Effective and selective recovery of Au(III) from WPCBs using quaternary phosphonium adsorbent synthesized by adjusting steric hindrance

With the gradual depletion of natural gold ore, waste printed circuit boards (WPCBs) have become one of the most attractive alternatives to gold ore. Here, a series of quaternary phosphonium adsorbents with a large size were successfully synthesized by adjusting the number of functional groups and carbon chain length of functional monomers, which can be used for selective recovery of gold(III) from WPCBs leaching solution. The quaternary phosphonium adsorbent (PS-TEP) prepared by the nucleophilic substitution reaction between triethyl phosphine with the smallest volume and chloromethylated polystyrene (PS-Cl) exhibited the best gold loading capacity (617.90 mg g-1). The adsorption mechanism of gold(III) on PS-TEP surface mainly involves anion exchange between AuCl4- and Cl- in the adsorbent. The charge level of the H atom closest to -CH2-P+ group directly determines the strength of the interaction between the adsorbent and the gold ion. Multiwfn and VMD programs visually confirm the weak interaction between PS-TEP+ and AuCl4-. After 5 adsorption-stripping cycles, the adsorption rate of gold(III) in solution remained at about 99 %. In addition, PS-TEP exhibited good gold(III) selectivity in both simulated and actual WPCBs gold leaching solutions. These results indicate that the large-particle PS-TEP with high capacity is suitable for selective gold recovery from WPCBs leaching solution.

Amplifying chlorinated phenol decomposition via Dual-Pathway O2 Activation: The impact of zirconium loading on BiOCl

The effectiveness of photocatalytic molecular oxygen (O2) activation in pollutant removal relies on the targeted production of reactive oxygen species (ROS). Herein, we demonstrate the dual-pathway activation of O2 on BiOCl through zirconium (Zr) loading. The incorporation of Zr onto the surface of BiOCl not only leads to an increased generation of oxygen vacancies (OV) but also fosters a coupling between the d electrons of Zr and OV, forming dual-active sites known as Zr-oxygen vacancies (Zr-OV). Generally, OV adsorbs O2 and transfers one electron directly to form superoxide radicals (•O2-). Contrary to the conventional single-electron direct activation of O2 to form •O2-, Zr-OV exhibits more flexible coordination and superior electron-donating capabilities. It facilitates O2 conversion to peroxide radicals (O22-) and enables the subsequent generation of •O2- from O22-, significantly promotes the dechlorination and mineralization efficiency of chlorophenol under visible light. This study presents a straightforward strategy to precisely regulate ROS production by expanding pathways, shedding light on the critical role of managing ROS generation for effective pollutant purification.

Purification of gamma-cyclodextrin via selective coordination with potassium ions to form metal-organic frameworks

Efficient purification of gamma-cyclodextrin (γ-CD) is always challenging due to its structural similarity to other CDs and low crystallinity in water. In addressing this issue, an approach was proposed based on the formation mechanism of cyclodextrin metal-organic frameworks (CD-MOFs). This method involved the selective coordination of CDs mixture with potassium ions in water, facilitated by ethanol-induced crystallization, leading to the purification of γ-CD. The results showed that potassium ions enhanced γ-CD crystallization, and ethanol was crucial to selectively coordinating potassium ions with γ-CD. The characterizations revealed that the resulting CD-MOFs exhibited a small particle size, high surface area, and high thermal stability, and was identical to γ-CD-MOF, further indicating the final γ-CD with high purity. The separation factors of γ-CD/α-CD and γ-CD/β-CD were 309 and 260, respectively. Moreover, this method was validated through its application to the industrial enzymatic CDs mixture. The purification of γ-CD could achieve 99.99 ± 0.01 % after four crystallization cycles. Therefore, selectively coordinating with potassium ions to form MOFs provided a valuable reference for the purification of γ-CD and even the direct synthesis of γ-CD-MOF from CDs mixture. This advancement will also benefit the future production and application of γ-CD.

When covalent organic frameworks meet zeolites: Enhancing rhodamine B removal through the synergy in the emerging organic-inorganic nanoadsorbents

The development of new porous materials has attracted intense attention as adsorbents for removing pollutants from wastewater. However, pure inorganic and organic porous materials confront various problems in purifying the wastewater. In this work, we integrated a covalent organic framework (TpPa-1) with an inorganic zeolite (TS-1) for the first time via a solvothermal method to fabricate new-type nanoadsorbents. The covalent organic framework/zeolite (TpPa-1/TS-1) nanoadsorbents combined the merits of the zeolite and COF components and possessed efficient adsorptive removal of organic contaminants from solution. Structural morphology and chemical composition characterization by powder X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and thermogravimetric analysis demonstrated the successful preparation of TpPa-1/TS-1 composite nanoadsorbents. The resultant composite adsorbent TpPa-1/TS-1 removed rhodamine B at 1.7 and 2.6 times the efficiency of TpPa-1 and TS-1, respectively. Additional investigation revealed that the Freundlich adsorption isotherm and the pseudo-second-order kinetic model could be employed to represent the adsorption process more appropriately. Thermodynamic calculation analysis showed that the adsorption process proceeded spontaneously and exothermically. Besides, the effects of pH, absorbent mass and ionic strength on the adsorption performance were systematically investigated. The prepared composite adsorbent showed a slight decrease in removal efficiency after eight cycles of repeated use, and real water environment experiments also showed the high stability of the adsorbent. The enhanced performance can be attributed to electrostatic interaction, acid-base interaction, hydrogen bonding and π-π interactions.

A disposable immunosensor array using cellulose paper assembled chemiresistive biosensor for simultaneous monitoring of mycotoxins AFB1 and FB1

Due to the common contamination of multiple mycotoxins in food, which results in stronger toxicity, it is particularly important to simultaneously test for various mycotoxins for the protection of human health. In this study, a disposable immunosensor array with low-cost was designed and fabricated using cellulose paper, polydimethylsiloxane (PDMS), and semiconducting single-walled carbon nanotubes (s-SWCNTs), which was modified with specific antibodies for mycotoxins AFB1 and FB1 detection. The strategy for fabricating the immunosensor array with two individual channels involved a two-step protocol starting with the form of two kinds of carbon films by depositing single-wall carbon nanotubes (SWCNTs) and s-SWCNTs on the cellulose paper as the conductive wire and sensing element, followed by the assembly of chemiresistive biosensor with SWCNTs strip as the wire and s-SWCNTs as the sensing element. After immobilizing AFB1-bovine serum albumin (AFB1-BSA) and FB1-bovine serum albumin (FB1-BSA) separately on the different sensing regions, the formation of mycotoxin-BSA-antibody immunocomplexes transfers to electrochemical signal, which would change with the different concentrations of free mycotoxins. Under optimal conditions, the immunosensor array achieved a limit of detection (LOD) of 0.46 pg/mL for AFB1 and 0.34 pg/mL for FB1 within a wide dynamic range from 1 pg/mL to 20 ng/mL. Furthermore, the AFB1 and FB1 spiked in the ground corn and wheat extracts were detected with satisfactory recoveries, demonstrating the excellent practicality of this established method for simultaneous detection of mycotoxins.

