Microalgae Brewery Wastewater Treatment: Potentials, Benefits and the Challenges

Chlorella vulgaris-mediated bioremediation of food and beverage wastewater from industries in Mexico: Results and perspectives towards sustainability and circular economy

The food and beverage industries in Mexico generate substantial effluents, including nejayote, cheese-whey, and tequila vinasses, which pose significant environmental challenges due to their extreme physicochemical characteristics and excessive organic load. This study aimed to assess the potential of Chlorella vulgaris in bioremediating these complex wastewaters while also producing added-value compounds. A UV mutagenesis treatment (40 min) enhanced C. vulgaris adaptability to grow in the effluent conditions. Robust growth was observed in all three effluents, with nejayote identified as the optimal medium. Physicochemical measurements conducted pre- and post-cultivation revealed notable reductions of pollutants in nejayote, including complete removal of nitrogen and phosphates, and an 85 % reduction in COD. Tequila vinasses exhibited promise with a 66 % reduction in nitrogen and a 70 % reduction in COD, while cheese-whey showed a 17 % reduction in phosphates. Regarding valuable compounds, nejayote yielded the highest pigment (1.62 mg·g-1) and phenolic compound (3.67 mg·g-1) content, while tequila vinasses had the highest protein content (16.83 %). The main highlight of this study is that C. vulgaris successfully grew in 100 % of the three effluents (without additional water or nutrients), demonstrating its potential for sustainable bioremediation and added-value compound production. When grown in 100 % of the effluents, they become a sustainable option since they don't require an input of fresh water and therefore do not contribute to water scarcity. These findings offer a practical solution for addressing environmental challenges in the food and beverage industries within a circular economy framework.

Microalgae-mediated bioremediation: current trends and opportunities-a review

Environmental pollution poses a critical global challenge, and traditional wastewater treatment methods often prove inadequate in addressing the complexity and scale of this issue. On the other hand, microalgae exhibit diverse metabolic capabilities that enable them to remediate a wide range of pollutants, including heavy metals, organic contaminants, and excess nutrients. By leveraging the unique metabolic pathways of microalgae, innovative strategies can be developed to effectively remediate polluted environments. Therefore, this review paper highlights the potential of microalgae-mediated bioremediation as a sustainable and cost-effective alternative to conventional methods. It also highlights the advantages of utilizing microalgae and algae-bacteria co-cultures for large-scale bioremediation applications, demonstrating impressive biomass production rates and enhanced pollutant removal efficiency. The promising potential of microalgae-mediated bioremediation is emphasized, presenting a viable and innovative alternative to traditional treatment methods in addressing the global challenge of environmental pollution. This review identifies the opportunities and challenges for microalgae-based technology and proposed suggestions for future studies to tackle challenges. The findings of this review advance our understanding of the potential of microalgae-based technology wastewater treatment.

Pharmaceutical removal from wastewater by introducing cytochrome P450s into microalgae

Pharmaceuticals are of increasing environmental concern as they emerge and accumulate in surface- and groundwater systems around the world, endangering the overall health of aquatic ecosystems. Municipal wastewater discharge is a significant vector for pharmaceuticals and their metabolites to enter surface waters as humans incompletely absorb prescription drugs and excrete up to 50% into wastewater, which are subsequently incompletely removed during wastewater treatment. Microalgae present a promising target for improving wastewater treatment due to their ability to remove some pollutants efficiently. However, their inherent metabolic pathways limit their capacity to degrade more recalcitrant organic compounds such as pharmaceuticals. The human liver employs enzymes to break down and absorb drugs, and these enzymes are extensively researched during drug development, meaning the cytochrome P450 enzymes responsible for metabolizing each approved drug are well studied. Thus, unlocking or increasing cytochrome P450 expression in endogenous wastewater microalgae could be a cost-effective strategy to reduce pharmaceutical loads in effluents. Here, we discuss the challenges and opportunities associated with introducing cytochrome P450 enzymes into microalgae. We anticipate that cytochrome P450-engineered microalgae can serve as a new drug removal method and a sustainable solution that can upgrade wastewater treatment facilities to function as "mega livers".

Effect of microalgae and bacteria inoculation on the startup of bioreactors for paper pulp wastewater and biofuel production

The use of microalgae and bacteria as a strategy for the startup of bioreactors for the treatment of industrial wastewater can be a sustainable and economically viable alternative. This technology model provides satisfactory results in the nitrification and denitrification process for nitrogen removal, organic matter removal, biomass growth, sedimentation, and byproducts recovery for added-value product production. The objective of this work was to evaluate the performance of microalgae and bacteria in their symbiotic process when used in the treatment of paper pulp industry wastewater. The experiment, lasting fourteen days, utilized four bioreactors with varying concentrations in mgVSS/L of microalgae to bacteria ratio (R1-100:100, R2-100:300, R3-100:500, R4-300:100) in the startup process. Regarding the sludge volumetric index (SVI), the results show that the R1 and R2 reactors developed SVI30/SVI10 biomass in the range of 85.57 ± 7.33% and 84.72 ± 8.19%, respectively. The lipid content in the biomass of reactors R1, R2, R3 e R4 was 13%, 7%, 19%, and 22%, respectively. This high oil content at the end of the batch, may be related to the nutritional stress that the species underwent during this feeding regime. In terms of chlorophyll, the bioreactor with an initial inoculation of 100:100 showed better symbiotic growth of microalgae and bacteria, allowing exponential growth of microalgae. The total chlorophyll value for this bioreactor was 801.46 ± 196.96 μg/L. Biological removal of nitrogen from wastewater from the paper pulp industry is a challenge due to the characteristics of the effluent, but the four reactors operated in a single batch obtained good nitrogen removal. Ammonia nitrogen removal performances were 91.55 ± 9.99%, 72.13 ± 19.18%, 64.04 ± 21.34%, and 86.15 ± 30.10% in R1, R2, R3, and R4, respectively.

Consumer acceptance of microalgae as a novel food - Where are we now? And how to get further

Microalgae provide a potential new food resource for sustainable human nutrition. Many microalgae species can produce a high content of total protein with a balanced composition of essential amino acids, healthy oils rich in polyunsaturated fatty acids, carotenoids, fibers, and vitamins. These components can be made available via unprocessed microalgae or refined as individual ingredients. In either case, if added to foods, microalgae may affect taste, smell, texture, and appearance. This review focuses on how consumer acceptance of new foods - such as microalgae - can be accessed in the world of sensory science by bringing together examples from recent consumer surveys. The main aim is to obtain an overview of the attitude towards microalgae as a food ingredient in Europe. The overarching finding suggests that European consumers generally find microalgae acceptable as ingredients in food products. However, there is a prevailing preference for keeping inclusion levels low, primarily attributed to the vivid green color that algae impart to food items upon addition. Additionally, consumers tend to favor the taste of freshwater algae over marine species, often finding the latter's pronounced fishy flavor less appealing.

