Hetero-MXenes: Theory, Synthesis, and Emerging Applications

Covalent organic framework-functionalized magnetic MXene nanocomposite for efficient pre-concentration and detection of organophosphorus and organochlorine pesticides in tea samples before gas chromatography-triple quadrupole mass spectrometry analysis

In this study, a hydrophobic covalent organic framework-functionalized magnetic composite (CoFe2O4@Ti3C2@TAPB-TFTA) with a high specific area with 1,3,5-tris(4-aminophenyl)benzene (TAPB) and 2,3,5,6-tetrafluoroterephthalaldehyde (TFTA) was designed and synthesized through Schiff base reaction. An efficient magnetic solid-phase extraction method was established and combined with gas chromatography-triple quadrupole mass spectrometry to sensitively determine 10 organochlorine and organophosphorus pesticides in tea samples. The established method exhibited good linearity in the range of 0.05-120 μg/L and had low limits of detection (0.013-0.018 μg/L). The method was evaluated with tea samples, and the spiked recoveries of pesticides in different tea samples reached satisfactory values of 85.7-96.8%. Moreover, the adsorption of pesticides was spontaneous and followed Redlich-Peterson isotherm and pseudo-second-order kinetic models. These results demonstrate the sensitivity, effectiveness, and reliability of the proposed method for monitoring organochlorine and organophosphorus pesticides in tea samples, providing a preliminary basis for researchers to reasonably design adsorbents for the efficient extraction of pesticides.

Unraveling the Ionic Storage Mechanism of Flexible Nitrogen-Doped MXene Films for High-Performance Aqueous Hybrid Supercapacitors

2D MXene nanomaterials have excellent potential for application in novel electrochemical energy storage technologies such as supercapacitors and batteries, but the existing pure MXene is difficult to meet the practical needs. Although the electrochemical properties of modified MXene have been improved, the unclear ion storage mechanism still hinders the development of MXene-based electrode materials. Herein, the study develops flexible self-supported nitrogen-doped Ti3C2 (Py-Ti3C2) films by the highly mobile, high nitrogen content, oxygen-free pyridine-assisted solvothermal method, and then deeply investigates the energy storage mechanism of hybrid supercapacitors in four aqueous electrolytes (H2SO4, Li2SO4, Na2SO4, and MgSO4). The experimental results suggest that the Py-Ti3C2 film electrode exhibits a pseudocapacitance-dominated energy storage mechanism. Particularly, the specific capacity of the Py-Ti3C2 in 1 M H2SO4 (506 F g-1 at 0.1 A g-1) is 4-5 times higher than other electrolytes (≈110 F g-1), which could be attributed to the substantially higher ionic diffusion coefficient of H+ than those of Li+, Na+, Mg2+ with small ionic size, high ionic conductivity, and fast pseudocapacitance response. Theoretical analysis further confirms that Py-Ti3C2 has strengthened conductivity and electrical double-layer capacitance performance. Meanwhile, it has lower free energy for protonation and deprotonation of functional groups, which gives excellent pseudocapacitance performance.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering. The fundamental properties of MXenes including electronic, mechanical, optical, and thermal characteristics are discussed in detail. Different from previous review works on MXenes, multi-interface engineering of MXenes from termination regulation to surface modification and their impact on the performance of materials and energy storage/conversion devices are summarized. Based on the interfacial manipulation strategies, potential applications of MXene-based self-powered wearable devices are outlined. Finally, proposals and perspectives are provided on the current challenges and future directions in MXene-based self-powered wearable devices.

Fibres-threads of intelligence-enable a new generation of wearable systems

Fabrics represent a unique platform for seamlessly integrating electronics into everyday experiences. The advancements in functionalizing fabrics at both the single fibre level and within constructed fabrics have fundamentally altered their utility. The revolution in materials, structures, and functionality at the fibre level enables intimate and imperceptible integration, rapidly transforming fibres and fabrics into next-generation wearable devices and systems. In this review, we explore recent scientific and technological breakthroughs in smart fibre-enabled fabrics. We examine common challenges and bottlenecks in fibre materials, physics, chemistry, fabrication strategies, and applications that shape the future of wearable electronics. We propose a closed-loop smart fibre-enabled fabric ecosystem encompassing proactive sensing, interactive communication, data storage and processing, real-time feedback, and energy storage and harvesting, intended to tackle significant challenges in wearable technology. Finally, we envision computing fabrics as sophisticated wearable platforms with system-level attributes for data management, machine learning, artificial intelligence, and closed-loop intelligent networks.

Can Doped-MXene-Based Supercapacitors Be the Game-Changer for Future Energy Landscape? A Critical Perspective

MXene has attracted considerable attention for supercapacitor applications in the past decade owing to its exceptional electrochemical properties. Although major research interests are focused on composite-based MXene, doping engineering of MXene has recently emerged as a promising alternative. This work unveils the potential of doped MXene for supercapacitor applications with a critical perspective. Various doping engineering strategies and synthesis methods adopted are explicitly delineated. Detailed discussions on the optimization of lattice, functionalization, substitution, and interface modification are provided. Further, it sheds light on recent developments with the asssociated mechanism of doped MXene supercapacitors, followed by the associated challenges. Finally, a roadmap for further progress of doped MXene for the realization of advanced and high-performing energy storage systems has been described. We envision that this Perspective will open up new avenues for the further exploration of this domain.

Phase transition and electrochemical properties of S-functionalized MXene anodes for Li-ion batteries: a first-principles investigation

The advancement of anode materials for achieving high energy storage is a crucial topic for high-performance Li-ion batteries (LIBs). Here, first-principles calculations were used to conduct a thorough and systematic investigation into lithium storage properties of MXenes with new S functional groups as LIB anode materials. Density of states, diffusion energy barriers, open circuit voltages and storage capacities were calculated to comprehensively evaluate the lithium storage properties of S-functionalized MXenes. Based on the computational results, Ti2CS2 and V2CS2 were selected as excellent candidates from ten M2CS2 MXenes. The diffusion energy barriers of M2CS2 within the range of 0.26-0.32 eV are lower than those of M2CO2 and M2CF2, indicating that M2CS2 anodes exhibit faster charge/discharge rates. By examining the stable crystal structures and comparing atomic positions before and after Li adsorptions, structural phase transitions during Li-ion adsorptions could happen for nearly all M2CS2 MXenes. The phase transitions predicted were directly observed using ab initio molecular dynamic simulations. The cycle stability, storage capacity and other lithium storage properties were enhanced by the reversible structural phase transition.

