Mucoadhesive Hydrogel Nanoparticles as Smart Biomedical Drug Delivery System

An overview of the efficacy of inhaled curcumin: a new mode of administration for an old molecule

INTRODUCTION

Curcumin is a polyphenol with a variety of pharmacological actions. Despite its therapeutic effects and well-known safety profile, the utility of curcumin has been limited due to its deprived physical, chemical, and pharmacokinetic profile resulting from limited solubility, durability, prompt deterioration and pitiable systemic availability. Employment of an amalgamated framework integrating the potential advantages of a nanoscaffold alongside the beneficial traits of inhalational drug delivery system beautifully bringing down the restricting attributes of intended curative interventions and further assures its clinical success.

AREAS COVERED

Current review discussed different application of inhalable nanocurcumin in different medical conditions. Lung diseases have been the prime field in which inhalable nanocurcumin had resulted in significant beneficial effects. Apart from this several lung protective potentials of the inhaled nanocurcumin have been discussed against severe pulmonary disorders such as pulmonary fibrosis, radiation pneumonitis and IUGR induced bronchopulmonary dysplasia. Also, application of the disclosed intervention in the clinical management of COVID-19 and Alzheimer's Disease has been discussed.

EXPERT OPINION

In this portion, the potential of inhalable nanocurcumin in addressing various medical conditions along with ongoing advancements in nanoencapsulation techniques and the existing challenges in transitioning from pre-clinical models to clinical practice has been summarized.

Carrageenan films as promising mucoadhesive ocular drug delivery systems

Polymer mucoadhesive films being developed for use in ophthalmology represent a new tool for drug delivery and are considered an alternative to traditional dosage forms. Due to their mucoadhesive properties, carrageenans (CRGs) are widely used in various forms for drug delivery. In this study, films based on CRGs of various structural types (κ/β, κ, x, and λ) for use in ophthalmology were studied. The films were loaded with the active substance echinochrome (ECH), a sea urchin pigment used in ophthalmology. Spectral data showed that ECH remained stable after its incorporation into the CRG films and did not oxidize for at least six months. Hydrophilic CRG films with a thickness of 10-12 µm were characterized in terms of their swelling and mucoadhesive properties. The rheological properties of solutions formed after film dissolution in artificial tears were also assessed. κ- and κ/β-CRG films with ECH exhibited pseudoplastic behavior after rehydrating films with an artificial tear solution. The CRG-loaded films had different swelling characteristics depending on the structure of the CRG used. The films based on highly sulfated CRGs dissolved in artificial tears, while the films of low-sulfated κ/β-CRG exhibited limited swelling. All studied ECH-loaded films exhibited mucoadhesive properties, which were evaluated by a texture analyzer using mucous tissue of the small intestine of the pig as a model. There was a slight prolongation of ECH release from CRG films in artificial tears. The effect of CRG/ECH on the epithelial cell lines of the outer shell of the human eye was investigated. At low concentrations, ECH in the composition of the CRG/ECH complex had no cytotoxic effect on corneal epithelial and conjunctival human cells. The use of ECH-containing films can prevent the drug from being immediately washed away by tears and help to retain it by increasing viscosity and having mucoadhesive properties.

The characterization of the pectin/alginate nanoparticle for encapsulation of hydroxypropyl-β-cyclodextrin-complexed naringin and its effects on cellular uptake and oxidative stress in Caco-2 cells

Naringin (NR) and hydroxypropyl-β-cyclodextrin (HPCD) can form a water-soluble complex, but it is unstable. This study aimed to investigate the characterization of the pectin/alginate hydrogel nanoparticles (HNPs) loading HPCD-complexed naringin. The encapsulation efficiency and loading capacity of the HNPs for NR were found to be 79.23 % ± 1.31 % and 23.79 % ± 0.67 %, respectively. HNPs had an average diameter of 409.5 ± 8.5 nm, a PDI of 0.237 ± 0.014, and a zeta-potential of -33.5 ± 0.2. FTIR, XRD, and DSC analysis confirmed that the NR-HPCD complex was embedded into the HNPs. In simulated gastrointestinal digestion, the HNPs exhibited a lower cumulative release rate compared to free NR. In Caco-2 cells, the HNPs were more efficiently transported into the cells. Consequently, the HNPs resulted in a greater decrease in ROS levels, more recovery of mitochondrial membrane potential and higher content of glutathione. This study provided a carrier for encapsulating NR, making it possible for use in food or functional food.

Mucoadhesive capsules based on bacterial nanocellulose and chitosan as delivery system of turmeric extract

Current efforts in stomach-related drug design focus on improving drug bioavailability within the gastric region. Bacterial nanocellulose (BNC) has been established as a suitable material for drug delivery systems; however, it lacks adhesion to the gastric environment. This limitation can be addressed by leveraging the mucoadhesive properties of low molecular weight chitosan (LMWC). Therefore, we aimed to develop mucoadhesive capsules constructed from BNC coated with crosslinked LMWC, intended for targeted drug delivery in the gastric region. The capsules were characterized using scanning electron microscopy, infrared spectroscopy, thermogravimetric analysis, and mucoadhesion assessments. Under acidic conditions, crosslinked chitosan exhibited enhanced swelling relative to neutral conditions. The coating of chitosan onto the BNC fibrillar network of the capsules resulted in the superimposition of vibration bands and enhanced thermal stability. Furthermore, the capsules exhibited significant mucoadhesive properties in the gastric environment, with an attachment force measuring 89.151 ± 6.226 mN. To validate the efficacy of the system, we utilized antioxidant turmeric extract (TE) as a bioactive compound with chemopreventive potential against stomach cancer. TE was adsorbed onto BNC in a reversible multilayer system, enabling controlled adsorption and desorption. These findings highlight the significance of developing mucoadhesive capsules as a tailored drug delivery system for gastric conditions, particularly in the context of treating stomach diseases as cancer.

