Quantitative HSQC Analyses of Lignin: A Practical Comparison

The role of NMR spectroscopy in lignocellulosic biomass characterisation: A mini review

Lignocellulosic biomass (LB) is promising feedstock for the production of various bio-based products. However, due to its heterogenous character, complex chemical structure and recalcitrance, it is necessary to know its structural composition in order to optimize pretreatment process and further (bio)conversion into bio-based products. Nuclear Magnetic Resonance (NMR) spectroscopy is a fast and reliable method that can provide advanced data on the molecular architecture and composition of lignocellulosic biomass. In this brief overview, characteristic examples of the use of high-resolution NMR spectroscopy for the investigation of various types of LB and their structural units are given and the main drawbacks and future perspectives are outlined.

2-step lignin-first catalytic fractionation with bifunctional Pd/ß-zeolite catalyst in a flow-through reactor

This work demonstrates an additive and hydrogen-free 2-step lignin-first fractionation in flow-through. First, solvolytic delignification renders lignin liquors with its native chemical structure largely intact; and second, ß-zeolite catalytic depolymerization of these liquors leads to similar monomer yields as the corresponding 1-step fractionation process. Higher delignification temperatures lead to slightly lower ß-O-4 content in the solvated lignin, but does not affect significantly the monomer yield, so a higher temperature was overall preferred as it promotes faster delignification. Deposition of Pd on ß-zeolite resulted in a bifunctional hydrogenation/dehydration catalyst, tested during the catalytic depolymerization of solvated lignin with and without hydrogen addition. Pd/ß-zeolite displays synergistic effects (compared to the Pd/γ-Al2 O3 and ß-zeolite tested individually and as a mixed bed), resulting in higher monomer yield. This is likely caused by increased acidity and the proximity between the metallic and acid active sites. Furthermore, different ß-zeolite with varying SAR and textural properties were studied to shed light onto the effect of acidity and porosity in the stabilization of lignin monomers. While some of the catalysts showed stable performance, characterization of the spent catalyst reveals Al leaching (causing acidity loss and changes in textural properties), and some degree of coking and Pd sintering.

Chemometric Combination of Ultrahigh Resolving Mass Spectrometry and Nuclear Magnetic Resonance Spectroscopy for a Structural Characterization of Lignin Compounds

In recent years, the potential of lignins as a resource for material-based applications has been highlighted in many scientific and nonscientific publications. But still, to date, a lack of detailed structural knowledge about this ultracomplex biopolymer undermines its great potential. The chemical complexity of lignin demands a combination of different, powerful analytical methods, in order to obtain these necessary information. In this paper, we demonstrate a multispectroscopic approach using liquid-state and solid-state Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and nuclear magnetic resonance (NMR) spectroscopy to characterize a fractionated LignoBoost lignin. Individual FT-ICR-MS, tandem MS, and NMR results helped to determine relevant information about the different lignin fractions, such as molecular weight distributions, oligomer sizes, linkage types, and presence of specific functional groups. In addition, a hetero spectroscopic correlation approach was applied to chemometrically combine MS, MS/MS, and NMR data sets. From these correlation analyses, it became obvious that a combination of tandem MS and NMR data sets gives the opportunity to comprehensively study and describe the general structure of complex biopolymer samples. Compound-specific structural information are obtainable, if this correlation approach is extended to 1D-MS and NMR data, as specific functional groups or linkages are verifiable for a defined molecular formula. This enables structural characterization of individual lignin compounds without the necessity for tandem MS experiments. Hence, these correlation results significantly improve the depth of information of each individual analysis and will hopefully help to structurally elucidate entire lignin structures in the near future.

Study toward a More Reliable Approach to Elucidate the Lignin Structure-Property-Performance Correlation

