Gold nanorods: from synthesis and properties to biological and biomedical applications

A dual-targeted electrochemical aptasensor for neuroblastoma-related microRNAs detection

Neuroblastoma (NB) is a significant pediatric cancer associated with high mortality rates, demanding innovative and appropriate approaches for its accurate detection. This paper described the design of a dual-target electrochemical aptasensor capable of simultaneously detecting neuroblastoma-associated microRNAs (miRNA-181 and miRNA-184) with exceptional sensitivity. Screen-printed carbon electrodes (SPCEs) were utilized with gold nanorods (AuNRs), and aptamers functionalized gold nanoparticles (AuNPs) to improve sensitivity, specificity, and portable detection ability. The detection method employed in this study includes differential pulse voltammetry (DPV) and cyclic voltammetry (CV). Our aptasensor exhibited remarkable limits of detections (LODs) of 5.10 aM for miRNA-181 and 9.39 aM for miRNA-184, respectively, along with a broad linear range spanning from 0.1 fM to 100 pM for both miRNAs. The practical significance of neuroblastoma diagnosis was shown through the validation of serum samples and comparison with quantitative polymerase chain reaction (qPCR). Our electrochemical aptasensor is user-friendly, easy to engineer, and offers a promising approach for accurately and selectively detecting important miRNA biomarkers in cancer screening and diagnosis, showing potential application in various clinical scenarios.

Photothermal induction of pyroptosis in malignant glioma spheroids using (16-mercaptohexadecyl)trimethylammonium bromide-modified cationic gold nanorods

Plasmonic photothermal therapy (PPTT) employing plasmonic gold nanorods (GNRs) presents a potent strategy for eradication of tumors including aggressive brain gliomas. Despite its promise, there is a pressing need for a more comprehensive evaluation of PPTT using sophisticated in vitro models that closely resemble tumor tissues, thereby facilitating the elucidation of therapeutic mechanisms. In this study, we exposed 3D glioma spheroids (tumoroids) to (16-mercaptohexadecyl)trimethylammonium bromide-functionalized gold nanorods (MTAB-GNRs) and a near-infrared (NIR) laser. We demonstrate that the photothermal effect can be fine-tuned by adjusting the nanoparticle concentration and laser power. Depending on the selected parameters, the laser can trigger either regulated or non-regulated cell death (necrosis) in both mouse GL261 and human U-87 MG glioma cell lines, accompanied by translocation of phosphatidylserine in the membrane. Our investigation into the mechanism of regulated cell death induced by PPTT revealed an absence of markers associated with classical apoptosis pathways, such as cleaved caspase 3. Instead, we observed the presence of cleaved caspase 1, gasdermin D, and elevated levels of NLRP3 in NIR-irradiated tumoroids, indicating the activation of pyroptosis. This finding correlates with previous observations of lysosomal accumulation of MTAB-GNRs and the known lysosomal pathway of pyroptosis activation. We further confirmed the absence of toxic breakdown products of GNRs using electron microscopy, which showed no melting or fragmentation of gold nanoparticles under the conditions causing regulated cell death. In conclusion, PPTT using coated gold nanorods offers significant potential for glioma cell elimination occurring through the activation of pyroptosis rather than classical apoptosis pathways.

Progress and challenges in bacterial infection theranostics based on functional metal nanoparticles

The rapid proliferation and infection of bacteria, especially multidrug-resistant bacteria, have become a great threat to global public health. Focusing on the emergence of "super drug-resistant bacteria" caused by the abuse of antibiotics and the insufficient and delayed early diagnosis of bacterial diseases, it is of great research significance to develop new technologies and methods for early targeted detection and treatment of bacterial infection. The exceptional effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for the detection and treatment of bacterial infection both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Herein, we summarized the research progress concerning the mechanism of metal nanoparticles in terms of antibacterial activity together with the detection of bacterial. Representative achievements are selected to illustrate the proof-of-concept in vitro and in vivo applications. Based on these observations, we also give a brief discussion on the current problems and perspective outlook of metal nanoparticles in the diagnosis and treatment of bacterial infection.

Impact of tip curvature and edge rounding on the plasmonic properties of gold nanorods and their silver-coated counterparts

Colloidal solutions of gold nanorods and silver-coated gold nanorods were prepared. The seeded growth synthesis protocols were improved by adding a flocculation purification step. The resulting populations of pure gold nanorods and Au@Ag core-shell cuboids were characterized by very low dispersion in size and shape. UV-vis-near-infrared absorption measurements were performed on several batches of well-calibrated nano-objects, supported by calculations based on the discrete dipole approximation, allowed to highlight the impact of various morphological features on the optical response. In addition to the well-known effect of the nanorod aspect ratio on the shift of the longitudinal surface plasmon resonance mode, special attention was paid to changing either the rounding of the nanorod end-caps or that of the edges of the coating silver shell. Nanorods and cuboids were modeled as superellipsoids. This approach enabled us to model precisely their complex shapes using just a few simple parameters and analyze the evolution of their extinction spectra as a function of the rounding of their tips and edges. Such nano-objects are widely used for various applications in fields such as biomedical, biosensing, or surface-enhanced Raman spectroscopy, thus making it crucial to precisely assess the impact of each morphological feature for optimizing their performance.

Pentatwinned AuAg Nanorattles with Tailored Plasmonic Properties for Near-Infrared Applications

Noble metal nanoparticles, particularly gold and silver nanoparticles, have garnered significant attention due to their ability to manipulate light at the nanoscale through their localized surface plasmon resonance (LSPR). While their LSPRs below 1100 nm were extensively exploited in a wide range of applications, their potential in the near-infrared (NIR) region, crucial for optical communication and sensing, remains relatively underexplored. One primary reason is likely the limited strategies available to obtain highly stable plasmonic nanoparticles with tailored optical properties in the NIR region. Herein, we synthesized AuAg nanorattles (NRTs) with tailored and narrow plasmonic responses ranging from 1000 to 3000 nm. Additionally, we performed comprehensive characterization, employing advanced electron microscopy and various spectroscopic techniques, coupled with finite difference time domain (FDTD) simulations, to elucidate their optical properties. Notably, we unveiled the main external and internal LSPR modes by combining electron energy-loss spectroscopy (EELS) with surface-enhanced Raman scattering (SERS). Furthermore, we demonstrated through surface-enhanced infrared absorption spectroscopy (SEIRA) that the NRTs can significantly enhance the infrared signals of a model molecule. This study not only reports the synthesis of plasmonic NRTs with tunable LSPRs over the entire NIR range but also demonstrates their potential for NIR sensing and optical communication.

Synthesis and evaluation of curcumin reduced and capped gold nanoparticles as a green diagnostic probe with therapeutic potential

Curcumin, a compound in turmeric, shows promise for its anti-cancer properties. In this study, we successfully synthesised curcumin-reduced and capped gold nanoparticles. Most evaluations have been limited to in-vitro studies for these nanoparticles; our study takes a step further by highlighting the in-vivo assessment of these curcumin-reduced and capped gold nanoparticles (GNPCs) using non-invasive imaging (SPECT and optical) and possible therapeutic potential. The GNPCs showed an average hydrodynamic diameter of 58 nm and a PDI of 0.336. The synthesised and fully characterised GNPCs showed ex-vivo hemolysis value of ≤ 1.74 % and serum stability of ≥ 95 % over 24 h. Using in-vivo non-invasive (SPECT and optical Imaging), prolonged circulation and enhanced bioavailability of GNPCs were seen. The biodistribution studies after radiolabelling GNPCs with 99 mTc complemented the optical imaging. The SPECT images showed higher uptake of the GNPCs at the tumour site, viz the contralateral muscle and the native Curcumin, resulting in a high target-to-non-target ratio that differentiated the tumour sufficiently and enhanced the diagnostics. Other organs also accumulate radiolabeled GNPCs in systemic circulation; bio dosimetry is performed. It was found that the dose received by the different organs was safe for use, and the in-vivo toxicity studies in rats indicated negligible toxicity over 30 days. The tumour growth was also reduced in mice models treated with GNPCs compared to the control. These significant findings demonstrate that GNPC shows synergistic activity in vivo, indicating its ability as a green diagnostic probe that has the potential for therapy.

