Strain engineering and epitaxial stabilization of halide perovskites

Manipulating Lone-Pair-Driven Luminescence in 0D Tin Halides by Pressure-Tuned Stereochemical Activity from Static to Dynamic

The excellent luminescence properties and structural dynamics driven by the stereoactivity of the lone pair in a variety of low-dimensional ns2 metal halides have attracted growing investigations for optoelectronic applications. However, the structural and photophysical aspects of the excited state associated with the lone pair expression are currently open questions. Herein, zero-dimensional Sn-based halides with static stereoactive 5 s2 lone pairs are selected as a model system to understand the correlations between the distinctive lone pair expression and the excited-state structural relaxation and charge carrier dynamics by continuous lattice manipulation. Lattice compression drives 5 s2 lone pair active switching and self-trapped exciton (STE) redistribution by suppressing excited-state structural deformation of the isolated SnBr4 2- units. Our results demonstrate that the static expression of the 5 s2 lone pair results in a red broadband triplet STE emission with a large Stokes shift, while its dynamic expression creates a sky-blue narrowband emission dominated by the radiative recombination of singlet STEs. Our findings and the photophysical mechanism proposed highlight the stereochemical effects of lone pair expression in controlling light emission properties and offer constructive guidelines for tuning the optoelectronic properties in diverse ns2 metal halides.

Study of Elastic and Structural Properties of BaFe2As2 Ultrathin Film Using Picosecond Ultrasonics

We obtain the through-thickness elastic stiffness coefficient (C33) in nominal 9 nm and 60 nm BaFe2As2 (Ba-122) thin films by using picosecond ultrasonics. Particularly, we reveal the increase in elastic stiffness as film thickness decreases from bulk value down to 9 nm, which we attribute to the increase in intrinsic strain near the film-substrate interface. Our density functional theory (DFT) calculations reproduce the observed acoustic oscillation frequencies well. In addition, temperature dependence of longitudinal acoustic (LA) phonon mode frequency for 9 nm Ba-122 thin film is reported. The frequency change is attributed to the change in Ba-122 orthorhombicity (a-b)/(a+b). This conclusion can be corroborated by our previous ultrafast ellipticity measurements in 9 nm Ba-122 thin film, which exhibit strong temperature dependence and indicate the structural phase transition temperature Ts.

Imaging Light-Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping

In recent years, halide perovskite materials have been used to make high-performance solar cells and light-emitting devices. However, material defects still limit device performance and stability. Here, synchrotron-based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr3 (MA = CH3 NH3 + ) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light-induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X-ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability.

Composition Dependent Strain Engineering of Lead-Free Halide Double Perovskite: Computational Insights

The critical photophysical properties of lead-free halide double perovskites (HDPs) must be substantially improved for various applications. In this regard, strain engineering is a powerful tool for enhancing optoelectronic performance with precise control. Here, we employ ab initio simulations to investigate the impact of mild compressive and tensile strains on the photophysics of Cs2AgB'X6 (B' = Sb, Bi; X = Cl, Br) perovskites. Depending on the pnictogen and halide atoms, the band gap and band edge positions of HDPs can be tuned to a significant extent by controlling the applied external strain. Cs2AgSbBr6 has the most substantial strain response under structural perturbations. The subtle electronic interactions among the participating orbitals and the band dispersion at the edge states are enhanced under compressive strain, reducing the carrier effective masses. The exciton binding energies for these Br-based HDPs are in the range 59-78 meV and weaken in the compressed lattices, suggesting improved free carrier generation. Overall, the study emphasizes the potential of lattice strain engineering to boost the photophysical properties of HDPs that can ultimately improve their optoelectronic performance.

Surface Engineering of Methylammonium Lead Bromide Perovskite Crystals for Enhanced X-ray Detection

The surface quality of lead halide perovskite crystals can extremely influence their optoelectronic properties and device performance. Here, we report a surface engineering crystallization technique in which we in situ grow a polycrystalline methylammonium lead tribromide (MAPbBr3) film on top of bulk mm-sized single crystals. Such MAPbBr3 crystals with a MAPbBr3 passivating film display intense green emission under UV light. X-ray photoelectron spectroscopy demonstrates that these crystals with emissive surfaces are compositionally different from typical MAPbBr3 crystals that show no emission under UV light. Time-resolved photoluminescence and electrical measurements indicate that the MAPbBr3 film/MAPbBr3 crystals possess less surface defects compared to the bare MAPbBr3 crystals. Therefore, X-ray detectors fabricated using the surface-engineered MAPbBr3 crystals provide an almost 5 times improved sensitivity to X-rays and a more stable baseline drift with respect to the typical MAPbBr3 crystals.

Latest Innovations in 2D Flexible Nanoelectronics

2D materials with dangling-bond-free surfaces and atomically thin layers have been shown to be capable of being incorporated into flexible electronic devices. The electronic and optical properties of 2D materials can be tuned or controlled in other ways by using the intriguing strain engineering method. The latest and encouraging techniques in regard to creating flexible 2D nanoelectronics are condensed in this review. These techniques have the potential to be used in a wider range of applications in the near and long term. It is possible to use ultrathin 2D materials (graphene, BP, WTe2 , VSe2 etc.) and 2D transition metal dichalcogenides (2D TMDs) in order to enable the electrical behavior of the devices to be studied. A category of materials is produced on smaller scales by exfoliating bulk materials, whereas chemical vapor deposition (CVD) and epitaxial growth are employed on larger scales. This overview highlights two distinct requirements, which include from a single semiconductor or with van der Waals heterostructures of various nanomaterials. They include where strain must be avoided and where it is required, such as solutions to produce strain-insensitive devices, and such as pressure-sensitive outcomes, respectively. Finally, points-of-view about the current difficulties and possibilities in regard to using 2D materials in flexible electronics are provided.

