The Impact of Biosurfactants on Microbial Cell Properties Leading to Hydrocarbon Bioavailability Increase

Unlocking the transcriptional profiles of an oily waste-degrading bacterial consortium

This study investigates the transcriptional profile of a novel oil-degrading microbial consortium (MC1) composed of four bacterial isolates from Brazilian oil reservoirs: Acinetobacter baumannii subsp. oleum ficedula, Bacillus velezensis, Enterobacter asburiae, and Klebsiella pneumoniae. Genomic analysis revealed an enrichment of genes associated with xenobiotic degradation, particularly for aminobenzoate, atrazine, and aromatic compounds, compared to reference genomes. The consortium demonstrated superior growth and complete oil degradation relative to individual strains. Transcriptional profiling during growth on oil indicated that key subsystems involved membrane transport, stress response, and dehydrogenase complexes, crucial for hydrocarbon uptake. Notably, genes for degrading aromatics, naphthalene, and chloroalkanes were significantly expressed during the initial oil growth phase. The dominant gene expressed was alkane 1-monooxygenase, particularly in the late growth phase. While A. baumannii exhibited the highest transcriptional activity, B. velezensis showed lower activity despite possessing numerous hydrocarbon degradation genes. The synergistic interactions among strains, confirmed by complementary gene expression patterns, position MC1 as a promising bioremediation agent for hydrocarbon-contaminated environments. However, more than collaboration, competition for nutrient uptake and resistance to stress drive gene expression and adaptation in the presence of oil as the carbon source.

Comparative analysis of risedronate and its regioisomers synthesized via microwave-assisted method: bone affinity, cytotoxicity, permeability, and therapeutic potential

BACKGROUND

Bisphosphonates (BPs) are widely used for treating bone diseases such as osteoporosis due to their strong affinity for hydroxyapatite (HA) in bones. Minor structural variations among BPs can significantly affect their therapeutic potential. This study aimed to synthesize risedronate (RSD) and its two regioisomers (2-RSD, 4-RSD) and investigate the impact of these variations on bone affinity, permeability, and cytotoxicity.

METHODS

RSD and its regioisomers were synthesized using a microwave-assisted method. Bone affinity was assessed through sorption studies on HA and two polymer-ceramic materials mimicking bone properties. Compound permeability was predicted using the Parallel Artificial Membrane Permeability Assay (PAMPA). Cytotoxicity was evaluated by analyzing the response of bacterial cells to BPs using metabolic activity assays.

RESULTS

2-RSD demonstrated a higher bone affinity and similar permeability than commercially available RSD. 2-RSD also showed reduced cytotoxicity in bacterial cell assays, indicating enhanced biocompatibility. These findings suggest that minor structural changes can lead to significant differences in therapeutic efficacy.

CONCLUSIONS

The study highlights the potential of the 2-RSD as a more effective treatment for bone diseases. Structural variations in BPs can greatly influence their biological properties, paving the way for the development of improved therapeutic agents.

Roseomonas aestuarii, as a Potential In Situ Surfactin Producer During Hydrocarbon Biodegradation

In situ biosurfactant production by hydrocarbon degrader microorganisms is an attractive approach in the bioremediation of oil contamination because of their compatibility, biodegradability, environmental safety, and stability under extreme environmental conditions. Given the high efficiency of bacteria in degrading petroleum hydrocarbons, the present work studied the detection and characterization of a biosurfactant-producing hydrocarbon degrader, Roseomonas aestuarii NB833. This strain was able to synthesize a biosurfactant during the biodegradation of crude oil, which reduced the surface tension of the aqueous system from 70 to 34 mN m-1, with a critical micelle concentration of 200 mg L-1. The emulsification ability of the biosurfactant was sustained at various temperatures, pH values, and salinities. The biosurfactant chemical structure was identified via FT-IR, LC-MS, and NMR analyses. These analyses confirmed the production of surfactin-C14 with a molecular mass of 1007 g mol-1. These results revealed the high potential of R. aestuarii NB833 as an in situ surfactin-producing bacteria for bioremediation applications under extreme environmental conditions.

Biodegradation Study of Used Engine Oil by Free and Immobilized Cells of the Pseudomonas oleovorans Strain NMA and Their Growth Kinetics

Used engine oil is considered to be one of the high-risk pollutants, and if introduced untreated in the environment, it threatens the whole ecosystem. Therefore, there is a need to find some rapid and efficient methods for the remediation of used engine oil. The present study aimed to isolate indigenous bacterial strains having the capability to degrade used engine oil. The enrichment technique was employed for the isolation of bacterial strains, which were identified by the 16S rRNA technique. As biosurfactants play a vital role in the degradation process, the activity was determined by standard protocols. The bacterial strain was isolated by the enrichment technique and identified as the Pseudomonas oleovorans strain NMA. The bacterial isolate has the ability to utilize used engine oil as the sole source of energy. The biodegradation experiment revealed that both free and immobilized cells degrade used engine oil, but immobilized cells showed the best biodegradation result, with 98-99% degradation efficiency in 7 days of incubation irrespective of all oil concentrations. For the analysis of degraded products, gas chromatography-mass spectrometry (GC-MS) was performed, which indicates that the treated samples do not carry the major engine components, i.e., methyl hexane, pyrene, and phytane, which confirmed that these were transformed by the bacterial activity. Monod kinetics further confirmed that the isolated bacterium utilizes used engine oil as the sole source of energy. These findings clearly indicate the potential of the bacterium NMA to degrade used engine oil with high kinetics, converting it into nontoxic products, and thus be a potential candidate for remediation at contaminated sites.

Physicochemical profiles of mixed ruminal microbes in response to surface tension and specific surface area

Introduction

In ruminants, a symbiotic rumen microbiota is responsible for supporting the digestion of dietary fiber and contributes to health traits closely associated with meat and milk quality. A holistic view of the physicochemical profiles of mixed rumen microbiota (MRM) is not well-illustrated.

Methods

The experiment was performed with a 3 × 4 factorial arrangement of the specific surface area (SSA: 3.37, 3.73, and 4.44 m2/g) of NDF extracted from rice straw and the surface tension (ST: 54, 46, 43, and 36 dyn/cm) of a fermented medium in a fermentation time series of 6, 12, 24, 48 h with three experimental units. Here, we used three rumen-fistulated adult Liuyang black goats as the rumen liquid donors for this experiment.

Results

It was found that increasing SSA decreased the average acetate/propionate ratio (A/P, p < 0.05) and increased the molarity of propionate (p < 0.05). Increasing ST decreased total volatile fatty acid (tVFA) concentration (p < 0.01). Greater SSA increased (p < 0.01) MRM hydrophobicity, whereas increasing ST increased MRM cell membrane permeability (p < 0.01). The neutral detergent fiber digestibility (NDFD, r = 0.937) and tVFA (r = 0.809) were positively correlated with the membrane permeability of MRM.

Discussion

The surface tension of the artificial medium and substrate-specific surface area had a significant influence on MRM's fermentation profiles, hydrophobicity, and permeability. The results suggest that physical environmental properties are key in regulating rumen fermentation function and homeostasis in the gastrointestinal tract ecosystem.

