Promises, facts and challenges for graphene in biomedical applications

Alkynylation of graphene via the Sonogashira C-C cross-coupling reaction on fluorographene

We report successful grafting of alkynyl groups onto graphene via the Sonogashira reaction between fluorographene and terminal alkynes.

We report successful grafting of alkynyl groups onto graphene via the Sonogashira reaction between fluorographene and terminal alkynes. Theoretical calculations revealed that fluorographene can efficiently bind and oxidize the palladium catalyst on electrophilic sites activated by fluorine atoms. This paves the way towards conductive and mechanically robust 3D covalent networks.

Efficiency of nanoparticle reinforcement using finite element analysis of titanium alloy mandible plate

Nanoparticles in the form nanotubes and nanoplatelets have been compared for von Mises stresses by using them as low-composition reinforcements in titanium alloy-based mandible plate for different compositions and orientations. A finite element model has been designed to reconstruct a fractured human mandible with a titanium alloy mandible plate. A 500 N compressive force was applied on the mandible, and stress distribution across the plate sections was analysed for aligned two-dimensional random and three-dimensional random orientations for both tubes and platelets. Carbon material as graphene has been used for tube and platelet in the form of nanotubes and nanoplatelets, respectively. Using properties of graphene as the filler in titanium alloy plate, for both nanoplatelets and nanotubes, the stresses reduced between 5% and 25% for nanoplatelets and nanotubes graphene-titanium composite plates in comparison to non-reinforced plates, at critically stressed sections. Nanotubes exhibited stress reduction of nearly 23.4% for aligned configurations, while nanoplatelets exhibited stress reduction up to 21.2% for two-dimensional and three-dinemsional random configurations in comparison to non-reinforced titanium plates. Hence, it has been suggested that nanotubes exhibited superior mechanical reinforcement potential beyond that of aligned nanoplatelets, while nanoplatelets provided enhanced mechanical reinforcements for random configurations. Therefore, for biomedical implant applications nanocomposite materials can be designed with the same dimensional form but with lower compositions of filler materials by simply manipulating the appropriate orientations.

The design, fabrication, and applications of flexible biosensing devices

Flexible biosensors form part of a rapidly growing research field that take advantage of a multidisciplinary approach involving materials, fabrication and design strategies to be able to function at biological interfaces that may be soft, intrinsically curvy, irregular, or elastic. Numerous exciting advancements are being proposed and developed each year towards applications in healthcare, fundamental biomedical research, food safety and environmental monitoring. In order to place these developments in perspective, this review is intended to present an overview on field of flexible biosensor development. We endeavor to show how this subset of the broader field of flexible and wearable devices presents unique characteristics inherent in their design. Initially, a discussion on the structure of flexible biosensors is presented to address the critical issues specific to their design. We then summarize the different materials as substrates that can resist mechanical deformation while retaining their function of the bioreceptors and active elements. Several examples of flexible biosensors are presented based on the different environments in which they may be deployed or on the basis of targeted biological analytes. Challenges and future perspectives pertinent to the current and future stages of development are presented. Through these summaries and discussion, this review is expected to provide insights towards a systematic and fundamental understanding for the fabrication and utilization of flexible biosensors, as well as inspire and improve designs for smart and effective devices in the future.

Finite element analysis of titanium alloy-graphene based mandible plate

Titanium alloy based maxillofacial plates and implants are widely used in fracture treatment and reconstructions. Filler materials Graphene Nanoplatlets(GNPs) were used in a Titanium alloy maxillofacial plate and a Finite Element Model (FEM) was designed to reconstruct a fractured human mandible. Both 50N and 500N bite forces were applied on the mandible and stress distribution using Von mises failure theory across the plate sections was analyzed. A pure plate was critically stressed at a section near the mandible fracture region for a Von mises stress of nearly 27.5GPa while this stress reduced by nearly 10-22% with the presence of minor composition of GNPs in the plate. GNPs orientation in parallel (21.1 GPa) to the plate axis were more effective in comparison to other orientations(90°, 45° and 135°) and the location variation of these GNPs along the plate had no significant effect on the stress distribution. The fatigue analyses showed that, under these stresses and forces the plate with GNP was able to endure for nearly 7000 days, while the pure Titanium plate could fail by fatigue in approximately 70 days. Hence, presence of minor compositions of GNPs could enhance endurance life of the Titanium plate by reducing stress concentrations at critical sections of the plate.

SS, Paggi M, Bordas SP. Advances in Carbon Based Nanomaterials for Bio-Medical Applications

:

The unique mechanical, electrical, thermal, chemical and optical properties of carbon based nanomaterials (CBNs) like: Fullerenes, Graphene, Carbon nanotubes, and their derivatives made them widely used materials for various applications including biomedicine. Few recent applications of the CBNs in biomedicine include: cancer therapy, targeted drug delivery, bio-sensing, cell and tissue imaging and regenerative medicine. However, functionalization renders the toxicity of CBNs and makes them soluble in several solvents including water, which is required for biomedical applications. Hence, this review represents the complete study of development in nanomaterials of carbon for biomedical uses. Especially, CBNs as the vehicles for delivering the drug in carbon nanomaterials is described in particular. The computational modeling approaches of various CBNs are also addressed. Furthermore, prospectus, issues and possible challenges of this rapidly developing field are highlighted.

