Biosensors for the Detection of Antibiotics in Poultry Industry—A Review

A novel "on-off-on" electrochemiluminescence aptasensor based on resonance energy transfer as signal amplification strategy for ultrasensitive detection of sulfadiazine in different samples

The misuse of antibiotics may contaminate the environment and cause harm to human health. Therefore, rapid and accurate detection of antibiotics is essential. In this study, a novel electrochemiluminescence resonance energy transfer (ECL-RET) pair was designed using a new ECL emitter (CPM, Ce-TBAPy) as the donor and Co-MOF@AuPt as the acceptor. Moreover, a highly sensitive and specific "on-off-on" ECL aptasensor was constructed for detecting sulfadiazine (SDZ). The aptasensor exhibited a broad linear range (from 10.0 fg mL-1 to 100 ng mL-1) for the SDZ concentration, with limit of detection and limit of quantification values of 1.14 fg mL-1and 3.75 fg mL-1, respectively. The aptasensor achieved good results in spiking experiments with milk and egg samples, and successfully quantified SDZ in fish meal quality control sample. The prepared aptasensor presents great potential for food and environmental safety by detecting antibiotics.

Electro-, photo-, and photoelectrochemical degradation of chloramphenicol on self-doping Ti nanotubes

In this work, the photo-, electro-, and photo-electro-oxidation of chloramphenicol was investigated. The photo-experiments were carried out with different irradiation sources (an ultraviolet and a simulated solar source) using self-doped titanium nanotubes (SDTNT), a very promising and innovative material that deserves further investigations in the degradation of different pollutants. The photo-electrooxidation (j = 15 mA cm-2) under simulated solar irradiation presented the best efficiency, with ca. 100% degradation and kinetic constant of k = 0.04427 min-1. The FTIR analysis demonstrated a structural modification of the standard molecule occurred for all conditions used, suggesting a modification in functional groups responsible for the biological activity. Furthermore, the TOC analysis showed a significant mineralization of the pollutant (66% from the initial concentration). In addition, both photo-electrooxidation approaches have demonstrated a positive value of S, where the simulated solar irradiation reached the highest value S = 0.6960. The experimental results pointed out evidence that the methodology employed herein for chloramphenicol degradation is greatly interesting and the photo-electrooxidation under simulated solar irradiation is a promising approach for this purpose.

Use of nanotechnology-based nanomaterial as a substitute for antibiotics in monogastric animals

Nanotechnology has emerged as a promising solution for tackling antibiotic resistance in monogastric animals, providing innovative methods to enhance animal health and well-being. This review explores the novel use of nanotechnology-based nanomaterials as substitutes for antibiotics in monogastric animals. With growing global concerns about antibiotic resistance and the need for sustainable practices in animal husbandry, nanotechnology offers a compelling avenue to address these challenges. The objectives of this review are to find out the potential of nanomaterials in improving animal health while reducing reliance on conventional antibiotics. We examine various forms of nanomaterials and their roles in promoting gut health and also emphasize fresh perspectives brought by integrating nanotechnology into animal healthcare. Additionally, we delve into the mechanisms underlying the antibacterial properties of nanomaterials and their effectiveness in combating microbial resistance. By shedding light on the transformative role of nanotechnology in animal production systems. This review contributes to our understanding of how nanotechnology can provide safer and more sustainable alternatives to antibiotics.

Design and fabrication of a competitive lateral flow assay using gold nanoparticle as capture probe for the rapid and on-site detection of penicillin antibiotic in food samples

Lateral flow assays (LFAs) are among the utmost cost-efficient, paper-based point-of-care (POC) diagnostic devices. Herein, we have reported the fabrication of a competitive LFA for on-site detection of penicillin. Various parameters such as Ab concentration for conjugation, Pen-BSA conjugate concentration, pore size of membrane, and blocking buffer were standardised for the fabrication of LFA. Different concentrations of penicillin (1 pM-1 mM) were added to the sample pad to observe the color intensity. The visual detection limit (LOD) achieved from the LFA was 10 nM for Penicillin that correlated with the LOD calculated from the 'ColorGrab' colorimeter application. Additionally, LFA showed insignificant cross reactivity with other β-lactam antibiotics and were also validated with spiked food samples such as milk, meat and egg. Hence, the fabricated LFA can be successfully utilised for the POC detection of penicillin in food samples on large scale.

Block copolymer-derived recessed nanodisk-array electrodes for electrochemical detection of β-lactam antibiotics

Antimicrobial resistance (AMR) is one of the major socio-economic factors contributing to public health. β-lactams are most commonly prescribed drugs for variety of bacterial infections. Frequent use of antibiotics leads to AMR in humans and animals. The present work is focused on developing an electro-immunosensor to control and regulate the excessive use of antibiotics in animal-based food products. An amphiphilic block co-polymer poly(ethylene oxide-block-methyl methacrylate)(PEO-b-PMMA) was used to fabricate recessed nano-disk array electrode (RNE) and immobilized with Pen-Ab and Cef-Ab antibodies. The Limit of detection (LOD) of RNE working electrode was found to be 14.8 pM for penicillin and 13.8 pM for cefalexin with good selectivity in presence of non-specific antibiotics. Fabricated RNE electrode could detect trace amounts of spiked antigen in real samples of milk, egg and meat extract. Further, mesoporous thin film and microarrays can eventually be used to develop point-of-care diagnosis of antibiotics in animal-based food products.