Peroxysulfur species-mediated enhanced oxidation of micropollutants by ferrate(VI): Peroxymonosulfate versus peroxydisulfate

Many studies have shown that Peroxymonosulfate (PMS) works synergistically with ferrate (Fe(VI)) to remove refractory organic compounds in a few minutes. However, little has been reported on the combined effects of peroxydisulfate (PDS) and Fe(VI). Since PDS is stable and cost effective, it is of practical significance to study the reaction mechanism and conditions of the PDS/Fe(VI) system. The results of the study indicate that the intermediate Fe(II) is formed during the decomposition of Fe(VI), which is then rapidly oxidized. Due to the asymmetry of the PMS molecular structure, PMS can rapidly trap Fe(II) (kPMS/Fe(II)= 3 × 104 M-1∙s-1), whereas PDS cannot (kPDS/Fe(II)= 26 M-1∙s-1). Hydroxylamine hydrochloride (HA) can reduce Fe(VI) and Fe(III) to Fe(II) to excite PDS to produce SO4•-. Acetate helps to detect Fe(II), but does not help PDS to trap Fe(II). Active species such as SO4•-, •OH, 1O2, and Fe(IV), Fe(V) are present in both systems, but in different amounts. In the PMS/Fe(Ⅵ) system, all these active species react with ibuprofen (IBP) and degrade IBP within several minutes. The effects of the initial pH, PMS or Fe(VI) dosage, and different amounts of IBP on the removal rate of IBP were investigated. According to the intermediates detected by the GC-MS, the degradation process of IBP includes hydroxylation, demethylation and single bond breakage. The degradation pathways of IBP were proposed. The degradation of IBP in tap water and Songhua River was also investigated. In actual water treatment, the dosage needs to be increased to achieve the same results. This study provides a basis and theoretical support for the application of PMS/Fe(Ⅵ) and PDS/Fe(VI) system in water treatment.

Advances in biosensors for major depressive disorder diagnostic biomarkers

Depression is one of the most common mental disorders and is mainly characterized by low mood or lack of interest and pleasure. It can be accompanied by varying degrees of cognitive and behavioral changes and may lead to suicide risk in severe cases. Due to the subjectivity of diagnostic methods and the complexity of patients' conditions, the diagnosis of major depressive disorder (MDD) has always been a difficult problem in psychiatry. With the discovery of more diagnostic biomarkers associated with MDD in recent years, especially emerging non-coding RNAs (ncRNAs), it is possible to quantify the condition of patients with mental illness based on biomarker levels. Point-of-care biosensors have emerged due to their advantages of convenient sampling, rapid detection, miniaturization, and portability. After summarizing the pathogenesis of MDD, representative biomarkers, including proteins, hormones, and RNAs, are discussed. Furthermore, we analyzed recent advances in biosensors for detecting various types of biomarkers of MDD, highlighting representative electrochemical sensors. Future trends in terms of new biomarkers, new sample processing methods, and new detection modalities are expected to provide a complete reference for psychiatrists and biomedical engineers.

Comparison of the effects of Amomum tsaoko and its adulterants on functional dyspepsia rats based on metabolomics analysis

Amomum tsaoko (AT) is commonly used in clinical practice to treat abdominal distension and pain. It is also a seasoning for cooking, with the functions of appetizing, invigorating the spleen, and being digestive-promoting. Amomum tsaoko (AT) has three adulterants, Amomum paratsaoko (AP), Amomum koenigii (AK), and Alpinia katsumadai Hayata, because of the confusion in historical classics regarding recorded sources as well as the near geographic distribution and fruit morphological similarities. In this study, we established a functional dyspepsia (FD) rat model and then treated it with the corresponding medicinal solutions AT, AP, AK, and AKH. The gastric emptying rate, intestinal propulsion rate, serum biochemical indicators, histopathological changes, and fecal metabolism were measured. The efficacy and mechanism of AT, AP, AK, and AKH in the treatment of FD were compared. Fecal metabolomics revealed that 20 potential biomarkers were involved in seven significant metabolic pathways in FD rats. These pathways include ubiquinone and other terpenoid-quinone biosynthesis, glycerophospholipid metabolism, tyrosine metabolism, primary bile acid biosynthesis, purine metabolism, folate biosynthesis, and amino sugar and nucleotide sugar metabolism. AP regulates 6 metabolic pathways, 5 metabolic pathways affected by AT, 4 metabolic pathways affected by AK, and 2 metabolic pathways affected by AKH.The above results suggest that the different effects of AT, AP, AK, and AKH on FD rats may be due to their different regulatory effects on the metabolome.

A colorimetric sensor for rapid discrimination of tea polyphenols and tea authentication based on Rh-decorated Pd nanocubes with high peroxidase-like activity

The rapid development of nanozymes has offered substantial opportunities for the fields of biomedicine, chemical sensing, and food safety. Among these applications, multichannel sensors, with the capability of simultaneously detecting multiple target analytes, hold promise for the practical application of nanozymes in chemical sensing with high detection efficiency. In this study, Rh-decorated Pd nanocubes (Pd-Rh nanocubes) with significantly enhanced peroxidase-like activity are synthesized through the mediation of underpotential deposition (UPD) and subsequently employed to develop a multichannel colorimetric sensor for discriminating tea polyphenols (TPs) and tea authentication. Based on a single reactive unit of efficient catalytic oxidation of 3,3',5,5'-tetramethylbenzidine dihydrochloride (TMB), the nanozyme-based multichannel colorimetric sensor responds to each analyte in as short as 1 min. With the aid of principal component analysis (PCA) and hierarchical cluster analysis (HCA), various TPs and types of tea can be accurately identified. This work not only provides a new type of simply structured and highly active nanozymes but also develops a concise and rapid multichannel sensor for practical application in tea authentication and quality inspection.

Mesenchymal stem cells biological and biotechnological advances: Implications for clinical applications

BACKGROUND

Mesenchymal stem cells (MSCs) are multipotent stem cells that are able to differentiate into multiple lineages including bone, cartilage, muscle and fat. They hold immunomodulatory properties and therapeutic ability to treat multiple diseases, including autoimmune and chronic degenerative diseases. In this article, we reviewed the different biological properties, applications and clinical trials of MSCs. Also, we discussed the basics of manufacturing conditions, quality control, and challenges facing MSCs in the clinical setting.

METHODS

Extensive review of the literature was conducted through the databases PubMed, Google Scholar, and Cochrane. Papers published since 2015 and covering the clinical applications and research of MSC therapy were considered. Furthermore, older papers were considered when referring to pioneering studies in the field.

RESULTS

The most widely studied stem cells in cell therapy and tissue repair are bone marrow-derived mesenchymal stem cells. Adipose tissue-derived stem cells became more common and to a lesser extent other stem cell sources e.g., foreskin derived MSCs. MSCs therapy were also studied in the setting of COVID-19 infections, ischemic strokes, autoimmune diseases, tumor development and graft rejection. Multiple obstacles, still face the standardization and optimization of MSC therapy such as the survival and the immunophenotype and the efficiency of transplanted cells. MSCs used in clinical settings displayed heterogeneity in their function despite their extraction from healthy donors and expression of similar surface markers.

CONCLUSION

Mesenchymal stem cells offer a rising therapeutic promise in various diseases. However, their potential use in clinical applications requires further investigation.

Deep reinforcement learning in chemistry: A review

Reinforcement learning (RL) has been applied to various domains in computational chemistry and has found wide-spread success. In this review, we first motivate the application of RL to chemistry and list some broad application domains, for example, molecule generation, geometry optimization, and retrosynthetic pathway search. We set up some of the formalism associated with reinforcement learning that should help the reader translate their chemistry problems into a form where RL can be used to solve them. We then discuss the solution formulations and algorithms proposed in recent literature for these problems, the advantages of one over the other, together with the necessary details of the RL algorithms they employ. This article should help the reader understand the state of RL applications in chemistry, learn about some relevant actively-researched open problems, gain insight into how RL can be used to approach them and hopefully inspire innovative RL applications in Chemistry.

Design of pH-responsive molecularly imprinted polymer as a carrier for controlled and sustainable capecitabine release

A molecularly imprinting polymer (MIP) carrier with pH-responsivity was designed to construct a drug delivery system (DDS) focusing on controlled and sustainable capecitabine (CAPE) release. The pH-responsive characteristic was achieved by the functionalization of SiO2 substrate with 4-formylphenylboronic acid, accompanied by the introduction of fluorescein isothiocyanate for the visualization of the intracellular localization of the nanocarrier. Experimental results indicated that CAPE was adsorbed onto the drug carrier with satisfactory encapsulation efficiency. The controlled release of CAPE was realized based on the break of borate ester bonds between -B(OH)2 and cis-diols in the weakly acidic environment. Density functional theory computations were conducted to investigate the adsorption/release mechanism. Moreover, in vitro experiments confirmed the good biocompatibility and ideal inhibition efficiency of the developed DDS. The MIP can act as an eligible carrier and exhibits the great potential in practical applications for tumor treatment.

