Catchment-scale rapid transfer of livestock pharmaceuticals under Mediterranean climate

Various pharmaceuticals are essential for livestock farming, but some are highly toxic to aquatic life if they reach surface water bodies. Mediterranean Climate is characterized by dry summers followed by intense autumn storms. We studied the effect of these climatic conditions on the risk of pharmaceutical residues transfer to streams at the catchment-scale. Pharmaceutical products routinely used in the study area, as well as their application frequency and season, were identified through interviews with farmers. As a proof a concept, three veterinary pharmaceuticals (Fenbendazole (FBZ), Mebendazole (MBZ) and Ivermectin (IVM)) were chosen as model chemicals based on their relatively high usage, their specificity to represent different types of livestock (swine, sheep and cattle), and their ability to be analyzed using the same analytical method. Stream water was analyzed during low flow periods and at high frequency (up to 2 h-1) during flood events. The selected veterinary pharmaceuticals were not detected during low flow, but FBZ and MBZ reached high concentrations for short periods during floods. Due to the event-driven nature of their transfer, a significant load of veterinary pharmaceuticals can reach the river and cause temporary but significant degradation of water quality (e.g. for FBZ, the water concentration reached up to 355 times the predicted no effect concentration (PNEC)). This indicates that special care should be taken to avoid keeping freshly treated livestock on pastures that may become hydrologically connected under wet conditions. In addition, it suggests that low-frequency monitoring is not sufficient to detect those high concentration levels that exist during very short periods.

Micro-fractionation shows microbial community changes in soil particles below 20 μm

Introduction

Micro-scale analysis of microbes in soil is essential to the overall understanding of microbial organization, interactions, and ecosystem functioning. Soil fractionation according to its aggregated structure has been used to access microbial habitats. While bacterial communities have been extensively described, little is known about the fungal communities at scales relevant to microbial interactions.

Methods

We applied a gentle soil fractionation method to preserve stable aggregated structures within the range of micro-aggregates and studied fungal and bacterial communities as well as nitrogen cycling potentials in the pristine Rothamsted Park Grass soil (bulk soil) as well as in its particle size fractions (PSFs; >250 μm, 250–63 μm, 63–20 μm, 20–2 μm, <2 μm, and supernatant).

Results

Overall bacterial and fungal community structures changed in PSFs below 20 μm. The relative abundance of Basidiomycota decreased with decreasing particle size over the entire measure range, while Ascomycota showed an increase and Mucoromycota became more prominent in particles below 20 μm. Bacterial diversity was found highest in the < 2 μm fraction, but only a few taxa were washed-off during the procedure and found in supernatant samples. These taxa have been associated with exopolysaccharide production and biofilm formation (e.g., Pseudomonas, Massilia, Mucilaginibacter, Edaphobaculum, Duganella, Janthinobacterium, and Variovorax). The potential for nitrogen reduction was found elevated in bigger aggregates.

Discussion

The observed changes below 20 μm particle are in line with scales where microbes operate and interact, highlighting the potential to focus on little researched sub-fractions of micro-aggregates. The applied method shows potential for use in studies focusing on the role of microbial biofilms in soil and might also be adapted to research various other soil microbial functions. Technical advances in combination with micro-sampling methods in soil promise valuable output in soil studies when particles below 20 μm are included.

Sulfamethoxazole biodegradation and impacts on soil microbial communities in a Bolivian arid high altitude catchment

The processes controlling antibiotics fate in ecosystems are poorly understood, yet their presence can inhibit bacterial growth and induce the development of bacterial resistance. Sulfamethoxazole (SMX) is one of the most frequently detected sulfonamides in natural environments due to its low metabolism and molecular properties. This work presents pioneering results on SMX biodegradation and impact in high altitude soils (Bolivian Altiplano), allowing a better understanding of the persistence, spread and impact of this antibiotic at the global watershed scale. Our results showed significant dissipation of SMX in relation to its adsorption, hydrolysis and biotransformation. However, biodegradation appears to be lower in these mountain soils than in lowland soils as widely described in the literature. The half-life of SMX ranges from 12 to 346 days in non-sterile soils. In one soil, no biotic degradation was observed, indicating a likely high persistence. Biodegradation was related to OC content and to proximity to urban activities. Regarding the study of the impacts of SMX, the DGGE results were less sensitive than the sequencing. In general, SMX strongly changes the structure and composition of the studied soils at high altitudes, which is comparable to the observations of other authors in lowland soils. The phylum Actinobacter showed high sensitivity to SMX. In contrast, the abundance of ɣ-proteobacteria remained almost unchanged. Soil contamination with SMX did not lead to the development of the studied resistance genes (sul1 and sul2) in soils where they were absent at the beginning of the experiment. Thus, the presence of SMX resistance genes seems to be related to irrigation with wastewater carrying the studied resistance genes.

