Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Smartphone-enabled colorimetric immunoassay for deoxynivalenol based on Mn2+-mediated aggregation of AuNPs

Deoxynivalenol (DON) is a common mycotoxin in food that mainly pollutes grain crops and feeds, such as barley, wheat and corn. DON has caused widespread concern in the field of food and feed safety. In this study, a colorimetric immunoassay was proposed based on the aggregation of gold nanoparticles (AuNPs) due to the decomposition of Mn2+ from gold-coated manganese dioxide (AuNP@MnO2) nanosheets. In this study, 2-(dihydrogen phosphate)-l-ascorbic acid (AAP) was hydrolyzed by alkaline phosphatase (ALP) and converted to ascorbic acid (AA). Then, AuNP@MnO2 was reduced to Mn2+ and AuNPs aggregation occurred. Using the unique optical characteristics of AuNPs and AuNP@MnO2, visible color changes realized simple detection of DON with high sensitivity and portability. With increasing DON content, the color changed more obviously. To quantitatively detect DON, pictures can be taken and the blue value can be read by a smartphone. The detection limit (Ic10) of this method was 0.098 ng mL-1, which was 326 times higher than that of traditional competitive ELISA, and the detection range was 0.177-6.073 ng mL-1. This method exhibited high specificity with no cross-reaction in other structural analogs. The average recovery rate of DON in corn flour samples was 89.1 %-110.2 %, demonstrating the high accuracy and stability of this assay in actual sample detection. Therefore, the colorimetric immunoassay can be used for DON-related food safety monitoring.

Rapid and practical colorimetric biosensor for leishmaniasis diseases

In this article, a colorimetric biosensor for detection of Leishmania major surface protease (Gp63) antibody (anti-gp63) was developed by using gold nanoparticle (AuNP) as a color reagent. The dispersion or aggregation of AuNPs leads to a distinct and sensitive change in UV-vis spectra and solution color. For this purpose, kinetoplastid membrane protein-11 (KMP-11) was labeled with AuNPs surface directly. After that, Gp63 antibody was added in the KMP-11@AuNP solution and a color change from red/pink to purple/violet was observed. As a result, anti-gp63 solution diluted at a ratio of 1:640 can be detected with the developed colorimetric leishmania biosensor. The relative standard deviation value for 1:320 diluted anti-gp63 was calculated as 1.29 %. Furthermore, the linear range of the developed colorimetric biosensor was determined as 1:80 to 1:640. Moreover, developed Leishmania biosensor was applied for detection of leishmania parasite crude antigen and rabbit serum which were used as positive and negative samples respectively. As a result, the recovery values for the measurements of aforementioned samples were calculated as 95.3 % ± 0.02, 103.1 % ± 0.02, 96.2 % ± 0.01 and 95.5 % ± 0.03 for dilutions of 1:200, 1:160, 1:320 and 1:640 anti-gp63 solutions respectively.

The multifaceted role of proteases and modern analytical methods for investigation of their catalytic activity

We discuss the diverse functions of proteases in the context of their biotechnological and medical significance, as well as analytical approaches used to determine the functional activity of these enzymes. An insight into modern approaches to studying the kinetics and specificity of proteases, based on spectral (absorption, fluorescence), mass spectrometric, immunological, calorimetric, and electrochemical methods of analysis is given. We also examine in detail electrochemical systems for determining the activity and specificity of proteases. Particular attention is given to exploring innovative electrochemical systems based on the detection of the electrochemical oxidation signal of amino acid residues, thereby eliminating the need for extra redox labels in the process of peptide synthesis. In the review, we highlight the main prospects for the further development of electrochemical systems for the study of biotechnologically and medically significant proteases, which will enable the miniaturization of the analytical process for determining the catalytic activity of these enzymes.

Formation of plasmonic core/shell nanorods through ammonia-mediated dissolution of silver(i)oxide for ammonia monitoring

Due to the expansion of the aquaculture industry in the world and the importance of controlling ammonia in fish breeding water, high levels of which impose significant damage to fish farming, it is crucial to develop affordable, rapid, and on-site methods for timely and accurate detection of ammonia. In this study, a colorimetric sensor based on the formation of gold/silver core/shell nanorods (NRs) was developed for the rapid detection of ammonia. The sensor functioned by the specific dissolution of silver(i) oxide by ammonia, which triggered the activation of silver ions and the subsequent formation of gold/silver core/shell NRs in the presence of a reducing agent (i.e., ascorbic acid (AA)). This led to changes in the surface composition, size, and aspect ratio of the NRs, which was accompanied by a vivid color change from green to red/orange in less than a minute. The colorimetric sensor was optimized by adjusting the effective parameters, including ascorbic acid, silver ion, and sodium hydroxide concentration as well as pH and reaction time. After the optimization process, the sensor was found to have a linear range from 50 to 800 μmol L-1 (0.85-13.6 ppm). In addition, the application of the sensor was validated by measuring the ammonia content in water samples from rearing ponds for rainbow trout, sturgeon, and tilapia before and after feeding. The sensor's label-free, rapid, user-friendly, naked-eye, and cost-effective operation makes it an attractive option for on-site environmental monitoring of ammonia.

Laser-printed paper ELISA and hydroxyapatite immobilization for colorimetric congenital anomalies screening in saliva

BACKGROUND

Alpha-fetoprotein (AFP) is a fetal protein that can indicate congenital anomalies such as Down syndrome and spinal canal blockage when detected at abnormal levels in pregnant women. Current AFP detection methods rely on invasive blood or serum samples, which require sophisticated equipment. From the many solutions proposed, colorimetric paper-based assays excel in point-of-care settings. The concept of paper-based ELISA (p-ELISA) enhances traditional methods, aligning with the ASSURED criteria for diagnostics in resource-limited regions. Despite success in microfluidic paper-based assay devices, laser printing remains underexplored for p-ELISA. Additionally, modifying the paper surface provides an additional layer of sensitivity enhancement.

RESULTS

In this study, we developed a novel laser-printed paper-based ELISA (LP-pELISA) for rapid, sensitive, and noninvasive detection of AFP in saliva samples. The LP-pELISA platform was fabricated by printing hydrophobic barriers on filter paper using a laser printer, followed by depositing hydroxyapatite (HAp) as an immobilization material for the antibodies. The colorimetric detection was achieved using AuNPs functionalized with anti-AFP antibodies and silver nitrate enhancement. The LP-pELISA exhibited a linear response for AFP detection in both buffer and saliva samples over a range of 1.0-800 ng mL-1, with a limit of detection (LOD) reaching 1.0 ng mL-1. The assay also demonstrated good selectivity, repeatability, reproducibility, and stability. The LP-pELISA was further validated by testing spiked human saliva samples, showing its potential for point-of-care diagnosis of congenital disabilities.

SIGNIFICANCE

The LP-pELISA is a noninvasive platform showcasing simplicity, cost-effectiveness, and user-friendliness, utilizing laser printing, hydroxyapatite modification, and saliva samples to efficiently detect AFP. Beyond its application for AFP, this method's versatility extends to other biomarkers, positioning it as a catalyst for the evolution of paper-based biosensors. The LP-pELISA holds promise as a transformative tool for point-of-care diagnostics, fostering advancements in healthcare with its innovative technology.