Trivalent Europium-Doped CsCl Quantum Dots for MA-Free Perovskite Solar Cells with Inherent Bandgap through Lattice Strain Compensation

Cesium-formamidinium (Cs-FA) perovskites have garnered widespread interest owing to their excellent thermal- and photostability in achieving stable perovskite solar cells (PSCs). However, Cs-FA perovskite typically suffers from Cs+ and FA+ mismatches, affecting the Cs-FA morphology and lattice distortion, resulting in an enlarged bandgap (Eg ). In this work, "upgraded" CsCl, Eu3+ -doped CsCl quantum dots, are developed to solve the key issues in Cs-FA PSCs and also exploit the advantage of Cs-FA PSCs on stability. The introduction of Eu3+ promotes the formation of high-quality Cs-FA films by adjusting the Pb-I cluster. CsCl:Eu3+ also offsets the local strain and lattice contraction induced by Cs+ , which maintains the inherent Eg of FAPbI3 and decreases the trap density. Finally, a power conversion efficiency (PCE) of 24.13% is obtained with an excellent short-circuit current density of 26.10 mA cm-2 . The unencapsulated devices show excellent humidity stability and storage stability, and an initial PCE of 92.2% within 500 h under continuous light illumination, and bias voltage conditions is achieved. This study provides a universal strategy to address the inherent issues of Cs-FA devices and maintain the stability of MA-free PSCs to satisfy future commercial criteria.

Highly Stable and Efficient Formamidinium-Based 2D Ruddlesden-Popper Perovskite Solar Cells via Lattice Manipulation

Formamidinium (FA)-based 2D perovskites have emerged as highly promising candidates in solar cells. However, the insertion of 2D spacer cations into the perovskite lattice concomitantly introduces microstrain and unfavorable orientations that hinder efficiency and stability. In this study, by finely tuning the FA-based 2D perovskite lattice through spacer cation engineering, a stable lattice structure with balanced distortion, microstrain relaxation, and reduced carrier-lattice interactions is achieved. These advancements effectively stabilize the inherently soft lattice against light and thermal-aging stress. To reduce the photocurrent loss induced by undesired crystal texture, a polarity-matched molecular-type selenourea (SENA) additive is further employed to modulate the crystallization kinetics. The introduction of the SENA significantly inhibits the disordered crystallization induced by spacer cations and drives the templated growth of the quantum well structure with a vertical orientation. This controlled crystallization process effectively reduces crystal defects and enhances charge separation. Ultimately, the optimized FA-based perovskite photovoltaic devices achieve a remarkable power conversion efficiency (PCE) of 20.03% (certified steady-state efficiency of 19.30%), setting a new record for low-n 2D perovskite solar cells. Furthermore, the devices exhibit less than 1% efficiency degradation after operating at maximum power point for 1000 h and maintain excellent stability after thermal aging and cycles of cold-warm shock, respectively.

Future Research Directions in Perovskite Solar Cells: Exquisite Photon Management and Thermodynamic Phase Stability

As power conversion efficiency (PCE) of perovskite solar cells (PSCs) has rapidly increased up to 25.7% in 2022, a curiosity about the achievable limit of the PCE has prevailed and demands understanding about the underlying fundamentals to step forward. Meanwhile, outstanding long-term stability of PSCs over 1000 h has been reported at operating conditions or under damp heat test with 85 °C/85% relative humidity. Herein comes the question as to whether the phase stability issue of perovskite crystal is completely resolved in the most recent state-of-the-art perovskite film or if it deceives everyone into believing so by significantly slowing the kinetics. On the one hand, the fundamental origins of a discrepancy between reported values and the theoretical limit are thoroughly examined, where the importance of light management is greatly emphasized with the introduction of external luminescence as a key parameter to narrow the gap. On the other hand, the phase stability of a perovskite film is understood from thermodynamic point of view to address viable approaches to lower the Gibbs free energy, distinguishing the kinetically trapped condition from the thermodynamically stable phase.

Zero Threshold for Water Adsorption on MAPbBr3

Hybrid organic-inorganic perovskites (HOIPs) have shown great promise in a wide range of optoelectronic applications. However, this performance is inhibited by the sensitivity of HOIPs to various environmental factors, particularly high levels of relative humidity. This study uses X-ray photoelectron spectroscopy (XPS) to determine that there is essentially no threshold to water adsorption on the in situ cleaved MAPbBr3 (001) single crystal surface. Using scanning tunneling microscopy (STM), it shows that the initial surface restructuring upon exposure to water vapor occurs in isolated regions, which grow in area with increasing exposure, providing insight into the initial degradation mechanism of HOIPs. The electronic structure evolution of the surface was also monitored via ultraviolet photoemission spectroscopy (UPS), evidencing an increased bandgap state density following water vapor exposure, which is attributed to surface defect formation due to lattice swelling. This study will help to inform the surface engineering and designs of future perovskite-based optoelectronic devices.

Buried-Interface Engineering of Conformal 2D/3D Perovskite Heterojunction for Efficient Perovskite/Silicon Tandem Solar Cells on Industrially Textured Silicon

Exploring strategies to control the crystallization and modulate interfacial properties for high-quality perovskite film on industry-relevant textured crystalline silicon solar cells is highly valued in the perovskite/silicon tandem photovoltaics community. The formation of a 2D/3D perovskite heterojunction is widely employed to passivate defects and suppress ion migration in the film surface of perovskite solar cells. However, realizing solution-processed heterostructures at the buried interface faces solvent incompatibilities with the challenge of underlying-layer disruption, and texture incompatibilities with the challenge of uneven coverage. Here, a hybrid two-step deposition method is used to prepare robust 2D perovskites with cross-linkable ligands underneath the 3D perovskite. This structurally coherent interlayer benefits by way of preferred crystal growth of strain-free and uniform upper perovskite, inhibits interfacial defect-induced instability and recombination, and promotes charge-carrier extraction with ideal energy-level alignment. The broad applicability of the bottom-contact heterostructure for different textured substrates with conformal coverage and various precursor solutions with intact properties free of erosion are demonstrated. With this buried interface engineering strategy, the resulting perovskite/silicon tandem cells, based on industrially textured Czochralski (CZ) silicon, achieve a certified efficiency of 28.4% (1.0 cm2 ), while retaining 89% of the initial PCE after over 1000 h operation.

Dislocation interactions during plastic relaxation of epitaxial colloidal crystals

The severe difficulty to resolve simultaneously both the macroscopic deformation process and the dislocation dynamics on the atomic scale limits our understanding of crystal plasticity. Here we use colloidal crystals, imaged on the single particle level by high-speed three-dimensional (3D) confocal microscopy, and resolve in real-time both the relaxation of the epitaxial misfit strain and the accompanying evolution of dislocations. We show how dislocation interactions give rise to the formation of complex dislocation networks in 3D and to unexpectedly sharp plastic relaxation. The sharp relaxation is facilitated by attractive interactions that promote the formation of new dislocations that are more efficient in mediating strain. Dislocation networks form fragmented structures, as dislocation growth is blocked by either attractive interactions, which result in the formation of sessile dislocation junctions, or by repulsion from perpendicular segments. The strength of these blocking mechanisms decreases with the thickness of the crystal film. These results reveal the critical role of dislocation interactions in plastic deformation of thin films and can be readily generalized from the colloidal to the atomic scale.

