Polymeric Graphitic Carbon Nitride as a Heterogeneous Organocatalyst: From Photochemistry to Multipurpose Catalysis to Sustainable Chemistry

A comparison increasing the photodegradation power of a Ag/g-C3N4 /CoNi-LDH nanocomposite: Photocatalytic activity toward water treatment

For environmental applications, it is crucial to rationally design and synthesize photocatalysts with positive exciton splitting and interfacial charge transfer. Here, a novel Ag-bridged dual Z-scheme Ag/g-C3N4/CoNi-LDH plasmonic heterojunction was successfully synthesized using a simple method, with the goal of overcoming the common drawbacks of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers, and unstable structure. These materials were characterized by XRD, FT-IR, SEM, TEM UV-Vis/DRS, and XPS to verify the structure and stability of the heterostructure. The pristine LDH, g-C3N4, and Ag/g-C3N4/CoNi-LDH composite were investigated as photocatalysts for water remediation, an environmentally motivated process. Specifically, the photocatalytic degradation of tetracycline was studied as a model reaction. The performance of the supports and composite catalyst were determined by evaluating both the degradation and adsorption phenomenon. The influence of several experimental parameters such as catalyst loading, pH, and tetracycline concentration were evaluated. The current study provides important data for water treatment and similar environmental protection applications.

Photorefinery of Biomass and Plastics to Renewable Chemicals using Heterogeneous Catalysts

The photocatalytic conversion of biomass and plastic waste provides opportunities for sustainable fuel and chemical production. Heterogeneous photocatalysts, typically composed of semiconductors with distinctive redox properties in their conduction band (CB) and valence band (VB), facilitate both the oxidative and reductive valorization of organic feedstocks. This article provides a comprehensive overview of recent advancements in the photorefinery of biomass and plastics from the perspective of the redox properties of photocatalysts. We explore the roles of the VB and CB in enhancing the value-added conversion of biomass and plastics via various pathways. Our aim is to bridge the gap between photocatalytic mechanisms and renewable carbon feedstock valorization, inspiring further development in photocatalytic refinery of biomass and plastics.

g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Graphitic carbon nitride-based electrochemical sensors: A comprehensive review of their synthesis, characterization, and applications

Graphitic carbon nitride (g-C3N4) has garnered much attention as a promising 2D material in the realm of electrochemical sensors. It contains a polymeric matrix that can serve as an economical and non-toxic electrode material for the detection of a diverse range of analytes. However, its performance is impeded by a relatively limited active surface area and inherent instability. Although electrochemistry involving metal-doped g-C3N4 nanomaterials is rapidly progressing, it remains relatively unexplored. The metal doping of g-C3N4 augments the electrochemically active surface area of the resulting electrode, which has the potential to significantly enhance electrode kinetics and bolster catalytic activity. Consequentially, the main objective of this review is to provide insight into the intricacies of synthesizing and characterizing metal-doped g-C3N4. Furthermore, we comprehensively delve into the fundamental attributes of electrochemical sensors based on metal-doped g-C3N4, with a specific focus on healthcare and environmental applications. These applications encompass a meticulous exploration of detecting biomolecules, drug molecules, and organic pollutants.

Stable, while Still Active? A DFT Study of Cu, Ag, and Au Single Atoms at the C3N4/TiO2 Interface

Hybrid DFT calculations are employed to compare the adsorption and stabilization of Cu, Ag, and Au atoms on graphitic C3N4 and on the heterojunction formed by g- C3N4 and TiO2. While Cu and Ag can be strongly chemisorbed in form of cations on g- C3N4, Au is only weakly physisorbed. On g- C3N4/TiO2, all coinage metal adatoms can be strongly chemisorbed, but, while Cu and Ag forms cations, Au form an Au- species. Ab Initio Molecular Dynamics simulations confirm that the metal adatoms on g-C3N4 are highly mobile at room temperature, while they remain confined in the interfacial spacing between C3N4 and TiO2 on the heterojunction, being both stably bound and reachable for the reactants in a catalytic cycle. Doping g- C3N4/TiO2 with metal single atoms permits thus to generate catalytic systems with tunable charge and chemical properties and improved stability with respect to bare C3N4. Moreover, the changes in the electronic structure of g- C3N4/TiO2 induced by the presence of the metal single atoms are beneficial also for photocatalytic applications.