Exploring the potential of lactic acid bacteria and its molecular mechanism of action in the development of biosurfactants: Current finding and future outlook

Biosurfactants generated from lactic acid bacteria (LAB) offer an advantage over standard microbial surfactants due to their antifungal, antibacterial and antiviral capabilities. Many LAB strains have been related to the manufacture of biosurfactant, an essential chemical with uses in the treatment of a number of illnesses. Furthermore, their effectiveness as anti-adhesive agents against a diverse variety of pathogens proves their utility as anti-adhesive coating agents for medical insertional materials, reducing hospital infections without the need of synthetic drugs and chemicals. LAB produces both low and high molecular weight biosurfactants. Biosurfactants from L. pentosus, L. gasseri and L. jensenii have been reported to produce glycolipopeptides that comprise carbohydrates, proteins and lipids in the ratio of 1:3:6 with palmitic, stearic acid, and linoelaidic acid as the major fatty acid component, whereas L. plantarum has been reported to make surlactin due to the presence of non-ribosomal peptide synthetase genes (NRPS) genes. Antimicrobial activity of sophorolipids and rhamnolipids generated from LAB against B. subtilis, P. aeruginosa, S. epidermidis, Propionibacterium acnes and E. coli has been demonstrated. The safety of biosurfactants is being evaluated in compliance with a number of regulatory standards that emphasize the importance of safety in the pharmaceutical industry. This review attempts, for the first time, to provide a comprehensive evaluation of several approaches for the synthesis of biosurfactant-mediated molecular modulation in terms of their biological value. Future biosurfactant directions, as well as regulatory considerations that are crucial for the synthesis of biosurfactants from novel LAB, have also been explored.

Exploring Biosurfactants as Antimicrobial Approaches

Antibacterial resistance is one of the most important global threats to human health. Several studies have been performed to overcome this problem and infection-preventive approaches appear as promising solutions. Novel antimicrobial preventive molecules are needed and microbial biosurfactants have been explored in that scope. Considering their structure, these biomolecules can be divided into different classes, glycolipids and lipopeptides being the most studied. Besides their antimicrobial activity, biosurfactants have the advantage of being biocompatible, biodegradable, and non-toxic, which favor their application in several areas, including the health sector. Often, the most difficult infections to fight are associated with biofilm formation, particularly in medical devices. Strategies to overcome micro-organism attachment are thus emergent, and it is possible to take advantage of the antimicrobial/antibiofilm properties of biosurfactants to produce surfaces that are more resistant to the deposition/attachment of bacteria. Approaches such as the covalent bond of biosurfactants to the medical device surface leading to repulsive physical-chemical interactions or contact killing can be selected. Simpler strategies such as the absorption of biosurfactants on surfaces are also possible, eliminating micro-organisms in the vicinity. This review will focus on the physical and chemical characteristics of biosurfactants, their antimicrobial activity, antimicrobial/antibiofilm approaches, and finally on their structure-activity relationship.

Bioelectrochemical synthesis of rhamnolipids and energy production and its correlation with nitrogen in air-cathode microbial fuel cells

Microbial fuel cells (MFCs) have been recently proven to synthesise biosurfactants from waste products. In classic bioreactors, the efficiency of biosynthesis process can be controlled by the concentration of nitrogen content in the electrolyte. However, it was not known whether a similar control mechanism could be applied in current-generating conditions. In this work, the effect of nitrogen concentration on biosurfactant production from waste cooking oil was investigated. The concentration of NH4Cl in the electrolyte ranged from 0 to 1 g L-1. The maximum power density equal to 17.5 W m-3 was achieved at a concentration of 0.5 g L-1 (C/N = 2.32) and was accompanied by the highest surface tension decrease (to 54.6 mN m-1) and an emulsification activity index of 95.4%. Characterisation of the biosurfactants produced by the LC-MS/MS method showed the presence of eleven compounds belonging to the mono- and di-rhamnolipids group, most likely produced by P. aeruginosa, which was the most abundant (19.6%) in the community. Importantly, we have found a strong correlation (R = -0.96) of power and biosurfactant activity in response to C/N ratio. This study shows that nitrogen plays an important role in the current-generating metabolism of waste cooking oil. To the best of our knowledge, this is the first study where the nitrogen optimisation was investigated to improve the synthesis of biosurfactants and power generation in a bioelectrochemical system.

Antibacterial mechanism of Pseudomonas aeruginosa UKMP14T rhamnolipids against multidrug resistant Acinetobacter baumannii

Rhamnolipids, a major category of glycolipid biosurfactant, have recently gained enormous attention in medical field because of their relevance as effective antibacterial agents against a wide variety of pathogenic bacteria. Our previous studies have shown that rhamnolipids from an environmental isolate of Pseudomonas aeruginosa UKMP14T possess antibacterial, anti-adhesive and anti-biofilm activity against multidrug-resistant ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa and Enterobacter sp.) pathogens. However, the mechanism of their antibacterial action remains unclear. Thus, this study aimed to elucidate the mechanism of the antibacterial action of P. aeruginosa UKMP14T rhamnolipids by studying the changes in cells of one of the ESKAPE pathogens, Acinetobacter baumannii, which is the most difficult strain to kill. Results revealed that rhamnolipid treatment rendered A. baumannii cells more hydrophobic as evaluated through contact angle measurements. It also induced the release of cellular proteins measuring 510 μg/mL at a rhamnolipid concentration of 1000 μg/mL. In addition, rhamnolipids were found to be bactericidal in their action as they could permeate the inner membranes, leading to a leak-out of nucleotides. More than 50 % of the cells were found to be killed upon 1000 μg/mL rhamnolipid treatment as observed through fluorescence microscopy. Other cellular changes such as irregular shape and size, membrane perturbations, clumping, shrinkage and physical damage were clearly visible in SEM, FESEM and laser micrographs. Furthermore, rhamnolipid treatment inhibited the levels of acyl-homoserine lactones (AHLs) in A. baumannii, which are vital for their biofilm formation and virulence. The obtained results indicate that P. aeruginosa UKMP14T rhamnolipids target outer and inner bacterial membranes through permeation, including physical damage to the cells, leading to cell leakage. Furthermore, AHL inhibition appears to be the mechanism behind their anti-biofilm action. All these observations can be correlated to rhamnolipids' antibacterial effect against A. baumannii.

The influence of benzene on the composition, diversity and performance of the anodic bacterial community in glucose-fed microbial fuel cells

Bioelectrochemical systems offer unique opportunities to remove recalcitrant environmental pollutants in a net positive energy process, although it remains challenging because of the toxic character of such compounds. In this study, microbial fuel cell (MFC) technology was applied to investigate the benzene degradation process for more than 160 days, where glucose was used as a co-metabolite and a control. We have applied an inoculation strategy that led to the development of 10 individual microbial communities. The electrochemical dynamics of MFC efficiency was observed, along with their 1H NMR metabolic fingerprints and analysis of the microbial community. The highest power density of 120 mW/m2 was recorded in the final period of the experiment when benzene/glucose was used as fuel. This is the highest value reported in a benzene/co-substrate system. Metabolite analysis confirmed the full removal of benzene, while the dominance of fermentation products indicated the strong occurrence of non-electrogenic reactions. Based on 16S rRNA gene amplicon sequencing, bacterial community analysis revealed several petroleum-degrading microorganisms, electroactive species and biosurfactant producers. The dominant species were recognised as Citrobacter freundii and Arcobacter faecis. Strong, positive impact of the presence of benzene on the alpha diversity was recorded, underlining the high complexity of the bioelectrochemically supported degradation of petroleum compounds. This study reveals the importance of supporting the bioelectrochemical degradation process with auxiliary substrates and inoculation strategies that allow the communities to reach sufficient diversity to improve the power output and degradation efficiency in MFCs beyond the previously known limits. This study, for the first time, provides an outlook on the syntrophic activity of biosurfactant producers and petroleum degraders towards the efficient removal and conversion of recalcitrant hydrophobic compounds into electricity in MFCs.

Genetically modified indigenous Pseudomonas aeruginosa drove bacterial community to change positively toward microbial enhanced oil recovery applications

AIMS

Microbial enhanced oil recovery (MEOR) is cost-effective and eco-friendly for oil exploitation. Genetically modified biosurfactants-producing high-yield strains are promising for ex-situ MEOR. However, can they survive and produce biosurfactants in petroleum reservoirs for in-situ MEOR? What is their effect on the native bacterial community?