Superparamagnetic nanoarchitectures for disease-specific biomarker detection

Synthesis, bio-functionalization, and multifunctional activities of superparamagnetic-nanostructures have been extensively reviewed with a particular emphasis on their uses in a range of disease-specific biomarker detection and associated challenges.

Graphene-based advanced nanoplatforms and biocomposites from environmentally friendly and biomimetic approaches

Environmentally friendly and biomimetic approaches to fabricate graphene-based advanced nanoplatforms and biocomposites for biomedical applications are summarized in this review.

Emerging two-dimensional monoelemental materials (Xenes) for biomedical applications

This review summarizes the emerging two-dimensional (2D) monoelemental materials (Xenes) with unique 2D structures and their fascinating properties and showcases their potential in biomedical applications.

Stabilization of aqueous graphene dispersions utilizing a biocompatible dispersant: a molecular dynamics study

Investigation of the high efficiency of flavin mononucleotide sodium salt (FMNS) for the stabilization of aqueous graphene dispersions using all-atom molecular dynamics simulations.

Graphene oxide and carbon dots as broad-spectrum antimicrobial agents - a minireview

Due to the increasing global population, growing contamination of water and air, and wide spread of infectious diseases, antibiotics are extensively used as a major antibacterial drug. However, many microbes have developed resistance to antibiotics through mutation over time. As an alternative to antibiotics, antimicrobial nanomaterials have attracted great attention due to their advantageous properties and unique mechanisms of action toward microbes. They inhibit bacterial growth and destroy cells through complex mechanisms, making it difficult for bacteria to develop drug resistance, though some health concerns related to biocompatibility remain for practical applications. Among various antibacterial nanomaterials, carbon-based materials, especially graphene oxide (GO) and carbon dots (C-Dots), are promising candidates due to the ease of production and functionalization, high dispersibility in aqueous media, and promising biocompatibility. The antibacterial properties of these nanomaterials can be easily adjusted by surface modification. They are promising materials for future applications against multidrug-resistant bacteria based on their strong capacity in disruption of microbial membranes. Though many studies have reported excellent antibacterial activity of carbon nanomaterials, their impact on the environment and living organisms is of concern due to the accumulatory and cytotoxic effects. In this review, we discuss antimicrobial applications of the functional carbon nanomaterials (GO and C-Dots), their antibacterial mechanisms, factors affecting antibacterial activity, and concerns regarding cytotoxicity.

A Systematic Review and Critical Analysis of the Role of Graphene-Based Nanomaterialsin Cancer Theranostics

Many graphene-based materials (GBNs) applied to therapy and diagnostics (theranostics) in cancer have been developed. Most of them are hybrid combinations of graphene with other components (e.g, drugs or other bioactives, polymers, and nanoparticles) aiming toward a synergic theranostic effect. However, the role of graphene in each of these hybrids is sometimes not clear enough and the synergic graphene effect is not proven. The objective of this review is to elaborate on the role of GBNs in the studies evaluated and to compare the nanoformulations in terms of some of their characteristics, such as therapeutic outcomes and toxicity, which are essential features for their potential use as bionanosystems. A systematic review was carried out using the following databases: PubMed, Scopus, and ISI Web of Science (2013⁻2018). Additional studies were identified manually by consulting the references list of relevant reviews. Only English papers presenting at least one strategy for cancer therapy and one strategy for cancer diagnostics, and that clearly show the role of graphene in theranostics, were included. Data extraction and quality assessment was made by reviewer pairings. Fifty-five studies met the inclusion criteria, but they were too heterogeneous to combine in statistical meta-analysis. Critical analysis and discussion of the selected papers are presented.

Three-Dimensional Graphene Foams: Synthesis, Properties, Biocompatibility, Biodegradability, and Applications in Tissue Engineering

Presently, clinical nanomedicine and nanobiotechnology have impressively demanded the generation of new organic/inorganic analogues of graphene (as one of the intriguing biomedical research targets) for stem-cell-based tissue engineering. Among different shapes of graphene, three-dimensional (3D) graphene foams (GFs) are highly promising candidates to provide conditions for mimicking in vivo environments, affording effective cell attachment, proliferation,and differentiation due to their unique properties. These include the highest biocompatibility among nanostructures, high surface-to-volume ratio, 3D porous structure (to provide a homogeneous/isotropic growth of tissues), highly favorable mechanical characteristics, and rapid mass and electron transport kinetics (which are required for chemical/physical stimulation of differentiated cells). This review aims to describe recent and rapid advances in the fabrication of 3D GFs, together with their use in tissue engineering and regenerative nanomedicine applications. Moreover, we have summarized a broad range of recent studies about the behaviors, biocompatibility/toxicity,and biodegradability of these materials, both in vitro and in vivo. Finally, the highlights and challenges of these 3D porous structures, compared to the current polymeric scaffold competitors, are discussed.

Platelets and their biomimetics for regenerative medicine and cancer therapies

Platelets, circulating blood cells derived from megakaryocytes, play a key role in various physical activities, including coagulation, hemostasis, the body's innate immune response, and cancer metastasis. By taking advantage of their key traits, researchers have developed strategies to exploit platelets and platelet-mimicking nanoassemblies to treat a number of conditions, including wounds, cancers, and bacterial infections. Compared to traditional polymer, lipsosome, and inorganic nanoparticles-based delivery systems, platelets and platelet-mimicking vehicles hold many advantages. Among these are their enhanced circulation time, their large volumes and surface areas for drug loading or conjugation, and their inherent ability to target some diseases. In this review, we will highlight the recent progress made in the development of disease-targeting platelets- and platelet-mimicking-vehicles as therapeutic platforms.