Thiocyanate-Stabilized Pseudo-cubic Perovskite CH(NH2)2PbI3 from Coincident Columnar Defect Lattices

α-FAPbI3 (FA+ = CH(NH2)2+) with a cubic perovskite structure is promising for photophysical applications. However, α-FAPbI3 is metastable at room temperature, and it transforms to the δ-phase at a certain period of time at room temperature. Herein, we report a thiocyanate-stabilized pseudo-cubic perovskite FAPbI3 with ordered columnar defects (α'-phase). This compound has a √5ap × √5ap × ap tetragonal unit cell (ap: cell parameter of primitive perovskite cell) with a band gap of 1.91 eV. It is stable at room temperature in a dry atmosphere. Furthermore, the presence of the α'-phase in a mixed sample with the δ-phase drastically reduces the δ-to-α transition temperature measured on heating, suggesting the reduction of the nucleation energy of the α-phase or thermodynamic stabilization of the α-phase through epitaxy. The defect-ordered pattern in the α'-phase forms a coincidence-site lattice at the twinned boundary of the single crystals, thus hinting at an epitaxy- or strain-based mechanism of α-phase formation and/or stabilization. In this study, we developed a new strategy to control defects in halide perovskites and provided new insight into the stabilization of α-FAPbI3 by pseudo-halide and grain boundary engineering.

Unveiling the Fatigue Behavior of 2D Hybrid Organic-Inorganic Perovskites: Insights for Long-Term Durability

2D hybrid organic-inorganic perovskites (HOIPs) are commonly found under subcritical cyclic stresses and suffer from fatigue issues during device operation. However, their fatigue properties remain unknown. Here, the fatigue behavior of (C4 H9 -NH3 )2 (CH3 NH3 )2 Pb3 I10 , the archetype 2D HOIP, is systematically investigated by atomic force microscopy (AFM). It is found that 2D HOIPs are much more fatigue resilient than polymers and can survive over 1 billion cycles. 2D HOIPs tend to exhibit brittle failure at high mean stress levels, but behave as ductile materials at low mean stress levels. These results suggest the presence of a plastic deformation mechanism in these ionic 2D HOIPs at low mean stress levels, which may contribute to the long fatigue lifetime, but is inhibited at higher mean stresses. The stiffness and strength of 2D HOIPs are gradually weakened under subcritical loading, potentially as a result of stress-induced defect nucleation and accumulation. The cyclic loading component can further accelerate this process. The fatigue lifetime of 2D HOIPs can be extended by reducing the mean stress, stress amplitude, or increasing the thickness. These results can provide indispensable insights into designing and engineering 2D HOIPs and other hybrid organic-inorganic materials for long-term mechanical durability.

Optical Memory, Switching, and Neuromorphic Functionality in Metal Halide Perovskite Materials and Devices

Metal halide perovskite based materials have emerged over the past few decades as remarkable solution-processable optoelectronic materials with many intriguing properties and potential applications. These emerging materials have recently been considered for their promise in low-energy memory and information processing applications. In particular, their large optical cross-sections, high photoconductance contrast, large carrier-diffusion lengths, and mixed electronic/ionic transport mechanisms are attractive for enabling memory elements and neuromorphic devices that are written and/or read in the optical domain. Here, recent progress toward memory and neuromorphic functionality in metal halide perovskite materials and devices where photons are used as a critical degree of freedom for switching, memory, and neuromorphic functionality is reviewed.

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α-FAPbI3 Phase Transition for High Efficiency Perovskite Solar Cells

The α-phase formamidinium lead tri-iodide (α-FAPbI3 ) has become the most promising photovoltaic absorber for perovskite solar cells (PSCs) due to its outstanding semiconductor properties and astonishing high efficiency. However, the incomplete crystallization and phase transition of α-FAPbI3 substantially undermine the performance and stability of PSCs. In this work, a series of the protic amine carboxylic acid ion liquids are introduced as the precursor additives to efficiently regulate the crystal growth and phase transition processes of α-FAPbI3 . The MA2 Pb3 I8 ·2DMSO phase is inhibited in annealing process, which remarkably optimizes the phase transition process of α-FAPbI3 . It is noted that the functional groups of carboxyl and ammonium passivate the undercoordinated lead ions, halide vacancies, and organic vacancies, eliminating the deleterious nonradiative recombination. Consequently, the small-area devices incorporated with 2% methylammonium butyrate (MAB) and 1.5% n-butylammonium formate (BAFa) in perovskite show champion efficiencies of 25.10% and 24.52%, respectively. Furthermore, the large-area modules (5 cm × 5 cm) achieve PCEs of 21.26% and 19.27% for MAB and BAFa additives, indicating the great potential for commercializing large-area PSCs.

Separating Crystal Growth from Nucleation Enables the In Situ Controllable Synthesis of Nanocrystals for Efficient Perovskite Light-Emitting Diodes

Colloidal perovskite nanocrystals (PNCs) display bright luminescence for light-emitting diode (LED) applications; however, they require post-synthesis ligand exchange that may cause surface degradation and defect formation. In situ-formed PNCs achieve improved surface passivation using a straightforward synthetic approach, but their LED performance at the green wavelength is not yet comparable with that of colloidal PNC devices. Here, it is found that the limitations of in situ-formed PNCs stem from uncontrolled formation kinetics: conventional surface ligands confine perovskite nuclei but fail to delay crystal growth. A bifunctional carboxylic-acid-containing ammonium hydrobromide ligand that separates crystal growth from nucleation is introduced, leading to the formation of quantum-confined PNC solids exhibiting a narrow size distribution. Controlled crystallization is further coupled with defect passivation using deprotonated phosphinates, enabling improvements in photoluminescence quantum yield to near unity. Green LEDs are fabricated with a maximum current efficiency of 109 cd A-1 and an average external quantum efficiency of 22.5% across 25 devices, exceeding the performance of their colloidal PNC-based counterparts. A 45.6 h operating half-time is further documented for an unencapsulated device in N2 with an initial brightness of 100 cd m-2 .