A rising Layered Boride Family for Energy and Catalysis Applications: Novel Hexagonal MAB phases and MBenes

Over the past decade, conventional MAX phases and MXenes have garnered significant interest, primarily limited to carbides and/or nitrides. However, in 2019, the hexagonal ternary boride Ti2InB2 was successfully synthesized, sparking extensive research into hexagonal MAB (h-MAB) phases and their derived MBenes (h-MBenes). In recent years, h-MAB and h-MBenes have become focal points in the fields of physics, chemistry, and materials science. The unique properties and promising performances of h-MBenes in catalysis, energy storage, spintronics, and electrical devices underscore their considerable potential. Nonetheless, the exploration of h-MAB and h-MBenes is still in its nascent stages, with many anticipated properties and potentials yet to be fully explored. This article introduces the general concepts, crystal structure, and exfoliation properties of h-MAB phases, while also highlighting advancements in the synthesis and applications of h-MBenes. Finally, we discuss future challenges and prospects for the study of h-MAB and h-MBenes.

Additive-Free Anode with High Stability: Nb2CTx MXene Prepared by HCl-LiF Hydrothermal Etching for Lithium-Ion Batteries

MXenes, represented by Ti3C2Tx, have been widely studied in the electrochemical energy storage fields, including lithium-ion batteries, for their unique two-dimensional structure, tunable surface chemistry, and excellent electrical conductivity. Recently, Nb2CTx, as a new type of MXene, has attracted more and more attention due to its high theoretical specific capacity of 542 mAh g-1. However, the preparation of few-layer Nb2CTx nanosheets with high-quality remains a challenge, which limits their research and application. In this work, high-quality few-layer Nb2CTx nanosheets with a large lateral size and a high conductivity of up to 500 S cm-1 were prepared by a simple HCl-LiF hydrothermal etching method, which is 2 orders of magnitude higher than that of previously reported Nb2CTx. Furthermore, from its aqueous ink, the viscosity-tunable organic few-layer Nb2CTx ink was prepared by HCl-induced flocculation and N-methyl-2-pyrrolidone treatment. When using the organic few-layer Nb2CTx ink as an additive-free anode of lithium-ion batteries, it showed excellent cycling performance with a reversible specific capacity of 524.0 mAh g-1 after 500 cycles at 0.5 A g-1 and 444.0 mAh g-1 after 5000 cycles at 1 A g-1. For rate performance, a specific capacity of 159.8 mAh g-1 was obtained at a high current density of 5 A g-1, and an excellent capacity retention rate of about 95.65% was achieved when the current density returned to 0.5 A g-1. This work presents a simple and scalable process for the preparation of high-quality Nb2CTx and its aqueous/organic ink, which demonstrates important application potential as electrodes for electrochemical energy storage devices.

Advanced Insights on MXenes: Categories, Properties, Synthesis, and Applications in Alkali Metal Ion Batteries

The development and optimization of promising anode material for next-generation alkali metal ion batteries are significant for clean energy evolution. 2D MXenes have drawn extensive attention in electrochemical energy storage applications, due to their multiple advantages including excellent conductivity, robust mechanical properties, hydrophilicity of its functional terminations, and outstanding electrochemical storage capability. In this review, the categories, properties, and synthesis methods of MXenes are first outlined. Furthermore, the latest research and progress of MXenes and their composites in alkali metal ion storage are also summarized comprehensively. A special emphasis is placed on MXenes and their hybrids, ranging from material design and fabrication to fundamental understanding of the alkali ion storage mechanisms to battery performance optimization strategies. Lastly, the challenges and personal perspectives of the future research of MXenes and their composites for energy storage are presented.

Wet-Chemical Synthesis of Elemental 2D Materials

Wet-chemical synthesis refers to the bottom-up chemical synthesis in solution, which is among the most popular synthetic approaches towards functional two-dimensional (2D) materials. It offers several advantages, including cost-effectiveness, high yields,, precious control over the production process. As an emerging family of 2D materials, elemental 2D materials (Xenes) have shown great potential in various applications such as electronics, catalysts, biochemistry,, sensing technologies due to their exceptional/exotic properties such as large surface area, tunable band gap,, high carrier mobility. In this review, we provide a comprehensive overview of the current state-of-the-art in wet-chemical synthesis of Xenes including tellurene, bismuthene, antimonene, phosphorene,, arsenene. The current solvent compositions, process parameters utilized in wet-chemical synthesis, their effects on the thickness, stability of the resulting Xenes are also presented. Key factors considered involves ligands, precursors, surfactants, reaction time, temperature. Finally, we highlight recent advances, existing challenges in the current application of wet-chemical synthesis for Xenes production, provide perspectives on future improvement.

Binder-Free MOF-Based and MOF-Derived Nanoarrays for Flexible Electrochemical Energy Storage: Progress and Perspectives

The fast development of Internet of Things and the rapid advent of next-generation versatile wearable electronics require cost-effective and highly-efficient electroactive materials for flexible electrochemical energy storage devices. Among various electroactive materials, binder-free nanostructured arrays have attracted widespread attention. Featured with growing on a conductive and flexible substrate without using inactive and insulating binders, binder-free 3D nanoarray electrodes facilitate fast electron/ion transportation and rapid reaction kinetics with more exposed active sites, maintain structure integrity of electrodes even under bending or twisted conditions, readily release generated joule heat during charge/discharge cycles and achieve enhanced gravimetric capacity of the whole device. Binder-free metal-organic framework (MOF) nanoarrays and/or MOF-derived nanoarrays with high surface area and unique porous structure have emerged with great potential in energy storage field and been extensively exploited in recent years. In this review, common substrates used for binder-free nanoarrays are compared and discussed. Various MOF-based and MOF-derived nanoarrays, including metal oxides, sulfides, selenides, nitrides, phosphides and nitrogen-doped carbons, are surveyed and their electrochemical performance along with their applications in flexible energy storage are analyzed and overviewed. In addition, key technical issues and outlooks on future development of MOF-based and MOF-derived nanoarrays toward flexible energy storage are also offered.

