A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils

Bioremediation potential of cadmium by recombinant Escherichia coli surface expressing metallothionein MTT5 from Tetrahymenathermophila

Cadmium (Cd) is a common heavy metal contaminant in industrial wastewater that causes many diseases in humans. Metallothionein (MT), a cysteine-rich metal-binding protein, is well known in chelate-heavy metals. In this study, we expressed MTT5 of Tetrahymena thermophila fused with Lpp-OmpA in the outer membrane of Escherichia coli to determine its ability to accumulate and adsorb Cd. Our results revealed that our recombinant E. coli had a 4.9-fold greater Cd adsorption compared to wild E. coli. Adsorption isothermic analysis demonstrated that the adsorption behavior for Cd in our recombinant bacteria was better fitted into the Freundlich isotherm model than Langmuir isotherm model. Fourier-transform infrared spectroscopy indicated that phosphate and organic phosphate groups were involved in the interaction between Cd and the bacterial surface. Using quantitative reverse transcription polymerase chain reaction, we further showed that the expression of metal-resistance genes (dnaK and clpB) was downregulated due to surface MTT5 protected our recombinant bacteria from Cd²⁺ adsorption. Furthermore, we showed that our recombinant bacteria could adsorb Cd from the contaminated wastewater containing other metals and were suggested to be applied in the field study.

24-epibrassinolide improves cadmium tolerance and lateral root growth associated with regulating endogenous auxin and ethylene in Kentucky bluegrass

The application of phytohormones is a viable technique to increase the efficiency of phytoremediation in heavy metal-contaminated soils. The objective of this study was to determine how the application of 24-epibrassinolide (EBR), a brassinosteroid analog, could regulate root growth and tolerance to cadmium (Cd) stress in Kentucky bluegrass. As a result, the number of lateral root primordia and total root length in the Cd-treated seedlings decreased by 33.1 % and 56.5 %, respectively. After the application of EBR, Cd accumulation in roots and leaves, and the negative effect of Cd on root growth were reduced under Cd stress. Additionally, the expression of the brassinosteroid signaling gene PpBRI1 was significantly upregulated by exogenous EBR. Moreover, exogenous EBR upregulated the expression of genes encoding antioxidant enzymes and improved the activity of antioxidant enzymes, thereby reduced oxidative stress in roots. Finally, targeted hormonomics analysis highlighted the utility of the application of EBR to alleviate the effect of Cd on the reduction in auxin (IAA) content and the increase in ethylene (ACC) content. These were known to be associated with the upregulation in the expression of auxin biosynthesis gene PpYUCCA1 and downregulation in the expression of ethylene biosynthesis gene PpACO1 in the roots treated with Cd stress. Overall, the application of EBR alleviated Cd-induced oxidative stress in addition to improving root elongation and lateral root growth crosstalk with auxin and ethylene in Kentucky bluegrass subjected to Cd stress. This study further highlights the potential role of brassinosteroids in improving the efficiency of phytoremediation for Cd-contaminated soils.

Removal of dyes, oils, alcohols, heavy metals and microplastics from water with superhydrophobic materials

A wide variety of pollutants can be currently found in water that are extremely difficult to remove due to their chemical composition and properties. A lot of effort has been made to tackle this issue that directly affects the environment. In this scenario, superhydrophobic surfaces, which have a water contact angle >150°, have emerged as an innovative technology that could be applied in different ways. Their environmental applications show promise in removing emerging pollutants from water. While the number of publications on superhydrophobic materials has remained largely unchanged since 2019, the number of articles on the environmental applications of superhydrophobic surfaces is still rising, corroborating the interest in this area. Herein, we briefly present the basis of superhydrophobicity and show the different materials that have been used to remove pollutants from water. We have identified five types of emerging pollutants that are efficiently removed by superhydrophobic materials: oils, microplastics, dyes, heavy metals, and ethanol. Finally, the future challenges of these applications are also discussed, considering the state of the art of the environmental applications of superhydrophobic materials.

Biogeochemical behavior and pollution control of arsenic in mining areas: A review

Arsenic (As) is one of the most toxic metalloids that possess many forms. As is constantly migrating from abandoned mining area to the surrounding environment in both oxidation and reducing conditions, threatening human health and ecological safety. The biogeochemical reaction of As included oxidation, reduction, methylation, and demethylation, which is closely associated with microbial metabolisms. The study of the geochemical behavior of arsenic in mining areas and the microbial remediation of arsenic pollution have great potential and are hot spots for the prevention and remediation of arsenic pollution. In this study, we review the distribution and migration of arsenic in the mining area, focus on the geochemical cycle of arsenic under the action of microorganisms, and summarize the factors influencing the biogeochemical cycle of arsenic, and strategies for arsenic pollution in mining areas are also discussed. Finally, the problems of the risk control strategies and the future development direction are prospected.

Moringa oleifera smoke induced positive changes in biochemical, metabolic, and antioxidant profile of rice seedling under cadmium stress

Cadmium as a heavy metal contaminates the agricultural soil and effect plant growth due to rapid increases in industrialization and anthropogenic activities. Smoke water of Moringa oleifera was used in the current study to alleviate the effect of cadmium on the physiological, biochemical, metabolic, and antioxidant profile of Basmati 385 and Shaheen Basmati seedling. Cadmium stress of 100, 200, and 400 µM were given to 28 days-old seedlings along with smoke water (1:1,000) for one week in hydroponic culture. As a result, Cd⁺² toxicity negatively affects the seedling length, fresh and dry weight, photosynthetic pigment, and electrolytes leakage, while the application of smoke water alleviated those effects. Furthermore, Cd⁺² content, cell injury, metabolic parameters (proline, total soluble sugar), and antioxidants (peroxidase, catalase) were increased with increasing Cd⁺² concentration while smoke water-treated seedlings showed reduction at high concentration. From present study, it can be concluded that smoke water had some regulatory compound which could reduce the Cd⁺² stress level in rice seedlings and improve plant growth.

Heavy metal accumulation efficiency and subsequent of cytogenotoxicity evaluation in the medicinal plant Equisetum hyemale

Heavy metals in soils represent a threat to the environment, food safety, as well as human and animal health. The bioaccumulation of these elements in plants might enhance medium- and long-term adverse health risk promoting genetic alterations that lead to dermal, gastrointestinal, circulatory, renal, and brain disorders. The present study aimed to determine the bioaccumulation potential and cytogenotoxic effect of Equisetum hyemale extracts. E. hyemale seedlings were divided into two groups: exposed group (plants cultivated in soil with heavy metals solution) and control (plants cultivated in soil with distilled water). Heavy metals were quantified in the cultivation soils (control and exposed) and extracts (ethanolic and infusion) of vegetative parts from E. hyemale cultivated in both soils. Root length and cytogenotoxic effect were determined utilizing Allium cepa bioassay. Data demonstrated that Equisetum hyemale present the ability to absorb and bioaccumulate different heavy metals including lead, copper, cobalt manganese, zinc, iron and chromium. Given this property E. hyemale may be considered a reliable bioindicator to assess cytogenotoxicity of certain substances that exert adverse risks to environment and human and animal health.

