A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils

Risk assessment of toxic and hazardous metals in paddy agroecosystem by biochar-for bio-membrane applications

Toxic and carcinogenic metal (loid)s, such arsenic (As) and cadmium (Cd), found in contaminated paddy soils pose a serious danger to environmental sustainability. Their geochemical activities are complex, making it difficult to manage their contamination. Rice grown in Cd and As-polluted soils ends up in people's bellies, where it can cause cancer, anemia, and the deadly itai sickness. Solving this issue calls for research into eco-friendly and cost-effective remediation technology to lower rice's As and Cd levels. This research delves deeply into the origins of As and Cd in paddy soils, as well as their mobility, bioavailability, and uptake mechanisms by rice plants. It also examines the current methods and reactors used to lower As and Cd contamination in rice. Iron-modified biochar (Fe-BC) is a promising technology for reducing As and Cd toxicity in rice, improving soil health, and boosting rice's nutritional value. Biochar's physiochemical characteristics are enhanced by the addition of iron, making it a potent adsorbent for As and Cd ions. In conclusion, Fe-BC's biomembrane properties make them an attractive option for remediating As- and Cd-contaminated paddy soils. More efficient mitigation measures, including the use of biomembrane technology, can be developed when sustainable agriculture practices are combined with these technologies.

Zinc and nano zinc mediated alleviation of heavy metals and metalloids in plants: an overview

Heavy metals and metalloids (HMs) contamination in the environment has heightened recently due to increasing global concern for food safety and human livability. Zinc (Zn2+ ) is an important nutrient required for the normal development of plants. It is an essential cofactor for the vital enzymes involved in various biological mechanisms of plants. Interestingly, Zn2+ has an additional role in the detoxification of HMs in plants due to its unique biochemical-mediating role in several soil and plant processes. During any exposure to high levels of HMs, the application of Zn2+ would confer greater plant resilience by decreasing oxidative stress, maintaining uptake of nutrients, photosynthesis productivity and optimising osmolytes concentration. Zn2+ also has an important role in ameliorating HMs toxicity by regulating metal uptake through the expression of certain metal transporter genes, targeted chelation and translocation from roots to shoots. This review examined the vital roles of Zn2+ and nano Zn in plants and described their involvement in alleviating HMs toxicity in plants. Moving forward, a broad understanding of uptake, transport, signalling and tolerance mechanisms of Zn2+ /zinc and its nanoparticles in alleviating HMs toxicity of plants will be the first step towards a wider incorporation of Zn2+ into agricultural practices.

Combined application of biochar and sulfur alleviates cadmium toxicity in rice by affecting root gene expression and iron plaque accumulation

Biochar and sulfur are considered useful amendments for soil cadmium (Cd) contamination remediation. However, there is still a gap in the understanding of how combined biochar and sulfur application affects Cd resistance in rice, and the role of the accumulation of iron plaque and the expression of Cd efflux transporter-related genes are still unclear in this type of treatment. In this study, we screened an effective combination of biochar and sulfur (0.75 % biochar, 60 mg/kg sulfur) that significantly reduced the Cd content of rice roots (32.9 %) and shoots (12.3 %); significantly reduced the accumulation of amino acids and their derivatives, organic acids and their derivatives and flavonoids in rice roots; and altered secondary metabolite production and release. This combined biochar and sulfur application alleviated the toxicity of Cd to rice, in which the enhancement of iron plaque (24.8 %) formation and upregulated expression of heavy metal effector genes (NRAMP3, MTP3, ZIP1) were important factors. These findings show that iron plaque and heavy metal transport genes are involved in the detoxification of rice under the combined application of biochar and sulfur, which provides useful information for the combined treatment of soil Cd pollution.

Natural surfactant mediated bioremediation approaches for contaminated soil

The treatment of environmental pollution by employing microorganisms is a promising technology, termed bioremediation, which has several advantages over the other established conventional remediation techniques. Consequently, there is an urgent inevitability to develop pragmatic techniques for bioremediation, accompanied by the potency of detoxifying soil environments completely. The bioremediation of contaminated soils has been shown to be an alternative that could be an economically viable way to restore polluted soil. The soil environments have long been extremely polluted by a number of contaminants, like agrochemicals, polyaromatic hydrocarbons, heavy metals, emerging pollutants, etc. In order to achieve a quick remediation overcoming several difficulties the utility of biosurfactants became an excellent advancement and that is why, nowadays, the biosurfactant mediated recovery of soil is a focus of interest to the researcher of the environmental science field specifically. This review provides an outline of the present scenario of soil bioremediation by employing a microbial biosurfactant. In addition to this, a brief account of the pollutants is highlighted along with how they contaminate the soil. Finally, we address the future outlook for bioremediation technologies that can be executed with a superior efficiency to restore a polluted area, even though its practical applicability has been cultivated tremendously over the few decades.

State-of-the-art adsorption and adsorptive filtration based technologies for the removal of trace elements: A critical review

Water and wastewater are contaminated with various types of trace elements that are released from industrial activities. Their presence, at concentrations above the permissible limit, will cause severe negative impacts on human health and the environment. Due to their cost-effectiveness, simple design, high efficiency, and selectivity, adsorption, and adsorptive filtration are techniques that have received lots of attention as compared to other water treatment techniques. Adsorption isotherms and kinetic studies help to understand the mechanisms of adsorption and adsorption rates, which can be used to develop and optimize different adsorbents. This state-of-the-art review provides and combines the advancements in different conventional and advanced adsorbents, biosorbents, and adsorptive membranes for the removal of trace elements from water streams. Herein, this review discusses the sources of different trace elements and their impact on human health. The review also covers the adsorption technique with a focus on various advanced adsorbents, their adsorption capacities, and adsorption isotherm modeling in detail. In addition, biosorption is critically discussed together with its mechanisms and biosorption isotherms. In the end, the application of various advanced adsorptive membranes is discussed and their comparison with adsorbents and biosorbents is systematically presented.

In-situ physical and chemical remediation of Cd and Pb contaminated mine soils cultivated with Chinese cabbage: A three-year field study

Soils pollution with heavy metals (HMs) is a serious concern due to their toxic effects on crop yield, crop quality, soil environment, and human health. In the current study, four stabilizers of calcium carbonate (CC), dolomite (DL), zeolite (ZL), and steel slag (SS) were applied to cadmium (Cd) and lead (Pb)-contaminated soils as in-situ chemical remediation techniques along with in-situ physical remediation techniques i.e. soil covering (SC) and soil dilution (SD) under real field conditions. For three years, Chinese cabbage (Brassica rapa L.) was grown on the amended fields to examine how the amendments impacted Cd and Pb uptake in plants. The stabilization efficiency of SS, CC, and SC were 75.7 %, 66.0 %, and 71.1 %, respectively, for Cd, and 55.6 %, 55.6 %, and 70.0 %, respectively, for Pb. Results indicated that stabilizer soil amendments significantly decreased the exchangeable (F1) and carbonates bound (F2) fractions of both Cd and Pb. For instance, F1 fraction of Cd decreased from 10.2 (control) to 1.8-2.9 % (with stabilizers). The stabilizers increased Chinese cabbage dry weight by 11.4-22.5 % and decreased Cd and Pb uptake by 67.4 % and 24 %, respectively. The results demonstrated that in-situ chemical remediation technique showed promising results and maintained its efficiency for more than 130 weeks. Current study indicated that chemical remediation of Cd and Pb contaminated soil is more effective and last longer than physical remediation.

Bacterial seed endophyte and abiotic factors influence cadmium accumulation in rice (Oryza sativa) along the Yangtze River area

Cadmium (Cd) contamination in rice (Oryza sativa) is particularly problematic due to its high risk to human health. Investigating the hidden roles of seed endophytes of rice in influencing Cd accumulation is essential to comprehensively understand the effects of biotic and abiotic factors to food security. Here, the content of Cd in soils and rice (Huanghuazhan) seeds from 19 sites along the Yangtze River exhibited considerable differences. From a biotic perspective, we observed the dominant endophytic bacteria, Stenotrophomonas (7.25 %), contribute to Cd control of rice (below 0.2 mg kg-1). Partial Least Squares (PLS) analysis further suggested that Enterobacteriaceae (15.48 %), altitude and pH were found to be the strong variables that might reduce the Cd uptake of rice. In contrast, Cytophagaceae (0.58 %), latitude and mean annual air pressure had the opposite effect. In pot experiments, after respectively inoculating the isolated endophytic bacteria Stenotrophomonas T4 and Enterobacter R1, N1 (f_Enterobacteriaceae), the Cd contents in shoot decreased by 47.6 %, 21.9 % and 33.0 % compared to controls. The distribution of Cd resistant genes (e.g., czcABC, nccAB, cznA) of Stenotrophomonas, Enterobacteriaceaea and Cytophagaceae further suggested their distinct manners in influencing the Cd uptake of rice. Overall, this study provides new insights into the food security threatened by globally widespread Cd pollution.

