Insights into the Electron-Transfer Regime of Peroxydisulfate Activation on Carbon Nanotubes: The Role of Oxygen Functional Groups

Catalytic Pollutant Upgrading to Dual-Asymmetric MnO2 @polymer Nanotubes as Self-Propelled and Controlled Micromotors for H2 O2 Decomposition

Industrial and disinfection wastewater typically contains high levels of organic pollutants and residue hydrogen peroxide, which have caused environmental concerns. In this work, dual-asymmetric MnO2 @polymer microreactors are synthesized via pollutant polymerization for self-driven and controlled H2 O2 decomposition. A hollow and asymmetric MnO2 nanotube is derived from MnO2 nanorods by selective acid etching and then coated by a polymeric layer from an aqueous phenolic pollutant via catalytic peroxymonosulfate (PMS)-induced polymerization. The evolution of particle-like polymers is controlled by solution pH, molar ratios of PMS/phenol, and reaction duration. The polymer-covered MnO2 tubing-structured micromotors presented a controlled motion velocity, due to the reverse torque driven by the O2 bubbles from H2 O2 decomposition in the inner tunnels. In addition, the partially coated polymeric layer can regulate the exposure and population of Mn active sites to control the H2 O2 decomposition rate, thus avoiding violent motions and massive heat caused by vigorous H2 O2 decomposition. The microreactors can maintain the function of mobility in an ultra-low H2 O2 environment (<0.31 wt.%). This work provides a new strategy for the transformation of micropollutants to functional polymer-based microreactors for safe and controlled hydrogen peroxide decomposition for environmental remediation.

Activation of peroxymonosulfate by Fe-Mn-modified MWCNTs for selective decontamination: Formation of high-valent metal-oxo species and superoxide anion radicals

The extensive presence of organic micropollutants in complex water matrices requires the development of selective oxidation technologies. In this study, a novel selective oxidation process was developed via the conjunction of FeMn/CNTs with peroxymonosulfate and successfully used to remove micropollutants such as sulfamethoxazole (SMX) and bisphenol A from aqueous solutions. FeMn/CNTs were prepared using a facile co-precipitation method, characterized using a series of surface characterization techniques, and then tested for pollutant removal. The results showed that the FeMn/CNTs had much greater reactivity than CNTs, manganese oxide, and iron oxide. The pseudo-first-order rate constant with FeMn/CNTs was more than 2.9-5.7 times that of the other tested materials. The FeMn/CNTs had great reactivity in a wide range of pH values from 3.0 to 9.0, with the best reactivity found at pH values of 5.0 and 7.0. High-valent metal-oxo species such as Fe(IV)O and Mn(IV)O and superoxide anion radicals were determined to be the reactive species and were responsible for the oxidation of SMX. These reactive species were selective; therefore, the overall removal performance of SMX was not obviously influenced by high levels of water components including chloride ions, bicarbonates, and natural organic matters. The results from this study may promote the design and application of selective oxidation technologies for micropollutant abatement.

Unexpectedly Enhanced Organics Removal in Persulfate Oxidation with High Concentration of Sulfate: The Origin and the Selectivity

Massive anions in high saline wastewater are primary factors that restricted the efficiency of pollutant degradation in advanced oxidation processes (AOPs). Herein, we reported the influence laws of different anions at high concentration on the electron-transfer process in the activation of persulfate, and especially, the sulfate anion exhibited the excellent promotion effect. Depending on the ionic charge, polarizability, and size, the anions exerted diverse effects on the dispersed phase and zeta potential of carbonaceous catalysts, which further embodied in the removal of pollutants. Based on the differences of reaction rate constant in water solution and high saline solution, the order was ClO4- < NO3- < Cl- < SO42- < CO32-, obeying the Hofmeister series. The enhancement of the sulfate anion was widely confirmed with different carbonaceous catalysts and pollutants with various structures. It could be attributed to the higher oxidation capacity, the faster interfacial electron transfer, and the better catalyst dispersion in the high sulfate environment. On the other hand, the decrease of zeta potential of the catalyst induced by sulfate reinforced the electrostatic attraction or repulsion with pollutants, which caused the selectivity of the sulfate promotion effect. Overall, this study provides new insights into the mechanism of influence of anions on AOPs, which refreshed the cognition of the role of sulfate on pollutant degradation, and helps guide the treatment design of high salinity wastewater.

Rapid PFOS mineralization with peroxydisulfate activation process mediated by N modified Fe-based catalyst

As the cheap and efficient catalysts, the iron-based catalysts have been considered as one of the most promising catalysts for peroxydisulfate (PDS) activation and the development of high-performance iron-based catalysts are attracting growing attentions. In this work, a magnetic Fe-based catalysts (Fe/NC-1000) was obtained by using Fe modified ZIF-8 as the precursor and used to activate the PDS for the degradation of perfluorooctane sulphonate (PFOS). Morphology and structure analysis showed that the resulted Fe/NC-1000 catalyst was displayed porous spheres (40-60 nm) and mainly composed of Fe0, FeNx and carbon. When Fe/NC-1000 was employed to activate the PDS (0.1 g/L of catalyst dosage, 0.5 g/L of PDS dosage and at initial pH of 4.6), the Fe/NC-1000/PDS system exhibited excellent efficiency (97.9 ± 0.1) % for PFOS (10 mg/L) degradation within 30 min. The quenching tests and EPR results revealed that the Fe/NC-1000/PDS system degraded PFOS primarily through singlet oxygen (1O2) evolution and electron-transfer process. Besides, based on the degradation byproducts determined by LC-MS-MS, the PFOS first occurred de-sulfonation to form PFOA, and then the resulted PFOA underwent stepwise defluorination in the Fe/NC-1000/PDS system. Density Functional Theory (DFT) calculations and electrochemistry tests strongly confirmed that Fe/NC-1000 exhibited high electron transfer efficiency, resulting in promoted performance on activating PDS. Importantly, the results of Ecological Structure-Activity Relationship (ECOSAR) analysis showed that the intermediates were lowly toxic during the PFOS degradation, manifesting a green process for PFOS removal. This study would provide more understandings for the persulfate activation process mediated by Fe-based catalysts for Perfluorinated alkyl substances (PFAS) elimination.

Insights into the carbon nanotubes-mediated activation of permanganate for decontamination under high salinity

Radical-based advanced oxidation process (AOPs) has attracted great interests in wastewater treatment field. However, by the traditional radical-based method, the degradation of organic pollution is greatly suppressed when radicals react with the co-existing anions in the solution. Herein, an efficient method for degrading of contaminant under high salinity conditions is discussed through a non-radical pathway. Carbon nanotubes (CNTs) was employed as an electron transfer medium to facilitate the electron conversion from contaminants to potassium permanganate (PM). Based the results of quenching experiments, probe experiments, and galvanic oxidation process experiments, the degradation mechanism of CNTs/PM process was demonstrated to be electron transfer, rather than reactive intermediate Mn species. As a result, typical influencing factors including salt concentration, cations, and humic acid have less of an impact on degradation during CNTs/PM processes. In addition, the CNTs/PM system exhibits superior reusability and universality of pollutants, which has the potential to be applied as a non-radical pathway for the purification of contaminant in the large-scale high salinity wastewater treatment.