Atomistic understanding of enhanced selectivity in photocatalytic oxidation of benzyl alcohol to benzaldehyde using graphitic carbon nitride loaded with single copper atoms

The loading of graphitic carbon nitride (gCN) with transition metals has received significant attention for efficient light-driven catalysis. However, the contribution of the loaded metals to enhanced performance remains unclear. In this study, Cu is loaded onto gCN to understand how photocatalytic activity is regulated by the loaded metals. Loading gCN with 3 wt% of Cu increases the electron population by 8.1 and 4.6 times under UV (λ < 370 nm) and visible light (390 < λ < 740 nm), respectively. This sample shows nearly 100% selectivity for oxidizing benzyl alcohol to benzaldehyde and a high yield-to-power ratio, reaching 0.35 mmol g-1 h-1 W-1. The loaded Cu species exist as single atoms with a +1-oxidation state. Each Cu+ cation is coordinated to two (at 3 wt% Cu) or four (at 6 wt% Cu) N atoms within the cavity of the gCN framework. Doubling the Cu loading results in a smaller electron population and coordinatively more saturated Cu+ cations, making it catalytically less reactive. Ab initio molecular dynamics simulations show that Cu+ cations produce filled mid-gap states above the valence band, which function as hole traps and hence oxidation centers. The Cu+ cation and the neighboring N atoms are electron-depletion and electron-accumulation sites due to Cu → N electron transfer, making it highly reactive for oxidative transformations via the hole transfer pathway. The role of Cu as a hole-transfer site updates the received understanding that surface-loaded Cu serves as an electron-accumulation site. A strong correlation is observed between the electron population at steady-state and the product yield, indicating that it could serve as a promising performance indicator for the design of future photocatalysts.

The Heptazine-Based Materials through Intrinsically Modification for the Cycloaddition of CO2 and Bisepoxides

For the efficient utilization of CO2 into valuable product, the attractive carbon nitride catalysts have been widely studied. In this work, heptazine-related materials with varying degree of polymerization were designed by an intrinsically modification strategy and employed in the cycloaddition of CO2 with the bisepoxide 1, 4-butanediol diglycidyl ether (BDODGE). We initially figured out that the sample prepared at 450 °C contained more melem hydrate, exhibiting the best performance. The epoxides conversion and corresponding cyclic carbonates selectivity could achieve 93.1 % and 99.3 % at 140 °C for 20 h without any cocatalyst and solvent, respectively. Results of the catalytic tests suggested that the high catalytic activity was dependent on big size porous structure and the synergetic effect of active amino groups and -OH groups. The role of water in maintaining the specific structure and providing active site has been proved. Moreover, the CN-450-W catalyst exhibited outstanding recycling stability. And finally, a plausible reaction mechanism was proposed.

A robust Fe-based heterogeneous photocatalyst for the visible-light-mediated selective reduction of an impure CO2 stream

The transformation of CO2 into value-added products from an impure CO2 stream, such as flue gas or exhaust gas, directly contributes to the principle of carbon capture and utilization (CCU). Thus, we have developed a robust iron-based heterogeneous photocatalyst that can convert the exhaust gas from the car into CO with an exceptional production rate of 145 μmol g-1 h-1. We characterized this photocatalyst by PXRD, XPS, ssNMR, EXAFS, XANES, HR-TEM, and further provided mechanistic experiments, and multi-scale/level computational studies. We have reached a clear understanding of its properties and performance that indicates that this highly robust photocatalyst could be used to design an efficient visible-light-mediated reduction strategy for the transformation of impure CO2 streams into value-added products.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

Boron dopant- and nitrogen defect-decorated C3N5 porous nanostructure as an efficient sulfur host for lithium-sulfur batteries

Active site implantation and morphology manipulation are efficient protocols for boosting the electrochemical performance of carbon nitrides. As a promising sulfur host for lithium-sulfur batteries (LSBs), in this study, C3N5 porous nanostructure incorporated with both boron (B) atoms and nitrogen (N) defects was constructed (denoted as ND-B-C3N5) using a two-step strategy, i.e., pyrolysis of the mixture of 3-amino-1,2, 4-triazole and boric acid to obtain B-doped C3N5 porous nanostructure and then KOH etching under hydrothermal condition to generate N defects. The doped B atoms in the C3N5 porous nanostructure are in the form of B-N bonds and grafted B-O bonds. N defects are primarily created at the CN-C positions of the triazine unit, leaving behind some N vacancies and cyano groups. Benefiting from the involvement of B dopants and N defects, the optimized ND-B-C3N5-12 sample exhibits ameliorative conductivity, mass transport, lithium polysulfides (LiPSs) adsorption ability, diffusion of Li+ ions, Li2S deposition capacity, sulfur redox polarization, and a reversible solid-solid sulfur redox process. Consequently, the ND-B-C3N5-12/S cathode delivers accelerated redox performance of polysulfides for LSBs, revealing capacities of 1091 ± 44 and 753 ± 20 mAh/g at 0.2C for the initial and 300th cycles, respectively. The ND-B-C3N5-12/S cathode is also endowed with desired sulfur redox activity and stability at 2C for 1000 cycles, holding an initial discharging capacity of 788 ± 24 mAh/g and a low decay rate of 0.05 % per cycle.

