Non-pharmaceutical interventions during the COVID-19 epidemic changed detection rates of other circulating respiratory pathogens in Japan

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has circulated worldwide and causes coronavirus disease 2019 (COVID-19). At the onset of the COVID-19 pandemic, infection control measures were taken, such as hand washing, mask wearing, and behavioral restrictions. However, it is not fully clear how the effects of these non-pharmaceutical interventions changed the prevalence of other pathogens associated with respiratory infections. In this study, we collected 3,508 nasopharyngeal swab samples from 3,249 patients who visited the Yamanashi Central Hospital in Japan from March 1, 2020 to February 28, 2021. We performed multiplex polymerase chain reaction (PCR) using the FilmArray Respiratory Panel and singleplex quantitative reverse transcription PCR targeting SARS-CoV-2 to detect respiratory disease-associated pathogens. At least one pathogen was detected in 246 (7.0%) of the 3,508 samples. Eleven types of pathogens were detected in the samples collected from March-May 2020, during which non-pharmaceutical interventions were not well implemented. In contrast, after non-pharmaceutical interventions were thoroughly implemented, only five types of pathogens were detected, and the majority were SARS-CoV-2, adenoviruses, or human rhinoviruses / enteroviruses. The 0-9 year age group had a higher prevalence of infection with adenoviruses and human rhinoviruses / enteroviruses compared with those 10 years and older, while those 10 years and older had a higher prevalence of infection with SARS-CoV-2 and other pathogens. These results indicated that non-pharmaceutical interventions likely reduced the diversity of circulating pathogens. Moreover, differences in the prevalence of pathogens were observed among the different age groups.

Healthcare institutions' recommendation regarding the use of FFP-2 masks and SARS-CoV-2 seropositivity among healthcare workers: a multicenter longitudinal cohort study

BACKGROUND

Health care workers (HCW) are heavily exposed to SARS-CoV-2 from the beginning of the pandemic. We aimed to analyze risk factors for SARS-CoV-2 seroconversion among HCW with a special emphasis on the respective healthcare institutions' recommendation regarding the use of FFP-2 masks.

METHODS

We recruited HCW from 13 health care institutions (HCI) with different mask policies (type IIR surgical face masks vs. FFP-2 masks) in Southeastern Switzerland (canton of Grisons). Sera of participants were analyzed for the presence of SARS-CoV-2 antibodies 6 months apart, after the first and during the second pandemic wave using an electro-chemiluminescence immunoassay (ECLIA, Roche Diagnostics). We captured risk factors for SARS-CoV-2 infection by using an online questionnaire at both time points. The effects of individual COVID-19 exposure, regional incidence and FFP-2 mask policy on the probability of seroconversion were evaluated with univariable and multivariable logistic regression.

RESULTS

SARS-CoV-2 antibodies were detected in 99 of 2794 (3.5%) HCW at baseline and in 376 of 2315 (16.2%) participants 6 months later. In multivariable analyses the strongest association for seroconversion was exposure to a household member with known COVID-19 (aOR: 19.82, 95% CI 8.11-48.43, p < 0.001 at baseline and aOR: 8.68, 95% CI 6.13-12.29, p < 0.001 at follow-up). Significant occupational risk factors at baseline included exposure to COVID-19 patients (aOR: 2.79, 95% CI 1.28-6.09, p = 0.010) and to SARS-CoV-2 infected co-workers (aOR: 2.50, 95% CI 1.52-4.12, p < 0.001). At follow up 6 months later, non-occupational exposure to SARS-CoV-2 infected individuals (aOR: 2.54, 95% CI 1.66-3.89 p < 0.001) and the local COVID-19 incidence of the corresponding HCI (aOR: 1.98, 95% CI 1.30-3.02, p = 0.001) were associated with seroconversion. The healthcare institutions' mask policy (surgical masks during usual exposure vs. general use of FFP-2 masks) did not affect seroconversion rates of HCW during the first and the second pandemic wave.

CONCLUSION

Contact with SARS-CoV-2 infected household members was the most important risk factor for seroconversion among HCW. The strongest occupational risk factor was exposure to COVID-19 patients. During this pandemic, with heavy non-occupational exposure to SARS-CoV-2, the mask policy of HCIs did not affect the seroconversion rate of HCWs.

A Statewide Voluntary Movement Addressing the Shortage of Medical Supplies During the COVID-19 Pandemic

During the COVID-19 pandemic, a shortage of personal protective equipment compromised efficient patient care and provider safety. Volunteers from many different backgrounds worked to meet these demands. Additive manufacturing, laser cutting, and alternative supply chains were used to produce, test, and deliver essential equipment for health care workers and first responders. Distributed equipment included ear guards, face shields, and masks. Contingent designs were created for powered air-purifying respirator hoods, filtered air pumps, intubation shields, and N95 masks.

Homemade facemasks: particle filtration, breathability, fit, and other performance characteristics

Homemade cloth masks and other improvised face coverings have become widespread during the COVID-19 pandemic driven by severe shortages of personal protective equipment. In this study, various alternative (mostly common household) materials, which have not traditionally been used in respiratory protective devices, were tested for particle filtration performance and breathability. Most of these materials were found of some-but rather limited-utility in facemasks. At a breathing flow rate of 30 L min-1, 17 out of 19 tested materials demonstrated collection efficiency below 50%; at 85 L min-1, only one material featured particle collection efficiency above 50%. Pressure drop values were mostly below 4 mm w.g. (observed in 89% of cases for the two flow rates), which provides comfortable breathing. Only for one fabric material (silk) tested at 85 L min-1 did the pressure drop reach 11 mm w.g. Based on these results, a three-layer facemask prototype was designed and fabricated comprised of the best performing materials. Additional tests were conducted to examine possible particle detachment/shedding from the materials used in the newly developed facemask, but no such phenomenon was observed. The prototype was evaluated on 10 human subjects using the standard OSHA-approved quantitative fit testing protocol. The mask protection level, determined as an adopted fit factor, was found to lie between that of the two commercial surgical/medical masks tested for comparison. A 10-cycle washing of the mask prototype lowered its collection efficiency across the particle size range; however, washing did not substantially affect mask breathability. The study revealed that although homemade masks offer a certain level of protection to a wearer, one should not expect them to provide the same respiratory protection as high-end commercial surgical/medical masks or-by any means-NIOSH-certified N95 filtering facepieces.