Efficient production of uniform gold nanoparticles via a streamlined low-cost, semi-automated, open-source platform

In the quest to discover dependable and repeatable methods for producing noble metal nanospheres, both commercial and academic scientists have shown great interest. The challenge of precisely controlling the size of these nanospheres is critical, as variations can alter their optical characteristics, leading to complications in subsequent applications. In this context, we present the design and validation of an affordable, semi-automated device that synthesizes gold nanoparticles using the Turkevich method. This device, named 'NanoSynth Mini' and powered by Raspberry Pi, demonstrates the capability to generate gold nanoparticles with diameters ranging from 15 to 60 nanometers with minimal variability. Its design allows for seamless integration into lab processes, providing consistent support for extensive research initiatives.

Turn-off enzyme activity of histidine-rich peptides for the detection of lysozyme

An assay that integrates histidine-rich peptides (HisRPs) with high-affinity aptamers was developed enabling the specific and sensitive determination of the target lysozyme. The enzyme-like activity of HisRP is inhibited by its interaction with a target recognized by an aptamer. In the presence of the target, lysozyme molecules progressively assemble on the surface of HisRP in a concentration-dependent manner, resulting in the gradual suppression of enzyme-like activity. This inhibition of HisRP's enzyme-like activity can be visually observed through color changes in the reaction product or quantified using UV-visible absorption spectroscopy. Under optimal conditions, the proposed colorimetric assay for lysozyme had a detection limit as low as 1 nM and exhibited excellent selectivity against other nonspecific interferents. Furthermore, subsequent research validated the practical applicability of the developed colorimetric approach to saliva samples, indicating that the assay holds significant potential for the detection of lysozymes in samples derived from humans.

Dopamine-Functionalized Gold Nanoparticles for Colorimetric Detection of Histamine

Histamine, a primary biogenic amine (BA) generated through the decarboxylation of amino acids, concentration increases in protein-rich foods during deterioration. Thus, its detection plays a crucial role in ensuring food safety and quality. This study introduces an innovative approach involving the direct integration of dopamine onto gold nanoparticles (DCt-AuNP), aiming at rapid histamine colorimetric detection. Transmission electron microscopy revealed the aggregation of uniformly distributed spherical DCt-AuNPs with 12.02 ± 2.53 nm sizes upon the addition of histamine to DCt-AuNP solution. The Fourier-transform infrared (FTIR) spectra demonstrated the disappearance of the dicarboxy acetone peak at 1710 cm-1 along with the formation of well-defined peaks at 1585 cm-1, and 1396 cm-1 associated with the N-H bending modes and the aromatic C=C bond stretching vibration in histamine molecule, respectively, confirming the ligand exchange and interactions of histamine on the surface of DCt-AuNPs. The UV-vis spectra of the DCt-AuNP solution exhibited a red shift and a reduction in surface plasmon resonance (SPR) peak intensity at 518 nm along with the emergence of the 650 nm peak, signifying aggregation DCt-AuNPs with increasing histamine concentration. Notably, color transitions from wine-red to deep blue were observed in the DCt-AuNP solution in response to histamine, providing a reliable colorimetric signal. Dynamic Light Scattering (DLS) characterization showed a significant increase in the hydrodynamic diameter, from ∼15 to ∼1690 nm, confirming the interparticle cross-linking of DCt-AuNPs in the presence of histamine. This newly developed DCt-AuNP sensor provides colorimetric results in less than a minute that exhibits a remarkable naked-eye histamine detection threshold of 1.57 μM and a calculated detection limit of 0.426 μM, making it a promising tool for the rapid and sensitive detection of histamine.

Biomolecular Corona of Gold Nanoparticles: The Urgent Need for Strong Roots to Grow Strong Branches

Gold nanoparticles (GNPs) are largely employed in diagnostics/biosensors and are among the most investigated nanomaterials in biology/medicine. However, few GNP-based nanoformulations have received FDA approval to date, and promising in vitro studies have failed to translate to in vivo efficacy. One key factor is that biological fluids contain high concentrations of proteins, lipids, sugars, and metabolites, which can adsorb/interact with the GNP's surface, forming a layer called biomolecular corona (BMC). The BMC can mask prepared functionalities and target moieties, creating new surface chemistry and determining GNPs' biological fate. Here, the current knowledge is summarized on GNP-BMCs, analyzing the factors driving these interactions and the biological consequences. A partial fingerprint of GNP-BMC analyzing common patterns of composition in the literature is extrapolated. However, a red flag is also risen concerning the current lack of data availability and regulated form of knowledge on BMC. Nanomedicine is still in its infancy, and relying on recently developed analytical and informatic tools offers an unprecedented opportunity to make a leap forward. However, a restart through robust shared protocols and data sharing is necessary to obtain "stronger roots". This will create a path to exploiting BMC for human benefit, promoting the clinical translation of biomedical nanotools.

Facile Synthesis of PEGylated Gold Nanoparticles for Enhanced Colorimetric Detection of Histamine

Histamine is among the biogenic amines that are formed during the microbial decarboxylation of amino acids in various food products, posing a significant threat to both food safety and human health. Herein, we present a one-step synthesis of PEGylated gold nanoparticles (PEG-AuNPs) for rapid, simple, and cost-effective colorimetric histamine detection. PEG-AuNPs' surface plasmon resonance (SPR) range at 520-530 nm with a hydrodynamic size distribution of 20-40 nm. Fourier transform infrared (FT-IR) spectra confirmed the reduction of AuNPs at 1645 cm-1 along with the other observed peaks at 2870, 1350, and 1100 cm-1 as a strong evidence for the presence of PEG. Upon the addition of histamine to the PEG-AuNP solution, transmission electron microscopy (TEM) highlighted the aggregation of nanoparticles. In addition, red shifting and a decrease in the absorbance of the SPR peak along with the appearance of an additional peak at ∼690 nm was observed in the PEG-AuNP absorption spectra in the presence of histamine. Increasing the PEG concentration in the gold colloids leads to the formation of a protective barrier around the surface of nanoparticles, which influences the colloidal stability by impeding the aggregation of PEG-AuNPs upon histamine addition. The minimum colorimetric response of PEG-AuNPs to histamine concentration is 30 ppm, as assessed by the naked eye. The absorption ratio (A690/A526) showed a linear dynamic range from 20 to 100 ppm with a limit of detection of 9.357 μM. Additionally, the assay demonstrates a commendable selectivity toward histamine analyte.

Nanomaterials in electrochemical nanobiosensors of miRNAs

Nanomaterial-based biosensors have received significant attention owing to their unique properties, especially enhanced sensitivity. Recent advancements in biomedical diagnosis have highlighted the role of microRNAs (miRNAs) as sensitive prognostic and diagnostic biomarkers for various diseases. Current diagnostics methods, however, need further improvements with regards to their sensitivity, mainly due to the low concentration levels of miRNAs in the body. The low limit of detection of nanomaterial-based biosensors has turned them into powerful tools for detecting and quantifying these biomarkers. Herein, we assemble an overview of recent developments in the application of different nanomaterials and nanostructures as miRNA electrochemical biosensing platforms, along with their pros and cons. The techniques are categorized based on the nanomaterial used.

