, stability, and brain penetration compared to Ang-(1-7) native peptide. Despite promising results and numerous potential applications, clinical applications of PNA5 glycopeptide are limited by its short half-life, and frequent injections are required to ensure adequate treatment for cognitive impairment. Therefore, sustained-release injectable formulations of PNA5 glycopeptide are needed to improve its bioavailability, protect the peptide from degradation, and provide sustained drug release over a prolonged time to reduce injection administration frequency. Two types of poly(D,L-lactic-co-glycolic acid) (PLGA) were used in the synthesis to produce nanoparticles (≈0.769−0.35 µm) and microparticles (≈3.7−2.4 µm) loaded with PNA5 (ester and acid-end capped). Comprehensive physicochemical characterization including scanning electron microscopy, thermal analysis, molecular fingerprinting spectroscopy, particle sizing, drug loading, encapsulation efficiency, and in vitro drug release were conducted. The data shows that despite the differences in the size of the particles, sustained release of PNA5 was successfully achieved using PLGA R503H polymer with high drug loading (% DL) and high encapsulation efficiency (% EE) of >8% and >40%, respectively. While using the ester-end PLGA, NPs showed poor sustained release as after 72 h, nearly 100% of the peptide was released. Also, lower % EE and % DL values were observed (10.8 and 3.4, respectively). This is the first systematic and comprehensive study to report on the successful design, particle synthesis, physicochemical characterization, and in vitro glycopeptide drug release of PNA5 in PLGA nanoparticles and microparticles.

Anti-inflammatory and Antioxidant Properties of PLGA Nanoparticles Produced From Kombucha Extract on A2780 Human Ovarian Cancer Cell Line

Background: Anti-cancer agents encapsulated in nanoparticles (NPs) can result in higher efficiency. Kombucha is a fermented tea beverage, and previous reports support its anti-cancer properties. Objectives: The present study aimed to evaluate the anti-cancer and anti-inflammatory properties of poly (lactic-co-glycolic acid) loaded Kombucha NPs (PLGA-K-NPs) against the A2780 human ovarian cancer cell line. Methods: The antioxidant activity was analyzed using ferric reducing ability of plasma and 2,2’-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) assays, along with the measurement of catalase (CAT) gene expression. The gene expression of three interleukins (IL-1β, IL-6, and IL-10) was also determined to demonstrate the anti-inflammatory properties of NPs. Results: The results revealed the antioxidant effects of PLGA-K-NPs on the studied cell lines by increasing Fe3+ reduction, inhibiting the free radical formation (P<0.001), and increasing the expression of the CAT gene (P<0.001). In addition, NPs could significantly elevate the gene expression of IL-10 (P<0.01) as an anti-inflammatory cytokine at a 40 µg/mL concentration, while reducing the expression of IL-1β and IL-6, and inflammatory cytokines at all tested concentrations (P<0.01). Conclusion: According to the obtained results, PLGA-K-NPs have anti-inflammatory and anti-oxidant properties, therefore, they can be considered as a compound in the treatment of ovarian cancer. However, it needs to be further investigated in animal studies to clarify more details.

Optimization of Hemoglobin Encapsulation within PLGA Nanoparticles and Their Investigation as Potential Oxygen Carriers

Hemoglobin (Hb)-based oxygen carriers (HBOCs) display the excellent oxygen-carrying properties of red blood cells, while overcoming some of the limitations of donor blood. Various encapsulation platforms have been explored to prepare HBOCs which aim to avoid or minimize the adverse effects caused by the administration of free Hb. Herein, we entrapped Hb within a poly(lactide-co-glycolide) (PLGA) core, prepared by the double emulsion solvent evaporation method. We study the effect of the concentrations of Hb, PLGA, and emulsifier on the size, polydispersity (PDI), loading capacity (LC), and entrapment efficiency (EE) of the resulting Hb-loaded PLGA nanoparticles (HbNPs). Next, the ability of the HbNPs to reversibly bind and release oxygen was thoroughly evaluated. When needed, trehalose, a well-known protein stabilizer that has never been explored for the fabrication of HBOCs, was incorporated to preserve Hb's functionality. The optimized formulation had a size of 344 nm, a PDI of 0.172, a LC of 26.9%, and an EE of 40.7%. The HbNPs were imaged by microscopy and were further characterized by FTIR and CD spectroscopy to assess their chemical composition and structure. Finally, the ability of the encapsulated Hb to bind and release oxygen over several rounds was demonstrated, showing the preservation of its functionality.

