Preparation of MWCNT/CoMn2O4 nanocomposite for effectual degradation of picric acid via peroxymonosulfate activation

In recent years, using nanomaterials based on multi-wall carbon nanotubes (MWCNT) through the activation of peroxymonosulfate (PMS) has attracted more attention to the degradation of organic pollutants. This research presented a new route for the synthesis of MWCNT/CoMn2O4 nanocomposite for the degradation of picric acid using advanced oxidation processes (AOPs). Firstly, CoMn2O4 nanoparticles were prepared and then loaded on MWCNT using ultrasonic waves. The results of various analyzes confirmed the successful loading of nanoparticles on carbon nanotubes. As the degradation process proceeds through oxidation processes, the high electronic conductivity of MWCNT and the active sites of Mn and Co in the nanocomposite play an essential role in activating PMS to generate reactive oxygen species (ROS). An investigation of the reaction mechanism in different conditions showed that the highest speed of picric acid decomposition in the presence of nanocomposite (98%) was in 47 min. However, the scavenger test showed that HO· and SO4·- radicals are more important in the degradation process. Meanwhile, the results showed that removing picric acid using MWCNT/CoMn2O4 was more effective than CoMn2O4 alone and confirmed the interaction effect of MWCNT nanotubes with AB2O4 nanocatalyst.

Advances and challenges in the removal of organic pollutants via sulfate radical-based advanced oxidation processes by Fe-based metal-organic frameworks: A review

Organic contaminants, notorious for their complexity and resistance to degradation, are prevalent in aquatic environments, posing severe threats to ecosystems. Sulfate radical-based advanced oxidation processes (SR-AOPs), known for their stability and high effectiveness, have become a common choice for treating organic wastewater. Metal-organic framework materials (MOFs) have garnered substantial attention due to their facile chemical manipulation, unique structural configurations, and other favorable properties. Therefore, this article critically reviews recent advances in research involving the utilization of Fe-based MOFs (Fe-MOFs) and their derivatives in SR-AOPs. Specifically, it highlights the manipulation of influencing factors within the system to enhance the degradation of organic pollutants. The mechanisms and applications underlying the degradation of organic pollutants in the SR-AOPs system are also elucidated.

Degrading surface-water-based natural organic matter and mitigating haloacetonitrile formation during chlorination: Comparison of UV/persulfate and UV/hydrogen peroxide pre-treatments

Haloacetonitriles (HANs) are unregulated disinfection by-products that are more toxic than regulated species. Therefore, efficient decomposition of HAN precursors prior to disinfection is crucial for allaying the potential HAN-induced health risks. This study investigated the key roles of ultraviolet-activated persulfate (UV/PS) treatment in alleviating HAN formation. The effects of UV/PS treatment were evaluated by correlating with the characteristics of organic matter in surface water and comparing with conventional UV/H2O2 treatment. Upon irradiating raw water samples and a Suwannee River humic acid solution spiked with 10 mM PS or H2O2 with 254 nm UV light, UV/PS treatment was found to be more potent than UV/H2O2 in mitigating the HAN production and degrading organic substances; moreover, UV/PS treatment effectively decreased the dissolved organic nitrogen (DON) content. In contrast, UV/H2O2 treatment did not induce any noticeable reduction in DON level. Furthermore, both UV/PS and UV/H2O2 treatments reduced the dichloroacetonitrile (DCAN) formation potential (FP), leading to strong correlations with the degradation of aromatic and humic-acid-like compounds. Notably, UV/PS treatment efficiently decreased the FP of bromochloroacetonitrile (BCAN) and dramatically reduced that of dibromoacetonitrile (DBAN) after a sharp increase; however, UV/H2O2 treatment gradually increased the DBAN-FP. Bromide was activated by sulfate radicals during UV/PS treatment, negatively correlating with the BCAN-FP and DBAN-FP, indicating that the formation of reactive bromine species increased the DBAN-FP; however, excessive oxidation possibly led to the recovery of inorganic bromine for decreasing the BCAN-FP and DBAN-FP. Additionally, UV/PS treatment effectively suppressed toxicity owing to its high reduction rate for brominated HANs; in contrast, UV/H2O2 treatment resulted in less significant BCAN and DBAN reductions, leading to minimal net reduction in toxicity. Overall, UV/PS treatment was remarkably effective at diminishing the toxicity of brominated HANs, underscoring its potential to mitigate drinking-water-related health risks.

Comparative study of different ultrasound based hybrid oxidation approaches for treatment of real effluent from coke oven plant

The present study investigates the treatment of real coke plant effluent utilising several ultrasound-based hybrid oxidation approaches including Ultrasound (US) alone, US + catalyst, US + H2O2, US + Fenton, US + Ozone, and US + Peroxone, with main objective as maximizing the reduction of chemical oxygen demand (COD). Ultrasonic horn at power of 130 W, frequency as 20 kHz and duty cycle as 70% was applied. Study with varying catalyst (TiO2) dose from 0.5 g/L - 2 g/L revealed 1 g/L as the optimum dose resulting in 65.15% reduction in COD. A 40 ml/L dose of H2O2 was shown to be optimal, giving an 81.96% reduction in COD, based on the study of varied doses of H2O2 from 20 ml/L to 60 ml/L. US + Fenton reagent combination at optimum Fe2+/H2O2 (w/v) ratio of 1:1 resulted in a COD reduction of 85.29% whereas reduction of COD as 81.75% was obtained at the optimum flow rate of ozone as 1 LPM for US + Ozone approach. US + Peroxone demonstrated the best efficiency (90.48%) for COD reduction. To find the toxicity effects, the treated (US + peroxone) and non-treated samples were tested for the growth of bacterial cultures. It was observed that the toxicity of the treated sample increased only marginally after treatment. High-resolution liquid chromatography mass spectrometry (HR-LCMS) analysis was also performed to establish intermediate compounds. Overall, the coupling of ultrasound with oxidation processes produced better results with US + Peroxone established as best treatment approach for coke plant effluent.

One-electron oxidant-induced transformation of dissolved organic matter: Optical and antioxidation properties and molecules

Dissolved organic matter (DOM) is a major sink of radicals in advanced oxidation processes (AOPs) and the radical-induced DOM transformation influences the subsequent water treatment processes or receiving waters. In this study, we quantified and compared DOM transformation by tracking the changes of dissolved organic carbon (DOC), UVA254, and electron donating capacity (EDC) as functions of four one-electron oxidants (SO4•-, Cl2•-, Br2•-, and CO3•-) exposures as well as the changes of functional groups and molecule distribution. SO4•- had the highest DOC reduction while Cl2•- had the highest EDC reduction, which could be due to their preferential reaction pathways of decarboxylation and converting phenols to quinones, respectively. Br2•- and CO3•- induced less changes in DOC, UVA254, and EDC than SO4•- and Cl2•-. Additionally, DOM enriched with high aromatic contents tended to have higher DOC, UVA254, and EDC reductions. Decreases in hydroxyl and carboxyl groups and increases in carbonyl groups were observed in these four types of radicals treated DOM using Fourier transform infrared spectroscopy. High resolution mass spectrometry using FTICR-MS showed that one-electron oxidants preferred to attack unsaturated carbon skeletons and transformed into molecules featuring high saturation and low aromaticity. Moreover, SO4•- was inclined to decrease oxidation state of carbon and O/C of DOM due to its strong decarboxylation capacity. This study highlights the distinct DOM transformation by four one-electron oxidants and provides comprehensive insights into the reactions of one-electron oxidants with DOM.

Ultrasound for the degradation of endocrine disrupting compounds in aqueous solution: A review on mechanisms, influence of operating parameters and cost estimation

Availability of drinking water is one of the basic humanitarian goals but remains as a grand challenge that the world is facing today. Currently, water bodies are contaminated not only with conventional pollutants but also with numerous recalcitrant pollutants, such as PPCPs, endocrine disrupting compounds, etc. These emerging pollutants require special attention because of their toxicity to living organisms, bio-resistant and can sustain even after primary and secondary treatments of wastewater. Among different treatment technologies, sonolysis is found to be an innovative and promising technique for the treatment of emerging pollutants present in aqueous solution. Sonolysis is the use of ultrasound to enhance or alter chemical reactions by the formation of free radicals and shock waves which ultimately helps in degradation of pollutants. This review summarizes several studies in the sonochemical literature, including mechanisms of sonochemical process, physical and chemical effects of ultrasound, and the influence of several process variables such as ultrasound frequency, power density, temperature and pH of the medium on degradation performance for endocrine disrupting compounds. In addition, this review highlighted techno-economic perspectives focusing on the total cost required for translating the ultrasound-based processes on a large scale. Overall, the objective of this study is to exhibit a critical review of information available in the literature to encourage and promote future research on sonolysis for the degradation of Endocrine Disrupting Compounds (EDCs).