The correlation between lignin structure, its properties, and performance is crucial for lignin engineering in high-value products. Currently, a widespread approach is to compare lignins which differ by more than one parameter (i.e., Kraft vs organosolv vs lignosulfonates) in various applications by attributing the changes in their properties/performance specifically to a certain variable (i.e., phenolic -OH groups). Herein, we suggest a novel approach to overcome this issue by changing only one variable at a time while keeping all others constant before investigating the lignin properties/performance. Indulin AT (Ind-AT), a softwood Kraft lignin, was chosen as the model substrate for this study. Selective (analytical) lignin modifications were used to mask/convert specific functionalities, such as aliphatic (AliphOH) including benzylic -OH (BenzOH) and phenolic -OH (PhOH) groups, carboxyl groups (-COOH) and carbonyl groups (CO) via methylation, acetylation, and reduction. The selectivity and completeness of the reactions were verified by comprehensive NMR analysis (31P and 2D HSQC) of the modified preparations together with state-of-the-art molar mass (MM) characterization. Methylene blue (MB) adsorption, antioxidant activity, and glass transition temperature (Tg) were used to demonstrate and compare the properties/performance of the obtained modified lignins. We found that the contribution of different functionalities in the adsorption of MB follows the trend BenzOH > -COOH > AlipOH > PhOH. Noteworthy, benzylic -OH contributes ca. 3 and 2.3 times more than phenolic and aliphatic -OH, respectively. An 11% and 17% increase of Tg was observed with respect to the unmodified Indulin by methylating benzylic -OH groups and through reduction, respectively, while full acetylation/methylation of aliphatic and phenolic -OH groups resulted in lower Tg. nRSI experiments revealed that phenolic -OH play a crucial role in increasing the antioxidant activity of lignin, while both aliphatic -OH groups and -COOHs possess a detrimental effect, most likely due to H-bonding. Overall, for the first time, we provide here a reliable approach for the engineering of lignin-based products in high value applications by disclosing the role of specific lignin functionalities.

Ruthenium ion catalysed C-C bond activation in lignin model compounds - towards lignin depolymerisation

Lignin is the most abundant renewable feedstock to produce aromatic chemicals, however its depolymerisation involves the breaking of several C-O and C-C inter-unit linkages that connect smaller aromatic units that are present in lignin. Several strategies have been reported for the cleavage of the C-O inter-unit linkages in lignin. However, till today, only a few methodologies have been reported for the effective breaking or the conversion of the recalcitrant C-C inter unit linkages in lignin. Here we report the ruthenium ion catalysed oxidative methodology as an effective system to activate or convert the most recalcitrant inter unit linkages such as β-5 and 5-5' present in lignin. Initially, we used biphenyl as a model compound to study the effectiveness of the RICO methodology to activate the 5-5' C-C linkage. After 4 h reaction at 22 °C, we achieved a 30% conversion with 75% selectivity towards benzoic acid and phenyl glyoxal as the minor product. To the best of our knowledge this is the first ever oxidative activation of the C-C bond that connects the two phenyl rings in biphenyl. DFT calculation revealed that the RuO4 forms a [3 + 2] adduct with one of the aromatic C-C bonds resulting in the opening of the phenyl ring. Biphenyl conversion could be increased by increasing the amount of oxidant; however, this is accompanied by a reduction in the carbon balance because of the formation of CO2 and other unknown products. We extended this RICO methodology for the oxidative depolymerisation of lignin model hexamer containing β-5, 5-5' and β-O-4 linkages. Qualitative and quantitative analyses of the reaction mixture were done using 1H, 13C NMR spectroscopy methods along with GC-MS and Gel Permeation Chromatographic (GPC) methods. Advanced 2D NMR spectroscopic methods such as HSQC, HMBC and 31P NMR spectroscopy after phosphitylation of the mixture were employed to quantitatively analyse the conversion of the β-5, 5-5' and β-O-4 linkages and to identify the products. After 30 min, >90% of the 5-5' and linkages and >80% of the β-5' are converted with this methodology. This is the first report on the conversion of the 5-5' linkage in lignin model hexamer.

Investigation of chemical linkages between lignin and carbohydrates in cultured poplar cambium tissues via double isotope labeling

Lignin precursor labeled with ¹³C (coniferin-¹³Cα), carbohydrate precursor labeled with D (6,6-D₂-glucose) were put into cambium tissue stripped from a growing poplar. The tissue was further cultured in vitro for 18d. Then, the isotopic abundance was determined. The results showed that the labeled precursors could be normally involved in the formation of new xylem. The labeled new xylem tissue was fractionated by ionic liquid DMSO/TBAH system to obtain two components: glucan-lignin complex (GL) and xylan-lignin complex (XL). The X-ray diffraction (XRD) results indicated that the crystalline form of cellulose in the GL component was transformed from type I to type II after the ionic liquid separation. Then the GL and XL were purified and modified by enzymatic and chemical methods, and their structures were elucidated by nuclear magnetic resonance (NMR) spectroscopy. The results showed that lignin subunits in the cultured tissues were mainly connected by β-5 and β-O-4 linkages, of which the β-O-4 substructure unit predominated. Lignin and carbohydrates were mainly connected by acetal bonds, ether bonds, and ester bonds. Combined with the carbohydrate composition and XRD analysis results, the GL components also confirmed the existence of acetal bonds, ester bonds and ether bonds between lignin and cellulose.