Resource recovery from hydroponic wastewaters using microalgae-based biorefineries: A circular bioeconomy perspective

As the world's population grows, it is necessary to rethink how countries throughout the world produce food in order to replace the conventional and unsustainable agricultural techniques. Microalgae cultivation using a nutrient-rich solution from hydroponic systems not only presents a novel approach to solving problems pertaining to the impact of the discharges on the natural environment but also provides a plethora of other biotechnological applications particularly in the productions of high value-added products and plants growth stimulants, which can be potentially assimilated into the circular bioeconomy (CBE) in the hydroponic sector. In this review, the potential and practicability of microalgae to be merged into hydroponics CBE are reviewed. Overall, the integration of microalgal biorefineries in hydroponics systems can be realized after considering their Technology Readiness Level and System Readiness Level beforehand. Several suggestions on strains and hydroponics system improvement using existing biotechnological tools, Artificial Intelligence (AI) and nanobiotechnology in support of the CBE will be covered.

Red Mud-Amended Soil as Highly Adsorptive Hybrid-Fill Materials for Controlling Heavy Metal Sewage Seepage in Industrial Zone

With the rapid development of urbanization, the problem of environmental pollution is becoming more and more serious. As a major pollutant, heavy metals have caused serious contamination in soil and groundwater. In order to prevent the diffusion of heavy metals in the soil from industrial sewage, the concept of hybrid-fill layer construction improved by red mud was proposed in this study. This study examines the adsorption capacities of lead and zinc ions and engineering characteristics on red mud-amended soils by direct shear, permeability, adsorption, desorption batch and column tests. Two mixing methods, full particle size displacement mixing and partial particle size displacement mixing, were adopted. The results showed that red mud effectively increased the adsorption capacity of soil to heavy metal ions, and the desorption rate of ions after adsorption was less than 3%, which had good anti-desorption ability. The optimum content of red mud in hybrid-fill material can be determined as 20%. The direct shear test showed that the internal friction angle of hybrid-fill material was 38.9°, and the cohesive force was 30.3 kPa, which met the engineering strength requirements of foundation materials. Based on the test results, red mud can be used as a barrier material to prevent heavy metal contamination in industrial sewage from diffusion, which controls not only heavy metal contamination but also consumes industrial by-products.

Fabrication of different adsorbents based on zirconium oxide, graphene oxide, and dextrin for removal of green malachite dye from aqueous solutions

In this study, graphene oxide and amine graphene were studied by binding to dextrin and zirconium oxide nanoparticles as adsorbent nanocomposites to the removal of dye. Identification and characterization of the synthesized materials were examined using FTIR, XRD, SEM, and BET analyses. Adsorption tests between adsorbents and green malachite (MG) dye solution for the synthesized nanocomposites were performed by considering parameters such as contact time, solution pH, and adsorbent dosage. The data indicated that dye removal increased with increasing the amount of adsorbent dosage. Increased dye removal by increasing the adsorbent dosage can be attributed to the increase of availability of the number of active sites. The active adsorption sites are saturated during the adsorption process, by the molecules of the adsorbate and filled over time. The results showed that the synthesized bio-composite had malachite green removal ability from aqueous media.

Separation of organic contaminant (dye) using the modified porous metal-organic framework (MIL)

Herein, the porous metal-organic framework (MIL-88B: Materials Institute Lavoisier) was synthesized and identified by FT-IR (Fourier transform infrared), SEM (Scanning Electron Microscopy), EDS (Energy Dispersive X-Ray Spectroscopy), and XRD (X-ray powder diffraction) analyses. Then MIL-88B was modified using 3-aminopropyl trimethoxy silane and presented as NH₂-MIL-88B. The synthesized materials were used to separate direct red dye 23 (DR23) as an organic contaminant from water. The effect of various important factors such as the amount of adsorbent, initial concentration of contaminants, and pH was investigated. The results showed that the modified adsorbent (NH₂-MIL-88B) had a higher adsorption capacity than the row adsorbent (MIL-88B). The amount of dye adsorption is high at lower pH values. The percentage of DR23 dye removal was complete under optimal conditions. Increasing the amount of adsorbent (0.001-0.003 g) and decreasing the pH (2.1-8.1) increases the percentage of dye removal and increasing the concentration of contaminant (50-125 mg/L) reduces the dye removal in the process. Isotherm data showed that the adsorption process followed the Langmuir model. Also, pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models were used to investigate the adsorption kinetics. Dye adsorption followed pseudo-second-order kinetics with correlation coefficient (0.99 <). The results showed that the modified adsorbent could be used as a suitable adsorbent with a high adsorption capacity for dye removal from water.

Accompanying effects of sewage sludge and pine needle biochar with selected organic additives on the soil and plant variables

The effects of synthetic fertilizer and nutrient leaching are causing serious problems impacting soil function and its fertility. Mitigation of nutrient leaching and use of chemical fertilizer is crucial as fertile land adds up sustainability to climate changes. Biochar produced from agricultural bio-waste and municipal solid waste has been used for crop production and when applied in combination with organic nutrients may support mitigation of nutrient loss and adverse effects of chemical fertilizers. Different types of biochar and their application for soil enhancement have been observed, pine needle and sewage sludge derived low-temperature biochar along with compost, organic fertilizer in the form of manure and microalgal biomass may interact with soil chemistry and plant growth to impact nutrient loss and compensate the hazardous effect of chemical fertilizer, but it has not been investigated yet. This present study elaborates application of sewage sludge and pine needle biochar produced at 400 °C in an application rate of 5 % w/w and 10 t h^-1 in combination with compost, manure and microalgal biomasses of Closteriopsis acicularis (BM1) and Tetradesmus nygaardi (BM2) on the growth of Chickpea (Cicer arietinum) and Fenugreek (Trigonella foenum-graecum) crop assessed in a pot experiment over a two crop (Chickpea - Fenugreek) cycle in Pakistan. Results depict that the pine needle biochar with additives has increased plant height by 104.1 ± 2.76 cm and fresh biomass by 49.9 ± 1.02 g, buffered the soil pH to 6.5 for optimum growth of crops and enhance carbon retention by 36 %. This study highlights the valorization of sewage sludge and pine needle into biochar and the effect of biochar augmentation, its impact on soil nutrients and plant biomass enhancement. The greener approach also mitigates and helps in the sustainable management of solid wastes.

Bioremediation of a saline-alkali soil polluted with Zn using ryegrass associated with Fusariumincarnatum

Biotechnological strategies have become effective in the remediation of polluted soils as they are cost-effective and do not present a risk of secondary pollution. However, using a single bioremediation technique (microorganism or plant) is not suitable for achieving a high remediation rate of polluted saline-alkali soils with heavy metals. Therefore, the present study aims to assess the effects and mechanisms of combined ryegrass and Fusarium incarnatum on the zinc (Zn)-polluted saline-alkali soil over 45 days. According to the obtained results, the combined Fusarium incarnatum-ryegrass showed the highest remediation rate of 49.35% after 45 days, resulting in a significantly lower soil Zn concentration than that observed in the control group. In addition, the inoculation of Fusarium incarnatum showed a positive effect on the soil EPS secretion. The soil protein contents ranged from 0.035 to 0.055 mg/kg, while the soil polysaccharide contents increased from 0.25 to 0.61 mg/g. The soil microbial flora and ryegrass showed resistance to saline and alkaline stresses through the secretion of extracellular polysaccharides. The three-dimensional fluorescence spectrum (3D-EEM) confirmed that EPS in the soil was mainly a fulvic acid-like substance. The fluorescein diacetate (FDA) hydrolase activity in the saline-alkali soil was first increased due to the effect of Fusarium incarnatum and then decreased to a minimum value of 96 μg/(g·h). In addition, the Fusarium incarnatum inoculation improved the diversity and richness of soil fungi. Although the Fusarium incarnatum inoculation had a slight effect on the germination of ryegrass, it increased the biomass and enrichment coefficient. The results revealed a translocation factor (TF) value of 0.316 at 45 days after ryegrass sowing, showing significant enrichment of the soil Zn heavy metal zinc in the ryegrass roots.

