Microbial and Enzymatic Degradation of Synthetic Plastics

Microbial engineering strategies for synthetic microplastics clean up: A review on recent approaches

Microplastics are the small fragments of the plastic molecules which find their applications in various routine products such as beauty products. Later, it was realized that it has several toxic effects on marine and terrestrial organisms. This review is an approach in understanding the microplastics, their origin, dispersal in the aquatic system, their biodegradation and factors affecting biodegradation. In addition, the paper discusses the major engineering approaches applied in microbial biotechnology. Specifically, it reviews microbial genetic engineering, such as PET-ase engineering, MHET-ase engineering, and immobilization approaches. Moreover, the major challenges associated with the plastic removal are presented by evaluating the recent reports available.

Exploitation of bacterial strains for microplastics (LDPE) biodegradation

Plastic waste (microplastics) is one of the primary sources of environmental pollutants, serving as a reservoir for them. In this study, previously isolated and screened polymer-degrading bacteria (B. subtilis V8, P. aminophilusB1 4-, P. putida C 2 5, P. aeruginosa V1, and A. calcoaceticus V4) were utilised to examine the biodegradation of LDPE (low-density polyethylene) microplastics. Response surface methodology (RSM) was used to optimize the physicochemical growth parameters (pH, temperature, and ammonium sulphate concentration). By using the polyphasic approach, including CO₂ estimation, weight loss analysis, scanning electron microscopy (SEM), fourier transform infrared (FT-IR) spectroscopy, and electrical conductivities examine the plastic biodegradability. After four months, all biodegradable plastic samples were evaluated. When compared to the other tested cultures, P. aeruginosa V1 showed the most significant degradation (CO₂evolution of 8.86 g.l^-l and percentage weight loss of 18.21 %) with increased electrical conductivity, followed by B. subtilis V8 (CO₂ evolution of 8.10 g.l^-l and percentage weight loss of 16.12 %), A. calcoaceticus V4 (CO₂ evolution of 7.21 g.l^-l and percentage weight loss of 15.44 %), P. putida C 2-5 (CO₂ evolution of 5.76 g.l^-l and percentage weight loss of 13.30 %), and P. aminophilus B1 4- (CO₂ evolution of 5.62 g.l^-l and percentage weight loss of 11.72 %). The deteriorated materials' exterior modifications (surface alteration) were also examined using SEM analysis, and the chemical bonding alterations (bond vibration-bending) were determined using FT-IR spectroscopy.

Prevalence and implications of microplastics in potable water system: An update

Synthetic plastics, which are lightweight, durable, elastic, mouldable, cheap, and hydrophobic, were originally invented for human convenience. However, their non-biodegradability and continuous accumulation at an alarming rate as well as subsequent conversion into micro/nano plastic scale structures via mechanical and physio-chemical degradation pose significant threats to living beings, organisms, and the environment. Various minuscule forms of plastics detected in water, soil, and air are making their passage into living cells. High temperature and ambient humidity increase the degradation potential of plastic polymers photo-catalytically under sunlight or UV-B radiations. Microplastics (MPs) of polyethylene terephthalate, polyethylene, polystyrene, polypropylene, and polyvinyl chloride have been detected in bottled water. These microplastics are entering into the food chain cycle, causing serious harm to all living organisms. MPs entering into the food chain are usually inert in nature, possessing different sizes and shapes. Once they enter a cell or tissue, it causes mechanical damage, induces inflammation, disturbs metabolism, and even lead to necrosis. Various generation routes, types, impacts, identification, and treatment of microplastics entering the water bodies and getting associated with various pollutants are discussed in this review. It emphasizes potential detection techniques like pyrolysis, gas chromatography-mass spectrometry (GC-MS), micro-Raman spectroscopy, and fourier transform infrared spectroscopy (FT IR) spectroscopy for microplastics from water samples.

Why have we not yet solved the challenge of plastic degradation by biological means?

The invention of fossil fuel-derived plastics changed and reshaped society for the better; however, their mass production has created an unprecedented accumulation of waste and an environmental crisis. Scientists are searching for better ways to reduce plastic waste than the current methods of mechanical recycling and incineration, which are only partial solutions. Biological means of breaking down plastics have been investigated as alternatives, with studies mostly focusing on using microorganisms to biologically degrade sturdy plastics like polyethylene (PE). Unfortunately, after a few decades of research, biodegradation by microorganisms has not provided the hoped-for results. Recent studies suggest that insects could provide a new avenue for investigation into biotechnological tools, with the discovery of enzymes that can oxidize untreated PE. But how can insects provide a solution that could potentially make a difference? And how can biotechnology revolutionize the plastic industry to stop ongoing/increasing contamination?

Biological effects on the migration and transformation of microplastics in the marine environment

Microplastics(MPs) are ubiquitous, difficult to degrade, and potentially threatening to organisms in marine environment, so it is important to clarify the factors that affect their biogeochemical processes. The impact of biological activities on the MPs in marine environment is ubiquitous and complex, and there is currently a lack of systematic summaries. This paper reviews the effects of biological actions on the migration, distribution and degradation of MPs in marine environment from four aspects: biological ingestion and digestion, biological movement, biological colonization and biological adhesion. MPs in seawater and sediments can be closely combined with organisms through three pathways: biological ingestion, biofilm formation or adhesion to organisms, and are passed between species at different trophic levels through the food chain. The generation and degradation of faecal pellets and biofilms can alter the density of "environmental MPs", thereby affecting their vertical migration and deposition in water bodies. The movement of swimming organisms and the disturbance by benthic organisms can promote the migration of MPs in water and vertical migration and resuspension in sediments, thereby changing the distribution of MPs in local sea areas. The grinding effect of the digestive tract and the secretion of chemicals from the biofilm (such as enzymes and acids) can reduce the particle size and increase surface roughness of MPs, or even degrade them completely. Besides, biological adhesion may be an important mechanism affecting the distribution, migration and preservation of MPs. There may be complex interactions and linkages among marine dynamical processes, photochemical degradation and biological processes that collectively affect the biogeochemical processes of MPs, but their relative contributions remain to be more studied.

Understanding challenges associated with plastic and bacterial approach toward plastic degradation

Plastic is widely used in every sector due to its stability, durability, and low cost. The widespread use of plastic results in the compilation of plastic waste in the environment. The buildup of such a vast volume of plastic garbage has emerged as the primary cause of environmental pollution, including air, land, and water pollution. Plastics contain various harmful chemicals and toxic substances that can leak and adversely affect humans and other organisms. Managing this much plastic waste is a very challenging task; therefore, an appropriate technique is needed to address this problem. Various methods are used, such as chemical, physical, and biological, to degrade plastic waste. Bacterial degradation is known to be the most effective technique for the biodegradation approach to overcome this issue. Biodegradation has played a crucial role in removing these polluting wastes more efficiently and eco-friendly. The process of biodegradation involves a variety of bacteria, such as Acinetobacter baumannii, Bacillus weihenstephanensis, Pseudomonas aeruginosa, Pseudomonas fluorescens, Rhodococcus ruber, and so on. Biodegradation of plastic takes place through various biochemical pathways, including biodeterioration, biofragmentation, assimilation, and mineralization. During biodegradation, bacteria produce enzymes like esterase, cutinase, laccase, lipase, and others that break down and transform plastic polymers into microbial biomass and gases. This review aims to explain how bacteria contribute to the breakdown of plastic.