Safety Assessment of Graphene-Based Materials: Focus on Human Health and the Environment

Graphene and its derivatives are heralded as "miracle" materials with manifold applications in different sectors of society from electronics to energy storage to medicine. The increasing exploitation of graphene-based materials (GBMs) necessitates a comprehensive evaluation of the potential impact of these materials on human health and the environment. Here, we discuss synthesis and characterization of GBMs as well as human and environmental hazard assessment of GBMs using in vitro and in vivo model systems with the aim to understand the properties that underlie the biological effects of these materials; not all GBMs are alike, and it is essential that we disentangle the structure-activity relationships for this class of materials.

[Research progress of graphene and its derivatives in repair of peripheral nerve defect]

Objective

To review the research progress of graphene and its derivatives in repair of peripheral nerve defect.

Methods

The related literature of graphene and its derivatives in repair of peripheral nerve defect in recent years was extensively reviewed.

Results

It is confirmed by in vitro and in vivo experiments that graphene and its derivatives can promote cell adhesion, proliferation, differentiation and neurite growth effectively. They have good electrical conductivity, excellent mechanical properties, larger specific surface area, and other advantages when compared with traditional materials. The three-dimensional scaffold can improve the effect of nerve repair.

Conclusion

The metabolic pathways and long-term reaction of graphene and its derivatives in the body are unclear. How to regulate their biodegradation and explain the electric coupling reaction mechanism between cells and materials also need to be further explored.

Supramolecular chemotherapy based on host-guest molecular recognition: a novel strategy in the battle against cancer with a bright future

Chemotherapy is currently one of the most effective ways to treat cancer. However, traditional chemotherapy faces several obstacles to clinical trials, such as poor solubility/stability, non-targeting capability and uncontrollable release of the drugs, greatly limiting their anticancer efficacy and causing severe side effects towards normal tissues. Supramolecular chemotherapy integrating non-covalent interactions and traditional chemotherapy is a highly promising candidate in this regard and can be appropriately used for targeted drug delivery. By taking advantage of supramolecular chemistry, some limitations impeding traditional chemotherapy for clinical applications can be solved effectively. Therefore, we present here a review summarizing the progress of supramolecular chemotherapy in cancer treatment based on host-guest recognition and provide guidance on the design of new targeting supramolecular chemotherapy combining diagnostic and therapeutic functions. Based on a large number of state-of-the-art studies, our review will advance supramolecular chemotherapy on the basis of host-guest recognition and promote translational clinical applications.

Cellular Signaling Pathways Activated by Functional Graphene Nanomaterials

The paper reviews the network of cellular signaling pathways activated by Functional Graphene Nanomaterials (FGN) designed as a platform for multi-targeted therapy or scaffold in tissue engineering. Cells communicate with each other through a molecular device called signalosome. It is a transient co-cluster of signal transducers and transmembrane receptors activated following the binding of transmembrane receptors to extracellular signals. Signalosomes are thus efficient and sensitive signal-responding devices that amplify incoming signals and convert them into robust responses that can be relayed from the plasma membrane to the nucleus or other target sites within the cell. The review describes the state-of-the-art biomedical applications of FGN focusing the attention on the cell/FGN interactions and signalosome activation.

The Yin and Yang of carbon nanomaterials in atherosclerosis

With unique characteristics such as high surface area, capacity of various functionalization, low weight, high conductivity, thermal and chemical stability, and free radical scavenging, carbon nanomaterials (CNMs) such as carbon nanotubes (CNTs), fullerene, graphene (oxide), carbon nanohorns (CNHs), and their derivatives have increasingly been utilized in nanomedicine and biomedicine. On the one hand, owing to ever-increasing applications of CNMs in technological and industrial fields as well as presence of combustion-derived CNMs in the ambient air, the skepticism has risen over the adverse effects of CNMs on human being. The influences of CNMs on cardiovascular system and cardiovascular diseases (CVDs) such as atherosclerosis, of which consequences are ischemic heart disease and ischemic stroke, as the main causes of death, is of paramount importance. In this regard, several studies have been devoted to specify the biomedical applications and cardiovascular toxicity of CNMs. Therefore, the aim of this review is to specify the roles and applications of various CNMs in atherosclerosis, and also identify the key role playing parameters in cardiovascular toxicity of CNMs so as to be a clue for prospective deployment of CNMs.

Functionalized reduced graphene oxide as a lateral flow immuneassay label for one-step detection of Escherichia coli O157:H7

In this study, graphene oxide (GO) and reduced graphene oxide (rGO) were used as visual labels in a lateral flow assay for detection of E. coli O157:H7. The color intensity was employed for the quantitative measurements of the target bacteria. Quantitative results showed that in comparison to GO, rGO can provide higher color intensity owing to enhanced light absorption following chemical reduction. Our results confirm that the visual limit of detection of the target bacteria by rGO is ∼10⁵ colony forming unit per milliliter (CFU/ml), which closely compares with current alternative techniques using gold nanoparticles. The performance and practicability of the rGO-based test strips for detection of the target bacteria in milk and drinking water were validated with conventional plating and colony counting techniques. Results suggest that the proposed lateral flow assay is sensitive, specific, and affordable. It has also the potential to become a widely used detection technique for E. coli O157:H7 and a wide variety of other analytes.