Dietary zinc supplements: beneficial health effects and application in food, medicine and animals

Zinc, a crucial trace element is vital for the growth and development of humans. It is frequently described as 'the flower of life' and 'the source of intelligence'. Zinc supplements play a pivotal role in addressing zinc deficiency by serving as a vital source of this essential micronutrients, effectively replenishing depleted zinc levels in the body. In this paper, we first described the biological behavior of zinc in the human body and briefly described the physiological phenomena associated with zinc levels. The benefits and drawbacks of various zinc supplement forms are then discussed, with emphasis on the most recent zinc supplement formulations. Finally, the application of zinc supplements in food, medicine, and animal husbandry is further summarized. © 2024 Society of Chemical Industry.

Selective penetration of fullerenol through pea seed coats mitigates osmosis-repressed germination via chromatin remodeling and transcriptional reprograming

BACKGROUND

The alteration of chromatin accessibility plays an important role in plant responses to abiotic stress. Carbon-based nanomaterials (CBNMs) have attracted increasing interest in agriculture due to their potential impact on crop productivity, showcasing effects on plant biological processes at transcriptional levels; however, their impact on chromatin accessibility remains unknown.

RESULTS

This study found that fullerenol can penetrate the seed coat of pea to mitigate the reduction of seed germination caused by osmotic stress. RNA sequencing (RNA-seq) revealed that the application of fullerenol caused the high expression of genes related to oxidoreduction to return to a normal level. Assay for transposase accessible chromatin sequencing (ATAC-seq) confirmed that fullerenol application reduced the overall levels of chromatin accessibility of numerous genes, including those related to environmental signaling, transcriptional regulation, and metabolism.

CONCLUSION

This study suggests that fullerenol alleviates osmotic stress on various fronts, encompassing antioxidant, transcriptional, and epigenetic levels. This advances knowledge of the working mechanism of this nanomaterial within plant cells. © 2024 Society of Chemical Industry.

Simulation study of a new racetrack FAIMS analyzer to achieve both high-resolution and high-sensitivity

A new racetrack field-asymmetric waveform ion mobility spectrometry (r-FAIMS) analyzer was developed in this study by combining the existing planar FAIMS (p-FAIMS) and cylindrical FAIMS (c-FAIMS). The ion inlet and outlet regions of r-FAIMS were consisted of a half of c-FAIMS, respectively, and these c-FAIMS were further connected by two p-FAIMS to form a racetrack shaped FAIMS. With such FAIMS working electrode configuration, the ions entering the r-FAIMS can be focused and separated in the first c-FAIMS section, be further separated in the p-FAIMS section with high-resolution, be focused and separated again in the final c-FAIMS section and eventually enter the mass spectrometer or other analyzers for analysis. Detailed simulation by using SIMION software with the default FAIMS user program showed that the ion focusing effect in the first c-FAIMS section ensures the ions entering the following p-FAIMS section as a compact ion packet. This effectively decreases the ion loss caused by Coulomb repulsion and thermal diffusion in p-FAIMS section as compared to the ions being introduced into the p-FAIMS gap randomly in the conventional design. As a result, the ion transmission efficiency of r-FAIMS is at least 3.3-fold higher than the single p-FAIMS under the operating conditions used in this study. The ion trajectory simulation results also showed that the resolving power of r-FAIMS is about the sum of the resolving powers for its c-FAIMS and p-FAIMS sections. The resolving power of r-FAIMS is at least 3.6-fold higher than the single c-FAIMS under the operation conditions used in this study. Therefore, the r-FAIMS can realize both high-resolution and high-sensitive ion mobility separation.

Catalytic NIR chemiluminescence sensor with enhanced persistence and intensity for in vivo imaging

Chemiluminescence (CL) is a self-illumination phenomenon that involves the emission of light from chemical reactions, and it provides favorable spatial and temporal information on biological processes. However, it is still a great challenge to construct effective CL sensors that equip strong CL intensity, long emission wavelength, and persistent luminescence for deep tissue imaging. Here, we report a liposome encapsulated polymer dots (Pdots)-based system using catalytic CL substrates (L-012) as energy donor and fluorescent polymers and dyes (NIR 695) as energy acceptors for efficient Near-infrared (NIR) CL in vivo imaging. Thanks to the modulation of paired donor and acceptor distance and the slow diffusion of biomarker by liposome, the Pdots show a NIR emission wavelength (λ em, max = 720 nm), long CL duration (>24 h), and a high chemiluminescence resonance energy transfer efficiency (46.5 %). Furthermore, the liposome encapsulated Pdots possess excellent biocompatibility, sensitive response to H2O2, and persistent whole-body NIR CL imaging in the drug-induced inflammation and the peritoneal metastatic tumor mouse model. In a word, this NIR-II CL nanoplatform with long-lasting emission and high spatial-temporal resolution will be a concise strategy in deep tissue imaging and clinical diagnostics.

Designing hard carbon microsphere structure via halogenation amination and oxidative polymerization reactions for sodium ion insertion mechanism investigation

Hard carbon as a negative electrode material for sodium-ion batteries (SIBs) has great commercial potential and has been widely studied. The sodium-ion intercalation in graphite domains and the filling of closed pores in the low voltage platform region still remain a subject of controversy. We have successfully constructed hard carbon materials with a pseudo-graphitic structure by using polymerizable p-phenylenediamine and dichloromethane as carbon sources. This was achieved by a halogenated amination reaction and oxidative polymerization. It was found that the capacity of hard carbon materials mainly originates from intercalation into graphite domains. The study found that the prepared hard carbon could store 339.33 mAh g-1 of sodium in a reversible way at a current density of 25 mA g-1, and it had an initial coulomb efficiency of 80.23%. It even maintained a reversible sodium storage capacity of 125.53 mAh g-1 at a high current density of 12.8 A g-1. Based on the analysis of hard carbon structure and electrochemical performance, it was shown that the materials conform with an "adsorption-intercalation" mechanism for sodium storage.

Synergistic effect of Ti3C2Tx MXene/PAN nanofiber and LLZTO particles on high-performance PEO-based solid electrolyte for lithium metal battery

Solid polymer electrolytes (SPEs) have been considered the most promising separators for all-solid-state lithium metal batteries (ASSLMBs) due to their ease of processing and low cost. However, the practical applications of SPEs in ASSLMBs are limited by their low ionic conductivities and mechanical strength. Herein, we developed a three-dimensional (3D) interconnected MXene (Ti3C2Tx) network and Li6.4La3Zr1.4Ta0.6O12 (LLZTO) particles synergistically reinforced polyethylene oxide (PEO)-based SPE, where the association of Li+ with ether-oxygen in PEO could be significantly weakened through the Lewis acid-base interactions between the electron-absorbing group (Ti-F, -O-) of Ti3C2Tx and Li+. Besides, the TFSI- in lithium salts could be immobilized by hydrogen bonds from the Ti-OH of Ti3C2Tx. The 3D interconnected Ti3C2Tx network not only alleviated the agglomeration of inorganic fillers (LLZTO), but also improved the mechanical strength of composite solid electrolyte (CSE). Consequently, the assembled Li||CSE||Li symmetric battery showed excellent cycling stability at 35 ℃ (stable cycling over 3000 h at 0.1 mA cm-2, 0.1 mAh cm-2) and -2 ℃ (stable cycling over 2500 h at 0.05 mA cm-2, 0.05 mAh cm-2). Impressively, the LiFePO4||CSE||Li battery showed a high discharge capacity of 145.3 mAh/g at 0.3 C after 300 cycles at 35 ℃. This rational structural design provided a new strategy for the preparation of high-performance solid-state electrolytes for lithium metal batteries.