Biodegradable polymers – research and applications

The major concern in ecology we are facing in this era of modernization is environmental pollution due to non-biodegradable plastics. Because of its low cost, readily available nature, light weight, corrosion resistance, and added additives, it is adaptable and suitable for a wide range of applications. But the problem is that most of the petroleum-based plastics are not recyclable. Recycling and degradation of plastics are time-consuming and also release harmful chemicals, which pose a great threat to the environment. It is the need of the modern era to focus on the production of biodegradable and eco-friendly polymers as alternatives to these plastics. Nowadays, plant-based polymers are coming onto the market, which are easily degraded into soil with the help of microorganisms. However, commercialization is less due to its high production costs and the requirement for large agricultural lands for production, and their degradation also necessitated the use of special composting techniques. It is urgently needed to produce good quality and a high quantity of biodegradable polymers. The microorganisms are often searched for and screened from the carbon-rich and nutrient-deficient environment, but the commercial value of the polymers from microorganisms is very costly. Moreover, the currently explored microbes like Ralstonia eutropha, Aspergillus eutrophus, Cupriavidus necator, etc. are producing polymers naturally as a carbon reserve. But the quality as well as quantity of production are low, which means they cannot meet our requirements. So, the main aim of this chapter is to focus on the wide applications of different biodegradable polymers from plants, animals and even microbes and recent advancements in their production and improvement of biopolymers to increase their quality and quantity from natural sources, as well as their applications in packaging, the medical field, aquaculture, and other various fields for the commercialization of the product.

Polymeric Heart Valves Will Displace Mechanical and Tissue Heart Valves: A New Era for the Medical Devices

The development of a novel artificial heart valve with outstanding durability and safety has remained a challenge since the first mechanical heart valve entered the market 65 years ago. Recent progress in high-molecular compounds opened new horizons in overcoming major drawbacks of mechanical and tissue heart valves (dysfunction and failure, tissue degradation, calcification, high immunogenic potential, and high risk of thrombosis), providing new insights into the development of an ideal artificial heart valve. Polymeric heart valves can best mimic the tissue-level mechanical behavior of the native valves. This review summarizes the evolution of polymeric heart valves and the state-of-the-art approaches to their development, fabrication, and manufacturing. The review discusses the biocompatibility and durability testing of previously investigated polymeric materials and presents the most recent developments, including the first human clinical trials of LifePolymer. New promising functional polymers, nanocomposite biomaterials, and valve designs are discussed in terms of their potential application in the development of an ideal polymeric heart valve. The superiority and inferiority of nanocomposite and hybrid materials to non-modified polymers are reported. The review proposes several concepts potentially suitable to address the above-mentioned challenges arising in the R&D of polymeric heart valves from the properties, structure, and surface of polymeric materials. Additive manufacturing, nanotechnology, anisotropy control, machine learning, and advanced modeling tools have given the green light to set new directions for polymeric heart valves.

Potential of Advanced Oxidation as Pretreatment for Microplastics Biodegradation

In the last two decades, microplastics (MP) have been identified as an emerging environmental pollutant. Due to their small size, MP particles may easily enter the food chain, where they can have adverse effects on organisms and the environment in general. The common methods for the removal of pollutants from the environment are not fully effective in the elimination of MP; thus, it is necessary to find a more suitable treatment method(s). Among the various approaches tested, biodegradation is by far the most environmentally friendly and economically acceptable remediation approach. However, it has serious drawbacks, generally related to the rather low removal rate and often insufficient efficiency. Therefore, it would be beneficial to use some of the less economical but more efficient methods as pretreatment prior to biodegradation. Such pretreatment would primarily serve to increase the roughness and hydrophilicity of the surface of MP, making it more susceptible to bioassimilation. This review focuses on advanced oxidation processes (AOPs) as treatment methods that can enhance the biodegradation of MP particles. It considers MP particles of the six most commonly used plastic polymers, namely: polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyethylene terephthalate and polyurethane. The review highlights organisms with a high potential for biodegradation of selected MP particles and presents the potential benefits that AOP pretreatment can provide for MP biodegradation.

Microbial Enzyme Biotechnology to Reach Plastic Waste Circularity: Current Status, Problems and Perspectives

The accumulation of synthetic plastic waste in the environment has become a global concern. Microbial enzymes (purified or as whole-cell biocatalysts) represent emerging biotechnological tools for waste circularity; they can depolymerize materials into reusable building blocks, but their contribution must be considered within the context of present waste management practices. This review reports on the prospective of biotechnological tools for plastic bio-recycling within the framework of plastic waste management in Europe. Available biotechnology tools can support polyethylene terephthalate (PET) recycling. However, PET represents only ≈7% of unrecycled plastic waste. Polyurethanes, the principal unrecycled waste fraction, together with other thermosets and more recalcitrant thermoplastics (e.g., polyolefins) are the next plausible target for enzyme-based depolymerization, even if this process is currently effective only on ideal polyester-based polymers. To extend the contribution of biotechnology to plastic circularity, optimization of collection and sorting systems should be considered to feed chemoenzymatic technologies for the treatment of more recalcitrant and mixed polymers. In addition, new bio-based technologies with a lower environmental impact in comparison with the present approaches should be developed to depolymerize (available or new) plastic materials, that should be designed for the required durability and for being susceptible to the action of enzymes.

The Road to Sustainable Tire Materials: Current State-of-the-Art and Future Prospectives

The development of a 100% sustainable tire has emerged as a milestone for several tire companies across the globe. It has created new commercial opportunities for the biobased, renewable, and recycled polymer materials. However, there are concerns that the incorporation of such sustainable new materials may have an undesirable impact on the main performance properties of the tire. At the same time, with new capabilities and product innovations, it can help us meet society's need in a more sustainable fashion and protect the environment. This Feature first outlines the opportunities and need for sustainable tire materials. Next, it describes the main types of sustainable material attributes in tire material, elastomers, reinforcing agents, fibers, and plasticizers, among a few others. The challenges to achieving the performance properties are discussed with possible design guidelines. Recent approaches to the tire attributes are described in the form of a meticulous overview of the existing literature, with a critical analysis of some of them. This contribution attempts to highlight, in a comprehensive way, sustainable tire materials on the basis of recent research advancements, existing challenges, and prospective future scope in this field.