Merits and Limitations of Radical vs. Nonradical Pathways in Persulfate-Based Advanced Oxidation Processes

Urbanization and industrialization have exerted significant adverse effects on water quality, resulting in a growing need for reliable and eco-friendly treatment technologies. Persulfate (PS)-based advanced oxidation processes (AOPs) are emerging as viable technologies to treat challenging industrial wastewaters or remediate groundwater impacted by hazardous wastes. While the generated reactive species can degrade a variety of priority organic contaminants through radical and nonradical pathways, there is a lack of systematic and in-depth comparison of these pathways for practical implementation in different treatment scenarios. Our comparative analysis of reaction rate constants for radical vs. nonradical species indicates that radical-based AOPs may achieve high removal efficiency of organic contaminants with relatively short contact time. Nonradical AOPs feature advantages with minimal water matrix interference for complex wastewater treatments. Nonradical species (e.g., singlet oxygen, high-valent metals, and surface activated PS) preferentially react with contaminants bearing electron-donating groups, allowing enhancement of degradation efficiency of known target contaminants. For byproduct formation, analytical limitations and computational chemistry applications are also considered. Finally, we propose a holistically estimated electrical energy per order of reaction (EE/O) parameter and show significantly higher energy requirements for the nonradical pathways. Overall, these critical comparisons help prioritize basic research on PS-based AOPs and inform the merits and limitations of system-specific applications.

Rapid self-heating synthesis of Fe-based nanomaterial catalyst for advanced oxidation

Iron-based catalysts are promising candidates for advanced oxidation process-based wastewater remediation. However, the preparation of these materials often involves complex and energy intensive syntheses. Further, due to the inherent limitations of the preparation conditions, it is challenging to realise the full potential of the catalyst. Herein, we develop an iron-based nanomaterial catalyst via soft carbon assisted flash joule heating (FJH). FJH involves rapid temperature increase, electric shock, and cooling, the process simultaneously transforms a low-grade iron mineral (FeS) and soft carbon into an electron rich nano Fe0/FeS heterostructure embedded in thin-bedded graphene. The process is energy efficient and consumes 34 times less energy than conventional pyrolysis. Density functional theory calculations indicate that the electron delocalization of the FJH-derived heterostructure improves its binding ability with peroxydisulfate via bidentate binuclear model, thereby enhancing ·OH yield for organics mineralization. The Fe-based nanomaterial catalyst exhibits strong catalytic performance over a wide pH range. Similar catalysts can be prepared using other commonly available iron precursors. Finally, we also present a strategy for continuous and automated production of the iron-based nanomaterial catalysts.

Insight into the electron transfer regime of periodate activation on MnO2: The critical role of surface Mn(IV)

At present, the potential mechanism of manganese oxide (MnO₂) activation of PI and the key active sites of PI activation are still unclear and controversial. To this end, three different crystal forms of MnO₂ were prepared in this study and used to activate PI to degrade pollutants. The results showed that different crystal types of MnO₂ showed different catalytic abilities, and the order was γ-MnO₂ > α-MnO₂ > β-MnO₂. Through quenching experiments, EPR tests, Raman experiments and in situ electrochemical experiments, it has been confirmed that electron transfer-mediated non-free radical process is the main mechanism of pollutant degradation, in which the active substance is the highly active metastable intermediate complex (MnO₂/PI*). Hydroxyl radical (HO^•), superoxide radical (O₂^•-), singlet oxygen (¹O₂) and iodine radical (IO₃^•) did not participate in pollutant degradation. The quantitative structure-activity relationship analysis confirmed that the catalytic performance of MnO₂ was highly positively correlated with the surface Mn(IV) content, which indicated that the surface Mn(IV) site was the main active site. Overall, this study will be of great help to the design and application of manganese dioxide activation for periodate degradation of pollutants.

Enhanced degradation of pharmaceuticals in wastewater by coupled radical and non-radical pathways: Further unravelling kinetics and mechanism

Advanced oxidation processes based on radicals and/or non-radical catalysis are emerging as promising technologies for eliminating pharmaceuticals (PhACs) from wastewater. However, the respective contributions of different removal pathways (radicals or non-radical) for PhAC degradation still lacks quantitative investigation. Zero-valent iron and carbon nanotubes are frequently used to generate both radicals and non-radical species via the activation of persulfate (Fe⁰/SWCNT/PDS). Herein, the removal kinetics of 1 μM PhACs are depicted, and the corresponding synergistic mechanism of the Fe⁰/SWCNT/PDS process is discussed. Coupled removal pathways showed the higher degradation of PhACs than the individual pathways. Radicals quenching studies combined with electron spin resonance characterisation suggested that the radical-based removal pathway tends to attack electron-deficient organics, whereas its counterpart is more likely to work on electron-rich organics. From the perspectives of the contribution rate, the redox cycles of conjugated Fe species play a more important role in the generation of radicals than free Fe species, and the faster electron transfer in the conductive bridge offered by SWCNT is responsible for the effective corrosion of Fe⁰ and the decomposition of PDS. Six real wastewater samples were used to prove the generality of the above removal contribution, regardless of the wastewater samples, and the results suggested that identical attack patterns were obtained in all real wastewater samples, although coexistence matrix slightly suppressed PhAC removal. This work provides a deeper insight into the high-performance working mechanism on synergistic interactions and contaminant removal in a combined catalysis system.

Enhancement of peroxymonosulfate activation by humic acid-modified sludge biochar: Role of singlet oxygen and electron transfer pathway

Sludge biochar (SBC) modified by humic acid (HA) was used to activate peroxymonosulfate (PMS) for degrading naproxen (NPX). HA-modified biochar (SBC-50HA) boosted the catalytic performance of SBC for PMS activation. The SBC-50HA/PMS system had good reusability and structural stability, and was unaffected by complex water bodies. The results of Fourier transform infrared (FTIR) and X-ray diffraction spectroscopy (XPS) indicated that graphitic carbon (CC), graphitic N, and C-O on SBC-50HA played a vital part on the removal of NPX. The key role of non-radical pathways such as singlet oxygen (¹O₂) and electron transfer in the SBC-50HA/PMS/NPX system was verified by inhibition experiments, electron paramagnetic resonance (EPR), electrochemistry, and PMS consumption. The possible degradation pathway of NPX was proposed by density functional theory (DFT) calculations, and the toxicity of NPX and its degradation intermediates were evaluated.

Efficient degradation of norfloxacin using a novel biochar-supported CuO/Fe3O4 combined with peroxydisulfate: Insights into enhanced contribution of nonradical pathway

Nonradical persulfate oxidation techniques have evolved as a new contaminated water treatment approach due to its great tolerance to water matrixes. The catalysts of CuO-based composites have received much attention in that aside from SO₄^•-/^•OH radicals, the nonradicals of singlet oxygen (¹O₂) can be also generated during persulfate activation via CuO. However, the issues regarding particles aggregation and metal leaching from the catalysts during the decontamination process remain to be addressed, which could have a remarkable impact on the catalytic degradation of organic pollutants. Accordingly in the present study, a novel biochar-supported bimetallic Fe₃O₄-CuO catalyst (CuFeBC) was facilely developed to activate peroxodisulfate (PDS) for the degradation of norfloxacin (NOR) in aqueous solution. The results showed CuFeBC has a superior stability against metal ions Cu/Fe leaching, and NOR (30 mg L^-1) was degraded at 94.5% within 180 min in the presence of CuFeBC (0.5 g L^-1) and PDS (6 mM) in pH 8.5. The scavenging of reactive oxygen species and electron spin resonance analysis revealed that ¹O₂ dominated the degradation of NOR. Compared with pristine CuO-Fe₃O₄, the interaction between biochar substrate and metal particles could significantly enhance the contribution of the nonradical pathway to NOR degradation from 49.6% to 84.7%. Biochar substrate could efficiently reduce the leaching of metal species from the catalyst, thereby maintaining excellent catalytic activity and lasting reusability of the catalyst. These findings could enlighten new insights into fine-tuning radical/nonradical processes from CuO-based catalysts for the efficient remediation of organic contaminants in polluted water.

