Synthesis and characterization of iron oxide nanoparticles from Lawsonia inermis and its effect on the biodegradation of crude oil hydrocarbon

Crude oil hydrocarbons are considered major environmental pollutants and pose a significant threat to the environment and humans due to having severe carcinogenic and mutagenic effects. Bioremediation is one of the practical and promising technology that can be applied to treat the hydrocarbon-polluted environment. In this present study, rhamnolipid biosurfactant (BS) produced by Pseudomonas aeruginosa PP4 and green synthesized iron nanoparticles (G-FeNPs) from Lawsonia inermis was used to evaluate the biodegradation efficiency (BE) of crude oil. The surface analysis of G-FeNPs was carried out by using FESEM and HRTEM to confirm the size and shape. Further, the average size of the G-FeNPs was observed around 10 nm by HRTEM analysis. The XRD and Raman spectra strongly confirm the presence of iron nanoparticles with their respective peaks. The BE (%) of mixed degradation system-V (PP4+BS+G-FeNPs) was obtained about 82%. FTIR spectrum confirms the presence of major functional constituents (C=O, -CH3, C-O, and OH) in the residual oil content. Overall, this study illustrates that integrated nano-based bioremediation could be an efficient approach for hydrocarbon-polluted environments. This study is the first attempt to evaluate the G-FeNPs with rhamnolipid biosurfactant on the biodegradation of crude oil.

Development of an environmentally sustainable technique to minimize the sludge production in the textile effluent sector through an electrokinetic (EK) coupled with electrooxidation (EO) approach

This study presents an environmentally sustainable method for minimizing sludge production in the textile effluent sector through the combined application of electrokinetic (EK) and electrooxidation (EO) processes. AAS and XRF analyses reveal that utilizing acidic electrolytes in the EK method successfully eliminates heavy metals (Cu, Mn, Zn, and Cr) from sludge, demonstrating superior efficiency compared to alkaline conditions. In addition, the total removal efficiency of COD contents was calculated following the order of EK-3 (60%), EK-1 (51%) and EK-2 (34%). Notably, EK-3, leveraging pH gradient fluctuations induced by anolyte in the catholyte reservoir, outperforms other EK systems in removing COD from sludge. The EK process is complemented by the EO process, leading to further degradation of dye and other organic components through the electrochemical generation of hypochlorite (940 ppm). At an alkaline pH of 10.0, the color and COD removal were effectively achieved at 98 and 70% in EO treatment, compared to other mediums. In addition, GC-MS identified N-derivative residues at the end of the EO. This study demonstrates an integrated approach that effectively eliminates heavy metals and COD from textile sludge, combining EK with EO techniques.

Filamentous marine Gram-positive Nocardiopsis dassonvillei biofilm as biocathode and its electron transfer mechanism

This study investigated electrochemical characteristics of Gram-positive, Nocardiopsis dassonvillei B17 facultative bacterium in bioelectrochemical systems. The results demonstrated that anodic and cathodic reaction rates were catalyzed by this bacterium, especially by utilization of aluminium alloy as a substrate. Cyclic voltammogram results depicted an increase of peak current and surface area through biofilm development, confirming its importance on catalysis of redox reactions. Phenazine derivatives were detected and their electron mediating behavior was evaluated exogenously. A symmetrical redox peak in the range of -59 to -159 mV/SHE was observed in cyclic voltammogram of bacterial solution supplemented with 12 μM phenazine, a result consistent with cyclic voltammogram of a 5-d biofilm, confirming its importance as an electron mediator in extracellular electron transfer. Furthermore, the dependency of bacterial catalysis and polarization potential were studied. These results suggested that B17 biofilm behaved as a biocathode and transferred electrons to bacterial cells through a mechanism associated with electron mediators.