Comprehensive two-dimensional liquid chromatography with high resolution mass spectrometry to investigate the photoelectrochemical degradation of environmentally relevant pharmaceuticals and their degradation products in water

The widespread presence of organic micropollutants in the environment reflects the inability of traditional wastewater treatment plants to remove them. In this context, advanced oxidation processes (AOPs) have emerged as promising quaternary wastewater treatment technologies since they efficiently degrade recalcitrant components by generating highly reactive free radicals. Nonetheless, the chemical characterization of potentially harmful byproducts is essential to avoid the contamination of natural water bodies with hazardous substances. Given the complexity of wastewater matrices, the implementation of comprehensive analytical methodologies is required. In this work, the simultaneous photoelectrochemical degradation of seven environmentally relevant pharmaceuticals and one metabolite from the EU Watch List 2020/1161 was examined in ultrapure water and simulated wastewater, achieving excellent removal efficiencies (overall >95%) after 180 min treatment. The reactor unit was linked to an online LC sample manager, allowing for automated sampling every 15 min and near real-time process monitoring. Online comprehensive two-dimensional liquid chromatography (LC × LC) coupled with high resolution mass spectrometry (HRMS) was subsequently used to tentatively identify degradation products after photoelectrochemical degradation. Two reversed-phase liquid chromatography (RPLC) columns were used: an SB-C18 column operated with 5 mM ammonium formate at pH 5.8 (1A) and methanol (1B) as the mobile phases in the first dimension and an SB-Aq column using acidified water at pH 3.1 (2A) and acetonitrile (2B) as the mobile phases in the second dimension. This resulted in a five-fold increase in peak capacity compared to one-dimensional LC while maintaining the same total analysis time of 50 min. The LC x LC method allowed the tentative identification of 12 venlafaxine, 7 trimethoprim and 10 ciprofloxacin intermediates. Subsequent toxicity predictions suggested that some of these byproducts were potentially harmful. This study presents an effective hybrid technology for the simultaneous removal of pharmaceuticals from contaminated wastewater matrices and demonstrates how multidimensional liquid chromatography techniques can be applied to better understand the degradation mechanisms after the treatment of micropollutants with AOPs.

Highly efficient activation of periodate by a manganese-modified biochar to rapidly degrade methylene blue

In this study, the manganese oxide/biochar composites (Mn@BC) were synthesized from Phytolacca acinosa Roxb. The Mn@BC was analyzed via techniques of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction analysis (XRD). The results show that MnOx is successfully loaded on the surface of BC, and the load of MnOx can increase the number of surface functional groups of BC. X-ray photoelectron spectroscopy (XPS) shows that MnOx loaded on BC mainly exists in three valence forms: Mn(Ⅱ), Mn(Ⅲ), and Mn(Ⅳ). The ability of Mn@BC to activate periodate (PI) was studied by simulating the degradation of methylene blue (MB) dye. The degradation experiment results showed that the MB removal rate by the Mn@BC/PI system reached 97.4% within 30 min. The quenching experiment and electron paramagnetic resonance (EPR) analysis confirmed that Mn@BC can activate PI to produce iodate (IO3•), singlet oxygen (1O2), and hydroxyl radical (•OH), which can degrade MB during the reaction. Response surface methodology (RSM) based on Box-Behnken Design (BBD) was used to determine the interaction between pH, Mn@BC and PI concentration in the Mn@BC/PI system, and the optimum technological parameters were determined. When pH = 5.4, Mn@BC concentration 0.56 mg/L, PI concentration 1.1 mmol/L, MB removal rate can reach 98.05%. The cyclic experiments show that Mn@BC can be reused. After four consecutive runs, the removal rate of MB by the Mn@BC/PI system is still 82%, and the Mn@BC/PI system also shows high performance in treating MB in actual water bodies and degrading other pollutants. This study provides a practical method for degrading dyes in natural sewage.

Effects of wavelength on the treatment of contaminants of emerging concern by UV-assisted homogeneous advanced oxidation/reduction processes

Pollutants of emerging concern in aqueous environments present a significant threat to both the aquatic ecosystem and human health due to their rapid transfer. Among the various treatment approaches to remove those pollutants, UV-assisted advanced oxidation/reduction processes are considered competent and cost-effective. The treatment effectiveness is highly dependent on the wavelength of the UV irradiation used. This article systematically discusses the wavelength dependency of direct photolysis, UV/peroxides, UV/chlor(am)ine, UV/ClO2, UV/natural organic matter, UV/nitrate, and UV/sulfite on the transformation of contaminants. Altering wavelengths affects the photolysis of target pollutants, photo-decay of the oxidant/reductant, and quantum yields of reactive species generated in the processes, which significantly impact the degradation rates and formation of disinfection byproducts. In general, the degradation of contaminants is most efficient when using wavelengths that closely match the highest molar absorption coefficients of the target pollutants or the oxidizing/reducing agents, and the contribution of pollutant absorption is generally more significant. By matching the wavelength with the peak absorbance of target compounds and oxidants/reductants, researchers and engineers have the potential to optimize the UV wavelengths used in UV-AO/RPs to effectively remove pollutants and control the formation of disinfection byproducts.

Novel photoelectrochemical 3D-system for water disinfection by deposition of modified carbon nitride on vitreous carbon foam

Graphitic carbon nitride (GCN) is an optical semiconductor with excellent photoactivity under visible light irradiation. It has been widely applied for organic micropollutant removal from contaminated water, and less investigated for microorganisms' inactivation. The photocatalytic degradation mechanism using GCN is attributed to a series of reactions with reactive oxygen species and photogenerated holes that can be boosted by modifying its physical-chemical structure. This work reports a successful improvement of the overall photocatalytic and electrocatalytic activities of the pristine material by thermal and chemical modification by a copolymerisation synthesis method. The copolymerisation of dicyandiamide as a precursor with barbituric acid strongly reduced photoluminescence due to the enhanced charge separation thus improving the catalyst efficiency under visible light irradiation. The material with 1.6 wt% of barbituric acid showed the best photocatalytic performance and electrochemical properties. This photocatalyst was selected for immobilisation on a conductive carbon foam, which promotes a higher electrochemical active surface area and enhanced mass transfer. This three-dimensional metal-free electrode was employed for the photoelectrochemical inactivation of two different microorganisms, Escherichia coli, and Enterococcus faecalis, obtaining removals below the detection limit after 30 min in simulated faecal-contaminated waters. This photoelectrochemical reactor was also applied to treat polluted river and urban waste waters, and the faecal contamination indicators were vastly reduced to values below the detection limit in 60 min in both cases, showing the wide applicability of this innovative photoelectrode for different types of polluted aqueous matrices.

Multi-pathway on peroxymonosulfate activation by single cobalt atoms incorporated on CuO with enriched oxygen vacancies for high-efficient oxidation of tetracycline

The development of single atom catalysts (SACs) with superior catalytic performance is a long-term goal for peroxymonosulfate (PMS) activation in advanced oxidation processes (AOPs). A novel SACs that single Co atoms anchored on CuO with enriched oxygen vacancies (Ov) is synthesized successfully by choosing a metal oxide as the carrier creatively. 100% of tetracycline (TC) can be removed by Co-CuO (Ov)/PMS system within 3 min. The corresponding reaction rate constant is 3.1068 min-1, which is much higher than that of CuO (Ov), ZIF-CoN4-C, Co-CuO (without Ov) and CoNP-CuO (Ov), respectively. Co(II) is the primary source of radical pathway (·OH and SO4·-), and its regeneration is promoted by Cu(Ⅰ). The enriched Ov is the major contribution to the nonradical pathway, which promotes the singlet oxygen (1O2) generation together with accelerates the electron transfer from TC to catalyst-PMS*. Besides, the Co-CuO (Ov) exhibits an excellent stability and anti-interference capability. This study highlights a novel strategy to promote PMS activation by incorporating the single metal atoms on a metal oxide carrier with defects to accelerate the redox of dominate metal and stabilize the metal atoms simultaneously, which may inform the design for the next generation of SACs in AOPs.

Degradation of formaldehyde by photo-Fenton process over n-ZVI/TiO2 catalyst

The degradation of formaldehyde in a photo-Fenton reaction was studied using n-ZVI/TiO2 as the catalyst. The effects of %n-ZVI loading, catalyst dosage, H2O2, and pH on formaldehyde degradation were studied. The n-ZVI/TiO2 catalysts were prepared by impregnation with chemical reduction, and their catalytic activity was evaluated in a batch reactor under UVC light. Transmission electron microscopy (TEM) was used to determine that the n-ZVI nanoparticle size was 39.41 nm. X-ray photoelectron spectroscopy (XPS) was used to study the oxidation states of 2%n‑ZVI/TiO2, and the Fe 2p spectrum of 2%n-ZVI/TiO2 indicated the presence of Fe0. The optimal conditions for the complete removal of formaldehyde within 30 min were an n-ZVI loading of 2 wt.%, a catalyst dosage of 0.5 g/L, 30 mM H2O2, and an initial pH of 3. After the reaction, the C-H functional group of formaldehyde was not observed due to the •OH radicals generated by Fe0 and H2O2 attacking the formaldehyde molecule. Moreover, no Fe leaching was observed, presenting an advantage compared with homogeneous Fe catalysts. Therefore, 2%n‑ZVI/TiO2 shows excellent potential as a photo-Fenton catalyst for the environmentally friendly degradation of formaldehyde.

