Editable Supercapacitors with Customizable Stretchability Based on Mechanically Strengthened Ultralong MnO2 Nanowire Composite

Direct ink writing 3D printing of low-dimensional nanomaterials for micro-supercapacitors

Micro-supercapacitors (MSCs) have attracted significant attention for potential applications in miniaturized electronics due to their high power density, rapid charge/discharge rates, and extended lifespan. Despite the unique properties of low-dimensional nanomaterials, which hold tremendous potential for revolutionary applications, effectively integrating these attributes into MSCs presents several challenges. 3D printing is rapidly emerging as a key player in the fabrication of advanced energy storage devices. Its ability to design, prototype, and produce functional devices incorporating low-dimensional nanomaterials positions it as an influential technology. In this review, we delve into recent advancements and innovations in micro-supercapacitor manufacturing, with a specific focus on the incorporation of low-dimensional nanomaterials using direct ink writing (DIW) 3D printing techniques. We highlight the distinct advantages offered by low-dimensional nanomaterials, from quantum effects in 0D nanoparticles that result in high capacitance values to rapid electron and ion transport in 1D nanowires, as well as the extensive surface area and mechanical flexibility of 2D nanosheets. Additionally, we address the challenges encountered during the fabrication process, such as material viscosity, printing resolution, and seamless integration of active materials with current collectors. This review highlights the remarkable progress in the energy storage sector, demonstrating how the synergistic use of low-dimensional nanomaterials and 3D printing technologies not only overcomes existing limitations but also opens new avenues for the development and production of advanced micro-supercapacitors. The convergence of low-dimensional nanomaterials and DIW 3D printing heralds the advent of the next generation of energy storage devices, making a significant contribution to the field and laying the groundwork for future innovations.

Routes to high-performance layered oxide cathodes for sodium-ion batteries

Sodium-ion batteries (SIBs) are experiencing a large-scale renaissance to supplement or replace expensive lithium-ion batteries (LIBs) and low energy density lead-acid batteries in electrical energy storage systems and other applications. In this case, layered oxide materials have become one of the most popular cathode candidates for SIBs because of their low cost and comparatively facile synthesis method. However, the intrinsic shortcomings of layered oxide cathodes, which severely limit their commercialization process, urgently need to be addressed. In this review, inherent challenges associated with layered oxide cathodes for SIBs, such as their irreversible multiphase transition, poor air stability, and low energy density, are systematically summarized and discussed, together with strategies to overcome these dilemmas through bulk phase modulation, surface/interface modification, functional structure manipulation, and cationic and anionic redox optimization. Emphasis is placed on investigating variations in the chemical composition and structural configuration of layered oxide cathodes and how they affect the electrochemical behavior of the cathodes to illustrate how these issues can be addressed. The summary of failure mechanisms and corresponding modification strategies of layered oxide cathodes presented herein provides a valuable reference for scientific and practical issues related to the development of SIBs.

Nanorod-like Bimetallic Oxide for Enhancing the Performance of Supercapacitor Electrodes

Supercapacitors are widely used in many fields owing to their advantages, such as high power, good cycle performance, and fast charging speed. Among the many metal-oxide cathode materials reported for supercapacitors, NiMoO4 is currently the most promising electrode material for high-specific-energy supercapacitors. We have employed a rational design approach to create a nanorod-like NiMoO4 structure, which serves as a conductive scaffold for supercapacitors; the straightforward layout has led to outstanding results, with nanorod-shaped NiMoO4 exhibiting a remarkable capacity of 424.8 F g-1 at 1 A g-1 and an impressive stability of 80.2% capacity preservation even after 3500 cycles, which surpasses those of the majority of previously reported NiMoO4 materials. NiMoO4//AC supercapacitors demonstrate a remarkable energy density of 46.31 W h kg-1 and a power density of 0.75 kW kg-1. This synthesis strategy provides a facile method for the fabrication of bimetallic oxide materials for high-performance supercapacitors.

Introducing CuCo2S4 Nanoparticles on Reduced Graphene Oxide for High-Performance Supercapacitor

In this work, a bimetallic sulfide-coupled graphene hybrid was designed and constructed for capacitive energy storage. The hybrid structure involved decorating copper-cobalt-sulfide (CuCo2S4) nanoparticles onto graphene layers, with the nanoparticles anchored within the graphene layers, forming a hybrid energy storage system. In this hybrid structure, rGO can work as the substrate and current collector to support the uniform distribution of the nanoparticles and provides efficient transportation of electrons into and out of the electrode. In the meantime, CuCo2S4-active materials are expected to offer an evident enhancement in electrochemical activities, due to the rich valence change provided by Cu and Co. Benefiting from the integrated structure of CuCo2S4 nanoparticles and highly conductive graphene substrates, the prepared CuCo2S4@rGO electrode exhibited a favorable capacitive performance in 1 M KOH. At 1 A g-1, CuCo2S4@rGO achieved a specific capacitance of 410 F g-1. The capacitance retention at 8 A g-1 was 70% of that observed at 1 A g-1, affirming the material's excellent rate capability. At the current density of 5 A g-1, the electrode underwent 10,000 charge-discharge cycles, retaining 98% of its initial capacity, which indicates minimal capacity decay and showcasing excellent cycling performance.

Rapid production of silver nanofibers using a self-reducing solution

Silver nanofibers (Ag NFs) have gained considerable attention because of their high transmittance resulting from the size effect, excellent electrical conductivity, and mechanical properties. However, synthesizing high-quality Ag NFs remains a challenge. This paper reports a novel self-reducing solution that contains platinum nanoparticles for the rapid production of Ag NFs. The method involves generating the precursor NFs and heating them in air, which reduces silver nitrate to Ag NFs within a few minutes. The as-prepared solution is characterized by its simple preparation, cost-effectiveness, and broad applicability. Additionally, the use of high-pressure airflow to directly spin the solution and a complete self-reduction system that does not depend on external conditions broadens the application prospects of the as-developed solution. Furthermore, we provide insights into the self-reduction mechanism and guidance on the preparation of self-reducing solutions.