Designing a photocatalytic and self-renewed g-C3N4 nanosheet/poly-Schiff base composite coating towards long-term biofouling resistance

Inhibiting the adhesion and growth of marine microorganisms through photocatalysis is a potentially efficient and environmentally friendly antifouling strategy. However, the undesired "shading effect" caused by resin coatings and microbial deposition reduces the utilization of the catalysts and leads to a failure in the antifouling active substance on the coating surface. Here, we successfully developed a composite coating (DPC-x) combining g-C3N4 nanosheet (g-C-NS) photocatalysts with degradable green poly-Schiff base resins, which integrates the dual functions of enhanced dynamic self-renewal and photocatalytic antibacterial activities towards long-term anti-biofouling. The controllable and complete degradability of the poly-Schiff base polymer chains and the self-renewal mechanism of the DPC-x coating exposed the internal g-C-NS, which provided a constant stream of photocatalytic reactive interfaces for 100% utilization and release of the photocatalysts. g-C-NS were homogeneously dispersed in the degradable resin coating, significantly enhancing and adjusting the self-renewal rate of the poly-Schiff base resin coating in visible light. The degradation reaction rate of DPC-0.2 (20 wt% g-C-NS) was 40 times that of DPC, thus improving the capabilities of surface self-renewal and fouling-release. Due to the synergistic antifouling mechanism of the efficient antibacterial properties and the enhanced degradation/self-renewal, the antimicrobial rates of DPC and DPC-0.2 were 94.58% and 99.31% in the dark, and 98.2% and 99.87% in visible light. DPC-x has excellent all-weather antimicrobial efficacy and could offer a new perspective on eco-friendly marine antifouling strategies.

Designing Organic Spin-Gapless Semiconductors via Molecular Adsorption on C4N3 Monolayer

Spin-gapless semiconductor (SGS), a class of zero-gap materials with fully spin-polarized electrons and holes, offers significant potential for high-speed, low-energy consumption applications in spintronics, electronics, and optoelectronics. Our first-principles calculations revealed that the Pca21 C4N3 monolayer exhibits a ferromagnetic ground state. Its band structure displays SGS-like characteristics, with the energy gap between the valence and conduction bands near the Fermi level in the spin-down channel much smaller than the one in the other spin channel. To enhance its SGS properties, we introduced electrons into the Pca21 C4N3 monolayer by adsorbing the CO gas molecule on its surface. Stable gas adsorption (CO@C4N3) effectively narrowed the band gap in the spin-down channel without changing the band gap in the spin-up channel obviously. Moreover, injecting holes into the CO@C4N3 system could increase the net magnetic moments and induce an SGS-to-metallic phase transition, while injecting electrons into the CO@C4N3 system is able to lower the net magnetic moments and cause an SGS-to-half-metallic phase transition. Our findings not only underscore a new promising material for practical metal-free spintronics applications but also illustrate a viable pathway for designing SGSs.

Photocatalytic systems: reactions, mechanism, and applications

The photocatalytic field revolves around the utilization of photon energy to initiate various chemical reactions using non-adsorbing substrates, through processes such as single electron transfer, energy transfer, or atom transfer. The efficiency of this field depends on the capacity of a light-absorbing metal complex, organic molecule, or substance (commonly referred to as photocatalysts or PCs) to execute these processes. Photoredox techniques utilize photocatalysts, which possess the essential characteristic of functioning as both an oxidizing and a reducing agent upon activation. In addition, it is commonly observed that photocatalysts exhibit optimal performance when irradiated with low-energy light sources, while still retaining their catalytic activity under ambient temperatures. The implementation of photoredox catalysis has resuscitated an array of synthesis realms, including but not limited to radical chemistry and photochemistry, ultimately affording prospects for the development of the reactions. Also, photoredox catalysis is utilized to resolve numerous challenges encountered in medicinal chemistry, as well as natural product synthesis. Moreover, its applications extend across diverse domains encompassing organic chemistry and catalysis. The significance of photoredox catalysts is rooted in their utilization across various fields, including biomedicine, environmental pollution management, and water purification. Of course, recently, research has evaluated photocatalysts in terms of cost, recyclability, and pollution of some photocatalysts and dyes from an environmental point of view. According to these new studies, there is a need for critical studies and reviews on photocatalysts and photocatalytic processes to provide a solution to reduce these limitations. As a future perspective for research on photocatalysts, it is necessary to put the goals of researchers on studies to overcome the limitations of the application and efficiency of photocatalysts to promote their use on a large scale for the development of industrial activities. Given the significant implications of the subject matter, this review seeks to delve into the fundamental tenets of the photocatalyst domain and its associated practical use cases. This review endeavors to demonstrate the prospective of a powerful tool known as photochemical catalysis and elucidate its underlying tenets. Additionally, another goal of this review is to expound upon the various applications of photocatalysts.

