Surface Patterning of Closed Nanochannel Using VUV Light and Surface Evaluation by Streaming Current

In nanofluidics, surface control is a critical technology because nanospaces are surface-governed spaces as a consequence of their extremely high surface-to-volume ratio. Various surface patterning methods have been developed, including patterning on an open substrate and patterning using a liquid modifier in microchannels. However, the surface patterning of a closed nanochannel is difficult. In addition, the surface evaluation of closed nanochannels is difficult because of a lack of appropriate experimental tools. In this study, we verified the surface patterning of a closed nanochannel by vacuum ultraviolet (VUV) light and evaluated the surface using streaming-current measurements. First, the C₁₈ modification of closed nanochannels was confirmed by Laplace pressure measurements. In addition, no streaming-current signal was detected for the C₁₈-modified surface, confirming the successful modification of the nanochannel surface with C₁₈ groups. The C₁₈ groups were subsequently decomposed by VUV light, and the nanochannel surface became hydrophilic because of the presence of silanol groups. In streaming-current measurements, the current signals increased in amplitude with increasing VUV light irradiation time, indicating the decomposition of the C₁₈ groups on the closed nanochannel surfaces. Finally, hydrophilic/hydrophobic patterning by VUV light was performed in a nanochannel. Capillary filling experiments confirmed the presence of a hydrophilic/hydrophobic interface. Therefore, VUV patterning in a closed nanochannel was demonstrated, and the surface of a closed nanochannel was successfully evaluated using streaming-current measurements.

Effect of vein-bionic surface textures on the tribological behavior of cylindrical roller thrust bearing under starved lubrication

To reveal the effect of vein-bionic surface textures on the tribological behavior of cylindrical roller thrust bearings (CRTBs) under starved lubrication, six kinds of leaves (Forsythia, Clausena lansiu, Ash, Purple leaf plum, Pipal and Apricot) were chose and their simplified patterns were fabricated on the shaft washers of CRTBs using laser surface texturing. The coefficients of friction (COFs) of vein-bionic textured bearings were measured using a vertical universal wear test rig. Their mass losses and worn surfaces were also characterized. The results show that: There is important influence of the symmetry of vein-bionic textures and the number of secondary veins on the friction and wear properties of vein-bionic textured CRTBs under starved lubrication. Compared to the smooth group, the COFs and mass losses of vein-bionic textured bearings are all reduced. Among all groups, the tribological performance of bearings with a pattern inspired from Ash is the best. Its wear loss is reduced by 16.23% and its COF is reduced by 15.79%. This work would provide a valuable reference for the raceway design and optimization of roller rolling element bearings.

Cactus-Spine-Inspired Sweat-Collecting Patch for Fast and Continuous Monitoring of Sweat

A sweat sensor is expected to be the most appropriate wearable device for noninvasive healthcare monitoring. However, the practical use of sweat sensors is impeded by irregular and low sweat secretion rates. Here, a sweat-collecting patch that can collect sweat efficiently for fast and continuous healthcare monitoring is demonstrated. The patch uses cactus-spine-inspired wedge-shaped wettability-patterned channels on a hierarchical microstructured/nanostructured surface. The channel shape, in combination with the superhydrophobic/superhydrophilic surface materials, induces a unidirectional Laplace pressure that transports the sweat to the sensing area spontaneously even when the patch is aligned vertically. The patch demonstrates superior sweat-collecting efficiency and reduces the time required to fill the sensing area by transporting sweat almost without leaving it inside the channel. Therefore, a sensor based on the patch responds quickly to biochemicals in sweat, and the patch enables the continuous monitoring of changes in sweat biochemicals according to their changes in the wearer's blood.