Facile Preparation of Carbon Nanotubes/Cellulose Nanofibrils/Manganese Dioxide Nanowires Electrode for Improved Solid-Sate Supercapacitor Performances

Wearable energy storage devices require high mechanical stability and high-capacitance flexible electrodes. In this study, we design a flexible supercapacitor electrode consisting of 1-dimensional carbon nanotubes (CNT), cellulose nanofibrils (CNF), and manganese dioxide nanowires (MnO2 NWs). The flexible and conductive CNT/CNF-MnO2 NWs suspension was first prepared via ultrasonic dispersion approach, followed by vacuum filtration and hot press to form the composite paper electrode. The morphological studies show entanglement between CNT and CNF, which supports the mechanical properties of the composite. The CNT/CNF-MnO2 NWs electrode exhibits lower resistance when subjected to various bending angles (-120-+120°) compared to the CNT/CNF electrode. In addition, the solid-state supercapacitor also shows a high energy density of 38 μWh cm-2 and capacitance retention of 83.2% after 5000 cycles.

Flexible High-Performance and Screen-Printed Symmetric Supercapacitor Using Hierarchical Rodlike V3O7 Inks

The emergence of the Internet of things stimulates the pursuit of flexible and miniaturized supercapacitors. As an advanced technology, screen printing displays vigor and tremendous potential in fabricating supercapacitors, but the adoption of high-performance ink is a great challenge. Here, hierarchical V3O7 with rodlike texture was prepared via a facile template-solvothermal route; and the morphology, component, and valence bond information are characterized meticulously. Then, the screen-printed inks composed of V3O7, acetylene black, and PVDF are formulated, and the rheological behaviors are studied detailedly. Benefitting from the orderly aligned ink, the optimal screen-printed electrode can exhibit an excellent specific capacitance of 274.5 F/g at 0.3 A/g and capacitance retention of 81.9% after 5000 cycles. In addition, a flexible V3O7 symmetrical supercapacitor (SSC) is screen-printed and assembled on the Ag current collector, exhibiting a decent areal specific capacitance of 322.5 mF/cm2 at 0.5 mA/cm2, outstanding cycling stability of 90.8% even after 5000 cycles, satisfactory maximum energy density of 129.45 μWh/cm2 at a power density of 0.42 mW/cm2, and remarkable flexibility and durability. Furthermore, a single SSC enables the showing of an actual voltage of 1.70 V after charging, and no obvious self-discharge phenomenon is found, revealing the great applied value in supply power. Therefore, this work provides a facile and low-cost reference of screen-printed ink for large-scale fabrication of flexible supercapacitors.

Structural engineering of electrodes for flexible energy storage devices

The emergence of multifunctional wearable electronics over the past decades has triggered the exploration of flexible energy storage devices. As an important component of flexible batteries, novel electrodes with good flexibility, mechanical stability and high energy density are required to adapt to mechanical deformation while powering devices. Electrodes with sophisticated designed structures are key to achieving novel batteries and supercapacitors with extended lifetimes under long-term deformation exposures. Many different novel structures including serpentine, auxetic and biomimetic are explored to construct electrodes thanks to their excellent mechanical deformability in three dimensions. This paper considers the various design strategies established for fabricating flexible electrodes using novel structural modifications. The current state-of-the-art developments of novel structures made of two-dimensional (2D) planar and three-dimensional (3D) cellular, interconnected architectures for flexible energy storage with different functionalities, are discussed. The key tunable geometrical parameters of structures for achieving high performance are critically assessed, and the challenges and limitations of electrodes facing their practical application are revealed, to offer new insights into future prospects of this field.

Technology Roadmap for Flexible Sensors

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Conductive Textiles for Signal Sensing and Technical Applications

Conductive textiles have found notable applications as electrodes and sensors capable of detecting biosignals like the electrocardiogram (ECG), electrogastrogram (EGG), electroencephalogram (EEG), and electromyogram (EMG), etc; other applications include electromagnetic shielding, supercapacitors, and soft robotics. There are several classes of materials that impart conductivity, including polymers, metals, and non-metals. The most significant materials are Polypyrrole (PPy), Polyaniline (PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), carbon, and metallic nanoparticles. The processes of making conductive textiles include various deposition methods, polymerization, coating, and printing. The parameters, such as conductivity and electromagnetic shielding, are prerequisites that set the benchmark for the performance of conductive textile materials. This review paper focuses on the raw materials that are used for conductive textiles, various approaches that impart conductivity, the fabrication of conductive materials, testing methods of electrical parameters, and key technical applications, challenges, and future potential.

Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

The rapid development of miniaturized electronic devices has greatly stimulated the endless pursuit of high-performance on-chip micro-supercapacitors (MSCs) delivering both high energy and power densities. To this end, an advanced three-dimensional (3D) microelectrode architecture design offers enormous opportunities due to high mass loading of active materials, large specific surface areas, fast ion diffusion kinetics, and short electron transport pathways. In this review, we summarize the recent advances in the rational design of 3D architectured microelectrodes including 3D dense microelectrodes, 3D nanoporous microelectrodes, and 3D macroporous microelectrodes. Furthermore, the emergent microfabrication strategies are discussed in detail in terms of charge storage mechanisms and structure-performance correlation for on-chip MSCs. Finally, we conclude with a perspective on future opportunities and challenges in this thriving field.

Transfer learning enhanced water-enabled electricity generation in highly oriented graphene oxide nanochannels

Harvesting energy from spontaneous water flow within artificial nanochannels is a promising route to meet sustainable power requirements of the fast-growing human society. However, large-scale nanochannel integration and the multi-parameter coupling restrictive influence on electric generation are still big challenges for macroscale applications. In this regard, long-range (1 to 20 cm) ordered graphene oxide assembled framework with integrated 2D nanochannels have been fabricated by a rotational freeze-casting method. The structure can promote spontaneous absorption and directional transmission of water inside the channels to generate considerable electric energy. A transfer learning strategy is implemented to address the complicated multi-parameters coupling problem under limited experimental data, which provides highly accurate performance optimization and efficiently guides the design of 2D water flow enabled generators. A generator unit can produce ~2.9 V voltage or ~16.8 μA current in a controllable manner. High electric output of ~12 V or ~83 μA is realized by connecting several devices in series or parallel. Different water enabled electricity generation systems have been developed to directly power commercial electronics like LED arrays and display screens, demonstrating the material's potential for development of water enabled clean energy.

