Emerging Multifunctional NIR Photothermal Therapy Systems Based on Polypyrrole Nanoparticles

Polyphenol-mediated hyaluronic acid/tannic acid hydrogel with short gelation time and high adhesion strength for accelerating wound healing

Wound healing is a complex process involving a complicated interplay between numerous cell types and vascular systems. Hyaluronic acid (HA)-based hydrogel facilitates wound healing, and is involved in all processes. However, slow gelation speed and weak adhesion strength limit its ability to form a stable physical barrier quickly. Herein, we propose a HA-based composite hydrogel as the wound dressing based on oxidative coupling reaction. Tannic acid and dopamine-coated carbon particles (DCPs) containing abundant phenolic hydroxyl groups are incorporated into the HA-based hydrogel for increasing the number of crosslinking sites of oxidative coupling of the hydrogel and enhancing adhesion through the formation of covalent bonds and hydrogen bonds between hydrogel and wound sites. The composite hydrogel exhibits short gelation time (<6 s) and high adhesion strength (>8.1 kPa), which are superior to the references and commercial products of its kind. The in vitro experiments demonstrate that the hydrogel has low hemolytic reaction, negligible cytotoxicity, and the ability to promote fibroblast proliferation and migration. The in vivo full-thickness skin defect model experiments demonstrate that the hydrogel can accelerate wound healing under mild photothermal stimulation of DCPs by reducing inflammation, relieving tissue hypoxia, and promoting angiogenesis and epithelialization.

Development of folate-conjugated polypyrrole nanoparticles incorporated with nitrogen-doped carbon quantum dots for targeted bioimaging and photothermal therapy

PPy nanoparticles are widely employed as PTT agents, because of their exceptional near-infrared absorption properties. Nonetheless, the efficacy of PTT with PPy nanoparticles is hindered by a challenge, specifically, a lack of precise targeting. In this study, a PTT imaging agent was developed by combining NCQDs having bright green fluorescent properties with PPy nanoparticles along with the masking of folic acid to overcome the challenge of targeting. The synthesized PPy:NCQDs:FA nanocomposite, characterized by extraordinary photothermal property, was utilized for imaging of folate receptor positive (FA+) MCF-7 cancer cells through the emission of green fluorescence by NCQDs incorporated within the nanocomposite. Additionally, these nanoparticles demonstrated a good level of cell viability, exceeding 82 %, even at a concentration of 600 μg mL-1. Even the in vivo toxicity inspection of the nanocomposite exemplified no observed acute toxicity at experimental dosages of 1 and 3 mg per kg body weight. By subjecting MCF-7 cells, inoculated with 100 μg mL-1 of nanocomposite, to NIR laser irradiation for 5 min, a significant decline in cell viability was witnessed, establishing the photothermal therapeutic potency of the nanocomposite. The death of cancer cells induced by nanocomposite was verified through MTT assay, imaging of cells by NCQDs alone, with nanocomposite, and by live/dead cell Calcein AM/PI staining assay. Quantification of induced apoptosis post-laser treatment is conducted through staining with Annexin V-FITC/PI. These findings establish potential use of PPy:NCQDs:FA nanocomposite as versatile theranostic agents, capable of targeted bioimaging and treatment for cancer cells exhibiting folate receptors.

Electrically conductive coatings in tissue engineering

Recent interest in tissue engineering (TE) has focused on electrically conductive biomaterials. This has been inspired by the characteristics of the cells' microenvironment where signalling is supported by electrical stimulation. Numerous studies have demonstrated the positive influence of electrical stimulation on cell excitation to proliferate, differentiate, and deposit extracellular matrix. Even without external electrical stimulation, research shows that electrically active scaffolds can improve tissue regeneration capacity. Tissues like bone, muscle, and neural contain electrically excitable cells that respond to electrical cues provided by implanted biomaterials. To introduce an electrical pathway, TE scaffolds can incorporate conductive polymers, metallic nanoparticles, and ceramic nanostructures. However, these materials often do not meet implantation criteria, such as maintaining mechanical durability and degradation characteristics, making them unsuitable as scaffold matrices. Instead, depositing conductive layers on TE scaffolds has shown promise as an efficient alternative to creating electrically conductive structures. A stratified scaffold with an electroactive surface synergistically excites the cells through active top-pathway, with/without electrical stimulation, providing an ideal matrix for cell growth, proliferation, and tissue deposition. Additionally, these conductive coatings can be enriched with bioactive or pharmaceutical components to enhance the scaffold's biomedical performance. This review covers recent developments in electrically active biomedical coatings for TE. The physicochemical and biological properties of conductive coating materials, including polymers (polypyrrole, polyaniline and PEDOT:PSS), metallic nanoparticles (gold, silver) and inorganic (ceramic) particles (carbon nanotubes, graphene-based materials and Mxenes) are examined. Each section explores the conductive coatings' deposition techniques, deposition parameters, conductivity ranges, deposit morphology, cell responses, and toxicity levels in detail. Furthermore, the applications of these conductive layers, primarily in bone, muscle, and neural TE are considered, and findings from in vitro and in vivo investigations are presented. STATEMENT OF SIGNIFICANCE: Tissue engineering (TE) scaffolds are crucial for human tissue replacement and acceleration of healing. Neural, muscle, bone, and skin tissues have electrically excitable cells, and their regeneration can be enhanced by electrically conductive scaffolds. However, standalone conductive materials often fall short for TE applications. An effective approach involves coating scaffolds with a conductive layer, finely tuning surface properties while leveraging the scaffold's innate biological and physical support. Further enhancement is achieved by modifying the conductive layer with pharmaceutical components. This review explores the under-reviewed topic of conductive coatings in tissue engineering, introducing conductive biomaterial coatings and analyzing their biological interactions. It provides insights into enhancing scaffold functionality for tissue regeneration, bridging a critical gap in current literature.