Role of Arbuscular Mycorrhizal Fungi in Regulating Growth, Enhancing Productivity, and Potentially Influencing Ecosystems under Abiotic and Biotic Stresses

Arbuscular mycorrhizal fungi (AMF) form symbiotic relationships with the roots of nearly all land-dwelling plants, increasing growth and productivity, especially during abiotic stress. AMF improves plant development by improving nutrient acquisition, such as phosphorus, water, and mineral uptake. AMF improves plant tolerance and resilience to abiotic stressors such as drought, salt, and heavy metal toxicity. These benefits come from the arbuscular mycorrhizal interface, which lets fungal and plant partners exchange nutrients, signalling molecules, and protective chemical compounds. Plants' antioxidant defence systems, osmotic adjustment, and hormone regulation are also affected by AMF infestation. These responses promote plant performance, photosynthetic efficiency, and biomass production in abiotic stress conditions. As a result of its positive effects on soil structure, nutrient cycling, and carbon sequestration, AMF contributes to the maintenance of resilient ecosystems. The effects of AMFs on plant growth and ecological stability are species- and environment-specific. AMF's growth-regulating, productivity-enhancing role in abiotic stress alleviation under abiotic stress is reviewed. More research is needed to understand the molecular mechanisms that drive AMF-plant interactions and their responses to abiotic stresses. AMF triggers plants' morphological, physiological, and molecular responses to abiotic stress. Water and nutrient acquisition, plant development, and abiotic stress tolerance are improved by arbuscular mycorrhizal symbiosis. In plants, AMF colonization modulates antioxidant defense mechanisms, osmotic adjustment, and hormonal regulation. These responses promote plant performance, photosynthetic efficiency, and biomass production in abiotic stress circumstances. AMF-mediated effects are also enhanced by essential oils (EOs), superoxide dismutase (SOD), peroxidase (POD), ascorbate peroxidase (APX), hydrogen peroxide (H2O2), malondialdehyde (MDA), and phosphorus (P). Understanding how AMF increases plant adaptation and reduces abiotic stress will help sustain agriculture, ecosystem management, and climate change mitigation. Arbuscular mycorrhizal fungi (AMF) have gained prominence in agriculture due to their multifaceted roles in promoting plant health and productivity. This review delves into how AMF influences plant growth and nutrient absorption, especially under challenging environmental conditions. We further explore the extent to which AMF bolsters plant resilience and growth during stress.

Adsorption of ibuprofen using waste coffee derived carbon architecture: Experimental, kinetic modeling, statistical and bio-inspired optimization

Pharmaceuticals in water are a growing environmental concern, as they can harm aquatic life and human health. To address this issue, an adsorbent made from coffee waste that effectively removes ibuprofen (a common pharmaceutical pollutant) from wastewater was developed. The experimental adsorption phase was planned using a Design of Experiments approach with Box-Behnken strategy. The relation between the ibuprofen removal efficiency and various independent variables, including adsorbent weight (0.01-0.1 g) and pH (3-9), was evaluated via a regression model with 3-level and 4-factors using the Response surface methodology (RSM) . The optimal ibuprofen removal was achieved after 15 min using 0.1 g adsorbent at 32.4 °C and pH = 6.9. Moreover, the process was optimized using two powerful bio-inspired metaheuristics (Bacterial Foraging Optimization and Virus Optimization Algorithm). The adsorption kinetics, equilibrium, and thermodynamics of ibuprofen onto waste coffee-derived activated carbon were modeled at the identified optimal conditions. The Langmuir and Freundlich adsorption isotherms were implemented to investigate adsorption equilibrium, and thermodynamic parameters were also calculated. According to the Langmuir isotherm model, the adsorbent's maximum adsorption capacity was 350.00 mg g-1 at 35 °C. The findings revealed that the ibuprofen adsorption was well-matched with the Freundlich isotherm model, indicating multilayer adsorption on heterogeneous sites. The computed positive enthalpy value showed the endothermic nature of ibuprofen adsorption at the adsorbate interface.

Development of cellulose/hydroxyapatite/TiO2 scaffolds for efficient removal of lead (II) ions pollution: Characterization, kinetic analysis, and artificial neural network modeling

The utilization of nano-biodegradable composites for removing pollutants and heavy metals in aquatic environments has been widespread. This study focuses on synthesizing cellulose/hydroxyapatite nanocomposites with titanium dioxide (TiO2) via the freeze-drying method for the adsorption of lead ions in aquatic environments. The physical and chemical properties of the nanocomposites, including structure, morphology, and mechanical properties, were analyzed through FTIR, XRD, SEM, and EDS. In addition, parameters affecting the adsorption capacity, such as time, temperature, pH, and initial concentration, were determined. The nanocomposite exhibited a maximum adsorption capacity of 1012 mg⸱g-1, and the second-order kinetic model was found to govern the adsorption process. Additionally, an artificial neural network (ANN) was created using weight percentages (wt%) of nanoparticles included in the scaffold to predict the mechanical behavior, porosity, and desorption of the scaffolds at various weight percentages of hydroxyapatite (nHAP) and TiO2. The results of the ANN indicated that the incorporation of both single and hybrid nanoparticles into the scaffolds improved their mechanical behavior and desorption, as well as increased their porosity.

Physicochemical Effects of Sulfur Precursors on Sulfidated Amorphous Zero-Valent Iron and Its Enhanced Mechanisms for Cr(VI) Removal

Amorphous zerovalent iron (AZVI) has gained considerable attention due to its remarkable reactivity, but there is limited research on sulfidated amorphous zerovalent iron (SAZVI) and the influence of different sulfur precursors on its reactivity remains unclear. In this study, SAZVI materials with an amorphous structure were synthesized using various sulfur precursors, resulting in significantly increased specific surface area and hydrophobicity compared to AZVI. The Cr(VI) removal efficiency of SAZVI-Na₂S, which exhibited the most negative free corrosion potential (-0.82 V) and strongest electron transfer ability, was up to 8.5 times higher than that of AZVI. Correlation analysis revealed that the water contact angle (r = 0.87), free corrosion potential (r = -0.92), and surface Fe(II) proportion (r = 0.98) of the SAZVI samples played crucial roles in Cr(VI) removal. Furthermore, the enhanced elimination ability of SAZVI-Na₂S was analyzed, primarily attributed to the adsorption of Cr(VI) by the FeS_x shell, followed by the rapid release of internal electrons to reduce Cr(VI) to Cr(III). This process ultimately led to the precipitation of FeCr₂O₄ and Cr₂S₃ on the surface of SAZVI-Na₂S, resulting in their removal from the water. This study provides insights into the influence of sulfur precursors on the reactivity of SAZVI and offers a new strategy for designing highly active AZVI for efficient Cr(VI) removal.

Microbial biochemical pathways of arsenic biotransformation and their application for bioremediation

Arsenic is a ubiquitous toxic metalloid, the concentration of which is beyond WHO safe drinking water standards in many areas of the world, owing to many natural and anthropogenic activities. Long-term exposure to arsenic proves lethal for plants, humans, animals, and even microbial communities in the environment. Various sustainable strategies have been developed to mitigate the harmful effects of arsenic which include several chemical and physical methods, however, bioremediation has proved to be an eco-friendly and inexpensive technique with promising results. Many microbes and plant species are known for arsenic biotransformation and detoxification. Arsenic bioremediation involves different pathways such as uptake, accumulation, reduction, oxidation, methylation, and demethylation. Each of these pathways has a certain set of genes and proteins to carry out the mechanism of arsenic biotransformation. Based on these mechanisms, various studies have been conducted for arsenic detoxification and removal. Genes specific for these pathways have also been cloned in several microorganisms to enhance arsenic bioremediation. This review discusses different biochemical pathways and the associated genes which play important roles in arsenic redox reactions, resistance, methylation/demethylation, and accumulation. Based on these mechanisms, new methods can be developed for effective arsenic bioremediation.

