Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

Development of Bi2S3/Cu2S hetrojuction as an effective photocatalysts for the efficient degradation of antibiotic drug and organic dye

Herein, a Bi2S3/Cu2S was successfully synthesized via a simple one-step wet impregnation process. The compositional behavior and electrical and optical properties of photocatalysts were investigated in detail. Photocatalytic technology has shown great promise in wastewater treatment, splitting water to hydrogen, and converting CO2 to fuel. Researchers or scientist are attempting to design sulfate-based heterojunction photocatalytic systems in order to develop novel photocatalysts with excellent performance. Photodegradation of methylene blue (MB) dye and tetracycline (TC) drug under visible light irradiation was used to assess the photocatalytic activity of as-prepared samples. As a result, 2:1% wt of Bi2S3/Cu2S heterostructure composite revealed superior visible light degradation performing of MB dye, and TC drug efficiency as 90.2% and 87.5%, respectively. The prepared hybrid photocatalyst has demonstated a potential for use in the photocatalytic degradation of antibiotic durgs and dyes, indicating a promissing future for its application.

High stability and selectivity of butterfly pea flower extract-NiAl LDH-based catalysts in the tetracycline degradation

Layered double hydroxide (LDH) is an applicable material that can be modified in various ways. Modifications using natural extracts fulfill the principles of "green chemistry." The preparation of butterfly pea flower extract (BPE)-modified NiAl LDH was completed using the calcination and restacking method. The characteristics of the prepared composites were identified through analysis of functional groups, crystal phase, bandgap energy, surface area and surface morphology. Fourier transform-infrared (FT-IR) characterization revealed that the active group of the catalyst is -OH except for NiAl layered double oxide (LDO), which has the metal oxide-like functional groups. X-ray diffraction patterns expressed a typical layered material structure of NiAl LDH dan NiAl LDH-BPE, but not for NiAl LDO and NiAl LDO-BPE. Introducing BPE into NiAl LDH and NiAl LDO effectively decreased the bandgap energy and changed the surface morphology. The prepared catalysts were applied in a batch system with pH 5 to degrade tetracycline (TC). NiAl LDO demonstrated the highest activity as a catalyst in TC degradation, with a 93.61% degradation rate. In contrast, NiAl LDO-BPE demonstrated the highest structural stability in TC degradation and repeated use, with an initial degradation percentage of 82.58% and a fifth regeneration percentage of 71.4%.

Side effects of the addition of an adsorbent for the nitrification performance of a microbiome in the treatment of an antibiotic mixture

This work determined the effect of biochar (BC) as an adsorbent on the nitrifying microbiome in regulating the removal, transformation, fate, toxicity, and potential environmental consequences of an antibiotic mixture containing oxytetracycline (OTC) and sulfamethoxazole (SMX). Despite the beneficial role of BC as reported in the literature, the present study revealed side effects for the nitrifying microbiome and its functioning arising from the presence of BC. Long-term monitoring revealed severe disruption to nitratation via the inhibition of both nitrite oxidizers (e.g., Nitrospira defluvii) and potential comammox species (e.g., Ca. Nitrospira nitrificans). Byproducts (BPs) more toxic than the parent compounds were found to persist at a high relative abundance, particularly in the presence of BC. Quantitative structure-activity relationship modeling determined that the physicochemical properties of the toxic BPs significantly differed from those of OTC and SMX. The results suggested that the BPs tended to mobilize and accumulate on the surface of the solids in the system (i.e., the BC and biofilm), disrupting the nitrifiers growing at the interface. Collectively, this study provides novel insights, demonstrating that the addition of adsorbents to biological systems may not necessarily be beneficial; rather, they may generate side effects for specific bacteria that have important ecosystem functions.

