Concentration and Risk Evaluation of Polycyclic Aromatic Hydrocarbons in Urban Soil in the Typical Semi-Arid City of Xi'an in Northwest China

Polycyclic aromatic hydrocarbons in indoor mosques dust in Saudi Arabia: Levels, source apportionment, human health and carcinogenic risk assessment for congregators

Mosques are important places for Muslims where they perform their prayers. The congregators are exposed to hazardous pollutants such as polycyclic aromatic hydrocarbons (PAHs) associated with dust. However, studies on PAHs exposure in religious places are scarce. Air-condition filter (ACF) dust can correspond to air quality to a certain extent, since dust particles derived from indoor and outdoor places stick to it. Therefore, the present study aimed to evaluate the 16 EPA PAHs in ACF dust from mosques to determine their levels, profiles, sources and risks. Average Σ16 PAHs concentrations were 1039, 1527, 2284 and 5208 ng/g in AC filter dust from mosques in residential (RM), suburban (SM), urban (UM) and car repair workshop (CRWM), respectively, and the differences were statistically significant (p < 0.001). Based on the molecular diagnostic PAH ratios, PAHs in mosques dust is emitted from local incomplete fuel combustion, as well as complete fossil fuels combustion sources (pyrogenic), petroleum spills, crude and fuel oil, traffic emissions, and other possible sources of industrial emissions in different functional areas. The incremental lifetime cancer risks (ILCRs) values for children and adults across the different types of mosques follow the order: CRWM > UM > SM > RM. ILCRs values for both children and adults were found in order: dermal contact > ingestion > inhalation. The cancer risk levels via ingestion for children were relatively higher than the adults. The values of cancer risk for children and adults via dermal contact and ingestion (except in RM) were categorized in the 'potentially high risk' category (> 10-4). The mean values of total cancer risks (CR) for children (5.74 × 10-3) and adults (5.07 × 10-3) in mosques also exceeded the accepted threat value (>10-4). Finally, it is recommended that regular and frequent monitoring of PAHs should be carried out in mosques to improve the quality and maintain the health of congregators around the globe.

Characteristics, sources, bio-accessibility, and health risks of organophosphate esters in urban surface dust, soil, and dustfall in the arid city of Urumqi in China

Sixty-eight paired samples of urban surface dust and soil as well as four samples of atmospheric dustfall were collected from the arid city of Urumqi in Northwest China. Thirteen organophosphate esters (OPEs) in these samples were analyzed for the characteristics, sources, bio-accessibility, and health risks of OPEs. The studied OPEs were widely detected in the urban surface dust, soil, and dustfall, with Σ13OPEs (total concentration of 13 OPEs) of 1362, 164.0, and 1367 ng/g, respectively, dominated by tris(2-chloroethyle) phosphate (TCEP), tri(2-chloroisopropyl) phosphate (TCiPP), tri(1, 3-dichloroisopropyl) phosphate (TDCiPP) and tris(2-butoxyethyl) phosphate (TBOEP), TBOEP and tri(2-ethylhexyl) phosphate (TEHP), and TCEP, TCiPP, TBOEP, triphenyl phosphate and TEHP, respectively. The low and high frequency magnetic susceptibility of surface dust and urban soil might indicate the pollution of OPEs in them. Elevated levels of the Σ13OPEs in the surface dust and urban soil were found in the west, south, and northeast of Urumqi city. The total deposition flux of dustfall-bound 13 OPEs ranged from 86.5 to 143 ng/m2/day, with a mean of 105 ng/m2/day. OPEs in the surface dust and urban soil were associated with the emissions of indoor and outdoor products containing OPEs, the dry and wet deposition of atmosphere, and the emissions of traffic. Trimethyl phosphate, triethyl phosphate, tripropyl phosphate, tri-isobutyl phosphate, TCEP, TCiPP, TDCiPP, and TBOEP in surface dust and urban soil had relatively high bio-accessibility. The bio-accessibility of OPEs was mainly affected by the physio-chemical properties of OPEs. The non-cancer and cancer risks of human exposure to OPEs in surface dust and urban soil were relatively low or negligible. The current research results may provide scientific supports for prevention and control of pollution and risks of OPEs.