A critical review on the biotechnological potential of Brewers' waste: Challenges and future alternatives

In order to comply with the stringent discharge guidelines issued by governmental organizations to protect the ecosystem, the substantial amounts of effluent and sturdy wastes produced by the beer brewing process need to be discarded or handled in the most affordable and secure manner. Huge quantities of waste material released with each brew bestow a significant opportunity for the brewing sector to move towards sustainability. The concept of circular economy and the development of technological advancements in brewery waste processing have spurred interest to valorize brewery waste for implementation in various sectors of medical and food science, industrial science, and many more intriguing fields. Biotechnological methods for valorizing brewery wastes are showing a path towards green chemistry and are feasible and advantageous to environment. The study unfolds most recent prospectus for brewery waste usage and discusses major challenges with brewery waste treatment and valorization and offers suggestions for further work.

Fabrication of spirulina based activated carbons for wastewater treatment

The lack of safe drinking water is among the main problems to be faced by many areas of the world due to climate change, unrestrained population increases, and unsustainable usage of water sources. Therefore, research projects focusing on water quality, pollution, and control for sustainable water sources are in high demand to manage any unexpected changes in water sources. Drinking water sources may be contaminated with organic and inorganic chemicals, disinfection by-products, and microorganisms. Different treatment processes to remove these contaminants from water may be limited because of their high costs and time-consuming or require a multiple-barrier approach to improving performance. Therefore, there is a great need to develop an effective process for removing impurities. The primary objective of this study is to assess the effectiveness of algae-based activated carbons and develop a unique, low-cost sustainable process for wastewater treatment. Activated carbons were produced from pelletised algae powder using carbonisation and chemical activation. Chemical activation was carried out with calcium chloride (CaCl2) and zinc chloride (ZnCl2) as chemical agents. Furthermore, Brunauer-Emmett-Teller (BET) along with scanning electron microscopy (SEM) techniques were used to analyse the morphology, surface area, as well as the porosity of the prepared activated carbons to build a water column filter. Based on the results, algae-based carbon with CaCl2 activation provided a better surface area (197.7486 m2/g) and cumulative pore volume (0.105284 cm3/g). The filtration process using algae-based activated carbon can be a promising technique for water treatment with some further improvement and modifications.

Implementation of the water footprint as a water performance indicator in industrial manufacturing units located in Greece: challenges and prospects

Global water resources are under great pressure, so sustainable water and wastewater management is essential for every industrial unit. The water footprint (WF) is a multidimensional indicator of volumetric water use and pollution and is applied throughout the production cycle from the supply chain to the end user. The state-of-the art method of calculating the direct (operational) WF requires detailed records of water consumption and wastewater production per process, that are usually not available. In order to effectively implement the indicator, modifications to the standard calculation method are usually necessary, to meet the requirements and characteristics of each production unit. The present study focuses in three production units in Greece (i.e., cement, brewery, and natural cosmetics) and analyzes the modifications and assumptions required for the operational WF assessment, calculated for each production process where possible and for the whole unit. The WF assessment performed for the three case studies showed that both water consumption rates and operational WFs are within the lowest values (4.7 hL water/hL beer for brewery case study and 0.155 L/kg cement for cement case study) of the ranges reported in the international literature (4-8.8 hL water/hL beer and 0.14-0.413 L/kg cement). The total operational WF of the brewery after applying mass balances was calculated at 23.8 hL water/hL beer with virtual grey WF contributing at 79.7% and blue WF at 20.3%. For the cement manufacturing unit, using estimations from the plant operators and data from international literature, the total operational WF of the plant was assessed at 0.159 L/kg cement with blue WF contributing at 95.8%, green WF at 1%, and virtual grey WF at 3.2%. For the natural cosmetics unit, after modifying the system boundaries properly, the total operational WF was assessed at 81.6 L/kg bulk with virtual grey WF contributing at 88.8%. Through WF assessment, strategic actions could be identified to reduce water consumption and a benchmark could be provided to assess water performance between companies of the same branch.

Advanced treatment and Resource recovery of brewery wastewater by Co-cultivation of filamentous microalga Tribonema aequale and autochthonous Bacteria

To use unicellular microalgae to remove waste nutrients from brewery wastewater while converting them into algal biomass has been explored but high-cost treatment and low-value biomass associated with current technologies have prevented this concept from further attempts. In this study, a filamentous microalga Tribonema aequale was introduced and the alga can grow vigorously in brewery wastewater and algal biomass concentration could be as high as 6.45 g L-1 which can be harvested by a cost-effective filtration method. The alga together with autochthonous bacteria removed majority of waste nutrients from brewery wastewater. Specifically, 85.39% total organic carbon (TOC), 79.53% total dissolved nitrogen (TN), 93.38% ammonia nitrogen (NH3-N) and 71.33% total dissolved phosphorus (TP) in brewery wastewater were rapidly removed by co-cultivation of T. aequale and autochthonous bacteria. Treated wastewater met the national wastewater discharge quality, and resulting algal biomass contained large amounts of high-value products chrysolaminarin, palmitoleic acid (PLA) and eicosapentaenoic acid (EPA). It is anticipated that reduced cost of algal harvesting coupled with value-added biomass could make T. aequale as a promising candidate for brewery wastewater treatment and resource utilization.

Biotreatment of Industrial Wastewater using Microalgae: A Tool for a Sustainable Bioeconomy

Fresh water is one of the essential sources of life, and its requirement has increased in the past years due to population growth and industrialization. Industries use huge quantities of fresh water for their processes, and generate high quantities of wastewater rich in organic matter, nitrates, and phosphates. These effluents have contaminated the freshwater sources and there is a need to recycle this wastewater in an ecologically harmless manner. Microalgae use the nutrients in the wastewater as a medium for growth and the biomass produced are rich in nutrition that can cater growing food and energy needs. The primary and secondary metabolites of microalgae are utilized as biofuel and as active ingredients in cosmetics, animal feed, therapeutics, and pharmaceutical products. In this review, we explore food processing industries like dairy, meat, aquaculture, breweries, and their wastewater for the microalgal growth. Current treatment methods are expensive and energy demanding, which indirectly leads to higher greenhouse gas emissions. Microalgae acts as a potential biotreatment tool and mitigates carbon dioxide due to their high photosynthetic efficiency. This review aims to address the need to recycle wastewater generated from such industries and potentiality to use microalgae for biotreatment. This will help to build a circular bioeconomy by using wastewater as a valuable resource to produce valuable products.