Ultra-rapid and highly selective colorimetric detection of hydrochloric acid via an aggregation to dispersion change of gold nanoparticles

A rapid and highly selective naked-eye detection of hydrochloric acid (HCl) in an aqueous medium was established using HCl-triggered redispersion of gold nanoparticle aggregates.

Aptamer-Based fluorescent DNA biosensor in antibiotics detection

The inappropriate employment of antibiotics across diverse industries has engendered profound apprehensions concerning their cumulative presence within human bodies and food commodities. Consequently, many nations have instituted stringent measures limiting the admissible quantities of antibiotics in food items. Nonetheless, conventional techniques employed for antibiotic detection prove protracted and laborious, prompting a dire necessity for facile, expeditious, and uncomplicated detection methodologies. In this regard, aptamer-based fluorescent DNA biosensors (AFBs) have emerged as a sanguine panacea to surmount the limitations of traditional detection modalities. These ingenious biosensors harness the binding prowess of aptamers, singular strands of DNA/RNA, to selectively adhere to specific target antibiotics. Notably, the AFBs demonstrate unparalleled selectivity, affinity, and sensitivity in detecting antibiotics. This comprehensive review meticulously expounds upon the strides achieved in AFBs for antibiotic detection, particularly emphasizing the labeling modality and the innovative free-label approach. It also elucidates the design principles behind a diverse array of AFBs. Additionally, a succinct survey of signal amplification strategies deployed within these biosensors is provided. The central objective of this review is to apprise researchers from diverse disciplines of the contemporary trends in AFBs for antibiotic detection. By doing so, it aspires to instigate a concerted endeavor toward the development of heightened sensitivity and pioneering AFBs, thereby contributing to the perpetual advancement of antibiotic detection methodologies.

Smartphone-assisted quantitative colorimetric identification of thrombin based on peroxidase mimetic features of fibrinogen-gold nanozymes

Fibrinogen-modified gold nanoparticles (Fib-AuNPs) and 3,3',5,5'-tetramethylbenzidine (TMB) substrate besides hydrogen peroxide (H2O2) were applied for assessment of the biomarker thrombin. Fib-AuNPs have catalytic active sites for the oxidation of TMB besides H2O2 and cause the color change of the substrate. Moreover, they can lead to the enhancement in the absorption wavelengths of 650 and 370 nm. By the addition of thrombin to Fib-AuNPs, fibrinogen turns into fibrin, and AuNPs are surrounded by fibrin. Therefore, their active catalytic sites for the oxidation of TMB besides H2O2 are covered by fibrin and cannot cause color change and absorption increase as before. The relationship between the average variations of the color intensity and changes in the absorption wavelengths at 650 and 350 nm with different concentrations of bovine thrombin added to Fib-AuNPs was studied. In such manner, three sensitive colorimetric approaches have been developed for the identification of bovine thrombin with the linear range of 20-120 pM and the limit of detection (LOD) of 17.54 pM for the average color intensity (G + B), the linear range of 20-120 pM and the LOD of 13.41 pM for the absorption peak at 650 nm, and the linear range of 40-140 pM with the LOD of 18.85 pM for absorption peak at 370 nm. The practical application of this biosensing platform was indicated through the successful determination of bovine thrombin in bovine serum. The satisfactory RSD ( < 10%) and recovery values (99.11-107.61%) confirmed the feasibility of the fabricated sensor.

Nanoparticle-Based Bioaffinity Assays: From the Research Laboratory to the Market

Advances in the development of new biorecognition elements, nanoparticle-based labels as well as instrumentation have inspired the design of new bioaffinity assays. This review critically discusses the potential of nanoparticles to replace current enzymatic or molecular labels in immunoassays and other bioaffinity assays. Successful implementations of nanoparticles in commercial assays and the need for rapid tests incorporating nanoparticles in different roles such as capture support, signal generation elements, and signal amplification systems are highlighted. The limited number of nanoparticles applied in current commercial assays can be explained by challenges associated with the analysis of real samples (e.g., blood, urine, or nasal swabs) that are difficult to resolve, particularly if the same performance can be achieved more easily by conventional labels. Lateral flow assays that are based on the visual detection of the red-colored line formed by colloidal gold are a notable exception, exemplified by SARS-CoV-2 rapid antigen tests that have moved from initial laboratory testing to widespread market adaption in less than two years.

Micro-interdigitated electrodes genosensor based on Au-deposited nanoparticles for early detection of cervical cancer

Genosensor-based electrodes mediated with nanoparticles (NPs) have tremendously developed in medical diagnosis. Herein, we report a facile, rapid, low cost and highly sensitive biosensing strategy for early detection of HPV 18 using gold-nanoparticles (AuNPs) deposited on micro-IDEs. This study represents surface charge transduction of micro-interdigitated electrodes (micro-IDE) alumina insulated with silica, independent and mini genosensor modified with colloidal gold NPs (AuNPs), and determination of gene hybridization for early detection of cervical cancer. The surface of AuNPs deposited micro-IDE functionalized with optimized 3-aminopropyl-triethoxysilane (APTES) followed by hybridization with deoxyribonucleic acid (DNA) virus to develop DNA genosensor. The results of ssDNA hybridization with the ssDNA target of human papillomavirus (HPV) 18 have affirmed that micro-IDE functionalized with colloidal AuNPs resulted in the lowest detection at 0.529 aM. Based on coefficient regression, micro-IDE functionalized with AuNPs produces better results in the sensitivity test (R2 = 0.99793) than unfunctionalized micro-IDE.

Novel Microsynthesis of High-Yield Gold Nanoparticles to Accelerate Research in Biosensing and Other Bioapplications

Gold nanoparticles (AuNPs) exhibit unique properties that make them appealing for applications in biosensing and other emerging fields. Despite the availability of numerous synthesis methods, important questions remain to be addressed regarding the volume effect on the synthesis yield and quality of AuNPs in the light of biosensing research. The present study addresses these issues by developing a novel microvolumetric citrate-reduction method to improve the synthesis of AuNPs, which were characterized by electronic microscopy, energy dispersive spectroscopy, zeta potential and colorimetric analysis. A comparison of the novel microsynthesis method with the standard Turkevich method demonstrated its superior performance in terms of yield, monodispersity, rapidity (in one step), reproducibility, and stability. The analytical behavior of AuNPs-based aptasensors prepared by microsynthesis was investigated using kanamycin detection and showed higher reproducibility and improved detection limits (3.4 times) compared to those of Turkevich AuNPs. Finally, the effect of pH was studied to demonstrate the suitability of the method for the screening of AuNP synthesis parameters that are of direct interest in biosensing research; the results showed an optimal pH range between 5.0 and 5.5. In summary, the approach described herein has the potential to improve research capabilities in biosensing, with the added benefits of lowering costs and minimizing waste generation in line with current trends in green nanotechnology.

