Polymeric Graphitic Carbon Nitride for Heterogeneous Photocatalysis

Emerging trends in the development and applications of triazine-based covalent organic polymers: a comprehensive review

Owing to unique structural features, triazine-based covalent organic polymers (COPs) have attracted significant attention and emerged as novel catalysts or support materials for an array of applications. Typically formed by reacting triazine-based monomers or the in situ creation of triazine rings from nitrile monomers, these COPs possess 2D/3D meso/microporous structures held together via strong covalent linkages. The quest for efficient, stable and recyclable catalytic systems globally necessitates the need for a well-structured and comprehensive review summarizing the synthetic methodologies and applications of triazine-based COPs. This review explores the various synthetic routes and applications of these COPs in photocatalysis, heterogeneous catalysis, electrocatalysis, adsorption and sensing. By exploring the latest advancements and future directions, this review offers valuable insights into the synthesis and applications of triazine-based COPs.

Graphitic Carbon Nitride Structures on Carbon Cloth Containing Ultra- and Nano-Dispersed NiO for Photoactivated Oxygen Evolution

The development of low-cost and high-efficiency oxygen evolution reaction (OER) photoelectrocatalysts is a key requirement for H2 generation via solar-assisted water splitting. In this study, we report on an amenable fabrication route to carbon cloth-supported graphitic carbon nitride (gCN) nanoarchitectures, featuring a modular dispersion of NiO as co-catalyst. The synergistic interaction between gCN and NiO, along with the tailoring of their size and spatial distribution, yield very attractive OER performances and durability in freshwater splitting, of great significance for practical end-uses. The potential of gCN electrocatalysts containing ultra-dispersed, i. e. "quasi-atomic" NiO, exhibiting a higher activity than the ones containing nickel oxide nanoaggregates, is further highlighted by their activity even in real seawater. This work suggests that efficient OER catalysts can be designed through the construction of optimized interfaces between transition metal oxides and carbon nitride, yielding inexpensive and promising noble metal-free systems for real-world applications.

Various Morphologies of Graphitic Carbon Nitride (g-C3N4) and Their Effect on the Thermomechanical Properties of Thermoset Epoxy Resin Composites

This research aims to highlight the importance of diverse forms of graphitic carbon nitride (g-C3N4) as strengthening elements in epoxy composites. It explores the influence of three different forms of g-C3N4 and their concentrations on the mechanical properties of the epoxy composites. Various characterization techniques, such as scanning electron microscopy (SEM), dynamic light scattering (DLS), thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FTIR), were utilized to comprehend the effects of g-C3N4 morphology and particle size on the physical and chemical characteristics of epoxy resin. Mechanical properties, such as tensile strength, strain, modulus, and fracture toughness, were determined for the composite samples. SEM analysis was performed to examine crack morphology in samples with different reinforcements. Findings indicate that optimal mechanical properties were achieved with a 0.5 wt% bulk g-C3N4 filler, enhancing tensile strength by 14%. SEM micrographs of fracture surfaces revealed a transition from brittle to rough morphology, suggesting increased toughness in the composites. While the TGA results showed no significant impact on degradation temperature, dynamic mechanical analysis demonstrated a 17% increase in glass transition temperature. Furthermore, the improvement in thermal breakdown up to 600 °C was attributed to reinforced covalent bonds between carbon and nitrogen, supported by FTIR results.

P-N Bonds-Mediated Atomic-Level Charge-Transfer Channel Fabricated between Violet Phosphorus and Carbon Nitride Favors Charge Separation and Water Splitting

Heterostructures are widely employed in photocatalysis to promote charge separation and photocatalytic activity. However, their benefits are limited by the linkages and contact environment at the interface. Herein, violet phosphorus quantum dots (VPQDs) and graphitic carbon nitride (g-C3N4) are employed as model materials to form VPQDs/g-C3N4 heterostructures by a simple ultrasonic pulse excitation method. The heterostructure contains strong interfacial P-N bonds that mitigate interfacial charge-separation issues. P-P bond breakage occurs in the distinctive cage-like [P9] VPQD units during longitudinal disruption, thereby exposing numerous active P sites that bond with N atoms in g-C3N4 under ultrasonic pulse excitation. The atomic-level interfacial P-N bonds of the Z-scheme VPQDs/g-C3N4 heterostructure serve as photogenerated charge-transfer channels for improved electron-hole separation efficiency. This results in excellent photocatalytic performance with a hydrogen evolution rate of 7.70 mmol g-1 h-1 (over 9.2 and 8.5 times greater than those of pure g-C3N4 and VPQDs, respectively) and apparent quantum yield of 11.68% at 400 nm. Using atomic-level chemical bonds to promote interfacial charge separation in phosphorene heterostructures is a feasible and effective design strategy for photocatalytic water-splitting materials.

TiO2-based photocatalysts from type-II to S-scheme heterojunction and their applications

Photocatalysis is a promising sustainable technology to remove organic pollution and convert solar energy into chemical energy. Titanium dioxide has drawn extensive attention in this field owing to its high activity under UV light, good chemical stability, large availability, low price and low toxicity. However, the poor quantum efficiency derived from fast electron/hole recombination, the limited utilization of sunlight, and a weak reducing ability still hinder its practical application. Among the modification strategies of TiO2 to enhance its performance, the construction of heterojunctions with other semiconductors is a powerful and versatile way to maximise the separation of photogenerated charge carriers and steer their transport toward enhanced efficiency and selectivity. Here, the research progress and current status of TiO2 modification are reviewed, focusing on heterojunctions. A rapid evolution of the understanding of the different charge transfer mechanisms is witnessed from traditional type II to the recently conceptualised S-scheme. Particular attention is paid to different synthetic approaches and interface engineering methods designed to improve and control the interfacial charge transfer, and several cases of TiO2 heterostructures with metal oxides, metal sulfides and carbon nitride are discussed. The application hotspots of TiO2-based photocatalysts are summarized, including hydrogen generation by water splitting, solar fuel production by CO2 conversion, and the degradation of organic water pollutants. Hints about less studied and emerging processes are also provided. Finally, the main issues and challenges related to the sustainability and scalability of photocatalytic technologies in view of their commercialization are highlighted, outlining future directions of development.

Efficient photocatalytic activity and selective adsorption of UiO-67 (Zr)/g-C3N4 composite toward a mixture of parabens

In this study, UiO-67 (Zr)/g-C3N4 composites (U67N) were synthesized at wt.% ratios of 05:95, 15:85, and 30:70 using the solvothermal method at 80 °C for 24 h followed by calcination at 350 °C. The composites were characterized using UV-Vis diffuse reflectance spectroscopy, Fourier-transform infrared spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy-energy-dispersive X-ray spectroscopy, transmission electron microscopy, and nitrogen physisorption analysis. In addition, thermal stability analysis of UiO-67 was conducted using thermogravimetric analysis. The photocatalytic performance of the composites was assessed during the degradation and mineralization of a mixture of methylparaben (MeP) and propylparaben (PrP) under simulated sunlight. The adsorption process of U67N 15:85 was characterized through kinetic studies and adsorption capacity experiments, which were modeled using pseudo-first-order and pseudo-second-order kinetics and Langmuir and Freundlich isotherms, respectively. The influence of pH levels 3, 5, and 7 on the photocatalytic degradation of the mixture was investigated, revealing enhanced degradation and mineralization at pH 3. The U67N composite exhibited dual capability in removing contaminants through adsorption and photocatalytic processes. Among the prepared composites, U67N 15:85 demonstrated the highest photocatalytic activity, achieving removal efficiencies of 96.8% for MeP, 92.5% for PrP, and 45.7% for total organic carbon in 300 kJ/m2 accumulated energy (3 h of reaction time). The detoxification of the effluent was confirmed through acute toxicity evaluation using the Vibrio fischeri method. The oxidation mechanism of the heterojunction formed between UiO-67 (Zr) and g-C3N4 was proposed based on PL analysis, photoelectrochemistry studies (including photocurrent response, Nyquist, and Mott-Schottky analyses), and scavenger assays.