Practical Aspects of NMR-Based Metabolomics

While NMR-based metabolomics is only about 20 years old, NMR has been a key part of metabolic and metabolism studies for >40 years. Historically, metabolic researchers used NMR because of its high level of reproducibility, superb instrument stability, facile sample preparation protocols, inherently quantitative character, non-destructive nature, and amenability to automation. In this chapter, we provide a short history of NMR-based metabolomics. We then provide a detailed description of some of the practical aspects of performing NMR-based metabolomics studies including sample preparation, pulse sequence selection, and spectral acquisition and processing. The two different approaches to metabolomics data analysis, targeted vs. untargeted, are briefly outlined. We also describe several software packages to help users process NMR spectra obtained via these two different approaches. We then give several examples of useful or interesting applications of NMR-based metabolomics, ranging from applications to drug toxicology, to identifying inborn errors of metabolism to analyzing the contents of biofluids from dairy cattle. Throughout this chapter, we will highlight the strengths and limitations of NMR-based metabolomics. Additionally, we will conclude with descriptions of recent advances in NMR hardware, methodology, and software and speculate about where NMR-based metabolomics is going in the next 5-10 years.

LigninGraphs: lignin structure determination with multiscale graph modeling

Lignin is an aromatic biopolymer found in ubiquitous sources of woody biomass. Designing and optimizing lignin valorization processes requires a fundamental understanding of lignin structures. Experimental characterization techniques, such as 2D-heteronuclear single quantum coherence (HSQC) nuclear magnetic resonance (NMR) spectra, could elucidate the global properties of the polymer molecules. Computer models could extend the resolution of experiments by representing structures at the molecular and atomistic scales. We introduce a graph-based multiscale modeling framework for lignin structure generation and visualization. The framework employs accelerated rejection-free polymerization and hierarchical Metropolis Monte Carlo optimization algorithms. We obtain structure libraries for various lignin feedstocks based on literature and new experimental NMR data for poplar wood, pinewood, and herbaceous lignin. The framework could guide researchers towards feasible lignin structures, efficient space exploration, and future kinetics modeling. Its software implementation in Python, LigninGraphs, is open-source and available on GitHub.

Lignin from Morinda citrifolia leaves: Physical and chemical characterization, in vitro evaluation of antioxidant, cytotoxic, antiparasitic and ultrastructural activities

In this work, we investigated in vitro the antioxidant, cytotoxic and anti-leishmanial activities of a lignin extracted from the leaves of Morinda citrifolia. Initially, an analysis of the composition of the sheets was performed, then the lignin was obtained by alkaline delignification and characterized by different techniques: elemental analysis, FT-R, UV-vis, HSQC-NMR, thermal analysis, Py-GC/MS and by GPC. The results showed that the leaves had in their composition cellulose (31.29%), hemicellulose (25.01%), lignin (18.34%), extractives (14.39%) and ash (10.03%). The lignin extraction yield was 89.8%. The lignin obtained is of the GSH type with the following contents 79.39%, 13.58% and 7.03% respectively. Furthermore, it is low molecular weight and thermally stable. It had a phenolic content of 93.3 mg GAE/g and low antioxidant activity. In macrophage cytotoxicity assays, it presented a CC₅₀ of 31.0 μg/mL, showing less toxicity than amphotericin B. In assays against the promastigote forms of Leishmania amazonensis, lignin presented an IC₅₀ of 29.56 μg/mL, a less effective concentration than amphotericin B (IC₅₀ = 0.14 μg/mL). However, it was able to promote inhibition of the parasites, a fact confirmed by structural changes. These findings reinforce that M. citrifolia lignin is a promising macromolecule for use as an antiparasitic and antioxidant agent.