MgxCu-biochar activated peroxydisulfate triggers reductive species for the reduction and enhanced electron-transfer degradation of electron-deficient aromatic pollutants

In wastewater treatment by persulfate-based advanced oxidation processes (PS-AOPs), electron-deficient aromatic pollutants (EDAPs) are refractory to nonradical pathway. To explore an efficient degradation pathway for EDAPs, Mg_xCu-biochar (BC) (x = 0.5, 1, 1.5) activated peroxydisulfate (PDS) was developed, which could trigger reductive species (•H) to reduce EDAPs first, and subsequently facilitate electron-transfer degradation of reduced intermediates. The roles of Mg-doping in Mg_xCu-BC to promote PDS activation and 2,4-dibromophenol (DBP) degradation were investigated. The mechanisms were then explored via electron paramagnetic resonance (EPR), chemical probes and Density Functional Theory (DFT) calculations. The results showed that Mg-doping improved metal-support interactions (MSIs) of Mg_xCu-BC, inducing •H formation via electron transfer from Cu atoms during PDS activation, which was thermodynamically favorable. The degradation rate of DBP (k_obs, 0.0494 min^-1) and Br^- release (5.35 mg L^-1) in Mg₁Cu-BC systems were more 31 and 33 times than that in Cu-BC/PDS system, respectively. The degradation mechanism of •H-enhanced electron transfer processes was that •H attacked one Br group of DBP, and then debrominated intermediates were mineralized by electron transfer processes in the Mg₁Cu-BC/PDS system. Overall, this study reports a novel pathway in PS-AOPs for selective degradation of EDAPs in wastewaters.

Efficient degradation of micropollutants in CoCaAl-LDO/peracetic acid (PAA) system: An organic radical dominant degradation process

As a novel strategy, peracetic acid (PAA) based advanced oxidation processes (AOPs) are being used in micropollutant elimination due to their high oxidation and low toxicity. In this study, Co₂Ca₁Al₁-LDO as a kind of layered double oxides (LDOs) was successfully synthesized, and it is the first time to apply Co₂Ca₁Al₁-LDO for activating PAA. The Co₂Ca₁Al₁-LDO/PAA system showed excellent removal efficiencies for various micropollutants with removal ratios ranging from 90.4% to 100% and k values from 0.087 min^-1 to 0.298 min^-1. In the degradation period, various reactive oxygen species (ROS) are involved in the system, while organic radicals (R-O^•) with a high concentration of 5.52 × 10^-13 M are the dominant ROS in the contaminants degradation process. Compared to other ROS, R-O^• had the largest contribution ratio (more than 85%) to pollutant degradation. Further analysis demonstrated that C1, C2, C3, C4, C5, C6 and N11 concentrated on the aniline group of SMX are the main attack sites based on the density functional theory (DFT) results, which is consistent with the degradation products. The toxicity of contaminants was obviously reduced after removing in this system. Furthermore, Co₂Ca₁Al₁-LDO showed good reusability and stability, and Co₂Ca₁Al₁-LDO/PAA system had excellent removal ability in actual water bodies containing inorganic anions, showing good application potential. Importantly, this study explored the feasibility of applying LDO catalysts in PAA-based AOPs for micropollutants elimination, providing new insights for subsequent research.

Selective and effective oxidation of ammonium to dinitrogen in MgO/Na2SO3/K2S2O8 system

The oxidation of ammonium (NH₄⁺) to dinitrogen (N₂) with high selectivity and high efficiency is still a challenge. Herein, a novel sunlight induced persulfate (PS)-based AOPs process (MgO/Na₂SO₃/PS/hv) was proposed by introducing solid base (MgO) and hydrated electron (e_aq^-), to selectively oxidize NH₄⁺ to N₂, with high selectivity and high efficiency at a wide range of pH value. The deprotonation of NH₄⁺ into NH₃ by MgO and the generation of •OH and SO₄^-• by PS activation were responsible for the high efficiency of NH₄⁺ oxidation. The buffering capacity provided by MgO to proton released from PS activation made the NH₄⁺ oxidation possible at a wide pH range. The e_aq^- from the Na₂SO₃/hv process was the main active specie to reduce NO₂^-and NO₃^- (NO_x^-) into N₂, responsible for high N₂ selectivity of NH₄⁺ oxidation. 100% NH₄⁺ could be oxidized within 30 min, and N₂ selectivity exceeded 96% at the initial pH range of 3-11 and the initial concentration of NH₄⁺ of 30 mg N/L. This work could offer an efficient AOPs process for selective NH₄⁺ oxidation, which is promising for the chemical denitrification of wastewater ….

Titania/reduced graphene oxide nanocomposites (TiO2/rGO) as an efficient photocatalyst for the effective degradation of brilliant green in aqueous media: effect of peroxymonosulfate and operational parameters

This study is focused on synthesis of highly efficient Titania/reduced Graphene Oxide (TiO₂/rGO) nanocomposites by means of simple hydrothermal technique. The TiO₂/rGO were synthesized in different ratios of 0.5, 1.0, 2.0, and 3% by varying the concentration of rGO while the concentration of TiO₂ was kept constant and the obtained samples were designated as TrG0.5, TrG1, TrG2, and TrG3 respectively. Different characterization techniques (SEM, TEM, HRTEM, XRD, EDX, TGA, UV-DRS, PL, EIS, and BET) showed high crystallinity, small crystallite size (18.4 nm), high thermal stability, high purity, low band gap energy (E_g = 3.12 eV), and high surface area (65.989 m²/g) for the as-synthesized TiO₂/rGO nanocomposite. The efficiencies of TiO₂/rGO were determined in terms of brilliant green (BG) dye degradation in aqueous media under UV light. The results revealed that 2% TiO₂/rGO (TrG2) showed high efficiency for BG degradation with the k_app of 0.023 min^-1 compared to TiO₂ alone (k_app of 0.006 min^-1). The rate of BG degradation was further synergised by the addition of peroxymonosulfate (PMS) to the system. The degradation of BG was improved to 99.4% by the incorporation of PMS in aqueous media compared to TrG2 alone. Furthermore, the degradation of BG was also examined in various media (neutral, acidic, and basic). The results revealed that by increasing pH of the medium from 3.85 to 8.2 the degradation of BG was enhanced from 99.4 to 99.9% with the corresponding k_app of 0.0602 min^-1. Moreover, the photocatalytic degradation of BG followed the pseudo-first-order kinetics. Radical scavenging experiments showed that ^●OH and SO₄^●- were the main species responsible for the degradation of BG under UV light. Besides, for determining the efficiency of as-synthesized TrG2/PMS system, the degradation of BG was also performed in various water types (distilled water, tape water, synthetic wastewater, and industrial wastewater). The degradation products (DPs) of BG and their corresponding pathways were proposed, accordingly.

Recent advances in advanced oxidation processes (AOPs) for the treatment of nitro- and alkyl-phenolic compounds

The presence of phenolic compounds in the aquatic environment has posed severe risks due to their toxicity. Among the phenolic families, nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the United States Environmental Protection Agency (US EPA). Therefore, efficient treatment methods for wastewater containing nitro- and alkyl-phenolic compounds are urgently needed. Due to the advantages of creating reactive species and generating efficient degradation of hazardous contaminants in wastewater, advanced oxidation processes (AOPs) are well-known in the field of treating toxic contaminants. In this review paper, the recent directions in AOPs, catalysts, mechanisms, and kinetics of AOPs are comprehensively reviewed. Furthermore, the conclusion summarizes the research findings, future prospects, and opportunities for this study. The main direction of AOPs lies on the optimization of catalyst and operating parameters, with industrial applications remain as the main challenge. This review article is expected to present a summary and in-depth understanding of AOPs development; and thus, inspiring scientists to accelerate the evolution of AOPs in industrial applications.

Engineering active heterojunction architecture with oxygenated-Co, Mo bimetallic sulfide heteronanosheet and graphene oxide for peroxymonosulfate activation

Bimetallic sulfides have distinctive catalytic property in activating peroxymonosulfate (PMS) for water remediation. Polyoxometalates as potential precursors have rarely been reported for the catalytic degradation of refractory organic pollutants. Herein, a composite catalyst of Co-Mo bimetallic sulfides supported onto graphene oxide (O-CoMoS/GO) with a heterojunction architecture was synthesized through a hydrothermal strategy with polyoxometalates ((NH₄)₄[Co^IIMo₆O₂₄H₆]·6H₂O) as the precursor and applied in the PMS activation. This material showed a superior performance for the catalytic degradation of the model organic pollutant, 4-chlorophenol (rapidly removed within 10 min with an apparent reaction rate constant of 0.5458 min^-1). O-CoMoS/GO outperformed most of the reported catalysts in terms of activity and had a strong tolerance towards common organic and inorganic compounds in water, and could perform well in different real water systems. Experimental and theoretical results indicated that the introduction of GO could achieve the enrichment of electrons on the metals and reduce the d band center (ε_d) of Co close to the Fermi level (ε_F), thereby facilitating the interfacial electron transfer process. The activation mechanism was due to the as-prepared bimetallic sulfides and the formation of heterojunction structure with GO, where Co(II) as the active center could be regenerated by the adjacent Mo element (as co-catalyst) and by gathering electrons from GO through the Co/Mo-O-C coupling. This work provides insights into the design of bimetallic sulfide catalysts in activating PMS for water remediation.

