Cosmetics and Cosmeceutical Applications of Chitin, Chitosan and Their Derivatives

Mechanisms of slow-release antibacterial properties in chitosan‑titanium dioxide stabilized perilla essential oil Pickering emulsions: Focusing on oil-water interfacial behaviors

Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %-3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.

Recent advances in the development of chitosan/hyaluronic acid-based hybrid materials for skin protection, regeneration, and healing: A review

Biomaterials play vital roles in regenerative medicine, specifically in tissue engineering applications. They promote angiogenesis and facilitate tissue creation and repair. The most difficult aspect of this field is acquiring smart biomaterials that possess qualities and functions that either surpass or are on par with those of synthetic products. The biocompatibility, biodegradability, film-forming capacity, and hydrophilic nature of the non-sulfated glycosaminoglycans (GAGs) (hyaluronic acid (HA) and chitosan (CS)) have attracted significant attention. In addition, CS and HA possess remarkable inherent biological capabilities, such as antimicrobial, antioxidant, and anti-inflammatory properties. This review provides a comprehensive overview of the recent progress made in designing and fabricating CS/HA-based hybrid materials for dermatology applications. Various formulations utilizing CS/HA have been developed, including hydrogels, microspheres, films, foams, membranes, and nanoparticles, based on the fabrication protocol (physical or chemical). Each formulation aims to enhance the materials' remarkable biological properties while also addressing their limited stability in water and mechanical strength. Additionally, this review gave a thorough outline of future suggestions for enhancing the mechanical strength of CS/HA wound dressings, along with methods to include biomolecules to make them more useful in skin biomedicine applications.

Effect of cross-linking density on the rheological behavior of ultra-soft chitosan microgels at the oil-water interface

In this paper, microgels with uniform particle size were prepared by physically cross-linking the hydrophobically modified chitosan (h-CS) with sodium phytate (SP). The effects of cross-linking density on the interfacial adsorption kinetics, viscoelasticity, stress relaxation, and micorheological properties of the hydrophobically modified chitosan microgels (h-CSMs) at the oil-water interface were extensively investigated by the dilatational rheology, compressional rheology, and particle tracing microrheology. The results were correlated with the particle size, morphology, and elasticity of the microgels characterized by dynamic light scattering and atomic force microscopy. It was found that with the increase of cross-linking density, the h-CSMs changed from a polymer-like state to ultra-soft fussy spheres with higher elastic modulus. The compression isotherms demonstrated multi-stage increase caused by the interaction between the shells and that between the cores of the microgels successively. As the increase of cross-linking density, the h-CSMs diffused slower to the oil-water interface, but demonstrating faster permeation adsorption and rearrangement at the oil-water interface, finally forming interfacial layers of higher viscoelastic modulus due to the core-core interaction. Both the initial tension relaxation and the microgel rearrangement after interface expansion became faster as the microgel elasticity increased. The interfacial microrheology demonstrated dynamic caging effect caused by neighboring microgels. This article provides a more comprehensive understanding of the behaviors of polysaccharide microgels at the oil-water interface.

A comprehensive review of chitosan-based functional materials: From history to specific applications

Chitosan (CTS), a natural biopolymer derived from chitin, has garnered significant attention owing to its potential chemical, biological, and physical properties, such as biocompatibility, bioactivity, and biosafety. This comprehensive review traces the historical development of CTS-based materials and delves into their specific applications across various fields. The study highlights the evolution of CTS from its initial discovery to its current state, emphasizing key milestones and technological advancements that have expanded its utility. Despite the extensive research, the synthesis and functionalization of CTS to achieve desired properties for targeted applications remain a challenge. This review addresses current problems such as the scalability of production, consistency in quality, and the environmental impact of extraction and modification processes. Additionally, it explores the novel applications of CTS-based materials in biomedicine, agriculture, environmental protection, and food industry, showcasing innovative solutions and future potentials. By providing a detailed analysis of the current state of CTS research and identifying gaps in knowledge, this review offers a valuable resource for researchers and industry professionals. The novelty of this work lies in its holistic approach, combining historical context with a forward-looking perspective on emerging trends and potential breakthroughs in the field of CTS-based functional materials. Therefore, this review will be helpful for readers by summarizing recent advances and discussing prospects in CTS-based functional materials.

The Effectiveness of Curcumin in Treating Oral Mucositis Related to Radiation and Chemotherapy: A Systematic Review

Chemotherapy (CT) and radiation therapy (RT), while effective against cancer, often cause severe side effects, such as oral mucositis and other oral diseases. Oral mucositis, characterized by inflammation and ulceration of the oral mucosa, is one of the most painful side effects that can reduce quality of life and limit cancer treatment. Curcumin, a polyphenol from Curcuma longa, has garnered attention for its anti-inflammatory, antioxidant, and anti-carcinogenic properties, which protect the oral mucosa by reducing oxidative stress and modulating inflammation. This study reviews the therapeutic potential of curcumin in preventing and managing oral mucositis caused by CT and RT. Clinical trials show curcumin's effectiveness in reducing the incidence and severity of oral mucositis. Although curcumin supplementation appears to be a promising and cost-effective approach for mitigating oral complications in cancer patients, further clinical trials are needed to confirm its efficacy and optimize dosing strategies.

Roles of Polymer Concentration and Ionic Strength in the Deposition of Chitosan of Fungal Origin onto Negatively Charged Surfaces

This study examines the potential of fungal chitosan derived from Aspergillus niger as a sustainable alternative to traditional petrochemical-based ingredients in cosmetic products. Specifically, the research examines the solubility of fungal chitosan in aqueous solutions of varying ionic strength and its adsorption onto negatively charged surfaces that mimic human hair keratin. The adsorption behavior, water content, and frictional properties of chitosan films were evaluated using a quartz crystal microbalance with dissipation monitoring and a surface force apparatus (SFA). The findings indicated that fungal chitosan exhibits good solubility at a pH of 4.5. Conversely, the adsorption of chitosan is subject to the influence of both polymer concentration and ionic strength. At the lowest ionic strengths, a screening-enhanced adsorption process occurs as a consequence of the reduction in chitosan solubility in the presence of salt. This results in the depletion of polymer chains from the solution and their subsequent deposition. An increase in ionic strength above 15-20 mM results in a worsening of the chitosan-surface interaction, due to the simultaneous screening of both the chitosan and the surface charges. This results in a hindrance to the adsorption process. The deposited films are highly hydrated, and this hydration increases with both polymer concentration and ionic strength. Furthermore, the films exhibit a predominantly elastic behavior, and the response of the films under shear deformations shows a strong dependence on the polymer concentration. These findings contribute to the development of environmentally friendly cosmetic formulations that meet consumer demands for sustainability.