Single-particle rotational microrheology enables pathological staging of macrophage foaming and antiatherosclerotic studies

The formation of macrophage-derived foam cells has been recognized as the pathological hallmark of atherosclerotic diseases. However, the pathological evolution dynamics and underlying regulatory mechanisms remain largely unknown. Herein, we introduce a single-particle rotational microrheology method for pathological staging of macrophage foaming and antiatherosclerotic explorations by probing the dynamic changes of lysosomal viscous feature over the pathological evolution progression. The principle of this method involves continuous monitoring of out-of-plane rotation-caused scattering brightness fluctuations of the gold nanorod (AuNR) probe-based microrheometer and subsequent determination of rotational relaxation time to analyze the viscous feature in macrophage lysosomes. With this method, we demonstrated the lysosomal viscous feature as a robust pathological reporter and uncovered three distinct pathological stages underlying the evolution dynamics, which are highly correlated with a pathological stage-dependent activation of the NLRP3 inflammasome-involved positive feedback loop. We also validated the potential of this positive feedback loop as a promising therapeutic target and revealed the time window-dependent efficacy of NLRP3 inflammasome-targeted drugs against atherosclerotic diseases. To our knowledge, the pathological staging of macrophage foaming and the pathological stage-dependent activation of the NLRP3 inflammasome-involved positive feedback mechanism have not yet been reported. These findings provide insights into in-depth understanding of evolutionary features and regulatory mechanisms of macrophage foaming, which can benefit the analysis of effective therapeutical drugs as well as the time window of drug treatment against atherosclerotic diseases in preclinical studies.

Combined Photothermal Therapy and Cancer Immunotherapy by Immunogenic Hollow Mesoporous Silicon-Shelled Gold Nanorods

Hyperthermia can be integrated with tumor-killing chemotherapy, radiotherapy and immunotherapy to give rise to an anti-tumor response. To this end, a nano-delivery system is built, which can connect hyperthermia and immunotherapy. On this basis, the impact of such a combination on the immune function of dendritic cells (DCs) is explored. The core of this system is the photothermal material gold nanorod (GNR), and its surface is covered with a silica shell. Additionally, it also forms a hollow mesoporous structure using the thermal etching approach, followed by modification of targeted molecule folic acid (FA) on its surface, and eventually forms a hollow mesoporous silica gold nanorod (GNR@void@mSiO2) modified by FA. GNR@void@mSiO2-PEG-FA (GVS-FA) performs well in photothermal properties, drug carriage and release and tumor targeting performance. Furthermore, the thermotherapy of tumor cells through in vitro NIR irradiation can directly kill tumor cells by inhibiting proliferation and inducing apoptosis. GVS-FA loaded with imiquimod (R837) can be used as a adjuvant to enhance the immune function of DCs through hyperthermia.

Photothermal Actuation of Thick 3D-Printed Liquid Crystalline Elastomer Nanocomposites

Liquid crystalline elastomers (LCEs) are stimuli-responsive materials that transduce an input energy into a mechanical response. LCE composites prepared with photothermal agents, such as nanoinclusions, are a means to realize wireless, remote, and local control of deformation with light. Amongst photothermal agents, gold nanorods (AuNRs) are highly efficient converters when the irradiation wavelength matches the longitudinal surface plasmon resonance (LSPR) of the AuNRs. However, AuNR aggregation broadens the LSPR which also reduces photothermal efficiency. Here, the surface chemistry of AuNRs is engineered via a well-controlled two-step ligand exchange with a monofunctional poly(ethylene glycol) (PEG) thiol that greatly improves the dispersion of AuNRs in LCEs. Accordingly, LCE-AuNR nanocomposites with very low PEG-AuNR content (0.01 wt%) prepared by 3D printing are shown to be highly efficient photothermal actuators with rapid response (>60% strain s-1) upon irradiation with near-infrared (NIR; 808 nm) light. Because of the excellent dispersion of PEG-AuNR within the LCE, unabsorbed NIR light transmits through the nanocomposites and can actuate a series of samples. Further, the dispersion also allows for the optical deformation of millimeter-thick 3D printed structures without sacrificing actuation speed. The realization of well-dispersed nanoinclusions to maximize the stimulus-response of LCEs can benefit functional implementation in soft robotics or medical devices.

3D-Printed Hydrogels as Photothermal Actuators

Thermoresponsive hydrogels were 3D-printed with embedded gold nanorods (GNRs), which enable shape change through photothermal heating. GNRs were functionalized with bovine serum albumin and mixed with a photosensitizer and poly(N-isopropylacrylamide) (PNIPAAm) macromer, forming an ink for 3D printing by direct ink writing. A macromer-based approach was chosen to provide good microstructural homogeneity and optical transparency of the unloaded hydrogel in its swollen state. The ink was printed into an acetylated gelatin hydrogel support matrix to prevent the spreading of the low-viscosity ink and provide mechanical stability during printing and concurrent photocrosslinking. Acetylated gelatin hydrogel was introduced because it allows for melting and removal of the support structure below the transition temperature of the crosslinked PNIPAAm structure. Convective and photothermal heating were compared, which both triggered the phase transition of PNIPAAm and induced reversible shrinkage of the hydrogel-GNR composite for a range of GNR loadings. During reswelling after photothermal heating, some structures formed an internally buckled state, where minor mechanical agitation recovered the unbuckled structure. The BSA-GNRs did not leach out of the structure during multiple cycles of shrinkage and reswelling. This work demonstrates the promise of 3D-printed, photoresponsive structures as hydrogel actuators.

The Role of the Polyethylene Glycol in the Organization of Gold Nanorods at the Air-Water and Air-Solid Interfaces

The organization of metallic nanoparticles into assembled films is a complex process. The type of nanoparticle stabilizing ligand and the method for creating an organized layer can profoundly affect the optical properties of the resulting nanoparticle assembly. Investigations of the ligand structure and nanoparticle interactions can provide a greater understanding of the design of the assembly process and the quality of the resulting materials. One of the functionalization methods in the preparation of specific gold nanorods is the utilization of thiol-terminated poly(ethylene glycol). This generates gold nanorods capable of forming stable monolayers at the air-water interface upon dispersion in a suitable organic solvent. Herein, we show that depending on the molecular weight of the poly(ethylene glycol), the structures obtained at the air-water and air-solid interfaces differ in the arrangement. The studied structures were characterized by using spectroscopic and microscopic techniques, and the structural type was correlated with the polymer type. Insoluble and stable Langmuir monolayers composed of higher-molecular-weight gold nanorods with poly(ethylene glycol) were formed only in the presence of an additional stabilizer that prevented the formation of gold nanorods in aqueous solutions. At the air-solid interface, conformational changes in poly(ethylene glycol) induced the aggregation of gold nanorods, which became closely packed under the influence of surface pressure. The presented results suggested that the arrangement of two-dimensional layers of gold nanorods could be tailored using poly(ethylene glycol) of various molecular weights.