First visualisation of bacterial biofilms in 3D porous media with neutron microtomography without contrast agent

Characterising bacterial biofilm growth in porous media is important for developing reliable numerical models of biofouling in industrial biofilters. One of the promising imaging methods to do that has been a recent successful application of X-ray microtomography. However, this technique requires a contrast agent (1-chloronaphtalene, for example) to distinguish biofilm from the liquid phase, which raises concern about biofilm disruption and impaired image interpretation. To overcome these drawbacks, we tested a new approach based on neutron tomography (NT), which does not need a contrast agent, by imaging two types of porous media (polytetrafluoroethylene - PTFE - and clay beads of various diameters) in glass or PTFE tubes in which bacterial biofilms were grown for 7 days and by comparing these images with the ones obtained with X-ray microtomography. NT images showed that the biofilm formed preferentially around the beads and at bead/bead interface. Visual comparison of both imaging techniques showed consistent biofilm spatial distributions and that the contrasting agent did not significantly disrupt the biofilm. NT images, on the other hand, were still too noisy to allow quantitative measurements. Therefore, X-ray microtomography (provided it uses non-disruptive contrast agents) seems to provide more reliable microstructural descriptors.

Low mobility of CuO and TiO2 nanoparticles in agricultural soils of contrasting texture and organic matter content

The fate of nanoparticles (NPs) in soil under relevant environmental conditions is still poorly understood. In this study, the mobility of two metal-oxide nanoparticles (CuO and TiO₂) in contrasting agricultural soils was investigated in water-saturated soil columns. The transport of TiO₂ and CuO-NPs were assessed in six soils with three different textures (from sand to clay) and two contrasted organic matter (OM) contents for each texture. TiO₂ mobility was very low in all soils, regardless of texture and OM content. Mass recoveries were always less than 5%, probably in relation with the strong homo-aggregation of TiO₂-NPs observed in all soil solutions, with apparent sizes 3-6 times larger than their nominal size. This low mobility suggests that TiO₂-NPs present a low risk of direct groundwater contamination in contrasted surface soils. Although their retention was also generally high (more than 86%), CuO nanoparticles were found to be mobile in all soils. This is probably related to their smaller apparent size and low capacity of homo-aggregation of CuO-NPs in all soil solutions. No clear influence of neither soil texture or soil total organic matter content could be observed on CuO transport. However, this study shows that in contrasted agricultural soils, CuO-NPs transport is mainly controlled by the solutes dissolved in soil solution (DOC and PO₄ species), rather than by the properties of the soil solid phase.

Small-Scale Variability in Bacterial Community Structure in Different Soil Types

Microbial spatial distribution has mostly been studied at field to global scales (i.e., ecosystem scales). However, the spatial organization at small scales (i.e., centimeter to millimeter scales), which can help improve our understanding of the impacts of spatial communities structure on microbial functioning, has received comparatively little attention. Previous work has shown that small-scale spatial structure exists in soil microbial communities, but these studies have not compared soils from geographically distant locations, nor have they utilized community ecology approaches, such as the core and satellite hypothesis and/or abundance-occupancy relationships, often used in macro-ecology, to improve the description of the spatial organization of communities. In the present work, we focused on bacterial diversity (i.e., 16S rRNA gene sequencing) occurring in micro-samples from a variety of locations with different pedo-climatic histories (i.e., from semi-arid, alpine, and temperate climates) and physicochemical properties. The forms of ecological spatial relationships in bacterial communities (i.e., occupancy-frequency and abundance-occupancy) and taxa distributions (i.e., habitat generalists and specialists) were investigated. The results showed that bacterial composition differed in the four soils at the small scale. Moreover, one soil presented a satellite mode distribution, whereas the three others presented bimodal distributions. Interestingly, numerous core taxa were present in the four soils among which 8 OTUs were common to the four sites. These results confirm that analyses of the small-scale spatial distribution are necessary to understand consequent functional processes taking place in soils, affecting thus ecosystem functioning.

Variability of the Atmospheric PM10 Microbiome in Three Climatic Regions of France

Primary Biogenic Organic Aerosols (PBOA) were recently shown to be produced by only a few types of microorganisms, emitted by the surrounding vegetation in the case of a regionally homogeneous field site. This study presents the first comprehensive description of the structure and main sources of airborne microbial communities associated with temporal trends in Sugar Compounds (SC) concentrations of PM₁₀ in 3 sites under a climatic gradient in France. By combining sugar chemistry and DNA Metabarcoding approaches, we intended to identify PM₁₀-associated microbial communities and their main sources at three sampling-sites in France, under different climates, during the summer of 2018. This study accounted also for the interannual variability in summer airborne microbial community structure (bacteria and fungi only) associated with PM₁₀-SC concentrations during a 2 consecutive years’ survey at one site. Our results showed that temporal changes in PM₁₀-SC in the three sites are associated with the abundance of only a few specific taxa of airborne fungi and bacterial. These taxa differ significantly between the 3 climatic regions studied. The microbial communities structure associated with SC concentrations of PM₁₀ during a consecutive 2-year study remained stable in the rural area. Atmospheric concentration levels of PM₁₀-SC species varied significantly between the 3 study sites, but with no clear difference according to site typology (rural vs. urban), suggesting that SC emissions are related to regional rather than local climatic characteristics. The overall microbial beta diversity in PM₁₀ samples is significantly different from that of the main vegetation around the urban sites studied. This indicates that the airborne microorganisms at these urban sites are not solely from the immediate surrounding vegetation, which contrasts with observations at the scale of a regionally homogeneous rural site in 2017. These results improve our understanding of the spatial behavior of tracers of PBOA emission sources, which need to be better characterized to further implement this important mass fraction of Organic Matter (OM) in Chemical Transport models (CTM).