Microbial Fuel Cells as Effective Tools for Energy Recovery and Antibiotic Detection in Water and Food

This work demonstrates that microbial fuel cells (MFCs), optimized for energy recovery, can be used as an effective tool to detect antibiotics in water-based environments. In MFCs, electroactive biofilms function as biocatalysts by converting the chemical energy of organic matter, which serves as the fuel, into electrical energy. The efficiency of the conversion process can be significantly affected by the presence of contaminants that act as toxicants to the biofilm. The present work demonstrates that MFCs can successfully detect antibiotic residues in water and water-based electrolytes containing complex carbon sources that may be associated with the food industry. Specifically, honey was selected as a model fuel to test the effectiveness of MFCs in detecting antibiotic contamination, and tetracycline was used as a reference antibiotic within this study. The results show that MFCs not only efficiently detect the presence of tetracycline in both acetate and honey-based electrolytes but also recover the same performance after each exposure cycle, proving to be a very robust and reliable technology for both biosensing and energy recovery.

The Establishment of a Tobramycin-Responsive Whole-Cell Micro-Biosensor Based on an Artificial Ribozyme Switch

In this study, a tobramycin concentration-dependent whole-cell micro-biosensor (tob-HHAz) was constructed by fusing a tobramycin aptamer with a hammerhead ribozyme (HHR) from Schistosoma mansoni. The biosensor was obtained by integrating all the modules into one complete RNA sequence, which was easily introduced into E. coli without suffering from harsh external environments. Three independent tobramycin-sensitive RNA structures were identified via high-throughput screening in vivo and were further verified in vitro to undergo the desired self-cleavage reaction. The computation prediction of the RNA structure was performed to help analyze the mechanisms of various conformations by performing a qualitative and rapid detection of tobramycin in practical samples; two sensors exhibited high responsiveness to spiked milk, with a detection limit of around 40 nM, which is below the EU's antibiotic maximum residual level. One of the structures provides a linear range from 30 to 650 nM with a minimum detection limit of 30 nM and showed relatively good selectivity in spiked urine. This study is the first in which in vivo screening was combined with computation analysis to optimize the pivotal structure of sensors. This strategy enables researchers to use artificial ribozyme-based biosensors not only for antibiotic detection but also as a generally applicable method for the further detection of substances in living cells.

Nanomaterial-based fluorescent biosensors for the detection of antibiotics in foodstuffs: A review

Antibiotics are widely used as bacteriostatic or bactericidal agents against various microbial infections in humans and animals. The excessive use of antibiotics has led to an accumulation of their residues in food products, which ultimately poses a threat to human health. In light of the shortcomings of conventional methods for antibiotic detection (primarily cost, proficiency, and time-consuming procedures), the development of robust, accurate, on-site, and sensitive technologies for antibiotic detection in foodstuffs is important. Nanomaterials with amazing optical properties are promising materials for developing the next generation of fluorescent sensors. In this article, advances in detecting antibiotics in food products are discussed with respect to their sensing applications, with a focus on fluorescent nanomaterials such as metallic nanoparticles, upconversion nanoparticles, quantum dots, carbon-based nanomaterials, and metal-organic frameworks. Furthermore, their performance is evaluated to promote the continuation of technical advances.

Recombinant antibodies by phage display for bioanalytical applications

Antibody phage display, aimed at preparing antibodies to defined antigens, is a useful replacement for hybridoma technology. The phage system replaces all work stages that follow animal immunization with simple procedures for manipulating DNA and bacteria. It enables the time needed to generate stable antibody-producing clones to be shortened considerably, making the process noticeably cheaper. Antibodies prepared by phage display undergo several affinity selection steps and can be used as selective receptors in biosensors. This article briefly describes the techniques used in the making of phage antibodies to various antigens. The possibilities and prospects are discussed of using phage antibodies as selective agents in analytical systems, including biosensors.

Ultrasensitive immunosensing of Penicillin G in food samples using reduced graphene oxide (rGO) decorated electrode surface

The impact of uncontrolled antibiotic use in animals has subsequently led to emergence of antibiotic-resistant bacteria among humans due to consumption of animal by-products. Hence, to investigate antibiotic contamination in animal origin food products, we have developed a reduced graphene oxide (rGO) based immunosensor using fabricated electrode conjugated with anti-Penicillin antibody (rGO/Pen-Ab) for sensitive detection of Penicillin G. To execute this, Penicillin was first conjugated with Bovine Serum Albumin (BSA) which was confirmed via chromatographic, spectroscopic and electrophoretic-based techniques against both the in-house developed Penicillin conjugate (Pen-BSA) as well as the commercial Penicillin conjugate (Com-Pen-BSA). Further, we fabricated electrode based on one step synthesized rGO and immobilized with antibodies generated against Pen-BSA (Pen-Ab), and Com-Pen-BSA (Com-Pen-Ab), separately for detection of Penicillin. Each synthesis and conjugation step was confirmed by different spectroscopic methods. For efficient working of the electrode, various parameters were optimized using Voltammetry. The limit of detection for Penicillin G against Pen-Ab and Com-Pen-Ab was determined as 0.724 pM and 0.668 pM respectively and both displayed negligible cross reactivity against other β-lactam antibiotics (Cefalexin and Ampicillin). Furthermore, antibiotics were also detected in spiked milk, egg and meat samples and the electrode was evaluated for repeatability and storage stability. In conclusion, in-house developed Pen-Ab showed better sensitivity as compared to Com-Pen-Ab. The fabricated rGO/Pen-Ab biosensor shows future potential for rapid detection of penicillin and other β-lactam antibiotics for safe consumption of animal by-products in humans.