NiO/Ni Nanowafer Aerogel Electrodes for High Performance Supercapacitors

Transition metal oxide aerogels are a fascinating class of compounds that have received considerable attention in the last decade owing to their unique and exceptional properties, including high porosity, large surface area, and ultralow density. In this study, α-Ni(OH)₂ aerogels and annealed NiO/Ni aerogels were used to design and fabricate a two-electrode supercapacitor device. The physicochemical properties of the as-synthesized aerogels were characterized through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, the Brunauer-Emmett-Teller theory, and X-ray photoelectron spectroscopy studies. The annealed NiO/Ni aerogels showed a (specific capacitance of 1060 F/g) specific capacity of 422 C/g at 1 A/g current density and with good cycling stability (up to 10,000 cycles). The supercapacitor also demonstrated an energy density of 32.4 Wh/kg and power density of 1800 W/kg at a current density of 2 A/g. The specific capacitance of NiO/Ni aerogels was more than twice that of the α-Ni(OH)₂ aerogels. The practical applications of the aerogel were demonstrated by fabricating a two-electrode device.

Polymerization-Driven Self-Wrinkling on a Frozen Hydrogel Surface toward Ultra-Stretchable Polypyrrole-Based Supercapacitors

The construction of ultra-stretchable and smart supercapacitors with a large deformation-tolerance range and highly efficient self-healability is fully desired for next-generation wearable electronics. Herein, a sandwich-structured self-wrinkling hydrogel film (SSHF) is fabricated by freezing-constrained polymerization-driven self-wrinkling. Polypyrrole layers are first polymerized on a frozen pre-stretching hydrogel surface and subsequently self-wrinkled upon releasing the pre-strain. The SSHF with two polypyrrole electrode layers sandwiched with a hydrogel electrolytic layer is finally achieved by cutting four edges, and the all-in-one integrated structure creatively avoids the delamination between the electrodes and the electrolyte. The as-obtained SSHF can be directly used as an integrated all-in-one supercapacitor demonstrating high specific capacitance (79.5 F g^-1 at 0.5 A g^-1), large stretchability (>500%), and reliable room temperature self-healability. The freezing-constrained polymerization-driven self-wrinkling strategy might provide a unique self-wrinkling procedure to fabricate self-healable conducting polymer-based hydrogels for ultra-stretchable smart supercapacitors.

Soft Robots' Dynamic Posture Perception Using Kirigami-Inspired Flexible Sensors with Porous Structures and Long Short-Term Memory (LSTM) Neural Networks

Soft robots can create complicated structures and functions for rehabilitation. The posture perception of soft actuators is critical for performing closed-loop control for a precise location. It is essential to have a sensor with both soft and flexible characteristics that does not affect the movement of a soft actuator. This paper presents a novel end-to-end posture perception method that employs flexible sensors with kirigami-inspired structures and long short-term memory (LSTM) neural networks. The sensors were developed with conductive sponge materials. With one-step calibration from the sensor output, the posture of the soft actuator could be calculated by the LSTM network. The method was validated by attaching the developed sensors to a soft fiber-reinforced bending actuator. The results showed the accuracy of posture prediction of sponge sensors with three kirigami-inspired structures ranged from 0.91 to 0.97 in terms of R2. The sponge sensors only generated a resistive torque value of 0.96 mNm at the maximum bending position when attached to a soft actuator, which would minimize the effect on actuator movement. The kirigami-inspired flexible sponge sensor could in future enhance soft robotic development.

Arrayed Heterostructures of MoS2 Nanosheets Anchored TiN Nanowires as Efficient Pseudocapacitive Anodes for Fiber-Shaped Ammonium-Ion Asymmetric Supercapacitors

Nonmetallic ammonium ions that feature high safety, low molar mass, and small hydrated radius properties have shown great advantages in wearable aqueous supercapacitors. The construction of high-energy-density flexible ammonium-ion asymmetric supercapacitors (AASCs) is promising but still challenging due to the lack of high-capacitance pseudocapacitive anodes. Herein, freestanding core-shell heterostructures supported on carbon nanotube fibers were designed by anchoring MoS₂ nanosheets on nanowires (MoS₂@TiN/CNTF) as anodes for AASCs. With contributions of abundant active sites and conspicuous synergistic effects of multiple components for arrayed heterostructure engineering, the developed MoS₂@TiN/CNTF anodes exhibit a specific capacitance of 1102.5 mF cm^-2 at 2 mA cm^-2. Theoretical calculations confirm the dramatic enhancement of the binding strength of ammonium ions on the MoS₂ shell layer at the heterostructure, where a built-in electric field exists to accelerate the charge transfer. By utilizing a MnO₂/CNTF cathode and NH₄Cl/poly(vinyl alcohol) (PVA) as a gel electrolyte, quasi-solid-state fiber-shaped AASCs were successfully constructed, achieving a specific capacitance of 351.2 mF cm^-2 and an energy density of 195.1 μWh cm^-2, outperforming most recently reported fiber-shaped supercapacitors. This work provides a promising strategy to rationally design heterostructure engineering of MoS₂@TiN nanoarrays toward advanced anodes for application in next-generation AASCs.

Mechano-Regulable and Healable Silk-Based Materials for Adaptive Applications

Mechanically adaptive materials responsive to environmental stimuli through changing mechanical properties are highly attractive in intelligent devices. However, it is hard to regulate the mechanical properties of most mechanically adaptive materials in a facile way. Moreover, it remains a challenge to achieve mechano-regulable materials with mechanical properties ranging from high strength to extreme toughness. Here, inspired by the reversible nanofibril network structure of skeletal muscle to achieve muscle strength regulation, we present a mechano-regulable biopolymeric silk fibroin (SF) composite through regulating dynamic metal-ligand coordination bonds by using water molecules as competitive regulators. Efficient interfacial hydrogen bonds between tannic acid-tungsten disulfide nanohybrids and the SF matrix endow the composite with high mechanical strength and self-healing ability. The resulting composite exhibits 837-fold change in Young's modulus (5.77 ± 0.61 GPa to 6.89 ± 0.64 MPa) after water vapor triggering, high mechanical properties (72.5 ± 6.3 MPa), and excellent self-healing efficiency (nearly 100%). The proof-of-concept ultraconformable iontronic skin and smart actuators are demonstrated, thereby providing a direction for future self-adaptive smart device applications.