Remediation techniques for elimination of heavy metal pollutants from soil: A review

Contaminated soil containing toxic metals and metalloids is found everywhere globally. As a consequence of adsorption and precipitation reactions, metals are comparatively immobile in subsurface systems. Hence remediation techniques in such contaminated sites have targeted the solid phase sources of metals such as sludges, debris, contaminated soils, or wastes. Over the last three decades, the accumulation of these toxic substances inside the soil has increased dramatically, putting the ecosystem and human health at risk. Pollution of heavy metal have posed severe impacts on human, and it affects the environment in different ways, resulting in industrial anger in many countries. Various procedures, including chemical, biological, physical, and integrated approaches, have been adopted to get rid of this type of pollution. Expenditure, timekeeping, planning challenges, and state-of-the-art gadget involvement are some drawbacks that need to be properly handled. Recently in situ metal immobilization, plant restoration, and biological methods have changed the dynamics and are considered the best solution for removing metals from soil. This review paper critically evaluates and analyzes the numerous approaches for preparing heavy metal-free soil by adopting different soil remediation methods.

Assessing the effects of nickel on, e.g., Medicago sativa L. nodules using multidisciplinary approach

Industrial wastes and fertilizers can introduce excessive levels of nickel (Ni) into the environment, potentially causing threats to plants, animals, as well as human beings. However, the number of studies on the effects of Ni toxicity on nodules is fairly limited. To address this issue, the effects of increasing Ni concentration on alfalfa nodules were assessed at chemical, biochemical, and transcriptomic levels. For this purpose, plants were grown in soils supplied with Ni (control, 0 mg/kg; C1, 50 mg/kg; C2, 150 mg/kg; C3, 250 mg/kg; and C4, 500 mg/kg) for 90 days. Ni loads in leaves, roots, and nodules were monitored after the exposure period. A set of biochemical biomarkers of oxidative stress was determined in nodules including antioxidants and metal homeostasis as well as lipid peroxidation. Gene expression levels of the main targets involved in oxidative stress and metal homeostasis were assessed. Our data indicated a high concentration of Ni in leaves, roots, and nodules where values reached 25.64 ± 3.04 mg/kg, 83.23 ± 5.16 mg/kg, and 125.71 ± 4.53 mg/kg in dry weight, respectively. Moreover, a significant increase in nodule biomass was observed in plants exposed to C4 in comparison to control treatment and percentage increased by 63%. Then, lipid peroxidation increased with a rate of 95% in nodules exposed to C4. Enzymatic activities were enhanced remarkably, suggesting the occurrence of oxidative stress, with increased superoxide dismutase (SOD), glutathione reductase (GR), and ascorbate peroxidase (APX). Our results showed also a significant upregulation of SOD, GR and APX genes in nodules. Nodule homoglutathione (HGSH) levels increased with the different Ni concentrations, with a remarkable decrease of glutathione S-transferase (GST) activity and glutathione (GSH) content for the highest Ni concentration with 43% and 52% reduction, respectively. The phytochelatin (PC) and metallothionein (MT) concentrations increased in nodules, which implied the triggering of a cellular protection mechanism for coping with Ni toxicity. The results suggested that Ni promotes a drastic oxidative stress in alfalfa nodules, yet the expression of MT and PC to reduce Ni toxicity could be used as Ni stress bioindicators. Our findings provide new insights into the central role of alfalfa nodules in limiting the harmful effects of soil pollution. Therefore, nodules co-expressing antioxidant enzymes may have high phytoremediation potential.

The soil pH and heavy metals revealed their impact on soil microbial community

Soil microbial community is the main indicator having a crucial role in the remediation of polluted soils. These microbes can alter soil pH, organic matter in soils (SOM), soil physic-chemical properties, and potential soil respiration rate via their enzymatic activities. Similarly, heavy metals also have a crucial role in soil enzymatic activities. For this purpose, a number of methods are studied to evaluate the impact of soil pH (a key factor in the formation of biogeographic microbial patterns in bacteria) on bacterial diversity. The effects of pH on microbial activity are glamorous but still unclear. Whereas, some studies also indicate that soil pH alone is not the single key player in the diversity of soil bacteria. Ecological stability is achieved in a pollution-free environment and pH value. The pH factor has a significant impact on the dynamics of microbes' communities. Here, we try to discuss factors that directly or indirectly affect soil pH and the impact of pH on microbial activity. It is also discussed the environmental factors that contribute to establishing a specific bacterial community structure that must be determined. From this, it can be concluded that the environmental impact on soil pH, reducing soil pH and interaction with this factor, and reducing the effect of soil pH on soil microbial community.

Sustainable utilization of unavoidable food waste into nutritional media for the isolation of bacterial culture for the removal of heavy metals

This study aims to reuse food waste (FW) as growth media for bacterial cultures for bioremediation of heavy metal. The best natural medium was selected based on the carbon, nitrogen, and other elements. The batch culture of Comamonas terrae showed growth stability for 16 days in the pig bone medium. C. terrae showed the best growth at pH of 7.4, temperature of 35 °C, and medium concentration of 10 g/L. The C. terrae showed heavy metal (HM) removal efficiencies of Cd (52 %) Cr (63 %) Pb (62 %) and Zn (55 %). In addition, the Fourier transform infrared spectroscopy results revealed the bioadsorption of HM in C. terrae. The study suggests the C. terrae can efficiently remove HM and C. terrae may be used for bioremediation of HM. Therefore, pig bone waste is a cost-effective medium and a good solution for the valorization and reuse of FW in line with the circular economy.

Adsorption of Heavy Metal Ions Copper, Cadmium and Nickel by Microcystis aeruginosa

To investigate the treatment effect of algae biosorbent on heavy metal wastewater, in this paper, the adsorption effect of M. aeruginosa powder on heavy metal ions copper, cadmium and nickel was investigated using the uniform experimental method, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and TG-DSC comprehensive thermal analysis. The experimental results showed that the initial concentration of copper ion solution was 25 mg/L, the temperature was 30 °C, the pH value was 8 and the adsorption time was 5 h, which was the best condition for the removal of copper ions by algae powder adsorption, and the removal rate was 83.24%. The initial concentration of cadmium ion solution was 5 mg/L, the temperature was 35 °C, the pH value was 8 and the adsorption time was 4 h, which was the best condition for the adsorption of cadmium ion by algae powder, and the removal rate was 92.00%. The initial nickel ion solution concentration of 15 mg/L, temperature of 35 °C, pH value of 7 and adsorption time of 1 h were the best conditions for the adsorption of nickel ions by algae powder, and the removal rate was 88.67%. The spatial structure of algae powder changed obviously before and after adsorbing heavy metals. The functional groups such as amino and phosphate groups on the cell wall of M. aeruginosa enhanced the adsorption effect of heavy metal ions copper, cadmium and nickel. Additionally, M. aeruginosa adsorption of heavy metal ions copper, cadmium, nickel is an exothermic process. The above experiments show that M. aeruginosa can be used as a biological adsorbent to remove heavy metals, which lays a theoretical foundation for the subsequent treatment of heavy metal pollution by algae.