Copper Phosphide Nanostructures Covalently Modified Ti3 C2 Tx for Fast Lithium-Ion Storage by Enhanced Kinetics and Pesudocapacitance

2D layer Ti3 C2 Tx material attracts enormous attention in lithium ion energy storage field owing to the unique surface chemistry properties, but the material still suffers from restacking issue and the restriction on capacity. Herein, copper phosphide (Cu3 P) nanostructures@Ti3 C2 Tx composites are prepared by the in situ generation of Cu-BDC precursor in the bulk material followed with phosphorization. The uniformly distributed copper phosphide nanostructures effectively expand the interlayer spacing promoting the structural stability, and achieves the effective connection with the bulk material accelerating the diffusion and migration of lithium ions. The electrochemical activity of Cu3 P also provides more lithium ion active sites for lithium storage. The X-ray photoelectron spectroscopy (XPS) analysis verifies that Ti─O─P bond with strong covalency allows the upper shift of maximum valence band and Fermi level, stimulating the charge transportation between Cu3 P and the bulk Ti3 C2 Tx for better electrode kinetics. 3Cu3 P@Ti3 C2 Tx exhibits excellent rate performance of 165.4 mAh g-1 at 3000 mA g-1 and the assembled 3Cu3 P@Ti3 C2 Tx //AC Lithium-ion hybrid capacitorsLIC exhibits superior energy density of 93.0 Wh kg-1 at the power density of 2367.3 W kg-1 . The results suggest that the interfacial modification of Ti3 C2 Tx with transition metal phosphides will be advantageous to its high energy density application in lithium-ion storage.

Dual-Atom Co/Ni Electrocatalyst Anchored at the Surface-Modified Ti3C2Tx MXene Enables Efficient Hydrogen and Oxygen Evolution Reactions

Dual-atom catalytic sites on conductive substrates offer a promising opportunity for accelerating the kinetics of multistep hydrogen and oxygen evolution reactions (HER and OER, respectively). Using MXenes as substrates is a promising strategy for depositing those dual-atom electrocatalysts, if the efficient surface anchoring strategy ensuring metal-substrate interactions and sufficient mass loading is established. We introduce a surface-modification strategy of MXene substrates by preadsorbing L-tryptophan molecules, which enabled attachment of dual-atom Co/Ni electrocatalyst at the surface of Ti3C2Tx by forming N-Co/Ni-O bonds, with mass loading reaching as high as 5.6 wt %. The electron delocalization resulting from terminated O atoms on MXene substrates, N atoms in L-tryptophan anchoring moieties, and catalytic metal atoms Co and Ni provides an optimal adsorption strength of intermediates and boosts the HER and OER kinetics, thereby notably promoting the intrinsic activity of the electrocatalyst. CoNi-Ti3C2Tx electrocatalyst displayed HER and OER overpotentials of 31 and 241 mV at 10 mA cm-2, respectively. Importantly, the CoNi-Ti3C2Tx electrocatalyst also exhibited high operational stability for both OER and HER over 100 h at an industrially relevant current density of 500 mA cm-2. Our study provided guidance for constructing dual-atom active metal sites on MXene substrates to synergistically enhance the electrochemical efficiency and stability of the energy conversion and storage systems.

MXene-Based Micro-Supercapacitors: Ink Rheology, Microelectrode Design and Integrated System

MXenes have shown great potential for micro-supercapacitors (MSCs) due to the high metallic conductivity, tunable interlayer spacing and intercalation pseudocapacitance. In particular, the negative surface charge and high hydrophilicity of MXenes make them suitable for various solution processing strategies. Nevertheless, a comprehensive review of solution processing of MXene MSCs has not been conducted. In this review, we present a comprehensive summary of the state-of-the-art of MXene MSCs in terms of ink rheology, microelectrode design and integrated system. The ink formulation and rheological behavior of MXenes for different solution processing strategies, which are essential for high quality printed/coated films, are presented. The effects of MXene and its compounds, 3D electrode structure, and asymmetric design on the electrochemical properties of MXene MSCs are discussed in detail. Equally important, we summarize the integrated system and intelligent applications of MXene MSCs and present the current challenges and prospects for the development of high-performance MXene MSCs.

Future prospects of MXenes: synthesis, functionalization, properties, and application in field effect transistors

MXenes are a family of two-dimensional (2D) materials that have drawn a lot of interest recently because of their distinctive characteristics and possible uses in a variety of industries. This review emphasizes the bright future prospects of MXene materials in the realm of FETs. Their remarkable properties, coupled with their tunability and compatibility, position MXenes as promising candidates for the development of high-performance electronic devices. As research in this field continues to evolve, the potential of MXenes to drive innovation in electronics becomes increasingly evident, fostering excitement for their role in shaping the future of electronic technology. This paper presents a comprehensive overview of MXene materials, focusing on their synthesis methods, functionalization strategies, intrinsic properties, and their promising application in Field Effect Transistors (FETs).

N/P co-doped MXene hollow microcapsules by surfactants assisted hydrothermal-freeze drying for adjustable permeability

The assembly of MXene materials into microcapsules has drawn great attentions due to their unique properties. However, rational design and synthesis of MXene-based microcapsules with specific nanostructures at the molecular scale remains challenging. Herein, we report a strategy to synthesize N/P co-doped MXene hollow flower-like microcapsules with adjustable permeability via dual surfactants assisted hydrothermal-freeze drying method. In contrast to anionic surfactants, cationic surfactants exhibited effective electrostatic interactions with MXene nanosheets during the hydrothermal process. Manipulation of dual surfactants in hydrothermal process realized N and P co-doping of MXene to improve flexibility and promoted the generation of abundant internal cavities in flower-like microcapsules. Based on the unique microstructure, the prepared hollow flower-like microcapsules showed excellent performance, stability and reusability in size-selective release of small organic molecules. Moreover, the release rate can be controlled by turning the oxidation state and type of MXene. The strategy delineates promising prospects for the design of MXene-based microcapsules with specific structures.

Direct Observation of Photon Induced Giant Band Renormalization in 2D PdSe2 Dichalcogenide by Transient Absorption Spectroscopy

Insight into fundamental light-matter interaction as well as underlying photo-physical processes is crucial for the development of novel optoelectronic devices. Palladium diselenide (PdSe2 ), an important representative of emerging 2D noble metal dichalcogenides, has gain considerable attention owing to its unique optical, physical, and chemical properties. In this study, 2D PdSe2 nanosheets (NSs) are prepared using the liquid-phase exfoliation method. A broadband carrier relaxation dynamics from visible to near-infrared bands are revealed using a time-resolved transient absorption spectrometer, giving results that indicate band filling and bandgap renormalization (BGR) effects in the 2D PdSe2 NSs. The observed blue-shift of the transient absorption spectra at the primary stage and the subsequent red-shift can be ascribed to this BGR effect. These findings reveal the many-body character of the 2D TMDs material and may hold keys for applications in the field of optoelectronics and ultrafast photonics.