Characterization and comparison of groundwater quality and redox conditions in the Arakawa Lowland and Musashino Upland, southern Kanto Plain of the Tokyo Metropolitan area, Japan

Groundwater is essential for the Earth biosphere but is often contaminated by harmful chemical compounds due to both anthropogenic and natural causes. A key factor controlling the fate of harmful chemicals in groundwater is the reduction/oxidation (redox) conditions. The formation factors for the groundwater redox conditions are insufficiently understood. In this study, long-term groundwater quality beneath one of the world megacities was monitored and evaluated. We measured and compared hydrogeochemical conditions including groundwater quality (35 chemical parameters) and redox conditions of five aquifers in the Arakawa Lowland and Musashino Upland, southern Kanto Plain of the Tokyo Metropolitan area, Japan. Monitoring results suggested the following: The main origin of groundwater is precipitation in both the Lowland and Upland areas. The three aquifers in the Arakawa Lowland are likely fully separated, with one unconfined and two confined aquifers under iron reducing and methanogenic conditions, respectively. Oppositely, in the Musashino Upland, the water masses in the two aquifers are likely partly connected, under aerobic conditions, and undergoing the same groundwater recharge and flow processes under similar hydrogeological conditions. The different groundwater redox conditions observed are likely caused by the very different groundwater residence times for the Arakawa Lowland and Musashino Upland.

Distribution of AC Electric Field-Induced Transmembrane Voltage in Escherichia coli Cell Wall Layers

On the basis of Gram-negative bacterium Escherichia coli models previously published in the literature, the transmembrane voltage induced by the application of an alternating current (AC) electric field on a bacterial suspension is calculated using COMSOL Multiphysics software, in the range 1-20 MHz, for longitudinal and transverse field orientations. The voltages developed on each of the three layers of the cell wall are then calculated using an electrical equivalent circuit. This study shows that the overall voltage on the cell wall, whose order of magnitude is a few tens of µV, is mainly distributed on inner and outer layers, while a near-zero voltage is found on the periplasm, due to its much higher electrical conductivity compared with the other layers. Although the outer membrane electrical conductivity taken in the model is a thousand times higher than that of the inner membrane, the voltage there is about half of that on the inner membrane, due to capacitive effects. It follows that the expression of protein complexes anchored in the inner membrane could potentially be disrupted, inducing in particular a possible perturbation of biological processes related to cellular respiration and proton cycle, and leading to growth inhibition as a consequence. Protein complexes anchored in the outer membrane or constituting a bridge between the three layers of the cell wall, such as some porins, may also undergo the same action, which would add another growth inhibition factor, as a result of deficiency in porin filtration function when the external environment contains biocides. Bioelectromagnetics. 2020;41:279-288 © 2020 Bioelectromagnetics Society.

Assessment of the Sulfamethoxazole mobility in natural soils and of the risk of contamination of water resources at the catchment scale

Sulfamethoxazole (SMX) is one of the antibiotics most commonly detected in aquatic and terrestrial environments and is still widely used, especially in low income countries. SMX is assumed to be highly mobile in soils due to its intrinsic molecular properties. Ten soils with contrasting properties and representative of the catchment soil types and land uses were collected throughout the watershed, which undergoes very rapid urban development. SMX displacement experiments were carried out in repacked columns of the 10 soils to explore SMX reactive transfer (mobility and reactivity) in order to assess the contamination risk of water resources in the context of the Bolivian Altiplano. Relevant sorption processes were identified by modelling (HYDRUS-1D) considering different sorption concepts. SMX mobility was best simulated when considering irreversible sorption as well as instantaneous and rate-limited reversible sorption, depending on the soil type. SMX mobility appeared lower in soils located upstream of the watershed (organic and acidic soils - Regosol) in relation with a higher adsorption capacity compared to the soils located downstream (lower organic carbon content - Cambisol). By combining soil column experiments and soil profiles description, this study suggests that SMX can be classified as a moderately to highly mobile compound in the studied watershed, depending principally on soil properties such as pH and OC. Potential risks of surface and groundwater pollution by SMX were thus identified in the lower part of the studied catchment, threatening Lake Titicaca water quality.

Negative Effects of Copper Oxide Nanoparticles on Carbon and Nitrogen Cycle Microbial Activities in Contrasting Agricultural Soils and in Presence of Plants

Metal-oxide nanoparticles (NPs) such as copper oxide (CuO) NPs offer promising perspectives for the development of novel agro-chemical formulations of pesticides and fertilizers. However, their potential impact on agro-ecosystem functioning still remains to be investigated. Here, we assessed the impact of CuO-NPs (0.1, 1, and 100 mg/kg dry soil) on soil microbial activities involved in the carbon and nitrogen cycles in five contrasting agricultural soils in a microcosm experiment over 90 days. Additionally, in a pot experiment, we evaluated the influence of plant presence on the toxicity of CuO-NPs on soil microbial activities. CuO-NPs caused significant reductions of the three microbial activities measured (denitrification, nitrification, and soil respiration) at 100 mg/kg dry soil, but the low concentrations (0.1 and 1 mg/kg) had limited effects. We observed that denitrification was the most sensitive microbial activity to CuO-NPs in most soil types, while soil respiration and nitrification were mainly impacted in coarse soils with low organic matter content. Additionally, large decreases in heterotrophic microbial activities were observed in soils planted with wheat, even at 1 mg/kg for soil substrate-induced respiration, indicating that plant presence did not mitigate or compensate CuO-NP toxicity for microorganisms. These two experiments show that CuO-NPs can have detrimental effects on microbial activities in soils with contrasting physicochemical properties and previously exposed to various agricultural practices. Moreover, we observed that the negative effects of CuO-NPs increased over time, indicating that short-term studies (hours, days) may underestimate the risks posed by these contaminants in soils.