Endotoxin-Free Preparation of Graphene Oxide and Graphene-Based Materials for Biological Applications

Due to their two-dimensional structure and unique properties, graphene and its derivatives have been extensively studied for their potential applications in various fields ranging from electronics to composites. Particularly, their high surface area, electrical conductivity, mechanical strength, dispersability in aqueous phase, and possibility of surface modification make them promising candidates for biomedical applications including biosensing, drug delivery, tissue engineering, cell imaging, and therapeutics. The functioning of graphene nanosheets in these applications is dependent on their structure and properties, which are mainly determined by their preparation and processing methods. Exfoliation techniques are the most common methods for preparation of graphene nanosheets for biomedical applications due to their high yield and scalability. Further modification of these methods is necessary to produce biocompatible and toxin-free graphene that can be safely incorporated into biological media. Here, we describe protocols for chemical and mechanical exfoliation of graphite to produce endotoxin-free and highly stable graphene oxide and graphene dispersions. Additional protocols are provided for proper pre- and post-processing of nanosheets and endotoxin measurement techniques. © 2018 by John Wiley & Sons, Inc.

Insights into 2D MXenes for Versatile Biomedical Applications: Current Advances and Challenges Ahead

Great and interdisciplinary research efforts have been devoted to the biomedical applications of 2D materials because of their unique planar structure and prominent physiochemical properties. Generally, ceramic-based biomaterials, fabricated by high-temperature solid-phase reactions, are preferred as bone scaffolds in hard tissue engineering because of their controllable biocompatibility and satisfactory mechanical property, but their potential biomedical applications in disease theranostics are paid much less attention, mainly due to their lack of related material functionalities for possibly entering and circulating within the vascular system. The emerging 2D MXenes, a family of ultrathin atomic nanosheet materials derived from MAX phase ceramics, are currently booming as novel inorganic nanosystems for biologic and biomedical applications. The metallic conductivity, hydrophilic nature, and other unique physiochemical performances make it possible for the 2D MXenes to meet the strict requirements of biomedicine. This work introduces the very recent progress and novel paradigms of 2D MXenes for state-of-the-art biomedical applications, focusing on the design/synthesis strategies, therapeutic modalities, diagnostic imaging, biosensing, antimicrobial, and biosafety issues. It is highly expected that the elaborately engineered ultrathin MXenes nanosheets will become one of the most attractive biocompatible inorganic nanoplatforms for multiple and extensive biomedical applications to profit the clinical translation of nanomedicine.

Response of macrophages and neural cells in contact with reduced graphene oxide microfibers

Graphene-based materials are revealing a great promise for biomedical applications and demonstrating attractiveness for neural repair. In the context of neural tissue damage, the dialogue between neural and immune cells appears critical for driving regeneration, thus making the understanding of their relations pivotal. Herein, the acute response of RAW-264.7 macrophages on nanostructured reduced graphene oxide (rGO) microfibers has been evaluated through the analysis of cell parameters including proliferation, viability, intracellular content of reactive oxygen species, cell cycle, apoptosis, and cell size and complexity. The influence of the direct contact of rGO microfibers on their polarization towards M1 and M2 phenotypes has been studied by analyses of both M1 (CD80) and M2 (CD163) markers and the secretion of the inflammatory cytokines TNF-α and IL-6. Finally, the capability of these rGO microfibers to regulate neural stem cell differentiation has been also evaluated. Findings reveal that rGO microfibers inhibit the proliferation of RAW-264.7 macrophages without affecting their viability and cell cycle profiles. The presence of M1 and M2 macrophages on these microfibers was confirmed after 24 and 48 h, respectively, accompanied by a decrease in TNF-α and an increase in IL-6 cytokine secretion. These rGO microfibers were also able to support the formation of a highly interconnected neural culture composed of both neurons (map2⁺ cells) and glial cells (vimentin⁺ cells). These findings encourage further investigation of these microfibers as attractive biomaterials to interact with immune and neural cells, attempting to support wound healing and tissue repair after implantation.

Graphene Oxide Upregulates the Homeostatic Functions of Primary Astrocytes and Modulates Astrocyte-to-Neuron Communication

Graphene-based materials are the focus of intense research efforts to devise novel theranostic strategies for targeting the central nervous system. In this work, we have investigated the consequences of long-term exposure of primary rat astrocytes to pristine graphene (GR) and graphene oxide (GO) flakes. We demonstrate that GR/GO interfere with a variety of intracellular processes as a result of their internalization through the endolysosomal pathway. Graphene-exposed astrocytes acquire a more differentiated morphological phenotype associated with extensive cytoskeletal rearrangements. Profound functional alterations are induced by GO internalization, including the upregulation of inward-rectifying K⁺ channels and of Na⁺-dependent glutamate uptake, which are linked to the astrocyte capacity to control the extracellular homeostasis. Interestingly, GO-pretreated astrocytes promote the functional maturation of cocultured primary neurons by inducing an increase in intrinsic excitability and in the density of GABAergic synapses. The results indicate that graphene nanomaterials profoundly affect astrocyte physiology in vitro with consequences for neuronal network activity. This work supports the view that GO-based materials could be of great interest to address pathologies of the central nervous system associated with astrocyte dysfunctions.