Self-Healing and Shape-Editable Wearable Supercapacitors Based on Highly Stretchable Hydrogel Electrolytes

Shape editability combined with a self-healing capability and long-term cycling durability are highly desirable properties for wearable supercapacitors. Most wearable supercapacitors have rigid architecture and lack the capacity for editability into desirable shapes. Through sandwiching hydrogel electrolytes between two electrodes, a suite of wearable supercapacitors that integrate desirable properties namely: repeated shape editability, excellent self-healing capability, and long-term cycling durability is demonstrated. A strategy is proposed to enhance the long-term cycling durability by utilizing hydrogel electrolytes with unique cross-linking structures. The dynamic crosslinking sites are formed by quadruple H bonds and hydrophobic association, stabilizing the supercapacitors from inorganic ion disruption during charge-discharge processes. The fabricated supercapacitors result in the capacitance retention rates of 99.6% and 95.8% after 5000 and 10 000 charge-discharge cycles, respectively, which are much higher than others reported in the literature. Furthermore, the supercapacitor sheets can be repeatedly processed into various shapes without any capacitance loss. The supercapacitors exhibit a 95% capacitance retention rate after five cutting/self-healing cycles, indicative of their excellent self-healing performance. To demonstrate real-life applicability, the wearable supercapacitors are successfully used to power a light-emitting diode and an electronic watch.

Fabrication and Conductive Mechanism Analysis of Stretchable Electrodes Based on PDMS-Ag Nanosheet Composite with Low Resistance, Stability, and Durability

A flexible and stretchable electrode based on polydimethylsiloxane (PDMS)-Ag nanosheet composite with low resistance and stable properties has been investigated. Under the synergistic effect of the excellent flexibility and stretchability of PDMS and the excellent electrical conductivity of Ag nanosheets, the electrode possesses a resistivity as low as 4.28 Ωm, a low resistance variation in the 0–50% strain range, a stable electrical conductivity over 1000 cycles, and a rapid recovery ability after failure caused by destructive large stretching. Moreover, the conductive mechanism of the flexible electrode during stretching is explained by combining experimental tests, theoretical models of contact point-tunneling effect, and finite element simulation. This research provides a simple and effective solution for the structure design and material selection of flexible electrodes, and an analytical method for the conductive mechanism of stretchable electrodes, which has potential for applications in flexible electronic devices, smart sensing, wearable devices, and other fields.

Strain-Driven Auto-Detachable Patterning of Flexible Electrodes

Flexible electrodes that are multilayer, multimaterial, and conformal are pivotal for multifunctional wearable electronics. Traditional electronic circuits manufacturing requires substrate-supported transfer printing, which limits their multilayer integrity and device conformability on arbitrary surfaces. Herein, a "shrinkage-assisted patterning by evaporation" (SHAPE) method is reported, by employing evaporation-induced interfacial strain mismatch, to fabricate auto-detachable, freestanding, and patternable electrodes. The SHAPE method utilizes vacuum-filtration of polyaniline/bacterial cellulose (PANI/BC) ink through a masked filtration membrane to print high-resolution, patterned, and multilayer electrodes. The strong interlayer hydrogen bonding ensures robust multilayer integrity, while the controllable evaporative shrinking property of PANI/BC induces mismatch between the strains of the electrode and filtration membrane at the interface and thus autodetachment of electrodes. Notably, a 500-layer substrateless micro-supercapacitor fabricated using the SHAPE method exhibits an energy density of 350 mWh cm^-2 at a power density of 40 mW cm^-2 , 100 times higher than reported substrate-confined counterparts. Moreover, a digital circuit fabricated using the SHAPE method functions stably on a deformed glove, highlighting the broad wearable applications of the SHAPE method.

Surface-Alloyed Nanoporous Zinc as Reversible and Stable Anodes for High-Performance Aqueous Zinc-Ion Battery

Metallic zinc (Zn) is one of the most attractive multivalent-metal anode materials in post-lithium batteries because of its high abundance, low cost and high theoretical capacity. However, it usually suffers from large voltage polarization, low Coulombic efficiency and high propensity for dendritic failure during Zn stripping/plating, hindering the practical application in aqueous rechargeable zinc-metal batteries (AR-ZMBs). Here we demonstrate that anionic surfactant-assisted in situ surface alloying of Cu and Zn remarkably improves Zn reversibility of 3D nanoporous Zn electrodes for potential use as high-performance AR-ZMB anode materials. As a result of the zincophilic Zn_xCu_y alloy shell guiding uniform Zn deposition with a zero nucleation overpotential and facilitating Zn stripping via the Zn_xCu_y/Zn galvanic couples, the self-supported nanoporous Zn_xCu_y/Zn electrodes exhibit superior dendrite-free Zn stripping/plating behaviors in ambient aqueous electrolyte, with ultralow polarizations under current densities up to 50 mA cm^‒2, exceptional stability for 1900 h and high Zn utilization. This enables AR-ZMB full cells constructed with nanoporous Zn_xCu_y/Zn anode and K_zMnO₂ cathode to achieve specific energy of as high as ~ 430 Wh kg^‒1 with ~ 99.8% Coulombic efficiency, and retain ~ 86% after long-term cycles for > 700 h.

Prospects and Challenges of Flexible Stretchable Electrodes for Electronics

The application of flexible electronics in the field of communication has made the transition from rigid physical form to flexible physical form. Flexible electrode technology is the key to the wide application of flexible electronics. However, flexible electrodes will break when large deformation occurs, failing flexible electronics. It restricts the further development of flexible electronic technology. Flexible stretchable electrodes are a hot research topic to solve the problem that flexible electrodes cannot withstand large deformation. Flexible stretchable electrode materials have excellent electrical conductivity, while retaining excellent mechanical properties in case of large deformation. This paper summarizes the research results of flexible stretchable electrodes from three aspects: material, process, and structure, as well as the prospects for future development.