Not far enough: Public health policies to combat COVID-19 in Mexico's states

BACKGROUND

Mexican state governments' actions are essential to control the COVID-19 pandemic within the country. However, the type, rigor and pace of implementation of public policies have varied considerably between states. Little is known about the subnational (state) variation policy response to the COVID-19 pandemic in Mexico.

MATERIAL AND METHODS

We collected daily information on public policies designed to inform the public, as well as to promote distancing, and mask use. The policies analyzed were: School Closure, Workplace Closure, Cancellation of Public Events, Restrictions on Gatherings, Stay at Home Order, Public Transit Suspensions, Information Campaigns, Internal Travel Controls, International Travel Controls, Use of Face Masks We use these data to create a composite index to evaluate the adoption of these policies in the 32 states. We then assess the timeliness and rigor of the policies across the country, from the date of the first case, February 27, 2020.

RESULTS

The national average in the index during the 143 days of the pandemic was 41.1 out of a possible 100 points on our index. Nuevo León achieved the highest performance (50.4); San Luis Potosí the lowest (34.1). The differential between the highest versus the lowest performance was 47.4%.

CONCLUSIONS

The study identifies variability and heterogeneity in how and when Mexican states implemented policies to contain COVID-19. We demonstrate the absence of a uniform national response and widely varying stringency of state responses. We also show how these responses are not based on testing and do not reflect the local burden of disease. National health system stewardship and a coordinated, timely, rigorous response to the pandemic did not occur in Mexico but is desirable to contain COVID-19.

The effect of the synchronized multi-dimensional policies on imported COVID-19 curtailment in China

As countries are lifting restrictions and resuming international travels, the rising risk of COVID-19 importation remains concerning, given that the SARS-CoV-2 virus could be transmitted unintentionally through the global transportation network. To explore and assess the effective strategies for curtailing the epidemic risk from international importation nationwide, we evaluated "the joint prevention and control" mechanism, which made up of 19 containment policies, on how it impacted the change of medical observation and detection time from border arrival to laboratory confirmation of COVID-19 in its burst in China. Based on 1,314 epidemiological-survey cases from February 29 to May 25, 2020, we found that the synchronized approach of implementing multi-dimensional interventional policies, such as a centralized quarantine and nucleic acid testing (NAT), flight service adjustment and border closure, effectively facilitate early identification of infected case. Specifically, the implementation of the international flight service reduction was found to be associated with a reduction of the mean intervals of diagnosis from arrival to lab-confirmation by 0.44 days maximally, and the border closure was associated with a reduction of the diagnosis interval of imported cases by 0.69 days, from arrival to laboratory confirmation. The study suggests that a timely and synchronized implementation of multi-dimensional policies is compelling in preventing domestic spreading from importation.

COVID-19 pandemic: A review of the global lockdown and its far-reaching effects

COVID-19, caused by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2), was declared a pandemic by the World Health Organization (WHO) on the 11th of March 2020, leading to some form of lockdown across almost all countries of the world. The extent of the global pandemic due to COVID-19 has a significant impact on our lives that must be studied carefully to combat it. This study highlights the impacts of the COVID-19 pandemic lockdown on crucial aspects of daily life globally, including; Food security, Global economy, Education, Tourism, hospitality, sports and leisure, Gender Relation, Domestic Violence/Abuse, Mental Health and Environmental air pollution through a systematic search of the literature. The COVID-19 global lockdown was initiated to stem the spread of the virus and 'flatten the curve' of the pandemic. However, the impact of the lockdown has had far-reaching effects in different strata of life, including; changes in the accessibility and structure of education delivery to students, food insecurity as a result of unavailability and fluctuation in prices, the depression of the global economy, increase in mental health challenges, wellbeing and quality of life amongst others. This review article highlights the impacts of the COVID-19 pandemic lockdown across the globe. As the global lockdown is being lifted in a phased manner in various countries of the world, it is necessary to explore its impacts to understand its consequences comprehensively. This will guide future decisions that will be made in a possible future wave of the COVID-19 pandemic or other global disease outbreak.

3D printing of face shields to meet the immediate need for PPE in an anesthesiology department during the COVID-19 pandemic

Background

Anesthesia providers are at risk for contracting COVID-19 due to close patient contact, especially during shortages of personal protective equipment. We present an easy to follow and detailed protocol for producing 3D printed face shields and an effective decontamination protocol, allowing their reuse.

Methods

The University of Nebraska Medical Center (UNMC) produced face shields using a combination of 3D printing and assembly with commonly available products, and produced a simple decontamination protocol to allow their reuse. To evaluate the effectiveness of the decontamination protocol, we inoculated bacterial suspensions of E. coli and S. aureus on to the face shield components, performed the decontamination procedure, and finally swabbed and enumerated organisms onto plates that were incubated for 12-24 hours. Decontamination effectiveness was evaluated using the average log10 reduction in colony counts.