Occupational exposure to graphene based nanomaterials: risk assessment

Graphene-based materials (GBMs) are a family of novel materials including graphene, few layer graphene (FLG), graphene oxide (GO), reduced graphene oxide (rGO) and graphene nanoplatelets (GNP). Currently, the risk posed by them to human health is associated mainly with the occupational exposure during their industrial and small-scale production or waste discharge. The most significant occupational exposure routes are inhalation, oral, cutaneous and ocular, inhalation being the majorly involved and most studied one. This manuscript presents a critical up-to-date review of the available in vivo toxicity data of the most significant GBMs, after using these exposure routes. The few in vivo inhalation toxicity studies (limited to 5-days of repeated exposure and only one to 5 days per week for 4 weeks) indicate inflammatory/fibrotic effects at the pulmonary level, not always reversible after 14/90 days. More limited in vivo data are available for the oral and ocular exposure routes, whereas the studies on cutaneous toxicity are at the initial stage. A long persistence of GBMs in rodents is recorded, while contradictory genotoxic data are reported. Data gap identification is also provided. Based on the available data, the occupational exposure limit cannot be determined. More experimental toxicity studies according to specific guidelines (tentatively validated for nanomaterials) and more information on the actual occupational exposure level to GBMs are needed. Furthermore, ADME (Absorption, Distribution, Metabolism, Excretion), genotoxicity, developmental and reproductive toxicity data related to the occupational exposure to GBMs have to be implemented. In addition, sub-chronic and/or chronic studies are still needed to completely exclude other toxic effects and/or carcinogenicity.

Facile room temperature synthesis of large graphene sheets from simple molecules

The simplest way to produce large graphene sheets starting from simple molecules (benzene or n-hexane) under ambient conditions (temperature and pressure).

The largest graphene sample obtained through a chemical reaction under ambient conditions (temperature and pressure), using simple molecules such as benzene or n-hexane as precursors, is reported. Starting from a heterogeneous reaction between solid iron chloride and the molecular precursor (benzene and n-hexane) at a water/oil interface, graphene sheets with micrometric lateral size are obtained as a film deposited at the liquid/liquid (L/L) interface. The pathway involving the cyclization and aromatization of n-hexane to benzene at the L/L interface, and the sequence of conversion of benzene to biphenyl and biphenyl to condensed rings (which originates the graphene structures) was followed by different characterization techniques and a mechanistic proposal is presented. Finally, we demonstrate that this route can be extended for the synthesis of N-doped graphene, using pyridine as the molecular precursor.

High-yield graphene produced from the synergistic effect of inflated temperature and gelatin offers high stability and cellular compatibility

The direct exfoliation of graphite (Gr) is highly desirable and feasible compared to conventional processes owing to its non-oxidative, facile and controlled synthesis conditions. Herein, gelatin (gel), a hydrolysed form of collagen, was used as an exfoliant to directly exfoliate Gr. The main advantages of exploring gel as an exfoliant is its easy availability, low cost and high biocompatibility, which alleviate the drawbacks of previous exfoliation methods. The effect of the exfoliation parameters such as temperature, ratio of interacting species and pH of the solution offers a high yield of graphene (G) with the added advantages of good solubility, easy dispersibility and high stability. The temperature elevation caused by the dissipation of sonic waves facilitates a high exfoliation yield. Yield of 4.37 mg mL-1 of G was achieved under the conditions of 7 h sonication at 60 °C, pH 7 and Gr to gel ratio of 60 : 40, whereas yield of 1 mg mL-1 was achieved under sonication at 30 °C. Raman spectroscopy and transmission electron microscopy indicated the production of G sheets with 3-5 layers. The adsorption of gel on the surface of G via π-π interactions offers high stability and retains its inherent crystallinity. The as-synthesized G dispersion exhibits good cyto- and hemocompatibility. Unlike graphene oxide, the G dispersion does not affect RBCs at a relatively high concentration of 10 mg mL-1. These findings offer new avenues for the large-scale production of G and promote its biomedical applications, particularly in scaffold materials and intravenous drug delivery.

An overview of graphene materials: Properties, applications and toxicity on aquatic environments

Due to unique chemical and physical properties, nanomaterials from the Graphene family are being increasingly introduced in all fields of science. The specific roles they can occupy within different applications are attracting increased attention by several industrial sectors. These carbon nanoparticles are released into the environment especially accumulating in aquatic systems. Since the discovery of graphene, a number of research actives are being conducted to find out the toxic potential of the Graphene family materials to different organism's models. Although their toxicity effects are well described for biomedical applications, few data were produced with the specific aim of assessing the toxic effects of these carbon nanomaterials in the aquatic environment. The purpose of this review is to compile up-to-date information on properties, applications and characterization methods of graphene family materials in aquatic environments and identified biological toxic impacts of these NMs, with special focus on graphene oxide based on the most recent literature.