METHODS AND RESULTS

A genetically modified indigenous biosurfactants-producing strain Pseudomonas aeruginosa PrhlAB was bioaugmented in simulated reservoir environments. Pseudomonas aeruginosa PrhlAB could stably colonize in simulated reservoirs. Biosurfactants (200 mg l-1) were produced in simulated reservoirs after bio-augmenting strain PrhlAB. The surface tension of fluid was reduced to 32.1 mN m-1. Crude oil was emulsified with an emulsification index of 60.1%. Bio-augmenting strain PrhlAB stimulated the MEOR-related microbial activities. Hydrocarbon-degrading bacteria and biosurfactants-producing bacteria were activated, while the hydrogen sulfide-producing bacteria were inhibited. Bio-augmenting P. aeruginosa PrhlAB reduced the diversity of bacterial community, and gradually simplified the species composition. Bacteria with oil displacement potential became dominant genera, such as Shewanella, Pseudomonas, and Arcobacter.

CONCLUSIONS

Culture-based and sequence-based analyses reveal that genetically modified biosurfactants-producing strain P. aeruginosa PrhlAB are promising for in-situ MEOR as well.

The essential role of aggregation for the emulsifying ability of a fungal CYS-rich protein

Biosurfactants are in demand by the global market as natural commodities suitable for incorporation into commercial products or utilization in environmental applications. Fungi are promising producers of these molecules and have garnered interest also for their metabolic capabilities in efficiently utilizing recalcitrant and complex substrates, like hydrocarbons, plastic, etc. Within this framework, biosurfactants produced by two Fusarium solani fungal strains, isolated from plastic waste-contaminated landfill soils, were analyzed. Mycelia of these fungi were grown in the presence of 5% olive oil to drive biosurfactant production. The characterization of the emulsifying and surfactant capacity of these extracts highlighted that two different components are involved. A protein was purified and identified as a CFEM (common in fungal extracellular membrane) containing domain, revealing a good propensity to stabilize emulsions only in its aggregate form. On the other hand, an unidentified cationic smaller molecule exhibits the ability to reduce surface tension. Based on the 3D structural model of the protein, a plausible mechanism for the formation of very stable aggregates, endowed with the emulsifying ability, is proposed. KEY POINTS: • Two Fusarium solani strains are analyzed for their surfactant production. • A cationic surfactant is produced, exhibiting the ability to remarkably reduce surface tension. • An identified protein reveals a good propensity to stabilize emulsions only in its aggregate form.

Biocompatibility of Brazilian native yeast-derived sophorolipids and Trichoderma harzianum as plant-growth promoting bioformulations

The replacement of agrochemicals by biomolecules is imperative to mitigate soil contamination and inactivation of its core microbiota. Within this context, this study aimed at the interaction between a biological control agent such as Trichoderma harzianum CCT 2160 (BF-Th) and the biosurfactants (BSs) derived from the native Brazilian yeast Starmerella bombicola UFMG-CM-Y6419. Thereafter, their potential in germination of Oryza sativa L. seeds was tested. Both bioproducts were produced on site and characterized according to their chemical composition by HPLC-MS and GC-MS for BSs and SDS-PAGE gel for BF-Th. The BSs were confirmed to be sophorolipids (SLs) which is a well-studied compound with antimicrobial activity. The biocompatibility was examined by cultivating the fungus with SLs supplementation ranging from 0.1 to 2 g/L in solid and submerged fermentation. In solid state fermentation the supplementation of SLs enhanced spore production, conferring the synergy of both bioproducts. For the germination assays, bioformulations composed of SLs, BF-Th and combined (SLT) were applied in the germination of O. sativa L seeds achieving an improvement of up to 30% in morphological aspects such as root and shoot size as well as the presence of lateral roots. It was hypothesized that SLs were able to regulate phytohormones expression such as auxins and gibberellins during early stage of growth, pointing to their novel plant-growth stimulating properties. Thus, this study has pointed to the potential of hybrid bioformulations composed of biosurfactants and active endophytic fungal spores in order to augment the plant fitness and possibly the control of diseases.

Production and characterization of rhamnolipid biosurfactant from thermophilic Geobacillus stearothermophilus bacterium isolated from Uhud mountain

Introduction

Biosurfactants have been given considerable attention as they are potential candidates for several biotechnological applications.

Materials and methods

In this study, a promising thermophilic biosurfactant-producing HA-2 was isolated from the volcanic and arid region of Uhud mountain, Madinah, Saudi Arabia. It was identified using 16S rRNA gene sequence analysis. The biosurfactant production ability was screened using different methods such as the drop collapse test, oil spreading test, hemolytic activity test, CTAB test, and emulsification index. The ability of rhamnolipid production by the tested strain was confirmed by the polymerase chain reaction (PCR) of rhlAB. The affinity of thermophilic HA-2 to hydrophobic substrates was also investigated. Optimization of biosurfactant production was conducted. The biological activities of produced surfactant were investigated.

Results and discussion

The isolated HA-1 was identified as Geobacillus stearothermophilus strain OR911984. It could utilize waste sunflower frying oil (WSFF) oil as a low-cost carbon source. It showed high emulsification activity (52 ± 0.0%) and positive results toward other biosurfactant screening tests. The strain showed high cell adhesion to hexane with 41.2% cell surface hydrophobicity. Fourier-transform infrared (FTIR) spectra indicated the presence of hydrophobic chains that comprise lipids, sugars, and hydrophilic glycolipid components. The optimization results showed the optimal factors included potato peel as a carbon source with 68.8% emulsification activity, yeast extract as a nitrogen source with 60% emulsification activity, a pH of 9 (56.6%), and a temperature of 50° (72%). The kinetics showed that optimum biosurfactant production (572.4 mg/L) was recorded at 5 days of incubation. The produced rhamnolipid biosurfactant showed high antimicrobial activity against some human and plant pathogenic bacterial and fungal isolates and high antioxidant activity (90.4%). In addition, it enhanced wheat (Triticum aestivum) growth, with the greatest enhancement obtained with the 5% concentration. Therefore, thermophilic G. stearothermophilus is a promising rhamnolipid biosurfactant producer that utilizes many organic wastes. The produced biosurfactant could be applied as a promising emulsifier, antimicrobial, antioxidant, and plant growth promoter.

Postbiotics: An alternative and innovative intervention for the therapy of inflammatory bowel disease

Inflammatory Bowel Disease (IBD) is a persistent gastrointestinal (GI) tract inflammatory disease characterized by downregulated mucosal immune activities and a disrupted microbiota environment in the intestinal lumen. The involvement of bacterium postbiotics as mediators between the immune system and gut microbiome could be critical in determining why host-microbial relationships are disrupted in IBD. Postbiotics including Short-chain fatty acids (SCFAs), Organic acids, Proteins, Vitamins, Bacteriocins, and Tryptophan (Trp) are beneficial bioactive compounds formed via commensal microbiota in the gut environment during the fermentation process that can be used to improve consumer health. The use of metabolites or fragments from microorganisms can be a very attractive treatment and prevention technique in modern medicine. Postbiotics are essential in the immune system's development since they alter the barrier tightness, and the gut ecology and indirectly shape the microbiota's structure. As a result, postbiotics may be beneficial in treating or preventing various diseases, even some for which there is no effective causative medication. Postbiotics may be a promising tool for the treatment of IBD in individuals of all ages, genders, and even geographical locations. Direct distribution of postbiotics may provide a new frontier in microbiome-based therapy for IBD since it allows both the management of host homeostasis and the correction of the negative implications of dysbiosis. Further studies of the biological effects of these metabolites are expected to reveal innovative applications in medicine and beyond. This review attempts to explore the possible postbiotic-based interventions for the treatment of IBD.

