1
|
Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation. THE SCIENCE OF THE TOTAL ENVIRONMENT 2024; 929:172677. [PMID: 38663594 DOI: 10.1016/j.scitotenv.2024.172677] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/20/2024] [Revised: 04/19/2024] [Accepted: 04/20/2024] [Indexed: 04/29/2024]
Abstract
Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58-68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.
Collapse
|
2
|
Integration of a facile sustainable resonance Rayleigh scattering switchable-based system for feasible determination of centrophenoxine, a nootropic and antioxidant agent; application to crude materials and dosage forms. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2024; 313:124107. [PMID: 38452459 DOI: 10.1016/j.saa.2024.124107] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 02/28/2024] [Accepted: 03/02/2024] [Indexed: 03/09/2024]
Abstract
The proposed research adheres to a certain methodology to ensure that the technique used for analyzing the centrophenoxine drug is sustainable and green. It is important to highlight that several tools that have been recently developed were utilized as potential indicators of environmental sustainability and applicability. The present research presents a novel and entirely innovative method utilizing ultrasensitive spectrofluorimetry for the detection of centrophenoxine (CPX) drug. The employed methodology in this study involved the utilization of one-step, one-pot, and direct spectrofluorimetric technique, which was found to be both efficient and environmentally sustainable in the validation and assessment of the drug. Simply, when CPX and erythrosine B reagent were combined in an acidic environment, the highly resonance Rayleigh scattering product was immediately produced. The sensitivity limits were observed to be within the range of 15-47 ng mL-1, whereas the linearity was assessed to be in the range of 50-2000 ng mL-1. The optimal settings for all modifiable parameters of the system were ascertained through an analysis of centrophenoxine-erythrosine B complexes. Moreover, the system demonstrated compliance with International Council for Harmonization (ICH) specifications without encountering any issues. The suggested process was then rated on different recent environmental safety measuring metrics to see how good it was for the environment. Fortunately, the WAC standards that combine ecological and functional elements utilizing the Green/Red/Blue (RGB 12) design also acclaimed the current analytical technique as a white one. Additionally, a new applicability evaluation tool (BAGI) was employed to estimate the practicability of the planned method in the analytical chemistry field.
Collapse
|
3
|
Controlling the Uptake and Release of Semiochemicals in Channel-Type Metal-Organic Frameworks Through Pore Expansion. Chemistry 2024:e202401407. [PMID: 38699860 DOI: 10.1002/chem.202401407] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/10/2024] [Revised: 05/01/2024] [Accepted: 05/03/2024] [Indexed: 05/05/2024]
Abstract
Semiochemicals can be used to manipulate insect behaviour for sustainable pest management strategies, but their high volatility is a major issue for their practical implementation. Inclusion of these molecules within porous materials is a potential solution to this issue, as it can allow for a slower and more controlled release. In this work, we demonstrate that a series of Zr(IV) and Al(III) metal-organic frameworks (MOFs) with channel-type pores enable controlled release of three semiochemicals over 100 days by pore size design, with the uptake and rate of release highly dependent on the pore size. Insight from grand canonical Monte Carlo simulations indicates that this is due to weaker MOF-guest interactions per guest molecule as the pore size increases. These MOFs are all stable post-release and can be reloaded to show near-identical re-release profiles. These results provide valuable insight on the diffusion behaviour of volatile guests in MOFs, and for the further development of porous materials for sustainable agriculture applications.
Collapse
|
4
|
On the Dendrite-Suppressing Effect of Laser-Processed Polylactic Acid-Derived Carbon Coated Zinc Anode in Aqueous Zinc Ion Batteries. Angew Chem Int Ed Engl 2024:e202405048. [PMID: 38656647 DOI: 10.1002/anie.202405048] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/13/2024] [Revised: 04/24/2024] [Accepted: 04/24/2024] [Indexed: 04/26/2024]
Abstract
A major bottleneck limiting the commercialization of aqueous zinc ion batteries (AZIBs) is dendrite formation on the zinc anode during the plating/stripping process, which leads to rapid performance and device failure. In this regard, researchers are trying to design more stable anodes toward suppressing dendrite formation. One possible solution to tackle this problem and to extend the cycling life of AZIBs is to modify the zinc anode surface by coating carbonaceous materials, enabling controlled charge flux and uniform ion distribution. This work reports a sustainable and bio-derived polylactic acid (PLA) as a coating layer on the zinc anode. Carbonizing this polymer under ambient conditions using a high-power nanosecond laser forms a carbon-coated zinc foil, which was directly utilized as the anode in aqueous zinc ion batteries. The fabricated laser-processed PLA-derived carbon-coated zinc anode demonstrated an extended cycling life of almost 1600 hours, significantly outperforming the bare zinc anode. A full aqueous zinc ion battery assembled from as-modified anode and as-prepared V2O5 nanofibers as cathode was able to deliver a specific capacity of 238 mAh g-1 at 1.0 A g-1 with a capacity retention of 70 % after 1000 cycles.
Collapse
|
5
|
The Future of Chemical Sciences is Sustainable. Angew Chem Int Ed Engl 2024:e202318676. [PMID: 38570864 DOI: 10.1002/anie.202318676] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/05/2023] [Indexed: 04/05/2024]
Abstract
Chemistry, a vital tool for sustainable development, faces a challenge due to the lack of clear guidance on actionable steps, hindering the optimal adoption of sustainability practices across its diverse facets from discovery to implementation. This Scientific Perspective explores established frameworks and principles, proposing a conciliated set of triple E priorities anchored on Environmental, Economic, and Equity pillars for research and decision making. We outline associated metrics, crucial for quantifying impacts, classifying them according to their focus areas and scales tackled. Emphasizing catalysis as a key driver of sustainable synthesis of chemicals and materials, we exemplify how triple E priorities can practically guide the development and implementation of processes from renewables conversions to complex customized products. We summarize by proposing a roadmap for the community aimed at raising awareness, fostering academia-industry collaboration, and stimulating further advances in sustainable chemical technologies across their broad scope.