A near-infrared plasmonic biosensor for detection of morphine and codeine in biological samples based on the end-to-end assembly of modified gold nanorods

The analytical determination of opiates in biological samples is a critical mission and remains a challenge for almost all judicial and clinical drug testing panels due to their high abuse potential. Based on the high sensitivity of the longitudinal surface plasmon resonance (LSPR) peak of gold nanorods (AuNRs), we successfully developed a novel and simple refractive index sensing platform for detection of morphine (MOR) and codeine (COD) by means of 2-amino-5-mercapto-1,3,4-thiadiazole functionalized gold nanorods (AMTD-AuNRs) in aqueous solution, which is, to the best of our knowledge, the first report on the assay of MOR and COD using AuNRs. AMTD molecules strongly anchor onto the tips of AuNRs via the mercapto group and subsequent hydrogen-bonding interactions between AMTD and the analytes induced end-to-end chain assembly of AuNRs and a consequent decrease of the LSPR absorption band at 850 nm along with a bathochromic shift and emergence of a new hybridized plasmon mode at 1050 nm which was characterized using a Vis-NIR spectrophotometer. After systematic optimization, the absorbance ratio (A1050/A850) was proportional to the concentration of MOR in the ranges of 0.08-5 μM and 0.2-8 μM for COD without any significant effect from possible interferents. Furthermore, detection limits of 40 and 62 nM were achieved for MOR and COD, respectively, which are much lower than the cut-off level of 2000 ng mL-1 for opiates in urine samples set by the Substance and Abuse Mental Health Services Administration (SAMHSA). Eventually, as proof-of-applicability, human urine and blood serum samples spiked with MOR and COD were analyzed and excellent recoveries ranging from 94.4 to 108.9% were obtained, demonstrating the successful applicability of the designed refractive index probe in real biological specimens.

Nanomaterials in 4D Printing: Expanding the Frontiers of Advanced Manufacturing

As an innovative technology, four-dimentional (4D) printing is built upon the principles of three-dimentional (3D) printing with an additional dimension: time. While traditional 3D printing creates static objects, 4D printing generates "responsive 3D printed structures", enabling them to transform or self-assemble in response to external stimuli. Due to the dynamic nature, 4D printing has demonstrated tremendous potential in a range of industries, encompassing aerospace, healthcare, and intelligent devices. Nanotechnology has gained considerable attention owing to the exceptional properties and functions of nanomaterials. Incorporating nanomaterials into an intelligent matrix enhances the physiochemical properties of 4D printed constructs, introducing novel functions. This review provides a comprehensive overview of current applications of nanomaterials in 4D printing, exploring their synergistic potential to create dynamic and responsive structures. Nanomaterials play diverse roles as rheology modifiers, mechanical enhancers, function introducers, and more. The overarching goal of this review is to inspire researchers to delve into the vast potential of nanomaterial-enabled 4D printing, propelling advancements in this rapidly evolving field.

DNAzyme-RCA-based colorimetric and lateral flow dipstick assays for the point-of-care testing of exosomal m5C-miRNA-21

Methylation of microRNAs (miRNAs) is a post-transcriptional modification that affects miRNA activity by altering the specificity of miRNAs to target mRNAs. Abnormal methylation of miRNAs in cancer suggests their potential as a tumor marker. However, the traditional methylated miRNA detection mainly includes mass spectrometry, sequencing and others; complex procedures and reliance on large instruments greatly limit their application in point-of-care testing (POCT). Based on this, we developed DNAzyme-RCA-based gold nanoparticle (AuNP) colorimetric and lateral flow dipstick (LFD) assays to achieve convenient detection of exosomal 5-methylcytosine miRNA-21 (m5C-miRNA-21) for the first time. The two assays achieved specific recognition and linear amplification of m5C-miRNA-21 through the DNAzyme triggered RCA reaction and color output with low background interference through AuNP aggregation induced by base complementary pairing. The lowest concentration of m5C-miRNA-21 visible to the naked eye of the two assays can reach 1 pM and 0.1 pM, respectively. Detection of exosomal m5C-miRNA-21 in clinical blood samples showed that the expression level of m5C-miRNA-21 in colorectal cancer patients was significantly higher than that in healthy individuals. This approach not only demonstrates a new strategy for the detection of colorectal cancer but also provides a reference for the development of novel diagnostic tools for other miRNA methylation-related diseases.

SERS in 3D cell models: a powerful tool in cancer research

Unraveling the cellular and molecular mechanisms underlying tumoral processes is fundamental for the diagnosis and treatment of cancer. In this regard, three-dimensional (3D) cancer cell models more realistically mimic tumors compared to conventional 2D cell cultures and are more attractive for performing such studies. Nonetheless, the analysis of such architectures is challenging because most available techniques are destructive, resulting in the loss of biochemical information. On the contrary, surface-enhanced Raman spectroscopy (SERS) is a non-invasive analytical tool that can record the structural fingerprint of molecules present in complex biological environments. The implementation of SERS in 3D cancer models can be leveraged to track therapeutics, the production of cancer-related metabolites, different signaling and communication pathways, and to image the different cellular components and structural features. In this review, we highlight recent progress in the use of SERS for the evaluation of cancer diagnosis and therapy in 3D tumoral models. We outline strategies for the delivery and design of SERS tags and shed light on the possibilities this technique offers for studying different cellular processes, through either biosensing or bioimaging modalities. Finally, we address current challenges and future directions, such as overcoming the limitations of SERS and the need for the development of user-friendly and robust data analysis methods. Continued development of SERS 3D bioimaging and biosensing systems, techniques, and analytical strategies, can provide significant contributions for early disease detection, novel cancer therapies, and the realization of patient-tailored medicine.

Metal-Organic Framework-Capped Gold Nanorod Hybrids for Combinatorial Cancer Therapy

Recently, nanomaterials have attracted extensive attention in cancer-targeting therapy and as drug delivery vehicles owing to their unique surface and size properties. Multifunctional combinations of nanomaterials have become a research hotspot as researchers aim to provide a full understanding of their nanomaterial characteristics. In this study, metal-organic framework-capped gold nanorod hybrids were synthesized. Our research explored their ability to kill tumor cells by locally increasing the temperature via photothermal conclusion. The specific peroxidase-like activity endows the hybrids with the ability to disrupt the oxidative balance in vitro. Simultaneously, chemotherapeutic drugs are administered and delivered by loading and transportation for effective combinatorial cancer treatment, thereby enhancing the curative effect and reducing the unpredictable toxicity and side effects of large doses of chemotherapeutic drugs. These studies can improve combinatorial cancer therapy and enhance cancer treatment.

Glutamic Acid Modified Gold Nanorod Sensor for the Detection of Calcium ions in Neuronal Cells

Calcium (Ca2+) ions play a crucial role in the functioning of neurons, governing various aspects of neuronal activity such as rapid modulation and alterations in gene expression. Ca2+ signaling has a significant impact on the development of diseases and the impairment of neuronal functions. Herein, the study reports a Ca2+ ion sensor in neuronal cells using a gold nanorod. The gold nanorod (GA-GNR) conjugated glutamic acid developed in the study was used as a nano-bio probe for the experimental and in vitro detection of calcium. The nanosensor is colloidally stable, preserves plasmonic properties, and shows good viability in neuronal cells, as well as promoting neuron cell line growth. The cytotoxicity and cell penetration of the nanosensor are studied using Raman spectroscopy, brightfield and darkfield microscopy imaging, and MTT assays. The quantification of Ca2+ ions in neuronal cells is determined by monitoring the surface plasmon resonance (SPR) of the GA-GNR. The change in the intensity profile in the presence of Ca2+ incubated neurons was effectively used to develop a portable prototype of an optical Ca2+ sensor, proposing it as a tool for neurodegenerative disease diagnosis and neuromodulation evaluation.