Enlargement, Reduction, and Even Reversal of Relative Migration Speeds of Endothelial and Smooth Muscle Cells on Biomaterials Simply by Adjusting RGD Nanospacing

Although many tissue regeneration processes after biomaterial implantation are related to migrations of multiple cell types on material surfaces, available tools to adjust relative migration speeds are very limited. Herein, we put forward a nanomaterial strategy to employ surface modification with arginine-glycine-aspartate (RGD) nanoarrays to tune in vitro cell migration using endothelial cells (ECs) and smooth muscle cells (SMCs) as demonstrated cell types. We found that migrations of both cell types exhibited a nonmonotonic trend with the increase of RGD nanospacing, yet with different peaks-74 nm for SMCs but 95 nm for ECs. The varied sensitivities afford a facile way to regulate the relative migration speeds. Although ECs migrated at a speed similar to SMCs on a non-nano surface, the migration of ECs could be controlled to be significantly faster or slower than SMCs simply by adjusting the RGD nanospacing. This study suggests a potential application of surface modification of biomaterials on a nanoscale level.

3D electron-beam writing at sub-15 nm resolution using spider silk as a resist

Electron beam lithography (EBL) is renowned to provide fabrication resolution in the deep nanometer scale. One major limitation of current EBL techniques is their incapability of arbitrary 3d nanofabrication. Resolution, structure integrity and functionalization are among the most important factors. Here we report all-aqueous-based, high-fidelity manufacturing of functional, arbitrary 3d nanostructures at a resolution of sub-15 nm using our developed voltage-regulated 3d EBL. Creating arbitrary 3d structures of high resolution and high strength at nanoscale is enabled by genetically engineering recombinant spider silk proteins as the resist. The ability to quantitatively define structural transitions with energetic electrons at different depths within the 3d protein matrix enables polymorphic spider silk proteins to be shaped approaching the molecular level. Furthermore, genetic or mesoscopic modification of spider silk proteins provides the opportunity to embed and stabilize physiochemical and/or biological functions within as-fabricated 3d nanostructures. Our approach empowers the rapid and flexible fabrication of heterogeneously functionalized and hierarchically structured 3d nanocomponents and nanodevices, offering opportunities in biomimetics, therapeutic devices and nanoscale robotics.

Critical adhesion areas of cells on micro-nanopatterns

Cell adhesion to extracellular matrices (ECM) is critical to physiological and pathological processes as well as biomedical and biotechnological applications. It has been known that a cell can adhere on an adhesive microisland only over a critical size. But no publication has concerned critical adhesion areas of cells on microislands with nanoarray decoration. Herein, we fabricated a series of micro-nanopatterns with different microisland sizes and arginine-glycine-aspartate (RGD) nanospacings on a nonfouling poly(ethylene glycol) background. Besides reproducing that nanospacing of RGD, a ligand of its receptor integrin (a membrane protein), significantly influences specific cell adhesion on bioactive nanoarrays, we confirmed that the concept of critical adhesion area originally suggested in studies of cells on micropatterns was justified also on the micro-nanopatterns, yet the latter exhibited more characteristic behaviors of cell adhesion. We found increased critical adhesion areas of human mesenchymal stem cells (hMSCs) on nanoarrayed microislands with increased RGD nanospacings. However, the numbers of nanodots with respect to the critical adhesion areas were not a constant. A unified interpretation was then put forward after combining nonspecific background adhesion and specific cell adhesion. We further carried out the asymptotic analysis of a series of micro-nanopatterned surfaces to obtain the effective RGD nanospacing on unpatterned free surfaces with densely grafted RGD, which could be estimated nonzero but has never been revealed previously without the assistance of the micro-nanopatterning techniques and the corresponding analysis.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary materials and methods (details of fabrication of micro-nanopatterns), and supplementary results (selective adhesion or localization of hMSCs on nanoarrayed microislands with non-fouling background, calculation of critical number of integrin-ligand binding N*, etc.) are available in the online version of this article at 10.1007/s12274-021-3711-6.

Surface Patterning of Two-Dimensional Nanostructure-Embedded Photothermal Hydrogels for High-Yield Solar Steam Generation

Improving evaporation rate is extremely important to promote the application of solar steam generation in clean water production through seawater desalination. However, the theoretical evaporation rate limit of a normal two-dimensional (2D) photothermal evaporator is only about 1.46 kg m^-2 h^-1. While 3D evaporators can break the limit, they require much more raw materials. In this work, an effective approach for achieving high-yield solar steam generation via the synergy of 2D nanostructure-embedded all-in-one hybrid hydrogel evaporator and surface patterning is reported. This improved surface-patterned evaporator is able to simultaneously lower the enthalpy of vaporization and induce the Marangoni effect near the evaporation surface, thus delivering a high evaporation rate of 3.62 kg m^-2 h^-1, which is more than twice the theoretical limit of the normal 2D photothermal evaporator. This hybrid hydrogel offers a cost-effective and energy-efficient pathway to mitigate clean water shortages.