Variations of methane fluxes and methane microbial community composition with soil depth in the riparian buffer zone of a sponge city park

Riparian buffers benefit both natural and man-made ecosystems by preventing soil erosion, retaining soil nutrients, and filtering pollutants. Nevertheless, the relationship between vertical methane fluxes, soil carbon, and methane microbial communities in riparian buffers remains unclear. This study examined vertical methane fluxes, soil carbon, and methane microbial communities in three different soil depths (0-5 cm, 5-10 cm, and 10-15 cm) within a riparian buffer of a Sponge City Park for one year. Structural equation model (SEM) results demonstrated that vertical methane fluxes varied with soil depths (λ = -0.37) and were primarily regulated by methanogenic community structure (λ = 0.78). Notably, mathematical regression results proposed that mcrA/pmoA ratio (R² = 0.8) and methanogenic alpha diversity/methanotrophic alpha diversity ratio (R² = 0.8) could serve as valid predictors of vertical variation in methane fluxes in the riparian buffer of urban river. These findings suggest that vertical variation of methane fluxes in riparian buffer soils is mainly influenced by carbon inputs and methane microbial abundance and community diversity. The study's results quantitatively the relationship between methane fluxes in riparian buffer soils and abiotic and biotic factors in the vertical direction, therefore contributing to the further development of mathematical models of soil methane emissions.

Characterization, sources, and risk assessment of PAHs in borehole water from the vicinity of an unlined dumpsite in Awka, Nigeria

Polycyclic aromatic hydrocarbons (PAHs) are contaminants of interest in the ecosystem due to associated health risks. Therefore, their detection in the environment is important. In this regard, the risk assessment of PAHs in borehole water near the unlined dumpsite in Anambra State was investigated. Samples of borehole water (16 each) were collected from the study and control areas during both seasons. The PAH concentrations in the borehole water samples were analyzed using gas chromatography. The mean PAH concentration in the study and control samples for the wet season varied from BL-7.65 µg/L to BL-2.98 µg/L, respectively. The study samples' dry season values ranged from BL to 3.33 µg/L, while control samples ranged from BL to 1.87 µg/L. [Formula: see text]PAHs for the wet and dry seasons varied from 5.8 to 13.94 µg/L and 4.25 to 10.09 µg/L for study and control samples, respectively. The four and five rings PAH were the most dominant group in the [Formula: see text] PAHs for the study and control samples, respectively. Diagnostic ratios suggested pyrolytic and petrogenic sources for both locations. The cluster analysis showed different sources of the congeners in the samples. The non-carcinogenic risk showed no possibility of risks via dermal and ingestion routes. In addition, the possibility of cancer risks via ingestion routes was doubtful. The carcinogenic risk index through dermal contact exceeded the acceptable limit for adults and is at a tolerable limit for children, indicating potential threats to humans, with adults more susceptible to cancer risks. Therefore, this study recommends that sanitary dumpsites be constructed for waste disposal and implementation of environmental laws to prevent underground water pollution and the environment.

Unravelling the molecular mechanism of mutagenic factors impacting human health

Environmental mutagens are chemical and physical substances in the environment that has a potential to induce a wide range of mutations and generate multiple physiological, biochemical, and genetic modifications in humans. Most mutagens are having genotoxic effects on the following generation through germ cells. The influence of germinal mutations on health will be determined by their frequency, nature, and the mechanisms that keep a specific mutation in the population. Early prenatal lethal mutations have less public health consequences than genetic illnesses linked with long-term medical and social difficulties. Physical and chemical mutagens are common mutagens found in the environment. These two environmental mutagens have been associated with multiple neurological disorders and carcinogenesis in humans. Thus in this study, we aim to unravel the molecular mechanism of physical mutagens (UV rays, X-rays, gamma rays), chemical mutagens (dimethyl sulfate (DMS), bisphenol A (BPA), polycyclic aromatic hydrocarbons (PAHs), 5-chlorocytosine (5ClC)), and several heavy metals (Ar, Pb, Al, Hg, Cd, Cr) implicated in DNA damage, carcinogenesis, chromosomal abnormalities, and oxidative stress which leads to multiple disorders and impacting human health. Biological tests for mutagen detection are crucial; therefore, we also discuss several approaches (Ames test and Mutatox test) to estimate mutagenic factors in the environment. The potential risks of environmental mutagens impacting humans require a deeper basic knowledge of human genetics as well as ongoing research on humans, animals, and their tissues and fluids.