Phenolic Hydroxyl Groups in the Lignin Polymer Affect the Formation of Lignin Nanoparticles

Alkaline soda lignin (AL) was sequentially fractionated into six fractions of different molecular size by means of solvent extraction and their phenolic hydroxyl groups were chemoselectively methylated to determine their effect on nanoparticle formation of lignin polymers. The effect of the lignin structure on the physical properties of nanoparticles was also clarified in this study. Nanoparticles were obtained from neat alkaline soda lignin (ALNP), solvent-extracted fractions (FALNPs, i.d. 414–1214 nm), and methylated lignins (MALNPs, i.d. 516–721 nm) via the nanoprecipitation method. Specifically, the size properties of MALNPs showed a high negative correlation (R² = 0.95) with the phenolic hydroxyl group amount. This indicates that the phenolic hydroxyl groups in lignin could be influenced on the nucleation or condensation during the nanoprecipitation process. Lignin nanoparticles exhibited high colloidal stability, and most of them also showed good in vitro cell viability. This study presents a possible way to control nanoparticle size by blocking specific functional groups and decreasing the interaction between hydroxyl groups of lignin.

Formation of pure nanoparticles with solvent-fractionated lignin polymers and evaluation of their biocompatibility

This study aimed to determine the effects of lignin characteristics (mainly molecular weight, functional groups, and internal linkages) on nanoparticle formation. First, five different lignin fractions (M_w 1460-12,900) were obtained from commercial kraft lignin (KL) by sequential solvent extraction. Functional groups and internal linkages were determined in lignin fractions, each fraction consisting of different levels and ratios. Second, spherical lignin nanoparticles (i.d. 193-1039 nm) were synthesized by nanoprecipitation at different pre-dialysis concentrations (1, 2, 4, and 6 mg mL^-1 THF) with the different fractions (F1, F2, F3, F4, and F5). The study revealed that larger particles consisted of lignin fractions of lower molecular weight and higher phenolic group content (KL-F1 and F2), while smaller but non-uniform particles were produced from fractions of higher molecular weight and lower phenolic group content (KLF4 and F5). Every zeta potential value of the particle exceeded -35 mV. The nanoparticles from raw kraft lignin exhibited no significant cytotoxicity, hemotoxicity, and hypersensitivity. This study revealed that molecular weight and hydroxyl group content in the lignin highly correlated with nanoparticle properties. The present kraft lignin nanoparticles have potential for use in various polymer-based nanotechnology.

Revealing the structural characteristics of lignin macromolecules from perennial ryegrass during different integrated treatments

To reveal the structural characteristics and physicochemical properties of perennial ryegrass lignin, sequential alkali extractions or double ball-milling and enzymatic hydrolysis on the basis of ultrasonic and hydrothermal pretreatments were proposed in this study. Results revealed that sequential alkali extractions released 89.4% of original lignin from the ryegrass cell walls and 0.75-4.16% of associated carbohydrates as compared to the double ball-milling and enzymatic hydrolysis (96.0% and 18.39%). It was observed that the two types of lignin prepared were SGH-type and had different amounts of p-coumarates and ferulates, and primarily consisted of β-O-4' linkages combined with minor amounts of β-β' and β-5' linkages. Besides, alkali-soluble lignins exhibited relatively fewer β-O-4' linkages, higher S/G ratios and H-type units, and abundant phenolic OH groups as compared to the double enzymatic lignin. Overall, the deeper investigation of the lignin structure of ryegrass will provide useful information for the efficient utilization of lignin macromolecules in biorefineries.

Exploiting the photocatalytic activity of TiO2 towards the depolymerization of Kraft lignin

Lignin is a promising renewable source of aromatic chemicals.

Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectrometry (negative ion mode) of French Oak lignin: A novel series of lignin and tricin derivatives attached to carbohydrate and shikimic acid moieties

RATIONALE

We report the top-down lignomic analysis of the virgin released lignin (VRL) small oligomers obtained from French Oak wood.

METHODS

We have used MALDI-TOF-MS in the negative ion mode for the analysis of the complex mixture of lignin oligomers extracted from French Oak wood. High-energy CID-TOF/TOF-MS/MS analyses were used to support the postulated precursor ion structures.