Challenges and Future Roadmaps in Heterogeneous Electro-Fenton Process for Wastewater Treatment

The efficiency of heterogeneous electro-Fenton technology on the degradation of recalcitrant organic pollutants in wastewater is glaringly obvious. This green technology can be effectively harnessed for addressing ever-increasing water-related challenges. Due to its outstanding performance, eco-friendliness, easy automation, and operability over a wide range of pH, it has garnered significant attention from different wastewater treatment research communities. This review paper briefly discusses the principal mechanism of the electro-Fenton process, the crucial properties of a highly efficient heterogeneous catalyst, the heterogeneous electro-Fenton system enabled with Fe-functionalized cathodic materials, and its essential operating parameters. Moreover, the authors comprehensively explored the major challenges that prevent the commercialization of the electro-Fenton process and propose future research pathways to countervail those disconcerting challenges. Synthesizing heterogeneous catalysts by application of advanced materials for maximizing their reusability and stability, the full realization of H₂O₂ activation mechanism, conduction of life-cycle assessment to explore environmental footprints and potential adverse effects of side-products, scale-up from lab-scale to industrial scale, and better reactor design, fabrication of electrodes with state-of-the-art technologies, using the electro-Fenton process for treatment of biological contaminants, application of different effective cells in the electro-Fenton process, hybridization of the electro-Fenton with other wastewater treatments technologies and full-scale analysis of economic costs are key recommendations which deserve considerable scholarly attention. Finally, it concludes that by implementing all the abovementioned gaps, the commercialization of electro-Fenton technology would be a realistic goal.

Removal of drug dexamethasone from aqueous matrices using low frequency ultrasound: Kinetics, transformation products, and effect of microplastics

Sonochemical oxidation was employed for the degradation of the drug dexamethasone (Dex). The oxidation at 20 kHz followed pseudo-first-order kinetics and increased with applied ultrasound power density. Acoustic cavitation at 71 W/L was able to eliminate 500 μg/L of dexamethasone from ultrapure water at inherent pH in less than 60 min. The oxidation was enhanced at pH 3 and decreased at increased Dex concentration. Scavenging experiments with tert-butanol showed that hydroxyl radicals play a crucial role in decomposition, where the reaction mainly occurs on the gas-liquid interface of the formed cavities. The addition of chloride did not affect Dex removal, while in the presence of 10 mg/L of humic acid or bicarbonate, the apparent kinetic constant decreased from 0.0423 ± 0.004 min^-1 to about 0.03 ± 0.002 min^-1. The rate in secondary effluent was 3.3 times lower than in ultrapure water due to the complexity of the actual matrix. Six transformation products were identified via high resolution LC-MS during the sonochemical oxidation of 3 mg/L Dex in ultrapure water. The presence of polyethylene or polystyrene microplastics slightly enhanced DEX sonodegradation. The effect of ultrasound irradiation at 71 W/L for 60 min on the microplastics surfaces was inconsiderable.

Dye mineralization under UV/H2O2 promoted by chloride ion at high concentration and the generation of chlorinated byproducts

Chloride ion (Cl^-) may promote or inhibit the oxidation of specific organic compounds treated by hydroxyl radical based advanced oxidation processes (HR-AOPs) depending on the reactivity of chlorine radicals towards the organics. However, the effects of high contents of Cl^- on the removal of total organic compounds (TOC) in high salinity organic wastewater treated by HR-AOPs were unclear. The removal and mineralization of azo dye Orange II (OrgII) by UV/H₂O₂ process with Cl^- at high contents under various pH conditions were investigated. As the pH conditions increased higher than pH 5, TOC removal rates increased slightly possibly related to the increase of O₂^- production and the reduce of futile decomposition of H₂O₂ into O₂. Cl^- at relative high concentration (1000 and 2000 mM) significantly promoted the mineralization of dyes with TOC removal increasing by 10 %-40 % under both acid and alkaline conditions. The proposed mechanism is that the reaction of Cl^- with OH would decline the decomposition of H₂O₂ into O₂ by inhibiting the reaction between OH and H₂O₂, and the generated chlorine species (Cl and Cl₂^-) could further promote the oxidation of dye molecules into intermediates and be helpful for the subsequent mineralization process. In addition, H₂O₂ and Cl^- can slowly react to give HClO and ClO^-, which may partly contribute to the decolorization and mineralization of OrgII. Meanwhile, an appropriate relative proportion between Cl₂^- and OH depending on Cl^- contents and pH conditions is important to enhance the TOC removal. However, the formation of various chlorinated byproducts especially under alkaline condition may increase the risk of environmental pollution accidents. The results demonstrate the promotion of TOC removal by UV/H₂O₂ under certain high contents of Cl^- and provide new insight into the application of HR-AOPs to the pretreatment of high salinity organic wastewater.

Recent advances in biopolymer-based advanced oxidation processes for dye removal applications: A review

Over the past few years, synthetic dye-contaminated wastewater has attracted considerable global attention due to the low biodegradability and the ability of organic dyes to persist and remain toxic, causing numerous health and environmental concerns. As a result of the recalcitrant nature of those complex organic dyes, the remediation of wastewater using conventional wastewater treatment techniques is becoming increasingly challenging. In recent years, advanced oxidation processes (AOPs) have emerged as a potential alternative to treat organic dyestuffs discharged from industries. The most widely employed AOPs include photocatalysis, ozonation, Fenton oxidation, electrochemical oxidation, catalytic heterogeneous oxidation, and ultrasound irradiation. These processes involve the generation of highly reactive radicals to oxidize organic dyes into innocuous minerals. However, many conventional AOPs suffer from several setbacks, including the high cost, high consumption of reagents and substrates, self-agglomeration of catalysts, limited reusability, and the requirement of light, ultrasound, or electricity. Therefore, there has been significant interest in improving the performance of conventional AOPs using biopolymers and heterogeneous catalysts such as metal oxide nanoparticles (MONPs). Biopolymers have been widely considered in developing green, sustainable, eco-friendly, and low-cost AOP-based dye removal technologies. They inherit intriguing properties like biodegradability, renewability, nontoxicity, relative abundance, and sorption. In addition, the immobilization of catalysts on biopolymer supports has been proven to possess excellent catalytic activity and turnover numbers. The current review provides comprehensive coverage of different AOPs and how efficiently biopolymers, including cellulose, chitin, chitosan, alginate, gelatin, guar gum, keratin, silk fibroin, zein, albumin, lignin, and starch, have been integrated with heterogeneous AOPs in dye removal applications. This review also discusses the general degradation mechanisms of AOPs, applications of biopolymers in AOPs and the roles of biopolymers in AOPs-based dye removal processes. Furthermore, key challenges and future perspectives of biopolymer-based AOPs have also been highlighted.

Utilization of methylene blue-adsorbed halloysite after carbonization to activate peroxymonosulfate degrading phenol: Performance and mechanism

In this study, a new low-cost carbon-based material was prepared via the carbonization of methylene blue adsorbed halloysite (CMH) at different temperatures in a nitrogen atmosphere, which was named CMH-T (T-Temperature). The performance of CMH-T was explored and the effects of initial pH values, catalyst dosage, phenol (PE) concentrations, peroxymonosulfate (PMS) concentrations, and water background compounds on PE degradation were investigated systematically. The results indicated that CMH800 exhibited the best performance to activate PMS for degrading PE. Specifically, 92% PE was degraded within 30 min with a constant rate (k_obs) of 0.1186 min^-1 in the CMH800/PMS system. Furthermore, CMH800 was efficient over a wide pH range (pH 3-9) and showed a slight inhibition to inorganic anions. Quenching experiments, electron spin resonance (ESR) analysis, and electrochemical analysis confirmed that PE was degraded through non-radical pathways dominated by single oxygen (¹O₂) and mediated electron transfer processes in the CMH800/PMS system. In addition, the predicted toxicity of intermediates through ECOSAR software based on QSAR (Quantitative Structure - Activity Relationship) model indicated that most of the intermediates had a low risk to water environment. Therefore, the CMH800 has a good potential for wastewater treatment applications.

Mechanisms and influencing factors for electron transfer complex in metal-biochar nanocomposites activated peroxydisulfate

The mechanisms and influencing factors for electron transfer complex need to be further studied by comparing radical and nonradical pathways. Herein, metal-biochar (BC) nanocomposites including CuO/BC, Fe₃O₄/BC and ZnO/BC were prepared to activate peroxydisulfate (PDS) for bisphenol A (BPA) degradation. The existence of electron transfer complex in CuO/BC-PDS system were directly demonstrated. Whereas radical pathway was dominant in Fe₃O₄/BC- and ZnO/BC-PDS systems for BPA degradation. There was a relationship between PDS adsorption and catalytic reaction. The rate-limiting step for BPA degradation in nonradical pathway was PDS adsorption, but in radical pathway was BPA degradation. Interestingly, among metal-BC, CuO/BC had the most effective performance in transformation of adsorbed PDS to electron transfer complex via out-sphere complexation. After pretreatment by PDS solutions, the separated CuO/BC achieved an efficiency of 60% in ensuing BPA degradation without re-addition of PDS. In addition, the activity of electron transfer complex in BPA degradation (k_obs > 0.0480 min^-1) was not affected by water matrix (e.g., Cl^-, HCO₃^-, natural organic matter (NOM) and actual water bodies), but affected by solution property (i.e., dissolved oxygen and conductivity) and oxidant species. Moreover, in BPA degradation process, nonradical pathway exhibited lower ecotoxicity instead of radical pathway.