Microbial biosurfactants: Multifarious applications in sustainable agriculture

Agriculture in the 21st century faces grave challenges to meet the unprecedented food demand of the burgeoning population as well as reduce the ecological footprint for achieving sustainable development goals. The extensive use of harsh synthetic surfactants in pesticides and the agrochemical industry has substantial adverse impacts on the soil and environment due to their toxic and non-biodegradable nature. Biosurfactants derived from plant, animal, and microbial sources can be an eco-friendly alternative to chemical surfactants. Microbes producing biosurfactants play a noteworthy role in biofilm formation, plant pathogen elimination, biodegradation, bioremediation, improving nutrient bioavailability, and can thrive well under stressful environments. Microbial biosurfactants are well suited for heavy metal and organic contaminants remediation in agricultural soil due to their low toxicity, high activity at fluctuating temperatures, biodegradability, and stability over a wide array of environmental conditions. This green technology will improve the agricultural soil quality by increasing the soil flushing efficiency, mobilization, and solubilization of nutrients by forming metal-biosurfactant complexes, and through the dissemination of complex nutrients. Such characteristics help it to play a pivotal role in environmental sustainability in the foreseeable future, which is required to increase the viability of biosurfactants for extensive commercial uses, making them accessible, affordable, and economically sustainable.

Microbial Biosurfactants: Antimicrobial Activity and Potential Biomedical and Therapeutic Exploits

The rapid emergence of multidrug-resistant pathogens worldwide has raised concerns regarding the effectiveness of conventional antibiotics. This can be observed in ESKAPE pathogens, among others, whose multiple resistance mechanisms have led to a reduction in effective treatment options. Innovative strategies aimed at mitigating the incidence of antibiotic-resistant pathogens encompass the potential use of biosurfactants. These surface-active agents comprise a group of unique amphiphilic molecules of microbial origin that are capable of interacting with the lipidic components of microorganisms. Biosurfactant interactions with different surfaces can affect their hydrophobic properties and as a result, their ability to alter microorganisms' adhesion abilities and consequent biofilm formation. Unlike synthetic surfactants, biosurfactants present low toxicity and high biodegradability and remain stable under temperature and pH extremes, making them potentially suitable for targeted use in medical and pharmaceutical applications. This review discusses the development of biosurfactants in biomedical and therapeutic uses as antimicrobial and antibiofilm agents, in addition to considering the potential synergistic effect of biosurfactants in combination with antibiotics. Furthermore, the anti-cancer and anti-viral potential of biosurfactants in relation to COVID-19 is also discussed.

A review of chemical signaling pathways in the quorum sensing circuit of Pseudomonas aeruginosa

Pseudomonas aeruginosa, an increasingly common competitive and biofilm organism in healthcare infection with sophisticated, interlinked and hierarchic quorum systems (Las, Rhl, PQS, and IQS), creates the greatest threats to the medical industry and has rendered prevailing chemotherapy medications ineffective. The rise of multidrug resistance has evolved into a concerning and potentially fatal occurrence for human life. P. aeruginosa biofilm development is assisted by exopolysaccharides, extracellular DNA, proteins, macromolecules, cellular signaling and interaction. Quorum sensing is a communication process between cells that involves autonomous inducers and regulators. Quorum-induced infectious agent biofilms and the synthesis of virulence factors have increased disease transmission, medication resistance, infection episodes, hospitalizations and mortality. Hence, quorum sensing may be a potential therapeutical target for bacterial illness, and developing quorum inhibitors as an anti-virulent tool could be a promising treatment strategy for existing antibiotics. Quorum quenching is a prevalent technique for treating infections caused by microbes because it diminishes microbial pathogenesis and increases microbe biofilm sensitivity to antibiotics, making it a potential candidate for drug development. This paper examines P. aeruginosa quorum sensing, the hierarchy of quorum sensing mechanism, quorum sensing inhibition and quorum sensing inhibitory agents as a drug development strategy to supplement traditional antibiotic strategies.

Degradation of polycyclic aromatic hydrocarbons in aquatic environments by a symbiotic system consisting of algae and bacteria: green and sustainable technology

Polycyclic aromatic hydrocarbons (PAHs) are genotoxic, carcinogenic, and persistent in the environment and are therefore of great concern in the environmental protection field. Due to the inherent recalcitrance, persistence and nonreactivity of PAHs, they are difficult to remediate via traditional water treatment methods. In recent years, microbial remediation has been widely used as an economical and environmentally friendly degradation technology for the treatment of PAH-contaminated water. Various bacterial and microalgal strains are capable of potentially degrading or transforming PAHs through intrinsic metabolic pathways. However, their biodegradation potential is limited by the cytotoxic effects of petroleum hydrocarbons, unfavourable environmental conditions, and biometabolic limitations. To address this limitation, microbial communities, biochemical pathways, enzyme systems, gene organization, and genetic regulation related to PAH degradation have been intensively investigated. The advantages of algal-bacterial cocultivation have been explored, and the limitations of PAHs degradation by monocultures of algae or bacteria have been overcome by algal-bacterial interactions. Therefore, a new model consisting of a "microalgal-bacterial consortium" is becoming a new management strategy for the effective degradation and removal of PAHs. This review first describes PAH pollution control technologies (physical remediation, chemical remediation, bioremediation, etc.) and proposes an algal-bacterial symbiotic system for the degradation of PAHs by analysing the advantages, disadvantages, and PAH degradation performance in this system to fill existing research gaps. Additionally, an algal-bacterial system is systematically developed, and the effects of environmental conditions are explored to optimize the degradation process and improve its technical feasibility. The aim of this paper is to provide readers with an effective green and sustainable remediation technology for removing PAHs from aquatic environments.

HADEG: A curated hydrocarbon aerobic degradation enzymes and genes database

Databases of genes and enzymes involved in hydrocarbon degradation have been previously reported. However, these databases specialize on only a specific group of hydrocarbons and/or are constructed partly based on enzyme sequences with putative functions indicated by in silico research, with no experimental evidence. Here, we present a curated database of Hydrocarbon Aerobic Degradation Enzymes and Genes (HADEG) containing proteins and genes involved in alkane, alkene, aromatic, and plastic aerobic degradation and biosurfactant production based solely on experimental evidence, which are present in bacteria, and fungi. HADEG includes 259 proteins for petroleum hydrocarbon degradation, 160 for plastic degradation, and 32 for biosurfactant production. This database will help identify and predict hydrocarbon degradation genes/pathways and biosurfactant production in genomes.

Enhancement of Electricity Production in Microbial Fuel Cells Using a Biosurfactant-Producing Co-Culture

Microbial fuel cells are bio-electrochemical devices that enable the conversion of chemical energy into bioelectricity. In this manuscript, the use of biosurfactants (Tween 80 and surfactin) and the effect of coculturing E. coli and L. plantarum were used to investigate the generation of bioelectricity coming from an H-type microbial fuel cell. In this setup, E. coli acts as an electron donor while L. plantarum acts as an in situ biosurfactant producer. It was observed that the use of exogenous surfactants enhanced electricity production compared to conventional E. coli cultures. The utilization of Tween 80 and surfactin increased the power generation from 204 µW m-2 to 506 µW m-2 and 577 µW m-2, respectively. Furthermore, co-culturing E. coli and L. plantarum also resulted in a higher power output compared to pure cultures (132.8% more when compared to using E. coli alone and 68.1% more when compared to using L. plantarum alone). Due to the presence of surfactants, the internal resistance of the cell was reduced. The experimental evidence collected here clearly indicates that the production of endogenous surfactants, as well as the addition of exogenous surfactants, will enhance MFC electricity production.

Lichenysin-like Polypeptide Production by Bacillus licheniformis B3-15 and Its Antiadhesive and Antibiofilm Properties

We report the ability of the crude biosurfactant (BS B3-15), produced by the marine, thermotolerant Bacillus licheniformis B3-15, to hinder the adhesion and biofilm formation of Pseudomonas aeruginosa ATCC 27853 and Staphylococcus aureus ATCC 29213 to polystyrene and human cells. First, we attempted to increase the BS yield, optimizing the culture conditions, and evaluated the surface-active properties of cell-free supernatants. Under phosphate deprivation (0.06 mM) and 5% saccharose, the yield of BS (1.5 g/L) increased by 37%, which could be explained by the earlier (12 h) increase in lchAA expression compared to the non-optimized condition (48 h). Without exerting any anti-bacterial activity, BS (300 µg/mL) prevented the adhesion of P. aeruginosa and S. aureus to polystyrene (47% and 36%, respectively) and disrupted the preformed biofilms, being more efficient against S. aureus (47%) than P. aeruginosa (26%). When added to human cells, the BS reduced the adhesion of P. aeruginosa and S. aureus (10× and 100,000× CFU/mL, respectively) without altering the epithelial cells' viability. As it is not cytotoxic, BS B3-15 could be useful to prevent or remove bacterial biofilms in several medical and non-medical applications.