Electrochemical oxidation of azo dyes degradation by RuO2-IrO2-TiO2 electrode with biodegradation Aeromonas hydrophila AR1 and its degradation pathway: An integrated approach

Azo dyes are the most varied class of synthetic chemicals with non-degradable characteristics. They are complex compounds made up of many different parts. It was primarily utilized for various application procedures in the dyeing industry. Therefore, it's crucial to develop an economical and environmentally friendly approach to treating azo dyes. Our present investigation is an integrated approach to the electrooxidation (EO) process of azo dyes using RuO2-IrO2-TiO2 (anode) and titanium mesh (cathode) electrodes, followed by the biodegradation process (BD) of the treated EO dyes. Chemical oxygen demand (COD) removal efficiency as follows MB (55%) ≥ MR (45%) ≥ TB (38%) ≥ CR (37%) correspondingly. The fragment generated during the degradation process which was identified with high-resolution mass spectrometry (HRMS) and its degradation mechanism pathway was proposed as demethylation reaction and N-N and C-N/C-S cleavage reaction occurs during EO. In biodegradation studies by Aeromonas hydrophila AR1, the EO treated dyes were completely mineralized aerobically which was evident by the COD removal efficiency as MB (98%) ≥ MR (92.9%) ≥ TB (88%) ≥ CR (87%) respectively. The EO process of dyes produced intermediate components with lower molecular weights, which was effectively utilized by the Aeromonas hydrophila AR1 and resulted in higher degradation efficiency 98%. We reported the significance of the enhanced approach of electrochemical oxidation with biodegradation studies in the effective removal of the pollutants in dye industrial effluent contaminated water environment.

Larvicidal and anti-termite activities of microbial biosurfactant produced by Enterobacter cloacae SJ2 isolated from marine sponge Clathria sp

The widespread use of synthetic pesticides has resulted in a number of issues, including a rise in insecticide-resistant organisms, environmental degradation, and a hazard to human health. As a result, new microbial derived insecticides that are safe for human health and the environment are urgently needed. In this study, rhamnolipid biosurfactants produced from Enterobacter cloacae SJ2 was used to evaluate the toxicity towards mosquito larvae (Culex quinquefasciatus) and termites (Odontotermes obesus). Results showed dose dependent mortality rate was observed between the treatments. The 48 h LC50 (median lethal concentration) values of the biosurfactant were determined for termite and mosquito larvae following the non-linear regression curve fit method. Results showed larvicidal activity and anti-termite activity of biosurfactants with 48 h LC50 value (95% confidence interval) of 26.49 mg/L (25.40 to 27.57) and 33.43 mg/L (31.09 to 35.68), respectively. According to a histopathological investigation, the biosurfactant treatment caused substantial tissue damage in cellular organelles of larvae and termites. The findings of this study suggest that the microbial biosurfactant produced by E. cloacae SJ2 is an excellent and potentially effective agent for controlling Cx. quinquefasciatus and O. obesus.

Sequential photo electro oxidation and biodegradation of textile effluent: Elucidation of degradation mechanism and bacterial diversity

Textile effluent contains a highly toxic and refractory azo dyes. Eco-friendly method for efficient decolorization and degradation of textile effluent is essential. In the present study, treatment of textile effluent was carried through sequential electro oxidation (EO) and photo electro oxidation (PEO) using RuO₂-IrO₂ coated titanium electrode as an anode and cathode followed by biodegradation. The pre-treatment of textile effluent by photo electro oxidation for 14 h exhibited 92% of decolorization. Subsequent biodegradation of the pre-treated textile effluent enhanced the reduction of chemical oxygen demand to 90%. Metagenomics results exhibited that Flavobacterium, Dietzia, Curtobacterium, Mesorhizobium, Sphingobium, Streptococcus, Enterococcus, Prevotellaand Stenotrophomonas bacterial communities majorly involved in the biodegradation of textile effluent. Hence, integrating sequential photo electro oxidation and biodegradation proposed an efficient and eco-friendly approach for treating textile effluent.

