Adsorption mechanisms of five bisphenol analogues on PVC microplastics

Membrane fouling characteristics and mechanisms in coagulation-ultrafiltration process for treating microplastic-containing water

Microplastics (MPs) are recognized as a significant challenge to water treatment processes due to their ability to adsorb or accumulate alginate foulants, impacting the coagulation-ultrafiltration (CUF) process. In this study, the mechanisms of membrane fouling caused by MPs under varying dosages of polymeric aluminum chloride (PAC) coagulant in the CUF process were investigated. It was revealed that MPs contribute to membrane fouling, which initially intensifies and then alleviates as coagulant concentration increases, with a turning point at 0.05 mM PAC dosage. The most significant alleviation of membrane fouling was observed at 0.2 mM PAC dosage. An in-depth analysis of interfacial interaction energy changes during filtration was conducted using the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, demonstrating how MPs alter the interaction forces between foulants and the membrane surface, leading to either the exacerbation or mitigation of fouling. Additionally, it was shown that at optimal coagulant concentrations, the presence of MPs promotes the formation of a loose and porous cake layer, disrupting the original structure and creating a more open block structure, thereby alleviating membrane fouling. These findings provide valuable insights for optimizing the CUF process in microplastic-containing water treatment, presenting a novel approach to enhancing efficiency and reducing membrane fouling.

Assessing the interaction between 4-methylbenzylidene camphor and microplastic fibers in aquatic environments: Adsorption kinetics and mechanisms

Wastewater treatment plants play a crucial role in managing environmental pollutants, but they often release persistent contaminants like synthetic microplastic fibers (MPFs) into ecosystems. These microplastics, mainly from the textile industry and domestic washing of synthetic fabrics, are a major type of microplastic found in aquatic environments. Some harmful chemicals have an affinity for these microplastics, making them vectors for contaminants. This study investigates the adsorption of 4-methylbenzylidene camphor (4-MBC), an organic UV filter, onto microplastic fibers from two different sources. Batch experiments conducted at room temperature (25 °C) under laboratory conditions assessed the adsorption kinetics and mechanisms. Morphological and visual characterization of the microplastic fibers was done using optical microscopy and scanning electron microscopy (SEM), revealing diverse shapes, types, and colors. Physico-chemical properties were confirmed through thermogravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FTIR). The data matched well with the PSO kinetic model and Langmuir isotherm, indicating monolayer chemisorption with equilibrium achieved within 24 h. The adsorption mechanisms involved electrostatic attraction, hydrogen bonding, and π-π interactions. Both types of microplastic fibers exhibited a tendency to adsorb 4-MBC, indicating the significance of this research in understanding the interactions between this compound and various fiber types emphasizing the need for further research under the different environmental conditions.

Polyvinyl chloride microplastics disseminate antibiotic resistance genes in Chinese soil: A metagenomic analysis

The widespread prevalence of microplastics (MPs) in the environment poses concerns as they are vectors of antibiotic resistance genes (ARGs). The relationships between antibiotic resistomes and MPs remain unexplored in soil which was considered as the reservoirs of MPs and ARGs. This study investigated the effects of polyvinyl chloride (PVC) MPs on soil bacterial communities and ARG abundance which soil samples sourced from 20 provinces across China. We found that PVC significantly influences soil bacterial community structure and ARG abundance. Structural equation modeling revealed that PVC alters soil characteristics, ultimately affecting soil bacterial communities, including ARG-containing bacterial hosts, and the relative abundance of ARGs. This study enhances our understanding of how MPs influence the proliferation and hosts of ARGs within diverse soil environments, offering crucial insights for future strategies in plastic management and disposal.

Microplastic and antibiotics in waters: Interactions and environmental risks

Antibiotics (ATs) are ubiquitously detected in natural waters worldwide, and their tendency to co-migrate with microplastics (MPs) post-adsorption leads to heightened environmental risk. Research on the adsorption of ATs on MPs and their subsequent effects on the environmental risks is gaining significant attention globally. This adsorption process predominantly occurs through hydrophobic forces, hydrogen bonds, and electrostatic interactions and is influenced by various environmental factors. The interaction between MPs and ATs exhibited varying degrees of efficiency across different pH levels and ionic strengths. Furthermore, this paper outlines the environmental risks associated with the co-presence of MPs and ATs in aquatic environments, emphasizing the potential effect of MPs on the distribution of antibiotic resistance genes (ARGs) and related environmental risks. The potential hazards posed by MPs and ATs in aquatic systems warrant serious consideration. Future research should concentrate on the adsorption of ATs/ARGs on MPs under real environmental conditions, horizontal gene transfer on MPs, as well as biofilm formation and agglomeration behavior on MPs that needs to be emphasized.

Microalgae separation in MP-PVC contaminated wastewater using plant-based coagulant over different extraction methods in Bauru, Brazil

This study investigates the effectiveness of coagulation-flocculation and sedimentation (CFS) for separating microalgae, focusing on the use of various Moringa oleifera extracts as natural coagulants. We examined photobioreactor effluent (PBR) both with and without microplastic PVC (MP-PVC) contamination, referred to as PBR R2 and PBR R1, respectively. Utilising response surface methodology, we identified optimal conditions for the removal of microalgae and MP-PVC. Validation tests demonstrated that the aqueous extract of delipidated Moringa oleifera powder (AEDMOP) achieved high removal efficiencies, with coagulant dosages of 630 mg L-1 for PBR R1 and 625 mg L-1 for PBR R2. Both conditions showed microalgae removal efficiencies exceeding 83% for turbidity, colour, OD540 nm, OD680 nm, and OD750 nm, and 63% for OD254 nm. Interestingly, the optimised conditions for PBR R2 required slightly less coagulant, likely due to the additional particulate matter from MP-PVC. While extracellular polymeric substances (EPS) exhibited a marginal effect on flocculation, further investigation into their role in CFS is necessary. Our findings highlight the potential of AEDMOP for efficient microalgae separation, even in the presence of microplastics.

Microplastics meet micropollutants in a central european river stream: Adsorption of pollutants to microplastics under environmentally relevant conditions

Microplastics have emerged as pervasive pollutants in aquatic environments, and their interaction with organic contaminants poses a significant environmental challenge. This study aimed to explore the adsorption of micropollutants onto microplastics in a river, examining different plastic materials and the effect of aging on adsorption capacity. Microplastics (low-density polyethylene (LDPE), polyethylene terephthalate (PET), and polyvinyl chloride (PVC)) were introduced into a river stream, and a comprehensive analysis involving 297 organic pollutants was conducted. Passive samplers were deployed to monitor micropollutant presence in the river. Sixty-four analytes were identified in the river flow, with telmisartan being the most prevalent. Nonaged PVC showed the highest telmisartan concentration at 279 ng/g (168 ng/m2 regarding the microplastic surface), while aged PVC exhibited a fourfold decrease. Conversely, aged LDPE preferentially adsorbed metoprolol and tramadol, with concentrations increasing 12- and 3-fold, respectively, compared to nonaged LDPE. Azithromycin and clarithromycin, positively charged compounds, exhibited higher sorption to PET microplastics, regardless of aging. Diclofenac showed higher concentrations on nonaged PVC compared to aged PVC. Aging induced structural changes in microplastics, including color alterations, smaller particle production, and increased specific surface area. These changes influenced micropollutant adsorption, with hydrophobicity, dissociation constants, and the ionic form of pollutants being key factors. Aged microplastics generally showed different sorption properties. A comparison of microplastics and control sand particles indicated preferential micropollutant sorption to microplastics, underscoring their role as vectors for contaminant transport in aquatic ecosystems. Analysis of river sediment emphasized the significance of contact time in pollutant accumulation. Overall, this study provides insights into the complex interactions between microplastics and organic pollutants under environmental conditions and contributes to a better understanding of the fate and behavior of these two types of contaminants in aquatic ecosystems.