Combined zeolite-based ammonia slow-release and algae-yeast consortia to treat piggery wastewater: Improved nitrogen and carbon migration

Integration of zeolite-based ammonia adsorption and algae-yeast consortia was developed to remediate piggery wastewater (PW) containing high concentrations of total ammonia nitrogen (TAN) and total organic carbon (TOC). After optimizing the conditions of ammonia adsorption in the PW. Zeolite addition mitigated ammonia toxicity, allowing zeolites to gradually release ammonia while effectively attenuating algal oxidative stress caused by high TAN concentration. Coupling zeolite-based adsorption and yeast co-incubation further increased TOC degradation and available C/N ratio, thus improving biomass (4.51 g/L), oil yield (2.11 g/L), and nutrient removal (84.18%-99.14%). The integrated microalgae-based PW treatment exhibited higher carbon migration into biomass (46.14%) and reduced treatment costs than conventional approaches. Simultaneously, the lowest carbon migration to wastewater also meant the smallest carbon emission into water bodies. These findings demonstrate that this novel strategy can remove nutrients in raw PW effectively and produce high oil-rich biomass in a sustainable and environmentally-friendly manner.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Wastewater treatment by using microalgae: Insights into fate, transport, and associated challenges

The remediation of wastewater with microalgae is a new topic that concentrates on devising a cost-effective and environmentally beneficial method. Multiple microalgae and bacterial consortiums have recently been evaluated to determine if they can purify effluent from various sources. Critical to a system's efficacy is its ability to remove nutrients such as nitrogen (N) and phosphorus (P) and heavy metals such as arsenic (As), lead (Pb), and copper (Cu). This study compared traditional wastewater treatment systems to microalgae-based systems for treating different types of wastewater. The research investigates the potential for microalgae to cleanse wastewater. The research also evaluates wastewater parameters, methods, and scientific techniques for extracting nutrients and heavy metals from polluted water. According to the literature, Microalgae can remove between 98.7% and 100% of nitrogen (N), phosphorous (P), and heavy metals from various effluents. The paper concludes by discussing the difficulties of using microalgae to remediate wastewater. The elimination of nutrients from the effluent is influenced by biomass production, osmotic capacity, temperature, pH, and O2 concentration. Therefore, a "pilot" study is recommended to investigate contaminants.

Advancements in algal membrane bioreactors: Overcoming obstacles and harnessing potential for eliminating hazardous pollutants from wastewater

This paper offers a comprehensive analysis of algal-based membrane bioreactors (AMBRs) and their potential for removing hazardous and toxic contaminants from wastewater. Through an identification of contaminant types and sources, as well as an explanation of AMBR operating principles, this study sheds light on the promising capabilities of AMBRs in eliminating pollutants like nitrogen, phosphorus, and organic matter, while generating valuable biomass and energy. However, challenges and limitations, such as the need for process optimization and the risk of algal-bacterial imbalance, have been identified. To overcome these obstacles, strategies like mixed cultures and bioaugmentation techniques have been proposed. Furthermore, this study explores the wider applications of AMBRs beyond wastewater treatment, including the production of value-added products and the removal of emerging contaminants. The findings underscore the significance of factors such as appropriate algal-bacterial consortia selection, hydraulic and organic loading rate optimization, and environmental factor control for the success of AMBRs. A comprehensive understanding of these challenges and opportunities can pave the way for more efficient and effective wastewater treatment processes, which are crucial for safeguarding public health and the environment.

Assessment and modeling of effluent quality, economic benefits, and greenhouse gas reduction for receiving brewery wastewater on A2O by GPS-X

Recently, breweries have been allowed to discharge brewery wastewater (BWW) to the sewage pipe network to alleviate the shortage of carbon sources of municipal wastewater treatment plants (MWTPs) under the premise of signing a contract with MWTPs in some countries. This study aims to provide a model-based method for MWTPs to evaluate the threshold, the effluent risk, the economic benefits, and the potential greenhouse gas (GHG) emissions reduction of receiving BWW. In this research, a simulation model of an anaerobic-anoxic-oxic process (A²O) receiving BWW was established based on the data of a real MWTP and brewery using GPS-X. The sensitivity factors of 189 parameters were analyzed, and several sensitive parameters were calibrated stably and dynamically. By analyzing the errors and standardized residuals, the calibrated model was proved to be high-quality and reliable. In the next phase, the impact of receiving BWW on the A²O was evaluated in terms of effluent quality, economic benefits, and GHG emissions reduction. The results showed that receiving a certain amount of BWW can effectively reduce the carbon source cost and GHG emissions for the MWTP compared with adding methanol. Though the chemical oxygen demand (COD), biochemical oxygen demand in five days (BOD₅), and total nitrogen (TN) in the effluent increased in various degrees, the effluent quality still met the discharge standard implemented by the MWTP. The study can also facilitate the modeling work for many researchers and promote more kinds of food production wastewater to be treated equally.

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

Heavy metal remediation from wastewater using microalgae: Recent advances and future trends

Microalgae-based wastewater treatment has previously been carried out in huge waste stabilization ponds. Microalgae, which can absorb carbon dioxide while reusing nutrients from sewage, has recently emerged as a new trend in the wastewater treatment business. Microalgae farming is thought to be a potential match for the modern world's energy strategy, which emphasizes low-cost and environmentally benign alternatives. Microalgae are being used to treat wastewater and make useful products. Microalgae, for example, is a promising renewable resource for producing biomass from wastewater nutrients because of its quick growth rate, short life span, and high carbon dioxide utilization efficacy. Microalgae-based bioremediation has grown in importance in the treatment of numerous types of wastewater in recent years. This solar-powered wastewater treatment technology has huge potential. However, there are still issues to be resolved in terms of land requirements, as well as the process's ecological feasibility and long-term viability, before these systems can be widely adopted. Due to cost and the need for a faultless downstream process, it is difficult to deploy this technology on a large scale. Other recent breakthroughs in wastewater microalgae farming have been investigated, such as how varied pressures affect microalgae growth and quality, as well as the number of high-value components produced. In this review, the future of this biotechnology has also been examined.

Microalgae-based wastewater treatment for developing economic and environmental sustainability: Current status and future prospects

Over the last several decades, concerns about climate change and pollution due to human activity has gained widespread attention. Microalgae have been proposed as a suitable biological platform to reduce carbon dioxide, a major greenhouse gas, while also creating commercial sources of high-value compounds such as medicines, cosmetics, food, feed, and biofuel. Industrialization of microalgae culture and valorization is still limited by significant challenges in scaling up the production processes due to economic constraints and productivity capacities. Therefore, a boost in resource usage efficiency is required. This enhancement not only lowers manufacturing costs but also enhancing the long-term viability of microalgae-based products. Using wastewater as a nutrient source is a great way to reduce manufacturing costs. Furthermore, water scarcity is one of the most important global challenges. In recent decades, industrialization, globalization, and population growth have all impacted freshwater resources. Moreover, high amounts of organic and inorganic toxins in the water due to the disposal of waste into rivers can have severe impacts on human and animal health. Microalgae cultures are a sustainable solution to tertiary and quaternary treatments since they have the ability to digest complex contaminants. This review presents biorefineries based on microalgae from all angles, including the potential for environmental pollution remediation as well as applications for bioenergy and value-added biomolecule production. An overview of current information about microalgae-based technology and a discussion of the associated hazards and opportunities for the bioeconomy are highlighted.