Results

Approximately 112 face shields were constructed and made available for use in 72 hours. These methods were successfully implemented for in-house production at UNMC and at Tripler Army Medical Center (Honolulu, Hawaii). Overall, the decontamination protocol was highly effective against both E. coli and S. aureus, achieving a ≥4 log10 (99.99%) reduction in colony counts for every replicate from each component of the face shield unit.

Discussion

Face shields not only act as a barrier against the soiling of N95 face masks, they also serve as more effective eye protection from respiratory droplets over standard eye shields. Implementation of decontamination protocols successfully allowed face shield and N95 mask reuse, offering a higher level of protection for anesthesiology providers at the onset of the COVID-19 pandemic.

Conclusions

In a time of urgent need, our protocol enabled the rapid production of face shields by individuals with little to no 3D printing experience, and provided a simple and effective decontamination protocol allowing reuse of the face shields.

The Association between the Perceived Adequacy of Workplace Infection Control Procedures and Personal Protective Equipment with Mental Health Symptoms: A Cross-sectional Survey of Canadian Health-care Workers during the COVID-19 Pandemic: L'association entre le caractère adéquat perçu des procédures de contrôle des infections au travail et de l'équipement de protection personnel pour les symptômes de santé mentale. Un sondage transversal des travailleurs de la santé canadiens durant la pandémie COVID-19

OBJECTIVES

To examine the relationship between perceived adequacy of personal protective equipment (PPE) and workplace-based infection control procedures (ICP) and mental health symptoms among a sample of health-care workers in Canada within the context of the current COVID-19 pandemic.

METHODS

A convenience-based internet survey of health-care workers in Canada was facilitated through various labor organizations between April 7 and May 13, 2020. A total of 7,298 respondents started the survey, of which 5,988 reported information on the main exposures and outcomes. Anxiety symptoms were assessed using the Generalized Anxiety Disorder (GAD-2) screener, and depression symptoms using the Patient Health Questionnaire (PHQ-2) screener. We assessed the perceived need and adequacy of 8 types of PPE and 10 different ICP. Regression analyses examined the proportion of GAD-2 and PHQ-2 scores of 3 and higher across levels of PPE and ICP, adjusted for a range of demographic, occupation, workplace, and COVID-19-specific measures.

RESULTS

A total of 54.8% (95% confidence interval [CI], 53.5% to 56.1%) of the sample had GAD-2 scores of 3 and higher, and 42.3% (95% CI, 41.0% to 43.6%) of the sample had PHQ-2 scores of 3 and higher. Absolute differences of 18% (95% CI, 12% to 23%) and 17% (95% CI, 12% to 22%) were observed in the prevalence of GAD-2 scores of 3 and higher between workers whose perceived PPE needs and ICP needs were met compared to those who needs were not met. Differences of between 11% (95% CI, 6% to 17%) and 19% (95% CI, 14% to 24%) were observed in PHQ-2 scores of 3 and higher across these same PPE and ICP categories.

CONCLUSIONS

Our results suggest strengthening employer-based infection control strategies likely has important implications for the mental health symptoms among health-care workers in Canada.

Novel manufacturing of simple masks in response to international shortages: Bacterial and particulate filtration efficiency testing

Many healthcare systems have been forced to outsource simple mask production due to international shortages caused by the COVID-19 pandemic. Providence created simple masks using surgical wrap and submitted samples to an environmental lab for bacterial filtration efficiency testing. Bacterial filtration efficiency rates ranged from 83.0% to 98.1% depending on specific material and ply, and particular filtration efficiency rates ranged from 92.3% to 97.7%. Based on mask configuration, specific surgical wrap selected, and ply, the recommended filtration efficiency for isolation and surgical masks of 95% and 98%, respectively can be achieved. These alternative masks can allow for similar coverage and safety when hospital-grade isolation masks are in short supply.

Filtration Efficiency of Hospital Face Mask Alternatives Available for Use During the COVID-19 Pandemic

IMPORTANCE

Procuring respiratory protection for clinicians and other health care workers has become a major challenge of the coronavirus disease 2019 (COVID-19) pandemic and has resulted in nonstandard practices such as the use of expired respirators and various decontamination processes to prolong the useful life of respirators in health care settings. In addition, imported, non-National Institute for Occupational Safety and Health (NIOSH)-approved respirators have been donated or acquired by hospitals as a potential replacement for limited NIOSH-approved N95 respirators.

OBJECTIVE

To assess fitted filtration efficiencies (FFEs) for face mask alternatives used during the COVID-19 pandemic.

DESIGN, SETTING, AND PARTICIPANTS

For this quality-improvement study conducted between April and June 2020, we used the Occupational Safety and Health Administration's Quantitative Fit Testing Protocol for Filtering Facepiece Respirators in a laboratory atmosphere supplemented with sodium chloride particles to assess the FFEs of a variety of respirators worn by a male volunteer and female volunteer.

MAIN OUTCOMES AND MEASURES

The FFEs of respirators commonly worn by clinicians and other health care workers and available respirator alternatives during the COVID-19 pandemic.

RESULTS

Of the 29 different fitted face mask alternatives tested on 1 man and 1 woman, expired N95 respirators with intact elastic straps and respirators subjected to ethylene oxide and hydrogen peroxide sterilization had unchanged FFE (>95%). The performance of N95 respirators in the wrong size had slightly decreased performance (90%-95% FFE). All of the respirators not listed as approved in this evaluation (n = 6) failed to achieve 95% FFE. Neither of the 2 imported respirators authorized for use by the Centers for Disease Control and Prevention that were not NIOSH-approved tested in this study achieved 95% FFE, and the more effective of the 2 functioned at approximately 80% FFE. Surgical and procedural face masks had filtering performance that was lower relative to that of N95 respirators (98.5% overall FFE), with procedural face masks secured with elastic ear loops showing the lowest efficiency (38.1% overall FFE).