High-throughput bioamphiphile production by ethyl methane sulphonate induced mutant of hydrocarbonoclastic Enterobacter xiangfangensis STP-3: In depth structural elucidation and application to petroleum refinery oil sludge bioremediation

The environmental release of noxious petroleum hydrocarbons (PHCs) from the petroleum refining industries is an intractable global challenge. Indigenous PHCs degrading microbes produce insufficient yield of amphiphilic biomolecules with trivial efficiency makes the bioremediation process ineffective. In this concern, the present study is focused on the production of high yield multi-functional amphiphilic biomolecule through the genetic modification of Enterobacter xiangfangensis STP-3 strain using Ethyl methane sulphonate (EMS) induced mutagenesis. Mutant M9_{E.xiangfangensis} showed 2.32-fold increased yield of bioamphiphile than wild-type strain. Novel bioamphiphile produced by M9_{E.xiangfangensis} exhibited improved surface and emulsification activities which ensure the maximum degradation of petroleum oil sludge (POS) by 86% than wild-type (72%). SARA, FT-IR, and GC-MS analyses confirmed the expedited degradation of POS and ICP-MS analysis indicated the enhanced removal of heavy metals in connection with the ample production of functionally improved bioamphiphile. FT-IR NMR, MALDI-TOF, GC-MS and LC-MS/MS analyses portrayed the lipoprotein nature of bioamphiphile comprising pentameric fatty acid moiety conjugated with the catalytic esterase moiety. Further, homology modelling and molecular docking revealed the stronger interaction of hydrophobic amino acids, leucine and isoleucine with the PHCs in the case of wild-type esterase moiety, whereas in the mutant, aromatic amino acids were majorly interacted with the long chain and branched chain alkanes, thereby exhibited better efficiency. This is the first report on the adoption of EMS induced mutagenesis strategy to ameliorate the amphiphilic biomolecules for their sustainable applications in diverse biotechnological, environmental and industrial arenas.

Biodegradation of Petroleum Sludge by Methylobacterium sp. Strain ZASH

A bacterium was isolated from sludge-contaminated soil in a petroleum refinery and tested for its ability to degrade aliphatic hydrocarbon compounds present in petroleum sludge. The isolate was grown on minimal salt media agar supplemented with 1% (w/v) petroleum sludge. The isolate was tentatively identified as Methylobacterium s p. s t rain ZASH based on the partial 16s rDNA molecular phylogeny. The bacterium grew optimally between the temperatures of 30°C and 35°C, pH 7 and 7.5, 0.5% and 1.5% (v/v) Tween 80 as the surfactant, and between 1% and 2% (w/v) peptone as the nitrogen source. The constants derived from the Haldane equation were μmax = 0.039 hr-1, Ks = 0.385% (w/v) total petroleum hydrocarbons (TPH) or 3,850 mg/L TPH, and Ki =1.12% (w/v) TPH or 11,200 mg/L. The maximum biodegradation rate exhibited by this strain was 19 mg/L/hr at an initial TPH concentration of 10,000 mg/L. Gas chromatography analysis revealed that after 15 days the strain was able to degrade all aliphatic n-alkanes investigated with different efficiencies. Shorter n-alkanes were generally degraded more rapidly than longer n-alkanes with 90% removal for C-12 compared to only 30% removal for C-36. The addition of sawdust did not improve bacterial degradation of petroleum hydrocarbons, but it assisted in the removal of remaining undegraded hydrocarbons through adsorption.

Tween-80 enhanced biodegradation of naphthalene by Klebsiella quasipneumoniae

Accidental spillage of petroleum products and industrial activities result in various hydrocarbons in the environment. While the n-hydrocarbons are readily degraded, the polycyclic aromatic hydrocarbons (PAHs) are recalcitrant to natural degradation, toxic to aquatic life and are responsible for diverse health challenges in terrestrial animals; suggesting the need for faster and more eco-friendly ways of removing PAHs from the environment. In this study, the surfactant tween-80 was used to enhance a bacterium's intrinsic naphthalene biodegradation activity. Eight bacteria isolated from oil-contaminated soils were characterised using morphological and biochemical methods. The most effective strain was identified as Klebsiella quasipneumoniae using 16S rRNA gene analysis. High-Performance Liquid Chromatography (HPLC) analyses showed that the detectable concentration of naphthalene was decreased from 500 to 157.18 μg/mL (67.4%) after 7 d in the absence of tween-80, while 99.4% removal was achieved in 3 d in the presence of tween-80 at 60 μg/mL concentration. The peaks observed in the Fourier Transform Infra-Red Spectroscopy (FTIR) spectrum of control (naphthalene), which were absent in that of the metabolites, further established naphthalene degradation. Furthermore, Gas Chromatography-Mass Spectrometer (GCMS) revealed metabolites of single aromatic ring, such as 3,4-dihydroxybenzoic acid 4-hydroxylmethylphenol, which confirmed that the removal of naphthalene is by biodegradation. Tyrosinase induction and laccase activities suggested the involvement of these enzymes in naphthalene biodegradation by the bacterium. Conclusively, a strain of K. quasipneumoniae that can effectively remove naphthalene from contaminated environments has been isolated, and its biodegradation rate was doubled in the presence of non-ionic surfactant, tween-80.

Optimization of textile effluent bacterial treatment and improvement of the process efficiency through SPB1 biosurfactant addition

The current work aims to optimize biological textile effluent treatment through the use of newly selected bacterial consortia composed of two strains: Citrobacter sedlakii RI11 and Aeromonas veronii GRI. We assessed the effect of SPB1 biosurfactant addition on color removal (CR). The process was optimized by a Box-Bhenken by examining the effect of pH, consortia density and biosurfactant value on treatment efficiency. Firstly, physicochemical analyses of the studied effluent revealed an alkaline pH along with a high content of suspended materials and large amounts of organic matter. Optimal CR and a chemical oxygen demand abatement of about 94 and 86% were obtained when treating the textile effluent at pH 5 with a total optical density of 0.4 and by incorporating 0.01% SPB1 biosurfactant. Additionally, an abolishment of phytotoxicity was registered after treatment optimization. The evaluations of the action mode of both selected bacteria during textile effluent treatment suggested the occurrence of biodegradation phenomena of dyes through enzymatic activities.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Polyphosphate accumulation and cell-surface properties by autochthonous bacteria from Argentinian Patagonia

Bacteria persisting in environments contaminated with polycyclic aromatic hydrocarbons (PAHs) have developed physiological mechanisms to counteract environmental stress. Inorganic polyphosphate accumulation represents one of these possible mechanisms. Likewise, properties such as cell-surface hydrophobicity, auto-aggregation, biofilm formation and bioemulsifying activity could facilitate interaction of microorganisms with hydrophobic organic compounds. In this work, these physiological properties were compared in indigenous bacteria from polluted sediments from Argentinian Patagonia, which were cultivated in two culture media (LBm and JPP) as a way to improve in the next future the PAHs removal. The highest hydrophobicity values were obtained in Rhodococcus strains, while Bacillus sp. B18 showed the highest auto-aggregation percentage and emulsion index. The highest numerical values of biofilm formation were determined in Rhodococcus sp. F27, Pseudomonas sp. P26, and Gordonia sp. H19 either on hydrophilic or on hydrophobic support. The qualitative and quantitative polyP determinations confirmed the presence of this biopolymer in the strains evaluated. The highest intracellular phosphate mean values were obtained in Bacillus sp. B18 in LBm and Rhodococcus erythropolis 20 in JPP. The bacteria evaluated belonging to different genera showed significant differences in their cell-surface characteristics, bioemulsifying activity and polyP accumulation. The low-cost JPP culture medium was selected for future contaminant removal studies.