Formulation and optimization of theophylline-loaded enteric-coated spanlastic nanovesicles for colon delivery; Ameliorate acetic acid-induced ulcerative colitis

Treatment of colon diseases presents one of the most significant obstacles to drug delivery due to the inability to deliver sufficient drug concentration selectively to the colon. The goal of the proposed study was to develop, optimize, and assess an effective colon target delivery system of theophylline-based nanovesicles (TP-NVs) surrounded by a biodegradable polymeric shell of chitosan (CS) and Eudragit L100 (EL100) for the treatment of ulcerative colitis (UC). TP-loaded nanovesicles were fabricated using the ethanol injection method and coated with CS and EL100, respectively. We used a 32-factorial design approach to optimize the concentration of CS and EL100 to minimize particle size (PS) and maximize the cumulative amount of theophylline released (CTR) after 24 h. The optimized formulation was described using transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and in vitro release. In-vivo quantification of theophylline in the gastrointestinal tract and in-vivo targeting potential in a rat model of acetic acid-induced colitis were also thoroughly evaluated. The characteristics of the optimal formula predicted by the 32-factorial design approach corresponded exceptionally well with the measured PS of 271.3 nm, the zeta potential of -39.9 mV, and CTR of 3.95, and a 99.93% after 5 and 24 h, respectively. Notably, the in vivo results in the rat model of colitis showed that the formulation with an optimized coat significantly improved theophylline distribution to the colon and markedly decreased the expression of interleukin-6 and ulcerative lesions compared to a pure theophylline solution. These outcomes elucidated the feasibility of a 32-factorial design to detect the crucial interactions between the study's components. Our findings suggested that enteric-coated nanovesicles formulations with optimal coat compositions of 0.2693% (w/v) and 0.75% (w/v) of CS and EL100, respectively, were promising carriers for colonic delivery of theophylline, a rate-limiting step in the treatment of UC.

Bigels as Delivery Systems: Potential Uses and Applicability in Food

Bigels have been mainly applied in the pharmaceutical sector for the controlled release of drugs or therapeutics. However, these systems, with their intricate structures, hold great promise for wider application in food products. Besides their classical role as carrier and target delivery vehicles for molecules of interest, bigels may also be valuable tools for building complex food structures. In the context of reducing or even eliminating undesirable (but often highly functional) food components, current strategies often critically affect food structure and palatability. The production of solid fat systems that are trans-fat-free and have high levels of unsaturated fatty acids is one of the challenges the food industry currently faces. According to recent studies, bigels can be successfully used as ingredients for total or partial solid fat replacement in complex food matrices. This review aims to critically assess current research on bigels in food and pharmaceutical applications, discuss the role of bigel composition and production parameters on the characteristics of bigels and further expand the use of bigels as solid fat replacers and functional food ingredients. The hydrogel:oleogel ratio, selected gelators, inclusion of surfactants and encapsulation of molecules of interest, and process parameters (e.g., temperature, shear rate) during bigel production play a crucial role in the bigel's rheological and textural properties, microstructure, release characteristics, biocompatibility, and stability. Besides exploring the role of these parameters in bigel production, future research directions for bigels in a food context are explored.

Alginate Nanoencapsulated Synbiotic Composite of Pomegranate Peel Phytogenics and Multi-Probiotic Species as a Potential Feed Additive: Physicochemical, Antioxidant, and Antimicrobial Activities

A synbiotic composed of alginate nanoencapsulated prebiotic (pomegranate peel phytogenics) and multi-species probiotics (Lactococcus lactis, Lactobacillus plantarum, Lactobacillus paracasei, and Saccharomyces cerevisiae) has been developed as a potential eco-friendly alternative to antibiotics. The physicochemical properties of the encapsulated synbiotic were evaluated, and its gastric and storage tolerance, as well as its antioxidant and antimicrobial activity, were tested and compared to that of the non-encapsulated synbiotic (free synbiotic). The results showed that the prebiotic pomegranate peel ethanolic extract contained seven phenolic compounds, with cinnamic being the most abundant (13.26 µL/mL). Sodium alginate-CaCl2 nanocapsules were effective in encapsulating 84.06 ± 1.5% of the prebiotic's phenolic compounds and 98.85 ± 0.57% of the probiotics. The particle size of the alginate-CaCl2 nanoencapsulated synbiotic was 544.5 nm, and the polydispersity index and zeta potential values were 0.593 and -12.3 mV, respectively. Thermogravimetric analysis showed that the alginate-CaCl2 nanoencapsulated synbiotic had high thermal stability at high temperatures, with only 2.31% of its weight being lost within the temperature range of 70-100 °C. The count of viable probiotics in the nanoencapsulated synbiotic was significantly higher than that in the free synbiotic after exposure to gastric acidity and storage for six months at room temperature. The percent inhibition values of the nanoencapsulated synbiotic and ascorbic acid (as a standard antioxidant) were comparable and significantly greater than those of the free synbiotic. The half-maximal inhibitory concentrations (IC50) of the nanoencapsulated synbiotic and ascorbic acid were significantly lower than those of the free synbiotic (3.96 ± 0.42 µg/mL and 4.08 ± 0.79 µg/mL for nanoencapsulated synbiotic and ascorbic acid, respectively, vs. 65.75 ± 2.14 µg/mL for free synbiotic). The nanoencapsulated synbiotic showed the highest significant antimicrobial activity against Escherichia coli (ATCC 8739). Both the nanoencapsulated and free synbiotics showed antimicrobial activity against Staphylococcus aureus (ATCC 6538), similar to that of gentamicin, although the nanoencapsulated synbiotic showed significantly higher inhibition activity compared to the free synbiotic. The nanoencapsulated synbiotic showed antimicrobial activity comparable to gentamicin against Pseudomonas aeruginosa (ATCC 90274), whereas the free synbiotic showed the least antimicrobial activity (p < 0.05). Both synbiotics showed significantly higher antimicrobial activity against Salmonella typhi (ATCC 6539) than gentamicin. Both synbiotics showed antifungal activity against Aspergillus niger and Aspergillus flavus, with a stronger effect observed for the nanoencapsulated synbiotic. However, the activity of both synbiotics was significantly lower than that of fluconazole (an antifungal drug).