Colorimetric sensor based on biogenic nanomaterials for high sensitive detection of hydrogen peroxide and multi-metals

Hydrogen peroxide (H2O2) and heavy metals, which are among the wastes of the industrial sector, become a threat to living things and the environment above certain concentrations. Therefore, the detection of both H2O2 and heavy metals with simple, low-cost, and fast analytical methods has gained great importance. The use of nanoparticles in colorimetric sensor technology for the detection of these analytes provides great advantages. In recent years, green synthesis of nanomaterials with products that can be considered biowaste is among the popular topics. In this study, silver/silver chloride nanoparticles (Ag@AgCl NPs) were synthesized using the green synthesis method as an eco-friendly and cheap method, the green algae extract was used as a reducing agent. The characterization of Ag@AgCl nanoparticles and green algae extract was carried out with several techniques such as Transmission Electron Microscopy (TEM), UV-Visible spectrometry (UV-Vis), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction patterns (XRD) methods were used for characterization. According to TEM analysis, the Ag@AgCl NPs typically spherical in form and range in size from 4 to 10 nm, and UV-vis showed the formation of surface plasmon resonance (SPR) of the Ag@AgCl between 400 and 450 nm. In addition, its activity as a colorimetric sensor for hydrogen peroxide (H2O2) and multi-metal detection was evaluated. Interestingly, Ag/AgCl NPs caused different color formations for 3 metals simultaneously in the sensor study for heavy metal detection, and Fe3+, Cu2+, and Cr6+ ions were detected. The R2 values for H2O2, Fe3+, Cu2+, and Cr6+ were 0.9360, 0.9961, 0.9787, and 0.9625 the limit of detection (LOD) was 43.75, 1.69, 3.18, and 5.05 ppb (ng/mL), respectively. It was determined that Ag@AgCl NPs have the potential to be used as a colorimetric sensor for the detection of H2O2 and heavy metals from wastewater.

Gold Nanoparticle-Based Colorimetric Sensors: Properties and Application in Detection of Heavy Metals and Biological Molecules

During the last decade, advances have been made in nanotechnology using nanomaterials, leading to improvements in their performance. Gold nanoparticles (AuNPs) have been widely used in the field of sensor analysis and are also combined with certain materials to obtain the desired characteristics. AuNPs are commonly used as colorimetric sensors in detection methods. In developing an ideal sensor, there are certain characteristics that must be met such as selectivity, sensitivity, accuracy, precision, and linearity, among others. Various methods for the synthesis of AuNPs and conjugation with other components have been carried out in order to obtain good characteristics for their application. AuNPs can be applied in the detection of both heavy metals and biological molecules. This review aimed at observing the role of AuNPs in its application. The synthesis of AuNPs for sensors will also be revealed, along with their characteristics suitable for this role. In the application method, the size and shape of the particles must be considered. AuNPs used in heavy metal detection have a particle size of around 15-50 nm; in the detection of biological molecules, the particle size of AuNPs used is 6-35 nm whereas in pharmaceutical compounds for cancer treatment and the detection of other drugs, the particle size used is 12-30 nm. The particle sizes did not correlate with the type of molecules regardless of whether it was a heavy metal, biological molecule, or pharmaceutical compound but depended on the properties of the molecule itself. In general, the best morphology for application in the detection process is a spherical shape to obtain good sensitivity and selectivity based on previous studies. Functionalization of AuNPs with conjugates/receptors can be carried out to increase the stability, sensitivity, selectivity, solubility, and plays a role in detecting biological compounds through conjugating AuNPs with biological molecules.

Theoretical study of the binding mechanism between anticancerous drug mercaptopurine and gold nanoparticles using a cluster model

CONTEXT

Mercaptopurine is an effective anticancer medicine yet known with serious adverse reactions, thus requiring further attempts to enhance its biological targeting. Small gold clusters Aun (n = 2-10) were used as model reactants to simulate the surface of gold nanoparticles. The computed results show that the drug molecules tend to anchor on the gold clusters at the S atom with the associated binding energies varying from -50 to -34 kcal mol-1 (in vacuum) and from -42 to -28 kcal mol-1 (in aqueous solution). Furthermore, the adsorption of the drug onto the gold surface is considered as a reversible process, and the mechanism of drug releasing was found to be triggerable by internal factors, such as a pH change or the concentrated presence of thiol amino acids in cancerous protein structures.

METHOD

Calculations based on density functional theory (DFT) were performed to probe the nature of interactions between the drug and gold nanoparticles. Structural features, thermodynamic parameters, bonding characteristics, and electronic properties of the resulting complexes were investigated at the PBE//cc-pVTZ/cc-pVDZ-PP level.

A smartphone-based gold nanoparticle colorimetric sensing platform for kanamycin detection in food samples

The misuse of kanamycin in the breeding industry can pose a threat to human health through food exposure. Therefore, it is crucial to monitor kanamycin (Kana) levels in food. This study presents a novel colorimetric approach for detecting kanamycin based on the aggregation of gold nanoparticles (AuNPs) induced by kanamycin. To achieve this, a single-stranded DNA (ssDNA) aptamer was employed to bind the surface of AuNPs and maintain their dispersion under high salt concentrations. Upon adding Kana, the aptamer selectively binds to it and separates from the gold surface, resulting in the aggregation of AuNPs. This leads to a color change in the solution (from red to purple to blue) which can be observed under salt conditions. The proposed sensor demonstrated a linear range of 0.5-3 nM and a limit of detection (LOD) of 0.11 nM under optimal conditions. Its practicability was tested by monitoring kanamycin in six food samples, including milk, honey, vitamin C effervescent tablets, vegetable, and meat with satisfactory spiked recoveries. The sensor's miniaturization, convenience, simplicity, and low cost make it a desirable choice for fast and highly sensitive detection of Kana.

Magnetic Molecularly Imprinted Chitosan Combined with a Paper-Based Analytical Device for the Smartphone Discrimination of Tryptophan Enantiomers

The separation of enantiomers plays a critical role in pharmaceutical development, ensuring therapeutic efficacy, safety, and patent protection. It enables the production of enantiopure drugs and enhances our understanding of the properties of chiral compounds. In this study, a straightforward and effective chiral detection strategy was developed for distinguishing between tryptophan (TRP) enantiomers. The approach involved the preparation of a magnetic molecularly imprinted chitosan (MMIC) for preparation of the sample, which was combined with a nitrocellulose membrane (a paper-based analytical device, PAD) integrated with D-TRP covalently grafted with polymethacrylic acid (PAD-PMA_D-TRP). Discriminating between the TRP enantiomers was achieved using AuNPs as a colorimetric probe. Indeed, the presence of D-TRP rapidly induced the aggregation of AuNPs due to its strong affinity to PAD-PMA_D-TRP, resulting in a noticeable change in the color of the AuNPs from red to purple. On the other hand, L-TRP did not induce any color changes. The chiral analysis could be easily performed with the naked eye and/or a smartphone. The developed method exhibited a detection limit of 3.3 µM, and it was successfully applied to detect TRP in serum samples, demonstrating good recovery rates. The proposed procedure is characterized by its simplicity, cost-effectiveness, rapidity, and ease of operation.