Degradation of tetracycline antibiotic utilizing light driven-activated oxone in the presence of g-C3N4/ZnFe LDH binary heterojunction nanocomposite

In the present study, a binary heterojunction nanocomposite composed of graphitic carbon nitride (g-C₃N₄) and Zn/Fe-contained layered double hydroxide (ZnFe LDH) was employed as heterogeneous catalyst for the decomposition of tetracycline (TC) antibiotic utilizing Oxone and UV light irradiation. The sole use of g-C₃N₄/ZnFe LDH as adsorbent led to the negligible elimination of TC. In addition, the sole use of Oxone or UV (photolysis) and even their combination were not effective enough to degrade the target pollutant, while the combined process of g-C₃N₄/ZnFe LDH/Oxone/photolysis revealed significantly enhanced (synergistic) degradation of TC (92.4% within 30 min). Indirect detection tests for the identification of free radical species indicated the major role of both hydroxyl (^•OH) and sulfate (SO₄^•-) radicals in the degradation of TC by the g-C₃N₄/ZnFe LDH/Oxone/photolysis system. The elimination of TC followed a pseudo-first order kinetic model. The complete degradation of TC (degradation efficiency of 100%) was achieved within the reaction time of 25 min when ultrasound (US) was applied as enhancing agent. Furthermore, the results of total organic carbon (TOC) analysis were used to exhibit progress in the mineralization of the pollutant. The bioassay results indicated the decreased toxicity of the process effluent toward microbial population of Escherichia coli after the treatment.

A facial strategy to efficiently improve catalytic performance of CoFe2O4 to peroxymonosulfate

Cobalt iron spinel (CoFe₂O₄) has been considered as a good heterogeneous catalysis to peroxymonosulfate (PMS) in the degradation of persistent organic pollutants due to its magnetic properties and good chemical stability. However, its catalytic activity needs to be further improved. Here, a facial strategy, "in-situ substitution", was adopted to modify CoFe₂O₄ to improve its catalytic performance just by suitably increasing the Co/Fe ratio in synthesis process. Compared with CoFe₂O₄, the newly synthesized Co_1.5Fe_1.5O₄, could not only significantly improve the degradation efficiency of phenol, from 50.69 to 93.6%, but also exhibited more effective mineralization ability and higher PMS utilization. The activation energy advantage for phenol degradation using Co_1.5Fe_1.5O₄ was only 44.2 kJ/mol, much lower than that with CoFe₂O₄ (127.3 kJ/mol). A series of related representations of CoFe₂O₄ and Co_1.5Fe_1.5O₄ were compared to explore the possible reasons for the outstanding catalytic activity of Co_1.5Fe_1.5O₄. Results showed that Co_1.5Fe_1.5O₄ as well represented spinel crystal as CoFe₂O₄ and the excess cobalt just partially replaced the position of iron without changing the original structure. Co_1.5Fe_1.5O₄ had smaller particle size (8.7 nm), larger specific surface area (126.3 m²/g), which was more favorable for exposure of active sites. Apart from the superior physical properties, more importantly, more reactive centers Co (Ⅱ) and surface hydroxyl compounds generated on Co_1.5Fe_1.5O₄, which might be the major reason. Furthermore, Co_1.5Fe_1.5O₄ behaved good paramagnetism, wide range of pH suitability and strong resistance to salt interference, making it a new prospect in environmental application.

Kinetic study on degradation of micro-organics by different UV-based advanced oxidation processes in EfOM matrix

Effluent organic matter (EfOM) contains a large number of substances that are harmful to both the environment and human health. To avoid the negative effects of organic matter in EfOM, advanced treatment of organic matter is an urgent task. Four typical oxidants (H₂O₂, PS, PMS, NaClO) and UV-combined treatments were used to treat micro-contaminants in the presence or absence of EfOM, because the active radical species produced in these UV-AOPs are highly reactive with organic contaminants. However, the removal efficiency of trace contaminants was greatly affected by the presence of EfOM. The degradation kinetics of two representative micro-contaminants (benzoic acid (BA) and para chlorobenzoic acid (pCBA)) was significantly reduced in the presence of EfOM, compared to the degradation kinetics in its absence. Using the method of competitive kinetics, with BA, pCBA, and 1,4-dimethoxybenzene (DMOB) as probes, the radicals (HO^·, SO₄^-·, ClO^·) proved to be the key to reaction species in advanced oxidation processes. UV irradiation on EfOM was not primarily responsible for the degradation of micro-contaminants. The second-order rate constants of the EfOM with radicals were determined to be (5.027 ± 0.643) × 10² (SO₄^-·), (3.192 ± 0.153) × 10⁴ (HO^·), and 1.35 × 10⁶ (ClO^·) (mg C/L)^-1 s^-1. In addition, this study evaluated the production of three radicals based on the concept of R_ct, which can better analyze its reaction mechanism.

Highly efficient activation of peracetic acid by nano-CuO for carbamazepine degradation in wastewater: The significant role of H2O2 and evidence of acetylperoxy radical contribution

Peracetic acid (PAA)-based advanced oxidation processes (AOPs) has attracted increasing attentions towards contaminant degradation in the wastewater treatment. Herein, we report the efficient activation of PAA by nano-CuO (nCuO/PAA) to degrade carbamazepine (CBZ) for the first time. Rapid degradation of CBZ was observed in the nCuO/PAA system at neutral initial pH. A new scavenging experiment with Mn²⁺ as a specific scavenger was developed to distinguish the dominant role of CH₃C(O)OO^● for CBZ degradation in the nCuO/PAA process. The oxidation of CBZ by CH₃C(O)OO^● was verified to proceed via the electrons transfer, and the acute and chronic toxicity of the transformation products was significantly reduced. The efficient activation of PAA by nCuO was found to be realized through continuous conversion of Cu(II) to Cu(I), which was significantly boosted by co-existing H₂O₂. The nCuO/PAA process was slightly affected by the water matrices, and maintained high efficiency in real water samples. The findings obtained in this study provide new insights into the catalytic formation of CH₃C(O)OO^● from PAA and facilitate the development and application of PAA-based AOPs in wastewater treatment.

Periodate activated by manganese oxide/biochar composites for antibiotic degradation in aqueous system: Combined effects of active manganese species and biochar

Developing efficient catalysts for oxytetracycline (OTC) degradation is an ideal strategy to tackle environmental pollution, and advanced oxidation processes (AOPs) have been widely used for its degradation. However, the studies on the activation of periodate (PI) by biochar and its composites in recent years have been scarcely reported. In this study, we focused on the degradation of OTC by PI activation with manganese oxide/biochar composites (Mn_xO_y@BC). Experimental results showed that the OTC degradation rate of Mn_xO_y@BC/PI system reached almost 98%, and the TOC removal efficiency reached 75%. Various characteristic analysis proved that PI could be activated efficiently by surface functional groups and manganese-active species (Mn(II), Mn(III), and Mn(IV)) on biochar, and various reactive species such as singlet oxygen (¹O₂), hydroxyl radical (∙OH), and superoxide radical (O₂^∙-) can be observed via radical quenching experiments. Based on this, three degradation pathways were proposed. Furthermore, Mn_xO_y@BC and PI were combined to degrade environmental pollutants, which achieved excellent practical benefits and had great practical application potential. We hope that it can provide new ideas for advanced oxidation processes (AOPs) applying for wastewater treatment in the future.

Synthesis of low-density polyethylene derived carbon nanotubes for activation of persulfate and degradation of water organic micropollutants in continuous mode

Plastic derived carbon nanotubes (CNTs) were tested as catalysts in persulfate activation for the first time. Four catalysts were prepared by wetness impregnation and co-precipitation (using Al₂O₃, Ni, Fe and/or Al) and implemented to grow CNTs by chemical vapour deposition (CVD) using low-density polyethylene (LDPE) as carbon feedstock. A catalyst screening was performed in batch mode and the best performing CNTs (CNT@Ni+Fe/Al₂O₃-cp) led to a high venlafaxine mass removal rate (3.17 mg g^-1 h^-1) in ultrapure water after 90 min (even with a mixture of micropollutants). Its degradation increased when the matrix was replaced by drinking water and negligibly affected in surface water. A composite polymeric membrane was then fabricated with CNT@Ni+Fe/Al₂O₃-cp and polyvinylidene fluoride (PVDF), a high venlafaxine mass removal rate in surface water being also observed in 24 h of continuous operation. Therefore, the results herein reported open a window of opportunity for the valorisation of plastic wastes in this catalytic application performed in continuous mode.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Selecting the most environmentally friendly oxidant for UVC degradation of micropollutants in urban wastewater by assessing life cycle impacts: Hydrogen peroxide, peroxymonosulfate or persulfate?