Potential use of bio functionalized nanoparticles to attenuate triple negative breast cancer (MDA-MB-231 cells)

This study showed that bio-functional silver nanoparticles (AgNPs) and zinc oxide nanoparticles (ZnONPs) were synthesized in aqueous extracts of Gymnema sylvestre leaves and tested for toxicity assessment against triple-negative breast cancer cells (TNBC). Biofunctional nanoparticle (NPs) samples were characterized using UV-Vis spectroscopy, FT-IR, XRD, SEM, and TEM. The results showed that the phytofabrication of AgNPs resulted in a dark brown, UV-vis maximum absorbance peak at 413 nm. The AgNPs were crystalline and spherical, with sizes ranging from 20 to 60 nm, as confirmed by the XRD pattern and TEM images. Another phytofabrication of ZnONPs exhibited a white precipitate corresponding to a UV-Vis maximum absorption peak at 377 nm and a fine micro flower morphology with a particle-sized tribution between 100 and 200 nm. In addition, FT-IR spectra showed that bioorganic compounds are associated with NPs that respond to reduced Ag⁺ ions and AgNPs tabilizers. Invitro cytotoxicity studies revealed the potent anti-cancer effects of phytofabricated AgNPs and ZnONPs on TNBC cells. Furthermore, the AO/EB double staining assay results proved that apoptotic cells are distinguished by greenish-yellow fluorescence of the cell nuclei with IC₅₀ concentrations of 44 ± 0.8 µg/mL for AgNPs and 26.2 ± 0.5 µg/mL for ZnONPs, respectively. Based on our results, we expect that the anticancer function of the biofunctional NPs is due to the apoptotic activation of TNBC cells by increased ROS. Therefore, the presented study demonstrated that biofunctional AgNPs and ZnONPs have excellent prospects for the anti-cancer activity that can be used in pharmaceutical and medical fields.

Intimately coupled gC3N4 photocatalysis and mixed culture biofilm enhanced detoxification of sulfamethoxazole: Elucidating degradation mechanism and toxicity assessment

In recent years, wide spread of antibiotic-resistant microorganisms and genes emerging globally, an eco-friendly method for efficient degradation of antibiotics from the polluted environment is essential. Intimately coupled photocatalysis and biodegradation (ICPB) using gC₃N₄ for enhanced degradation of sulfamethoxazole (SMX) was investigated. The gC₃N₄ were prepared and coated on the carbon felt. The mixed culture biofilm was developed on the surface as a biocarrier. The photocatalytic degradation showed 74%, and ICPB exhibited 95% SMX degradation efficiency. ICPB showed superior visible light adsorption, photocatalytic activity, and reduced charge recombination. The electron paramagnetic resonance spectrum confirms that the generation of •OH and O₂• radicals actively participated in the degradation of SMX into biodegradable intermediated compounds, and then, the bacterial communities present in the biofilm mineralized the biodegradable compound into carbon dioxide and water. Moreover, the addition of NO₃^-, PO₄^-, and Cl^- significantly enhanced the degradation efficiency by trapping the surface electron. Stability experiments confirmed that gC₃N₄ biohybrid can maintain 85% SMX degradation efficiency after 5 consecutive recycling. Extracellular polymeric substances characterization results show that biohybrid contains 47 mg/L, 14 mg/L, and 13 mg/L protein, carbohydrate, and humic acid, respectively, which can protect the bacterial communities from the antibiotic toxicity and reactive oxygen species. Furthermore, biotoxicity was investigated using degradation products on E.coli and results revealed 83% detoxification efficiency. Overall, this study suggested that gC₃N₄ photocatalyst in an ICPB can be used as a promising eco-friendly method to degrade sulfamethoxazole efficiently.

Synthesis of silver nanoparticles from Indian red yeast rice and its inhibition of biofilm in copper metal in cooling water environment

The development of environmentally acceptable benign techniques using purely natural methods is a cost-effective procedure with long-term benefits in all areas. With this consideration, myco synthesized silver nano particles (AgNPs) were studied and it acted as an impending corrosion inhibitor in the environment. Initially, AgNPs were evaluated by physical and surface characterizations and this evidence demonstrated that RYRE's water-soluble molecules played an essential role in the synthesis of AgNPs in nano spherical size. The myco synthesized of AgNPs has showed an antibacterial activity against corrosive bacteria in cooling water system (CWS). Hence, the AgNPs were used in biocorrosion studies as an anticorrosive agent along with AgNO₃ and RYRE was also checked. For this experiment, the copper (Cu) metal (CW024) which is commonly used was selected, the result of corrosion rate was decreased, and inhibition efficiency (82%) was higher in the presence of AgNPs in system IV. Even though, AgNO₃ and RYRE had contributed significant inhibition efficiency on Cu at 47% and 61%, respectively. According to XRD, the reaction of AgNPs on Cu metal resulted in the formation of a protective coating of Fe₂O₃ against corrosion. EIS data also indicated that it could reduce the corrosion on the Cu metal surface. All of these findings point out the possibility that the myco-synthesized AgNPs were an effective copper metal corrosion inhibitor. As a result, we encourage the development of myco-synthesized AgNPs, which could be useful in the industrial settings.