Facile, environmentally benign and scalable approach to produce pristine few layers graphene suitable for preparing biocompatible polymer nanocomposites

The success of developing graphene based biomaterials depends on its ease of synthesis, use of environmentally benign methods and low toxicity of the chemicals involved as well as biocompatibility of the final products/devices. We report, herein, a simple, scalable and safe method to produce defect free few layers graphene using naturally available phenolics i.e. curcumin/tetrahydrocurcumin/quercetin, as solid-phase exfoliating agents with a productivity of ∼45 g/batch (D/G ≤ 0.54 and D/D' ≤ 1.23). The production method can also be employed in liquid-phase using a ball mill (20 g/batch, D/G ≤ 0.23 and D/D' ≤ 1.12) and a sand grinder (10 g/batch, D/G ≤ 0.11 and D/D∼ ≤ 0.78). The combined effect of π-π interaction and charge transfer (from curcumin to graphene) is postulated to be the driving force for efficient exfoliation of graphite. The yielded graphene was mixed with the natural rubber (NR) latex to produce thin film nanocomposites, which show superior tensile strength with low modulus and no loss of % elongation at break. In-vitro and in-vivo investigations demonstrate that the prepared nanocomposite is biocompatible. This approach could be useful for the production of materials suitable in products (gloves/condoms/catheters), which come in contact with body parts/body fluids.

Sonochemically Assembled Photoluminescent Copper-Modified Graphene Oxide Microspheres

A new accessible sonochemical assembly method is developed for the preparation of photoluminescent oil-filled silica@CuS/Cu₂O/CuO-graphene oxide (GO) microspheres that emit light of green, yellow, and red colors. This method is based on the ultrasonic emulsification of a biphasic mixture consisting of CuS/Cu₂O/CuO-graphene oxide (GO) nanocomposites with poly(vinyl alcohol) (PVA) (aqueous phase) and tetraethyl orthosilicate with sunflower oil (organic phase). CuS/Cu₂O/CuO-GO nanocomposites are composed of sonochemically formed three phases of copper: covellite CuS (p-type semiconductor), cuprite Cu₂O (Bloch p-type semiconductor), and CuO (charge-transfer insulator). The photoluminescence properties of microspheres result from H-bridging between PVA and CuS/Cu₂O/CuO-GO nanostructures, light absorption ability of Cu₂O, and charge-transfer insulation by CuO. Substitution of PVA by S-containing methylene blue quenches fluorescence by enhanced dye adsorption on CuS/Cu₂O/CuO-GO because of CuS and induced charge transfer. Non-S-containing malachite green is in a nonionized form and tends to be in the oil phase, prohibiting the charge transfer on CuS/Cu₂O/CuO-GO.

Recent developments in the synthesis and applications of graphene-family materials functionalized with cyclodextrins

The introduction of cyclodextrin species to graphene-family materials (GFMs) constitutes an important area of research, especially in terms of the development of applied nanoscience. The chemistry of cyclodextrins is the so-called host-guest chemistry, which has impacted on many fields of research, including catalysis, electrochemistry and nanomedicine. Cyclodextrins are water-soluble and biocompatible supramolecules, and therefore they may introduce new interesting properties to GFMs and may enhance the physicochemical/biological features of native GFMs. The reported methods for the conjugation of cyclodextrins to GFMs utilize either covalent or non-covalent approaches. The recent progress in the applications of GFMs functionalized with cyclodextrins, with the respect to the chemistry and features of these conjugates, is discussed. Special consideration is also given to the recent developments in (i) nanomedicine, (ii) electrochemistry, (iii) adsorption and (iv) catalysis. Examples of these materials are discussed in this work, together with the future outlook on the impact of GFM-cyclodextrin conjugates in the development of applied nanoscience.

A Review on Graphene-Based Nanomaterials in Biomedical Applications and Risks in Environment and Health

Graphene-based nanomaterials (GBNs) have attracted increasing interests of the scientific community due to their unique physicochemical properties and their applications in biotechnology, biomedicine, bioengineering, disease diagnosis and therapy. Although a large amount of researches have been conducted on these novel nanomaterials, limited comprehensive reviews are published on their biomedical applications and potential environmental and human health effects. The present research aimed at addressing this knowledge gap by examining and discussing: (1) the history, synthesis, structural properties and recent developments of GBNs for biomedical applications; (2) GBNs uses as therapeutics, drug/gene delivery and antibacterial materials; (3) GBNs applications in tissue engineering and in research as biosensors and bioimaging materials; and (4) GBNs potential environmental effects and human health risks. It also discussed the perspectives and challenges associated with the biomedical applications of GBNs.

Differential effects of graphene materials on the metabolism and function of human skin cells

Graphene-related materials (GRMs) such as graphene oxide (GO) and few-layer graphene (FLG) are used in multiple biomedical applications; however, there is still insufficient information available regarding their interactions with the main biological barriers such as skin. In this study, we explored the effects of GO and FLG on HaCaTs human skin keratinocytes, using NMR-based metabolomics and fluorescence microscopy to evaluate the global impact of each GRM on cell fate and damage. GO and FLG at low concentrations (5 μg mL-1) induced a differential remodeling of the metabolome, preceded by an increase in the level of radical oxygen species (ROS) and free cytosolic Ca2+. These changes are linked to a concentration-dependent increase in cell death by triggering apoptosis and necrosis, the latter being predominant at higher concentrations of the nanostructures. In addition, both compounds reduce the ability of HaCaT cells to heal wounds. Our results demonstrate that the GO and FLG used in this study, which mainly differ in their oxidation state, slightly trigger differential effects on HaCaTs cells, but with evident outcomes at the cellular and molecular levels. Their behavior as pro-apoptotic/necrotic substances and their ability to inhibit cell migration, even at low doses, should be considered in the development of future applications.