Killing two birds with one stone: chemical and biological upcycling of polyethylene terephthalate plastics into food

Most polyethylene terephthalate (PET) plastic waste is landfilled or pollutes the environment. Additionally, global food production must increase to support the growing population. This article explores the feasibility of using microorganisms in an industrial system that upcycles PET into edible microbial protein powder to solve both problems simultaneously. Many microorganisms can utilize plastics as feedstock, and the resultant microbial biomass contains fats, nutrients, and proteins similar to those found in human diets. While microbial degradation of PET is promising, biological PET depolymerization is too slow to resolve the global plastic crisis and projected food shortages. Evidence reviewed here suggests that by coupling chemical depolymerization and biological degradation of PET, and using cooperative microbial communities, microbes can efficiently convert PET waste into food.

Ecological insights into the resilience of marine plastisphere throughout a storm disturbance

Among numerous research about marine plastisphere, the community living on the surface of plastic debris, little attention was given to the ecological mechanisms governing prokaryotes compared to eukaryotes, and even less focused on their resilience in a changing climate with more storm prevalence. Our current research recruited an integrated approach involving community succession across temporal dimension, ecological mechanisms that govern the assembly, and resilience to environmental perturbations to highlight the ecology of different kingdoms in the plastisphere. Towards this goal, we examined the succession of the prokaryotic and eukaryotic communities on artificial plastic nets in a sidestream of seawater from the Gulf of Aqaba over 35 days. A robust local storm enabled investigation of the alterations before, during, and after this disturbance, aiming at the community's potential to recover. Data from 16S and 18S rRNA sequencing and microscopic analyses decrypted the plastisphere diversity, community assembly, and stochasticity, followed by further analyses of functional and co-occurrence networks for the prokaryotic group. Prokaryotic and eukaryotic communities underwent exact opposite ecological mechanisms. While determinism driven by a robust environmental selection dictated the prokaryotic community assembly, stochasticity prevailed when this condition was relaxed. Interestingly, resilience against disturbance was observed in prokaryotes but not in eukaryotes. The decrease in compositional, functional diversity and network complexity in the prokaryotic community was reversed, presumably due to the niche specification process and high dispersal. Niche specification following perturbation was evident in some bacteria by selected functions associated with plastic degradation, stress response, and antibiotic resistance. On the contrary, eukaryotes decreased in diversity and were dominated by the commonly found Chlorophyta towards the later successional period. Novel findings on the ecology of marine plastisphere during perturbation encourage the integration of this aspect into prediction research.

Microbial assemblage for solid waste bioremediation and valorization with an essence of bioengineering

Environmental solid waste bioremediation is a method of treating contaminated solid waste that involves changing ecological conditions to foster the growth of a broad spectrum of microorganisms and the destruction of the target contaminants. A wide range of microorganisms creates metabolites that may break down and change solid waste-based pollution to various value-added molecules. Diverse bioremediation technologies, their limitations, and the procedure involve recycling solid waste materials from the environment. The existing environmental solid waste disposal services are insufficient and must be upgraded with more lucrative recovery, recycling, and reuse technologies to decrease the enormous expenditures in treatment procedures. Bioremediation of solid waste eliminates the toxic components. It restores the site with the advent of potential microbial communities towards solid waste valorization utilizing agriculture solid waste, organic food waste, plastic solid waste, and multiple industrial solid wastes.Bioengineering on diverse ranges of microbial regimes has accelerated to provide extra momentum toward solid waste recycling and valorization. This approach increases the activity of bioremediating microbes in the commercial development of waste treatment techniques and increases the cost-effective valuable product generation. This framework facilitates collaboration between solid waste and utilities. It can aid in establishing a long-term management strategy for recycling development with the advent of a broad spectrum of potential microbial assemblages, increasing solid waste contamination tolerance efficiency and solid waste degradability. The current literature survey extensively summarises solid waste remediation valorization using a broad spectrum of microbial assemblages with special emphasis on bioengineering-based acceleration. This approach is to attain sustainable environmental management and value-added biomolecule generation.

Microplastics in wastewater treatment plants: Sources, properties, removal efficiency, removal mechanisms, and interactions with pollutants

Since wastewater treatment plants (WWTPs) cannot completely remove microplastics (MPs) from wastewater, WWTPs are responsible for the release of millions of MPs into the environment even in 1 day. Therefore, knowing the sources, properties, removal efficiencies and removal mechanisms of MPs in WWTPs is of great importance for the management of MPs. In this paper, firstly the sources of MPs in WWTPs and the quantities and properties (polymer type, shape, size, and color) of MPs in influents, effluents, and sludges of WWTPs are presented. Following this, the MP removal efficiency of different treatment units (primary settling, flotation, biological treatment, secondary settling, filtration-based treatment technologies, and coagulation) in WWTPs is discussed. In the next section, details about MP removal mechanisms in critical treatment units (settling and flotation tanks, bioreactors, sand filters, membrane filters, and coagulation units) in WWTPs are given. In the last section, the mechanisms and factors that are effective in adsorbing organic-inorganic pollutants in wastewater to MPs are presented. Finally, the current situation and research gap in these areas are identified and suggestions are provided for topics that need further research in the future.

Biodegradation of Different Types of Bioplastics through Composting—A Recent Trend in Green Recycling

In recent years, the adoption of sustainable alternatives has become a powerful tool for replacing petroleum-based polymers. As a biodegradable alternative to petroleum-derived plastics, bioplastics are becoming more and more prevalent and have the potential to make a significant contribution to reducing plastic pollution in the environment. Meanwhile, their biodegradation is highly dependent on their environment. The leakage of bioplastics into the environment and their long degradation time frame during waste management processes are becoming major concerns that need further investigation. This review highlights the extent and rate of the biodegradation of bioplastic in composting, soil, and aquatic environments, and examines the biological and environmental factors involved in the process. Furthermore, the review highlights the need for further research on the long-term fate of bioplastics in natural and industrial environments. The roles played by enzymes as biocatalysts and metal compounds as catalysts through composting can help to achieve a sustainable approach to the biodegradation of biopolymers. The knowledge gained in this study will also contribute to the development of policies and assessments for bioplastic waste, as well as provide direction for future bioplastics research and development.