Gas-Sensing Mechanisms and Performances of MXenes and MXene-Based Heterostructures

MXenes are a class of 2D transition-metal carbides, nitrides, and carbonitrides with exceptional properties, including substantial electrical and thermal conductivities, outstanding mechanical strength, and a considerable surface area, rendering them an appealing choice for gas sensors. This manuscript provides a comprehensive analysis of heterostructures based on MXenes employed in gas-sensing applications and focuses on addressing the limited understanding of the sensor mechanisms of MXene-based heterostructures while highlighting their potential to enhance gas-sensing performance. The manuscript begins with a broad overview of gas-sensing mechanisms in both pristine materials and MXene-based heterostructures. Subsequently, it explores various features of MXene-based heterostructures, including their composites with other materials and their prospects for gas-sensing applications. Additionally, the manuscript evaluates different engineering strategies for MXenes and compares their advantages to other materials while discussing the limitations of current state-of-the-art sensors. Ultimately, this review seeks to foster collaboration and knowledge exchange within the field, facilitating the development of high-performance gas sensors based on MXenes.

Bifunctional Single Atom Catalysts for Rechargeable Zinc-Air Batteries: From Dynamic Mechanism to Rational Design

Ever-growing demands for rechargeable zinc-air batteries (ZABs) call for efficient bifunctional electrocatalysts. Among various electrocatalysts, single atom catalysts (SACs) have received increasing attention due to the merits of high atom utilization, structural tunability, and remarkable activity. Rational design of bifunctional SACs relies heavily on an in-depth understanding of reaction mechanisms, especially dynamic evolution under electrochemical conditions. This requires a systematic study in dynamic mechanisms to replace current trial and error modes. Herein, fundamental understanding of dynamic oxygen reduction reaction and oxygen evolution reaction mechanisms for SACs is first presented combining in situ and/or operando characterizations and theoretical calculations. By highlighting structure-performance relationships, rational regulation strategies are particularly proposed to facilitate the design of efficient bifunctional SACs. Furthermore, future perspectives and challenges are discussed. This review provides a thorough understanding of dynamic mechanisms and regulation strategies for bifunctional SACs, which are expected to pave the avenue for exploring optimum single atom bifunctional oxygen catalysts and effective ZABs.

MXene Fibers for Flexible and Wearable Electronics: Recent Progress and Future Perspectives

With the impetus of flexible electronics and micro-nano fabrication technology, the human demand for flexible intelligent wearable devices is on an upsurge. In recent years, new functional fibers have undergone rapid development and emerged as an indispensable carrier of flexible wearable e-textiles. However, to achieve their functional applications and durability, new functional fibers must possess good electrical and mechanical properties. As an emerging two-dimensional material, MXenes have attracted immense attention for their high electrical conductivity, mechanical strength, specific surface area, adjustable surface properties, and exceptional processability. As such, MXenes have become an ideal candidate for the primary functional component of functional fibers. This paper presents a comprehensive review of research progress on MXene-based fibers in the construction of flexible wearable electronic textiles. Firstly, we briefly outline the preparation methods of MXenes materials. Next, we summarize the processing types of MXene-based fibers and highlight their performance parameters. Lastly, we summarize the primary application scenarios of MXene-based fibers and anticipate the future development of flexible wearable e-textiles.

Development of a Fluorescent Immunochromatographic Assay Based on Quantum Dot-Functionalized Two-Dimensional Monolayer Ti3C2 MXene Nanoprobes for the Simultaneous Detection of Influenza A Virus and SARS-CoV-2

Accurate and rapid detection of the influenza A virus (FluA) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can effectively control their spread. We developed a colorimetric and fluorescent dual-functional two-channel immunochromatographic assay (ICA) biosensor to simultaneously detect the above-mentioned viruses. A unique two-dimensional Ti3C2-QD immunoprobe was established by adsorbing dense quantum dots (QDs) onto the light green monostromatic Ti3C2 MXene surface, resulting in light green colorimetric and superior fluorescence signals and guaranteeing high sensitivity, stability, and excellent liquidity for ICA detection. Rapid visual screening for FluA and SARS-CoV-2 infections was applicable via a green colorimetric signal. Sensitive and quantitative detection of viruses in their early stages of infection was performed by using the fluorescence signal. Our proposed Ti3C2-QD-ICA biosensor can simultaneously detect 1 ng/mL or 2.4 pg/mL FluA and 1 ng/mL or 6.2 pg/mL SARS-CoV-2 via its colorimetric or fluorescence signals, respectively, with a short testing time (20 min), good reproducibility, specificity, and accuracy. In addition, this method demonstrated sensitivity higher than that of the conventional AuNP-based ICA method in throat swab samples. Hence, our proposed Ti3C2-QD-ICA method can be potentially applied for the rapid, ultrasensitive, and multiplex detection of respiratory viruses.

Two-Dimensional MXenes Derived from Medium/High-Entropy MAX Phases M2 GaC (M = Ti/V/Nb/Ta/Mo) and their Electrochemical Performance

Two-dimensional (2D) transition metal carbides and/or nitrides, MXenes, are prepared by selective etching of the A-site atomically thin metal layers from their MAX phase precursors. High entropy MXenes, the most recent subfamily of MXenes, are in their infancy and have attracted great interest recently. They are currently synthesized mainly through wet chemical etching of Al-containing MAX phases, while various MAX phases with A-sites elements other than Al have not been explored. It is important to embody non-Al MAX phases as precursors for the high entropy MXenes synthesis to allow for new compositions. In this work, it is reported on the design and synthesis of Ga-containing medium/high entropy MAX phases and then their corresponding medium/high entropy MXenes. Gallium atomic layer etching is carried out using a Lewis acid molten salt (CuCl2). The as-prepared (Ti1/4 V1/4 Nb1/4 Ta1/4 )2 CTx exhibits a Li+ specific capacity of ≈400 mAh g-1 . For (Ti1/5 V1/5 Nb1/5 Ta1/5 Mo1/5 )2 CTx a specific capacity of 302 mAh g-1 is achieved after 300 cycles, and high cycling stability is observed at high current densities. This work is of great significance for expanding the family members of MXenes with tunable chemistries and structures.

Precise electronic structure modulation on MXene-based single atom catalysts for high-performance electrocatalytic CO2 reduction reaction: A first-principle study

Electrocatalytic CO₂ reduction reaction (CO₂RR) to CO is a logical approach to achieve a carbon-neutral cycle. In this work, a series of Ti₂CO₂ and O vacancy containing Ti₂CO₂ MXene-based transition metal (TM) single atom catalysts (SACs), including TM-Ti₂CO₂ and TM-O_v-Ti₂CO₂, are explored for high-performance CO₂RR. Sc/Ti/V/Cr-Ti₂CO₂ and Ni-O_v-Ti₂CO₂ are screened out with limiting potential (U_L) more positive than -0.50 V. Ni-O_v-Ti₂CO₂ is a candidate catalyst for CO₂RR to CO, considering its activity with U_L of -0.27 eV, and the selectivity relevant to hydrogen evolution reaction and HCOOH production. Meanwhile, a novel activity descriptor of TM-Ti-O group valence state is proposed according to that TMs work in synergy with coordinated Ti and O atoms and a level of around 0.64 e^- benefits to CO₂RR. This work highlights oxygen vacancy containing Ti₂CO₂-based Ni SAC as a promising catalyst for CO₂RR, and provides a feasible electronic structure design principle for guiding the design of MXene-based SACs for CO₂RR.