RESULTS

Twenty compounds were identified using MALDI-TOF-MS/MS of the VRL extracted from French Oak wood: seven tricin derivatives and/or flavonoids, three syringylglycerol derivatives, two syringol derivatives, two flavonolignin derivatives, and six miscellaneous compounds: luteoferol, lariciresinol isomer, 5-hydroxy guaiacyl derivative, syringyl -C₁₀ H₁₀ O₂ dimer, trihydroxy benzaldehyde derivative, and aryl tetralin lignan derivative. Most of the identified compounds were in the form of carbohydrate and/or shikimic acid complexes.

CONCLUSIONS

The analysis of this complex mixture led to the identification of a series of lignin dimers, novel lignin-carbohydrate complexes (LCC), and unique tricin derivatives linked to different types of carbohydrates and shikimic acid moieties. This finding supports the presence of lignin-carbohydrate complexes in the isolated VRL. These analyses also showed that French Oak lignin is abundant in syringol moieties present in the lignin syringyl units or tricin derivatives. Moreover, the identification of some lignin-carbohydrate and/or flavonoid-shikimic acid complexes could provide new insight into the relationship between the biosynthesis of lignin and tricin.

An Introduction to Model Compounds of Lignin Linking Motifs; Synthesis and Selection Considerations for Reactivity Studies

The development of fundamentally new valorization strategies for lignin plays a vital role in unlocking the true potential of lignocellulosic biomass as sustainable and economically compatible renewable carbon feedstock. In particular, new catalytic modification and depolymerization strategies are required. Progress in this field, past and future, relies for a large part on the application of synthetic model compounds that reduce the complexity of working with the lignin biopolymer. This aids the development of catalytic methodologies and in-depth mechanistic studies and guides structural characterization studies in the lignin field. However, due to the volume of literature and the piecemeal publication of methodology, the choice of suitable lignin model compounds is far from straight forward, especially for those outside the field and lacking a background in organic synthesis. For example, in catalytic depolymerization studies, a balance between synthetic effort and fidelity compared to the actual lignin of interest needs to be found. In this Review, we provide a broad overview of the model compounds available to study the chemistry of the main native linking motifs typically found in lignins from woody biomass, the synthetic routes and effort required to access them, and discuss to what extent these represent actual lignin structures. This overview can aid researchers in their selection of the most suitable lignin model systems for the development of emerging lignin modification and depolymerization technologies, maximizing their chances of successfully developing novel lignin valorization strategies.

Molecular Oxygen Lignin Depolymerization: An Insight into the Stability of Phenolic Monomers

During oxidative depolymerization of lignin in aqueous alkaline medium using molecular oxygen as oxidant, the highly functionalized primary phenolic monomers are not stable products, owing to various not fully identified secondary reaction mechanisms. However, better understanding of the mechanisms responsible for the instability of the main part of the products of interest derived from lignin is of much interest. Evaluation of their individual reactivities under oxidative conditions should significantly help to find a better way to valorize the lignin polymer and to maximize the yields of target value-added products. Consequently, the main objective of this study is to assess the individual stabilities of some selected lignin-based phenolic compounds, such as vanillin, vanillic acid, and acetovanillone, together with some other pure chemical compounds such as phenol and anisole to give an insight into the mechanisms responsible for the simultaneous formation and repolymerization of those products and the influence of the oxidation conditions. Various complementary strategies of stabilization are proposed, discussed, and applied for the oxidative depolymerization reactions of a technical lignin extracted from pinewood with a high content of β-O-4 interconnecting bonds to try to obtain enhanced yields of value-added products.

Preparation, Thermal, and Mechanical Characterization of UV-Cured Polymer Biocomposites with Lignin

The preparation and the thermal and mechanical characteristics of lignin-containing polymer biocomposites were studied. Bisphenol A glycerolate (1 glycerol/phenol) diacrylate (BPA.GDA) was used as the main monomer, and butyl acrylate (BA), 2-ethylhexyl acrylate (EHA) or styrene (St) was used as the reactive diluent. Unmodified lignin (L) or lignin modified with methacryloyl chloride (L-M) was applied as an ecofriendly component. The influences of the lignin, its modification, and of the type of reactive diluent on the properties of the composites were investigated. In the biocomposites with unmodified lignin, the lignin mainly acted as a filler, and it seemed that interactions occurred between the hydroxyl groups of the lignin and the carbonyl groups of the acrylates. When methacrylated lignin was applied, it seemed to take part in the creation of a polymer network. When styrene was added as a reactive diluent, the biocomposites had a more homogeneous structure, and their thermal resistance was higher than those with acrylate monomers. The use of lignin and its methacrylic derivative as a component in polymer composites promotes sustainability in the plastics industry and can have a positive influence on environmental problems related to waste generation.