Electrochemical, Tribological and Biocompatible Performance of Electron Beam Modified and Coated Ti6Al4V Alloy

Vacuum cathodic arc TiN coatings with overlaying TiO₂ film were deposited on polished and surface roughened by electron beam modification (EBM) Ti6Al4V alloy. The substrate microtopography consisted of long grooves formed by the liner scan of the electron beam with appropriate frequencies (500 (AR500) and 850 (AR850) Hz). EBM transformed the α + β Ti6Al4V mixed structure into a single α'-martensite phase. Тhe gradient TiN/TiO₂ films deposited on mechanically polished (AR) and EBM (AR500 and AR850) alloys share the same surface chemistry and composition (almost stoichiometric TiN, anatase and rutile in different ratios) but exhibit different topographies (S_a equal to approximately 0.62, 1.73, and 1.08 μm, respectively) over areas of 50 × 50 μm. Although the nanohardness of the coatings on AR500 and AR850 alloy (approximately 10.45 and 9.02 GPa, respectively) was lower than that measured on the film deposited on AR alloy (about 13.05 GPa), the hybrid surface treatment offered improvement in critical adhesive loads, coefficient of friction, and wear-resistance of the surface. In phosphate buffer saline, all coated samples showed low corrosion potentials and passivation current densities, confirming their good corrosion protection. The coated EBM samples cultured with human osteoblast-like MG63 cells demonstrated increased cell attachment, viability, and bone mineralization activity especially for the AR500-coated alloy, compared to uncoated polished alloy. The results underline the synergetic effect between the sub-micron structure and composition of TiN/TiO₂ coating and microarchitecture obtained by EBM.

Polymer Coupling via Hetero-Disulfide Exchange and Its Applications to Rewritable Polymer Brushes

An iodide-terminated polymer (Polymer-I) is converted to a thiol-terminated polymer (Polymer-SH) using HSCH₂CH₂SH in a remarkably short time (10 min). Polymer-SH is further converted to a pyridyl disulfide-terminated polymer (Polymer-SS-Py). The hetero-coupling of Polymer-SH and Polymer-SS-Py is successfully achieved to quantitatively generate a polymer disulfide (Polymer-SS-Polymer). Exploiting this efficient hetero-coupling technique, Polymer-SH is attached (grafted) on a Py-SS-immobilized surface to generate a polymer brush via a disulfide (-SS-) linkage (writing process). The -SS- linkage is cleaved by the treatment with dithiothreitol (DTT) to detach the polymer from the surface (erasing process). Subsequently, another Polymer-SH is attached on the surface to generate another polymer brush (rewriting process). Thus, a writable, erasable, and rewritable polymer brush surface is achieved. Hydrophilic, hydrophobic, and super-hydrophobic polymers (Polymer-SH) are attached on the surface, tailoring the surface wettability in the writing-erasing-rewriting cycles. Polymer-SH is also attached on a chain-end Py-SS-functionalized polymer brush surface, generating a rewritable block copolymer brush surface. A patterned block copolymer brush surface is also obtained using photo-irradiation and a photo-mask in the erasing process. The metal-free synthetic procedure, accessibility to patterned brushes, and switchable surface properties via the writing-erasing-rewriting process are attractive features of the present approach.

Origami-inspired thin-film shape memory alloy devices

We describe the design and fabrication of miniaturized origami structures based on thin-film shape memory alloys. These devices are attractive for medical implants, as they overcome the opposing requirements of crimping the implant for insertion into an artery while keeping sensitive parts of the implant nearly stress-free. The designs are based on a group theory approach in which compatibility at a few creases implies the foldability of the whole structure. Importantly, this approach is versatile and thus provides a pathway for patient-specific treatment of brain aneurysms of differing shapes and sizes. The wafer-based monolithic fabrication method demonstrated here, which comprises thin-film deposition, lithography, and etching using sacrificial layers, is a prerequisite for any integrated self-folding mechanism or sensors and will revolutionize the availability of miniaturized implants, allowing for new and safer medical treatments.

