Polyhydroxyalkanoates (PHAs): Biopolymers for Biofuel and Biorefineries

Exploring polyhydroxyalkanoates biosynthesis using hydrocarbons as carbon source: a comprehensive review

Environmental pollution caused by petrochemical hydrocarbons (HC) and plastic waste is a pressing global challenge. However, there is a promising solution in the form of bacteria that possess the ability to degrade HC, making them valuable tools for remediating contaminated environments and effluents. Moreover, some of these bacteria offer far-reaching potential beyond bioremediation, as they can also be utilized to produce polyhydroxyalkanoates (PHAs), a common type of bioplastics. The accumulation of PHAs in bacterial cells is facilitated in environments with high C/N or C/P ratio, which are often found in HC-contaminated environments and effluents. Consequently, some HC-degrading bacteria can be employed to simultaneously produce PHAs and conduct biodegradation processes. Although bacterial bioplastic production has been thoroughly studied, production costs are still too high compared to petroleum-derived plastics. This article aims to provide a comprehensive review of recent scientific advancements concerning the capacity of HC-degrading bacteria to produce PHAs. It will delve into the microbial strains involved and the types of bioplastics generated, as well as the primary pathways for HC biodegradation and PHAs production. In essence, we propose the potential utilization of HC-degrading bacteria as a versatile tool to tackle two major environmental challenges: HC pollution and the accumulation of plastic waste. Through a comprehensive analysis of strengths and weaknesses in this aspect, this review aims to pave the way for future research in this area, with the goal of facilitating and promoting investigation in a field where obtaining PHAs from HC remains a costly and challenging process.

Biopolymer Compositions Based on Poly(3-hydroxybutyrate) and Linear Polyurethanes with Aromatic Rings-Preparation and Properties Evaluation

Polymer biocompositions of poly(3-hydroxybutyrate) (P3HB) and linear polyurethanes (PU) with aromatic rings were produced by melt-blending at different P3HB/PU weight ratios (100/0, 95/5, 90/10, and 85/15). Polyurethanes have been prepared with 4,4'-diphenylmethane diisocyanate and polyethylene glycols with molar masses of 400 g/mol (PU400), 1000g/mol (PU1000), and 1500 g/mol (PU1500). The compatibility and morphology of the obtained polymer blends were determined by infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The effect of the polyurethane content in the biocompositions on their thermal stability and mechanical properties was investigated and compared with those of the native P3HB. It was shown that increasing the PU content in P3HB-PU compositions to 10 wt.% leads to an improvement in the mentioned properties. The obtained results demonstrated that the thermal stability and mechanical properties of P3HB were improved, particularly in terms of increasing the degradation temperature, reducing hardness, and increasing impact strength. The best thermal and mechanical properties were shown by the P3HB-PU polymer compositions containing 10 wt.% of polyurethane modifiers, especially PU1000, which was also confirmed by the morphology analysis of these biocompositions. The presence of polyurethanes in the resulting polymer biocomposites decreases their glass transition temperatures, i.e., makes the materials more flexible. The resulting polymer biocompositions have suitable mechanical properties and thermal properties within the processing conditions for the predicted application as biodegradable, short-lived products for agriculture.

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from methane and volatile fatty acids: properties, metabolic routes and current trend

Polyhydroxyalkanoates (PHAs) are biobased and biodegradable polymers that could effectively replace fossil-based and non-biodegradable plastics. However, their production is currently limited by the high production costs, mainly due to the costly carbon sources used, low productivity and quality of the materials produced. A potential solution lies in utilizing cheap and renewable carbon sources as the primary feedstock during the biological production of PHAs, paving the way for a completely sustainable and economically viable process. In this review, the opportunities and challenges related to the production of polyhydroxyalkanoates using methane and volatile fatty acids (VFAs) as substrates were explored, with a focus on poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate). The discussion reports the current knowledge about promising Type II methanotrophs, the impact of process parameters such as limiting nutrients, CH4:O2 ratio and temperature, the type of co-substrate and its concentration. Additionally, the strategies developed until now to enhance PHA production yields were also discussed.