Surface engineering of Al2O3 nanotubes by ureasolysis method for activating persulfate degradation of antibiotics

Though ecofriendly, pure Al₂O₃ has never been used for activation of peroxodisulfate (PDS) to degrade pollutants. We report the fabrication of Al₂O₃ nanotubes by ureasolysis method for efficient activating PDS degradation of antibiotics. The fast ureasolysis in aqueous AlCl₃ solution produces NH₄Al(OH)₂CO₃ nanotubes, which are calcined to porous Al₂O₃ nanotubes, and the release of ammonia and carbon dioxide engineers the surface features of large surface area, numerous acidic-basic sites and suitable Zeta potentials. The synergy of these features facilitates the adsorption of the typical antibiotics ciprofloxacin and PDS activation, which is proved by experiment results and density functional theory simulation. The proposed Al₂O₃ nanotubes can catalyze 92-96% degradation of 10 ppm ciprofloxacin within 40 min, with chemical oxygen demand removal of 65-66% in aqueous, and 40-47% in whole including aqueous and catalysts. Ciprofloxacin at high concentration, other fluoroquinolones and tetracycline can also be effectively degraded. These data demonstrate the Al₂O₃ nanotubes prepared by the nature-inspired ureasolysis method has unique features and great potentials for antibiotics degradation.

Peroxymonosulfate and peroxydisulfate activation by fish scales biochar for antibiotics removal: Synergism of N, P-codoped biochar

Social development is accompanied by technological progress, which commonly leads to the expansion of pollution As an essential resource of modern medical treatment, antibiotics have become a hot topic in the aspect of environmental pollution. In this study, we first used fish scales to synthesize N, P-codoped biochar catalyst (FS-BC) as peroxymonosulfate (PMS) and peroxydisulfate (PDS) activator to degrade tetracycline hydrochloride (TC). At the same time, peanut shell biochar (PS-BC) and coffee ground biochar (CG-BC) were prepared as reference materials. Among them, FS-BC exhibited the best catalytic performance due to the excellent defect structure (I_D/I_G = 1.225) and the synergism of N, P heteroatoms. PS-BC, FS-BC and CG-BC achieved degradation efficiencies of 86.26%, 99.71% and 84.41% for TC during PMS activation and 56.79%, 93.99% and 49.12% during PDS, respectively. In both FS-BC/PMS and FS-BC/PDS systems, non-free radical pathways involved singlet oxygen (¹O₂), surface-bound radicals mechanism and direct electron transfer mechanism. Structural defects, graphitic N and pyridinic N, P-C groups and positively charged sp² hybridized C adjacent to graphitic N were all critical active sites. FS-BC has the potential for practical applications and development because of its robust adaptation to pH and anions and stable re-usability. This study not only provides a reference for biochar selection, but also suggests a superior strategy for TC degradation in the environment.

Stability enhancing of perovskite LaCoO3 by compositing with oxygen doped MoS2 in Fenton-like reactions

Perovskite materials are reported to be effective in peroxymonosulfate (PMS) based Fenton-like reactions, the leaching rates of chalcogenide materials in perovskite materials are however serious, thus leading to bad performance in long-term stability. In this study, an O-doped MoS₂ is synthesized to composite with LaCoO₃, and the high catalytic activity of LaCoO₃ is well preserved with greatly decreased Co leaching. During the BPA degradation with PMS as oxidant, ∼100% degradation can be achieved in 20 min and this degradation efficiency can be maintained for ∼45 h in a simulated fixed bed reactor, which is almost 3 times longer than the pure LaCoO₃. With the compositing of O-doped MoS₂, the leached Co was greatly decreased and the dominated reactive oxidation species (ROS) transformed from SO₄^•- into O₂^•- with longer lifespan, thus resulting in the better stability. This study could promote the application of perovskite materials in the real industrial wastewater treatment.

High-performance photocatalytic peroxymonosulfate activation by carbon quantum dots via precise surface chemistry regulation: Insight into the structure-function relations

Carbon quantum dots (CQDs) are considered promising metal-free green catalysts for the activation of persulfates, but direct experimental evidence to identify the true active sites on the surface of CQDs is still lacking. We prepared CQDs with different oxygen contents by controlling the carbonisation temperature, using a simple pyrolysis method. Photocatalytic activity experiments show that CQDs₂₀₀ exhibits the best PMS activation performance. By investigating the relationship between the oxygen functional groups on CQDs surface and photocatalytic activity, it was postulated that the C=O groups might be the predominant active site, which was confirmed by selective chemical titrations of the C=O, C-OH and COOH groups. Furthermore, limited to the weak photocatalytic properties of the pristine CQDs, ammonia and phenylhydrazine were used to precisely nitrogen-modify the o-CQD surface. We found that phenylhydrazine-modified o-CQDs-PH promoted the absorption of visible light and the separation of photocarriers, thus enhancing the activation of PMS. Theoretical calculations provide more insights from different levels of the pollutant, fine-tuned CQDs, and their interactions.

Boosting peroxymonosulfate activation by iron-based dual active site for efficient sulfamethoxazole degradation: synergism of Fe and N-doped carbon

Persulfate activation is emerged as an alternative applied in environment remediation, but it is still a great challenge to develop highly active catalysts for efficient degradation of organic pollutants. Herein, a heterogeneous iron-based catalyst with dual-active sites was synthesized by embedding Fe nanoparticles (FeNPs) onto the nitrogen-doped carbon, which was used to activate peroxymonosulfate (PMS) for antibiotics decomposition. The systematic investigation indicated the optimal catalyst exhibited a significant and stable degradation efficiency of sulfamethoxazole (SMX), in which the SMX can be completely removed in 30 min even after 5 cycle tests. Such satisfactory performance was mainly attributed to the successful construction of electron-deficient C centers and electron-rich Fe centers via the short C-Fe bonds. These short C-Fe bonds accelerated electrons to shuttle from SMX molecules to electron-rich Fe centers with a low transmission resistance and short transmission distance, enabling Fe (III) to receive electrons to promote the regeneration of Fe (II) for durable and efficient PMS activation during SMX degradation. Meanwhile, the N-doped defects in the carbon also provided reactive bridges that accelerated the electron transfer between FeNPs and PMS, ensuring the synergistic effects toward Fe (II)/Fe (III) cycle to some extent. The quenching tests and electron paramagnetic resonance (EPR) indicated O₂^·- and ¹O₂ were the dominant active species during the SMX decomposition. As a result, this work provides an innovative method to construct a high-performance catalyst to active sulfate for organic contaminant degradation.