Comparative study between immobilized and suspended Chlorella sp in treatment of pollutant sites in Dhiba port Kingdom of Saudi Arabia

Dhiba port has a strategic location near the Neom project. Various anthropogenic activities contributed to the discharge of metals, metalloids and oil spills in the aquatic system and caused environmental pollution. Microalgae are the best microorganisms in aquatic conditions known to be capable of eliminating contaminants. In this work the Chlorella sp. was isolated from seawater, the metals, metalloids were determine using ICP- OES (Inductively Coupled Plasma-Optical Emission Spectrometer) and hydrocarbons were determine using GC-MS in different five sites in Dhiba port, after and before treated with Chlorella sp, and immobilized Chlorella sp. The growth parameters (optical density and pigment contents) of Chlorella sp and immobilized Chlorella sp. were investigated during 14 days of grown. The results showed that the most contaminated site by metals and metalloids was site no 3, by Sb, As, Be, Se, and Zn with concentrations 0.07546, 0.05709, 0.09326, 0.4618, and 0.00979 mg/L respectively, and site no 1 was the most contamination by organic compounds, so the site no 1 and site no 3 were chosen to test the efficiency of Chlorella sp. and immobilized Chlorella sp. to remove hydrocarbons and both metals and metalloids. Chlorella sp. and immobilized Chlorella sp. had completely removed metals and metalloids that were present in site 3. There were only 6 compounds remained, after treatments with immobilized alga in site 1. Immobilized Chlorella sp. is the most effective than suspended Chlorella sp in reduces the number of organic compounds in contaminated area. It is an economic tool due to simplifying harvesting and then retaining for further processing.

Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review

High-energy consumption globally has raised questions about the low environmentally friendly and high-cost processes used until now for energy production. Microbial fuel cells (MFCs) may support alternative more economically and environmentally favorable ways of bioenergy production based on their advantage of using waste. MFCs work as bio-electrochemical devices that consume organic substrates in order for the electrogenic bacteria and/or enzyme cultures to produce electricity and simultaneously lower the environmental hazardous value of waste such as COD. The utilization of organic waste as fuels in MFCs has opened a new research path for testing a variety of by-products from several industry sectors. This review presents several organic waste substrates that can be employed as fuels in MFCs for bioenergy generation and the effect of their usage on power density, COD (chemical oxygen demand) removal, and Coulombic efficiency enhancement. Moreover, a demonstration and comparison of the different types of mixed waste regarding their efficiency for energy generation via MFCs are presented. Future perspectives for manufacturing and cost analysis plans can support scale-up processes fulfilling waste-treatment efficiency and energy-output densities.

A critical review on diverse technologies for advanced wastewater treatment during SARS-CoV-2 pandemic: What do we know?

Advanced wastewater treatment technologies are effective methods and currently attract growing attention, especially in arid and semi-arid areas, for reusing water, reducing water pollution, and explicitly declining, inactivating, or removing SARS-CoV-2. Overall, removing organic matter and micropollutants prior to wastewater reuse is critical, considering that water reclamation can help provide a crop irrigation system and domestic purified water. Advanced wastewater treatment processes are highly recommended for contaminants such as monovalent ions from an abiotic source and SARS-CoV-2 from an abiotic source. This work introduces the fundamental knowledge of various methods in advanced water treatment, including membranes, filtration, Ultraviolet (UV) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Following that, an analysis of each process for organic matter removal and mitigation or prevention of SARS-CoV-2 contamination is discussed. Next, a comprehensive overview of recent advances and breakthroughs is provided for each technology. Finally, the advantages and disadvantages of each method are discussed.

Starch-Rich Microalgae as an Active Ingredient in Beer Brewing

Microalgal biomass is widely studied for its possible application in food and human nutrition due to its multiple potential health benefits, and to address raising sustainability concerns. An interesting field whereby to further explore the application of microalgae is that of beer brewing, due to the capacity of some species to accumulate large amounts of starch under specific growth conditions. The marine species Tetraselmis chui is a well-known starch producer, and was selected in this study for the production of biomass to be explored as an active ingredient in beer brewing. Cultivation was performed under nitrogen deprivation in 250 L tubular photobioreactors, producing a biomass containing 50% starch. The properties of high-starch microalgal biomass in a traditional mashing process were then assessed to identify critical steps and challenges, test the efficiency of fermentable sugar release, and develop a protocol for small-scale brewing trials. Finally, T. chui was successfully integrated at a small scale into the brewing process as an active ingredient, producing microalgae-enriched beer containing up to 20% algal biomass. The addition of microalgae had a noticeable effect on the beer properties, resulting in a product with distinct sensory properties. Regulation of pH proved to be a key parameter in the process.

Sustainable microalgal biomass production in food industry wastewater for low-cost biorefinery products: a review

Microalgae are recognized as cell factories enriched with biochemicals suitable as feedstock for bio-energy, food, feed, pharmaceuticals, and nutraceuticals applications. The industrial application of microalgae is challenging due to hurdles associated with mass cultivation and biomass recovery. The scale-up production of microalgal biomass in freshwater is not a sustainable solution due to the projected increase of freshwater demands in the coming years. Microalgae cultivation in wastewater is encouraged in recent years for sustainable bioeconomy from biorefinery processes. Wastewater from the food industry is a less-toxic growth medium for microalgal biomass production. Traditional wastewater treatment and management processes are expensive; hence it is highly relevant to use low-cost wastewater treatment processes with revenue generation through different products. Microalgae are accepted as potential biocatalysts for the bioremediation of wastewater. Microalgae based purification of wastewater technology could be a universal alternative solution for the recovery of resources from wastewater for low-cost biomass feedstock for industry. This review highlights the importance of microalgal biomass production in food processing wastewater, their characteristics, and different microalgal cultivation methods, followed by nutrient absorption mechanisms. Towards the end of the review, different microalgae biomass harvesting processes with biorefinery products, and void gaps that tend to hinder the biomass production with future perspectives will be intended. Thus, the review could claim to be valuable for sustainable microalgae biomass production for eco-friendly bioproduct conversions.

Graphical abstract

Evaluation of Euglena gracilis 815 as a New Candidate for Biodiesel Production

Euglena comprises over 200 species, of which Euglena gracilis is a model organism with a relatively high fatty acid content, making it an excellent potential source of biodiesel. This study isolated and characterized a new strain named E. gracilis 815. E. gracilis 815 cells were cultivated under light and dark conditions, with either ethanol or glucose as an external carbon source and an autotrophic medium as control. To achieve maximum active substances within a short period i.e., 6 days, the effects of the light condition and carbon source on the accumulation of bioactive ingredients of E. gracilis 815 were explored, especially fatty acids. In comparison with the industrially used E. gracilis Z strain, E. gracilis 815 exhibited high adaptability to different carbon sources and light conditions, with a comparable biomass and lipid yield. The content and composition of fatty acids of E. gracilis 815 were further determined to assess its potential for biodiesel use. Results suggested that E. gracilis 815 has biodiesel potential under glucose addition in dark culture conditions and could be a promising source for producing unsaturated fatty acids. Therefore, E. gracilis 815 is a candidate for short-chain jet fuel, with prospects for a wide variety of applications.