Determination of hydroxyl groups in biorefinery resources via quantitative 31P NMR spectroscopy

The analysis of chemical structural characteristics of biorefinery product streams (such as lignin and tannin) has advanced substantially over the past decade, with traditional wet-chemical techniques being replaced or supplemented by NMR methodologies. Quantitative ³¹P NMR spectroscopy is a promising technique for the analysis of hydroxyl groups because of its unique characterization capability and broad potential applicability across the biorefinery research community. This protocol describes procedures for (i) the preparation/solubilization of lignin and tannin, (ii) the phosphitylation of their hydroxyl groups, (iii) NMR acquisition details, and (iv) the ensuing data analyses and means to precisely calculate the content of the different types of hydroxyl groups. Compared with traditional wet-chemical techniques, the technique of quantitative ³¹P NMR spectroscopy offers unique advantages in measuring hydroxyl groups in a single spectrum with high signal resolution. The method provides complete quantitative information about the hydroxyl groups with small amounts of sample (~30 mg) within a relatively short experimental time (~30-120 min).

Pyrolytic Behavior of Major Biomass Components in Waste Biomass

The pyrolytic behavior of several biomass components including cellulose, hemicellulose, lignin, and tannin, from two sources of waste biomass (i.e., pine bark and pine residues) were examined. Compared to the two aromatic-based components in the biomass, carbohydrates produced much less char but more gas. Surprisingly, tannin produced a significant amount of water-soluble products; further analysis indicated that tannin could produce a large amount of catechols. The first reported NMR chemical shift databases for tannin and hemicellulose pyrolysis oils were created to facilitate the HSQC analysis. Various C⁻H functional groups (>30 different C⁻H bonds) in the pyrolysis oils could be analyzed by employing HSQC-NMR. The results indicated that most of the aromatic C⁻H and aliphatic C⁻H bonds in the pyrolysis oils produced from pine bark and pine residues resulted from the lignin and tannin components. A preliminary study for a quantitative application of HSQC-NMR on the characterization of pyrolysis oil was also done in this study. Nevertheless, the concepts established in this work open up new methods to fully characterize the whole portion of pyrolysis oils produced from various biomass components, which can provide valuable information on the thermochemical mechanisms.

Replacing calcium with ammonium counterion in lignosulfonates from paper mills affects their molecular properties and bioactivity

Lignosulfonates are important by-products of the paper industry and may be transformed into different commodities. We studied the molecular properties of ammonium (LS-AM) and calcium Lignosulfonates (LS-C) and evaluated their bioactivity towards the early development of maize plantlets. The FT-IR, ¹³C NMR and ¹H-¹³C-HSQC-NMR spectra showed that the two lignosulfonates varied in hydroxyl, sulfonate and phenolic content, while DOSY-NMR spectroscopy suggested a similar diffusivity. High Performance Size Exclusion Chromatography (HPSEC) was used to simulate the effects of root-exuded acids and describe the conformational dynamics of both LS substrates in acidic aqueous solutions. This technique showed that LS-C was stabilized by the divalent Ca²⁺ counterion, thus showing a greater conformational stability than LS-AM, whose components could not be as efficiently aggregated by the monovalent NH4⁺ counter-ion. The plant bioassays revealed that LS-AM enhanced the elongation of the root system, whereas LS-C significantly increased both total and shoot plant weights. We concluded that the lignosulfonate bioactivity on plant growth depended on the applied concentrations, their molecular properties and conformational stability.

Treatment of Coffee Husk with Ammonium-Based Ionic Liquids: Lignin Extraction, Degradation, and Characterization

Four ammonium-based ionic liquids were synthesized for the selective extraction and degradation of lignin from coffee husk. The extracted lignin samples were characterized by Fourier transform infrared, gel permeation chromatography, gas chromatography-mass spectrometry, UV-vis, ¹H and ¹³C NMR, heteronuclear single-quantum coherence-NMR, thermogravimetric analysis, X-ray diffraction, and field emission scanning electron microscopy analyses. The analyzed results confirmed that these ionic liquids are able to effectively extract and decompose the lignin to smaller molecules from the biomass. Experimental results show that a significantly high yield, 71.2% of the original lignin, has been achieved. This processing method is an efficient, economical, and environmentally friendly green route for producing high-added-value lignin from wasted coffee husk.