Screening potential dye sensitizers for water splitting photocatalysts using a genetic algorithm

Addressing the global fossil energy crisis necessitates the efficient utilization of sustainable energy sources. Hydrogen, a green fuel, can be generated using sunlight, water, and a photocatalyst. Employing sensitizers holds promise for enhancing photocatalyst performance, enabling high rates of hydrogen evolution through increased visible light absorption. However, sifting through millions of diverse molecules to identify suitable dyes for specific photocatalysts poses a significant challenge. In this study, we integrate genetic algorithm and geometry-frequency-noncovalent extended tight binding methods to efficiently screen 2.6 million potential sensitizers with a D-π-A-π-AA structure within a short timeframe. Subsequently, these optimized sensitizers are rigorously reassessed by using DFT/TDDFT methods, elucidating why they may serve as superior dyes compared to the reference dye WS5F, particularly in terms of light absorption, driving force, binding energy, etc. Additionally, our methodology uncovers molecular motifs of particular interest, including the furan π-bridge and the double cyano anchoring acceptor, which are prevalent in the most promising set of molecules. The developed genetic algorithm workflow and dye design principles can be extended to various compelling projects, such as dye-sensitized solar cells, organic photovoltaics, photo-induced redox reactions, pharmaceuticals, and beyond.

C3N5-based nanomaterials and their applications in heterogeneous catalysts, energy harvesting, and environmental remediation

Over the past few decades, the global reliance on fossil fuels and the exponential growth of human population have escalated global energy consumption and environmental issues. To tackle these dual challenges, metal catalysts, in particular precious metal ones, have emerged as pivotal players in the fields of environment and energy. Among the numerous metal-free and organic catalyst materials, C3N5-based materials have a major advantage over their carbon nitride (CxNy) counterparts owing to the abundant availability of raw materials, non-toxicity, non-hazardous nature, and exceptional performance. Although significant efforts have been dedicated to synthesising and optimising the applicable properties of C3N5-based materials in recent years, a comprehensive summary of the immediate parameters of this promising material is still lacking. Given the rapid development of C3N5-based materials, a timely review is essential for staying updated on their strengths and weaknesses across various applications, as well as providing guidance for designing efficient catalysts. In this study, we present an extensive overview of recent advancements in C3N5-based materials, encompassing their physicochemical properties, major synthetic methods, and applications in photocatalysis, electrocatalysis, and adsorption, among others. This systematic review effectively summarises both the advantages and shortcomings associated with C3N5-based materials for energy and environmental applications, thus offering researchers focussed on CxNy-materials an in-depth understanding of those based on C3N5. Finally, considering the limitations and deficiencies of C3N5-based materials, we have proposed enhancement schemes and strategies, while presenting personal perspectives on the challenges and future directions for C3N5. Our ultimate aim is to provide valuable insights for the research community in this field.

2-Pyran-4-Ylidene Malononitrile Based Conjugated Microporous Polymers as Metal-Free Heterogeneous Photocatalysts for Organic Synthesis

Photoactive conjugated microporous polymers (CMPs) as heterogeneous photocatalysts provide a sustainable alternative to classical metal-based semiconductor photosensitizers. However, previously reported CMPs are typically synthesized through metal catalyzed coupling reactions, which bears product separation, but also increases the price of materials. Herein, a new type of sp2 carbon linked DCM-CMPs are successfully designed and synthesized by organic base catalyzed Knoevenagel reaction using 2,6-Dimethyl-4H-pyran-4-ylidene-malononitrile and aromatic polyaldehydes as monomers. The new polymers feature inherent porosity, excellent stability, and fully π-conjugated skeleton with broad visible-light absorption. They effectively induce the synthesis of benzimidazole compounds under light irradiation, and exhibit wide substrate adaptability with outstanding recyclability.

Polydopamine Coating of Graphitic Carbon Nitride, g-C3N4, Improves Biomedical Application

Graphitic carbon nitride (g-C3N4) is an intriguing nanomaterial that exhibits photoconductive fluorescence properties under UV-visible light. Dopamine (DA) coating of g-C3N4 prepared from melamine was accomplished via self-polymerization of DA as polydopamine (PDA). The g-C3N4 was coated with PDA 1, 3, and 5 times repeatedly as (PDA@g-C3N4) in tris buffer at pH 8.5. As the number of PDA coatings was increased on g-C3N4, the peak intensity at 1512 cm-1 for N-H bending increased. In addition, the increased weight loss values of PDA@g-C3N4 structures at 600 °C from TGA thermograms confirmed that the coating was accomplished. The band gap of g-C3N4, 2.72 eV, was reduced to 0.87 eV after five coatings with PDA. A pristine g-C3N4 was found to have an isoelectric point (IEP) of 4.0, whereas the isoelectric points of 1PDA@g-C3N4 and 3PDA@g-C3N4 are close to each other at 3.94 and 3.91, respectively. On the other hand, the IEP of 5PDA@g-C3N4 was determined at pH 5.75 assuming complete coating with g-C3N4. The biocompatibility of g-C3N4 and PDA@g-C3N4 against L929 fibroblast cell lines revealed that all PDA@g-C3N4 coatings were found to be biocompatible up to a 1000 mg/mL concentration, establishing that PDA coatings did not adversely affect the biocompatibility of the composite materials. In addition, PDA@g-C3N4 was screened for antioxidant potential via total phenol content (TPC) and total flavonoid content assays and it was found that PDA@g-C3N4 has recognizable TPC values and increased linearly with an increased number of PDA coatings. Furthermore, blood compatibility of pristine g-C3N4 is enhanced considerably upon PDA coating, affirmed by hemolysis and the blood clotting index%. Additionally, α-glucosidase inhibitory properties of PDA@g-C3N4 structures revealed that 67.6 + 9.8% of this enzyme was evenly inhibited by 3PDA@g-C3N4 structure.

Heterogeneous Organocatalysts for Light-Driven Reactions in Continuous Flow

Within the realm of organic synthesis, photocatalysis has blossomed since the beginning of the last decade. A plethora of classical reactivities, such as selective oxidation of alcohol and amines, redox radical formation of reactive species in situ, and indirect activation of an organic substrate for cycloaddition by EnT, have been revised in a milder and more sustainable fashion via photocatalysis. However, even though the spark of creativity leads scientists to explore new reactions and reactivities, the urgency of replacing the toxic and critical metals that are involved as catalysts has encouraged chemists to find alternatives in the branch of science called organocatalysis. Unfortunately, replacing metal catalysts with organic analogues can be too expensive sometimes; however, this drawback can be solved by the reutilization of the catalyst if it is heterogeneous. The aim of this review is to present the recent works in the field of heterogeneous photocatalysis, applied to organic synthesis, enabled by continuous flow. In detail, among the heterogeneous catalysts, g-CN, polymeric photoactive materials, and supported molecular catalysts have been discussed within their specific sections, rather than focusing on the types of reactions.