Engineering gold nanoworms with tunable longitudinal plasmon peak in the near infrared and their refractive index sensing properties

The plasmonic properties of rod-shaped Au nanoparticles make them promising for numerous applications. The synthesis recipes for Au nanorods are well established and their longitudinal plasmon peak can be tuned over a wide wavelength range. Herein, we demonstrate that the longitudinal plasmon peak of gold NWs (NWs), which are bent nanorods, can be finely tuned in the near-infra-red region. The NWs were synthesized using a one-step reaction method. We have seen that the length and aspect ratio of NWs can be tuned by simply changing the pH of the reaction medium. Under higher pH reaction conditions, NWs with relatively smaller sizes were obtained. Similar to nanorods, NWs have a well-defined longitudinal plasmon peak, which scales linearly with their aspect ratio. Finite element analysis was used to model the optical properties of Au NWs. The simulated results matched well with the experimental spectra. The synthesized NWs have shown good refractive index sensitivities (RIS). The RIS of NWs increased with an increase in their aspect ratio. A maximum sensitivity value of 542 nm per RIU, was obtained for NWs with the plasmon peak at 1033 nm. The RIS values are comparable to that of Au nanorods and bipyramids.

ZnO Nanocages Decorated with Au@AgAu Yolk-Shell Nanomaterials for SERS-Based Detection of Hyperuricemia

Surface-enhanced Raman scattering (SERS) is widely recognized as a highly sensitive technology for chemical detection and biological sensing. In SERS-based biomedical applications, developing highly efficient sensing platforms based on SERS plays a pivotal role in monitoring disease biomarker levels and facilitating the early detection of cancer biomarkers. Hyperuricemia, characterized by abnormally high concentrations of uric acid (UA) in the blood, was associated with a range of diseases, such as gouty arthritis, heart disease, and acute kidney injury. Recent reports have demonstrated the correlation between UA concentrations in blood and tears. In this work, we report the fabrication of SERS substrates utilizing ZnO nanocages and yolk-shell-structured plasmonic nanomaterials for the noninvasive detection of UA in tears. This innovative SERS substrate enables noninvasive and sensitive detection of UA to prevent hyperuricemia-related diseases.

Plasmonic silver and gold nanoparticles: shape- and structure-modulated plasmonic functionality for point-of-caring sensing, bio-imaging and medical therapy

Silver and gold nanoparticles have found extensive biomedical applications due to their strong localized surface plasmon resonance (LSPR) and intriguing plasmonic properties. This review article focuses on the correlation among particle geometry, plasmon properties and biomedical applications. It discusses how particle shape and size are tailored via controllable synthetic approaches, and how plasmonic properties are tuned by particle shape and size, which are embodied by nanospheres, nanorods, nanocubes, nanocages, nanostars and core-shell composites. This article summarizes the design strategies for the use of silver and gold nanoparticles in plasmon-enhanced fluorescence, surface-enhanced Raman scattering (SERS), electroluminescence, and photoelectrochemistry. It especially discusses how to use plasmonic nanoparticles to construct optical probes including colorimetric, SERS and plasmonic fluorescence probes (labels/reporters). It also demonstrates the employment of Ag and Au nanoparticles in polymer- and paper-based microfluidic devices for point-of-care testing (POCT). In addition, this article highlights how to utilize plasmonic nanoparticles for in vitro and in vivo bio-imaging based on SERS, fluorescence, photoacoustic and dark-field models. Finally, this article shows perspectives in plasmon-enhanced photothermal and photodynamic therapy.

Nanoscale engineering of gold nanostars for enhanced photoacoustic imaging

Photoacoustic (PA) imaging is a diagnostic modality that combines the high contrast resolution of optical imaging with the high tissue penetration of ultrasound. While certain endogenous chromophores can be visualized via PA imaging, many diagnostic assessments require the administration of external probes. Anisotropic gold nanoparticles are particularly valued as contrast agents, since they produce strong PA signals and do not photobleach. However, the synthesis of anisotropic nanoparticles typically requires cytotoxic reagents, which can hinder their biological application. In this work, we developed new PA probes based on nanostar cores and polymeric shells. These AuNS were obtained through one-pot synthesis with biocompatible Good's buffers, and were subsequently functionalized with polyethylene glycol, chitosan or melanin, three coatings widely used in (pre)clinical research. Notably, the structural features of the nanostar cores strongly affected the PA signal. For instance, despite displaying similar sizes (i.e. 45 nm), AuNS obtained with MOPS buffer generated between 2 and 3-fold greater signal intensities in the region between 700 and 800 nm than nanostars obtained with HEPES and EPPS buffers, and up to 25-fold stronger signals than spherical gold nanoparticles. A point source analytical model demonstrated that AuNS synthesized with MOPS displayed greater absorption coefficients than the other particles, corroborating the stronger PA responses. Furthermore, the AuNS shell not only improved the biocompatibility of the nanoconstructs but also affected their performance, with melanin coating enhancing the signal more than 4-fold, due to its own PA capacity, as demonstrated by both in vitro and ex vivo imaging. Taken together, these results highlight the strengths of gold nanoconstructs as PA probes and offer insights into the design rules for the nanoengineering of new nanodiagnostic agents.

Multifunctional DNA scaffold mediated gap plasmon resonance: Application to sensitive PD-L1 sensor

The introduction of noble metal nanoparticles with good LSPR characteristics can greatly improve the sensitivity of SPR through resonance coupling effect. The plasma resonance response and optical properties of film coupling nanoparticle systems largely depends on the ingenious design of gap structures. Nucleic acid nanostructures have good stability, flexibility, and high biocompatibility, making them ideal materials for gap construction. 2D MOF (Cu-Tcpp) has a large conjugated surface similar to graphene, which can provide a stable substrate for the directional fixation of nucleic acid nanostructures. However, research on gap coupling plasmon based on nucleic acid nanostructures and 2D MOF is still rarely reported. By integrating the advantages of Cu-Tcpp assembled film and DNA tetrahedron immobilization, a nano gap with porous scaffold structure between the gold film and gold nanorod was build. The rigidity of DNA tetrahedron can precisely control the gap size, and its unique programmability allows us to give the coupling structure greater flexibility through the design of nucleic acid chain. The experimental results and FDTD simulation show that the film coupling nanoparticle systems constructed with DNA tetrahedrons greatly enhance the electric field strength near the chip surface and effectively improve the sensitivity of SPR. This research shows the huge potential of nucleic acid nanomaterials in the construction of SPR chip surface microstructures.

Light Absorption Analysis and Optimization of Ag@TiO2 Core-Shell Nanospheroid and Nanorod

For photothermal therapy of cancer, it is necessary to find Ag @TiO2 core-shell nanoparticles that can freely tune the resonance wavelength within the near-infrared biological window. In this paper, the finite element method and the size-dependent refractive index of metal nanoparticles were used to theoretically investigate the effects of the core material, core length, core aspect ratio, shell thickness, refractive index of the surrounding medium, and the particle orientation on the light absorption properties of Ag@TiO2 core-shell nanospheroid and nanorod. The calculations show that the position and intensity of the light absorption resonance peaks can be freely tuned within the first and second biological windows by changing the above-mentioned parameters. Two laser wavelengths commonly used in photothermal therapy, 808 nm (first biological window) and 1064 nm (second biological window), were selected to optimize the core length and aspect ratio of Ag@TiO2 core-shell nanospheroid and nanorod. It was found that the optimized Ag@TiO2 core-shell nanospheroid has a stronger light absorption capacity at the laser wavelengths of 808 nm and 1064 nm. The optimized Ag@TiO2 core-shell nanoparticles can be used as ideal therapeutic agents in photothermal therapy.

Gold nanorod-chitosan based nanocomposites for photothermal and chemoembolization therapy of breast cancer

Gold nanorods (AuNR) have received significant attention in tumor thermo-chemotherapy. However, insufficient thermal availability limits the in vivo highly efficient applications of AuNR in photothermal therapy. In this study, we have fabricated N-isopropylacrylamide grafted O-carboxymethyl chitosan nanoparticles (NCMC NPs) with thermo-responsive properties for co-encapsulating AuNR and doxorubicin (DOX), forming AuNR@NCMC/DOX nanocomposites (NCs). As a result of the thermo- and photothermal-responsiveness, AuNR@NCMC/DOX NCs exhibited irreversible aggregation at high temperature and under near-infrared (NIR) irradiation with an increase of size to 3 μm. When AuNR@NCMC/DOX NCs reached tumor sites following intravenous administration, they were located in the tumor vessels under NIR irradiation due to an embolization effect. This response enhanced tumor targeting, on-demand release, and the thermal performance of AuNR@NCMC/DOX NCs. We have observed higher tumor accumulation of DOX and AuNR with subsequent stronger inhibition of tumor growth than that achieved without NIR irradiation. The development of AuNR-based NCs with multiple smart responsivenesses at tumors can provide a promising paradigm for solid tumor treatment via the cooperative effects of photothermal therapy and chemoembolization.