Co-MnO2 Nanorods for High-Performance Sodium/Potassium-Ion Batteries and Highly Conductive Gel-Type Supercapacitors

Manganese dioxide (MnO2 ) is considered as a strong candidate in the field of new-generation electronic equipment. Herein, Co-MnO2 has excellent electrochemical properties in tests as the cathode electrode of sodium-ion batteries and potassium-ion batteries. The rate performance remains at 50.2 mAh g-1 at 200 mA g-1 for sodium-ion batteries. X-ray diffraction (XRD) is utilized to evaluate the crystal structure transition from Co0.2 -MnO2 to NaMnO2 with discharge to 1 V, proving that Co-doping does indeed facilitate the acceleration of ion transport and support layer spacing to stabilize the structure of MnO2 . Subsequently, highly conductive (0.0848 S cm-1 ) gel-type supercapacitors are prepared by combining Co0.2 -MnO2 , potassium hydroxide (KOH), and poly(vinyl alcohol) (PVA) together. Co0.2 -MnO2 provides capacitive behavior and strengthens the hydrogen bonds between molecules. KOH acts as an ion crosslinker to enhance hydrogen bond and as electrolyte to transport ions. 5 wt% Co0.2 -MnO2 @KOH/PVA has superb mechanical endurance, appreciable electrical conductivity, and ideal capacitive behavior. The quasi-solid-state supercapacitor demonstrates stabilized longevity (86.5% at 0.2 mA cm-3 after 500 cycles), which can greatly promote the integration of flexible energy storage fabric devices.

Self-Supported Transition Metal-Based Nanoarrays for Efficient Energy Storage

Rechargeable batteries and supercapacitors are currently considered as promising electrochemical energy storage (EES) systems to address the energy and environment issues. Self-supported transition metal (Ni, Co, Mn, Mo, Cu, V)-based materials are promising electrodes for EES devices, which offer highly efficient charge transfer kinetics. This review summarizes the latest development of transition metal-based materials with self-supported structures for EES systems. Special focus has been taken on the synthetic methods, the selection of substrates, architectures and chemical compositions of different self-supported nanoarrays in energy storage systems. Finally, the challenges and opportunities of these materials for future development in this field are briefly discussed. We believe that the advancement in self-supported electrode materials would pave the way towards next-generation EES.

A Mechanically Interlocking Strategy Based on Conductive Microbridges for Stretchable Electronics

Stretchable electronics incorporating critical sensing, data transmission, display and powering functionalities, is crucial to emerging wearable healthcare applications. To date, methods to achieve stretchability of individual functional devices have been extensively investigated. However, integration strategies of these stretchable devices to achieve all-stretchable systems are still under exploration, in which the reliable stretchable interconnection is a key element. Here, solderless stretchable interconnections based on mechanically interlocking microbridges are developed to realize the assembly of individual stretchable devices onto soft patternable circuits toward multifunctional all-stretchable platforms. This stretchable interconnection can effectively bridge interlayer conductivity with tight adhesion through both conductive microbridges and selectively distributed adhesive polymer. Consequently, enhanced stretchability up to a strain of 35% (R/R₀  ≤ 5) is shown, compared with conventional solder-assisted connections which lose electrical conduction at a strain of less than 5% (R/R₀  ≈ 30). As a proof of concept, a self-powered all-stretchable data-acquisition platform is fabricated by surface mounting a stretchable strain sensor and a supercapacitor onto a soft circuit through solderless interconnections. This solderless interconnecting strategy for surface-mountable devices can be utilized as a valuable technology for the integration of stretchable devices to achieve all-soft multifunctional systems.

Cobalt-based metal-organic framework electrodeposited on nickel foam as a binder-free electrode for high-performance supercapacitors

Cobalt-based metal-organic framework (Co-MOF) has been in-situ grown on nickel foam (NF) by cathodic electrodeposition using highly active cobalt surface modifier to enable uniform nucleation and tight growth of Co-MOF....

Fabrication of Fe3O4-incorporated MnO2 nanoflowers as electrodes for enhanced asymmetric supercapacitor performance

Manganese dioxide (MnO2) is considered a promising aspirant for energy storage materials on account of its higher theoretical capacitance along with low capital cost.

Printed Zinc Paper Batteries

Paper electronics offer an environmentally sustainable option for flexible and wearable systems and perfectly fit the available printing technologies for high manufacturing efficiency. As the heart of energy-consuming devices, paper-based batteries are required to be compatible with printing processes with high fidelity. Herein, hydrogel reinforced cellulose paper (HCP) is designed to serve as the separator and solid electrolyte for paper batteries. The HCP can sustain higher strain than pristine papers and are biodegradable in natural environment within four weeks. Zinc-metal (Ni and Mn) batteries printed on the HCP present remarkable volumetric energy density of ≈26 mWh cm-3 , and also demonstrate the feature of cuttability and compatibility with flexible circuits and devices. As a result, self-powered electronic system could be constructed by integrating printed paper batteries with solar cells and light-emitting diodes. The result highlights the feasibility of hydrogel reinforced paper for ubiquitous flexible and eco-friendly electronics.

Nanostructure Engineering of Graphitic Carbon Nitride for Electrochemical Applications

Graphitic carbon nitride with ordered two-dimensional structure displays multiple properties, including tunable structure, suitable bandgap, high stability, and facile synthesis. Many achievements on this material have been made in photocatalysis, but the advantages have not yet been fully explored in electrochemical fields. The bulk structure with low conductivity impedes charge-transfer kinetics during electrochemical processes. Excessive nitrogen content leads to insufficient charge transfer, while bulk structures produce tortuous channels for mass transport. Some attempts have been made to address these issues by nanostructure engineering, such as ultrathin structure design, heterogeneous composition, defect engineering, and morphology control. These structure-engineered nanomaterials have been successfully applied in electrochemical fields, including ionic actuators, flexible supercapacitors, lithium-ion batteries, and electrochemical sensors. Herein, a timely review on the latest advances in graphitic carbon nitride through various engineering strategies for electrochemical applications has been summarized. A perspective on critical challenges and future research directions is highlighted for graphitic carbon nitride in electrochemistry on the basis of existing research works and our experimental experience.