Carboxymethylation of Cinnamyl Alcohol with Dimethyl Carbonate over Graphitic Carbon Nitrides

A set of graphitic carbon nitride samples was prepared using a straightforward experimental procedure without templates and any subsequent treatments. The materials were studied in-depth using a range of physical and chemical methods such as X-ray diffraction, FTIR spectroscopy, elemental analysis (CHN), nitrogen physisorption, SEM, XPS, TPD CO2. The resulting g-C3N4 was shown to be highly efficient in carboxymethylation of cinnamyl alcohol with dimethyl carbonate yielding up to ca. 82 % of the desired cinnamyl methyl carbonate. In the studied conditions, an increase in the surface N atomic content leads to an increase in selectivity towards the desired carbonate, while a higher surface O content was beneficial for side products. Metal-free graphitic carbon nitride was shown to be one of the most productive (ca. 2 mol/h kgcat) in the investigated reaction among studied heterogeneous catalysts.

Light-Mediated Polymerization Catalyzed by Carbon Nanomaterials

Carbon nanomaterials, specifically carbon dots and carbon nitrides, play a crucial role as heterogeneous photoinitiators in both radical and cationic polymerization processes. These recently introduced materials offer promising solutions to the limitations of current homogeneous systems, presenting a novel approach to photopolymerization. This review highlights the preparation and photocatalytic performance of these nanomaterials, emphasizing their application in various polymerization techniques, including photoinduced i) free radical, ii) RAFT, iii) ATRP, and iv) cationic photopolymerization. Additionally, it discusses their potential in addressing contemporary challenges and explores prospects in this field. Moreover, carbon nitrides, in particular, exhibit exceptional oxygen tolerance, underscoring their significance in radical polymerization processes and allowing their applications such as 3D printing, surface modification of coatings, and hydrogel engineering.

Intrinsic Self-Trapped Excitons in Graphitic Carbon Nitride

Graphitic carbon nitrides (g-C3N4) as low-cost, chemically stable, and ecofriendly layered semiconductors have attracted rapidly growing interest in optoelectronics and photocatalysis. However, the nature of photoexcited carriers in g-C3N4 is still controversial, and an independent charge-carrier picture based on the band theory is commonly adopted. Here, by performing transient spectroscopy studies, we show characteristics of self-trapped excitons (STEs) in g-C3N4 nanosheets including broad trapped exciton-induced absorption, picosecond exciton trapping without saturation at high photoexcitation density, and transient STE-induced stimulated emissions. These features, together with the ultrafast exciton trapping polarization memory, strongly suggest that STEs intrinsically define the nature of the photoexcited states in g-C3N4. These observations provide new insights into the fundamental photophysics of carbon nitrides, which may enlighten novel designs to boost energy conversion efficiency.

Metallosalen modified carbon nitride a versatile and reusable catalyst for environmentally friendly aldehyde oxidation

The development of environmentally friendly catalysts for organic transformations is of great importance in the field of green chemistry. Aldehyde oxidation reactions play a crucial role in various industrial processes, including the synthesis of pharmaceuticals, agrochemicals, and fine chemicals. This paper presents the synthesis and evaluation of a new metallosalen carbon nitride catalyst named Co(salen)@g-C3N4. The catalyst was prepared by doping salicylaldehyde onto carbon nitride, and subsequently, incorporating cobalt through Schiff base chemistry. The Co(salen)@g-C3N4 catalyst was characterized using various spectroscopic techniques including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Infrared Spectroscopy (IR), and Thermogravimetric Analysis (TGA). Furthermore, after modification with salicylaldehyde, the carbon nitride component of the catalyst exhibited remarkable yields (74-98%) in oxidizing various aldehyde derivatives (20 examples) to benzoic acid. This oxidation reaction was carried out under mild conditions and resulted in short reaction times (120-300 min). Importantly, the catalyst demonstrated recyclability, as it could be reused for five consecutive runs without any loss of activity. The reusable nature of the catalyst, coupled with its excellent yields in oxidation reactions, makes it a promising and sustainable option for future applications.

The Heptazine-Based Materials through Intrinsically Modification for the Cycloaddition of CO2 and Bisepoxides

For the efficient utilization of CO2 into valuable product, the attractive carbon nitride catalysts have been widely studied. In this work, heptazine-related materials with varying degree of polymerization were designed by an intrinsically modification strategy and employed in the cycloaddition of CO2 with the bisepoxide 1, 4-butanediol diglycidyl ether (BDODGE). We initially figured out that the sample prepared at 450 °C contained more melem hydrate, exhibiting the best performance. The epoxides conversion and corresponding cyclic carbonates selectivity could achieve 93.1 % and 99.3 % at 140 °C for 20 h without any cocatalyst and solvent, respectively. Results of the catalytic tests suggested that the high catalytic activity was dependent on big size porous structure and the synergetic effect of active amino groups and -OH groups. The role of water in maintaining the specific structure and providing active site has been proved. Moreover, the CN-450-W catalyst exhibited outstanding recycling stability. And finally, a plausible reaction mechanism was proposed.

Recent advances in ternary Z-scheme photocatalysis on graphitic carbon nitride based photocatalysts

Due to its excellent photocatalytic performance over the last few years, graphitic-like carbon nitride (g-C3N4) has garnered considerable notice as a photocatalyst. Nevertheless, several limitations, including small surface area, the rates at which photo-generated electrons and holes recombine are swift, and the inefficient separation and transport of photoexcited carriers continue to impede its solar energy utilization. To overcome those limitations in single-component g-C3N4, constructing a heterogeneous photocatalytic system has emerged as an effective way. Among the various studies involving the incorporation of hetero composite materials to design heterojunctions, among the most promising approaches is to assemble a Z-scheme photocatalytic configuration. The Z-scheme configuration is essential because it facilitates efficient photocarrier separation and exhibits superior redox ability in separated electrons and holes. Moreover, ternary composites have demonstrated enhanced photocatalytic activities and reinforced photostability. Ternary Z-scheme heterostructures constructed with g-C3N4 possess all the above-mentioned merits and provide a pioneering strategy for implementing photocatalytic systems for environmental and energy sustainability. A summary of the latest technological advancements toward design and fabrication in ternary all-solid-state Z-scheme (ASSZ) and direct Z-scheme (DZ) photocatalysts built on g-C3N4 is presented in this review. Furthermore, the review also discusses the application of ternary Z-scheme photocatalytic architecture established on g-C3N4.