Peroxymonosulfate activated by natural porphyrin derivatives for rapid degradation of organic pollutants via singlet oxygen and high-valent iron-oxo species

The activation of peroxymonosulfate (PMS) by sodium ferric chlorophyllin (SFC), a natural porphyrin derivative extracted from chlorophyll-rich substances, was systematically investigated for facile degradation of bisphenol A (BPA). SFC/PMS is capable of degrading 97.5% of BPA in the first 10 min with the initial BPA concentration of 20 mg/L and pH = 3, whereas conventional Fe²⁺/PMS could only remove 22.6% of BPA under identical conditions. It demonstrates a prominent flexibility to a broad pH range of 3-11 with complete pollutant degradation. A remarkable tolerance toward concomitant high concentration of inorganic anions (100 mM) was also observed, among which (bi)carbonates can even accelerate the degradation. The nonradical oxidation species, including high-valent iron-oxo porphyrin species and ¹O₂, are identified as dominant species. Particularly, the generation and participation of ¹O₂ in the reaction is evidenced by experimental and theoretical methods, which is vastly different from the previous study. The specific activation mechanism is unveiled by density functional theory (DFT) calculations and ab initio molecular dynamics (AIMD) simulations. The results shed light on effective PMS activation by iron (III) porphyrin and the proposed natural porphyrin derivative would be a promising candidate for efficient abatement of recalcitrant pollutants toward complicated aqueous media in wastewater treatment.

Unveiling different antibiotic degradation mechanisms on dual reaction center catalysts with nitrogen vacancies via peroxymonosulfate activation

Metal-nitrogen-site catalysts are widely recognized as effective heterogeneous catalysts in peroxymonosulfate (PMS)-based advanced oxidation processes. However, the selective oxidation mechanism for organic pollutants is still contradictory. In this work, manganese-nitrogen active centers and tunable nitrogen vacancies were synchronously constructed on graphitic carbon nitride (LMCN) through l-cysteine-assisted thermal polymerization to reveal different antibiotic degradation mechanisms. Benefiting from the synergism of manganese-nitrogen bond and nitrogen vacancies, the LMCN catalyst exhibited excellent catalytic activity for the degradation of tetracycline (TC) and sulfamethoxazole (SMX) antibiotics with first-order kinetic rate constants of 0.136 min^-1 and 0.047 min^-1, which were higher than those of other catalysts. Electron transfer dominated TC degradation at low redox potentials, while electron transfer and high-valent manganese (Mn (V)) were responsible for SMX degradation at high redox potentials. Further experimental studies unveiled that the pivotal role of nitrogen vacancies is to promote electron transfer pathway and Mn(V) generation, while nitrogen-coordinated manganese as the primary catalytic active site determines Mn(V) generation. In addition, the antibiotic degradation pathways were proposed and the toxicity of byproducts was analyzed. This work provides an inspiring idea for the controlled generation of reactive oxygen species by targeted activation of PMS.

Neglected but Efficient Electron Utilization Driven by Biochar-Coactivated Phenols and Peroxydisulfate: Polyphenol Accumulation Rather than Mineralization

We report an unrecognized but efficient nonradical mechanism in biochar-activated peroxydisulfate (PDS) systems. Combining a newly developed fluorescence trapper of reactive oxygen species with steady-state concentration calculations, we showed that raising pyrolysis temperatures of biochar (BC) from 400 to 800 °C remarkably enhanced trichlorophenol degradation but inhibited the catalytic production of radicals (SO₄^•- and ^•OH) in water and soil, thereby switching a radical-based activation into an electron-transfer-dominated nonradical pathway (contribution increased from 12.9 to 76.9%). Distinct from previously reported PDS* complex-determined oxidation, in situ Raman and electrochemical results of this study demonstrated that the simultaneous activation of phenols and PDS on the biochar surface triggers the potential difference-driven electron transfer. The formed phenoxy radicals subsequently undergo coupling and polymerization reactions to generate dimeric and oligomeric intermediates, which are eventually accumulated on the biochar surface and removed. Such a unique nonmineralizing oxidation achieved an ultrahigh electron utilization efficiency (e_phenols/e_PDS) of 182%. Through biochar molecular modeling and theoretical calculations, we highlighted the critical role of graphitic domains rather than redox-active moieties in lowering band-gap energy to facilitate electron transfer. Our work provides insights into outstanding contradictions and controversies related to nonradical oxidation and inspiration for more oxidant-saving remediation technologies.

Utility and mechanism of magnetic nano-MnFe2O4/MWNT activation for oxidative degradation of tetracycline by persulfate

A magnetic MnFe₂O₄/MWNT nanocomposite activated with sodium persulfate (PDS) was investigated for the removal of the widely used antibiotic tetracycline (TC). The best-performing 80 wt.% MnFe₂O₄/MWNT nanocomposite was screened for catalytic degradation of TC by comparing the catalytic and adsorption processes. The nanocomposite was evaluated using a series of physical characterizations. The effects of catalyst dosage, PDS dosage, temperature, initial pH, and initial concentration of TC on TC removal were investigated. After the reaction for 90 min, the addition of 4 mM PDS to the 80 wt.% MnFe₂O₄/CNT catalyst at 0.5 g/L degraded 78.85% of TC and 51.97% of TOC at an initial TC concentration of 40 mg/L. The reusability of MnFe₂O₄/MWNT nanocomposite was evaluated and the structural stability of the material was verified. It was demonstrated that multiple active species (SO₄^-, ·OH, ·O₂^-, ¹O₂) were produced in the MnFe₂O₄/MWNT/PDS system. The catalytic mechanism was analyzed based on the XPS results. Total organic carbon (TOC) measurement indicated partial TC had completely mineralized. The presumable degradation pathway of TC was proposed according to intermediate products by the LC-MS method.

Degradation of PAHs in soil by activated persulfate system with activated carbon supported iron-based bimetal

We developed a material of activated carbon (AC)-supported highly active iron-based bimetal (iron-copper bimetal/AC, Fe-Cu/AC) with high efficiency for polycyclic aromatic hydrocarbons (PAHs) degradation in soil by activating persulfate, benefiting from the synergistic effect that the characteristics of AC with porous carbon backbone, multiple active functional groups, high loading capacity and the characteristics of FeCu bimetal with high activity. The addition of Cu to the Fe-based/AC activator not only improved the dispersibility of Fe particles but also maintained the stability of the metal in the Fe-Cu/AC. The thermal activation (50 °C) promoted the degradation of PAHs by the Fe-Cu/AC-activated S₂O₈^2- system. Of the various systems tested, the Fe-Cu/AC-activated S₂O₈^2- system had the best degradation efficiency for 19 PAHs, with the overall efficiency following the order of Fe-Cu/AC + S₂O₈^2- > Fe-Cu + S₂O₈^2- > Fe-Cu/AC > S₂O₈^2-. The degradation mechanism of the Fe-Cu/AC-activated S₂O₈^2- system on soil PAHs showed that OH, OOH, and SO₄^- were the main active groups involved in the degradation of target PAHs. The target pollutants and their degradation products in the Fe-Cu/AC-activated S₂O₈^2- system indicated specific exposure pathways, providing a theoretical basis for the remediation of PAH-contaminated soil.

Nanoconfinement-enhanced Fenton-like polymerization via hollow hetero-shell carbon for reducing carbon emissions in organic wastewater purification

Lower reaction speed and excessive oxidant inputs impede the removal of contaminants from water via the advanced oxidation processes based on peroxymonosulfate. Herein, we report a new confined catalysis paradigm via the hollow hetero-shell structured CN@C (H-CN@C), which permits effective decontamination through polymerization with faster reaction rates and lower oxidant dosage. The confined space structures regulated the CN and CO and electron density of the inner shell, which increased the electron transfer rate and mass transfer rate. As a result, CN in H-CN@C-10 reacted with peroxymonosulfate in preference to CO to generate singlet oxygen, improving the second-order reaction kinetics by 503 times. The identification of oxidation products implied that bisphenol AF could effectively remove by polymerization, which could reduce carbon dioxide emissions. These favorable properties make the nanoconfined catalytic polymerization of contaminants a remarkably promising nanocatalytic water purification technology.