Bacteria for Bioplastics: Progress, Applications, and Challenges

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Algae-Based Biopolymers for Batteries and Biofuel Applications in Comparison with Bacterial Biopolymers-A Review

Algae-based biopolymers can be used in diverse energy-related applications, such as separators and polymer electrolytes in batteries and fuel cells and also as microalgal biofuel, which is regarded as a highly renewable energy source. For these purposes, different physical, thermochemical, and biochemical properties are necessary, which are discussed within this review, such as porosity, high temperature resistance, or good mechanical properties for batteries and high energy density and abundance of the base materials in case of biofuel, along with the environmental aspects of using algae-based biopolymers in these applications. On the other hand, bacterial biopolymers are also often used in batteries as bacterial cellulose separators or as biopolymer network binders, besides their potential use as polymer electrolytes. In addition, they are also regarded as potential sustainable biofuel producers and converters. This review aims at comparing biopolymers from both aforementioned sources for energy conversion and storage. Challenges regarding the production of algal biopolymers include low scalability and low cost-effectiveness, and for bacterial polymers, slow growth rates and non-optimal fermentation processes often cause challenges. On the other hand, environmental benefits in comparison with conventional polymers and the better biodegradability are large advantages of these biopolymers, which suggest further research to make their production more economical.

Polyhydroxyalkanoates production in biorefineries: A review on current status, challenges and opportunities

The need for a sustainable and circular bioeconomy model is imperative due to petroleum non-renewability, scarcity and environmental impacts. Biorefineries systems explore biomass to its maximum, being an important pillar for the development of circular bioeconomy. Polyhydroxyalkanoates (PHAs) can take advantage of biorefineries, as they can be produced using renewable feedstocks, and are potential substitutes for petrochemical plastics. The present work aims to evaluate the current status of the industrial development of PHAs production in biorefineries and PHAs contributions to the bioeconomy, along with future development points. Advancements are noticed when PHA production is coupled in wastewater treatment systems, when residues are used as substrate, and also when analytical methodologies are applied to evaluate the production process, such as the Life Cycle and Techno-Economic Analysis. For the commercial success of PHAs, it is established the need for dedicated investment and policies, in addition to proper collaboration of different society actors.

Enhancing poly(3-hydroxybutyrate) production in halophilic bacteria through improved salt tolerance

Polyhydroxyalkanoates (PHA) have emerged as a promising bio-compound in the industrial application due to their potential to replace conventional petroleum-based plastics with sustainable bioplastics. This study focuses on Halomonas sp. YJPS3-3, a halophilic bacterium, and presents a novel approach to enhance PHA production by exploiting its salt tolerance toward PHA biosynthesis. Through gamma irradiation-induced mutants with enhanced salt tolerance from 15% NaCl to 20% NaCl, mutant halo6 showing a significant 11% increase in PHA yield, was achieved. Moreover, the mutants displayed not only higher PHA content but also remarkable cell morphology with elongation. In addition, this research unravels the genetic determinants behind the elevated PHA content and identifies a corresponding shift in fatty acid composition favoring PHA accumulation. This novel mutant obtained from gamma irradiation with enhanced salt tolerance in halophilic bacteria opens up new avenues not only for the bioplastic industry but also for applications in the production of high-value metabolites.

Production and characterization of polyhydroxyalkanoates by Halomonas alkaliantarctica utilizing dairy waste as feedstock

Currently, the global demand for polyhydroxyalkanoates (PHAs) is significantly increasing. PHAs are produced by several bacteria that are an alternative source of synthetic polymers derived from petrochemical refineries. This study established a simple and more feasible process of PHA production by Halomonas alkaliantarctica using dairy waste as the only carbon source. The data confirmed that the analyzed halophile could metabolize cheese whey (CW) and cheese whey mother liquor (CWML) into biopolyesters. The highest yield of PHAs was 0.42 g/L in the cultivation supplemented with CWML. Furthermore, it was proved that PHA structure depended on the type of by-product from cheese manufacturing, its concentration, and the culture time. The results revealed that H. alkaliantarctica could produce P(3HB-co-3HV) copolymer in the cultivations with CW at 48 h and 72 h without adding of any precursors. Based on the data obtained from physicochemical and thermal analyses, the extracted copolymer was reported to have properties suitable for various applications. Overall, this study described a promising approach for valorizing of dairy waste as a future strategy of industrial waste management to produce high value microbial biopolymers.

Advanced biofuel production, policy and technological implementation of nano-additives for sustainable environmental management - A critical review

This review article critically evaluates the significance of adopting advanced biofuel production techniques that employ lignocellulosic materials, waste biomass, and cutting-edge technology, to achieve sustainable environmental stewardship. Through the analysis of conducted research and development initiatives, the study highlights the potential of these techniques in addressing the challenges of feedstock supply and environmental impact and implementation policies that have historically plagued the conventional biofuel industry. The integration of state-of-the-art technologies, such as nanotechnology, pre-treatments and enzymatic processes, has shown considerable promise in enhancing the productivity, quality, and environmental performance of biofuel production. These developments have improved conversion methods, feedstock efficiency, and reduced environmental impacts. They aid in creating a greener and sustainable future by encouraging the adoption of sustainable feedstocks, mitigating greenhouse gas emissions, and accelerating the shift to cleaner energy sources. To realize the full potential of these techniques, continued collaboration between academia, industry representatives, and policymakers remains essential.