Vibrational dynamics and spectroscopy of water at porous g-C3N4 and C2N surfaces

Porous graphitic materials containing nitrogen are promising catalysts for photo(electro)chemical reactions, notably water splitting, but can also serve as "molecular sieves". Nitrogen increases the hydrophilicity of the graphite parent material, among other effects. A deeper understanding of how water interacts with C- and N-containing layered materials, if and which differences exist between materials with different N content and pore size, and what the role of water dynamics is - a prerequsite for catalysis and sieving - is largely absent, however. Vibrational spectroscopy can answer some of these questions. In this work, the vibrational dynamics and spectroscopy of deuterated water molecules (D2O) mimicking dense water layers at room temperature on the surfaces of two different C/N-based materials with different N content and pore size, namely graphitic C3N4 (g-C3N4) and C2N, are studied using ab initio molecular dynamics (AIMD). In particular, time-dependent vibrational sum frequency generation (TD-vSFG) spectra of the OD modes and also time-averaged vSFG spectra and OD frequency distributions are computed. This allows us to distinguish "free" (dangling) OD bonds from OD bonds that are bound in a H-bonded water network or at the surface - with subtle differences between the two surfaces and also to a pure water/air interface. It is found that the temporal decay of OD modes is very similar on both surfaces with a correlation time near 4 ps. In contrast, TD-vSFG spectra reveal that the interconversion time from "bonded" to "free" OD bonds is about 8 ps for water on C2N and thus twice as long as for g-C3N4, demonstrating a propensity of the former material to stabilize bonded OD bonds.

MoxC Heterostructures as Efficient Cocatalysts in Robust MoxC/g-C3N4 Nanocomposites for Photocatalytic H2 Production from Ethanol

In this work, we studied new materials free of noble metals that are active in photocatalytic H2 generation from ethanol aqueous solutions (EtOHaq), which can be obtained from biomass. MoxC/g-C3N4 photocatalysts containing hexagonal (hcp) Mo2C and/or cubic (fcc) MoC nanoparticles on g-C3N4 nanosheets were prepared, characterized, and evaluated for photocatalytic hydrogen production from EtOHaq (25% v/v). Tailored MoxC/g-C3N4 nanocomposites with MoxC crystallite sizes in the 4-37 nm range were prepared by treatment with ultrasound of dispersions containing MoxC and g-C3N4 nanosheets, formerly synthesized. The characterization of the resulting nanocomposites, MoxC/g-C3N4, by different techniques, including photoelectrochemical measurements, allowed us to relate the photocatalytic performance of materials with the characteristics of the MoxC phase integrated onto g-C3N4. The samples containing smaller hcp Mo2C crystallites showed better photocatalytic performance. The most performant nanocomposite contained nanoparticles of both hcp Mo2C and fcc MoC and produced 27.9 mmol H2 g-1 Mo; this sample showed the lowest recombination of photogenerated charges, the highest photocurrent response, and the lowest electron transfer resistance, which can be related to the presence of MoC-Mo2C heterojunctions. Moreover, this material allows for easy reusability. This work provides new insights for future research on noble-metal-free g-C3N4-based photocatalysts.

Transition metals-doped g-C3N4 nanostructures as advanced photocatalysts for energy and environmental applications

Graphitic carbon nitride (g-C3N4)-based heterostructured photocatalysts have received significant attention for its potential applications in the treatment of wastewater and hydrogen evolution. The utilization of semiconductor materials in heterogeneous photocatalysis has recently received great attention due to their potential and eco-friendly properties. Doping with metal ions plays a crucial role in altering the photochemical characteristics of g-C3N4, effectively enhancing photoabsorption into the visible range and thus improving the photocatalytic performance of doped photocatalysts. As an emerging nanomaterial, nanostructured g-C3N4 represents a visible light-active semiconducting photocatalyst that has attracted significant interest in the photocatalysis field, particularly for its practical water treatment applications. To the best of our knowledge, investigations of functionalized photocatalytic (PC) materials on 3d transition metal-doped g-C3N4 remain unexplored in the existing literature. g-C3N4 based heterohybrid photocatalysts have demonstrated excellent reusability, making them highly promising for wastewater treatment applications. This paper describes the overview of numerous studies conducted on the heterostructured g-C3N4 photocatalysts with various 3d metals. Research studies have revealed that the introduction of element doping with various 3d transition metals (e.g., Ti, Mn, Fe, Co, Ni, Cu, Zn, etc.) into g-C3N4 is an efficient approach to enhance degradation efficacy and boost photocatalytic activity (PCA) of doped g-C3N4 catalysts. Moreover, the significance of g-C3N4 heterostructured nanohybrids is highlighted, particularly in the context of wastewater treatment applications. The study concludes by providing insights into future perspectives in this developing area of research, with a specific focus on the degradation of various organic contaminants.

Exploring Highly Efficient Broadband Self-Trapped-Exciton Luminophors: from 0D to 3D Materials

The review summarizes our recent reports on brightly-emitting materials with varied dimensionality (3D, 2D, 0D) synthesized using "green" chemistry and exhibiting highly efficient photoluminescence (PL) originating from self-trapped exciton (STE) states. The discussion starts with 0D emitters, in particular, ternary indium-based colloidal quantum dots, continues with 2D materials, focusing on single-layer polyheptazine carbon nitride, and further evolves to 3D luminophores, the latter exemplified by lead-free double halide perovskites. The review shows the broadband STE PL to be an inherent feature of many materials produced in mild conditions by "green" chemistry, outlining PL features general for these STE emitters and differences in their photophysical properties. The review is concluded with an outlook on the challenges in the field of STE PL emission and the most promising venues for future research.

Enhancing the Photoluminescence and Electroluminescence of Graphitic Carbon Nitride via Atomic and Molecular Co-modification

Graphitic carbon nitride (g-CN) materials exhibit attractive optoelectronic physical properties; however, their low photoluminescence quantum yields (PLQYs) limit their applications in luminescent devices. Here, boron-doped aromatic carbon nitride (B-PhCNx) was synthesized for the first time via direct thermal polymerization of 2,4-diamino-6-phenyl-1,3,5-triazine and boric acid. The impact of B doping and phenyl modifying on the structural and optical characteristics of the samples was investigated in detail. The highest PLQY of 40.7% was achieved in B-PhCN20, which is 6.8 times that of pristine carbon nitride (p-CN). The B-PhCN20-based light-emitting diode demonstrates a maximum luminance of 1494 cd m-2 and a maximum external quantum efficiency of 1.03%, which are 3.5 and 4.9 times that of the p-CN-based device, respectively. Our findings will provide a reference for rationally designing low-cost and high-performance carbon-nitride-based optoelectronic devices.

Precursor dependent - Visible light-driven g-C3N4 coated polyurethane foam for photocatalytic applications

Photocatalysis has emerged as a highly effective method for eliminating organic pollutants from wastewater. The immobilization of photocatalysts on a suitable solid surface is highly desired to achieve enhanced photocatalytic activity. In this work, graphitic carbon nitride (g-C3N4) is synthesized with three different precursors (melamine, thiourea, and urea) via a simple thermal exfoliation method and successfully immobilized on a polyurethane (PU) foam using the facile dip coating method. The photocatalytic activity of g-C3N4 bulk and g-C3N4 nanosheets-coated PU foams are compared using methyl orange dye and tetracycline hydrochloride as a test pollutant under visible light irradiation. Our results show that the type of precursors and surface area of the sample have a significant role in photocatalytic dye degradation. The urea-based g-C3N4 - PU foam shows better photocatalytic activity than the melamine or thiourea based g-C3N4 - PU foam. The scavenger test unveils that superoxide radical (O2●-) and holes (h+) are the main reactive oxidative species responsible for MO dye and TcH degradations. The cycling experiments are also carried out to confirm the reusability of the g-C3N4 floating catalyst for practical applications. Furthermore, a possible reaction mechanism has also been proposed.