Collective photothermal bending of flexible organic crystals modified with MXene-polymer multilayers as optical waveguide arrays

The performance of any engineering material is naturally limited by its structure, and while each material suffers from one or multiple shortcomings when considered for a particular application, these can be potentially circumvented by hybridization with other materials. By combining organic crystals with MXenes as thermal absorbers and charged polymers as adhesive counter-ionic components, we propose a simple access to flexible hybrid organic crystal materials that have the ability to mechanically respond to infrared light. The ensuing hybrid organic crystals are durable, respond fast, and can be cycled between straight and deformed state repeatedly without fatigue. The point of flexure and the curvature of the crystals can be precisely controlled by modulating the position, duration, and power of thermal excitation, and this control can be extended from individual hybrid crystals to motion of ordered two-dimensional arrays of such crystals. We also demonstrate that excitation can be achieved over very long distances (>3 m). The ability to control the shape with infrared light adds to the versatility in the anticipated applications of organic crystals, most immediately in their application as thermally controllable flexible optical waveguides for signal transmission in flexible organic electronics.

Lithium storage performance enhanced by lithiation-induced structural phase transitions of fluorinated MXenes

Structural phase transitions in electrode materials of Li-ion batteries (LIBs) often occur along with Li-ion extraction/intercalation during charge and discharge processes. Lithiation-induced phase transition behaviors of two-dimensional fluorinated MXenes were investigated systematically by first-principles density functional calculations. The calculated results show that fluorine atoms in the nine MXenes studied moved from the FCC site (or HCP site for Ta₂CF₂) to the TOP site during Li adsorption. Further all the predicted phase transitions were confirmed by ab initio molecular dynamic simulations. The band structure, density of state, diffusion energy barrier, average voltage and storage capacity were calculated to evaluate the lithium storage properties of fluorinated MXenes, which revealed that V₂CF₂ and Ti₂CF₂ are the optimal candidates for LIB electrode materials. The structural phase transition led to improvements in the cycle stability, storage capacity, average voltage, and other lithium storage properties of the fluorinated MXenes.

Colorimetric method transforms into highly sensitive homogeneous voltammetric sensing strategy for mercury ion based on mercury-stimulated Ti3C2Tx MXene nanoribbons@gold nanozyme activity

Nanozymes were emerged as the next generation of enzyme-mimics which exhibit great applications in various fields, but there is rarely report in the electrochemical detection of heavy metal ions. In this work, Ti₃C₂T_x MXene nanoribbons@gold (Ti₃C₂T_x MNR@Au) nanohybrid was prepared firstly via a simple self-reduction process and its nanozyme activity was studied. The results showed the peroxidase-like activity of bare Ti₃C₂T_x MNR@Au is extremely weak, while in the presence of Hg²⁺, the related nanozyme activity is stimulated and improved remarkably, which can easily catalyze oxidation of several colorless substrates (e.g., o-phenylenediamine) to form colored products. Interestingly, the product of o-phenylenediamine exhibits a strong reduction current which is considerably sensitive to the Hg²⁺ concentration. Based on this phenomenon, an innovative and highly sensitive homogeneous voltammetric (HVC) sensing strategy was then proposed to detect Hg²⁺ via transforming the colorimetric method into electrochemistry since it can exhibit several unique advantages (e.g., rapid responsiveness, high sensitivity and quantificational). Compared to the conventional electrochemical sensing methods for Hg²⁺, the designed HVC strategy can avoid the modification processes of electrode coupled with enhanced sensing performances. Therefore, we expect the as-proposed nanozyme-based HVC sensing strategy provides a new development direction for detecting Hg²⁺ and other heavy metals.

Toward Smart Sensing by MXene

The Internet of Things era has promoted enormous research on sensors, communications, data fusion, and actuators. Among them, sensors are a prerequisite for acquiring the environmental information for delivering to an artificial data center to make decisions. The MXene-based sensors have aroused tremendous interest because of their extraordinary performances. In this review, the electrical, electronic, and optical properties of MXenes are first introduced. Next, the MXene-based sensors are discussed according to the sensing mechanisms such as electronic, electrochemical, and optical methods. Initially, biosensors are introduced based on chemiresistors and field-effect transistors. Besides, the wearable pressure sensor is demonstrated with piezoresistive devices. Third, the electrochemical methods include amperometry and electrochemiluminescence as examples. In addition, the optical approaches refer to surface plasmonic resonance and fluorescence resonance energy transfer. Moreover, the prospects are delivered of multimodal data fusion toward complicated human-like senses. Eventually, future opportunities for MXene research are conveyed in the new material discovery, structure design, and proof-of-concept devices.

Crafting two-dimensional materials for contrast agents, drug, and heat delivery applications through green technologies

The development of two-dimensional (2D) materials for biomedical applications has accelerated exponentially. Contrary to their bulk counterparts, the exceptional properties of 2D materials make them highly prospective for contrast agents for bioimage, drug, and heat delivery in biomedical treatment. Nevertheless, empty space in the integration and utilisation of 2D materials in living biological systems, potential toxicity, as well as required complicated synthesis and high-cost production limit the real application of 2D materials in those advance medical treatments. On the other hand, green technology appears to be one of strategy to shed a light on the blurred employment of 2D in medical applications, thus, with the increasing reports of green technology that promote advanced technologies, here, we compile, summarise, and synthesise information on the biomedical technology of 2D materials through green technology point of view. Beginning with a fundamental understanding, of crystal structures, the working mechanism, and novel properties, this article examines the recent development of 2D materials. As well as 2D materials made from natural and biogenic resources, a recent development in green-related synthesis was also discussed. The biotechnology and biomedical-related application constraints are also discussed. The challenges, solutions, and prospects of the so-called green 2D materials are outlined.

How About Vanadium-Based Compounds as Cathode Materials for Aqueous Zinc Ion Batteries?