Noninvasive Photothermal Therapy of Nasopharyngeal Cancer Guided by High Efficiency Optical-Absorption Nanomaterial Enhanced by NIR-II Photoacoustic Imaging

Background

Photothermal therapy (PTT) guided by photoacoustic imaging (PAI) using nanoplatforms has emerged as a promising strategy for cancer treatment due to its efficiency and accuracy. This study aimed to develop and synthesize novel second near-infrared region (NIR-II) absorption-conjugated polymer acceptor acrylate-substituted thiadiazoloquinoxaline-diketopyrrolopyrrole polymers (PATQ-DPP) designed specifically as photothermal and imaging contrast agents for nasopharyngeal carcinoma (NPC).

Methods

The PATQ-DPP nanoparticles were synthesized and characterized for their optical properties, including low optical band gaps. Their potential as PTT agents and imaging contrast agents for NPC was evaluated both in vitro and in vivo. The accumulation of nanoparticles at tumor sites was assessed post-injection, and the efficacy of PTT under near-infrared laser irradiation was investigated in a mouse model of NPC.

Results

Experimental results indicated that the PATQ-DPP nanoparticles exhibited significant photoacoustic contrast enhancement and favorable PTT performance. Safety and non-toxicity evaluations confirmed the biocompatibility of these nanoparticles. In vivo studies showed that PATQ-DPP nanoparticles effectively accumulated at NPC tumor sites and demonstrated excellent tumor growth inhibition upon exposure to near-infrared laser irradiation. Notably, complete elimination of nasopharyngeal tumors was observed within 18 days following PTT.

Discussion

The findings suggest that PATQ-DPP nanoparticles are a promising theranostic agent for NIR-II PAI and PTT of tumors. This innovative approach utilizing PATQ-DPP nanoparticles provides a powerful tool for the early diagnosis and precise treatment of NPC, offering a new avenue in the management of this challenging malignancy.

Utilization of the through-space effect to design donor-acceptor systems of pyrrole, indole, isoindole, azulene and aniline

Molecular electrostatic potential (MESP) topology analysis reveals the underlying phenomenon of the through-space effect (TSE), which imparts electron donor-acceptor properties to a wide range of chemical systems, including derivatives of pyrrole, indole, isoindole, azulene, and aniline. The TSE is inherent in pyrrole owing to the strong polarization of electron density (PoED) from the formally positively charged N-center to the C3C4 bonding region. The N → C3C4 directional nature of the TSE has been effectively employed to design molecules with high electronic polarization, such as bipyrroles, polypyrroles, phenyl pyrroles, multi-pyrrolyl systems and N-doped nanographenes. In core-expanded structures, the direction of electron flow from pyrrole units towards the core leads to highly electron-rich systems, while the opposite arrangement results in highly electron-deficient systems. Similarly, the MESP analysis reveals the presence of the TSE in azulene, indole, isoindole, and aniline. Oligomeric chains of these systems are designed in such a way that the direction of electron flow is consistent across each monomer, leading to substantial electronic polarization between the first and last monomer units. Notably, these designed systems exhibit strong donor-acceptor characteristics despite the absence of explicit donor and acceptor moieties, which is supported by FMO analysis, APT charge analysis, NMR data and λmax data. Among the systems studied, the TSEs of many experimentally known systems (bipyrroles, phenyl pyrroles, hexapyrrolylbenzene, octapyrrolylnaphthalene, decapyrrolylcorannulene, polyindoles, polyazulenes, etc.) are unraveled for the first time, while numerous new systems (polypyrroles, polyisoindoles, and amino-substituted benzene polymers) are predicted to be promising materials for the creation of donor-acceptor systems. These findings demonstrate the potential of the TSE in molecular design and provide new avenues for creating functional materials.

