A Systematic Study on the Degradation Products Generated from Artificially Aged Microplastics

Plastic breath: Quantification of microplastics and polymer additives in airborne particles

The widespread extensive use of synthetic polymers has led to a substantial environmental crisis caused by plastic pollution, with microplastics detected in various environments and posing risks to both human health and ecosystems. The possibility of plastic fragments to be dispersed in the air as particles and inhaled by humans may cause damage to the respiratory and other body systems. Therefore, there is a particular need to study microplastics as air pollutants. In this study, we tested a combination of analytical pyrolysis, gas chromatography-mass spectrometry, and gas and liquid chromatography-mass spectrometry to identify and quantify both microplastics and their additives in airborne particulate matter and settled dust within a workplace environment: a WEEE treatment plant. Using this combined approach, we were able to accurately quantify ten synthetic polymers and eight classes of polymer additives. The identified additives include phthalates, adipates, citrates, sebacates, trimellitates, benzoates, organophosphates, and newly developed brominated flame retardants.

Environmental Markers of Plastics and Microplastics

The slow reaction rates to chemical and photochemical degradation are well-known properties of plastics. However, large plastic surfaces exposed to environmental conditions release particles and compounds that affect ecosystems and human health. The aim of this work was to identify compounds associated with the degradation of polyethylene (PE), polystyrene (PS), and polyvinyl chloride (PVC) microplastics (markers) on silica and sand and evaluate their use to screen microplastics on natural sand. Products were identified by using targeted and untargeted LC-HRMS analysis. All polymers underwent chemical oxidation on silica. PE released dicarboxylic acids (HO2C-(CH2)n-CO2H (n = 4-30), while PS released cis/trans-chalcone, trans-dypnone, 3-phenylpropiophenone, and dibenzoylmethane. PVC released dicarboxylic acids and aromatic compounds. Upon irradiation, PE was stable while PS released the same compounds as under chemical oxidation but at lower yields. Under the above condition, PVC generated HO2C-[CH2-CHCl]n-CH2-CO2H and HO2C-[CH2-CHCl]n-CO2H (n = 2-19) dicarboxylic acids. The same products were detected on sand but at a lower concentration than on silica due to better retention within the pores. Detection of markers of PE and PS on natural sand allowed us to screen microplastics by following a targeted analysis. Markers of PVC were not detected before or after thermal/photo-oxidation due to the low release of compounds and limitations associated with surface exposure/penetration of radiation.

An insight decipher on photocatalytic degradation of microplastics: Mechanism, limitations, and future outlook

Plastic material manufacturing and buildup over the past 50 years has significantly increased pollution levels. Microplastics (MPs) and non-biodegradable residual plastic films have become the two most pressing environmental issues among the numerous types of plastic pollution. These tiny plastic flakes enter water systems from a variety of sources, contaminating the water. Since MPs can be consumed by people and aquatic species and eventually make their way into the food chain, their presence in the environment poses a serious concern. Traditional technologies can remove MPs to some extent, but their functional groups, stable covalent bonds, and hydrophobic nature make them difficult to eliminate completely. The urgent need to develop a sustainable solution to the worldwide contamination caused by MPs has led to the exploration of various techniques. Advanced oxidation processes (AOPs) such as photo-catalytic oxidation, photo-degradation, and electrochemical oxidation have been investigated. Among these, photocatalysis stands out as the most promising method for degrading MPs. Photocatalysis is an environmentally friendly process that utilizes light energy to facilitate a chemical reaction, breaking down MPs into carbon dioxide and water-soluble hydrocarbons under aqueous conditions. In photocatalysis, semiconductors act as photocatalysts by absorbing energy from a light source, becoming excited, and generating reactive oxygen species (ROS). These ROS, including hydroxyl radicals (•OH) and superoxide ions ( [Formula: see text] ), play a crucial role in the degradation of MPs. This extensive review provides a detailed exploration of the mechanisms and processes underlying the photocatalytic removal of MPs, emphasizing its potential as an efficient and environmentally friendly approach to address the issue of plastic pollution.