A novel visible-light-driven Z-scheme C3N5/BiVO4 heterostructure with enhanced photocatalytic degradation performance

As a visible-light response semiconductor materials, bismuth vanadate (BiVO4) is extensively applied in photodegradation organic dye field. In this study, we synthesized C3N5 nanosheets and coupled with decahedral BiVO4 to construct a Z-scheme C3N5/BiVO4 heterostructure with close interface contact. By introducing C3N5 into BiVO4, the built Z-scheme transfer pathway provides silky channel for charge carrier migration between different moieties and enables photoexcited electrons and holes accumulated on the surface of BiVO4 and C3N5. The accelerated separation of charge carriers ensures C3N5/BiVO4 heterostructures with a powerful oxidation capacity compared with pure BiVO4. Due to the synergistic effect in Z-scheme heterostructure, the C3N5/BiVO4 demonstrated an improved photodegradation ability of rhodamine B (RhB) and methylene blue (MB) that of bare BiVO4.

Evaluating membrane bioreactor treatment for the elimination of emerging contaminants using different analytical methods

Since wastewater treatment plants (WWTPs) were not originally designed to eliminate contaminants of emerging concern (CECs), alternative strategies like membrane bioreactor (MBR) technology are gaining importance in achieving effective CEC removal and minimising their environmental impact. In this study, composite wastewater samples were collected from the biggest WWTP in the Basque Country (Galindo, Biscay) and the performance of two secondary treatments (i.e. conventional activated sludge treatment, CAS, and MBR) was assessed. The combination of a suspect screening approach using liquid chromatography tandem high-resolution mass spectrometry (LC-HRMS) and multitarget analysis by gas chromatography-mass spectrometry (GC-MS) allowed the detection of approximately 200 compounds in the WWTP effluents. The estimated removal efficiencies (REs) revealed that only 16 micropollutants exhibited enhanced removal by MBR treatment (RE > 70% or 40 - 60%). The environmental risk posed by the non-eliminated compounds after both treatments remained similar, being anthracene, clarithromycin, bis(2-ethylhexyl) phthalate (DEHP) and dilantin the most concerning pollutants (RQ > 1). The Microtox® bioassay confirmed the MBR's efficiency in removing baseline toxicity, while suggesting a similar performance of CAS treatment. These minimal differences between treatments call into question the worthiness of MBR treatment and emphasise the need to seek more efficient alternative treatment methods.

Insights into the performance of binary heterojunction photocatalysts for degradation of refractory pollutants

The uncontrolled discharge of industry- and consumer-derived micropollutants and synthetic contaminants into freshwater bodies represents a severe threat to human health and aquatic ecosystem. Inexpensive and highly efficient wastewater treatment methods are, therefore, urgently required to eliminate such non-biodegradable, recalcitrant, and toxic organic pollutants. In this context, advanced oxidation processes, particularly heterogenous photocatalysis, have received enormous attention over the past few decades. Among the different classes of photocatalysts explored by the scientific community, heterojunction photocatalysts, in general, and binary heterojunction photocatalysts, in particular, have shown tremendous promise, attributed to their many distinct advantages. As such, the present review highlights the application of diverse array of binary heterojunction photocatalysts for eliminating water-borne contaminants. Specifically, a bibliometric analysis has been conducted to identify the ongoing research trend and future prospects of heterojunction photocatalysts. It appears that metal oxide/metal oxide-based heterojunctions have superior thermal and mechanical stability compared to other heterojunction photocatalysts. In contrast, metal oxide/non-metal semiconductor-based heterojunctions are extremely effective in pollutant degradation without significant leaching of metal ions. The review concludes by proposing novel strategic research guidelines in order to make further advances in this rapidly evolving cross-disciplinary field of topical interest.