Unveiling the roles of dissolved organic matters derived from different biochar in biochar/persulfate system: Mechanism and toxicity

Biochar has been frequently used as a persulfate (PS) activator due to its attractive properties, but dissolved organic matter (DOM) derived from the non‑carbonized part of biochar has received less attention, not to mention its specific role and impact in biochar/PS systems. In this study, wheat straw, municipal sludge, and swine bone were selected as the representative feed stocks of biochar. Subsequently, these three types of biochar were adopted to explore the roles of DOM in biochar/PS systems. Although the composition and amount of DOM derived from different biochar were discrepant, they exhibited similar effect in biochar/PS systems. To be specific, the pore-clogging effect of DOM on biochar suppressed the adsorption capacity and catalytic performance of the three biochar. Furthermore, the removal of DOM decreased the environmental risk of these biochar/PS systems and enhanced the stability of the involved biochar. With respect to the variation in degradation mechanism, the removal of DOM increased the proportion of electron transfer pathway in unison, but the diminution in the roles of O₂^•¯ and ¹O₂ was more remarkable in bone-derived-biochar/PS systems. Additionally, the toxicity test illustrated that the leakage and accumulation of DOM were toxic to Chlorella sp., and the DOM from sludge-derived-biochar presented the highest toxicity. Overall, this study analyzes the roles of DOM derived from different biochar in biochar/PS systems and evaluates their environmental risk, which contributes to a comprehensive understanding of the fate of DOM derived from biochar.

Highly-efficient peroxydisulfate activation by polyaniline-polypyrrole copolymers derived pyrolytic carbon for 2,4-dichlorophenol removal in water: Coupling mechanism of singlet oxygen and electron transfer

Carbonization of N-containing aromatic polymers is a promising route to prepare N-doped carbon materials with low cost, easy regulation, and no external N source. However, there are relatively few studies applying these materials for persulfate activation, and the catalytic mechanisms of the existing reaction systems are divergent. In this paper, a series of N-doped carbon materials were prepared by carbonizing polyaniline (PANI), polypyrrole (PPy), and PANI-PPy copolymers. The copolymer-derived carbon materials exhibit superior peroxydisulfate (PDS) catalytic activity compared to some commercially available and reported carbon materials. Combing quenching experiments, EPR analysis, chemical probe analysis, and various electrochemical analysis methods identified the singlet oxygen (¹O₂) and electron transfer as the main reaction pathways of all systems, but the contribution of each pathway was influenced by the types of precursors. The structure-activity relationship indicated that the carbonyl group (CO) was the main active site for the ¹O₂ pathway, while the electron transfer ability of the reaction system and the potential of the complex formed by catalyst and PDS jointly determined the electron transfer pathway. This paper provides a new strategy for obtaining excellent N-doped carbon-based persulfate activators and deepens the insight into the mechanism of PDS activation by N-doped carbon materials.

Significant roles of surface functional groups and Fe/Co redox reactions on peroxymonosulfate activation by hydrochar-supported cobalt ferrite for simultaneous degradation of monochlorobenzene and p-chloroaniline

CoFe₂O₄/hydrochar composites (FeCo@HC) were synthesized via a facile one-step hydrothermal method and utilized to activate peroxymonosulfate (PMS) for simultaneous degradation of monochlorobenzene (MCB) and p-chloroaniline (PCA). Additionally, the effects of humic acid, Cl^-, HCO₃^-, H₂PO₄^-, HPO₄^2- and water matrices were investigated and degradation pathways of MCB and PCA were proposed. The removal efficiencies of MCB and PCA were higher in FeCo@HC140-10/PMS system obtained under hydrothermal temperature of 140 °C than FeCo@HC180-10/PMS and FeCo@HC220-10/PMS systems obtained under higher temperatures. Radical species (i.e., SO₄^•-, •OH) and nonradical pathways (i.e., ¹O₂, Fe (IV)/Co (IV) and electron transfer through surface FeCo@HC140-10/PMS* complex) co-occurred in the FeCo@HC140-10/PMS system, while radical and nonradical pathways were dominant in degrading MCB and PCA respectively. The surface functional groups (i.e., C-OH and CO) and Fe/Co redox cycles played crucial roles in the PMS activation. MCB degradation was significantly inhibited in the mixed MCB/PCA solution over that in the single MCB solution, whereas PCA degradation was slightly promoted in the mixed MCB/PCA solution. These findings are significant for the provision of a low-cost and environmentally-benign synthesis of bimetal-hydrochar composites and more detailed understanding of the related mechanisms on PMS activation for simultaneous removal of the mixed contaminants in groundwater.

Rational regulation of peroxymonosulfate activation over porous Co3O4 with carbon coating to boost utilization efficiency of peroxymonosulfate and achieve rapid removal of pollutants

It is of great significance to regulate rationally the activation mechanism of persulfate for promoting the development of sulfate radical-based advanced oxidation processes in wastewater treatment. Herein, carbon coated porous Co₃O₄ with hollow structure was synthesized. Notably, the formation of porous hollow structure improved specific surface area of Co₃O₄ and offered more redox couples of Co²⁺/Co³⁺, thereby reducing electron transfer resistance. Thus, the generation of reactive oxygen species and the role of high-valent transition metal complexes (namely Co₃O₄Co⁴⁺) were improved. The formation of carbon layer on the Co₃O₄ surface can avoid the release of Co ion during reaction process. Benefiting from the role of carbon layer in electron transport, catalyst-mediated the direct electron transfer from pollutant to PMS was boosted. Radical and nonradical pathways worked in coordination each other and realized the rapid removal of various organic pollutants in the presence of a little PMS. In short, current work revealed that modulating rationally the microstructure of catalyst was an efficient strategy for achieving controllable regulation of PMS activation process. More significantly, whether the direct electron transfer process can occur or not depended on both catalyst structure and electronic density of pollutants.

Facilely achieved enhancement of Fenton-like reactions by constructing electric microfields

In this work, we found that the presence of non-active ZnO crystals greatly accelerated the degradation of Bisphenol A (BPA) by 3.7 folds in the peroxymonosulfate (PMS, HSO₅^-)/Co₃O₄ system. Our mechanistic study revealed that the ZnO particles would create negative electric microfields around them, which are closely related with the zeta potentials (ζ) of ZnO and affected by solution pH. According to COMSOL simulation, the electrostatic repulsion between ZnO and PMS would drive HSO₅^- toward active Co₃O₄ surface, leading to the concentration increasing of HSO₅^- around active Co₃O₄ particles, which will then improve the degradation performance. The particle size of ZnO will also affect the promoting effect greatly by COMSOL simulation. Therefore, this study for the first time reveals synergy of electric microfields for enhanced heterogeneous Fenton-like reactions, providing a low-cost and effective strategy for enhanced persulfate catalysis.