Identification of a diagnostic structural motif reveals a new reaction intermediate and condensation pathway in kraft lignin formation

Kraft lignin, the main by-product of the pulping industry, is an abundant, yet highly underutilized renewable aromatic polymer. During kraft pulping, the lignin undergoes extensive structural modification, with many labile native bonds being replaced by new, more recalcitrant ones. Currently little is known about the nature of those bonds and linkages in kraft lignin, information that is essential for its efficient valorization to renewable fuels, materials or chemicals. Here, we provide detailed new insights into the structure of softwood kraft lignin, identifying and quantifying the major native as well as kraft pulping-derived units as a function of molecular weight. De novo synthetic kraft lignins, generated from (isotope labelled) dimeric and advanced polymeric models, provided key mechanistic understanding of kraft lignin formation, revealing different process dependent reaction pathways to be operating. The discovery of a novel kraft-derived lactone condensation product proved diagnostic for the identification of a previously unknown homovanillin based condensation pathway. The lactone marker is found in various different soft- and hardwood kraft lignins, suggesting the general pertinence of this new condensation mechanism for kraft pulping. These novel structural and mechanistic insights will aid the development of future biomass and lignin valorization technologies.

Laccase-Catalyzed Synthesis of Low-Molecular-Weight Lignin-Like Oligomers and their Application as UV-Blocking Materials

The laccase-catalyzed oxidative polymerization of monomeric and dimeric lignin model compounds was carried out with oxygen as the oxidant in aqueous medium. The oligomers were characterized by using gel permeation chromatography (GPC) and matrix-assisted laser desorption ionization time-of-flight mass spectroscopy (MALDI-TOF MS) analysis. Oxidative polymerization led to the formation of oligomeric species with a number-average molecular weight (M_n ) that ranged from 700 to 2300 Da with a low polydispersity index. Spectroscopic analysis provided insight into the possible modes of linkages present in the oligomers, and the oligomerization is likely to proceed through the formation of C-C linkages between phenolic aromatic rings. The oligomers were found to show good UV light absorption characteristics with high molar extinction coefficient (5000-38 000 m^-1  cm^-1 ) in the UV spectral region. The oligomers were blended independently with polyvinyl chloride (PVC) by using solution blending to evaluate the compatibility and UV protection ability of the oligomers. The UV/Vis transmittance spectra of the oligomer-embedded PVC films indicated that these lignin-like oligomers possessed a notable ability to block UV light. In particular, oligomers obtained from vanillyl alcohol and the dimeric lignin model were found to show good photostability in accelerated UV weathering experiments. The UV-blocking characteristics and photostability were finally compared with the commercial low-molecular-weight UV stabilizer 2,4-dihydroxybenzophenone.

Fractionation and DOSY NMR as Analytical Tools: From Model Polymers to a Technical Lignin

One key challenge hindering the valorization of lignin is its structural complexity. Artificial lignin-like materials provide a stepping stone between the simplicity of model compounds and the complexity of lignin. Here, we report an optimized synthesis of an all-G β-O-4 polymer 1 designed to model softwood lignin. After acetylation, the polymer Ac-1(V) was fractionated using a protocol that involved only volatile organic solvents, which left no insoluble residue. Using diffusion ordered spectroscopy NMR in combination with gel permeation chromatography, it was revealed that this fractionated material behaved like a flexible linear polymer in solution (average α > 0.5). Acetylated kraft lignin was subsequently processed using the same fractionation protocol. By comparison with the model polymer, we propose that the acetylated kraft lignin is composed of two classes of materials that exhibit contrasting physical properties. One is comparable to the acetylated all-G β-O-4 polymer Ac-1, and the second has a significantly different macromolecular structure.