A review on nanomaterial-based electrodes for the electrochemical detection of chloramphenicol and furazolidone antibiotics

To grow food for people, antibiotics were used, and these antibiotics can accumulate in the human body through food metabolism, which may have remarkably harmful effects on human health and safety. Therefore, low-cost sensors are needed for the detection of antibiotic residues in food samples. Recently, nanomaterial-based electrochemical sensors such as carbon nanoparticles, graphene nanoparticles, metal oxide nanoparticles, metal nanoparticles, and metal-organic nanostructures have been successfully used as sensing materials for the detection of chloramphenicol (CP) and furazolidone (FZ) antibiotics. However, additional efforts are still needed to fabricate effective multi-functional nanomaterial-based electrodes for the preparation of portable electrochemical sensor devices. The current review focuses on a quick introduction to CP and FZ antibiotics, followed by an outline of the current electrochemical analytical methods. In addition, we have discussed in-depth different nanoparticle supports for the electrochemical detection of CP and FZ in different matrices such as food, environmental, and biological samples. Finally, a summary of the current problems and future perspectives in this area are also highlighted.

Antibiotics and antibiotic-resistant bacteria in greywater: Challenges of the current treatment situation and predictions of future scenario

The current work reviews the quantitative microbiological risk assessment of antibiotic-resistant bacteria (ARB) in greywater and discusses the international strategies currently used for reducing antimicrobial resistance. The work highlights the countries that have a plan for the treatment and reuse of greywater and the current guidelines used in these countries. The paper also investigates the role of greywater in the distribution of antimicrobial resistance because of antibiotics and ARB. A bibliometric analysis was conducted for the studies on greywater, pathogenic bacteria, and antibiotics. The studies obtained from Scopus database were screened and compared to obtain the data for global antimicrobial resistance in 2000 and 2021. The strategies used by developed countries that led to the reduction in the recorded antimicrobial resistance are also listed. The challenges and limitations associated with the current plans adopted by several countries to minimise the spreading of the antimicrobial resistance are highlighted, while proposed solutions are provided. Two main issues associated with the distribution of antimicrobial resistance are (1) the absence of a plan in developing counties and presence of antimicrobial agents and ARB in the environment and (2) the difficulties in the current treatment technologies used for the removal of these antimicrobial agents from the water and wastewater. Based on the review and discussion, it was concluded that more advanced technologies are required to ensure total elimination of the antimicrobial agents and ARB from the environment. In addition, a new international standard should be drafted for the ARB in the environment, as they differ from the one currently used for medical applications.

Improving the Sensitivity of Nanofibrous Membrane-Based ELISA for On-Site Antibiotics Detection

An ultrasensitive and portable colorimetric enzyme-linked immunosorbent assay (ELISA) sensor for antibiotics was fabricated by immobilizing antibodies inside the largely porous and highly hydrophilic nanofibrous membranes. Different from regular electrospun nanofibrous membranes where antibodies may frequently be blocked by the heterogeneous porous structure and sterically crowded loaded on the surface, the controlled microporous structure and increased hydrophilicity of nanofibrous membranes could improve the diffusion properties of antibodies, reduce the sterically crowding effect, and dramatically improve the sensitivity of the membrane-based ELISA. The limitation of detection (LOD) for chloramphenicol (CAP) reached 0.005 ng/mL, around 200 times lower than the conventional paper-based ELISA, making quantitative analysis and portable on-site detection achievable via the use of smartphones. The successful design and fabrication of the nanofibrous membrane-based ELISA with novel features overcome the structural drawbacks of regular electrospun nanofibrous membranes and provide new paths to develop highly sensitive on-site detection of hazardous chemical agents.

A recent advancement on nanomaterials for electrochemical sensing of sulfamethaoxole and its futuristic approach

Sulfamethoxazole (SMX) forms the high harmfulness and causing negative health impacts to well-being human and environment that found to be major drastic concern. It is subsequently important to keep in track for monitoring of SMX through convenient detecting devices which include the requirement of being minimal expense and potential for on location environmental applications. Nanomaterials based design has been proposed to determine the SMX antibiotic which in turn provides the solution for this issue. In spite of the critical advancement accomplished in research, further endeavors are yet to foster the progress on electrochemical sensors with the guide of various functional nanomaterials and guarantee the effective transportability for such sensors with improved coherence. Moreover, it has been noticed that, only few reports on electrochemical sensing of SMX detection using nanomaterials was observed. Hence an in-depth evaluation of electrochemical sensing systems using various nanomaterials for SMX detection was summarized in this review. Additionally this current review centers with brief presentation around SMX hazard evaluation followed by study on the current logical techniques to feature the importance for SMX detection. This review will provide the sum up view towards the future ideas of this field which assists in improving the detecting strategies for SMX detection.

Quantum dots based sensitive nanosensors for detection of antibiotics in natural products: A review

Residual antibiotics in food products originated from administration of the antibiotics to animals may be accumulated through food metabolism in the human body and endanger safety and health. Thus, developing a prompt and accurate way for detection of antibiotics is a crucial issue. The zero-dimensional fluorescent probes including metals based, carbon and graphene quantum dots (QDs), are highly sensitive materials to use for the detection of a wide range of antibiotics in natural products. These QDs demonstrate unique optical properties like tunable photoluminescence (PL) and excitation-wavelength dependent emission. This study investigates the trends related to carbon and metal based QDs preparation and modification, and their diverse detection application. We discuss the performance of QDs based sensors application in various detection systems such as photoluminescence, photoelectrochemical, chemiluminescence, electrochemiluminescence, colorimetric, as well as describing their working principles in several samples. The detecting mechanism of a QDs-based sensor is dependent on its properties and specific interactions with particular antibiotics. This review also tries to describe environmental application and future perspective of QDs for antibiotics detection.