In Situ Monitoring of Non-Thermal Plasma Cleaning of Surfactant Encapsulated Nanoparticles

Surfactants are widely used in the synthesis of nanoparticles, as they have a remarkable ability to direct their growth to obtain well-defined shapes and sizes. However, their post-synthesis removal is a challenge, and the methods used often result in morphological changes that defeat the purpose of the initial controlled growth. Moreover, after the removal of surfactants, the highly active surfaces of nanomaterials may undergo structural reconstruction by exposure to a different environment. Thus, ex situ characterization after air exposure may not reflect the effect of the cleaning methods. Here, combining X-ray photoelectron spectroscopy, in situ infrared reflection absorption spectroscopy, and environmental transmission electron microscopy measurements with CO probe experiments, we investigated different surfactant-removal methods to produce clean metallic Pt nanoparticles from surfactant-encapsulated ones. It was demonstrated that both ultraviolet-ozone (UV-ozone) treatment and room temperature O2 plasma treatment led to the formation of Pt oxides on the surface after the removal of the surfactant. On the other hand, when H2 was used for plasma treatment, both the Pt0 oxidation state and nanoparticle size distribution were preserved. In addition, H2 plasma treatment can reduce Pt oxides after O2-based treatments, resulting in metallic nanoparticles with clean surfaces. These findings provide a better understanding of the various options for surfactant removal from metal nanoparticles and point toward non-thermal plasmas as the best route if the integrity of the nanoparticle needs to be preserved.

Micro/nanosystems for controllable drug delivery to the brain

Drug delivery to the brain is crucial in the treatment for central nervous system disorders. While significant progress has been made in recent years, there are still major challenges in achieving controllable drug delivery to the brain. Unmet clinical needs arise from various factors, including controlled drug transport, handling large drug doses, methods for crossing biological barriers, the use of imaging guidance, and effective models for analyzing drug delivery. Recent advances in micro/nanosystems have shown promise in addressing some of these challenges. These include the utilization of microfluidic platforms to test and validate the drug delivery process in a controlled and biomimetic setting, the development of novel micro/nanocarriers for large drug loads across the blood-brain barrier, and the implementation of micro-intervention systems for delivering drugs through intraparenchymal or peripheral routes. In this article, we present a review of the latest developments in micro/nanosystems for controllable drug delivery to the brain. We also delve into the relevant diseases, biological barriers, and conventional methods. In addition, we discuss future prospects and the development of emerging robotic micro/nanosystems equipped with directed transportation, real-time image guidance, and closed-loop control.

Applications of Gold Nanoparticles in Plasmonic and Nanophotonic Biosensing

The unique properties of plasmonic nanoparticles and nanostructures have enabled a broad range of applications in a diverse set of fields, ranging from biological sensing, cancer therapy, to catalysis. They have been some of the most studied nanomaterials due in part to their chemical stability and biocompatibility as well as supporting theoretical efforts. The synthesis and fabrication of plasmonic nanoparticles and nanostructures have now reached high precision and sophistication. We review here their fundamental optical properties, discuss their tailoring for biological environments, and then detail examples on how they have been used to innovate in the biological and biomedical fields.

Engineering of copper sulfide mediated by phototherapy performance

Copper sulfide based phototherapy, including photothermal therapy and photodynamic therapy, is an emerging minimally invasive treatment of tumor, which the light was converted to heat or reactive oxygen to kill the tumor cells. Compared with conventional chemotherapy and radiation therapy, Cu2-x S based phototherapy is more efficient and has fewer side effects. However, considering the dose-dependent toxicity of Cu2-x S, the performance of Cu2-x S based phototherapy still cannot meet the requirement of the clinical application to now. To overcome this limitation, engineering of Cu2-x S to improve the phototherapy performance by increasing light absorption has attracted extensive attention. For better guidance of Cu2-x S engineering, we outline the currently engineering method being explored, including (1) structural engineering, (2) compositional engineering, (3) functional engineering, and (4) performance engineering. Also, the relationship between the engineering method and phototherapy performance was discussed in this review. In addition, the further development of Cu2-x S based phototherapy is prospected, including smart materials based phototherapy, phototherapy induced immune microenvironment modulation et al. This review will provide new ideas and opportunities for engineering of Cu2-x S with better phototherapy performance. This article is categorized under: Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

Molecular and cellular imaging of the eye

The application of molecular and cellular imaging in ophthalmology has numerous benefits. It can enable the early detection and diagnosis of ocular diseases, facilitating timely intervention and improved patient outcomes. Molecular imaging techniques can help identify disease biomarkers, monitor disease progression, and evaluate treatment responses. Furthermore, these techniques allow researchers to gain insights into the pathogenesis of ocular diseases and develop novel therapeutic strategies. Molecular and cellular imaging can also allow basic research to elucidate the normal physiological processes occurring within the eye, such as cell signaling, tissue remodeling, and immune responses. By providing detailed visualization at the molecular and cellular level, these imaging techniques contribute to a comprehensive understanding of ocular biology. Current clinically available imaging often relies on confocal microscopy, multi-photon microscopy, PET (positron emission tomography) or SPECT (single-photon emission computed tomography) techniques, optical coherence tomography (OCT), and fluorescence imaging. Preclinical research focuses on the identification of novel molecular targets for various diseases. The aim is to discover specific biomarkers or molecular pathways associated with diseases, allowing for targeted imaging and precise disease characterization. In parallel, efforts are being made to develop sophisticated and multifunctional contrast agents that can selectively bind to these identified molecular targets. These contrast agents can enhance the imaging signal and improve the sensitivity and specificity of molecular imaging by carrying various imaging labels, including radionuclides for PET or SPECT, fluorescent dyes for optical imaging, or nanoparticles for multimodal imaging. Furthermore, advancements in technology and instrumentation are being pursued to enable multimodality molecular imaging. Integrating different imaging modalities, such as PET/MRI (magnetic resonance imaging) or PET/CT (computed tomography), allows for the complementary strengths of each modality to be combined, providing comprehensive molecular and anatomical information in a single examination. Recently, photoacoustic microscopy (PAM) has been explored as a novel imaging technology for visualization of different retinal diseases. PAM is a non-invasive, non-ionizing radiation, and hybrid imaging modality that combines the optical excitation of contrast agents with ultrasound detection. It offers a unique approach to imaging by providing both anatomical and functional information. Its ability to utilize molecularly targeted contrast agents holds great promise for molecular imaging applications in ophthalmology. In this review, we will summarize the application of multimodality molecular imaging for tracking chorioretinal angiogenesis along with the migration of stem cells after subretinal transplantation in vivo.