Microplastics in Cosmetics: Open Questions and Sustainable Opportunities

The cosmetic industry is now changing or rather having an ecological transition in which formulations such as creams, lotions, and powders for make-up, skin and hair care must not contain microplastics, now a taboo word in this field. Nowadays, many companies are intensifying their research and development (R&D) work to align with recent and future legislation that provides for their elimination to safeguard the ecosystem. The production of new eco-sustainable materials is currently a hot topic which finds its place in a market worth above 350 billion dollars which will reach more than 700 billion dollars in a very short time. This review offers an overview of the main advantages and adverse issues relating to the use of microplastics in cosmetics and of their impact, providing an insight into the properties of the polymeric materials that are currently exploited to improve the sensorial characteristics of cosmetic products. In addition, the various regulatory restrictions in the different geographical areas of the world are also described, which is matter for reflection on future direction. Finally, a prospective vision of possible solutions to replace microplastics with sustainable alternatives complete the picture of the next generation personal care products to support decision-making in the cosmetic marketplace.

Chitosan-Coated Liposome Formulations for Encapsulation of Ciprofloxacin and Etoposide

Cancer and bacterial infections rank among the most significant global health threats. accounting for roughly 25 million fatalities each year. This statistic underscores the urgent necessity for developing novel drugs, enhancing current treatments, and implementing systems that boost their bioavailability to achieve superior therapeutic outcomes. Liposomes have been recognised as effective carriers; nonetheless, they encounter issues with long-term stability and structural integrity, which limit their pharmaceutical applicability. Chitosomes (chitosan-coated liposomes) are generally a good alternative to solve these issues. This research aims to demonstrate the effective individual encapsulation of ciprofloxacin (antibacterial, hydrophilic) and etoposide (anticancer, hydrophobic), within chitosomes to create more effective drug delivery systems (oral administration for ciprofloxacin, parenteral administration for etoposide). Thus, liposomes and chitosomes were prepared using the thin-film hydration technique and were characterised through ATR-FTIR, Dynamic Light Scattering (DLS), zeta potential, and release profiling. In both cases, the application of chitosomes enhanced long-term stability in size and surface charge. Chitosome-encapsulated ciprofloxacin formulations exhibited a slower and sustained release profile, while the combined effect of etoposide and chitosan showed heightened efficacy against the glioblastoma cell line U373. Therefore, coating liposomes with chitosan improved the encapsulation system's properties, resulting in a promising method for drug delivery.

Activities of proteases in deep eutectic solvents and removal of protein from chitin by subtilisin A in betaine/glycerol

This research intended to remove residual protein from chitin with proteases in deep eutectic solvents (DESs). The activities of some proteases in several DESs, including choline chloride/p-toluenesulfonic acid, betaine/glycerol (Bet/G), choline chloride/malic acid, choline chloride/lactic acid, and choline chloride/urea, which are capable of dissolving chitin, were tested, and only in Bet/G some proteases were found to be active, with subtilisin A, ficin, and bromelain showing higher activity than other proteases. However, the latter two proteases caused degradation of chitin molecules. Further investigation revealed that subtilisin A in Bet/G did not exhibit "pH memory", which is a universal characteristic displayed by enzymes dispersed in organic phases, and the catalytic characteristics of subtilisin A in Bet/G differed significantly from those in aqueous phase. The conditions for protein removal from chitin by subtilisin A in Bet/G were determined: Chitin dissolved in Bet/G with 0.5 % subtilisin A (442.0 U/mg, based on the mass of chitin) was hydrolyzed at 45 °C for 30 min. The residual protein content in chitin decreased from 5.75 % ± 0.10 % to 1.01 % ± 0.12 %, improving protein removal by 57.20 % compared with protein removal obtained by Bet/G alone. The crystallinity and deacetylation degrees of chitin remained unchanged after the treatment.

Modified chitosan: Insight on biomedical and industrial applications

Chitosan (CS), a by -product of chitin deacetylation can be useful in a broad range of purposes, to mention agriculture, pharmaceuticals, material science, food and nutrition, biotechnology and of recent, in gene therapy. Chitosan is a highly desired biomolecule due to the existence of many sensitive functional groups inside the molecule and also because of its net cationicity. The latter provides flexibility for creating a wide range of derivatives for particular end users across various industries. This overview aims to compile some of the most recent research on the bio-related applications that chitosan and its derivatives can be used for. However, chitosan's reactive functional groups are amendable to chemical reaction. Modifying the material to show enhanced solubility, a greater range of application options and pH-sensitive targeting and others have been a major focus of chitosan research. This review describes the modifications of chitosan that have been made to improve its water solubility, pH sensitivity, and capacity to target chitosan derivatives. Applying the by-products of chitosan as antibacterial, in targeting, extended release and as delivery systems is also covered. The by-products of chitosan will be important and potentially useful in developing new biomedical drugs in time to come.

Magnetic-stirring-enhanced mechanical amorphous dispersion extraction for the hydrophobic phytochemical constituents using an aqueous solution from a medicinal plant

A method involving chitosan-assisted magnetic-stirring-enhanced mechanical amorphous dispersion extraction was developed and utilized to extract hydrophobic anthraquinones from Rhei Radix et Rhizoma prior to ultrahigh performance liquid chromatography analysis. Incorporating natural chitosan as a dispersant facilitated the extraction of hydrophobic anthraquinones using purified water, considerably enhancing the eco-friendliness of the extraction methodology. To optimize extraction efficiency, an extensive evaluation of the crucial parameters influencing rhubarb yield was conducted. Furthermore, a response surface methodology was applied to optimize the extraction conditions. Under these optimized conditions, the method exhibited linearity ranges of 0.1-100 µg/mL, with correlation coefficients between 0.9990 and 0.9998. The method's intraday (n = 6) and interday (n = 6) precision levels were maintained at ≤3.58%, which was considered to be within acceptable limits. The computed detection and quantification limits were 16.54-24.60 and 54.91-82.04 ng/mL, respectively. Consequently, this optimized method was effectively employed to extract five specific compounds (aloe-emodin, emodin, rhein, chrysophanol, and physcion) from Rhei Radix et Rhizoma, achieving recoveries ranging from 86.43% to 102.75%.

Microspheres Based on Blends of Chitosan Derivatives with Carrageenan as Vitamin Carriers in Cosmeceuticals

Chitosan (CS) has a natural origin and is a biodegradable and biocompatible polymer with many skin-beneficial properties successfully used in the cosmetics and pharmaceutical industry. CS derivatives, especially those synthesized via a Schiff base reaction, are very important due to their unique antimicrobial activity. This study demonstrates research results on the use of hydrogel microspheres made of [chitosan-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan)], [chitosan-2-pyridinecarboxaldehyde-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan), and chitosan-sodium-4-formylbenzene-1,3-disulfonate-graft-poly(ε-caprolactone)]-blend-(ĸ-carrageenan) as innovative vitamin carriers for cosmetic formulation. A permeation study of retinol (vitamin A), L-ascorbic acid (vitamin C), and α-tocopherol (vitamin E) from the cream through a human skin model by the Franz Cell measurement system was presented. The quantitative analysis of the release of the vitamins added to the cream base, through the membrane, imitating human skin, showed a promising profile of its release/penetration, which is promising for the development of a cream with anti-aging properties. Additionally, the antibacterial activity of the polymers from which the microspheres are made allows for the elimination of preservatives and parabens as cosmetic formulation ingredients.