Microbial acoustic sensor test-system based on a piezoelectric resonator with a lateral electric field for kanamycin detection in liquid

A microbial test-system for real-time determination of low/residual concentrations of kanamycin in a liquid without the need for special labels is presented. The main element of the system was a piezoelectric resonator excited by a lateral electric field based on an X-cut lithium niobate plate 0.5 mm thick with two rectangular electrodes on one side. On the other side of the resonator, there was a 1.5 ml liquid container. As a sensory element we used Escherichia coli B-878 microbial cells, which are sensitive to kanamycin. For measurement 1 ml of this cells suspension was placed in a liquid container and then the test liquid in the amount of 2 μl containing kanamycin was added. The change in the real part of the electrical impedance of the resonator before and after the test liquid addition was used as an analytical signal which indicated the presence of kanamycin. The lower limit of determination of kanamycin turned out to be 1.0 μg/ml with an analysis time of 10 min. The test-system allows to detect kanamycin in the presence of such antibiotic as ampicillin and polymixin.

Applications of Smart Technology as a Sustainable Strategy in Modern Swine Farming

The size of the pork market is increasing globally to meet the demand for animal protein, resulting in greater farm size for swine and creating a great challenge to swine farmers and industry owners in monitoring the farm activities and the health and behavior of the herd of swine. In addition, the growth of swine production is resulting in a changing climate pattern along with the environment, animal welfare, and human health issues, such as antimicrobial resistance, zoonosis, etc. The profit of swine farms depends on the optimum growth and good health of swine, while modern farming practices can ensure healthy swine production. To solve these issues, a future strategy should be considered with information and communication technology (ICT)-based smart swine farming, considering auto-identification, remote monitoring, feeding behavior, animal rights/welfare, zoonotic diseases, nutrition and food quality, labor management, farm operations, etc., with a view to improving meat production from the swine industry. Presently, swine farming is not only focused on the development of infrastructure but is also occupied with the application of technological knowledge for designing feeding programs, monitoring health and welfare, and the reproduction of the herd. ICT-based smart technologies, including smart ear tags, smart sensors, the Internet of Things (IoT), deep learning, big data, and robotics systems, can take part directly in the operation of farm activities, and have been proven to be effective tools for collecting, processing, and analyzing data from farms. In this review, which considers the beneficial role of smart technologies in swine farming, we suggest that smart technologies should be applied in the swine industry. Thus, the future swine industry should be automated, considering sustainability and productivity.

Ultrasensitive fluorescence detection of norfloxacin in aqueous medium employing a 2D Zn(ii)-based coordination polymer

A 2D fluorescent coordination polymer, {[Zn(L)0.5(mip)] 1.75H2O}n (1), was successfully assembled. 1 was developed as an ultrasensitive fluorescent probe for the sensing of norfloxacin (NOR) in water.

Adsorption and detoxification of pharmaceutical compounds from wastewater using nanomaterials: A review on mechanism, kinetics, valorization and circular economy

Antibiotics overuse, inappropriate conduct, and discharge have led to adverse effects on various ecosystems. The occurrence of antibiotics in surface and drinking water is a matter of global concern. It is responsible for multiple disorders, including disruption of endocrine hormones and high chronic toxicity. The hospitals, pharmaceutical industries, households, cattle farms, and aquaculture are the primary discharging sources of antibiotics into the environment. This review provides complete detail on applying different nanomaterials or nanoparticles for the efficient removal of antibiotics from the diverse ecosystem with a broader perspective. Efforts have been made to focus on the degradation pathways and mechanism of antibiotic degradation using nanomaterials. More light has been shed on applying nanostructures in photocatalysis, which would be an economical and efficient solution. The nanoscale material or nanoparticles have incredible potential for mineralizing pharmaceutical compounds in aqueous solutions at low cost, easy handling characteristics, and high efficacy. Furthermore, nanoparticles can absorb the pharmaceutical by-products and wastes at a minimum cost as they can be easily recycled. With the increasing number of research in this direction, the valorization of pharmaceutical wastes and by-products will continue to expand as we progress from old conventional approaches towards nanotechnology. The utilization of nanomaterials in pharmaceutical wastewater remediation is discussed with a major focus on valorization, energy generation, and minimization and its role in the circular economy creating sustainable development.

Environmental fate of tetracycline antibiotics: degradation pathway mechanisms, challenges, and perspectives

Tetracycline pollution is a growing global threat to aquatic and terrestrial biodiversity due to its unprecedented use in aquaculture, livestock, and human disease prevention. The influx of tetracycline may annihilate the microbial ecology structure in the environment and pose a severe threat to humans by disturbing the food chain. Although significant research data are available in the literature on various aspects of tetracycline, including detection techniques, degradation mechanisms, degradation products, and policy statements to curtail the issue, there is a scarcity of a report to compile the recent data in the literature for better analysis and comparison by the policymakers. To achieve this paucity in knowledge, the current study aims at collecting data on the available degradation strategies, mechanisms involved in biodegradable and non-biodegradable routes, the main factor affecting degradation strategies, compile novel detection techniques of tetracycline antibiotics in the environment, discuss antibiotic resistance genes and their potential role in degradation. Finally, limitations in the current bioremediation techniques and the future prospects are discussed with pointers for the decision-makers for a safer environment.