Multifunctional Perovskite Photodetectors: From Molecular-Scale Crystal Structure Design to Micro/Nano-scale Morphology Manipulation

Multifunctional photodetectors boost the development of traditional optical communication technology and emerging artificial intelligence fields, such as robotics and autonomous driving. However, the current implementation of multifunctional detectors is based on the physical combination of optical lenses, gratings, and multiple photodetectors, the large size and its complex structure hinder the miniaturization, lightweight, and integration of devices. In contrast, perovskite materials have achieved remarkable progress in the field of multifunctional photodetectors due to their diverse crystal structures, simple morphology manipulation, and excellent optoelectronic properties. In this review, we first overview the crystal structures and morphology manipulation techniques of perovskite materials and then summarize the working mechanism and performance parameters of multifunctional photodetectors. Furthermore, the fabrication strategies of multifunctional perovskite photodetectors and their advancements are highlighted, including polarized light detection, spectral detection, angle-sensing detection, and self-powered detection. Finally, the existing problems of multifunctional detectors and the perspectives of their future development are presented.

Stabilization of photoactive phases for perovskite photovoltaics

Interest in photovoltaics (PVs) based on Earth-abundant halide perovskites has increased markedly in recent years owing to the remarkable properties of these materials and their suitability for energy-efficient and scalable solution processing. Formamidinium lead triiodide (FAPbI₃)-rich perovskite absorbers have emerged as the frontrunners for commercialization, but commercial success is reliant on the stability meeting the highest industrial standards and the photoactive FAPbI₃ phase suffers from instabilities that lead to degradation - an effect that is accelerated under working conditions. Here, we critically assess the current understanding of these phase instabilities and summarize the approaches for stabilizing the desired phases, covering aspects from fundamental research to device engineering. We subsequently analyse the remaining challenges for state-of-the-art perovskite PVs and demonstrate the opportunities to enhance phase stability with ongoing materials discovery and in operando analysis. Finally, we propose future directions towards upscaling perovskite modules, multijunction PVs and other potential applications.

Perovskite single-crystal thin films: preparation, surface engineering, and application

Perovskite single-crystal thin films (SCTFs) have emerged as a significant research hotspot in the field of optoelectronic devices owing to their low defect state density, long carrier diffusion length, and high environmental stability. However, the large-area and high-throughput preparation of perovskite SCTFs is limited by significant challenges in terms of reducing surface defects and manufacturing high-performance devices. This review focuses on the advances in the development of perovskite SCTFs with a large area, controlled thickness, and high quality. First, we provide an in-depth analysis of the mechanism and key factors that affect the nucleation and crystallization process and then classify the methods of preparing perovskite SCTFs. Second, the research progress on surface engineering for perovskite SCTFs is introduced. Third, we summarize the applications of perovskite SCTFs in photovoltaics, photodetectors, light-emitting devices, artificial synapse and field-effect transistor. Finally, the development opportunities and challenges in commercializing perovskite SCTFs are discussed.

Residual Strain Evolution Induced by Crystallization Kinetics During Anti-Solvent Spin Coating in Organic-Inorganic Hybrid Perovskite

Organic-inorganic hybrid perovskite (OIHP) polycrystalline thin films are attractive due to their outstanding photoelectronic properties. The anti-solvent spin coating method is the most widely used to synthesize these thin films, and the residual strain is inevitably originates and evolves during the process. However, this residual strain evolution induced by crystallization kinetics is still poorly understood. In this work, the in situ and ex situ synchrotron grazing-incidence wide-angle X-ray scattering (GIWAXS) are utilized to characterize the evolution and distribution of the residual strain in the OIHP polycrystalline thin film during the anti-solvent spin coating process. A mechanical model is established and the mechanism of the crystallization kinetics-induced residual strain evolution process is discussed. This work reveals a comprehensive understanding of the residual strain evolution during the anti-solvent spin coating process in the OIHP polycrystalline thin films and provides important guidelines for the residual strain-related strain engineering, morphology control, and performance enhancement.

Long-chain anionic surfactants enabling stable perovskite/silicon tandems with greatly suppressed stress corrosion

Despite the remarkable rise in the efficiency of perovskite-based solar cells, the stress-induced intrinsic instability of perovskite active layers is widely identified as a critical hurdle for upcoming commercialization. Herein, a long-alkyl-chain anionic surfactant additive is introduced to chemically ameliorate the perovskite crystallization kinetics via surface segregation and micellization, and physically construct a glue-like scaffold to eliminate the residual stresses. As a result, benefiting from the reduced defects, suppressed ion migration and improved energy level alignment, the corresponding unencapsulated perovskite single-junction and perovskite/silicon tandem devices exhibit impressive operational stability with 85.7% and 93.6% of their performance after 3000 h and 450 h at maximum power point tracking under continuous light illumination, providing one of the best stabilities to date under similar test conditions, respectively.

Inhibited Crack Development by Compressive Strain in Perovskite Solar Cells with Improved Mechanical Stability

Metal halide perovskites are promising as next-generation photovoltaic materials, but stability issues are still a huge obstacle to their commercialization. Here, the formation and evolution of cracks in perovskite films during thermal cycling, which affect their mechanical stability, are investigated. Compressive strain is employed to suppress cracks and delamination by in situ formed polymers with low elastic modulus during crystal growth. The resultant devices pass the thermal-cycling qualification (IEC61215:2016), retaining 95% of the initial power conversion efficiency (PCE) and compressive strain after 230 cycles. Meanwhile, the p-i-n devices deliver PCEs of 23.91% (0.0805 cm² ) and 23.27% (1 cm² ). The findings shed light on strain engineering with respect to their evolution, which enables mechanically stable perovskite solar cells.

In Situ and Operando Characterizations of Metal Halide Perovskite and Solar Cells: Insights from Lab-Sized Devices to Upscaling Processes

The performance and stability of metal halide perovskite solar cells strongly depend on precursor materials and deposition methods adopted during the perovskite layer preparation. There are often a number of different formation pathways available when preparing perovskite films. Since the precise pathway and intermediary mechanisms affect the resulting properties of the cells, in situ studies have been conducted to unravel the mechanisms involved in the formation and evolution of perovskite phases. These studies contributed to the development of procedures to improve the structural, morphological, and optoelectronic properties of the films and to move beyond spin-coating, with the use of scalable techniques. To explore the performance and degradation of devices, operando studies have been conducted on solar cells subjected to normal operating conditions, or stressed with humidity, high temperatures, and light radiation. This review presents an update of studies conducted in situ using a wide range of structural, imaging, and spectroscopic techniques, involving the formation/degradation of halide perovskites. Operando studies are also addressed, emphasizing the latest degradation results for perovskite solar cells. These works demonstrate the importance of in situ and operando studies to achieve the level of stability required for scale-up and consequent commercial deployment of these cells.