Herbal Nanoformulations for Asthma Treatment

BACKGROUND

In recent decades, the prevalence of asthma has substantially increased worldwide. Advances in phytochemistry and phytopharmacology have clarified the active ingredients and biological activities of medicinal plant products for treating asthma, and the role of herbal therapies in asthma treatment has become increasingly evident. However, most plant extracts have low solubility and poor stability of bioactive components, resulting in low bioavailability and loss of efficacy. Owing to these shortcomings, the clinical use of many herbal extracts is limited.

OBJECTIVE

To summarise and analyse the characteristics of herbal nanoformulations and their application in asthma treatment. The objective of this review article is to address the emerging trends of herbal nanoformulations for an effective treatment for asthma.

METHODS

Various research and review articles from reputed international journals were referred and compiled.

RESULTS

The nano-sized herbal formulations improve the solubility and bioavailability of herbal medicines and contribute to the sustained release of drugs, thus, increasing the therapeutic applications of herbal extracts. The review present different types of herbal nanoformulations, including micelles, nanoparticles, solid lipid nanoparticles, lipid-based liquid crystalline nanoparticles and nanoemulsions, which are potential nanodrugs for asthma treatment.

CONCLUSIONS

Herbal nanoformulations have shown great prospects for treatment of asthma in recent years. More safety and toxicity data are still needed to promote their development and application.

Pathways for Oral and Rectal Delivery of Gold Nanoparticles (1.7 nm) and Gold Nanoclusters into the Colon: Enteric-Coated Capsules and Suppositories

Two ways to deliver ultrasmall gold nanoparticles and gold-bovine serum albumin (BSA) nanoclusters to the colon were developed. First, oral administration is possible by incorporation into gelatin capsules that were coated with an enteric polymer. These permit the transfer across the stomach whose acidic environment damages many drugs. The enteric coating dissolves due to the neutral pH of the colon and releases the capsule's cargo. Second, rectal administration is possible by incorporation into hard-fat suppositories that melt in the colon and then release the nanocarriers. The feasibility of the two concepts was demonstrated by in-vitro release studies and cell culture studies that showed the easy redispersibility after dissolution of the respective transport system. This clears a pathway for therapeutic applications of drug-loaded nanoparticles to address colon diseases, such as chronic inflammation and cancer.

Recent Advances and Challenges in Nanodelivery Systems for Antimicrobial Peptides (AMPs)

Antimicrobial peptides (AMPs) can be used as alternative therapeutic agents to traditional antibiotics. These peptides have abundant natural template sources and can be isolated from animals, plants, and microorganisms. They are amphiphilic and mostly net positively charged, and they have a broad-spectrum inhibitory effect on bacteria, fungi, and viruses. AMPs possess significant rapid killing effects and do not interact with specific receptors on bacterial surfaces. As a result, drug resistance is rarely observed with treatments. AMPs, however, have some operational problems, such as a susceptibility to enzymatic (protease) degradation, toxicity in vivo, and unclear pharmacokinetics. However, nanodelivery systems loaded with AMPs provide a safe mechanism of packaging such peptides before they exert their antimicrobial actions, facilitate targeted delivery to the sites of infection, and control the release rate of peptides and reduce their toxic side effects. However, nanodelivery systems using AMPs are at an early stage of development and are still in the laboratory phase of development. There are also some challenges in incorporating AMPs into nanodelivery systems. Herein, an insight into the nanotechnology challenges in delivering AMPs, current advances, and remaining technological challenges are discussed in depth.