Optimizing antimicrobial use: challenges, advances and opportunities

An optimal antimicrobial dose provides enough drug to achieve a clinical response while minimizing toxicity and development of drug resistance. There can be considerable variability in pharmacokinetics, for example, owing to comorbidities or other medications, which affects antimicrobial pharmacodynamics and, thus, treatment success. Although current approaches to antimicrobial dose optimization address fixed variability, better methods to monitor and rapidly adjust antimicrobial dosing are required to understand and react to residual variability that occurs within and between individuals. We review current challenges to the wider implementation of antimicrobial dose optimization and highlight novel solutions, including biosensor-based, real-time therapeutic drug monitoring and computer-controlled, closed-loop control systems. Precision antimicrobial dosing promises to improve patient outcome and is important for antimicrobial stewardship and the prevention of antimicrobial resistance.

Technological Advancements for the Detection of Antibiotics in Food Products

Antibiotics, nowadays, are not only used for the treatment of human diseases but also used in animal and poultry farming to increase production. Overuse of antibiotics leads to their circulation in the food chain due to unmanaged discharge. These circulating antibiotics and their residues are a major cause of antimicrobial resistance (AMR), so comprehensive and multifaceted measures aligning with the One Health approach are crucial to curb the emergence and dissemination of antibiotic resistance through the food chain. Different chromatographic techniques and capillary electrophoresis (CE) are being widely used for the separation and detection of antibiotics and their residues from food samples. However, the matrix present in food samples interferes with the proper detection of the antibiotics, which are present in trace concentrations. This review is focused on the scientific literature published in the last decade devoted to the detection of antibiotics in food products. Various extraction methods are employed for the enrichment of antibiotics from a wide variety of food samples; however, solid-phase extraction (SPE) techniques are often used for the extraction of antibiotics from food products and biological samples. In addition, this review has scrutinized how changing instrumental composition, organization, and working parameters in the chromatography and CE can greatly impact the identification and quantification of antibiotic residues. This review also summarized recent advancements in other detection methods such as immunological assays, surface-enhanced Raman spectroscopy (SERS)-based assays, and biosensors which have emerged as rapid, sensitive, and selective tools for accurate detection and quantification of traces of antibiotics.

A new strategy for the development of efficient impedimetric tobramycin aptasensors with metallo-covalent organic frameworks (MCOFs)

Two bimetallic CoNi-based metallo-covalent organic frameworks (MCOFs) were prepared and explored as the sensitive platforms of impedimetric aptasensors for efficient detection of tobramycin (TOB). The two CoNi-MCOFs were constructed using metallophthalocyanine tetra-amine (MPc-TA, M = Co²⁺ or Ni²⁺) and 4,4'-(1,10-phen-anthroline-2,9-diyl) dibenzaldehyde (PTD) as building units and further coordinating to the secondary metal ions (Ni²⁺ or Co²⁺) by phenanthroline. Interestingly, the immobilization ability of CoPc-TA-PTD(Ni) to TOB-targeted aptamer is higher than that of NiPc-TA-PTD(Co) due to its stronger binding interactions to aptamer. As a result, the CoPc-TA-PTD(Ni)-based aptasensor shows the superior TOB detection ability, giving a low detection limit of 0.07 fg mL^-1 and satisfied sensing performances, such as high selectivity, good reproducibility, and excellent stability. Also, the aptasensor shows the acceptable applicability for detecting TOB in milk or chicken egg. This MCOFs-based sensing strategy could be extensively applied to detect other analytes by anchoring the corresponding probes.

Measurement of Low Concentration of Micro-Plastics by Detection of Bioaffinity-Induced Particle Retention Using Surface Plasmon Resonance Biosensors

The issue of micro-plastics is becoming more and more important due to their ubiquity and the harm they cause to the human body. Therefore, evaluating the biological–physical interaction of micro-plastics with health cells has become the focus of many research efforts. This study focuses on the movement mode and low concentration detection development for micro-plastics in surface plasmon resonance (SPR). Firstly, 20-micrometer micro-plastics were prepared by grinding and filtering, and the movement mode was explored; then, the characteristics were investigated by SPR. Chromatographic analysis showed that the surface charge of micro-plastics dominated the elution time, and estrogen receptors (ERs) played a supporting role. A difference of micro-plastics in SPR sensorgram was observed, inferring the micro-plastics’ movement in rolling mode on the ERs. Characteristics analysis indicated that the low particle number of micro-plastics on SPR showed a linear relationship with the response unit (RU). When ERs were immobilized on the biosensor, the force of the binding of micro-plastics to ERs under an ultra-low background was equivalent to the dissociation rate constant shown as follows: PS (0.05 nM) > PVC (0.09 nM) > PE (0.14 nM). The ELISA-like magnetic beads experiment verified the specificity between ERs and micro-plastics. Therefore, by using the SPR technique, a biological-derived over-occupation of PS was found via higher binding force with ERs and longer retention time. In the future, there will be considerable potential for micro-plastics issues, such as identification in natural samples, biomarking, real-time detection in specific environments/regions and human health subject.

Bacteria-based electro-optical platform for ampicillin detection in aquatic solutions

We have shown for the first time that it is possible to use a bacteria-based sensory system consisting of the bacterium Pseudomonas putida TSh-18 and an electro-optical sensor to detect ampicillin in the concentration range 0.5-600 μg/mL. Changes in the anisotropy of cell polarizability were detected at 900 and 2100 kHz; these represented the state of the cytoplasm and of the cell membrane, respectively. The changes indicate the quickest cell response to changes in the characteristics of the bacterial culture exposed to ampicillin. We have also shown that it is possible to monitor the ampicillin in the presence of kanamycin. In control experiments, we examined the effects of ampicillin and kanamycin on bacterial cells by phase-contrast microscopy and by standard microbiological tests on solid media. P. putida TSh-18 is recommended as a sensor system for ampicillin detection. Electro-optical analysis ensures detection of ampicillin in aquatic solutions in real-time, takes 10 min, and offers a lower limit of ampicillin detection of 0.5 μg/mL, which is lower than the European Community's maximum residue limit standards for penicillin antibiotics.