Characterization of petroleum degrading bacteria and its optimization conditions on effective utilization of petroleum hydrocarbons

Hydrocarbon contamination is continuing to be a serious environmental problem because of their toxicity. Hydrocarbon components have been known to be carcinogens and neurotoxic organic pollutants. The physical and chemical methods of petroleum removal have become ineffective and also are very costly. Therefore, bioremediation is considered the promising technology for the treatment of these contaminated sites since it is cost-effective and will lead to complete mineralization.The current study also concentrates on bioremediation of petroleum products by bacterium isolated from petroleum hydrocarbon contaminated soil. The current work shows that bacterial strains obtained from a petroleum hydrocarbon contaminated environment may degrade petroleum compounds. Two strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were identified as petroleum-degrading bacteria of the isolated bacterial colonies. The best growth conditions for the ARMP2 strain were determined to be pH 9, temperature 29 °C with sodium nitrate as its nitrogen source, whereas for the ARMP8 strain the optimal growth was found at pH 7, temperature 39 °C, and ammonium chloride as the nitrogen source. Both strains were shown to be effective at degrading petroleum chemicals confirmed by GCMS. Overall petroleum product degradation efficiency of the strains ARMP2 and ARMP8 was about 88 % and 73 % respectively in 48 h.The strains Bacillus licheniformis ARMP2 and Pseudomonas aeruginosa ARMP8 were shown to be effective at degrading petroleum compounds in the current study. Even greater results might be obtained if the organisms were utilised in consortia or the degradation time period was extended.

Characterization of two novel strains of Pseudomonas aeruginosa on biodegradation of crude oil and its enzyme activities

Crude oil contaminant is one of the major problem to environment and its removal process considered as most challenging tool currently across the world. In this degradation study, crude oil hydrocarbons are degraded on various pH optimization conditions (pH 2, 4,6,7,8 and 10) by using two biosurfactant producing bacterial strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4. During crude oil biodegradation, degradative enzymes alkane hydroxylase and alcohol dehydrogenase were examined and found to be higher in PP4 than PP3. Biodegradation efficiency (BE) of crude oil by both PP3 and PP4 were analysed by gas chromatography mass spectroscopy (GCMS). Based on strain PP3, the highest BE was observed in pH 2 and pH 4 were found to be 62% and 69% than pH 6, 7, 8 and 10 (47%, 47%, 49% and 45%). It reveals that PP3 was survived effectively in acidic condition and utilized the crude oil hydrocarbons. In contrast, the highest BE of PP4 was observed in pH 7 (78%) than pH4 (68%) and pH's 2, 6, 8 and 10 (52%, 52%, 43% and 53%) respectively. FTIR spectra results revealed that the presence of different functional group of hydrocarbons (OH, -CH₃, CO, C-H) in crude oil. GCMS results confirmed that both strains PP3 and PP4 were survived in acidic condition and utilized the crude oil hydrocarbons as sole carbon sources. This is the first observation on biodegradation of crude oil by the novel strains of Pseudomonas aeruginosa in acidic condition with higher BE. Overall, the extracellular enzymes and surface active compounds (biosurfactant) produced by bacterial strains were played a key role in crude oil biodegradation process.