Effects of microplastics on microbial community dynamics in sediments from the Volturno River ecosystem, Italy

In this study, the sources, abundance, and ecological implications of microplastic (MP) pollution in Volturno, one of the main rivers in southern Italy, were explored by investigating the MP concentration levels in sediments collected along the watercourse. The samples were sieved through 5- and 2-mm sieves and treated with selective organic solvents. The polymer classes polystyrene (PS), polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polycarbonate (PC), nylon 6 (PA6), and nylon 6,6 (PA66) were quantified using pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) and high-performance liquid chromatography (HPLC). Furthermore, a 16S rRNA metagenomic analysis was performed using next-generation sequencing in Ion Torrent™ to explore the bacterial taxonomy and ecological dynamics of sediment samples. The MPs were detected in all samples collected from the study area. PP and PET were the most abundant and frequently detected polymer types in the analysed samples. The total MP concentration ranged from 1.05 to 14.55 ppm (parts per million), identifying two distinct data populations: high- and low-MP-contaminated sediments. According to the Polymer Hazard Index (PHI), MP pollution was categorised as hazard levels III and IV (corresponding to the danger category). Metagenomic data revealed that the presence of MPs significantly affected the abundance of bacterial taxa; Flavobacteraceae and Nocardiaceae, which are known to degrade polymeric substances, were present in high-MP-contaminated sediments. This study provides new insights into the ecological relevance of MP pollution and suggests that microorganisms may serve as biomarkers of MP pollution.

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

Risk assessment framework for microplastic in marine environments

Constantly raising microplastic (MP) contamination of water sources poses a direct threat to the gentle balance of the marine environment. This study focuses on a multifactor hazard evaluation of conventional (polyethylene - PE, polypropylene - PP, and polystyrene - PS) and alternative (polyethylene terephthalate with 25 % or 50 % recycled material and polylactic acid) plastics. The risk assessment framework explored included MP abundance, water acidification potential, surface oxidation, fragmentation, and bacterial growth inhibition. Based on MP monitoring campaigns worldwide, we conclude that PE-based plastics are the most abundant MPs in water samples (comprise up to 82 % the MP in those samples). A year-long weathering experiment showed that PS-based and PP-based plastics were oxidized to a higher extent, resulting in the highest water acidification with pH reduction of up to three orders of magnitude. Finally, our laboratory experiments showed that weathered PS was the most fragile plastic during mechanical degradation, while both PP- and PS-based plastic extracts showed a significant growth inhibition toward the marine microorganisms (Bacillus sp. and Pseudoaltermonas sp). Using the examined factors as weighted inputs into our framework, this holistic evaluation of hazards suggest that PP-based plastic products were the most hazardous compared to the other conventional and alternative plastic types.

Eco-Corona Formation on Plastics: Adsorption of Dissolved Organic Matter to Pristine and Photochemically Weathered Polymer Surfaces

Plastic fate in freshwater systems is dependent on particle size, morphology, and physicochemical surface properties (e.g., charge, surface roughness, and hydrophobicity). Environmental aging processes, such as photochemical weathering and eco-corona formation due to dissolved organic matter (DOM) adsorption on plastic surfaces, can alter their physicochemical properties, affecting fate and transport. While plastic aging has been studied from a materials science perspective, its specific implications in environmental contexts remain less understood. Although photochemical weathering and eco-corona formation occur simultaneously in the environment, in this work, we systematically assessed the effects of photochemical weathering on the physicochemical properties of polymers (polyethylene, polypropylene, polyethylene terephthalate, and polystyrene) and how this influences the adsorption of DOMs (Suwannee River humic acid, fulvic acid, and natural organic matter) relative to pristine polymers. Pristine polymers initially had different and distinct physicochemical surface properties, but upon aging, they became more similar in terms of surface properties. Photochemical weathering resulted in a decrease in polymer film thickness, an increase in surface roughness, and hydrophilicity. DOM adlayers on the polymer surfaces resulted in more comparable wettability, effectively masking the initial polymer properties. Collectively, this study explores the physiochemical changes polymers undergo in laboratory studies mimicking environmental conditions. Understanding these changes is the initial step to rationalizing and predicting processes and interactions such as heteroaggregation that dictate the fate of plastics in the environment.