Enhancement of protein production using synthetic brewery wastewater by Haematococcus pluvialis

Microalgae is a sustainable protein source that has been widely applied in animal feeds, functional foods, pharmaceutical, and cosmeceutical industries. Waste products could be a potential cost-saving and nutrient-rich substrate in the cultivation of microalgae for protein production. This study aims to investigate the cultivation condition of Haematococcus pluvialis for protein synthesis using synthetic brewery wastewater (BW). H. pluvialis was cultivated in the Bold's Basal Medium (BBM) mixed with synthetic BW at different concentrations. Various cultivation conditions including brewer's spent grain hydrolysate (BSGH) concentrations, pH, and light sources were studied. The molecular weight, amino acids profile and antioxidant activity of synthesized protein were determined. Fed-batch cultivation using different percentages of fresh medium replacement for enhancing protein production was investigated. The 20% fed-batch cultivation reached 27 ×10⁵ ± 0.42 cells/mL, and 4-fold of the protein content of 64.93 ± 5.30% of dry weight was recorded on day-13. Seven essential amino acids (lysine, threonine, histidine, phenylalanine, isoleucine, leucine, methionine) were produced in fed-batch cultivation. Red LED obtained the highest DPPH radical scavenging activity of 27.47 ± 0.98%. The findings suggested that BW is a promising substrate in the cultivation of H. pluvialis to commercially produce protein for numerous industrial applications.

Microalgae Biomass as a New Potential Source of Sustainable Green Lubricants

Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.

Synergistic integration of wastewaters from second generation ethanol plant for algal biofuel production: an industrially relevant option

The present study provides an integrated method for utilizing the wastewaters from second generation (2G) ethanol pretreatment plant for microalgal biomass and lipid production. The study was conducted using a mixture of wastewaters (referred as MW; pH 4.3) generated after washing of acidic and alkaline-soaked lignocellulosic biomass prior to pretreatment process. The growth studies indicated that the thermotolerant strain of Chlorella pyrenoidosa (C. pyrenoidosa) M18 exhibited higher cell proliferation in wastewater as compared to freshwater. About 20-25% enhancement in biomass (509 mg L^-1 d^-1 ± 3.09) and lipid productivity (146 mg L^-1 d^-1 ± 1.34) was observed in MW. The total chlorophyll content and variable fluorescence by maximum fluorescence (Fv/Fm) ratio of strain cultivated in MW were 10.32 µg mL^-1 and 0.75, respectively. The use of MW also enhanced the content of saturated and monounsaturated fatty acids in total lipid. The exhausted wastewater medium obtained after harvesting the auto-flocculated biomass was also reused up to three successive growth cycles. The recycled medium without any nutrient addition could be used for two subsequent rounds with enhanced biomass (520 mg L^-1 d^-1 ± 4.07) and lipid (157.71 mg L^-1 d^-1 ± 1.09) productivities. This synergistic approach of cultivating thermotolerant microalgae with wastewater from 2G pretreatment plant provides an economical setup for development of commercial algal biofuel technology.

Progress and challenges of contaminate removal from wastewater using microalgae biomass

The utilization of microalgae in treating wastewater has been an emerging topic focussed on finding an economically sustainable and environmentally friendly approach to treating wastewater. Over the last several years, different types of con microalgae and bacteria consortia have been experimented with to explore their potential in effectively treating wastewater from different sources. The basic features considered while determining efficiency is their capacity to remove nutrients including nitrogen (N) and phosphorus (P) and heavy metals like arsenic (As), lead (Pb), and copper (Cu). This paper reviews the efficiency of microalgae as an approach to treating wastewater from different sources and compares conventional and microalgae-based treatment systems. The paper also discusses the characteristics of wastewater, conventional methods of wastewater treatment that have been used so far, and the technological mechanisms for removing nutrients and heavy metals from contaminated water. Microalgae can successfully eliminate the suspended nutrients and have been reported to successfully remove N, P, and heavy metals by up to 99.6 %, 100 %, and 13%-100 % from different types of wastewater. However, although a microalgae-based wastewater treatment system offers some benefits, it also presents some challenges as outlined in the last section of this paper. Performance in eliminating nutrients from wastewater is affected by different parameters such as temperature, biomass productivity, osmotic ability, pH, O₂ concentration. Therefore, the conducting of pilot-scale studies and exploration of the complexities of contaminants under complex environmental conditions is recommended.

Growth of marine diatoms on aquaculture wastewater supplemented with nanosilica

The aquaculture industry is a significant producer of highly nutritious food for the increasing global population. However, the wastewater generated from aquaculture ponds is an emerging global issue. The present study demonstrates the culturing of marine diatoms (Chaetoceros gracilis and Thalassiosira weissflogii) in different proportions of aquaculture wastewater (AQW) coupled with inductively coupled plasma nanosilica (ICP-SiO₂) and further explores their biorefinery potential concomitant nutrient removal. Thalassiosira weissflogii showed maximum carbohydrate content (79.47 ± 0.21 mg g^-1) in 10% and protein content (27.09 ± 0.21 mg g^-1) in 30% AQW: ICP-SiO₂. Chaetoceros gracilis showed maximum carbohydrate content (91.64 ± 0.11 mg g^-1) in 50% and protein content (27.75 ± 0.05 mg g^-1) in 10% AQW: ICP-SiO₂ respectively. Additionally, Chaetoceros gracilis showed maximum nitrate uptake in 30%, phosphate in 50%, and ammonia in 50% AQW: ICP-SiO_2. While Thalassiosira weissflogii showed maximum nitrate, phosphate, and ammonia removal efficiency in 50%, 50%, and 10% AQW: ICP-SiO₂ respectively. The study draws attention towards the utilization of diatoms in AQW treatment, aquafeed potential thus imparting a global circular bioeconomy.

Bioprocesses for the recovery of bioenergy and value-added products from wastewater: A review

Wastewater and activated sludge present a major challenge worldwide. Wastewater generated from large and small-scale industries, laundries, human residential areas and other sources is emerging as a main problem in sanitation and maintenance of smart/green cities. During the last decade, different technologies and processes have been developed to recycle and purify the wastewater. Currently, identification and fundamental consideration of development of more advanced microbial-based technologies that enable wastewater treatment and simultaneous resource recovery to produce bioenergy, biofuels and other value-added compounds (organic acids, fatty acids, bioplastics, bio-pesticides, bio-surfactants and bio-flocculants etc.) became an emerging topic. In the last several decades, significant development of bioprocesses and techniques for the extraction and recovery of mentioned valuable molecules and compounds from wastewater, waste biomass or sludge has been made. This review presents different microbial-based process routes related to resource recovery and wastewater application for the production of value-added products and bioenergy. Current process limitations and insights for future research to promote more efficient and sustainable routes for this under-utilized and continually growing waste stream are also discussed.

Advances in production of bioplastics by microalgae using food waste hydrolysate and wastewater: A review

Microalgae have emerged as an effective dual strategy for bio-valorisation of food processing wastewater and food waste hydrolysate which favours microalgae cultivation into producing value-added by products mainly lipids, carbohydrates, and proteins to the advantages of bioplastic production. Moreover, various microalgae have successfully removed high amount of organic pollutants from food processing wastewater prior discharging into the environment. Innovation of microalgae cultivating in food processing wastewater greatly reduced the cost of wastewater treatment compared to conventional approach in terms of lower carbon emissions, energy consumption, and chemical usage while producing microalgae biomass which can benefit low-cost fertilizer and bioplastic applications. The study on several microalgae species has all successfully grown on food waste hydrolysates showing high exponential growth rate and biomass production rich in proteins, lipids, carbohydrates, and fatty acids. Multiple techniques have been implemented for the extraction of food wastes to be incorporate into the bioplastic production.