Comprehensive review on recent production trends and applications of biochar for greener environment

The suitability of biochar as a supplement for environmental restoration varies significantly based on the type of feedstocks used and the parameters of the pyrolysis process. This study comprehensively examines several aspects of biochar's potential benefits, its capacity to enhance crop yields, improve nutrient availability, support the co-composting, water restoration and enhance overall usage efficiency. The supporting mechanistic evidence for these claims is also evaluated. Additionally, the analysis identifies various gaps in research and proposes potential directions for further exploration to enhance the understanding of biochar application. As a mutually advantageous approach, the integration of biochar into agricultural contexts not only contributes to environmental restoration but also advances ecological sustainability. The in-depth review underscores the diverse suitability of biochar as a supplement for environmental restoration, contingent upon the specific feedstock sources and pyrolysis conditions used. However, concerns have been raised regarding potential impacts on human health within agricultural sectors.

Biomaterials-mediated CRISPR/Cas9 delivery: recent challenges and opportunities in gene therapy

The use of biomaterials in delivering CRISPR/Cas9 for gene therapy in infectious diseases holds tremendous potential. This innovative approach combines the advantages of CRISPR/Cas9 with the protective properties of biomaterials, enabling accurate and efficient gene editing while enhancing safety. Biomaterials play a vital role in shielding CRISPR/Cas9 components, such as lipid nanoparticles or viral vectors, from immunological processes and degradation, extending their effectiveness. By utilizing the flexibility of biomaterials, tailored systems can be designed to address specific genetic diseases, paving the way for personalized therapeutics. Furthermore, this delivery method offers promising avenues in combating viral illnesses by precisely modifying pathogen genomes, and reducing their pathogenicity. Biomaterials facilitate site-specific gene modifications, ensuring effective delivery to infected cells while minimizing off-target effects. However, challenges remain, including optimizing delivery efficiency, reducing off-target effects, ensuring long-term safety, and establishing scalable production techniques. Thorough research, pre-clinical investigations, and rigorous safety evaluations are imperative for successful translation from the laboratory to clinical applications. In this review, we discussed how CRISPR/Cas9 delivery using biomaterials revolutionizes gene therapy and infectious disease treatment, offering precise and safe editing capabilities with the potential to significantly improve human health and quality of life.

Production of short-chain fatty acids (SCFAs) as chemicals or substrates for microbes to obtain biochemicals

Carboxylic acids have become interesting platform molecules in the last years due to their versatility to act as carbon sources for different microorganisms or as precursors for the chemical industry. Among carboxylic acids, short-chain fatty acids (SCFAs) such as acetic, propionic, butyric, valeric, and caproic acids can be biotechnologically produced in an anaerobic fermentation process from lignocellulose or other organic wastes of agricultural, industrial, or municipal origin. The biosynthesis of SCFAs is advantageous compared to chemical synthesis, since the latter relies on fossil-derived raw materials, expensive and toxic catalysts and harsh process conditions. This review article gives an overview on biosynthesis of SCFAs from complex waste products. Different applications of SCFAs are explored and how these acids can be considered as a source of bioproducts, aiming at the development of a circular economy. The use of SCFAs as platform molecules requires adequate concentration and separation processes that are also addressed in this review. Various microorganisms such as bacteria or oleaginous yeasts can efficiently use SCFA mixtures derived from anaerobic fermentation, an attribute that can be exploited in microbial electrolytic cells or to produce biopolymers such as microbial oils or polyhydroxyalkanoates. Promising technologies for the microbial conversion of SCFAs into bioproducts are outlined with recent examples, highlighting SCFAs as interesting platform molecules for the development of future bioeconomy.