Cotransport of 6PPD-Q and pristine/aged microplastics in porous media: An insight based on transport forms and mechanisms

The environmental fate and risks of microplastics (MPs) and their associated contaminants have attracted increasing concern in recent years. In this study, the cotransport of six kinds of pristine and aged MPs and the antiager ozonation product N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone (6PPD-Q) were investigated via a series of batch and transport experiments, and characteristic analysis (e.g., SEM, FTIR and XPS). Generally, pristine MPs exhibit higher adsorption ability than aged MPs due to the hydrophobic interaction. The 6PPD-Q usually exhibited both free moving and bond-MPs moving during transport process in presence of MPs, but none free 6PPD-Q was detected in presence of pristine PP MPs. The mobility of 6PPD-Q was generally facilitated in presence of MPs by bond-MPs moving due to the hydrogen bonding, halogen bonding, π-π interaction (the maximum total mass recovery of 84.11%), which efficiency was influenced with the combined effect of adsorption ability and mobility of MPs. The pristine PVC MPs showed highest facilitation on 6PPD-Q transport. The retained 6PPD-Q in porous media also was released by various MPs with different mass recovery ranged from 15.72% to 56.26% via surface moving of MPs around porous media. Both the dissolved and retained 6PPD-Q decreased the MPs mobility with the minimum mass recovery of 34.02%. Findings from this study contribute to the prediction and assessment of the combined risks of MPs and 6PPD-Q.

Coexposure to microplastic and Bisphenol A exhacerbates damage to human kidney proximal tubular cells

Microplastics (MPs) accumulate in tissues, including kidney tissue, while Bisphenol A (BPA) is a plasticizer of particular concern. At present, the combined effects of MPs and BPA are unexplored in human renal cells. Therefore, we exposed a proximal tubular cell line (PTECs) to polyethylene (PE)-MPs and BPA, both separately and in combination. When co-exposed, cells showed a significantly reduced cell viability (MTT test) and a pronounced pro-oxidant (MDA levels, NRF2 and NOX4 expression by Western blot) and pro-inflammatory response (IL1β, CCL/CCR2 and CCL/CCR5 mRNAs by RT-PCR), compared to those treated with a single compound. In addition, heat shock protein (HSP90), a chaperone involved in multiple cellular functions, was reduced (by Western Blot and immunocytochemistry), while aryl hydrocarbon receptor (AHR) expression, a transcription factor which binds environmental ligands, was increased (RT-PCR and immunofluorescence). Our research can contribute to the study of the nephrotoxic effects of pollutants and MPs and shed new light on the combined effects of BPA and PE-MPs.

Microplastics are effective carriers of bisphenol A and facilitate its escape from wastewater treatment systems

Microplastics (MPs) pollution is a major issue in aquatic environments. Wastewater treatment plants are significant point sources of MPs, which may also be carriers of organic pollutants. We analyzed MP number, shape, color, and polymer type distribution in sewage wastewater treatment plants. The potential of MPs to act as carriers for typical organic pollutants in sewage, such as bisphenol A (BPA), was also assessed. The predominant MPs in the influent were fibers, primarily transparent and black in color, and composed of polyethylene, polypropylene, and polystyrene. During wastewater treatment, the concentration of MPs decreased from 10.89 items per L in the influent to 0.89 items per L in the treated effluent, with significant differences in treatment efficiency at different stages. In the simulated wastewater, the three predominant MPs exhibited certain adsorption capacities for bisphenol A. Changing the temperature and pH within the range expected for wastewater could interfere with the interactions between MPs and bisphenol A, with a limited impact on adsorption. The results show that although wastewater treatment plants intercept a significant amount of MP, a considerable number of them enter the aquatic environment daily because of the high volume of wastewater discharge. These MPs, which carry pollutants such as bisphenol A, may threaten the health of fish and other aquatic organisms. However, by scientifically adjusting operational parameters, wastewater treatment plants could become "controllable sources" of MP compound pollutants.

When microplastics/plastics meet metal-organic frameworks: turning threats into opportunities

Significant efforts have been devoted to removal and recycling of microplastics (MPs; <5 mm) to address the environmental crises caused by their ubiquitous presence and improper treatment. Metal-organic frameworks (MOFs) demonstrate compatibility with MPs/plastics through adsorption, degradation, or assembly with the MPs/plastic polymers. Above 90% of MPs/plastic particles can be adsorbed on MOF materials via the hydrophobic interaction, electrical attraction, π-π stacking, and van der Waals forces. Meanwhile, certain MOFs have successfully converted various types of plastics into high-valued small molecules through thermocatalysis and photocatalysis. In thermocatalysis, the primary process should be C-O bond cleavage, whereas in photocatalysis it ought to be the generation of reactive oxygen species (ROS). Moreover, the construction of novel MOFs using waste MPs/plastics as the ligands was mostly accomplished through three dominant ways, including glycolysis, hydrolysis and methanolysis. Once successfully composited, the MOF@plastic materials illustrated tremendous promise for interdisciplinary research in multifunctional applications, including sewage treatment, gas adsorption/separation, and the preparation of microbial fuel cells, plastic scintillators and other sensors. The review explicated the relationships between MPs/plastics and MOF materials, as well as the challenges and perspectives for their development. It can provide a deeper understanding of how MOFs remove/degrade MP/plastic particles, how MPs/plastics are recycled to prepare MOFs, and how to build multifunctional MOF@plastic composites. Overall, this analysis is anticipated to outline future prospects for turning the threats (MPs/plastics contamination) into opportunities (e.g., as ligands to prepare MOF or MOF@plastic materials for further applications).

Prenatal exposure to bisphenol AF causes toxicities in liver, spleen, and kidney tissues of SD rats

As a replacement for bisphenol A (BPA), bisphenol AF (BPAF) showed stronger maternal transfer and higher fetal accumulation than BPA. Therefore, concerns should be raised about the health risks of maternal exposure to BPAF during gestation on the offspring. In this study, SD rats were exposed to BPAF (0, 50, and 100 mg/kg/day) during gestation to investigate the bioaccumulation and adverse effects in liver, spleen, and kidney tissues of the offspring at weaning period. Bioaccumulation of BPAF in these tissues with concentrations ranging from 1.56 ng/mg (in spleen of males) to 55.44 ng/mg (in liver of females) led to adverse effects at different biological levels, including increased relative weights of spleen and kidneys, histopathological damage in liver, spleen, and kidney, organ functional damage in liver, spleen, and kidney, upregulated expression of genes related to lipid metabolism (in liver), oxidative stress response (in kidney), immunity and inflammatory (in spleen). Furthermore, dysregulated metabolomics was identified in spleen, with 217 differential metabolites screened and 9 KEGG pathways significantly enriched. This study provides a comprehensive insight into the systemic toxicities of prenatal exposure to BPAF in SD rats. Given the broad applications and widespread occurrence of BPAF, its safety should be re-considered.

Determination of Bisphenol Compounds and the Bioaccumulation after Co-Exposure with Polyethylene Microplastics in Zebrafish

Knowledge regarding the combined toxicity mechanism of bisphenol compounds and microplastics (MPs) on organisms remains limited. In this study, we first developed an accurate and sensitive method to simultaneously quantify two bisphenol compounds and evaluate their accumulation and tissue distribution after co-exposure with MPs in zebrafish. Then, we determined the bioaccumulation potential of bisphenol A (BPA) and bisphenol S (BPS) in adult zebrafish in the absence and presence of MPs. Bisphenol compounds were found to accumulate in different tissues of zebrafish, with BPS showing lower accumulation levels compared to BPA. Importantly, we discovered that the presence of MPs could exacerbate the accumulation of bisphenol compounds in biological tissues. These findings highlight the enhanced bioavailability and risk posed by the co-exposure of bisphenol compounds and MPs, underscoring the need for further investigation into their combined environmental and biological health impacts.

Investigation of interaction mechanism between polyvinyl chloride microplastics and phthalate acid esters using APGC-MS/MS

Phthalate acid esters (PAEs) are a kind of typical endocrine disruptors chemicals (EDCs). PAEs can be enriched, migrated and released into organisms through microplastics (MPs), causing high toxicological risks. This study presented an atmospheric pressure gas chromatography-tandem mass spectrometry (APGC-MS/MS) method for 10 PAEs trace analysis. Based on this method, the interaction mechanism between polyvinyl chloride microplastics (PVC MPs) and PAEs was explored. The established APGC-MS/MS method achieved 10 PAEs analysis in 14 min with the satisfied detection limit as low as 0.0025 μg/L and excellent linearity (R2 = 0.99868-0.99996). The interaction mechanism investigation showed that PVC MPs had high adsorption and desorption capacities for PAEs. The adsorption mechanism involves adsorption distribution, surface adsorption, hydrophobic interaction and intermolecular van der Waals force. Temperature, diffusion channels, pore filling, hydrophobicity and solubilization may be potential desorption mechanisms. Moreover, the intestinal environment of warm-blood organisms has the highest bioavailability of PAEs. Overall, this APGC-MS/MS method of PAEs had the virtue of simplicity, efficiency, reliability and sensitivity, and could serve as a potential tool for risk analysis of MPs and PAEs exposure.