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Designing of covalent organic framework/2D g-C3N4 heterostructure using a simple method for enhanced photocatalytic hydrogen production

Designing heterostructure photocatalysts is a promising approach for developing highly efficient photocatalysts for hydrogen energy production. In this work, we synthesized a series of a covalent organic framework (COF)/g-C3N4 (CN) heterojunction photocatalysts, denoted as x % COF/CN (in which x indicates the weight % of COF and x  = 5, 10, 20, 30, 40, 50, 90, 95, 100), for hydrogen production. The COF, which is a key component of the photocatalyst, was prepared by assembling benzothiadiazole (BT) and pyrene (Py) derivatives as building blocks. Integrating COF rods into the two-dimensional (2D) layered g-C3N4 structure significantly improved photocatalytic H2 production. The hybrid system (30 % COF/CN) displayed an outstanding hydrogen evolution rate (HER) of 27540 ± 805 μmol g-1h-1, outperforming most known COFs and g-C3N4-based photocatalysts, besides exhibiting stable photocatalytic performance. Moreover, the apparent quantum yield (AQY) was 15.5 ± 0.8 % at 420 nm. Experimental techniques and density functional theory (DFT) calculations demonstrated that the 30 % COF/CN heterostructure has broad visible-light absorption, adequate band energy levels, and the best chemical reactivity descriptors compared to the individual components, resulting in effective carrier separation and excellent performance. Our findings offer a valuable strategy for developing highly efficient and stable heterojunction photocatalysts for visible-light-driven H2 evolution.

Carbon dioxide reduction to high-value chemicals in microbial electrosynthesis system: Biological conversion and regulation strategies

Large emissions of atmospheric carbon dioxide (CO2) are causing climatic and environmental problems. It is crucial to capture and utilize the excess CO2 through diverse methods, among which the microbial electrosynthesis (MES) system has become an attractive and promising technology to mitigate greenhouse effects while reducing CO2 to high-value chemicals. However, the biological conversion and metabolic pathways through microbial catalysis have not been clearly elucidated. This review first introduces the main acetogenic bacteria for CO2 reduction and extracellular electron transfer mechanisms in MES. It then intensively analyzes the CO2 bioconversion pathways and carbon chain elongation processes in MES, together with energy supply and utilization. The factors affecting MES performance, including physical, chemical, and biological aspects, are summarized, and the strategies to promote and regulate bioconversion in MES are explored. Finally, challenges and perspectives concerning microbial electrochemical carbon sequestration are proposed, and suggestions for future research are also provided. This review provides theoretical foundation and technical support for further development and industrial application of MES for CO2 reduction.

Graphitic Carbon Nitride/Zinc Oxide-Based Z-Scheme and S-Scheme Heterojunction Photocatalysts for the Photodegradation of Organic Pollutants

Graphitic carbon nitride (g-C3N4), a metal-free polymer semiconductor, has been recognized as an attractive photocatalytic material for environmental remediation because of its low band gap, high thermal and photostability, chemical inertness, non-toxicity, low cost, biocompatibility, and optical and electrical efficiency. However, g-C3N4 has been reported to suffer from many difficulties in photocatalytic applications, such as a low specific surface area, inadequate visible-light utilization, and a high charge recombination rate. To overcome these difficulties, the formation of g-C3N4 heterojunctions by coupling with metal oxides has triggered tremendous interest in recent years. In this regard, zinc oxide (ZnO) is being largely explored as a self-driven semiconductor photocatalyst to form heterojunctions with g-C3N4, as ZnO possesses unique and fascinating properties, including high quantum efficiency, high electron mobility, cost-effectiveness, environmental friendliness, and a simple synthetic procedure. The synergistic effect of its properties, such as adsorption and photogenerated charge separation, was found to enhance the photocatalytic activity of heterojunctions. Hence, this review aims to compile the strategies for fabricating g-C3N4/ZnO-based Z-scheme and S-scheme heterojunction photocatalytic systems with enhanced performance and overall stability for the photodegradation of organic pollutants. Furthermore, with reference to the reported system, the photocatalytic mechanism of g-C3N4/ZnO-based heterojunction photocatalysts and their charge-transfer pathways on the interface surface are highlighted.

Eco-friendly phytofabrication of Ficus Benjamina L. based ZnO-doped g-C3N4 nanocomposites for remarkable photocatalysis and antibacterial applications

The research reported here emphasizes the phytoextract route synthesized ZnO-doped g-C3N4 (GCN) for its photocatalytic activity, which helps to ensure a sustained & healthy environment. The leaf extract solution of Ficus Benjamina L. was used for the synthesis of ZnO nanoparticles, and GCN was prepared via urea using a thermal polymerization process. The flower extract functions as both stabilizers and capping agents during the process of synthesis of ZnO nanoparticles. The synthesized nanocomposites were then calcined at 400 °C and were further characterized with spectroscopy (UV-Vis), diffracted pattern (XRD), and infrared spectroscopy (FTIR). Further, the photocatalytic activity of auramine orange (AO) and methylene blue (MB) dye from phytoextract route synthesized pure ZnO NPs, GCN-Pure, and composites with varied millimolar concentrations of ZnO nanoparticles with GCN of the constant amount was checked. After the complete analysis, it was observed that the series that was prepared of ZnO-GCN nanocomposites showed notable enhancement in the degradation pattern of the methylene blue dye. Apparently, 1.5 mmol (mM) ZnO-GCN presented greater degradation patterns for Auramine orange and Methylene blue dye as compared to other nanocomposites that were synthesized. The observed increased photocatalytic activity has a conceivable explanation. The antibacterial activity studies of the prepared nanocomposites were also performed against the E. coli strain showing an enhanced zone of inhibition towards it.

Synthesis and up-to-date applications of 2D microporous g-C3N4 nanomaterials for sustainable development

In recent years, with the development of industrial technology and the increase of people's environmental awareness, the research on sustainable materials and their applications has become a hot topic. Among two-dimensional (2D) materials that have been selected for sustainable research, graphitic phase carbon nitride (g-C3N4) has become a hot research topic because of its many outstanding advantages such as simple preparation, good electrochemical properties, excellent photochemical properties, and better thermal stability. Nevertheless, the inherent limitations of g-C3N4 due to its relatively poor specific surface area, rapid charge recombination, limited light absorption range, and inferior dispersion in aqueous and organic media have limited its practical application. In the review, we summarize and analyze the unique structure of the 2D microporous nanomaterial g-C3N4, its synthesis method, chemical modification method, and the latest application examples in various fields in recent years, highlighting its advantages and shortcomings, with a view to providing ideas for overcoming the difficulties in its application. Furthermore, the pressing challenges faced by g-C3N4 are briefly discussed, as well as an outlook on the application prospects of g-C3N4 materials. It is expected that the review in this paper will provide more theoretical strategies for the future practical application of g-C3N4-based materials, as well as contributing to nanomaterials in sustainable applications.