Bio-Polypropylene and Polypropylene-based Biocomposites: Solutions for a Sustainable Future

Polypropylene (PP) is among the most widely used commodity plastics in our everyday life due to its low cost, lightweight, easy processability, and exceptional chemical, thermo-mechanical characteristics. The growing awareness on energy and environmental crisis has driven global efforts for creating a circular economy via developing sustainable and eco-friendly alternatives to traditional plastics produced from fossil fuels for a variety of end-use applications. This review paper presents a brief outline of the emerging bio-based PP derived from renewable natural resources, covering its production routes, market analysis and potential utilizations. This contribution also provides a comprehensive review of the PP-based biocomposites produced with diverse green fillers generated from agro-industrial wastes, with particular emphasis on the structural modification, processing techniques, mechanical properties, and practical applications. Furthermore, given that the majority of PP products are currently destined for landfills, research progress on enhancing the degradation of PP and its biocomposites is also presented in light of the environmental concerns. Finally, a brief conclusion with discussions on challenges and future perspectives are provided.

Structural breakdown and phytotoxic assessments of PE degradation through acid hydrolysis, starch addition and Pseudomonas aeruginosa bioremediation

Vast amounts of plastic waste are causing serious environmental issues and urge to develop of new remediation methods. The aim of the study is to determine the role of inorganic (nitric acid), organic (starch addition), and biological (Pseudomonas aeruginosa) soil amendments on the degradation of Polyethylene (PE) and phytotoxic assessment for the growth of lettuce plant. The PE-degrading bacteria were isolated from the plastic-contaminated soil. The strain was identified as Pseudomonas aeruginosa (OP007126) and showed the highest degradation percentage for PE. PE was pre-treated with nitric acid as well as starch and incubated in the soil, whereas P. aeruginosa was also inoculated in PE-contaminated soils. Different combinations were also tested. FTIR analysis and weight reduction showed that though nitric acid was efficient in degradation, the combined application of starch and bacteria also showed effective degradation of PE. Phytotoxicity was assessed using morphological, physiological, and biochemical parameters of plant. Untreated PE significantly affected plants' physiology, resulting in a 45% reduction in leaf chlorophyll and a 40% reduction in relative water content. It also had adverse effects on the biochemical parameters of lettuce. Bacterial inoculation and starch treatment mitigated the harmful impact of stress and improved plants' growth as well as physiological and biochemical parameters; however, the nitric treatment proved phytotoxic. The observed results revealed that bacteria and starch could be effectively used for the degradation of pre-treated PE.

Discovering untapped microbial communities through metagenomics for microplastic remediation: recent advances, challenges, and way forward

Microplastics (MPs) are ubiquitous pollutants persisting almost everywhere in the environment. With the increase in anthropogenic activities, MP accumulation is increasing enormously in aquatic, marine, and terrestrial ecosystems. Owing to the slow degradation of plastics, MPs show an increased biomagnification probability of persistent, bioaccumulative, and toxic substances thereby creating a threat to environmental biota. Thus, remediation of MP-pollutants requires efficient strategies to circumvent the mobilization of contaminants leaching into the water, soil, and ultimately to human beings. Over the years, several microorganisms have been characterized by the potential to degrade different plastic polymers through enzymatic actions. Metagenomics (MGs) is an effective way to discover novel microbial communities and access their functional genetics for the exploration and characterization of plastic-degrading microbial consortia and enzymes. MGs in combination with metatranscriptomics and metabolomics approaches are a powerful tool to identify and select remediation-efficient microbes in situ. Advancement in bioinformatics and sequencing tools allows rapid screening, mining, and prediction of genes that are capable of polymer degradation. This review comprehensively summarizes the growing threat of microplastics around the world and highlights the role of MGs and computational biology in building effective response strategies for MP remediation.

Accelerated Polyethylene Terephthalate (PET) Enzymatic Degradation by Room Temperature Alkali Pre-treatment for Reduced Polymer Crystallinity

Polyethylene terephthalate (PET) is the most widely employed plastic for single-use applications. The use of enzymes isolated from microorganisms, such as PETase with the capacity to hydrolyze PET into its monomers, represents a promising method for its sustainable recycling. However, the accessibility of the enzyme to the hydrolysable bonds is an important challenge that needs to be addressed for effective biodegradation of postconsumer PET. Here, we combined an alkali pre-treatment (25 °C) with PETase incubation (30 °C) with post-consumed PET bottles. The pre-treatment modifies the surface of the plastic and decreases its crystallinity enabling the access of the enzyme to the hydrolysable chemical bonds. When the alkali pre-treatment is incorporated into the enzymatic process the degradation yields increase more than one order of magnitude reaching values comparable to those obtained during heating/cooling cycles. Our results show energetic advantages over other reported pre-treatments and open new avenues for sustainable PET recycling.

Plasma degradation of contaminated PPE: an energy-efficient method to treat contaminated plastic waste

The use of PPE has drastically increased because of the SARS-CoV-2 (COVID-19) pandemic as disposable surgical face masks made from non-biodegradable polypropylene (PP) polymers have generated a significant amount of waste. In this work, a low-power plasma method has been used to degrade surgical masks. Several analytical techniques (gravimetric analysis, scanning electron microscopy (SEM), attenuated total reflection-infra-red spectroscopy (ATR-IR), x-ray photoelectron spectroscopy (XPS), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC) and wide-angle x-ray scattering (WAXS)) were used to evaluate the effects of plasma irradiation on mask samples. After 4 h of irradiation, an overall mass loss of 63 ± 8%, through oxidation followed by fragmentation, was observed on the non-woven 3-ply surgical mask, which is 20 times faster than degrading a bulk PP sample. Individual components of the mask also showed different degradation rates. Air plasma clearly represents an energy-efficient tool for treating contaminated PPE in an environmentally friendly approach.

In vivo degradation of polyethylene terephthalate using microbial isolates from plastic polluted environment

Accumulation of plastics alarms a risk to the environment worldwide. As polyethylene pterephthalate (PET) degrades slowly and produces hazardous substances, therefore, it is now essential to eliminate plastic wastes from the environment. Given that, the current study is concerned with PET degradation potential of naturally occurring microbial strains isolated from plastic waste dumping sites, Sarcina aurantiaca (TB3), Bacillus subtilis (TB8), Aspergillus flavus (STF1), Aspergillus niger (STF2). To test the biodegradability of PET films, the films were incubated for 60 days at 37 °C with the microorganisms designated as TB3, TB8, STF1, STF2 and the microbial consortium (TB3+TB8+STF1+STF2) in Minimal Salt Medium and Bushnell Hass Broth. Hydrophobicity, viability, and total protein content of isolates were investigated. Using Field Emission Scanning Electron Microscopy and Fourier Transform Infrared Spectrophotometry to measure variations in functional groups and carbonyl index on PET surface, biodegradation process was affirmed by fissures and modified surfaces. Results revealed that the microbial consortium (S. aurantiaca + B. subtilis + A. flavus + A. niger) that the weight loss of PET films was 28.78%. The microbial consortium could be used to treat PET waste, posing no health or environmental risks. The developed microbial consortium has the potential to degrade PET, hence can be employed for eliminating PET in plastic contaminated sites.