Tannic acid-coated cellulose nanocrystals with enhanced mucoadhesive properties for aquaculture

Mucoadhesion can be exploited as a strategy to target drug and nutrient delivery to the outer mucosal layers of fish in aquaculture farms. Cellulose nanocrystals (CNC) derived from cellulose pulp fibers can interact with the mucosal membranes via hydrogen bonding, however, their mucoadhesive properties are weak and should be enhanced. In this study, CNC were coated with tannic acid (TA), a plant polyphenol with excellent wet-resistant bioadhesive properties, to strengthen their mucoadhesive capability. The optimal CNC:TA mass ratio was determined to be 20:1. The modified CNCs were 190 ± 40 nm in length and 21 ± 4 nm wide and displayed excellent colloidal stability, with a zeta potential of -35 mV. Turbidity titrations and rheological measurements revealed that the modified CNC possessed superior mucoadhesive properties compared to pristine CNC. Modification with tannic acid introduced additional functional groups for stronger hydrogen bond formation and hydrophobic interactions with mucin, which was confirmed by a large reduction in viscosity enhancement values in the presence of chemical blockers (urea and Tween80). The enhanced mucoadhesion of the modified CNC could be utilized for the fabrication of a mucoadhesive drug delivery system to promote sustainable aquaculture practices.

An inhaled bioadhesive hydrogel to shield non-human primates from SARS-CoV-2 infection

The surge of fast-spreading SARS-CoV-2 mutated variants highlights the need for fast, broad-spectrum strategies to counteract viral infections. In this work, we report a physical barrier against SARS-CoV-2 infection based on an inhalable bioadhesive hydrogel, named spherical hydrogel inhalation for enhanced lung defence (SHIELD). Conveniently delivered via a dry powder inhaler, SHIELD particles form a dense hydrogel network that coats the airway, enhancing the diffusional barrier properties and restricting virus penetration. SHIELD's protective effect is first demonstrated in mice against two SARS-CoV-2 pseudo-viruses with different mutated spike proteins. Strikingly, in African green monkeys, a single SHIELD inhalation provides protection for up to 8 hours, efficiently reducing infection by the SARS-CoV-2 WA1 and B.1.617.2 (Delta) variants. Notably, SHIELD is made with food-grade materials and does not affect normal respiratory functions. This approach could offer additional protection to the population against SARS-CoV-2 and other respiratory pathogens.

Development of chitosan-polygalacturonic acid polyelectrolyte complex fibrous scaffolds using the hydrothermal treatment for bone tissue engineering

An ideal bone regeneration scaffold system needs to meet the high compressive properties of the bone. The stiffness of the scaffold extracellular matrix determines the cell's fate via cell adhesion migration and differentiation in-vitro and in-vivo. This study aims to investigate the effect of hydrothermal treatment on polyelectrolyte complex (PEC) fibrous biomaterials and its effect on scaffold morphology, cell viability, and function in-vitro. FTIR analysis revealed the ability of the thermal treatment to set the interaction of HAp with polymeric PEC fibers. FESEM analysis showed that with an increase in temperature, the interconnectivity and pore size increased (control-82.38 ± 12.92 μm; at 120°C-335.48 ± 85.10 μm). Mechanical tests showed that the scaffolds heated at 90°C showed the highest stiffness in both dry and wet states (dry state: 1.82 ± 0.07 MPa, wet state: 122 ± 1.78 kPa). Additionally, the hydrothermal treatment also improved the aqueous stability as well as swelling capacity. According to the experimental findings, hydrothermal treatment is a useful technique for crosslinker-free gelation with improved mechanical strength and nanofibrous structure. Furthermore, the cell adhesion, proliferation, and osteogenic differentiation of the MG63 cells on the hydrogel scaffolds in-vitro were evaluated by MTT assay, confocal imaging, alkaline phosphatase assay, and collagen estimation. The in-vitro study showed that scaffolds fabricated at 90°C promoted better MG63 cell attachment, proliferation, and differentiation. These results suggest the potential use of hydrothermal treated chitosan-polygalacturonic acid (PgA) fibrous scaffolds in bone tissue engineering.

Thiolated Polymeric Hydrogels for Biomedical Applications: A Review

Hydrogels are a three-dimensional (3D) network of hydrophilic polymers. The physical and chemical crosslinking of polymeric chains maintains the structure of the hydrogels even when they are swollen in water. They can be modified with thiol by thiol epoxy, thiol-ene, thiol-disulfide, or thiol-one reactions. Their application as a matrix for protein and drug delivery, cellular immobilization, regenerative medicine, and scaffolds for tissue engineering was initiated in the early 21st century. This review focuses on the ingredients, classification techniques, and applications of hydrogels, types of thiolation by different thiol-reducing agents, along with their mechanisms. In this study, different applications for polymers used in thiolated hydrogels, including dextran, gelatin, polyethylene glycol (PEG), cyclodextrins, chitosan, hyaluronic acid, alginate, poloxamer, polygalacturonic acid, pectin, carrageenan gum, arabinoxylan, carboxymethyl cellulose (CMC), gellan gum, and polyvinyl alcohol (PVA) are reviewed.

Mucoadhesive Polymers and Their Applications in Drug Delivery Systems for the Treatment of Bladder Cancer

Bladder cancer (BC) is the tenth most common type of cancer worldwide, affecting up to four times more men than women. Depending on the stage of the tumor, different therapy protocols are applied. Non-muscle-invasive cancer englobes around 70% of the cases and is usually treated using the transurethral resection of bladder tumor (TURBIT) followed by the instillation of chemotherapy or immunotherapy. However, due to bladder anatomy and physiology, current intravesical therapies present limitations concerning permeation and time of residence. Furthermore, they require several frequent catheter insertions with a reduced interval between doses, which is highly demotivating for the patient. This scenario has encouraged several pieces of research focusing on the development of drug delivery systems (DDS) to improve drug time residence, permeation capacity, and target release. In this review, the current situation of BC is described concerning the disease and available treatments, followed by a report on the main DDS developed in the past few years, focusing on those based on mucoadhesive polymers as a strategy. A brief review of methods to evaluate mucoadhesion properties is also presented; lastly, different polymers suitable for this application are discussed.