Continuous monitoring of cell transfection efficiency with micropatterned substrates

The effect of cell-cell contact on gene transfection is mainly unknown. Usually, transfection is carried out in batch cell cultures without control over cellular interactions, and efficiency analysis relies on complex and expensive protocols commonly involving flow cytometry as the final analytical step. Novel platforms and cell patterning are being studied to control cellular interactions and improve quantification methods. In this study, we report the use of surface patterning of fibronectin for the generation of two types of mesenchymal stromal cell patterns: single-cell patterns without cell-to-cell contact, and small cell-colony patterns. Both scenarios allowed the integration of the full transfection process and the continuous monitoring of thousands of individualized events by fluorescence microscopy. Our results showed that cell-to-cell contact clearly affected the transfection, as single cells presented a maximum transfection peak 6 h earlier and had a 10% higher transfection efficiency than cells with cell-to-cell contact.

A Wetting-Enabled-Transfer (WET) Strategy for Precise Surface Patterning of Organohydrogels

The ability to manipulate water and oil phases in a designable manner is of great significance in widespread fields from art paintings to materials science. However, achieving precise and stable surface patterns for two immiscible phases of water and oil remains a challenge. Herein, a general wetting-enabled-transfer (WET) strategy is reported to construct discretionary shape-defined surface patterns of organohydrogels along with their monolithic formation either from flat to curved surfaces or from the microscale to the macroscale. Locally differentiated wettability induces hydrophilic monomers and hydrophobic monomers from an emulsion system onto the wettability-matching regions of the prepatterned substrates, subsequently forming corresponding hydrogel and organogel patterns on the organohydrogel surface after in situ photopolymerization. The precision of the surface patterns can be controlled by optimizing the gel monomers, emulsion droplet size, and surface chemical composition of the prepatterned substrates. This finding may provide a feasible strategy for precisely patterning functional materials from two-immiscible-phase systems.

Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint

This work describes the fabrication process of moth eye antireflective poly (methyl methacrylate) transparent films via roll to roll thermal nanoimprint lithography. The process parameters are investigated and adjusted in order to obtain from a single moth-eye structured mold, a range of antireflective topographies that gradually vary their geometry from protruding to intruding nanocones. A correlation between the process parameters with the optical and mechanical properties of the films is established to illustrate the influence of the processing parameters and serve as guideline to produce antireflective flexible films with balanced properties and optimized performance adequate to the application environment. A finite element model is described predicting the mechanical behavior of the moth-eye PMMA imprinted nanostructures.

Catecholamine-Copper Redox as a Basis for Site-Specific Single-Step Functionalization of Material Surfaces

Realization of robust and facile surface functionalization processes is critical to biomaterials and biotechnology yet remains a challenge. Here, we report a new chemical approach that enables operationally simple and site-specific surface functionalization. The mechanism involves a catechol-copper redox chemistry, where the oxidative polymerization of an alkynyl catecholamine reduces Cu(II) to Cu(I), which in situ catalyzes a click reaction with azide-containing molecules of interest (MOIs). This process enables drop-coating and grafting of two- and three-dimensional solid surfaces in a single operation using as small as sub-microliter volumes. Generalizability of the method is shown for immobilizing MOIs of diverse structure and chemical or biological activity. Biological applications in anti-biofouling, cellular adhesion, scaffold seeding, and tissue regeneration are demonstrated, in which the activities or fates of cells are site-specifically manipulated. This work advances surface chemistry by integrating simplicity and precision with multipurpose surface functionalization.