Approaching the Fill Factor Limit in Dopant-Free Hole Transporting Layer-Based All-Inorganic Perovskite Solar Cells

As an important part of perovskite solar cells (PSCs), hole transporting layer (HTL) has a critical impact on the performance and stability of the devices. In an attempt to alleviate the moisture and thermal stability issues from the commonly used HTL Spiro-OMeTAD with dopant, it is urgent to develop novel HTLs with high stability. In this study, a new class of polymers D18 and D18-Cl are applied as undoped HTL for CsPbI₂Br-based PSCs. In addition to the excellent hole transporting properties, we unveil that D18 and D18-Cl with larger thermal expansion coefficient than that of CsPbI₂Br could impose a compressive stress onto the CsPbI₂Br film upon thermal treatment, which could release the residual tensile stress in the film. As a result, the efficiency of CsPbI₂Br-based PSCs with D18-Cl as HTL reaches 16.73%, and the fill factor (FF) exceeds 85%, which is one of the highest FF records for the conventional-structured device to date. The devices also show impressive thermal stability with over 80% of the initial PCE retained after 85 °C heating for 1500 h.

Narrow-bandgap Sn-Pb mixed perovskite single crystals for high-performance near-infrared photodetectors

Narrow-bandgap Sn-Pb mixed perovskite single crystals are highly promising as photoactive materials for efficient and low-cost near-infrared (NIR) photodetectors. However, because of the significant difference in the crystallization velocities for Pb- and Sn-based perovskites, Sn-Pb mixed perovskites are peculiarly prone to phase separation during the crystallization process, causing the degradation of the optical and electronic properties of materials. Herein, we propose a low-temperature space-confined technique (LT-SCT) that simultaneously reduces the crystallization velocities of pure Sn and Pb perovskites, enabling the fabrication of pure-phase (FASnI₃)_0.1(MAPbI₃)_0.9 single crystals. The resulting (FASnI₃)_0.1(MAPbI₃)_0.9 single crystals exhibit excellent crystallinity with a high hole mobility of 7.44 × 10³ cm² V^-1 s^-1 and a low surface trap density of 1.88 × 10⁹ cm^-2. These properties benefit the application of (FASnI₃)_0.1(MAPbI₃)_0.9 single crystals in self-powered NIR photodetectors and yield outstanding comprehensive performance, especially with a broad linear dynamic range of up to 163.5 dB, a large responsivity (R) of 0.53 A W^-1, and a fast response speed of 22.78 μs in the NIR spectral region (750-860 nm). Furthermore, high-quality NIR imaging and wearable health monitoring are achieved by employing high-performance and self-driven NIR photodetectors. This work contributes to developing Sn-Pb mixed perovskite single crystals and provides a promising candidate for efficient and low-cost NIR photodetection.

In Situ Quantification of Strain-Induced Piezoelectric Potential of Dynamically Bending ZnO Microwires

The piezoelectric properties of semiconductor micro/nanowires (M/NWs) are crucial for optimizing semiconductors' electronic structure and carrier dynamics. However, the dynamic characterization of the piezoelectric properties of M/NWs remains challenging. Here, a Kelvin probe force microscopy technique based on a dual-probe atomic force microscope is developed to achieve in situ piezoelectric potential measurements of dynamic bending MWs. This technique can not only characterize the surface potential on different crystal faces of ZnO MWs in a natural state through controllable axial rotation, but also investigate the piezoelectric potential of the dynamically bending flake-like ZnO MW at different points and under different strain loads. The results show that the surface potentials of different faces/positions of the ZnO MWs are varied significantly, and determine that the quasi-static conditions piezo-strain factor of the flake-like ZnO MW is 0.28 V/%, while the factor was 0.14 V/% under low-frequency (⩽5 Hz) sinusoidal strain loading. This work provides a significant methodology to further study piezoelectric materials, and it aims to facilitate their applications in piezoelectric devices and systems.

Stabilization of the Alkylammonium Cations in Halide Perovskite Thin Films by Water-Mediated Proton Transfer

The development of alkylammonium lead trihalide perovskite (ALHP) photovoltaics has grown rapidly over the past decade. However, there are remaining critical challenges, such as proton defects, which can lead to the material instability of ALHPs. Although specific strategies, including the use of halide additives, have significantly reduced the defects, a fundamental understanding of the defect passivation mechanism remains elusive. Herein, an approach and mechanism for minimizing proton defects in ALHP crystals by adding ionized halides to the perovskite precursor solution are reported. This work clarifies that the ionized halides induced proton transfer from H₂ O to the alkylammonium cation in the precursor solution, stabilizing the ALHP crystals. The fundamental characteristics of ALHP and its precursors are examined by X-ray diffraction, transmittance electron microscopy, in situ extended X-ray absorption fine structure, Fourier transform NMR spectroscopy, and Fourier transform infrared spectroscopy. The findings from this work will guide the development of highly stable ALHP crystals, enabling efficient and stable optoelectronic ALHP devices.

Emergence of Rashba-/Dresselhaus effects in Ruddlesden-Popper halide perovskites with octahedral rotations

Ruddlesden-Popper halide perovskites are highly versatile quasi-two-dimensional energy materials with a wide range of tunable optoelectronic properties. Here we use the all-inorganic Csn+1Pb_nX3n+1Ruddlesden-Popper perovskites with X = I, Br, and Cl to systematically model the effect of octahedral tilting distortions on the energy landscape, band gaps, macroscopic polarization, and the emergence of Rashba-/Dresselhaus splitting in these materials. We construct all uniquen = 1 andn = 2 structures following from octahedral tilts and use first-principles density functional theory to calculate total energies, polarizations and band structures, backed up by band gap calculations using theGWapproach. Our results provide design rules for tailoring structural distortions and band-structure properties in all-inorganic Ruddlesden-Popper perovskites through the interplay of the amplitude, direction, and chemical character of the antiferrodistortive distortion modes contributing to each octahedral tilt pattern. Our work emphasizes that, in contrast to three-dimensional perovskites, polar structures may arise from a combination of octahedral tilts, and Rashba-/Dresselhaus splitting in this class of materials is determined by the direction and Pb-I orbital contribution of the polar distortion mode.