Macrolepiota-mediated synthesized silver nanoparticles as a green corrosive inhibitor for mild steel in re-circulating cooling water system

A simple, cost effective and eco-friendly silver nanoparticle (AgNPs) was synthesized by wild edible Macrolepiota mushroom. Nanoparticles were characterized by UV-visible, FTIR, XRD analysis and TEM analysis. The characterized studies confirmed the spherical shape of AgNPs with 20-50 nm size. Biocorrosion efficacy of myco-synthesized AgNPs and the mushroom extract were tested against mild steel by corrosive bacteria Bacillus thuringiensis EN2, Terribacillus aidingensis EN3 and Bacillus oleronius EN9. Weight loss analysis, EIS, and surface analysis were used to evaluate the corrosion inhibition efficiency of mild steel in various experimental systems. Reduced corrosion rate (0.07 mm/y, 0.14 mm/y), reduced weight loss (0.006 ± 2, 0.011 ± 2) and increased corrosion inhibition efficiency (59%, 18%) were identified in both system II and system IV. Peak intensity was reduced in both surface analysis studies (FTIR and XRD) in the presence of mushroom extract and AgNPs. EIS studies reveal that the mushroom extract and AgNPs act as a corrosive green inhibitor and adsorbs on the mild steel surfaces in cooling water tower system, which are responsible for corrosion protection.

Biofilm formation on copper and its control by inhibitor/biocide in cooling water environment

The present study has successfully identified the nitrate reducing bacteria present in the cooling water system and also investigated the performance of industrially applied biocide and inhibitor on the bacterial inhibition. In order to carry out the objective of this study, facilities and methods such as 16S rRNA gene sequencing, Lowry assay, SEM, EIS, ICP-MS and weight loss analysis were being utilized. In this study, two out of the five morphologically dis- similar colonies identified through 16S rRNA gene sequencing, namely the Massilia timonae and the Pseudomonas, were being utilized in the biocorrosion study on copper metal. From the surface analysis using SEM demonstrated the phenomenon of biofilm formation on the copper surface. 2-methylbenzimidazole has the addition of methyl group in the diazole ring position of benzimidazole it has create basicity environment and inhibit the metal deterioration. Meanwhile, it is also deducible from the EIS and protein analysis that com- bination of biocide with either of the inhibitors gives rise to better biocorrosion suppression (0.00178 mpy and 0.00171mpy) as compared to the sole effect of either biocide or inhibitor (0.00219 mpy, 0.00162 and 0.00143). Biocorrosion system biocide with MBM was found to exhibit 65% corrosion inhibition efficiency. Moreover, adoption of 2-Methylbenzimidazole seems to display better performance as compared to Multionic 8151, which is adopted in cooling water system.

Novel synthesis of ZnO by Ice-cube method for photo-inactivation of E. coli

The ZnO particle with varieties of morphology was prepared from ice-cube of zinc ammonium complex at boiling water surface in 1 min induction of thermal shock. The zinc ammonium complex in ice cube was developed using zinc acetate and biologically activated ammonia in 1 hr and kept in the freezer. Temperature gradient behaviour of the water medium during thermal shock was captured by the thermal camera and thermometer. Morphology study revealed a variety of flower-like ZnO particles with variable size from 1.0 to 2.5 μm. Further, ZnO particle morphologies were tuned by adding trisodium citrate and hexamine to obtain uniform spherical (2–3 μm) and flower (3–4 μm) shapes, respectively. XRD patterns revealed that all ZnO samples are of a hexagonal structure. Photocatalytic inactivation of E. coli has been investigated using various particle morphologies of ZnO in an aqueous solution/overcoated glass slide under sunlight. The photo-inactivation of E. coli by ZnO particles in suspension condition was better when compared to a coated glass slide method. AFM study confirmed the destruction of bacterial cell wall membrane by the photocatalytic effect. The particles morphology of photocatalyst is well dependent on antibacterial activity under sunlight.