Commercialization potential of agro-based polyhydroxyalkanoates biorefinery: A technical perspective on advances and critical barriers

The exponential increase in the use and careless discard of synthetic plastics has created an alarming concern over the environmental health due to the detrimental effects of petroleum based synthetic polymeric compounds. Piling up of these plastic commodities on various ecological niches and entry of their fragmented parts into soil and water has clearly affected the quality of these ecosystems in the past few decades. Among the many constructive strategies developed to tackle this global issue, use of biopolymers like polyhydroxyalkanoates as sustainable alternatives for synthetic plastics has gained momentum. Despite their excellent material properties and significant biodegradability, polyhydroxyalkanoates still fails to compete with their synthetic counterparts majorly due to the high cost associated with their production and purification thereby limiting their commercialization. Usage of renewable feedstocks as substrates for polyhydroxyalkanoates production has been the thrust area of research to attain the sustainability tag. This review work attempts to provide insights about the recent developments in the production of polyhydroxyalkanoates using renewable feedstock along with various pretreatment methods used for substrate preparation for polyhydroxyalkanoates production. Further, the application of blends based on polyhydroxyalkanoates, and the challenges associated with the waste valorization based polyhydroxyalkanoates production strategy is elaborated in this review work.

Avocado seed waste bioconversion into poly(3-hydroxybutyrate) by using Cobetia amphilecti and ethyl levulinate as a green extractant

The avocado processing industry produces up to 1.3M tons of agro-waste annually. Chemical analysis of avocado seed waste (ASW) revealed that it is rich in carbohydrates (464.7 ± 21.4 g kg^-1) and proteins (37.2 ± 1.5 g kg^-1). Optimized microbial cultivation of Cobetia amphilecti using an acid hydrolysate of ASW, generated poly(3-hydroxybutyrate) (PHB) in a 2.1 ± 0.1 g L^-1 concentration. The PHB productivity of C. amphilecti cultivated on ASW extract was 17.5 mg L^-1 h^-1. The process in which a novel ASW substrate was utilized has been further augmented by using ethyl levulinate as a sustainable extractant. This process achieved 97.4 ± 1.9 % recovery yield and 100 ± 1 % purity (measured by TGA, NMR, and FTIR) of the target PHB biopolymer, along with a high and relatively uniform PHB molecular weight (M_w = 1831 kDa, M_n = 1481 kDa, M_w/M_n = 1.24) (measured by gel permeation chromatography), compared to PHB polymer extracted by chloroform (M_w = 389 kDa, M_n = 297 kDa, M_w/M_n = 1.31). This is the first example of ASW utilization as a sustainable and inexpensive substrate for PHB biosynthesis and ethyl levulinate as an efficient and green extractant of PHB from a single bacterial biomass.

Moving towards the Application of Biocatalysis in Food Waste Biorefinery

Waste valorization is an important strategy to reduce environmental pollution and dependency on petroleum-based fuels. In this regard, utilization of food waste as a versatile and low-cost resource is important. Several advanced catalytic methods for the valorization of food waste have been widely investigated for the production of liquid biofuels. Along this line, chemical catalysts have been explored for the synthesis of liquid biofuels. Chemo-catalysis is mainly metal based, which requires harsh process conditions. Alternatively, biocatalysts are currently being investigated as a result of several advantages such as mild reaction conditions, recyclability, selectivity and biodegradability. In this work, recent biocatalytic technologies for the preparation of liquid biofuels through food waste valorization are discussed thoroughly. Lipases are employed for the synthesis of biodiesel and the upgradation of bio-oil, whereas methane mono-oxygenases could be explored for the production of methanol via the oxidation of methane generated from food wastes. Industrial production of ethanol from food waste using bioconversion technologies is a success story. To date, there has been no specific report on the use of food waste for propanol preparation using enzymes. The ABE process (Acetone–Butanol–Ethanol) (using suitable microorganisms) is used for butanol preparation, where the vacuum stripping system is integrated to remove butanol from the broth and circumvent inhibition. The synthesis of hydrocarbon fuels from fatty acids and triglycerides can be carried out using enzymes, such as carboxylic acid reductase and fatty acid photodecarboxylase (an algal photoenzyme). Both carboxylic acid reductase and fatty acid photodecarboxylase have not yet been applied in the direct valorization of food wastes. Furthermore, limitations of the reported methods, societal and economic aspects and a fresh perspective on the subject, along with important examples, are described.