On-Surface Carbon Nitride Growth from Polymerization of 2,5,8-Triazido-s-heptazine

Carbon nitrides have recently come into focus for photo- and thermal catalysis, both as support materials for metal nanoparticles as well as photocatalysts themselves. While many approaches for the synthesis of three-dimensional carbon nitride materials are available, only top-down approaches by exfoliation of powders lead to thin-film flakes of this inherently two-dimensional material. Here, we describe an in situ on-surface synthesis of monolayer 2D carbon nitride films as a first step toward precise combination with other 2D materials. Starting with a single monomer precursor, we show that 2,5,8-triazido-s-heptazine can be evaporated intact, deposited on a single crystalline Au(111) or graphite support, and activated via azide decomposition and subsequent coupling to form a covalent polyheptazine network. We demonstrate that the activation can occur in three pathways, via electrons (X-ray illumination), via photons (UV illumination), and thermally. Our work paves the way to coat materials with extended carbon nitride networks that are, as we show, stable under ambient conditions.

Biogenic Silver Nanoparticles/Mg-Al Layered Double Hydroxides with Peroxidase-like Activity for Mercury Detection and Antibacterial Activity

Over the past decade, the attention of researchers has been drawn to materials with enzyme-like properties to substitute natural enzymes. The ability of nanomaterials to mimic enzymes makes them excellent enzyme mimics; nevertheless, there is a wide berth for improving their activity and providing a platform to heighten their potential. Herein, we report a green and facile route for Tectona grandis leaves extract-assisted synthesis of silver nanoparticles (Ag NPs) decorated on Mg-Al layered double hydroxides (Mg-Al-OH@TGLE-AgNPs) as a nanocatalyst. The Mg-Al-OH@TGLE-AgNPs nanocatalyst was well characterized, and the average crystallite size of the Ag NPs was found to be 7.92 nm. The peroxidase-like activity in the oxidation of o-phenylenediamine in the presence of H2O2 was found to be an intrinsic property of the Mg-Al-OH@TGLE-AgNPs nanocatalyst. In addition, the use of the Mg-Al-OH@TGLE-AgNPs nanocatalyst was extended towards the quantification of Hg2+ ions which showed a wide linearity in the concentration range of 80-400 μM with a limit of detection of 0.2 nM. Additionally, the synergistic medicinal property of Ag NPs and the phytochemicals present in the Tectona grandis leaves extract demonstrated notable antibacterial activity for the Mg-Al-OH@TGLE-AgNPs nanocatalyst against Gram-negative Escherichia coli and Gram-positive Bacillus cereus.

Local Hydrogen Bonding Determines Branching Pathways in Intermolecular Heptazine Photochemistry

Heptazine is the molecular core of the widely studied photocatalyst carbon nitride. By analyzing the excited-state intermolecular proton-coupled electron-transfer (PCET) reaction between a heptazine derivative and a hydrogen-atom donor substrate, we are able to spectroscopically identify the resultant heptazinyl reactive radical species on a picosecond time scale. We provide detailed spectroscopic characterization of the tri-anisole heptazine:4-methoxyphenol hydrogen-bonded intermolecular complex (TAHz:MeOPhOH), using femtosecond transient absorption spectroscopy and global analysis, to reveal distinct product absorption signatures at ∼520, 1250, and 1600 nm. We assign these product peaks to the hydrogenated TAHz radical (TAHzH^•) based on control experiments utilizing 1,4-dimethoxybenzene (DMB), which initiates electron transfer without concomitant proton transfer, i.e., no excited-state PCET. Additional control experiments with radical quenchers, protonation agents, and UV-vis-NIR spectroelectrochemistry also corroborate our product peak assignments. These spectral assignments allowed us to monitor the influence of the local hydrogen-bonding environment on the resulting evolution of photochemical products from excited-state PCET of heptazines. We observe that the preassociation of heptazine with the substrate in solution is extremely sensitive to the hydrogen-bond-accepting character of the solvent. This sensitivity directly influences which product signatures we detect with time-resolved spectroscopy. The spectral signature of the TAHzH^• radical assigned in this work will facilitate future in-depth analysis of heptazine and carbon nitride photochemistry. Our results may also be utilized for designing improved PCET-based photochemical systems that will require precise control over local molecular environments. Examples include applications such as preparative synthesis involving organic photoredox catalysis, on-site solar water purification, as well as photocatalytic water splitting and artificial photosynthesis.

Preparation of site-specific Z-scheme g-C3N4/PAN/PANI@LaFeO3 cable nanofiber membranes by coaxial electrospinning: Enhancing filtration and photocatalysis performance

The coaxial electrospinning method for preparation of g-C₃N₄/polyacrylonitrile (PAN)/polyaniline (PANI)@LaFeO₃ cable fiber membrane (PC@PL) was designed for adsorption-filtration-photodegradation of pollutants. A series of characterization results show that LaFeO₃ and g-C₃N₄ nanoparticles (NPs) are respectively loaded in the inner and outer layers of PAN/PANI composite fibers to construct the site-specific Z-type heterojunction system with spatially separated morphologies. The PANI in cable not only possesses abundant exposed amino/imino functional groups for adsorption of contaminant molecules but also due to the excellent electrical conductivity works as a redox medium for collecting and consuming the electrons and holes from LaFeO₃ and g-C₃N₄, which can efficiently promote photo-generated charge carriers separation and improve the catalytic performance. Further investigations demonstrate that as a photo-Fenton catalyst LaFeO₃ in PC@PL catalyzes/activates the H₂O₂ generated in situ by LaFeO₃/g-C₃N₄, further enhancing the decontamination efficiency of the PC@PL. The porous, hydrophilic, antifouling, flexible and reusable properties of the PC@PL membrane significantly enhance the mass transfer efficiency of reactants by filtration effect and increase the amount of dissolved oxygen, thus producing massive •OH for degradation of pollutants, which maintains the water flux (1184 L m^-2. h^-1 (LMH)) and the rejection rate (98.5%). Profiting from its unique synergistic effect of adsorption, photo-Fenton and filtration, PC@PL exhibits wonderful self-cleaning performance and distinguished removal rate for methylene blue (97.0%), methyl violet (94.3%), ciprofloxacin (87.6%) and acetamiprid (88.9%) within 75 min, disinfection (100% Escherichia coli (E. coli) and 80% Staphylococcus aureus (S.aureus) inactivation)) and excellent cycle stability.

g-C3N4-modified Zr-Fc MOFs as a novel photocatalysis-self-Fenton system toward the direct hydroxylation of benzene to phenol

In order to explore a green, economic, and sustainable phenol production process, a heterojunction semiconductor materials g-C₃N₄/Zr-Fc MOF was synthesized via an in situ synthesis method. With the synergistic effect of photocatalysis and the Fenton effect, the composite could effectively catalyze the direct hydroxylation of benzene to phenol under visible light irradiation. The yield of phenol and the selectivity were 13.84% and 99.38% under the optimal conditions, respectively, and it could still maintain high photocatalytic activity after 5 photocatalytic cycles. Therefore, the designed photocatalysis-self-Fenton system has great potential in the field of the direct hydroxylation of benzene to phenol.