CONCLUSIONS AND RELEVANCE

This quality-improvement study evaluating 29 face mask alternatives for use by clinicians interacting with patients during the COVID-19 pandemic found that expired N95 respirators and sterilized, used N95 respirators can be used when new N95 respirators are not available. Other alternatives may provide less effective filtration.

Mask shortage during epidemics and pandemics: a scoping review of interventions to overcome limited supply

OBJECTIVE

To characterise published evidence regarding preclinical and clinical interventions to overcome mask shortages during epidemics and pandemics.

DESIGN

Systematic scoping review.

SETTINGS

All healthcare settings relevant to epidemics and pandemics.

SEARCH STRATEGY

English peer-reviewed studies published from January 1995 to June 2020 were included. Literature was identified using four databases (Medline-OVID, EMBASE, CINAHL, Cochrane Library), forwards-and-backwards searching through Scopus and an extensive grey literature search. Assessment of study eligibility, data extraction and evidence appraisal were performed in duplicate by two independent reviewers.

RESULTS

Of the 11 220 database citations, a total of 47 articles were included. These studies encompassed six broad categories of conservation strategies: decontamination, reusability of disposable masks and/or extended wear, layering, reusable respirators, non-traditional replacements or modifications and stockpiled masks. Promising strategies for mask conservation in the context of pandemics and epidemics include use of stockpiled masks, extended wear of disposable masks and decontamination.

CONCLUSION

There are promising strategies for overcoming face mask shortages during epidemics and pandemics. Further research specific to practical considerations is required before implementation during the COVID-19 pandemic.

Are surgical masks manufactured from sterilisation wrap safe?

Background

Due to regional shortages some health services have proposed using surgical masks manufactured from sterilisation wrap. However, there has been little assessment of the safety of this practice. Therefore, we developed our own prototypes and evaluated whether they met regulatory standards.

Methods

Surgical mask prototypes were manufactured from two thickness grades of commercial sterilisation wrap. Safety was assessed in the context of regulatory standards. As it was not previously reported, we developed and performed differential pressure and synthetic blood penetration resistance experiments in accordance with official methodology.

Results

Bacterial filtration efficiency was comparable between sterilisation wrap and commercial surgical masks. Both prototypes met regulatory standards for synthetic blood resistance, whilst only our thinner mask fulfilled acceptable differential pressure (‘breathability’) thresholds.

Conclusion

Acceptable barrier and breathability properties can be achieved with surgical masks produced from sterilisation wrap. Therefore, this may be a reasonable method to supplement stock if required. Unless there are shortages mandating alternatives, health-care workers should always use approved personal protective equipment.

COVID-19: through the eyes through the front line, an international perspective

COVID-19 is continuing to ravage the globe. In many Western Countries, the populous has not embraced public health advice which has resulted in a resurgence of the COVID-19 virus. In the United States, there is an absence of a coordinated Federal response. Instead, frontline workers and average citizens are having to cope with extensive mixed messaging regarding mask usage and social distancing from the highest levels of government. This has resulted in the United States not being able to achieve a low level of infection since the pandemic began. In addition, many citizens hold a profound belief that individual freedoms must be preserved, even at the expense of public health; and view the wearing of masks as renouncing this right. These engrained political beliefs can be traced back to the late 1800s. The response of the United States has also been hampered by a highly cost-efficient healthcare system, which does not provide universal care and has a just-in-time supply chain, with far too few supplies in reserve. This efficiency prevented a rapid scaling up of the healthcare response, which resulted in severe deficiencies in available personal protective equipment (PPE) and healthcare staff. To compound issues many healthcare staff are not provided an economic or healthcare safety net. Other frontline workers, such as those who work in transportation and food services, are working under even greater adversities. Many of these workers are from diverse backgrounds, who, along with their families, are at even greater risk for COVID-19. This vulnerable population of frontline workers are faced with a choice of going to work with inadequate PPE or placing food on their families' table. In the United States, official recommendations seem to be ever changing, based more upon supply and test availability, than on science. We must rely on science and learn from the lessons of past pandemics or we will relive, even to a greater degree, the deaths and devastations experienced by our ancestors over 100 years ago.

How do surgeons weather the storm of COVID-19 pandemic?

COVID-19 has infected more than 10 million people worldwide and it has become one of the biggest challenges in the modern medical history. Wearing of face masks, social distancing, effective hand hygiene and the use of appropriate personal protective equipment are important in flattening the curve of the pandemic. The role of the surgeons in this battle against COVID-19 include curbing the spread of the disease, to protect and preserve the surgical workforce and to ensure the continuance of essential surgical services. We report our experience in dealing with the COVID-19 outbreak in a tertiary surgical centre in the Penang General Hospital in Northern Malaysia.

PPE during a pandemic: The experience of obtaining PPE and lessons learned from a department of obstetrics and gynecology in New York city

The COVID-19 Pandemic is an ongoing crisis that has strained hospitals and health systems around the globe. The provision of personal protective equipment (PPE) for frontline healthcare workers is of utmost importance in sustaining an effective response to this crisis. New York City has experienced one of the most devastating outbreaks of the SARS-CoV-2 virus. In this article we report the experience of the Department of Obstetrics and Gynecology at Columbia University in New York City in managing the supply of PPE for providers and staff during the height of the outbreak. We describe the types of equipment used and aspects of PPE regulation and certification. We also describe our practices in extended use and reuse of PPE in light of the current understanding of the virus characteristics and modes of transmission.