Stretchable Energy Storage Devices Based on Carbon Materials

Stretchable energy storage devices are essential for developing stretchable electronics and have thus attracted extensive attention in a variety of fields including wearable devices and bioelectronics. Carbon materials, e.g., carbon nanotube and graphene, are widely investigated as electrode materials for energy storage devices due to their large specific surface areas and combined remarkable electrical and electrochemical properties. They can also be effectively composited with many other functional materials or designed into different microstructures for fabricating stretchable energy storage devices. This review summarizes recent advances toward the development of carbon-material-based stretchable energy storage devices. An overview of common carbon materials' fundamental properties and general strategies to enable the stretchability of carbon-material-based electrodes are presented. The performances of the as-fabricated stretchable energy storage devices including supercapacitors, lithium-ion batteries, metal-air batteries, and other batteries are then carefully discussed. Challenges and perspectives in this emerging field are finally highlighted for future studies.

Graphene-Based Nanomaterials for Flexible and Stretchable Batteries

Recently, as flexible and wearable electronic devices have become widely popular, research on light weight and large-capacity batteries suitable for powering such devices has been actively conducted. In particular, graphene has attracted considerable attention from researchers in the battery field owing to its good mechanical properties and its applicability in various processes to fabricate electrodes for batteries. Graphene is classified into two types: flake-type, fabricated from graphite, and film-type, synthesized using chemical vapor deposition. The unique processes involved in these two types enable the fabrication of flexible and stretchable batteries with various shapes and functions. In this article, the recent progress in the development of flexible and stretchable batteries based on graphene, as well as its important technical issues are reviewed.

Mechanomaterials: A Rational Deployment of Forces and Geometries in Programming Functional Materials

The knowledge of mechanics of materials has been extensively implemented in developing functional materials, giving rise to recent advances in soft actuators, flexible electronics, mechanical metamaterials, tunable mechanochromics, regenerative mechanomedicine, etc. While conventional mechanics of materials offers passive access to mechanical properties of materials in existing forms, a paradigm shift is emerging toward proactive programming of materials' functionality by leveraging the force-geometry-property relationships. Here, such a rising field is coined as "mechanomaterials". To profile the concept, the design principles in this field at four scales is first outlined, namely the atomic scale, the molecular scale, the manipulation of nanoscale materials, and the microscale design of structural materials. A variety of techniques have been recruited to deliver the multiscale programming of functional mechanomaterials, such as strain engineering, capillary assembly, topological interlocking, kirigami, origami, to name a few. Engineering optical and biological functionalities have also been achieved by implementing the fundamentals of mechanochemistry and mechanobiology. Nonetheless, the field of mechanomaterials is still in its infancy, with many open challenges and opportunities that need to be addressed. The authors hope this review can serve as a modest spur to attract more researchers to further advance this field.

Recent Development of Flexible and Stretchable Supercapacitors Using Transition Metal Compounds as Electrode Materials

Flexible and stretchable supercapacitors (FS-SCs) are promising energy storage devices for wearable electronics due to their versatile flexibility/stretchability, long cycle life, high power density, and safety. Transition metal compounds (TMCs) can deliver a high capacitance and energy density when applied as pseudocapacitive or battery-like electrode materials owing to their large theoretical capacitance and faradaic charge-storage mechanism. The recent development of TMCs (metal oxides/hydroxides, phosphides, sulfides, nitrides, and selenides) as electrode materials for FS-SCs are discussed here. First, fundamental energy-storage mechanisms of distinct TMCs, various flexible and stretchable substrates, and electrolytes for FS-SCs are presented. Then, the electrochemical performance and features of TMC-based electrodes for FS-SCs are categorically analyzed. The gravimetric, areal, and volumetric energy density of SC using TMC electrodes are summarized in Ragone plots. More importantly, several recent design strategies for achieving high-performance TMC-based electrodes are highlighted, including material composition, current collector design, nanostructure design, doping/intercalation, defect engineering, phase control, valence tuning, and surface coating. Integrated systems that combine wearable electronics with FS-SCs are introduced. Finally, a summary and outlook on TMCs as electrodes for FS-SCs are provided.

Printable Smart Materials and Devices: Strategies and Applications

Smart materials are a kind of functional materials which can sense and response to environmental conditions or stimuli from optical, electrical, magnetic mechanical, thermal, and chemical signals, etc. Patterning of smart materials is the key to achieving large-scale arrays of functional devices. Over the last decades, printing methods including inkjet printing, template-assisted printing, and 3D printing are extensively investigated and utilized in fabricating intelligent micro/nano devices, as printing strategies allow for constructing multidimensional and multimaterial architectures. Great strides in printable smart materials are opening new possibilities for functional devices to better serve human beings, such as wearable sensors, integrated optoelectronics, artificial neurons, and so on. However, there are still many challenges and drawbacks that need to be overcome in order to achieve the controllable modulation between smart materials and device performance. In this review, we give an overview on printable smart materials, printing strategies, and applications of printed functional devices. In addition, the advantages in actual practices of printing smart materials-based devices are discussed, and the current limitations and future opportunities are proposed. This review aims to summarize the recent progress and provide reference for novel smart materials and printing strategies as well as applications of intelligent devices.

Artificial Skin Perception

Skin is the largest organ, with the functionalities of protection, regulation, and sensation. The emulation of human skin via flexible and stretchable electronics gives rise to electronic skin (e-skin), which has realized artificial sensation and other functions that cannot be achieved by conventional electronics. To date, tremendous progress has been made in data acquisition and transmission for e-skin systems, while the implementation of perception within systems, that is, sensory data processing, is still in its infancy. Integrating the perception functionality into a flexible and stretchable sensing system, namely artificial skin perception, is critical to endow current e-skin systems with higher intelligence. Here, recent progress in the design and fabrication of artificial skin perception devices and systems is summarized, and challenges and prospects are discussed. The strategies for implementing artificial skin perception utilize either conventional silicon-based circuits or novel flexible computing devices such as memristive devices and synaptic transistors, which enable artificial skin to surpass human skin, with a distributed, low-latency, and energy-efficient information-processing ability. In future, artificial skin perception would be a new enabling technology to construct next-generation intelligent electronic devices and systems for advanced applications, such as robotic surgery, rehabilitation, and prosthetics.