Modification of Visible-Light-Responsive Pb2Ti2O5.4F1.2 with Metal Oxide Cocatalysts to Improve Photocatalytic O2 Evolution toward Z-Scheme Overall Water Splitting

The development of a highly active photocatalyst for visible-light water splitting requires a high-quality semiconductor material and a cocatalyst, which promote both the migration of photogenerated charge carriers and surface redox reactions. In this work, a cocatalyst was loaded onto an oxyfluoride photocatalyst, Pb2Ti2O5.4F1.2, to improve the water oxidation activity. Among the metal oxides examined as cocatalysts, RuO2 was found to be the most suitable, and the O2 evolution activity depended on the preparation conditions for Ru/Pb2Ti2O5.4F1.2. The highest activity was obtained with RuCl3-impregnated Pb2Ti2O5.4F1.2 heated under a flow of H2 at 523 K. The H2-treated Ru/Pb2Ti2O5.4F1.2 showed an O2 evolution rate an order of magnitude higher than those for the analogues without the H2 treatment (e. g., RuO2/Pb2Ti2O5.4F1.2). Physicochemical analyses by X-ray absorption fine-structure spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and time-resolved microwave conductivity measurements indicated that the optimized photocatalyst contained partially reduced RuO2 species with a particle size of ~5 nm. These partially reduced species effectively trapped the photogenerated charge carriers and promoted the oxidation of water into O2. The optimized Ru/Pb2Ti2O5.4F1.2 could function as an O2-evolving photocatalyst in Z-scheme overall water splitting, in combination with an Ru-loaded, Rh-doped SrTiO3 photocatalyst.

Mechanism of directed activation of peroxymonosulfate by Fe-N/O unsymmetrical coordination-modulated polarized electric field

Iron-nitrogen co-doped carbon materials as heterogeneous catalysts have attracted much attention in advanced oxidation processes involving peroxymonosulfate (PMS) due to their unique structure and enormous catalytic potential. However, there is limited research on the influence of different coordination structures on the central iron atoms. Through simple pyrolysis, we introduced oxygen atoms into the Fe-N coordination structure, constructing Fe-N/O@C catalysts with Fe-N2O2 coordination structure, and achieved efficient degradation of bisphenol A (BPA). Quenching experiments, electron paramagnetic resonance, and electrochemical analysis indicate that compared to the free radical activation pathway of Fe-N@C, high-valent iron-oxo species (≡Fe(Ⅳ) = O) are the main reactive oxygen species (ROS) in the Fe-N/O@C/PMS system. Meanwhile, we compared the differences in the oxidation states of Fe atoms and electron density in different coordination structures, revealing the formation of high-valent iron-oxo species and the mechanism of interfacial electron transfer. Therefore, this study provides new insights into the design and development of Fe-N co-doped catalysts for resource-efficient and environmentally friendly catalytic oxidation systems.

Rationally construction of 2D & 3D material on h-BN @ SnO2/TiO2 micro-sphere enables for photocatalytic debasement of textile cloth dyes in waste water treatment

Affordable and swiftly available h-BN@SnO2/TiO2 photocatalysts are being developed through an easy hydrothermally approach was used urea as boric acid precursors. With their constructed photo catalysts, the effect of h-BN@SnO2/TiO2 has been investigated under the assessment of Adsorption agents utilizing X-ray diffraction pattern (XRD), Scanning electron microscopy, Energy dispersive spectroscopic analysis (SEM/EDS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM), and Burner Emit Teller (BET) isotherm testing methods, which also indicated that SnO2/TiO2 and h-BN have been tightly bound together. Because turquoise blue (TB) and Methyl orange (MO) fabric dyes can be found in the industrial wastewater being processed, the photo catalytic degradation process happens to be applied. According to the advantageous linkages of h-BN@SnO2/TiO2 photocatalysts, fantastic efficacy in breakdown towards hazardous compounds has been found. For the decomposition of Turquoise blue (TB) and Methyl orange (MO), the h-BN@SnO2/TiO2 catalysts proved the best performance stability (0.0386 min-1 and 1.524min-1) but were significantly 22 times quicker. Optical catalysis has additionally demonstrated extraordinary resilience and durability throughout five reprocessed efforts. On top of that, an approach enabling photocatalytic breakdown of harmful substances upon h-BN@SnO2/TiO2 has been presented.

Impact of quantum size effects to the band gap of catalytic materials: a computational perspective

The evolution of nanotechnology has facilitated the development of catalytic materials with controllable composition and size, reaching the sub-nanometer limit. Nowadays, a viable strategy for tailoring and optimizing the catalytic activity involves controlling the size of the catalyst. This strategy is underpinned by the fact that the properties and reactivity of objects with dimensions on the order of nanometers can differ from those of the corresponding bulk material, due to the emergence of quantum size effects. Quantum size effects have a deep influence on the band gap of semiconducting catalytic materials. Computational studies are valuable for predicting and estimating the impact of quantum size effects. This perspective emphasizes the crucial role of modeling quantum size effects when simulating nanostructured catalytic materials. It provides a comprehensive overview of the fundamental principles governing the physics of quantum confinement in various experimentally observable nanostructures. Furthermore, this work may serve as a tutorial for modeling the electronic gap of simple nanostructures, highlighting that when working at the nanoscale, the finite dimensions of the material lead to an increase of the band gap because of the emergence of quantum confinement. This aspect is sometimes overlooked in computational chemistry studies focused on surfaces and nanostructures.