Heavy metal pollution in the aquatic environment: efficient and low-cost removal approaches to eliminate their toxicity: a review

Heavy metal contamination of water sources has emerged as a major global environmental concern, threatening both aquatic ecosystems and human health. Heavy metal pollution in the aquatic environment is on the rise due to industrialization, climate change, and urbanization. Sources of pollution include mining waste, landfill leachates, municipal and industrial wastewater, urban runoff, and natural phenomena such as volcanic eruptions, weathering, and rock abrasion. Heavy metal ions are toxic, potentially carcinogenic, and can bioaccumulate in biological systems. Heavy metals can cause harm to various organs, including the neurological system, liver, lungs, kidneys, stomach, skin, and reproductive systems, even at low exposure levels. Efforts to find efficient methods to remove heavy metals from wastewater have increased in recent years. Although some approaches can effectively remove heavy metal contaminants, their high preparation and usage costs may limit their practical applications. Many review articles have been published on the toxicity and treatment methods for removing heavy metals from wastewater. This review focuses on the main sources of heavy metal pollution, their biological and chemical transformation, toxicological impacts on the environment, and harmful effects on the ecosystem. It also examines recent advances in cost-effective and efficient techniques for removing heavy metals from wastewater, such as physicochemical adsorption using biochar and natural zeolite ion exchangers, as well as decomposition of heavy metal complexes through advanced oxidation processes (AOPs). Finally, the advantages, practical applications, and future potential of these techniques are discussed, along with any challenges and limitations that must be considered.

Evaluation of heavy metals contamination in cereals, vegetables and fruits with probabilistic health hazard in a highly polluted megacity

Heavy metals (HMs) contamination in foodstuffs could pose serious health issues for public health and humans are continually exposed to HMs through the consumption of cereals, fruits, and vegetables. The present study was conducted to assess 11 HMs in foodstuffs to investigate pollution levels and health risks to children and adults. The mean contents of Cd, Cr, Cu, Ni, Zn, Fe, Pb, Co, As, Mn and Ba in foodstuffs were 0.69, 2.73, 10.56, 6.60, 14.50, 9.63, 2.75, 0.50, 0.94, 15.39 and 0.43 mg/kg, respectively and the concentration of Cd, Cr, Cu, Ni and Pb were higher than maximum permissible concentrations (MPCs) showing that these foods may be contaminated with metals and constitute a danger to consumers. Vegetables had relatively higher metal contents followed by cereals and fruits. The average value of the Nemerrow composite pollution index (NCPI) for cereals, fruits, and vegetables were 3.99, 6.53, and 11.34, respectively indicating cereal and fruits were moderately contaminated whereas vegetables were heavily contaminated by the studied metals. The total estimated daily and weekly intakes for all studied metals were higher than the maximum tolerable daily intake (MTDI) and provisional tolerance weekly intake (PTWI) recommended by FAO/WHO. The target hazard quotients and hazard index of all studied metals exceeded the standard limit for adults and children suggesting significant non-carcinogenic health hazards. The total cancer risk value of Cd, Cr, Ni, Pb, and As from food intake exceeded the threshold range (1.0E-04), suggesting potential carcinogenic risks. Based on practical and sensible evaluation techniques, the current work will assist policymakers in controlling metal contamination in foodstuffs.

Green remediation of Ni, Zn, and Cu in an electroplating contaminated site by wood vinegar with optimization and risk assessment

Wood vinegar (WV) is a renewable organic compound, possessing characteristics such as high oxygenated compound content and low negative impact on soil. Based on its weak acid properties and complexing ability to potentially toxic elements (PTEs), WV was used to leach Ni, Zn, and Cu contaminated soil in electroplating sites. In addition, the response surface methodology (RSM) based on the Box-Behnken design (BBD) was established to clarify the interaction between each single factor, and finally completed the risk assessment of the soil. The amounts of PTEs leached from the soil climbed with the increase of WV concentration, liquid-solid ratio, and leaching time, while they surged with the decrease of pH. Under optimal leaching circumstances (the concentration of WV= 100 %; washing time= 919 min; pH= 1.00), the removal rates of Ni, Zn, and Cu could reach 91.7 %, 57.8 %, and 65.0 %, respectively, and the WV-extracted PTEs were mainly from the Fe-Mn oxides fraction. After leaching, the Nemerow integrated pollution index (NIPI) decreased from an initial value of 7.08 (indicating severe pollution) to 0.450 (indicating no pollution). The potential ecological risk index (RI) dropped from 274 (medium level) to 39.1 (low level). Additionally, the potential carcinogenic risk (CR) values reduced by 93.9 % for both adults and children. The results revealed that the washing process significantly reduced the pollution level, potential ecological risk, and health risk. Coupled with FTIR and SEM-EDS analysis, the mechanism of WV removal of PTEs could be explained from three aspects: acid activation, H⁺ ion exchange, and functional group complexation. In summary, WV is an eco-friendly and high-efficiency leaching material for the remediation of PTEs polluted sites, which will maintain soil function and protect human health.

The accessibility, necessity, and significance of certified reference materials for total selenium content and its species to improve food laboratories' performance

Micronutrients are one of the most important groups of nutrients that our body needs daily in trace amounts to tackle deficiencies. Selenium (Se) is a mineral that occurs naturally in foods and is an essential component of selenoproteins that support the healthy functioning of the human body. Therefore, monitoring dietary Se concentrations must be a higher priority to meet daily intakes. Fulfillment can be addressed through applying various analytical techniques, and the certified reference materials (CRMs) tool plays a crucial role in quality assurance/quality control (QA/QC). The availability of certified CRMs for total Se content with addition to their species is presented. The review emphasizes the necessity of incorporating more food matrix CRMs certifying Se species, apart from total Se content, to meet method validation requirements for food analysis laboratories. This would help CRM producers bridge the gap between available food matrix materials that are not certified for Se species.

Effects of intercropping on safe agricultural production and phytoremediation of heavy metal-contaminated soils

Intercropping with hyperaccumulators is believed to be an important and efficient way to achieve simultaneous safe agricultural production and phytoremediation of polluted soils. However, some studies have suggested that this technique might facilitate the uptake of heavy metals by crops. To investigate the effects of intercropping on the heavy metal contents of plants and soil, data from 135 global studies were collected and analyzed by meta-analysis. The results showed that intercropping could significantly reduce the contents of heavy metals in the main plants and soils. Plant species was the main factor that affected plant and soil metal contents in the intercropping system, and the heavy metal content could be significantly reduced when members of the Poaceae and Crassulaceae were used as main plants or when legumes were used as intercropped plants. Among all the intercropped plants, the best one for removing heavy metals from the soil was a Crassulaceae hyperaccumulator. These results not only highlight the main factors affecting intercropping systems but also provide reliable reference information for the practice of safe agricultural production coupled with phytoremediation of heavy metal-contaminated farmland.

Portable Bulk-Water Disinfection by Live Capture of Bacteria with Divergently Branched Porous Graphite in Electric Fields

Easy access to clean water is essential to functioning and development of modern society. However, it remains arduous to develop energy-efficient, facile, and portable water treatment systems for point-of-use (POU) applications, which is particularly imperative for the safety and resilience of society during extreme weather and critical situations. Here, we propose and validate a meritorious working scheme for water disinfection via directly capturing and removing pathogen cells from bulk water using strategically designed three-dimensional (3D) porous dendritic graphite foams (PDGFs) in a high-frequency AC field. The prototype, integrated in a 3D-printed portable water-purification module, can reproducibly remove 99.997% E. coli bacteria in bulk water at a few voltages with among the lowest energy consumption at 435.5 J·L^-1_. The PDGFs, costing $1.47 per piece, can robustly operate at least 20 times for more than 8 h in total without functional degradation. Furthermore, we successfully unravel the involved disinfection mechanism with one-dimensional Brownian dynamics simulation. The system is practically applied that brings natural water in Waller Creek at UT Austin to the safe drinking level. This research, including the working mechanism based on dendritically porous graphite and the design scheme, could inspire a future device paradigm for POU water treatment.

Metal pollution in freshwater fish: A key indicator of contamination and carcinogenic risk to public health

Metals are micropollutants that cannot be degraded by microorganisms and are infiltrated into various environmental media, including both freshwater and marine water. Metals from polluted water are absorbed by many aquatic species, especially fish. Fish is a staple food in the diets of many regions in the world; hence, both the type and concentration of metals accumulated and transferred from contaminated water sources to fish must be determined and assessed. In this study, the heavy metal concentration was determined and assessed in fish collected from freshwater sources via published literature and Estimated of Daily Intake (EDI), Target hazard quotient (THQ), and Carcinogenic Risk (CR) analyses, aiming to examine the metal pollution in freshwater fish. The fish was used as a bioindicator, and Geographic information system (GIS)was sued to map the polluted regions. The results confirmed that Pb was detected in fish sampled at 28 locations, Cr at 24 locations, Cu and Zn at 30 locations, with values Pb detected ranging from 0.0016 mg kg^-1 to 44.3 mg kg^-1, Cr detected ranging from 0.07 mg kg^-1 to 27 mg kg^-1, Cu detected ranging from 0.031 mg kg^-1 to 35.54 mg kg-¹, and Zn detected ranging from 0.242 mg kg^-1 to 103.2 mg kg^-1. The strongest positive associations were discovered between Cu-Zn (r = 0.74, p < 0.05) and Cr-Zn (r = 0.57, p < 0.05). Spatial distribution maps depicting the consumption of fish as food and its corresponding Pb and Cr intake revealed a higher incidence of both carcinogenic and non-carcinogenic health concerns attributed to Pb and Cr in the region with populations consuming the fish.