Collapse
|
6
|
Valorization of Chicken Viscera as Natural Raw Material Source: Application to Hydrolysis of Fatty Esters for Sewage Treatment. Appl Biochem Biotechnol 2024:10.1007/s12010-024-04915-5. [PMID: 38530539 DOI: 10.1007/s12010-024-04915-5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 03/04/2024] [Indexed: 03/28/2024]
Abstract
"Chicken viscera" constitutes very abundant domestic wastes interestingly investigated in the present paper. The efficiency of this crude slaughter co-product of high protein component, as biocatalyst, for the hydrolysis of fatty acid esters was reported and that, without any pre-treatment. The crude chicken intestine powder (CIP) has shown a high reactivity for the hydrolysis of fatty esters. Two biocatalyst preparations were independently explored for the bioresolution of sec-phenyl alkyl carbinol esters: the CIP preparation and the crude chicken intestine acetone powder CIAP preparation. The last one has shown good catalytic activity during the bio-hydrolysis in biphasic medium. Furthermore, the direct hydrolysis of milk fat using CIAP (500 mg) reveals the elimination of fats present in 50 ml of treated milk. These results open up very interesting prospects for the use of this biowaste for the treatment of milk fat.
Collapse
|
7
|
Scalability of Pharmaceutical Co-Crystal Formation by Mechanochemistry in Batch. CHEMSUSCHEM 2024; 17:e202301220. [PMID: 37975728 DOI: 10.1002/cssc.202301220] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/18/2023] [Revised: 11/16/2023] [Accepted: 11/17/2023] [Indexed: 11/19/2023]
Abstract
The development of mechanochemistry is considerably growing. Benign by design, this technology complies with several principles of green chemistry, contributing to the achievement of the United Nations Sustainable Development Goals (UN SDGs) and the European Green Deal objectives. Herein, we report the use of mechanochemical processes in batch to prepare kilogram-scale of the Active Pharmaceutical Ingredient (API): Ibuprofen-Nicotinamide (rac-IBP:NCT) co-crystal in an industrial eccentric vibration mill. This scenario shows a sustainable approach to the industrial up-scaling of pharmaceutical co-crystals by a solvent-free mechanochemical process in batch. The quantitative assessment of the greenness of the mechanochemical process against the Twelve Principles of Green Chemistry was performed using the DOZN 2.0 Green Chemistry Evaluator.
Collapse
|
8
|
Rapid Dissolution of Gold in Alcohols by In-Situ Generation of Halogens. CHEMSUSCHEM 2024:e202301695. [PMID: 38412014 DOI: 10.1002/cssc.202301695] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/17/2023] [Revised: 02/09/2024] [Accepted: 02/27/2024] [Indexed: 02/28/2024]
Abstract
The dissolution of elemental gold is a fundamental step in its recycling by hydrometallurgy but has a significant environmental impact due to the use of strong acids or highly toxic reagents. Herein, it is shown that mixtures of acetyl halides and hydrogen peroxide in alcohols promote the rapid room-temperature dissolution of gold by halogenation to form Au(III) metalates. After leaching, distillation of the alcohol and re-dissolution in dilute HCl, the gold was refined through its precipitation by a simple diamide ligand; this method was also applied to separate gold from a mixture of metals. The leaching process is rapid, avoids the use of highly toxic materials and corrosive acids, and can be integrated into selective separation processes, so has the potential to be used in the purification of gold from ores, spent catalysts, and electronic and nano-waste.
Collapse
|
9
|
Sustainable Green Synthesis of Pyrimidine Derivatives: Review on Multicomponent Synthesis, Catalysts and Techniques. Curr Org Synth 2024; 21:127-139. [PMID: 36998127 DOI: 10.2174/1570179420666230330081211] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/28/2022] [Revised: 01/09/2023] [Accepted: 01/12/2023] [Indexed: 04/01/2023]
Abstract
"The founder of green chemistry explains how chemicals manufacturing must change to support a sustainable future." In this review, Green chemistry is considered in the synthesis of heterocycles compounds containing Pyrimidine nuclei using different catalyzes, solvents, and techniques for the synthesis of pyrimidine derivatives that achieve sustainability. The mentioned fused heterocycles are classified according to the type of ring system. The yield of the target molecules reported in the review is given in the reaction's last step.
Collapse
|
10
|
Gas-phase hydrogenation of furfural into value-added chemicals: The critical role of metal-based catalysts. THE SCIENCE OF THE TOTAL ENVIRONMENT 2023; 904:166882. [PMID: 37678523 DOI: 10.1016/j.scitotenv.2023.166882] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Revised: 08/17/2023] [Accepted: 09/04/2023] [Indexed: 09/09/2023]
Abstract
Furfural (FF: aldehyde derivable from lignocellulosic biomass) has been widely recognized as a versatile building block for eco-friendly and sustainable applications to reduce industrial reliance on fossil-fuel carbon sources. Hydrogenation of FF, in particular, is recognized as one of the most effective routes for producing various value-added chemicals (e.g., furfuryl alcohol and 2-methylfuran). The gas-phase FF hydrogenation reaction offers economic and environmental advantages over its liquid-phase counterpart in conversion efficiency, product selectivity, and kinetics. The operation of the former does not require high hydrogen pressures or hazardous solvents while not generating undesirable by-products (due to reduced selectivity toward the ring-opening reaction). In this context, the utility of noble and non-noble metal catalyst systems has been recognized for their potential to induce effective FF hydrogenation in the gas phase. The present review addresses current understandings and recent developments in research on gas-phase FF hydrogenation and the factors governing the performance of metal-based catalysts (e.g., materials and surface chemistry; conversion efficiency; product selectivity; and the mechanisms, pathways, and kinetics of the associated reactions). Current shortcomings and research avenues are also discussed to help establish a roadmap for future development of the gas-phase FF hydrogenation technology and associated disciplines. Overall, the present review is expected to offer much-needed insights into the scalability of metal-based catalytic systems for efficient FF hydrogenation in the gas phase.