Performance of Nitrogen-Doped Carbon Nanoparticles Carrying FeNiCu as Bifunctional Electrocatalyst for Rechargeable Zinc-Air Battery

Catalysts for zinc-air batteries (ZABs) must be stable over long-term charging-discharging cycles and exhibit bifunctional catalytic activity. In this study, by doping nitrogen-doped carbon (NC) materials with three metal atoms (Fe, Ni, and Cu), a single-atom-distributed FeNiCu-NC bifunctional catalyst is prepared. The catalyst includes Fe(Ni-doped)-N4 for the oxygen evolution reaction (OER), Fe(Cu-doped)-N4 for the oxygen reduction reaction (ORR), and the NiCu-NC catalytic structure for the oxygen reduction reaction (ORR) in the nitrogen-doped carbon nanoparticles. This single-atom distribution catalyst structure enhances the bifunctional catalytic activity. If a trimetallic single-atom catalyst is designed, it will surpass the typical bimetallic single-atom catcalyst. FeNiCu-NC exhibits outstanding performance as an electrocatalyst, with a half-wave potential (E1/2) of 0.876 V versus RHE, overpotential (Ej = 10) of 253 mV versus RHE at 10 mA cm-2, and a small potential gap (ΔE = 0.61 V). As the anode in a ZAB, FeNiCu-NC can undergo continuous charge-discharged cycles for 575 h without significant attenuation. This study presents a new method for achieving high-performance, low-cost ZABs via trimetallic single-atom doping.

Single-Molecule Discrimination of Saccharides Using Carbon Nitride Nanopores

Structural complexity brings a huge challenge to the analysis of sugar chains. As a single-molecule sensor, nanopores have the potential to provide fingerprint information on saccharides. Traditionally, direct single-molecule saccharide detection with nanopores is hampered by their small size and weak affinity. Here, a carbon nitride nanopore device is developed to discern two types of trisaccharide molecules (LeApN and SLeCpN) with minor structural differences. The resolution of LeApN and SLeCpN in the mixture reaches 0.98, which has never been achieved in solid-state nanopores so far. Monosaccharide (GlcNAcpN) and disaccharide (LacNAcpN) can also be discriminated using this system, indicating that the versatile carbon nitride nanopores possess a monosaccharide-level resolution. This study demonstrates that the carbon nitride nanopores have the potential for conducting structure analysis on single-molecule saccharides.

Light-Mediated Polymerization Catalyzed by Carbon Nanomaterials

Carbon nanomaterials, specifically carbon dots and carbon nitrides, play a crucial role as heterogeneous photoinitiators in both radical and cationic polymerization processes. These recently introduced materials offer promising solutions to the limitations of current homogeneous systems, presenting a novel approach to photopolymerization. This review highlights the preparation and photocatalytic performance of these nanomaterials, emphasizing their application in various polymerization techniques, including photoinduced i) free radical, ii) RAFT, iii) ATRP, and iv) cationic photopolymerization. Additionally, it discusses their potential in addressing contemporary challenges and explores prospects in this field. Moreover, carbon nitrides, in particular, exhibit exceptional oxygen tolerance, underscoring their significance in radical polymerization processes and allowing their applications such as 3D printing, surface modification of coatings, and hydrogel engineering.

Metallosalen modified carbon nitride a versatile and reusable catalyst for environmentally friendly aldehyde oxidation

The development of environmentally friendly catalysts for organic transformations is of great importance in the field of green chemistry. Aldehyde oxidation reactions play a crucial role in various industrial processes, including the synthesis of pharmaceuticals, agrochemicals, and fine chemicals. This paper presents the synthesis and evaluation of a new metallosalen carbon nitride catalyst named Co(salen)@g-C3N4. The catalyst was prepared by doping salicylaldehyde onto carbon nitride, and subsequently, incorporating cobalt through Schiff base chemistry. The Co(salen)@g-C3N4 catalyst was characterized using various spectroscopic techniques including Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Infrared Spectroscopy (IR), and Thermogravimetric Analysis (TGA). Furthermore, after modification with salicylaldehyde, the carbon nitride component of the catalyst exhibited remarkable yields (74-98%) in oxidizing various aldehyde derivatives (20 examples) to benzoic acid. This oxidation reaction was carried out under mild conditions and resulted in short reaction times (120-300 min). Importantly, the catalyst demonstrated recyclability, as it could be reused for five consecutive runs without any loss of activity. The reusable nature of the catalyst, coupled with its excellent yields in oxidation reactions, makes it a promising and sustainable option for future applications.