Untreated Opuntia ficus indica for the Efficient Adsorption of Ni(II), Pb(II), Cu(II) and Cd(II) Ions from Water

The raw cladode of Opuntia ficus indica (OFI) was evaluated as a sustainable biosorbent for the removal of heavy metals (Ni, Pb, Cu, and Cd) from aqueous solutions. The functional groups of OFI were identified by employing DRIFT-FTIR and CP-MAS-NMR techniques before and after contact with the ions in an aqueous media, showing a rearrangement of the biomass structure due to the complexation between the metal and the functional groups. The adsorption process was studied in both single- and multi-component systems under batch conditions at different pHs (4.0, 5.0, and 6.0), different metal concentrations, and different biomass amounts. The results show that the raw OFI had a removal capacity at room temperature of over 80% for all metals studied after only 30 min of contact time, indicating a rapid adsorption process. Biosorption kinetics were successfully fitted by the pseudo-second-order equation, while Freundlich correctly modelled the biosorption data at equilibrium. The results of this work highlight the potential use of the untreated cladode of OFI as an economical and environmentally friendly biosorbent for the removal of heavy metals from the contaminated aqueous solution.

Hydrogeochemical evaluation, groundwater contamination and associated health risk in southern Tangail, Bangladesh

Water pollution is a worldwide concern that has growing severe in developed and developing nations. Increasing groundwater pollution threatening both the physical and environmental health of billions of people as well as economic progress. Consequently, hydrogeochemistry, water quality and potential health risk assessment is crucial for water resource management. The study area comprises Jamuna Floodplain (Holocene deposit) area in the west and the Madhupur tract (Pleistocene deposit) area in the eastern part. Total 39 groundwater samples were collected from the study area and were analyzed for physicochemical parameters, hydrogeochemical, trace metals, and isotopic composition. The water types are mainly Ca-HCO₃^- to Na-HCO₃^- types. The isotopic compositions (δ¹⁸O and δ²H) analysis traces the recent recharge in Floodplain area from rainwater and no recent recharge in Madhupur tract. The concentration of NO₃^-, As, Cr, Ni, Pb, Fe, and Mn in shallow and intermediate aquifer at the Floodplain area exceed the WHO-2011 permissible limit and is lower at deep Holocene and Madhupur tract aquifer. The integrated weighted water quality index (IWQI) exposed groundwater from shallow and intermediate aquifer are unsuitable for drinking and deep Holocene aquifer and Madhupur tract are suitable for drinking purposes. PCA analysis confirmed that anthropogenic activity is dominant in shallow and intermediate aquifers. The non-carcinogenic and carcinogenic risk for adults and children is due to oral and dermal exposure. The non-carcinogenic risk evaluation revealed that the mean hazard index (HI) values range from 0.009742 to 16.37 for adults and 0.0124-20.83 for children, respectively, and most groundwater samples from shallow and intermediate aquifers exceed the permissible limit (HI > 1). The carcinogenic risk ranges from 2.71 × 10^-6-0.014 for adults and 3.44 × 10^-6-0.017 for children via oral consumption and 7.09 × 10^-11-1.18 × 10^-6 for adults and 1.25 × 10^-10-2.09 × 10^-6 for children via dermal exposure. Spatial distribution shows the presence of trace metal and associated health risk is high in shallow and intermediate aquifer (Holocene) than in the deep (Holocene) Madhupur tract (Pleistocene). The study implies that effective water management will ensure safe drinking water for the future generation of people.

Heavy metal(loid)s contaminations in soils of Pakistan: a review for the evaluation of human and ecological risks assessment and spatial distribution

Heavy metal(loid)s (HM) contaminations in the soil poses threats to the human and ecological community due to their bioaccumulation, toxicity, and persistent nature in the ecosystem. This review was designed to know about the HM contamination in soils, ecological risk, distribution, and potential health risks. Soil HM concentrations published in the last 30 years were collected from Springer, Science Direct, Willey, Mendeley, ResearchGate, Google Scholar, etc. HM concentrations were used for the geo-accumulation index (Igeo), contamination factor, as well as integrated indices such as spatial distribution of ecological risk index. Similarly, the Igeo pattern was observed in Sindh > Baluchistan > Punjab > Khyber Pakhtunkhwa > Gilgit-Baltistan > Islamabad. Moreover, the high ecological risk mean values ranged (160 < ERI < 320) due to cadmium (Cd) was exhibited in the Punjab and Khyber Pakhtunkhwa provinces and Islamabad. Non-carcinogenic risk like hazard quotient was found higher for children (1.59) of Punjab due to arsenic (As) ingestion, whereas the lower risk was observed due to Zn (2.5E-08) for adults of Punjab province via inhalation pathway. Similarly, the health index (HI) from exposure to As (1.61) in soil was higher than the rest of the HM. Moreover, cancerous risk was determined and found in the tolerable range (10^-4-10^-6). This study recommended that HM contaminants in the soil need to be monitored on regular basis, especially in Baluchistan, Gilgit-Baltistan, and Sindh provinces.

Characterization of ionic liquids removing heavy metals from electroplating sludge: Influencing factors, optimisation strategies and reaction mechanisms

The disposal of electroplating sludge (ES) is a common concern of researchers. Currently, it is difficult to achieve effective fixation of heavy metals (HMs) using traditional ES treatment. As green and effective HMs removal agents, ionic liquids can be used for the disposal of ES. In this study, 1-butyl-3-methyl-imidazole hydrogen sulphate ([Bmim]HSO₄) and 1-propyl sulphonic acid-3-methyl imidazole hydrogen sulphate ([PrSO₃Hmim]HSO₄) were used as washing solvents for the removal of Cr, Ni, and Cu from ES. In reaction with increased agent concentration, solid-liquid ratio, and duration, the amount of HMs eliminated from ES rises, whereas opposite patterns were shown in response to rising pH. The quadratic orthogonal regression optimisation analysis also revealed that the ideal washing specifications for [Bmim]HSO₄ were 60 g L^-1, 1:40, and 60 min, respectively, for agent concentration, solid-liquid ratio, and washing time, while those for [PrSO₃Hmim]HSO₄ were 60 g L^-1, 1:35, and 60 min, respectively. Under the optimal experimental conditions, the Cr, Ni, and Cu removal efficiencies for [Bmim]HSO₄ were 84.3, 78.6, and 89.7%, respectively, and those values for [PrSO₃Hmim]HSO₄ were 99.8, 90.1, and 91.3%, respectively. This was mainly attributed to that ionic liquids enhance metal desorption through acid solubilisation, chelation, and electrostatic attraction. Overall, ionic liquids are reliable washing reagents for ES contaminated by HMs.

Effect of Anthropogenic Disturbances on the Microbial Relationship during Bioremediation of Heavy Metal-Contaminated Sediment

Soil, sediment, and waters contaminated with heavy metals pose a serious threat to ecosystem function and human health, and microorganisms are an effective way to address this problem. In this work, sediments containing heavy metals (Cu, Pb, Zn, Mn, Cd, As) were treated differently (sterilized and unsterilized) and bio-enhanced leaching experiments were carried out with the addition of exogenous iron-oxidizing bacteria A. ferrooxidans and sulfur-oxidizing bacteria A. thiooxidans. The leaching of As, Cd, Cu, and Zn was higher in the unsterilized sediment at the beginning 10 days, while heavy metals leached more optimally in the later sterilized sediment. The leaching of Cd from sterilized sediments was favored by A. ferrooxidans compared to A. thiooxidans. Meanwhile, the microbial community structure was analyzed using 16S rRNA gene sequencing, which revealed that 53.4% of the bacteria were Proteobacteria, 26.22% were Bacteroidetes, 5.04% were Firmicutes, 4.67% were Chlamydomonas, and 4.08% were Acidobacteria. DCA analysis indicated that microorganisms abundance (diversity and Chao values) increased with time. Furthermore, network analysis showed that complex networks of interactions existed in the sediments. After adapting to the acidic environmental conditions, the growth of some locally dominant bacteria increased the microbial interactions, allowing more bacteria to participate in the network, making their connections stronger. This evidence points to a disruption in the microbial community structure and its diversity following artificial disturbance, which then develops again over time. These results could contribute to the understanding of the evolution of microbial communities in the ecosystem during the remediation of anthropogenically disturbed heavy metals.