"Edible Beauty": The Evolution of Environmentally Friendly Cosmetics and Packaging

The cosmetics industry plays a significant role in the global economy and consumer lifestyles. Its dynamic and adaptable characteristics make it a key player worldwide. The cosmetics industry generates enormous profits globally, injecting billions of dollars into the world's economy each year. The industry's marketing efforts, product launches, and trends influence consumer behavior and perceptions of beauty, contributing to cultural dialogues and societal norms. This study, conducted with a rigorous bibliometric and systematic literature review, offers a comprehensive overview of recent progress in edible cosmetics. The "skincare you can eat" is an innovative branch of cosmetics that employs food co-products and by-products to create edible skincare and hair products and edible packaging materials to advance human well-being and sustainability while honoring the ecological boundaries of our planet. Nutrients and antioxidants derived from organic waste are used in cosmetics and packaging. Some doubts remain about the capacity of edible packaging to be attractive to consumers and offer a reasonable shelf life for cosmetics, and also about safety. It is desirable for the authorities to guarantee consumer health through carefully regulating labeling requirements and good manufacturing practices for cosmetics and edible packaging.

A comprehensive characterization of Hermetia illucens derived chitosan produced through homogeneous deacetylation

The increasing demand for chitin and chitosan is driving research to explore alternative sources to crustaceans. Insects, particularly bioconverters as Hermetia illucens, are promising substitutes as they process food industry waste into valuable molecules, including chitin. Chitosan can be produced by chitin deacetylation: hot deacetylation to obtain a heterogeneous chitosan, the commonly produced, and cold deacetylation to obtain a homogeneous chitosan, not widely available. The two different treatments lead to a different arrangement of the amine and acetyl groups in the chitosan structure, affecting its molecular weight, deacetylation degree, and biological activity. This is the first report on the production and chemical-physical and biological characterization of homogenous chitosan derived from H. illucens larvae, pupal exuviae, and adults. This work, in addition to the report on heterogeneous chitosan by our research group, completes the overview of H. illucens chitosan. The yield values obtained for homogeneous chitosan from pupal exuviae (3 and 7 %) are in the range of insect (2-8 %) and crustaceans (4-15 %) chitosan. The evaluation of the antioxidant activity and antimicrobial properties against Gram-negative (Escherichia coli) and Gram-positive (Micrococcus flavus) bacteria confirmed the great versatility of H. illucens chitosan for biomedical and industrial applications and its suitability as an alternative source to crustaceans.

Chitosan as a Bio-Based Ligand for the Production of Hydrogenation Catalysts

Bio-based polymers are attracting increasing interest as alternatives to harmful and environmentally concerning non-biodegradable fossil-based products. In particular, bio-based polymers may be employed as ligands for the preparation of metal nanoparticles (M(0)NPs). In this study, chitosan (CS) was used for the stabilization of Ru(0) and Rh(0) metal nanoparticles (MNPs), prepared by simply mixing RhCl3 × 3H2O or RuCl3 with an aqueous solution of CS, followed by NaBH4 reduction. The formation of M(0)NPs-CS was confirmed by Fourier Transform Infrared Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Thermal Gravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray Analysis (EDX), Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD). Their size was estimated to be below 40 nm for Rh(0)-CS and 10nm for Ru(0)-CS by SEM analysis. M(0)NPs-CS were employed for the hydrogenation of (E)-cinnamic aldehyde and levulinic acid. Easy recovery by liquid-liquid extraction made it possible to separate the catalyst from the reaction products. Recycling experiments demonstrated that M(0)NPs-CS were highly efficient up to four times in the best hydrogenation conditions. The data found in this study show that CS is an excellent ligand for the stabilization of Rh(0) and Ru(0) nanoparticles, allowing the production of some of the most efficient, selective and recyclable hydrogenation catalysts known in the literature.

Fabrication of biodegradable and antibacterial films of chitosan/polyvinylpyrrolidone containing Eucalyptus citriodora extracts

The main objective of this work is to develop biodegradable active films through the combination of the extracts with different solvents sourced from Eucalyptus citriodora leaves, with films made of chitosan (Cs) and polyvinylpyrrolidone (PVP). Chromatographic profiling investigations were carried out to examine the antibacterial characteristics of E. citriodora extracts before their direct incorporation into the polymer films. At this point, the potent antimicrobial properties of the phenol compounds and bioactive components demonstrated an antibacterial activity that was particularly noticeable at a hexane resolution. Different morphological characteristics were seen on films made from these solvent extracts, such as Cs/PVP-AE, Cs/PVP-EAE, and Cs/PVP-HE, when scanning electron microscopy was used. Numerous other outcomes of all the interactions between the extract particles and the film were shown by the pores defined by the Cs/PVP film's porous nature. The addition of the extracts, either alone or in combination, greatly enhanced the Cs/NC/PVP films' mechanical characteristics. It has also been shown that adding plant extracts greatly increased the antibacterial activity of these films. These findings reveal that Cs/PVP films loaded with extract may be utilized as more environmentally acceptable substitutes for possible food packaging application by increasing shelf life of food products.

Fabrication of multifunctional facial masks from phenolic acid grafted chitosan/collagen peptides via aqueous electrospinning

Facial masks have become ubiquitous in our daily life to endow skin enough moisture and activated nutrition through mask nonwovens infused with skincare ingredients. However, the active nutrients in wet masks are prone to deterioration and deactivation. Herein, a novel multifunctional nanofiber dry mask was successfully prepared using aqueous-electrospun phenolic acid grafted chitosan/collagen peptides. When used, the functional nanofibers in the mask dissolve through spraying moisture, activating active ingredients in response to water and providing in-situ free radical scavenging, moisturizing and antibacterial effects to the skin. In this work, a series of gallic acid (GA), caffeic acid (CA), and protocatechuic acid (PA) have been studied to be grafted with chitosan to improve water solubility of chitosan (CS). Also, through aqueous electrospinning of phenolic acid-grafted chitosan/collagen peptides, a one-step green multifunctional nanofiber mask was obtained. The results showed that the mask had a 12.14 % moisturizing rate and a 94.09 % activity for removing free radicals from the skin after encountering moisture. Considering its high efficiency, controllable function release, and easy processability, the nanofiber multifunctional mask may provide a competitive alternative to facial masks and promote potential value-added applications of bio-based macro-molecules.

Effect of Elicitor Treatments on Quality Attributes in Blueberry: Implications of Cultivar and Environmental Conditions

Elicitors of plant defence responses can trigger defence mechanisms that are able to protect plant tissues from biotic or abiotic stresses. Since one defence response involves the activation of secondary metabolites' biosynthesis, the purpose of this study was to evaluate the effect of chitosan and melatonin pre-harvest treatments on the quality and the nutritional parameters of the fruits of blueberry (Vaccinium corymbosum L.). Across the two years of experiment, three different cultivars (cv.s. 'Cosmopolitan', 'Hortblue Poppins' and 'Legacy') were treated with 1% chitosan or 100 µM melatonin every two weeks during the ripening season and ripe fruits were progressively harvested and analysed. The treatment with both elicitors had only slight effects on dry matter, soluble solids content, titratable acidity and pH, with a cultivar-dependent response. On the other hand, elicitors significantly affected the levels of phenylpropanoid and antioxidant compounds in all cvs. in both years, with a higher accumulation of total anthocyanins and phenolics and the enhancement of the antioxidant capacity, with positive effects on the nutraceutical quality of fruits. The anthocyanin profile in terms of both absolute concentrations and the relative proportion of single anthocyanins was affected by both harvest year and cv., highlighting the role of the genetic background in the plant response to environmental conditions (with particular reference to summer heat stress) and to elicitor treatments.