Single-crystal oxygen-rich bismuth oxybromide nanosheets with highly exposed defective {10-1} facets for the selective oxidation of toluene under blue LED irradiation

Reactive radicals are crucial for activating inert and low-polarity C(sp3)-H bonds for the fabrication of high value-added products. Herein, novel single-crystal oxygen-rich bismuth oxybromide nanosheets (Bi4O5Br2 SCNs) with more than 85 % {10-1} facets exposure and oxygen defects were synthesized via a facile solvothermal route. The Bi4O5Br2 SCNs demonstrated excellent photocatalytic performance in the selective oxidation of toluene under blue light. The yield of benzaldehyde was 1876.66 μmol g-1 h-1, with a selectivity of approximately 90 %. Compared to that of polycrystalline Bi4O5Br2 nanosheets (Bi4O5Br2 PCNs), the activity of Bi4O5Br2 SCNs exhibit a 21-fold increase. Experimental studies and density functional theory (DFT) calculations have demonstrated that the defect Bi4O5Br2 (10-1) facets exhibits exceptional adsorption properties for O2 molecules. In addition, the single-crystal structure in the presence of surface defects significantly increases the separation and transport of photogenerated carriers, resulting in the effective activation of adsorbed O2 into superoxide radicals (•O2-). Subsequently, the positively charged phenylmethyl H is readily linked to the negatively charged superoxide radical anion, thereby activating the CH bond. This study offers a fresh perspective and valuable insights into the development of efficient molecular oxygen-activated photocatalysts and their application in the selective catalytic conversion of aromatic C(sp3)-H bonds.

An efficient method by combining different basis sets and SAPT levels

In symmetry-adapted perturbation theory (SAPT), accurate calculations on non-covalent interaction (NCI) for large complexes with more than 50 atoms are time-consuming using large basis sets. More efficient ones with smaller basis sets usually result in poor prediction in terms of dispersion and overall energies. In this study, we propose two composite methods with baseline calculated at SAPT2/aug-cc-pVDZ and SAPT2/aug-cc-pVTZ with dispersion term corrected at SAPT2+ level using bond functions and smaller basis set with δ MP2 corrections respectively. Benchmark results on representative NCI data sets, such as S22, S66, and so forth, show significant improvements on the accuracy compared to the original SAPT Silver standard and comparable to SAPT Gold standard in some cases with much less computational cost.

Electron regulation of CeO2 on CoP multi-shell hetero-junction micro-sphere towards highly efficient water oxidation

CeO2 has been identified as a significant cocatalyst to enhance the electrocatalytic activity of transition metal phosphides (TMPs). However, the electrocatalytic mechanism by which CeO2 enhances the catalytic activity of TMP remains unclear. In this study, we have successfully developed a unique CeO2-CoP-1-4 multishell microsphere heterostructure catalyst through a simple hydrothermal and calcination process. CeO2-CoP-1-4 exhibits great potential for electrocatalytic oxygen evolution reaction (OER), requiring only an overpotential of 254 mV to achieve a current density of 10 mA cm-2. Moreover, CeO2-CoP-1-4 demonstrates excellent operating durability lasting for 55 h. The presence of CeO2 as a cocatalyst can regulate the microsphere structure of CoP, the resulting multishell microsphere structure can shorten the mass transfer distance, and improve the utilization rate of the active site. Furthermore, in situ Raman and ex situ characterizations, and DFT theoretical calculation results reveal that CeO2 can effectively regulates the electronic structure of Co species, reduces the reaction free energy of rate-limiting step, thus increase the reaction kinetic. Overall, this study provides experimental and theoretical evidence to better comprehend the mechanism and structure evolution of CeO2 in enhancing the OER performance of CoP, offering a unique design inspiration for the development of efficient hollow heterojunction electrocatalysts.

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

In this work we present the development of an electrochemiluminescence aptasensor based on electrografting molybdenum disulphide nanosheets functionalized with diazonium salt (MoS2-N2+) upon screen-printed electrodes of graphene (SPEs GPH) for viral proteins detection. In brief, this aptasensor consists of SPEs GPH electrografted with MoS2-N2+ and modified with a thiolated aptamer, which can specifically recognize the target protein analyte. In this case, we have used SARS-CoV-2 spike protein as model protein. Electrochemiluminescence detection was performed by using the [Ru(bpy)3]2+/TPRA (tripropylamine) system, which allows the specific detection of the SARS-CoV-2 spike protein easily and rapidly with a detection limit of 9.74 fg/mL and a linear range from 32.5 fg/mL to 50.0 pg/mL. Moreover, the applicability of the aptasensor has been confirmed by the detection of the protein directly in human saliva samples. Comparing our device with a traditional saliva antigen test, our aptasensor can detect the spike protein even when the saliva antigen test gives a negative result.

Kinetic and stability studies of amino acid metal-organic frameworks for encapsulating of amino acid dehydrogenase

Zr-MOFs was applied for the immobilization of hyperthermophilic and halophilic amino acid dehydrogenase (Zr-MOFs-NTAaDH) by physical adsorption for the biosynthesis of L-homophenylalanine. Activity of Zr-MOFs-NTAaDH was enhanced by 3.3-fold of the free enzyme at 70°C. And the enzyme activity of Zr-MOFs-NTAaDH was maintained at 4.16 U/mg at pH 11, which was 7.8 folds of that of NTAaDH. Kinetic parameters indicated catalytic efficiency of Zr-MOFs-NTAaDH was increased compared to the free enzyme as kcat of Zr-MOFs-NTAaDH was 12.3-fold of that of free enzyme. After 7 recycles, the activity of Zr-MOFs-NTAaDH remained 68 %. And Zr-MOFs-NTAaDH exhibited high ionic liquid tolerance which indicated the great potential for industrial application.

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

An origami microfluidic paper device based on core-shell Cu@Cu2S@N-doped carbon hollow nanocubes

BACKGROUD

The global prevalence of diabetes mellitus, a serious chronic disease with fatal consequences for millions annually, is of utmost concern. The development of efficient and simple devices for monitoring glucose levels is of utmost significance in managing diabetes. The advancement of nanotechnology has resulted in the indispensable utilization of advanced nanomaterials in high-performance glucose sensors. Modulating the morphology and intricate composition of transition metals represents a viable approach to exploit their structure/function correlation, thereby achieving optimal electrocatalytic performance of the synthesized catalysts.

RESULTS

Herein, a sensitive and rapid Cu-encapsulated Cu2S@nitrogen-doped carbon (Cu@Cu2S@N-C) hollow nanocubes-functionalized microfluidic paper-based analytical device (μ-PAD) was fabricated. Through a delicate sacrificial template/interface technique and thermal decomposition, inter-connected hollow networks were formed to boost the active sites, and the carbon shell was coated to protect Cu from being oxidation. For application, the constructed μ-PAD is used for glucose sensing utilizing an origami automated sample pretreatment system enabled by a simple application of strong alkaline solution on wax paper. Under optimal circumstances, the Cu@Cu2S@N-C electrochemical biosensor exhibits broad detection range of 2-7500 μM (R2 = 0.996) with low detection limit of 0.16 μM (S/N = 3) and high sensitivity of 1996 μA mM-1 cm-2. Additionally, the constructed μ-PAD also exhibited excellent selectivity, stability, and reproducibility.

SIGNIFICANCE

By rationally designing the double-shell hollow nanostructure and introducing Cu-encapsulated inner layer, the synthesized Cu@Cu2S@N-C hollow nanocubes show large specific surface area, short diffusion channels, and high stability. The proposed origami μ-PAD has been successfully applied to serum samples without any additional sample preparation steps for glucose determination, offering a new perspective for early nonenzymatic glucose diagnosis.