Advances in three dimensional metal enhanced fluorescence based biosensors using metal nanomaterial and nano-patterned surfaces

Metal enhanced fluorescence (MEF) is a phenomenon that increases fluorescence signal through placement of metal near a fluorophore. For biosensing applications, MEF-based biosensors are becoming increasingly popular as it enables highly sensitive detection of molecules, important for early diagnosis. The structure and size of the metal influence the optical properties through enhancing the fluorophore photostability and light absorption and emission. In recent years, many metal nanostructures have been fabricated and examined for their effectiveness in developing MEF-based biosensors. This review focuses on the latest applications of three-dimensional nanostructures and nano-patterned surfaces used to develop and improve fluorescence sensing via MEF. Current reviews mostly discussed the applications of two dimensional MEF and metal-nanoparticles-based MEF with a focus on fabrication of nanoparticles and metal substrates. In this article, we focused more on the effect of the metal nanostructure and size on MEF and then provided an in-depth summary of the performance of the state-of-the-art three dimensional MEF-based biosensors. While more work is needed to demonstrate applicability for complex samples, it is evident that with the use of metal nanoparticles and three dimensional nano-patterns, the assay sensitivity of fluorescence-based detection can be greatly improved, making it suitable for use in early disease diagnostics.

Transition metal dichalcogenide coated gold nanoshells for highly effective photothermal therapy

Transition metal dichalcogenides (TMD) coated gold nanoshells (GNSs), in addition to having low cytotoxicity and a biocompatibility value greater than graphene, exhibit strong light absorption in the near-infrared (NIR) region and high photothermal conversion efficiency. Using a quasi-static approach and bioheat equations, the optical and photothermal properties of GNSs coated with various TMDs are studied for treatment of skin cancer. Our findings show that the intensity of localized surface plasmon resonance (LSPR) peaks and their position in the extinction spectrum of nanoparticles (NPs) can be easily tuned within biological windows by varying the core radius, the gold shell thickness and the number of coating layers of the different TMDs. In order to engineer heat production at designated spatial locations of NPs, near electric field (NEF) enhancement is investigated. Moreover, the effect of laser intensity and the number of TMD layers on the temperature rise and the amount of thermal damage in skin tumor tissue and its surroundings are studied. Our results introduce GNSs with various TMD coatings as superlative nanoagents for photothermal therapy (PTT) applications.

Near-infrared light activatable niosomes loaded with indocyanine green and plasmonic gold nanorods for theranostic applications

Light-mediated theranostic platforms involve the use of agents (small molecules/nanomaterials), which can absorb light to produce either heat or reactive chemical species (RCS) and emit fluorescence. Such platforms are advantageous in the field of personalized medicine, as they provide enhanced diagnostic capabilities, improved therapeutic efficiencies, and can also simultaneously monitor the treatment outcomes using imaging modalities. Specifically, agents absorbing near-infrared (NIR) light can provide minimal scattering, low autofluorescence, superior spatio-temporal resolution, and deeper tissue penetration depths. Gold nanorods (GNR) and indocyanine green (ICG) are two agents known to absorb light in the NIR region. GNR can provide tunable plasmonic properties, while ICG is an FDA-approved NIR fluorophore. However, the use of ICG and GNR suffers from various limitations, such as photobleaching, non-specificity, toxicity, and aggregation in solution. To overcome these limitations, herein, we report on NIR light-activatable niosomes loaded with GNR and ICG for cancer theranostic applications. Both agents were encapsulated into non-ionic surfactant-based biocompatible niosomes to form ICG-GNR@Nio with superior loading efficiencies and enhanced properties. ICG-GNR@Nio offers excellent storage stability, photostability, elevated temperature rise and generation of reactive oxygen species (ROS) upon 1064 nm laser irradiation. Subsequently, the enhanced phototherapeutic capabilities mediated by ICG-GNR@Nio were validated in the in vitro cellular experiments. Overall, ICG-GNR@Nio-based theranostic platforms can provide a significant benchmark in the improved diagnosis and therapeutic capabilities for biomedical clinicians to tackle various diseases.

Application of advanced biomaterials in photothermal therapy for malignant bone tumors

Malignant bone tumors are characterized by severe disability rate, mortality rate, and heavy recurrence rate owing to the complex pathogenesis and insidious disease progression, which seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment offering prominent hyperthermal therapeutic effects to enhance the effectiveness of surgical treatment and avoid recurrence. Simultaneously, various advanced biomaterials with photothermal capacity are currently created to address malignant bone tumors, performing distinctive biological functions, including nanomaterials, bioceramics (BC), polymers, and hydrogels et al. Furthermore, PTT-related combination therapeutic strategies can provide more significant curative benefits by reducing drug toxicity, improving tumor-killing efficiency, stimulating anti-cancer immunity, and improving immune sensitivity relative to monotherapy, even in complex tumor microenvironments (TME). This review summarizes the current advanced biomaterials applicable in PTT and relevant combination therapies on malignant bone tumors for the first time. The multiple choices of advanced biomaterials, treatment methods, and new prospects for future research in treating malignant bone tumors with PTT are generalized to provide guidance. Malignant bone tumors seriously affect the terminal quality of patients' lives. Photothermal therapy (PTT) has emerged as an attractive adjunctive treatment enhancing the effectiveness of surgical treatment and avoiding recurrence. In this review, advanced biomaterials applicable in the PTT of malignant bone tumors and their distinctive biological functions are comprehensively summarized for the first time. Simultaneously, multiple PTT-related combination therapeutic strategies are classified to optimize practical clinical issues, contributing to the selection of biomaterials, therapeutic alternatives, and research perspectives for the adjuvant treatment of malignant bone tumors with PTT in the future.

Application of nanomaterials as potential quorum quenchers for disease: Recent advances and challenges

Chemical signal molecules are used by bacteria to interact with one another. Small hormone-like molecules known as autoinducers are produced, released, detected, and responded to during chemical communication. Quorum Sensing (QS) is the word for this procedure; it allows bacterial populations to communicate and coordinate group behavior. Several research has been conducted on using inhibitors to prevent QS and minimize the detrimental consequences. Through the enzymatic breakdown of the autoinducer component, by preventing the formation of autoinducers, or by blocking their reception by adding some compounds (inhibitors) that can mimic the autoinducers, a technique known as "quorum quenching" (QQ) disrupts microbial communication. Numerous techniques, including colorimetry, electrochemistry, bioluminescence, chemiluminescence, fluorescence, chromatography-mass spectroscopy, and many more, can be used to test QS/QQ. They all permit quantitative and qualitative measurements of QS/QQ molecules. The mechanism of QS and QQ, as well as the use of QQ in the prevention of biofilms, are all elaborated upon in this writing, along with the fundamental study of nanoparticle (NP)in QQ. Q.

Combined Facile Synthesis, Purification, and Surface Functionalization Approach Yields Monodispersed Gold Nanorods for Drug Delivery Applications

Synthesizing gold nanorods (AuNRs) by seed-mediated growth method results in the presence of undesired size and shape particles by-products occupying 10-90% of the population. In this study, AuNRs are synthesized by the seed-mediated growth method using cetyltrimethylammonium bromide (CTAB) as a surfactant. AuNRs with redshifted longitudinal localized surface plasmon resonance (LLSPR) peak, localized in the biological "transparency window" (650-1350 nm), are synthesized after optimizing seed solution, silver nitrate solution, and hydrochloric acid solution volumes, based on the published protocols. A two-step purification method, dialysis followed by centrifugation, is applied to remove excess CTAB and collect LLSPR-redshifted AuNRs with high rod purity (>90%). CTAB is subsequently exchanged with polyethylene glycol (PEG) to improve AuNRs biocompatibility. PEGylated AuNRs are confirmed innocuous to both SN4741 cells and B16F10 cells by the modified MTT assay and the modified lactate dehydrogenase (LDH) assay up to 1 nm and 24 h incubation. In this study, a combined facile synthesis, purification, and surface functionalization approach is proposed to obtain water-dispersible monodispersed AuNRs for drug delivery applications.