Study on the migration mechanisms of water-soluble agents in high-pressure rotary jetting remediation

High-pressure rotary jetting (HPRJ) remediation is a recent-applied technology for in situ remediation of contaminated soils. The effectiveness of remediation depends upon the migration and distribution of the injected agents in the soil. However, the corresponding migration mechanisms have received little attention. In this study, laboratory HPRJ tests and numerical simulations were performed using chlorine (Cl^-) as a tracer to investigate the transport during HPRJ and the subsequent advection and diffusion. The test results showed that the HPRJ transported Cl^- into the mixing zone by eroding the sand, and the radius of the mixing zone could be reasonably predicted by the erosion model. The Cl^- concentration decreased linearly along the radial direction in the mixing zone. In addition, the Cl^- transport distance increased with the increase in nozzle diameter, jetting times, especially injection pressure, and decreased with an increasing rotation speed. The Cl^- concentration and radial uniformity were correlated positively with rotation speed, particularly nozzle diameter and jetting times. Numerical simulation showed that part of Cl^- migrated from the mixing zone to diffusion zone by advection-diffusion after rotary jetting, which contributed positively to the agent distribution distance and uniformity. The Cl^- migration was dominated by advection in the initial stage (30 days), while diffusion became more important thereafter.

Valorization of fruit waste-based biochar for arsenic removal in soils

Fruit waste disposal is a serious global problem with only 20% of such waste being routinely treated prior to discharge. Two of the most polluting fruit wastes are orange peel and walnut shell and new methods are urgently required to valorize such waste. In the present study, they where valorized via conversion into biochars at 500 °C (OPB500 for orange peel-based biochar produced at 500 °C and WaSB500 for walnut shell-based biochar produced at 500 °C), and evaluated for arsenic adsorption. A pore-rich surface morphology was observed with a low H/C ratio indicating high stability. Spectroscopic studies revealed the presence of minerals and surface functional groups (amide, carbonyl, carboxyl, and hydroxyl) suggesting high potential for arsenic immobilization. Adsorption studies revealed an arsenic removal efficiency of 88.8 ± 0.04% for WaSB500 exposed to initial arsenic concentration of 8 ppm for 5% biochar dose at 25 °C and 30 min contact time. In comparison, OPB500 showed slightly lower removal efficiency of 80.7 ± 0.1% (10 ppm initial concentration, 5% dose, 25 °C, 90 min contact time). Peak shifts in XRD and FTIR spectra together with isotherm, kinetic, and thermodynamic studies suggested arsenic sequestration was achieved via a combination of chemisorption, physisorption, ion exchange, and diffusion. The present investigation suggests valorization of fruit waste into thermo-stable biochars for sustainable arsenic remediation in dynamic soil/water systems and establishes biochar's importance for waste biomass minimization and metal (loid) removal from fertile soils.

Advance in remediated of heavy metals by soil microbial fuel cells: Mechanism and application

In the past decade, studies on the remediation of heavy metals contaminated soil by microbial fuel cells (MFCs) have attracted broad attention because of the self-generated power and their multifield principles such as the extracellular electron transfer (EET) reduction, electromigration for heavy metals removal. However, given the bio electro-motive power from soil MFCs is weak and fluctuated during the remediation, we need to comprehensively understand the origination of driving force in MFC based on the analysis of the fundamental rationale of ion moving in cells and improve the performance via the appropriate configurations and operations. In this review, we first described the structures of soil MFCs for heavy metals remediation and compared the advantages of different types of configurations. Then, based on the theoretical models of heavy metal migration, enrichment, and reduction in soil MFCs, the optimization of soil MFCs including the length of the remediation area, soil conductivity, control of electrode reaction, and modification of electrodes were proposed. Accordingly, this review contributes to the application of bioelectrochemistry to efficiently remove heavy metals from soils.

In-situ stabilization of potentially toxic elements in two industrial polluted soils ameliorated with rock phosphate-modified biochars

The present study was aimed at determining the efficacy of rock phosphate (RP) 3% loaded in a green coconut shell, chicken manure, and vegetable waste to make green coconut-modified biochar (GMB), chicken manure modified-biochar (CMB), and vegetable waste-modified biochar (VMB) in the fixation of Cr, Pb, Cu, Zn, Ni, and Cd in Sharafi goth and Malir polluted soils. The impact of RP impregnated with organic waste material to produce modified biochars (MBs) on stabilizing PTEs from polluted soils and reducing their uptake by mustard plant has not yet been thoroughly investigated. All modified BCs in 0.5, 1, and 2% doses were used to stabilize Cr, Pb, Cu, Zn, Ni, and Cd in two polluted soils and to reduce their uptake by the mustard plant. The obtained results revealed that the maximum mustard fresh biomass was 17.8% higher with GMB 1% in Sharafi goth polluted soil and 25% higher with VMB 0.5% in Malir polluted soil than in the control treatment. After applying modified BCs, immobilization of Cr, Pb, Cu, Ni, and Cd was observed in both soils and it reduced the uptake of these elements by mustard plants. On the other hand, although Zn mobilization increased by 0.38% for CMB 0.5% and by 5.9% for VMB 0.5% in Sharafi goth polluted soil, as well as by 3.15% for GMB 1%, 6.34% for GMB 2%, and 4.78% for VMB 0.5% in Malir polluted soil, this was due to changes in soil pH and OM. It was found that GMB 1%, CMB 0.5%, and VMB 0.5% have the potential to increase Zn uptake by mustard, while VMB 2% can reduce the element uptake by the plant. Redundancy analysis showed that soil chemical parameters were negatively correlated with PTEs in both soils and reduced their uptake by mustard. The present study revealed that MBs can stabilize PTEs in industrial and wastewater soils polluted with multiple metals and reduce their uptake by plants.

Recent advances in soil remediation technology for heavy metal contaminated sites: A critical review

With the increasing development of industry and urbanization, heavy metal contaminated sites have become progressively conspicuous, particularly by unreasonable emissions from electroplating, nonferrous metals smelting, mine tailing, etc. In recent years, soil remediation technologies for heavy metal contaminated sites have developed rapidly. New and effective remediation technologies have emerged successively, and more successful practical applications have appeared. Therefore, systematical summarization of the current progress is essential. As a result, in this paper, some mainstream soil remediation technologies for heavy metal contaminated sites, including physical remediation (soil thermal desorption and soil replacement), bioremediation (phytoremediation and microbial remediation), chemical remediation (chemical leaching, chemical stabilization, electrokinetic remediation-permeable reactive barrier, and chemical oxidation/reduction), as well as various combined remediation are comprehensively reviewed. The influencing factors, advantages, disadvantages, remediation mechanism, and practical applications are also deeply discussed. Besides, the corresponding remediation strategies are put forward for the remediation of heavily polluted sites such as the chemical industry, smelting, and tailing areas. Overall, this review will be beneficial for the in-depth understanding and provide references for the reasonable selection and development of soil remediation technology for heavy metal contaminated sites.

Nano-architectural design of TiO2 for high performance photocatalytic degradation of organic pollutant: A review

In the past several decades, significant efforts have been paid toward photocatalytic degradation of organic pollutants in environmental research. During the past years, titanium dioxide nano-architectures (TiO₂ NAs) have been widely used in water purification applications with photocatalytic degradation processes under Uv/Vis light illumination. Photocatalysis process with nano-architectural design of TiO₂ is viewed as an efficient procedure for directly channeling solar energy into water treatment reactions. The considerable band-gap values and the subsequent short life time of photo-generated charge carriers are showed among the limitations of this approach. One of these effective efforts is the using of oxidation processes with advance semiconductor photocatalyst NAs for degradation the organic pollutants under UV/Vis irradiation. Among them, nano-architectural design of TiO₂ photocatalyst (such as Janus, yolk-shell (Y@S), hollow microspheres (HMSs) and nano-belt) is an effective way to improve oxidation processes for increasing photocatalytic activity in water treatment applications. In the light of the above issues, this study tends to provide a critical overview of the used strategies for preparing TiO₂ photocatalysts with desirable physicochemical properties like enhanced absorption of light, low density, high surface area, photo-stability, and charge-carrier behavior. Among the various nanoarchitectural design of TiO₂, the Y@S and HMSs have created a great appeal given their considerable large surface area, low density, homogeneous catalytic environment, favorable light harvesting properties, and enhanced molecular diffusion kinetics of the particles. In this review was summarized the developments that have been made for nano-architectural design of TiO2 photocatalyst. Additional focus is placed on the realization of interfacial charge and the possibility of achieving charge carriers separation for these NAs as electron migration is the extremely important factor for increasing the photocatalytic activity.