Scope of Onsite, Portable Prevention Diagnostic Strategies for Alternaria Infections in Medicinal Plants

Medicinal plants are constantly challenged by different biotic inconveniences, which not only cause yield and economic losses but also affect the quality of products derived from them. Among them, Alternaria pathogens are one of the harmful fungal pathogens in medicinal plants across the globe. Therefore, a fast and accurate detection method in the early stage is needed to avoid significant economic losses. Although traditional methods are available to detect Alternaria, they are more time-consuming and costly and need good expertise. Nevertheless, numerous biochemical- and molecular-based techniques are available for the detection of plant diseases, but their efficacy is constrained by differences in their accuracy, specificity, sensitivity, dependability, and speed in addition to being unsuitable for direct on-field studies. Considering the effect of Alternaria on medicinal plants, the development of novel and early detection measures is required to detect causal Alternaria species accurately, sensitively, and rapidly that can be further applied in fields to speed up the advancement process in detection strategies. In this regard, nanotechnology can be employed to develop portable biosensors suitable for early and correct pathogenic disease detection on the field. It also provides an efficient future scope to convert innovative nanoparticle-derived fabricated biomolecules and biosensor approaches in the diagnostics of disease-causing pathogens in important medicinal plants. In this review, we summarize the traditional methods, including immunological and molecular methods, utilized in plant-disease diagnostics. We also brief advanced automobile and efficient sensing technologies for diagnostics. Here we are proposing an idea with a focus on the development of electrochemical and/or colorimetric properties-based nano-biosensors that could be useful in the early detection of Alternaria and other plant pathogens in important medicinal plants. In addition, we discuss challenges faced during the fabrication of biosensors and new capabilities of the technology that provide information regarding disease management strategies.

Plasmonic nanoparticle's anti-aggregation application in sensor development for water and wastewater analysis

Colorimetric sensors have emerged as a powerful tool in the detection of water pollutants. Plasmonic nanoparticles use localized surface plasmon resonance (LSPR)-based colorimetric sensing. LSPR-based sensing can be accomplished through different strategies such as etching, growth, aggregation, and anti-aggregation. Based on these strategies, various sensors have been developed. This review focuses on the newly developed anti-aggregation-based strategy of plasmonic nanoparticles. Sensors based on this strategy have attracted increasing interest because of their exciting properties of high sensitivity, selectivity, and applicability. This review highlights LSPR-based anti-aggregation sensors, their classification, and role of plasmonic nanoparticles in these sensors for the detection of water pollutants. The anti-aggregation based sensing of major water pollutants such as heavy metal ions, anions, and small organic molecules has been summarized herein. This review also provides some personal insights into current challenges associated with anti-aggregation strategy of LSPR-based colorimetric sensors and proposes future research directions.

Recent advances in fluorescent materials for mercury(ii) ion detection

Invading mercury would cause many serious health hazards such as kidney damage, genetic freak, and nerve injury to human body. Thus, developing highly efficient and convenient mercury detection methods is of great significance for environmental governance and protection of public health. Motivated by this problem, various testing technologies for detecting trace mercury in the environment, food, medicines or daily chemicals have been developed. Among them, the fluorescence sensing technology is a sensitive and efficient detection method for detecting Hg2+ ions due to its simple operation, rapid response and economic value. This review aims to discuss the recent advances in fluorescent materials for Hg2+ ion detection. We reviewed the Hg2+ sensing materials and divided them into seven categories according to the sensing mechanism: static quenching, photoinduced electron transfer, intramolecular charge transfer, aggregation-induced emission, metallophilic interaction, mercury-induced reactions and ligand-to-metal energy transfer. The challenges and prospects of fluorescent Hg2+ ion probes are briefly presented. We hope that this review can provide some new insights and guidance for the design and development of novel fluorescent Hg2+ ion probes to promote their applications.

Nucleic acid aptamer-based biosensors and their application in thrombin analysis

Thrombin is a multifunctional serine protease that plays an important role in coagulation and anticoagulation processes. Aptamers have been widely applied in biosensors due to their high specificity, low cost and good biocompatibility. This review summarizes recent advances in thrombin quantification using aptamer-based biosensors. The primary focus is optical sensors and electrochemical sensors, along with their applications in thrombin analysis and disease diagnosis.

Bifunctionalized nanobioprobe based rapid color-shift assay for typhoid targeting Vi capsular polysaccharide

Typhoid fever is an acute illness caused by Salmonella Typhi and the current diagnostic gap leads to inaccurate, over-diagnosis of typhoid leading to excessive use of antibiotics. Herein, to address the challenges we describe a new rapid color-shift assay based on a novel bifunctional nanobioprobe (Vi-AgNP probe) that is functionalized with specific biomarker Vi polysaccharide and also has the co-presence of Ag as urease inhibitor. The immunoreactions between the Vi with specific antibodies (Abs) present in typhoid patient sample forms a shielding barrier over Vi-AgNP probe rendering the urease to be active, generating colored output. Vi polysaccharide coating on the AgNP was visualized using HRTEM. TEM was performed to get insight into shielding barrier formation by the Abs. MST (microscale thermophoresis) data showed less binding Kd of 7.43 μM in presence of Abs whereas probe with urease showed efficient binding with Kd 437 nM. The assay was validated using 53 human sera samples and proven effective with 100% sensitivity. The assay showed relative standard deviation (RSD) of 4.3% estimated using rabbit anti-Vi Abs. The entire procedure could be completed within 15 min. Unlike lateral flow based assays, our assay does not require multiple combination of Abs for detection. The assay format was also found compatible in paper strip test that provides promising opportunities to develop low-cost on-spot assay for clinical diagnostics.

Electrochemical biosensor for trypsin activity assay based on cleavage of immobilized tyrosine-containing peptide

In this work, we proposed a biosensor for trypsin proteolytic activity assay using immobilization of model peptides on screen-printed electrodes (SPE) modified with gold nanoparticles (AuNPs) prepared by electrosynthetic method. Sensing of proteolytic activity was based on electrochemical oxidation of tyrosine residues of peptides. We designed peptides containing N-terminal cysteine residue for immobilization on an SPE, modified with gold nanoparticles, trypsin-specific cleavage site and tyrosine residue as a redox label. The peptides were immobilized on SPE by formation of chemical bonds between mercapto groups of the N-terminal cysteine residues and AuNPs. After the incubation with trypsin, time-dependent cleavage of the immobilized peptides was observed by decline in tyrosine electrochemical oxidation signal. The kinetic parameters of trypsin, such as the catalytic constant (k_cat), the Michaelis constant (K_M) and the catalytic efficiency (k_cat/K_M), toward the CGGGRYR peptide were determined as 0.33 ± 0.01 min^-1, 198 ± 24 nM and 0.0016 min^-1 nM^-1, respectively. Using the developed biosensor, we demonstrated the possibility of analysis of trypsin specificity toward the peptides with amino acid residues disrupting proteolysis. Further, we designed the peptides with proline or glutamic acid residues after the cleavage site (CGGRPYR and CGGREYR), and trypsin had reduced activity toward both of them according to the existing knowledge of the enzyme specificity. The developed biosensor system allows one to perform a comparative analysis of the protease steady-state kinetic parameters and specificity toward model peptides with different amino acid sequences.

Colorimetric Aptasensor for the Visual and Microplate Determination of Clusterin in Human Urine Based on Aggregation Characteristics of Gold Nanoparticles

Clusterin has the potential to become the biomarker of multiple diseases, but its clinical quantitative detection methods are limited, which restricts its research progress as a biomarker. A rapid and visible colorimetric sensor for clusterin detection based on sodium chloride-induced aggregation characteristic of gold nanoparticles (AuNPs) was successfully constructed. Unlike the existing methods based on antigen-antibody recognition reactions, the aptamer of clusterin was used as the sensing recognition element. The aptamer could protect AuNPs from aggregation caused by sodium chloride, but clusterin bound with aptamer detached it from AuNPs, thereby inducing aggregation again. Simultaneously, the color change from red in the dispersed state to purple gray in the aggregated state made it possible to preliminarily judge the concentration of clusterin by observation. This biosensor showed a linear range of 0.02-2 ng/mL and good sensitivity with a detection limit of 5.37 pg/mL. The test results of clusterin in spiked human urine confirmed that the recovery rate was satisfactory. The proposed strategy is helpful for the development of label-free point-of-care testing equipment for clinical testing of clusterin, which is cost-effective and feasible.