Synthesis and Characterization of a Tertiary Composite of Cu, Mn, and g-C3N4: An Efficient Visible Light-Active Catalyst for Wastewater Treatment

In this study, a tertiary composite of graphitic carbon nitride (GCN) with copper and manganese is utilized for photocatalytic degradation to add to efforts for tackling environmental pollution problems. The photocatalytic efficiency of GCN is enhanced with the doping of copper and manganese. This composite is prepared using melamine thermal self-condensation. The formation and characteristics of the composite Cu-Mn-doped GCN are affirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet (UV), and Fourier transform infrared spectroscopy (FTIR). This composite has been used for the degradation of an organic dye (methylene blue (MB)) from water at neutral conditions (pH = 7) of the solution. The percentage photocatalytic degradation of MB by Cu-Mn-doped GCN is higher than that of Cu-GCN and GCN. The prepared composite enhances the degradation of methylene blue (MB) from 5 to 98% under sunlight. The photocatalytic degradation is enhanced owing to the reduction of hole-electron recombination in GCN, enhanced surface area, and extended sunlight utilization by the doped Cu and Mn.

Detection of nitrification inhibitor dicyandiamide: A direct electrochemical approach

A single run approach for rapid detection of nitrification inhibitor, dicyandiamide (DCD) using electrogenerated chlorine assisted polymerization through azo bond, under acidic conditions and at a preanodized screen printed carbon electrode (SPCE*) is presented. The role of chloride containing support electrolyte in acidic medium along with oxygen functionalities/edge sites are found to be crucial for the successful oxidative polymerization and subsequent adsorption of oxidized products on the electrode surface. The SEM, cyclic voltammetry and X-ray photoelectron spectroscopy studies were used to characterize the polymer film formation. The system exhibited a linear range between 20 and 170 μM with a detection limit of 3 μM (S/N = 3). The method was successfully tested for the detection of DCD in dairy and water samples. Simultaneous detection of DCD in the presence of melamine has also been demonstrated.

Organic Covalent Interaction-based Frameworks as Emerging Catalysts for Environment and Energy Applications: Current Scenario and Opportunities

The term "covalent organic framework" (COF) refers to a class of porous organic polymeric materials made from organic building blocks that have been covalently bonded. The preplanned and predetermined bonding of the monomer linkers allow them to demonstrate directional flexibility in two- or three-dimensional spaces. COFs are modern materials, and the discovery of new synthesis and linking techniques has made it possible to prepare them with a variety of favorable features and use them in a range of applications. Additionally, they can be post-synthetically altered or transformed into other materials of particular interest to produce compounds with enhanced chemical and physical properties. Because of its tunability in different chemical and physical states, post-synthetic modifications, high stability, functionality, high porosity and ordered geometry, COFs are regarded as one of the most promising materials for catalysis and environmental applications. This study highlights the basic advancements in establishing the stable COFs structures and various post-synthetic modification approaches. Further, the photocatalytic applications, such as organic transformations, degradation of emerging pollutants and removal of heavy metals, production of hydrogen and Conversion of carbon dioxide (CO₂ ) to useful products have also been presented. Finally, the future research directions and probable outcomes have also been summarized, by focusing their promises for specialists in a variety of research fields.

Highly selective CO2 photoreduction to CO on MOF-derived TiO2

Metal-Organic Framework (MOF)-derived TiO2, synthesised through the calcination of MIL-125-NH2, is investigated for its potential as a CO2 photoreduction catalyst. The effect of the reaction parameters: irradiance, temperature and partial pressure of water was investigated. Using a two-level design of experiments, we were able to evaluate the influence of each parameter and their potential interactions on the reaction products, specifically the production of CO and CH4. It was found that, for the explored range, the only statistically significant parameter is temperature, with an increase in temperature being correlated to enhanced production of both CO and CH4. Over the range of experimental settings explored, the MOF-derived TiO2 displays high selectivity towards CO (98%), with only a small amount of CH4 (2%) being produced. This is notable when compared to other state-of-the-art TiO2 based CO2 photoreduction catalysts, which often showcase lower selectivity. The MOF-derived TiO2 was found to have a peak production rate of 8.9 × 10-4 μmol cm-2 h-1 (2.6 μmol g-1 h-1) and 2.6 × 10-5 μmol cm-2 h-1 (0.10 μmol g-1 h-1) for CO and CH4, respectively. A comparison is made to commercial TiO2, P25 (Degussa), which was shown to have a similar activity towards CO production, 3.4 × 10-3 μmol cm-2 h-1 (5.9 μmol g-1 h-1), but a lower selectivity preference for CO (3 : 1 CH4 : CO) than the MOF-derived TiO2 material developed here. This paper showcases the potential for MIL-125-NH2 derived TiO2 to be further developed as a highly selective CO2 photoreduction catalyst for CO production.

Photocatalytic Synthesis of Hydrogen Peroxide from Molecular Oxygen and Water

Hydrogen peroxide is a powerful and green oxidant that allows for the oxidation of a wide span of organic and inorganic substrates in liquid media under mild reaction conditions, and forms only molecular water and oxygen as end products. Hydrogen peroxide is therefore used in a wide range of applications, for which the well-documented and established anthraquinone autoxidation process is by far the dominating production method at the industrial scale. As this method is highly energy consuming and environmentally costly, the search for more sustainable synthesis methods is of high interest. To this end, the article reviews the basis and the recent development of the photocatalytic synthesis of hydrogen peroxide. Different oxygen reduction and water oxidation mechanisms are discussed, as well as several kinetic models, and the influence of the main key reaction parameters is itemized. A large range of photocatalytic materials is reviewed, with emphasis on titania-based photocatalysts and on high-prospect graphitic carbon nitride-based systems that take advantage of advanced bulk and surface synthetic approaches. Strategies for enhancing the performances of solar-driven photocatalysts are reported, and the search for new, alternative, photocatalytic materials is detailed. Finally, the promise of in situ photocatalytic synthesis of hydrogen peroxide for water treatment and organic synthesis is described, as well as its coupling with enzymes and the direct in situ synthesis of other technical peroxides.

Photocatalytic C-N cross-coupling mediated by heterogeneous nickel-coordinated carbon nitride

An easy to prepare nickel-coordinated mesoporous graphitic carbon nitride (Ni-mpg-CN) was introduced as a heterogeneous photocatalyst, which efficiently accelerated the photocatalytic C-N cross-coupling of (hetero)aryl bromides and aliphatic amines, delivering the desired monoaminated products in good yields. In addition, the concise synthesis of the pharmaceutical tetracaine was accomplished in the final stage, further highlighting the practical applicability.

Green Light Photoelectrocatalysis with Sulfur-Doped Carbon Nitride: Using Triazole-Purpald for Enhanced Benzylamine Oxidation and Oxygen Evolution Reactions

Materials dictate carbon neutral industrial chemical processes. Visible-light photoelectrocatalysts from abundant resources will play a key role in exploiting solar irradiation. Anionic doping via pre-organization of precursors and further co-polymerization creates tuneable semiconductors. Triazole derivative-purpald, an unexplored precursor with sulfur (S) container, combined in different initial ratios with melamine during one solid-state polycondensation with two thermal steps yields hybrid S-doped carbon nitrides (C₃ N₄ ). The series of S-doped/C₃ N₄ -based materials show enhanced optical, electronic, structural, textural, and morphological properties and exhibit higher performance in organic benzylamine photooxidation, oxygen evolution, and similar energy storage (capacitor brief investigation). 50M-50P exhibits the highest photooxidation conversion (84 ± 3%) of benzylamine to imine at 535 nm - green light for 48 h, due to a discrete shoulder (≈700) nm, high sulfur content, preservation of crystal size, new intraband energy states, structural defects by layer distortion, and 10-16 nm pores with arbitrary depth. This work innovates by studying the concomitant relationships between: 1) the precursor decomposition while C₃ N₄ is formed, 2) the insertion of S impurities, 3) the S-doped C₃ N₄ property-activity relationships, and 4) combinatorial surface, bulk, structural, optical, and electronic characterization analysis. This work contributes to the development of disordered long-visible-light photocatalysts for solar energy conversion and storage.