Recent Progress of Photothermal Therapy Based on Conjugated Nanomaterials in Combating Microbial Infections

Photothermal therapy has the advantages of non-invasiveness, low toxicity, simple operation, a broad spectrum of antibacterial ability, and non-proneness to developing drug resistance, which provide it with irreplaceable superiority in fighting against microbial infection. The effect of photothermal therapy is closely related to the choice of photothermal agent. Conjugated nanomaterials are potential candidates for photothermal agents because of their easy modification, excellent photothermal conversion efficiency, good photostability, and biodegradability. In this paper, the application of photothermal agents based on conjugated nanomaterials in photothermal antimicrobial treatment is reviewed, including conjugated small molecules, conjugated oligomers, conjugated polymers, and pseudo-conjugated polymers. At the same time, the application of conjugated nanomaterials in the combination of photothermal therapy (PTT) and photodynamic therapy (PDT) is briefly introduced. Finally, the research status, limitations, and prospects of photothermal therapy using conjugated nanomaterials as photothermal agents are discussed.

Organic Photothermal Cocrystals: Rational Design, Controlled Synthesis, and Advanced Application

Organic photothermal cocrystals, integrating the advantages of intrinsic organic cocrystals and the fascinating photothermal conversion ability, hold attracted considerable interest in both basic science and practical applications, involving photoacoustic imaging, seawater desalination, and photothermal therapy, and so on. However, these organic photothermal cocrystals currently suffer individual cases discovered step by step, as well as the deep and systemic investigation in the corresponding photothermal conversion mechanisms is rarely carried out, suggesting a huge challenge for their further developments. Therefore, it is urgently necessary to investigate and explore the rational design and synthesis of high-performance organic photothermal cocrystals for future applications. This review first and systematically summarizes the organic photothermal cocrystal in terms of molecular classification, the photothermal conversion mechanism, and their corresponding applications. The timely interpretation of the cocrystal photothermal effect will provide broad prospects for the purposeful fabrication of excellent organic photothermal cocrystals toward great efficiency, low cost, and multifunctionality.

Effect of Ultrasonication Parameters on the Structural, Morphological, and Electrical Properties of Polypyrrole Nanoparticles and Optimization by Response Surface Methodology

Polypyrrole (PPy) nanoparticles are reliable conducting polymers with many industrial applications. Nevertheless, owing to disadvantages in structure and morphology, producing PPy with high electrical conductivity is challenging. In this study, a chemical oxidative polymerization-assisted ultra-sonication method was used to synthesize PPy with high conductivity. The influence of critical sonication parameters such as time and power on the structure, morphology, and electrical properties was examined using response surface methodology. Various analyses such as SEM, FTIR, DSC, and TGA were performed on the PPy. An R² value of 0.8699 from the regression analysis suggested a fine correlation between the observed and predicted values of PPy conductivity. Using response surface plots and contour line diagrams, the optimum sonication time and sonication power were found to be 17 min and 24 W, respectively, generating a maximum conductivity of 2.334 S/cm. Meanwhile, the model predicted 2.249 S/cm conductivity, indicating successful alignment with the experimental data and incurring marginal error. SEM results demonstrated that the morphology of the particles was almost spherical, whereas the FTIR spectra indicated the presence of certain functional groups in the PPy. The obtained PPy with high conductivity can be a promising conducting material with various applications, such as in supercapacitors, sensors, and other smart electronic devices.

Redshifted and thermally bistable one-way quantitative hemithioindigo-derived photoswitches enabled by isomer-specific excited state intramolecular proton transfer

We report bistable indole-containing hemithioindigos (HTIs) with one-way quantitative photoswitching properties. Supported by state-averaged CASPT2/CASSCF calculations, we propose a mechanism for the observed one-way photoswitching that involves an isomer-specific excited state intramolecular proton transfer (ESIPT). Additionally, we developed a thermally bistable oligomer-inspired bipyrrole-containing HTI, which displays large band separation and bidirectional near-quantitative photoisomerization in the near-infrared, bio-optical window.

Multifunctional hybrid hydrogel with transparency, conductivity, and self-adhesion for soft sensors using hemicellulose-decorated polypyrrole as a conductive matrix

Polymers with high conductivity and cross-linking ability are ideal materials for the preparation of conductive hydrogels for application in wearable electronic devices. However, the fabrication of conductive polymer-incorporated hydrogels with good synergistic properties remains a great challenge due to the hydrophobicity and opacity of conjugated π conductive polymers. In this study, a multifunctional hybrid hydrogel was prepared by incorporating hemicellulose-decorated polypyrrole (H/PPY), polyvinyl alcohol (PVA), and tannic acid (TA) into a polyacrylamide (PAM) network. The addition of excess ammonium persulfate (APS) in the process of gelation not only initiated the polymerization of PAM but also resulted in the change of the hydrogel from opaque to transparent by continuously breaking and reducing the size of the PPY particles. The hybrid hydrogel exhibited high transparency and conductivity, good adhesion ability and mechanical performance, and high resistance strain sensitivity and could accurately monitor the strain signals of the index finger and elbow flexion and pulse beat during rest and exercise, which has promising potential for use in wearable or implantable smart sensor devices, electronic skins, and artificial intelligence applications.