Polysaccharides from shell waste of shellfish and their applications in the cosmeceutical industry: A review

Shell waste from shellfish processing contains valuable natural polysaccharides, including sulfated polysaccharides, acidic polysaccharides, glycosaminoglycans, chitin and their derivatives. These shellfish waste-derived polysaccharides have numerous functional and biological properties that can be applied in various industries, including the cosmeceutical industry. In keeping with global sustainability and green industry trends, the cosmeceuticals industry is transitioning from petrochemical-based ingredients to natural substitutes. In this context, shell waste-derived polysaccharides and their derivatives can play a major role as natural substitutes for petroleum-based components in various cosmeceutical skincare, hair care, oral care and body care products. This review focuses on the presence of polysaccharides and their derivatives in shell waste and discusses their various cosmeceutical applications in skin care, hair care, sun care, oral care and body care products. This indicates that shell waste utilization will help create a circular economy in which extracted polysaccharides are used to produce green cosmeceutical products.

Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa)

Biobased plastics provide a sustainable alternative to conventional food packaging materials, thereby reducing the environmental impact. The present study investigated the effectiveness of chitosan with varying levels of Moringa oleifera seed powder (MOSP) and tannic acid (TA). Chitosan (CS) biocomposite films with tannic acid acted as a cross-linker, and Moringa oleifera seed powder served as reinforcement. To enhance food packaging and film performance, Moringa oleifera seed powder was introduced at various loadings of 1.0, 3.0, 5.0, and 10.0 wt.%. Fourier-transform infrared spectroscopy, X-ray diffraction, and scanning electron microscopy analyses were performed to study the structure and morphology of the CS/TA/MOSP films. The scanning electron microscopy results confirmed that chitosan/TA with 10.0 wt.% of MOSP produced a lightly miscible droplet/matrix structure. Furthermore, mechanical properties, swelling, water solubility, optical barrier, and water contact angle properties of the film were also calculated. With increasing Moringa oleifera seed powder contents, the biocomposite films' antimicrobial and antifungal activity increased at the 10.0 wt.% MOSP level; all of the observed bacteria [Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Aspergillus niger (A. niger), and Candida albicans (C. albicans)] had a notably increased percentage of growth. The film, with 10.0 wt.% MOSP content, effectively preserves strawberries' freshness, making it an ideal food packaging material.

Shrimp Waste Upcycling: Unveiling the Potential of Polysaccharides, Proteins, Carotenoids, and Fatty Acids with Emphasis on Extraction Techniques and Bioactive Properties

Shrimp processing generates substantial waste, which is rich in valuable components such as polysaccharides, proteins, carotenoids, and fatty acids. This review provides a comprehensive overview of the valorization of shrimp waste, mainly shrimp shells, focusing on extraction methods, bioactivities, and potential applications of these bioactive compounds. Various extraction techniques, including chemical extraction, microbial fermentation, enzyme-assisted extraction, microwave-assisted extraction, ultrasound-assisted extraction, and pressurized techniques are discussed, highlighting their efficacy in isolating polysaccharides, proteins, carotenoids, and fatty acids from shrimp waste. Additionally, the bioactivities associated with these compounds, such as antioxidant, antimicrobial, anti-inflammatory, and antitumor properties, among others, are elucidated, underscoring their potential in pharmaceutical, nutraceutical, and cosmeceutical applications. Furthermore, the review explores current and potential utilization avenues for these bioactive compounds, emphasizing the importance of sustainable resource management and circular economy principles in maximizing the value of shrimp waste. Overall, this review paper aims to provide insights into the multifaceted aspects of shrimp waste valorization, offering valuable information for researchers, industries, and policymakers interested in sustainable resource utilization and waste-management strategies.

Preparation of nanochitin using deep eutectic solvents

Chitin is an abundant and renewable non-wood biopolymer. Nanochitin is formed by the assembly of chitin molecules, which has the advantages of large tensile strength, high specific surface area, and biodegradability, so it has been widely used. However, the traditional methods of preparing nanochitin have many drawbacks. As the new generation of green solvents, deep eutectic solvents (DESs) have been successfully applied in the fields of chitin dissolution, extraction, and nanochitin preparation. In this review, the relevant knowledge of chitin, nanochitin, and DESs was first introduced. Then, the application status of DESs in the fields of chitin was summarized, with a focus on the preparation of nanochitin using DESs. In conclusion, this review provided a comprehensive analysis of the published literature and proposed insights and development trends in the field of preparation of nanochitin using DESs, aiming to provide guidance and assistance for future researchers.

Maximizing crustaceans (shrimp, crab, and lobster) by-products value for optimum valorization practices: A comparative review of their active ingredients, extraction, bioprocesses and applications

BACKGROUND

The processing of the three major crustaceans (shrimp, lobster, and crab) is associated with inevitable by-products, high waste disposal costs, environmental and human health issues, loss of multiple biomaterials (chitin, protein hydrolysates, lipids, astaxanthin and minerals). Nowadays, these bioresources are underutilized owing to the lack of effective and standardized technologies to convert these materials into valued industrial forms.

AIM OF REVIEW

This review aims to provide a holistic overview of the various bioactive ingredients and applications within major crustaceans by-products. This review aims to compare various extraction methods in crustaceans by-products, which will aid identify a more workable platform to minimize waste disposal and maximize its value for best valorization practices.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The fully integrated applications (agriculture, food, cosmetics, pharmaceuticals, paper industries, etc.) of multiple biomaterials from crustaceans by-products are presented. The pros and cons of the various extraction methods, including chemical (acid and alkali), bioprocesses (enzymatic or fermentation), physical (microwave, ultrasound, hot water and carbonic acid process), solvent (ionic liquids, deep eutectic solvents, EDTA) and electrochemistry are detailed. The rapid development of corresponding biotechnological attempts present a simple, fast, effective, clean, and controllable bioprocess for the comprehensive utilization of crustacean waste that has yet to be applied at an industrial level. One feasible way for best valorization practices is to combine innovative extraction techniques with industrially applicable technologies to efficiently recover these valuable components.