Polyamide 6 microplastics as carriers led to changes in the fate of bisphenol A and dibutyl phthalate in drinking water distribution systems: The role of adsorption and interfacial partitioning

Microplastics (MPs) co-exist with plastic additives and other emerging pollutants in the drinking water distribution systems (DWDSs). Due to their strong adsorption capacity, MPs may influence the occurrence of additives in DWDSs. The article investigated the occurrence of typical additives bisphenol A (BPA) and dibutyl phthalate (DBP) in DWDSs under the influence of polyamide 6 (PA6) MPs and further discussed the partitioning of BPA/DBP on PA6s, filling a research gap regarding the impact of adsorption between contaminants on their occurrence within DWDSs. In this study, adsorption experiments of BPA/DBP with PA6s and pipe scales were conducted and their interaction mechanisms were investigated. Competitive adsorption experiments of BPA/DBP were also carried out with site energy distribution theory (SEDT) calculations. The results demonstrated that PA6s might contribute to the accumulation of BPA/DBP on pipe scales. The adsorption efficiencies of BPA/DBP with both PA6s and pipe scales were 26.47 and 2.61 times higher than those with only pipe scales. It was noteworthy that BPA had a synergistic effect on the adsorption of DBP on PA6s, resulting in a 26.47 % increase in DBP adsorption. The article provides valuable insights for the compounding effect of different types of additives in water quality monitoring and evaluation.

Combined toxicity of pristine or artificially aged tire wear particles and bisphenols to Tigriopus japonicus

Tire wear particles (TWPs) are considered an important component of microplastic pollution in the marine environment and occur together with a variety of aquatic pollutants, including frequently detected bisphenols. The adverse effects of TWPs or bisphenols on aquatic organisms have been widely reported. However, the combined toxicity of TWPs and bisphenols is still unknown. In this study, the combined toxicity of both pristine (p-) and aged TWPs (a-TWPs) and four bisphenols ((bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF)) to Tigriopus japonicus was evaluated. TWPs increased the toxicity of BPA and BPF but decreased the toxicity of BPAF. For BPS, there was synergistic toxic effect in the presence of p-TWPs, but slightly antagonistic effect was observed in the presence of a-TWPs. This adsorption of BPAF by TWPs resulted in a reduction of its toxicity to the copepod. A-TWPs could release more Zn than p-TWPs, and the released Zn contributed to the synergistic effect of TWPs and BPA or BPF. The aggregation formed by TWPs in certain sizes (e.g., 90-110 μm) could cause intestinal damage and lipid peroxidation in T. japonicus. The synergistic effect of p-TWPs and BPS might be due to the aggregation size of the binary mixture. The results of the current study will be important to understand the combined toxic effect of TWPs and bisphenols and the potential toxic mechanisms of the binary mixture.

Unraveling the effects of acrylonitrile butadiene styrene (ABS) microplastic ageing on the sorption and toxicity of ionic liquids with 2,4-D and glyphosate herbicides

Microplastics represent a novel category of environmental pollutants, and understanding their interactions with typical xenobiotics is crucial. In this study, we investigated the impact of ionic liquids (ILs) containing herbicidal anions, namely glyphosate [Glyph] and 2,4-dichlorophenoxyacetate [2,4-D], and the surfactant cation - dodecyltrimethylammonium [C12TMA] on acrylonitrile butadiene styrene (ABS) microplastics. The aim of the study was to assess the sorption capacity of microplastics that were present in both untreated and aged form using standard and modified Fenton methods. In addition, impact on toxicity and stress adaptation of the model soil bacterium Pseudomonas putida KT2440 was measured. Upon ageing, ABS microplastics underwent a fivefold increase in BET surface area and total pore volume (from 0.001 to 0.004 cm3/g) which lead to a dramatic increase in adsorption of the cations on ABS microplastics from 40 to 45% for virgin ABS to 75-80% for aged ABS. Toxicity was mainly attributed to hydrophobic cations in ILs (EC50 ∼ 60-65 mg/dm3), which was also mitigated by sorption on ABS. Furthermore, both cations and anions behaved similarly across different ILs, corresponding chlorides, and substrates used in the ILs synthesis. These findings highlight microplastics potential as hazardous sorbents, contributing to the accumulation of xenobiotics in the environment.

Adsorption behavior and mechanism of different types of (aged) microplastics for napropamide in soils

The role of microplastics (MPs) as pollutant carriers and their influence on the fate of organic pollutants has received considerable attention. However, the impacts of MPs on the adsorption of amide herbicides in soil, have not been investigated. In this study, non-biodegradable (polyethylene, PEM) and biodegradable (polybutylene adipate terephthalate, PBATM) MPs were aged by exposure to one month of ultraviolet irradiation. The impacts of MPs on the adsorption of napropamide (Nap) in two agricultural soils (black soil [BS] and fluvo-aquic soil [CS]) were investigated through batch experiments. The findings suggested that the adsorption of Nap onto PEM was mainly governed by physical processes, while, chemical mechanisms, should not be overlooked on PBATM. With the addition of 0.2% MPs, the maximum adsorption capacity (Qm) and adsorption distribution coefficient (KF) of soil containing PEM (soil-PEM) were higher than that of soil-PBATM, however, the Qm and KF values of soil-PBATM for Nap were higher when the addition of MPs was 2%. After UV aging, the increased specific surface area of MPs led to an increased adhesion of soil particles. These were attributed to the different surface properties and concentrations of different (aged) MPs, resulting in differences in the inhibition effect by soil particles. The adhesion of soil particles was confirmed by X-ray photoelectron spectroscopy. Additionally, regardless of the addition of MPs, the Qm values of BS for Nap were higher than those for CS. In summary, MPs can alter the adsorption of Nap in soil, influencing both its mobility within the soil ecosystem and the environmental risk.

Exploring adsorption dynamics of heavy metals onto varied commercial microplastic substrates: Isothermal models and kinetics analysis

The increasing presence of plastics in the environment has raised concerns about their potential impact, especially as carriers of heavy metals such as Cd, Ni, and Pb. However, the adsorption mechanism of heavy metals on microplastics remains poorly understood. In this study, we investigated the adsorption behavior of Cd, Ni, and Pb by polystyrene (PS) and polypropylene (PP) microplastics to better comprehend their interaction and potential environmental implications. Our results revealed that equilibrium adsorption of microplastics with different heavy metals was achieved within a 6-h contact time. The FTIR analysis findings, which suggest that physical interactions play a significant role in the adsorption of heavy metals onto microplastics, are further supported by the observed changes in surface morphology after adsorption. We explored the influence of solution pH, contact duration, and initial concentration on the adsorption capacity and found significant effects on the adsorption behavior. To model the adsorption process, we applied Langmuir and Freundlich adsorption isotherm models and observed that the Langmuir model better fit the experimental data. Furthermore, we compared the pseudo-first and pseudo-second-order kinetic models and found that the pseudo-second-order model provided a more accurate description of the adsorption kinetics. Notably, the adsorption percentages varied depending on the type of microplastic and experimental conditions. Overall, this study enhances our understanding of the adsorption mechanism of heavy metals on microplastics and provides valuable insights into their behavior in aquatic environments. These findings have implications for the development of effective strategies for mitigating pollution caused by microplastics and heavy metals in aquatic ecosystems.

Colonization characteristics and surface effects of microplastic biofilms: Implications for environmental behavior of typical pollutants

This paper summarizes the colonization dynamics of biofilms on microplastics (MPs) surfaces in aquatic environments, encompassing bacterial characteristics, environmental factors affecting biofilm formation, and matrix types and characteristics. The interaction between biofilm and MPs was also discussed. Through summarizing recent literatures, it was found that MPs surfaces offer numerous benefits to microorganisms, including nutrient enrichment and enhanced resistance to environmental stress. Biofilm colonization changes the surface physical and chemical properties as well as the transport behavior of MPs. At the same time, biofilms also play an important role in the fragmentation and degradation of MPs. In addition, we also investigated the coexistence level, adsorption mechanism, enrichment, and transformation of MPs by environmental pollutants mediated by biofilms. Moreover, an interesting aspect about the colonization of biofilms was discussed. Biofilm colonization not only had a great effect on the accumulation of heavy metals by MPs, but also affects the interaction between particles and environmental pollutants, thereby changing their toxic effects and increasing the difficulty of MPs treatment. Consequently, further attention and research are warranted to delve into the internal mechanisms, environmental risks, and the control of the coexistence of MPs and biofilms.