Spatiotemporal Temperature Distribution of NIR Irradiated Polypyrrole Nanoparticles and Effects of pH

The spatiotemporal temperature distributions of NIR irradiated polypyrrole nanoparticles (PPN) were evaluated by varying PPN concentrations and the pH of suspensions. The PPN were synthesized by oxidative chemical polymerization, resulting in a hydrodynamic diameter of 98 ± 2 nm, which is maintained in the pH range of 4.2–10; while the zeta potential is significantly affected, decreasing from 20 ± 2 mV to −5 ± 1 mV at the same pH range. The temperature profiles of PPN suspensions were obtained using a NIR laser beam (1.5 W centered at 808 nm). These results were analyzed with a three-dimensional predictive unsteady-state heat transfer model that considers heat conduction, photothermal heating from laser irradiation, and heat generation due to the water absorption. The temperature profiles of PPN under laser irradiation are concentration-dependent, while the pH increase only induces a slight reduction in the temperature profiles. The model predicts a value of photothermal transduction efficiency (η) of 0.68 for the PPN. Furthermore, a linear dependency was found for the overall heat transfer coefficient (U) and η with the suspension temperature and pH, respectively. Finally, the model developed in this work could help identify the exposure time and concentration doses for different tissues and cells (pH-dependent) in photothermal applications.

Poly-l-lysine derivative-coated black phosphorus as a nanoplatform for photothermal chemotherapy to enhance anti-tumor efficiency

Severe systemic toxicity and side effects are major obstacles to the success of chemotherapy for tumors. Regardless of the choice of chemotherapy drugs, the safety of drug delivery materials is crucial, and therefore, there have been various efforts to improve the therapeutic effect and the biological safety of drug delivery systems (DDSs). In this study, a dual stimulus-response DDS (PLL-SS@DOX-BP) was constructed based on the biomaterials of black phosphorus (BP) nanosheets and poly-l-lysine (PLL) to enhance the treatment of doxorubicin hydrochloride (DOX) for breast cancer. The PLL derivative was nano-coated on the surface of drug-loaded BP nanosheets, and it prevented premature leakage of the drug and maintained the stability of the DDS. The introduced disulfide bonds and photothermal agent BP enabled the redox and near-infrared responsive drug release of the DDS, and the coated PLL derivative on the nanocarrier decreased premature leakage of the drug before the DDS reached the tumor tissues. The in vitro and in vivo experiments showed that the combination of biomaterial (PLL) and photothermal material (BP nanosheets) exhibited excellent biological safety and remarkable drug delivery capacity. Moreover, the pharmacodynamic studies indicated that PLL-SS@DOX-BP is a powerful vehicle for photothermal therapy in combination with chemotherapy. Compared with chemotherapy alone, the developed DDS displayed enhanced anti-tumor efficiency with decreased systemic toxicity, and thus, it has the potential to be a promising anti-tumor treatment strategy.

Nanoarchitectured Graphene Organic Framework for Drug Delivery and Chemo-photothermal Synergistic Therapy

The combination of phototherapy and chemotherapy has received extensive attention in the field of cancer therapy. Hence, graphene organic framework (GOF) with a large d-spacing was prepared by solvothermal method, and a novel nanocomposite based on bovine serum albumin (BSA) and the anticancer drug doxorubicin (DOX) was developed, which effectively achieved a photothermal-chemotherapy synergistic treatment. When the feeding ratio was 1:1.6, the DOX loading capacity was 18.51%, and the GOF-BSA/DOX nanocomposite possessed unobvious pH response characteristic, as well as the cumulative release of DOX reached 54.17% at 42°C in the acidic environment (pH = 5.0). The nanocarriers also showed excellent photothermal property and photothermal stability in vitro. In addition, under 808 nm near-infrared laser (NIR) irradiation, the GOF-BSA/DOX nanocomposites generated a large amount of heat, which significantly enhanced the synergistic antitumor effect of in vitro photothermal-chemotherapy. Furthermore, the GOF-BSA/DOX nanocomposites exhibited significantly increased cytotoxicity in the NIR compared with chemotherapy or photothermal therapy alone, suggesting that the combination of chemotherapy and photothermal therapy has excellent antitumor capacity. Therefore, porous GOF nanocarriers may have great potential in combined anti-tumour therapy.