Aqueous zinc-ion batteries (AZIBs) stand out among many monovalent/multivalent metal-ion batteries as promising new energy storage devices because of their good safety, low cost, and environmental friendliness. Nevertheless, there are still many great challenges to exploring new-type cathode materials that are suitable for Zn2+ intercalation. Vanadium-based compounds with various structures, large layer spacing, and different oxidation states are considered suitable cathode candidates for AZIBs. Herein, the research advances in vanadium-based compounds in recent years are systematically reviewed. The preparation methods, crystal structures, electrochemical performances, and energy storage mechanisms of vanadium-based compounds (e.g., vanadium phosphates, vanadium oxides, vanadates, vanadium sulfides, and vanadium nitrides) are mainly introduced. Finally, the limitations and development prospects of vanadium-based compounds are pointed out. Vanadium-based compounds as cathode materials for AZIBs are hoped to flourish in the coming years and attract more and more researchers' attention.

A systematic computational investigation of lithiation-induced structural phase transitions of O-functionalized MXenes

Along with Li-ion extraction/intercalation during charge and discharge processes, structural phase transitions often occur in the electrode materials of Li-ion batteries (LIBs). By determining atomic positions before and after Li adsorptions, structural phase transitions of two-dimensional MXenes were investigated systematically using first-principles density functional calculations. The lithiation-induced phase transitions of ten M₂C MXenes with oxygen groups can be divided into three types. No phase transitions occur for Ti-type MXenes including Ti₂CO₂, Zr₂CO₂ and Hf₂CO₂. The oxygens in Ta-type MXenes (Sc₂CO₂, Y₂CO₂, Nb₂CO₂ and Ta₂CO₂) move from one type of octahedral void to another type of octahedral void. However, for Mo-type MXenes including V₂CO₂, Cr₂CO₂ and Mo₂CO₂, the oxygens move from octahedral voids to tetrahedral voids. The mechanisms whether phase transitions happen or not are dependent on the sizes of M ions. Furthermore, all the predicted phase transitions were confirmed by ab initio molecular dynamics simulations. The calculated results of electron localization functions and Bader charge illustrate that there exist strong Coulomb interactions (ionic bonds) between Li and MXene surfaces. The band structure, diffusion energy barrier, open circuit voltage and storage capacity were calculated to evaluate the lithium storage properties of different MXenes, which reveals that V₂CO₂ and Cr₂CO₂ should be optimal candidates as electrode materials for LIBs.

Application of MXene-based materials in Fenton-like systems for organic wastewater treatment: A review

Recently, Fenton-like systems have been widely explored and applied for the removal of organic matter from wastewater. Two-dimensional (2D) MXene-based materials exhibit excellent adsorption and catalysis capacity for organic pollutants removal, which has been reported widely. However, there is no summary on the application of MXene-based materials in Fenton-like systems for organic matter removal. In this review, four types of MXene-based materials were introduced, including 2D MXene, MXene/Metal complex, MXene/Metal oxide complex, and MXene/3D carbon material complex. In addition, the Fenton-like system usually consists of adsorption and degradation processes. The oxidation process might contain hydrogen peroxide (H₂O₂) or persulfate (PS) oxidants. This review summarizes the performance and mechanisms of organic pollutants adsorption and oxidants activation by MXene-based materials systematically. Finally, the existing problems and future research directions of MXene-based materials are proposed in Fenton-like wastewater treatment systems.

Application of Titanium Carbide MXenes in Chemiresistive Gas Sensors

The titanium carbide MXenes currently attract an extreme amount of interest from the material science community due to their promising functional properties arising from the two-dimensionality of these layered structures. In particular, the interaction between MXene and gaseous molecules, even at the physisorption level, yields a substantial shift in electrical parameters, which makes it possible to design gas sensors working at RT as a prerequisite to low-powered detection units. Herein, we consider to review such sensors, primarily based on Ti3C2Tx and Ti2CTx crystals as the most studied ones to date, delivering a chemiresistive type of signal. We analyze the ways reported in the literature to modify these 2D nanomaterials for (i) detecting various analyte gases, (ii) improving stability and sensitivity, (iii) reducing response/recovery times, and (iv) advancing a sensitivity to atmospheric humidity. The most powerful approach based on designing hetero-layers of MXenes with other crystals is discussed with regard to employing semiconductor metal oxides and chalcogenides, noble metal nanoparticles, carbon materials (graphene and nanotubes), and polymeric components. The current concepts on the detection mechanisms of MXenes and their hetero-composites are considered, and the background reasons for improving gas-sensing functionality in the hetero-composite when compared with pristine MXenes are classified. We formulate state-of-the-art advances and challenges in the field while proposing some possible solutions, in particular via employing a multisensor array paradigm.

Chalcogen (S, Se, and Te) decorated few-layered Ti3C2Tx MXene hybrids: modulation of properties through covalent bonding

2D carbides and nitrides of transition metals (MXenes) have shown great promise in a variety of energy storage and energy conversion applications. The extraordinary properties of MXenes are because of their excellent conductivity, large carrier concentration, vast specific surface area, superior hydrophilicity, high volumetric capacitance, and rich surface chemistry. However, it is still desired to synthesize MXenes with specific functional groups that deliver the required characteristics. This is due to the fact that a considerable amount of metal atoms is exposed on the surface of MXenes during their synthesis through an etching procedure; hence, other anions and cations are uncontrollably implanted on their surfaces. Because of this situation, the first invented Ti₃C₂T_x MXene suffers from low photoresponsivity and detectivity, large overpotential, and small sensitivity in photoelectrochemical (PEC) photodetectors, hydrogen evolution reaction (HER), and sensing applications. Therefore, surface modification of the MXene structure is required to develop the device's performance. On the other hand, there is still a lack of understanding of the MXene mechanism in such cutting-edge applications. Thus, the manipulations of MXenes are highly dependent on understanding the device mechanism, suitable modification elements, and modification methods. This study for the first time reveals the conjugation effect of pre-selected S, Se, and Te chalcogen elements on a few-layered Ti₃C₂T_x MXene to synthesize new composites for PEC photodetector, HER, and vapor sensor applications. Also, the mechanism of the chalcogen decorated few-layered Ti₃C₂T_x MXene composites for each application is discussed. The selection of a few-layered Ti₃C₂T_x MXene is due to its fascinating characteristics which make it capable to be considered as an appropriate substrate and incorporating chalcogen atoms. The Te-decorated few-layered Ti₃C₂T_x MXene composite provides better performances in PEC photodetector and vapor sensing applications. Although the potential value of the Se-decorated few-layered Ti₃C₂T_x composite is slightly lower than that of the Te-decorated sample in HER application, its overpotential is still greater than that of the Te-decorated sample. The acquired results show that the S-decorated few-layered Ti₃C₂T_x composite demonstrates the lowest performance in all three examined applications in comparison with the other two samples.