Exploring the release of hazardous volatile organic compounds from face masks and their potential health risk

Hazardous chemicals released from the petroleum-derived face mask can be inhaled by wearers and cause adverse health effects. Here, we first used headspace solid-phase microextraction coupled with GC-MS to comprehensively analyze the volatile organic compounds (VOCs) released from 26 types of face masks. The results showed that total concentrations and peak numbers ranged from 3.28 to 197 μg/mask and 81 to 162, respectively, for different types of mask. Also, light exposure could affect the chemical composition of VOCs, particularly increasing the concentrations of aldehydes, ketones, organic acids and esters. Of these detected VOCs, 142 substances were matched to a reported database of chemicals associated with plastic packaging; 30 substances were identified by the International Agency for Research on Cancer (IARC) as potential carcinogenic to humans; 6 substances were classified in the European Union as persistent, bioaccumulative, and toxic, or very persistent, very bioaccumulative substance. Reactive carbonyls were ubiquitous in masks, especially after exposure to light. The potential risk of VOCs released from the face masks were then accessed by assuming the extreme scenario that all the VOC residues were released into the breathing air within 3 h. The result showed that the average total concentration of VOCs (17 μg/m3) was below the criterion for hygienic air, but seven substances, 2-ethylhexan-1-ol, benzene, isophorone, heptanal, naphthalene, benzyl chloride, and 1,2-dichloropropane exceeded the non-cancer health guidelines for lifetime exposure. This finding suggested that specific regulations should be adopted to improve the chemical safety of face masks.

Uptake of Breathable Nano- and Micro-Sized Polystyrene Particles: Comparison of Virgin and Oxidised nPS/mPS in Human Alveolar Cells

Airborne micro- and nanoplastics are widely spread and pose a risk to human health. The third polymer plastic most commonly produced and present in atmospheric fallout is polystyrene (PS). For these reasons and for a more realistic assessment of biological effects, we examined in-home oxidised (ox-, simulating photoaging) nPS/mPS (0.1 and 1 μm), comparing the effects with virgin ones (v-). On human alveolar cells (A549), we quantified the cellular uptake, using FITC-functionalised nPS/mPS, while cytotoxicity, changes in the acidic compartment, ROS production, mitochondrial function, and DNA damage were assessed to study the effects of internalised v- and ox-nPS/mPS. The results showed that the uptake was dose-dependent and very fast (1 h), since, at the lowest dose (1.25 µg/well), it was 20.8% and 21.8% of nPS and mPS, respectively. Compared to v-, significant ROS increases, DNA damage, and mitochondrial impairment were observed after exposure to ox-nPS/mPS. The enhancement of effects due to environmental aging processes highlighted the true potential impact on human health of these airborne pollutants.

Microplastic pollution in the sediments of interconnected lakebed, seabed, and seashore aquatic environments: polymer-specific total mass through the multianalytical "PISA" procedure