Collapse
|
11
|
Menthol-based deep eutectic systems as antimicrobial and anti-inflammatory agents for wound healing. Eur J Pharm Sci 2023; 182:106368. [PMID: 36572356 DOI: 10.1016/j.ejps.2022.106368] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/26/2022] [Revised: 12/19/2022] [Accepted: 12/22/2022] [Indexed: 12/24/2022]
Abstract
Effective antimicrobial treatment has been identified as a serious and unmet medical need. Herein, we present a strategy based on deep eutectic systems (DES) to overcome current limitations, answering the need not only to effectively kill bacterial agents but also to avoid their adhesion and proliferation, which is associated with biofilm formation and have a crucial impact on bacterial virulence. To achieve such a goal, natural deep eutectic systems (NADES) based on menthol (Me) and saturated free fatty acids (FFA) were produced, fully physicochemical characterized, and its bioactive properties were described. The antimicrobial potential of menthol-based NADES with FFA, namely, myristic acid (MA), lauric acid (LA), and stearic acid (SA) were investigated towards a broad panel of microorganisms. The obtained data indicates that NADES possess effective antimicrobial properties towards the Gram-positive bacterial and fungal strains tested. Among the tested formulations, Me:LA at a molar ratio of 4:1 molar was used to carry out a biofilm detachment/removal assay due to is superior microbiological properties. This formulation was able to effectively lead to biofilm removal/dispersion of not only methicillin-resistant Staphylococcus aureus (MRSA) and Candida albicans, but also Escherichia coli, without the need of any additional physical force or antibiotic. Furthermore, since microbial invasion and biofilm formation is highly undesired in wound healing, namely in chronic wound healing, the wound healing properties of these eutectic formulations was also investigated. The results suggest that these NADES can cope with microbial invasion and biofilm detachment while not compromising normal keratinocyte proliferation and migration verified in wound healing and epidermis repair, while also contributing to the reduction of cell stress and inflammation via the control of ROS production. In conclusion, these results provide the indication that NADES based on Me and FFA holds great interest as antimicrobial agents for preventive and therapeutic applications in various clinical settings, including wound healing.
Collapse
|
12
|
Flow-based green ceramics microdevice with smartphone image colorimetric detection for free chlorine determination in drinking water. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2023; 287:122096. [PMID: 36371811 DOI: 10.1016/j.saa.2022.122096] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2022] [Revised: 11/01/2022] [Accepted: 11/06/2022] [Indexed: 06/16/2023]
Abstract
The residual free chlorine concentration is an important parameter to evaluate the potability of water and the efficiency of disinfection in the water treatment system. As a restricted range of residual free chlorine concentration at all points of the distribution network is needed to ensure efficiency and to avoid deleterious effects, fast and in situ quantification of this specie is important. This work deals with the development and validation of two procedures based on DPD (N,N-diethyl-p-phenylenediamine) and OT (ortho-tolidine, 3,3-dimethylbenzidine) for the determination of residual free chlorine in water by exploiting a flow-based microdevice built with Low Temperature Co-Fired Ceramic (LTCC) technology. The analytical signal was monitored by a smartphone camera through RGB values obtained by a free application (Color Grab®). Under optimized conditions, linear ranges within 0.6-2.5 mg/L and 0.1-2.3 mg/L were obtained for DPD and OT methods, with limits of detection and quantification of 0.023 and 0.077 mg/L (DPD) and 0.026 and 0.089 mg/L (OT). Precision expressed as RSD (2.0 mg/L free chlorine, n = 10), was 1.3 % and 0.7 %, respectively. Both procedures were successfully applied to the analysis of samples from a water treatment plant. The flow-based microdevice coupled to digital-image colorimetry is an innovative, sustainable, and cost-effective analytical tool for in-field chemical analysis.
Collapse
|
13
|
Bio-Polypropylene and Polypropylene-based Biocomposites: Solutions for a Sustainable Future. Chem Asian J 2023; 18:e202200972. [PMID: 36461701 DOI: 10.1002/asia.202200972] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/22/2022] [Revised: 11/16/2022] [Indexed: 11/23/2022]
Abstract
Polypropylene (PP) is among the most widely used commodity plastics in our everyday life due to its low cost, lightweight, easy processability, and exceptional chemical, thermo-mechanical characteristics. The growing awareness on energy and environmental crisis has driven global efforts for creating a circular economy via developing sustainable and eco-friendly alternatives to traditional plastics produced from fossil fuels for a variety of end-use applications. This review paper presents a brief outline of the emerging bio-based PP derived from renewable natural resources, covering its production routes, market analysis and potential utilizations. This contribution also provides a comprehensive review of the PP-based biocomposites produced with diverse green fillers generated from agro-industrial wastes, with particular emphasis on the structural modification, processing techniques, mechanical properties, and practical applications. Furthermore, given that the majority of PP products are currently destined for landfills, research progress on enhancing the degradation of PP and its biocomposites is also presented in light of the environmental concerns. Finally, a brief conclusion with discussions on challenges and future perspectives are provided.
Collapse
|
14
|
Reinventing the wheel: A critical look at one-world and circular chemistries. STUDIES IN HISTORY AND PHILOSOPHY OF SCIENCE 2022; 96:112-120. [PMID: 36206586 DOI: 10.1016/j.shpsa.2022.09.004] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/17/2022] [Revised: 08/22/2022] [Accepted: 09/12/2022] [Indexed: 06/16/2023]
Abstract
With the rise of environmental awareness among chemists, more and more programmatic frameworks try to guide chemists to conduct research in an ethical manner. While green chemistry remains the most popular and influential of these concepts, not all scholars choose to embrace it. One world chemistry and circular chemistry are examples of this new trend. They constitute an attempt to profoundly reshape the practice of chemistry along new lines to make the discipline more relevant to the changing social, environmental and economic reality. And yet, both concepts betray a lack of familiarity with the recent history of chemistry and of sustainability undermining their overall message. The article indicates that the history of chemistry can play a crucial role in enriching the conversation on the direction chemistry should take towards the socio-environmental transition.
Collapse
|
15
|
Novel and sustainable carboxylation of terminal alkynes and CO 2 to alkynyl carboxylic acids using triazolium ionic liquid-modified PMO-supported transition metal acetylacetonate as effective cooperative catalysts. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:83247-83261. [PMID: 35761139 DOI: 10.1007/s11356-022-21630-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/03/2022] [Accepted: 06/19/2022] [Indexed: 06/15/2023]
Abstract
Efficient and sustainable chemical fixation of CO2 into value-added chemicals is one of the most promising objectives in environmental chemistry. In this work, transition metal acetylacetonate immobilized onto triazolium ionic liquid-modified periodic mesoporous organosilica PMO-IL-M(x) was successfully prepared and investigated as an effective and heterogeneous catalyst in the direct carboxylation of terminal alkynes and CO2 to the desired alkynyl carboxylic acids. It was found that the catalyst PMO-IL-Sn(0.3) exhibited extraordinary catalytic performance in terms of excellent activity, stability, productivity, and excellent yields under mild reaction conditions. Moreover, the catalyst PMO-IL-Sn(0.3) could be easily recovered and reused at least six times without considerable loss in catalytic activity. This work provides a sustainable and efficient synergistic strategy for the chemical fixation of carbon dioxide into valuable alkynyl carboxylic acids.