Vibrational dynamics and spectroscopy of water at porous g-C3N4 and C2N surfaces

Porous graphitic materials containing nitrogen are promising catalysts for photo(electro)chemical reactions, notably water splitting, but can also serve as "molecular sieves". Nitrogen increases the hydrophilicity of the graphite parent material, among other effects. A deeper understanding of how water interacts with C- and N-containing layered materials, if and which differences exist between materials with different N content and pore size, and what the role of water dynamics is - a prerequsite for catalysis and sieving - is largely absent, however. Vibrational spectroscopy can answer some of these questions. In this work, the vibrational dynamics and spectroscopy of deuterated water molecules (D2O) mimicking dense water layers at room temperature on the surfaces of two different C/N-based materials with different N content and pore size, namely graphitic C3N4 (g-C3N4) and C2N, are studied using ab initio molecular dynamics (AIMD). In particular, time-dependent vibrational sum frequency generation (TD-vSFG) spectra of the OD modes and also time-averaged vSFG spectra and OD frequency distributions are computed. This allows us to distinguish "free" (dangling) OD bonds from OD bonds that are bound in a H-bonded water network or at the surface - with subtle differences between the two surfaces and also to a pure water/air interface. It is found that the temporal decay of OD modes is very similar on both surfaces with a correlation time near 4 ps. In contrast, TD-vSFG spectra reveal that the interconversion time from "bonded" to "free" OD bonds is about 8 ps for water on C2N and thus twice as long as for g-C3N4, demonstrating a propensity of the former material to stabilize bonded OD bonds.

Tunable electronic and optical properties of BAs/WTe2heterostructure for theoretical photoelectric device design

The geometric structure of the BAs/WTe2heterojunction was scrutinized by employingab initiocalculations grounded on density functional theory. Multiple configurations are constructed to determine the equilibrium state of the heterojunction with optimal stability. The results show that the H1-type heterojunction with interlayer distance of 3.92 Å exhibits exceptional stability and showcases a conventional Type-II band alignment, accompanied by a direct band gap measuring 0.33 eV. By applying external electric field and introducing strain, one can efficaciously modulate both the band gap and the quantity of charge transfer in the heterojunction, accompanied by the transition of band alignment from Type-II to Type-I, which makes it expected to achieve broader applications in light-emitting diodes, laser detectors and other fields. Ultimately, the heterojunction undergoes a transformation from a semiconducting to a metallic state. Furthermore, the outstanding optical characteristics inherent to each of the two monolayers are preserved, the BAs/WTe2heterojunction also serves to enhance the absorption coefficient and spectral range of the material, particularly within the ultraviolet spectrum. It merits emphasis that the optical properties of the BAs/WTe2heterojunction are capable of modification through the imposition of external electric fields and mechanical strains, which will expand its applicability and potential for future progression within the domains of nanodevices and optoelectronic apparatus.

Recent progress and prospect of graphitic carbon nitride-based photocatalytic materials for inactivation of Microcystis aeruginosa

The proliferation of harmful algal blooms is a global concern due to the risk they pose to the environment and human health. Algal toxins which are hazardous compounds produced by dangerous algae, can potentially kill humans. Researchers have been drawn to photocatalysis because of its clean and energy-saving properties. Graphite carbon nitride (g-C3N4) photocatalysts have been extensively studied for their ability to eliminate algae. These photocatalysts have attracted notice because of their cost-effectiveness, appropriate electronic structure, and exceptional chemical stability. This paper reviews the progress of photocatalytic inactivation of harmful algae by g-C3N4-based materials in recent years. A brief overview is given of a number of the modification techniques on g-C3N4-based photocatalytic materials, as well as the process of inactivating algal cells and destroying their toxins. Additionally, it provides a theoretical framework for future research on the eradication of algae using g-C3N4-based photocatalytic materials.

Solar-Driven Continuous CO2 Reduction to CO and CH4 using Heterogeneous Photothermal Catalysts: Recent Progress and Remaining Challenges

The urgent need to reduce the carbon dioxide level in the atmosphere and keep the effects of climate change manageable has brought the concept of carbon capture and utilization to the forefront of scientific research. Amongst the promising pathways for this conversion, sunlight-powered photothermal processes, synergistically using both thermal and non-thermal effects of light, have gained significant attention. Research in this field focuses both on the development of catalysts and continuous-flow photoreactors, which offer significant advantages over batch reactors, particularly for scale-up. Here, we focus on sunlight-driven photothermal conversion of CO2 to chemical feedstock CO and CH4 as synthetic fuel. This review provides an overview of the recent progress in the development of photothermal catalysts and continuous-flow photoreactors and outlines the remaining challenges in these areas. Furthermore, it provides insight in additional components required to complete photothermal reaction systems for continuous production (e. g., solar concentrators, sensors and artificial light sources). In addition, our review emphasizes the necessity of integrated collaboration between different research areas, like chemistry, material science, chemical engineering, and optics, to establish optimized systems and reach the full potential of this technology.