The earth-star basidiomycetous mushroom Astraeus odoratus produces polyhydroxyalkanoates during cultivation on malt extract

Polyhydroxyalkanoates (PHAs) including poly-3-hydroxybutyrate (P3HB) as secondary metabolisms were in vitro produced by the edible basidiomycetous mushroom Astraeus odoratus during its growth on malt agar extract. Various carbon and nitrogen sources containing cellulose, glucose, glycerol, rice straw powder, soybean meal and peptone were investigated for the growth of basidiomycetous mushrooms. During cultivation, the A. odoratus culture exudated the considerably extracellular fluid up to approx. 2.3 ml on 2% malt extract agar plate within 7 days. The chemical compounds of the exudated fluid were further investigated by Fourier-transform infrared spectroscopy (FTIR) and gas chromatography/mass spectrometry (GC/MS); and its morphology of the lyophilized sample was observed by scanning electron microscope (SEM). FTIR results showed the characteristic bands of OH at 3445 cm^-1, CH/CH₂/symmetric CH₃ (stretch) at 2923 and 2852 cm^-1, C=O at 1730 cm^-1, asymmetric CH₃ (bend) at 1454 and 1414 cm^-1, C-O of COO- at 1396 cm^-1 and C-O-C at 1223, 1160, 1116, 1058 and 1019 cm^-1 which were similar to the absorptive characteristics of P3HB. Methyl ester derivatives of GC/MS results identified 7 compounds including: 3-hydroxybutanoic (monomer of PHB), aminobenzoic, salicylic, hexadecenoic, octadecadienoic, octadecenoic and octadecanoic acids. SEM images revealed a fibriform and porous materials. Hence, the occurrence of PHAs was first described in a basidiomycetous mushroom A. odoratus. Thus, PHAs could be found not only in bacteria and but also in basidiomycetous mushroom, which can be promising target for bioplastics and green environmental studies.

Using runaway replication to express polyhydroxyalkanoic acid (pha) genes from a novel marine bacterium in enteric bacteria: The influence of temperature and phasins on PHA accumulation

While plastics have revolutionized our world, plastic waste has serious environmental and economic impacts. Polyhydroxyalkanoic acid (PHA) is a bacterial carbon and energy reserve shown to be both biodegradable and biocompatible and could potentially replace conventional plastics. However, cost-effective mass production remains elusive. Bacteria often accumulate PHA as cytoplasmic granules. PHA synthase creates the PHA polymer from acetoacyl-CoA monomers, while phasins are small multifunctional proteins that are found in abundance on the granule surface. The PHA synthase gene from a novel marine isolate, Vibrio B-18 (or B-18), was placed in the presence or absence of an upstream phasin gene in a runaway replication plasmid using polymerase chain reaction (PCR) technology. Plasmid gene expression may be induced chemically or thermally. Overexpression of the PHA genes was demonstrated by SDS-PAGE analysis, and microscopy was used to detect PHA accumulation in three different enteric bacteria (Escherichia coli, Klebsiella aerogenes, and Shigella flexneri). While the B-18 genes were clearly overexpressed at 41°C, PHA accumulation occurred more readily at the lower (30°C) non-inducing temperature regardless of chemical induction if the phasin gene was present. A mutational analysis confirmed the identity of the start codon for the PHA synthase gene and provided evidence supporting the requirement for phasins to allow for PHA accumulation in the recombinant hosts. The findings described in this study confirm the conclusions obtained from related studies from other laboratories and lend support to the importance of including a phasin gene in addition to the basic genes needed for PHA synthesis and accumulation in recombinant enteric bacteria, such as Escherichia coli, Klebsiella aerogenes, and Shigella flexneri.

Application of the solid-state fermentation process and its variations in PHA production: a review

Solid-state fermentation (SSF) is a type of fermentation process with potential to use agro-industrial by-products as a carbon source. Nonetheless, there are few studies evaluating SSF compared to submerged fermentation (SmF) to produce polyhydroxyalkanoates (PHAs). Different methodologies are available associating the two processes. In general, the studies employ a 1st step by SSF to hydrolyze the agro-industrial by-products used as a carbon source, and a 2nd step to produce PHA that can be carried out by SmF or SSF. This paper reviewed and compared the different methodologies described in the literature to assess their potential for use in PHA production. The studies evaluated showed that highest PHA yields (86.2% and 82.3%) were achieved by associating SSF and SmF by Cupriavidus necator. Meanwhile, in methodologies using only SSF, Bacillus produced the highest yields (62% and 56.8%). Since PHA (%) does not necessarily represent a higher production by biomass, the productivity parameter was also compared between studies. We observed that the highest productivity results did not necessarily represent the highest PHA (%). C. necator presented the highest PHA yields associating SSF and SmF, however, is not the most suitable microorganism for PHA production by SSF. Concomitant use of C. necator and Bacillus is suggested for future studies in SSF. Also, it discusses the lack of studies on the association of the two fermentation methodologies, and on the scaling of SSF process for PHA production. In addition to demonstrating the need for standardization of results, for comparison between different methodologies.