Abnormal In-Plane Thermomechanical Behavior of Two-Dimensional Hybrid Organic-Inorganic Perovskites

The implementation of two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) in semiconductor device applications will have to accommodate the co-existence of strain and temperature stressors and requires a thorough understanding of the thermomechanical behavior of 2D HOIPs. This will mitigate thermomechanical stability issues and improve the durability of the devices, especially when one considers the high susceptibility of 2D HOIPs to temperature due to their soft nature. Here, we employ atomic force microscopy (AFM) stretching of suspended membranes to measure the temperature dependence of the in-plane Young's modulus (E_∥) of model Ruddlesden-Popper 2D HOIPs with a general formula of (CH₃(CH₂)₃NH₃)₂(CH₃NH₃)_n-1Pb_nI_3n+1 (here, n = 1, 3, or 5). We find that E_∥ values of these 2D HOIPs exhibit a prominent non-monotonic dependence on temperature, particularly an abnormal thermal stiffening behavior (nearly 40% change in E_∥) starting around the order-disorder transition temperature of the butylammonium spacer molecules, which is significantly different from the thermomechanical behavior expected from their 3D counterpart (CH₃NH₃PbI₃) or other low-dimensional material systems. Further raising the temperature eventually reverses the trend to thermal softening. The magnitude of the thermally induced change in E_∥ is also much higher in 2D HOIPs than in their 3D analogs. Our results can shed light on the structural origin of the thermomechanical behavior and provide needed guidance to design 2D HOIPs with desired thermomechanical properties to meet the application needs.

An embedded interfacial network stabilizes inorganic CsPbI3 perovskite thin films

The black perovskite phase of CsPbI3 is promising for optoelectronic applications; however, it is unstable under ambient conditions, transforming within minutes into an optically inactive yellow phase, a fact that has so far prevented its widespread adoption. Here we use coarse photolithography to embed a PbI2-based interfacial microstructure into otherwise-unstable CsPbI3 perovskite thin films and devices. Films fitted with a tessellating microgrid are rendered resistant to moisture-triggered decay and exhibit enhanced long-term stability of the black phase (beyond 2.5 years in a dry environment), due to increasing the phase transition energy barrier and limiting the spread of potential yellow phase formation to structurally isolated domains of the grid. This stabilizing effect is readily achieved at the device level, where unencapsulated CsPbI3 perovskite photodetectors display ambient-stable operation. These findings provide insights into the nature of phase destabilization in emerging CsPbI3 perovskite devices and demonstrate an effective stabilization procedure which is entirely orthogonal to existing approaches.

Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Halide perovskite semiconductors with extraordinary optoelectronic properties have been fascinatedly studied. Halide perovskite nanocrystals, single crystals, and thin films have been prepared for various fields, such as light emission, light detection, and light harvesting. High-performance devices rely on high crystal quality determined by the nucleation and crystal growth process. Here, the fundamental understanding of the crystallization process driven by supersaturation of the solution is discussed and the methods for halide perovskite crystals are summarized. Supersaturation determines the proportion and the average Gibbs free energy changes for surface and volume molecular units involved in the spontaneous aggregation, which could be stable in the solution and induce homogeneous nucleation only when the solution exceeds a required minimum critical concentration (C_min ). Crystal growth and heterogeneous nucleation are thermodynamically easier than homogeneous nucleation due to the existent surfaces. Nanocrystals are mainly prepared via the nucleation-dominated process by rapidly increasing the concentration over C_min , single crystals are mainly prepared via the growth-dominated process by keeping the concentration between solubility and C_min , while thin films are mainly prepared by compromising the nucleation and growth processes to ensure compactness and grain sizes. Typical strategies for preparing these three forms of halide perovskites are also reviewed.

Heteroepitaxy of Large-Area, Monocrystalline Lead Halide Perovskite Films on Gallium Arsenide

Lead halide perovskite materials have been emerging as promising candidates for high-performance optoelectronic devices. Significant efforts have sought to realize monocrystalline perovskite films on a large scale. Here, we epitaxially grow monocrystalline methylammonium lead tribromide (MAPbBr₃) films on lattice-matched gallium arsenide (GaAs) substrates on a centimeter scale. In particular, a solution-processed lead(II) sulfide (PbS) layer provides a lattice-matched and chemical protective interface for the solid-gas reaction to form MAPbBr₃ films on GaAs. Structure characterizations identify the crystal orientations in the trilayer MAPbBr₃/PbS/GaAs epistructure and confirm the monocrystalline nature of MAPbBr₃ on PbS/GaAs. The dynamic evolution of surface morphologies during the growth indicates a two-step epitaxial process. These fundamental understandings and practical growth techniques offer a viable guideline to approach high-quality perovskite films for previously inaccessible applications.

Strain Relaxation on Perovskite Surface via Light-Enhanced Ionic Homogeneity

The efficiency and stability of perovskite solar cells (PSCs) can be either deteriorated or enhanced by strain at interfaces, which is sensitive to various external conditions, particularly light illumination. Here we investigated the vertical strain distribution in perovskite films synthesized under light illumination with various wavelengths. The films were formed by reacting formamidinium iodide (FAI)/methylammonium chloride (MACl) vapor with vapor-deposited PbI₂ (CsBr) films. Strain in the films was evaluated with incident-angle-dependent grazing-incidence wide-angle X-ray scattering, which showed out-of-plane compressive and in-plane tensile strains, particularly on the surface. Short-wavelength light relaxed the strain on the perovskite surface via promotion of ionic diffusion, including FA, MA, Cs, and I, to reach vertical ionic homogeneity. With the charge trap concentration being reduced, both the efficiency and stability were greatly improved. This finding provides deep insight into the effect of light on strain in PSCs.

Perovskite Wide-Angle Field-Of-View Camera

Researchers have attempted to create wide-angle field-of-view (FOV) cameras inspired by the structure of the eyes of animals, including fisheye and compound eye cameras. However, realizing wide-angle FOV cameras simultaneously exhibiting low distortion and high spatial resolution remains a significant challenge. In this study, a novel wide-angle FOV camera is developed by combining a single large-area flexible perovskite photodetector (FP-PD) using computational technology. With this camera, the proposed single-photodetector imaging technique can obtain high-spatial-resolution images using only a single detector, and the large-area FP-PD can be bent further to collect light from a wide-angle FOV. The proposed camera demonstrates remarkable features of an extraordinarily tunable wide FOV (greater than 150°), high spatial resolution of 256 × 256 pixels, and low distortion. It is believed that the proposed compatible and extensible camera prototype will promote the development of high-performance versatile FOV cameras.