PU.1 Mimic Synthetic Peptides Selectively Bind with GATA-1 and Allow c-Jun PU.1 Binding to Enhance Myelopoiesis

BACKGROUND

Hematopoietic stem cells' commitment to myelopoiesis builds immunity to prevent infection. This process is controlled through transcription factor, especially Purine rich box 1 (PU.1) protein, which plays a central role in regulating myelopoiesis. The β3/β4 region of PU.1 accommodates a coactivator transcription factor, c-Jun, to activate myelopoiesis. However, an erythroid transcription factor, GATA-1, competes with c-Jun for the β3/β4 region, abolishing myelopoiesis and promoting erythropoiesis. This competitive regulation decides the hematopoietic stem cells' commitment towards either erythroid or myeloid lineage.

METHODS

Therefore, this study investigated the in vitro and in vivo effect of novel synthetic PU.1 β3/β4 mimic peptide analogs and peptide-loaded hydrophilic poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles.

RESULTS

The designed peptides significantly increase the expression of corresponding myeloid markers, specifically CD33 in vitro. However, the in vivo delivery of peptide-loaded PLGA nanoparticles, which have sustained release effect of peptides, increases 10.8% of granulocytes as compared to control.

CONCLUSION

The observations showed that the fabricated nanoparticles protected the loaded peptides from the harsh intracellular environment for a longer duration without causing any toxicity. These findings highlight the possibility to use these peptides and peptide-loaded nanoparticles to increase hematopoietic stem cell commitment to myeloid cells in case of opportunistic infection.

Long-acting nanoparticle-loaded bilayer microneedles for protein delivery to the posterior segment of the eye

Treatment of neovascular ocular diseases involves intravitreal injections of therapeutic proteins using conventional hypodermic needles every 4-6 weeks. Due to the chronic nature of these diseases, these injections will be administrated to patients for the rest of their lives and their frequent nature can potentially pose a risk of sight-threatening complications and poor patient compliance. Therefore, we propose to develop nanoparticle (NP)-loaded bilayer dissolving microneedle (MN) arrays, to sustain delivery of protein drugs in a minimally invasive manner. In this research, a model protein, ovalbumin (OVA)-encapsulated PLGA NPs were prepared and optimised using a water-in-oil-in-water (W/O/W) double emulsion method. The impact of stabilisers and primary sonication time on the stability of encapsulated OVA was evaluated using an enzyme-linked immunosorbent assay (ELISA). Results showed that the lower primary sonication time was capable of sustaining release (77 days at 28.5% OVA loading) and improving the OVA bioactivity. The optimised NPs were then incorporated into a polymeric matrix to fabricate bilayer MNs and specifically concentrated into MN tips by high-speed centrifugation. Optimised bilayer MNs exhibited good mechanical and insertion properties and rapid dissolution kinetics (less than 3 min) in excised porcine sclera. Importantly, ex vivo transscleral distribution studies conducted using a multiphoton microscope confirmed the important function of MN arrays in the localisation of proteins and NPs in the scleral tissue. Furthermore, the polymers selected to prepare bilayer MNs and OVA NPs were determined to be biocompatible with retinal cells (ARPE-19). This delivery approach could potentially sustain the release of encapsulated proteins for more than two months and effectively bypass the scleral barrier, leading to a promising therapy for treating neovascular ocular diseases.