Contamination and washing of cloth masks and risk of infection among hospital health workers in Vietnam: a post hoc analysis of a randomised controlled trial

BACKGROUND

In a previous randomised controlled trial (RCT) in hospital healthcare workers (HCWs), cloth masks resulted in a higher risk of respiratory infections compared with medical masks. This was the only published RCT of cloth masks at the time of the COVID-19 pandemic.

OBJECTIVE

To do a post hoc analysis of unpublished data on mask washing and mask contamination from the original RCT to further understand poor performance of the two-layered cotton cloth mask used by HCWs in that RCT.

SETTING

14 secondary-level/tertiary-level hospitals in Hanoi, Vietnam.

PARTICIPANTS

A subgroup of 607 HCWs aged ≥18 years working full time in selected high-risk wards, who used a two-layered cloth mask and were part of a randomised controlled clinical trial comparing medical masks and cloth masks.

INTERVENTION

Washing method for cloth masks (self-washing or hospital laundry). A substudy of contamination of a sample of 15 cloth and medical masks was also conducted.

OUTCOME MEASURE

Infection rate over 4 weeks of follow up and viral contamination of masks tested by multiplex PCR.

RESULTS

Viral contamination with rhinovirus was identified on both used medical and cloth masks. Most HCW (77% of daily washing) self-washed their masks by hand. The risk of infection was more than double among HCW self-washing their masks compared with the hospital laundry (HR 2.04 (95% CI 1.03 to 4.00); p=0.04). There was no significant difference in infection between HCW who wore cloth masks washed in the hospital laundry compared with medical masks (p=0.5).

CONCLUSIONS

Using self-reported method of washing, we showed double the risk of infection with seasonal respiratory viruses if masks were self-washed by hand by HCWs. The majority of HCWs in the study reported hand-washing their mask themselves. This could explain the poor performance of two layered cloth masks, if the self-washing was inadequate. Cloth masks washed in the hospital laundry were as protective as medical masks. Both cloth and medical masks were contaminated, but only cloth masks were reused in the study, reiterating the importance of daily washing of reusable cloth masks using proper method. A well-washed cloth mask can be as protective as a medical mask.

TRIAL RESGISTRATION NUMBER

ACTRN12610000887077.

Ability of fabric face mask materials to filter ultrafine particles at coughing velocity

OBJECTIVE

We examined the ability of fabrics which might be used to create home-made face masks to filter out ultrafine (0.02-0.1 µm) particles at the velocity of adult human coughing.

METHODS

Twenty commonly available fabrics and materials were evaluated for their ability to reduce air concentrations of ultrafine particles at coughing face velocities. Further assessment was made on the filtration ability of selected fabrics while damp and of fabric combinations which might be used to construct home-made masks.

RESULTS

Single fabric layers blocked a range of ultrafine particles. When fabrics were layered, a higher percentage of ultrafine particles were filtered. The average filtration efficiency of single layer fabrics and of layered combination was found to be 35% and 45%, respectively. Non-woven fusible interfacing, when combined with other fabrics, could add up to 11% additional filtration efficiency. However, fabric and fabric combinations were more difficult to breathe through than N95 masks.

CONCLUSIONS

The current coronavirus pandemic has left many communities without access to N95 face masks. Our findings suggest that face masks made from layered common fabric can help filter ultrafine particles and provide some protection for the wearer when commercial face masks are unavailable.

[Respiratory and Facial Protection: Current Perspectives in the Context of the COVID-19 Pandemic]

The new SARS-CoV-2 pandemic is an example of an international public health emergency, which is associated with considerable social and economic challenges. At the healthcare level there is the risk that nosocomial outbreaks can be local amplifiers. Adequate infection control practices are of critical importance, which include proper use of personal protective equipment. This equipment must be appropriate to the pathogen transmission route that, in the case of SARS-CoV-2, occurs through droplet and contact routes. The infected individual, when talking, coughing or sneezing, spreads droplets containing the virus, directly contaminating other individuals within one to two meters of distance, as well as the surrounding environment. Airborne transmission may occur when aerosol-generating procedures are performed. Concerning respiratory protection, there is currently weak evidence that the use of respirators provides better protection than surgical masks for SARS-CoV-2 or other viruses (with the exception of aerosol-generating procedures, in which case the use of a respirator is recommended). Eye protection should be guaranteed whenever there is a risk of splashes, droplets or aerosols. The use of different, or higher than necessary, level of personal protective equipment, for the transmission route of the agent, is a form of misuse and can affect its supply for situations when it is clearly indicated. The adequate provision of protective equipment, as well as training of healthcare professionals in its correct use, is highly recommended to ensure safety of care.

How to Produce Cheap and Easy Custom-Made Sterilizable Filtering Facepiece 2/3 Masks for Healthcare Providers During Pandemic COVID-19 Emergency

On January 8, 2020, a novel coronavirus was officially announced as the causative pathogen of coronavirus disease (COVID-19) by the Chinese Center for Disease Control and Prevention.On February 26, COVID-19 has been recognized in 34 countries, with a total of 80,239 laboratory-confirmed patients and 2700 deaths.Protecting healthcare workers from infectious hazards is paramount to ensuring their safety in delivering health care.In addition, being able to protect healthcare workers, constituting the front-line response against high-threat respiratory pathogens, such as severe acute respiratory syndrome coronavirus 2, is important for reducing secondary transmission in healthcare-associated outbreaks.Authors present a simple, reliable, and cheap protocol to produce a custom-made sterilizable filtering facepiece 2/3 masks for healthcare providers during pandemic COVID-19 emergency.

Improving Appropriate Use of Medical Masks for COVID-19 Prevention: The Role of Face Mask Containers

Use of medical masks is a key strategy for COVID-19 prevention among healthcare workers. Unfortunately, there are global shortages of this essential commodity, and many have resulted in inappropriate usage to conserve supply. This article highlights the likely benefits of face mask containers in promoting safe, appropriate, and extended use of medical masks by healthcare workers in settings where a sustainable supply of medical masks may be limited.