Pickering emulsions stabilized by chitosan-flaxseed gum-hyaluronic acid nanoparticles for controlled topical release of ferulic acid

Chitosan (CS) based nanoparticles (NPs) were fabricated via an ionic gelation reaction modified by flaxseed gum (FG) or sodium tripolyphosphate (STPP). The average particle size, morphology, interfacial tension, and wettability of NPs were characterized. The particle size of CS-STPP-HA (hyaluronic acid)-FA (ferulic acid) NPs and CS-FG-HA-FA NPs was 400.8 nm and 262.4 nm, respectively under the optimized conditions of CS/STPP = 5:1 (w/w) or CS/FG = 1:1 (v/v) with HA concentration of 0.25 mg/mL and FA dosage of 25 μM. FG acted as a good alternative for STPP to form particles with CS in stabilizing Pickering emulsion with an internal diacylglycerol (DAG) phase of 50-80 % (v/v). The complex nanoparticles had high surface activity and contact angle close to 90 °C, being able to tightly packed at the droplet surface. The emulsions had high thermal, ionic and oxidative stability. With the aid of moisturizing polysaccharides and DAG oil, the emulsions had a good sustained-release ability for FA with deeper penetration and retention into the dermis of the skin. Thus, FG and HA-based NPs serve as green vehicles for the fabrication of novel Pickering emulsions and possess great potential to be applied as a delivery system for lipophilic active agents in functional food and cosmetic products.

Therapeutic and Phytochemical Properties of Thymoquinone Derived from Nigella sativa

BACKGROUND

Nigella sativa (N. sativa), commonly known as black seed or black cumin, belongs to the family Ranunculaceae. It contains several phytoconstituents, Thymoquinone (TQ), thymol, thymohydroquinone, carvacrol, and dithymoquinone. TQ is the main phytoconstituent present in N. sativa that is used as an herbal compound, and it is widely used as an antihypertensive, liver tonic, diuretic, digestive, anti-diarrheal, appetite stimulant, analgesic, and antibacterial agent, and in skin disorders.

OBJECTIVE

The study focused on collecting data on the therapeutic or pharmacological activities of TQ present in N. sativa seed.

METHODS

Antidiabetic, anticancer, immunomodulator, analgesic, antimicrobial, anti-inflammatory, hepato-protective, renal protective, and antioxidant properties of TQ have been studied by various scientists.

CONCLUSION

TQ seems to have a variety of consequences on how infected cells behave at the cellular level.

Solubilization of chitosan in biologically relevant solvents by a low-temperature solvent-exchange method for developing biocompatible chitosan materials

Chitosan has great potential for biomedical applications. However, the intractable solubility of chitosan is a major bottleneck hampering its utilization. In this work, we report a low-temperature solvent-exchange method to solubilize chitosan in biologically relevant solvents (bio-solvents) including water, salines, and cell culture media. Chitosan was firstly dissolved in ionic liquid (IL) 1-ethyl-3-methylimidazolium acetate (EMIM Ac). The chitosan/IL solution was then dialyzed against bio-solvents at 4 °C, during which a solvent exchange process took place. At the end of 24 h dialysis, aqueous chitosan pseudosolutions formed. Low temperature is found to be crucial for efficient solubilization of chitosan during the solvent exchange process. Increasing temperature to 50 °C leads to the formation of solid chitosan hydrogel. Chitosan in the water-based pseudosolution presents as positively charged particles. The pseudosolution shows a high positive zeta potential of about +52.6 mV and good colloidal stability. The water-based pseudosolutions with different amounts of chitosan contents exhibit the rheological features of weak liquid gels. By using these pseudosolutions, the fabrication of various chitosan materials is realized readily. Both chitosan pseudosolution and its downstream products are highly biocompatible. In this strategy, using IL as a solvent-medium and processing a low-temperature solvent exchange are the two key parameters to solubilize chitosan.

Trends in biopolymer science applied to cosmetics

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules.

Chitosan nanoparticle toxicity: A comprehensive literature review of in vivo and in vitro assessments for medical applications

Topic definition

This literature review aims to update the current knowledge on toxicity of chitosan nanoparticles, compare the recent findings and identify the gaps with knowledge that is present for the chitosan nanoparticles.

Methods

The publications between 2010 and 2020 were searched in Science Direct, Pubmed.gov, Google Scholar, Research Gate, and ClinicalTrials.gov, according to the inclusion and exclusion criteria. 30 primary research studies were obtained from the literature review to compare the in vitro in vivo toxicity profiles among the chitosan nanoparticles.

Major highlights

Chitosan nanoparticles and other types of nanoparticles show cytotoxic effects on cancer cells while having minimal toxicity on normal cells. This apparent effect poses some considerations for use in incorporating cancer therapeutics into chitosan nanoparticles as an administration form. The concentration, duration of exposure, and pH of the solution can influence nanoparticle cytotoxicity, particularly in zebrafish. Different cell lines exhibit varying degrees of toxicity when exposed to nanoparticles, and of note are liver cells that show toxicity under exposure as indicated by increased alanine transaminase (ALT) levels. Aside from ALT, platelet aggregation can be considered a toxicity induced by chitosan nanoparticles. In addition, zebrafish cells experience the most toxicity, including organ damage, neurobehavioral impairment, and developmental abnormalities, when exposed to nanoparticles. However, nanoparticles may exhibit different toxicity profiles in different organisms, with brain toxicity and liver toxicity being present in zebrafish but not rats. Different organs exhibit varying degrees of toxicity, with the eye and mouth apparently having the lowest toxicity, while the brain, intestine, muscles and lung showing mixed results. Cardiotoxicity induced by chitosan nanoparticles was not observed in zebrafish embryos, and nanoparticles may reduce cardiotoxicity when delivering drug. Toxicity found in an organ may not necessarily mean that it is toxic towards all the cells found in that organ, as muscle toxicity was present when tested in zebrafish but not in C2C12 myoblast cells. Some of the studies conducted may have limitations that need to be reconsidered to account for differing results, with some examples being two experiments done on HeLa cells where one study concluded chitosan nanoparticles were toxic to the cells while the other seems to have no toxicity present. With regards to LD50, one study has stated the concentration of 64.21 mg/ml was found. Finally, smaller nanoparticles generally exhibit higher toxicity in cells compared to larger nanoparticles.

Scope for future work

This literature review did not uncover any published clinical trials with available results. Subsequent research endeavors should prioritize conducting clinical trials involving human volunteers to directly assess toxicity, rather than relying on cell or animal models.

Chitosan Hydrogels Crosslinked with Oxidized Sucrose for Antimicrobial Applications

Oxidized sucrose (OS) reacts with amino-group-containing polysaccharides, including chitosan, without catalyst, resulting in hydrogels entirely composed of carbohydrates. The presence of imine bonds with low structural stabilities and unreacted aldehydes in the structures of these hydrogels hinder their application as biomaterials. Therefore, herein, the chitosan hydrogels (CTSGs) obtained after the crosslinking of chitosan with OS were reduced using sodium borohydride to convert imine bonds to secondary amines and aldehydes to alcohols. The structures of CTSGs were comprehensively characterized using Fourier transform infrared and 13C nuclear magnetic resonance spectroscopies, and the results implied that the degree of crosslinking (CR) depended on the OS feed amount used during CTSG preparation. The properties of CTSGs were significantly dependent on CR; with an increase in CR, the thermal stabilities and dynamic moduli of CTSGs increased, whereas their swelling properties decreased. CTSGs exhibited antimicrobial properties against the gram-negative bacterium Escherichia coli, and their performances were also dependent on CR. The results indicated the potentials of CTSGs completely based on carbohydrates as antimicrobial hydrogels for various medical and pharmaceutical applications. We believe that this study will contribute to the development of hydrogels for application in the food, medical, and pharmaceutical fields.