Layered Double Hydroxides-Loaded Sorafenib Inhibit Hepatic Stellate Cells Proliferation and Activation In Vitro and Reduce Fibrosis In Vivo

A core feature of liver fibrosis is the activation of hepatic stellate cells (HSCs), which are transformed into myofibroblasts and lead to the accumulation of extracellular matrix (ECM) proteins. In this study, we combined in vitro cellular efficacy with in vivo antifibrosis performance to evaluate the outcome of sorafenib (SRF) loaded layered double hydroxide (LDH) nanocomposite (LDH-SRF) on HSCs. The cellular uptake test has revealed that sorafenib encapsulated LDH nanoparticles were efficiently internalized by the HSC-T6 cells, synergistically inducing apoptosis of hepatic stellate cells. Moreover, the apoptosis rate and the migration inhibition rate induced by LDHs-SRF were 2.5 and 1.7 times that of SRF. Western Blot showed that the TGF-β1/Smad/EMT and AKT signaling pathway was significantly inhibited in HSC-T6 cells treated with LDHs-SRF. For the in vivo experiment, LDHs-SRF were administered to rat models of CCl₄-induced liver fibrosis. H&E, masson and sirius red staining showed that LDHs-SRF could significantly reduce inflammatory infiltrate and collagen fiber deposition and immunohistochemical results found that LDHs-SRF treatment significantly inhibited the protein expressions of α-SMA in the liver, these results suggesting that LDHs-SRF exhibited better anti-fibrotic effect than SRF alone and significantly inhibited the proliferation and activation of rat hepatic stellate cells and collagen fiber synthesis.

GA&HA-Modified Liposomes for Co-Delivery of Aprepitant and Curcumin to Inhibit Drug-Resistance and Metastasis of Hepatocellular Carcinoma

Background

Tumor microenvironment (TME) plays a vital role in the development of hepatocellular carcinoma (HCC). Mounting evidence indicates that peripheral nerves could induce a shift from quiescent hepatic stellate cells (HSCs) to cancer-associated fibroblasts (CAFs) by secreting substance P (SP). The anti-tumor strategy by targeting “SP-HSCs-HCC” axis might be an effective therapy to inhibit tumor growth and metastasis.

Objective

In this study, we prepared novel liposomes (CUR-APR/HA&GA-LPs) modified with hyaluronic acid (HA) and glycyrrhetinic acid (GA) for co-delivery aprepitant (APR) and curcumin (CUR), in which APR was chosen to inhibit the activation of HSCs by blocking SP/neurokinin-1 receptor (NK-1R), and CUR was used to induce apoptosis of tumor cells.

Results

To mimic the TME, we established “SP+HSCs+HCC” co-cultured cell model in vitro. The results showed that CUR-APR/HA&GA-LPs could be taken up by CAFs and HCC simultaneously, and inhibit tumor cell migration. Meanwhile, the “SP+m-HSCs+HCC” co-implanted mice model was established to evaluate the anti-tumor effect in vivo. The results showed that CUR-APR/HA&GA-LPs could inhibit tumor proliferation and metastasis, and reduce extracellular matrix (ECM) deposition and tumor angiogenesis, indicating a superior anti-HCC effect.

Conclusion

Overall, the combination therapy based on HA&GA-LPs could be a potential nano-sized formulation for anti-HCC therapy.

Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications

With the advent of “intelligent” materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds reopening, chronic pain, and inflammation. Intelligent bioadhesives are free-flowing liquid solutions passing through a phase shift in the physiological environment due to stimuli such as light, temperature, pH, and electric field. They possess great merits, such as ease to access and the ability to sustained release as well as the spatial transfer of a biomolecule with reduced side effects. Tissue engineering, wound healing, drug delivery, regenerative biomedicine, cancer therapy, and other fields have benefited from smart bioadhesives. Recently, many disciplinary attempts have been performed to promote the functionality of smart bioadhesives and discover innovative compositions. However, according to our knowledge, the development of multifunctional bioadhesives for various biomedical applications has not been adequately explored. This review aims to summarize the most recent cutting-edge strategies (years 2015–2021) developed for stimuli-sensitive bioadhesives responding to external stimuli. We first focus on five primary categories of stimuli-responsive bioadhesive systems (pH, thermal, light, electric field, and biomolecules), their properties, and limitations. Following the introduction of principal criteria for smart bioadhesives, their performances are discussed, and certain smart polymeric materials employed in their creation in 2015 are studied. Finally, advantages, disadvantages, and future directions regarding smart bioadhesives for biomedical applications are surveyed.

Combined effect of polyacrylic acid and vitamin E in preventing calcium oxalate crystal deposition in the kidneys of experimental hyperoxaluric rats

Our study explores the combined effect of polyacrylic acid and vitamin E as prophylactic and curative agent against ethylene glycol (EG) induced calcium oxalate stone formation in Wistar rats. Male Wistar rats (54) were divided into nine groups, including control. The experimental groups were equally segregated into two for preventive study (4) and curative study (4). Urolithiasis was induced with 0.75% (v/v) EG in drinking water. Polyacrylic acid (10 mg/kg) and vitamin E (300 IU/day) were supplemented from day 1 for preventive and day 30 for curative studies. Restoration of urinary lithogenic factors (calcium, oxalate, phosphate, citrate and magnesium) and renal function (urea and creatinine in serum) by intervening agents were accomplished compared to urolithic rats (P < .001). Abnormal localization and increased expression of Tamm-Horsfall Protein, osteopontin and transferrin were observed in the kidneys of urolithic rats (P < .001) from immunohistochemistry and immunoblotting analysis. Polyacrylic acid and vitamin E supplementation have regulated the expression of the urinary macromolecules. Pro-inflammatory cytokines in kidney were significantly reduced (P < .001) by the intervening agents compared to urolithic rats. Therefore, polyacrylic acid and vitamin E in combination could be a potential formulation for better management of urolithiasis.