Molecular docking and optical sensor studies based on 2,4-diamino pyrimidine-5-carbonitriles for detection of Hg2

An organic chemical sensor based on pyrimidine was successfully produced through the green reaction between aromatic aldehyde, malononitrile, and guanidine carbonate using SBA-Pr-SO₃H. This fluorescence intensity of chemosensor (2,4-diamino-6-(phenyl)pyrimidine-5-carbonitrile) decreases by the addition of Hg²⁺ and its detection limit is about 14.89 × 10^-5 M, in fact, through the green synthesis, the ligand was yielded to detect Hg²⁺ and the importance of ligand was considered in docking studies. The molecular docking of 2,4-diamino-6-(phenyl)pyrimidine-5-carbonitrile compound has been done with the protein selective estrogen receptor 5ACC complexed with (Azd9496), Human Anaplastic Lymphoma Kinase Pdb; 2xp2 complex with crizotinib (PF-02341066) and human wee1 kinase Pdb; 5vc3 complexed with bosutinib. The ligands 2,4-diamino-6-(phenyl)pyrimidine-5-carbonitrile generate very good docking results with the protein Pdb; 2xp2, which is responsible for effective tumor growth inhibition.

A sustainable Decision Support System for soil bioremediation of toluene incorporating UN sustainable development goals

Decision Support System (DSS) is a novel approach for smart, sustainable controlling of environmental phenomena and purification processes. Toluene is one of the most widely used petroleum products, which adversely impacts on human health. In this study, Fusarium Solani fungi are utilized as the engine of the toluene bioremediation procedure for the monitoring part of DSS. Experiments are optimized by Central Composite Design (CCD) - Response Surface Methodology (RSM), and the behavior of the mentioned fungi is estimated by M5 Pruned model tree (M5P), Gaussian Processes (GP), and Sequential Minimal Optimization (SMOreg) algorithms as the prediction section of DSS. Finally, the control stage of DSS is provided by integrated Petri Net modeling and Failure Modes and Effects Analysis (FMEA). The findings showed that Aeration Intensity (AI) and Fungi load/Biological Waste (F/BW) are the most influential mechanical and biological factors, with P-value of 0.0001 and 0.0003, respectively. Likewise, the optimal values of main mechanical parameters include AI, and the space between pipes (S) are equal to 13.76 m³/h and 15.99 cm, respectively. Also, the optimum conditions of biological features containing F/BW and pH are 0.001 mg/g and 7.56. In accordance with the kinetic study, bioremediation of toluene by Fusarium Solani is done based on a first-order reaction with a 0.034 s-1 kinetic coefficient. Finally, the machine learning practices showed that the GP (R2 = 0.98) and M5P (R2 = 0.94) have the most precision for predicting Removal Percentage (RP) for mechanical and biological factors, respectively. At the end of the present research, it is found that by controlling seven possible risk factors in bioremediation operation through the FMEA- Petri Net technique, efficiency of the process can be adjusted to optimum value.

Plant growth-promoting bacteria in metal-contaminated soil: Current perspectives on remediation mechanisms

Heavy metal contamination in soils endangers humans and the biosphere by reducing agricultural yield and negatively impacting ecosystem health. In recent decades, this issue has been addressed and partially remedied through the use of “green technology,” which employs metal-tolerant plants to clean up polluted soils. Furthermore, the global climate change enhances the negative effects of climatic stressors (particularly drought, salinity, and extreme temperatures), thus reducing the growth and metal accumulation capacity of remediating plants. Plant growth-promoting bacteria (PGPB) have been widely introduced into plants to improve agricultural productivity or the efficiency of phytoremediation of metal-contaminated soils via various mechanisms, including nitrogen fixation, phosphate solubilization, phytohormone production, and biological control. The use of metal-tolerant plants, as well as PGPB inoculants, should hasten the process of moving this technology from the laboratory to the field. Hence, it is critical to understand how PGPB ameliorate environmental stress and metal toxicity while also inducing plant tolerance, as well as the mechanisms involved in such actions. This review attempts to compile the scientific evidence on this topic, with a special emphasis on the mechanism of PGPB involved in the metal bioremediation process [plant growth promotion and metal detoxification/(im)mobilization/bioaccumulation/transformation/translocation] and deciphering combined stress (metal and climatic stresses) tolerance.

Natural and anthropogenic origin of metallic contamination and health risk assessment: A hydro-geochemical study of Sehwan Sharif, Pakistan

Heavy metal contamination in groundwater is a serious threat to the environment and therefore its proper monitoring is a matter of great concern these days. In the present research, groundwater samples from Sehwan Sharif district Jamshoro, Pakistan were collected to estimate the concentration of various elements including potentially hazardous metals. Statistical analysis of the collected data based on Pearson co-relation metal clustering and Principal Component Analysis (PCA) divides the elements into three groups; Group I contains As, Cu, Ni, and Cd, Group II contains Mn, Fe, B, and Cr and Group III contains Pb and Zn. The elements Cu, Ni, As, Pb, Cd, and Zn found with higher RSD values demonstrate their anthropogenic origin whereas the lower concentration of Mn, Fe, B, and Cr indicate their natural origin (Tepanosyan et al., 2016). The histograms and box-plots of Mn, Fe, B and Cr were found normally distributed while abnormal for Cu, Ni, Pb, As, Cd and Zn. The HQs of these elements indicate their non-carcinogenic risks. However, results of individual metallic behavior indicate the highest HQ measured for B followed by HQs for Cu, and As. The toxic effects of investigated metal (loid)s calculated using HI were found to be 1.58 for adults and 1.35 for the child which is considered the medium chromic risk and cancer risk. About the toxicity of these heavy metals, their cancer risk was assessed on the levels of Cd, As, and Cr in groundwater. The carcinogenic risk of As was found to be 2.78 × 10^-4 and 1.62 × 10^-3 for child and adult, respectively. Furthermore, the values of this carcinogenic risk are 2.64 × 10^-6 and 1.54 × 10^-5 for Cd while 4.24 × 10^-3 and 2.48 × 10^-2 for Cr in child and adult, respectively. Since cancer risk exceeded the target risk of 1 × 10^-4 for As and Cr in adults and children, it can thus be considered 'non-acceptable'. The Geographic Information System (GIS) based maps were prepared using Inverse Distance Weighted (IDW) interpolation which showed the Spatial distribution of all elements throughout Sehwan Sharif from different sources of environment. Spatial maps of elements produced by ArcGIS show the hotspots of potentially hazardous elements such as the highest concentration of Pb, As, Zn, Cu, Ni, and Cd were found in urban areas of Sehwan Sharif district Jamshoro, Pakistan.