Antimony and naphthalene can be simultaneously leached from a combined contaminated soil using carboxymethyl-β-cyclodextrin as a biodegradable eluant

In this study, we have investigated the removal efficiency of antimony (Sb) and naphthalene (Nap) from a combined contaminated soil by carboxymethyl-β-cyclodextrin (CMCD) leaching and reveal its remediation mechanisms by FTIR and ¹H NMR analyses. The results show that the highest removal efficiencies of Sb and Nap were 94.82% and 93.59%, respectively, with a CMCD concentration of 15 g L^-1 at a pH of 4 and a leaching rate of 2.00 mL min^-1 over an interval-time of 12 h. The breakthrough curves show that CMCD had a stronger inclusion capacity of Nap than Sb, and Sb could enhance the adsorption capacity of Nap, while Nap weakened the adsorption of Sb during CMCD leaching. Furthermore, the FTIR analysis suggests that the removal of Sb from combined contaminated soil involved complexation with the carboxyl and hydroxyl groups on CMCD, and the NMR analysis suggests that the inclusion of Nap occurred. These results indicate that CMCD is a good eluant for remediating soil contaminated by a combination of heavy metals and polycyclic aromatic hydrocarbons (PAHs), and its remediation mechanisms depend on the complexation reactions between the surface functional groups and inclusion reactions in the internal cavities.

A new strategy for treating Pb2+ and Zn2+ pollution with industrial waste derivatives Humin

Metal pollution caused by industrial waste accumulation is a long-term and far-reaching problem. Humin (HM), as a highly condensed organic component insoluble in alkaline or water solution, is often discarded as humic acid industrial waste. However, the abundant active functional groups in HM reported by some researches make it possible for HM to remove metals. In this study, a waste reuse strategy was proposed to reduce the pressure of industrial metal pollution on the environment. HM was obtained from lignite waste residue. Scanning electron microscopy, energy spectrum and Fourier infrared spectroscopy, combined with the adsorption models were employed to reveal the mechanism of HM adsorption. The results showed that HM had multiple adsorption mechanism and high biological stability. The adsorption capacity of HM to Zn²⁺ and Pb²⁺ were 194.88 mg/g and 289.59 mg/g respectively. HM adsorbed Zn²⁺ mainly by physical multilayer adsorption. And the adsorption of Pb²⁺ by HM was mainly a monolayer chemical reaction, which depended on its active functional groups and the exchange of valence electrons. Notably, HM could simultaneously remove Pb²⁺ and Zn²⁺ and almost did not affect its original adsorption capacity to single ions. These results will provide a new strategy for the treatment of metal pollution in the future and alleviate the pressure of multiple metal pollution of the environment.

Distribution, Risk Assessment, and Source Apportionment of Heavy Metal Pollution in Cultivated Soil of a Typical Mining Area in Southwest China

The present study investigates heavy metal pollution and its sources in cultivated soils in Bijie City, Guizhou Province, China. The ground accumulation index method was used to evaluate the associated risks, while correlation, principal component, and positive matrix factor model analyses were used to identify sources. The results show that the overall contamination levels, except for Cd, were not serious. Agricultural materials, industrial activities, transportation, coal combustion and atmospheric deposition, parent rock, and irrigation accounted for 19.66%, 14.11%, 14.54%, 16.33%, 20.70%, and 14.67% of the total accumulation of metals, respectively. Copper, Ni, Zn, and Cr came mainly from parent rocks; Pb was mainly from traffic emissions; Hg was mainly from coal deposition; As was mainly from irrigation; and Cd was mainly from industrial activities. The main sources of soil metals were irrigation, agricultural activities, and coal deposition in the east and industrial activities and soil-forming parent rocks in the west. Environ Toxicol Chem 2023;42:888-900. © 2023 SETAC.

Spatial and Temporal Variations of Heavy Metals' Bioavailability in Soils Regulated by a Combined Material of Calcium Sulfate and Ferric Oxide

Heavy metal pollution in soils threatens food safety and human health. Calcium sulfate and ferric oxide are commonly used to immobilize heavy metals in soils. However, the spatial and temporal variations of the heavy metals' bioavailability in soils regulated by a combined material of calcium sulfate and ferric oxide (CSF) remain unclear. In this work, two soil column experiments were conducted to investigate the spatial and temporal variations of CSF immobilized Cd, Pb, and As. In the horizontal soil column, the results showed that CSF's immobilization range for Cd increased over time, and adding CSF in the center of the soil column decreased the concentrations of bioavailable Cd significantly, up to 8 cm away by day 100. The CSF immobilization effect on Pb and As only existed in the center of the soil column. The CSF's immobilization depths for Cd and Pb in the vertical soil column increased over time and extended to 20 cm deep by day 100. However, the CSF's immobilization depths for As only extended to between 5 and 10 cm deep after 100 days of incubation. Overall, the results from this study can serve as a guide to determine the CSF application frequency and spacing distance for the in-situ immobilization of heavy metals in soils.

Ecotoxicological Assessment of Polluted Soils One Year after the Application of Different Soil Remediation Techniques

The present work evaluated the influence of eight different soil remediation techniques, based on the use of residual materials (gypsum, marble, vermicompost) on the reduction in metal(loid)s toxicity (Cu, Zn, As, Pb and Cd) in a polluted natural area. Selected remediation treatments were applied in a field exposed to real conditions and they were evaluated one year after the application. More specifically, five ecotoxicological tests were carried out using different organisms on either the solid or the aqueous (leachate) fraction of the amended soils. Likewise, the main soil properties and the total, water-soluble and bioavailable metal fractions were determined to evaluate their influence on soil toxicity. According to the toxicity bioassays performed, the response of organisms to the treatments differed depending on whether the solid or the aqueous fraction was used. Our results highlighted that the use of a single bioassay may not be sufficient as an indicator of toxicity pathways to select soil remediation methods, so that the joint determination of metal availability and ecotoxicological response will be determinant for the correct establishment of any remediation technique carried out under natural conditions. Our results indicated that, of the different treatments used, the best technique for the remediation of metal(loid)s toxicity was the addition of marble sludge with vermicompost.

Activation methods increase biochar's potential for heavy-metal adsorption and environmental remediation: A global meta-analysis

Removal of heavy metals (HMs) by adsorption on biochar's surface has shown promising results in the remediation of contaminated soil and water. The adsorption capacity of biochar can be altered by pre- or post-pyrolysis activation; however, the effect of activation methods on biochar's adsorption capacity varies widely. Here, we conducted a meta-analysis to identify the most effective methods for activation to enhance HM removal by biochar using 321 paired observations from 50 published articles. Activation of biochar significantly improves the adsorption capacity and removal efficiency of HMs by 136 and 80 %, respectively. This study also attempts to find suitable feedstocks, pyrolysis conditions, and physicochemical properties of biochar for maximizing the effect of activation of biochar for HMs adsorption. Activation of agricultural wastes and under pyrolysis temperatures of 350-550 °C produces biochars that are the most effective for HM adsorption. Activation of biochars with a moderate particle size (0.25-0.80 mm), low N/C (<0.01) and H/C ratios (<0.03), and high surface area (> 100 m² g^-1) and pore volume (> 0.1 cm³ g^-1) are the most desirable characteristics for enhancing HM adsorption. We conclude that pre-pyrolysis activation with metal salts/oxides was the most effective method of enhancing biochar's potential for adsorption and removal of a wide range of HMs. The results obtained from this study can be helpful in choosing appropriate methods of activations and the suitable choice of feedstocks and pyrolysis conditions. This will maximize HM adsorption on biochar surfaces, ultimately benefiting the remediation of contaminated environments.

Metal-Organic Framework-Based Materials for Wastewater Treatment: Superior Adsorbent Materials for the Removal of Hazardous Pollutants

In previous years, different pollutants, for example, organic dyes, antibiotics, heavy metals, pharmaceuticals, and agricultural pollutants, have been of note to the water enterprise due to their insufficient reduction during standard water and wastewater processing methods. MOFs have been found to have potential toward wastewater management. This Review focused on the synthesis process (such as traditional, electrochemical, microwave, sonochemical, mechanochemical, and continuous-flow spray-drying method) of MOF materials. Moreover, the properties of the MOF materials have been discussed in detail. Further, MOF materials' applications for wastewater treatment (such as the removal of antibiotics, organic dyes, heavy metal ions, and agricultural waste) have been discussed. Additionally, we have compared the performances of some typical MOFs-based materials with those of other commonly used materials. Finally, the study's current challenges, future prospects, and outlook have been highlighted.