A review on the bioleaching of toxic metal(loid)s from contaminated soil: Insight into the mechanism of action and the role of influencing factors

The anthropogenic activities in agriculture, industrialization, mining, and metallurgy combined with the natural weathering of rocks, have led to severe contamination of soils by toxic metal(loid)s. In an attempt to remediate these polluted sites, a plethora of conventional approaches such as Solidification/Stabilization (S/S), soil washing, electrokinetic remediation, and chemical oxidation/reduction have been used for the immobilization and removal of toxic metal(loid)s in the soil. However, these conventional methods are associated with certain limitations. These limitations include high operational costs, high energy demands, post-waste disposal difficulties, and secondary pollution. Bioleaching has proven to be a promising alternative to these conventional approaches in removing toxic metal(loid)s from contaminated soil as it is cost-effective, environmentally friendly, and esthetically pleasing. The bioleaching process is influenced by factors including pH, temperature, oxygen, and carbon dioxide supply, as well as nutrients in the medium. It is crucial to monitor these parameters before and throughout the reaction since a change in any, for instance, pH during the reaction, can alter the microbial activity and, therefore, the rate of metal leaching. However, research on these influencing factors and recent innovations has brought significant progress in bioleaching over the years. This critical review, therefore, presents the current approaches to bioleaching and the mechanisms involved in removing toxic metal(loid)s from contaminated soil. We further examined and discussed the fundamental principles of various influencing factors that necessitate optimization in the bioleaching process. Additionally, the future perspectives on adding omics for bioleaching as an emerging technology are discussed.

Surfactants, Biosurfactants, and Non-Catalytic Proteins as Key Molecules to Enhance Enzymatic Hydrolysis of Lignocellulosic Biomass

Lignocellulosic biomass (LCB) has remained a latent alternative resource to be the main substitute for oil and its derivatives in a biorefinery concept. However, its complex structure and the underdeveloped technologies for its large-scale processing keep it in a state of constant study trying to establish a consolidated process. In intensive processes, enzymes have been shown to be important molecules for the fractionation and conversion of LCB into biofuels and high-value-added molecules. However, operational challenges must be overcome before enzyme technology can be the main resource for obtaining second-generation sugars. The use of additives is shown to be a suitable strategy to improve the saccharification process. This review describes the mechanisms, roles, and effects of using additives, such as surfactants, biosurfactants, and non-catalytic proteins, separately and integrated into the enzymatic hydrolysis process of lignocellulosic biomass. In doing so, it provides a technical background in which operational biomass processing hurdles such as solids and enzymatic loadings, pretreatment burdens, and the unproductive adsorption phenomenon can be addressed.

Factors Influencing the Bioavailability of Organic Molecules to Bacterial Cells-A Mini-Review

The bioavailability of organic compounds to bacterial cells is crucial for their vital activities. This includes both compounds that are desirable to the cells (e.g., sources of energy, carbon, nitrogen, and other nutrients) and undesirable compounds that are toxic to the cells. For this reason, bioavailability is an issue of great importance in many areas of human activity that are related to bacteria, e.g., biotechnological production, bioremediation of organic pollutants, and the use of antibiotics. This article proposes a classification of factors determining bioavailability, dividing them into factors at the physicochemical level (i.e., those related to the solubility of a chemical compound and its transport in aqueous solution) and factors at the microbiological level (i.e., those related to adsorption on the cell surface and those related to transport into the cell). Awareness of the importance of and the mechanisms governing each of the factors described allows their use to change bioavailability in the desired direction.

Mobilization of contaminants: Potential for soil remediation and unintended consequences

Land treatment has become an essential waste management practice. Therefore, soil becomes a major source of contaminants including organic chemicals and potentially toxic elements (PTEs) which enter the food chain, primarily through leaching to potable water sources, plant uptake, and animal transfer. A range of soil amendments are used to manage the mobility of contaminants and subsequently their bioavailability. Various soil amendments, like desorbing agents, surfactants, and chelating agents, have been applied to increase contaminant mobility and bioavailability. These mobilizing agents are applied to increase the contaminant removal though phytoremediation, bioremediation, and soil washing. However, possible leaching of the mobilized pollutants during soil washing is a major limitation, particularly when there is no active plant uptake. This leads to groundwater contamination and toxicity to plants and soil biota. In this context, the present review provides an overview on various soil amendments used to enhance the bioavailability and mobility of organic and inorganic contaminants, thereby facilitating increased risk when soil is remediated in polluted areas. The unintended consequences of the mobilization methods, when used to remediate polluted sites, are discussed in relation to the leaching of mobilized contaminants when active plant growth is absent. The toxicity of targeted and non-targeted contaminants to microbial communities and higher plants is also discussed. Finally, this review work summarizes the existing research gaps in various contaminant mobilization approaches, and prospects for future research.

A review of the role of biosurfactants in the biodegradation of hydrophobic organopollutants: production, mode of action, biosynthesis and applications

The increasing influence of human activity and industrialization has adversely impacted the environment via pollution with organic contaminants, which are minimally soluble in water. These hydrophobic organopollutants may be present in sediment, water or biota and have created concern due to their toxic effects in mammals. The ability of microorganisms to degrade pollutants makes their use the most effective, inexpensive and ecofriendly method for environmental remediation. Microorganisms have the ability to produce natural surfactants (biosurfactants) that increase the bioavailability of hydrophobic organopollutants, which enables their use as carbon and energy sources. Due to microbial diversity in production, and the biodegradability, nontoxicity, stability and specific activity of the surfactants, the use of microbial surfactants has the potential to overcome problems associated with contamination by hydrophobic organopollutants.This review provides an overview of the current state of knowledge regarding microbial surfactant production, mode of action in the biodegradation of hydrophobic organopollutants and biosynthetic pathways as well as their applications using emergent strategy tools to remove organopollutants from the environment. It is also specified for the first time that biosurfactants are produced either as growth-associated products or secondary metabolites, and are produced in different amounts by a wide range of microorganisms.

A comparative study on chemical characterization and properties of surface active compounds from Gram-positive Bacillus and Gram-negative Ochrobactrum strains utilizing pure hydrocarbons and waste mineral lubricating oils

Mineral lubricating oils are widely used in various industrial sectors for their applications in maintenance and functioning of machineries. However, indiscriminate dumping of these used oils have resulted in polluting the natural reservoirs which subsequently destroys ecological balance. Bacteria can emulsify or lower surface tension between phases of immiscible substrates and can acquire them as their carbon and energy sources. Such a phenomenon is mediated by production of extracellular polymers which can function as eminent surface active compounds based on their surfactant or emulsifying nature. The comparison between bacterial strains (Gram-positive Bacillus stratosphericus A15 and Gram-negative Ochrobactrum pseudintermedium C1) on utilization of pure straight chain hydrocarbons, waste mineral lubricating oils as sole carbon source and chemical characterization of the synthesized surface active compounds were studied. Characterization analysis by Ultraviolet Visible spectrophotometry, Fourier transform infrared spectroscopy, Nuclear Magnetic Resonance spectroscopy, Carbon-Hydrogen-Nitrogen analysis has given detailed structural elucidation of surface active compounds. The contrasting nature of bacterial strains in utilization of different hydrocarbons of waste mineral lubricating oils was observed in Gas Chromatography-Mass Spectroscopy analysis. The variation between both strains in utilization of hydrocarbons can be manifested in chemical structural differences and properties of the produced surface active compounds. Scanning Electron Microscopy has given detailed insight into the microstructural difference of the compounds. The utilization of lubricating oils can address waste disposal problem and offer an economical feasible approach for bacterial production of surface active compounds. Our results suggest that these surface active compounds can maneuver applications in environmental bioremediation and agriculture, pharmaceuticals and food as functional biomaterials.