Recovery of resources from industrial wastewater employing electrochemical technologies: status, advancements and perspectives

In the last two decades, water use has increased at twice the rate of population growth. The freshwater resources are getting polluted by contaminants like heavy metals, pesticides, hydrocarbons, organic waste, pathogens, fertilizers, and emerging pollutants. Globally more than 80% of the wastewater is released into the environment without proper treatment. Rapid industrialization has a dramatic effect on developing countries leading to significant losses to economic and health well-being in terms of toxicological impacts on humans and the environment through air, water, and soil pollution. This article provides an overview of physical, chemical, and biological processes to remove wastewater contaminants. A physical and/or chemical technique alone appears ineffective for recovering useful resources from wastewater containing complex components. There is a requirement for more processes or processes combined with membrane and biological processes to enhance operational efficiency and quality. More processes or those that are combined with biological and membrane-based processes are required to enhance operational efficiencies and quality. This paper intends to provide an exhaustive review of electrochemical technologies including microbial electrochemical technologies. It provides comprehensive information for the recovery of metals, nutrients, sulfur, hydrogen, and heat from industrial effluents. This article aims to give detailed information into the advancements in electrochemical processes to energy use, improve restoration performance, and achieve commercialization. It also covers bottlenecks and perspectives of this research area.

Resource recovery from industrial effluents through the cultivation of microalgae: A review

Industrial effluents such as pharmaceutical residues, pesticides, dyes, and metal processes holds abundant value-added products (VAPs), where its recovery has become essential. The purpose of such recovery is for sustainable treatment, which is an approach that considers the economic, social, and environmental aspects. Microalgae with its potential in the recovery process from effluents, can reduce energy usage of waste management strategies and regenerate nutrients such as carbon, phosphorus, and nitrogen. Microalgae cultures offer the use of inorganic materials by microalgae for their growth and the help of bacteria to produce biomass, thus, resulting in the absence of secondary emissions due to its ability to eliminate volatile organic compounds. Moreover, recovered bioactive compounds are transformed into bioethanol, bio-fertilizers, biopolymer, health supplements and animal feed. Therefore, it is significant to focus on an economical and efficient utilization of microalgae in recovering nutrients that can be further used in various commercial applications.

Treatment of Synthetic Ammonium Sulfate Wastewater by Mixed Culture of Chlorella pyrenoidosa and Enriched Nitrobacteria

Ammonium sulfate wastewater can cause eutrophication and black odor of water body. Although ammonia nitrogen can be used as nutrient of microalgae, high ammonia nitrogen levels could inhibit the growth of microalgae. Nitrobacteria can transform ammonia nitrogen into nitrate nitrogen. In this study, mono Chlorella pyrenoidosa culture (mono-C.py), synchronous mixed culture (mixed-a), and asynchronous mixed culture (mixed-b) systems were examined for their ability to treat ammonium sulfate wastewater. Nitrogen removal rate of mixed-b at the end of culture (52.96%) was higher than that of the mono-C.py (46.37%) and the mixed-a (39.11%). Higher total suspended solid concentration (2.40 g/L), crude protein yield (0.76 g/L), and heating value yield (35.73 kJ/L) were obtained in mixed-b, meanwhile with excellent settlement performance (91.43 ± 0.51%). Mechanism analysis of settlement showed that the relative abundance of floc-forming-related bacteria Sphingopyxis and Acidovorax were increased generally, while nitrification/denitrifying members were decreased in mixed-b along with the culture proceeding.

Organomineral fertilizers pastilles from microalgae grown in wastewater: Ammonia volatilization and plant growth

With the increasing demand for food, it is increasingly important to maintain soil fertility with the application of fertilizers to supply the nutritional needs of plants. However, the nutrients applied to the soil can suffer significant losses, impacting the environment, and increasing production costs. Using alternative sources, such as microalgae biomass (MB) generated in the treatment of wastewater, in the production of organomineral fertilizers is a way to recover nutrients from the sewage, in addition to contributing to the improvement in soil fertility and favoring crop growth, which can guarantee agricultural sustainability. In the present study, MB was grown in the effluent 00from the food industry and, subsequently, a pelleted organomineral fertilizer (POF) was produced consisting of the combination of MB and synthetic fertilizer (urea), in different proportions. The performance of the proposed fertilizer was analyzed for losses due to ammonia volatilization (N-NH₃) over time, for nitrogen assimilation capacity (N) by corn plants (Zea mays L.), and its structure was evaluated by scanning electron microscopy. The study concluded that the highest accumulated volatilization of N-NH₃ was in the proportion of 40% of MB and the maximum content of N is reached in the proportion of 24.55% of MB. From the proportion of 25% of MB, there is no increase in N absorbed by plants, at the same time that the volatilization of N-NH₃ grows with the increase in MB. The most important factors for obtaining these results were the interaction between MB and urea in the produced organomineral fertilizer tablet, where an increasingly thicker physical barrier was formed with the increase in the proportion of MB; in addition to the POF pH, in which the increase in MB proportions directly favored the pH increase.

Zinc biosorption by Dunaliella sp. AL-1: Mechanism and effects on cell metabolism

Phycoremediation is being considered as an eco-friendly and safe technology for toxics eradication from contaminated aquatic systems. The zinc biosorption capacity of Dunaliella sp. AL-1 was demonstrated. Zinc impacted cell growth and photosynthetic pigments accumulation showing exposure time and concentration-dependent effects. The investigation of the antioxidant protective response to zinc exposition proved a stimulation of guaiacol peroxidase (GPX) activity and an increased rate of total phenolics, flavonoids, condensed tannins and glutathione (GSH). The Box-Behnken design was used to optimize zinc removal conditions by Dunaliella sp. AL-1 strain. The maximum experimental zinc uptake was obtained when zinc concentration, algae dose, initial pH, and contact time were set at 25 mg/L, 0.5 g/L, 7.59 and 13 h 43 min, respectively. Under completely optimized conditions, the fraction of zinc removed intracellularly was much lower than the adsorbed on the cell surface. FTIR analysis Dunaliella sp. AL-1 biomass demonstrated that several functional groups as OH, CH₂, CO, PO, COO and CO may participate in the biosorption process. A comparative proteomic analysis through nano-HPLC coupled to LC-MS/MS, was performed from pre- and post-zinc treatments cells. Among 199 identified proteins, 60 were differentially expressed of which 41 proteins were down-regulated against 19 up-regulated ones. Target proteins have been demonstrated to be implicated in different metabolic processes mainly photosynthesis and antioxidant defenses.