Impact and Role of Bacterial Communities on Biocorrosion of Metals Used in the Processing Industry

In the present study, the effects of the corrosive bacterial community and the biofilm on cooling water systems made from mild steel (MS) and brass (BR) were studied under field exposure conditions using electrochemical impedance spectroscopy measurements, scanning electron microscope, and X-ray diffraction methods. Results from16S rRNA gene sequences showed that the predominant bacteria species detected in the biofilm of MS and BR metals during 360 days of exposure were Bacillus cereus EN14, Achromobacter xylosoxidans EN15, A. xylosoxidans EN16, and B. cereus EN17. The weight loss results revealed that a higher corrosion rate was observed in MS (0.7 ± 0.1 mm/y) compared with that in BR (0.17 ± 0.05 mm/y) at the end of the exposure period. This can be explained by the bacterial communities enhancing the corrosion rates by creating a local corrosive environment. Scanning electron microscope images revealed the adsorption of biofilm on the MS and BR surfaces following180 days of exposure. From the electrochemical impedance study, a higher charge transfer resistance (R _ct) was obtained for BR (119.6 Ω cm²) when compared with that of MS (43.4 Ω cm²). This study explains the role of bacterial communities and their mechanisms in the corrosion of MS and BR in cooling water systems.

Role of 2-mercaptopyridine on control of microbial influenced corrosion of copper CW024A metal in cooling water system

In this present study, the biocorrosion behaviour of Bacillus thuringiensis EN2 and B. oleronius EN9 on copper metal CW024A (Cu) in cooling water system (1% chloride) were evaluated using weight loss, electrochemical impedance spectroscopy (EIS) and surface analysis. In presence of EN2 and EN9, the corrosion rates (CR) were higher, about 0.021 mm/y and 0.032 mm/y than control system (0.004 mm/y). On the other hand, the presence of corrosion inhibitor 2-mercaptopyridine (2-MCP) with bacteria (EN2 and EN9), the biofilm on metal surface was highly inhibited and thus reduces the corrosion rate (CR: 0.004 mm/y). The electrochemical behaviour of CW024A metal was correlated with the adsorbed corrosion inhibitor film and biofilm. Atomic force microscopy (AFM) analysis revealed that the presence of EN2 and EN9 more pits was observed on the metal surface rather than 2-MCP system. EIS confirms the inhibitor act as cathodic type of inhibitor and thus leads to the inhibition of CR. Overall, this work concluded that corrosion inhibitor (2-MCP) inhibits, the bacterial biofilm formation on the metal surface due to the formation of productive layer on metal surface as coordination of NH bond. Which leads to the reduction of bacterial attachment and thus higher corrosion inhibition efficiency (75%) obtained. This is the first work disclosing the role of 2-MCP formulations as potent anti-bacterial and corrosion inhibition efficiency on copper metal in cooling water tower environment.

Role of thermophilic bacteria (Bacillus and Geobacillus) on crude oil degradation and biocorrosion in oil reservoir environment

Thermophilic bacterial communities generate thick biofilm on carbon steel API 5LX and produce extracellular metabolic products to accelerate the corrosion process in oil reservoirs. In the present study, nine thermophilic biocorrosive bacterial strains belonging to Bacillus and Geobacillus were isolated from the crude oil and produced water sample, and identified using 16S rRNA gene sequencing. The biodegradation efficiency of hydrocarbons was found to be high in the presence of bacterial isolates MN6 (82%), IR4 (94%) and IR2 (87%). During the biodegradation process, induction of the catabolic enzymes such as alkane hydroxylase, alcohol dehydrogenase and lipase were also examined in these isolates. Among them, the highest activity of alkane hydroxylase (130 µmol mg^-1 protein) in IR4, alcohol dehydrogenase (70 µmol mg^-1 protein) in IR2, and higher lipase activity in IR4 (60 µmol mg^-1 protein) was observed. Electrochemical impedance spectroscopy and X-ray diffraction data showed that these isolates oxidize iron into ferrous/ferric oxides as the corrosion products on the carbon steel surface, whilst the crude oil hydrocarbon served as a sole carbon source for bacterial growth and development in such extreme environments.