X-ray Insights into Formation of -O Functional Groups on MXenes: Two-Step Dehydrogenation of Adsorbed Water

Engineered MXene surfaces with more -O functional groups are feasible for realizing higher energy density due to their higher theoretical capacitance. However, there have been only a few explorations of this regulation mechanism. Investigating the formation source and mechanism is conducive to expanding the adjustment method from the top-down perspective. Herein, for the first time, the formation dynamics of -O functional groups on Mo₂CT_x are discovered as a two-step dehydrogenation of adsorbed water through in situ near-ambient-pressure X-ray photoelectron spectroscopy, further confirmed by ab initio molecular dynamics simulations. From this, the controllable substitution of -F functional groups with -O functional groups is achieved on Mo₂CT_x during electrochemical cycling in an aqueous electrolyte. The obtained Mo₂CT_x with rich -O groups exhibits a high capacitance of 163.2 F g ^-1 at 50 mV s ^-1, together with excellent stability. These results offer new insights toward engineering surface functional groups of MXenes for many specific applications.

Roles of MXene in Pressure Sensing: Preparation, Composite Structure Design, and Mechanism

Flexible pressure sensors are one of the most important components in the fields of electronic skin (e-skin), robotics, and health monitoring. However, the application of pressure sensors in practice is still difficult and expensive due to the limited sensing properties and complex manufacturing process. The emergence of MXene, a red-hot member of the 2D nanomaterials, has brought a brand-new breakthrough for pressure sensing. Ti₃ C₂ T_x is the most popular studied MXene in the field of pressure sensing and shows good mechanical, electrical properties, excellent hydrophilicity, and extensive modifiability. It will ameliorate the properties of the sensitive layer and electrode layer of the pressure sensor, and further apply pressure sensing to many fields, such as e-skin flexibility. Herein, the preparation technologies, antioxidant methods, and properties of MXene are summarized. The design of MXene-based microstructures is introduced, including hydrogels, aerogels, foam, fabrics, and composite nanofibers. The mechanisms of MXene pressure sensors are further broached, including piezoresistive, capacitive, piezoelectric, triboelectric, and potentiometric transduction mechanism. Moreover, the integration of multiple devices is reviewed. Finally, the chance and challenge of pressure sensors improved by MXene smart materials in future e-skin and the Internet of Things are prospected.

Advances in Novel Nanomaterial-Based Optical Fiber Biosensors-A Review

This article presents a concise summary of current advancements in novel nanomaterial-based optical fiber biosensors. The beneficial optical and biological properties of nanomaterials, such as nanoparticle size-dependent signal amplification, plasmon resonance, and charge-transfer capabilities, are widely used in biosensing applications. Due to the biocompatibility and bioreceptor combination, the nanomaterials enhance the sensitivity, limit of detection, specificity, and response time of sensing probes, as well as the signal-to-noise ratio of fiber optic biosensing platforms. This has established a practical method for improving the performance of fiber optic biosensors. With the aforementioned outstanding nanomaterial properties, the development of fiber optic biosensors has been efficiently promoted. This paper reviews the application of numerous novel nanomaterials in the field of optical fiber biosensing and provides a brief explanation of the fiber sensing mechanism.

Tunable Structured MXenes With Modulated Atomic Environments: A Powerful New Platform for Electrocatalytic Energy Conversion

Owing to their rich surface chemistry, high conductivity, tunable bandgap, and thermal stability, structured 2D transition-metal carbides, nitrides, and carbonitrides (MXenes) with modulated atomic environments have emerged as efficient electrochemical energy conversion systems in the past decade. Herein, the most recent advances in the engineering of tunable structured MXenes as a powerful new platform for electrocatalytic energy conversion are comprehensively summarized. First, the state-of-the-art synthetic and processing methods, tunable nanostructures, electronic properties, and modulation principles of engineering MXene-derived nanoarchitectures are focused on. The current breakthroughs in the design of catalytic centers, atomic environments, and the corresponding structure-performance correlations, including termination engineering, heteroatom doping, defect engineering, heterojunctions, and alloying, are discussed. Furthermore, representative electrocatalytic applications of structured MXenes in energy conversion systems are also summarized. Finally, the challenges in and prospects for constructing MXene-based electrocatalytic materials are also discussed. This review provides a leading-edge understanding of the engineering of various MXene-based electrocatalysts and offers theoretical and experimental guidance for prospective studies, thereby promoting the practical applications of tunable structured MXenes in electrocatalytic energy conversion systems.

Mixed-dimensional V2CTx/Ti3C2Tx composite interlayer to boost electrochemical performance of Li-S batteries

Abstract: A mixed-dimensional V₂CT_x/Ti₃C₂T_x composite interlayer was successfully prepared to tackle severe polysulfide (LiPS) shuttling and sluggish sulfur redox kinetics for high-performance lithium–sulfur batteries. In the unique nanoarchitecture, two-dimensional Ti₃C₂T_x nanosheets served as a stable skeleton with superb electronic conductivity, good mechanical strength, and high polysulfide adsorption, whereas one-dimensional V₂CT_x nanorods played a crucial role in chemisorbing LiPSs and catalyzing the conversion of LiPSs due to their high polarity and electrocatalysis. With the synergistic effect of V₂CT_x and Ti₃C₂T_x composite nanostructures, the cells with the mixed-dimensional V₂CT_x/Ti₃C₂T_x composite interlayer showed an impressive long-term cycling stability and small capacity decay rate of 0.062% per cycle over 600 cycles at 1 C and exhibited an outstanding rate capability of 935.3 mAh·g⁻¹ at 2 C.

Nanocomposite hydrogels for biomedical applications

Nanomaterials' unique structures at the nanometer level determine their incredible functions, and based on this, they can be widely used in the field of nanomedicine. However, nanomaterials do possess disadvantages that cannot be ignored, such as burst release, rapid elimination, and poor bioadhesion. Hydrogels are scaffolds with three-dimensional structures, and they exhibit good biocompatibility and drug release capacity. Hydrogels are also associated with disadvantages for biomedical applications such as poor anti-tumor capability, weak bioimaging capability, limited responsiveness, and so on. Incorporating nanomaterials into the 3D hydrogel network through physical or chemical covalent action may be an effective method to avoid their disadvantages. In nanocomposite hydrogel systems, multifunctional nanomaterials often work as the function core, giving the hydrogels a variety of properties (such as photo-thermal conversion, magnetothermal conversion, conductivity, targeting tumor, etc.). While, hydrogels can effectively improve the retention effect of nanomaterials and make the nanoparticles have good plasticity to adapt to various biomedical applications (such as various biosensors). Nanocomposite hydrogel systems have broad application prospects in biomedicine. In this review, we comprehensively summarize and discuss the most recent advances of nanomaterials composite hydrogels in biomedicine, including drug and cell delivery, cancer treatment, tissue regeneration, biosensing, and bioimaging, and we also briefly discussed the current situation of their commoditization in biomedicine.