Revealing the synergistic mechanism of the generation, migration and nearby utilization of reactive oxygen species in FeOCl-MOF yolk-shell reactors

Fenton-like reactions is attractive for environmental pollutant control, but there is an urgent need to improve the utilisation of hydroxyl radicals (·OH) in practical applications. Here, for the first time, FeOCl is encapsulated within a Metal Organic Framework (MOF) (Materials of Institut Lavoisier-101 (MIL-101(Fe))) as a yolk-shell reactor (FeOCl-MOF) by in situ growth. The interaction between FeOCl and the MOF not only increases the electron density of FeOCl, but also shifts down the d-band centre. The increase of electron density could promote the efficient conversion of H₂O₂ to ·OH catalysed by FeOCl. And the shift of the d-band centre to the lower energy level facilitates the desorption of ·OH. Experimental and theoretical calculations showed that the high catalytic performance was attributed to the unique yolk-shell structure that concentrates the catalytic and adsorption sites in a confinement space, as well as the improved electron density and d-band centre for efficient generation, rapid desorption and utilized nearby of ·OH. Which is utilized nearby by the organic pollutants adsorbed by the surface MOF, thus greatly improving the effective conversion of H₂O₂ and the ·OH utilisation (from 25.5% (Fe²⁺/H₂O₂) to 77.1% (FeOCl-MOF/H₂O₂)). In addition, a catalytic reactor was constructed to achieve continuous efficient treatment of organic pollutants. This work provides a Fenton-like microreactor for efficient generation, rapid desorption, and nearby utilization of ·OH to improve future technologies for deep water purification in complex environments.

Chrome shaving-derived biochar as efficient persulfate activator: Ti-induced charge distribution modulation for 1O2 dominated nonradical process

Efficient degradation of organic contaminants by oxidative radicals remains a challenge due to invalid consumption of radicals and easy generation of secondary halogenated pollutants. In this work, an efficient and recyclable bimetallic biochar (Cr-Ti/BC) was developed through peroxydisulfate (PDS) activation via nonradical pathway for sulfamethoxazole (SMX) degradation. The Cr-Ti/BC exhibited excellent catalytic activity for 99.9 % of SMX removal with a high k_obs of 0.13 min^-1, and negligible inhibitory effects were observed under various pH condition. The activation mechanisms were (i) metastable reactive intermediates (Cr-Ti/BC-PDS) formation via an interaction between Cr-Ti/BC and PDS on the active defective sites (e.g., OH/COC, COOH, CO, nitric oxides, graphitic N, and pyridinic N), and (ii) ¹O₂ generation through electron transfer between Cr-Ti/BC-PDS intermediates and dissolved oxygen. The high reusability and strong stability of Cr-Ti/BC also verified the outstanding advantage of the Cr-Ti/BC during practical application. This study not only is the first study the catalytic performance of Cr and Ti co-doped biochar for PDS activation, but also successfully provides a promising strategy to induce a nonradical pathway for PDS activation, which is of great significance for the subsequent method design, and thus paving the path for exploiting advanced oxidation systems in practical application for organic contaminant removal toward polluted site remediation.

Quantitatively regulating the ketone structure of triazine-based covalent organic frameworks for efficient visible-light photocatalytic degradation of organic pollutants: Tunable performance and mechanisms

As promising visible-light-responsive photocatalysts, triazine-based covalent organic frameworks (CTFs) still suffer from broad bandgap and high electron-hole recombination. As such, different contents of electron-rich ketone group were introduced to CTFs (X % keto-CTF), aiming to clarify the mechanism of quantitatively regulating ketone for enhanced visible-light photocatalytic performance of CTFs. As ketone content increased, the bandgap narrowed, electron-hole recombination decreased, charge transfer and quantum yield increased. As a result, keto-CTF outperformed other keto-CTFs in visible-light photocatalytic degradation of tetracycline, and apparent rate constant of TC (k_obs) was 3.69 times higher than that of CTF. Importantly, ketone tuning induced varied types and concentrations of reactive species. Integrated with quantitative structure-activity relationships (QSARs) analysis and density functional theory (DFT) calculations, this study unravels how ketone content regulates bandgap structure of CTF, affects the contribution of varied reactive species, and quantitatively enhances the photocatalytic performance of CTFs. It also provides novel insights into the precise design and synthesis of CTFs-based catalyst structures for high-efficient visible-light photocatalytic degradation of organic pollutants.

2D MOF derived cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets for efficient Fenton-like catalysis: Tuning effect of oxygen functional groups in close vicinity to Co-N sites

Developing highly efficient catalysts for peroxymonosulfate (PMS) activation is an important issue in advanced oxidation processes (AOPs) technology. In this work, cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets derived from 2D metal-organic framework (MOF) were successfully fabricated. The as-prepared catalyst can effectively degrade tetracycline (TC) with a high reaction constant (0.088 min^-1). Quenching test, electron paramagnetic resonance (EPR) technology, and the electrochemical test indicate that the radical pathway plays a minor role in the degradation process, the ¹O₂ based nonradical pathway dominates the reaction. Experimental and density functional theory (DFT) studies revealed that the Co-N sites on the carbon structure serve as the dominant active sites, and the oxygen functional groups in close vicinity to Co-N sites can dramatically influence local electronic structure and its interaction with PMS molecule, a high correlation between the reaction constant and hydroxy groups content could be due to the Co-N sites close to hydroxyl groups has a moderate PMS adsorption energy. This work provides new insight into the design of highly efficient Fenton-like catalysts.

Persulfate activation by sludge-derived biochar for efficient degradation of 2,4-dichlorophenol: performance and mechanism

Porous sludge biochar (PSDBC) and zero-valent iron (ZVI) supported on porous sludge biochar composite (ZVI@PSDBC) were synthesized using municipal sludge through pyrolysis under N₂ atmosphere, which manifested upgraded performance in persulfate (PS) activation for 2,4-dichlorophenol (2,4-DCP) degradation. The 2,4-DCP (50 mg/L) could be almost completely removed within 20 min under relatively low PS dosage (0.5 mmol/L) in both PSDBC/PS and ZVI@PSDBC/PS systems, and the mineralization rate could respectively approach 73.7% and 91.6% in 60 min. Combined with a scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) characterization and electron spin-resonance (ESR) detection, electrochemical analysis, the radical and non-radical pathways in the catalytic systems were discussed. Graphitized structure and superior conductivity made PSDBC and ZVI@PSDBC not only act as electron donors in PS activation to create radicals (mainly SO₄^·- and ·OH), but also as "mediators" to facilitate the direct electron transfer from 2,4-DCP to the catalysts-PS complexes. The C=O groups of PSDBC and ZVI@PSDBC aided in the production of ¹O₂. Meanwhile, zero-valent iron nanoparticles promoted the formation of radicals as the reactive sites of PS, resulting in the most effective 2,4-DCP degradation in the ZVI@PSDBC/PS system. The stability and practicability of sludge biochar materials had been demonstrated in reusability and actual wastewater experiments. The findings provided a promising way for the reuse of municipal sludge and effective PS activation in wastewater treatment.

Electron-transfer-based peroxymonosulfate activation on defect-rich carbon nanotubes: Understanding the substituent effect on the selective oxidation of phenols

Nanocarbon-based persulfate oxidation technologies are promising for green elimination of phenolic pollutants. Previous studies revealed the electron transfer via defective carbon nanotube (CNTs) for selective oxidation of various phenols. However, an underlying relationship between the molecular structure of phenols and the selectivity of electron transfer-induced oxidation has not been well understood. Herein, we report that defect-rich CNTs could initiate electron-transfer regime from phenols to peroxymonosulfate (PMS), resulting in the efficient degradation of phenols. Further studies uncover a distinctive substituent group-dependent selective oxidation of phenols via the CNT-mediated electron transfer process. Specifically, the degradation rate of para-substituted phenols with electron-donating groups (e.g., -NH₂ and -OCH₃) is faster than those with electron-withdrawing groups (e.g., -NO₂ and -COOH). For a kind of substituted phenols, the substituent position has a great influence on the phenols degradation and their degradation rates follow this sequence: para > ortho > meta -position. Besides, increasing the number of the substituent group can accelerate the degradation of substituted phenols. This study elucidates the substituent effect on the electron transfer-dominated selective oxidation of phenols for the first time, which guides the application of carbon/persulfate system for the targeted remediation of phenols-polluted wastewater.