Last-resort strategies during mask shortages: optimal design features of cloth masks and decontamination of disposable masks during the COVID-19 pandemic

Face masks and respirators are the most widely used intervention measures for respiratory protection. In the wake of COVID-19, in response to shortages and lack of availability of surgical masks and respirators, the use of cloth masks has become a research focus. Various fabrics have been promoted with little evidence-based foundation and without guidelines on design principles for optimal performance. In these circumstances, it is essential to understand the properties, key performance factors, filter mechanisms and evidence on cloth masks materials. The general community might also need to decontaminate and reuse disposable, single-use devices as a last resort. We present an overview of the filter materials, filter mechanisms and effectiveness, key performance factors, and hydrophobicity of the common disposable masks, as well as cloth masks. We also reviewed decontamination methods for disposable respiratory devices. As an alternative to surgical masks and respirators, we recommend a cloth mask made of at least three layers (300-350 threads per inch) and adding a nylon stocking layer over the mask for a better fit. Water-resistant fabrics (polyesters/nylon), blends of fabrics and water-absorbing fabrics (cotton) should be in the outside layer, middle layer/layers and inside layer, respectively. The information outlined here will help people to navigate their choices if facing shortages of appropriate respiratory protection during the COVID-19 pandemic.

Mask or no mask for COVID-19: A public health and market study

Efficient strategies to contain the coronavirus disease 2019 (COVID-19) pandemic are peremptory to relieve the negatively impacted public health and global economy, with the full scope yet to unfold. In the absence of highly effective drugs, vaccines, and abundant medical resources, many measures are used to manage the infection rate and avoid exhausting limited hospital resources. Wearing masks is among the non-pharmaceutical intervention (NPI) measures that could be effectively implemented at a minimum cost and without dramatically disrupting social practices. The mask-wearing guidelines vary significantly across countries. Regardless of the debates in the medical community and the global mask production shortage, more countries and regions are moving forward with recommendations or mandates to wear masks in public. Our study combines mathematical modeling and existing scientific evidence to evaluate the potential impact of the utilization of normal medical masks in public to combat the COVID-19 pandemic. We consider three key factors that contribute to the effectiveness of wearing a quality mask in reducing the transmission risk, including the mask aerosol reduction rate, mask population coverage, and mask availability. We first simulate the impact of these three factors on the virus reproduction number and infection attack rate in a general population. Using the intervened viral transmission route by wearing a mask, we further model the impact of mask-wearing on the epidemic curve with increasing mask awareness and availability. Our study indicates that wearing a face mask can be effectively combined with social distancing to flatten the epidemic curve. Wearing a mask presents a rational way to implement as an NPI to combat COVID-19. We recognize our study provides a projection based only on currently available data and estimates potential probabilities. As such, our model warrants further validation studies.

Face mask use in the general population and optimal resource allocation during the COVID-19 pandemic

The ongoing novel coronavirus disease (COVID-19) pandemic has already infected millions worldwide and, with no vaccine available, interventions to mitigate transmission are urgently needed. While there is broad agreement that travel restrictions and social distancing are beneficial in limiting spread, recommendations around face mask use are inconsistent. Here, we use mathematical modeling to examine the epidemiological impact of face masks, considering resource limitations and a range of supply and demand dynamics. Even with a limited protective effect, face masks can reduce total infections and deaths, and can delay the peak time of the epidemic. However, random distribution of masks is generally suboptimal; prioritized coverage of the elderly improves outcomes, while retaining resources for detected cases provides further mitigation under a range of scenarios. Face mask use, particularly for a pathogen with relatively common asymptomatic carriage, is an effective intervention strategy, while optimized distribution is important when resources are limited.

Role of 3D printing for the protection of surgical and critical care professionals in the COVID-19 pandemic

Antecedentes y objetivo

Durante la pandemia de COVID-19 se produce una reducción del material para la protección de los profesionales. La impresión 3D ofrece la posibilidad de compensar la escasez de algunos de los suministros. El objetivo es describir el papel de la impresión 3D en un servicio de salud durante la pandemia de COVID-19, con énfasis en proceso para desarrollar un producto final listo para ser implementado en el entorno clínico.

Materiales y métodos

Se formó un grupo de trabajo entre la administración sanitaria, clínicos y otras instituciones público-privadas de Cantabria coordinado en el Hospital virtual Valdecilla. El proceso incluyó la recepción de las propuestas de impresión, el conocimiento de los recursos de impresión en la región, la selección de los dispositivos, la creación de un equipo para cada proyecto, diseño de prototipos, evaluación y rediseño, fabricación montaje y distribución.

Resultados

Se producen 1) dispositivos que ayudan a prevenir el contagio de los profesionales: pantallas de protección facial (2.400 unidades), accesorios personalizados para fotóforos (20 unidades) y horquillas salvaorejas para mascarillas (1.200 unidades); 2) productos relacionados con la ventilación de pacientes infectados: conectores de sistemas de ventilación no invasiva entre tubuladura y mascarilla; y 3) hisopos oro y nasofaríngeos (7.500 unidades) para la identificación de portadoras del coronavirus con el objetivo de diseñar protocolos de actuación en las área clínicas.

Conclusiones

La impresión 3D es un recurso válido para la producción de material de protección de los profesionales cuyo suministro está reducido durante una pandemia.