Toxicity and Risks Assessment of Polycyclic Aromatic Hydrocarbons in River Bed Sediments of an Artisanal Crude Oil Refining Area in the Niger Delta, Nigeria

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants that possess serious risks to human health and the environment. Forty riverbed sediments samples were collected in mangrove river bed sediments where artisanal refining of crude oil takes place in the Niger Delta of Nigeria. The concentration, occurrence, distribution, toxicity and health risk of sixteen priority PAHs (16PAHs) were analysed in the samples. Apart from Nap, Acy, BkF, InP and DbE, all the other PAHs were present in all the sampled points of the studied area with BbF and BaA recording the highest mean values. The range and mean of the total PAHs (∑16PAHs) of this study are 23.461–89.886 mg/kg and 42.607 ± 14.30 mg/kg dry weight (dw), which is classified as heavily contaminated when compared to the European classification of PAHs pollution in soil (>1.0 mg/kg). The range of the effect range factors used to assess the risk of PAHs in an ecosystem (Effect rang-low (ER-L) and Effect range-median ER-M) of this study is from 0.953 to 8.80 mg/kg. PAHs below ER-L (4.0 mg/kg) indicate no toxic effect, but values above ER-M (44.79 mg/kg) indicate toxic effects to the sediments, its resources and, ultimately, the public that consumes the resources thereof; hence, the study area falls within the contaminated category. The occurrence of the high molecular weight (HMW) PAHs (73.4%) supersedes those of the lower molecular weight (LMW) PAHs (26.6%). The diagnostic ratios and principal component analysis suggest that the main contributors of PAHS into the sediments are the combustion of biomass, fossil fuel (crude oil) and pyrogenic sources. The toxic equivalent quotient (TEQ) and mutagenic equivalent quotient (MEQ) of PAHs ranged from 2.96 to 23.26 mgTEQ/kg dw and 4.47 to 23.52 mgMEQ/kg dw, and the total mean toxic equivalency quotient (∑TEQ) (15.12 ± 8.4 mg/kg) is also greater than the safe level of 0.6 mg/kg, which indicates high toxicity potency. The mean incremental lifetime cancer risks (ILCRs) of human exposure to PAHs shows that both adults TotalILCR adults (6.15 × 10−5) and children TotalILCR children (2.48 × 10−4) can be affected by dermal contact rather than ingestion and inhalation. Based on these findings, the appropriate regulatory bodies and other organs of government in the region should enforce outright stoppage of the activities of these illegal artisans who do not have control mechanisms for loss control at the site and carry out appropriate clean-up of the area.

Direct Analysis of Soil Composition for Source Apportionment by Laser Ablation Single-Particle Aerosol Mass Spectrometry

Soil has always been the most complex biomaterial on the planet. The rapid determination of the components in the soil and their original source is a prerequisite for soil quality, environmental, and human health risk assessments. In this study, the chemical compositions and source apportionment of surface soil samples collected from five sites in Shanghai, China, were successfully investigated using a laboratory-developed laser ablation single-particle aerosol mass spectrometry (LA-SPAMS) instrument combined with an adaptive resonance theory-based neural network algorithm (ART-2a) data-processing method for the first time. In total, more than 35,000 particles, ranging from 200 to 2000 nm, were sized, and around 15-20% of the particles were chemically analyzed by LA-SPAMS to generate both positive and negative mass spectra. The results show that there are significant differences in particle size distribution among the five samples, with peaks of various sizes and different profiles, while all five soil samples contain crustal elements, heavy metals, organic and inorganic components, and so forth. The chemical composition of each sample varied considerably, so different classes of SPAMS particle classes were identified, which were later grouped into seven general categories: EC-rich (containing elemental carbon), secondary components, organic nitrogen, crust, HM (containing heavy metal), PAH (containing polycyclic aromatic hydrocarbons), and NaK-rich particles, based on the dominant marked ions. The composition analysis and source apportionment showed that soil components in different areas have been affected by the local environment, such as local industrial emissions and automobile exhaust, which are usually characterized by varying degrees of mixing between the crust and environmental aerosols. In combination with the ART-2a method, LA-SPAMS enables rapid and direct analysis of soil samples based on real-time single-particle measurements, which will help in understanding the distribution, transport, and fate of the soil components, thus providing new insights into soil-quality assessment. Moreover, the established LA-SPAMS can also be practically applied to other daily inspection tasks, such as rocks, minerals, metals, ceramics, polymers, and other solid materials for ingredient analysis and quality evaluation.