Using artificial intelligence to rapidly identify microplastics pollution and predict microplastics environmental behaviors

With the massive release of microplastics (MPs) into the environment, research related to MPs is advancing rapidly. Effective research methods are necessary to identify the chemical composition, shape, distribution, and environmental impacts of MPs. In recent years, artificial intelligence (AI)-driven machine learning methods have demonstrated excellent performance in analyzing MPs in soil and water. This review provides a comprehensive overview of machine learning methods for the prediction of MPs for various tasks, and discusses in detail the data source, data preprocessing, algorithm principle, and algorithm limitation of applied machine learning. In addition, this review discusses the limitation of current machine learning methods for various task analysis in MPs along with future prospect. Finally, this review finds research potential in future work in building large generalized MPs datasets, designing high-performance but low-computational-complexity algorithms, and evaluating model interpretability.

Co-exposure to microplastic and plastic additives causes development impairment in zebrafish embryos

Since the run off of microplastic and plastic additives into the aquatic environment through the disposal of plastic products, we investigated the adverse effects of co-exposure to microplastics and plastic additives on zebrafish embryonic development. To elucidate the combined effects between microplastic mixtures composed of microplastics and plastic additives in zebrafish embryonic development, polystyrene (PS), bisphenol S (BPS), and mono-(2-ethylhexyl) phthalate (MEHP) were chosen as a target contaminant. Based on non-toxic concentration of each contaminant in zebrafish embryos, microplastic mixtures which is consisted of binary and ternary mixed forms were prepared. A strong phenotypic toxicity to zebrafish embryos was observed in the mixtures composed with non-toxic concentration of each contaminant. In particular, the mixture combination with ≤ EC10 values for BPS and MEHP showed a with a strong synergistic effect. Based on phenotypic toxicity to zebrafish embryos, change of transcription levels for target genes related to cell damage and thyroid hormone synthesis were analyzed in the ternary mixtures with low concentrations that were observed non-toxicity. Compared with the control group, cell damage genes linked to the oxidative stress response and thyroid hormone transcription factors were remarkably down-regulated in the ternary mixture-exposed groups, whereas the transcriptional levels of cyp1a1 and p53 were significantly up-regulated in the ternary mixture-exposed groups (P < 0.05). These results demonstrate that even at low concentrations, exposure to microplastic mixtures can cause embryonic damage and developmental malformations in zebrafish, depending on the mixed concentration-combination. Consequently, our findings will provide data to examine the action mode of zebrafish developmental toxicity caused by microplastic mixtures exposure composed with microplastics and plastic additives.

Exploring the co-exposure effects of environmentally relevant microplastics and an estrogenic mixture on the metabolome of the Sydney rock oyster

In aquatic environments the concurrent exposure of molluscs to microplastics (MPs) and estrogens is common, as these pollutants are frequently released by wastewater treatment plants into estuaries. Therefore, this study aimed to evaluate the independent and co-exposure impacts of polyethylene microplastics (PE-MPs) and estrogenic endocrine-disrupting chemicals (EEDCs) at environmentally relevant concentrations on polar metabolites and morphological parameters of the Sydney rock oyster. A seven-day acute exposure revealed no discernible differences in morphology; however, significant variations in polar metabolites were observed across oyster tissues. The altered metabolites were mostly amino acids, carbohydrates and intermediates of the Kreb's cycle. The perturbation of metabolites were tissue and sex-specific. All treatments generally showed an increase of metabolites relative to controls - a possible stimulatory and/or a potential hormetic response. The presence of MPs impeded the exposure of adsorbed and free EEDCs potentially due to the selective feeding behaviour of oysters to microplastics, favouring algae over similar-sized PE-MPs, and the formation of an eco/bio-corona involving faeces, pseudo-faeces, natural organic matter, and algae.

Interaction of microplastics with perfluoroalkyl and polyfluoroalkyl substances in water: A review of the fate, mechanisms and toxicity

It is well known that microplastics can act as vectors of pollutants in the environment and are widely spread in freshwater and marine environments. PFAS (perfluoroalkyl and polyfluoroalkyl substances) can remain in the aqueous environment for long periods due to their wide application and good stability. The coexistence of microplastics and PFAS in the aqueous environment creates conditions for their interaction and combined toxicity. Studies on adsorption experiments between them and combined toxicity have been documented in the literature but have not been critically summarized and reviewed. Therefore, in this review, we focused on the interaction mechanisms, influencing factors, and combined toxicity between microplastics and PFAS. It was found that surface complexation may be a new interaction mechanism between microplastics and PFAS. In addition, aged microplastics reduce the adsorption of PFAS due to the presence of oxygenated groups on the surface compared to virgin microplastics. Attached biofilms can increase the adsorption capacity and create conditions for biodegradation. And, the interaction of microplastics and PFAS affects their spatial and temporal distribution in the environment. This review can provide insights into the fate of microplastics and PFAS in the global aquatic environment, fill knowledge gaps on the interactions between microplastics and PFAS, and provide a basic reference for assessing their combined toxicity.

Water transfer projects and microplastics: Analyzing changes in lake environments with a focus on Wabu Lake, China

Microplastics are widespread in freshwaters, yet their interaction with navigational structures remains unclear. This study compared the distribution and characteristics of microplastics before and after navigation in Wabu Lake. Microplastic concentrations decreased significantly in both surface water and sediment due to navigation opened, from 13.7 ± 6.56 to 3.12 ± 1.8 p L-1 (p < 0.001) and from 568 ± 286 to 174 ± 60.2 p kg-1 (p < 0.001), respectively. Acrylates copolymer was frequently detected in surface water and sediment before navigation, whereas the dominant polymer after navigation was chlorinated polyisoprene in surface water and chlorinated polyethylene in sediment. The results showed that three-years dredging induced relatively severe microplastic pollution before navigation, however, these microplastics were apparently eliminated after navigation, as the distribution and characteristics of microplastics thoroughly varied. This study provides a valuable finding that microplastic transport process can be facilitated by water transfer project, which should be considered for preventing microplastic pollution.

Microplastics supply contaminants in food chain: non-negligible threat to health safety

The occurrence of microplastics (MPs) and organic pollutants (OPs) residues is commonly observed in diverse environmental settings, where their interactions can potentially alter the behavior, availability, and toxicity of OPs, thereby posing risks to ecosystems. Herein, we particularly emphasize the potential for bioaccumulation and the biomagnification effect of MPs in the presence of OPs within the food chain. Despite the ongoing influx of novel information, there exists a dearth of data concerning the destiny and consequences of MPs in the context of food pollution. Further endeavors are imperative to unravel the destiny and repercussions of MPs/OPs within food ecosystems and processing procedures, aiming to gain a deeper understanding of the joint effect on human health and food quality. Nevertheless, the adsorption and desorption behavior of coexisting pollutants can be significantly influenced by MPs forming biofilms within real-world environments, including temperature, pH, and food constituents. A considerable portion of MPs tend to accumulate in the epidermis of vegetables and fruits, thus necessitating further research to comprehend the potential ramifications of MPs on the infiltration behavior of OPs on agricultural product surfaces.

Entry pathways determined the effects of MPs on sludge anaerobic digestion system: The views of methane production and antibiotic resistance genes fates

Sludge is one of the primary reservoirs of microplastics (MPs), and the effects of MPs on subsequent sludge treatment raised attention. Given the entry pathways, MPs would exhibit different properties, but the entry pathway-dependent effect of MPs on sludge treatment performance and the fates of antibiotic resistance genes (ARGs), another high-risk emerging contaminant, were seldom documented. Herein, MPs with two predominant entry pathways, including wastewater-derived (WW-derived) and anaerobic digestion-introduced (AD-introduced), were used to investigate the effects on AD performance and ARGs abundances. The results indicated that WW-derived MPs, namely the MPs accumulated in sludge during the wastewater treatment process, exhibited significant inhibition on methane production by 22.8%-71.6%, while the AD-introduced MPs, being introduced in the sludge AD process, slightly increased the methane yield by 4.7%-17.1%. Meanwhile, MPs were responsible for promoting transmission of target ARGs, and polyethylene terephthalate MPs (PET-MPs) showed a greater promotion effect (0.0154-0.0936) than polyamide MPs (PA-MPs) (0.0013-0.0724). Compared to size, entry pathways and types played more vital roles on MPs influences. Investigation on mechanisms based on microbial community structure revealed characteristics (aging degree and types) of MPs determined the differences of AD performance and ARGs fates. WW-derived MPs with longer aging period and higher aging degree would release toxics and decrease the activities of microorganisms, resulting in the negative impact on AD performance. However, AD-introduced MPs with short aging period exhibited marginal impacts on AD performance. Furthermore, the co-occurrent network analysis suggested that the variations of potential host bacteria induced by MPs with different types and aging degree attributed to the dissemination of ARGs. Distinctively from most previous studies, the MPs with different sizes did not show remarkable effects on AD performance and ARGs fates. Our findings benefited the understanding of realistic environmental behavior and effect of MPs with different sources.