Novel Production Methods of Polyhydroxyalkanoates and Their Innovative Uses in Biomedicine and Industry

Polyhydroxyalkanoate (PHA), a biodegradable polymer obtained from microorganisms and plants, have been widely used in biomedical applications and devices, such as sutures, cardiac valves, bone scaffold, and drug delivery of compounds with pharmaceutical interests, as well as in food packaging. This review focuses on the use of polyhydroxyalkanoates beyond the most common uses, aiming to inform about the potential uses of the biopolymer as a biosensor, cosmetics, drug delivery, flame retardancy, and electrospinning, among other interesting uses. The novel applications are based on the production and composition of the polymer, which can be modified by genetic engineering, a semi-synthetic approach, by changing feeding carbon sources and/or supplement addition, among others. The future of PHA is promising, and despite its production costs being higher than petroleum-based plastics, tools given by synthetic biology, bioinformatics, and machine learning, among others, have allowed for great production yields, monomer and polymer functionalization, stability, and versatility, a key feature to increase the uses of this interesting family of polymers.

Utilization of Polymeric Materials toward Sustainable Biodiesel Industry: A Recent Review

The biodiesel industry is expanding rapidly in accordance with the high energy demand and environmental deterioration related to the combustion of fossil fuel. However, poor physicochemical properties and the malperformance of biodiesel fuel still concern the researchers. In this flow, polymers were introduced in biodiesel industry to overcome such drawbacks. This paper reviewed the current utilizations of polymers in biodiesel industry. Hence, four utilizing approaches were discussed, namely polymeric biodiesel, polymeric catalysts, cold-flow improvers (CFIs), and stabilized exposure materials. Hydroxyalkanoates methyl ester (HAME) and hydroxybutyrate methyl ester (HBME) are known as polymeric biodiesel sourced from carbon-enriched polymers with the help of microbial activity. Based on the literature, the highest HBME yield was 70.7% obtained at 10% H2SO4 ratio in methanol, 67 °C, and 50 h. With increasing time to 60 h, HAME highest yield was reported as 68%. In addition, polymers offer wide range of esterification/transesterification catalysts. Based on the source, this review classified polymeric catalysts as chemically, naturally, and waste derived polymeric catalysts. Those catalysts proved efficiency, non-toxicity, economic feasibility, and reusability till the 10th cycle for some polymeric composites. Besides catalysis, polymers proved efficiency to enhance the biodiesel flow-properties. The best effect reported in this review was an 11 °C reduction for the pour point (PP) of canola biodiesel at 1 wt% of ethylene/vinyl acetate copolymers and cold filter plugging point (CFPP) of B20 waste oil biodiesel at 0.08 wt% of EVA copolymer. Polymeric CFIs have the capability to modify biodiesel agglomeration and facilitate flowing. Lastly, polymers are utilized for storage tanks and auto parts products in direct contact with biodiesel. This approach is completely exclusive for polymers that showed stability toward biodiesel exposure, such as polyoxymethylene (POM) that showed insignificant change during static immersion test for 98 days at 55 °C. Indeed, the introduction of polymers has expanded in the biodiesel industry to promote green chemistry.

Low-Denaturazing Glucose Oxidase Immobilization onto Graphite Electrodes by Incubation in Chitosan Solutions

In this work, glucose oxidase (GOx) has been immobilized onto graphite rod electrodes through an assisted-chitosan adsorption reaching an enzyme coverage of 4 nmol/cm2. The direct and irreversible single adsorption of the Flavine Adenine Dinucleotide (FAD) cofactor has been minimized by electrode incubation in a chitosan (CH) solution containing the enzyme GOx. Chitosan keeps the enzyme structure and conformation due to electrostatic interactions preventing FAD dissociation from the protein envelope. Using chitosan, both the redox cofactor FAD and the protein envelope remain in the active form as demonstrated by the electrochemistry studies and the enzymatic activity in the electrochemical oxidation of glucose up to a concentration of 20 mM. The application of the modified electrodes for energy harvesting delivered a power density of 119 µW/cm2 with a cell voltage of 0.3 V. Thus, chitosan presents a stabilizing effect for the enzyme conformation promoted by the confinement effect in the chitosan solution by electrostatic interactions. Additionally, it facilitated the electron transfer from the enzyme to the electrode due to the presence of embedded chitosan in the enzyme structure acting as an electrical wiring between the electrode and the enzyme (electron transfer rate constant 2.2 s−1). This method involves advantages compared with previously reported chitosan immobilization methods, not only due to good stability of the enzyme, but also to the simplicity of the procedure that can be carried out even for not qualified technicians which enable their easy implementation in industry.