The total mass of individual synthetic polymers present as microplastic (MP < 2 mm) pollutants in the sediments of interconnected aquatic environments was determined adopting the Polymer Identification and Specific Analysis (PISA) procedure. The investigated area includes a coastal lakebed (Massaciuccoli), a coastal seabed (Serchio River estuarine), and a sandy beach (Lecciona), all within a natural park area in Tuscany (Italy). Polyolefins, poly(styrene) (PS), poly(vinyl chloride) (PVC), polycarbonate (PC), poly(ethylene terephthalate) (PET), and the polyamides poly(caprolactame) (Nylon 6) and poly(hexamethylene adipamide) (Nylon 6,6) were fractionated and quantified through a sequence of selective solvent extractions followed by either analytical pyrolysis or reversed-phase HPLC analysis of the products of hydrolytic depolymerizations under acidic and alkaline conditions. The highest concentrations of polyolefins (highly degraded, up to 864 µg/kg of dry sediment) and PS (up to 1138 µg/kg) MPs were found in the beach dune sector, where larger plastic debris are not removed by the cyclic swash action and are thus prone to further aging and fragmentation. Surprisingly, low concentrations of less degraded polyolefins (around 30 µg/kg) were found throughout the transect zones of the beach. Positive correlation was found between polar polymers (PVC, PC) and phthalates, most likely absorbed from polluted environments. PET and nylons above their respective LOQ values were found in the lakebed and estuarine seabed hot spots. The pollution levels suggest a significant contribution from riverine and canalized surface waters collecting urban (treated) wastewaters and waters from Serchio River and the much larger Arno River aquifers, characterized by a high anthropogenic pressure.

Enhancement of biological effects of oxidised nano- and microplastics in human professional phagocytes

Micro and nanoplastics are ubiquitous pollutants that can cause adverse health effects even in humans. Effects of virgin and oxidised (simulating the aging processes) polystyrene nano (nPS) and micro particles (mPS) with diameters of 0.1 and 1 µm were studied on human professional phagocytes (i.e., monocyte cells THP-1 and macrophage-like mTHP-1 cells). After characterization by ATR-FTIR, UV-Vis spectroscopy, SEM and dynamic light-scattering analyses, the particles were FITC functionalised to quantify cellular uptake. Changes in the cell compartments were studied by acrydine orange and the pro-oxidant, cytotoxic and genotoxic effects were assessed. Phagocytosis was dose- and time- dependent and at 24 h 52% of nPS and 58% of mPS were engulfed. Despite the high homeostasis of professional phagocytes, significant ROS increases and DNA damage were observed after exposure to oxidised particles. The results highlight that the environmental aging processes enhances the adverse health effects of micro and nanoplastics.

Mechanical Performance and Cytotoxicity of an Alginate/Polyacrylamide Bipolymer Network Developed for Medical Applications

Several hydrogels could be used as scaffolds for tissue engineering and a model of extracellular matrices for biological studies. However, the scope of alginate in medical applications is often severely limited by its mechanical behavior. In the present study, the modification of the mechanical properties of the alginate scaffold is obtained by its combination with polyacrylamide in order to obtain a multifunctional biomaterial. The advantage of this double polymer network is due to an improvement in the mechanical strength with regard to the alginate alone, and in particular, its Young's modulus values. The morphological study of this network was carried out by scanning electron microscopy (SEM). The swelling properties were also studied over several time intervals. In addition to mechanical property requirements, these polymers must meet several biosafety parameters as part of an overall risk management strategy. Our preliminary study illustrates that the mechanical property of this synthetic scaffold depends on the ratio of the two polymers (alginate, polyacrylamide) which allows us to choose the appropriate ratio to mimic replaceable body tissue and be used in various biological and medical uses, including 3D cell culture, tissue engineering, and protection against local shocks.