Photochemically induced aging of polystyrene nanoplastics and its impact on norfloxacin adsorption behavior

The co-occurrence of nanoplastics (NPs) and antibiotics in the environment is a growing concern for ecological safety. As NPs age in natural environments, their surface properties and morphology may change, potentially affecting their interactions with co-contaminants such as antibiotics. It is crucial to understand the effect of aging on NPs adsorption of antibiotics, but detailed studies on this topic are still scarce. The study utilized the photo-Fenton-like reaction to hasten the aging of polystyrene nanoplastics (PS-NPs). The impact of aging on the adsorption behavior of norfloxacin (NOR) was then systematically examined. The results showed a time-dependent rise in surface oxygen content and functional groups in aged PS-NPs. These modifications led to noticeable physical changes, including increased surface roughness, decreased particle size, and improved specific surface area. The physicochemical changes significantly increased the adsorption capacity of aged PS-NPs for norfloxacin. Aged PS-NPs showed 5.03 times higher adsorption compared to virgin PS-NPs. The adsorption mechanism analysis revealed that in addition to the electrostatic interactions, van der Waals force, hydrogen bonding, π-π* interactions and hydrophobic interactions observed with virgin PS-NPs, aged PS-NPs played a significant role in polar interactions and pore-filling mechanisms. The study highlights the potential for aging to worsen antibiotic risk in contaminated environments. This study not only enhances the comprehension of the environmental behavior of aged NPs but also provides a valuable basis for developing risk management strategies for contaminated areas.

A QSAR prediction model for adsorption of organic contaminants on microplastics: Dubinin-Astakhov plus linear solvation energy relationships

Numerous pharmaceuticals and personal care products (PPCPs) co-exist with various types of microplastics (MPs) in the environment, making it extremely hard to experimentally measure all their adsorption interactions. Thus, a precise prediction model is on demand. In this study, we combined the commonly used Dubinin-Astakhov (DA) model and the linear solvation energy relationships (LSERs) model to predict the adsorption capacity (Q0) and adsorption affinity (E) of MPs for PPCPs, including the key parameters of MP (specific surface area, oxygen-containing functional groups), and the Kamlet-Taft solvation parameters of organic contaminants. The model was validated with the experimental data of 8 PPCPs and 8 MPs (i.e. pristine and aged PE, PET, PS, PVC) plus some published adsorption data. This new model also indicated that the adsorption of PPCPs on those MPs was primarily governed by hydrophobic interaction and hydrogen bonding. The developed model can predict the adsorption of PPCPs onto MPs with a high accuracy and can also provide insights into the understanding of interaction forces in the adsorption process.

Synergistic impact of nanoplastics and nanopesticides on Artemia salina and toxicity analysis

Polystyrene nanoplastics (PSNPs) when exposed to nanopermethrin (NPER) exacerbate toxicity on Artemia salina. In the environment, NPs act as a vector for other pollutants mainly heavy metals and pesticides. Nanopesticides are efficient compared to their bulk form. The adsorption of NPER on PSNPs was studied systematically and it was found that the binding of NPER is inversely proportional to its concentration. NPER adsorption on PSNPs followed pseudo-first-order kinetics with an adsorption percentage of 1.7%, 3.7%, 7.7%, 15.4%, and 30.8% when PSNPs were incubated with 2 mg L-1,4 mg L-1, 8 mg L-1, 16 mg L-1, and 32 mg L-1 of NPER. The adsorption followed the Langmuir isotherm. The increased hydrodynamic size of the NPER/PSNP complex was observed. Different characterization studies were performed for NPER, PSNPs, and their complex using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray diffraction, and gas chromatography-mass spectrometry. The LC50 value for the NPER/PSNP complex treated with Artemia salina was 3.127 mg L-1, compared to LC50 NPER which was found to be 4.536 mg L-1. PSNPs had a lower mortality rate in Artemia salina, where 50% mortality (LC50) was not observed at their working concentration. Both the nanoforms led to morphological changes in Artemia salina. Reactive oxygen species increased to 87.94% for the NPER/PSNP complex, 78.93% for NPER, and 23.65% for PSNPs. Greater amounts of ROS in the cells may have led to SOD degradation. Superoxide dismutase activity for the NPER/PSNP complex was 1.2 U mg-1, NPER was 1.3 U mg-1, and PSNPs was 2.1 U mg-1. A lipid peroxidation study reveals that the melondialdehyde synthesis by NPER/PSNPs complex, NPER and PSNPs were found to be 2.21 nM mg-1, 1.59 nM mg-1, and 0.91 nM mg-1 respectively. Catalase activity in a complex of NPER/PSNPs, NPER, and PSNPs was found to be 1.25 U mg-1, 0.94 U mg-1, and 0.49 U mg-1. This study envisages the individual and combined toxicity of nanopesticides and PSNPs on aquatic organisms. Increased plastic usage and new-age chemicals for agriculture could result in the formation of a PSNPs-NPER complex potentially causing highly toxic effects on aquatic animals, compared to their pristine forms. Therefore, we should also consider the other side of nanotechnology in agriculture.

Insights into the effect of crystallinity on the sorption of organic pollutants to microplastics

The environmental behavior of microplastics (MPs) has attracted global attention. Research has confirmed that MPs can strongly absorb almost every kind of pollutant and can serve as vectors for pollutant transport. In this research, the sorption isotherms of six organic pollutants with different structure on four virgin plastic particles with different crystallinity were determined. Results indicated that the hydrophobicity (KOW) of organic pollutants and the crystallinity of MPs were the two key factors that affected the sorption process of organic pollutants on MPs. Strong correlations were observed between KOW and the partition coefficient. Hydrophobic partition was one of the major mechanisms regardless of the type of organic chemical (hydrophobic, polar, or dissociable). What is more, the influence of the crystallinity of MPs on the sorption process increased with increasing hydrophobicity of the chemical. Combining this result with analyzing the related literature on the effect of crystallinity, it was concluded that the effect of crystallinity on the sorption of chemicals with strong hydrophobicity was obvious, whereas this effect was negligible for chemicals with weak hydrophobicity. The influence of the crystallinity of MPs on sorption could even exceed the influence of MPs type, so crystallinity should be considered carefully when discussing the sorption capacity of MPs. This study enhances the understanding of the sorption of organic pollutants by MPs.

Cotransport of nanoplastics and plastic additive bisphenol AF (BPAF) in unsaturated hyporheic zone: Coupling effects of surface functionalization and protein corona

The ecological risk of combined pollution from microplastics (MPs) and associated contaminants usually depends on their interactions and environmental behavior, which was also disturbed by varying surface modifications of MPs. In this study, the significance of surface functionalization and protein-corona on the cotransport of nanoplastics (NPs; 100 nm) and the related additive bisphenol AF (BPAF) was examined in simulated unsaturated hyporheic zone (quartz sand; 250-425 μm). The electronegative bovine serum albumin (BSA) and electropositive trypsin were chosen as representative proteins, while pristine (PNPs), amino-modified (ANPs), and carboxyl-modified NPs (CNPs) were representative NPs with different charges. The presence of BPAF inhibited the mobility of PNPs/CNPs, but enhanced the release of ANPs in hyporheic zone, which was mainly related to their hydrophobicity changes and electrostatic interactions. Meanwhile, the NPs with high mobility and strong affinity to BPAF became effective carriers, promoting the cotransport of BPAF by 16.4 %-26.4 %. The formation of protein-coronas altered the mobility of NPs alone and their cotransport with BPAF, exhibiting a coupling effect with functional groups. BSA-corona promoted the transport of PNPs/CNPs, but this promoting effect was weakened by the presence of BPAF via increasing particle aggregation and hydrophobicity. Inversely, trypsin-corona aggravated the deposition of PNPs/CNPs, but competition deposition sites and increased energy barrier caused by coexisting BPAF reversed this effect, facilitating the cotransport of trypsin-PNPs/CNPs in hyporheic zone. However, BPAF and protein-coronas synergistically promoted the mobility of ANPs, owing to competition deposition sites and decreased electrostatic attraction. Although all of the NPs with two protein-coronas reduced dissolved BPAF in the effluents via providing deposition sites, the cotransport of total BPAF was improved by the NPs with high mobility (BSA-PNPs/CNPs) or high affinity to BPAF (BSA/trypsin-ANPs). However, the trypsin-PNPs/CNPs inhibited the transport of BPAF due to their weak mobility and adsorption with BPAF. The results provide new insights into the role of varying surface modifications on NPs in the vertical cotransport of NPs and associated contaminants in unsaturated hyporheic zone.