Recycling silver nanoparticle debris from laser ablation of silver nanowire in liquid media toward minimum material waste

As silver nanowires (Ag NWs) are usually manufactured by chemical synthesis, a patterning process is needed to use them as functional devices. Pulsed laser ablation is a promising Ag NW patterning process because it is a simple and inexpensive procedure. However, this process has a disadvantage in that target materials are wasted owing to the subtractive nature of the process involving the removal of unnecessary materials, and large quantities of raw materials are required. In this study, we report a minimum-waste laser patterning process utilizing silver nanoparticle (Ag NP) debris obtained through laser ablation of Ag NWs in liquid media. Since the generated Ag NPs can be used for several applications, wastage of Ag NWs, which is inevitable in conventional laser patterning processes, is dramatically reduced. In addition, electrophoretic deposition of the recycled Ag NPs onto non-ablated Ag NWs allows easy fabrication of junction-enhanced Ag NWs from the deposited Ag NPs. The unique advantage of this method lies in using recycled Ag NPs as building materials, eliminating the additional cost of junction welding Ag NWs. These fabricated Ag NW substrates could be utilized as transparent heaters and stretchable TCEs, thereby validating the effectiveness of the proposed process.

Thioacetate-Based Initiators for the Synthesis of Thiol-End-Functionalized Poly(2-oxazoline)s

New functional initiators for the cationic ring-opening polymerization of 2-alkyl-2-oxazolines are described to introduce a thiol moiety at the α terminus. Both tosylate and nosylate initiators carrying a thioacetate group are obtained in multigram scale, from commercial reagents in two steps, including a phototriggered thiol-ene radical addition. The nosylate derivative gives access to a satisfying control over the cationic ring-opening polymerization of 2-ethyl-2-oxazoline, with dispersity values lower than 1.1 during the entire course of the polymerization, until full conversion. Cleavage of the thioacetate end group is rapidly achieved using triazabicyclodecene, thereby leading to a mercapto terminus. The latter gives access to a new subgeneration of α-functional poly(2-oxazoline)s (butyl ester, N-hydroxysuccinimidyl ester, furan) by Michael addition with commercial (meth)acrylates. The amenability of the mercapto-poly(2-ethyl-2-oxazoline) for covalent surface patterning onto acrylated surfaces is demonstrated in a microchannel cantilever spotting (µCS) experiment, characterized by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary-ion mass spectrometry (ToF-SIMS).

Patterning Biological Gels for 3D Cell Culture inside Microfluidic Devices by Local Surface Modification through Laminar Flow Patterning

Microfluidic devices are used extensively in the development of new in vitro cell culture models like organs-on-chips. A typical feature of such devices is the patterning of biological hydrogels to offer cultured cells and tissues a controlled three-dimensional microenvironment. A key challenge of hydrogel patterning is ensuring geometrical confinement of the gel, which is generally solved by inclusion of micropillars or phaseguides in the channels. Both of these methods often require costly cleanroom fabrication, which needs to be repeated even when only small changes need be made to the gel geometry, and inadvertently expose cultured cells to non-physiological and mechanically stiff structures. Here, we present a technique for facile patterning of hydrogel geometries in microfluidic chips, but without the need for any confining geometry built into the channel. Core to the technique is the use of laminar flow patterning to create a hydrophilic path through an otherwise hydrophobic microfluidic channel. When a liquid hydrogel is injected into the hydrophilic region, it is confined to this path by the surrounding hydrophobic regions. The various surface patterns that are enabled by laminar flow patterning can thereby be rendered into three-dimensional hydrogel structures. We demonstrate that the technique can be used in many different channel geometries while still giving the user control of key geometric parameters of the final hydrogel. Moreover, we show that human umbilical vein endothelial cells can be cultured for multiple days inside the devices with the patterned hydrogels and that they can be stimulated to migrate into the gel under the influence of trans-gel flows. Finally, we demonstrate that the patterned gels can withstand trans-gel flow velocities in excess of physiological interstitial flow velocities without rupturing or detaching. This novel hydrogel-patterning technique addresses fundamental challenges of existing methods for hydrogel patterning inside microfluidic chips, and can therefore be applied to improve design time and the physiological realism of microfluidic cell culture assays and organs-on-chips.