Multistage Modulation Formation of Hydrophilic-Hydrophobic Boron Carbon Nitride Nanomaterials

Boron carbon nitride (BCN) ternary compounds are attractive due to their wide applications in adsorption, catalysis, protective coatings, etc. A simple way is provided to synthesize BCN materials with multistage modulation of hydrophilic-hydrophobic properties. Hydrophilic BCN nanoparticles with a contact angle of 31° and nearly superhydrophobic BCN sheets with a contact angle of 145° are obtained. The participation of a CuO additive in the synthesis process has the role of tuning morphologies, components, and properties of BCN materials. The addition of CuO would improve the hydrophobicity of BCN due to its microstructure with enhanced surface roughness. The interaction between melamine and boric acid on the surface of CuO(111) is investigated by first-principles calculations based on density functional theory (DFT). The tuned BCN materials have different photoelectric properties also, and their performance as photocatalysts has been verified in photocatalytic reactions for hydrogen from water. The achieved uniform hydrophilic BCN nanoparticles and hydrophobic BCN sheets have the potential for further practical applications.

Incorporation of ultrathin porous metal-free graphite carbon nitride nanosheets in polyvinyl chloride for efficient photodegradation

Solid-phase photocatalytic degradation of waste plastics is one of the promising approaches to solve the "white pollution" problem. In this work, a low cost, metal-free, environmentally friendly organic photocatalyst, graphite carbon nitride (g-C₃N₄), was used for the first time to successfully enhance the photodegradation of polyvinyl chloride (PVC) under simulated sunlight from its visible light photocatalytic capability, while its organic nature and abundant surface functional groups were beneficial for its good dispersion in plastics. It was found that the ultrathin porous g-C₃N₄ nanosheet synthesized from urea (the UCN sample) had much stronger photodegradation effect in PVC/g-C₃N₄ composite films than its thick block counterpart synthesized with melamine (the MCN sample) due to its larger specific surface area, higher pore volume, and enhanced photogenerated charge carrier separation. With the incorporation of only 1 wt% UCN sample into PVC, its mechanical properties were largely enhanced with the tensile strength increase of ∼ 45% and the elongation at break increase of ∼ 72%, and its weight loss increased ∼ 58% after 120 h irradiation in the weather resistance test chamber. ^·O₂^- and h⁺ produced by the UCN sample were found as the main active species in the photocatalytic degradation of PVC to dechlorinate PVC and decompose its long-chain molecules into short-chain small molecules until its final degradation into CO₂ and H₂O under ideal conditions.

Two dimensional architectures of graphitic carbon nitride with the substitution of heteroatoms for bifunctional electrochemical detection of nilutamide

The exploration of graphitic carbon nitride (g-C₃N₄), a two-dimensional (2D) metal-free polymer semiconducting material, is largely discussed due to its large specific surface area, high electrical conductivity, thermal stability, and adaptable electronic structure. The adaption of sulfur (S) and phosphorous (P) atoms into the layers of g-C₃N₄ increases the electrochemical performance of detecting nilutamide (NT). The aggregation severity can be decreased by integrating S/P into g-C₃N₄, thereby improving surface area and electrical conductance. The g-C₃N₄, S/gC₃N₄, P/g-C₃N₄, and S/P/g-C₃N₄ were studied with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM), Fourier transform infrared (FTIR), Ultraviolet visible spectroscopy (UV), Thermogravimetric analysis (TGA), and Brunauer-Emmett-Teller (BET). The well-assigned S/P/g-C₃N₄ exhibited a good crystalline structure with more active sites for improved electron transfer toward NT detection. Both differential pulse voltammetry (DPV) and amperometry (IT) was studied for NT detection. The electrochemical studies were done with a linear range of 0.019-1.17 μM to 5.36-1891.98 μM in DPV and 0.01 μM-158.3 μM in IT technique. The attained limit of detection in DPV analysis was 3.2 nM and with IT analysis 2.4 nM. The nanocomposite S/P/g-C₃N₄ shows good selectivity towards NT. The fabricated electrode showed excellent repeatability, reproducibility, and stability, with a significant recovery range in real sample analysis.

Polymeric graphitic carbon nitride layers decorated with erbium oxide and enhanced photocatalytic performance under visible light irradiation

Developing and implementing visible light active organic-inorganic hybrid semiconductor nanomaterials with enhanced photocatalytic properties find newer environmental and energy treatment capabilities. Here, we are reporting polymeric g-C₃N₄ layers coated with different propositions of erbium oxide nanoparticles, characterized using XPS, UV-Vis-DRS, FT-IR, HR-TEM, FE-SEM, elemental mapping, XRD and surface area techniques and its photocatalytic activities were evaluated under visible light irradiations. The hybrid nanocomposite materials possess better crystalline nature and erbium oxide particles were on the surface of polymeric g-C₃N₄. The surface area and bandgap energy of the polymeric g-C₃N₄-erbium oxide (5 wt%) nanohybrid composite were 99.9 m²/g and 2.52 eV. The photocatalytic activities as prepared nanohybrid composites were assessed for the oxidation of orange G dye molecules in the presence of visible light and were highly active in a broader range of pH with the presence of various inorganic anions. The rate of photocatalytic oxidation of dye molecules varied from 4.79 × 10^-4 to 1.77 × 10^-4 min^-1 for the initial concentration of 5 to 20 ppm and retained its activities above 95% up to three cycles of reusability. Hence, the organic-inorganic novel catalytic nanohybrid composite may find more comprehensive applications in the area of environmental and energy applications.

Facile Construction of Intramolecular g-CN-PTCDA Donor-Acceptor System for Efficient CO2 Photoreduction

Due to the different electron affinity, the construction of a donor-acceptor (DA) system in the graphitic carbon nitride (g-CN) matrix is an attractive tactic to accelerate photo-induced electron-holes separation, and then further elevate its photocatalytic performance. In this work, perylene tetracarboxylic dianhydride (PTCDA) with magnificent electron affinity and excellent thermal stability was chosen to copolymerize with urea via facile one-pot thermal copolymerization to fabricate g-CN-PTCDA equipped with DA structures. The specific surface area of g-CN-PTCDA would be enlarged and the visible light absorption range would be broadened simultaneously when adopting this copolymerization strategy. A series of characterizations such as electron paramagnetic resonance (EPR), steady and transient photoluminescence spectra (PL), electrochemical impedance spectroscopy (EIS), and photocurrent tests combined with computational simulation confirmed the charge separation and transfer efficiency dramatically improved due to the DA structures construction. When 0.25% wt PTCDA was introduced, the CO evolution rate was nearly 23 times than that of pristine g-CN. The CO evolution rate could reach up to 87.2 μmol g−1 h−1 when certain Co2+ was added as co-catalytic centers. Meanwhile, g-CN-1 mg PTCDA-Co exhibited excellent long-term stability and recyclability as a heterogeneous photocatalyst. This research may shed light on designing more effective DA structures for solar-to-energy conversion by CO2 reduction.