Turning mannitol-rich agricultural waste to poly(3-hydroxybutyrate) with Cobetia amphilecti fermentation and recovery with methyl levulinate as a green solvent

The present study explored the use of mannitol and mannitol-rich agro-industrial wastes as substrates for PHB production by Cobetia amphilecti isolated from the green Ulva sp. seaweed. Cultivation of C. amphilecti on mannitol, celery, and olive leaves (OLs) waste led to 4.20, 6.00, and 5.16 g L^-1 of cell dry mass (CDM), 76.3, 25.5, and 12.0% of PHB content in CDM and 3.2, 1.53, and 0.62 g L^-1 of PHB concentration, respectively; which suggested that they can be exploited as carbon substrates for the production of PHB. Extraction of PHB from C. amphilecti cultures by solubilization in the green solvent methyl levulinate (ML) (2% w/w, 140 °C, 1 h) indicated that the recovery yield and purity of PHB are above 97 and 90% w/w, respectively. The use of ML could be an attractive method for the recovery of PHB when safe and non-toxic solvents are required.

Polyhydroxyalkanoates, the bioplastics of microbial origin: Properties, biochemical synthesis, and their applications

The rising plastic pollution deteriorates the environment significantly as these petroleum-based plastics are not biodegradable, and their production requires natural fuels (energy source) and other resources. Polyhydroxyalkanoates (PHAs) are bioplastic and a sustainable and eco-friendly alternative to synthetic plastics. PHAs can be entirely synthesized using various microorganisms such as bacteria, algae, and fungi. These value-added biopolymers show promising properties such as enhanced biodegradability, biocompatibility, and other chemo-mechanical properties. Further, it has been established that the properties of PHA polymers depend on the substrates and chemical composition (monomer unit) of these polymers. PHAs hold great potential as an alternative to petroleum-based polymers, and further research for economic production and utilization of these biopolymers is required. The review describes the synthesis mechanism and different properties of microbially synthesized PHAs for various applications. The classification of PHAs and the multiple techniques necessary for their detection and evaluation have been discussed. In addition, the synthesis mechanism involving the genetic regulation of these biopolymers in various microbial groups has been described. This review provides information on various commercially available PHAs and their application in multiple sectors. The industrial production of these microbially synthesized polymers and the different extraction methods have been reviewed in detail. Furthermore, the review provides an insight into the potential applications of this biopolymer in environmental, industrial, and biomedical applications.

Reductive depolymerization of polyesters and polycarbonates with hydroboranes by using a lanthanum(III) tris(amide) catalyst

The homogeneous reductive depolymerization of polyesters and polycarbonates with hydroboranes is achieved with the use of an f-metal complex catalyst. These polymeric materials are transformed into their value-added alcohol equivalents. Catalysis proceeds readily, under mild conditions, with La[N(SiMe₃)₂]₃ (1 mol%) and pinacolborane (HBpin) and shows high selectivity towards alcohols and diols, after hydrolysis.

Valorisation of waste cooking oil using mixed culture into short- and medium-chain length polyhydroxyalkanoates: Effect of concentration, temperature and ammonium

The production of polyhydroxyalkanoates (PHAs) from waste cooking oil (WCO) by a mixed culture was investigated in the present study at increasing WCO concentrations, temperature and ammonium availability. The PHA production was done in two steps: in the first step, a mixed culture was enriched in PHA-accumulating bacteria from activated sludge in a sequencing batch reactor operated in a feast-famine mode and in the second step the PHA accumulation by the enriched mixed culture was assessed in a batch reactor. In the enrichment step, two substrates, WCO and nonanoic acid were used for enrichment and in the PHA accumulation step only WCO was used. It was not possible to enrich a mixed culture in PHA-accumulating bacteria using WCO as substrate due to the development of filamentous bacteria causing foam formation and bulking in the reactor. However, our results showed that the mixed culture continuously fed with nonanoic acid was enriched in PHA-accumulating bacteria. This enriched culture accumulated both scl- and mcl-PHA using WCO as substrate. The maximum PHA accumulation capacity of this mixed culture from WCO was 38.2% cdw. Increasing the temperature (30-40 ℃) or WCO concentrations (5-20 g/l) increased the PHA accumulation capacity of the mixed culture and the ratios of scl-PHA to mcl-PHA. The presence of ammonium increased PHA accumulation (21.9% cdw) compared to the complete absence of ammonium (5.8% cdw). The thermal characterization of the PHA exhibited the advantageous properties of both scl- and mcl-PHA, i.e., higher melting temperature (152-172 ℃) similar to scl-PHA and a lower degree of crystallinity (12%) similar to mcl-PHA. This is the first study to report the potential of open mixed culture to produce scl- and mcl-PHA from WCO and thus contributing to the understanding of sustainable polymer production.