Association of tetrabromobisphenol A (TBBPA) with micro/nano-plastics: A review of recent findings on ecotoxicological and health impacts

Despite the diverse research into the environmental impact of plastics, several stones have yet to be unraveled in terms of their ecotoxicological potential. Moreover, their detrimental impacts have become terrifying in recent years as the understanding of their tendency to associate and form cohorts with other emerging contaminants grew. Despite the hypothesis that microplastics may potentially adsorb organic pollutants, sequestering and making them not bioavailable for enhanced toxicity, evidence with pollutants such as Tetrabromobisphenol A (TBBPA) defers this assertion. TBBPA, one of the most widely used brominated flame retardants, has been enlisted as an emerging contaminant of serious environmental and human health concerns. Being also an additive to plasticware, it is not far to suspect that TBBPA could be found in association with micro/nanoplastics in our environment. Several pieces of evidence from recent studies have confirmed the micro/nanoplastics-TBBPA association and have exposed their compounded detrimental impacts on the environment and human health. This study, therefore, presents a comprehensive and up-to-date review of recent findings regarding their occurrence, factors that foster their association, including their sorption kinetics and isotherms, and their impacts on aquatic/agroecosystem and human health. The way forward and prospects for future studies were presented. This research is believed to be of significant interest to the readership due to its relevance to current environmental challenges posed by plastics and TBBPA. The study not only contributes valuable insights into the specific interaction between micro/nanoplastics and TBBPA but also suggests the way forward and prospects for future studies in this field.

How do polystyrene microplastics affect the adsorption of copper in soil?

Microplastics (MPs) commonly coexist with heavy metals in the soil environment. MPs can influence the activity of heavy metals, and the specific mechanisms need to be further explored. Here, different contents of polystyrene (PS) MPs were added to soil to explore their effects on the adsorption and desorption characteristics of copper (Cu2+) in soil. The adsorption process was mainly chemical adsorption and belonged to a spontaneous, endothermic reaction. The hydrophobicity of MPs slowed down the adsorption and desorption rates. The main adsorption mechanisms included complexation by oxygen-containing functional groups, ion exchange (accounting for 33.97-36.04 % of the total adsorption amounts), and electrostatic interactions. MPs lacked oxygen-containing functional groups and were predominantly engaged in ion exchange and electrostatic interactions. MPs diluted, blocked the soil, and covered the active sites of soil, which reduced adsorption (3.56-16.18 %) and increased desorption (0.90-2.07 %) of Cu2+ in soil samples, thus increasing the activity and mobility of Cu2+. These findings provide new insights into the effects of MPs on the fate and risk of heavy metals in soil. ENVIRONMENTAL IMPLICATION: The existing literature concerning the effects of microplastics on the adsorption of heavy metals in soil is insufficient. Our investigation unveiled that the main adsorption mechanisms of different soil samples included complexation by oxygen-containing functional groups, ion exchange (accounting for 33.97-36.04 % of the total adsorption amounts), and electrostatic interactions. MPs lacked oxygen-containing functional groups and were predominantly engaged in ion exchange and electrostatic interactions. MPs diluted, blocked the soil, and covered the active sites of soil, which reduced adsorption (3.56-16.18 %) and increased desorption (0.90-2.07 %) of Cu2+ in soil samples, thus increasing the activity and mobility of Cu2+.

Evaluating effects of tetrabromobisphenol A and microplastics on anaerobic granular sludge: Physicochemical properties, microbial metabolism, and underlying mechanisms

Tetrabromobisphenol A (TBBPA) and microplastics are emerging contaminants of widespread concern. However, little is known about the effects of combined exposure to TBBPA and microplastics on the physicochemical properties and microbial metabolism of anaerobic granular sludge. This study investigated the effects of TBBPA, polystyrene microplastics (PS MP) and polybutylene succinate microplastics (PBS MP) on the physicochemical properties, microbial communities and microbial metabolic levels of anaerobic granular sludge. The results showed that chemical oxygen demand (COD) removal of sludge was lowest in the presence of TBBPA alone and PS MP alone with 33.21% and 30.06%, respectively. The microorganisms promoted the secretion of humic substances under the influence of TBBPA, PS MP and PBS MP. The lowest proportion of genes controlling glycolytic metabolism in sludge was 1.52% when both TBBPA and PS MP were added. Microbial reactive oxygen species were increased in anaerobic granular sludge exposed to MPS. In addition, TBBPA treatment decreased electron transfer of the anaerobic granular sludge and disrupted the pathway of anaerobic microorganisms in acquiring adenosine triphosphate, and MPs attenuated the negative effects of TBBPA on the acetate methanogenesis process of the anaerobic granular sludge. This study provides a reference for evaluating the impact of multiple pollutants on anaerobic granular sludge.

Biofilm enhances the interactive effects of microplastics and oxytetracycline on zebrafish intestine

The enhanced adsorption of pollutants on biofilm-developed microplastics has been proved in many studies, but the ecotoxicological effects of biofilm-developed microplastics on organisms are still unclear. In this study, adult zebrafish were exposed to original microplastics, biofilm-developed microplastics, original microplastics absorbed with oxytetracycline (OTC), and biofilm-developed microplastics absorbed with OTC for 30 days. The intestinal histological damage, intestinal biomarker response, gut microbiome and antibiotic resistance genes (ARGs) profile of zebrafish were measured to explore the roles of biofilm in the effects of microplastics. The results showed that biofilm-developed microplastics significantly increased the number of goblet cells in intestinal epithelium compared with the control group. The biofilm-developed microplastics also induced the oxidative response in the zebrafish intestines, and biofilm changed the response mode in the combined treatment with OTC. Additionally, the biofilm-developed microplastics caused intestinal microbiome dysbiosis, and induced the abundance of some pathogenic genera increasing by several times compared with the control group and the original microplastics treatments, regardless of OTC adsorption. Furthermore, the abundance of ARGs in biofilm-developed microplastics increased significantly compared with the control and the original microplastic treatments. This study emphasized the significant influence and unique role of biofilm in microplastic studies.

A novel mycelial pellet applied to remove polycyclic aromatic hydrocarbons: High adsorption performance & its mechanisms

Mycelial pellets formed by Penicillium thomii ZJJ were applied as efficient biosorbents for the removal of polycyclic aromatic hydrocarbons (PAHs), which are a type of ubiquitous harmful hydrophobic pollutants. The live mycelial pellets were able to remove 93.48 % of pyrene at a concentration of 100 mg/L within 48 h, demonstrating a maximum adsorption capacity of 285.63 mg/g. Meanwhile, the heat-killed one also achieved a removal rate of 65.01 %. Among the six typical PAHs (pyrene, phenanthrene, fluorene, anthracene, fluoranthene, benzo[a]pyrene), the mycelial pellets preferentially adsorbed the high molecular weight PAHs, which also have higher toxicity, resulting in higher removal efficiency. The experimental results showed that the biosorption of mycelial pellets was mainly a spontaneous physical adsorption process that occurred as a monolayer on a homogeneous surface, with mass transfer being the key rate-limiting step. The main adsorption sites on the surface of mycelia were carboxyl and N-containing groups. Extracellular polymeric substances (EPS) produced by mycelial pellets could enhance adsorption, and its coupling with dead mycelia could achieve basically the same removal effect to that of living one. It can be concluded that biosorption by mycelial pellets occurred due to the influence of electrostatic and hydrophobic interactions, consisting of five steps. Furthermore, the potential applicability of mycelial pellets has been investigated considering diverse factors. The mycelia showed high environmental tolerance, which could effectively remove pyrene across a wide range of pH and salt concentration. And pellets diameters and humic acid concentration had a significant effect on microbial adsorption effect. Based on a cost-effectiveness analysis, mycelium pellets were found to be a low-cost adsorbent. The research outcomes facilitate a thorough comprehension of the adsorption process of pyrene by mycelial pellets and their relevant applications, proposing a cost-effective method without potential environmental issues (heat-killed mycelial pellets plus EPS) to removal PAHs.