Arsenite-loaded albumin nanoparticles for targeted synergistic chemo-photothermal therapy of HCC

Arsenic trioxide (ATO, As₂O₃), an active ingredient of traditional Chinese medicine, has been approved by the U.S. Food and Drug Administration as an effective therapeutic agent for acute promyelocytic leukemia (APL). However, the application of ATO in treating advanced solid tumors like hepatocellular carcinoma (HCC) is still restricted by limited therapeutic efficacy and insufferable side effects. To solve this problem, we reported a general and facile strategy using human serum albumin (HSA) as a template for synthesizing a series of ATO-based nanoparticles with uniform single-albumin size. Then, we prepared a multifunctional drug delivery system (MDDS) based on MnAs/HSA termed MnAs/ICG/HSA-RGD, and tested its efficacy both in vitro and in vivo. Our results revealed that the photothermal effect of MnAs/ICG/HSA-RGD can not only cause irreversible damage to the tumor but also accelerate the discharge of As and Mn²⁺ ions, enabling responsive chemotherapy and magnetic resonance imaging. Interestingly, the expression of HSP90, vimentin, and MMP-9 in tumor cells was inhibited during the treatment, resulting in less metastasis and recurrence. Moreover, no apparent side effect has been observed during the treatment. Therefore, MnAs/ICG/HSA-RGD can be considered as a promising option for HCC with excellent therapeutic efficacy and minimum side effects.

PPy@Fe3O4 Nanoparticles Inhibit Tumor Growth and Metastasis Through Chemodynamic and Photothermal Therapy in Non-small Cell Lung Cancer

Non-small cell lung cancer (NSCLC) is considered to be a principal cause of cancer death across the world, and nanomedicine has provided promising alternatives for the treatment of NSCLC in recent years. Photothermal therapy (PTT) and chemodynamic therapy (CDT) have represented novel therapeutic modalities for cancer treatment with excellent performance. The purpose of this research was to evaluate the effects of PPy@Fe₃O₄ nanoparticles (NPs) on inhibiting growth and metastasis of NSCLC by combination of PTT and CDT. In this study, we synthesized PPy@Fe₃O₄ NPs through a very facile electrostatic absorption method. And we detected reactive oxygen species production, cell apoptosis, migration and protein expression in different groups of A549 cells and established xenograft models to evaluate the effects of PPy@Fe₃O₄ NPs for inhibiting the growth of NSCLC. The results showed that the PPy@Fe₃O₄ NPs had negligible cytotoxicity and could efficiently inhibit the cell growth and metastasis of NSCLC in vitro. In addition, the PPy@Fe₃O₄ NPs decreased tumor volume and growth in vivo and endowed their excellent MRI capability of observing the location and size of tumor. To sum up, our study displayed that the PPy@Fe₃O₄ NPs had significant synergistic effects of PTT and CDT, and had good biocompatibility and safety in vivo and in vitro. The PPy@Fe₃O₄ NPs may be an effective drug platform for the treatment of NSCLC.

Harvesting Light To Produce Heat: Photothermal Nanoparticles for Technological Applications and Biomedical Devices

The photothermal properties of nanoparticles (NPs), that is, their ability to convert absorbed light into heat, have been studied since the end of the last century, mainly on gold NPs. In the new millennium, these studies have developed into a burst of research dedicated to the photothermal ablation of tumors. However, beside this strictly medical theme, research has also flourished in the connected areas of photothermal antibacterial surface coatings, gels and polymers, of photothermal surfaces for cell stimulation, as well as in purely technological areas that do not involve medical biotechnology. These include the direct conversion of solar light into heat, a more efficient sun-powered generation of steam and the use of inkjet-printed patterns of photothermal NPs for anticounterfeit printing based on temperature reading, to cite but a few. After an analysis of the photothermal effect (PTE) and its mechanism, this minireview briefly considers the antitumor-therapy theme and takes an in-depth look at all the other technological and biomedical applications of the PTE, paying particular attention to photothermal materials whose NPs have joined those based on Au.

Photothermal-Irradiated Polyethyleneimine-Polypyrrole Nanopigment Film-Coated Polyethylene Fabrics for Infrared-Inspired with Pathogenic Evaluation

Influenza, pneumonia, and pathogenic infection of the respiratory system are boosted in cold environments. Low temperatures also result in vasoconstriction, restraint of blood flow, and decreased oxygen to the heart, and the risk of a heart attack would increase accordingly. The present face mask fabric fails to preserve its air-filtering function as its electrostatic function vanishes once exposed to water. Therefore, its filtering efficacy would be decreased meaningfully, making it nearly impracticable to reuse the disposable face masks. The urgent requirement for photothermal fabrics is also rising. Nanobased polyethyleneimine-polypyrrole nanopigments (NPP NPs) have been developed and have strong near-infrared spectrum absorption and exceptional photothermal convertible performance. Herein, the mask fabric used PE-fiber-constructed membrane (PEFM) was coated by the binding affinity of the cationic polyethyleneimine component of NPP NPs forming NPP NPs-PEFM. To the best of our knowledge, no study has investigated NPP NP-coated mask fabric to perform infrared red (solar or body) photothermal conversion efficacy to provide biocompatible warming, remotely photothermally captured antipathogen, and antivasoconstriction in vivo. This pioneering study showed that the developed NPP NPs-PEFM could be washable, reusable, breathable, biocompatible, and photothermal conversable for active eradication of pathogenic bacteria. Further, it possesses warming preservation and antivasoconstriction.