The quality of water bodies has been decreasing over time. Urban wastewater treatment plants (UWWTPs) are key players to avoid that potentially toxic micropollutants reach the environment, and advanced treatment processes are being applied to address this issue. However, several variables have to be taken into account, particularly environmental sustainability. The aim of this study is to assess the life cycle impacts of combining UVC with different oxidants - hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS) and persulfate (PS) -, considering different concentrations (0.05, 0.20 and 0.50 mM) and UVC dosages of 42, 63 and 170 J/L, corresponding to UV contact times of 4, 7 and 18 s in a specific industrial equipment. UVC/PMS was the worst performing process (despite being able to achieve removals similar to UVC/H₂O₂), followed by UVC/PS. Both would only be preferred relatively to H₂O₂ if much lower concentrations of PMS or PS could be used to achieve the same removal of micropollutants (10 times lower was not enough). Additionally, PMS and PS production contributes more to the environmental footprint than the electricity use, unlike H₂O₂. Therefore even if considering lower treatment times when using sulfate-based oxidants, these will still be more impactful than using H₂O₂ at the studied conditions. Based on both avoided and generated impacts, H₂O₂ is the best option environmentally. In this case, the environmental impacts are more affected by an increase in treatment time rather than by an increase in the H₂O₂ concentration. It is thus best to opt for a higher concentration and the lowest treatment time possible for a significant ecotoxicity reduction. Electricity is a relevant parameter in all cases and its impact can be reduced in nearly all endpoint categories by opting for cleaner energy sources.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Simultaneous degradation of glucocorticoids and sterilization using bubbling corona discharge plasma based systems: A promising terminal water treatment facility for hospital wastewater

Glucocorticoids (GCs) have drawn great concern due to their widespread contamination in the environment and application in treating patients with COVID-19. Due to the lack of data about GC removal using advanced treatment processes, a novel Paralleling and bubbling corona discharge reactor (PBCD) combined with iron-loaded activated-carbon fibre (Fe-ACF) was addressed in this study to degrade GCs represented by Hydrocortisone (HC) and Betamethasone (BT). The results showed that the PBCD-based system can degrade GCs effectively and can achieve effective sterilization. The removal rates of GCs were ranked as PBCD/Fe-ACF > PBCD/ACF > PBCD. The concentration of E. coli was reduced from 10⁹ to 10² CFU/mL after 60 min of PBCD-based system treatment. The abundance of bacteria in actual Hospital wastewater (HWW) was significantly reduced. Plasma changed the physical and chemical properties of ACF and Fe-ACF by etching axial grooves and enhancing stretching vibrations of surface functional groups, thus promoting adsorption and catalytic degradation. For GC degradation, the functional reactive species were identified as •OH, ¹O₂, and •O₂ radicals. Possible degradation pathways for HC and BT were proposed, which mainly included defluorination, keto acid decarboxylation, demethylation, intramolecular cyclization, cleavage and ester hydrolysis, indicating a reduction in GC toxicity. Since GCs are widely used in patients with COVID-19 and their wastewater needs to be sterilized simultaneously, the intensive and electrically driven PBCD-based system is promising in GC pollution control and sterilization in terminal water treatment facilities.

Efficient removal of organic pollutants by a Co/N/S-doped yolk-shell carbon catalyst via peroxymonosulfate activation

Carbon-based catalysts with heteroatom doping and hollow structures are desired for advanced oxidation processes (AOPs). Herein, dual-shelled Co, N, and S codoped hollow carbon nanocages were developed by wrapping zeolitic imidazolate framework-67 (ZIF-67) with trithiocyanuric acid (TCA) and performing subsequent carbonization. The optimal composite catalyst (Co-NC-CoS) exhibited excellent catalytic performance toward different organic pollutants. Almost complete removal of 4-NP (60 mg/L^-1) was achieved within 20 min by 10 mg of catalyst and 0.2 g/L^-1 peroxymonosulfate (PMS). Moreover, the catalyst showed good stability and reusability. The effects of catalyst and PMS dose, pollutant concentration, pH and common anions were investigated, and reactive oxygen species (ROS) were studied by scavenger experiments and electron paramagnetic resonance (EPR) tests. The results show that multidoped atoms S, Co and N all contributed to the degradation system. Several lines of evidence suggested that S could change the catalytic process from Co³⁺/Co²⁺ to Co³⁺/Co²⁺/Co⁰ reduction due to its low redox potential. Degradation was achieved through both radical and nonradical pathways, where sulfate radicals (SO₄^·̶), hydroxyl radicals (^·OH) and singlet oxygen (¹O₂) were primary reactive species. Overall, this work may suggest that the novel multi heteroatom-doped catalysts with complex structures can be developed for environmental remediation.

Enhanced degradation of tetracycline by Cu(II) complexation in the FeS/sulfite system

This study applied a mineral material of FeS to activate sulfite for efficient degradation of TTC in the presence of Cu(II) based on the identified complexation mechanism through UV-Vis spectra, FTIR spectroscopy and DFT calculation. pH plays an important role in TTC degradation and the initial pH of 6 and 7 were the divide in the contributions of FeS/sulfite oxidation and complex-precipitation. TTC-Cu(II) exhibits a superior promoting effect on the TTC degradation in FeS/sulfite system due to the improvement of TTC electron transfer reactivity and Fe(II) dissolution from FeS. Moreover, the formation of Cu(I) improved the recycling of Fe(II) from Fe(III). Dissolved oxygen-dependent free radicals' generation was confirmed, and TTC degradation was mainly attributed to SO₄^·- and ·OH. The characterization of FeS surface through XPS, XRD, SEM-EDS, Fe(II) deactivation tests, together with the comparison of pseudo-first-order rate constants for TTC degradation by FeS and ferrous ion supported the important role of surface and dissolved Fe(II) in sulfite activation. Furthermore, reasonable degradation pathways of TTC have been proposed according to the detected products by LC-MS. This work highlights the important role of pH, DO and Cu(II) complexation in sulfite activation and TTC degradation, furnishing theoretical support for further relevant studies.

Photo-Fenton superwettable NiFe2O4/TA/PVDF composite membrane for organic pollutant degradation with successively oil-in-water separation

With regard to the treatment of multicomponent wastewaters, to construct multifunctional super-wetting membranes is highly attractive in current decade. In this work, a low-cost and novel NiFe₂O₄/TA/PVDF composite membrane was fabricated via a facile in-situ deposition method under vacuum system. In which, photo-response NiFe₂O₄ nanoparticles were immobilized on the surface of flexible PVDF base membrane via hydrophilic tannic acid (TA) as the binder. The resulting composite membrane exhibited a special superwettability of superamphilicity in air and underwater superoleophobicity with a nanoscale rough surface structure. One the one hand, NiFe₂O₄/TA/PVDF membrane can be used a reusable catalyst in Photo-Fenton degradation of organic dyes with high efficiency. On the other hand, the composite membrane can effectively separate emulsified oils from representative oil-in-water emulsions with excellent separation efficiency all above 99 % and relatively high flux (880-1525 Lm^-2h^-1 bar^-1). More importantly, NiFe₂O₄/TA/PVDF composite membrane showed satisfactory processing efficiency, anti-fouling property and excellent reusability in deal with the mixed organic pollutants (water-insoluble emulsified oils and water-soluble organic dyes) existed in one aqueous system, which followed the procedure of initially photo-Fenton degradation of organic dyes emulsion and successively separation the remaining emulsion over the recovered membrane. This successful development of high-performance NiFe₂O₄/TA/PVDF composite membrane will provide a new candidate for both oil/water separation and organic wastewater treatment, as well as promote the utilization of spinel ferrites in the construction of multifunctional membrane for environmental purification.

Cavitation based treatment of industrial wastewater: A critical review focusing on mechanisms, design aspects, operating conditions and application to real effluents

Acoustic cavitation (AC) and hydrodynamic cavitation (HC) coupled with advanced oxidation processes (AOPs) are prominent techniques used for industrial wastewater treatment though most studies have focused on simulated effluents. The present review mainly focuses on the analysis of studies related to real industrial effluent treatment using acoustic and hydrodynamic cavitation operated individually and coupled with H₂O₂, ozone, ultraviolet, Fenton, persulfate and peroxymonosulfate, and other emerging AOPs. The necessity of using optimum loadings of oxidants in the various AOPs for obtaining maximum COD reduction of industrial effluent have been demonstrated. The review also presents critical analysis of designs of various HCRs that have been or can be used for the treatment of industrial effluents. The impact of operating conditions such as dilution, inlet pressure, ultrasonic power, pH, and operating temperature have been also discussed. The economic aspects of the industrial effluent treatment have been analyzed. HC can be considered as cost-efficient approach compared to AC on the basis of the lower operating costs and better transfer efficiencies. Overall, HC combined with AOPs appears to be an effective treatment strategy that can be successfully implemented at industrial-scale of operation.