Assessing and managing environmental hazards of polymers: historical development, science advances and policy options

Polymers are the main constituents of many materials and products in our modern world. However, their environmental safety is not assessed with the same level of detail as done for non-polymeric chemical substances. Moreover, the fundamentals of contemporary regulatory approaches for polymers were developed in the early 1990s, with little change occurring since then. Currently, the European Commission is working on a proposal to initiate registration of polymers under the European Union's (EU) chemicals legislation REACH. This provides a unique opportunity for regulation to catch up on recent scientific advances. To inform this process, we here critically appraise the suggested regulatory approaches to the environmental assessment and management of polymers against the latest scientific findings regarding their environmental fate, exposure, and effects, and identify the remaining critical knowledge gaps. While we use the EU draft proposal as an example, our findings are broadly applicable to other polymer legislations worldwide, due to the similarity of polymer assessment criteria being used. We emphasize four major aspects that require more attention in the regulation of polymers: (i) increased transparency about chemical identities, physical characteristics and grouping approaches for in-use polymers; (ii) improved understanding of the environmental fate of polymers and materials composed of polymers across size and density categories and exposure profiles; (iii) comprehensive assessment of the environmental hazards of polymers, considering the effects of degradation and weathering and taking into account the actual uptake, long-term toxicity, and geophysical impacts; and (iv) consideration of the production volume and use/release patterns in determining regulatory data and testing requirements. Transitioning toward a toxic-free and sustainable circular economy will likely require additional policy instruments that will reduce the overall complexity and diversity of in-use polymers and polymeric materials.

Developments in advanced oxidation processes for removal of microplastics from aqueous matrices

Continuous incorporation of microplastics (MPs) and their fragmented residues into the ecosystem has sparked significant scientific apprehensions about persistence, a multitude of sources, and toxicity impacts on human health and aquatic entities. Overcoming this multifaceted hazard necessitates the development of novel techniques with robust efficiencies to eliminate microplastics from the environmental compartments. Coagulation, flocculation, and membrane filtration are non-destructive techniques but necessitate extra steps for microplastic degradation, whereas biological means have been confirmed less efficient (less than 15% degradation). Recent reports have emphasized advanced oxidation processes (AOPs) as practical treatment alternatives, representing superior catalytic efficacy for microplastic degradation (≈30-95%). Nevertheless, additional investigations should be carried out to evaluate the performance of AOPs in degrading microplastics under real environmental matrices. Moreover, the detection of transformed metabolites, degradation mechanistic insights, and toxicity bioassays are required to substantiate AOP assumption as feasible remediation substitutes. This review focuses on the source, occurrence, discharge, transportation, and associated paramount health risks of microplastics. Advanced oxidation processes-assisted removal of microplastics from the aqueous matrices is thoroughly vetted with up-to-date findings. Factors affecting the degradation of MPs have been discussed in detail. In addition to the generalized mechanistic insights into photocatalytic degradation, the risk assessment of aging intermediates is also comprehended. Finally, the review was concluded by emphasizing current research gaps and incoming research tendencies to provide guidelines for efficiently addressing microplastic pollution.

Bioplastics: A new analytical challenge

Even though petroleum-based plastics are advantageous in complying with the performance requirements in many applications, these are related, throughout their life cycle, to several environmental problems, including greenhouse gas emissions and persistence in marine and terrestrial environments. Therefore, the preservation of natural resources and climate change is considered worldwide, the main reason for which is necessary to reduce consumption and dependence on fossil-based materials. Biopolymers (PLA, PHAs, etc.) are examples of plastics whose use is grown exponentially over the years because of the improvements of their physical and mechanical properties using additives of various nature and depending on the scope of application. This review aims to discuss various ways of biopolymer degradation, to evaluate if they represent a new Frontier in eco-sustainability or rather a re-proposal of old problems. Related to this topic, we also have focussed our attention on the different methods for the quantitative analysis of bioplastics, or their degradation by-products, comparing and evaluating the advantages and disadvantages of each technique.