Aliphatic hydrocarbons in urban runoff sediments: a case study from the megacity of Tehran, Iran

Urban runoff is known as an important contributor to diffuse a wide range of pollutants to receiving environments. Hydrocarbons are common contaminants in runoff mainly transported coupled to suspended particles and sediments. The aim of the study was to investigate the distribution and sources of Aliphatics in the sediments of Tehran's runoff drainage network. Thirty surface sediment samples were collected along with three main sub-catchments of Tehran during April 2017. The concentrations of n-Alkanes (nC-11-nC-35) and isoprenoids were determined by GC-MS, and their possible emission sources were evaluated using the biomarkers and the diagnostic ratios. Total aliphatic hydrocarbon (n-alkanes + isoprenoids) concentrations were found in the range of 2.94 to114.7 mg.kg^-1 dw with the total mean of 25.4 mg.kg-1 dw in the whole catchment. The significant concentrations of n-alkanes between n-C20 and n-C24 indicate the predominance of petrogenic origins at all stations. The CPI values range from 0.7 to 3, except the station C1S28 (CPI = 4.2). The CPI values were less than 1.6 at 70% of the stations which indicate the petrogenic nature of the aliphatic origins. Pr/Ph and LMW/HMW ratios ranged from 0.3 to 2.5 and 0.3 to 5.6 confirmed the petrogenic sources as the major origin of Aliphatics in urban runoff sediments. The ratios of n-C17/Pr and n-C18/Ph vary from 0.4 to 2.1 and 0.2 to 2.1, respectively which showed that petroleum contamination is mainly due to the degraded oil products with a lesser extent of fresh oil. Results revealed that the aliphatic hydrocarbons in the sediment samples were derived mainly from petrogenic sources such as leakage and spillage of fuels and petroleum derivatives with a relatively low contribution of biogenic sources. Vascular plants' waxes and microbial activities are identified as the most important biogenic sources of the samples. The mean concentrations of total organic carbon were 13.3,12 and14.7 mg.g^-1 dw in the sub-catchments 1, 2, and 3, respectively. Pearson correlation test demonstrated a weak correlation between the concentrations of n-alkanes and TOC (P > 0.05) with a correlation coefficient of less than 0.54 for all the sub-catchments.

Bioremediation Strategy Based on Risk Assessment of Exposure to Residual Polycyclic Aromatic Hydrocarbons

In this study, application of risk assessment was the basis for the selection of an optimum treatment option for the potential bioremediation of a hydrocarbon polluted environment. This approach was applied in a hydrocarbon polluted swampy terrain in the Niger Delta of Nigeria and could actually be applied to any other hydrocarbon polluted environment. Three nutrient sources namely compost, liquid organic fertilizer and NPK were employed in the laboratory biostimulation of the biodegradation of the hydrocarbons experiments using three levels of concentration for each nutrient as 5, 10 and 20% (w/w). Total petroleum hydrocarbon (TPH) and polycyclic aromatic hydrocarbons (PAH) were the analytes used in assessing the biodegradation potential of the various treatments. The residual concentration of these analytes post biodegradation was measured by means of gas chromatography-flame ionization detector and gas chromatography-mass spectrometry. Results indicate that compost and liquid organic fertilizer at 5% (w/w) were very poor in biostimulating the biodegradation of the hydrocarbons (less than 20% biodegradation of TPH and 3-30% biodegradation of the PAHs). NPK performed better than the other two sources of nutrients as it effected 74-84% TPH biodegradation and 39-90% PAHs biodegradation. On screening the three NPK treatment options using risk assessment, the 5% w/w NPK treatment option was rejected as its associated residual PAHs posed risks that exceeded the risk threshold of 10^-6 whereas the other two (10 and 20% w/w NPK) were successful with risk values less than the threshold. However, the 10% w/w NPK treatment offers a cheaper option between the two hence it is selected as the optimum bioremediation option based on risk management.