Efficient biodegradation of phenanthrene using Pseudomonas stutzeri LSH-PAH1 with the addition of sophorolipids: Alleviation of biotoxicity and cometabolism studies

Phenanthrene (PHE) is widely distributed, and it can cause genotoxicity in humans by interacting with enzymes in the body. A current challenge for PHE bioremediation is the inhibitory effect of biotoxic intermediates on bacterial growth. Notably, the aerobic biotransformation processes for PHE in the presence of sophorolipids have been poorly studied. Here, a PHE-degrading strain was isolated from sediments and identified as Pseudomonas stutzeri and named LSH-PAH1. It was observed that 1-naphthol (a biotoxic substance that can inhibit strain growth) was produced during the PHE metabolism process of LSH-PAH1. The biodegradation ratio increased from 21.4% to 91.7% within 48 h after the addition of sophorolipids. Unexpectedly, this addition accelerated the metabolic process for 1-naphthol rather than causing its accumulation. The cometabolism of 1-naphthol and sophorolipids alleviated the biotoxic effects for the strain, which was verified by gene expression analysis. We identified a new PHE-degrading strain and provided a mechanism for PHE biodegradation using LSH-PAH1 with the addition of sophorolipids, which provides a reference for practical applications of the bioremediation of PHE and study of the cometabolism of biotoxic intermediates.

Carboxylesterases from bacterial enrichment culture degrade strobilurin fungicides

Strobilurin fungicides are a class of persistent fungicides frequently detected in the environment. Microbes can effectively degrade strobilurins, but the mechanisms are complex and diverse. Compared with isolated strains, bacterial consortia are more robust in terms of the degradation of multiple pollutants. The enrichment culture XS19 is a group of bacterial strains enriched from soil and degrades six strobilurins at 50 mg/L within 8 d, including azoxystrobin, picoxystrobin, trifloxystrobin, kresoxim-methyl, pyraclostrobin and enestroburin. LC-Q-TOF-MS analysis confirmed that XS19 can demethylate these strobilurins via hydrolysis of the methyl ester group. Analysis of the bacterial communities suggested that Pseudomonas (69.8%), Sphingobacterium (21.2%), Delftia (6.3%), and Achromobacter (1.6%) spp. were highly associated with the removal of strobilurins in the system. Metagenomics-based comprehensive analysis of XS19 suggested that carboxylesterases in Pseudomonas and Sphingobacterium play a central role in the catabolism of strobilurins. Moreover, the carboxylesterase inhibitor bis-p-nitrophenyl phosphate inhibited the degradation activity of strobilurins in XS19. This work proved that XS19 or carboxylesterases can effectively hydrolyze strobilurins, providing a reliable bioremediation paradigm.

How humic acid and Tween80 improve the phenanthrene biodegradation efficiency: Insight from cellular characteristics and quantitative proteomics

Polycyclic aromatic hydrocarbons (PAHs) are toxic and recalcitrant pollutants, with an urgent need for bioremediation. Systematic biodegradation studies show that surfactant-mediated bioremediation is still poorly understood. Here, we investigated a comprehensive cellular response pattern of the PAH degrading strain B. subtilis ZL09-26 to (non-)green surfactants at the cellular and proteomic levels. Eight characteristic cellular factor investigations and detailed quantitative proteomics analyses were performed to understand the highly enhanced phenanthrene (PHE) degradation efficiency (2.8- to 3-fold improvement) of ZL09-26 by humic acid (HA) or Tween80. The commonly upregulated pathway and proteins (Arginine generation, LacI-family transcriptional regulator, and Lactate dehydrogenase) and various metabolic pathways (such as phenanthrene degradation upstream pathway and central carbon metabolism) jointly govern the change of cellular behaviors and improvement of PHE transport, emulsification, and degradation in a network manner. The obtained molecular knowledge empowers engineers to expand the application of surfactants in the biodegradation of PAHs and other pollutants.

Studies on antibacterial and chemotaxis properties of Pseudomonas aeruginosa TEN01 biomass-derived sustainable biosurfactant

Biosurfactant producing bacterial strains were isolated from oil-contaminated sites at Chennai Petroleum Corporation Limited, Chennai, the potential strain was selected and identified as Pseudomonas aeruginosa TEN01 by 16 S rRNA sequencing technique. Biosurfactant was produced from cassava solid waste from the sago industry. Further, it was extracted by solvent extraction and partially purified by column chromatography. The partially purified biosurfactant was qualitatively analyzed by Thin Layer Chromatography (TLC), quantitatively analyzed by anthrone assay and characterized by Fourier Transform Infra-Red Spectroscopy (FT-IR) and Gas Chromatography-Mass Spectrometry (GC-MS). R_f value and chemical groups confirm the presence of glycolipid in the partially purified biosurfactant. GC-MS results confirmed the presence of long-chain fatty acids and carbohydrate which is found to be mainly present in glycolipids. Biosurfactants are surface-active molecules which have been found to be the best alternative to chemical-based surfactants. The present study focuses on modifying the cell surface using a biosurfactant from P. aeruginosa TEN01 to enhance membrane permeabilization. Antibacterial and chemotaxis properties of biosurfactant from P. aeruginosa TEN01 were found to be better towards Xenorhabdus poinarii, a bio-pesticide producing microbial strain, X. poinarii exhibited 81.7% adhesion to hydrocarbons upon biosurfactant treatment as analyzed by Bacterial Adhesion to Hydrocarbon (BATH) assay. The alteration in the membrane permeability was tested in X. poinarii using biosurfactant and chemical surfactants viz. Sodium dodecyl sulfate (SDS) and toluene by estimating the amount of intracellular protein released. High protein recovery (51.55%) was achieved with a biosurfactant. Cell viability in the biosurfactant-treated cells was also high (93.98%) in comparison to cells treated with chemical surfactants. Increased recovery of intracellular protein along with high cell viability makes the biosurfactant a potential candidate for application in numerous environmental fields.

Bioremediation of petroleum contaminated soil through biosurfactant and Pseudomonas sp. SA3 amended design treatments

•

Potent PGP strain Pseudomonas sp SA3 was isolated from oil contaminated zone.

•

PGPR strain SA3 produce biosurfactant under petroleum stress.

•

Biosurfactant and strain SA3 amended treatments were developed.

•

Amended treatments effects the plant growth and pigments.

•

Treatment are efficient in reclamation of petroleum contaminated soil.

Toxicity of agricultural soil due to petroleum contamination has become a serious issue in recent times. Petrol oil exhibits toxic effects in agricultural crops due to the presence of various hazardous hydrocarbons. The degradation of petroleum hydrocarbon has been widely studied by the researchers that signify the requirement of effective treatments for the detoxification of petroleum contaminated soil and their reuse for growing crops. Hence, with this intention in the present study secondary metabolites “biosurfactant” (natural surfactant) along with the potent plant growth promoting (PGP) bacterial strain Pseudomonas sp. SA3 was used in the designed treatments for growing agricultural crop. The biosurfactant produced by the strain has the emulsification capacity of 43% and surface tension reduction ability to 34.5 mN/m whereas the plant growth promoting traits demonstrates 93.46 µg/mL phosphate solubilisation ability, siderophores (iron chelating compound) production upto 69.41% units and 81.41 µg/mL indole acetic acid  (IAA) production ability. Further, the results of the design treatments signifies that treatments amended with the strain SA3 and biosurfactant is effective in the management of petroleum contaminated soil indicating treatment EX 5 (1 kg soil + 1 L water + Pseudomonas sp. SA3 + 300 mL crude biosurfactant), as an efficient treatment in increment of phytochemical constituents and 10–15% enhancement in growth parameters as compared to negative control. Hence, the developed treatments can be efficaciously used for the management of petroleum contaminated soil for agronomy.