N-acetyl-d-glucosamine-based oligosaccharides from chitin: Enzymatic production, characterization and biological activities

Chitin, the second most abundant biopolymer, possesses diverse applications in the food, agricultural, and pharmaceutical industries due to its functional properties. However, the potential applications of chitin are limited owing to its high crystallinity and low solubility. N-acetyl chitooligosaccharides and lacto-N-triose II, the two types of GlcNAc-based oligosaccharides, can be obtained from chitin by enzymatic methods. With their lower molecular weights and improved solubility, these two types of GlcNAc-based oligosaccharides display more various beneficial health effects when compared to chitin. Among their abilities, they have exhibited antioxidant, anti-inflammatory, anti-tumor, antimicrobial, and plant elicitor activities as well as immunomodulatory and prebiotic effects, which suggests they have the potential to be utilized as food additives, functional daily supplements, drug precursors, elicitors for plants, and prebiotics. This review comprehensively covers the enzymatic methods used for the two types of GlcNAc-based oligosaccharides production from chitin by chitinolytic enzymes. Moreover, current advances in the structural characterization and biological activities of these two types of GlcNAc-based oligosaccharides are summarized in the review. We also highlight current problems in the production of these oligosaccharides and trends in their development, aiming to offer some directions for producing functional oligosaccharides from chitin.

Antibacterial activity of novel synthesized chitosan-graft-poly(N-tertiary butylacrylamide)/neodymium composites for biomedical application

In this present study, composites of chitosan-graft-poly(N-tertiary butylacrylamide) (CH-graft-poly(N-tert-BAAm)) copolymer, with Neodymium (Nd), an important rare earth element, were prepared by precipitation technique. Nd was successfully incorporated into the polymer of different weight percentages (0.5%, 1%, and 2%) without any degradation. The effect of neodymium additives on the structural, morphological, and antibacterial activities against gram-positive bacteria and gram-negative bacteria of the polymer was analyzed using various instrument techniques. X-ray diffraction (XRD) results together with Fourier Transform Infrared (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) studies confirmed the morphology of Nd-doped CH-graft-poly(N-tert-BAAm) composites without any other impurities. The antibacterial effect of Nd was studied by adding it to the copolymer in a weight ratio of 0.5%-2%. The antibacterial effect of neodymium concentration on four different strains of bacteria was investigated: Escherichia coli (ATCC 25922) (E. coli), Pseudomonas aeruginosa (DSM 50071) (P. aeruginosa), Bacillus subtilis (DSM 1971) (B. subtilis), and Staphylococcus aureus subsp. aureus (ATCC 25923) (S. aureus). The antibacterial activities of the obtained composites were determined using the Agar Well Diffusion Assay Method. Experimental results show that Nd binds well to CH-graft-poly(N-tert-BAAm). Activity against E. coli, P. aeruginosa, B. subtilis, and S. aureus subsp. aureus creates a potential for pharmaceutical and biomedical applications.

Chitosan-Based Films Containing Rutin for Potential Cosmetic Applications

Chitosan is a polysaccharide with film-forming properties. Such properties are widely used for the preparation of beauty masks and wound-healing materials. In this work, chitosan-based films containing hyaluronic acid and rutin have been researched for potential cosmetic applications. Rutin was added to a chitosan solution in lactic acid, and then thin films were fabricated. The structure of the films was studied using FTIR spectroscopy. Surface properties were studied using an AFM microscope. The release of rutin from chitosan-based film was researched by the HPLC method. The properties of the skin, such as elasticity and moisturization, were studied using the Aramo TS 2 apparatus. It was found that the addition of rutin did not have an influence on the chitosan structure but affected its thermal stability. The roughness of the films was bigger after the addition of rutin to chitosan-based films. Skin elasticity and skin moisturization were somewhat improved after the topical application of the proposed chitosan-rutin mask. The maximum release of rutin was found after 20 min at pH 5.5, related to the pH of normal human skin. The average percentage of release from chitosan-based film containing hyaluronic acid was smaller than from chitosan-based films.

Properties and biotechnological applications of microbial deacetylase

Deacetylases, a class of enzymes that can catalyze the hydrolysis of acetylated substrates to remove the acetyl group, used in producing various products with high qualities, are one of the most influential industrial enzymes. These enzymes are highly specific, non-toxic, sustainable, and eco-friendly biocatalysts. Deacetylases and deacetylated compounds have been widely applicated in pharmaceuticals, medicine, food, and the environment. This review synthetically summarizes deacetylases' sources, characterizations, classifications, and applications. Moreover, the typical structural characteristics of deacetylases from different microbial sources are summarized. We also reviewed the deacetylase-catalyzed reactions for producing various deacetylated compounds, such as chitosan-oligosaccharide (COS), mycothiol, 7-aminocephalosporanic acid (7-ACA), glucosamines, amino acids, and polyamines. It is aimed to expound on the advantages and challenges of deacetylases in industrial applications. Moreover, it also serves perspectives on obtaining promising and innovative biocatalysts for enzymatic deacetylation. KEYPOINTS: • The fundamental properties of microbial deacetylases of various microorganisms are presented. • The biochemical characterizations, structures, and catalyzation mechanisms of microbial deacetylases are summarized. • The applications of microbial deacetylases in food, pharmaceutical, medicine, and the environment were discussed.

Microbial chitin extraction and characterization from green tiger shrimp waste: A comparative study of culture mediums along with bioprocess optimization

This research aims to introduce a low-cost, non-commercial culture medium and optimize the operating conditions for biological chitin extraction from green tiger shrimp waste in the Persian Gulf zone. For this purpose, the two most commonly used microorganisms, Bacillus licheniformis and Lactobacillus plantarum, were obtained to deproteinize and demineralize the shrimp shells within both culture mediums using a successive two-stage process. It was found that the proposed non-commercial culture medium was more efficient than the purchased and ready-to-use commercial medium and increased deproteinization and demineralization efficiency by 9 % and 11 %, respectively. According to the optimization, which was performed using a response surface methodology based on a central composite design, the demineralization model is more complicated than the deproteinization model. The presented model predicted deproteinization and demineralization yields with good accuracy. The FTIR results revealed that shrimp shells and chitin have similar main functional groups, while the degree of acetylation of the extracted chitin was 62.26 %. SEM results illustrated the formation of microfibrils and the chitin structure's porosity. The XRD data showed that the crystallinity index of chitin was 93.9 %. Besides, the thermal stability of the extracted chitin, with a maximum degradation temperature of 380 °C is comparable with the literature data.