Analyzing environmental risk, source and spatial distribution of potentially toxic elements in dust of residential area in Xi'an urban area, China

A comprehensive study on concentration, spatial distribution, pollution, ecological-health risk and source of potentially toxic elements (PTEs) in dust of residential area in Xi'an, China were conducted to explore the environmental quality of residential area in urban district. The results show that the concentrations of V, Ni, and Mn in the dust were less than, while the contents of Cr, Zn, Pb, Cu, and Ba in the dust were obviously larger than, the soil background values of Shaanxi. The high-value area of PTEs primarily concentrated in densely populated areas, heavily trafficked areas and the surroundings of plants. Cr, Pb and Zn posed moderate enrichment and Pb possessed moderate ecological risk in the dust. The comprehensive pollution levels of PTEs in the dust were uncontaminated to moderately contaminated and their comprehensive ecological risk were moderate. The non-carcinogenic risks of the PTEs for adults and children were in the safe level and the carcinogenic risks of Ni and Cr were under the current acceptable value. Four major sources were discriminated on basis of the multivariate statistical analysis results and the content characteristics, enrichment degrees, and the spatial distribution features of the PTEs, viz. Mn, V, and Ni primarily came from natural source; Pb, Zn, and Cu mainly originated from traffic source; and Ba and Cr were respectively from construction source and coal-fired power plant source, which respectively contributed 22.8%, 28.3%, 47.3%, and 1.6% to the total content of PTEs determined in the dust.

Emerging concerns of VOCs and SVOCs in coking wastewater treatment processes: Distribution profile, emission characteristics, and health risk assessment

In this study, the distribution profiles, emission characteristics, and health risks associated with 43 volatile and semi-volatile organic compounds, including 15 phenols, 18 polycyclic aromatic hydrocarbons (PAHs), 6 BTEX, and 4 other compounds, were determined in the wastewater treatment plant (WWTP) of a coking factory (plant C) and the succeeding final WWTP (central WWTP). Total phenols with a concentration of 361,000 μg L^-1 were the predominant compounds in the influent wastewater of plant C, whereas PAHs were the major compounds in the final effluents of both coking WWTPs (84.4 μg L^-1 and 30.7 μg L^-1, respectively). The biological treatment process in plant C removed the majority of volatile organic pollutants (94.1%-99.9%). A mass balance analysis for plant C showed that biodegradation was the main removal pathway for all the target compounds (56.6%-99.9%) except BTEX, chlorinated phenols, and high molecular weight (MW) PAHs. Chlorinated phenols and high MW PAHs were mainly removed via sorption to activated sludge (51.8%-73.2% and 60.2%-75.9%, respectively). Air stripping and volatilization were the dominant mechanisms for removing the BTEX compounds (59.8%-73.8%). The total emission rates of the detected volatile pollutants from plant C and the central WWTP were 1,640 g d^-1 and 784 g d^-1, respectively. Benzene from the equalization basins of plant C and the central WWTP corresponded to the highest inhalation carcinogenic risks (1.4 × 10^-3 and 3.2 × 10^-4, respectively), which exceeded the acceptable level for human health (1 × 10^-6) recommended by the United States Environmental Protection Agency. The results showed that BaP exhibited the highest inhalation non-cancer risk, with a hazard index ratio of 70 and 30 for plant C and the central WWTP, respectively. Moreover, the excess sludge generated during wastewater treatment should also be carefully handled because it adsorbed abundant PAHs and chlorinated phenols at coking plant C (58,000 μg g^-1 and 3,500 μg g^-1) and the central WWTP (622 μg g^-1 and 54 μg g^-1).

Concentrations, distributions, sources, and risk assessment of polycyclic aromatic hydrocarbons in topsoils around a petrochemical industrial area in Algiers (Algeria)