A review of biocompatible polymer-functionalized two-dimensional materials: Emerging contenders for biosensors and bioelectronics applications

Bioelectronics, a field pivotal in monitoring and stimulating biological processes, demands innovative nanomaterials as detection platforms. Two-dimensional (2D) materials, with their thin structures and exceptional physicochemical properties, have emerged as critical substances in this research. However, these materials face challenges in biomedical applications due to issues related to their biological compatibility, adaptability, functionality, and nano-bio surface characteristics. This review examines surface modifications using covalent and non-covalent-based polymer-functionalization strategies to overcome these limitations by enhancing the biological compatibility, adaptability, and functionality of 2D nanomaterials. These surface modifications aim to create stable and long-lasting therapeutic effects, significantly paving the way for the practical application of polymer-functionalized 2D materials in biosensors and bioelectronics. The review paper critically summarizes the surface functionalization of 2D nanomaterials with biocompatible polymers, including g-C3N4, graphene family, MXene, BP, MOF, and TMDCs, highlighting their current state, physicochemical structures, synthesis methods, material characteristics, and applications in biosensors and bioelectronics. The paper concludes with a discussion of prospects, challenges, and numerous opportunities in the evolving field of bioelectronics.

SERS monitoring of methylene blue degradation by Au-Ag@Cu2O-rGO nanocomposite

A combination of multiple materials effectively improves and enhances the performance of the materials. Thus, a gold-silver@cuprous oxide (Au-Ag@Cu2O)-reduced graphene oxide (rGO) structure was designed and fabricated. We decorated the Au nanoparticles (NPs) on the Ag@Cu2O-rGO composite surface by a redox reaction to form a Au-Ag@Cu2O-rGO structure with two noble metals attached to a Cu2O semiconductor. A comparable Au-Ag@Cu2O structure was also fabricated. After decorating Au NPs into the Ag@Cu2O-rGO composite, the Au-Ag@Cu2O composite structure was loosened, and the surface and interior of the Cu2O shell were decorated with Au and Ag NPs. Moreover, the addition of Au NPs resulted in a proper surface plasmon resonance effect and a significant broadening of the absorption range. The loose structure increased the adsorption of the probe molecules, which increased the surface-enhanced Raman scattering (SERS) intensity. In addition, the fabricated Au-Ag@Cu2O-rGO exhibited excellent catalytic reduction of methylene blue (MB) with sodium borohydride (NaBH4). Therefore, the SERS-based monitoring of the MB degradation was obviously improved.

Three coordination polymers based on 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether: Synthesis, structure and selective fluorescent sensing properties

Three CPs [Zn2(PDA)2(BMIOPE)2·3H2O]n (1), [Co(Br-BDC)(BMIOPE)]n (2) and [Co(MIP)(BMIOPE)]n (3) were synthesized by solvothermal method based on dual-ligand strategy (H2PDA, Br-H2BDC, BMIOPE and H2MIP are 1,3-phenylenediacetic acid, 5-bromo-isophthalic acid, 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether and 5-methylisophthalic acid, respectively). Complexes 1 and 3 exhibit twofold parallel interwoven sql nets. Complex 2 is 2D layer structure. The luminescence property investigations showed that complexes 1-3 could act as multi-responsive fluorescent sensors to detect UO22+, Cr2O72- and CrO42- and nitrofurantoin (NFT) through fluorescence turn-off process, presenting excellent sensitivity and selectivity. Finally, the possible fluorescent quenching mechanisms of complexes 1-3 toward the above pollutants are also further investigated by employing spectroscopic methods and quantum chemical calculations. The fluorescence lifetime measurements manifest the mechanism of fluorescence quenching is static quenching process.

Near-infrared fluorescent indolizine-dicyanomethylene-4H-pyran hybrids for viscosity imaging in living cells

The development of near-infrared organic fluorescent dyes with tunable emission profiles is highly required in the field of biological sensing and imaging. In this paper, we designed and synthesized two organic fluorescent dyes, DCM-1 and DCM-2, through the hybridization of indolizine and dicyanomethylene-4H-pyran skeleton. These two compounds show near-infrared fluorescence with emission maximum approximately at 640 and 680 nm, respectively. Notably, both DCM-1 and DCM-2 have specific responses to viscosity without being interfered by biological relevant species. Cell experiments demonstrate that DCM-1 and DCM-2 can detect dynamic changes in viscosity within living cells, suggesting their potential applications in chemical biology research.

Pilot-scale electrochemical advanced oxidation (EAOP) system for the treatment of Ni-EDTA-containing wastewater

Electrochemical advanced oxidation processes (EAOP) have shown great potential for the abatement of complexed heavy metals, such as metal-EDTA complexes, in recent studies. While removal of metal-EDTA complexes has been extensively examined in bench-scale reactors, much less attention has been given to the efficacy of this process at larger scale. In this study, we utilize a 72 L pilot-scale continuous flow system comprised of six serpentine flow channels and 90 pairs of flow-through electrodes for the degradation of Ni-EDTA complexes and removal of Ni from solution. The influence of a range of key operating parameters including flow rate, current density and initial Ni-EDTA concentration on rate and extent of Ni-EDTA degradation and Ni removal were examined. Our results showed that at a feed flow rate of 36 L h-1, current density of 5 mA cm-2 and initial Ni-EDTA concentration of 1 mM, the pilot-scale system achieved 74 % total Ni removal, 78 % total EDTA removal and 40 % TOC removal with energy consumption of 13.6 kWh m-3 order-1 and energy efficiency of 7.9 g kWh-1 for total Ni removal. A mechanistically-based kinetic model, which was developed in our previous bench-scale study, provides a satisfactory description of the experimental results obtained in the pilot-scale unit. Long term operation of the pilot-scale unit resulted in corrosion of PbO2 anode along with inorganic scaling as well as organic fouling on the PbO2 surface resulting in an obvious decline in Ni-EDTA degradation. Overall, the results of this study suggest that large scale anodic oxidation of wastewaters containing metal-organic complexes is an effective means of degrading organic ligands thereby enabling removal of the metal at the cathode. However, additional efforts are required to enhance the durability of the anode material and reduce material costs and energy consumption.

Harmonic and anharmonic vibrational computations for biomolecular building blocks: Benchmarking DFT and basis sets by theoretical and experimental IR spectrum of glycine conformers

Advanced vibrational spectroscopic experiments have reached a level of sophistication that can only be matched by numerical simulations in order to provide an unequivocal analysis, a crucial step to understand the structure-function relationship of biomolecules. While density functional theory (DFT) has become the standard method when targeting medium-size or larger systems, the problem of its reliability and accuracy are well-known and have been abundantly documented. To establish a reliable computational protocol, especially when accuracy is critical, a tailored benchmark is usually required. This is generally done over a short list of known candidates, with the basis set often fixed a priori. In this work, we present a systematic study of the performance of DFT-based hybrid and double-hybrid functionals in the prediction of vibrational energies and infrared intensities at the harmonic level and beyond, considering anharmonic effects through vibrational perturbation theory at the second order. The study is performed for the six-lowest energy glycine conformers, utilizing available "state-of-the-art" accurate theoretical and experimental data as reference. Focusing on the most intense fundamental vibrations in the mid-infrared range of glycine conformers, the role of the basis sets is also investigated considering the balance between computational cost and accuracy. Targeting larger systems, a broad range of hybrid schemes with different computational costs is also tested.