Exploring the potential of Halomonas levan and its derivatives as active ingredients in cosmeceutical and skin regenerating formulations

Demand on natural products that contain biological ingredients mimicking growth factors and cytokines made natural polysaccharides popular in pharmaceutical and cosmetic industries. Levan is the β-(2-6) linked, nontoxic, biocompatible, water-soluble, film former fructan polymer that has diverse applications in pharmacy and cosmeceutical industries with its moisturizing, whitening, anti-irritant, anti-aging and slimming activities. Driven by the limited reports on few structurally similar levan polymers, this study presents the first systematic investigation on the effects of structurally different extremophilic Halomonas levan polysaccharides on human skin epidermis cells. In-vitro experiments with microbially produced linear Halomonas levan (HL), its hydrolyzed, (hHL) and sulfonated (ShHL) derivatives as well as enzymatically produced branched levan (EL) revealed increased keratinocyte and fibroblast proliferation (113-118 %), improved skin barrier function through induced expressions of involucrin (2.0 and 6.43 fold changes for HL and EL) and filaggrin (1.74 and 3.89 fold changes for hHL and ShHL) genes and increased type I collagen (2.63 for ShHL) and hyaluronan synthase 3 (1.41 for HL) gene expressions together with fast wound healing ability within 24 h (100 %, HL) on 2D wound models clearly showed that HL and its derivatives have high potential to be used as natural active ingredients in cosmeceutical and skin regenerating formulations.

Chitosan/snail slime films as multifunctional platforms for potential biomedical and cosmetic applications: physical and chemical characterization

Due to the pollution problem, the use of more sustainable materials with a reduced environmental impact, spanning across biocompatible and biodegradable polymers, is growing worldwide in many different fields, particularly when referring to applications in Life Sciences. Accordingly, with the aim of developing multifunctional materials for potential cosmetic/biomedical purposes, this work reports the physical and chemical characterization of chitosan-based films blended with snail slime, exhibiting antioxidant and sunscreen features. A suitable formulation for preparing free-standing chitosan platforms, mixing low molecular weight chitosan, lactic acid, glycerol, and snail slime into an appropriate ratio, is thus described. The results obtained by morphological analysis and ATR-FTIR spectroscopy, XRD, swelling analysis (also when varying pH, ionic strength, and temperature), and WVTR measurements evidence a uniform distribution of snail slime inside the chitosan network, forming more compacted structures. At first, the UV-Vis analysis is used to investigate the theoretical Sun Protection Factor, finding that these innovative platforms can be used for preventing sunburn. Then, the antioxidant features are investigated using the ABTS assay, displaying a snail slime-mediated and dose-dependent boosted activity.

Chitosan-based packaging films with an integrated antimicrobial peptide: Characterization, in vitro release and application to fresh pork preservation

Chitosan (CS) films were developed incorporating peptide HX-12C. The films were studied to determine their microstructures, physical properties, release properties of peptide HX-12C and functional properties. The results indicated that there may be hydrogen bonding interactions between CS and peptide HX-12C, thereby creating a homogeneous internal microstructure and lower crystallinity (10.8-12.8 %). Compared with CS film, CS-HX-12C films displayed lower light transmission, MC (20.8-19.9 %), WVP (8.82-8.59 × 10^-11·g·m^-1·s^-1·Pa^-1), OTR (0.015-0.037 cc/(m².day)) and higher WS (15.7-32.4 %) values. Moreover, controlled-release experiments showed that pH, ionic strength and temperature could all significantly affect the release of peptide HX-12C from the films. Finally, the increase of pH value and TVC and lipid oxidation of fresh pork were delayed due to the treatment with CS-2%HX-12C film. However, incorporating peptide HX-12C into CS films did not improve the mechanical properties of the films and their effects against protein oxidation. Our results suggest that the CS-based antimicrobial packaging films integrated with peptide HX-12C exhibit the potential for fresh pork preservation.

Recent Advances in Chitosan-Based Applications-A Review

Chitosan derived from chitin gas gathered much interest as a biopolymer due to its known and possible broad applications. Chitin is a nitrogen-enriched polymer abundantly present in the exoskeletons of arthropods, cell walls of fungi, green algae, and microorganisms, radulae and beaks of molluscs and cephalopods, etc. Chitosan is a promising candidate for a wide variety of applications due to its macromolecular structure and its unique biological and physiological properties, including solubility, biocompatibility, biodegradability, and reactivity. Chitosan and its derivatives have been known to be applicable in medicine, pharmaceuticals, food, cosmetics, agriculture, the textile and paper industries, the energy industry, and industrial sustainability. More specifically, their use in drug delivery, dentistry, ophthalmology, wound dressing, cell encapsulation, bioimaging, tissue engineering, food packaging, gelling and coating, food additives and preservatives, active biopolymeric nanofilms, nutraceuticals, skin and hair care, preventing abiotic stress in flora, increasing water availability in plants, controlled release fertilizers, dye-sensitised solar cells, wastewater and sludge treatment, and metal extraction. The merits and demerits associated with the use of chitosan derivatives in the above applications are elucidated, and finally, the key challenges and future perspectives are discussed in detail.

Development of a New Route for the Immobilization of Unmodified Single-Stranded DNA on Chitosan Beads and Detection of Released Guanine after Hydrolysis

In this work, chitosan beads were used as a cost-effective platform for the covalent immobilization of unmodified single-stranded DNA, using glutaraldehyde as a cross-linking agent. The immobilized DNA capture probe was hybridized in the presence of miRNA-222 as a complementary sequence. The target was evaluated based on the electrochemical response of the released guanine, using hydrochloride acid as a hydrolysis agent. Differential pulse voltammetry technique and screen-printed electrodes modified with COOH-functionalized carbon black were used to monitor the released guanine response before and after hybridization. The functionalized carbon black provided an important signal amplification of guanine compared to the other studied nanomaterials. Under optimal conditions (6 M HCl at 65 °C for 90 min), an electrochemical-based label-free genosensor assay exhibited a linear range between 1 nM and 1 µM of miRNA-222, with a detection limit of 0.2 nM of miRNA-222. The developed sensor was successfully used to quantify miRNA-222 in a human serum sample.

Chitosan Based Materials in Cosmetic Applications: A Review

This review provides a report on the properties and recent advances in the application of chitosan and chitosan-based materials in cosmetics. Chitosan is a polysaccharide that can be obtained from chitin via the deacetylation process. Chitin most commonly is extracted from cell walls in fungi and the exoskeletons of arthropods, such as crustaceans and insects. Chitosan has attracted significant academic interest, as well as the attention of the cosmetic industry, due to its interesting properties, which include being a natural humectant and moisturizer for the skin and a rheology modifier. This review paper covers the structure of chitosan, the sources of chitosan used in the cosmetic industry, and the role played by this polysaccharide in cosmetics. Future aspects regarding applications of chitosan-based materials in cosmetics are also mentioned.