A stable isotope assay with 13C-labeled polyethylene to investigate plastic mineralization mediated by Rhodococcus ruber

Methods that unambiguously prove microbial plastic degradation and allow for quantification of degradation rates are necessary to constrain the influence of microbial degradation on the marine plastic budget. We developed an assay based on stable isotope tracer techniques to determine microbial plastic mineralization rates in liquid medium on a lab scale. For the experiments, ¹³C-labeled polyethylene (¹³C-PE) particles (irradiated with UV-light to mimic exposure of floating plastic to sunlight) were incubated in liquid medium with Rhodococcus ruber as a model organism for proof of principle. The transfer of ¹³C from ¹³C-PE into the gaseous and dissolved CO₂ pools translated to microbially mediated mineralization rates of up to 1.2 % yr^-1 of the added PE. After incubation, we also found highly ¹³C-enriched membrane fatty acids of R. ruber including compounds involved in cellular stress responses. We demonstrated that isotope tracer techniques are a valuable tool to detect and quantify microbial plastic degradation.

Toward Sustainable Wearable Electronic Textiles

Smart wearable electronic textiles (e-textiles) that can detect and differentiate multiple stimuli, while also collecting and storing the diverse array of data signals using highly innovative, multifunctional, and intelligent garments, are of great value for personalized healthcare applications. However, material performance and sustainability, complicated and difficult e-textile fabrication methods, and their limited end-of-life processability are major challenges to wide adoption of e-textiles. In this review, we explore the potential for sustainable materials, manufacturing techniques, and their end-of-the-life processes for developing eco-friendly e-textiles. In addition, we survey the current state-of-the-art for sustainable fibers and electronic materials (i.e., conductors, semiconductors, and dielectrics) to serve as different components in wearable e-textiles and then provide an overview of environmentally friendly digital manufacturing techniques for such textiles which involve less or no water utilization, combined with a reduction in both material waste and energy consumption. Furthermore, standardized parameters for evaluating the sustainability of e-textiles are established, such as life cycle analysis, biodegradability, and recyclability. Finally, we discuss the current development trends, as well as the future research directions for wearable e-textiles which include an integrated product design approach based on the use of eco-friendly materials, the development of sustainable manufacturing processes, and an effective end-of-the-life strategy to manufacture next generation smart and sustainable wearable e-textiles that can be either recycled to value-added products or decomposed in the landfill without any negative environmental impacts.

From trash to treasure: review on upcycling of fruit and vegetable wastes into starch based bioplastics

Growing public concern toward environmental sustainability is currently motivating a paradigm shift toward designing easily degradable plastics that can replace conventional synthetic plastics. The massive rise in food waste generation has led to an increased burden on landfills, thereby resulting in the higher emission of greenhouse gases. Using this food waste to produce bioplastics will benefit not only the environment but also develop a systematic food waste management system. Moreover, bioplastics are preferred due to the use of biomaterials derived from renewable resources. Furthermore, bioplastics degrade faster than conventional synthetic plastics, which take years to degrade. The biodegradation of bioplastics occurs under normal environmental conditions and disintegrates into carbon dioxide, water, biomass, and inorganic compounds without producing hazardous residues. In this review, we will discuss the synthesis of starch based bioplastics using discarded parts of various fruits and vegetables. Furthermore, we will address the importance of various components in the development of starch based bioplastics, such as fillers, plasticizers, and other additives that are essential in providing the bioplastic with different physio-mechanical properties. Therefore, bioplastic production using food waste will pave the way to achieve systematic waste management and environmental sustainability in the near future.

Biodegradation of polyethylene by Meyerozyma guilliermondii and Serratia marcescens isolated from the gut of waxworms (larvae of Plodia interpunctella)

The widespread use of polyethylene (PE) causes a large amount of indigestible plastic waste. Waxworms (the larvae of Plodia interpunctella) can eat PE, but the degradation principle of PE under the action of intestinal microorganisms is still unclear, especially the insufficient research on key degradable PE strains. In this study, we fed waxworms with PE. Two strains with high PE degradation efficiency were isolated and purified, and the effects of single and microbial consortia on PE degradation were evaluated by water contact angle (WCA), FTIR, GC-MS, SEM and RT-qPCR. The results showed that Meyerozyma guilliermondii ZJC1 (MgZJC1) and Serratia marcescens ZJC2 (SmZJC2) could degrade PE. However, the degradation efficiency of the microbial consortium was higher, and the weight loss rate of PE was 15.87 %. In addition, the PE degradation products of MgZJC1 were C₉H₁₀O, C₂₀H₁₅NO, C₂₈H₄₄O₃ and C₁₆H₃₂O₂, and the PE degradation products of SmZJC2 were C₁₆H₁₈O, C₁₄H₁₈N₂O₇ and C₃₁H₄₈O₆. The PE degradation products of the microbial consortium were C₁₁H₂₄, C₁₉H₁₀O, C₁₅H₃₂, C₁₄H₃₀, C₁₆H₃₄, C₂₅H₅₂ and C₂₇H₅₆. RT-qPCR results showed that SmZJC2 promoted PE degradation by upregulating the expression of multiple genes, such as multicopper oxidase genes (PiSm-CueO). MgZJC1 responded to carbon deficiency by upregulating the expression of multiple genes, such as key enzyme genes in the tricarboxylic acid (TCA) cycle. This study can be used to develop an efficient microbial consortium for PE degradation and provide a basis for the reuse of PE waste. It can also provide a research basis for the joint degradation of PE by microbial consortia composed of bacteria and fungi.

Biodegradable Polyesters and Low Molecular Weight Polyethylene in Soil: Interrelations of Material Properties, Soil Organic Matter Substances, and Microbial Community

Conventional and also biodegradable polymer microplastics have started to be broadly present in the environment, if they end up in soil, they may influence both abiotic and biotic soil properties. In this study, the interactions of polyethylene wax together with three biodegradable polyesters PLA, PHB and PBAT with a soil matrix were investigated over a 1-year incubation period. Soil organic matter content was measured using UV-VIS, the microbial biomass amount was measured using qPCR, the mineralisation of polymers was measured using UGA 3000, the surface of polymers was observed with SEM, live/dead microorganisms were determined by fluorescent microscopy and microbial consortia diversity was analyzed using NGS. The amount of humic substances was generally higher in incubations with slowly degrading polyesters, but the effect was temporary. The microbial biomass grew during the incubations; the addition of PHB enhanced fungal biomass whereas PE wax enhanced bacterial biomass. Fungal microbial consortia diversity was altered in incubations with PHB and PBAT. Interestingly, these two polyesters were also covered in biofilm, probably fungal. No such trend was observed in a metagenomic analysis of bacteria, although, bacterial biofilm was probably formed on the PE520 surface. Different methods confirmed the effect of certain polymers on the soil environment.