Aqueous photolysis of naproxen exposed to UV and natural sunlight: Formation of excited triplet and photosensitizing product

Photochemical transformation is an important attenuation process for the non-steroidal anti-inflammatory drug naproxen (NPX) in both engineered and natural waters. Herein, we investigated the photolysis of NPX in aqueous solution exposed to both ultraviolet (UV, 254 nm) and natural sunlight irradiation. Results show that N2 purging significantly promoted NPX photolysis under UV irradiation, suggesting the formation of excited triplet state (3NPX*) as a critical transient. This inference was supported by benzophenone photosensitization and transient absorption spectra. Sunlight quantum yield of NPX was only one fourteenth of that under UV irradiation, suggesting the wavelength-dependence of NPX photochemistry. 3NPX* formed upon irradiation of NPX underwent photodecarboxylation leading to the formation of 2-(1-hydroxyethyl)-6-methoxynaphthalene (2HE6MN), 2-(1-hydroperoxyethyl)-6-methoxynaphthalene (2HPE6MN), and 2-acetyl-6-methoxynaphthalene (2A6MN). Notably, the conjugation and spin-orbit coupling effects of carbonyl make 2A6MN a potent triplet sensitizer, therefore promoting the photodegradation of the parent NPX. In hospital wastewater, the photolysis of NPX was influenced because the photoproduct 2A6MN and wastewater components could competitively absorb photons. Bioluminescence inhibition assay demonstrated that photoproducts of NPX exhibited higher toxicity than the parent compound. Results of this study provide new insights into the photochemical behaviors of NPX during UV treatment and in sunlit surface waters.

The potential of carbonic anhydrase enzymes as a novel target for anti-cancer treatment

Carbonic anhydrase (CA) is a zinc-dependent metal enzyme that maintains the pH and carbon dioxide (CO2) homeostasis in cells by catalyzing the reversible hydration and dehydration of CO2 and bicarbonate (HCO3-). In mammals, there are 16 isozymes of CA existed, namely CAI to CAXIV, but only 15 isozymes are found in humans except CAXV. Human CAs have highly conserved catalytic domains, all of which are distributed in different tissues and play important physiological roles. Changes in their functions may disrupt the typical distribution of CAs throughout human body and therefore CAs can be used as diagnostic biomarkers for many diseases. Furthermore, the expression of CAs is correlated to the progression of numerous tumors, therapeutic sensitivity and patient prognosis. In this review, we discuss thoroughly the structure of CAs, their functional activities in human physiology, dysregulations and diseases related to CAs, and different types of CA inhibitors that can reverse their dysregulation.

Iodide enhances degradation of histidine sidechain and imidazoles and forms new iodinated aromatic disinfection byproducts during chlorination

Peptide-bound histidines and imidazoles are important constituents of dissolved organic matter in water, and understanding the formation of halogenated disinfection byproduct (DBP) formation from these compounds during disinfection is important for ensuring a safe drinking water supply. Previous studies suggested that histidine has low reactivity with chlorine only; this study indicates that iodide substantially enhances histidine reactivity with the disinfectant at a time scale from days to hours. Mono- and di-iodinated histidines were identified as dominant transformation products with cumulative molar yields of 3.3 % at 6 h and they were stable in water over 7 days. These products were formed via electrophilic substitution of iodine to imidazole ring when hypoiodous acid reacted with histidine sidechain. Bromide minimally influenced the formation yields of these iodinated products, and higher pH increased yields up to 12 % for pH in the range 5-9. The cumulative concentration of low-molecular-weight DBPs, such as trihalomethanes and haloacetic acids, was less than 0.3 % under the same conditions. Similar iodinated imidazole analogs were also identified from other imidazoles (i.e., imidazole-carboxylic and phenyl-imidazole-carboxylic acids). This study demonstrated that peptide-bound histidine and imidazoles can serve as important precursors to iodinated aromatic DBPs, facilitating the identification of less-known iodinated DBPs.

Preparation of multifunctional PET membrane and its application in high-efficiency filtration and separation in complex environment

Nowadays, effluent treatment is a severe challenge mainly because of its complex composition, which includes oil, heavy metal ions, and dyes. Developing new intelligent membranes is one of the strategies to tackle these significant challenges in wastewater treatment. In this study, we fabricated asymmetric polyethylene glycol terephthalate (PET) membranes by grafting cross-linked poly (itaconic anhydride) (CL-PITA) nanoparticles onto the irradiated face. These nanoparticles were then functionalized with polyethyleneimine (PEI) and protonated with HCl to introduce numerous active electropositive amine groups. The fundamental purpose was to increase surface roughness, introduce numerous hydrophilic groups, and modify it to create a multi-functional PET membrane to separate complex environments. The promising results demonstrated that the protonated PET-g-ITA/DVB(10)-cat membrane exhibited excellent separation efficiencies (SE) for water/light oil, water/heavy oil and oil-in-water (O/W) emulsion. Compared to PET-g-ITA/DVB(0)-cat, it showed superior performance in SE for O/W emulsion and flux decay for water/light oil after 10 cycles. More interestingly, owing to numerous positively charged active amino groups and negativley charged carboxylate groups, the intelligent membrane exhibited a high removal rate of ca. 90 % for anionic dye (congo red) and heavy metals (Cu2+ and Co2+), showing great potential in complex water treatment environments.

Amplified and distinctive genotoxicity of titanium dioxide nanoparticles in transformed yeast reporters with human cytochrome P450 (CYP) genes

Titanium dioxide nanoparticles (nTiO2) have been considered a possible carcinogen to humans, but most existing studies have overlooked the role of human enzymes in assessing the genotoxicity of nTiO2. Here, a toxicogenomics-based in vitro genotoxicity assay using a GFP-fused yeast reporter library was employed to elucidate the genotoxic potential and mechanisms of nTiO2. Moreover, two new GFP-fused yeast reporter libraries containing either human CYP1A1 or CYP1A2 genes were constructed by transformation to investigate the potential modulation of nTiO2 genotoxicity in the presence of human CYP enzymes. This study found a lack of appreciable nTiO2 genotoxicity as indicated by the yeast reporter library in the absence of CYP expression but a significantly elevated indication of genotoxicity in either CYP1A1- or CYP1A2-expressing yeast. The intracellular reactive oxygen species (ROS) measurement indicated significantly higher ROS in yeast expressing either enzyme. The detected mitochondrial DNA damage suggested mitochondria as one of the target sites for oxidative damage by nTiO2 in the presence of either one of the CYP enzymes. The results thus indicated that the genotoxicity of nTiO2 was enhanced by human CYP1A1 or CYP1A2 enzyme and was associated with elevated oxidative stress, which suggested that the similar mechanisms could occur in human cells.

Cyclodextrin-based metal-organic frameworks transforming drug delivery

Cyclodextrin-based metal-organic frameworks (CD-MOFs) are gaining traction in the realm of drug delivery due to their inherent versatility and potential to amplify drug efficacy, specificity, and safety. This article explores the predominant preparation techniques for CD-MOFs, encompassing methods like vapor diffusion, microwave-assisted, and ultrasound hydrothermal approaches. Native CD-MOFs present compelling advantages in drug delivery applications. They can enhance drug loading capacity, stability, solubility, and bioavailability by engaging in diverse interactions with drugs, including host-guest, hydrogen bonding, and electrostatic interactions. Beyond their inherent properties, CD-MOFs can be customized as drug carriers through two primary strategies: co-crystallization with functional components and surface post-modifications. These tailored modifications pave the way for controlled release manners. They allow for slow and sustained drug release, as well as responsive releases triggered by various factors such as pH levels, glutathione concentrations, or specific cations. Furthermore, CD-MOFs facilitate targeted delivery strategies, like pulmonary or laryngeal delivery, enhancing drug delivery precision. Overall, the adaptability and modifiability of CD-MOFs underscore their potential as a versatile platform for drug delivery, presenting tailored solutions that cater to diverse biomedical and industrial needs.