Impact of tourism activities on the distribution and pollution of soil heavy metals in natural scenic spots on the northern slope of Tianshan Mountain

Human activities can significantly impact the natural ecosystem. As an important part of terrestrial ecosystems, soil participates in energy and material cycle. With the continuous intensification of human activities, soil undergoes increasingly serious disturbance. Under the influence of global change and human activities, the variability of heavy metals in soil is worthy of further discussion. Taking Lujiaowan and Juhuatai Scenic Spot on the northern slope of Tianshan Mountain as the research area, this study investigated the concentrations of Pb, As, Zn, Cu and Mn in the soil and analyzed their distribution and pollution levels. Meanwhile, the main sources of soil heavy metals were explored using autocorrelation analysis and principal component analysis. Results showed that the order of the average concentration of heavy metals in the study area was as follows: Mn> Zn> Cu> Pb> As. None of them exceeded the national soil environmental quality level II standard, and the average concentrations of Zn, Cu, and As exceeded the background value of Xinjiang soil, reaching a light pollution level. In addition, the distribution of heavy metals in soil displayed a regular trend, and a positive correlation was found between disturbance intensity and heavy metal concentration. The geoaccumulation index also showed that the five heavy metals in the study area had lower pollution degree compared with the background value in Xinjiang. The order of potential ecological risk was As > Cu > Pb > Zn > Mn.

Factors Influencing Trace Element Levels in the Blood of Tin Smelting Workers

BACKGROUND

This study is to assess the correlation between blood concentration ranges of eight elements of tin smelting workers from Guangxi Liuzhou and their job type, working years, age, and sex.

METHODS

We collected blood samples of 218 tin smelting workers from a Chinese tin smelting factory and determined the levels of elements by inductively coupled plasma mass spectrometry.

RESULTS

Within the blood concentrations of eight metal elements of the objects, the blood concentration of copper and zinc is affected by the job type of comprehensive work; that of arsenic and mercury is affected by refining; and that of chromium, cadmium, and lead is affected by primary smelting.

CONCLUSIONS

We present the remarkable influence of four job types on the blood concentration of seven trace elements.

Synthesis of magnesium nanocomposites decked with multilayer graphene (MG) and its application for the adsorptive removal of pollutant

Fossil fuel burning is the exclusive of key causes for greenhouse fume Carbon dioxide (CO₂). Magnesium nanocomposites synthesized in combination with graphene were characterized and their performance in adsorbing CO₂ is validated. The novelty of this work is the use of magnesium oxide decked MG to capture CO₂. The magnesium nanocomposites decked with multilayer graphene (MG) were prepared using a simple combustion process. BET surface area of 1480 m²g^-1 makes it desirable for adsorbing CO₂ molecules. FTIR analysis after adsorption of CO₂ shows peak mid position at 3470.45 cm^-1, 1300-1000 cm^-1, 1603 cm^-1, and 1114.30 cm^-1 corresponding to the functional groups R-C-O, R-OH, R-COOH, -alkyne, Si-O-Si, and R-C-O-H shifted, signifying that chemisorption has taken place. The effect of many experimental parameters like adsorbent mass, period, and concentration of CO₂ was optimized during the experiments. A maximum of 92.2% of CO₂ was adsorbed at a concentration of 5 × 10^{- 4} M at the optimum contact of 70 min. During the experiment, the saturation point was attained at 70 min. Experiment results were best fitting to Langmuir adsorption isotherm; the maximum monolayer adsorption capacity of MG was 7.067 × 10^-3 mol/g/min. The kinetics of CO₂ on MG was labeled by Pseudo-second-order and R² value nearly 0.988.

Recent advances of carbon-based nanomaterials (CBNMs) for wastewater treatment: Synthesis and application

Carbon-based nanomaterials (CBNMs) have attracted significant alert due to the affluent science underpinning their implementations associated with a novel mixture of high aspect proportions, greater thermal and electrical performance, outstanding optical features, and high exterior area. CBNMs not only bear assurance in a broad range of implementations in medication, nano and microelectronics, and ecological remedies but may also be utilized in practical laboratory determinations. More specifically, CBNMs perform as an outstanding adsorbent in terminating heavy metal ions (HMI) from wastewater. There is presently a deficiency of powerful threat inspection instruments owing to their complex detection and related deficit in the health risk database. Therefore, our present review concentrates on spreading CBNMs to release pollutants from wastewater. The article wraps the effect of these contaminants and photocatalytic strategies towards treating these mixtures in wastewater, along with their restrictions and challenges, convincing resolutions, and possibilities of these approaches.

Improvement of Ecological Risk Considering Heavy Metal in Soil and Groundwater Surrounding Electroplating Factories

Heavy metals in groundwater and soil are toxic to humans. An accurate risk assessment of heavy metal contamination can aid in environmental security decision making. In this study, the improved ecological risk index (RI) is used to comprehensively investigate the influence of heavy metals in soil and groundwater within electroplating factories and their surrounding regions. In the non-overlapping area, the RI of soil and groundwater is computed individually, and in the overlapping area, the greater RI of soil and groundwater is employed. Two typical electroplating factories are used to examine the heavy metal distribution pattern. The heavy metal concentrations are compared between Factory A, which is in operation, and Factory B, which is no longer in operation, in order to analyze the heavy metal concentrations and associated ecological risks. Heavy metals continue to spread horizontally and vertically after Factory B was closed. Heavy metal concentrations in groundwater surrounding Factory B are substantially greater, and the maximum concentration exists deeper than in Factory A. Because Cr, Cu, and Hg in soil contribute significantly to the RI, the primary high RI region is observed at Factory A and the region to the southwest. The RI of Factory B demonstrates a broad, moderate risk zone in the west and southwest.

Multi-component removal of Pb(II), Cd(II), and As(V) over core-shell structured nanoscale zero-valent iron@mesoporous hydrated silica

The application of nanomaterials for the removal of heavy metals has received a great deal of attention because of their high efficiencies in the environment. But it is difficult to remove multiple heavy metals simultaneously with high efficiency and stability. Herein, the core-shell structured nanoscale zero-valent iron (nZVI) encapsulated with mesoporous hydrated silica (nZVI@mSiO₂) were prepared for efficient removal of heavy metals including Pb(II), Cd(II), and metalloid As(V). The material prepared uniformly with a high surface area (147.7 m² g^-1) has a nZVI core with the particle size of 20-60 nm and a modified dendritic mesoporous shell of 19 nm. 0.15 g L^-1 of the optimal material exhibited an extraordinary performance on removing Cd(II) and the maximum adsorption capacity for Pb(II), Cd(II), and As(V) reached 372.2 mg g^-1, 105.2 mg g^-1, and 115.2 mg g^-1 with a pH value at 5.0, respectively. The dissolved iron during the reaction showed that the mesoporous silica (mSiO₂) played an important role in enhancing the stability of nZVI. In addition, the competitive relationship between the coexistence of two heavy metals was discussed and it was found that the removal efficiency of the material for both was improved when Cd(II) and As(V) were removed synergistically.

Recent advances on botanical biosynthesis of nanoparticles for catalytic, water treatment and agricultural applications: A review

Green synthesis of nanoparticles using plant extracts minimizes the usage of toxic chemicals or energy. Here, we concentrate on the green synthesis of nanoparticles using natural compounds from plant extracts and their applications in catalysis, water treatment and agriculture. Polyphenols, flavonoid, rutin, quercetin, myricetin, kaempferol, coumarin, and gallic acid in the plant extracts engage in the reduction and stabilization of green nanoparticles. Ten types of nanoparticles involving Ag, Au, Cu, Pt, CuO, ZnO, MgO, TiO₂, Fe₃O₄, and ZrO₂ with emphasis on their formation mechanism are illuminated. We find that green nanoparticles serve as excellent, and recyclable catalysts for reduction of nitrophenols and synthesis of organic compounds with high yields of 83-100% and at least 5 recycles. Many emerging pollutants such as synthetic dyes, antibiotics, heavy metal and oils are effectively mitigated (90-100%) using green nanoparticles. In agriculture, green nanoparticles efficiently immobilize toxic compounds in soil. They are also sufficient nanopesticides to kill harmful larvae, and nanoinsecticides against dangerous vectors of pathogens. As potential nanofertilizers and nanoagrochemicals, green nanoparticles will open a revolution in green agriculture for sustainable development.