Aliphatic Polyester-Based Materials for Enhanced Cancer Immunotherapy

Poly(lactic acid) (PLA) and its copolymer, poly(lactic-co-glycolic acid) (PLGA), based aliphatic polyesters have been extensively used for biomedical applications, such as drug delivery system and tissue engineering, thanks to their biodegradability, benign toxicity, renewability, and adjustable mechanical properties. A rapidly growing field of cancer research, the development of therapeutic cancer vaccines or treatment modalities is aimed to deliver immunomodulatory signals that control the quality of immune responses against tumors. Herein, the progress and applications of PLA and PLGA are reviewed in delivering immunotherapeutics to treat cancers.

Role of lipid nanocarriers for enhancing oral absorption and bioavailability of insulin and GLP-1 receptor agonists

Growing demand for insulin and glucagon-like peptide-1 receptor agonists (GLP-1 RA) is observed, considering the progressive nature of diabetes and the potential therapeutic role of peptides in its treatment. However, chronic parenteral administration is responsible for pain and rashes at the site of injection. Oral delivery of insulin and GLP-1 RA promises better patient compliance owing to their ease of administration and reduction in chances of peripheral hypoglycaemia and weight gain. The review article discusses the potential of lipid carriers in combination with different strategies such as absorption enhancers, PEGylation, lipidisation, etc. The lipid nanocarriers improve the membrane permeability and oral bioavailability of high molecular weight peptides. Additionally, the clinical status of different nanocarriers for anti-diabetic peptides is discussed. Previous research on nanocarriers showed significant hypoglycaemic activity and safety in animal studies; however, extrapolation of the same in human subjects is not validated. With the rising global burden of diabetes, the lipid nanocarriers show the potential to revolutionise treatment with oral delivery of insulin and GLP-1 RA.

Encapsulation of Andrographolide in poly(lactide-co-glycolide) Nanoparticles: Formulation Optimization and in vitro Efficacy Studies

Andrographolide is a potential chemopreventive and chemotherapeutic agent that suffers from poor aqueous solubility. Encapsulation in poly(lactide-co-glycolide) (PLGA) nanoparticles can overcome solubility issues and enable sustained release of the drug, resulting in improved therapeutic efficacy. In this study, andrographolide was encapsulated in PLGA nanoparticles via emulsion solvent evaporation technique. Effect of various formulation parameters including polymer composition, polymer molecular weight, polymer to drug ratio, surfactant concentration and the organic solvent used on nanoparticle properties were investigated. A selected formulation was used to determine the effect of encapsulation in nanoparticles on andrographolide's in vitro anticancer efficacy. Nanoparticles formulated using a polymer with 85:15 lactide to glycolide ratio and ethyl acetate as the organic solvent were found to be optimal based on average hydrodynamic particle size (135 ± 4 nm) and drug loading (2.6 ± 0.6%w/w). This formulation demonstrated sustained release of andrographolide over 48 h and demonstrated significantly greater in vitro anticancer efficacy compared to free drug in a metastatic breast cancer cell line. These results suggest that additional, more in-depth efficacy studies are warranted for the nanoparticle formulation of andrographolide.

Photochemical internalization (PCI)-mediated activation of CD8 T cells involves antigen uptake and CCR7-mediated transport by migratory dendritic cells to draining lymph nodes

Antigen cross-presentation to cytotoxic CD8⁺ T cells is crucial for the induction of anti-tumor and anti-viral immune responses. Recently, co-encapsulation of photosensitizers and antigens into microspheres and subsequent photochemical internalization (PCI) of antigens in antigen presenting cells has emerged as a promising new strategy for inducing antigen-specific CD8⁺ T cell responses in vitro and in vivo. However, the exact cellular mechanisms have hardly been investigated in vivo, i.e., which cell types take up antigen-loaded microspheres at the site of injection, or in which secondary lymphoid organ does T cell priming occur? We used spray-dried poly(lactic-co-glycolic acid) (PLGA) microspheres loaded with ovalbumin and the photosensitizer tetraphenyl chlorine disulfonate (TPCS_2a) to investigate these processes in vivo. Intravital microscopy and flow cytometric analysis of the murine ear skin revealed that dendritic cells (DCs) take up PLGA microspheres in peripheral tissues. Illumination then caused photoactivation of TPCS_2a and induced local tissue inflammation that enhanced CCR7-dependent migration of microsphere-containing DCs to tissue-draining lymph nodes (LNs), i.e., the site of CD8⁺ T cell priming. The results contribute to a better understanding of the functional mechanism of PCI-mediated vaccination and highlight the importance of an active transport of vaccine microspheres by antigen presenting cells to draining LNs.