Fifty-five samples were collected from topsoils around a petrochemical industrial area at the east of Algiers (Algeria) and analyzed for 16EPA priority PAHs in the aim to determine the concentrations, the distributions, and the possible sources of polycyclic aromatic hydrocarbons (PAHs). The results of the quantification are then devoted to the assessment of the potential risks as the toxicity, the risk for the ecosystem, and the risk for the human health. The sampling sites were classified into four categories: rural, suburban, urban, and industrial-urban. A new extraction method based on the insertion of a preliminary step, using hot water, was proposed to improve the extraction efficiency. Principal component analysis (PCA) and selected diagnostic ratio of PAHs were used to investigate the source apportionment of these PAHs. The potential toxicity, the ecological, and human health risk of PAHs in soil were estimated using the toxic equivalent quotient, the risk quotient, and the total lifetime cancer risk (TLCR) methods, respectively. The proposed new protocol gave improved recovery rates for the sixteen EPA PAHs particularly for low molecular weight PAHs, with satisfactory repeatability (RSD < 10%). The Σ16PAHs concentrations were varied from 143.73 to 4575.65 μg kg^-1 with a mean value of 1209.56 μg kg^-1. Σ16PAH concentrations found for the industrial areas would be 2 times higher than for urban soils and 3 times higher than for the rural soils. The biplots of PCA and the five diagnostic ratios suggested that the most sources of PAHs in the rural, the suburban, and the urban areas are traffic emissions, biomass burning, and coal combustion sources. Some points of the urban-industrial area are from the petroleum source. The found Σ16PAH concentrations and theirs calculated TEQs showed the following trend: industrial-urban > urban > suburban >rural. The potential cancer of human health risks calculated through TLCR results indicated that the exposure to the 7EPA PAH-contaminated soils produces negligible cancer risk to human health.

Sources apportionment and carcinogenic risk of polycyclic aromatic hydrocarbons in gas phase of urban Shanghai: Based on high volume solid phase extraction (Hi-volume SPE)

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants, posing potentially serious threats to human health. This study analyzed compositional characteristics, sources, and carcinogenic risks of PAHs in the atmospheric gas phase at an urban site in Shanghai, East China. Seventy-four gas phase samples were collected during the warm months of May-October 2018 using a high-volume solid phase extraction (Hi-volume SPE) technique. The total concentration of sixteen priority PAHs (ΣPAHs) was in the range of 5.54-182.05 ng m^-3 (average 34.47 ng m^-3) and the total of seven carcinogenic PAHs (ΣCPAHs) was in range of 0.03-1.49 ng m^-3 (average 0.48 ng m^-3), accounting for 1.47% of ΣPAHs and indicating low carcinogenic potential. Redundancy analyses indicated positive correlations between ΣPAHs and air quality, and ΣCPAHs and average high temperature, and a negative correlation between ΣPAHs and wind speed. Four possible sources, namely petroleum and petrogenic sources, traffic emissions, coal combustion, and mixed gasoline and coal combustion sources, were identified by positive matrix factorization (PMF), accounting for 62.84%, 19.31%, 10.15%, and 7.69% of ΣPAHs, respectively. The overall lifetime lung cancer risk (LLCR) through inhalation of PAHs was estimated to be at a low risk level of 1.61 × 10^-5. The LLCR based on PMF apportionment decreased in the order of mixed gasoline and coal combustion sources (47.07%) > traffic emissions (35.10%) > petroleum and petrogenic sources (11.06%) > coal combustion (6.74%). This study demonstrates the effectiveness of Hi-volume SPE in collecting and analyzing atmospheric gas phase PAHs.

Levels, sources, and toxicity assessment of polycyclic aromatic hydrocarbons in urban topsoils of an intensively developing Western Siberian city

This study investigates the levels, sources, spatial distribution, and toxicity of polycyclic aromatic hydrocarbons (PAHs) in urban soils of Tyumen, Russia. Observations of PAHs in cities of Western Siberia accomplished by a representative set of samples are very rare, even though it is one of the most urbanized parts of Russia. Therefore, it is important to estimate the status of PAHs in soils of urban environments representing vast Siberian regions. Tyumen, as one of the most intensively developing cities of Western Siberia, is a good object for such studies. Topsoil samples (0-10 cm) were collected from 241 sampling sites on a regular grid within Tyumen city limits. It was found that total concentration of 12 priority PAHs ranged from 33.4 to 2147.9 μg kg^-1, with a median value of 280.3 μg kg^-1. High-molecular-weight (HMW) PAHs were dominant, accounting for the majority (62%) of the total PAHs. Among the PAHs in soils, 4-ring compounds were predominant in all studied samples, followed by 5- and 6-ring PAHs. Phenanthrene, pyrene, fluoranthene, and benzo(ghi)perylene had values of 28%, 19%, 15%, and 10% of total PAHs, respectively. Results showed that large high-contrast anomalies of HMW PAHs were related to low-residential and transport areas. The diagnostic ratios, as well as hierarchical cluster analysis (HCA) and principal component analysis (PCA), confirmed that sources associated with the transport were the most significant, while biomass combustion played an important role as a source of PAHs in agricultural, low-residential, and recreational areas. Levels of individual PAHs, as well as total PAHs in urban soils of Tyumen, were comparable with those in non-industrial cities with similar populations but were significantly lower than those in large industrial centers. Assessment of soil toxicity using toxic equivalent quantity (TEQ_BaP) showed that the TEQ_BaP values varied from 2.0 to 388.2 μg kg^-1, with a mean value of 34.9 μg kg^-1 and median of 19.8 μg kg^-1, and were lower than those in heavy industrialized cities, but higher than those in soils of cities specializing in consumer and service industries.