Statistical and spatial analysis for soil heavy metals over the Murray-Darling river basin in Australia

Heavy metals (HMs) are a vital elements for investigating the pollutant level of sediments and water bodies. The Murray-Darling river basin area located in Australia is experiencing severe damage to increased crop productivity, loss of soil fertility, and pollution levels within the vicinity of the river system. This basin is the most effective primary production area in Australia where agricultural productivity is increased the gross domastic product in the entire mainland. In this study, HMs contaminations are examined for eight study sites selected for the Murray-Darling river basin where the inverse Distance Weighting interpolation method is used to identify the distribution of HMs. To pursue this, four different pollution indices namely the Geo-accumulation index (I_geo), Contamination factor (CF), Pollution load index (PLI), single-factor pollution index (SPLI), and the heavy metal pollution index (HPI) are computed. Following this, the Pearson correlation matrix is used to identify the relationships among the two HM parameters. The results indicate that the conductivity and N (%) are relatively high in respect to using I_geo and PLI indexes for study sites 4, 6, and 7 with 2.93, 3.20, and 1.38, respectively. The average HPI is 216.9071 that also indicates higher level pollution in the Murray-Darling river basin and the highest HPI value is noted in sample site 1 (353.5817). The study also shows that the levels of Co, P, Conductivity, Al, and Mn are mostly affected by HMs and that these indices indicate the maximum HM pollution level in the Murray-Darling river basin. Finally, the results show that the high HM contamination level appears to influence human health and local environmental conditions.

Diversity and activity of soil biota at a post-mining site highly contaminated with Zn and Cd are enhanced by metallicolous compared to non-metallicolous Arabidopsis halleri ecotypes

Hyperaccumulators' ability to take up large quantities of harmful heavy metals from contaminated soils and store them in their foliage makes them promising organisms for bioremediation. Here we demonstrate that some ecotypes of the zinc hyperaccumulator Arabidopsis halleri are more suitable for bioremediation than others, because of their distinct influence on soil biota. In a field experiment, populations originating from metal-polluted and unpolluted soils were transplanted to a highly contaminated metalliferous site in Southern Poland. Effects of plant ecotypes on soil biota were assessed by measurements of feeding activity of soil fauna (bait-lamina test) and catabolic activity and functional diversity of soil bacteria underneath A. halleri plants (Biolog® ECO plates). Chemical soil properties, plant morphological parameters, and zinc concentration in shoots and roots were additionally evaluated. Higher soil fauna feeding activity and higher bacterial community functional diversity were found in soils affected by A. halleri plants originating from metallicolous compared to non-metallicolous ecotypes. Differences in community-level physiological profiles further evidenced changes in microbial communities in response to plant ecotype. These soil characteristics were positively correlated with plant size. No differences in zinc content in shoots and roots, zinc translocation ratio, and plant morphology were observed between metallicolous and non-metallicolous plants. Our results indicate strong associations between A. halleri ecotype and soil microbial community properties. In particular, the improvement of soil biological properties by metallicolous accessions should be further explored to optimize hyperaccumulator-based bioremediation technologies.

Sustainable and reagent-free cathodic precipitation for high-efficiency removal of heavy metals from soil leachate

Heavy metal pollution of soils has become a serious environmental problem. Soil washing with degradable reagents is an effective remediation technique of heavy metal pollution, and the generated leachate must be appropriately treated before discharge. However, the existing methods usually have the problems of large consumption of regents, high cost, and secondary pollution. This study proposed a reagent-free electrochemical precipitation method to remove mixed heavy metal ions extracted from soils by citrate using inert electrodes (IrO₂-Ta₂O₅/Ti anode and graphite cathode). The results showed that the low potential of cathode led to the electrodeposition of Cd; the local alkaline environment provided by electro-mediated water reduction caused the hydrolytic precipitation of Zn and Pb; and the precipitation of Fe washed out from Fe-rich soil resulted in the coprecipitation of As on cathode surface. These combined cathodic precipitation processes decreased the concentrations of toxic heavy metals by over 99.4% after 12 h of electrolysis at 26 mA cm^-2. The electrodes exhibited high stability after multiple successive cycles of reuse. The concentrations of As, Zn, Pb and Cd in the leachate decreased to below the limits of industrial wastewater discharge in each cycle, and those in soils could be reduced by 53.8%, 58.8%, 25.5%, and 70.2% at the initial concentrations of 1549, 1016, 310 and 50 mg kg^-1, respectively. The heavy metal removal rate increased with increasing current density in the range of 0-52 mA cm^-2. This work provides an efficient and sustainable method for the remediation of site soils polluted by mixed heavy metals.

Simultaneous treatment of chromium-containing wastewater and electricity generation using a plant cathode-sediment microbial fuel cell: investigation of associated mechanism and influencing factors

A novel plant cathode-sediment microbial fuel cell (P-SMFC) was constructed to treat Cr-containing wastewater, and the effects of the plants used, initial concentrations of Cr(VI) employed, and the external resistance on the treatment of wastewater and generation of electricity were investigated. The results showed that the system achieved the best performance when Acorus calamus was the cathode plant, the external resistance was 2000 Ω, and the initial Cr (VI) concentration of the overlying water of is 230 mg/L. A maximum power density of 40.16 mW/m² was reached, and Cr (VI) and COD removal efficiencies in the overlying water were 99.94% and 98.21%, respectively. The closed-circuit installation promoted the attachment of many microorganisms to the cathode, anode and sediment, increased species abundance, and reduced species diversity. The P-SMFC is inexpensive to construct, it consumes no energy, and it can generate bioelectricity; it thus has great application development value as a chromium-containing wastewater treatment method.

Effect of salinity on the potential cadmium phytoremediation from the polluted soil by carpobrotus rossii

Nowadays, toxic metals accumulation in soil texture due to anthropogenic activities is a major form of pollution, which can lead to worldwide concerns; however, there are many treatment methods to remove them from soil such as phytoremediation. The carpobrotus rossii, has shown great potential to tolerate high salinity and accumulate Cd from contaminated soils. The experiments, in this study, are analyzed and optimized by Central Composite Design (CCD) as method and using Response Surface Methodology (RSM) package in R software. The Cd removal by root and the whole plant followed the quadratic model and the R² values were 94.95 and 94.81, respectively. The results showed that a decrease in NaCl concentration in Cd-containing solution can increase the phytoremediation process of Cd by carpobrotus rossii, significantly. The optimum conditions for 58% Cd removal by the whole plant, predicted through a CCD response surface methodology model were as follows: initial Cd concentration of 49 mgKg^-1,NaCl concentration of 16 dSm^-1, time of 17 days, and pH of 6.5. C. rossii's potential in removing 58% of Cd under the obtained optimum condition from the modelling was evaluated in real condition in the laboratory. The results revealed that around 56% of the initial added Cd concentration was removed by carpobrotus rossii. As a take home message, carpobrotus rossii can be recommended as an efficient plant to remove heavy metals especially cadmium from soil and sediments in arid area which have a salty soil.

Polyaspartic acid assisted-phytoremediation of cadmium-contaminated farmland: Phytoextraction efficiency, soil quality, and rhizosphere microbial community

Cadmium is highly toxic and one of the most dangerous metal pollutants in soil, and poses a serious threat to human health through soil-crop-food chain transmission. Polyaspartic acid (PASP) is a biodegradable additive that is environment-friendly compared to traditional chelating agents. Current studies have explored its effect on auxiliary phytoextraction at a laboratory scale; however, the method is still rarely reported at the field scale. Therefore, this study used two ecotypes of Pennisetum sinese in a field experiment for 3 years in Jiaoxi Township, Liuyang City, Hunan Province, China, to understand the effect of PASP on the phytoremediation of Cd-contaminated soil and soil quality through long-term field studies. Moreover, because the soil microbial community responds well to the phytoremediation effect of heavy metal (including Cd)-contaminated soil, the changes in rhizosphere soil microbial community diversity and composition were analyzed. After 2 years of PASP-enhanced phytoremediation, the PASP application increased the total Cd reduction in soil by 237 % and 255 %, and the soil DTPA-extractable Cd content decreased to 0.092 and 0.087 mg kg^-1. When the application of PASP ceased in the third year, the two ecotypes of P. sinese obtained after harvest could achieve feed safety. Our study showed that the application of PASP could significantly increase the Cd extraction capacity and shoot biomass of P. sinese, and maintain soil health by optimizing the composition and structure of rhizosphere bacterial communities. The rhizosphere bacterial community structure was improved and dominated by Acidobacteriota, Proteobacteria, and Chloroflexi at the phylum level, and the increased abundance of Acetobacter, Enterobacter, Pseudomonas, and Stenotrophomonas at the genus level may promote heavy metal detoxification in soil, plant growth, and phytoremediation. Long-term field monitoring demonstrated that the low-cost and eco-friendly features of PASP made it a good candidate for enhancing phytoextraction efficiency and regulating soil microbial communities for remediation.