DprE1 and Ddn as promising therapeutic targets in the development of novel anti-tuberculosis nitroaromatic drugs

Tuberculosis remains the second deadliest infectious disease in humans and a public health threat due to the emergence of multidrug-resistant (MDR-TB) and extensively drug-resistant (XDR-TB) strains. Therefore, it is urgent to identify new anti-tuberculosis treatments and novel therapeutic targets to prevent the emergence of resistance. In recent years, the study of anti-tuberculosis properties of nitroaromatic compounds has led to the identification of two novel biological targets, the deazaflavin (F420)-dependent nitroreductase Ddn and the decaprenylphosphoryl-β-d-ribose 2'-epimerase DprE1. This review aims to show why Ddn and DprE1 are promising therapeutic targets and highlight nitroaromatic compounds interest in developing new anti-tuberculosis treatments active against MDR-TB and XDR-TB. Despite renewed interest in the development of new anti-tuberculosis nitroaromatic compounds, pharmaceutical companies often exclude nitro-containing molecules from their drug discovery programs because of their toxic and mutagenic potential. This exclusion results in missed opportunities to identify new nitroaromatic compounds and promising therapeutic targets.

A sustainable, eco-friendly Tb/Eu-modified HOFs for ultrasensitive detection and efficient adsorption of carcinogens in complex water environments

Developing a multifunctional material that can detect and remove carcinogens in water environments, simultaneously monitor their toxic metabolites in living organisms is significant for environmental remediation and human health. However, most research only focused on detection or adsorption carcinogens due to the difficulty of integrating multiple functions into one material, let alone monitoring their toxic metabolites. Here, a multifunctional Tb/Eu@TATB-HOF (1) is first developed to monitor two carcinogens, malachite green (MG) and its metabolites leucomalachite green (LMG), and simultaneously remove MG from the contaminated water. 1, as the dual-emission fluorescence sensor, can achieve ultrasensitive and highly visualized sensing for MG and LMG with different response modes. Even in actual samples, 1 still exhibits satisfactory sensing performances. As the adsorbent, 1 displays good recyclability and high adsorption capacity for MG. The sensing and adsorption mechanisms are explored through experiments and theoretical calculations. This work not only provides a novel insight for environmental remediation and human health through detection and removal of carcinogens, simultaneously monitoring their toxic metabolites, but first reveals the enormous potential of HOFs as multifunctional materials simultaneously for fluorescence sensing and adsorption.

Nitroxyl donating and visualization with a coumarin-based fluorescence probe

Nitroxyl (HNO), the single-electron reduction product of nitric oxide (NO), has attracted great interest in the treatment of congestive heart failure in clinical trials. In this paper, we describe the first coumarin-based compound N-hydroxy-2-oxo-2H-chromene-6-sulfonamide (CD1) as a dualfunctional HNO donor, which can release both an HNO signaling molecule and a fluorescent reporter. Under physiological conditions (pH 7.4 and 37 °C), the CD1 HNO donor can readily decompose with a half-life of ∼90 min. The corresponding stoichiometry HNO from the CD1 donor was confirmed using both Vitamin B12 and phosphine compound traps. In addition to HNO releasing, specifically, the degradation product 2-oxo-2H-chromene-6-sulfinate (CS1) was generated as a fluorescent marker during the decomposition. Therefore, the HNO amount released in situ can be accurately monitored through fluorescence generation. As compared to the CD1 donor, the fluorescence intensity increased by about 4.9-fold. The concentration limit of detection of HNO releasing was determined to be ∼0.13 μM according to the fluorescence generation of CS1 at physiological conditions. Moreover, the bioimaging of the CD1 donor was demonstrated in the cell culture of HeLa cells, where the intracellular fluorescence signals were observed, inferring the site of HNO release. Finally, we anticipate that this novel coumarin-based CD1 donor opens a new platform for exploring the biology of HNO.

Biodegradation of bisphenol A by a Pichia pastoris whole-cell biocatalyst with overexpression of laccase from Bacillus pumilus and investigation of its potential degradation pathways

Bisphenol A (BPA), an endocrine disrupter with estrogen activity, can infiltrate animal and human bodies through the food chain. Enzymatic degradation of BPA holds promise as an environmentally friendly approach while it is limited due to lower stability and recycling challenges. In this study, laccase from Bacillus pumilus TCCC 11568 was expressed in Pichia pastoris (fLAC). The optimal catalytic conditions for fLAC were at pH 6.0 and 80 °C, with a half-life T1/2 of 120 min at 70 °C. fLAC achieved a 46 % degradation rate of BPA, and possible degradation pathways were proposed based on identified products and reported intermediates of BPA degradation. To improve its stability and degradation capacity, a whole-cell biocatalyst (WCB) was developed by displaying LAC (dLAC) on the surface of P. pastoris GS115. The functionally displayed LAC demonstrated enhanced thermostability and pH stability along with an improved BPA degradation ability, achieving a 91 % degradation rate. Additionally, dLAC maintained a degradation rate of over 50 % after the fourth successive cycles. This work provides a powerful catalyst for degrading BPA, which might decontaminate endocrine disruptor-contaminated water through nine possible pathways.

Construction of an antidepressant priority list based on functional, environmental, and health risks using an interpretable mixup-transformer deep learning model

As emerging pollutants, antidepressants (AD) must be urgently investigated for risk identification and assessment. This study constructed a comprehensive-effect risk-priority screening system (ADRank) for ADs by characterizing AD functionality, occurrence, persistence, bioaccumulation and toxicity based on the integrated assignment method. A classification model for ADs was constructed using an improved mixup-transformer deep learning method, and its classification accuracy was compared with those of other models. The accuracy of the proposed model improved by up to 23.25 % compared with the random forest model, and the reliability was 80 % more than that of the TOPSIS method. A priority screening candidate list was proposed to screen 33 high-priority ADs. Finally, SHapley Additive explanation (SHAP) visualization, molecular dynamics, and amino acid analysis were performed to analyze the correlation between AD structure and toxic receptor binding characteristics and reveal the differences in AD risk priority. ADs with more intramolecular hydrogen bonds, higher hydrophobicity, and electronegativity had a more significant risk. Van der Waals and electrostatic interactions were the primary influencing factors, and significant differences in the types and proportions of the main amino acids in the interaction between ADs and receptors were observed. The results of the study provide constructive schemes and insights for AD priority screening and risk management.

Homo and heteromultimetallic complexes containing a group 8 transition metal and μ-diphosphine bridging ligands involved in anticancer research: A review

Herein, we present a comprehensive review focusing on synthetic strategies, detailed structural analysis, and anticancer activity investigations of complexes following the general formula [LnM(μ-diphosphine)M'Lm] where M = group 8 metal; M' = any transition metal; μ-diphosphine = bridging ligand; Ln and Lm = ligand spheres). Both homo- and heteromultimetallic complexes will be discussed in detail. We review in vitro, in vivo and in silico anticancer activity investigations, in an attempt to draw comparisons between the various complexes and derive structure-activity relationships (SAR). This review solely focuses on complexes falling under the general formula stated above that have been studied for their anticancer activities, other complexes falling into that scheme but which have not undergone anticancer testing are not included in this review. We compare the anticancer activities of these complexes to their mononuclear counterparts, and a positive control (cisplatin) when possible and present a summary of all existing data to date and attempt to draw some conclusions on the future development of these complexes.