Spatial distribution and ecological risk assessment of potentially toxic metals in the Sundarbans mangrove soils of Bangladesh

At present, there are growing concerns over the increasing release of trace metals in the Sundarbans mangrove areas in Bangladesh due to nearby shipbreaking and metallurgical industries, untreated waste discharge, navigation activities, and other natural processes that deposit trace metals into soils. The current study investigated the spatial distribution, contamination level, and ecotoxicity of eight trace metals (Fe, Mn, Cu, Zn, Pb, Cd, Cr, Ni) in Sundarbans soils. Results revealed that all the trace metals except Cr were present in higher concentrations compared to Earth’s shale and/or upper continental crust. Principal component analysis and Pearson correlation showed strong positive correlations (p < 0.05) between Fe, Mn, Cu, and Zn; Ni with Mn and Cr. There were significant associations (p < 0.05) of % clay and total organic carbon (TOC) with Pb-Ni-Cr and negative correlations of pH with all the trace metals. The hierarchical cluster analysis grouped Pb, Ni, and Cd into one distinct cluster, suggesting they are derived from the same sources, possibly from anthropogenic activities. Geo accumulation index (I-geo), enrichment factor (EF), contamination factor (CF), and spatial distribution showed moderately polluted soils with Ni, Pb, and Cd (EF = 3–7.4, CF = 1–2.8, I-geo = 0–0.9) and low pollution by Zn, Cu, Fe, and Mn (EF < 3, CF < 1, I-geo < 0). The ecological risk index (RI) revealed that S-4 (RI = 114.02) and S-5 (RI = 100.04) belonged to moderate risk, and other areas posed a low risk (RI < 95). The individual contribution of Cd (25.9–73.7%), Pb (9.2–29.1%), and Ni (9.6–26.4%) to RI emphasized these metals were the foremost concern in the Sundarbans mangroves due to their long persistence time and high toxicity, even if they were present in low concentrations.

A review on magnetic sensors for monitoring of hazardous pollutants in water resources

Water resources have long been of interest to humans and have become a serious issue in all aspects of human life. The disposal of hazardous pollutants in water resources is one of the biggest global concerns and poses many risks to human health and aquatic life. Therefore, the control of hazardous pollutants in water resources plays an important role, when it comes to evaluating water quality. Due to low toxicity, good electrical conductivity, facile functionalization, and easy preparation, magnetic materials have become a good alternative in recent years to control hazardous pollutants in water resources. In the present study, the idea of using magnetic sensors in controlling and monitoring of pharmaceuticals, pesticides, heavy metals, and organic pollutants have been reviewed. The water pollutants in drinking water, groundwater, surface water, and seawater have been discussed. The toxicology of water hazardous pollutants has also been reviewed. Then, the magnetic materials were discussed as sensors for controlling and monitoring pollutants. Finally, future remarks and perspectives on magnetic nanosensors for controlling hazardous pollutants in water resources and environmental applications were explained.

A novel route to the synthesis of α-Fe2O3@C@SiO2/TiO2 nanocomposite from the metal-organic framework as a photocatalyst for water treatment

In this study, an attempt was made to synthesize metal-organic frameworks (MOFs) based magnetic iron particles as photocatalysts for textile dye wastewater. Improvement strategy was a novel two-step dry method without using conventional methods to eliminate the consumption of chemical reagents. First, the heterogeneous photocatalyst of Fe-MOFs derived magnetic carbon nanocomposite with carboxylic acid surface functional groups (Fe@C-COOH) was achieved. Next, the α-Fe₂O₃@C@SiO₂/TiO₂ was successfully synthesized followed by a sol-gel method to coat the SiO₂ shell and a solvothermal method to coat the surface of the intermediate TiO₂ particles. The as-synthesized nanocomposite materials were characterized and physicochemical analytical equipment. Further, the investigation on magnetic photocatalytic nanocomposite α-Fe₂O₃@C@SiO₂/TiO₂ performance of dye degradation and photocatalytic activity on Reactive yellow 145 (RY145), using as an indicator was conducted. The as-synthesized nanocomposite particles were characterized using X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), X-ray energy dispersive spectroscopy (EDX), and scanning electron microscopy (SEM) techniques. The structural characterization of the as-synthesized materials proved that these methods generate oxygen-containing functional groups, such as, -OH, -CO, and -COOH, which increases the polarity and hydrophilicity of the photocatalyst. The photocatalytic oxidation of RY145 dye under UVc light was discussed by the apparent first-order reaction rate and the kinetic model of the Langmuir-Hinshelwood followed a better fitting. The optimal performance of the composite is at pH = 2, 15 mg/100 mL of photocatalyst dose, 150 mg/L concentration of the dye RY145 at 25 °C temperature under UVc lamp irradiation for 90 min, and with the apparent reaction rate constant was 0.0165 min^-1. The thermodynamic analysis of activation parameters computed by the Eyring model and based on transition state theory (TST), an endothermic reaction with a positive value for Δ^‡H^o (50.16 kJ mol^-1) and a negative value for Δ^‡S^o (-153 J/mol K) both contribute toward achieving positive values for Δ^‡G^o and a nonspontaneous process. The proposed α-Fe₂O₃@C@SiO₂/TiO₂ demonstrated a high capability of photocatalytic degradation up to 97% after five successive cycles at the optimal condition compared to that of Fe₃O₄@C (18.74%) and Fe@C-COOH (77.9%) without reusability.

Enhanced delivery of amendments in fractured clay sites based on multi-point injection: An analytical study

Fracturing technology that can enhance the delivery of amendments has attracted attention in the remediation of low-permeability contaminated sites. However, there are few works on the enhanced delivery of amendments based on multi-point injection in a fracture-matrix system. This study develops a two-dimensional analytical model for enhanced delivery of amendments in a finite-domain low-permeability matrix through multi-point injection in a natural, hydraulic or pneumatic fracture. The mechanisms of advection, diffusion, dispersion, sorption and degradation are considered in the model and any injection form (e.g., pulse injection, periodic injection or slow-release injection) can be embedded to obtain a specified solution. Then, a new linear factor R*, which is the ratio of the peak concentration to the trough concentration on the same plane, is introduced to evaluate the concentration fluctuation in the fracture and matrix. Results show that with a stronger line source formed in the fracture right after injection (corresponding to a small R*), the concentration distribution of amendments in the matrix is more uniform at each depth resulting in a smaller residual rate, i.e., (R*-1) × 100%. If the injection wells have been installed unreasonably (e.g., a too large spacing), the continuous injection time is an effective controllable parameter to compensate for this defect. Moreover, a controlled slow-release system can maintain a more stable concentration distribution in the fracture than continuous injection and periodic injection systems, giving a longer residence time. Overall, this work is expected to provide some interesting guidelines for the design of multi-point injection in the fracturing low-permeability sites to enhance the remediation of contaminated soil.