The importance of simulated lung fluid (SLF) extractions for a more relevant evaluation of the oxidative potential of particulate matter

Particulate matter (PM) induces oxidative stress in vivo, leading to adverse health effects. Oxidative potential (OP) of PM is increasingly studied as a relevant metric for health impact (instead of PM mass concentration) as much of the ambient particle mass do not contribute to PM toxicity. Several assays have been developed to quantify PM oxidative potential and a widely used one is the acellular dithiothreitol (DTT) assay. However in such assays, particles are usually extracted with methanol or Milli-Q water which is unrepresentative of physiological conditions. For this purpose, OP_DTT measurements after simulated lung fluids (SLF) extraction, in order to look at the impact of simulated lung fluid constituents, were compared to Milli-Q water extraction measurements. Our major finding is a significant decrease of the OP_DTT when the artificial lysosomal fluid (ALF) solution was used. Indeed, ligand compounds are present in the SLF solutions and some induce a decrease of the OP when compared to water extraction. Our results suggest that the effect of ligands and complexation in lining fluids towards PM contaminants probably has been underestimated and should be investigated further.

Antibiotic pollution in the Katari subcatchment of the Titicaca Lake: Major transformation products and occurrence of resistance genes

An increasing number of studies pointed out the ubiquitous presence of medical residues in surface and ground water as well as in soil compartments. Not only antibiotics can be found in the environment but also their transformation products about which little information is generally available. The development of bacterial resistance to antibiotics is particularly worrying as it can lead to sanitary and health problems. Studies about the dissemination of antibiotics and associated resistances in the Bolivian Altiplano are scarce. We provide baseline information on the occurrence of Sulfamethoxazole (SMX) and Trimethoprim (TMP) antibiotics as well as on the most common human SMX transformation products (TP) and on the occurrence of sulfonamide resistance genes. The studied water and soil compartments presented high levels of antibiotic pollution. This situation was shown to be mainly linked with uncontrolled discharges of treated and untreated wastewaters, resulting on the presence of antibiotics in the Titicaca Lake. SMX TPs were detected in surface waters and on soil sampled next to the wastewater treatment plant (WWTP). SMX resistance genes sulI and sulII were widely detected in the basin hydrological network, even in areas unpolluted with antibiotics. Mechanisms of co-selection of antibiotic- and metal- resistance may be involved in the prevalence of ARG's in pristine areas with no anthropogenic activity and free of antibiotic pollution.

Theoretical evidence of maximum intracellular currents versus frequency in an Escherichia coli cell submitted to AC voltage

In this work, the problem of intracellular currents in longilinear bacteria, such as Escherichia coli, suspended in a physiological medium and submitted to a harmonic voltage (AC), is analyzed using the Finite-Element-based software COMSOL Multiphysics. Bacterium was modeled as a cylindrical capsule, ended by semi-spheres and surrounded by a dielectric cell wall. An equivalent single-layer cell wall was defined, starting from the well-recognized three-shell modeling approach. The bacterium was considered immersed in a physiological medium, which was also taken into account in the modeling. A new complex transconductance was thus introduced, relating the complex ratio between current inside the bacterium and voltage applied between two parallel equipotential planes, separated by a realistic distance. When voltage was applied longitudinally relative to the bacterium main axis, numerical results in terms of frequency response in the 1-20 MHz range for E. coli cells revealed that transconductance magnitude exhibited a maximum at a frequency depending on the cell wall capacitance. This occurred in spite of the purely passive character of the model and could be explained by an equivalent electrical network giving very similar results and showing special conditions for lateral paths of the currents through the cell wall. It is shown that the main contribution to this behavior is due to the conductive part of the current. Bioelectromagnetics. 38:213-219, 2017. © 2016 Wiley Periodicals, Inc.

Development and evaluation of an experimental protocol for 3-D visualization and characterization of the structure of bacterial biofilms in porous media using laboratory X-ray tomography

The development of a reliable model allowing accurate predictions of biofilm growth in porous media relies on a good knowledge of the temporal evolution of biofilm structure within the porous network. Since little is known about the real 3-D structure of biofilms in porous media, this work was aimed at developing a new experimental protocol to visualize the 3-D microstructure of the inside of a porous medium using laboratory X-ray microtomography. A reliable and reproducible methodology is proposed for (1) growing a biofilm inside a porous medium, and (2) X-ray tomography-based characterization of the temporal development of the biofilm at the inlet of the biofilter. The statistical analysis proposed here also validates the results presented in the literature based on a biofilm structure single measurement.