Elucidating adsorption mechanisms of benzalkonium chlorides (BACs) on polypropylene and polyethylene terephthalate microplastics (MPs): Effects of BACs alkyl chain length and MPs characteristics

Since the onset of the COVID-19 pandemic, there has been an increase in the use of disposable plastics and disinfectants. This study systematically investigated the adsorption behavior and mechanisms of benzalkonium chlorides (BACs), commonly used disinfectants, on polypropylene (PP) and polyethylene terephthalate (PET) microplastics (MPs), considering various factors, such as characteristics of MPs, alkyl chain length of BACs, and environmental conditions. Our results demonstrated a higher adsorption capacity for PP-MPs with relatively hydrophobic properties compared to PET-MPs, where longer alkyl chains in BACs (i.e., higher octanol-water partition coefficients, Kow) significantly enhanced adsorption through hydrophobic interactions. The inverse relationship between particle size of MPs and adsorption was evident. While changes in pH minimally affected adsorption on PP-MPs, adsorption on PET-MPs increased with rising pH, highlighting the influence of pH on electrostatic interactions. Moreover, MP aging with UV/H2O2 amplified BAC adsorption on PP-MPs due to surface oxidation and fragmentation, whereas the properties of PET-MPs remained unaltered, resulting in unchanged adsorption capacities. Spectroscopy studies and density functional theory (DFT) calculations confirmed hydrophobic and electrostatic interactions as the primary adsorption mechanisms. These findings improve our understanding of MPs and BACs behavior in the environment, providing insights for environmental risk assessments related to combined pollution.

Microplastic inhibits the sorption of trichloroethylene on modified biochar

Biochar (BC) was used to remove trichloroethylene (TCE) from soil and water phases, and BC modification changed the sorption behavior of pollutants. Microplastics are emerging pollutants in the soil and water phases. Whether microplastics can affect the sorption of TCE by modified BC is not clear. Thus, batch sorption kinetics and isotherm experiments were conducted to elucidate the sorption of TCE on BC, and BC combined with polyethylene (PE) or polystyrene (PS). The results showed that HCl and NaOH modification increased TCE sorption on BC, while HNO3 modification inhibited TCE sorption on BC. When PE/PS and BC coexisted, the TCE sorption capacity decreased significantly on BC-CK + PE, BC-HCl + PE, BC-HNO3 + PE, BC-NaOH + PE, and BC-NaOH + PS, which was likely due to the preferential sorption of PE/PS on BC samples. We concluded that microplastics can change TCE sorption behavior and inhibit TCE sorption on BC samples. Thus, the interaction of BC and microplastics should be considered when BC is used for TCE removal in soil and water remediation.

Are you drowned in microplastic pollution? A brief insight on the current knowledge for early career researchers developing novel remediation strategies

Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 μm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.

Investigation of the adsorption behavior and adsorption mechanism of pollutants onto electron beam-aged microplastics

Microplastics, as an emerging pollutant, are widely distributed worldwide. Extensive research has been conducted to address the issue of microplastic pollution; however, effective methods for microplastic treatment are still lacking. This study innovatively utilizes electron beam technology to age and degrade microplastics. Compared to other treatment methods, electron beam technology can effectively promote the aging and degradation of microplastics. The Oxygen - carbon ratio of aged microplastics reached 0.071, with a mass loss of 48 % and a carbonyl index value of 0.69, making it the most effective method for short-term aging treatment in current research efforts. Theoretical calculations and experimental results demonstrate that a large number of oxygen-containing functional groups are generated on the surface of microplastics after electron beam irradiation, changing their adsorption performance for pollutants. Theoretical calculations show that an increase in oxygen-containing functional groups on the surface leads to a gradual decrease in hydrophobic pollutant adsorption capacity while increasing hydrophilic pollutant adsorption capacity for aged microplastics. Experimental studies were conducted to investigate the adsorption behavior and process of typical pollutants by aged microplastics which conform to pseudo-second-order kinetics and Henry model during the adsorption process, and the adsorption results are consistent with theoretical calculations. The results show that the degradation of microplastics is mainly due to hydroxyl radicals generated by electron beam irradiation, which can break the carbon chain of microplastics and gradually degrade them into small molecular esters and alcohols. Furthermore, studies have shown that microplastics can desorb pollutants in pure water and simulated gastric fluid. Overall, electron beam irradiation is currently the most effective method for degrading microplastics. These results also clearly elucidate the characteristics and mechanisms of the interaction between aged microplastics and organic pollutants, providing further insights for assessing microplastic pollution in real-world environments.

Effects of microplastics on the environmental behaviors of the herbicide atrazine in soil: Dissipation, adsorption, and bioconcentration

As an emerging contaminant in soil, the impact of microplastics (MPs) on the environmental behavior of other organic pollutants remains uncertain, potentially threatening the sustainability of agricultural production. In this study, the impact of two kinds of MPs on the environmental behaviors of herbicide atrazine in soil-plant system was investigated. The results showed that MPs significantly reduced the half-life 17.69 ∼ 21.86 days of atrazine in the soil, compared to the control group. Meanwhile, the introduction of MPs substantially increased atrazine adsorption. Additionally, MPs substantially enriched the diversity and functionality of soil microbiome, and the soil metabolic activity was stimulated. Regarding the crop growth, the accumulation of atrazine in maize were significantly decreased by approximately 48.4-78.5 % after exposure to MPs. In conclusion, this study reveals the impact of MPs on atrazine's environmental behaviors in soil and highlights their less effect on maize growth, providing valuable insights for managing MPs contamination in sustainable agriculture.

Flexible molecularly imprinted fiber library for the metabolic analysis of bisphenol F and ecological risk evaluation

Bisphenol F (BPF) has evoked global attentions due to its ubiquity and detrimental effects. Herein, a flexible molecularly imprinted fiber library was firstly proposed for the metabolic analysis of BPF in aquatic ecosystems. The library includes flexible single fibers and fiber arrays to precisely identify BPF and its metabolites with a wide range of polarities. Compared to commercial polyacrylate, the performance increased 11.56-570.98-fold. The adsorption capacity and the LogKow value were positively related. These arrays were used for the acquisition of environmental metabolomics data from aquatic ecosystems. In-depth data analysis showed that risk quotient was lower than 0.76, and bioaccumulation factor was lower than 2000 L/kg. Distribution concentration of BPF and its metabolites changed seasonally, and accumulation in sediment was much larger than that in surface water and hydrobionts. The risk is gradually increasing in sediment, but it does not reach high risk. The likelihood of bioaccumulation of parent compounds was greater than its metabolites. The library can be used in the metabolic diagnosis of pollutants with a broad range of polarities, providing a new method to acquire data for further ecological risk assessment, and offering a revolutionary strategy for environmental metabolomics investigation in aquatic ecosystems.

Adsorption interactions between typical microplastics and enrofloxacin: Relevant contributions to the mechanism

Microplastics (MPs) are increasingly contaminating the environment and they can combine with antibiotics as carriers to form complex contaminants. In this study, we systematically investigated the interactions between the antibiotic enrofloxacin (ENR) and MPs comprising polyethylene (PE), polyvinyl chloride (PVC), and polystyrene (PS). Characterization was performed by using conventional techniques and the mechanisms involved in interactions were initially explored based on adsorption kinetics, isotherms, and resolution experiments, and the adsorption capacities of the MPs were determined. In addition, the extended Derjaguin-Landau-Verwey-Overbeek theory was used to investigate the interaction mechanisms. The results showed that the interactions were weaker in strong acidic and alkaline environments, and the interactions were also inhibited at higher salt ion concentrations. The saturation adsorption amounts of ENR on PVC, PE, and PS were 74.63 μg/g, 103.09 μg/g, and 142.86 μg/g, respectively. The interactions between MPs and ENR were dominated by hydrophobic interactions, followed by van der Waals forces and acid-base forces. This study provides new insights into the adsorption behavior of ENR by MPs.