Functionalities of electrochemical fluoroquinolone sensors and biosensors

Fluoroquinolones (FQs) are a class of broad-spectrum antimicrobial agents that are used to treat variety of infectious diseases. This class of antibiotics was being used for patients exhibiting early symptoms of a human respiratory disease known as the COVID-19 virus. As a result, this outbreak causes an increase in drug-resistant strains and environmental pollution, both of which pose serious threats to biota and human health. Thus, to ensure public health and prevent antimicrobial resistance, it is crucial to develop effective detection methods for FQs determination in water bodies even at trace levels. Due to their characteristics like specificity, selectivity, sensitivity, and low detection limits, electrochemical biosensors are promising future platforms for quick and on-site monitoring of FQs residues in a variety of samples when compared to conventional detection techniques. Despite their excellent properties, biosensor stability continues to be a problem even today. However, the integration of nanomaterials (NMs) could improve biocompatibility, stability, sensitivity, and speed of response in biosensors. This review concentrated on recent developments and contemporary methods in FQs biosensors. Furthermore, a variety of modification materials on the electrode surface are discussed. We also pay more attention to the practical applications of electrochemical biosensors for FQs detection. In addition, the existing challenges, outlook, and promising future perspectives in this field have been proposed. We hope that this review can serve as a bedrock for future researchers and provide new ideas for the development of electrochemical biosensors for antibiotics detection in the future.

Coating of Filter Materials with CeO2 Nanoparticles Using a Combination of Aerodynamic Spraying and Suction

Textiles and nonwovens (including those used in ventilation systems as filters) are currently one of the main sources of patient cross-infection. Healthcare-associated infections (HAIs) affect 5-10% of patients and stand as the tenth leading cause of death. Therefore, the development of new methods for creating functional nanostructured coatings with antibacterial and antiviral properties on the surfaces of textiles and nonwoven materials is crucial for modern medicine. Antimicrobial filter technology must be high-speed, low-energy and safe if its commercialization and mass adoption are to be successful. Cerium oxide nanoparticles can act as active components in these coatings due to their high antibacterial activity and low toxicity. This paper focuses on the elaboration of a high-throughput and resource-saving method for the deposition of cerium oxide nanoparticles onto nonwoven fibrous material for use in air-conditioning filters. The proposed spraying technique is based on the use of an aerodynamic emitter and simultaneous suction. Cerium oxide nanoparticles have successfully been deposited onto the filter materials used in air conditioning systems; the antibacterial activity of the ceria-modified filters exceeded 4.0.

Pharmaceutically active compounds in aqueous environment: recent developments in their fate, occurrence and elimination for efficient water purification

The existence of pharmaceutically active compounds (PhACs) in the water is a major concern for environmentalists due to their deleterious effects on living organisms even at minuscule concentrations. This review focuses on PhACs such as analgesics and anti-inflammatory compounds, which are massively excreted in urine and account for the majority of pharmaceutical pollution. Furthermore, other PhACs such as anti-epileptics, beta-blockers and antibiotics are discussed because they also contribute significantly to pharmaceutical pollution in the aquatic environment. This review is divided into two parts. In the first part, different classes of PhACs and their fate in the wastewater environment are presented. In the second part, recent advances in the removal of PhACs by conventional wastewater treatment plants, including membrane bioreactors (MBRs), activated carbon adsorption and bench-scale studies concerning a broad range of advanced oxidation processes (AOPs) that render practical and appropriate strategies for the complete mineralization and degradation of pharmaceutical drugs, are reviewed. This review indicates that drugs like diclofenac, naproxen, paracetamol and aspirin are removed efficiently by conventional systems. Activated carbon adsorption is suitable for the removal of diclofenac and carbamazepine, whereas AOPs are leading water treatment strategies for the effective removal of reviewed PhACs.