The Creation of DNA Origami-Based Supramolecular Nanostructures for Cancer Therapy

DNA origami technology, a unique type of DNA nanotechnology, has attracted much attention from researchers and is applied in various fields. Through exquisite design and precise self-assembly of four kinds of deoxyribonucleotides, DNA origami nanostructures are endowed with excellent programmability and addressability and show outstanding biocompatibility in bio-related applications, especially in cancer treatment. In this review, nanomaterials based on DNA origami for cancer therapy are concluded, whereby chemotherapy and photo-assisted therapy are the main focus. Furthermore, the working mechanisms of the functional materials attached to the rigid DNA structures to enable targeted delivery and circumvent drug resistance are also discussed. DNA origami nanostructures are valuable carriers for delivering multifunctional therapeutic agents and demonstrate great potential in cancer treatment both in vitro and in vivo. It is undoubted that DNA origami technology is a promising strategy for constructing versatile nanodevices in biological fields and will excel in human healthcare.

Colon-Accumulated Gold Nanoclusters Alleviate Intestinal Inflammation and Prevent Secondary Colorectal Carcinogenesis via Nrf2-Dependent Macrophage Reprogramming

Inflammatory bowel disease (IBD) is one of the main factors leading to colitis-associated colorectal cancer (CAC). Therefore, it is critical to develop an effective treatment for IBD to prevent secondary colorectal carcinogenesis. M2 macrophages play crucial roles in the resolution phase of intestinal inflammation. However, traditional drugs rarely target intestinal M2 macrophages, and they are not easily cleared. Gold nanoclusters are known for their in vivo safety and intrinsic biomedical activities. In this study, a glutathione-protected gold nanocluster is synthesized and evaluated, namely, GA. Interestingly, GA specifically accumulates in the colon during IBD. Furthermore, GA not only promotes M2 differentiation of IL-4-treated peritoneal macrophages but also reprograms macrophage polarization from M1 to M2 in a pro-inflammatory environment. Mechanistically, this regulatory effect is exerted through activating the antioxidant Nrf2 signaling pathway, but not traditional STAT6. When applied in IBD mice, we found that GA elevates M2 macrophages and alleviates IBD in an Nrf2-dependent manner, evidenced by the abolished therapeutic effect upon Nrf2 inhibitor treatment. Most importantly, GA administration significantly suppresses AOM/DSS-induced CAC, without causing obvious tissue damage, providing critical evidence for the potential application of gold nanoclusters as nanomedicine for the treatment of IBD and CAC.

Hybrid Polymer Vesicles: Controllable Preparation and Potential Applications

Hybrid polymer vesicles contain functional nanoparticles (NPs) in their walls, interfaces, coronae, or cavities. NPs render the hybrid vesicles with specific physical properties, while polymers endow them with structural stability and may significantly reduce the high toxicity of NPs. Therefore, hybrid vesicles integrate fascinating multifunctions from both NPs and polymeric vesicles, which have gained tremendous attention because of their diverse promising applications. Various types of delicate hybrid polymeric vesicles with size control and tunable localization of NPs in different parts of vesicles have been constructed via in situ and ex situ strategies, respectively. Their potential applications have been widely explored, as well. This review presents the progress of block copolymer (BCP) vesicle systems containing different types of NPs including metal NPs, magnetic NPs, and semiconducting quantum dots (QDs), etc. The strategies for controlling the location of NPs within hybrid vesicles are discussed. Typical potential applications of the elegant hybrid vesicles are also highlighted.

Two-photon nanoprobes based on bioorganic nanoarchitectonics with a photo-oxidation enhanced emission mechanism

Two-photon absorption (TPA) fluorescence imaging holds great promise in diagnostics and biomedicine owing to its unparalleled spatiotemporal resolution. However, the adaptability and applicability of currently available TPA probes, which act as a critical element for determining the imaging contrast effect, is severely challenged by limited photo-luminescence in vivo. This is particularly a result of uncontrollable aggregation that causes fluorescence quenching, and inevitable photo-oxidation in harsh physiological milieu, which normally leads to bleaching of the dye. Herein, we describe the remarkably enhanced TPA fluorescence imaging capacity of self-assembling near-infrared (NIR) cyanine dye-based nanoprobes (NPs), which can be explained by a photo-oxidation enhanced emission mechanism. Singlet oxygen generated during photo-oxidation enables chromophore dimerization to form TPA intermediates responsible for enhanced TPA fluorescence emission. The resulting NPs possess uniform size distribution, excellent stability, more favorable TPA cross-section and anti-bleaching ability than a popular TPA probe rhodamine B (RhB). These properties of cyanine dye-based TPA NPs promote their applications in visualizing blood circulation and tumoral accumulation in real-time, even to cellular imaging in vivo. The photo-oxidation enhanced emission mechanism observed in these near-infrared cyanine dye-based nanoaggregates opens an avenue for design and development of more advanced TPA fluorescence probes.

Plasmonic nanomaterials-based flexible strips for the SERS detection of gouty arthritis

Flexible biochips that enable sensitive detection and simultaneous quantification of biomarkers are of great importance in the field of point-of-care testing. Recently, surface-enhanced Raman scattering (SERS)-based flexible biochips have attracted a great deal of research attention for disease detection due to their rapid, sensitive, and noninvasive sensing abilities. Phenomenal progress in the synthesis of structure-controlled plasmonic nanomaterials has made SERS a powerful sensing platform for disease diagnosis and trace detection. Here, we demonstrate flexible plasmonic biochips for the SERS-based detection of uric acid (UA). Flexible strips exhibited excellent sensing performance with a detection limit of around 10 μM of UA, which is lower than the average level of UA in tears. This rapid and sensitive detection method enables the noninvasive diagnosis of gouty arthritis.

Controlled synthesis of monodisperse gold nanorods with a small diameter of around 10 nm and largest plasmon wavelength of 1200 nm

Gold nanorods have been widely used in various fields due to their tunable anisotropic localized surface plasmon resonance (SPR) property. The facile preparation of gold nanorods with a tunable SPR wavelength extending to a near-infrared window, and at the same time, a relatively small particle size for facilitating applications especially in the biomedical field is of great value yet highly challenging. In this work, a new reducing agent, 1,6-dihydroxynaphthalene, is proposed for the synthesis of gold nanorods. The results indicate that gold nanorods with good monodispersity, high shape yield, maximum SPR wavelength of 1200 nm, and especially small diameter of around 10 nm can be acquired simultaneously. In terms of spectral and size controls, by respectively varying the experimental parameters including the amount of silver ions, reducing agents, and gold seeds not only can a good linear correlation be acquired corresponding to a SPR wavelength ranging from around 600 nm to 1200 nm, but a regular change in the particle diameter from 10.5 nm to 7.5 nm could also be observed. The structural and morphological evolutions of the particle for each changed parameter were carefully studied, and insights were gained into the growth mechanism based on the detailed analysis of particle evolution at a specific stage of the growth process.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

High-performance homogeneous carboxymethylcellulose-stabilized Au@Ag NRs-CMC surface-enhanced Raman scattering chip for thiram detection in fruits

Cellulose material holds considerable promise for effective surface-enhanced Raman scattering (SERS) substrate construction due to its extensive availability, chemically modifying capacity, ease of manufacture, high flexibility and low optical activity. A large-area, high-sensitivity, stable and uniform Au@Ag nanorods (NRs)-CMC substrate was successfully developed via electrostatic repulsion by using negatively-charged core-shell Au@Ag NRs as SERS active plasmonic nanomaterial, combined with negatively-charged carboxymethylcellulose (CMC) hydrogel for nanoparticles stabilization, homodisperse and protection. The obtained Au@Ag NRs-CMC substrate showed excellent sensitivity for the detection of thiram residues in fruits containing low and abundant pigment interferents, such as apples and blueberries, with detection limits of 58 and 78 ppb, respectively. Additionally, it retained more than 80% SERS performance after storage for 9 months under ambient conditions, demonstrating its great potential in facilitating the commercialization of cellulose-based SERS technology for cost-effective detection of food contaminants with advantages of facile preparation procedure, uniformity, reproducibility and long-term stability.