Current scenario and challenges of plastic pollution in Bangladesh: a focus on farmlands and terrestrial ecosystems

Plastic is considered one of the most indispensable commodities in our daily life. At the end of life, the huge ever-growing pile of plastic waste (PW) causes serious concerns for our environment, including agricultural farmlands, groundwater quality, marine and land ecosystems, food toxicity and human health hazards. Lack of proper infrastructure, financial backup, and technological advancement turn this hazardous waste plastic management into a serious threat to developing countries, especially for Bangladesh. A comprehensive review of PW generation and its consequences on environment in both global and Bangladesh contexts is presented. The dispersion routes of PW from different sources in different forms (microplastic, macroplastic, nanoplastic) and its adverse effect on agriculture, marine life and terrestrial ecosystems are illustrated in this work. The key challenges to mitigate PW pollution and tackle down the climate change issue is discussed in this work. Moreover, way forward toward the design and implementation of proper PW management strategies are highlighted in this study.

Co-diet supplementation of low density polyethylene and honeybee wax did not influence the core gut bacteria and associated enzymes of Galleria mellonella larvae (Lepidoptera: Pyralidae)

The current plastic pollution throughout the world is a rising concern that demands the optimization of biodegradation processes. One avenue for this is to identify plastic-degrading bacteria and associated enzymes from the gut bacteria of insect models such as Tenebrio molitor, Plodia interpunctella or Galleria mellonella that have the ability to ingest and rapidly degrade polyethylene. Therefore, this study takes part in understanding the role of the gut bacteria by investigating G. mellonella as a biological model feeding with a diet based on honeybee wax mixed or not with low-density polyethylene. Gut microbiome was analyzed by high throughput 16S rRNA sequencing, and Enterococcaceae and Oxalobacteraceae were found to be the major bacterial families. Compared to the control, the supplementation of low-density polyethylene did not cause significant modification of the bacterial microbiota at community and taxa levels, suggesting bacterial microbiome resilience. The bacterial proteome analysis of gut contents was encouraging for the identification of plastic degrading enzymes such as the phenylacetaldehyde dehydrogenase which participate in styrene degradation. This study allowed a better characterization of the gut bacteria of G. mellonella and provided a basis for the further study of biodegradation of polyethylene based on the bacterial microbiota from insect guts.

Biodegradation of renewable polyurethane foams in marine environments occurs through depolymerization by marine microorganisms

Accumulation of plastics in the Earth's oceans is causing widespread disruption to marine ecosystems. To help mitigate the environmental burden caused by non-degradable plastics, we have previously developed a commercially relevant polyurethane (PU) foam derived from renewable biological materials that can be depolymerized into its constituent monomers and consumed by microorganisms in soil or compost. Here we demonstrate that these same PU foams can be biodegraded by marine microorganisms in the ocean and by isolated marine microorganisms in an ex situ seawater environment. Using Fourier-transform infrared (FTIR) spectroscopy, we tracked molecular changes imparted by microbial breakdown of the PU polymers; and utilized scanning electron microscopy (SEM) to demonstrate the loss of physical structure associated with colonization of microorganisms on the PU foams. We subsequently enriched, isolated, and identified individual microorganisms, from six marine sites around San Diego, CA, that are capable of depolymerizing, metabolizing, and accumulating biomass using these PU foams as a sole carbon source. Analysis using SEM, FTIR, and gas chromatography-mass spectrometry (GCMS) confirmed that these microorganisms depolymerized the PU into its constitutive diols, diacids, and other PU fragments. SEM and FTIR results from isolated organismal biodegradation experiments exactly matched those from ex situ and ocean biodegradation samples, suggesting that these PU foam would undergo biodegradation in a natural ocean environment by enzymatic depolymerization of the PU foams and eventual uptake of the degradation products into biomass by marine microorganisms, should these foams unintentionally end up in the marine environment, as many plastics do.

Microplastics in sewage sludge: Distribution, toxicity, identification methods, and engineered technologies

Microplastic pollution is becoming a global challenge due to its long-term accumulation in the environment, causing adverse effects on human health and the ecosystem. Sludge discharged from wastewater treatment plants (WWTPs) plays a critical role as a carrier and primary source of environmental microplastic contamination. A significantly average microplastic variation between 1000 and 301,400 particles kg^-1 has been reported in the sludge samples. In recent years, advanced technologies have been successfully applied to address this issue, including adsorption, advanced oxidation processes (AOPs), and membrane bioreactors (MBRs). Adsorption technologies are essential to utilizing novel adsorbents (e.g., biochar, graphene, zeolites) for effectively removing MPs. Especially, the removal efficiency of polymer microspheres from an aqueous solution by Mg/Zn modified magnetic biochars (Mg/Zn-MBC) was obtained at more than 95%. Also, advanced oxidation processes (AOPs) are widely applied to degrade microplastic contaminants, in which photocatalytic by semiconductors (e.g., TiO₂ and ZnO) is a highly suitable approach to promote the degradation reactions owing to strongly hydroxyl radicals (OH*). Biological degradation-aided microorganisms (e.g., bacterial and fungal strains) have been reported to be suitable for removing microplastics. Yet, it was affected by biotic and abiotic factors of the environmental conditions (e.g., pH, light, temperature, moisture, bio-surfactants, microorganisms, enzymes) as well as their polymer characteristics, i.e., molecular weight, functional groups, and crystallinity. Notably, membrane bioreactors (MBRs) showed the highest efficiency in removing up to 99% microplastic particles and minimizing their contamination in sewage sludge. Further, MBRs illustrate the suitability for treating high-strength compounds, e.g., polymer debris and microplastic fibers from complex industrial wastewater. Finally, this study provided a comprehensive understanding of potential adverse risks, transportation pathways, and removal mechanisms of microplastic, which full-filled the knowledge gaps in this field.

Critical Review on the Progress of Plastic Bioupcycling Technology as a Potential Solution for Sustainable Plastic Waste Management

Plastic production worldwide has doubled in the last two decades and is expected to reach a four-fold increase by 2050. The durability of plastic makes them a perfect material for many applications, but it is also a key limitation to their end-of-life management. The current plastic lifecycle is far from circular, with only 13% being collected for recycling and 9% being successfully recycled, indicating the failure of current recycling technology. The remaining plastic waste streams are thus incinerated, landfilled, or worse, mismanaged, leading to them leaking into the environment. To promote plastic circularity, keeping material in the loop is a priority and represents a more sustainable solution. This can be achieved through the reuse of plastic items, or by using plastic waste as a resource for new materials, instead of discarding them as waste. As the discovery of plastic-degrading/utilizing microorganisms and enzymes has been extensively reported recently, the possibility of developing biological plastic upcycling processes is opening up. An increasing amount of studies have investigated the use of plastic as a carbon source for biotechnological processes to produce high-value compounds such as bioplastics, biochemicals, and biosurfactants. In the current review, the advancements in fossil-based plastic bio- and thermochemical upcycling technologies are presented and critically discussed. In particular, we highlight the developed (bio)depolymerization coupled with bioconversion/fermentation processes to obtain industrially valuable products. This review is expected to contribute to the future development and scale-up of effective plastic bioupcycling processes that can act as a drive to increase waste removal from the environment and valorize post-consumer plastic streams, thus accelerating the implementation of a circular (plastic) economy.