Advances in Gold Nanoparticles-Based Colorimetric Aptasensors for the Detection of Antibiotics: An Overview of the Past Decade

Misuse of antibiotics has recently been considered a global issue because of its harmful effects on human health. Since conventional methods have numerous limitations, it is necessary to develop fast, simple, sensitive, and reproducible methods for the detection of antibiotics. Among numerous recently developed methods, aptasensors are fascinating because of their good specificity, sensitivity and selectivity. These kinds of biosensors combining aptamer with colorimetric applications of gold nanoparticles to recognize small molecules are becoming more popular owing to their advantageous features, for example, low cost, ease of use, on-site analysis ability using naked eye and no prerequisite for modern equipment. In this review, we have highlighted the recent advances and working principle of gold nanoparticles based colorimetric aptasensors as promising methods for antibiotics detection in different food and environmental samples (2011–2020). Furthermore, possible advantages and disadvantages have also been summarized for these methods. Finally, the recent challenges, outlook, and promising future perspectives for developing novel aptasensors are also considered.

Determination of residues of pesticides, anabolic steroids, antibiotics, and antibacterial compounds in meat products in Oman by liquid chromatography/mass spectrometry and enzyme-linked immunosorbent assay

BACKGROUND AND AIM

Meat is a rich source of many nutrients and plays a vital role in human life however, meat safety is one of the top priorities of great concern for consumers today. More than 90% of human exposure to harmful materials is due to consumption of contaminated meat products. This study was designed to compare four valid analytical methods for the determination of organochlorine pesticides 2,4 D (2,4-dichlorophenoxyacetic acid), dichlorodiphenyldichloroethylene/dichlorodiphenyltrichloroethane, alachlor, organophosphate, anabolic steroids (progesterone, testosterone, and estrogen), antibiotics (tetracycline, sulfonamides, gentamycin, and cephalexin), antibacterial compounds (Macrolide, ß-Lactam, Chloramphenicol, Sulphur drugs, and Gentamicin) residues in 135 beef, buffalo, and sheep meat samples (fresh, frozen meats, minced, and sausage samples) of local, regional, and international brands available in Omani markets.

MATERIALS AND METHODS

Triplicate meat samples from each brand within each species were extracted with acetonitrile and purified with acetonitrile-saturated n-hexane to remove all impurities. To dry the sample after heating, the residue was passed across a Sep-Pak C18 cartridge for sample cleaning before gas chromatography (GC) (Brand GCMS-QP2010 Plus) coupled with different detectors, including a mass spectrometer or GC-electron capture detector (GC-ECD). Liquid chromatography/mass spectrometry (LC-MS) was also employed for the quantification of the residues in meat products. Enzyme-linked immunosorbent assay (ELISA) kits were employed to assess veterinary drug residues, anabolic steroids, and pesticides. The CHARM II instrument was employed to detect chloramphenicol, gentamicin, sulfa-drug, ß-lactam, and macrolide residues in meat and meat product samples.

RESULTS

A thin-layer chromatographic (TLC) method should be considered as another method of choice to determine concentrations of veterinary drugs and anabolic steroids. The TLC results were validated by LC-MS. The three described methods permit the multi-residue analysis of anabolic steroid residue levels of 0.06-1.89 ppb in meat product samples. There were three violative residues of anabolic steroids in red meat products that were above the maximum residue limits (MRLs). Although, the levels of organochlorine pesticides and antibiotic concentrations in meat products were below the MRLs, the long-term consumption is considered a health hazard and will affect the wellbeing of consumers.

CONCLUSION

The four techniques (GC, high-performance liquid chromatography, ELISA and CHARM II) provided results that were reliable and precise for the detection of chessssmical residues in meat and meat products.

A Review of Graphene-Based Surface Plasmon Resonance and Surface-Enhanced Raman Scattering Biosensors: Current Status and Future Prospects

The surface plasmon resonance (SPR) biosensor has become a powerful analytical tool for investigating biomolecular interactions. There are several methods to excite surface plasmon, such as coupling with prisms, fiber optics, grating, nanoparticles, etc. The challenge in developing this type of biosensor is to increase its sensitivity. In relation to this, graphene is one of the materials that is widely studied because of its unique properties. In several studies, this material has been proven theoretically and experimentally to increase the sensitivity of SPR. This paper discusses the current development of a graphene-based SPR biosensor for various excitation methods. The discussion begins with a discussion regarding the properties of graphene in general and its use in biosensors. Simulation and experimental results of several excitation methods are presented. Furthermore, the discussion regarding the SPR biosensor is expanded by providing a review regarding graphene-based Surface-Enhanced Raman Scattering (SERS) biosensor to provide an overview of the development of materials in the biosensor in the future.

Highly sensitive determination of doxorubicin hydrochloride antitumor agent via a carbon nanotube/gold nanoparticle based nanocomposite biosensor

A glassy carbon electrode modified with multi-walled carbon nanotubes (MWCNTs) decorated with gold nanoparticles has been investigated for the first time as an ultrasensitive electrochemical sensor for the determination of doxorubicin hydrochloride (DOX), an efficient antitumor agent. The developed nanocomposite has been characterized by scanning electron microscopy (SEM), besides cyclic and linear sweep voltammetry electrochemical techniques. An efficient catalytic activity for the reduction of DOX has been demonstrated, leading to a significant increase in peak current density and a remarkable decrease in reduction over-potential. Under the optimal condition, a wide linear DOX concentration range from 1×10^-11 to 1×10^-6 M with a very low detection limit of 6.5 pM was achieved with the modified electrode. Meanwhile, the functionalized MWCNTs/gold nanoparticles indicated an appropriate selectivity, reproducibility, and repeatability as well as long-term stability. The promising outcomes of this research approved the applicability of the developed nanocomposite sensor towards trace amounts of DOX in pharmaceutical and clinical preparations.