Emerging intraoral biosensors

Biomedical devices that involved continuous and real-time health-care monitoring have drawn much attention in modern medicine, of which skin electronics and implantable devices are widely investigated. Skin electronics are characterized for their non-invasive access to the physiological signals, and implantable devices are superior at the diagnosis and therapy integration. Despite the significant progress achieved, many gaps remain to be explored to provide a more comprehensive overview of human health. As the connecting point of the outer environment and human systems, the oral cavity contains many unique biomarkers that are absent in skin or inner organs, and hence, this could become a promising alternative locus for designing health-care monitoring devices. In this review, we outline the status of the oral cavity during the communication of the environment and human systems and compare the intraoral devices with skin electronics and implantable devices from the biophysical and biochemical aspects. We further summarize the established diagnosis database and technologies that could be adopted to design intraoral biosensors. Finally, the challenges and potential opportunities for intraoral biosensors are discussed. Intraoral biosensors could become an important complement for existing biomedical devices to constitute a more reliable health-care monitoring system.

Scalable Assembly of Flexible Ultrathin All-in-One Zinc-Ion Batteries with Highly Stretchable, Editable, and Customizable Functions

Aqueous zinc-ion batteries (ZIBs) are considered to be a promising candidate for flexible energy storage devices due to their high safety and low cost. However, the scalable assembly of flexible ZIBs is still a challenge. Here, a scalable assembly strategy is developed to fabricate flexible ZIBs with an ultrathin all-in-one structure by combining blade coating with a rolling assembly process. Such a unique all-in-one integrated structure can effectively avoid the relative displacement or detachment between neighboring components to ensure continuous and effective ion- and/or loading-transfer capacity under external deformation, resulting in excellent structural and electrochemical stability. Furthermore, the ultrathin all-in-one ZIBs can be tailored and edited controllably into desired shapes and structures, further extending their editable, stretchable, and shape-customized functions. In addition, the ultrathin all-in-one ZIBs display the ability to integrate with perovskite solar cells to achieve an energy harvesting and storage integrated system. These enlighten a broad area of flexible ZIBs to be compatible with highly flexible and wearable electronics. The scaling-up assembly strategy provides a route to design other ultrathin all-in-one energy storage devices with stretchable, editable, and customizable behaviors.

Kirigami-Inspired Flexible and Stretchable Zinc-Air Battery Based on Metal-Coated Sponge Electrodes

The development of efficient and low-cost flexible metal electrodes is significant for flexible rechargeable zinc-air batteries (ZABs). Herein, we reported a new type of flexible metal (zinc and nickel) electrode fabricated via a two-step deposition method on polyurethane sponges (PUS) for flexible ZABs. Compared to conventional electrodes, the metal-coated PUS electrodes exhibited great flexibility, softness, and natural mechanical resilience. In addition, a flexible sandwich-structured ZAB was assembled with the metal-coated PUS electrodes and in situ cross-linked polyacrylic acid (PAA)-KOH hydrogel electrolyte. The flexible ZAB presented stable discharge/charge performance even under complex rolling and twisting deformations. Moreover, inspired by the kirigami-strategy for device-level stretchability, a 100% stretchable fence-shaped ZAB and a 160% stretchable serpentine-shaped ZAB were cut from the above-mentioned flexible ZABs. The kirigami-inspired configuration enabled the battery performance to be stable during stretching, benefiting from the softness of the PUS@metal electrode. These flexible and stretchable ZABs would broaden the promising applications for portable and wearable energy storage devices.

Flexible/Stretchable Supercapacitors with Novel Functionality for Wearable Electronics

With the miniaturization of personal wearable electronics, considerable effort has been expended to develop high-performance flexible/stretchable energy storage devices for powering integrated active devices. Supercapacitors can fulfill this role owing to their simple structures, high power density, and cyclic stability. Moreover, a high electrochemical performance can be achieved with flexible/stretchable supercapacitors, whose applications can be expanded through the introduction of additional novel functionalities. Here, recent advances in and future prospects for flexible/stretchable supercapacitors with innate functionalities are covered, including biodegradability, self-healing, shape memory, energy harvesting, and electrochromic and temperature tolerance, which can contribute to reducing e-waste, ensuring device integrity and performance, enabling device self-charging following exposure to surrounding stimuli, displaying the charge status, and maintaining the performance under a wide range of temperatures. Finally, the challenges and perspectives of high-performance all-in-one wearable systems with integrated functional supercapacitors for future practical application are discussed.

The Application of a Y-Modified Lanthanum Zirconate Flexible Thin Film for a High-Performance Flexible Supercapacitor

With the rapid development of wearable electronics devices, there is increasing demand for the development of new flexible energy storage devices with high security, and this has become a hot research topic. Although flexible supercapacitors are considered to be high-performance energy-storage equipment because of their fast charging/discharging ability, long cycle life, good reliability, wide operating temperature range, and so on, there are still many drawbacks that need to be overcome. Herein, the La₂ Zr₂ O₇ (LZO) thin film is synthesized as a new energy-storage material by using a facile electrospinning method and calcination at low temperature. In addition, the mechanism of producing the flexibility of this film is determined by TG, IR, and XRD analyses. As previous studies have suggested that the charge storage of the LZO film can be attributed to the mechanism of oxygen intercalation, the Y element is doped into the LZO film to increase the concentration of oxygen vacancies. The changes in structural and electrochemical properties of La₂ Y_x Zr_2-x O₃ (0≤x≤0.5) nanofibers (LNF-x) with increasing Y content are studied carefully to obtain the best doping sample. The LNF-0.1 sample shows the highest areal capacitance of 605.3 mF cm^-2 at 2 mA cm^-2 , so a symmetrical flexible device is fabricated with LNF-0.1 electrodes. This device has a high energy density (76.7 μW h cm^-2 at 2 mW cm^-2 ), good cycling stability, and excellent mechanical flexibility. This study thus provides a new research trend for portable and wearable electronics.