Impact of Excipients on Stability of Polymer Microparticles for Autoimmune Therapy

Therapies for autoimmune diseases such as multiple sclerosis and diabetes are not curative and cause significant challenges for patients. These include frequent, continued treatments required throughout the lifetime of the patient, as well as increased vulnerability to infection due to the non-specific action of therapies. Biomaterials have enabled progress in antigen-specific immunotherapies as carriers and delivery vehicles for immunomodulatory cargo. However, most of this work is in the preclinical stage, where small dosing requirements allow for on-demand preparation of immunotherapies. For clinical translation of these potential immunotherapies, manufacturing, preservation, storage, and stability are critical parameters that require greater attention. Here, we tested the stabilizing effects of excipients on the lyophilization of polymeric microparticles (MPs) designed for autoimmune therapy; these MPs are loaded with peptide self-antigen and a small molecule immunomodulator. We synthesized and lyophilized particles with three clinically relevant excipients: mannitol, trehalose, and sucrose. The biophysical properties of the formulations were assessed as a function of excipient formulation and stage of addition, then formulations were evaluated in primary immune cell culture. From a manufacturing perspective, excipients improved caking of lyophilized product, enabled more complete resuspension, increased product recovery, and led to smaller changes in MP size and size distribution over time. Cocultures of antigen-presenting cells and self-reactive T cells revealed that MPs lyophilized with excipients maintained tolerance-inducing function, even after significant storage times without refrigeration. These data demonstrate that excipients can be selected to drive favorable manufacturing properties without impacting the immunologic properties of the tolerogenic MPs.

Ultrasmall gold and silver/gold nanoparticles (2 nm) as autofluorescent labels for poly(D,L-lactide-co-glycolide) nanoparticles (140 nm)

Ultrasmall metallic nanoparticles show an efficient autofluorescence after excitation in the UV region, combined with a low degree of fluorescent bleaching. Thus, they can be used as fluorescent labels for polymer nanoparticles which are frequently used for drug delivery. A versatile water-in-oil-in-water emulsion-evaporation method was developed to load poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles with autofluorescent ultrasmall gold and silver/gold nanoparticles (diameter 2 nm). The metallic nanoparticles were prepared by reduction of tetrachloroauric acid with sodium borohydride and colloidally stabilised with 11-mercaptoundecanoic acid. They were characterised by UV-Vis and fluorescence spectroscopy, showing a large Stokes shift of about 370 nm with excitation maxima at 250/270 nm and emission maxima at 620/640 nm for gold and silver/gold nanoparticles, respectively. The labelled PLGA nanoparticles (140 nm) were characterised by dynamic light scattering (DLS), scanning electron microscopy (SEM), and UV-Vis and fluorescence spectroscopy. Their uptake by HeLa cells was followed by confocal laser scanning microscopy. The metallic nanoparticles remained inside the PLGA particle after cellular uptake, demonstrating the efficient encapsulation and the applicability to label the polymer nanoparticle. In terms of fluorescence, the metallic nanoparticles were comparable to fluorescein isothiocyanate (FITC).