Plant metabolism as studied by NMR spectroscopy

The study of plant metabolism impacts a broad range of domains such as plant cultural practices, plant breeding, human or animal nutrition, phytochemistry and green biotechnologies. Plant metabolites are extremely diverse in terms of structure or compound families as well as concentrations. This review attempts to illustrate how NMR spectroscopy, with its broad variety of experimental approaches, has contributed widely to the study of plant primary or specialized metabolism in very diverse ways. The review presents recent developments of one-dimensional and multi-dimensional NMR methods to study various aspects of plant metabolism. Through recent examples, it highlights how NMR has proved to be an invaluable tool for the global characterization of sample composition within metabolomic studies, and shows some examples of use for targeted phytochemistry, with a special focus on compound identification and quantitation. In such cases, NMR approaches are often used to provide snapshots of the plant sample composition. The review also covers dynamic aspects of metabolism, with a description of NMR techniques to measure metabolic fluxes - in most cases after stable isotope labelling. It is mainly intended for NMR specialists who would be interested to learn more about the potential of their favourite technique in plant sciences and about specific details of NMR approaches in this field. Therefore, as a practical guide, a paragraph on the specific precautions that should be taken for sample preparation is also included. In addition, since the quality of NMR metabolic studies is highly dependent on approaches to data processing and data sharing, a specific part is dedicated to these aspects. The review concludes with perspectives on the emerging methods that could change significantly the role of NMR in the field of plant metabolism by boosting its sensitivity. The review is illustrated throughout with examples of studies selected to represent diverse applications of liquid-state or HR-MAS NMR.

Challenges and perspectives in quantitative NMR

This perspective article summarizes, from the author's point of view at the beginning of 2016, the major challenges and perspectives in the field of quantitative NMR. The key concepts in quantitative NMR are first summarized; then, the most recent evolutions in terms of resolution and sensitivity are discussed, as well as some potential future research directions in this field. A particular focus is made on methodologies capable of boosting the resolution and sensitivity of quantitative NMR, which could open application perspectives in fields where the sample complexity and the analyte concentrations are particularly challenging. These include multi-dimensional quantitative NMR and hyperpolarization techniques such as para-hydrogen-induced polarization or dynamic nuclear polarization. Because quantitative NMR cannot be dissociated from the key concepts of analytical chemistry, i.e. trueness and precision, the methodological developments are systematically described together with their level of analytical performance. Copyright © 2016 John Wiley & Sons, Ltd.

Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering, Biorefining and Catalysis

Lignin is an abundant biopolymer with a high carbon content and high aromaticity. Despite its potential as a raw material for the fuel and chemical industries, lignin remains the most poorly utilised of the lignocellulosic biopolymers. Effective valorisation of lignin requires careful fine-tuning of multiple "upstream" (i.e., lignin bioengineering, lignin isolation and "early-stage catalytic conversion of lignin") and "downstream" (i.e., lignin depolymerisation and upgrading) process stages, demanding input and understanding from a broad array of scientific disciplines. This review provides a "beginning-to-end" analysis of the recent advances reported in lignin valorisation. Particular emphasis is placed on the improved understanding of lignin's biosynthesis and structure, differences in structure and chemical bonding between native and technical lignins, emerging catalytic valorisation strategies, and the relationships between lignin structure and catalyst performance.

¹H-¹³C HSQC NMR spectroscopy for estimating procyanidin/prodelphinidin and cis/trans-flavan-3-ol ratios of condensed tannin samples: correlation with thiolysis

Studies with a diverse array of 22 purified condensed tannin (CT) samples from nine plant species demonstrated that procyanidin/prodelphinidin (PC/PD) and cis/trans-flavan-3-ol ratios can be appraised by (1)H-(13)C HSQC NMR spectroscopy. The method was developed from samples containing 44-∼100% CT, PC/PD ratios ranging from 0/100 to 99/1, and cis/trans ratios ranging from 58/42 to 95/5 as determined by thiolysis with benzyl mercaptan. Integration of cross-peak contours of H/C-6' signals from PC and of H/C-2',6' signals from PD yielded nuclei-adjusted estimates that were highly correlated with PC/PD ratios obtained by thiolysis (R(2) = 0.99). cis/trans-Flavan-3-ol ratios, obtained by integration of the respective H/C-4 cross-peak contours, were also related to determinations made by thiolysis (R(2) = 0.89). Overall, (1)H-(13)C HSQC NMR spectroscopy appears to be a viable alternative to thiolysis for estimating PC/PD and cis/trans ratios of CT if precautions are taken to avoid integration of cross-peak contours of contaminants.