Post treatment of anaerobically treated brewery effluent using pilot scale horizontal subsurface flow constructed wetland system

The anaerobic process is considered to be a sustainable technology for the treatment of wastewaters rich in organic matter mainly due to its lower energy consumption and production of value-added products such as biogas and organic fertilizer. However, it cannot be seen as providing 'complete' environmental solution as its treated effluents would typically not meet the desired discharge limits in terms of residual carbon, nutrients and other pollutants. This has given impetus to subsequent post treatment in order to meet the environmental standards and protect the receiving water bodies and environment. The aim of this study was to evaluate the post-treatment potential of a pilot scale two-stage horizontal subsurface flow constructed wetland (HSSFCW) system planted with Cyperus alternifolius and Typha latifolia, respectively, for enhanced removal of residual carbon and nutrient from an up-flow anaerobic sludge blanket (UASB) reactor treated brewery effluent. A pilot scale two-stage HSSFCW was integrated with the UASB reactor, and its performance efficiency was assessed for the removal of total suspended solids (TSS), chemical oxygen demand (COD), total nitrogen (TN), ammonium-nitrogen (NH4-N), total phosphorous (TP), and orthophosphate (PO43-). Macrophytes aboveground biomass and nutrient accumulation potential were also determined following standard methods. The results from this study showed that Cyperus alternifolius planted CW cell removed 68.5% TSS, 74.2% COD, 55.7% TN, 68.6% NH4-N, 41.1% TP and 48.1% PO43-. Moreover, further polishing with Typha latifolia planted CW cell enhanced the removal efficiencies to 89% TSS, 92% COD, 83.6% TN, 92.9% NH4-N, 74.4% TP, and 79.5% PO43-. Strong linearity and Pearson correlation was found between macrophyte biomass and nutrient accumulation in each CW cell (Cyperus alternifolius: R2 = 0.91, r = 0.97 for TN; R2 = 0.92, r = 0.96 for TP; and Typha latifolia: R2 = 0.96, r = 0.98 for TN and TP), and showed substantial nutrient reduction with cumulative nutrient accumulation of 1290 gTNm-2 and 708.7 gTPm-2 in the complete system. The performance of the pilot CW system as a tertiary treatment for brewery wastewater showed that the effluent meets the permissible discharge standards throughout the year excluding phosphorous.

The Potential of Chaetoceros muelleri in Bioremediation of Antibiotics: Performance and Optimization

Antibiotics are frequently applied to treat bacterial infections in humans and animals. However, most consumed antibiotics are excreted into wastewater as metabolites or in their original form. Therefore, removal of antibiotics from aquatic environments is of high research interest. In this study, we investigated the removal of sulfamethoxazole (SMX) and ofloxacin (OFX) with Chaetoceros muelleri, a marine diatom. The optimization process was conducted using response surface methodology (RSM) with two independent parameters, i.e., the initial concentration of antibiotics and contact time. The optimum removal of SMX and OFX were 39.8% (0.19 mg L⁻¹) and 42.5% (0.21 mg L⁻¹) at the initial concentration (0.5 mg L⁻¹) and contact time (6.3 days). Apart from that, the toxicity effect of antibiotics on the diatom was monitored in different SMX and OFX concentrations (0 to 50 mg L⁻¹). The protein (mg L⁻¹) and carotenoid (μg L⁻¹) content increased when the antibiotic concentration increased up to 20 mg L⁻¹, while cell viability was not significantly affected up to 20 mg L⁻¹ of antibiotic concentration. Protein content, carotenoid, and cell viability decreased during high antibiotic concentrations (more than 20 to 30 mg L⁻¹). This study revealed that the use of Chaetoceros muelleri is an appealing solution to remove certain antibiotics from wastewater.

Multifaceted roles of microalgae in the application of wastewater biotreatment: A review

Microalgae have become imperative for biological wastewater treatment. Its capability in biological purification of wastewaters from different origins while utilizing wastewater as the substrate for growth has manifest great potentials as a sustainable and economical wastewater treatment method. The wastewater grown microalgae have also been remarked in research to be a significant source of value-added bioproducts and biomaterial. This paper highlights the multifaceted roles of microalgae in wastewater treatment from the extent of microalgal bioremediation function to environmental amelioration with the involvement of microalgal biomass productivity and carbon dioxide fixation. Besides, the uptake mechanism of microalgae in wastewater treatment was discussed in detail with illustrations for a comprehensive understanding of the removal process of undesirable substances. The performance of different microalgae species in the uptake of various substances was studied and summarized in this review. The correlation of microalgal treatment efficacy with various algal strain types and the bioreactors harnessed for cultivation systems was also discussed. Studies on the alternatives to conventional wastewater treatment processes and the integration of microalgae with accordant wastewater treatment methods are presented. Current research on the biological and technical approaches for the modification of algae-based wastewater system and the maximization of biomass production is also reviewed and discussed. The last portion of the review is dedicated to the assertion of challenges and future perspectives on the development of microalgae-based wastewater treatment technology. This review serves as a useful and informative reference for readers regarding the multifaceted roles of microalgae in the application of wastewater biotreatment with detailed discussion on the uptake mechanism.

A Cyanobacteria-Based Biofilm System for Advanced Brewery Wastewater Treatment

Algal/cyanobacterial biofilm photobioreactors provide an alternative technology to conventional photosynthetic systems for wastewater treatment based on high biomass production and easy biomass harvesting at low cost. This study introduces a novel cyanobacteria-based biofilm photobioreactor and assesses its performance in post-treatment of brewery wastewater and biomass production. Two different supporting materials (glass/polyurethane) were tested to investigate the effect of surface hydrophobicity on biomass attachment and overall reactor performance. The reactor exhibited high removal efficiency (over 65%) of the wastewater’s pollutants (chemical oxygen demand, nitrate, nitrite, ammonium, orthophosphate, and total Kjeldahl nitrogen), while biomass per reactor surface reached 13.1 and 12.8 g·m−2 corresponding to 406 and 392 mg·L−1 for glass and polyurethane, respectively, after 15 days of cultivation. The hydrophilic glass surface favored initial biomass adhesion, although eventually both materials yielded complete biomass attachment, highlighting that cell-to-cell interactions are the dominant adhesion mechanism in mature biofilms. It was also found that the biofilm accumulated up to 61% of its dry weight in carbohydrates at the end of cultivation, thus making the produced biomass a suitable feedstock for bioethanol production.