Insight into interactions between microplastics and fulvic acid: Mechanisms affected by microplastics type

Microplastics (MPs) can interact with dissolved organic matter (DOM), a common component found in the environment. However, the effect of MPs type on its interaction with DOM has not been systematically studied. Therefore, the binding properties of different MPs with fulvic acid (FA) were explored in this study. The results showed that polypropylene (PP) and polyethylene (PE) had higher adsorption affinity for FA than polystyrene (PS) and polyvinyl chloride (PVC). The interaction between MPs and FA conformed to the pseudo-first-order model and Freundlich model (except PS). The interaction mechanisms between various MPs tested in this paper and FA are considered to be different. PP, PE and PS interacted with the aromatic structure of FA and were entrapped in the FA polymers by the carboxyl groups and CO bonds, resulting in a highly conjugated co-polymer, suggesting that oxygen-containing functional groups played a key role. However, it was assumed that the interaction between PVC and FA was more likely to be caused by hydrophobic interaction. This research will help to enhance our comprehension of the environmental behavior of MPs and their interaction with the DOM specifically.

Microplastics and associated chemicals in drinking water: A review of their occurrence and human health implications

Microplastics (MPs) have entered drinking water (DW) via various pathways, raising concerns about their potential health impacts. This study provides a comprehensive review of MP-associated chemicals, such as oligomers, plasticizers, stabilizers, and ultraviolet (UV) filters that can be leached out during DW treatment and distribution. The leaching of these chemicals is influenced by various environmental and operating factors, with three major ones identified: MP concentration and polymer type, pH, and contact time. The leaching process is substantially enhanced during the disinfection step of DW treatment, due to ultraviolet light and/or disinfectant-triggered reactions. The study also reviewed human exposure to MPs and associated chemicals in DW, as well as their health impacts on the human nervous, digestive, reproductive, and hepatic systems, especially the neuroendocrine toxicity of endocrine-disrupting chemicals. An overview of MPs in DW, including tap water and bottled water, was also presented to enable a background understanding of MPs-associated chemicals. In short, certain chemicals leached from MPs in DW can have significant implications for human health and demand further research on their long-term health impacts, mitigation strategies, and interactions with other pollutants such as disinfection byproducts (DBPs) and per- and polyfluoroalkyl substances (PFASs). This study is anticipated to facilitate the research and management of MPs in DW and beverages.

Interfacial quantum chemical characterization of aromatic organic matter adsorption on oxidized microplastic surfaces

Examining the adsorption efficiency of individual contaminants on microplastics (MPs) is resource-intensive and time-consuming. To address this challenge, combined laboratory adsorption experiments with model simulations were performed to investigate the adsorption capacities and mechanisms of MPs before and after aging. Our adsorption experiments revealed that aged polyethylene (PE) and polyvinyl chloride (PVC) MPs exhibited increased adsorption capacity for benzene, phenol, and naphthalene. Additionally, density functional theory (DFT) simulations provided insights into changes in adsorption sites, adsorption energy, and charge density on MPs. The π bond of the benzene ring emerged as a pivotal factor in the adsorption process, with van der Waals forces exerting dominant influence. For instance, the adsorption energy of benzene on pristine PE was -0.01879 eV. When oxidized groups, such as hydroxyl, carbonyl, and carboxyl, on the surface of aged PE became the adsorption sites, the adsorption energy increased to -0.06976, -0.04781, and -0.04903 eV, respectively. Regions with unoxidized functional groups also exhibited higher adsorption energies than pristine PE. These results indicated that aged PE had a stronger affinity for benzene compared to pristine PE, enhancing its adsorption. Charge density difference and energy density of states corroborated this observation, revealing larger π-bond charge accumulation areas for benzene on aged PE, suggesting stronger dipole interactions and enhanced adsorption. Similar trends were observed for phenol and naphthalene. In summary, the DFT calculations aligned with the adsorption experiment findings, confirming the effectiveness of simulation methods in predicting changes in the adsorption performance of aged MPs.

Adsorption characteristics and mechanisms of water-soluble polymers (PVP and PEG) on kaolin and montmorillonite minerals

The excessive use and accumulation of water-soluble polymers (WSPs, known as "liquid plastics") in the environment can pose potential risks to both ecosystems and human health, but the environmental fate of WSPs remains unclear. Here, the adsorption behavior of WSPs with different molecular weight on kaolinite (Kaol) and montmorillonite (Mt) were examined. The results showed that the adsorption of PEG and PVP on minerals were controlled by hydrogen bond and van der Waals force. The Fourier transform infrared (FTIR) spectra and two-dimensional correlation spectroscopy (2D-COS) analysis revealed that there were interactions between the Al-O and Si-O groups of the minerals and the polar O- or N-containing functional groups as well as the alkyl groups of PEG and PVP. The adsorption characteristics of WSPs were closely related to their molecular weight and the pore size of minerals. Due to the relatively large mesopore size of Kaol, both PEG and PVP were absorbed into inner spaces, for which the adsorption capacity increased with molecular weight of the polymers. For Mt, all types of PEG could enter its micropores, while PVP with larger molecular weights appeared to be confined externally, leading to a decrease in the adsorption capacity of PVP with increasing molecular weight. The findings of this study provide a theoretical basis for scientific evaluation of environmental processes of WSPs.

Mechanistic insight into the role of typical microplastics in chlorination disinfection: Precursors and adsorbents of both MP-DOM and DBPs

Microplastics (MPs) in drinking water are predominantly < 10 µm. The leaching of MPs derived dissolved organic matters (MP-DOM) from 5 µm polypropylene MPs (PP-MPs) and polystyrene MPs (PS-MPs) and the formation of MP-DOM derived disinfection byproducts during chlorination disinfection were first investigated. Comparably, PS-MPs are more vulnerable to chlorination and the primary attacks are on para C in aromatic side-chains via electrophilic Cl-substitution and oxidation by two-electron transfer. The O/C and Cl/C ratio of polystyrene MPs was linear and exponential versus initial available Cl2 concentrations, respectively. The significant PS-DOM leaching was observed with initial available Cl2 of 4.0 mg/L (USEPA recommended upper dose). As the initial available Cl2 concentration increased to 8.0 mg/L, the adsorption of chloro-phenolic-components of 200 Daltons in PS-DOM by 5 µm PS-MPs was observed for the first time. Trichloromethane (TCM) was identified as the dominant disinfection byproduct with a formation potential of 60.3 ± 7.8 and 73.7 ± 9.8 μg/mg for PS-DOM and PP-DOM, respectively. The derived TCM could adsorb onto PS-MPs followed the pseudo-second-order kinetic and Langmuir isotherm models. Extreme chlorination could reduce the maximal adsorption capacity of TCM on 5 µm PS-MPs from 196.68 ± 48.66 to 146.02 ± 32.98 μg/g. Thus, PS-MPs act as precursors and carriers of TCM in chlorination.

Rapid and selective removal of aristolochic acid I in natural products by vinylene-linked iCOF resins

Rapid, efficient, and selective removal of toxicants such as aristolochic acid I (AAI) from complex natural product systems is of great significance for the safe use of herbal medicines or medicine-food plants. Addressing this challenge, we develop a high-performance separation approach based on ionic covalent organic frameworks (iCOFs) to separate and remove AAI. Two vinylene-linked iCOFs (NKCOF-46-Br- and NKCOF-55-Br-) with high crystallinity are fabricated in a green and scalable fashion via a melt polymerization synthesis method. The resulting materials exhibit a uniform morphology, high stability, fast equilibrium time, and superior affinity and selectivity for AAI. Compared to conventional separation media, NKCOF-46-Br- and NKCOF-55-Br- achieve the record high adsorption capacities of 246.0 mg g-1 and 178.4 mg g-1, respectively. Various investigations reveal that the positively charged framework and favorable pore microenvironment of iCOFs contribute to their high selectivity and adsorption efficiency. Moreover, the iCOFs exhibit excellent biocompatibility by in vivo toxicity assays. This study paves a new avenue for the rapid, selective and efficient removal of toxicants from complex natural systems.

Application of carbon-based adsorbents in the remediation of micro- and nanoplastics

Micro-nano plastics (MNPs) are emerging contaminants that can easily enter the food chain, posing risks to both the aquatic ecosystem and human health. Various physical, biological, and chemical methods have been explored to remove MNPs from water, and recently, adsorption technology has gained attention as an effective approach. Among the potential candidates, carbon-based adsorbent has emerged as a promising choice due to their low cost, eco-friendly nature, and sustainability. This paper summarizes recent advancements in MNP removal using carbon-based adsorbents, with a focus on the modification methods and adsorption mechanisms. Additionally, the factors influencing the adsorption performance and the methods for characterizing the adsorption mechanism are analyzed. Finally, the advantages and disadvantages of carbon-based adsorbents over other adsorbents are discussed, along with the current state of sustainable recycling and future research prospects.