Biosensors in Evaluation of Quality of Meat and Meat Products – A Review

Biosensors can find application in meat and meat products testing for safety, including microbial and other contaminants, and quality, including meat freshness, beef tenderness and pork quality defects. The available biosensors enable the evaluation of freshness, the classification of tenderness of meat products, the evaluation of the glycolysis extent and the presence of the microbial and other contaminants. Since biosensors depend on receptor types, the expansion of knowledge on metabolic transformations occurring in meat contributes to the development of new potential markers and indicators. Examples include assays for glucose, lactates, hypoxanthines, calpastastins, microbial and other contaminants in meat products, augmenting conventional methods. At the same time, biosensors rely on transducers for detection, requiring achievement in many fields including nanotechnology and optics, among others. Biosensors have potential to become a fundamental tool for monitoring and controlling safety and quality of meat products in the future. Hence the aim of the present paper is to present the current state of knowledge on the application of biosensors in meat.

Advances in the Application of Aptamer Biosensors to the Detection of Aminoglycoside Antibiotics

Antibiotic abuse is becoming increasingly serious and the potential for harm to human health and the environment has aroused widespread social concern. Aminoglycoside antibiotics (AGs) are broad-spectrum antibiotics that have been widely used in clinical and animal medicine. Consequently, their residues are commonly found in animal-derived food items and the environment. A simple, rapid, and sensitive detection method for on-site screening and detection of AGs is urgently required. In recent years, with the development of molecular detection technology, nucleic acid aptamers have been successfully used as recognition molecules for the identification and detection of AGs in food and the environment. These aptamers have high affinities, selectivities, and specificities, are inexpensive, and can be produced with small batch-to-batch differences. This paper reviews the applications of aptamers for AG detection in colorimetric, fluorescent, chemiluminescent, surface plasmon resonance, and electrochemical sensors for the analysis in food and environmental samples. This study provides useful references for future research.

Recent Biosensors for Detection of Antibiotics in Animal Derived Food

Antibiotics are extensively employed as bacteriostatic agents for fighting against microbial infection in animals. However, inappropriate doses of antibiotic drugs may result in antibiotic residues in food of animal origin and may cause various side effects on human health. Moreover, the transferor of antibiotic-resistant bacteria to humans through the food chain may induce serious health hazards. Hence, it is vital to develop sensitive and selective methods for rapid screening and regular monitoring of antibiotic residues in animal-derived foods. The conventional different chromatographic and spectroscopic techniques are time-consuming, expensive and require skilled personnel. To overcome such limitations, biosensors have emerged as an innovative approach recently and integrated with nanotechnologies for sensitive, rapid and on-site monitoring of different antibiotic residues in animal origin foods. This mini-review aims to give an overview of the currently available biosensing techniques to detect antibiotic residue in foods.

Design and fabrication of a highly sensitive and naked-eye distinguishable colorimetric biosensor for chloramphenicol detection by using ELISA on nanofibrous membranes

Enzyme-linked immunoassay (ELISA) is highly specific and selective towards target molecules and is convenient for on-site detection. However, in many cases, lack of high sensitivity makes it hard to reveal a significant colorimetric signal for detecting a trace amount of target molecules. Thus, analytical instruments are required for detection, which limits the application of ELISA for on-site detection. In the present study, a highly sensitive and naked-eyed detectable colorimetric biosensor for chloramphenicol (CAP) was prepared by incorporating ELISA onto surfaces of microporous and nanofibrous membranes. The high specific surface areas of the nanofibers significantly increased the number of antibodies covalently linked onto the fiber surfaces and binding capacity of the sensor with antigens present in a sample. With such an integration, the sensitivity of the ELISA sensor was dramatically increased, and a trace number of targets could reveal a naked-eye detectable color. The immunoassay sensor exhibited a significant naked-eye distinguishable color to chloramphenicol (CAP) at 0.3 ng/mL. The successful design and fabrication of the nanofibrous membrane immunoassay sensor provide new paths towards the development of on-site inspection sensors without the assistance from any instrument.

Large-Scale Phenotyping of Livestock Welfare in Commercial Production Systems: A New Frontier in Animal Breeding

Genomic breeding programs have been paramount in improving the rates of genetic progress of productive efficiency traits in livestock. Such improvement has been accompanied by the intensification of production systems, use of a wider range of precision technologies in routine management practices, and high-throughput phenotyping. Simultaneously, a greater public awareness of animal welfare has influenced livestock producers to place more emphasis on welfare relative to production traits. Therefore, management practices and breeding technologies in livestock have been developed in recent years to enhance animal welfare. In particular, genomic selection can be used to improve livestock social behavior, resilience to disease and other stress factors, and ease habituation to production system changes. The main requirements for including novel behavioral and welfare traits in genomic breeding schemes are: (1) to identify traits that represent the biological mechanisms of the industry breeding goals; (2) the availability of individual phenotypic records measured on a large number of animals (ideally with genomic information); (3) the derived traits are heritable, biologically meaningful, repeatable, and (ideally) not highly correlated with other traits already included in the selection indexes; and (4) genomic information is available for a large number of individuals (or genetically close individuals) with phenotypic records. In this review, we (1) describe a potential route for development of novel welfare indicator traits (using ideal phenotypes) for both genetic and genomic selection schemes; (2) summarize key indicator variables of livestock behavior and welfare, including a detailed assessment of thermal stress in livestock; (3) describe the primary statistical and bioinformatic methods available for large-scale data analyses of animal welfare; and (4) identify major advancements, challenges, and opportunities to generate high-throughput and large-scale datasets to enable genetic and genomic selection for improved welfare in livestock. A wide variety of novel welfare indicator traits can be derived from information captured by modern technology such as sensors, automatic feeding systems, milking robots, activity monitors, video cameras, and indirect biomarkers at the cellular and physiological levels. The development of novel traits coupled with genomic selection schemes for improved welfare in livestock can be feasible and optimized based on recently developed (or developing) technologies. Efficient implementation of genetic and genomic selection for improved animal welfare also requires the integration of a multitude of scientific fields such as cell and molecular biology, neuroscience, immunology, stress physiology, computer science, engineering, quantitative genomics, and bioinformatics.