Distribution pattern and health risk assessment of polycyclic aromatic hydrocarbons in the water and sediment of Algoa Bay, South Africa

Polycyclic aromatic hydrocarbons are amongst the pollutants of major concern in the terrestrial and aquatic habitats. They are mostly characterised by carcinogenic and non-carcinogenic effects. Distribution and potential health risks of sixteen priority PAHs in the water and sediment samples collected between December 2015 and June 2016 from Algoa Bay, South Africa, were evaluated. Water and sediment samples collected were extracted with liquid-liquid and soxhlet extraction methods, respectively, and then cleaned up using glass column loaded with silica gel. Final concentrations of the target PAHs were determined by gas chromatography interfaced with flame ionization detector. Results indicated that individual PAH concentrations in surface water, bottom water and sediment samples ranged from not detected (ND) to 24.66 µg/L, ND to 22.81 µg/L and ND to 5.23 mg/kg correspondingly. Total PAHs concentrations varied as 12.78-78.94 µg/L, 1.20-90.51 µg/L and 1.17-10.47 mg/kg in the three environmental matrices in that order. The non-carcinogenic risk was generally below 1, whereas risk indices (dermal contact) were above the acceptable limit of 1 × 10^-4 in the water column, suggesting possible carcinogenic effects to humans, with adults being the most vulnerable. Similarly, highest contributions to TEQs and MEQs in the sediments were made by benzo(a)pyrene and dibenzo(a,h)anthracene, the two most toxic congeners, signifying the possibility of carcinogenicity and mutagenicity in humans. Diagnostic ratios of PAHs reflect a prevailing pyrogenic input all through. The pollution was albeit moderate, yet regular check is recommended to ensure safe and healthy environment for human and aquatic lives.

Levels of Polycyclic Aromatic Hydrocarbons in the Water and Sediment of Buffalo River Estuary, South Africa and Their Health Risk Assessment

The incidence and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in the Buffalo River Estuary in the Eastern Cape Province of South Africa were assessed in this study. A total of 60 surface water and 19 sediment samples were collected from 5 sites of the estuary over a period of 6 months (December 2015 to May 2016). Extraction of PAHs from the water and sediment samples was achieved by using liquid-liquid and soxhlet extraction methods respectively, followed by column clean up with silica gel and quantification by gas chromatography-flame ionization detection. Individual PAH levels in the water and sediment samples ranged from not detected (ND) to 24.91 μg/L and ND to 7792 μg/kg, respectively. Total concentrations of the PAHs in the water and sediment samples varied as 14.91-206 μg/L and 1107-22,310 μg/kg in that order. Total levels of the contaminants were above the target values in the two matrices and were higher in summer than autumn. Although the noncarcinogenic risk of PAHs estimated in the water column through dermal absorption was very low compared with the target value, the carcinogenic risk determined was high for both adults and children. Similarly, benzo(a)pyrene and dibenzo(a,h)anthracene were found to be of higher carcinogenic and mutagenic risks in the sediments collected from the study area. Diagnostic ratios suggest that the target hydrocarbons are predominantly from pyrolytic sources. It therefore could be inferred that the water body is conspicuously polluted; hence, efforts should be made to control all the activities contributing to such magnitude of pollution at the sites.