A detection method for Prorocentrum minimum by an aptamer-gold nanoparticles based colorimetric assay

Here, to give early waring for harmful algal blooms caused by Prorocentrum minimum, we reported a simple and rapid colorimetric assay that is named aptamer-gold nanoparticles (GNPs) based colorimetric assay (AGBCA). The GNPs maintain a dispersed state and have a strong characteristic absorption peak at 520 nm. With the addition of NaCl, the stability of the solution will be destroyed and the dispersed GNPs will aggregate. Therefore, the characteristic absorption peak of the GNPs solution will change from 520 nm to 670 nm. Aptamers can be adsorbed on the surface of GNPs, effectively preventing the aggregation of GNPs. In the presence of P. minimum, aptamers will specifically bind to P. minimum, causing the dissociation of the aptamers from GNPs. Consequently, the GNPs will aggregate in the NaCl solution, corresponding to a new absorption peak at 670 nm. A linear relationship between the absorbance ratio variation (ΔA₆₇₀/A₅₂₀) and the P. minimum concentration was observed in the concentration range of 1 × 10² - 1 × 10⁷ cells mL^-1, with a low detection limit of 8 cells mL^-1. The developed AGBCA is characterized by simplicity, strong specificity, and high sensitivity and is thus promising for the quantitative detection of P. minimum in natural samples.

Green synthesis, characterization, and biological evaluation of gold and silver nanoparticles using Mentha spicata essential oil

Green synthesis of bioactive nanoparticles (NPs) is getting more attractive in various fields of science including the food industry. This study investigates the green synthesizing and characterization of gold NPs (AuNPs) and silver NPs (AgNPs) produced using Mentha spicata L. (M. spicata) essential oil as well as their antibacterial, antioxidant, and in vitro cytotoxic effects. The essential oil was mixed with both Chloroauric acid (HAuCl₄) and aqueous silver nitrate (AgNO₃) solutions separately and incubated at room temperature for 24 h. The chemical composition of the essential oil was identified by gas chromatography coupled with a mass spectrometer detector (GC-MS). Au and Ag nanoparticles were characterized using UV-Vis spectroscopy, transmission electron microscopy, scanning electron microscopy, dynamic light scattering (DLS), X-ray diffraction (XRD) and Fourier transform infrared (FTIR). The cytotoxicity of both types of nanoparticles was evaluated using MTT assay on cancerous HEPG-2cell line by exposing them to various concentrations of both NPs for 24 h. The antimicrobial effect was evaluated by the well-diffusion technique. The antioxidant effect was determined by DPPH and ABTS tests. According to the results of GC-MS analysis, 18 components were identified, including carvone (78.76%) and limonene (11.50%). UV-visible spectroscopy showed a strong absorption peak of 563 nm and 485 nm, indicating the formation of Au NPs and Ag NPs, respectively. TEM and DLS demonstrated that AuNPs and AgNPs were predominantly spherical shaped with average sizes of 19.61 nm and 24 nm, respectively. FTIR analysis showed that biologically active compounds such as monoterpenes could assist in the formation and stabilization of both types of NPs. Additionally, XRD provided more accurate results, revealing a nano-metal structure. Silver nanoparticles exhibited better antimicrobial activity against the bacteria than AuNPs. Zones of inhibition ranging 9.0-16.0 mm were recorded for the AgNPs, while zones of 8.0-10.33 mm were observed AuNPs. In the ABTS assay, the AuNPs and AgNPs showed a dose-dependent activity and synthesized nanoparticles exhibited higher antioxidant activity than MSEO in both assays. Mentha spicata essential oil can be successfully used for the green production of Au NPs and Ag NPs. Both green synthesized NPs show antibacterial, antioxidant, and in vitro cytotoxic activity.

Identification of Proteins Using Supramolecular Gold Nanoparticle-Dye Sensor Arrays

The rapid detection of proteins is very important in the early diagnosis of diseases. Gold nanoparticles (AuNPs) can be engineered to bind biomolecules efficiently and differentially. Cross-reactive sensor arrays have high sensitivity for sensing proteins using differential interactions between sensor elements and bioanalytes. A new sensor array was fabricated using surface-charged AuNPs with dyes supramolecularly encapsulated into the AuNP monolayer. The fluorescence of dyes is partially quenched by the AuNPs and can be restored or further quenched due to the differential interactions between AuNPs with proteins. This sensing system enables the discrimination of proteins in both buffer and human serum, providing a potential tool for real-world disease diagnostics.

Exploration of the Atomic Pathway of Seed-Mediated Growth from Icosahedral [Au25(SR)18]- to Bi-Icosahedral Au38(SR)24 and Au44(SR)26 Clusters Based on the 2e- Hopping Mechanism

Size growth is ubiquitous in the gold nanocluster synthesis. However, the atomic-level mechanism of seed-mediated growth of gold clusters remains mysterious. In this study, the seed-mediated growth pathway from the icosahedral [Au₂₅(SR)₁₈]^- cluster to the bi-icosahedral Au₃₈(SR)₂₄ and Au₄₄(SR)₂₆ clusters is studied based on the two-electron (2e^-) hopping mechanism. First, atomic structures of three key intermediate clusters, [Au₂₉(SR)₂₀]^-, [Au₃₃(SR)₂₂]^-, and Au₄₁(SR)₂₅, are predicted based on the 2e^--unit decomposition strategy. The theoretically simulated UV-Vis spectra based on the predicted structure model of [Au₂₉(SR)₂₀]^- and [Au₃₃(SR)₂₂]^- matched well with the experimental curves reported previously. Based on the predicted intermediate cluster structures, the size growth pathway from the eight-electron (8e^-) [Au₂₅(SR)₁₈]^- cluster to 14-electron (14e^-) Au₃₈(SR)₂₄ and 18-electron (18e^-) Au₄₄(SR)₂₆ clusters is determined. In the step of formation of bi-icosahedral Au₃₈(SR)₂₄ from icosahedral [Au₂₅(SR)₁₈]^-, two Au₄ units are first formed. The third 2e^- hopping step results in formation of an icosahedron unit. The present studies offered new insights into the formation and size conversion mechanism of ligand-protected gold nanoclusters containing icosahedral cores.