A novel multi-components hierarchical porous composite prepared from solid wastes for benzohydroxamic acid degradation

In this study, a novel carbon-wrapped-iron hierarchical porous catalyst (Fe/C-Mn₈₀₀) was prepared from electrolytic manganese residue (EMR) and sewage sludge (SS), which showed outstanding degradation ability toward benzohydroxamic acid (BHA, nearly 90 % was removed within 60 min) with low metal leaching rate. Mechanism exploration found transition metal ions (Fe and Mn) can serve as electron acceptors and facilitate the generation of persistent free radicals (PFRs). These transition metal ions and PFRs mainly participated in the single-electron pathway via activating PMS to generate a large amount of reactive oxygen species (ROS). While the electron negative graphitic N and CO groups not only improve the electronegatively of catalyst, but also acted as the electron sacrificers to favor the electron transfer and directly oxidized the absorbed BHA through the ternary activated outer-sphere complexes. Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) analysis further demonstrated the crucial role of pre-adsorption during the degradation process. This work provided a deep insight into the degradation mechanism of metal/carbon composite and promising opportunity widened the horizon of the high-value utilization of EMR and SS.

Potential Risk of NH3 Slip Arisen from Catalytic Inactive Site in Selective Catalytic Reduction of NOx with Metal-Free Carbon Catalysts

Ammonia emissions from industrial processes have rapidly increased in the past years. Recent advances have used carbon-based selective catalytic reduction (SCR) technology combined with a reaction-regeneration process to reduce NO_x from sintering flue gas, while NH₃ slip is seldom accounted for in this process. This study demonstrates that although the electrophilic carboxyl groups (-COOH) on metal-free carbon catalysts exhibit strong adsorption toward NH₃, they do not participate in the SCR reaction. As a result of the competitive adsorption of NH₃ in the reaction step, these catalytic inactive carboxyl groups not only prolong the time to the SCR steady state, but also result in the potential risk of NH₃ slip. A linear relationship with the equimolar ratio between carboxyl groups and slipped NH₃ was established in the regeneration steps. The slip of NH₃ could be alleviated by the decomposition of carboxyl groups, and special attention should be paid to the presence of inactive sites with strong NH₃ adsorption on industrial-employed carbon catalysts. In addition to advancing the understanding of the NH₃-SCR mechanism, this work also provides valuable opportunities for the control of ammonia emissions from industrial processes.

Improvement of Carbonyl Groups and Surface Defects in Carbon Nanotubes to Activate Peroxydisulfate for Tetracycline Degradation

Carbon nanotubes (CNTs) were considered a promising activator for persulfates due to their high electrical conductivity, large specific surface area and low toxicity. The functional groups and surface defects of CNTs could significantly affect their activation performance. In this study, CNTs with high C=O ratio and defect density (CNT-O-H) were prepared through a facile treatment of raw CNTs with HNO₃ oxidation followed by calcination at 800 °C under an argon atmosphere. X-ray photoelectron spectroscopy (XPS) and Raman results showed that the C=O proportion and defect degree (I_D/I_G) rose to 75% and 1.53, respectively. The obtained CNT-O-H possessed a superior performance towards peroxydisulfate (PDS) activation, and the degradation efficiency of tetracycline (TC) in the CNT-O-H/PDS system was increased to 75.2% from 56.2% of the raw CNTs/PDS system within 40 min. Moreover, the activity of CNT-O-H after use could be easily recovered with re-calcination. In addition, the CNT-O-H/PDS system exhibited high adaptabilities towards wide solution pH (2-10), common coexisting substances and diverse organic pollutants. Singlet oxygen (¹O₂) was confirmed to be the dominant reactive oxygen species (ROS) generated in the CNT-O-H/PDS system. It was inferred that surface C=O groups and defects of CNTs were the key site to activate PDS for TC degradation.

A Targeted Review of Current Progress, Challenges and Future Perspective of g-C3 N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃ N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃ N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃ N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃ N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃ N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃ N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.

Enhanced activation of persulfate improves the selective oxidation of alcohols catalyzed by earth-abundant metal oxides embedded on porous N-doped carbon derived from chitosan

Metal clusters oxide were embedded in an N-doped carbon and used as catalysts for the activation of peroxydisulfate or peroxymonosulfate in the selective oxidation of benzyl alcohol. Quenching tests were done to investigate the reaction mechanism.

Amorphous zirconium oxide activates peroxymonosulfate for selective degradation of organic compounds: Performance, mechanisms and structure-activity relationship

Application of heterogeneous advanced oxidation processes (AOPs) for wastewater treatment suffers from the low oxidant utilization efficiency, slow catalytic cycling and severe matrix interference. Herein, we report that amorphous zirconium dioxide (aZrO₂), a redox-inert metal oxide, can efficiently activate peroxymonosulfate (PMS) to degrade organic micropollutants under very low oxidant doses and complex coexisting matrices. Distinct from conventional AOPs where radicals are formed, the surface Zr(IV)-PMS* complex was identified as the principal reactive species, and primarily conducted oxygen-atom-transfer route with selected molecules. Quantitative structure-activity relationship analysis indicated that the formation of Zr(IV)-PMS* complex was governed by the density of the surface hydroxyl groups. The strong interaction between the Zr atom and PMS caused the deviation of the negative charge from Zr(IV) metal sites to the oxidant. As a result, the O-O bond of the adsorbed PMS was prolonged and its oxidation potential elevated, which enabled it to directly react with contaminants. This study indicates the potential of aZrO₂ as a novel and eco-friendly catalyst that activates PMS to selectively tackle organic contaminants, and sheds light on the designing of Fenton-like catalysts using redox-inert metals.

Roles of soil active constituents in the degradation of sulfamethoxazole by biochar/persulfate: Contrasting effects of iron minerals and organic matter

The biochar/persulfate (BC/PS) has been extensively applied in the degradation of organic contaminants in the aqueous solutions. However, much less work has been done on the degradation of organic contaminants in soil by BC/PS, especially on the unclear roles of soil active constituents in the degradation. This study was conducted to investigate the degradation of sulfamethoxazole (SMX) in two soils through PS oxidation activated by biochar. Biochar was produced via the pyrolysis of peanut shell at 400 °C and 700 °C, which was denoted as BC400 and BC700, respectively. Two soils used were red soil and paddy soil, mainly differing in iron minerals and organic matter. Both biochar promoted SMX degradation (42.6 %-90.7 %) in two soils, compared to PS alone (20.9 %-41.7 %). In BC400/PS system, the free radicals were the dominant reactive species for SMX degradation, while the electron transfer pathway played a vital role in the SMX degradation by BC700/PS. Higher SMX degradation was observed in red soil (41.7 %-97.8 %) than that in paddy soil (20.3 %-94.8 %), which was ascribed to the promotion of iron minerals in red soil yet the inhibition of organic matter in paddy soil. Specifically, the reaction between ≡Fe(III)/≡Fe(II) and PS on the surface of iron minerals in red soil generated more SO₄^•- and ^•OH, resulting in the enhanced SMX degradation. However, the consumption of free radicals and suppression of electron transfer pathway by organic matter in paddy soil inhibited SMX degradation. As the comparative carbonaceous materials to biochar, graphite exerted no obvious degradation effect, whereas activated carbon exhibited the comparable promoting efficacy to BC700. Both biochar, especially BC700, significantly (p < 0.05) alleviated the adverse effects of PS treatment on wheat (Triticum aestivum L.) growth. Overall, this study demonstrates that biochar/persulfate was effective in SMX degradation in soil and the degradation was affected by soil iron minerals and organic matter, which should be paid more attention in the persulfate remediation of organic contaminated soils at a specific site.