Leached degradation products from beached microplastics: A potential threat to coastal dune plants

Plants play a fundamental role in maintaining coastal dunes but also accumulate littered microplastics (MPs). Migration tests suggest that naturally weathered MPs can leach out a broader range of potentially phytotoxic chemicals than virgin MPs. Thus, assessing MPs effects on plants using beached-collected particles rather than virgin ones is critically important. Here, the effects on plants of leachates from two pools of beach-collected and virgin MPs, high-density polyethylene (HDPE) and polypropylene (PP), and their mixture, were explored combining toxicity tests and chemical analyses. Phytotoxicity of MP leachates at different dilutions was evaluated under standard laboratory conditions using test species and under environmentally realistic conditions using the dune species Thinopyrum junceum. Leachates from beached PP and HDPE adversely affected all species, and the extent of these effects varied according to polymer type, concentration, and species. Virgin MPs had weaker effects than beached ones. Several potentially phytotoxic oxidized compounds were detected in water by GC/MS analysis, and their amount estimated. Results indicate that the molecular species leaching from beached MPs - at ppm concentration levels for the individual chemical species - can inhibit plant growth, and the effects of leachates from mixtures of degraded MPs can differ from those from individual polymers, highlighting the need for further investigation of MPs consequences for coastal ecosystems.

Mechanisms of polystyrene microplastic degradation by the microbially driven Fenton reaction

Natural hydroxyl radical (·OH) production, which partially occurs through the microbially driven Fenton reaction, can enhance the degradation of polystyrene microplastics (PS-MPs). However, ·OH causes damage to microorganisms, which might in turn restrain the microbially driven Fenton reaction. Thus, whether PS-MPs can be continuously degraded by the microbially driven Fenton reaction and how they are degraded are still unknown. A pure-culture system using Shewanella putrefaciens 200 was set up to explore the effect and mechanism of microbially driven Fenton reaction on PS-MP degradation. In a 14-day operation, ·OH produced by the microbially driven Fenton reaction could degrade PS-MPs with a weight loss of 6.1 ± 0.6% and an O/C ratio of 0.6 (v.s. 0.6 ± 0.1% and 0.1, respectively, in the ·OH quenched group). Benzene ring derivatives such as 2-isopropyl-5-methyl-1-heptanol and nonahexacontanoic acid were the main soluble products of PS-MP degradation. The ·OH-induced oxidative damage on microorganisms did not affect ·OH production significantly when there was timely replenishment of organic carbon sources to promote reproduction of microorganisms. Thus, PS-MPs can be continuously degraded by microbially driven Fenton reactions in natural alternating anaerobic-aerobic environments. This study also provides a new microbial technique for MP degradation that is different from previous technologies based on microbial plastic-degrading enzymes.

Determination of the microplastic content in Mediterranean benthic macrofauna by pyrolysis-gas chromatography-tandem mass spectrometry

The Mediterranean Sea water bodies are ones of the most polluted, especially with microplastics. As the seafloor is the ultimate sink for litter, it is considered a hotspot for microplastic pollution. We provide an original analytical development based on the coupling of tandem mass spectrometry to pyrolysis-gas chromatography to improve the detection of plastic contamination in marine organisms. Due to the high selectivity of the mass spectrometer, a straightforward sample preparation consists uniquely of potassium hydroxide digestion. The quantification of six common polymers is possible in one run. The method was applied to analyze the plastic content from 500 μm down to 0.7 μm in the whole body of seven benthic species with variable feeding modes. Plastic was detected in all samples, with an almost systematic detection of polypropylene and polyethylene. Our method presents a major development in determining the levels of plastic contaminations in samples with rich organic matter content.

Seeping plastics: Potentially harmful molecular fragments leaching out from microplastics during accelerated ageing in seawater