Progress of charge carrier dynamics and regulation strategies in 2D CxNy-based heterojunctions

Two-dimensional carbon nitrides (CxNy) have gained significant attention in various fields including hydrogen energy development, environmental remediation, optoelectronic devices, and energy storage owing to their extensive surface area, abundant raw materials, high chemical stability, and distinctive physical and chemical characteristics. One effective approach to address the challenges of limited visible light utilization and elevated carrier recombination rates is to establish heterojunctions for CxNy-based single materials (e.g. C2N3, g-C3N4, C3N4, C4N3, C2N, and C3N). The carrier generation, migration, and recombination of heterojunctions with different band alignments have been analyzed starting from the application of CxNy with metal oxides, transition metal sulfides (selenides), conductive carbon, and Cx'Ny' heterojunctions. Additionally, we have explored diverse strategies to enhance heterojunction performance from the perspective of carrier dynamics. In conclusion, we present some overarching observations and insights into the challenges and opportunities associated with the development of advanced CxNy-based heterojunctions.

Fabricating a 3D floating porous PDMS - Ag/AgBr decorated g-C3N4 nanocomposite sponge as a re-usable visible light photocatalyst

In this study, polymeric graphitic carbon nitride (g-C3N4) semiconductors was synthesized via a thermal condensation method. Subsequently, Ag/AgBr nanoparticles with varying ratios were decorated onto the g-C3N4 surface using the water/oil emulsion method. The resulting nanocomposites were characterized using XRD for phase identification and structural analysis, HR-TEM and SEM&EDAX for morphological structure, particle size, and elemental composition analysis, and XPS for investigating the chemical state and electronic structure. The impact of Ag/AgBr content on the optical properties of g-C3N4 were also studied such as (optical bandgap (Eg), refractive index (n), extinction coefficient (k), optical conductivity (σopt) and dielectric function (ε*)), Electrochemical impedance spectroscopy (EIS), PL spectroscopy and Chrono-amperometric investigations were conducted to assess the charge transfer capabilities and long-term durability of the prepared nanocomposites. The results revealed a reduction in Ag/AgBr particle size with an increase in g-C3N4 content, accompanied by a decrease in the optical bandgap from 2.444 eV to 2.393 eV. Furthermore, the nanocomposites exhibited enhanced degradation efficiencies of RhB dye, with the highest tested content of Ag/AgBr achieving 100% degradation after 120 min of irradiation. However, the challenge of catalyst separation after the degradation process remained. To address this issue, we developed a novel approach by impregnating Ag/AgBr@g-C3N4 photocatalyst onto a floating porous sponge using a simple sugar-template technique, offering potential as a reusable photocatalyst material. Furthermore, the 3D PDMS - Ag/AgBr@g-C3N4 photocatalyst was evaluated and found to maintain nearly the same photocatalytic efficiency for up to 5 consecutive cycles.

Exploring Highly Efficient Broadband Self-Trapped-Exciton Luminophors: from 0D to 3D Materials

The review summarizes our recent reports on brightly-emitting materials with varied dimensionality (3D, 2D, 0D) synthesized using "green" chemistry and exhibiting highly efficient photoluminescence (PL) originating from self-trapped exciton (STE) states. The discussion starts with 0D emitters, in particular, ternary indium-based colloidal quantum dots, continues with 2D materials, focusing on single-layer polyheptazine carbon nitride, and further evolves to 3D luminophores, the latter exemplified by lead-free double halide perovskites. The review shows the broadband STE PL to be an inherent feature of many materials produced in mild conditions by "green" chemistry, outlining PL features general for these STE emitters and differences in their photophysical properties. The review is concluded with an outlook on the challenges in the field of STE PL emission and the most promising venues for future research.

Novel surface structure of LaFeO3/nitrogen-deficient g-C3N4 nanocomposites to improve visible-light photocatalytic performance toward phenol removal

Herein, novel surface structure LaFeO3/nitrogen-deficient g-C3N4 nanocomposites (LaFeO3/g-C3N4-H) have been successfully synthesized by a two-step process. First, nitrogen-deficient graphitic carbon nitride (g-C3N4-H) was produced by thermally condensing melamine that had been treated with acetic acid as a precursor. After that, LaFeO3 was incorporated into the g-C3N4-H nanosheets. The as-prepared nanostructured materials were characterized by XRD, FT-IR, N2 adsorption-desorption experiments, FESEM, and TEM, demonstrating the formation of interfacial interaction and heterogeneous structure in LaFeO3/g-C3N4-H nanocomposites. Additionally, UV-vis diffuse reflectance spectra (DRS) and photoluminescence spectra (PL) have been used to assess the optical properties of the nanohybrids. The results show that the LaFeO3/g-C3N4-H nanocomposite was successfully produced with a reliable interfacial interface, and produced a good heterojunction relationship between g-C3N4-H and LaFeO3 which may significantly boost the photocatalytic activity as compared to prinstine g-C3N4 and LaFeO3. Phenol degradation under visible light irradiation was used to test the photocatalytic activity of LaFeO3/g-C3N4-H, and the results showed that 10%-LaFeO3/g-C3N4-H had significant photocatalytic activity and remarkable adsorption efficiency, with an overall removal rate of phenol up to 88% after 180 min of visible light irradiation. This study may present a novel method for developing highly efficient artificial photocatalytic systems.