New Insights of Scaffolds Based on Hydrogels in Tissue Engineering

In recent years, biomaterials development and characterization for new applications in regenerative medicine or controlled release represent one of the biggest challenges. Tissue engineering is one of the most intensively studied domain where hydrogels are considered optimum applications in the biomedical field. The delicate nature of hydrogels and their low mechanical strength limit their exploitation in tissue engineering. Hence, developing new, stronger, and more stable hydrogels with increased biocompatibility, is essential. However, both natural and synthetic polymers possess many limitations. Hydrogels based on natural polymers offer particularly high biocompatibility and biodegradability, low immunogenicity, excellent cytocompatibility, variable, and controllable solubility. At the same time, they have poor mechanical properties, high production costs, and low reproducibility. Synthetic polymers come to their aid through superior mechanical strength, high reproducibility, reduced costs, and the ability to regulate their composition to improve processes such as hydrolysis or biodegradation over variable periods. The development of hydrogels based on mixtures of synthetic and natural polymers can lead to the optimization of their properties to obtain ideal scaffolds. Also, incorporating different nanoparticles can improve the hydrogel’s stability and obtain several biological effects. In this regard, essential oils and drug molecules facilitate the desired biological effect or even produce a synergistic effect. This study’s main purpose is to establish the main properties needed to develop sustainable polymeric scaffolds. These scaffolds can be applied in tissue engineering to improve the tissue regeneration process without producing other side effects to the environment.

Silymarin/curcumin loaded albumin nanoparticles coated by chitosan as muco-inhalable delivery system observing anti-inflammatory and anti COVID-19 characterizations in oleic acid triggered lung injury and in vitro COVID-19 experiment

Respiratory infected by COVID-19 represents a major global health problem at moment even after recovery from virus corona. Since, the lung lesions for infected patients are still sufferings from acute respiratory distress syndrome including alveolar septal edema, pneumonia, hyperplasia, and hyaline membranes Therefore, there is an urgent need to identify additional candidates having ability to overcome inflammatory process and can enhance efficacy in the treatment of COVID-19. The polypenolic extracts were integrated into moeties of bovine serum albumin (BSA) and then were coated by chitosan as a mucoadhesion polymer. The results of interleukin-6, and c-reactive protein showed significant reduction in group treated by Encap. SIL + CUR (64 ± 0.8 Pg/μL & 6 ± 0.5 μg/μL) compared to group treated by Cham. + CUR (102 ± 0.8 Pg/μL & 7 ± 0.5 μg/μL) respectively and free capsules (with no any drug inside) (148 ± 0.6 Pg/μL & 10 ± 0.6 μg/μL) respectively. Histopathology profile was improved completely. Additionally, encapsulating silymarin showed anti-viral activity in vitro COVID-19 experiment. It can be summarized that muco-inhalable delivery system (MIDS) loaded by silymarin can be used to overcome inflammation induced by oleic acid and to overcome COVID-19.

Preparation and applications of chitosan and cellulose composite materials

Chitosan is a natural fiber, chemically cellulose-like biopolymer, which is processed from chitin. Its use as a natural polymer is getting more attention because it is non-toxic, renewable, and biocompatible. However, its poor mechanical and thermal strength, particle size, and surface area restrict its industrial use. Consequently, to improve these properties, cellulose and/or inorganic nanoparticles have been used. This review discusses the recent progress of chitosan and cellulose composite materials, their preparation, and their applications in different industrial sectors. It also discusses the modification of chitosan and cellulose composite materials to allow their use on a large scale. Finally, the recent development of chitosan composite materials for drug delivery, food packaging, protective coatings, and wastewater treatment are discussed. The challenges and perspectives for future research are also considered. This review suggests that chitosan and cellulose nano-composite are promising, low-cost products for environmental remediation involving a simple production process.

Preparation and Characterization of an Injectable and Photo-Responsive Chitosan Methacrylate/Graphene Oxide Hydrogel: Potential Applications in Bone Tissue Adhesion and Repair

As life expectancy continues to increase, the inevitable weakening and rupture of bone tissue have grown as concerns in the medical community, thus leading to the need for adhesive materials suitable for bone repair applications. However, current commercially available adhesives face certain drawbacks that prevent proper tissue repair, such as low biocompatibility, poor adhesion to wet surfaces, and the need for high polymerization temperatures. This work aims to develop an injectable and photo-responsive chitosan methacrylate/graphene oxide (ChiMA/GO) adhesive nanocomposite hydrogel of high biocompatibility that is easy to apply by simple extrusion and that offers the possibility for in situ polymer and physiological temperatures. The nanocomposite was thoroughly characterized spectroscopically, microscopically, rheologically, thermally, and through mechanical, textural, and biological assays to fully evaluate its correct synthesis and functionalization and its performance under physiological conditions that mimic those observed in vivo. In addition, a finite element analysis (FEA) simulation was used to evaluate its performance in femur fractures. Results suggest the material’s potential as a bioadhesive, as it can polymerize at room temperature, shows superior stability in physiological media, and is capable of withstanding loads from body weight and movement. Moreover, the material showed remarkable biocompatibility as evidenced by low hemolytic and intermediate platelet aggregation tendencies, and high cytocompatibility when in contact with osteoblasts. The comprehensive studies presented here strongly suggest that the developed hydrogels are promising alternatives to conventional bone adhesives that might be further tested in vivo in the near future.

Bigels as drug delivery systems: From their components to their applications

Bigels are systems that usually result from mixing a hydrogel and an organogel: the aqueous phase is commonly formed by a hydrophilic biopolymer, whereas the organic phase comprises a gelled vegetable oil because of the presence of an organogelator. The proportion of the corresponding gelling agent in each phase, the organogel/hydrogel ratio, and the mixing temperature and speed all need to be taken into consideration for bigel manufacturing. Bigels, which are particularly useful drug delivery systems, have already been formulated for transdermal, buccal, and vaginal routes. Mechanical assessments and microscopy are the most reported characterization techniques. As we review here, their composition and unique structure confer promising drug delivery attributes, such as mucoadhesion, the ability to control drug release, and the possibility of including both hydrophilic and lipophilic drugs in the same system.