Occurrence and Ecological and Human Health Risk Assessment of Polycyclic Aromatic Hydrocarbons in Soils from Wuhan, Central China

Polycyclic aromatic hydrocarbons are large groups of ubiquitous environmental pollutants composed of two or more fused aromatic rings. This study was designed to evaluate the distribution, potential sources, and ecological and cancer risks of eleven polycyclic aromatic hydrocarbons from Huangpi soils in Wuhan, central China. The soil samples for this study were taken from 0–10 cm and 10–20 cm soil depths. A modified matrix solid-phase dispersion extraction method was applied to extract analytes from the soil samples. A gas chromatograph equipped with a flame ionization detector was used to determine the concentrations of the compounds. The sum mean concentrations of the polycyclic aromatic hydrocarbons were 138.93 and 154.99 µg kg⁻¹ in the 0–10 cm and 10–20 cm soil depths, respectively. Benzo[a]pyrene and fluorene were the most abundant compounds in the 0–10 cm and 10–20 cm soil depths, respectively. The quantitative values of the pyrogenic index, total index, and diagnostic ratio used in this study showed that the polycyclic aromatic hydrocarbons have a pyrogenic origin. The negligible and maximum permissible concentrations values for naphthalene, acenaphthylene, acenaphthene, phenanthrene, anthracene, pyrene, benz[a]anthracene, and benzo[a]pyrene indicated a moderate ecological risk. The incremental lifetime cancer risk values for adults and children showed a low and moderate cancer risk, respectively.

Concentration and Potential Ecological Risk of PAHs in Different Layers of Soil in the Petroleum-Contaminated Areas of the Loess Plateau, China

The three most representative areas of petroleum pollution on the Loess Plateau are the research subjects of this study. In this study, 16 priority polycyclic aromatic hydrocarbons (PAHs) were determined by the QuEChERS method combined with gas chromatography-tandem mass spectrometry (GC-MS/MS). The total concentrations of ∑16PAHs in top layer soils (0–10 cm), middle layer soils (10–30 cm), and bottom layer soils (30–50 cm) ranged from 1010.67 to 18,068.80, 495.85 to 9868.56 and 213.16 to 12,552.53 μg/kg, with an average of 5502.44, 2296.94 and 2203.88 μg/kg, respectively. The 3-ring and 4-ring PAHs were the most prominent components in all soil samples. Meanwhile, the average value of ∑16PAHs decreased with the depth, from 5502.44 μg/kg (0–10 cm) to 2203.88 μg/kg (30–50 cm). The PAHs levels in the studied soils were heavily polluted (over 1000 μg/kg) according to the Soils Quality Guidelines and 95% of PAHs come from petroleum sources. Moreover, the total of PAHs in petroleum-contaminated soils was assigned a high ecological risk level. Toxic equivalency quantities (TEQs) indicated that PAHs in petroleum-contaminated soils presented relatively high toxicity.

Dechlorination of Hexachlorobenzene in Contaminated Soils Using a Nanometallic Al/CaO Dispersion Mixture: Optimization through Response Surface Methodology

Hexachlorobenzene (HCB) contamination of soils remains a significant environmental challenge all over the world. Reductive stabilization is a developing technology that can decompose the HCB with a dechlorination process. A nanometallic Al/CaO (n-Al/CaO) dispersion mixture was developed utilizing ball-milling technology in this study. The dechlorination efficiency of HCB in contaminated soils by the n-Al/CaO grinding treatment was evaluated. Response surface methodology (RSM) was employed to investigate the effects of three variables (soil moisture content, n-Al/CaO dosage and grinding time) and the interactions between these variables under the Box-Behnken Design (BBD). A high regression coefficient value (R² = 0.9807) and low p value (<0.0001) of the quadratic model indicated that the model was accurate in predicting the experimental results. The optimal soil moisture content, n-Al/CaO dosage, and grinding time were found to be 7% (m/m), 17.7% (m/m), and 24 h, respectively, in the experimental ranges and levels. Under optimal conditions, the dechlorination efficiency was 80%. The intermediate product analysis indicated that dechlorination was the process by stepwise loss of chloride atoms. The main pathway observed within 24 h was HCB → pentachlorobenzene (PeCB) → 1,2,3,4-tetrachlorobenzene (TeCB) and 1,2,4,5-TeCB. The results indicated that the moderate soil moisture content was crucial for the hydrodechlorination of HCB. A probable mechanism was proposed wherein water acted like a hydrogen donor and promoted the hydrodechlorination process. The potential application of n-Al/CaO is an environmentally-friendly and cost-effective option for decontamination of HCB-contaminated soils.