Pressure-Induced Indirect-Direct Bandgap Transition of CsPbBr3 Single Crystal and Its Effect on Photoluminescence Quantum Yield

Despite extensive study, the bandgap characteristics of lead halide perovskites are not well understood. Usually, these materials are considered as direct bandgap semiconductors, while their photoluminescence quantum yield (PLQY) is very low in the solid state or single crystal (SC) state. Some researchers have noted a weak indirect bandgap below the direct bandgap transition in these perovskites. Herein, application of pressure to a CsPbBr3 SC and first-principles calculations reveal that the nature of the bandgap becomes more direct at a relatively low pressure due to decreased dynamic Rashba splitting. This effect results in a dramatic PLQY improvement, improved more than 90 times, which overturns the traditional concept that the PLQY of lead halide perovskite SC cannot exceed 10%. Application of higher pressure transformed the CsPbBr3 SC into a pure indirect bandgap phase, which can be maintained at near-ambient pressure. It is thus proved that lead halide perovskites can induce a phase transition between direct and indirect bandgaps. In addition, distinct piezochromism is observed for a perovskite SC for the first time. This work provides a novel framework to understand the optoelectronic properties of these important materials.

Balancing Lattice Strain by Embedded Ionic Liquid for the Stabilization of Formamidinium-Based Perovskite Solar Cells

Formamidinium (FA)-based perovskites remained state-of-the-art in the field of perovskite solar cells (PSCs) owing to the exceptional absorption and carrier transport properties, while the transition from photoactive (α-) to photoinactive (δ-FAPbI₃) phase is the impediment that causes performance degradation and thus limits the deployment of FA-based PSCs. The unfavorable phase transition originates from tensile strain in the FAPbI₃ crystal lattice, which undergoes structural reorganization for lattice strain balancing. In this work, we found that the ionic liquid (IL) could be used as the strain coordinator to balance the lattice strain for stability improvement of FAPbI₃ perovskite. We theoretically studied the electronic coupling between IL and FAPbI₃ and unraveled the originality of the IL-induced compressive strain. The strain-relaxed α-FAPbI₃ by IL showed robust stability against environmental factors, which can withstand ambient aging for 40 days without any phase transition or decomposition. Moreover, the strain-relaxed perovskite films showed a lower trap density and resulted in conversion efficiency improvement from 18.27 to 19.88%. Based on this novel strain engineering strategy, the unencapsulated PSCs maintained 90% of their initial efficiency under ambient-air aging for 50 days.

Single-crystal organometallic perovskite optical fibers

Semiconductors in their optical-fiber forms are desirable. Single-crystal organometallic halide perovskites have attractive optoelectronic properties and therefore are suitable fiber-optic platforms. However, single-crystal organometallic perovskite optical fibers have not been reported before due to the challenge of one-directional single-crystal growth in solution. Here, we report a solution-processed approach to continuously grow single-crystal organometallic perovskite optical fibers with controllable diameters and lengths. For single-crystal MAPbBr₃ (MA = CH₃NH₃⁺) perovskite optical fiber made using our method, it demonstrates low transmission losses (<0.7 dB/cm), mechanical flexibilities (a bending radius down to 3.5 mm), and mechanical deformation-tunable photoluminescence in organometallic perovskites. Moreover, the light confinement provided by our organometallic perovskite optical fibers leads to three-photon absorption (3PA), in contrast with 2PA in bulk single crystals under the same experimental conditions. The single-crystal organometallic perovskite optical fibers have the potential in future optoelectronic applications.

Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries

Manipulating the reversible redox chemistry of transition metal dichalcogenides for energy storage often faces great challenges as it is difficult to regulate the discharged products directly. Herein we report that tensile-strained MoSe₂ (TS-MoSe₂) can act as a host to transfer its strain to corresponding discharged product Mo, thus contributing to the regulation of Gibbs free energy change (ΔG) and enabling a reversible sodium storage mechanism. The inherited strain results in lattice distortion of Mo, which adjusts the d-band center upshifted closer to the Fermi level to enhance the adsorbability of Na₂Se, thereby leading to a decreased ΔG of the redox chemistry between Mo/Na₂Se and MoSe₂. Ex situ and in situ experiments revealed that, unlike the unstrained MoSe₂, TS-MoSe₂ shows a highly reversible sodium storage, along with an evidently improved reaction kinetics. This work sheds light on the study on electrochemical energy storage mechanism of other electrode materials.

Manipulating the redox chemistry of transition metal dichalcogenides still faces challenges. Here the authors report that tensile-strained MoSe2 can pass on the strain to its sodiated product Mo, and thus regulate the Gibbs free energy in the charging process to enable the reversible sodium storage.

Strain propagation in layered two-dimensional halide perovskites

Impulsive light excitation presents a powerful tool for investigating the interdependent structural and electronic responses in layered two-dimensional (2D) halide perovskites. However, detailed understanding of the nonlinear lattice dynamics in these soft hybrid materials remains limited. Here, we explicate the intrinsic strain propagation mechanisms in 2D perovskite single crystals using transient reflection spectroscopy. Ultrafast photoexcitation leads to the generation of strain pulses via thermoelastic (TE) stress and deformation potential (DP) interaction whence their detection proceed via Brillouin scattering. Using a two-temperature model together with strain wave propagation, we discern the TE and DP contributions in strain generation. Hot carrier cooling plays a dominant role in effecting the weak modulation amplitude. Out-of-plane lattice stiffness is reduced by the weak van der Waals bond between organic layers, resulting in a slow strain propagation velocity. Our findings inject fresh insights into the basic strain properties of layered perovskites critical for manipulating their functional properties for new applications.