Collapse
|
16
|
The EU chemicals strategy for sustainability: an opportunity to develop new approaches for hazard and risk assessment. Arch Toxicol 2022; 96:2381-2386. [PMID: 35543751 PMCID: PMC9217765 DOI: 10.1007/s00204-022-03313-2] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
17
|
Thermite reaction driven pyrotechnic formulation with promising functional performance and reduced emissions. JOURNAL OF HAZARDOUS MATERIALS 2022; 424:127345. [PMID: 34879506 DOI: 10.1016/j.jhazmat.2021.127345] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/28/2021] [Revised: 09/20/2021] [Accepted: 09/23/2021] [Indexed: 06/13/2023]
Abstract
Green pyrotechnics/firecrackers reported herein are driven by thermite reactions for self-contained and self-sustained exothermic chemical reactions to make heat and sound by the usage of minimal fuel (aluminum), oxidizer (potassium nitrate), and Sulfur. These firecrackers have the potential for generating less emissions (70%) compared to commercial firecracker-based counterparts due to the presence of additives and are therefore designated as "Green firecrackers" or reduced emissions firecrackers. The functional performance and long-term stability of the composition was investigated through sound measurement and different tests, including ageing, thermal stability, and moisture test. The thermodynamics of the facilitated thermite reaction was cross-checked with experimental and theoretical methods. Prevalent mechanism for a substantial reduction in emissions to the tune of about 70% has been discussed. Cost of the green firecrackers is at par with the commercial firecrackers as cost of raw materials being used to prepare the formulation is comparable to the relatively toxic oxidizer substituted. "Green firecrackers" developed and reported here are environmentally benign in nature with higher business potential as far as a green chemistry-based sustainable solution for the society is required.
Collapse
|
18
|
Water extract of red mud: an efficient and renewable medium for environmentally benign synthesis of 2-amino-4H-chromenes. Mol Divers 2022; 26:2907-2914. [PMID: 35066778 DOI: 10.1007/s11030-021-10369-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2021] [Accepted: 12/13/2021] [Indexed: 01/11/2023]
Abstract
In this study, an efficient and convenient domino Michael addition/intramolecular cyclization protocol is presented for the synthesis of biologically relevant 2-amino-4H-chromenes in short reaction times using water extract of red mud (WERM) at room temperature. Red mud is generated abundantly as wastes in aluminum industries and this is the first report to utilize WERM as an effective and renewable medium in organic synthesis. As the precursor material is a waste, the present method is environmentally benign and economical. The final 2-amino-4H-chromenes were obtained in high yields by simple precipitation and subsequent washing by aqueous ethanol which eliminates the chromatographic separation. The present method is tolerated by electronically diverse functional groups and also applicable for large-scale synthesis. Moreover, WERM was recovered from the reaction medium and reused for several cycles without significant loss of reactivity.
Collapse
|
19
|
The liquid phase of 4,4'-trimethylenedipiperidine: a safe and greener dual-task agent for clean and facile synthesis of coumarin derivatives. Mol Divers 2022; 26:3047-3055. [PMID: 34982359 DOI: 10.1007/s11030-021-10364-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2021] [Accepted: 12/09/2021] [Indexed: 10/19/2022]
Abstract
A practical and facile synthesis of various coumarin derivatives was conducted using a liquid phase of 4,4'-trimethylenedipiperidine as a safe and greener dual-task reagent under catalyst-free and solvent-free conditions. This reagent is a commercially available solid and can be handled easily, having a liquid phase over a vast temperature range, high thermal stability, low toxicity, and good solubility in green solvents such as water and ethanol. It is worth mentioning that 4,4'-trimethylenedipiperidine could be completely recovered and regenerated after a simple process. The current method has other merits, including (a) minimizing the use of high-risk and toxic reagents and solvents; (b) the use of a secure and recoverable medium-organocatalyst instead of metal-based catalysts, (c) avoid tedious processes, harsh conditions, and a multi-step process for the preparation of catalysts, (d) transform phenol and salicyladehyde derivatives into the corresponding coumarin derivatives in good to high yields, (e) minimize hazardous waste generation. TMDP could be easily recovered and reused several times with no change in its activity. Furthermore, the current work demonstrated that the liquid phase of 4,4'-trimethylenedipiperidine can be a promising medium in organic reaction at higher temperatures due to its broad liquid range temperature, thermal stability, acceptor/donor hydrogen bond property, and other unique merits. New methodology for the synthesis of coumarines using liquid phase of TMDP under mild conditions.
Collapse
|
20
|
Gold modification by reduction of a diazonium salt prepared from an aliphatic diamine: a new useful means to remove hazardous substances. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2022; 29:1239-1245. [PMID: 34350575 DOI: 10.1007/s11356-021-15696-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2021] [Accepted: 07/23/2021] [Indexed: 06/13/2023]
Abstract
We studied the electrochemical reduction based on gold electrode of a diazonium salt prepared from ethylenediamine. This is the first time where the covalent functionalization on the gold electrode of an alkyldiazonium salt, 2-aminoethane-1-diazonium chloride, is demonstrated. This step requires the preparation beforehand by diazotization of one amine group from ethylenediamine. The resulting electrodeposited ethylamine film was confirmed by spectroscopic characterizations from gold surface modification monitored by electrochemical quartz crystal microbalance (EQCM) coupled to cyclic voltammetry (CV). The development of chemosensors based on such a covalent functionalization of a metal can reduce the chemical threats to human health along with drastically removing contaminants according to the green chemistry principles.