Spatiotemporal tracking of gold nanorods after intranasal administration for brain targeting

Intranasal administration is becoming increasingly more attractive as a fast delivery route to the brain for therapeutics circumventing the blood-brain barrier (BBB). Gold nanorods (AuNRs) demonstrate unique optical and biological properties compared to other gold nanostructures due to their high aspect ratio. In this study, we investigated for the first time the brain region-specific distribution of AuNRs and their potential as a drug delivery platform for central nervous system (CNS) therapy following intranasal administration to mice using a battery of analytical and imaging techniques. AuNRs were functionalized with a fluorescent dye (Cyanine5, Cy5) or a metal chelator (diethylenetriaminepentaacetic dianhydride, DTPA anhydride) to complex with Indium-111 via a PEG spacer for optical and nuclear imaging, respectively. Direct quantification of gold was achieved by inductively coupled plasma mass spectrometry. Rapid AuNRs uptake in mice brains was observed within 10 min following intranasal administration which gradually reduced over time. This was confirmed by the 3 imaging/analytical techniques. Autoradiography of sagittal brain sections suggested entry to the brain via the olfactory bulb followed by diffusion to other brain regions within 1 h of administration. The presence of AuNR in glioblastoma (GBM) tumors following intranasal administration was also proven which opens doors for AuNRs applications, as nose-to-brain drug delivery carriers, for treatment of a range of CNS diseases.

Immobilized nanoparticles-mediated enzyme therapy; promising way into clinical development

Enzyme (Enz)-mediated therapy indicated a remarkable effect in the treatment of many human cancers and diseases with an insight into clinical phases. Because of insufficient immobilization (Imb) approach and ineffective carrier, Enz therapeutic exhibits low biological efficacy and bio-physicochemical stability. Although efforts have been made to remove the limitations mentioned in clinical trials, efficient Imb-destabilization and modification of nanoparticles (NPs) remain challenging. NP internalization through insufficient membrane permeability, precise endosomal escape, and endonuclease protection following release are the primary development approaches. In recent years, innovative manipulation of the material for Enz immobilization (EI) fabrication and NP preparation has enabled nanomaterial platforms to improve Enz therapeutic outcomes and provide low-diverse clinical applications. In this review article, we examine recent advances in EI approaches and emerging views and explore the impact of Enz-mediated NPs on clinical therapeutic outcomes with at least diverse effects.

Site-Specific Antibody Assembly on Nanoparticles via a Versatile Coating Method for Improved Cell Targeting

Antibody-nanoparticle conjugates are promising candidates for precision medicine. However, developing a controllable method for conjugating antibodies to nanoparticles without compromising the antibody activity represents a critical challenge. Here, a facile and generalizable film-coating method is presented using zeolitic imidazole framework-8 (ZIF-8) to immobilize antibodies on various nanoparticles in a favorable orientation for enhanced cell targeting. Different model and therapeutic antibodies (e.g., Herceptin) are assembled on nanoparticles via a biomineralized film-coating method and exhibited high antibody loading and targeting efficiencies. Importantly, the antibodies selectively bind to ZIF-8 via their Fc regions, which favorably exposes the functional Fab regions to the biological target, thus improving the cell targeting ability of antibody-coated nanoparticles. In combination, molecular dynamics simulations and experimental studies on antibody immobilization, orientation efficiency, and biofunctionality collectively demonstrate that this versatile site-specific antibody conjugation method provides effective control over antibody orientation and leads to improved cell targeting for a variety of nanoparticles.

Gold Triangular Nanoprisms: Anisotropic Plasmonic Materials with Unique Structures and Properties

As a novel type of anisotropic inorganic nanomaterials, gold triangular nanoprisms (AuTNPs) have been widely studied for their well-defined structures and excellent plasmonic properties. This review starts with synthetic methodology, combing through the early thermal solution method to the mature seed-mediated method and seedless method. The possible mechanisms proposed by predecessors and the problems needed to be solved are also arranged. Along with this, the important morphological evolution process of AuTNPs during synthesis and post-synthesis stages are revealed, which is of great significance for further understanding the structure of AuTNPs and developing new synthesis strategies. Finally, the applications of AuTNPs, especially associated with plasmonic properties, are listed and summarized where surface-enhanced Raman scattering (SERS), catalysis, phototherapy and biosensor are included, so that researchers can quickly comprehend the current situation, and provide a basis for further development and exploration of AuTNPs.

Thermal Effect during Laser-Induced Plasmonic Heating of Polyelectrolyte-Coated Gold Nanorods in Well Plates

We examined the generation and transfer of heat when laser irradiation is applied to water containing a suspension of gold nanorods coated with different polyelectrolytes. The ubiquitous well plate was used as the geometry for these studies. The predictions of a finite element model were compared to experimental measurements. It is found that relatively high fluences must be applied in order to generate biologically relevant changes in temperature. This is due to the significant lateral heat transfer from the sides of the well, which strongly limits the temperature that can be achieved. A 650 mW continuous-wave (CW) laser, with a wavelength that is similar to the longitudinal plasmon resonance peak of the gold nanorods, can deliver heat with an overall efficiency of up to 3%. This is double the efficiency achievable without the nanorods. An increase in temperature of up to 15 °C can be achieved, which is suitable for the induction of cell death by hyperthermia. The nature of the polymer coating on the surface of the gold nanorods is found to have a small effect.

Multispectral Localized Surface Plasmon Resonance (msLSPR) Reveals and Overcomes Spectral and Sensing Heterogeneities of Single Gold Nanoparticles

Metal nanoparticles can be sensitive molecular sensors due to enhanced absorption and scattering of light near a localized surface plasmon resonance (LSPR). Variations in both intrinsic properties such as the geometry and extrinsic properties such as the environment can cause heterogeneity in nanoparticle LSPR and impact the overall sensing responses. To date, however, few studies have examined LSPR and sensing heterogeneities, due to technical challenges in obtaining the full LSPR spectra of individual nanoparticles in dynamic assays. Here, we report multispectral LSPR (msLSPR), a wide-field imaging technique for real-time spectral monitoring of light scattering from individual nanoparticles across the whole field of view (FOV) at ∼0.5 nm spectral and ∼100 ms temporal resolutions. Using msLSPR, we studied the spectral and sensing properties of gold nanoparticles commonly used in LSPR assays, including spheres, rods, and bipyramids. Complemented with electron microscopy imaging, msLSPR analysis revealed that all classes of gold nanoparticles exhibited variations in LSPR peak wavelengths that largely paralleled variations in morphology. Compared with the rods and spheres, gold nanobipyramids exhibited both more uniform and stronger sensing responses as long as the bipyramids are structurally intact. Simulations incorporating the experimental LSPR properties demonstrate the negative impact of spectral heterogeneity on the overall performance of conventional, intensity-based LSPR assays and the ability of msLSPR in overcoming both particle heterogeneity and measurement noise. These results highlight the importance of spectral heterogeneity in LSPR-based sensors and the potential advantage of performing LSPR assays in the spectral domain.

Highly Responsive Plasmon Modulation in Dopant-Segregated Nanocrystals

Electron transfer to and from metal oxide nanocrystals (NCs) modulates their infrared localized surface plasmon resonance (LSPR), revealing fundamental aspects of their photophysics and enabling dynamic optical applications. We synthesized and chemically reduced dopant-segregated Sn-doped In₂O₃ NCs, investigating the influence of radial dopant segregation on LSPR modulation and near-field enhancement (NFE). We found that core-doped NCs show large LSPR shifts and NFE change during chemical titration, enabling broadband modulation in LSPR energy of over 1000 cm^-1 and of peak extinction over 300%. Simulations reveal that the evolution of the LSPR spectra during chemical reduction results from raising the surface Fermi level and increasing the donor defect density in the shell region. These results establish dopant segregation as a useful strategy to engineer the dynamic optical modulation in plasmonic semiconductor NC heterostructures going beyond what is possible with conventional plasmonic metals.