Preconcentrations of Cu (II) and Mn (II) by magnetic solid-phase extraction on Bacillus cereus loaded γ-Fe2O3 nanomaterials

For the simultaneous preconcentrations of Cu(II) and Mn(II), a novel preconcentration technique was developed and described. Bacillus cereus loaded magnetic ɣ-Fe₂O₃ nanoparticles were prepared and used as support materials on solid-phase extraction procedure. Important experimental parameters were investigated in details and pH 6.0, 3 mL min^-1 of flow rate, 5 mL of 1 mol L^-1 of HCl as eluent, 200 mg of biomass, and 200 mg of magnetic ɣ-Fe₂O₃ nanoparticles as support material was found as the best conditions. The preconcentrations factor were found to be 80 for Cu (II) and Mn(II). It was confirmed by the results that SPE columns could be used in 32 cycles. The LOD values calculated for Cu (II) and Mn (II) were 0.09 and 0.08 ng mL^-1, respectively. The RSD values found were less than 3.4%. The extraction recoveries were achieved as higher than 98%. The biosorption capacities of Cu (II), and Mn (II) were 26.0 mg g^-1, 30.3 mg g^-1 respectively. The approach devised for analyzing analyte concentrations in food samples proved to be successful.

Plant extract-based green fabrication of nickel ferrite (NiFe2O4) nanoparticles: An operative platform for non-enzymatic determination of pentachlorophenol

Environmental pollution has become a major human concern with the extensive exploitation of pesticides. Pentachlorophenol (PCP) is the most hazardous of all chlorophenols which are being used as pesticide, fungicide, and wood preservative. Thus, the fabrication of ultrasensitive electrochemical methods for the determination of pesticides is of great significance. In the present experiment, a simple, green, and sensitive electrochemical sensor was constructed for the determination of PCP by using a chemically modified nickel ferrite glassy carbon electrode (NiFe₂O₄/GCE). The fabricated nanoparticles were primarily characterized by several analytical tools to confirm the functionalities, surface texture, crystallinity, and elemental composition. For the investigation of conductive nature, the proposed NiFe₂O₄/GCE was exploited to the primary electrochemical characterization tools e.g. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The ultra-sensitive determination of PCP was carried out under the linear dynamic range from 0.01 to 90 μM at the pulse amplitude of 80 mV/s in BRB buffer pH of 4. The limit of detection of the developed methods for PCP was calculated to be 0.0016 μM. The analytical applicability of the fabricated sensor was tested in different water samples depicting the acceptable recovery values.

Preparation of a surface modified fly ash-based geopolymer for removal of an anionic dye: Parameters and adsorption mechanism

Geopolymers have been recently studied as environmentally friendly and low-cost adsorbents especially for the removal of cationic species in wastewater treatment mainly because of their negative surface charge at spontaneous pH conditions. Although there are very few recent studies conducted with different geopolymer composites on anionic dyes, high cost, difficulty of the composite preparation and most importantly the necessity of very low pH values limit their usage. Hence, in this study, a simple and low-cost surface modification with CTAB was applied to a previously prepared fly ash-based geopolymer (GEO) for the removal of anionic Acid Blue 185 (AB185) without the need of strongly acidic conditions. Within this scope, the effects of CTAB dosage (1-5% by weight of GEO), adsorbent dosage (0.5-3.0 g L^-1) and initial dye concentration (10-50 mg L^-1) were studied as a function of retention time (5-300 min). For 40 min, the removal efficiency of AB185 substantially increased from 0.29 up to 79.36% for the respective GEO and its modified product with 4% CTAB (MGEO4). The efficiency increased with the adsorbent (MGEO4) dosage of up to 2.0 g L^-1 at which 89.20% was obtained for 300 min. However, a little decrease was observed down to 81.10% for 3.0 g L^-1. The efficiency values of 98.19 and 89.20% were obtained for the initial AB185 concentrations of 10 and 50 mg L^-1, respectively. The Langmuir-Hinshelwood kinetic model is highly correlated with the experimental results. The high adsorption capacity attained in a very short time suggests that the main mechanism is based on physical adsorption via the electrostatic attraction between MGEO4 and AB185. Overall results have indicated that the CTAB-modified fly ash-based geopolymer can be effectively used for the adsorption of AB185.

Plants-Microorganisms-Based Bioremediation for Heavy Metal Cleanup: Recent Developments, Phytoremediation Techniques, Regulation Mechanisms, and Molecular Responses

Rapid industrialization, mine tailings runoff, and agricultural activities are often detrimental to soil health and can distribute hazardous metal(loid)s into the soil environment, with harmful effects on human and ecosystem health. Plants and their associated microbes can be deployed to clean up and prevent environmental pollution. This green technology has emerged as one of the most attractive and acceptable practices for using natural processes to break down organic contaminants or accumulate and stabilize metal pollutants by acting as filters or traps. This review explores the interactions between plants, their associated microbiomes, and the environment, and discusses how they shape the assembly of plant-associated microbial communities and modulate metal(loid)s remediation. Here, we also overview microbe-heavy-metal(loid)s interactions and discuss microbial bioremediation and plants with advanced phytoremediation properties approaches that have been successfully used, as well as their associated biological processes. We conclude by providing insights into the underlying remediation strategies' mechanisms, key challenges, and future directions for the remediation of metal(loid)s-polluted agricultural soils with environmentally friendly techniques.

Pomegranate Punica granatum peel waste as a naked-eye natural colorimetric sensor for the detection and determination of Fe+3 and I- ions in water

The utilization of renewable and abundant agricultural waste such as Pomegranate (Punica granatum L.) peel extract has been developed wherein a simple extraction of dried peel in water offered a natural sensor; ensuing yellowish solution comprising phenolic compounds reacted explicitly to detect Fe⁺³ and I^- solutions by naked-eye. The UV-Vis absorption spectrum of the resulting extracted mixture was drastically changed toward the longer wavelengths only after the addition of the Fe³⁺ and I^- while there was no discernible spectral change due to the addition of a broad range of other common cations and anions. In the case of Fe³⁺ and I^-, the transformation can be followed by the naked eye in the concentration range of 5 × 10^-4 M and 1 × 10^-2 M, respectively. An acceptable and reasonable detection with 47.05426 μM efficiency was attained in comparison to other Fe³⁺ indicators such as ferroin.

Effects of Modified Biochar on the Mobility and Speciation Distribution of Cadmium in Contaminated Soil

Cadmium-contaminated soil poses a threat to the environment and human health. Biochar materials have received widespread attention as an in situ immobilizer for the efficient remediation of heavy-metal-contaminated soils. In this study, a modified biochar material (E–CBC) was developed for the immobilization of Cd in contaminated soil. E–CBC was characterized by XPS, SEM, BET, and FTIR. The effects of pristine biochar (BC) and E–CBC on soil physicochemical properties (pH and soil organic matter (SOM)), CaCl2-extractable Cd, total characteristics leaching procedure (TCLP) Cd, and speciation distribution of Cd were studied by incubation experiments. The results showed that the application of BC and E–CBC increased soil pH slightly and SOM significantly. A 2% dosage BC and E–CBC treatment reduced CaCl2-extractable Cd by 14.62% and 91.79%, and reduced TCLP Cd by 9.81% and 99.8%, respectively. E–CBC was shown to effectively induce the transition of Cd in the soil to a stable state. The application of a 0.25% dosage of E–CBC reduced the acid-extractable fraction of Cd from 58.06% to 10.66%. The functional groups increased after modification and may play an important role in the immobilization of Cd in the contaminated soil. In conclusion, E–CBC is a promising in situ immobilizer for the remediation of Cd-contaminated soil.

A review of boron removal from aqueous solution using carbon-based materials: An assessment of health risks

Carbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon-based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evaluated, as well as any shortcomings, future perspectives, and gaps in the literature.