Development of a Point-of-Care Cervico-Vaginal Sampling/Testing Device for the Colorimetric Detection of Cervical Cancer

This paper reports the colorimetric analysis of cervical-cancer-affected clinical samples by the in situ formation of gold nanoparticles (AuNPs) formed with cervico-vaginal fluids collected from healthy and cancer-affected patients in a clinical setup, termed "C-ColAur". We evaluated the efficacy of the colorimetric technique against the clinical analysis (biopsy/Pap smear) and reported the sensitivity and specificity. We investigated if the aggregation coefficient and size of the nanoparticles responsible for the change in color of the AuNPs (formed with clinical samples) could also be used as a measure of detecting malignancy. We estimated the protein and lipid concentrations in the clinical samples and attempted to investigate if either of these components was solely responsible for the color change, enabling their colorimetric detection. We also propose a self-sampling device, CerviSelf, that could enable the rapid frequency of screening. We discuss two of the designs in detail and demonstrate the 3D-printed prototypes. These devices, in conjugation with the colorimetric technique C-ColAur, have the potential to be self-screening techniques, enabling women to undergo rapid and frequent screening in the comfort and privacy of their homes, allowing a chance at an early diagnosis and improved survival rates.

Development of portable sensor for the detection of bacteria: effect of gold nanoparticle size, effective surface area, and interparticle spacing upon sensing interface

In this study, systematic development of a portable sensor for the rapid detection of Escherichia coli (E. coli) and Exiguobacterium aurantiacum (E. aurantiacum) was reported. A conductive glass was utilized as a substrate and developed the electrode patterns on it. Trisodium citrate (TSC) and chitosan-stabilized gold nanoparticles (AuNPs) (CHI-AuNP-TSC) and chitosan-stabilized AuNPs (CHI-AuNP) were synthesized and utilized as a sensing interface. The morphology, crystallinity, optical properties, chemical structures, and surface properties of immobilized AuNPs on the sensing electrodes were investigated. The sensing performance of the fabricated sensor was evaluated by using an electrochemical method to observe the current changes in cyclic voltammetric responses. The CHI-AuNP-TSC electrode has higher sensitivity toward E. coli than CHI-AuNP with a limit of detection (LOD) of 1.07 CFU/mL. TSC in the AuNPs synthesis process played a vital role in the particle size, the interparticle spacing, the sensor's effective surface area, and the presence of CHI around AuNPs, thus enhancing the sensing performance. Moreover, post-analysis of the fabricated sensor surface exhibited the sensor stability and the interaction between bacteria and the sensor surface. The sensing results showed a promising potential for rapid detection using a portable sensor for various water and food-borne pathogenic diseases.

Modified gold nanoparticle colorimetric probe-based biosensor for direct and rapid detection of Mycobacterium tuberculosis in sputum specimens

The incidence of Mycobacterium tuberculosis (MTB) is increasing due to lack of appropriate diagnostic and therapeutic methods. Therefore, early and accurate detection of this bacteria plays a significant role in controlling tuberculosis. This study aimed to design, develop, and implement a direct and rapid detection method of MTB using modified gold nanoparticle (AuNP) colorimetric probe-based biosensor in sputum specimens. Spherical AuNPs were synthesized by the citrate reduction method and were functionalized using thiol-modified oligonucleotides (AuNP-biosensor). AuNP-biosensor and IS6110 PCR were compared to the gold standard in terms of analytical and clinical sensitivity and specificity, positive predictive value (PPV), negative predictive value (NPV), diagnostic odds ratio (DOR), and accuracy in 52 clinical specimens. Gold standard was defined as a positive result in concentrated sputum smear microscopy (SSM), culture, or Xpert MTB/RIF.The AuNP-biosensor had 100% sensitivity and specificity for detection of total sputum DNA in less than 15 min with ready-to-use AuNP-biosensor. PPV, NPV, DOR and accuracy of this method were 100%, 100%, 2325 and 100%, respectively. Considering the promising results of the diagnostic value indices of the AuNP-biosensor, the designed method is an affordable, rapid, reliable, and cost-beneficial way for direct detection of MTB in sputum specimens.

A fluoride-induced aggregation test to quickly assess the efficiency of ligand exchange procedures from citrate capped AuNPs

Hypothesis

Citrate capped gold nanoparticles (AuNPs-citrate) are the starting material for most of the academic and industrial applications using gold nanoparticles. AuNPs-citrate must usually be functionalized with organic (bio)molecules, through a ligand exchange process, to become suitable for the envisaged application. The evaluation of the efficiency of the ligand-exchange process with a simple and convenient procedure is challenging.

Experiments

Fluoride was used to evaluate the efficiency of a ligand exchange process from AuNPs-citrate with five standard types of ligands. The relationship between the aggregation level of the AuNPs exposed to fluoride and the amount of residual citrate ligands at the surface of the AuNPs was studied. The fluoride-induced aggregation process was characterized with various techniques such as TEM, UV-Vis, ATR-FTIR or MANTA and then used to quickly identify the optimal conditions for the functionalization of AuNPs-citrate with a new ligand, i.e. a PEGylated calixarene-tetradiazonium salt (X4-(PEG)4).

Findings

It was observed that the fluoride-induced aggregation of AuNPs is proportional to the efficiency of the ligands exchange. We believe that these results could benefit to everyone engineering AuNPs for advanced applications, as the fluoride-aggregation of AuNPs can be used as a general and versatile quality test to verify the coating density of organic (bio)molecules on AuNPs.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Advanced visual sensing techniques for on-site detection of pesticide residue in water environments

Pesticide usage has increased to fulfil agricultural demand. Pesticides such as organophosphorus pesticides (OPPs) are ubiquitous in world food production. Their widespread usage has unavoidable detrimental consequences for humans, wildlife, water, and soil environments. Hence, the development of more convenient and efficient pesticide residue (PR) detection methods is of paramount importance. Visual detecting approaches have acquired a lot of interest among different sensing systems due to inherent advantages in terms of simplicity, speed, sensitivity, and eco-friendliness. Furthermore, various detections have been proven to enable real-life PR surveillance in environment water. Fluorometric (FL), colourimetric (CL), and enzyme-inhibition (EI) techniques have emerged as viable options. These sensing technologies do not need complex operating processes or specialist equipment, and the simple colour change allows for visual monitoring of the sensing result. Visual sensing techniques for on-site detection of PR in water environments are discussed in this paper. This paper further reviews prior research on the integration of CL, FL, and EI-based techniques with nanoparticles (NPs), quantum dots (QDs), and metal-organic frameworks (MOFs). Smartphone detection technologies for PRs are also reviewed. Finally, conventional methods and nanoparticle (NPs) based strategies for the detection of PRs are compared.

Photothermal-Enhanced Modulation of Cellular Membrane Potential Using Long-Wavelength-Activated Gold Nanoflowers

In mammalian cells, plasma membrane potential plays vital roles in both physiology and pathology and it is controlled by a network of membrane-resident ion channels. There is considerable interest in the use of nanoparticles (NPs) to control biological functions, including the modulation of membrane potential. The photoexcitation of gold NPs (AuNPs) tethered close to the plasma membrane has been shown to induce membrane depolarization via localized heating of the AuNP surface coupled with the opening of voltage-gated sodium channels. Previous work has employed spherical AuNPs (AuNS) with absorption in the 500-600 nm range for this purpose. However, AuNP materials with absorption at longer wavelengths [e.g., near-infrared (NIR)] would enable greater tissue penetration depth in vivo. We show here the use of new anisotropic-shaped AuNPs [gold nanoflowers (AuNFs)] with broad absorption spanning into the NIR part of the spectrum (∼650-1000 nm). The AuNFs are directly synthesized with bidentate thiolate ligands, which preserves the AuNF's shape and colloidal stability, while facilitating conjugation to biomolecules. We describe the characterization of the AuNF particles and demonstrate that they adhere to the plasma membrane when bioconjugated to PEGylated cholesterol (PEG-Chol) moieties. The AuNF-PEG-Chol mediated the depolarization of rat adrenal medulla pheochromocytoma (PC-12) neuron-like cells more effectively than AuNS-PEG-Chol and unconjugated AuNS and AuNF when photoexcited at ∼561 or ∼640 nm. Importantly, AuNF induction of depolarization had no impact on cellular viability. This work demonstrates anisotropic AuNFs as an enabling nanomaterial for use in cellular depolarization and the spatiotemporal control of cellular activity.