Comparative investigation of acetaminophen degradation in aqueous solution by UV/Chlorine and UV/H2O2 processes: Kinetics and toxicity assessment, process feasibility and products identification

The degradation of acetaminophen (ACM) was comparatively studied by UV/chlorine and UV/H₂O₂ systems. An apparent reduction in the removal rate was observed above the optimum pH levels of 7.0 and 3.0 in UV/chlorine and UV/H₂O₂ processes, respectively. The relative contribution of each oxidizing agent in ACM removal using the two advanced oxidation processes (AOPs) was evaluated. Even though hydroxyl radicals, with the contribution percentage of 90.1%, were determined as the primary oxidizing species in ACM removal using the UV/H₂O₂ process, reactive chlorine species (RCS), with 43.8% of contribution percentage, were also found to play a pivotal role in ACM removal using the UV/chlorine process. For instance, dichlorine radical (Cl₂^•-) showed an acceptable contribution percentage of 32.2% in the degradation of ACM by the UV/chlorine process. The rate of ACM degradation significantly rose to 99.9% and 75.6%, as higher amounts of oxidants were used in the UV/chlorine and UV/H₂O₂ processes, respectively, within 25 min. The introduction of HCO₃^- ions and humic acid remarkably decreased the rate of ACM degradation in both techniques used in this study. The presence of NO₃^- and Cl^- ions did not considerably affect the removal rate in the UV/chlorine process. The acute toxicity analysis revealed that a more pronounced reduction in the ACM solution toxicity could be achieved by the UV/H₂O₂ process compared to the UV/chlorine process, which should be ascribed to the formation of chlorinated products in the UV/chlorine treatment. Eventually, plausible oxidation pathways were proposed for each process.

Comparative overview of advanced oxidation processes and biological approaches for the removal pharmaceuticals

Nowadays, pharmaceuticals are the center of significant environmental research due to their complex and highly stable bioactivity, increasing concentration in the water streams and high persistence in aquatic environments. Conventional wastewater treatment techniques are generally inadequate to remove these pollutants. Aiming to tackle this issue effectively, various methods have been developed and investigated on the light of chemical, physical and biological procedures. Increasing attention has recently been paid to the advanced oxidation processes (AOPs) as efficient methods for the complete mineralization of pharmaceuticals. Their high operating costs compared to other processes, however, remain a challenge. Hence, this review summarizes the current and state of art related to AOPs, biological treatment and their effective exploitation for the degradation of various pharmaceuticals and other emerging molecules present in wastewater. The review covers the last decade with a particular focus on the previous five years. It is further envisioned that this review of advanced oxidation methods and biological treatments, discussed herein, will help readers to better understand the mechanisms and limitations of these methods for the removal of pharmaceuticals from the environment. In addition, we compared AOPs and biological treatments for the disposal of pharmaceuticals from the point of view of cost, effectiveness, and popularity of their use. The exploitation of coupling AOPs and biological procedures for the degradation of pharmaceuticals in wastewater was also presented. It is worthy of note that an integrated AOPs/biological system is essential to reach the complete degradation of pharmaceuticals; other advantages of this hybrid technique involve low energy cost, an efficient degradation process and generation of non-toxic by-products.

Water stable SiO2-coated Fe-MOF-74 for aqueous dimethyl phthalate degradation in PS activated medium

The poor water stability of metal-organic frameworks (MOFs) significantly hindered their catalytic application in advanced oxidation system. A protective outer layer was an effective strategy to solve this problem. However, the commonly used coating techniques are too complicated or too difficult to accurately control, thus, the applicability was relatively low. In this study, a water stable MOF core-SiO₂ shell nanomaterial (Fe-MOF-74@SiO₂) was synthesized by a facile hydrothermal method, and applied to activate persulfate (PS) for dimethyl phthalate (DMP) degradation. The catalyst water stability and DMP degradation in the system were investigated, suggesting that the SiO₂-coated catalyst was more stable and exhibited higher DMP degradation efficiency over the pure MOF. It was found that pH had negligible effects on Fe-MOF-74@SiO₂ + PS system, while, higher temperature facilitated the degradation of DMP. The activation mechanism was studied by quenching experiments combined with electron paramagnetic resonance, indicating that SO₄^⋅- played a major role in the activation of PS with Fe-MOF-74@SiO₂ for DMP removal, while ^⋅OH also involved in the catalytic process. Finally, possible DMP degradation pathways were proposed. These findings indicated that the core-shell structured Fe-MOF-74@SiO₂ showed promise for DMP degradation by PS advanced oxidation system.

Evaluation and comparison of advanced oxidation processes for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D): a review

Organochlorine pesticides have generated public concern worldwide because of their toxicity to human health and the environment, even at low concentrations, and their persistence, being mostly nonbiodegradable. The use of 2,4-dichlorophenoxyacetic acid (2,4-D) has increased in recent decades, causing severe water contamination. Several treatments have been developed to degrade 2,4-D. This manuscript presents an overview of the physicochemical characteristics, uses, regulations, environmental and human health impacts of 2,4-D, and different advanced oxidation processes (AOPs) to degrade this organic compound, evaluating and comparing operation conditions, efficiencies, and intermediaries. Based on this review, 2,4-D degradation is highly efficient in ozonation (system O₃/plasma, 99.8% in 30 min). Photocatalytic, photo-Fenton, and electrochemical processes have the optimal efficiencies of degradation and mineralization: 97%/79.67% (blue TiO₂ nanotube arrays//UV), 100%/98% (Fe²⁺/H₂O₂/UV), and 100%/84.3% (MI-meso SnO₂), respectively. The ozonation and electrochemical processes show high degradation efficiencies, but energy costs are also high, and photocatalysis is more expensive with a separation treatment used to recover the catalyst in the solution. The Fenton process is a viable economic-environmental option, but degradation efficiencies are often low (50-70%); however, they are increased when solar UV radiation is used (90-100%). AOPs are promising technologies for the degradation of organic pollutants in real wastewater, so evaluating their strengths and weaknesses is expected to help select viable operational conditions and obtain optimal efficiencies.

Formation of disinfection by-products in a UV-activated mixed chlorine/chloramine system

In recent years, ultraviolet (UV) irradiation coupled with chlor(am)ination process is ubiquitous in secondary water supply systems in many cities of China. However, the disinfection by-products (DBPs) formation in a UV-activated mixed chlorine/chloramine system (MCCS) still remains unclear. In this study, the DBPs formation in a UV-activated MCCS was systematically investigated, considering influencing factors including the mass ratios of free chlorine to NH₂Cl, UV irradiation, pH values, NOM types, Br^- concentration and toxicity of the DBPs. Results indicated that DBPs formation decreased remarkably as mass ratio of free chlorine to NH₂Cl changed from 5:0 to 0:5. The DBPs formation in humic acid (HA)-containing water was the highest, followed by those in fulvic acid (FA) and algal organic matter (AOM). Besides, better control of the DBP-related calculated toxicity can be achieved in acidic conditions regardless of the UV irradiation. Furthermore, in the presence of Br^-, a significant reduction of DBPs formation could be achieved in a UV-activated MCCS. The findings also demonstrated that DBPs formation in real water can be effectively reduced at high UV fluence in a MCCS.

A life cycle assessment of solar-based treatments (H2O2, TiO2 photocatalysis, circumneutral photo-Fenton) for the removal of organic micropollutants

Micropollutants have been linked to freshwater and human toxicity. Their occurrence in water bodies arises from different causes, including the discharge of effluents from conventional urban wastewater treatment plants, which are not designed for their removal. The addition of an advanced treatment process for this purpose will allow a toxicity reduction; however, such will also imply further resources and energy use resulting in other environmental impacts. Energy use is a particularly relevant hotspot of the environmental impacts associated with advanced treatments; therefore, solar-based treatments have great potential in this field. The present study assessed the environmental impacts via life cycle assessment (LCA) of five solar-based treatments - solar photolysis (with and without H₂O₂), photocatalysis using TiO₂ (with and without H₂O₂) and circumneutral photo-Fenton - using a pilot-scale compound parabolic collector photoreactor to select the most suitable option for the removal of micropollutants (carbamazepine, diclofenac and sulfamethoxazole; 5 μg/L) from a secondary-treated wastewater. The ranking of solar treatments per highest generated impacts is, overall, as follows: circumneutral photo-Fenton > TiO₂-P25/H₂O₂ > TiO₂-P25 > solar/H₂O₂ > solar. While solar photolysis uses fewer resources and energy, thus generating lower environmental impacts, the common incomplete mineralization of the parent micropollutants implies that toxicity reduction cannot be guaranteed in this case. Aiming for a balance between ecotoxicity reduction and the impacts caused by the application of each technology, the solar TiO₂-P25 treatment, which was here investigated by LCA for the first time to remove organic micropollutants from secondary-treated urban wastewater, appears to be the most suitable option at the studied conditions (and when TiO₂ is reused at least 5 times). One of the environmental downfalls of the assessed treatments is the energy required to produce the chemicals, and so the importance of minimizing external energy use during the application of advanced treatment processes is reinforced.