Treatment of soak liquor and bioelectricity generation in dual chamber microbial fuel cell

The discharge of untreated soak liquor from tannery industry causes severe environmental pollution. This study is characterizing the soak liquor as a substrate in the microbial fuel cell (MFC) for remediation along with electricity generation. The dual chamber MFC was constructed and operated. Potassium permanganate was used as cathode solution and carbon felt electrode as anodic and cathodic material, respectively. The soak liquor was characterized by electrochemical studies viz., cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and polarization studies, respectively. The removal percentage of protein, lipid, and chemical oxygen demand (COD) were measured before and after treatment with MFC. The results of MFC showed a highest current density of 300 mA/cm² and a power density of 92 mW/m². The removal of COD, protein, and lipid were noted as 96, 81, and 97% respectively during MFC process. This MFC can be used in tannery industries for treating soak liquor and simultaneous electricity generation.

Biocorrosion of mild steel and copper used in cooling tower water and its control

The present study describes the biocorrosion of mild steel (MS1010) and pure copper (Cu) in cooling water environments (both field and lab study). Electrochemical and surface analyses of both metals were carried out to confirm the corrosion susceptibility in the presence of bacteria and inhibitor. Surface analysis of the MS and Cu coupons revealed that biofilm was developed with increasing exposure time in the field study. In the lab study, accumulation of extracellular polymeric substance over the metal surface was noticed and led to the severe pitting type of corrosion on both metal surfaces. Besides, the anti-corrosive study was carried out using the combinations of commercial corrosion inhibitor (S7653-10 ppm) with biocide (F5100-5 ppm), and the results reveal that the corrosion rate of MS and Cu was highly reduced to 0.0281 and 0.0021 mm/year (inhibitor system) than 0.1589 and 0.0177 mm/year (control system). Inhibition efficiency for both metals in the presence of inhibitor with biocide was found as 82 and 88% for MS and Cu, respectively. The present study concluded that MS was very susceptible to biocorrosion, compared to copper metal in cooling water environment. Further, the combination of the both inhibitor and biocide was effectively inhibiting the biocorrosion which was due to its antibacterial and anti-corrosive properties.

Bioengineered silver nanoparticles as potent anti-corrosive inhibitor for mild steel in cooling towers

Silver nanoparticle-aided enhancement in the anti-corrosion potential and stability of plant extract as ecologically benign alternative for microbially induced corrosion treatment is demonstrated. Bioengineered silver nanoparticles (AgNPs) surface functionalized with plant extract material (proteinacious) was generated in vitro in a test tube by treating ionic AgNO₃ with the leaf extract of Azadirachta indica that acted as dual reducing as well as stabilizing agent. Purity and crystallinity of the AgNPs, along with physical and surface characterizations, were evaluated by performing transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive x-ray spectra, single-area electron diffractions, zeta potential, and dynamic light scattering measurements. Anti-corrosion studies against mild steel (MS1010) by corrosion-inducive bacterium, Bacillus thuringiensis EN2 isolated from cooling towers, were evaluated by performing electrochemical impedance spectroscopy (EIS), weight loss analysis, and surface analysis by infrared spectroscopy. Our studies revealed that AgNPs profoundly inhibited the biofilm on MS1010 surface and reduced the corrosion rates with the CR of 0.5 mm/y and an inhibition efficiency of 77% when compared to plant extract alone with a CR of 2.2 mm/y and an inhibition efficiency of 52%. Further surface analysis by infrared spectra revealed that AgNPs formed a protective layer of self-assembled film on the surface of MS1010. Additionally, EIS and surface analysis revealed that the AgNPs have inhibited the bacterial biofilm and reduced the pit on MS1010. This is the first report disclosing the application of bioengineered AgNP formulations as potent anti-corrosive inhibitor upon forming a protective layer over mild steel in cooling water towers. Graphical Abstract ᅟ.