Collapse
|
21
|
Room temperature dissolving cellulose with a metal salt hydrate-based deep eutectic solvent. Carbohydr Polym 2021; 272:118473. [PMID: 34420732 DOI: 10.1016/j.carbpol.2021.118473] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/20/2021] [Revised: 07/19/2021] [Accepted: 07/19/2021] [Indexed: 12/17/2022]
Abstract
Abundant and renewable cellulose is a potential candidate for petroleum-derived synthetic polymers. However, the efficient dissolution of this material is problematic because of the high cost, severe reaction condition (e.g., high temperature) and environmentally unfriendly (e.g., toxic reagents, and solvent recyclability). Herein, to realize the room temperature dissolution of cellulose with an inexpensive and eco-friendly solvent, we design a novel low-cost deep eutectic solvent that is composed of zinc chloride, water and phosphoric acid for the efficient dissolution of cellulose. This solvent is featured as having both the superior hydrogen bonding acidity and the hydrogen bonding basicity, and thus can act as a hydrogen bond molecular scissors to cleave the hydrogen bonds within cellulose. In this process, microcrystalline cellulose can be easily dissolved in the solvent at room temperature with a dissolution ratio up to 15 wt%. The dissolved cellulose can also be recovered without any derivatization. The universality, recyclability and pilot production of dissolving cellulose using this solvent are also demonstrated. This work provides a new strategy for the design of novel deep eutectic solvent capable of disrupting the hydrogen bonds of cellulose under mild conditions.
Collapse
|
22
|
Sustainable catalyst-free N-formylation using CO2 as a carbon source. Curr Org Synth 2021; 19:187-196. [PMID: 34719366 DOI: 10.2174/1570179418666211022160149] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2021] [Revised: 09/03/2021] [Accepted: 09/09/2021] [Indexed: 11/22/2022]
Abstract
The development of new sustainable catalytic conversion methods of carbon dioxide (CO2) is of great interest in the synthesis of valuable chemicals. N-formylation of CO2 with amine nucleophiles as substrates has been studied in depth. The key to benign formylation is to select a suitable reducing agent to activate CO2. This paper showcases the activation modes of CO2 and the construction strategies of sustainable and catalyst-free N-formylation systems. The research progress of catalyst-free N-formylation of amines and CO2 is reviewed. There are two broad prominent categories, namely reductive amidation of CO2 facilitated by organic solvents and ionic liquids in the presence of hydrosilane. Attention is also paid to discussing the involved reaction mechanism with practical applications and identifying the remaining challenges in this field.
Collapse
|
23
|
Recent advances in continuous flow synthesis of heterocycles. Mol Divers 2021; 26:2939-2948. [PMID: 34661798 DOI: 10.1007/s11030-021-10338-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2021] [Accepted: 10/06/2021] [Indexed: 12/16/2022]
Abstract
In the current scenario, flow chemistry is emerging as a significant technology in the field of organic synthesis. This miniaturized protocol including microreactors facilitates excellent heat transfer, low solvent wastage, lesser reaction time, a safer environment for reagent handling and appreciable yields of desired products. Thus, this "enabling technology" has a great scope in the synthesis and preparation of a variety of heterocycles that require toxic reagents as starting materials. This review discusses the recent advances (2020-2021) in continuous flow strategy for synthesis and derivatization of variety of heterocyclic entities, of different ring size, using different approaches. This also highlights the advantages of different combined techniques like Microwave assisted heating, electrochemical flow cell, LED light source, NMR and FT-IR analysis, etc., that enables utilization of various mechanisms and real-time monitoring of reactions leading to improved results.
Collapse
|
24
|
Screening of simple carbohydrates as a renewable organocatalyst for the efficient construction of 1,3-benzoxazine scaffold. Carbohydr Res 2021; 510:108458. [PMID: 34634551 DOI: 10.1016/j.carres.2021.108458] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/14/2021] [Revised: 10/03/2021] [Accepted: 10/05/2021] [Indexed: 11/25/2022]
Abstract
A convenient protocol for the two component preparation of 1,3-benzoxazines by using several protected and unprotected carbohydrate molecules as organocatalysts have been developed which is broadly applicable to condensation reaction between variety of Mannich bases and paraformaldehyde. This study revealed that fructose have much higher catalytic activity than the other carbohydrates and can be an alternative to metal-containing catalysts as a green renewable organocatalyst for efficient and rapid construction of 1,3-benzoxazine skeleton. In this context, 21 benzoxazine compounds were successfully synthesized and spectral characterizations of these compounds were carried out by spectroscopic methods and elemental analysis. Furthermore, density functional theory (DFT) calculations have been performed to study the detailed mechanism of organocatalyst assisted synthesis of the benzoxazine monomers. The results obtained from these calculations showed that the more realistic reaction pathway involves formation of a phenolate based intermediate which loses a water molecule to form benzenaminium ion. Subsequently, this ion provides the formation of the corresponding benzoxazines with good yields through the intramolecular ring closure step.
Collapse
|
25
|
Applications of Norrish type I and II reactions in the total synthesis of natural products: a review. Photochem Photobiol Sci 2021; 20:1357-1378. [PMID: 34537894 DOI: 10.1007/s43630-021-00100-3] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2021] [Accepted: 09/06/2021] [Indexed: 01/12/2023]
Abstract
Natural products and their analogue have played a key role in the drug discovery and development process. In the laboratory, the total synthesis of secondary metabolites is very useful in ascertaining the hypothetical complex structure of molecules of natural origin. Total synthesis of natural products using Norrish type I and II reactions as a crucial step has been explored in this overview. Norrish reactions are important photo-induced transformations of carbonyl compounds in organic synthetic chemistry and are connected in numerous industrially and biologically relevant procedures and the processing of carbonyl compounds in the atmosphere. The present review tries to focus on the brilliant applications of Norrish type I and II photochemical reactions as a key step in the total synthesis of natural products and highlights on natural sources, structures, and biological activities of the promising natural products for the first time elegantly.
Collapse
|
26
|
Applications of ultrasound in total synthesis of bioactive natural products: A promising green tool. ULTRASONICS SONOCHEMISTRY 2021; 77:105665. [PMID: 34298310 PMCID: PMC8322467 DOI: 10.1016/j.ultsonch.2021.105665] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/03/2020] [Revised: 07/03/2021] [Accepted: 07/05/2021] [Indexed: 05/04/2023]
Abstract
Total synthesisis frequently compared to climbing as it provides a suitable route to reach a high point from the floor, the complex natural product from simple and commercially available materials. The total synthesis has a privileged position of trust in confirming the hypothetical complex structures of natural products despite sophisticated analytical and spectroscopic instrumentation and techniques that are available presently. Moreover, total synthesis is also useful to prepare rare bioactive natural products in the laboratory as several bioactive secondary metabolites are obtained in small quantities from natural sources. The artistic aspect of the total synthesis of bioactive natural products continues to be praised today as it may provide environmental protection through the concept of green or clean chemistry. The use of ultrasound waves as a non-polluting source of energy is of great interest in the field of sustainable and pharmaceutical chemistry as it differs from conventional energy sources in terms of reaction rates, yields, selectivities, and purity of the products. The present review highlights the application of ultrasound as a green tool in the total synthesis of bioactive natural products as well as this article is also aimed to offer an overview of natural sources, structures, and biological activities of the promising natural products for the first time from 2005 to 2020 elegantly.