Enhanced degradation of sulfamethoxazole by non-radical-dominated peroxymonosulfate activation with Co/Zn co-doped carbonaceous catalyst: Synergy between Co and Zn

Bimetallic catalysts are often used for peroxymonosulfate (PMS) activation in recent years due to the synergistic effects between two different metal species. However, the synergy between Zn and other transition metal in PMS activation are rarely studied because of the ease of evaporation of Zn species at high temperature. In this work, a Co/Zn co-doped carbonaceous catalyst derived from ZIF-67@ZIF-8 (Z67@8D) was prepared successfully by the core-shell replacement strategy, and used to activate PMS for sulfamethoxazole (SMX) degradation. Due to the co-existence of Co/Zn species (e.g., Co/Zn-N site), Z67@8D showed a much higher catalytic activity than that of Z8D, Z67D, and several commercial oxides. Importantly, the CoZn synergy was deeply revealed by combining experiments and density functional theory (DFT) calculations, in which Zn could adjust the electron distribution of Co, reducing the PMS adsorption energy and thus enhancing PMS decomposition and singlet oxygen (¹O₂) formation. Moreover, formed ZnO and graphitic structure of Z67@8D could also promote the catalytic activity. In addition, the good stability and reusability, universal applicability, and high environmental robustness of Z67@8D were demonstrated. Our findings may provide a new insight into the Zn-based bimetallic catalysts for PMS activation and pollutant degradation.

Insights into the mechanism of carbocatalysis for peracetic acid activation: Kinetic discernment and active site identification

Peracetic-acid-based advanced oxidation processes (PAA-AOPs) on metal-free catalysts have emerged as charming strategies for water contaminant removal. However, the involved reactive species and their corresponding active sites are ambiguous. Herein, using carbon nanotube (CNT) as a model carbocatalyst, we demonstrated that, under neutral conditions, the CNT-PAA* complex was the dominant reactive species to oxidize phenolic compounds via electron-transfer process (ETP), whereas the surface-bound hydroxyl radicals (^·OH_surface) played a minor role on the basis of quenching and electrochemical tests as well as Raman spectroscopy. More importantly, the experimental and density functional theory (DFT) calculation results collaboratively proved that the active site for ETP was the sp²-hybridized carbon on the CNT bulk, while that for radical generation was the edge-located hydroxyl group (C-OH), which lowered the energy barrier for cleaving the O-O bond in CNT-PAA* complex. We further discerned the oxidation kinetic constants (k_oxid) of different pollutants from the apparent kinetic constants in CNT/PAA system. The significant negative linear correlation between lnk_oxid and half-wave potential of phenolic compounds suggests that the pollutants with a lower one-electron oxidation potential (i.e., stronger electron-donating ability) are more easily oxidized. Overall, this study scrutinizes the hybrid radical and non-radical mechanism and the corresponding active sites of the CNT/PAA system, providing insights into the application of PAA-AOPs and the development of ETP in the remediation of emerging organic pollutants.

Benzoquinone-assisted heterogeneous activation of PMS on Fe3S4 via formation of active complexes to mediate electron transfer towards enhanced bisphenol A degradation

Benzoquinone (BQ) is of great significance for enhancement of contaminants degradation in the homogeneous oxidation system of peroxymonosulfate (PMS). However, the role of BQ in the heterogeneous activation of PMS for contaminants oxidation is still not clear. Herein, this work reported that the addition of BQ into the Fe₃S₄/PMS system could effectively enhance the degradation and mineralization of bisphenol A (BPA). Mechanistic study uncovered that the BQ and PMS would form active complexes (BQ-PMS*) on the surface of Fe₃S₄ and the excited BQ-PMS* can oxidize the BPA. To be specific, the electron of BPA was extracted by BQ-PMS* and then transfer to the surface of Fe₃S₄. The surface electron can induce the change of valence state of S and Fe elements, which can trigger the degradation of BPA and inhibit the decomposition of BQ itself. To the best of our knowledge, it is the first time to unveil the positive role of BQ in the heterogeneous activation of PMS, which may shed new light on the establishment of high-efficient PMS-based oxidation technology for remediation of organic pollutant.

Removal of ofloxacin from water by natural ilmenite-biochar composite: A study on the synergistic adsorption mechanism of multiple effects

The preparation cost is one of the major constraints for adsorbent applied to practical situations. Here, a novel, economical and eco-friendly ilmenite biochar composite (ILM-BC) was successfully prepared by co-cracking of natural ilmenite and corn stover for the removal ofloxacin from water. The adsorption experiments indicated that the removal ofloxacin by ILM-BC was chemisorption and belonged to a spontaneous and entropy-increasing heat absorption process. Among composites, ILM-BC5 had superior adsorption capacity and stability, with a removal rate 1.6 times higher than that of biochar, and it could remove more than 90% ofloxacin in the pH range of 2-10. Multiple characterization results indicated that the adsorption of ILM-BC was the result of the synergistic effect of pore filling, hydrogen bonding, and π-π interactions. The introduction of ilmenite promoted hydrogen bonding formation and π-π interactions by enriching -OH and -COO on the surface of ILM-BC, which could enhance the adsorption capacity of ILM-BC.

Mechanistic and structure investigation of the KOH activation ZIF-8 derived porous carbon as metal-free for unprecedented peroxymonosulfate activation degradation of bisphenol A

The high-performance and free secondary pollution of the catalysts are the most critical issues in the peroxymonosulfate-based advanced oxidation processes (PMS-AOPs). In this research, the KOH was used to activate ZIF-8 derived carbon materials to synthesize the NC-KOH-x (x = 700, 800, 900 °C), which was an effective metal-free PMS activator. As-prepared NC-KOH-x showed significant improvement not only pore structure and BET surface area but also CO groups, and graphite N content, which were beneficial for the adsorptive and oxidative reaction. The NC-KOH-900 as an excellent metal-free carbon-catalyst exhibited considerable reactivity for bisphenol A (BPA) removal in broad pH ranges. Almost 100% of BPA was eliminated using 9 mg NC-KOH-900, 0.5 mM PMS within 60 min. Interestingly, It was found that the BPA removal efficiency by adding PMS after saturated adsorption of NC-KOH-x was better than that by adding NC-KOH-x and PMS simultaneously. Electronic paramagnetic resonance (EPR) and quenching experiments results demonstrated that the BPA degradation relied mainly on the nonradical (¹O₂) pathways and the defects (I_D/I_G), graphitic nitrogen, pyridinic nitrogen, and CO were verified as leading catalytic sites for BPA degradation via PMS activation. Finally, degradation pathways of BPA were proposed and the Toxicity Estimation Software Tool (T.E.S.T.) result implicated that the intermediates of BPA were environmentally friendly to the microorganism and recycled in the ecosystem. The outcomes of this study illustrated the NC-KOH-x owned many merits of state-of-the-art, eco-friendly, and high-performance for great potential practical application value.