Study of the antibiotic residues in poultry meat in some of the EU countries and selection of the best compositions of lactic acid bacteria and essential oils against Salmonella enterica

In this study, the presence of antibiotics (ANB) residues was evaluated in poultry meat purchased from German and Lithuanian markets. In addition, the antimicrobial activity of 13 lactic acid bacteria (LAB) strains, 2 essential oils (EO) (Thymus vulgaris and Origanum vulgare L.), and their compositions were tested for the purpose of inhibiting antibiotic-resistant Salmonella spp. ANB residues were found in 3 out of the 20 analyzed poultry meat samples: sample no. 8 contained enrofloxacin (0.46 μg/kg), sample no. 14 contained both enrofloxacin and doxycycline (0.05 and 16.8 μg/kg, respectively), and sample no. 18 contained enrofloxacin (2.06 μg/kg). The maximum residue limits (MRLs) for the sum of enrofloxacin and ciprofloxacin and for doxycycline in the poultry muscle are 100 μg/kg. Finally, none of the tested poultry meat samples exceeded the suggested MRLs; however, the issue of ANB residues still requires monitoring of the poultry industry in Germany, Poland, and Lithuania, despite the currently established low ANB concentrations. These findings can be explained by the increased use of alternatives to ANB in the poultry industry. Our results showed that an effective alternative to ANB, which can help to reduce the occurrence of antibiotic-resistant salmonella, is a composition containing 1.0% of thyme EO and the following LAB strains: Lactobacillus plantrum LUHS122, Enteroccocus pseudoavium LUHS242, Lactobacillus casei LUHS210, Lactobacillus paracasei LUHS244, Lactobacillus plantarum LUHS135, Lactobacillus coryniformins LUHS71, and Lactobacillus uvarum LUHS245, which can be recommended for poultry industry as components of feed or for the treatment of surfaces, to control the contamination with Salmonella strains. However, it should be mentioned that most of the tested LAB strains were inhibited by thyme EO at the concentrations of 0.5 and 1.0%, except for LUHS122, LUHS210, and LUHS245. Finally, it can be noted that the agents responsible for the inhibitory effect on Salmonella are not the viable LAB strains but rather their metabolites, and further studies are needed to identify which metabolites are the most important.

On Column Binding a Real-Time Biosensor for β-lactam Antibiotics Quantification

This work aimed to develop accurate, quick, and practical tools for the detection of residues of penicillin G antibiotic in biological and non-biological samples. The assays were developed based on the binding mechanism of β-lactam to penicillin-binding proteins; samples of different concentrations of penicillin G were incubated with in vitro expressed 6X-Histidine-tagged soluble penicillin-binding protein (PBP2x*) of Streptococcus pneumoniae (S. pneumoniae), whereby penicillin G in samples specifically binds to PBP2x*. The fluorescent-labeled β-lactam analogue Bocillin FL was used as a competent substrate, and two different routes estimated the amounts of the penicillin G. The first route was established based on the differences in the concentration of non-bounded Bocillin FL molecules within the reactions while using a real-time polymerase chain reaction (PCR)-based method for fluorescence detection. The second route depended on the amount of the relative intensity of Bocillin FL bounded to Soluble PBP-2x*, being run on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-page), visualized by a ChemiDoc-It^®2 Imager, and quantified based on the fluorescence affinity of the competent substrate. While both of the methods gave a broad range of linearity and high sensitivity, the on column based real-time method is fast, non-time consuming, and highly sensitive. The method identified traces of antibiotic in the range 0.01-0.2 nM in addition to higher accuracy in comparison to the SDS-based detection method, while the sensitivity of the SDS-based method ranged between 0.015 and 2 µM). Thus, the on column based real time assay is a fast novel method, which was developed for the first time based on the binding inhibition of a fluorescence competitor material and it can be adapted to screen traces of penicillin G in any biological and environmental samples.

Electrospun nanofibers: a promising horizon toward the detection and treatment of cancer

Due to the increase in the number of cancer patients, because of environmental parameters, high stress, low immunity, etc., there is an urgent need to develop cost-effective sensors for early targeted detection of cancerous cells with adequate selectivity and efficiency. Early disease diagnosis is important, as it is necessary to start treatments before disease progression. On the other hand, we need new, more efficient cancer treatment approaches with minimized side effects, more biocompatibility, and easy disposal. Nanobiotechnology is a field that can assist in developing new diagnostic and treatment approaches, specifically in fatal cancers. Herein, a study on the different applications of nanofibers in cancer detection as well as its treatment has been done. Here, a very brief survey on the main structure of biosensors and their different categories has been conducted and will precede the discussion of the study to serve as a reference and guide the reader's understanding.