Freshwater-Derived Streptomyces: Prospective Polyvinyl Chloride (PVC) Biodegraders

Polyvinyl chloride (PVC) is widely used in industrial applications, such as construction and clothing, owing to its chemical, physical, and environmental resistance. Owing to the previous characteristics, PVC is the third most consumed plastic worldwide and, consequently, an increasing waste accumulation-related problem. The current study evaluated an in-house collection of 61 Actinobacteria strains for PVC resin biodegradation. Weight loss percentage was measured after the completion of incubation. Thermo-gravimetric analysis was subsequently performed using the PVC incubated with the three strains exhibiting the highest weight loss. GC-MS and ionic exchange chromatography analyses were also performed using the culture media supernatant of these three strains. After incubation, 14 strains had a PVC weight loss percentage higher than 50% in ISP-2 broth. These 14 strains were identified as Streptomyces strains. Strains 208, 250, and 290 showed the highest weight loss percentages (57.6–61.5% range). The thermal stability of PVC after bacterial exposure using these three strains was evaluated, and a modification of the representative degradation stages of nonincubated PVC was observed. Additionally, GC-MS analysis revealed the presence of aromatic compounds in the inoculated culture media, and ionic exchange chromatography showed chloride release in the supernatant. A mathematical relation between culture conditions and PVC weight loss was also found for strains 208 and 290, showing an accuracy up to 97.99%. These results highlight the potential of the freshwater-derived Streptomyces strains as candidates for the PVC biodegradation strategy and constitute the first approach to a waste management control scale-up process.

Production of PETase by engineered Yarrowia lipolytica for efficient poly(ethylene terephthalate) biodegradation

There has been a growing interest in poly(ethylene terephthalate) PET degradation studies in the last few years due to its widespread use and large-scale plastic waste accumulation in the environment. One of the most promising enzymatic methods in the context of PET degradation is the use of PETase from Ideonella sakaiensis, which has been reported to be an efficient enzyme for hydrolysing ester bonds in PET. In our study, we expressed a codon-optimized PETase gene in the yeast Yarrowia lipolytica. The obtained strain was tested for its ability to degrade PET directly in culture, and a screening of different supplements that might raise the level of PET hydrolysis was performed. We also carried out long-term cultures with PET film, the surface of which was examined by scanning electron microscopy. The efficiency of PET degradation was tested based on the concentration of degradation products released, and the results showed that supplementation of the culture with olive oil resulted in 66 % higher release of terephthalic acid into the medium compared to the mutant culture without supplementation. The results indicate the possibility of ethylene glycol uptake by both strains, and, additionally, the PETase produced by the newly engineered strain hydrolyses MHET. The structure of the PET film after culture with the modified strain, meanwhile, had numerous surface defects, cracks, and deformations.

Post-Consumer Poly(ethylene terephthalate) (PET) Depolymerization by Yarrowia lipolytica: A Comparison between Hydrolysis Using Cell-Free Enzymatic Extracts and Microbial Submerged Cultivation

Several microorganisms have been reported as capable of acting on poly(ethylene terephthalate) (PET) to some extent, such as Yarrowia lipolytica, which is a yeast known to produce various hydrolases of industrial interest. The present work aims to evaluate PET depolymerization by Y. lipolytica using two different strategies. In the first one, biocatalysts were produced during solid-state fermentation (SSF-YL), extracted and subsequently used for the hydrolysis of PET and bis(2-hydroxyethyl terephthalate) (BHET), a key intermediate in PET hydrolysis. Biocatalysts were able to act on BHET, yielding terephthalic acid (TPA) (131.31 µmol L-1), and on PET, leading to a TPA concentration of 42.80 µmol L-1 after 168 h. In the second strategy, PET depolymerization was evaluated during submerged cultivations of Y. lipolytica using four different culture media, and the use of YT medium ((w/v) yeast extract 1%, tryptone 2%) yielded the highest TPA concentration after 96 h (65.40 µmol L-1). A final TPA concentration of 94.3 µmol L-1 was obtained on a scale-up in benchtop bioreactors using YT medium. The conversion obtained in bioreactors was 121% higher than in systems with SSF-YL. The results of the present work suggest a relevant role of Y. lipolytica cells in the depolymerization process.

Environmental risk, toxicity, and biodegradation of polyethylene: a review

Polyethylene is the second-most-commonly-used commercial polymer. It is used in various industries, including agricultural mulches, composite materials, and packaging. Since polyethylene is not biodegradable, it can persist for a long time in water and soil, strangling otherwise fruitful land. The ecological and toxicological consequences and the fate of polyethylene have only recently been revealed. As a result, the primary goal of this review is to shed light on the reported toxicity of polyethylene to the environment and living creatures and highlight recent research on its degradation process through bibliometric analysis. To do that, we searched Web of Science database literature up to August 2021 and performed the bibliometric analysis using VOSviewer. We found that relative research interest showed a positive trend, particularly in the last 5 years. China and the Chinese Academy of Sciences had the highest published papers. Methods for polyethylene biodegradation by invertebrates, bacteria, and fungi were also reported indicating the need for future research to investigate and develop new biodegradation technologies.

Preliminary investigation of microorganisms potentially involved in microplastics degradation using an integrated metagenomic and biochemical approach

Plastic pollution is becoming an emerging environmental issue due to inappropriate disposal at the end of the materials life cycle. When plastics are released, they undergo physical and chemical corrosion, leading to the formation of small particles, commonly referred to as microplastics. In this study, a microbial community derived from the leachate of a bioreactor containing a mixture of soil and plastic collected during a landfill mining process underwent an enrichment protocol in order to select the microbial species specifically involved in plastic degradation. The procedure was set up and tested on polyethylene, polyvinyl chloride, and polyethylene terephthalate, both in anaerobic and aerobic conditions. The evolution of the microbiome has been monitored using a combined approach based on microscopy, marker-gene amplicon sequencing, genome-centric metagenomics, degradation assays, and GC-MS analyses. This procedure permitted us to deeply investigate the metabolic pathways potentially involved in plastic degradation and to depict the route for microplastics metabolization from the enriched microbial community. Six enzymes, among the ones already identified, were found in our samples (alkane 1-monooxygenase, cutinase, feruloyl esterase, triacylglycerol lipase, medium-chain acyl-CoA dehydrogenase, and protocatechuate 4,5-dioxygenase) and new enzymes, addressed as MHETases most probably for the presence of the catalytic triad (His-Asp-Ser), were detected. Among the enzymes involved in plastics degradation, alkane 1-monooxygenase was found in high copy number (between ten and 62 copies) in the metagenomes that resulted most abundant in the microbiome enriched with polyethylene, while protocatechuate 4,5-dioxygenase was found between one and eight copies in the most abundant metagenomes of the microbial culture enriched with polyethylene terephthalate. Degradation assays, performed using both bacterial lysates and supernatants, revealed interesting results on polyethylene terephthalate degradation. Moreover, this study demonstrates to what extent different types of microplastics can affect the microbial community composition. The results obtained significantly increase the knowledge of the plastic degradation process.