Molybdenum-based hetero-nanocomposites for cancer therapy, diagnosis and biosensing application: Current advancement and future breakthroughs

In recent years, there have been significant advancements in the nanotechnology for cancer therapy. Even though molybdenum disulphide (MoS2)-based nanocomposites demonstrated extensive applications in biosensing, bioimaging, phototherapy, the review article focusing on MoS2 nanocomposite platform has not been accounted for yet. The review summarizes recent strategies on design and fabrication of MoS2-based nanocomposites and their modulated properties in cancer treatment. The review also discussed several therapeutic strategies (photothermal, photodynamic, immunotherapy, gene therapy and chemotherapy) and their combinations for efficient cancer therapy along with certain case studies. The review also inculcates various diagnostic techniques viz. magnetic resonance imaging, computed tomography, photoacoustic imaging and fluorescence imaging for diagnosis of cancer.

Current trends in pyrrole and porphyrin-derived nanoscale materials for biomedical applications

This article is written to provide an up-to-date review of pyrrole-based biomedical materials. Porphyrins and other tetrapyrrolic molecules possess unique magnetic, optical and other photophysical properties that make them useful for bioimaging and therapy. This review touches briefly on some of the synthetic strategies to obtain porphyrin- and tetrapyrrole-based nanoparticles, as well as the variety of applications in which crosslinked, self-assembled, porphyrin-coated and other nanoparticles are utilized. We explore examples of these nanoparticles' applications in photothermal therapy, drug delivery, photodynamic therapy, stimuli response, fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, computed tomography and positron emission tomography. We anticipate that this review will provide a comprehensive summary of pyrrole-derived nanoparticles and provide a guideline for their further development.

Targeted Heating of Mitochondria Greatly Augments Nanoparticle-Mediated Cancer Chemotherapy

Cancer is the second leading cause of mortality globally. Various nanoparticles have been developed to improve the efficacy and safety of chemotherapy, photothermal therapy, and their combination for treating cancer. However, most of the existing nanoparticles are low in both subcellular precision and drug loading content (<≈5%), and the effect of targeted heating of subcellular organelles on the enhancement of chemotherapy has not been well explored. Here, a hybrid Py@Si-TH nanoparticle is reported to first target cancer cells overexpressed with the variant CD44 via its natural ligand HA on the outermost surface of the nanoparticle before cellular uptake, and then target mitochondria after they are taken up inside cells. In addition, the nanoparticle is ultraefficient for encapsulating doxorubicin hydrochloride (DOX) to form Py@Si-TH-DOX nanoparticle. The encapsulation efficiency is ≈100% at the commonly used low feeding ratio of 1:20 (DOX:empty nanoparticle), and >80% at an ultrahigh feeding ratio of 1:1. In combination with near infrared (NIR, 808 nm) laser irradiation, the tumor weight in the Py@Si-TH-DOX treatment group is 8.5 times less than that in the Py@Si-H-DOX (i.e., DOX-laden nanoparticles without mitochondrial targeting) group, suggesting targeted heating of mitochondria is a valuable strategy for enhancing chemotherapy to combat cancer.

The Progress and Prospect of Zeolitic Imidazolate Frameworks in Cancer Therapy, Antibacterial Activity, and Biomineralization

The progressive development of zeolitic imidazolate frameworks (ZIFs), as a subfamily of metal-organic frameworks (MOFs), and their unique features, including tunable pore size, large surface area, high thermal stability, and biodegradability/biocompatibility, have made them attractive in the field of biomedicine, especially for drug delivery and biomineralization applications. The high porosity of ZIFs gives them the opportunity for encapsulating a high amount of therapeutic drugs, proteins, imaging cargos, or a combination of them to construct advanced multifunctional drug delivery systems (DDSs) with combined therapeutic and imaging capabilities. This review summarizes recent strategies on the design and fabrication of ZIF-based nansystems and their exploration in the biomedical field. First, recent developments for the adjustment of particle size, functionality, and morphology of ZIFs are discussed, which are important for achieving optimized therapeutic/theranostic nanosystems. Second, recent trends on the application of ZIF nanocarriers for the loading of diverse cargos, including anticancer medicines, antibiotic drugs, enzymes, proteins, photosensitizers, as well as imaging and photothermal agents, are investigated in order to understand how multifunctional DDSs can be designed based on the ZIF nanoparticles to treat different diseases, such as cancer and infection. Finally, prospects on the future research direction and applications of ZIF-based nanomedicines are discussed.