Two-Dimensional Polymer Networks Locking on Inorganic Nanoparticles

Two-dimensional polymers (2DPs), single-layer networks of covalently linked monomers, show perspectives as membranes and in electronics. However, 2D polymerization of monomers in orthogonal directions limited the formation of 2DPs on nanoparticles (NPs) with high surface curvatures. Here we propose a high-curvature 2D polymerization to form a single-layer 2DP network as a non-contacting ligand on the surface of NPs for their stabilization and functionalization. The high-curvature 2D polymerization of amphiphilic Gemini monomers was conducted in situ on surfaces of NPs with various sizes, shapes, and materials, forming highly cross-linked 2DPs. Selective etching of core-shell NPs led to 2DPs as a non-contact ligand of yolk-shell structures with excellent shape retention and high NP-surface accessibility. In addition, by copolymerization, the 2DP ligands can covalently link to other functional molecules. This work promotes the development of 2DPs on NPs for their functional modification.

Nanomaterials for optical biosensors in forensic analysis

Biosensors are compact analytical devices capable of transducing a biological interaction event into a measurable signal outcome in real-time. They can provide sensitive and affordable analysis of samples without the need for additional laboratory equipment or complex preparation steps. Biosensors may be beneficial for forensic analysis as they can facilitate large-scale high-throughput, sensitive screening of forensic samples to detect target molecules that are of high evidential value. Nanomaterials are gaining attention as desirable components of biosensors that can enhance detection and signal efficiency. Biosensors that incorporate nanomaterials within their design have been widely reported and developed for medical purposes but are yet to find routine employment within forensic science despite their proven potential. In this article, key examples of the use of nanomaterials within optical biosensors designed for forensic analysis are outlined. Their design and mechanism of detection are both considered throughout, discussing how nanomaterials can enhance the detection of the target analyte. The critical evaluation of the optical biosensors detailed within this review article should help to guide future optical biosensor design via the incorporation of nanomaterials, for not only forensic analysis but alternative analytical fields where such biosensors may prove a valuable addition to current workflows.

Simple and fast colorimetric detection of lipopolysaccharide based on aptamer and SYBR Green I mediated aggregation of gold nanoparticles

Lipopolysaccharide (LPS) poses a considerable threat to food safety and human health. A colorimetric assay for LPS detection based on LPS binding aptamer (LBA) and SYBR Green I (SG) mediated aggregation of gold nanoparticles (AuNPs) was established. In the absence of LPS, the LBA was absorbed onto the AuNPs surface which prevented SG-induced aggregation of AuNPs, and the sensing system exhibited red color. When LPS was added, it interacted with the LBA, forming a complex. At higher LPS concentration, many LBAs were exhausted resulting in SG-induced aggregation of AuNPs, and color change from red to blue. The range of colorimetric detection of LPS was linear in 0-12 EU/mL, with a limit of detection of 0.1698 EU/mL. Spiked LPS in real samples and interfering substances were also identified. This assay ingeniously using the fluorescent dye SG as an effective trigger of AuNPs aggregation, is rapid and facile than most of those earlier reported LBA-based LPS assays, and there is potential to be modified to construct assays for other targets.

Chitosan-Mediated Environment-Friendly Synthesis of Gold Nanoparticles with Enhanced Photonic Reactivity

We developed a very simple, efficient and environment-friendly synthesis method for the manufacturing of high-performance chitosan-capped gold nanoparticles that could be used for biosensing applications. Gold nanoparticles were prepared through the spontaneous reduction of chloroauric acid by chitosan, which was used as both a reducing and a stabilizing agent. The samples were heated to a temperature of 60 °C under ultrasonic conditions. The composite system made of chitosan as a matrix and gold nanoparticles demonstrated a high stability in an aqueous buffer solution. The nanoparticles displayed an enhancement in photonic performance compared with the same property of individual components as a result of surface plasmon resonance at the interface between the structural phases of the hybrid structure. The enhanced photonic reactivity of the hybrid nanostructure may offer new insights for future possible biosensing applications.

Simple and rapid detection of ractopamine in pork with comparison of LSPR and LFIA sensors

This study developed a simple and rapid strategic technique to detect ractopamine (chemical growth-promoting agent) in pork. Two highly sensitive and specific gold nanoparticle-based portable sensors, i.e., localized surface plasmon resonance (LSPR) sensors, and lateral flow immunoassay (LFIA) strips were developed to detect veterinary drug residues in food products, that have detrimental effects on humans. Optimization studies were conducted on several sensor devices to improve sensitivity. Each sensor comprised functionalized gold nanoparticles conjugated with ractopamine antibodies. The LSPR sensor chip achieved excellent detection sensitivity = 1.19 fg/mL and was advantageous for quantitative analysis due to its wide dynamic range. On the other hand, LFIA strips provided visual test confirmation and achieved 2.27 ng/mL detection sensitivity, significantly less sensitive than LSPR. The complementary sensors help overcome each other's shortcomings with both the techniques offering ease of use, affordability and rapid diagnosis. Thus, these sensors can be applied on-site for routine screening of harmful drug residues in pork meat. They also provide useful direction for advanced technologies to enhance assay performance for detecting various other food drug contaminants.

A Label-Free Gold Nanoparticles-Based Optical Aptasensor for the Detection of Retinol Binding Protein 4

Retinol-binding protein 4 (RBP4) has been implicated in insulin resistance in rodents and humans with obesity and T2DM, making it a potential biomarker for the early diagnosis of T2DM. However, diagnostic tools for low-level detection of RBP4 are still lagging behind. Therefore, there is an urgent need for the development of T2DM diagnostics that are rapid, cost-effective and that can be used at the point-of-care (POC). Recently, nano-enabled biosensors integrating highly selective optical detection techniques and specificity of aptamers have been widely developed for the rapid detection of various targets. This study reports on the development of a rapid gold nanoparticles (AuNPs)-based aptasensor for the detection of RBP4. The retinol-binding protein aptamer (RBP-A) is adsorbed on the surface of the AuNPs through van der Waals and hydrophobic interactions, stabilizing the AuNPs against sodium chloride (NaCl)-induced aggregation. Upon the addition of RBP4, the RBP-A binds to RBP4 and detaches from the surface of the AuNPs, leaving the AuNPs unprotected. Addition of NaCl causes aggregation of AuNPs, leading to a visible colour change of the AuNPs solution from ruby red to purple/blue. The test result was available within 5 min and the assay had a limit of detection of 90.76 ± 2.81 nM. This study demonstrates the successful development of a simple yet effective, specific, and colorimetric rapid assay for RBP4 detection.