Carbon-based hybrid nanogels: a synergistic nanoplatform for combined biosensing, bioimaging, and responsive drug delivery

Nanosized crosslinked polymer networks, named as nanogels, are playing an increasingly important role in a diverse range of applications by virtue of their porous structures, large surface area, good biocompatibility and responsiveness to internal and/or external chemico-physical stimuli. Recently, a variety of carbon nanomaterials, such as carbon quantum dots, graphene/graphene oxide nanosheets, fullerenes, carbon nanotubes, and nanodiamonds, have been embedded into responsive polymer nanogels, in order to integrate the unique electro-optical properties of carbon nanomaterials with the merits of nanogels into a single hybrid nanogel system for improvement of their applications in nanomedicine. A vast number of studies have been pursued to explore the applications of carbon-based hybrid nanogels in biomedical areas for biosensing, bioimaging, and smart drug carriers with combinatorial therapies and/or theranostic ability. New synthetic methods and structures have been developed to prepare carbon-based hybrid nanogels with versatile properties and functions. In this review, we summarize the latest developments and applications and address the future perspectives of these carbon-based hybrid nanogels in the biomedical field.

New routes to the functionalization patterning and manufacture of graphene-based materials for biomedical applications

Graphene-based materials are being widely explored for a range of biomedical applications, from targeted drug delivery to biosensing, bioimaging and use for antibacterial treatments, to name but a few. In many such applications, it is not graphene itself that is used as the active agent, but one of its chemically functionalized forms. The type of chemical species used for functionalization will play a key role in determining the utility of any graphene-based device in any particular biomedical application, because this determines to a large part its physical, chemical, electrical and optical interactions. However, other factors will also be important in determining the eventual uptake of graphene-based biomedical technologies, in particular the ease and cost of manufacture of proposed device and system designs. In this work, we describe three novel routes for the chemical functionalization of graphene using oxygen, iron chloride and fluorine. We also introduce novel in situ methods for controlling and patterning such functionalization on the micro- and nanoscales. Our approaches are readily transferable to large-scale manufacturing, potentially paving the way for the eventual cost-effective production of functionalized graphene-based materials, devices and systems for a range of important biomedical applications.

Interfacing Graphene-Based Materials With Neural Cells

The scientific community has witnessed an exponential increase in the applications of graphene and graphene-based materials in a wide range of fields, from engineering to electronics to biotechnologies and biomedical applications. For what concerns neuroscience, the interest raised by these materials is two-fold. On one side, nanosheets made of graphene or graphene derivatives (graphene oxide, or its reduced form) can be used as carriers for drug delivery. Here, an important aspect is to evaluate their toxicity, which strongly depends on flake composition, chemical functionalization and dimensions. On the other side, graphene can be exploited as a substrate for tissue engineering. In this case, conductivity is probably the most relevant amongst the various properties of the different graphene materials, as it may allow to instruct and interrogate neural networks, as well as to drive neural growth and differentiation, which holds a great potential in regenerative medicine. In this review, we try to give a comprehensive view of the accomplishments and new challenges of the field, as well as which in our view are the most exciting directions to take in the immediate future. These include the need to engineer multifunctional nanoparticles (NPs) able to cross the blood-brain-barrier to reach neural cells, and to achieve on-demand delivery of specific drugs. We describe the state-of-the-art in the use of graphene materials to engineer three-dimensional scaffolds to drive neuronal growth and regeneration in vivo, and the possibility of using graphene as a component of hybrid composites/multi-layer organic electronics devices. Last but not least, we address the need of an accurate theoretical modeling of the interface between graphene and biological material, by modeling the interaction of graphene with proteins and cell membranes at the nanoscale, and describing the physical mechanism(s) of charge transfer by which the various graphene materials can influence the excitability and physiology of neural cells.

2D MoS2 Nanostructures for Biomedical Applications

MoS₂ nanosheets, a typical kind of layered transition metal dichalcogenides with the 2D structure and many unique physical and chemical properties, have attracted a lot of research interests in various fields. Typically, MoS₂ nanosheets present similarities to graphene in terms of their large surface area and strong absorbance in near-infrared region, which in combination with their easily functionalized surface make them promising nanoplatforms in biomedical applications. Herein, the progress of MoS₂ nanosheets and their composites in the area of nanomedicine, with the emphasis on their synthesis and modification strategies, their biomedical applications in biosensing, imaging and therapy, as well as evaluations of their in vivo behaviors and toxicology profiles are summarized. Finally, the challenges and opportunities of applying MoS₂ -based nanomaterials in the biomedicine areas will be discussed.