Control of corrosive bacterial community by bronopol in industrial water system

ABSTRACT

Ten aerobic corrosive bacterial strains were isolated from a cooling tower water system (CWS) which were identified based on the biochemical characterization and 16S rRNA gene sequencing. Out of them, dominant corrosion-causing bacteria, namely, Bacillus thuringiensis EN2, Terribacillus aidingensis EN3, and Bacillus oleronius EN9, were selected for biocorrosion studies on mild steel 1010 (MS) in a CWS. The biocorrosion behaviour of EN2, EN3, and EN9 strains was studied using immersion test (weight loss method), electrochemical analysis, and surface analysis. To address the corrosion problems, an anti-corrosive study using a biocide, bronopol was also demonstrated. Scanning electron microscopy and Fourier-transform infrared spectroscopy analyses of the MS coupons with biofilm developed after exposure to CWS confirmed the accumulation of extracellular polymeric substances and revealed that biofilms was formed as microcolonies, which subsequently cause pitting corrosion. In contrast, the biocide system, no pitting type of corrosion, was observed and weight loss was reduced about 32 ± 2 mg over biotic system (286 ± 2 mg). FTIR results confirmed the adsorption of bronopol on the MS metal surface as protective layer (co-ordination of NH2-Fe3+) to prevent the biofilm formation and inhibit the corrosive chemical compounds and thus led to reduction of corrosion rate (10 ± 1 mm/year). Overall, the results from WL, EIS, SEM, XRD, and FTIR concluded that bronopol was identified as effective biocide and corrosion inhibitor which controls the both chemical and biocorrosion of MS in CWS.

GRAPHICAL ABSTRACT

Role of calcium-depositing bacteria Agrobacterium tumefaciens and its influence on corrosion of different engineering metals used in cooling water system

The present investigation deals with the role of calcium-depositing bacterial community on corrosion of various engineering metals, namely, brass alloy (BS), copper (Cu), stainless steel (SS) and mild steel (MS). Based on the corrosion behavior, Agrobacterium tumefaciens EN13, an aerobic bacterium is identified as calcium-depositing bacteria on engineering metals. The results of the study are supported with biochemical characterization, 16S rRNA gene sequencing, calcium quantification, weight loss, electrochemical (impedance and polarization) and surface analysis (XRD and FTIR) studies. The calcium quantification study showed carbonate precipitation in abiotic system/biotic system as 50 and 700 ppm, respectively. FTIR results too confirmed the accumulation of calcium deposits from the environment on the metal surface by EN13. Electrochemical studies too supported the corrosion mechanism by showing a significant increase in the charge transfer resistance (R_ct) of abiotic system (44, 33.6, 45, 29.6 Ω cm²) than compared to biotic system (41, 10.1 29 and 25 Ω cm²). Hence, the outcome of the present study confirmed the enhanced bioaccumulation behavior of calcium by the strain, EN13.

Ginger extract as green biocide to control microbial corrosion of mild steel

In latest years, various techniques and chemicals have been used for the control of microbial influenced corrosion (MIC) of metals. The application of botanical-based biocides is one of the effective and practical techniques in the fight against MIC. In the present study, the role of aqueous extract of ginger (Zingiber officinale) (GIE) as green biocide to control MIC of mild steel 1010 (MS) in a cooling water system was investigated. Biocorrosion behavior of Bacillus thuringiensis EN2 on MS and its control by GIE was analyzed by electrochemical measurements. Polarization, electrochemical studies (ES), weight loss measurements (WL), and surface analysis (XRD, X-ray diffraction spectroscopy, and FTIR, Fourier transform infra-red spectroscopy) were performed under various incubation periods up to 4 weeks. We observed that EN2 forms a thick biofilm on the MS metal surface at the end of the incubation period and the WL significantly increased to 993 mg at fourth week when compared to the initial immersion period (194 ± 2 mg). In contrast, with addition of GIE, WL was reduced about 41 ± 2 mg over biotic system (993 ± 2 mg). GC-MS analysis confirmed the adsorption of active component of GIE (β-turmerone) on the metal surface as a protective layer to prevent the biofilm formation and thus leads to reduction of corrosion. The optimum 20 ppm of GIE was found to be effective corrosion inhibition efficiency which was about 80%. From the results of WL, ES, XRD, FTIR, and GC-MS, GIE was identified as biocide and thus inhibits the bacterial growth on MS metal surface and it leads to control MIC. XRD showed that the GIE with EN2 resulted in less formation of corrosion products over biotic and abiotic systems. Overall, this research first shed light on the antibacterial activity of GIE inhibiting biofilm formation, thus reducing the corrosion of MS in cooling water systems.