Combined Study of Titanium Dioxide Nanoparticle Transport and Toxicity on Microbial Nitrifying Communities under Single and Repeated Exposures in Soil Columns

Soils are exposed to nanoparticles (NPs) as a result of their increasing use in many commercial products. Adverse effects of NPs on soil microorganisms have been reported in several ecotoxicological studies using microcosms. Although repeated exposures are more likely to occur in soils, most of these previous studies were performed as a single exposure to NPs. Contrary to single contamination, the study of multiple NP contaminations in soils requires the use of specialized setups. Using a soil column experiment, we compared the influence of single and repeated exposures (one, two, or three exposures that resulted in the same final concentration applied) on the transport of titanium dioxide (TiO₂) NPs through soil and the effect of these different exposure scenarios on the abundance and activity of soil nitrifying microbial communities after a 2 month incubation. The transport of TiO₂ NPs was very limited under both single and repeated exposures and was highest for the lowest concentration injected during the first application. Significant decreases in nitrification activity and ammonia-oxidizing archaea and bacteria populations were observed only for the repeated exposure scenario (three TiO₂ NP contaminations). These results suggest that, under repeated exposures, the transport of TiO₂ NPs to deep soil layers and groundwater is limited and that a chronic contamination is more harmful for the soil microbiological functioning than a single exposure.

Titanium dioxide nanoparticles strongly impact soil microbial function by affecting archaeal nitrifiers

Soils are facing new environmental stressors, such as titanium dioxide nanoparticles (TiO2-NPs). While these emerging pollutants are increasingly released into most ecosystems, including agricultural fields, their potential impacts on soil and its function remain to be investigated. Here we report the response of the microbial community of an agricultural soil exposed over 90 days to TiO2-NPs (1 and 500 mg kg-1 dry soil). To assess their impact on soil function, we focused on the nitrogen cycle and measured nitrification and denitrification enzymatic activities and by quantifying specific representative genes (amoA for ammonia-oxidizers, nirK and nirS for denitrifiers). Additionally, diversity shifts were examined in bacteria, archaea, and the ammonia-oxidizing clades of each domain. With strong negative impacts on nitrification enzyme activities and the abundances of ammonia-oxidizing microorganism, TiO2-NPs triggered cascading negative effects on denitrification enzyme activity and a deep modification of the bacterial community structure after just 90 days of exposure to even the lowest, realistic concentration of NPs. These results appeal further research to assess how these emerging pollutants modify the soil health and broader ecosystem function.

Combining microscopy with spectroscopic and chemical methods for tracing the origin of atmospheric fallouts from mining sites

Populations living close to mining sites are often exposed to important heavy metal concentrations, especially through atmospheric fallouts. Identifying the main sources of metal-rich particles remains a challenge because of the similarity of the particle signatures from the polluted sites. This work provides an original combination of physical and chemical methods to determine the main sources of airborne particles impacting inhabited zones. Raman microspectrometry (RMS), X-ray diffraction (DRX), morphology analyses by microscopy and chemical composition were assessed. Geochemical analysis allowed the identification of target and source areas; XRD and RMS analysis identified the main mineral phases in association with their metal content and speciation. The characterization of the dominant minerals was combined with particle morphology analysis to identify fallout sources. The complete description of dust morphologies permitted the successful determination of a fingerprint of each source site. The analysis of these chemical and morphological fingerprints allowed identification of the mine area as the main contributor of metal-rich particles impacting the inhabited zone. In addition to the identification of the main sources of airborne particles, this study will also permit to better define the extent of polluted zones requiring remediation or protection from eolian erosion inducing metal-rich atmospheric fallouts.

Influence of soil properties on the toxicity of TiO₂ nanoparticles on carbon mineralization and bacterial abundance

Information regarding the impact of low concentration of engineered nanoparticles on soil microbial communities is currently limited and the importance of soil characteristics is often neglected in ecological risk assessment. To evaluate the impact of TiO2 nanoparticles (NPs) on soil microbial communities (measured on bacterial abundance and carbon mineralization activity), 6 agricultural soils exhibiting contrasted textures and organic matter contents were exposed for 90 days to a low environmentally relevant concentration or to an accidental spiking of TiO2-NPs (1 and 500mgkg(-1) dry soil, respectively) in microcosms. In most soils, TiO2-NPs did not impact the activity and abundance of microbial communities, except in the silty-clay soil (high OM) where C-mineralization was significantly lowered, even with the low NPs concentration. Our results suggest that TiO2-NPs toxicity does not depend on soil texture but likely on pH and OM content. We characterized TiO2-NPs aggregation and zeta potential in soil solutions, in order to explain the difference of TiO2-NPs effects on soil C-mineralization. Zeta potential and aggregation of TiO2-NPs in the silty-clay (high OM) soil solution lead to a lower stability of TiO2-NP-aggregates than in the other soils. Further experiments would be necessary to evaluate the relationship between TiO2-NPs stability and toxicity in the soil.