Collapse
|
27
|
Renewable polymers and plastics: Performance beyond the green. N Biotechnol 2020; 60:146-158. [PMID: 33068793 DOI: 10.1016/j.nbt.2020.10.003] [Citation(s) in RCA: 56] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2020] [Revised: 10/01/2020] [Accepted: 10/03/2020] [Indexed: 12/18/2022]
Abstract
Renewable bio-based polymers are one of the effective answers that the bioeconomy offers to solve the environmental emergency connected to plastics and more specifically fossil-based plastics. Previous studies have shown that more than 70 % of the natural capital cost associated with plastic derives from the extraction and processing of fossil raw materials and that the price of fossil plastic would be on average 44 % higher if such impact was fully paid by businesses. The disclosure of the hidden costs of plastics will contribute to dispelling the myth of the expensiveness of renewable polymers. Nevertheless, the adoption of bio-based plastics in the market must be motivated by their functional properties and not merely by their green credentials. This article highlights some successful examples of synergies between chemistry and biotechnology in achieving a new generation of bio-based monomers and polymers. Their success is justified by the combination of scientific advances with positive environmental and social fallouts.
Collapse
|
28
|
Recent development in the synthesis of heterocycles by 2-naphthol-based multicomponent reactions. Mol Divers 2020; 25:1211-1245. [PMID: 32206945 DOI: 10.1007/s11030-020-10076-4] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/30/2019] [Accepted: 03/16/2020] [Indexed: 11/27/2022]
Abstract
2-Naphthol or β-naphthol is an important starting material that has drawn great attention in various organic transformations because of its attributes, such as low cost, easy to handle and eco-friendliness. The electron-rich aromatic framework of 2-naphthol with multiple reactive sites allows it to be utilized in several kinds of organic reactions eventuated to several organic molecules with potent biological properties. Multicomponent reaction approach has been tremendously utilized to explore the synthetic utility of 2-naphthol for the construction of diverse N/O-containing heterocyclic framework. In this review, we summarize recent data pertaining to multicomponent reactions, wherein heterocyclic compounds are synthesized utilizing 2-naphthol as one of the starting materials. It is anticipated that this review will stimulate the researchers to design new multicomponent strategies complying with the Green Chemistry principles for the further exploitation of 2-naphthol for the rapid synthesis of versatile biologically relevant heterocycles. This review provides a concise overview of the different 2-naphthol based multicomponent reactions utilized for the construction of diverse bioactive heterocyclic scaffold.
Collapse
|
29
|
Influence of the Ionic Liquid on the Activity of a Supported Ionic Liquid Phase Fe II Pincer Catalyst for the Hydrogenation of Aldehydes. Eur J Inorg Chem 2019; 2019:3503-3510. [PMID: 31588182 PMCID: PMC6771636 DOI: 10.1002/ejic.201900636] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/04/2019] [Indexed: 11/11/2022]
Abstract
The catalytic hydrogenation of different aldehydes to the corresponding alcohols was investigated using an FeII hydride pincer complex as catalyst in the supported ionic liquid phase (SILP) reaction mode. Two different ionic liquids of the type [X4441][NTf2] with X=N or P were applied with mesoporous silica gel as support, which was coated first with a chemisorbed monolayer of the corresponding modified IL to remove acidic surface OH‐groups and to prevent IL leaching. Quantitative conversion with turn‐over frequencies in the order of 1000 h–1 were obtained for various aromatic and heteroaromatic aldehydes and highly selective aldehyde reduction was observed also for substrates containing reducible C=C bonds. Aldehydes with longer aliphatic chains or cycloalkyl substituents, however, showed no conversion here, in contrast to a previous study with an imidazolium‐based ionic liquid. These differences were ascribed primarily to differences in substrate/ionic liquid interactions. Whereas [N4441][NTf2] and [P4441][NTf2] gave essentially identical results for different substrates in single‐batch reactions, prolonged use of the catalyst in repeated reaction cycles lead to a quick drop‐off in catalyst activity in [P4441][NTf2], but a continuous, quantitative conversion in [N4441][NTf2].
Collapse
|
30
|
Reducing aquatic micropollutants - Increasing the focus on input prevention and integrated emission management. THE SCIENCE OF THE TOTAL ENVIRONMENT 2019; 652:836-850. [PMID: 30380490 DOI: 10.1016/j.scitotenv.2018.10.219] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/24/2016] [Revised: 10/15/2018] [Accepted: 10/15/2018] [Indexed: 06/08/2023]
Abstract
Pharmaceuticals and many other chemicals are an important basis for nearly all sectors including for example, food and agriculture, medicine, plastics, electronics, transport, communication, and many other products used nowadays. This comes along with a tremendous chemicalization of the globe, including ubiquitous presence of products of chemical and pharmaceutical industries in the aquatic environment. Use of these products will increase with population growth and living standard as will the need for clean water. In addition, climate change will exacerbate availability of water in sufficient quantity and quality. Since its implementation, conventional wastewater treatment has increasingly contributed to environmental protection and health of humans. However, with the increasing pollution of water by chemicals, conventional treatment turned out to be insufficient. It was also found that advanced effluent treatment methods such as extended filtration, the sorption to activated charcoal or advanced oxidation methods have their own limitations. These are, for example, increased demand for energy and hazardous chemicals, incomplete or even no removal of pollutants, the generation of unwanted products from parent compounds (transformation products, TPs) of often-unknown chemical structure, fate and toxicity. In many countries, effluent treatment is available only rarely if at all let alone advanced treatment. The past should teach us, that focusing only on technological approaches is not constructive for a sustainable water quality control. Therefore, in addition to conventional and advanced treatment optimization more emphasis on input prevention is urgently needed, including more and better control of what is present in the source water. Measures for input prevention are known for long. The main focus though has always been on the treatment, and measures taken at the source have gained only little attention so far. A more effective and efficient approach, however, would be to avoid pollution at the source, which would in turn allow more targeted treatment to meet treated water quality objectives globally. New developments within green and sustainable chemistry are offering new approaches that allow for input prevention and a more targeted treatment to succeed in pollution elimination in and at the source. To put this into practice, engineers, water scientists and chemists as well as microbiologists and scientists of other related disciplines need to cooperate more extensively than in the past. Applying principles such as the precautionary principle, or keeping water flows separate where possible will add to this. This implies not minimizing the efforts to improve wastewater treatment but to design effluents and chemicals in such a way that treatment systems and water environments can cope successfully with the challenge of micropollutants globally (Kümmerer et al., 2018). This paper therefore presents in its first part some of the limitations of effluent treatment in order to demonstrate the urgent need for minimizing water pollution at the source and, information on why source management is urgently needed to improve water quality and stimulate discussions how to protect water resources on a global level. Some principles of green and sustainable chemistry as well as other approaches, which are part of source management, are presented in the second part in order to stimulate discussion.