Synthesis of nanomedicine hydrogel microcapsules by droplet microfluidic process and their pH and temperature dependent release

Chitosan and alginate hydrogels are attractive because they are highly biocompatible and suitable for developing nanomedicine microcapsules. Here we fabricated a polydimethylsiloxane-based droplet microfluidic reactor to synthesize nanomedicine hydrogel microcapsules using Au@CoFeB-Rg3 as a nanomedicine model and a mixture of sodium alginate and PEG-g-chitosan crosslinked by genipin as a hydrogel model. The release kinetics of nanomedicines from the hydrogel were evaluated by simulating the pH and temperature of the digestive tract during drug transport and those of the target pathological cell microenvironment. Their pH and temperature-dependent release kinetics were studied by measuring the mass loss of small pieces of thin films formed by the nanomedicine-encapsulating hydrogels in buffers of pH 1.2, 7.4, and 5.5, which replicate the pH of the stomach, gut and blood, and cancer microenvironment, respectively, at 20 °C and 37 °C, corresponding to the storage temperature of hydrogels before use and normal body temperature. Interestingly, nanomedicine-encapsulating hydrogels can undergo rapid decomposition at pH 5.5 and are relatively stable at pH 7.4 at 37 °C, which are desirable qualities for drug delivery, controlled release, and residue elimination after achieving target effects. These results indicate that the designed nanomedicine hydrogel microcapsule system is suitable for oral administration.

Chitosan-centered nanosystems as sustained therapeutics for allergic rhinitis intervention: Inhibition of histamine-induced cascades

Allergic rhinitis (AR), histamine-mediated upper airway inflammatory disorder, is characterized by sneezing, itching, airway hyperreactivity, etc. Though it is clinically well-managed by non-invasive inhaled antihistamines, for example, ketotifen (KT, histamine release inhibitor) and cetirizine (CTZ, histamine receptor antagonist), inherent defects of short mucosal in situ retention, frequent administration resulting in irritation to mucosa, and lack of target-specific sequential release of dual drug systems which have been proven to be more effective are inevitable, urging for alternative therapeutic strategies. Recent advances in nanotechnology may be pivotal to generating muco-adhesive nanosystems, which is desirable to prolong local retention, reduce dosing frequency and relieve mucosal irritation. In this regard, KT incorporated and CTZ decorated hydroxybutyl chitosan nanoparticles (K ⊂ CH NPs) were fabricated as nasal adaptive sequential release dual drug system for long-term AR therapy. Nasal adaptive morphology transformation and two-step payload release up to 72 h were achieved in vitro, with ~ 3-fold higher bio-adhesivity over free drugs appeared. K ⊂ CH NPs accomplished longer histamine release inhibition (~ 24 h) and histamine H₁ receptor antagonism (~ 6 h), compared with free KT&CTZ of ~ 12 h and ~ 2 h, respectively. The nanosystems provided comparable anti-allergic effect to free antihistamines via successive intranasal dropping in AR rat, while encouragingly, significantly (P < 0.05) better therapeutic efficacy at reduced treatment frequency (every 4 days) and dose (half-dose). Therefore, the outcomes establish K ⊂ CH NPs as effective low-dose and long-interval administered nanosystems to ameliorate histamine-mediated AR inflammation, which could in principal find extensive utilizations in respiratory allergy intervention.

Optimally designed theranostic system based folic acids and chitosan as a promising mucoadhesive delivery system for encapsulating curcumin LbL nano-template against invasiveness of breast cancer

Curcumin is a potential candidate in cancer therapy due to its ability to inhibit many signalling pathways at the same time of exposure because of its unique content of aromatic ring, B diketone, olefinic linker, and O methoxy phenolic groups. Its applications in biomedical therapy is limited because of its sensitivity, and its rapid degradation. In the current study, curcumin inserted into polyelectrolyte pairs (protamine and dextran) and then was functionalized by folic acid conjugated chitosan used for the first time, as theranostic system. Such this strategy allows to improve its mucoadhesion and penetration that increases their accumulation inside cancer cells. CUR-LbL NPs were then used to investigate drug release inside Human Mammary Carcinoma (MCF-7 cell lines) after their incubations for 3 h, 6 h and 24 h. Flow cytometry indicated that the percentages of apoptosis, necrosis and cell cycle arrest were increased significantly in MCF-7 cell lines treated by CUR-LbL NPs. Furthermore, SEM image showed many debris in the section of MCF-7 treated by CUR-LbL NPs. Here, it can be summarized that curcumin functionalized by multi-layered polyelectrolyte capsules can be used as a model to study the fate of the adsorbed nanocarriers and to investigate the drug release inside cells.

Antimicrobial Nano-Agents: The Copper Age

The constant advent of major health threats such as antibacterial resistance or highly communicable viruses, together with a declining antimicrobial discovery, urgently requires the exploration of innovative therapeutic approaches. Nowadays, strategies based on metal nanoparticle technology have demonstrated interesting outcomes due to their intrinsic features. In this scenario, there is an emerging and growing interest in copper-based nanoparticles (CuNPs). Indeed, in their pure metallic form, as oxides, or in combination with sulfur, CuNPs have peculiar behaviors that result in effective antimicrobial activity associated with the stimulation of essential body functions. Here, we present a critical review on the state of the art regarding the in vitro and in vivo evaluations of the antimicrobial activity of CuNPs together with absorption, distribution, metabolism, excretion, and toxicity (ADMET) assessments. Considering the potentiality of CuNPs in antimicrobial treatments, within this Review we encounter the need to summarize the behaviors of CuNPs and provide the expected perspectives on their contributions to infectious and communicable disease management.

Starch based hydrogel NPs loaded by anthocyanins might treat glycogen storage at cardiomyopathy in animal fibrotic model

Many reports have been published recently confirmed the limitation of cargo molecules delivered into the heart. This failure is mostly associated with lymphatic or vascular channels washing or to the immune system recognition. Delivery of anthocyanins by encapsulation may augment it retention in the heart at early time points as the capsules are too large to wash out by lymphatic or venous channels and the physical structure of the capsule may shield the anthocyanins from immunoglobulins and cellular components of the immune system. In the current study, the cardiac dysfunction was induced by using carbon tetrachloride and then animal were treated orally by using anthocyanins incorporated into hydrogel NPs twice time /week for 4 weeks. The results showed anthocyanin loaded hydrogel NPs has ability to re-maintain the glycogen content in the liver and heart tissues of fibrotic group (13 ± 1.4 and 5 ± 0.7 μmol glucose/g tissue). Additionally, MDA and hydroxyproline were significantly reduced. PAS stain showed depletion of glycogen granules from heart tissue. It is concluded that starch based hydrogel loaded by anthocyanins can improve histological cardiac functions after their injury .