Optimization of Polystyrene Biodegradation by Bacillus cereus and Pseudomonas alcaligenes Using Full Factorial Design

Microplastics (MP) are a global environmental problem because they persist in the environment for long periods of time and negatively impact aquatic organisms. Possible solutions for removing MP from the environment include biological processes such as bioremediation, which uses microorganisms to remove contaminants. This study investigated the biodegradation of polystyrene (PS) by two bacteria, Bacillus cereus and Pseudomonas alcaligenes, isolated from environmental samples in which MPs particles were present. First, determining significant factors affecting the biodegradation of MP-PS was conducted using the Taguchi design. Then, according to preliminary experiments, the optimal conditions for biodegradation were determined by a full factorial design (main experiments). The RSM methodology was applied, and statistical analysis of the obtained models was performed to analyze the influence of the studied factors. The most important factors for MP-PS biodegradation by Bacillus cereus were agitation speed, concentration, and size of PS, while agitation speed, size of PS, and optical density influenced the process by Pseudomonas alcaligenes. However, the optimal conditions for biodegradation of MP-PS by Bacillus cereus were achieved at γ_MP = 66.20, MP size = 413.29, and agitation speed = 100.45. The best conditions for MP-PS biodegradation by Pseudomonas alcaligenes were 161.08, 334.73, and 0.35, as agitation speed, MP size, and OD, respectively. In order to get a better insight into the process, the following analyzes were carried out. Changes in CFU, TOC, and TIC concentrations were observed during the biodegradation process. The increase in TOC values was explained by the detection of released additives from PS particles by LC-MS analysis. At the end of the process, the toxicity of the filtrate was determined, and the surface area of the particles was characterized by FTIR-ATR spectroscopy. Ecotoxicity results showed that the filtrate was toxic, indicating the presence of decomposition by-products. In both FTIR spectra, a characteristic weak peak at 1715 cm⁻¹ was detected, indicating the formation of carbonyl groups (−C=O), confirming that a biodegradation process had taken place.

Biodegradation of Biodegradable Polymers in Mesophilic Aerobic Environments

Finding alternatives to diminish plastic pollution has become one of the main challenges of modern life. A few alternatives have gained potential for a shift toward a more circular and sustainable relationship with plastics. Biodegradable polymers derived from bio- and fossil-based sources have emerged as one feasible alternative to overcome inconveniences associated with the use and disposal of non-biodegradable polymers. The biodegradation process depends on the environment's factors, microorganisms and associated enzymes, and the polymer properties, resulting in a plethora of parameters that create a complex process whereby biodegradation times and rates can vary immensely. This review aims to provide a background and a comprehensive, systematic, and critical overview of this complex process with a special focus on the mesophilic range. Activity toward depolymerization by extracellular enzymes, biofilm effect on the dynamic of the degradation process, CO2 evolution evaluating the extent of biodegradation, and metabolic pathways are discussed. Remarks and perspectives for potential future research are provided with a focus on the current knowledge gaps if the goal is to minimize the persistence of plastics across environments. Innovative approaches such as the addition of specific compounds to trigger depolymerization under particular conditions, biostimulation, bioaugmentation, and the addition of natural and/or modified enzymes are state-of-the-art methods that need faster development. Furthermore, methods must be connected to standards and techniques that fully track the biodegradation process. More transdisciplinary research within areas of polymer chemistry/processing and microbiology/biochemistry is needed.

Enhanced biodegradation of waste poly(ethylene terephthalate) using a reinforced plastic degrading enzyme complex

Poly(ethylene terephthalate) (PET) is synthesized via a rich ester bond between terephthalate (TPA) and ethylene glycol (EG). Because of this, PET degradation takes a long time and PET accumulates in the environment. Many studies have been conducted to improve PET degrading enzyme to increase the efficiency of PET depolymerization. However, enzymatic PET decomposition is still restricted, making upcycling and recycling difficult. Here, we report a novel PET degrading complex composed of Ideonella sakaiensis PETase and Candida antarctica lipase B (CALB) that improves degradability, binding ability and enzyme stability. The reaction mechanism of chimeric PETase (cPETase) and chimeric CALB (cCALB) was confirmed by PET and bis (2-hydroxyethyl terephthalate) (BHET). cPETase generated BHET and mono (2-hydroxyethyl terephthalate (MHET) and cCALB produced terephthalate (TPA). Carbohydrate binding module 3 (CBM3) in the scaffolding protein greatly improved PET film binding affinity. Finally, the final enzyme complex demonstrated a 6.5-fold and 8.0-fold increase in the efficiency of hydrolysis from PET with either high crystalline or waste to TPA than single enzymes, respectively. This complex could effectively break down waste PET while maintaining enzyme stability and would be applied for biological upcycling of TPA.

Wax worm saliva and the enzymes therein are the key to polyethylene degradation by Galleria mellonella

Plastic degradation by biological systems with re-utilization of the by-products could be a future solution to the global threat of plastic waste accumulation. Here, we report that the saliva of Galleria mellonella larvae (wax worms) is capable of oxidizing and depolymerizing polyethylene (PE), one of the most produced and sturdy polyolefin-derived plastics. This effect is achieved after a few hours’ exposure at room temperature under physiological conditions (neutral pH). The wax worm saliva can overcome the bottleneck step in PE biodegradation, namely the initial oxidation step. Within the saliva, we identify two enzymes, belonging to the phenol oxidase family, that can reproduce the same effect. To the best of our knowledge, these enzymes are the first animal enzymes with this capability, opening the way to potential solutions for plastic waste management through bio-recycling/up-cycling.

The crucial first step in the biodegradation of polyethylene plastic is oxidation of the polymer. This has traditionally required abiotic pre-treatment, but now Bertocchini and colleagues report two wax worm enzymes capable of catalyzing this oxidation and subsequent degradation at room temperature.