Quasi-intrinsic thiobase derivatives as potential targeted photosensitizers in two-photon photodynamic therapy

In this study, a set of potential quasi-intrinsic photosensitizers for two-photon photodynamic therapy (PDT) are proposed based on the unnatural 2-amino-8-(1'-β-ᴅ-2'-deoxyribofuranosyl)-imidazo[1,2-ɑ]-1,3,5-triazin-4(8H)-one (P), which is paired with the 6-amino-5-nitro-3-(1'-β-ᴅ-2'-deoxyribofuranosyl)-2(1H)-pyridone (Z) and can specifically recognize breast and liver cancer cells. Herein, the effects of sulfur substitution and electron-donating/electron-withdrawing groups on the photophysical properties in aqueous solution are systematically investigated. The one- and two-photon absorption spectra evidence that the modifications could result in red-shifted absorption wavelength and large two-photon absorption cross-section, which contributes to selective excitation and provides effective PDT for deep-seated tissues. To ensure the efficient triplet state population, the singlet-triplet energy gaps and spin-orbit coupling constants were examined, which is responsible for a rapid intersystem crossing rate. Furthermore, these thiobase derivatives are characterized by the long-lived T1 state and the large energy gap for radiationless transition to ensure the generation of cytotoxic singlet oxygen.

Semi-quantitative and visual detection of Cu2+ and glyphosate in real samples and living cells using fluorescent and colorimetric dual-signals peptide-based probe

The excessive emission of copper ions (Cu2+) and the abuse of glyphosate (Glyp) have caused serious harm to the ecological environment and human health, so it is important to develop a fast and convenient method for the analysis of Cu2+ and glyphosate to ensure environmental and food safety. Herein, a dual-signals peptide-based probe (FASRH) with fluorescent and colorimetric was prepared using 5-carboxyl fluorescein modified tetrapeptide (Ala-Ser-Arg-His-NH2). FASRH was successfully used to recognize Cu2+ as a fluorescence "on-off" probe, forming the FASRH-Cu2+ complex with non-fluorescence. As a new promising cascade probe, FASRH-Cu2+ complex probe has high selectivity (only Glyp), good sensitivity (50.2 nM), good anti-interference ability and wide pH range (7.0-11.0) for the detection of glyphosate by ligand replacement method. In addition, the recognizable color changed markedly under 365 nm UV light and natural light. Notably, FASRH not only achieved accurate monitoring of Cu2+ and glyphosate in two real water samples, but also successfully applied to detect Cu2+ and glyphosate in live Hacat cells based on low cytotoxicity. Moreover, it is worth noting that FASRH-impregnated test strips exhibited significant fluorescence and colorimetric color changes for Cu2+ and glyphosate via naked eye. Furthermore, smartphone-assisted FASRH was used for the portable detection of Cu2+ and glyphosate based on the advantages of simplicity, low cost and fast response.

Ultrasonic treatment of endocrine disrupting compounds, pharmaceuticals, and personal care products in water: An updated review

Pharmaceuticals, personal care products (PPCPs), and endocrine-disrupting compounds (EDCs) have seen a recent sustained increase in usage, leading to increasing discharge and accumulation in wastewater. Conventional water treatment and disinfection processes are somewhat limited in effectively addressing this micropollutant issue. Ultrasonication (US), which serves as an advanced oxidation process, is based on the principle of ultrasound irradiation, exposing water to high-frequency waves, inducing thermal decomposition of H2O while using the produced radicals to oxidize and break down dissolved contaminants. This review evaluates research over the past five years on US-based technologies for the effective degradation of EDCs and PPCPs in water and assesses various factors that can influence the removal rate: solution pH, temperature of water, presence of background common ions, natural organic matter, species that serve as promoters and scavengers, and variations in US conditions (e.g., frequency, power density, and reaction type). This review also discusses various types of carbon/non-carbon catalysts, O3 and ultraviolet processes that can further enhance the degradation efficiency of EDCs and PPCPs in combination with US processes. Furthermore, numerous types of EDCs and PPCPs and recent research trends for these organic contaminants are considered.

The autoxidation of polyether-polyurethane open cell soft foam: An analytical aging method to reproducibly determine VOC emissions caused by thermo-oxidative degradation

We present a new method for investigating the oxidation and emission behavior of air-permeable materials. Employing this method, a differentiated statement can be made about the extent to which critical volatile organic compounds (VOCs) such as formaldehyde, acetaldehyde, and acrolein are contained in the material as impurities or formed by thermo-oxidative degradation of the polymer matrix in the use phase. The parameters affecting methods of VOC analysis are reviewed and considered for the developed method. The molecular mechanisms of VOC formation are discussed. Toxicological implications of the reaction kinetics are put into context with international guidelines and threshold levels. This new method enables manufacturers of cellular materials not only to determine the oxidative stability of their products but also to optimize them specifically for higher durability. ENVIRONMENTAL IMPLICATION: Cellular materials are ubiquitous in the technosphere. They play a crucial role in various microenvironments such as automotive interiors, building insulation, and cushioning. These materials are susceptible to oxidative breakdown, leading to the release of formaldehyde, acetaldehyde, and acrolein. The ecotoxicological profiles of these compounds necessitate monitoring and regulation. The absence of reproducible and reliable analytical methods restricts research and development aimed at risk assessment and mitigation. This work significantly enhances the toolbox for optimizing the oxidative stability of any open-cell cellular material and evaluating these materials in terms of their temperature-dependent oxidation and emission behavior.

Ferrocene-modified half-sandwich iridium(III) and ruthenium(II) propionylhydrazone complexes and anticancer application

Ferrocene, ruthenium(II) and iridium(III) organometallic complexes, potential substitutes for platinum-based drugs, have shown good application prospects in the field of cancer therapy. Therefore, in this paper, six ferrocene-modified half-sandwich ruthenium(II) and iridium(III) propionylhydrazone complexes were prepared, and the anticancer potential was evaluated and compared with cisplatin. These complexes showed potential in-vitro anti-proliferative activity against A549 cancer cells, especially for Ir-based complexes, and showing favorable synergistic anticancer effect. Meanwhile, these complexes showed little cytotoxicity and effective anti-migration activity. Ir3, the most active complex (ferrocene-appended iridium(III) complex), could accumulate in the intracellular mitochondria, disturb the cell cycle (S-phase), induce the accumulation of reactive oxygen species, and eventually cause the apoptosis of A549 cells. Then, the design of these complexes provides a good structural basis for the multi-active non‑platinum organometallic anticancer complexes.

Aging of the eye: Lessons from cataracts and age-related macular degeneration

Aging is the greatest risk factor for chronic human diseases, including many eye diseases. Geroscience aims to understand the effects of the aging process on these diseases, including the genetic, molecular, and cellular mechanisms that underlie the increased risk of disease over the lifetime. Understanding of the aging eye increases general knowledge of the cellular physiology impacted by aging processes at various biological extremes. Two major diseases, age-related cataract and age-related macular degeneration (AMD) are caused by dysfunction of the lens and retina, respectively. Lens transparency and light refraction are mediated by lens fiber cells lacking nuclei and other organelles, which provides a unique opportunity to study a single aging hallmark, i.e., loss of proteostasis, within an environment of limited metabolism. In AMD, local dysfunction of the photoreceptors/retinal pigmented epithelium/Bruch's membrane/choriocapillaris complex in the macula leads to the loss of photoreceptors and eventually loss of central vision, and is driven by nearly all the hallmarks of aging and shares features with Alzheimer's disease, Parkinson's disease, cardiovascular disease, and diabetes. The aging eye can function as a model for studying basic mechanisms of aging and, vice versa, well-defined hallmarks of aging can be used as tools to understand age-related eye disease.

Discovery of 5-(1-benzyl-1H-imidazol-4-yl)-1,2,4-oxadiazole derivatives as novel RIPK1 inhibitors via structure-based virtual screening

RIPK1 plays a key role in necroptosis and is associated with various inflammatory diseases. Using structure-based virtual screening, a novel hit with 5-(1-benzyl-1H-imidazol-4-yl)-1,2,4-oxadiazole scaffold was identified as an RIPK1 inhibitor with an IC50 value of 1.3 μM. Further structure-activity relationship study was performed based on similarity research and biological evaluation. The molecular dynamics simulation of compound 2 with RIPK1 indicated that it may act as a type II kinase inhibitor. This study provides a highly efficient way to discover novel scaffold RIPK1 inhibitors for further development.