Collapse
|
31
|
Impact of European chemicals regulation on the industrial use of plasticizers and patterns of substitution in Scandinavia. ENVIRONMENT INTERNATIONAL 2018; 119:346-352. [PMID: 29990955 DOI: 10.1016/j.envint.2018.06.037] [Citation(s) in RCA: 21] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/02/2018] [Revised: 06/26/2018] [Accepted: 06/26/2018] [Indexed: 05/07/2023]
Abstract
REACH aims at promoting the safe use of chemicals in Europe, inter alia by identification and regulation of substances of very high concern (SVHCs). Once identified, SVHCs need to be substituted by safer alternatives. However, substitutes are frequently not safer than the substances that they replace but rather show similar hazard profiles, resulting in regrettable substitution. This paper investigates the impact of chemicals regulation on substitution of chemicals by analyzing time trends in the industrial use of chemicals from 2000 to 2014 in Scandinavia. It is shown that the use of ten water-relevant SVHCs decreased by about 90% in the considered period in Sweden as compared to a control group of unregulated substances which decreased by only 20%. A closer inspection of the use of 23 highly used plasticizers revealed that the use of regulated phthalate plasticizers decreased while the use of non-phthalate plasticizers increased. A first comparison of hazardous properties showed that during the 15-years period chemical substitution drastically reduced the chemical hazard burden of plasticizers in Scandinavia for both, the environment and human health. This study shows that regulation and the related discussion on chemicals safety have significantly reduced the chemical hazard burden from plasticizers in Scandinavia since the year 2000. It is assumed that similar trends can be found for the whole European Union. To combat regrettable substitution, mitigation options are suggested, including information-based tools for the identification of safer alternatives and an improved accessibility of information on production volumes and uses of chemicals to allow for an improved assessment of chemical's risk.
Collapse
|
32
|
Green Chemistry and Its Contribution to Industrial Biotechnology. ADVANCES IN BIOCHEMICAL ENGINEERING/BIOTECHNOLOGY 2018; 173:281-298. [PMID: 30270411 DOI: 10.1007/10_2018_73] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Sustainable chemistry is a broad framework that starts with the function that a chemical product is offering. Not only chemical but also economic and ethical aspects come into focus throughout the complete lifecycle of chemical products. Green chemistry is an important building block for sustainable chemistry and addresses the issue of greener synthesis and, to a certain degree, the more benign properties of chemicals. The principles of green chemistry clearly aim at making chemical reactions and processes more environmentally friendly. Aspects such as atom efficiency, energy efficiency, harmless reactants, renewable resources, and pollution prevention are considered. Despite the progress made toward a "greener" chemistry, biotechnological processes, as processes for the conversion of biomass into value-added products, have not been properly adapted to new developments. Processes used in industrial biotechnology are predominantly linear. This review elaborates on the potential contributions of green chemistry to industrial biotechnology and vice versa. Examples are presented of how green chemistry and biotechnology can be connected to make substrate supply, upstream and downstream processing, and product formation more sustainable. The chapter ends with a case study of adipic acid production from lignin to illustrate the importance of a strong connection between green chemistry and biotechnology.
Collapse
|
33
|
Easily fabricated and recyclable Pd&Cu@Al catalyst for gram-scale phosphine-free Heck reactions with high TON. Sci Bull (Beijing) 2017; 62:1325-1330. [PMID: 36659294 DOI: 10.1016/j.scib.2017.09.016] [Citation(s) in RCA: 39] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/08/2017] [Revised: 09/06/2017] [Accepted: 09/08/2017] [Indexed: 01/21/2023]
Abstract
A unique Pd&Cu@Al catalyst was easily fabricated just by immersing commercial aluminum foil in a mixed xylene solution of PdCl2 and CuCl2. The catalyst fabrication process led to aluminum oxide coatings in situ, which supported the metal nanoparticles and enhanced their catalytic activities for the phosphine-free Heck reaction of aryl halides and styrenes with high turnover number (TON) up to 3.9×105. The reaction can be scaled up to at least 100mmol and has been applied in modification of drug Lapatinib's intermediate with low metal residue. This novel catalyst is of good application potential in industrial production because it was extremely easy to be recycled, in regardless of the generation of the insoluble impurities or tars during the reaction processes.
Collapse
|
34
|
Recent developments on ultrasound assisted catalyst-free organic synthesis. ULTRASONICS SONOCHEMISTRY 2017; 35:1-14. [PMID: 27771266 DOI: 10.1016/j.ultsonch.2016.09.023] [Citation(s) in RCA: 96] [Impact Index Per Article: 13.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2016] [Revised: 09/23/2016] [Accepted: 09/27/2016] [Indexed: 05/04/2023]
Abstract
Mother Nature needs to be protected from ever increasing chemical pollutions associated with synthetic organic processes. The fundamental challenge for today's methodologists is to make their protocols more environmentally benign and sustainable by avoiding the extensive use of hazardous reagents and solvents, harsh reaction conditions, and toxic metal catalysts. However, the people of the twenty-first century are well aware about the side effects of those hazardous substances used and generated by the chemical processes. As a result, the last decade has seen a tremendous outburst in modifying chemical processes to make them 'sustainable' for the betterment of our environment. Catalysts play a crucial role in organic synthesis and thus they find huge applications and uses. Scientists' continuously trying to modify the catalysts to reduce their toxicity level, but the most benign way is to design an organic reaction without catalyst(s), if possible. It is worthy to mention that the involvement of ultrasound in organic synthesis is sometimes fulfilling this goal. In many occasions the applications of ultrasound can avoid the use of catalysts in organic reactions. Such beneficial features as a whole have motivated the organic chemists to apply ultrasonic irradiation in more heights and as a results, in recent past, there were immense applications of ultrasound in organic reactions for the synthesis of diverse organic scaffolds under catalyst-free condition. The present review summarizes the latest developments on ultrasound assisted catalyst-free organic synthesis reported so far.