Hydrothermal Liquefaction of Biomass as One of the Most Promising Alternatives for the Synthesis of Advanced Liquid Biofuels: A Review

The use of biofuels offers advantages over existing fuels because they come from renewable sources, they are biodegradable, their storage and transport are safer, and their emissions into the atmosphere are lower. Biomass is one of the most promising sustainable energy sources with a wide variety of organic materials as raw material. Chemical, biochemical, and thermochemical methods have been proposed to obtain biofuels from raw materials from biomass. In recent years, a thermochemical method that has generated great interest is hydrothermal liquefaction. In this paper, a brief review of the main sources for liquid biofuels and the synthesis processes is presented, with special emphasis on the production of biofuels using hydrothermal liquefaction by using waste generated by human activity as raw material.

Polyhydroxyalkanoate/Antifungal Polyene Formulations with Monomeric Hydroxyalkanoic Acids for Improved Antifungal Efficiency

Novel biodegradable and biocompatible formulations of "old" but "gold" drugs such as nystatin (Nys) and amphotericin B (AmB) were made using a biopolymer as a matrix. Medium chain length polyhydroxyalkanoates (mcl-PHA) were used to formulate both polyenes (Nys and AmB) in the form of films (~50 µm). Thermal properties and stability of the materials were not significantly altered by the incorporation of polyenes in mcl-PHA, but polyene containing materials were more hydrophobic. These formulations were tested in vitro against a panel of pathogenic fungi and for antibiofilm properties. The films containing 0.1 to 2 weight % polyenes showed good activity and sustained polyene release for up to 4 days. A PHA monomer, namely 3-hydroxydecanoic acid (C10-OH), was added to the films to achieve an enhanced synergistic effect with polyenes against fungal growth. Mcl-PHA based polyene formulations showed excellent growth inhibitory activity against both Candida yeasts (C. albicans ATCC 1023, C. albicans SC5314 (ATCC MYA-2876), C. parapsilosis ATCC 22019) and filamentous fungi (Aspergillus fumigatus ATCC 13073; Trichophyton mentagrophytes ATCC 9533, Microsporum gypseum ATCC 24102). All antifungal PHA film preparations prevented the formation of a C. albicans biofilm, while they were not efficient in eradication of mature biofilms, rendering them suitable for the transdermal application or as coatings of implants.

Microbial cell factories for the production of polyhydroxyalkanoates

Pollution caused by persistent petro-plastics is the most pressing problem currently, with 8 million tons of plastic waste dumped annually in the oceans. Plastic waste management is not systematized in many countries, because it is laborious and expensive with secondary pollution hazards. Bioplastics, synthesized by microorganisms, are viable alternatives to petrochemical-based thermoplastics due to their biodegradable nature. Polyhydroxyalkanoates (PHAs) are a structurally and functionally diverse group of storage polymers synthesized by many microorganisms, including bacteria and Archaea. Some of the most important PHA accumulating bacteria include Cupriavidus necator, Burkholderia sacchari, Pseudomonas sp., Bacillus sp., recombinant Escherichia coli, and certain halophilic extremophiles. PHAs are synthesized by specialized PHA polymerases with assorted monomers derived from the cellular metabolite pool. In the natural cycle of cellular growth, PHAs are depolymerized by the native host for carbon and energy. The presence of these microbial PHA depolymerases in natural niches is responsible for the degradation of bioplastics. Polyhydroxybutyrate (PHB) is the most common PHA with desirable thermoplastic-like properties. PHAs have widespread applications in various industries including biomedicine, fine chemicals production, drug delivery, packaging, and agriculture. This review provides the updated knowledge on the metabolic pathways for PHAs synthesis in bacteria, and the major microbial hosts for PHAs production. Yeasts are presented as a potential candidate for industrial PHAs production, with their high amenability to genetic engineering and the availability of industrial-scale technology. The major bottlenecks in the commercialization of PHAs as an alternative for plastics and future perspectives are also critically discussed.