Scalable dextran-polypyrrole nano-assemblies with photothermal/photoacoustic dual capabilities and enhanced biocompatibility

Polypyrroles have shown great potential in photoacoustic imaging and photothermal therapy owing to its excellent photothermal conversion capabilities. However, the synthesis of polypyrrole-based nano-assemblies which have colloidal stability in biological buffers requires a number of steps, including the polymerization of pyrrole monomers, self-assembly of polypyrrole-based copolymers, and even an additional step to increase the biocompatibility of the nano-assemblies. Herein, a "polymerization/assembly" two-in-one synthesis is proposed for the first time to achieve the one-step synthesis of a new family of polypyrrole-based nano-assemblies, dextran-polypyrrole nano-assemblies (Dex-PPy NAs), under ambient conditions and in aqueous media. In addition, the approach employs tetravalent cerium ions as initiators which can initiate the polymerization of pyrrole monomers through the initiation of free radicals from dextran molecular chains. The resultant Dex-PPy NAs have a photothermal conversion efficiency reaching as high as 41 % and an excellent photostability. More importantly, the NAs with controllable nanoscale dimensions display no signs of cytotoxicity in both in vitro and in vivo studies owing to their biocompatible dextran "shell". An in vivo study further confirmed that the Dex-PPy NAs have excellent real-time photoacoustic imaging and photothermal therapy capabilities for malignant tumors. Therefore, this study represents an important step towards the scalable synthesis of polypyrrole-based nano-assemblies with photothermal/photoacoustic dual capabilities and enhanced biocompatibility.

Targeted multifunctional nanomaterials with MRI, chemotherapy and photothermal therapy for the diagnosis and treatment of bladder cancer

Folate-modified vincristine-loaded polydopamine-coated Fe₃O₄ superparticles are designed as multifunctional nanomaterials for the imaging and treatment of bladder cancer.

Carbon@polypyrrole nanotubes as a photosensitizer in laser phototherapy of Pseudomonas aeruginosa

Phototherapy has been offered as an alternative and promising antibacterial strategy to overcome the antibiotic resistance problem. This study evaluated the antibacterial and phototherapy effects of carbon nanotubes with a polypyrrole coating in a core@shell structure (CNTs@PPy) on Pseudomonas aeruginosa (P. aeruginosa). P. aeruginosa was treated with CNTs@PPy at different concentrations (50-500 μg mL^-1) in dark or laser light irradiation with a wavelength of 808 nm, a power density of 1000 mW cm^-2 for 20 min. Temperature increment, cell viability, formation of reactive oxygen species (ROS) and protein/nucleic acid leakage subsequent the P. aeruginosa treatment were evaluated. The results showed that near-infrared laser irradiation of CNTs@PPy caused to a temperature increment confirming the ability of powerful photokilling of P. aeruginosa in a photothermal route. On the other hand, while CNTs@PPy represented just a 30-50% P. aeruginosa killing rate in dark, laser irradiation of 250 and 500 μg mL^-1 concentrations of CNTs@PPy resulted in a ˜70% P. aeruginosa killing rate, along with significant ROS production into the medium and protein and nucleic acid leakage from P. aeruginosa. These later effects were assigned to a photodynamic route activity of CNTs@PPy upon laser irradiation. Therefore, CNTs@PPy acted as a photosensitizer in both photothermal and photodynamic therapies to present an enhanced bactericidal activity to annihilate and destroyed the gram-negative bacteria P. aeruginosa, a cause of many infectious diseases.

Gold Nanoparticles for Photothermal Cancer Therapy

Gold is a multifunctional material that has been utilized in medicinal applications for centuries because it has been recognized for its bacteriostatic, anticorrosive, and antioxidative properties. Modern medicine makes routine, conventional use of gold and has even developed more advanced applications by taking advantage of its ability to be manufactured at the nanoscale and functionalized because of the presence of thiol and amine groups, allowing for the conjugation of various functional groups such as targeted antibodies or drug products. It has been shown that colloidal gold exhibits localized plasmon surface resonance (LPSR), meaning that gold nanoparticles can absorb light at specific wavelengths, resulting in photoacoustic and photothermal properties, making them potentially useful for hyperthermic cancer treatments and medical imaging applications. Modifying gold nanoparticle shape and size can change their LPSR photochemical activities, thereby also altering their photothermal and photoacoustic properties, allowing for the utilization of different wavelengths of light, such as light in the near-infrared spectrum. By manufacturing gold in a nanoscale format, it is possible to passively distribute the material through the body, where it can localize in tumors (which are characterized by leaky blood vessels) and be safely excreted through the urinary system. In this paper, we give a quick review of the structure, applications, recent advancements, and potential future directions for the utilization of gold nanoparticles in cancer therapeutics.