Bioengineered elastin- and silk-biomaterials for drug and gene delivery

Advances in medical science have led to diverse new therapeutic modalities, as well as enhanced understanding of the progression of various disease states. These findings facilitate the design and development of more customized and exquisite drug delivery systems that aim to improve therapeutic indices of drugs to treat a variety of conditions. Synthetic polymer-based drug carriers have often been the focus of such research. However, these structures suffer from challenges with heterogeneity of the starting material, limited chemical features, complex functionalization methods, and in some cases a lack of biocompatibility. Consequently, protein-based polymers have garnered much attention in recent years due to their monodisperse features, ease of production and functionalization, and biocompatibility. Genetic engineering techniques enable the advancement of protein-based drug delivery systems with finely tuned physicochemical properties, and thus an expanded level of customization unavailable with synthetic polymers. Of these genetically engineered proteins, elastin-like proteins (ELP), silk-like proteins (SLP), and silk-elastin-like proteins (SELP) provide a unique set of alternatives for designing drug delivery systems due to their inherent chemical and physical properties and ease of engineering afforded by recombinant DNA technologies. In this review we examine the advantages of genetically engineered drug delivery systems with emphasis on ELP and SLP constructions. Methods for fabrication and relevant biomedical applications will also be discussed.

A Comparison of Chitosan, Mesoporous Silica and Poly(lactic-co-glycolic) Acid Nanocarriers for Optimising Intestinal Uptake of Oral Protein Therapeutics

Efficacious oral delivery of therapeutic proteins remains challenging and nanoparticulate approaches are gaining interest for enhancing their permeability. In this study, we explore the ability for three comparably sized nanocarriers, with diverse physicochemical properties [i.e., chitosan (CSNP), mesoporous silica nanoparticles (MSNP) and poly(lactic-co-glycolic) acid (PLGA-NP)], to successfully facilitate epithelial uptake of a model protein, ovalbumin (OVA). We report the effect of nanoparticle surface chemistry and nanostructure on protein release, cell toxicity and the uptake mechanism in a Madin Darby Canine Kidney (MDCK) cell model of the intestinal epithelium. All nanocarriers exhibited bi-phasic OVA release kinetics with sustained and incomplete release after 4 days, and more pronounced release from MSNP than either polymeric nanocarriers. CSNP and MSNP displayed the highest cellular uptake, however CSNP was prone to significant dose-dependent toxicity attributed to the cationic surface charge. Approximately 25% of MSNP uptake was governed by a clathrin-independent endocytic mechanism, while CSNP and PLGA-NP uptake was not controlled via any endocytic mechanisms investigated herein. Furthermore, endosomal localisation was observed for CSNP and MSNP, but not for PLGA-NP. These findings may assist in the optimal choice and engineering of nanocarriers for specific intestinal permeation enhancement for oral protein delivery.

Smac peptide and doxorubicin-encapsulated nanoparticles: design, preparation, computational molecular approach and in vitro studies on cancer cells

The N-terminal sequence of the Smac (second-mitochondria derived activator) protein is known to be involved in binding to the BIR3 (Baculovirus IAP repeat) domain of the IAPs (inhibitors of apoptosis proteins), and antagonized their function. Short peptides derived from N-terminal residues of Smac have shown to sensitize cancer cells to chemotherapeutic agents. In this regard, small library including 6-mer peptides were designed using docking to the BIR3 domain of cIAP1 in silico. Molecular dynamics simulation studies were also done on top-scored hits (SmacAQ, SmacIQ) using Desmond 2017-2 for 150 ns simulation time. These two peptides were conveniently synthesized using solid phase peptide synthesis on Fmoc-Gln (Trt)-Wang resin. Furthermore, we encapsulated DOX (doxorubicin) and synthesized peptides in PLGA: PLGA-PEG (9:1) NPs (nanoparticles) followed by MD (molecular dynamic) studies to understand the NP structure and the interactions between either DOX or peptide with polymeric nanoparticles during 100 ns simulation. Finally, the cytotoxic activity of these peptides in combination with DOX against two cancer cell lines including MCF7 and C26 were investigated. As a result, we found that DOX or peptide-loaded NPs had stable structure during the simulation. MD simulation also showed that alanine at N-terminal of Smac could be replaced with isoleucine without alternation of biological activity which was in agreement with in vitro experiments. Moreover, NPs-SmacIQ and NPs-SmacAQ significantly enhanced the cytotoxicity effect of NPs-DOX in vitro (p < 0.001).Communicated by Ramaswamy H. Sarma.