Formation of the hollow nanopillar arrays through the laser-induced transformation of TiO2 nanotubes

In the following article, we present a simple, two-step method of creating spaced, hollow nanopillars, from the titania nanotube arrays via pulsed laser-treatment. Due to the high ordering of the structure, the prepared material exhibits photonic properties, which has been shown to increase the overall photoefficiency. The optical and morphological changes in the titania nanotubes after pulsed laser-treatment with 532, 355, and 266 nm wavelengths in the 10-50 mJ/cm2 fluence range are studied. The investigation reveals, that by using appropriate wavelength and energy, the number of surface defects, geometrical features, or both can be tailored.

l-DNA Duplex Formation as a Bioorthogonal Information Channel in Nucleic Acid-Based Surface Patterning

Photolithographic in situ synthesis of nucleic acids enables extremely high oligonucleotide sequence density as well as complex surface patterning and combined spatial and molecular information encoding. No longer limited to DNA synthesis, the technique allows for total control of both chemical and Cartesian space organization on surfaces, suggesting that hybridization patterns can be used to encode, display or encrypt informative signals on multiple chemically orthogonal levels. Nevertheless, cross-hybridization reduces the available sequence space and limits information density. Here we introduce an additional, fully independent information channel in surface patterning with in situ l-DNA synthesis. The bioorthogonality of mirror-image DNA duplex formation prevents both cross-hybridization on chimeric l-/d-DNA microarrays and also results in enzymatic orthogonality, such as nuclease-proof DNA-based signatures on the surface. We show how chimeric l-/d-DNA hybridization can be used to create informative surface patterns including QR codes, highly counterfeiting resistant authenticity watermarks, and concealed messages within high-density d-DNA microarrays.

Shape Programming by Modulating Actuation over Hierarchical Length Scales

Many active materials used in shape-morphing respond to an external stimulus by stretching or contracting along a director field. The programming of such actuators remains complex because of the single degree of freedom (the orientation) in local actuation. Here, texturing this field in zigzag patterns is shown to provide an extended family of biaxial active stretches out of an otherwise single uniaxial active deformation, opening a larger parameter space. By further modulating the zigzag patterns at the larger scale of the structure, its deployed shape can be controlled. This notion of texturing over hierarchical length scales follows geometrical principles, and is robust against changes in size and materials. The robustness of the approach is demonstrated by considering three different responsive materials: inextensible flat fabrics, channel-bearing elastomer (respectively, contracting and expanding perpendicularly to the director field when actuated pneumatically), and 3D-printed thermoplastic (composed of extruded filaments that contract when heated). It is shown that large-scale shape-morphing structures can be generated and that their geometry can be controlled with high accuracy.

Material-Selective Polydopamine Coating in Dimethyl Sulfoxide

Polydopamine coating is known to be performed in a material-independent manner and has become a popular tool when designing a surface-functionalization strategy of a given material. Studies to improve polydopamine coatings have been reported, aiming to reduce the coating time (by transition metals, oxidants, applied voltages, or microwave irradiation), control surface roughness using catechol derivatives, and vary the ad-layer molecules formed on an underlying polydopamine layer. However, none of the techniques have changed the most important intrinsic property of polydopamine, the surface-independent coating. Currently, no method has been reported to modify this property to create a material-selective 'smart' polydopamine coating. Herein, we report a method with polydopamine to differentiate the chemistry of surfaces. We found that the polydopamine coating was largely inhibited on silicon-containing surfaces such as Si wafers and quartz crystals in a dimethyl sulfoxide (DMSO)/phosphate-buffered saline (PBS) cosolvent, while the coating properties on other materials remained mostly unchanged. Among the various interface bonding mechanisms of coordination, namely, cation-π, π-π stacking, and hydrogen-bonding interactions, the DMSO/PBS cosolvent effectively inhibits hydrogen-bond formation between catechol and SiO₂, resulting in surface-selective 'smart' polydopamine coatings. The new polydopamine coating is useful for functionalizing patterned surfaces such as Au patterns on SiO₂ substrates. Considering that Si wafer is the most widely used substrate, the surface-selective polydopamine coating technique described herein opens up a new direction in surface functionalization and interface chemistry.