Study on the preparation of molecularly imprinted ZrO2-TiO2 photocatalyst and the degradation performance of hydroquinone

In this paper, molecularly imprinted Zr-doped TiO2 photocatalysts (MIP-ZrO2-TiO2) were prepared by the molecularly imprinted sol-gel method for the photocatalytic degradation study of hydroquinone (HQ) as the target pollutant. For the effectiveness of the MIP-ZrO2-TiO2 catalyst in degrading HQ, the effects of Zr doping ratio, imprinted molecule dosage, calcination conditions, and pollutant concentration on its photocatalytic activity were investigated. XRD, TEM, XPS, and other techniques were used to evaluate the materials, and the findings revealed that MIP-ZrO2-TiO2 films with imprinted HQ were successfully produced on the ZrO2-TiO2 surface. The optimal preparation conditions were n(Ti):n(Zr) = 100:8, m(HQ) = 1.5 g, 550 °C for the calcination temperature, and 2 h for the calcination duration. The optimum reaction conditions were 10 mg/L HQ concentration, 1 g/L catalyst dose, and a pH of 6.91. According to the findings of photocatalytic tests, during 30 min of UV lamp (365 nm) irradiation, the degradation rates of MIP-ZrO2-TiO2, ZrO2-TiO2, and TiO2 for HQ were 90.58%, 83.94%, and 58.30%, respectively. The findings revealed that the doping of Zr metal and the addition of imprinted molecules improved the photocatalytic activity of TiO2, which can be used for the efficient treatment of low concentrations of hard-to-degrade hydroquinone.

Insight into catalytic activation of bisulfite for lomefloxacin degradation by simple composite of calcinated red mud

Antibiotic was detected in many environments, and it had posed a serious threat to human health. The advanced oxidation process has been considered an effective way to treat antibiotics. In this work, using industrial waste red mud (RM) as raw material, a series of modified RM (MRM-T; T donates the calcination temperature) was obtained via a facile calcination method and applied to activate sodium bisulfite (NaHSO₃) for the lomefloxacin (LOM) degradation. Among all MRM-T, MRM-700 exhibited superior catalytic activity, and approximately 89% of LOM (10 mg/L) was degraded at 30 min through the activation of NaHSO₃ ([NaHSO₃] = 0.5 g/L) by MRM-700 ([MRM-700] = 0.9 g/L). Moreover, the kinetic constant of LOM removal in the MRM-700/NaHSO₃ system (0.082 min^-1) was 16.4 times higher than that of the RM-raw/NaHSO₃ system (0.005 min^-1). The as-synthesized product of MRM-700 was characterized by N₂ adsorption-desorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectra. The result indicated that the catalyst possessed excellent pore structure, high specific area, and abundant Fe³⁺ sites, and the lattice of Fe₂O₃ was doped after calcination, both of which were favorable for the activation of NaHSO₃. The quenching experiment proved that •SO₄^- and •OH^- active species were produced in MRM-700/NaHSO₃ system, and •SO₄^- played a dominant role in LOM removal. In addition, the potential LOM degradation pathway was analyzed via UPLC-MS technology and density functional theory (DFT) calculation, and the toxicity of the treated LOM solution was tested by the culture of mung bean sprouts. This study not only provided a feasible strategy for the valuable use of RM to activate NaHSO₃ but also offered a cost-effective catalyst for the efficient removal of pollutants in wastewater.

Cerium oxide: synthesis, brief characterization, and optimization of the photocatalytic activity against phenazopyridine in an aqueous solution