Microbial communities in tree root-compartment niches under Cd and Zn pollution: Structure, assembly process and co-occurrence relationship

Woody plants have showed great potential in remediating severely contaminated soils by heavy metals (HMs) due to their cost-efficient and ecologically friendly trait. It is believed the root-associated microbiota plays a vital role in phytoremediation for HMs. However, the ecological process controlling the assembly and composition of tree root-associated microbial communities under HMs stress remains poorly understood. Herein, we profiled the bulk soil, rhizosphere and endosphere microbial communities of trees growing in heavily Cd and Zn polluted soil. The microbiota was gradually filtered from bulk soil to the tree roots and was selectively enriched in roots with specific taxa, such as Proteobacteria and Ascomycota. The microbial community assembly along the soil-root continuum was mainly controlled by deterministic processes from bulk soil to the endosphere, with the normalized stochasticity ratio (NST) indices of 67.16-31.05 % and 30.37-15.02 % for bacteria and fungi, respectively. Plant selection pressure sequentially increased from bulk soil to rhizosphere to endosphere, with the reduced bacterial alpha diversity accompanying the consequently reduced complexity of the co-occurrence network. Together, the findings provide new evidence for horizontal transmission of endophytic microbiome from soil to the host, which can shed light on the future screening and application of microbial-assisted phytoremediation.

Assessment of tea saponin and citric acid-assisted phytoextraction of Pb-contaminated soil by Salvia virgata Jacq

The present study, investigated the influence of the natural tea saponin (TS) obtained by microwave-assisted extraction and citric acid (CA) by commercially enhancing lead ion (Pb(II)) uptake by Salvia virgata Jacq. The Pb(II) tolerance was compared, and the growth of plants and Pb(II) accumulation characteristics of S. virgata with chemical agents TS and CA were studied for their phytoextraction potential of Pb(II) from artificially contaminated soil of 0-100 mg kg^-1 different concentrations under pot conditions. The different morphophysiological parameters of S. virgata such as growth, biomass, chlorophylls, and carotenoids were significantly changed under different Pb(II) stress and TS and CA concentrations. To evaluate the removal efficiency of the studied plant, the bioconcentration factor (BCF) or enrichment coefficient (EC), translocation factor (TF), and tolerance index (TI) values were also calculated and compared with the control. Phytotoxic effects were observed at 100 mg kg^-1; added Pb(II) treatments caused significant decreases of 33.05% in the biomass of S. virgata compared to the control. All the obtained results showed that the concentrations of Pb(II) being compared revealed a highest uptake (286 ± 5.2 mg kg^-1) of 100 mg kg^-1. The concentration of available Pb(II)-assisted TS and CA increased by 9.1-28.4% compared to the control. Based on these findings, S. virgata might be cultivated and used as a hyperaccumulator in the removal of Pb(II) from the contaminated soils, and appropriate application of TS and CA can enhance phytoremediation of Pb(II)-contaminated soil by other hyperaccumulator plants.

Investigating the use of synthetic humic-like acid as a soil amendment for metal-contaminated soil

Humic acid can effectively bind several metals and is regarded as a promising soil amendment. In this study, a novel synthetic humic-like acid (SHLA) was applied as a soil amendment to immobilize metals (Cu, Zn, Ni, As) in a contaminated agricultural soil (pH 6.17 ± 0.11; total organic carbon 5.91 ± 0.40%; Cu 302.86 ± 3.97 mg/kg; Zn 700.45 ± 14.30 mg/kg; Ni 140.16 ± 1.59 mg/kg). With increasing additions of SHLA from 0 to 10% (w/w), the soil pH constantly decreased from 6.17 ± 0.11 to 4.91 ± 0.10 (p < 0.001), while both total organic carbon (from 6.10 ± 0.12% to 10.55 ± 0.18%) and water-soluble carbon content (from 171.01 ± 10.15 mg/kg to 319.18 ± 20.74 mg/kg) of soil significantly increased (p < 0.001). Based on the results of 0.01 M CaCl2-extractable concentration of different metals, SHLA could lower the bioavailability of Cu (from 1.26 ± 0.04 mg/kg to 0.55 ± 0.05 mg/kg), Zn (from 6.74 ± 0.12 mg/kg to 3.26 ± 0.23 mg/kg), and Ni (from 5.16 ± 0.07 mg/kg to 0.12 ± 0.02 mg/kg), but increase the bioavailability of As (from 0.31 ± 0.02 to 1.83 ± 0.09 mg/kg). The immobilization mechanisms of metals in soils amended with SHLA involved surface complexation, electrostatic attraction, and cation-π interaction. Overall, SHLA shows great potential as a soil amendment for cationic heavy metal immobilization.

Ecological toxicity of Cd, Pb, Zn, Hg and regulation mechanism in Solanum nigrum L

This study aimed to investigate the combined ecotoxicological effects of Cd, Pb, Zn, Hg and regulation mechanisms in Solanum nigrum L. In this work, the co-exposure of these four heavy metals hindered the transformation of Cd, Zn, and Hg (except Pb) from available to non-available chemical forms. Individual Cd, Pb, Zn and Hg induced the oxidative damages to S. nigrum L., while their combination further enhanced this ecological toxicity. By internal regulation, the ecological toxicity of metals to S. nigrum L. could be alleviated to a certain extent. Specifically, S. nigrum L. was a hyperaccumulator of Cd with BCF ＞1. Moreover, since BCFroot of Pb, Zn and Hg were all greater than BCFshoot, S. nigrum L. could accumulate Pb, Hg and Zn mainly in plant roots, which was beneficial for the detoxification of plants. Meanwhile, the immobilization by cell wall (the proportions of Cd, Pb, Zn and Hg in the cell wall were 54.46-84.92%, 38.33-49.25%, 48.38-56.19% and 45.97-63.47% in low metal concentration treatments) and the sequestration in vacuole (the proportions of Cd, Pb, Zn, and Hg in the soluble fractions are 50.99-59.00%, 41.05-45.46%, 37.54-61.04% and 33.47-61.35% in high metal concentration treatments) also act as important detoxification pathways. The external regulation was mainly the changes of soil microbial communities influenced by plants. Specifically, the richness and diversity of bacteria in rhizosphere soil were increased, and roots of S. nigrum L. recruited some potentially beneficial microbials. This study provided a theoretical basis and guidance for S. nigrum L. as a phytoremediation plant under combined heavy metal pollution.

Insights into the heavy metal adsorption and immobilization mechanisms of CaFe-layered double hydroxide corn straw biochar: Synthesis and application in a combined heavy metal-contaminated environment

Biochar is an emerging eco-friendly and high-efficiency heavy metal (HM) adsorbent that exhibits satisfactory HM remediation effects in both water and soil environments. However, few studies have investigated the mechanisms and application of biochar in the remediation of combined HM-contaminated environments. Therefore, in the present study, a novel corn straw biochar-loaded calcium-iron layered double hydroxide composite (CaFe-LDH@CSB) was synthesized via the coprecipitation method and applied as a remediation adsorbent to remove HMs in both water and soil environments. The results indicated that the HM adsorption mechanism of CaFe-LDH@CSB in the aquatic phase involved a chemical endothermic adsorption process of functional group-complexed monolayers, dominated by precipitation, ion exchange, complexation and π bond interactions. The maximum adsorption capacity for Cd(II), Pb(II), Zn(II) and Cu(II) in the aqueous phase reached 24.58, 240.96, 57.57 and 39.35 mg g^-1, respectively. In addition, application of CaFe-LDH@CSB in the combined HM-contaminated soil treatment helped to increase the soil pH, which increased by 5.1-17.9% in low-contamination (LC) soil and by 7.0-13.9% in high-contamination (HC) soil. Moreover, application of CaFe-LDH@CSB effectively decreased the acid-soluble fraction of HMs and increased the HM residual fraction. The immobilization mechanism of CaFe-LDH@CSB in the soil was concluded to involve pore filling, functional group action and electrostatic interactions. Overall, this study provided a novel LDH biochar composite that can be effectively applied in the remediation of combined HM-contaminated water and soil environments.