Mathematical Modelling of Canola Oil Biodegradation and Optimisation of Biosurfactant Production by an Antarctic Bacterial Consortium Using Response Surface Methodology

An Antarctic soil bacterial consortium (reference BS14) was confirmed to biodegrade canola oil, and kinetic studies on this biodegradation were carried out. The purpose of this study was to examine the ability of BS14 to produce biosurfactants during the biodegradation of canola oil. Secondary mathematical equations were chosen for kinetic analyses (Monod, Haldane, Teissier-Edwards, Aiba and Yano models). At the same time, biosurfactant production was confirmed through a preliminary screening test and further optimised using response surface methodology (RSM). Mathematical modelling demonstrated that the best-fitting model was the Haldane model for both waste (WCO) and pure canola oil (PCO) degradation. Kinetic parameters including the maximum degradation rate (μmax) and maximum concentration of substrate tolerated (Sm) were obtained. For WCO degradation these were 0.365 min-1 and 0.308%, respectively, while for PCO they were 0.307 min-1 and 0.591%, respectively. The results of all preliminary screenings for biosurfactants were positive. BS14 was able to produce biosurfactant concentrations of up to 13.44 and 14.06 mg/mL in the presence of WCO and PCO, respectively, after optimisation. The optimum values for each factor were determined using a three-dimensional contour plot generated in a central composite design, where a combination of 0.06% salinity, pH 7.30 and 1.55% initial substrate concentration led to the highest biosurfactant production when using WCO. Using PCO, the highest biosurfactant yield was obtained at 0.13% salinity, pH 7.30 and 1.25% initial substrate concentration. This study could help inform the development of large-scale bioremediation applications, not only for the degradation of canola oil but also of other hydrocarbons in the Antarctic by utilising the biosurfactants produced by BS14.

Biosurfactant is a powerful tool for the bioremediation of heavy metals from contaminated soils

Heavy metal toxicity has become a pressing ecological problem that affects the ecosystems through bioaccumulation, representing a serious public health hazard. Many conventional strategies have been developed and applied to decontaminate and restore metal-contaminated areas. However, these conventional approaches are not very suitable and environmentally safe for heavy metal remediation because of their high operational costs, high energy requirements, post-waste disposal problems, and secondary pollutant generation. Thus, biosurfactant-based bioremediation of heavy metals is a sustainable and promising approach because of its biodegradation capability, economic effectiveness, and ecofriendly nature. Pseudomonas sp., Bacillus sp., Citrobacter freundii, and Candida tropicalis have been isolated as potential sources of biosurfactants and produce compounds such as surfactin, rhamnolipids, and sophorolipids. Owing to the severity of heavy metal pollution in certain parts of the environment, biosurfactants have garnered great interest and attention as an emerging multi-functional technology of the new century for successful removal of heavy metal pollutants. The present study describes the role of biosurfactants in the bioremediation of heavy metals from contaminated environments. Moreover, the interaction mechanism underlying biosurfactant-metal complexation and metal remediation are discussed. Based on the review of the literature, further research is warranted to elucidate the mechanistic roles and explore the structural characterization and gene regulation of biosurfactants to improve their productivity and expand their applicability in bioremediation.

Bacterial glycocalyx integrity drives multicellular swarm biofilm dynamism

Exopolysaccharide (EPS) layers on the bacterial cell surface are key determinants of biofilm establishment and maintenance, leading to the formation of higher-order 3D structures that confer numerous survival benefits to a cell community. In addition to a specific cell-associated EPS glycocalyx, we recently revealed that the social δ-proteobacterium Myxococcus xanthus secretes a novel biosurfactant polysaccharide (BPS) to the extracellular milieu. Together, secretion of the two polymers (EPS and BPS) is required for type IV pilus (T4P)-dependent swarm expansion via spatio-specific biofilm expression profiles. Thus the synergy between EPS and BPS secretion somehow modulates the multicellular lifecycle of M. xanthus. Herein, we demonstrate that BPS secretion functionally alters the EPS glycocalyx via destabilization of the latter, fundamentally changing the characteristics of the cell surface. This impacts motility behaviors at the single-cell level and the aggregative capacity of cells in groups via cell-surface EPS fibril formation as well as T4P production, stability, and positioning. These changes modulate the structure of swarm biofilms via cell layering, likely contributing to the formation of internal swarm polysaccharide architecture. Together, these data reveal the manner by which the combined secretion of two distinct polymers induces single-cell changes that modulate swarm biofilm communities.

Characterization of lipopeptide biosurfactant produced by a carbazole-degrading bacterium Roseomonas cervicalis: The role of biosurfactant in carbazole solubilisation

AIM

Characterization of biosurfactant produced by a carbazole-degrading bacterium Roseomonas cervicalis and proteomic analysis of intracellular proteins of bacterium while growing on glucose and carbazole medium.

METHODS AND RESULTS

The bacterium R. cervicalis was isolated from a soil sample contaminated with crude petroleum oil. PCR amplification ascertained the existence of some hydrocarbon-degrading catabolic genes (alkB and PAH-RHDα, C12O, and C23O) in the bacterial genome. GC-MS and RP-HPLC analyses demonstrated 62% and 60% carbazole degradation, respectively, by R. cervicalis 144 h post-incubation at 37℃ and pH 6.5. Due to the paucity of protein databases, expressions of only 29 and 14 intracellular proteins were explicitly recognized and quantitated by mass spectrometry analysis when R. cervicalis was grown in carbazole and glucose medium, respectively. FTIR, NMR and HR-MS/MS analyses demonstrated the lipopeptide nature of the purified biosurfactant produced by R. cervicalis. The biosurfactant is also presumed to assist in the solubilization of carbazole.

CONCLUSION

The isolated R. cervicalis strain is a potential candidate for the bioremediation of carbazole in petroleum-oil-contaminated sites.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report of the promising R. cervicalis strain proficient in carbazole biodegradation.

Responses to Ecopollutants and Pathogenization Risks of Saprotrophic Rhodococcus Species

Under conditions of increasing environmental pollution, true saprophytes are capable of changing their survival strategies and demonstrating certain pathogenicity factors. Actinobacteria of the genus Rhodococcus, typical soil and aquatic biotope inhabitants, are characterized by high ecological plasticity and a wide range of oxidized organic substrates, including hydrocarbons and their derivatives. Their cell adaptations, such as the ability of adhering and colonizing surfaces, a complex life cycle, formation of resting cells and capsule-like structures, diauxotrophy, and a rigid cell wall, developed against the negative effects of anthropogenic pollutants are discussed and the risks of possible pathogenization of free-living saprotrophic Rhodococcus species are proposed. Due to universal adaptation features, Rhodococcus species are among the candidates, if further anthropogenic pressure increases, to move into the group of potentially pathogenic organisms with "unprofessional" parasitism, and to join an expanding list of infectious agents as facultative or occasional parasites.

Production of High Purity Biosurfactants Using Heavy Oil Residues as Carbon Source

Typically, oil pollution cleanup procedures following first response actions include dispersion. Crude oil is biodegradable, and its bioavailability can be increased when dispersed into very fine droplets by means of chemical surfactants. Although their use is widely spread in many applications, the latter may prove toxic, depending on the extent of use. The use of biological means, such as bioremediation and biosurfactants, has emerged over the past years as a very promising ‘green’ alternative technology. Biosurfactants (BSs) are amphiphilic molecules produced by microorganisms during biodegradation, thus increasing the bioavailability of the organic pollutants. It is their biodegradability and low toxicity that render BSs as a very promising alternative to the synthetic ones. Alcanivorax borkumensis SK2 strain ability to produce BSs, without any impurities from the substrate, was investigated. The biosurfactant production was scaled up by means of a sequencing batch reactor (SBR) and a heavy oil residue substrate as the carbon source. The product is free from substrate impurities, and its efficiency is tested on oil bioremediation in the marine environment. The product’s dispersion efficiency was determined by the baffled flask test. The production method proposed can have a significant impact to the market, given the ever-increasing demand for ecologically friendly, reliable, commercially viable and economically competitive environmental cleanup techniques.