Objective homogeneity quantification of a periodic surface using the Gini coefficient

The significance of periodic surface structuring methods, such as direct laser interference patterning, is growing steadily. Thus, the ability to objectively and consistently evaluate these surfaces is increasingly important. Standard parameters such as surface roughness or the arithmetic average height are meant to quantify the deviation of a real surface from an ideally flat one. Periodically patterned surfaces, however, are an intentional deviation from that ideal. Therefore, their surface profile has to be separated into a periodic and a non-periodic part. The latter can then be analyzed using the established surface parameters and the periodic nature allows a quantification of structure homogeneity, e.g. based on Gini coefficient. This work presents a new combination of established methods to reliably and objectively evaluate periodic surface quality. For this purpose, the periodicity of a given surface is extracted by Fourier analysis, and its homogeneity with respect to a particular property is determined for the repeating element via a Gini analysis. The proposed method provides an objective and reliable instrument for evaluating the surface quality for the selected attribute regardless of the user. Additionally, this technique can potentially be used to both identify a suitable surface structuring technique and determine the optimal process parameters.

Boundary-directed epitaxy of block copolymers

Directed self-assembly of block copolymers (BCPs) enables nanofabrication at sub-10 nm dimensions, beyond the resolution of conventional lithography. However, directing the position, orientation, and long-range lateral order of BCP domains to produce technologically-useful patterns is a challenge. Here, we present a promising approach to direct assembly using spatial boundaries between planar, low-resolution regions on a surface with different composition. Pairs of boundaries are formed at the edges of isolated stripes on a background substrate. Vertical lamellae nucleate at and are pinned by chemical contrast at each stripe/substrate boundary, align parallel to boundaries, selectively propagate from boundaries into stripe interiors (whereas horizontal lamellae form on the background), and register to wide stripes to multiply the feature density. Ordered BCP line arrays with half-pitch of 6.4 nm are demonstrated on stripes >80 nm wide. Boundary-directed epitaxy provides an attractive path towards assembling, creating, and lithographically defining materials on sub-10 nm scales.

Device-quality, reconfigurable metamaterials from shape-directed nanocrystal assembly

Anchoring nanoscale building blocks, regardless of their shape, into specific arrangements on surfaces presents a significant challenge for the fabrication of next-generation chip-based nanophotonic devices. Current methods to prepare nanocrystal arrays lack the precision, generalizability, and postsynthetic robustness required for the fabrication of device-quality, nanocrystal-based metamaterials [Q. Y. Lin et al. Nano Lett. 15, 4699-4703 (2015); V. Flauraud et al., Nat. Nanotechnol. 12, 73-80 (2017)]. To address this challenge, we have developed a synthetic strategy to precisely arrange any anisotropic colloidal nanoparticle onto a substrate using a shallow-template-assisted, DNA-mediated assembly approach. We show that anisotropic nanoparticles of virtually any shape can be anchored onto surfaces in any desired arrangement, with precise positional and orientational control. Importantly, the technique allows nanoparticles to be patterned over a large surface area, with interparticle distances as small as 4 nm, providing the opportunity to exploit light-matter interactions in an unprecedented manner. As a proof-of-concept, we have synthesized a nanocrystal-based, dynamically tunable metasurface (an anomalous reflector), demonstrating the potential of this nanoparticle-based metamaterial synthesis platform.

High-Throughput Multiobjective Optimization of Patterned Multifunctional Surfaces

The realization and optimization of multifunctional materials is difficult, especially when the functionalities are directly incompatible. For example, it is challenging to make surfaces both enzymatically active and water repellent, as these two properties are directly competitive because of the hydrophilic nature of the enzyme-laden surfaces. Patterning discrete domains of distinct functionalities can represent a path to multifunctionality, but the innumerable possible domain permutations present a major barrier to optimizing performance. Here, we develop a high-throughput approach for exploring patterned multifunctional surfaces that is inspired by the microtiter plate architecture. As a model system, patterned surfaces are realized with horseradish peroxidase-decorated domains amidst a background of hydrophobic fluorinated self-assembled monolayers. In experiments exploring effects of pattern geometry, the measured enzyme activity is dependent only on the surface coverage. In contrast, roll-off behavior strongly depends on the parameters of the pattern geometry. Importantly, this finding enables the precise tailoring of distinct wetting behavior of the surfaces in a manner that is independent of their enzymatic activity. The high-throughput nature of the platform facilitates multiobjective optimization of surface functionalities in a general and flexible manner.