Theoretical exploration of VOCs removal mechanism by carbon nanotubes through persulfate-based advanced oxidation processes: Adsorption and catalytic oxidation

Carbon-catalyzed persulfate activation for the removal of gaseous volatile organic compounds (VOCs) has not been reported yet, and the corresponding fundamental mechanisms of VOCs adsorption and the subsequent VOCs degradation remain controversial. In this work, theoretical chemistry calculations were carried out to explore the VOCs removal mechanism by the persulfate-based advanced oxidation processes (P-AOPs) for VOCs removal over single walled carbon nanotubes (SWCNT). This study provided detailed theoretical insights into the SWCNT/P-AOPs for VOCs treatment in terms of adsorption, activation, mineralization, and diffusion of VOCs or peroxymonosulfate (PMS). Various VOCs were found to be preferentially adsorbed onto SWCNT, and the adsorption strength of VOCs was found to be significantly dependent on their polarizability. On the other side, PMS adsorbed on SWCNT could be efficiently activated through accepting π electron in the sp² carbon matrix of SWCNT rather than the electrons at dangling bonds to generate •OH radicals attributed to the strong interaction between PMS and SWCNT. Formaldehyde was then taken as an example to evaluate the catalytic degradation pathways via SWCNT/P-AOPs. Under the attack of •OH radicals, the ultrafast degradation pathway of formaldehyde with no byproduct CO was identified with ultralow reaction energy barrier and large energy release. In addition, factors affecting the adsorption of organic compounds were identified and the detailed PMS activation pathway was present directly in this work. Above all, this work extended the carbons/P-AOPs system to VOCs abatement and presented systematic evidences for the essential mechanisms associated with VOCs adsorption and PMS activation by SWCNT, and the corresponding removal pathway and mechanism were also understood.

A new perspective towards in-situ cold plasma remediation of polluted sites: Direct generation of micro-discharges within contaminated medium

The in-situ treatment of solid wastes might be regarded as cost-effective and minimum environmental fingerprint solution, particularly with reference to contaminated soils, offering several benefits compared to ex-situ methods. In this short communication it is described the study of a lab-scale coaxial dielectric barrier discharge (DBD) plasma reactor simulating the in-situ soil remediation conditions for the first time. In this conceptual design, the contaminated medium is handled as a part of the electrical discharge, while the plasma discharges are produced directly within the contaminated porous medium under treatment, thus scattering reactive species directly in the air contained inside its interconnected pores. The in-situ cold plasma setup was used to remediate bauxite samples highly contaminated by oil sludge contaminants. A very high TOC removal (∼70%) was achieved after 30 min of plasma treatment time with the corresponding energy consumption being 0.53 kWh kg^-1. Carbon balance analysis of the exhaust gases revealed that 61% of the removed pollutant was converted to CO₂, 19% was decomposed to CO, and 20% was emitted as VOCs. The scale-up of the presented in-situ cold plasma approach could lead to a promising alternative for the fast, cost-effective, and green in-situ remediation of granular porous, heavily contaminated with hydrocarbons contaminated sites.

Comparison of acoustic and hydrodynamic cavitation based hybrid AOPs for COD reduction of commercial effluent from CETP

The present work investigates the treatment of commercial effluent obtained from Common Effluent Treatment Plants (CETP) using acoustic cavitation (AC) and hydrodynamic cavitation (HC) based hybrid AOPs. Comparison of different hybrid AOPs viz. H₂O₂, Fe²⁺/H₂O₂, Fe²⁺/H₂O₂/Air, Fe²⁺/H₂O₂/S₂O₈^2- and Fe²⁺/H₂O₂/S₂O₈^2-/Air in combination with both AC and HC has been performed in terms of extent of chemical oxygen demand (COD) reduction and kinetic rate constants. The best results of COD reduction as 95.2% and 97.28% were obtained for AC/Fe²⁺/H₂O₂/Air and HC/Fe²⁺/H₂O₂/Air systems respectively at Fe²⁺/H₂O₂ ratio of 0.1 and pH of 2 within 60 min of treatment under conditions of ultrasonic power dissipation as 150 W, inlet pressure for HC as 4 bar (as applicable depending on process) and temperature of 30 ± 2 °C. Slightly lower efficacy was established for the combination approach involving AC or HC coupled with Fe²⁺-activated S₂O₈^2- and H₂O₂ yielding COD reduction of 82.9% and 86.93% for the AC/Fe²⁺/H₂O₂/S₂O₈^2-/Air and HC/Fe²⁺/H₂O₂/S₂O₈^2-/Air systems respectively at Fe²⁺/H₂O₂/S₂O₈^2- ratio of 1:40:17.5. Cost estimation on the basis of cavitational yield performed on the AC and HC based treatment systems revealed economical nature of HC based treatment. Kinetic studies were also performed by fitting the experimental data with pseudo first order kinetic model (PFOKM), generalized kinetic model (GKM) and Behnajady-Modirshahla-Ghanbery kinetic model (BMGKM). It was demonstrated that GKM provided best fitting for all the experiments whereas BMGKM was most suitable for Fenton based reactions. It was clearly established that complex CETP effluent can be effectively treated using the combined approaches based on HC with potential for larger scale operation.

Optimization of Fenton process for removing TOC and color from swine wastewater using response surface method (RSM)

The Fenton oxidation process was applied to biologically treated swine wastewater (BSWW) for the removal of TOC and color constituents after coagulation with FeCl₃. Optimizing of operational variables such as FeSO₄ and H₂O₂ doses was achieved by the response surface method (RSM). Statistical analysis led to the conclusion that FeSO₄ is the more important than H₂O₂ in the removal of TOC. However, H₂O₂ plays a more significant role than FeSO₄ in color removal. The optimal conditions for effective removal of TOC and color from swine wastewater were derived by using process optimization. The experimental results show that overall removal of TOC and color is 76.7% and 98%, respectively, when optimal conditions of 800 mg/L (FeSO₄) and 5207 mg/L (H₂O₂) at 120 min were used. Furthermore, the optimization model produces a desirability value of 0.980 that verifies the optimal conditions. Finally, it is observed that removal of undesirable compounds follows a pseudo-first order and pseudo-second order kinetics model with high R² values of 0.99 for both TOC and color removal, respectively. Statistical analysis and process optimization show that the employed model may determine conditions conducive to the effective removal of TOC and color from swine wastewater.

Efficient photocatalytic destruction of recalcitrant micropollutants using graphitic carbon nitride under simulated sunlight irradiation

The ubiquity of micropollutants (MPs) in aquatic environments has attracted increasing concern for public health and ecological security. Compared to conventional biological treatment, photocatalytic processes show more efficiency in degrading MPs, but they require expensive materials and complicated synthesis processes. This study developed an economic photocatalytic process to degrade micropollutants. We synthesized urea-based graphitic carbon nitride (g-C₃N₄) by a facile one-step pyrolysis method and evaluated the photocatalytic efficiency of carbamazepine (CBZ). Under simulated solar irradiation, g-C₃N₄ could achieve 100% removal efficiency of 0.1 mg/L CBZ in spiked wastewater effluent within 15 min, and 86.5% removal efficiency in wastewater influent after 20 min of irradiation. The porous structure of g-C₃N₄ promoted effective charge separation and mass transport of CBZ near the catalyst surface, enabling a high kinetic rate (0.3662 min ^-1). Reactive oxygen species trapping experiments revealed that superoxide radicals (O₂ ^•-) and holes (h⁺) were the major active radicals. Electron paramagnetic resonance (EPR) further confirmed the presence of O₂ ^•-, ^• OH, ¹O₂ and holes. The pH, light intensity and initial CBZ concentration were found to have significant impacts on the removal efficiency of CBZ. Possible reaction intermediates were identified and the degradation pathway was proposed. Multiple MPs were selected to further demonstrate photocatalytic efficiency of g-C₃N₄. The facile synthesis, superior efficiency, and versatility of g-C₃N₄ make it a promising catalyst for application in tertiary wastewater treatment processes.

Acetaminophen degradation by a synergistic peracetic acid/UVC-LED/Fe(II) advanced oxidation process: Kinetic assessment, process feasibility and mechanistic considerations

Application of peracetic acid (PAA) in Advanced Oxidation Processes (AOPs) has seen an increase in the last few years. In this study, PAA/UVC-LED/transition metal was used to degrade acetaminophen (ACT) in an aqueous solution. Amongst tested transition metals (Fe, Cu, Co, Mn, Ag), Fe(II) demonstrated the highest efficiency. The effect of pH, PAA dosage, initial concentration of ACT and Fe(II) concentration was investigated on ACT removal. More than 95% removal efficiency was obtained in 30 min employing pH = 5.0, PAA 4 mM and 0.5 mM Fe(II) (k_app = 0.0993 min^-1). Scavenging experiments highlighted the contribution of oxygen-centered radicals; however, the dominant mechanism is hydroxyl radical-induced, while the superoxide radicals had a negligible role. The effect of anions in water showed that carbonate, (dihydrogen) phosphate and nitrite ions had a strong inhibitory effect, while a neutral effect was observed by sulfate, nitrate and chloride ions. Seven intermediates of ACT oxidation were determined and the ACT degradation pathway by the PAA/UVC-LED/Fe(II) is presented. The efficacy of the PAA/UVC-LED/Fe(II) process was also verified for the degradation of other contaminants of emerging concern and disinfection of fecal indicator microorganisms in real matrix (secondary WW). In conclusion, the studied PAA/UVC-LED/Fe(II) process opens a new perspective as a promising application of advanced oxidation for the degradation of organic pollutants.