Microplastics are the particulate plastic debris found almost everywhere as environmental contaminants. They are not chemically stable persistent pollutants, but reactive materials. In fact, synthetic polymers exposed to the environment undergo chemical and physical degradation processes which lead not only to mechanical but also molecular fragmentation, releasing compounds that are potentially harmful for the environment and human health. We carried out accelerated photo-oxidative ageing of four reference microplastics (low- and high-density polyethylene, polypropylene, and polystyrene) directly in artificial seawater. We then made a characterization at the molecular level along with a quantification of the chemical species leached into water. Gas chromatography/mass spectrometry analyses performed after selective extraction and derivatization enabled us to identify more than 60 different compounds. Analysis of the leachates from the three polyolefins revealed that the main degradation products were mono- and dicarboxylic acids, along with linear and branched hydroxy acids. The highest amount of leached degradation species was observed for polystyrene, with benzoic acid and phenol derivatives as the most abundant, along with oligomeric styrene derivatives. The results from reference microplastics were then compared with those obtained by analyzing leachates in artificial seawater from aged plastic debris collected in a natural environment. The differences observed between the reference and the environmental plastic leachates mainly concerned the relative abundances of the chemical species detected, with the environmental samples showing higher amounts of dicarboxylic acids and oxidized species.

Research on the Mechanical Properties and Stretch Forming Simulation of Triaxial Geogrid with Different Pre-Punched Hole Diameters

In this paper, the tensile behavior of industrial polypropylene triaxial geogrid with different pre-punched hole diameters was studied by experiment and numerical analysis. The industrial polypropylene sheets with different diameters of circular holes were stretched at elevated temperature and then the tensile properties of triaxial geogrids at room temperature were evaluated. It was found that the pre-punched hole diameter of triaxial geogrid had a very close relationship with the mechanical properties. With the increase of the pre-punched hole diameter, the tensile strength of triaxial geogrid shows a trend of first increasing and then decreasing. Combined with numerical simulation, the optimal pre-punched hole diameter can be accurately obtained, and the distribution law of the width, thickness, stress, and strain of triaxial geogrid can be obtained. Under the condition of a stretching ratio of 3 and node spacing of 3 mm, it was found that the mechanical properties of industrial polypropylene triaxial geogrid was the best when the pre-punched hole diameter was 2.6 mm.

Degradation of low-density polyethylene to nanoplastic particles by accelerated weathering

When plastics enter the environment, they are exposed to abiotic and biotic impacts, resulting in degradation and the formation of micro- and nanoplastic. Microplastic is ubiquitous in every environmental compartment. Nevertheless, the underlying degradation processes are not yet fully understood. Here, we studied the abiotic degradation of commonly used semi-crystalline, low-density polyethylene (LDPE) in a long-term accelerated weathering experiment combining several macro- and microscopic methods. Based on our observations, the degradation of LDPE proceeds in three stages. Initially, LDPE objects are prone to abrasion, followed by a period of surface cracking. A large number of secondary particles with a high degree of crystallinity are formed, with sizes down to the nanometer scale. These particles consist of highly polar oligomers leading to agglomeration in the final stage. We therefore suppose that weathered microplastic and nanoplastic particles will attach to colloidal environmental matter. This offers an explanation for the absence of free nanoplastic particles in natural samples.

Co-pyrolysis of biomass and plastic: Synergistic effects and estimation of elemental composition of pyrolysis oil by analytical pyrolysis-gas chromatography/mass spectrometry

This paper presents a study on the pyrolytic behavior of mixtures of lignocellulosic biomass with hydrocarbon plastics using analytical pyrolysis-GC/MS. Semi-quantitative analysis using chromatographic peak areas was used to investigate the composition of the pyrolysis oils and to highlight the occurrence of synergistic effects. A new method is also proposed to estimate the elemental composition of the pyrolysis oil based on the peak areas and brute formulas of the pyrolysis products. The results indicate that synergistic effects during co-pyrolysis favor secondary pyrolysis of holocellulose and polystyrene oligomers, and hinder radical chain-scission of polyethylene chains. H/C and O/C values of the pyrolysis oils were improved by the addition of plastic, indicating a decrease in the content of oxygenated pyrolysis products. The best performances were observed for the mixture containing 70% fir wood and 30% polyethylene, in which synergistic effects led to both an increase of H/C and a decrease of O/C.