Efficient degradation of organic pollutants by activated peroxymonosulfate over TiO2@C decorated Mg-Fe layered double oxides: Degradation pathways and mechanism

To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg-Fe layered double oxides decorated with Ti₃C₂ MXene-derived TiO₂@C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg-Fe LDOs/PMS system and Mg-Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1-11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both ^•O₂^- and ¹O₂ were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO₂@C facilitated the electron transfer between ≡Fe^(Ⅲ)‒OH complex and HSO₅^-, boosting the generation of ^•O₂^- and ¹O₂. This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.

Advances and emerging challenges in MXenes and their nanocomposites for biosensing applications

Two-dimensional materials have unique properties and their better functionality has created new paradigms in the field of sensing. Over the past decade, a new family of 2D materials known as MXenes has emerged as a promising material for numerous applications, including biosensing. Their metallic conductivity, rich surface chemistry, hydrophilicity, good biocompatibility, and high anchoring capacity for biomaterials make them an attractive candidate to detect a variety of analytes. Despite such notable properties, there are certain limitations associated with them. This review aims to present a detailed survey of MXene's synthesis; in particular, their superiority in the field of biosensing as compared to other 2D materials is addressed. Their low oxidative stability is still an open challenge, and recent investigations on MXene's oxidation are summarized. The hexagonal stacking network of MXenes acts as a distinctive matrix to load nanoparticles, and the embedded nanoparticles can bind an excess number of biomolecules (e.g., antibodies) thereby improving biosensor performance. We will also discuss the synthesis and corresponding performance of MXenes nanocomposites with noble metal nanoparticles and magnetic nanoparticles. Furthermore, Nb and Ti2C-based MXenes, and Ti3C2-MXene sandwich immunoassays are also reviewed in view of their importance. Different aspects and challenges associated with MXenes (from their synthesis to final applications) and the future perspectives described give new directions to fabricate novel biosensors.

Element-Doped Mxenes: Mechanism, Synthesis, and Applications

Heteroatom doping can endow MXenes with various new or improved electromagnetic, physicochemical, optical, and structural properties. This greatly extends the arsenal of MXenes materials and their potential for a spectrum of applications. This article comprehensively and critically discusses the syntheses, properties, and emerging applications of the growing family of heteroatom-doped MXenes materials. First, the doping strategies, synthesis methods, and theoretical simulations of high-performance MXenes materials are summarized. In order to achieve high-performance MXenes materials, the mechanism of atomic element doping from three aspects of lattice optimization, functional substitution, and interface modification is analyzed and summarized, aiming to provide clues for developing new and controllable synthetic routes. The mechanisms underlying their advantageous uses for energy storage, catalysis, sensors, environmental purification and biomedicine are highlighted. Finally, future opportunities and challenges for the study and application of multifunctional high-performance MXenes are presented. This work could open up new prospects for the development of high-performance MXenes.

Recent Advances of MXene-Based Electrochemical Immunosensors

Electrochemical immunosensors are the largest class of affinity biosensing devices with strong practicability. In recent years, MXenes have become hotspot materials of electrochemical biosensors for their excellent properties, including large specific surface area, good electrical conductivity, high hydrophilicity and rich functional groups. In this review, we firstly introduce the composition and structure of MXenes, as well as their properties relevant to the construction of biosensors. Then, we summarize the recent advances of MXenes-based electrochemical immunosensors, focusing on the roles of MXenes in various electrochemical immunosensors. Finally, we analyze current problems of MXenes-based electrochemical immunosensors and propose an outlook for this research field.

An Assessment of MXenes through Scanning Probe Microscopy

Recently, exploring the unique properties of 2D materials has constituted a new wave of research, which lead these materials to enormous applications ranging from optoelectronics to healthcare systems. Due to the profusion of surface terminated functionalities, MXenes have become an emerging class of 2D materials that can be easily integrated with other materials. The versatility of MXenes allows to tune their finest material properties for further device applications. This review initiates with the classification of preparation methods of MXenes, where the authors elaborate on the significance of top-down approaches including the exfoliation of solid layers. Next, the focus is diverted toward the materials analysis of MXenes including their terminations analysis as well as their intriguing electrical and mechanical behaviors through scanning probe microscopy. Finally, critical challenges and perspectives for MXenes analysis and applications are explored and discussed. Therefore, this comprehensive review can encourage researchers, and offer a precise direction to employ MXenes in various applications.

Roles of Metal Ions in MXene Synthesis, Processing and Applications: A Perspective

With a decade of effort, significant progress has been achieved in the synthesis, processing, and applications of MXenes. Metal ions play many crucial roles, such as in MXene delamination, structure regulation, surface modification, MXene composite construction, and even some unique applications. The different roles of metal ions are attributed to their many interactions with MXenes and the unique nature of MXenes, including their layered structure, surface chemistry, and the existence of multi-valent transition metals. Interactions with metal ions are crucial for the energy storage of MXene electrodes, especially in metal ion batteries and supercapacitors with neutral electrolytes. This review aims to provide a good understanding of the interactions between metal ions and MXenes, including the classification and fundamental chemistry of their interactions, in order to achieve their more effective utilization and rational design. It also provides new perspectives on MXene evolution and exfoliation, which may suggest optimized synthesis strategies. In this respect, the different effects of metal ions on MXene synthesis and processing are clarified, and the corresponding mechanisms are elaborated. Research progress on the roles metal ions have in MXene applications is also introduced.

Recent Advances in Oxidation Stable Chemistry of 2D MXenes

As an emerging star of 2D nanomaterials, 2D transition metal carbides and nitrides, named MXenes, present a large potential in various research areas owing to their intrinsic multilayer structure and intriguing physico-chemical properties. However, the fabrication and application of functional MXene-based devices still remain challenging as they are prone to oxidative degradation under ambient environment. Within this review, the preparation methods of MXenes focusing on the recent investigations on their thermal structure-stability relationships in inert, oxidizing, and aqueous environments are systematically introduced. Moreover, the key factors that affect the oxidation of MXenes, such as, atmosphere, temperature, composition, microstructure, and aqueous environment, are reviewed. Based on different scenarios, strategies for avoiding or delaying the oxidation of MXenes are proposed to encourage the utilization of MXenes in complicated environments, especially at high temperature. Furthermore, the chemistry of MXene-derived oxides is analyzed, which can offer perspectives on the further design and fabrication of novel 2D composites with the unique structures of MXenes being preserved.