Synthesis, characterization, and evaluation of BDDE crosslinked chitosan-TGA hydrogel encapsulated with genistein for vaginal atrophy

Vagina atrophy is a common symptom in women after menopause owing to decreasing estrogen levels. The most conventional treatment for this condition is estrogen cream. The shortcoming is its weak adhesion to the vagina mucus, thus requiring frequent daily application. In this study, BDDE was selected to crosslink and graft chitosan with thioglycolic acid, to form thiolated chitosan (CT) and improve the mucoadhesive properties of chitosan. Genistein was selected as the bioactive molecule that could exhibit estrogen-like properties for long-term treatment of vaginal atrophy. The efficacies of the materials were characterized and evaluated both in vitro and in vivo. Results showed that the mucoadhesive property of CT was approximately two-fold stronger against the constant flow than unmodified chitosan. CT with genistein (CT-G) was administered intravaginally every three days in vivo. It showed that the developed CT-G recover 54 % of the epithelium thickness of an atrophic vagina and ease vaginal atrophy.

Clinical treatment of intra-epithelia cervical neoplasia with photodynamic therapy

OBJECTIVES

This clinical study was developed to primarily evaluate the Complete Cytopathological Response Rate of Cervical Intraepithelial Neoplasms to PDT using chitosan nanocapsules containing Chlorocyan-aluminum phthalocyanine as a photoactive agent. Analyses of the Free Recurrence Interval, toxicity profile (immediate and late), and complications (immediate and late), were secondarily analyzed.

METHODS

This study was previously approved by the National Council of Ethics in Research of Brazil (CONEP), on May 28, 2014, under case number 19182113.4.0000.5009. On the surface of the cervix of each selected patient was applied one mL of the formulated gel, and after 30 min, the light was applied. Reports or the identification of adverse effects and/or complications were observed in follow-up visits, in addition to the collection of cervical oncotic cytology.

RESULTS

Out of the total group, 11 (91.7%) primarily treated patients evolved with negative cervical oncotic cytology as soon as in the first evaluation following treatment, and one did not achieve any therapeutic benefit, even after reapplication. Two patients with initially positive response presented cytological recurrence determined by histopathology. A new round of PDT was developed, and both evolved with cytological remission three weeks later, remaining negative until the last follow-up. No important side effects were observed in all the patients.

CONCLUSIONS

Our trial demonstrates that treatment of CIN 1 and 2 lesions using our PDT formulation is feasible and safe. Large randomized clinical trials are required to establish efficacy.

An overview of gastrointestinal mucus rheology under different pH conditions and introduction to pH-dependent rheological interactions with PLGA and chitosan nanoparticles

This review discusses the physicochemical and mechanical properties of porcine gastrointestinal mucus from a rheological point of view. Considering mucus as a viscoelastic gel that functions as a biological barrier by limiting particles passage, lubricating the gastrointestinal tract, and protecting the stomach from gastric acids. The viscoelastic and protective properties of mucus are mainly produced by its mucin network, which is stabilized through electrostatic, hydrophobic and hydrogen bonding interactions. Otherwise, mucus rheology is determined by its polyanionic nature at physiological pH. At neutral pH, mucus presents a viscous behavior produced by chains crosslinking. While, at acidic pH, mucus exhibits an elastic behavior related with the extended conformation that produces mucus gelation at the stomach. Additionally, rheology studies the degree of adhesion between a polymer-mucus mixture through rheological synergism, and how it varies at different pH conditions. Finally, mucoadhesion phenomenon is exemplified with chitosan (cationic) and poly (lactic-co-glycolic) acid (anionic) polymers.

Nano targeted Therapies Made of Lipids and Polymers have Promising Strategy for the Treatment of Lung Cancer

The introduction of nanoparticles made of polymers, protein, and lipids as drug delivery systems has led to significant progress in modern medicine. Since the application of nanoparticles in medicine involves the use of biodegradable, nanosized materials to deliver a certain amount of chemotherapeutic agents into a tumor site, this leads to the accumulation of these nanoencapsulated agents in the right region. This strategy minimizes the stress and toxicity generated by chemotherapeutic agents on healthy cells. Therefore, encapsulating chemotherapeutic agents have less cytotoxicity than non-encapsulation ones. The purpose of this review is to address how nanoparticles made of polymers and lipids can successfully be delivered into lung cancer tumors. Lung cancer types and their anatomies are first introduced to provide an overview of the general lung cancer structure. Then, the rationale and strategy applied for the use of nanoparticle biotechnology in cancer therapies are discussed, focusing on pulmonary drug delivery systems made from liposomes, lipid nanoparticles, and polymeric nanoparticles. Many nanoparticles fabricated in the shape of liposomes, lipid nanoparticles, and polymeric nanoparticles are summarized in our review, with a focus on the encapsulated chemotherapeutic molecules, ligand-receptor attachments, and their targets. Afterwards, we highlight the nanoparticles that have demonstrated promising results and have been delivered into clinical trials. Recent clinical trials that were done for successful nanoparticles are summarized in our review.

Fluorescence for biological logic gates

Biological logic gates are smart probes able to respond to biological conditions in behaviors similar to computer logic gates, and they pose a promising challenge for modern medicine. Researchers are creating many kinds of smart nanostructures that can respond to various biological parameters such as pH, ion presence, and enzyme activity. Each of these conditions alone might be interesting in a biological sense, but their interactions are what define specific disease conditions. Researchers over the past few decades have developed a plethora of stimuli-responsive nanodevices, from activatable fluorescent probes to DNA origami nanomachines, many explicitly defining logic operations. Whereas many smart configurations have been explored, in this review we focus on logic operations actuated through fluorescent signals. We discuss the applicability of fluorescence as a means of logic gate implementation, and consider the use of both fluorescence intensity as well as fluorescence lifetime.