Collapse
|
35
|
Avoid the PCB mistakes: A more sustainable future for ionic liquids. JOURNAL OF HAZARDOUS MATERIALS 2017; 324:773-780. [PMID: 27899239 DOI: 10.1016/j.jhazmat.2016.11.060] [Citation(s) in RCA: 27] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/21/2016] [Revised: 11/03/2016] [Accepted: 11/21/2016] [Indexed: 06/06/2023]
Abstract
Based on our original knowledge and experience on both polychlorinated biphenyls (PCBs) identification in aquatic ecosystems, and use of ionic liquids (ILs) as solvents and/or co-catalysts in green chemistry, we drawn a dared comparison between these two families. Indeed, PCBs has been used during several decades for their new properties, but are now considered as prevalent and persistent pollutants; some toxic effects on environment or human are still revealed. ILs, often designated as "green solvents" are increasingly used in numerous applications, but few studies reported about their environmental impact are still controversial. Through a parallel between properties and applications of PCBs and ILs, we wondered if history could not repeat itself, and how to provide a better future for ILs. Here, we provide some interesting comparisons and we discuss which tracks it could be important to follow for ILs applications in order to avoid the errors done with PCBs.
Collapse
|
36
|
Abstract
Concepts such as biorefinery and green chemistry focus on the usage of biomass, as with the oil value chain. However, it can cause less negative impact on the environment. A biorefinery based on sugarcane (Saccharum spp.) as feedstock is an example, because it can integrate into the same physical space, of processes for obtaining biofuels (ethanol), chemicals (from sugars or ethanol), electricity, and heat.The use of sugarcane as feedstock for biorefineries is dictated by its potential to supply sugars, ethanol, natural polymers or macromolecules, organic matter, and other compounds and materials. By means of conversion processes (chemical, biochemical, and thermochemical), sugarcane biomass can be transformed into high-value bioproducts to replace petrochemicals, as a bioeconomy model.
Collapse
|
37
|
Abstract
Over the past 15 years, sustainable chemistry has emerged as a new paradigm in the development of chemistry. In the field of organic synthesis, green chemistry rhymes with relevant choice of starting materials, atom economy, methodologies that minimize the number of chemical steps, appropriate use of benign solvents and reagents, efficient strategies for product isolation and purification and energy minimization. In that context, unconventional methods, and especially ultrasound, can be a fine addition towards achieving these green requirements. Undoubtedly, sonochemistry is considered as being one of the most promising green chemical methods (Cravotto et al. Catal Commun 63: 2-9, 2015). This review is devoted to the most striking results obtained in green organic sonochemistry between 2006 and 2016. Furthermore, among catalytic transformations, oxidation reactions are the most polluting reactions in the chemical industry; thus, we have focused a part of our review on the very promising catalytic activity of ultrasound for oxidative purposes.
Collapse
|
38
|
Possible underestimations of risks for the environment due to unregulated emissions of biocides from households to wastewater. ENVIRONMENT INTERNATIONAL 2016; 94:695-705. [PMID: 27448707 DOI: 10.1016/j.envint.2016.07.007] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2016] [Revised: 07/08/2016] [Accepted: 07/08/2016] [Indexed: 05/23/2023]
Abstract
The aim of this study was to investigate the role of household products as possible sources of biocidal active substances in municipal wastewater and their regulation under the Biocidal Products Regulation (EU) 528/2012. In 131 households, we investigated the prevalence of products used to control pests, washing and cleaning agents and select personal care products with high release to wastewater. Inventories of these products were established with the help of barcode scanning. All uses of biocidal active substances were evaluated regarding their assessment under the Biocidal Products Regulation. 2963 products were scanned in total, with 48% being washing and cleaning agents, 43% personal care products and 9% products used to control pests. Biocidal active substances were found in each household. These were observed primarily in washing and cleaning agents and personal care products (90%), while only a small percentage of the observations of biocidal active substances was in biocidal products. 64% of the observations of biocidal active substances were in applications that do not fall under the Biocidal Products Regulation and are thus not subject to its environmental risk assessment. This study shows clearly that risks for the environment are underestimated because unregulated emissions to wastewater occur. It demonstrates that there are gaps in the current chemical legislation that lead to a release of substances into wastewater that were not subject to environmental risk assessment under the Biocidal Products Regulation. This is one example of the limitations of scientific risk assessment of chemicals - its complexity is immense. From our point of view, the results underline the importance of a sustainable use of the substances as this is the only way to decrease yet unidentified risks.
Collapse
|
39
|
Evaluation of the California Safer Consumer Products Regulation and the impact on consumers and product manufacturers. Regul Toxicol Pharmacol 2013; 68:23-40. [PMID: 24231524 DOI: 10.1016/j.yrtph.2013.11.001] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2013] [Revised: 10/28/2013] [Accepted: 11/01/2013] [Indexed: 12/29/2022]
Abstract
Chemistry enables more than 95% of products in the marketplace. Over the past 20 years, various entities began to generate inventories of chemicals ("chemical watch lists") potentially associated with human or environmental health risks. Some lists included thousands of chemicals, while others listed only a few chemistries with limited properties or toxicological endpoints (e.g., neurotoxicants). Enacted on October 1, 2013, the California Safer Consumer Products Regulation (SCP) utilized data from chemical inventory lists to create one master list. This paper aims to discuss the background and requirements of this regulation. Additionally, we wanted to understand the universe of Candidate Chemicals identified by the Regulation. Data from all 23 chemical lists identified in the SCP Regulation were entered into a database. The most prevalent chemicals among the ∼2900 chemicals are identified, including the most prevalent chemical, lead, appearing on 65% of lists, followed by DEHP (52%), perchloroethylene (48%), and benzene (48%). Our results indicated that the most prevalent Candidate Chemicals were either persistent, bioaccumulative, carcinogenic, or reprotoxic. This regulation will have wide-ranging impact in California and throughout the global supply chain, which is highlighted through selected examples and case studies.
Collapse
|