Comparison of chemical washing and physical cell-disruption approaches to assess the surface adsorption and internalization of cadmium by Cupriavidus metallidurans CH34

Bacterial biosorption of heavy metals is often considered as a surface complexation process, without considering other retention compartments than cell walls. Although this approach gives a good description of the global biosorption process, it hardly permits the prediction of the fate of biosorbed metals in the environment. This study examines the subcellular distribution of cadmium (Cd) in the metal-tolerant bacterium Cupriavidus metallidurans CH34 through the comparison of an indirect chemical method (washing cells with EDTA) and a direct physical method (physical disruption of cells). The chemical washing approach presented strong experimental biases leading to the overestimation of washed amount of Cd, supposedly bound to cell membranes. On the contrary, the physical disruption approach gave reproducible and robust results of Cd subcellular distribution. Unexpectedly, these results showed that over 80% of passively biosorbed Cd is internalized in the cytoplasm. In disagreement with the common concept of surface complexation of metals onto bacteria the cell wall was poorly reactive to Cd. Our results indicate that metal sorption onto bacterial surfaces is only a first step in metal management by bacteria and open new perspectives on metal biosorption by bacteria in the environment, with implications for soil bioremediation or facilitated transport of metals by bacteria.

Speciation study in the sulfamethoxazole-copper-pH-soil system: implications for retention prediction

Sulfamethoxazole (SMX) is a persistent sulfonamide antibiotic drug used in the veterinary and human medical sectors and is widely detected in natural waters. To better understand the reactive transport of this antibiotic in soil, the speciation of the SMX-Cu(II)-H(+) system in solution and the combined sorption of these components in a natural vineyard soil were investigated by acid-base titrimetry and infrared spectroscopy. Cu(II) is considered to represent a strongly complexing trace element cation (such as Cd(2+), Zn(2+), Pb(2+), Ni(2+), etc.) in comparison to more prevalent but more weakly binding cations (such as Ca(2+) and Mg(2+)). Titrimetric studies showed that, relative to other antibiotics, such as tetracycline, SMX is a weak copper chelating agent and a weak soil sorbent at the soil pH (pH6). However, the sorption of SMX in soil increases strongly (by a factor of 6) in the presence of copper. This finding strongly supports the hypothetical formation of ternary SMX-Cu-soil complexes, especially considering that copper is dominantly sorbed in a state at pH6. The data were successfully modelled with PhreeqC assuming the existence of binary and ternary surface complexes in equilibrium with aqueous Cu, SMX and Cu-SMX complexes. It is thought that other strongly complexing cations present on the surface of reactive organic and mineral soil phases, such as Cd(II), Ni(II), Zn(II), Pb(II), Fe(II/III), Mn(II/IV) and Al(III), affect the solid/solution partitioning of SMX. This study thus suggests that surface-adsorbed cations significantly increase the sorption of SMX.

Effect of long term organic amendments and vegetation of vineyard soils on the microscale distribution and biogeochemistry of copper

In this study we evaluated the effect of the long term organic management of a vineyard-soil on the biogeochemistry of copper at the micro-aggregate scale. The model vineyard-soil (Mâcon-France) experienced a long-term field-experiment that consisted in amendments and vegetations with various materials and plants. We studied specifically the effect of Straw (S) and Conifer Compost (CC) organic amendments and Clover (Cl) and Fescue (F) vegetation on the fate of copper (fungicide) in the surface layer of this loamy soil, through a comparison with the Non Amended soil (NA). After collection the five soils were immediately physically fractionated in order to obtain 5 granulometric size-fractions. All soils and size-fractions were quantitatively characterized in terms of granulometry, chemical content and copper distribution, speciation and bioavailability to bacteria and plants. The results showed strong increases of soil-constituents aggregation for all treatments (Cl>CC>S>F>NA), in relation with the increased cementation of soil-constituents by organic matter (OM). The distribution patterns of all major elements and organic carbon were found highly variable within the soil sub-fractions and also between the 5 treatments. Due to their specific inorganic and organic composition, soil sub-fractions can thus be considered as a specific microbial habitat. Added OM accumulated preferentially in the 20-2 μm and in the >250 μm of the 5 soils. The distribution patterns of copper as well as its speciation and bioavailability to bacteria in the soil sub-fractions were shown to be strongly different among the five soils, in relation with OM distribution. Our results also suggest that Cu-bioavailability to plants is controlled by soil-rhizosphere structure. Altogether our results permitted to show that long-term organic management of a vineyard soil induced stable modifications of soil physical and chemical properties at both macro and micro-scales. These modifications affected in turn the micro-scale biogeochemistry of copper, and especially its bioavailability to bacteria and plants.

Comparison of three labeled silica nanoparticles used as tracers in transport experiments in porous media. Part I: syntheses and characterizations

The synthesis and the characterization of three kinds of labeled silica nanoparticles were performed. Three different labeling strategies were investigated: fluorescent organic molecule (FITC) embedded in silica matrix, heavy metal core (Ag(0)) and radioactive core ((110m)Ag) surrounded by a silica shell. The main properties and the suitability of each kind of labeled nanoparticle in terms of size, surface properties, stability, detection limits, and cost were determined and compared regarding its use for transport studies. Fluorescent labeling was found the most convenient and the cheapest, but the best detection limits were reached with chemical (Ag(0)) and radio-labeled ((110m)Ag) nanoparticles, which also allowed nondestructive quantifications. This work showed that the choice of labeled nanoparticles as surrogates of natural colloids or manufactured nanoparticles strongly depends on the experimental conditions, especially the concentration and amount required, the composition of the effluent, and the timescale of the experiment.