Microalgae based wastewater treatment: a shifting paradigm for the developing nations

Decreased water quality in freshwater resources due to untreated or partially treated wastewater disposal resulting in eutrophication has led to water scarcity. Hence, the present work was aimed to determine the effectiveness of Chlorella vulgaris for municipal wastewater treatment in terms of various physico-chemical parameters and nutrient removal. Primary treated effluent was collected from a sewage treatment plant as an influent for the study. Parameters analyzed during the lab-scale batch study of 7 hours of detention time were pH, EC, TDS, TSS, TS, COD, phosphate, ammonia, nitrate and DO. Removal efficiency reached 98.32, 97.26 and 84.71% for phosphate, ammonia and COD, respectively, for non-filtered effluents. However, filtered effluent removal efficiency reached 98.53, 98.63 and 89.41% for phosphate, ammonia and COD, respectively. The study revealed that microalgal treatment, if incorporated in conventional wasteater treatment, can be a solution to the limitations of the activated sludge process. It could be a promising technique for low income and developing countries, which could efficiently reduce the effluent concentration to much lesser than the desirable limits in an eco-friendly and cost-effective way. Statement of novelty Municipal wastewater treatment in most developing countries is confined to aerobic secondary treatments, which are costly and are not efficient in removing nutrients from the treated effluents before discharging and leading to the imbalance and eutrophication in the receiving bodies. Hence in this study, an attempt was made to study the effectiveness of Chlorella vulgaris for wastewater treatment at a detention time of 7 hours without any external aeration. The present study revealed that microalgae have efficiently removed organics and nutrients to much lesser than the desirable limit. Thus, if the Chlorella vulgaris is introduced in the wastewater treatment system can reduce the nutrients and organics concentrations without the need for aeration, which can be an energy-saving and cost-effective approach.

Phytoremediation of samples extracted from wastewater treatment plant and their socioeconomic impact

The physico-chemical and bacteriological quality was evaluated in wastewater samples before and after treatment by microalgae enrichment. Three types of wastewater samples - raw water, inlet water and outlet water - were taken directly from the wastewater treatment plant and subjected to microalgae enrichment culture during two months. The main objective of this work was to apply a phytoremediation process based on the use of compulsory microalgae treatment of wastewater from treatment plants compared to other secondary treatments. The biomass of microalgae was extracted to determine the concentrations of phenolic compounds, sugars and especially lipids, which can be subsequently transformed into biodiesel. As a result, the pH showed a significant increase after microalgae proliferation, with values ranging from 9.94 to 10.36. Bacterial community analysis before and after microalgae culture showed a clear shift in biomass content. The total coliform (TC) and the fecal coliform (FC) contents decreased after microalgae enrichment. In addition, the fecal streptococci (FS) and Pseudomonas present in the different wastewater samples completely disappeared after treatment. The applied phytoremediation process showed a drop until the disappearance of the contagious microbes - which present a very serious health risk - due to the release of the quinic acid. The quinic acid observed in the treated waters exceeded the content of 464.328 mg/L. This phenolic compound naturally produced during the process demonstrated a very effective antimicrobial power. However, a significant increment of 100% of phenol compound removal was observed after microalgae enrichment. The lipid content in the various studied samples appeared after microalgae culture. In addition, the heavy metals, namely cadmium and chromium, were completely eliminated after the treatment. Several socioeconomic advantages can be achieved by the use of this process, notably the environmental advantages of bioenergetics and economic and social benefits of the non-expensive valorization of wastewaters for irrigation.

Multi-Objective Optimization of an Integrated Algal and Sludge-Based Bioenergy Park and Wastewater Treatment System

Given increasing energy demand and global warming potential, the advancements in bioenergy production have become a key factor in combating these issues. Biorefineries have been effective in converting biomass into energy and valuable products with the added benefits of treating wastewater used as a cultivation medium. Recent developments enable relationships between sewage sludge and microalgae that could lead to higher biomass and energy yields. This study proposes a multi-objective optimization model that would assist stakeholders in designing an integrated system consisting of wastewater treatment systems, an algal-based bioenergy park, and a sludge-based bioenergy park that would decide which processes to use in treating wastewater and sludge while minimizing cost and carbon emissions. The baseline run of the model showed that the three plants were utilized in treating both sludge and water for the optimal answer. Running the model with no storage prioritizes water disposal, while having storage can help produce more energy. Sensitivity analysis was performed on storage costs and demand. Results show that decreasing the demand is directly proportional to the total costs while increasing it can help reduce expected costs through storage and utilizing process capacities. Costs of storage do not cause a huge overall difference in costs and directly follow the change.

Toxicity, Bioaccumulation and Biotransformation of Glucose-Capped Silver Nanoparticles in Green Microalgae Chlorella vulgaris

Silver nanoparticles (AgNPs) are one of the most widely used nanomaterials in consumer products. When discharged into the aquatic environment AgNPs can cause toxicity to aquatic biota, through mechanisms that are still under debate, thus rendering the nanoparticles (NPs) effects evaluation a necessary step. Different aquatic organism models, i.e., microalgae, mussels, Daphnia magna, sea urchins and Danio rerio, etc. have been largely exploited for NPs toxicity assessment. On the other hand, alternative biological microorganisms abundantly present in nature, i.e., microalgae, are nowadays exploited as a potential sink for removal of toxic substances from the environment. Indeed, the green microalgae Chlorella vulgaris is one of the most used microorganisms for waste treatment. With the aim to verify the possible involvement of C. vulgaris not only as a model microorganism of NPs toxicity but also for the protection toward NPs pollution, we used these microalgae to measure the AgNPs biotoxicity and bioaccumulation. In particular, to exclude any toxicity derived by Ag⁺ ions release, green chemistry-synthesised and glucose-coated AgNPs (AgNPs-G) were used. C. vulgaris actively internalised AgNPs-G whose amount increases in a time- and dose-dependent manner. The internalised NPs, found inside large vacuoles, were not released back into the medium, even after 1 week, and did not undergo biotransformation since AgNPs-G maintained their crystalline nature. Biotoxicity of AgNPs-G causes an exposure time and AgNPs-G dose-dependent growth reduction and a decrease in chlorophyll-a amount. These results confirm C. vulgaris as a bioaccumulating microalgae for possible use in environmental protection.

Salinization and wastewater effects on the growth and some cell contents of Scenedesmus bijugatus

The aim of this study is to determine the effect of salinization and wastewater stresses on the growth, some cellular contents (total soluble proteins, total soluble carbohydrates, nucleic acids, and amino acids composition) and ultrastructure using TEM of unicellular green alga Scenedesmus bijugatus. Treatment of S. bijugatus by NaCl at 10 and 50 mg L-1 significantly increased the growth of this alga and its cellular macro-molecules. While, treatment above this concentration with NaCl significantly inhibited the growth and cellular macro-molecules. On the other hand, treatment by NaCl at the pre-lethal concentration (300 mg L-1) had different effects on its detected amino acids. Whereas, Asp. Acid, Pro, Cys, Val, Iso-leu, leu, Phe.ala and Lys were slightly stimulated with salinization treatment. On contrast the levels of amino acids: Thr, Ser, Glu.acid, Gly, Ala, Mth, His and Arg were markedly inhibited. Ultrastructure examination of treated S. bijugatus by 300 mg L-1 of NaCl for 8 days showed increase of starch granules, shrinkage of cell contents and thickening of cell wall. The recorded data indicated also that treatment by wastewater with all concentrations led to stimulatory effects on their growth and cellular macro-molecules except at 100% wastewater which had inhibitory effects on Asp., Gly., Thr., Ser., Pro., Glu., Ala., Meth., and Cyst., of S. bijugatus. Also, wastewater induced a slight change in the treated S. bijugatus as elevation in starch granules and presence of thylakoid membranes although not clear as in the control.