Chitosan and its Derivatives for Ocular Delivery Formulations: Recent Advances and Developments

Chitosan (CS) is a hemi-synthetic cationic linear polysaccharide produced by the deacetylation of chitin. CS is non-toxic, highly biocompatible, and biodegradable, and it has a low immunogenicity. Additionally, CS has inherent antibacterial properties and a mucoadhesive character and can disrupt epithelial tight junctions, thus acting as a permeability enhancer. As such, CS and its derivatives are well-suited for the challenging field of ocular drug delivery. In the present review article, we will discuss the properties of CS that contribute to its successful application in ocular delivery before reviewing the latest advances in the use of CS for the development of novel ophthalmic delivery systems. Colloidal nanocarriers (nanoparticles, micelles, liposomes) will be presented, followed by CS gels and lenses and ocular inserts. Finally, instances of CS coatings, aiming at conferring mucoadhesiveness to other matrixes, will be presented.

Special Issue: Nanocomposite Hydrogels for Biomedical Applications

A hydrogel consists of a three-dimensional network of polymer chains, with water as a solvent in the system [...]

HPMC- and PLGA-Based Nanoparticles for the Mucoadhesive Delivery of Sitagliptin: Optimization and In Vivo Evaluation in Rats

Mucoadhesive nanoparticles represent a potential drug delivery strategy to enhance the therapeutic efficacy in oral therapy. This study assessed the prospective of developing HPMC- and PLGA-based nanoparticles using a nanospray drier as a mucoadhesive extended release drug delivery system for sitagliptin and evaluated their potential in an animal model. Nanoparticles were prepared using a Buchi^® B-90 nanospray drier. Optimization of particle size was performed using response surface methodology by examining the influence of spray-drying process variables (inlet temperature, feed flow, and polymer concentration) on the particle size. The prepared nanoparticles were characterized for various physicochemical characteristics (yield, drug content, morphology, particle size, thermal, and crystallographic properties) and assessed for drug release, stability, and mucoadhesive efficacy by ex vivo and in vivo studies in rats. A linear model was suggested by the design of the experiments to be the best fit for the generated design and values. The yield was 77 ± 4%, and the drug content was 90.5 ± 3.5%. Prepared nanoparticles showed an average particle size of 448.8 nm, with a narrow particle size distribution, and were wrinkled. Thermal and crystallographic characteristics showed that the drug present in the nanoparticles is in amorphous dispersion. Nanoparticles exhibited a biphasic drug release with an initial rapid release (24.9 ± 2.7% at 30 min) and a prolonged release (98.9 ± 1.8% up to 12 h). The ex vivo mucoadhesive studies confirmed the adherence of nanoparticles in stomach mucosa for a long period. Histopathological assessment showed that the formulation is safe for oral drug delivery. Nanoparticles showed a significantly higher (p < 0.05) amount of sitagliptin retention in the GIT (gastrointestinal tract) as compared to control. The data observed in this study indicate that the prepared mucoadhesive nanoparticles can be an effective alternative delivery system for the oral therapy of sitagliptin.

Uptake and Release of Species from Carbohydrate Containing Organogels and Hydrogels

Hydrogels are used for a variety of technical and medical applications capitalizing on their three-dimensional (3D) cross-linked polymeric structures and ability to act as a reservoir for encapsulated species (potentially encapsulating or releasing them in response to environmental stimuli). In this study, carbohydrate-based organogels were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of a β-D-glucose pentaacetate containing methacrylate monomer (Ac-glu-HEMA) in the presence of a di-vinyl cross-linker; these organogels could be converted to hydrogels by treatment with sodium methoxide (NaOMe). These materials were studied using solid state ¹³C cross-polarization/magic-angle spinning (CP/MAS) NMR, Fourier transform infrared (FTIR) spectroscopy, and field emission scanning electron microscopy (FE-SEM). The swelling of the gels in both organic solvents and water were studied, as was their ability to absorb model bioactive molecules (the cationic dyes methylene blue (MB) and rhodamine B (RhB)) and absorb/release silver nitrate, demonstrating such gels have potential for environmental and biomedical applications.

Review of Stimuli-Responsive Polymers in Drug Delivery and Textile Application

This review describes some commercially available stimuli-responsive polymers of natural and synthetic origin, and their applications in drug delivery and textiles. The polymers of natural origin such as chitosan, cellulose, albumin, and gelatin are found to show both thermo-responsive and pH-responsive properties and these features of the biopolymers impart sensitivity to act differently under different temperatures and pH conditions. The stimuli-responsive characters of these natural polymers have been discussed in the review, and their respective applications in drug delivery and textile especially for textile-based transdermal therapy have been emphasized. Some practically important thermo-responsive polymers such as pluronic F127 (PF127) and poly(N-isopropylacrylamide) (pNIPAAm) of synthetic origin have been discussed in the review and they are of great importance commercially because of their in situ gel formation capacity. Some pH-responsive synthetic polymers have been discussed depending on their surface charge, and their drug delivery and textile applications have been discussed in this review. The selected stimuli-responsive polymers of synthetic origin are commercially available. Above all, the applications of bio-based or synthetic stimuli-responsive polymers in textile-based transdermal therapy are given special regard apart from their general drug delivery applications. A special insight has been given for stimuli-responsive hydrogel drug delivery systems for textile-based transdermal therapy, which is critical for the treatment of skin disease atopic dermatitis.

Chitosan as a Natural Copolymer with Unique Properties for the Development of Hydrogels

Hydrogel-based polymers are represented by those hydrophilic polymers having functional groups in their chain such as amine (NH2), hydroxyl [-OH], amide (-CONH-, -CONH2), and carboxyl [COOH]. These hydrophilic groups raise their potential to absorb fluids or aqueous solution more than their weights. This physicochemical mechanism leads to increased hydrogel expansion and occupation of larger volume, the process which shows in swelling behavior. With these unique properties, their use for biomedical application has been potentially raised owing also to their biodegradability and biocompatibility. Chitosan as a natural copolymer, presents a subject for hydrogel structures and function. This review aimed to study the structure as well as the function of chitosan and its hydrogel properties.