Institution of a Novel Process for N95 Respirator Disinfection with Vaporized Hydrogen Peroxide in the Setting of the COVID-19 Pandemic at a Large Academic Medical Center

Personal protective equipment (PPE) has been an invaluable yet limited resource when it comes to protecting healthcare workers against infection during the 2019 coronavirus (COVID-19) pandemic. In the US, N95 respirator supply chains are severely strained and conservation strategies are needed. A multidisciplinary team at the Washington University School of Medicine, Barnes Jewish Hospital, and BJC Healthcare was formed to implement a program to disinfect N95 respirators. The process described extends the life of N95 respirators using vaporized hydrogen peroxide (VHP) disinfection and allows healthcare workers to retain their own N95 respirator across a large metropolitan healthcare system.

Molecular mechanisms and epidemiology of COVID-19 from an allergist's perspective

The global pandemic caused by the newly described severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused worldwide suffering and death of unimaginable magnitude from coronavirus disease 2019 (COVID-19). The virus is transmitted through aerosol droplets, and causes severe acute respiratory syndrome. SARS-CoV-2 uses the receptor-binding domain of its spike protein S1 to attach to the host angiotensin-converting enzyme 2 receptor in lung and airway cells. Binding requires the help of another host protein, transmembrane protease serine S1 member 2. Several factors likely contribute to the efficient transmission of SARS-CoV-2. The receptor-binding domain of SARS-CoV-2 has a 10- to 20-fold higher receptor-binding capacity compared with previous pandemic coronaviruses. In addition, because asymptomatic persons infected with SARS-CoV-2 have high viral loads in their nasal secretions, they can silently and efficiently spread the disease. PCR-based tests have emerged as the criterion standard for the diagnosis of infection. Caution must be exercised in interpreting antibody-based tests because they have not yet been validated, and may give a false sense of security of being "immune" to SARS-CoV-2. We discuss how the development of some symptoms in allergic rhinitis can serve as clues for new-onset COVID-19. There are mixed reports that asthma is a risk factor for severe COVID-19, possibly due to differences in asthma endotypes. The rapid spread of COVID-19 has focused the efforts of scientists on repurposing existing Food and Drug Administration-approved drugs that inhibit viral entry, endocytosis, genome assembly, translation, and replication. Numerous clinical trials have been launched to identify effective treatments for COVID-19. Initial data from a placebo-controlled study suggest faster time to recovery in patients on remdesivir; it is now being evaluated in additional controlled studies. As discussed in this review, till effective vaccines and treatments emerge, it is important to understand the scientific rationale of pandemic-mitigation strategies such as wearing facemasks and social distancing, and implement them.

Providing evidence on the ongoing health care workers' mask debate

The scarcity of facemasks, particularly N95 respirators, combined with the lack of solid data to address the suitability of each mask type for adequate health care worker (HCW) protection have caused turmoil among HCWs. Current recommendations suggest mask usage solely during HCW contact with Covid-19 patients, namely plain medical mask for low-risk contacts and N95 for aerosol generating procedures. The distinction regarding the escalation of mask complexity depending on contact type is nevertheless based on plausible theoretical assumptions rather than hard evidence of a clear benefit. Conversely, we suggest that at least a plain mask should be used during all HCWs' contacts in healthcare facilities which constitute a highly probable but often overlooked means of SARS-CoV-2 transmission among HCWs.

Household Materials Selection for Homemade Cloth Face Coverings and Their Filtration Efficiency Enhancement with Triboelectric Charging

The COVID-19 pandemic is currently causing a severe disruption and shortage in the global supply chain of necessary personal protective equipment (e.g., N95 respirators). The U.S. CDC has recommended use of household cloth by the general public to make cloth face coverings as a method of source control. We evaluated the filtration properties of natural and synthetic materials using a modified procedure for N95 respirator approval. Common fabrics of cotton, polyester, nylon, and silk had filtration efficiency of 5-25%, polypropylene spunbond had filtration efficiency 6-10%, and paper-based products had filtration efficiency of 10-20%. An advantage of polypropylene spunbond is that it can be simply triboelectrically charged to enhance the filtration efficiency (from 6 to >10%) without any increase in pressure (stable overnight and in humid environments). Using the filtration quality factor, fabric microstructure, and charging ability, we are able to provide an assessment of suggested fabric materials for homemade facial coverings.

Correlation Between N95 Extended Use and Reuse and Fit Failure in an Emergency Department

This cross-sectional study examines prevalence of fit test failure of 2 types of N95 mask (dome-shaped and duckbill) during extended use or reuse among health care workers over 2 days in April 2020 in the UCSF emergency department.

When open source design is vital: critical making of DIY healthcare equipment during the COVID-19 pandemic

Shortages of personal protective equipment (PPE) and medical devices needed during the COVID-19 pandemic were widely reported in early 2020. In response, civic DIY volunteers explored how they could produce the required equipment. Members of communities such as hacker- and makerspaces employed their skills and tools to manufacture, for example, face shields and masks. The article discusses these civic innovation practices and their broader social implications by relating them to critical making theory. Methodologically, it is based on a digital ethnography approach, focusing on hacker and maker communities in the UK. Communities' DIY initiatives display characteristics of critical making and 'craftivism', as they assessed and counteracted politicised healthcare supply shortages. It is argued that their manufacturing activities during the COVID pandemic relate to UK austerity politics' effects on healthcare and government failure to ensure medical crisis supplies. Facilitated by open source design, communities' innovation enabled healthcare emergency equipment. At the same time, their DIY manufacturing raises practical as well as ethical issues concerning, among other things, efficacy and safety of use.

Testing PPE: Are DIY Masks a Viable Alternative to Address Shortages?