Analysis of Cadmium Retention Mechanisms by a Smectite Clay in the Presence of Carbonates

Cadmium (Cd) is a toxic heavy metal with very low permissible exposure limits and is, thus, a very dangerous pollutant for the environment and public health and is considered by the World Health Organisation as one of the ten chemicals of major public concern. Adsorption onto solid phases and (co)precipitation processes are the most powerful mechanisms to retain pollutants and limit their migration; thus, the understanding of these processes is fundamental for assessing the risks of their presence in the environment. In this study, the immobilisation of Cd by smectite clay has been investigated by batch sorption tests, and the experimental data were interpreted with a thermodynamic model, including cation exchange and surface complexation processes. The model can describe the adsorption of Cd in smectite under a wide range of experimental conditions (pH, ionic strength, and Cd concentration). Under the conditions analysed in this study, the precipitation of otavite (CdCO₃) is shown to have a limited contribution to Cd immobilisation.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.

Impacts of wet-dry alternations on cadmium and zinc immobilisation in soil remediated with iron oxides

Chemical immobilisation is extensively used for in-situ remediation of heavy metals contaminated soil. Immobilised heavy metals could be reactivated by multiple factors such as pH, moisture, temperature, rainfall, etc., among which rainfall is very important, especially acid rain in southern China. Wet-dry alternations were used to simulate the leaching of metals by rainwater. The variation of cadmium (Cd) and zinc (Zn) speciation distribution in soil immobilised with iron oxides (goethite (GE) and 2-line ferrihydrite (GLS)) was investigated. The impacts of wet-dry alternations on the properties of the soil and amendments were also assessed. In the soil without amendments (OS) and amended with GE (GS), the stable fractions were reactivated and transformed into labile fractions under wet-dry alternations. In the soil amended with GLS (LS), the exchangeable and carbonate-bound Cd decreased while the soluble, Fe-Mn oxide bound and organic bound Cd increased. The carbonate-bound Zn was transformed into the Fe-Mn oxide-bound Zn. Transformation from the amorphous iron oxide into crystalline iron oxide in GS and LS were 4.9% and 5.3%. The Pearson correlation analysis showed that the soil pH and the iron-oxide speciation were strongly correlated with Cd/Zn fractions in the soil. The specific surface area, pore volume and adsorption capacity of the iron oxides decreased by 9.26%, 38.89% and 62-73% (for GE), 1.88%, 22.22% and 26-55% (for GLS). The altered soil properties and morphological differences between the two iron oxides under wet-dry alternations were important reasons for Cd/Zn reactivation.

Bioremediation potential of cadmium by recombinant Escherichia coli surface expressing metallothionein MTT5 from Tetrahymenathermophila

Cadmium (Cd) is a common heavy metal contaminant in industrial wastewater that causes many diseases in humans. Metallothionein (MT), a cysteine-rich metal-binding protein, is well known in chelate-heavy metals. In this study, we expressed MTT5 of Tetrahymena thermophila fused with Lpp-OmpA in the outer membrane of Escherichia coli to determine its ability to accumulate and adsorb Cd. Our results revealed that our recombinant E. coli had a 4.9-fold greater Cd adsorption compared to wild E. coli. Adsorption isothermic analysis demonstrated that the adsorption behavior for Cd in our recombinant bacteria was better fitted into the Freundlich isotherm model than Langmuir isotherm model. Fourier-transform infrared spectroscopy indicated that phosphate and organic phosphate groups were involved in the interaction between Cd and the bacterial surface. Using quantitative reverse transcription polymerase chain reaction, we further showed that the expression of metal-resistance genes (dnaK and clpB) was downregulated due to surface MTT5 protected our recombinant bacteria from Cd²⁺ adsorption. Furthermore, we showed that our recombinant bacteria could adsorb Cd from the contaminated wastewater containing other metals and were suggested to be applied in the field study.

24-epibrassinolide improves cadmium tolerance and lateral root growth associated with regulating endogenous auxin and ethylene in Kentucky bluegrass

The application of phytohormones is a viable technique to increase the efficiency of phytoremediation in heavy metal-contaminated soils. The objective of this study was to determine how the application of 24-epibrassinolide (EBR), a brassinosteroid analog, could regulate root growth and tolerance to cadmium (Cd) stress in Kentucky bluegrass. As a result, the number of lateral root primordia and total root length in the Cd-treated seedlings decreased by 33.1 % and 56.5 %, respectively. After the application of EBR, Cd accumulation in roots and leaves, and the negative effect of Cd on root growth were reduced under Cd stress. Additionally, the expression of the brassinosteroid signaling gene PpBRI1 was significantly upregulated by exogenous EBR. Moreover, exogenous EBR upregulated the expression of genes encoding antioxidant enzymes and improved the activity of antioxidant enzymes, thereby reduced oxidative stress in roots. Finally, targeted hormonomics analysis highlighted the utility of the application of EBR to alleviate the effect of Cd on the reduction in auxin (IAA) content and the increase in ethylene (ACC) content. These were known to be associated with the upregulation in the expression of auxin biosynthesis gene PpYUCCA1 and downregulation in the expression of ethylene biosynthesis gene PpACO1 in the roots treated with Cd stress. Overall, the application of EBR alleviated Cd-induced oxidative stress in addition to improving root elongation and lateral root growth crosstalk with auxin and ethylene in Kentucky bluegrass subjected to Cd stress. This study further highlights the potential role of brassinosteroids in improving the efficiency of phytoremediation for Cd-contaminated soils.

Removal of dyes, oils, alcohols, heavy metals and microplastics from water with superhydrophobic materials

A wide variety of pollutants can be currently found in water that are extremely difficult to remove due to their chemical composition and properties. A lot of effort has been made to tackle this issue that directly affects the environment. In this scenario, superhydrophobic surfaces, which have a water contact angle >150°, have emerged as an innovative technology that could be applied in different ways. Their environmental applications show promise in removing emerging pollutants from water. While the number of publications on superhydrophobic materials has remained largely unchanged since 2019, the number of articles on the environmental applications of superhydrophobic surfaces is still rising, corroborating the interest in this area. Herein, we briefly present the basis of superhydrophobicity and show the different materials that have been used to remove pollutants from water. We have identified five types of emerging pollutants that are efficiently removed by superhydrophobic materials: oils, microplastics, dyes, heavy metals, and ethanol. Finally, the future challenges of these applications are also discussed, considering the state of the art of the environmental applications of superhydrophobic materials.

Biogeochemical behavior and pollution control of arsenic in mining areas: A review

Arsenic (As) is one of the most toxic metalloids that possess many forms. As is constantly migrating from abandoned mining area to the surrounding environment in both oxidation and reducing conditions, threatening human health and ecological safety. The biogeochemical reaction of As included oxidation, reduction, methylation, and demethylation, which is closely associated with microbial metabolisms. The study of the geochemical behavior of arsenic in mining areas and the microbial remediation of arsenic pollution have great potential and are hot spots for the prevention and remediation of arsenic pollution. In this study, we review the distribution and migration of arsenic in the mining area, focus on the geochemical cycle of arsenic under the action of microorganisms, and summarize the factors influencing the biogeochemical cycle of arsenic, and strategies for arsenic pollution in mining areas are also discussed. Finally, the problems of the risk control strategies and the future development direction are prospected.

Moringa oleifera smoke induced positive changes in biochemical, metabolic, and antioxidant profile of rice seedling under cadmium stress

Cadmium as a heavy metal contaminates the agricultural soil and effect plant growth due to rapid increases in industrialization and anthropogenic activities. Smoke water of Moringa oleifera was used in the current study to alleviate the effect of cadmium on the physiological, biochemical, metabolic, and antioxidant profile of Basmati 385 and Shaheen Basmati seedling. Cadmium stress of 100, 200, and 400 µM were given to 28 days-old seedlings along with smoke water (1:1,000) for one week in hydroponic culture. As a result, Cd⁺² toxicity negatively affects the seedling length, fresh and dry weight, photosynthetic pigment, and electrolytes leakage, while the application of smoke water alleviated those effects. Furthermore, Cd⁺² content, cell injury, metabolic parameters (proline, total soluble sugar), and antioxidants (peroxidase, catalase) were increased with increasing Cd⁺² concentration while smoke water-treated seedlings showed reduction at high concentration. From present study, it can be concluded that smoke water had some regulatory compound which could reduce the Cd⁺² stress level in rice seedlings and improve plant growth.