On-Line Thermally Induced Evolved Gas Analysis: An Update-Part 1: EGA-MS

Advances in on-line thermally induced evolved gas analysis (OLTI-EGA) have been systematically reported by our group to update their applications in several different fields and to provide useful starting references. The importance of an accurate interpretation of the thermally-induced reaction mechanism which involves the formation of gaseous species is necessary to obtain the characterization of the evolved products. In this review, applications of Evolved Gas Analysis (EGA) performed by on-line coupling heating devices to mass spectrometry (EGA-MS), are reported. Reported references clearly demonstrate that the characterization of the nature of volatile products released by a substance subjected to a controlled temperature program allows us to prove a supposed reaction or composition, either under isothermal or under heating conditions. Selected 2019, 2020, and 2021 references are collected and briefly described in this review.

Detection of plastic particles in marine sponges by a combined infrared micro-spectroscopy and pyrolysis-gas chromatography-mass spectrometry approach

Plastic pollution threatens the marine environment, especially due to the adverse effects caused by micro and nano particles interacting with the marine biota. In order to provide reliable data regarding micro and nanoplastic contamination and the related impacts, efficient analytical solutions are needed. We developed a new analysis workflow that uses marine sponges to monitor plastic pollution by characterizing the plastic particles accumulated in their tissue. Specimens of cf. Haliclona (Haplosclerida) were sampled in the Maldivian archipelago. The aim was to optimize the method and to carry out a pilot study of the contamination of the related reef habitat. Particles were isolated, size fractioned, counted and submitted to morphological and chemical characterization. The constituting polymer was identified by infrared microspectroscopy for particles >25 μm, and by pyrolysis coupled with gas chromatography mass spectrometry for those <25 μm. Method recoveries were between 87 and 83% and limits of quantitation (LOQs) were between 6.6 and 30.2 ng/g. Analyses showed that 70% of the sponges presented plastic contamination, with an average of 1.2 particles/g tissue for the 25-150 μm size range, and a total plastic concentration of up to 4.8 μg/g in the 0.2-25 μm size range, with polyolefin being the most represented polymer in both size ranges. Overall, the study demonstrated the reliability of the proposed analytical workflow and of the use of sponges as biosamplers for plastic particles.

Polystyrene bead ingestion promotes adiposity and cardiometabolic disease in mice

Vast amounts of plastic materials are produced in the modern world and despite recycling efforts, large amounts are disposed in water systems and landfills. Under these storage conditions, physical weathering and photochemical processes break down these materials into smaller particles of the micro- and nano-scale. In addition, ecosystems can be contaminated with plastic particles which are manufactured in these size ranges for commercial purposes. Independent of source, microplastics are abundant in the environment and have found their way into water supplies and the food cycle where human exposure is inevitable. Nevertheless, the health consequences of microplastic ingestion, inhalation, or absorption are largely unknown. In this study we sought to determine if ingestion of microplastics promoted pre-clinical cardiovascular disease (CVD). To do this, we supplied mice with normal drinking water or that supplemented with polystyrene beads of two different sizes (0.5 µm and 5 µm) and two different doses (0.1 μg/ml and 1 μg/ml) each for 12 weeks and measured several indices of metabolism and glucose homeostasis. As early as 3 weeks of consumption, we observed an accelerated weight gain with a corresponding increase in body fat for some exposure groups versus the control mice. Some exposure groups demonstrated increased levels of fasting plasma glucose. Those mice consuming the smaller sized beads (0.5 µm) at the higher dose (1 μg/ml), had increased levels of fasting plasma insulin and higher homeostatic model assessment of insulin resistance (HOMA-IR) scores as well. This was accompanied by changes in the gut microbiome consistent with an obese phenotype. Using samples of perivascular adipose tissue collected from the same group, we observed changes in gene expression consistent with increased adipogenesis. These results suggest that ingestion of polystyrene beads promotes a cardiometabolic disease phenotype and thus may be an unrecognized risk factor for CVD.