Influence of hydrodynamics on the growth kinetics of glass-adhering Pseudomonas putida cells through a parallel plate flow chamber

The objective of this work was to investigate the influence of hydrodynamics on the growth kinetics of surface-adhering Pseudomonas putida cells. The results showed in particular that under non substrate-limiting conditions, the early step of bacterial apparent growth rate is lower than those measured with suspended cells. Contrary to previously cited authors which explain this behavior to the different adhesive properties of the "daughter"-cells (which makes more probable the detachment of these daughter-cells), in our experimental conditions, that explanation does not hold and we show a clear dependence of growth kinetics with flow conditions, due to the formation of boundary layer concentration at low Reynolds number. These results revealed that using Monod law in the modeling of biofilm growth in fixed-biomass processes should be performed with care.

Size- and concentration-dependent deposition of fluorescent silica colloids in saturated sand columns: transport experiments and modeling

This study investigates the size and concentration effects on the transport of silica colloids in columns of sandy aquifer material. Colloid transport experiments were performed with specifically developed fluorescent labeled silica colloids in columns of a repacked natural porous medium under hydro-geochemical conditions representative of sandy aquifers. Breakthrough curves and vertical deposition profiles of colloids were measured for various colloid concentrations and sizes. The results showed that for a given colloid concentration injected, deposition increased when increasing the size of the colloids. For a given colloid size, retention was also shown to be highly concentration-dependent with a non-monotonous pattern presenting low and high concentration specificities. Deposition increases when increasing both size and injected concentration, until a threshold concentration is reached, above which retention decreases, thus increasing colloid mobility. Results observed above the threshold concentration agree with a classical blocking mechanism typical of a high concentration regime. Results observed at lower colloid concentrations were not modeled with a classical blocking model and a depth- and time-dependent model with a second order kinetic law was necessary to correctly fit the experimental data in the entire range of colloid concentrations with a single set of parameters for each colloidal size. The colloid deposition mechanisms occuring at low concentrations were investigated through a pore structure analysis carried out with Mercury Intrusion Porosimetry and image analysis. The determined pore size distribution permitted estimation of the maximal retention capacity of the natural sand as well as some low flow zones. Altogether, these results stress the key role of the pore space geometry of the sand in controlling silica colloids deposition under hydro-geochemical conditions typical of sandy aquifers. Our results also showed originally that colloid mobility in porous media is not only favored at high colloid concentrations, but also at very low concentrations, which are more likely to be observed in groundwater.

Role of macropore flow in the transport of Escherichia coli cells in undisturbed cores of a brown leached soil

The objective of this work was to evaluate the transport of Escherichia coli cells in undisturbed cores of a brown leached soil collected at La Côte St André (France). Two undisturbed soil cores subjected to repeated injections of bacterial cells and/or bromide tracer were used to investigate the effect of soil hydrodynamics and ionic strength on cell mobility. Under the tested experimental conditions, E. coli cells were shown to be transported at the water velocity (retardation factor close to 1) and their retention appeared almost insensitive to water flow and ionic strength variations, both factors being known to control bacterial transport in model saturated porous media. In contrast, E. coli breakthrough curves evolved significantly along with the repetition of the cell injections in each soil core, with a progressive acceleration of their transport. The evolution of E. coli cells BTCs was shown to be due to the evolution of the structure of soil hydraulic pathways caused by the repeated water infiltrations and drainage as may occur in the field. This evolution was demonstrated through mercury intrusion porosimetry (MIP) performed on soil aggregates before and after the repeated infiltrations of bacteria. MIP revealed a progressive and important reduction of the soil aggregate porosity, n, that decreased from approximately 0.5 to 0.3, along with a decrease of the soil percolating step from 27 to 2 μm. From this result a clear compaction of soil aggregates was evidenced that concerned preferentially the pores larger than 2 μm equivalent diameter, i.e. those allowing bacterial cell passage. Since no significant reduction of the global soil volume was observed at the core scale, this aggregate compaction was accompanied by macropore formation that became progressively the preferential hydraulic pathway in the soil cores, leading to transiently bi-modal bacterial BTCs. The evolution of the soil pore structure induced a modification of the main hydrodynamic processes, evolving from a matrix-dominant transfer of water and bacteria to a macropore-dominant transfer. This work points out the importance of using undisturbed natural soils to evaluate the mobility of bacteria in the field, since the evolving hydrodynamic properties of soils appeared to dominate most physicochemical factors.

Effect of pine bark and compost on the biological denitrification process of non-hazardous landfill leachate: focus on the microbiology

In an attempt to optimize the cost-efficiency of landfill leachate treatment by biological denitrification process, our study focused on finding low-cost alternatives to traditional expensive chemicals such as composted garden refuse and pine bark, which are both available in large amount in South African landfill sites. The overall objective was to assess the behaviour of the bacterial community in relation to each substrate while treating high strength landfill leachates. Denitrification processes in fixed bed reactors were simulated at laboratory scale using anaerobic batch tests with immature compost and pine bark. High strength leachate was simulated using a solution of water and nitrate at a concentration of 500 mg l(-1). Results suggest that pine bark released large amounts of phenolic compounds and hydroxylated benzene rings, which both can delay the acclimatization time and inhibit the biological denitrification (only 30% efficiency). Furthermore, presence of potential pathogens like Enterobacter and Pantoea agglomerans prevents the applicability of the pine bark in full-scale operations. On the other hand, lightly composted garden refuse (CGR) offered an adequate substrate for the formation of a biofilm necessary to complete the denitrification process (total nitrate removal observed within 7 days). CGR further contributed to a rapid establishment of an active consortium of denitrifiers including Acinetobacter, Rhizobium, Thermomonas, Rheinheimera, Phaeospirillum and Flavobacterium. Clearly the original composition, nature, carbon to nitrogen ratio (C/N) and degree of maturity and stability of the substrates play a key role in the denitrification process, impacting directly on the development of the bacterial population and, therefore, on the long-term removal efficiency.