Contemporary Polymer-Based Nanoparticle Systems for Photothermal Therapy

Current approaches for the treatment of cancer, such as chemotherapy, radiotherapy, immunotherapy, and surgery, are limited by various factors, such as inadvertent necrosis of healthy cells, immunological destruction, or secondary cancer development. Hyperthermic therapy is a promising strategy intended to mitigate many of the shortcomings associated with traditional therapeutic approaches. However, to utilize this approach effectively, it must be targeted to specific tumor sites to prevent adverse side effects. In this regard, photothermal therapy, using intravenously-administered nanoparticle materials capable of eliciting hyperthermic effects in combination with the precise application of light in the near-infrared spectrum, has shown promise. Many different materials have been proposed, including various inorganic materials such as Au, Ag, and Germanium, and C-based materials. Unfortunately, these materials are limited by concerns about accumulation and potential cytotoxicity. Polymer-based nanoparticle systems have been investigated to overcome limitations associated with traditional inorganic nanoparticle systems. Some of the materials that have been investigated for this purpose include polypyrrole, poly-(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS), polydopamine, and polyaniline. The purpose of this review is to summarize these contemporary polymer-based nanoparticle technologies to acquire an understanding of their current applications and explore the potential for future improvements.

Metal-Organic Framework as a Microreactor for in Situ Fabrication of Multifunctional Nanocomposites for Photothermal-Chemotherapy of Tumors in Vivo

Metal-organic frameworks (MOFs) have been applied in chemotherapeutic drug loading for cancer treatment, but challenging for cases with large and malignant lesions. To overcome these difficulties, combinational therapies of chemotherapy and photothermal therapy (PTT) with potentially high selectivity and slight aggressiveness have drawn tremendous attention to treat various tumors. However, current MOF-based nanohybrids with photothermal agents involve tedious synthesis processes and heterogeneous structures. Herein, we employ MIL-53 as a microreactor to grow polypyrrole (PPy) nanoparticles in situ for the fabrication of PPy@MIL-53 nanocomposites. Fe³⁺ in MIL-53, as an intrinsic oxidizing agent, can oxidize the pyrrole monomer to generate PPy nanoparticles. The prepared PPy@MIL-53 nanocomposites integrate the intrinsic advantages of MOFs with high drug loading ability and magnetic resonance imaging (MRI) capacity, and PPy nanoparticles with outstanding PTT ability and excellent biocompatibility. The versatile PPy@MIL-53 nanocomposites with multiple functions displayed in vitro and in vivo synergism of photothermal-chemotherapy for cancer, potentially MRI-guided. The proposed MOF microreactor-based synthesis strategy shows a promising prospect in the fabrication of diverse multifunctional nanohybrids for tumor theranostics in vivo.

Multifunctional System Polyaniline-Decorated ZIF-8 Nanoparticles as a New Chemo-Photothermal Platform for Cancer Therapy

Polyaniline-decorated ZIF-8 nanoparticles (nPANI@nZIF-8) were easily synthesized and employed as a multifunctional system for the delivery of the antitumor drug 5-fluorouracil (5-FU). Because of the storage ability of the network ZIF-8, 68% of the total amount of the 5-FU drug was released at pH 5.2. The system exhibits absorption in the near-infrared (NIR) region and can be used in the photothermal therapy owing to the presence of nPANI, which has a strong NIR uptake. This absorption causes local hyperthermia by aiding in the diffusion of the drug molecules contained by the polymer into nPANI@nZIF-8/5-FU achieving a greater release of the 5-FU drug, about 80% activated by an NIR laser (λ = 980 nm). This hyperthermia reached about 70 °C (200 μL, 1 mg mL-1 nPANI@nZIF-8), which was directly proportional to the concentration of the material. Therefore, our work can aid in the construction of new chemo-photothermal platforms that may be employed in cancer therapy.

Near-infrared light-activatable polymeric nanoformulations for combined therapy and imaging of cancer

Near infrared (NIR) light allows deep tissue penetration and high spatial resolution due to the reduced scattering of long-wavelength photons. NIR light-activatable polymer nanoparticles are widely exploited for enhanced cancer imaging (diagnosis) and therapy owing to their superior photostability, photothermal conversion efficiency (or high emission rate), and minimal toxicity to cells and tissues. This review surveys the most recent advances in the synthesis of different NIR-absorbing and emissive polymer nanoformulations, and their applications for cancer imaging, photothermal therapy, theranostics and combination therapy by delivering multiple small molecule chemotherapeutics. Photo-responsive drug delivery systems for NIR light-triggered drug release are also discussed with particular emphasis on their molecular designs and formulations as well as photo-reaction mechanisms. Finally, outlook and challenges are presented regarding potential clinical applications of NIR light-activatable nanoformulations.