Water pollution by antibiotics is a global crisis, and its risk is critically more severe due to the explosive use of these drug compounds. A critical effective removal method to diminish this risk is heterogeneous photocatalysis and optimizing the conditions to reach higher mineralization efficiency. CeO₂ anoparticles (NPs) were synthesized and characterized by X-ray diffraction (XRD), UV-Vis diffuse reflection spectroscopy (DRS), and Fourier transform infrared spectroscopy (FTIR) techniques. A cubic structural crystallite phase was detected that had crystallite sizes of 17.9 and 16.7 nm estimated by the Scherrer and Williamson-Hall models. A typical FTIR absorption band for the Ce-O stretching absorption has appeared at 554 cm^-1. Based on DRS data and the Kubelka-Munk and Tauc models, Eg values of 2.80, 3.06, 3.12, and 3.13 eV were obtained for n-values of 1/2, 2, 3/2, and 3, respectively. pHpzc of CeO₂ NPs was about 5.7. The direct photolysis and surface adsorption processes have no critical role in phenazopyridine (PP) removal by appearing with 2.7 and 6.7% removal efficiencies, respectively. Due to the highest photocatalytic activity of CeO₂ NPs toward PP, the effects of the critical operating variable on the activity were evaluated, and the optimal conditions were as catalyst dose, 0.7 g/L; pH, 6; irradiation time, 90 min; and C_PP, 20 ppm. The Hinshelwood kinetics equation plot was y =  - 6.6442 - 0.4677x (r² = 0.9296), in which its slope as the rate constant of the photodegradation process was 0.4677 min^-1 (corresponding to a t_1/2 value of 1.48 min).

Antibacterial Nanomaterials: Mechanisms, Impacts on Antimicrobial Resistance and Design Principles

Antimicrobial resistance (AMR) is one of the biggest threats to the environment and health. AMR rapidly invalidates conventional antibiotics, and antimicrobial nanomaterials have been increasingly explored as alternatives. Interestingly, several antimicrobial nanomaterials show AMR-independent antimicrobial effects without detectable new resistance and have therefore been suggested to prevent AMR evolution. In contrast, some are found to trigger the evolution of AMR. Given these seemingly conflicting findings, a timely discussion of the two faces of antimicrobial nanomaterials is urgently needed. This review systematically compares the killing mechanisms and structure-activity relationships of antibiotics and antimicrobial nanomaterials. We then focus on nano-microbe interactions to elucidate the impacts of molecular initiating events on AMR evolution. Finally, we provide an outlook on future antimicrobial nanomaterials and propose design principles for the prevention of AMR evolution.

Synthesis of CoFe2O4 magnetic nanoparticles for application in photocatalytic removal of azithromycin from wastewater

Azithromycin is one of the most widely used antibiotics in medicine prescribed for various infectious diseases such as COVID-19. A significant amount of this drug is always disposed of in hospital effluents. In this study, the removal of azithromycin using Cobalt-Ferrite magnetic nanoparticles (MNP) is investigated in the presence of UV light. For this purpose, magnetic nanoparticles are synthesized and added to the test samples as a catalyst in specific proportions. To determine the structural and morphological properties of nanoparticles, characterization tests including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM), and Energy-dispersive X-ray spectroscopy (EDX) are performed. 27 runs have been implemented based on the design of experiments using the Box-Behnken Design (BBD) method. Parameters are the initial concentration of azithromycin (20-60 mg/L), contact time (30-90 min), pH (6-10), and the dose of magnetic nanoparticles (20-60 mg/L). The obtained model interprets test results with high accuracy (R² = 0.9531). Also, optimization results by the software show that the contact time of 90 min, MNP dosage of 60 mg/L, pH value of 6.67, and azithromycin initial concentration of 20 mg/L leads to the highest removal efficiency of 89.71%. These numbers are in the range of other studies in this regard.

Metallic and non-metallic nanoparticles from plant, animal, and fisheries wastes: potential and valorization for application in agriculture

Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic stresses caused by increased incidences of temperature extremes, drought, unseasonal flooding, and pathogens. These threats, mostly due to anthropogenic activities, resulted in severe challenges to crop and livestock production leading to substantial economic losses. It is essential to develop environmentally viable and cost-effective green processes to alleviate these stresses in the crops, livestock, and fisheries. The application of nanomaterials in farming practice to minimize nutrient losses, pest management, and enhance stress resistance capacity is of supreme importance. This paper explores innovative methods for synthesizing metallic and non-metallic nanoparticles using plants, animals, and fisheries wastes and their valorization to mitigate abiotic and biotic stresses and input use efficiency in climate-smart and stress-resilient agriculture including crop plants, livestock, and fisheries.