Comparative Nanofabrication of PLGA-Chitosan-PEG Systems Employing Microfluidics and Emulsification Solvent Evaporation Techniques

Poor circulation stability and inadequate cell membrane penetration are significant impediments in the implementation of nanocarriers as delivery systems for therapeutic agents with low bioavailability. This research discusses the fabrication of a biocompatible poly(lactide-co-glycolide) (PLGA) based nanocarrier with cationic and hydrophilic surface properties provided by natural polymer chitosan and coating polymer polyethylene glycol (PEG) for the entrapment of the hydrophobic drug disulfiram. The traditional emulsification solvent evaporation method was compared to a microfluidics-based method of fabrication, with the optimisation of the parameters for each method, and the PEGylation densities on the experimental nanoparticle formulations were varied. The size and surface properties of the intermediates and products were characterised and compared by dynamic light scattering, scanning electron microscopy and X-ray diffraction, while the thermal properties were investigated using thermogravimetric analysis and differential scanning calorimetry. Results showed optimal particle properties with an intermediate PEG density and a positive surface charge for greater biocompatibility, with nanoparticle surface characteristics shielding physical interaction of the entrapped drug with the exterior. The formulations prepared using the microfluidic method displayed superior surface charge, entrapment and drug release properties. The final system shows potential as a component of a biocompatible nanocarrier for poorly soluble drugs.

Silk Fibroin Microneedle Patches for the Sustained Release of Levonorgestrel

The sustained release of levonorgestrel, a contraceptive, from silk-based microneedle patches was demonstrated for transdermal delivery. Modifications in the formulation of the silk protein and drug loading enabled the tuning of drug loading and release rates from the microneedle patches over time. Sustained drug release reached up to 100 days when the drug was loaded directly inside the microneedles, while release continued for more than a year when the drug was loaded inside microparticles prior to casting inside the microneedle patches. When coupled with the shelf-stable, refrigeration-less features of the silk protein matrix utilized in the microneedle fabrication, these findings suggest that long-acting contraception patches are feasible. This advance could provide practical options for women to have access to new options for protection against unwanted pregnancy.

Combination therapy using Smac peptide and doxorubicin-encapsulated MUC 1-targeted polymeric nanoparticles to sensitize cancer cells to chemotherapy: An in vitro and in vivo study

Targeting inhibitors of apoptosis proteins (IAPs) family comprising high level expression in many cancer cells, could sensitize tumor cells to conventional chemotherapies. In the present study, we designed both doxorubicin and SmacN6 (an antagonist of the IAPs) encapsulated polymeric nanoparticles (NPs) and investigated their synergistic effect of combination therapy in vitro and in vivo. According to the results, NPs-SmacN6 significantly enhanced the cytotoxicity effect of NPs-DOX and reduced its IC₅₀ in MCF-7, 4T1 and C26 cancer cells. Western blot analysis confirmed mechanism of cell apoptosis via caspase activation through intrinsic and also extrinsic pathways. Moreover, 5TR1 aptamer-modified NPs could effectively deliver DOXor SmacN6 to C26 cancer cells (MUC1 positive) in comparison with the non-targeted one (p < 0.001). However, they could not be efficiently internalized into CHO cells (MUC1 negative), showing less cytotoxicity in this cell line. In vivo experiments in BALB/c mice bearing C26 tumor indicated that Apt-NPs-DOX in combination with Apt-NPs-SmacN6 had significant tumor growth inhibition in comparison with mice receiving either free DOX or Apt-NPs-DOX with p < 0.0001 and p < 0.05, respectively. Our results revealed that combination therapy of DOX and SmacN6 via Apt-modified nanoparticles can lead to improvement of therapeutic index of DOX in MUC1 positive cancer cells.