Enhanced Phase Stability of Compressive Strain-Induced Perovskite Crystals

Control of strain in perovskite crystals has been considered as an effective strategy to ensure the phase stability of perovskite films where a compressive strain is particularly preferred over a tensile strain due to a lowered Gibbs free energy by the unit cell contraction effect. Here we adapt the strategy of strain control into perovskite solar cells in which the compressive strain is applied by utilizing a thermal expansion difference between the perovskite film and an adjacent layer. Poly(4-butylphenyldiphenylamine), with a higher thermal expansion coefficient compared to that of perovskite, is employed as a substrate for perovskite crystal growth at 100 °C, followed by cooling to room temperature. The applied compressive strain at the interface, as a result of a greater contraction of the polymer compared to the perovskite film, is confirmed by grazing incidence X-ray diffraction showing a red peak shift with increasing secondary angle. The compressive strain-induced perovskite film shows relatively constant absorbance spectra as a function of time. In the meantime, the absorbance spectra of a film without strain control exhibit a gradual decay with developing an Urbach tail. Importantly, the effect of strain engineering is remarkably prominent in the long-term photovoltaic performance. The photocurrent drops by 41% over 911 h without controlling strain, which is significantly improved by employing compressive strain, showing only a 6% drop in photocurrent from a shelf-stability test without encapsulation. It is also noted that an S-shaped kink appears in the current-voltage curves since 579-h-long storage for the device without strain control, leading to unreliable and overestimated fill factor and conversion efficiency. On the other hand, a 16% increase in fill factor with a stable performance is derived over 911 h from the compressive strain-induced device.

Impact of Strain Relaxation on 2D Ruddlesden-Popper Perovskite Solar Cells

Although the photovoltaic performance of perovskite solar cells (PSCs) has reached the commercial standards, the unsatisfactory stability limits their further application. Hydrophobic interface and encapsulation can block the damage of water and oxygen, while the instability induced by intrinsic residual strain remains inevitable. Here, the residual strain in a two-dimensional (2D) Ruddlesden-Popper (RP) perovskite film is investigated by X-ray diffraction and atomic force microscopy. It's found that the spacer cations contribute to the residual strain even though they are not in the inorganic cages. Benefited from strain relaxation, the film quality is improved, leading to suppressed recombination, promoted charge transport and enhanced efficiency. More significantly, the strain-released devices maintain 86 % of the initial efficiency after being kept in air with 85 % relative humidity (RH) for 1080 h, 82 % under maximum power point (MPP) tracking at 50 °C for 804 h and 86 % after continuous heating at 85 °C for 1080 h.

Room-temperature epitaxial welding of 3D and 2D perovskites

Formation of epitaxial heterostructures via post-growth self-assembly is important in the design and preparation of functional hybrid systems combining unique properties of the constituents. This is particularly attractive for the construction of metal halide perovskite heterostructures, since their conventional solution synthesis usually leads to non-uniformity in composition, crystal phase and dimensionality. Herein, we demonstrate that a series of two-dimensional and three-dimensional perovskites of different composition and crystal phase can form epitaxial heterostructures through a ligand-assisted welding process at room temperature. Using the CsPbBr₃/PEA₂PbBr₄ heterostructure as a demonstration, in addition to the effective charge and energy transfer across the epitaxial interface, localized lattice strain was observed at the interface, which was extended to the top layer of the two-dimensional perovskite, leading to multiple new sub-bandgap emissions at low temperature. Given the versatility of our strategy, unlimited hybrid systems are anticipated, yielding composition-, interface- and/or orientation-dependent properties.

Strain effects on halide perovskite solar cells

Halide perovskite solar cells (PSCs) have achieved power conversion efficiencies (PCEs) approaching 26%, however, the stability issue hinders their commercialization. Due to the soft ionic nature of perovskite materials, the strain effect on perovskite films has been recently recognized as one of the key factors that affects their opto-electronic properties and the device stability. Herein, we summarized the origins of strain, characterization techniques, and implications of strain on both perovskite film and solar cells as well as various strategies to control the strain. Finally, we proposed effective strategies for future strain engineering. We believe this comprehensive review could further facilitate researchers with a deeper understanding of strain effect and enhance the research activity in engineering the strain to further improve performance and especially the device stability toward commercialization.

This review systematically describes the origins, characterization and implications of strain in perovskite solar cells and proposes novel control strategies.

Tailoring the Time-Averaged Structure for Polarization-Sensitive Chiral Perovskites

Chiral perovskites have emerged as promising candidates for polarization-sensing materials. Despite their excellent chiroptical properties, the nature of their multiple-quantum-well structures is a critical hurdle for polarization-based and spintronic applications. Furthermore, as the origin of chiroptical activity in chiral perovskites is still illusive, the strategy for simultaneously enhancing the chiroptical activity and charge transport has not yet been reported. Here, we demonstrated that incorporating a Lewis base into the lattice can effectively tune the chiroptical response and electrical properties of chiral perovskites. Through solid-state nuclear magnetic resonance spectroscopic measurements and theoretical calculations, it was demonstrated that the material property manipulation resulted from the change in the time-averaged structure induced by the Lewis base. Finally, as a preliminary proof of concept, a vertical-type circularly polarized light photodetector based on chiral perovskites was developed, exhibiting an outstanding performance with a distinguishability of 0.27 and a responsivity of 0.43 A W^-1.

Direct Detection of Near-Infrared Circularly Polarized Light via Precisely Designed Chiral Perovskite Heterostructures

Chiral metal halide perovskites (CMHPs) have recently shown great potential for direct circularly polarized light (CPL) detection. However, owing to the limited cutoff wavelength edge of these CMHPs, most of the detectors presented thus far are characterized only in the ultraviolet and visible range; CMHPs that target at the near-infrared (NIR) region are still greatly desired. Here, we design a novel CMHP heterostructure, synthesized via solution-processed epitaxial growth of crystalline 3D MAPbI₃ on a 2D chiral (R-BPEA)₂PbI₄ (R-BPEA = (R)-1-(4-bromophenyl)ethylammonium) crystal, and provide the first demonstration of self-powered direct NIR-CPL detection. Compared with individual chiral (R-BPEA)₂PbI₄, the heterostructure not only retains the spin selectivity but also allows much broader absorbance, especially beyond 780 nm, where the (R-BPEA)₂PbI₄ cannot absorb. Furthermore, the built-in electric potential in the heterojunction forces spontaneous separation/transport of photogenerated carriers, enabling the fabrication of devices operating without external energy supply. By making use of the abovementioned advantages, the self-powered CPL detectors of the (R-BPEA)₂PbI₄/MAPbI₃ heterostructures hence show competitive circular polarization sensitivity at 785 nm with a high anisotropy factor of up to 0.25. In addition, a large on/off switching ratio of ∼10⁵ and an impressive detectivity of ∼10¹⁰ Jones are also achieved. As a pioneer study, our results may broaden the material scope for future chiroptical devices based on CMHPs.