Three-Phase Boundary in Cross-Coupled Micro-Mesoporous Networks Enabling 3D-Printed and Ionogel-Based Quasi-Solid-State Micro-Supercapacitors

The construction of advanced micro-supercapacitors (MSCs) with both wide working-voltage and high energy density is promising but still challenging. In this work, a series of nitrogen-doped, cross-coupled micro-mesoporous carbon-metal networks (N-STC/M_x O_y ) is developed as robust additives to 3D printing inks for MSCs fabrication. Taking the N-STC/Fe₂ O₃ nanocomposite as an example, both experimental results and theoretical simulations reveal that the well-developed hierarchical networks with abundantly decorated ultrafine Fe₂ O₃ nanoparticles not only significantly facilitate the ion adsorption at its three-phase boundaries (Fe₂ O₃ , N-STC, and electrolyte), but also greatly favor ionic diffusion/transport with shortened pathways. Consequently, the as-prepared N-STC/Fe₂ O₃ electrode delivers a high gravimetric capacitance (267 F g^-1 at 2 mV s^-1 ) and outstanding stability in a liquid-electrolyte-based symmetric device, as well as a record-high energy density of 114 Wh kg^-1 for an asymmetric supercapacitor. Particularly, the gravimetric capacitance of the ionogel-based quasi-solid-state MSCs by 3D printing reaches 377 F g^-1 and the device can operate under a wide temperature range (-10 to 60 °C).

Enhanced Activity of Hierarchical Nanostructural Birnessite-MnO2-Based Materials Deposited onto Nickel Foam for Efficient Supercapacitor Electrodes

Hierarchical porous birnessite-MnO₂-based nanostructure composite materials were prepared on a nickel foam substrate by a successive ionic layer adsorption and reaction method (SILAR). Following composition with reduced graphene oxide (rGO) and multiwall carbon nanotubes (MWCNTs), the as-obtained MnO₂, MnO₂/rGO and MnO₂/rGO-MWCNT materials exhibited pore size distributions of 2-8 nm, 5-15 nm and 2-75 nm, respectively. For the MnO₂/rGO-MWCNT material in particular, the addition of MWCNT and rGO enhanced the superb distribution of micropores, mesopores and macropores and greatly improved the electrochemical performance. The as-obtained MnO₂/rGO-MWCNT/NF electrode showed a specific capacitance that reached as high as 416 F·g^-1 at 1 A·g^-1 in 1 M Na₂SO₄ aqueous electrolyte and also an excellent rate capability and high cycling stability, with a capacitance retention of 85.6% after 10,000 cycles. Electrochemical impedance spectroscopy (EIS) analyses showed a low resistance charge transfer resistance for the as-prepared MnO₂/rGO-MWCNT/NF nanostructures. Therefore, MnO₂/rGO-MWCNT/NF composites were successfully synthesized and displayed enhanced electrochemical performance as potential electrode materials for supercapacitors.

Fundamental Triangular Interaction of Electron Trajectory Deviation and P-N Junction to Promote Redox Reactions for the High-Energy-Density Electrode

Highly efficient redox reaction of active electrode materials is the guarantee for achieving high energy density for energy storage devices. Here, we design a triangle of the electrode material involving the P-N junction between NiO (p-type) and MoO₃ (n-type) and electron trajectory deviation between gold nanoparticles with NiO or MoO₃. This optimized fundamental triangle structure could facilitate the redox reaction of a metal oxide, and thus the fabricated ternary nanocomposites exhibit excellent electrochemical performance. At a lower current density (0.5 A g^-1), the mass specific capacitance of a single electrode can reach 943.3 F g^-1, while the NiO/MoO₃ tested under the same conditions only has a specific capacitance of 278.9 F g^-1. The assembled asymmetric device with activated carbon shows a higher capacitance retention rate of 98.7% after long-term cycling under different current densities, and a maximum energy density of 28.9 W h kg^-1 (power density of 400.1 W kg^-1). The crucial prerequisite of this strategy is the lower work function of gold nanoparticles compared with active materials, which significantly reduce the activation energy of NiO/MoO₃ and the formed P-N junction between p-type NiO with n-type MoO₃ in their contact interfaces. This novel design of a triangle structure could be expected to be applied in other materials to develop a kind of energy storage device with excellent electrochemical performance.

Microstructure Design of Carbonaceous Fibers: A Promising Strategy toward High-Performance Weaveable/Wearable Supercapacitors

Fiber-based supercapacitors (FSCs) possess great potential as an ideal type of power source for future weaveable/wearable electronics and electronic-textiles. The performance of FSCs is, without doubt, primarily determined by the properties of fibrous electrodes. Carbonaceous fibers, e.g., commercial carbon fibers, newly developed graphene fibers, and carbon nanotube fibers, are deemed as promising materials for weaveable/wearable supercapacitors owing to their exotic properties including high tensile strength and robustness, excellent electrical conductivity, good flexibility, and environmental stability. Nevertheless, bare carbonaceous fiber normally exhibits low capacitance originating from electric double-layer capacitance, which remains unsatisfactory for efficiently powering wearable and portable devices. Numerous efforts have been devoted to tailoring fiber properties by hybridizing pseudocapacitive materials, and impressive progress has been achieved thus far. Herein, the microstructures of pristine carbonaceous fibers are introduced in detail, and the recent advances in rational nano/microstructure design of their hybrids, which provides the feasibility to achieve the synergistic interaction between conductive agents and pseudocapacitive nanomaterials but are normally overlooked, are comprehensively reviewed. Besides, the challenges in developing high-performance fibrous electrodes are also elaborately discussed.

Hierarchical Manganese-Nickel Sulfide Nanosheet Arrays as an Advanced Electrode for All-Solid-State Asymmetric Supercapacitors

In this work, hierarchical manganese-nickel sulfide nanosheet arrays (Mn-Ni-S NAs) were designed through a cost-effective hydrothermal method, followed by an ion-exchange technique. Among the various electrode samples prepared, Mn-Ni-S NAs with a Mn/Ni feeding ratio of 1:2 (denoted Mn-Ni-S NAs (1:2)) were found to possess outstanding electrochemical properties, including a superb areal capacity of 0.687 mAh cm^-2 (286.3 mAh g^-1 specific capacity) and a splendid cycling stability. Furthermore, Mn-Ni-S NAs (1:2) can be coupled with iron oxide embedded in reduced graphene oxides (Fe₂O₃@rGO) to assemble all-solid-state asymmetric supercapacitor devices. The resultant device demonstrated superior volumetric capacity and a superb energy density of 76.6 W h kg^-1 with a prominent cycling stability. The current synthesis protocol provides a meritorious reference for the synthesis of other kinds of transition-metal sulfide electrode materials for energy storage applications.