Nanoparticle-Based Vaccines for Brucellosis: Calcium Phosphate Nanoparticles-Adsorbed Antigens Induce Cross Protective Response in Mice

Introduction

Vaccine formulation with appropriate adjuvants is an attractive approach to develop protective immunity against pathogens. Calcium phosphate nanoparticles (CaPNs) are considered as ideal adjuvants and delivery systems because of their great potential for enhancing immune responses. In the current study, we have designed nanoparticle-based vaccine candidates to induce immune responses and protection against B. melitensis and B. abortus.

Materials and Methods

For this purpose, we used three Brucella antigens (FliC, 7α-HSDH, BhuA) and two multi-epitopes (poly B and poly T) absorbed by CaPNs. The efficacy of each formulation was evaluated by measuring humoral, cellular and protective responses in immunized mice.

Results

The CaPNs showed an average size of about 90 nm with spherical shape and smooth surface. The CaPNs-adsorbed proteins displayed significant increase in cellular and humoral immune responses compared to the control groups. In addition, our results showed increased ratio of specific IgG2a (associated with Th1) to specific IgG1 (associated with Th2). Also, immunized mice with different vaccine candidate formulations were protected against B. melitensis 16M and B. abortus 544, and showed same levels of protection as commercial vaccines (B. melitensis Rev.1 and B. abortus RB51) except for BhuA-CaPNs.

Discussion

Our data support the hypothesis that these antigens absorbed with CaPNs could be effective vaccine candidates against B. melitensis and B. abortus.

Quality by design thinking in the development of long-acting injectable PLGA/PLA-based microspheres for peptide and protein drug delivery

Adopting the Quality by Design (QbD) approach in the drug development process has transformed from "nice-to-do" into a crucial and required part of the development, ensuring the quality of pharmaceutical products throughout their whole life cycles. This review is discussing the implementation of the QbD thinking into the production of long-acting injectable (LAI) PLGA/PLA-based microspheres for the therapeutic peptide and protein drug delivery. Various key elements of the QbD approaches are initially elaborated using Bydureon®, a commercial product of LAI PLGA/PLA-based microspheres, as a classical example. Subsequently, the factors influencing the release patterns and the stability of the peptide and protein drugs are discussed. This is followed by a summary of the state-of-the-art of manufacturing LAI PLGA/PLA-based microspheres and the related critical process parameters (CPPs). Finally, a landscape of generic product development of LAI PLGA/PLA-based microspheres is reviewed including some major challenges in the field.

Modulation of protein release from penta-block copolymer microspheres

Releasing a protein according to a zero-order profile without protein denaturation during the polymeric microparticle degradation process is very challenging. The aim of the current study was to develop protein-loaded microspheres with new PLGA based penta-block copolymers for a linear sustained protein release. Lysozyme was chosen as model protein and 40 µm microspheres were prepared using the solid-in-oil-in-water solvent extraction/evaporation process. Two types of PLGA-P188-PLGA penta-block copolymers were synthetized with two PLGA-segments molecular weight (20 kDa or 40 kDa). The resulting microspheres (50P20-MS and 50P40-MS) had the same size, an encapsulation efficiency around 50-60% but different porosities. Their protein release profiles were complementary: linear but non complete for 50P40-MS, non linear but complete for 50P20-MS. Two strategies, polymer blending and microsphere mixing, were considered to match the release to the desired profile. The (1:1) microsphere mixture was successful. It induced a bi-phasic release with a moderate initial burst (around 13%) followed by a nearly complete linear release for 8 weeks. This study highlighted the potential of this penta-block polymer where the PEO block mass ratio influence clearly the Tg and consequently the microsphere structure and the release behavior at 37 °C. The (1:1) mixture was a starting point but could be finely tuned to control the protein release.