Combined therapies with nanostructured carbon materials: there is room still available at the bottom

The progress of the chemistry of carbon nanotubes (CNT) and graphene derivatives [mainly graphene oxide (GO)] has produced a number of technologically advanced drug delivery systems (DDS) that have been used in the field of nanomedicine, mostly in studies related to oncology. However, such a demanding field of research requires continuous improvements in terms of efficiency, selectivity and versatility. The loading of two, or more, bioactive components on the same nanoparticle offers new possibilities for treating cancer, efficiently addressing issues related both to biodistribution and pharmacokinetics. Nanostructured carbon materials (NCM), with their high surface area, their efficient cellular membrane crossing and their chemical versatility are ideal candidates for easy hetero-decoration and exploitation as advanced DDS. This review describes the achievements obtained in this area focusing on those studies in which two or more active components were loaded onto the DDS.

A Highly Sensitive Strategy for Fluorescence Imaging of MicroRNA in Living Cells and in Vivo Based on Graphene Oxide-Enhanced Signal Molecules Quenching of Molecular Beacon

In situ imaging of microRNA (miRNA) in living cells and in vivo is beneficial for promoting the studies on miRNA-related physiological and pathological processes. However, the current strategies usually have a low signal-to-background ratio, which greatly affects the sensitivity and imaging performance. To solve this problem, we developed a highly sensitive strategy for fluorescence imaging of miRNA in living cells and in vivo based on graphene oxide (GO)-enhanced signal molecule quenching of a molecular beacon (MB). 2Cy5-MB was designed by coupling two Cy5 molecules onto the opposite ends of MB. The fluorescence intensities of two Cy5 molecules were reduced because of the self-quenching effect. After adsorbing on the GO surface, the fluorescence quenching of the molecules was enhanced by fluorescence resonance energy transfer. This double-quenching effect significantly reduced the fluorescence background. In the presence of one miRNA molecule, the fluorescence signals of two Cy5 molecules were simultaneously recovered. Therefore, a significantly enhanced signal-to-background ratio was obtained, which greatly improved the detection sensitivity. In the presence of miRNA, the fluorescence intensity of 2Cy5-MB-GO recovered about 156 times and the detection limit was 30 pM. Compared with 1Cy5-MB-GO, the elevated fluorescence intensity was enhanced 8 times and the detection limit was reduced by an order of magnitude. Furthermore, fluorescence imaging experiments demonstrated that 2Cy5-MB-GO could visually detect microRNA-21 in various cancer cells and tumor tissues. This simple and effective strategy provides a new sensing platform for highly sensitive detection and simultaneous imaging analysis of multiple low-level biomarkers in living cells and in vivo.

Soft Material-Enabled, Flexible Hybrid Electronics for Medicine, Healthcare, and Human-Machine Interfaces

Flexible hybrid electronics (FHE), designed in wearable and implantable configurations, have enormous applications in advanced healthcare, rapid disease diagnostics, and persistent human-machine interfaces. Soft, contoured geometries and time-dynamic deformation of the targeted tissues require high flexibility and stretchability of the integrated bioelectronics. Recent progress in developing and engineering soft materials has provided a unique opportunity to design various types of mechanically compliant and deformable systems. Here, we summarize the required properties of soft materials and their characteristics for configuring sensing and substrate components in wearable and implantable devices and systems. Details of functionality and sensitivity of the recently developed FHE are discussed with the application areas in medicine, healthcare, and machine interactions. This review concludes with a discussion on limitations of current materials, key requirements for next generation materials, and new application areas.

Peripheral Neuron Survival and Outgrowth on Graphene

Graphene displays properties that make it appealing for neuroregenerative medicine, yet its interaction with peripheral neurons has been scarcely investigated. Here, we culture on graphene two established models for peripheral neurons: PC12 cells and DRG primary neurons. We perform a nano-resolved analysis of polymeric coatings on graphene and combine optical microscopy and viability assays to assess the material cytocompatibility and influence on differentiation. We find that differentiated PC12 cells display a remarkably increased neurite length on graphene (up to 27%) with respect to controls. Notably, DRG primary neurons survive both on bare and coated graphene. They present dense axonal networks on coated graphene, while they form cell islets characterized by dense axonal bundles on uncoated graphene. These findings indicate that graphene holds potential for nerve tissue regeneration and might pave the road to novel concepts of active nerve conduits.

An upconversion nanoparticle-based fluorescence resonance energy transfer system for effectively sensing caspase-3 activity

We report a new fluorescence resonance energy transfer (FRET) sensing platform for the sensitive detection of caspase-3 activity in vitro and in cells using NaGdF₄:Yb³⁺,Er³⁺@NaGdF₄ upconversion nanoparticles (UCNPs) as the energy donor and Rhodamine B (RB) as the energy acceptor. The phosphorylated RB-modified peptide containing a caspase-3 cleavage site and cell-penetrating peptide (CPP) motif (sequence, (RB)-DEVDGGS(p)GCGT(p)GRKKRRQRRRPQ) is immobilized on the UCNP surface via the strong coordination interaction between Gd³⁺ ions with phosphate. After the cleavage of DEVD by caspase-3, the RB is released from the UCNP surface and the reduced upconversion luminescence (UCL) is recovered. Under the optimum conditions, the recovery ratio of the UCL is linearly dependent on the caspase-3 concentration within the range of 0.01 to 1000 pg mL^-1 and with a limit of detection (LOD) of 0.01 pg mL^-1 (S/N = 3). In particular, the as-proposed UCNP-based FRET sensing platform has reasonable selectivity which is successfully employed to monitor caspase-3 activity in drug-induced apoptosis of HeLa cells.