Small-scale spatial variability of atrazine and dinoseb adsorption parameters in an alluvial soil

Soil sorption processes largely control the environmental fate of herbicides. Therefore, accuracy of sorption parameters is crucial for accurate prediction of herbicide mobility in agricultural soils. A combined experimental and statistical study was performed to investigate the small-scale spatial variability of sorption parameters for atrazine and dinoseb in soils and to establish the number of samples needed to provide a value of the distribution coefficient (K(d)) next to the mean, with a given precision. The study explored sorption properties of the two herbicides in subsurface samples collected from four pits distributed along a transect of an alluvial soil; two to four samples were taken at about 30 cm apart at each sampling location. When considering all the data, the distribution coefficients were found to be normally and log-normally distributed for atrazine and dinoseb, respectively; the CVs were relatively high (close to 50% for dinoseb and 40% for atrazine). When analyzed horizon by horizon, the data revealed distribution coefficients normally distributed for both herbicides, whatever the soil layer, with lower CVs. The K(d) values were shown to vary considerably between samples collected at very short distance (a few centimeters), suggesting that taking a single soil sample to determine sorption properties through batch experiments can lead to highly unrepresentative results and to poor sorption/mobility predictions.

Copper dynamics and impact on microbial communities in soils of variable organic status

The effect of soil organic status on copper impact was investigated by means of a microcosm study carried out on a vineyard soil that had been amended with varying types of organic matter during a previous long-term field experiment. Soil microcosms were contaminated at 250 mg Cu kg(-1) and incubated for 35 days. Copper distribution and dynamics were assessed in the solid matrix by a sequential extraction procedure and in the soil solution by measuring total and free exchangeable copper concentrations. Copper bioavailability was also measured with a whole-cell biosensor. Modifications of microbial communities were assessed by means of biomass-C measurements and characterization of genetic structure using ARISA (automated-ribosomal-intergenic-spacer-analysis). The results showed that copper distribution, speciation, and bioavailability are strongly different between organically amended and nonamended soils. Surprisingly, in solution, bioavailable copper correlated with total copper but not with free copper. Similarly the observed differential copper impact on micro-organisms suggested that organic matter controlled copper toxicity. Bacterial-ARISA modifications also correlated with the estimated metal bioavailability and corresponded to the enrichment of the Actinobacteria. Contrarily, biomass-C and fungal-ARISA measurements did not relate trivially to copper speciation and bioavailability, suggesting that the specific composition of the indigenous-soil communities controls its sensitivity to this metal.

Fingerprinting and diversity of bacterial copA genes in response to soil types, soil organic status and copper contamination

A molecular fingerprinting assay was developed to assess the diversity of copA genes, one of the genetic determinants involved in bacterial resistance to copper. Consensus primers of the copA genes were deduced from an alignment of sequences from proteobacterial strains. A PCR detection procedure was optimized for bacterial strains and allowed the description of a novel copA genetic determinant in Pseudomonas fluorescens. The copA DNA fingerprinting procedure was optimized for DNA directly extracted from soils differing in their physico-chemical characteristics and in their organic status (SOS). Particular copA genetic structures were obtained for each studied soil and a coinertia analysis with soil physico-chemical characteristics revealed the strong influence of pH, soil texture and the quality of soil organic matter. The molecular phylogeny of copA gene confirmed that specific copA genes clusters are specific for each SOS. Furthermore, this study demonstrates that this approach was sensitive to short-term responses of copA gene diversity to copper additions to soil samples, suggesting that community adaptation is preferentially controlled by the diversity of the innate copA genes rather than by the bioavailability of the metal.

Zinc sorption to three gram-negative bacteria: combined titration, modeling, and EXAFS study

The acid-base and Zn sorption properties of three bacteria, Cupriavidus metallidurans CH34, Pseudomonas putida ATCC12633, and Escherichia coli K12DH5alpha, were investigated through an original combination of extended X-ray absorption fine structure (EXAFS) spectroscopy and equilibrium titration studies. Acid-base titration curves of the three strains were fitted with a model accounting for three conceptual reactive sites: an acidic (carboxyl and/or phosphodiester), a neutral (phosphomonoester), and a basic (amine and/or hydroxyl) group. Calculated proton and Zn equilibrium constants and site densities compare with literature data. The nature of Zn binding sites was studied by EXAFS spectroscopy. Phosphoester, carboxyl, and unexpectedly sulfhydryl ligands were identified. Their proportions depended on Zn loading and bacterial strain and were consistent with the titration results. These findings were compared to the structure and site density of the major cell wall components. It appeared that the cumulated theoretical site density of these structures (<2 Zn nm(-2)) was much lower than the total site density of the investigated strains (16-56 Zn nm(-2)). These results suggest a dominant role of extracellular polymeric substances in Zn retention processes, although Zn binding to inner cell components cannot be excluded.