As the global pandemic caused by the COVID-19 virus continues to spread, researchers from across the world are harnessing their skills and opening their labs to contribute to solutions for managing and addressing the health crisis. One area identified by hospitals and medical providers as a critical need has been the shortage of personal protective equipment (PPE), which is required to keep health care providers safe from exposure to the virus as they care for patients. In response, manufacturers such as 3M have promised to increase production in order to fulfill the extensive orders. However, medical providers may not see the bulk of these outputs for weeks even as current supplies are running low.

Effectiveness of Common Fabrics to Block Aqueous Aerosols of Virus-like Nanoparticles

Layered systems of commonly available fabric materials can be used by the public and healthcare providers in face masks to reduce the risk of inhaling viruses with protection that is about equivalent to or better than the filtration and adsorption offered by 5-layer N95 respirators. Over 70 different common fabric combinations and masks were evaluated under steady-state, forced convection air flux with pulsed aerosols that simulate forceful respiration. The aerosols contain fluorescent virus-like nanoparticles to track transmission through materials that greatly assist the accuracy of detection, thus avoiding artifacts including pore flooding and the loss of aerosol due to evaporation and droplet breakup. Effective materials comprise both absorbent, hydrophilic layers and barrier, hydrophobic layers. Although the hydrophobic layers can adhere virus-like nanoparticles, they may also repel droplets from adjacent absorbent layers and prevent wicking transport across the fabric system. Effective designs are noted with absorbent layers comprising terry cloth towel, quilting cotton, and flannel. Effective designs are noted with barrier layers comprising nonwoven polypropylene, polyester, and polyaramid.

Comprehensive review of mask utility and challenges during the COVID-19 pandemic

Masks are widely discussed during the course of the ongoing COVID-19 pandemic. Most hospitals have implemented universal masking for their healthcare workers, and the Center for Disease Control currently advises even the general public to wear cloth masks when outdoors. The pertinent need for masks arises from plausible dissemination of the SARS-CoV-2 through close contacts, as well as the possibility of virus transmission from asymptomatic, pre-symptomatic, and mildly symptomatic individuals. Given current global shortages in personal protective equipment, the efficacy of various types of masks: N95 respirators, surgical masks, and cloth masks are researched. To accommodate limited supplies, techniques for extended use, reuse, and sterilization of masks are strategized. However, masks alone may not greatly slow down the COVID-19 pandemic unless they are coupled with adequate social distancing, diligent hand hygiene, and other proven preventive measures.

COVID-19-associated shortage of alcohol-based hand rubs, face masks, medical gloves, and gowns: proposal for a risk-adapted approach to ensure patient and healthcare worker safety

The coronavirus disease 2019 (COVID-19) pandemic has caused a huge demand for alcohol-based hand rubs, medical gloves, face masks, and gowns in healthcare and from the public. More and more hospitals face a serious shortage of these articles. We propose a risk-adapted approach to ensure adequate patient and healthcare worker safety for as long as possible.

Collateral Benefit of COVID-19 Control Measures on Influenza Activity, Taiwan

Taiwan has strictly followed infection control measures to prevent spread of coronavirus disease. Meanwhile, nationwide surveillance data revealed drastic decreases in influenza diagnoses in outpatient departments, positivity rates of clinical specimens, and confirmed severe cases during the first 12 weeks of 2020 compared with the same period of 2019.

Community pharmacist in public health emergencies: Quick to action against the coronavirus 2019-nCoV outbreak

The 2019-nCoV infection that is caused by a novel strain of coronavirus was first detected in China in the end of December 2019 and declared a public health emergency of international concern by the World Health Organization on January 30, 2020. Community pharmacists in one of the first areas that had confirmed cases of the viral infection, Macau, joined the collaborative force in supporting the local health emergency preparedness and response arrangements. This paper aimed to improve the understanding of community pharmacists' role in case of 2019-CoV outbreak based on the practical experiences in consultation with the recommendations made by the International Pharmaceutical Federation on the Coronavirus 2019-nCoV outbreak.

Preparedness of health facilities providing HIV services during COVID-19 pandemic and assessment of their compliance to COVID-19 prevention measures: findings from the Tanzania Service Provision Assessment (SPA) survey

Introduction

the increased demands of health facilities and workers due to coronavirus overwhelm the already burdened Tanzanian health systems. This study evaluates the current capacity of facilities and providers for HIV care and treatment services and their preparedness to adhere to the national and global precaution guidelines for HIV service providers and patients.

Methods

data for this study come from the latest available, Tanzania Service Provision Assessment survey 2014-15. Frequencies and percentages described the readiness and availability of HIV services and providers. Chi-square test compared the distribution of services by facility location and availability and readiness of precaution commodities and HIV services by managing authorities.

Results

availability of latex gloves was high (83% at OPD and 95.3% laboratory). Availability of medical masks, alcohol-based hand rub and disinfectants was low. Availability of medical mask at outpatient department (OPD) was 28.7% urban (23.5% public; 33.8% private, p=0.02) and 13.5% rural (10.1% public; 25.4% private, p=0.001) and lower at laboratories. Fewer facilities in rural area (68.4%) had running water in OPD than urban (86.3%). Higher proportions of providers at public than private facilities in urban (82.8% versus 73.1%) and rural (88.2% versus 81.6%) areas provided HIV test counseling and at least two other HIV services.

Conclusion

availability of commodities such as medical masks, alcohol-based hand rub, and disinfectant was low while the readiness of providers to multitask HIV related services was high. Urgent distribution and re-assessment of these supplies are necessary, to protect HIV patients, their caregivers, and health providers from COVID-19.

Are we ready for the avian flu?

It may be tempting to dismiss headlines about a potential avian flu pandemic as "the sky is falling" sensationalism, but experts continue to warn that the disease is likely to show up here in the not-too-distant future. What must hospitals do to prepare for a sudden influx of patients and other huge demands such a crisis would create?