Synthesis and Characterization of Curcumin-Chitosan Loaded Gold Nanoparticles by Oryctes rhinoceros' Chitin for Cosmeceutical Application

A breakthrough in cosmeceuticals by utilizing insects as major ingredients in cosmetic products is gaining popularity. Therefore, the interest in rare sources of ingredients, for instance, from the Oryctes rhinoceros beetle, can bring huge benefits in terms of turning pests into wealth. In this study, curcumin was chosen as the active ingredient loaded into chitosan-gold nanoparticles (CCG-NP). Curcumin is unstable and has poor absorption, a high rate of metabolism, and high sensitivity to light. These are all factors that contribute to the low bioavailability of any substance to reach the target cells. Therefore, chitosan extracted from O. rhinoceros could be used as a drug carrier to overcome these limitations. In order to overcome these limitations, CCG-NPs were synthesized and characterized. Chitosan was isolated from O. rhinoceros and CCG-NPs were successfully synthesized at 70 °C for 60 min under optimal conditions of a reactant ratio of 2:0.5 (0.5 mM HAuCl4: 0.1% curcumin). Characterizations of CCG-NP involved FTIR analysis, zeta potential, morphological properties determination by FE-SEM, particle size analysis, crystallinity study by XRD, and elemental analysis by EDX. The shape of the CCG-NP was round, its size was 128.27 d.nm, and the value of the zeta potential was 20.2 ± 3.81 mV. The IC50 value for cell viability is 58%, indicating a mild toxicity trait. To conclude, CCG-NP is a stable, spherical, nano-sized, non-toxic, and homogeneous solution.

Chitin and Chitosan as Polymers of the Future-Obtaining, Modification, Life Cycle Assessment and Main Directions of Application

Natural polymers are very widespread in the world, which is why it is so important to know about the possibilities of their use. Chitin is the second most abundant reproducible natural polymer in nature; however, it is insoluble in water and basic solvents. Chitin is an unused waste of the food industry, for which there are possibilities of secondary management. The research led to obtaining a soluble, environmentally friendly form of chitin, which has found potential applications in the many fields, e.g., medicine, cosmetics, food and textile industries, agriculture, etc. The deacetylated form of chitin, which is chitosan, has a number of beneficial properties and wide possibilities of modification. Modification possibilities mean that we can obtain chitosan with the desired functional properties, facilitating, for example, the processing of this polymer and expanding the possibilities of its application, also as biomimetic materials. The review contains a rich description of the possibilities of modifying chitin and chitosan and the main directions of their application, and life cycle assessment (LCA)-from the source of the polymer through production materials to various applications with the reduction of waste.

Biomaterials Based on Chitosan and Polyvinyl Alcohol as a Drug Delivery System with Wound-Healing Effects

The excellent biological properties of chitosan (CS) together with the increased oxygen permeability of polyvinyl alcohol (PVA) were the prerequisites for the creation of a wound healing dressing that would also function as a system for L-arginine (L-arg) and caffeine (Caff) delivery. Using the freezing/thawing method, 12 hydrogels were obtained in PVA:CS polymer ratios of 90:10, 75:25, and 60:40, and all were loaded with L-arg, Caff, and the mixture of L-arg and Caff, respectively. Afterwards, an inorganic material (zeolite-Z) was added to the best polymeric ratio (75:25) and loaded with active substances. The interactions between the constituents of the hydrogels were analyzed by FTIR spectroscopy, the uniformity of the network was highlighted by the SEM technique, and the dynamic water vapor sorption capacity was evaluated. In the presence of the inorganic material, the release profile of the active substances is delayed, and in vitro permeation kinetics proves that the equilibrium state is not reached even after four hours. The synergy of the constituents in the polymer network recommends that they be used in medical applications, such as wound healing dressings.

Chitosan Superabsorbent Biopolymers in Sanitary and Hygiene Applications

The consumption of diapers and sanitary products has constantly been rising. Several problems are associated with using chemical-based sanitary products, which are difficult to degrade easily and cause nappy rash and bacterial infections in babies. Therefore, there is an increasing shift towards natural-based sanitary products because of their biodegradability, non-toxicity, and biocompatibility. Several studies are being carried out in which researchers have incorporated natural polymers, such as cellulose, starch, alginate, and xantham gum for producing superabsorbent materials. Chitosan (CS) is one such natural polymer that exhibits anti-microbial activity because of the functional groups present in its structure. Moreover, it is also easily available, biodegradable, and non-toxic. This review mainly focuses on CS’s properties and several approaches to synthesizing natural polymer-based superabsorbent products, such as sanitary pads and diapers. It also briefly discusses the diversified applications of CS as a biopolymer in the cosmetic, medical, food, and textile industries. In addition, this study implies using CS as a superabsorbent biopolymer in the manufacturing and producing sanitary products for women and children. Due to the excellent water retention capacity, swelling ability, and anti-microbial activity exhibited by CS can be considered a potential candidate for producing superabsorbent biopolymers.

A New Mediterranean Flour Moth-Derived Chitosan: Characterization and Co-electrospun Hybrid Fabrication

In this study, the chitin of adult Mediterranean flour moth (Ephestia kuheniella) (Cht) was extracted and then converted to chitosan by deacetylation process to achieve the chitosan derived from E. kuheniella (Chs_fm). The new chitosan-based scaffold was produced using the polyvinyl alcohol (PVA) co-electrospinning technique. The degree of deacetylation was obtained using the distillation-titration and Fourier transform infrared spectroscopy. The surface morphology and crystallinity index of Chs_fm were observed using scanning electron microscopy and X-ray diffraction analysis, respectively, and compared with the commercial chitosan (Chs_c). Thermogravimetric analysis was used to estimate two chitosans' water content and thermal stability. The average molecular mass analysis was performed using viscometry. Moreover, the minimum inhibitory concentration and DPPH assay were used to study the antimicrobial activity and antioxidant potential of the Chs_fm, respectively. Accordingly, Chs_fm was smoother with fewer pores and flakes than Chs_c, and its crystallinity index was higher than Chs_c. The water content and thermal stability were lower and similar for Chs_fm compared to Chs_c. The average molecular mass of Chs_fm was ~ 5.8 kDa, making it classified as low molecular weight chitosan. The antimicrobial activity of Chs_fm against a representative Gram-negative bacteria; E. coli resulted to be the same as Chs_c. However, less effective than Chs_c against a representative Gram-positive bacteria is S. aureus. The Chs_fm/PVA ratio scaffold was optimized at 30:70 to fabricate a uniform nanofiber scaffold.

Potential Cosmetic Active Ingredients Derived from Marine By-Products

The market demand for marine-based cosmetics has shown a tremendous growth rate in the last decade. Marine resources represent a promising source of novel bioactive compounds for new cosmetic ingredient development. However, concern about sustainability also becomes an issue that should be considered in developing cosmetic ingredients. The fisheries industry (e.g., fishing, farming, and processing) generates large amounts of leftovers containing valuable substances, which are potent sources of cosmeceutical ingredients. Several bioactive substances could be extracted from the marine by-product that can be utilized as a potent ingredient to develop cosmetics products. Those bioactive substances (e.g., collagen from fish waste and chitin from crustacean waste) could be utilized as anti-photoaging, anti-wrinkle, skin barrier, and hair care products. From this perspective, this review aims to approach the potential active ingredients derived from marine by-products for cosmetics and discuss the possible activity of those active ingredients in promoting human beauty. In addition, this review also covers the prospect and challenge of using marine by-products toward the emerging concept of sustainable blue cosmetics.