Exploring the Sensing Potential of g-C3N4 versus Li/g-C3N4 Nanoflakes toward Hazardous Organic Volatiles: A DFT Simulation Study

Ab initio calculations were performed to determine the sensing behavior of g-C3N4 and Li metal-doped g-C3N4 (Li/g-C3N4) quantum dots toward toxic compounds acetamide (AA), benzamide (BA), and their thio-analogues, namely, thioacetamide (TAA) and thiobenzamide (TAA). For optimization and interaction energies, the ωB97XD/6-31G(d,p) level of theory was used. Interaction energies (Eint) illustrate the high thermodynamic stabilities of the designed complexes due to the presence of the noncovalent interactions. The presence of electrostatic forces in some complexes is also observed. The observed trend of Eint in g-C3N4 complexes was BA > TAA > AA > TBA, while in Li/g-C3N4, the trend was BA > AA > TBA > TAA. The electronic properties were studied by frontier molecular orbital (FMO) and natural bond orbital analyses. According to FMO, lithium metal doping greatly enhanced the conductivity of the complexes by generating new HOMOs near the Fermi level. A significant amount of charge transfer was also observed in complexes, reflecting the increase in charge conductivity. NCI and QTAIM analyses evidenced the presence of significant noncovalent dispersion and electrostatic forces in Li/g-C3N4 and respective complexes. Charge decomposition analysis gave an idea of the transfer of charge density between quantum dots and analytes. Finally, TD-DFT explained the optical behavior of the reported complexes. The findings of this study suggested that both bare g-C3N4 and Li/g-C3N4 can effectively be used as atmospheric sensors having excellent adsorbing properties toward toxic analytes.

Iron oxide-promoted photochemical oxygen reduction to hydrogen peroxide (H2O2)

Hydrogen peroxide (H2O2) is a valuable green oxidant with a wide range of applications. Furthermore, it is recognized as a possible future energy carrier achieving safe operation, storage and transportation. The photochemical production of H2O2 serves as a promising alternative to the waste- and energy-intensive anthraquinone process. Following the 12 principles of Green Chemistry, we demonstrate a facile and general approach to sustainable catalyst development utilizing earth-abundant iron and biobased sources only. We developed several iron oxide (FeOx) nanoparticles (NPs) for successful photochemical oxygen reduction to H2O2 under visible light illumination (445 nm). Achieving a selectivity for H2O2 of >99%, the catalyst material could be recycled for up to four consecutive rounds. An apparent quantum yield (AQY) of 0.11% was achieved for the photochemical oxygen reduction to H2O2 with visible light (445 nm) at ambient temperatures and pressures (9.4-14.8 mmol g-1 L-1). Reaching productivities of H2O2 of at least 1.7 ± 0.3 mmol g-1 L-1 h-1, production of H2O2 was further possible via sunlight irradiation and in seawater. Finally, a detailed mechanism has been proposed on the basis of experimental investigation of the catalyst's properties and computational results.

Advances in photocatalytic NO oxidation by Z-scheme heterojunctions

The fast development of urbanisation and industrialisation has led to a rise in nitrogen oxide (NOx) emissions, specifically nitric oxide (NO). One effective method for reducing the harmful effects of this dangerous air pollutant on both human health and the environment is the photocatalytic oxidation of NO. Z-scheme heterojunctions enhance incident light utilisation and increase photocatalytic activity, eventually leading to better NO oxidation performance by encouraging the effective separation of charges and migration. A comprehensive discussion of Z-scheme-based heterojunctions is provided in this review paper, with a focus on their applications in the photocatalytic oxidation of NO. Significant progress has been made in the fabrication of efficient photocatalytic devices in recent years, with Z-scheme-based heterojunctions proving to be particularly successful. The review looks into the various methodologies used to create Z-scheme-based heterojunctions as well as photocatalytic NO oxidation mechanisms. Recent studies on photocatalysts employing Z-scheme heterojunctions for the photocatalytic oxidation of NO are also discussed. The possibilities for new opportunities as well as the present challenges, barriers, advances, and solutions have been emphasized.

A facile synthesis process of GCN/ZnO-Cu nanocomposite and the evaluation of the performance for the photocatalytic degradation of organic pollutants and the disinfection of wastewater under visible light

In this research, graphitic carbon nitride/zinc oxide-copper denoted as GCN/ZnO-Cu nanocomposite photocatalysts were synthesized using a novel facile synthesis process, the co-exfoliation method involving ultrasonic exfoliation of the mixture of GCN and ZnO-Cu in ethanol and then thermal exfoliation. Different characterization techniques such as X-ray diffraction (XRD), mean crystallite size (MCS), BET surface area, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), particle size distribution (PSD), Fourier transform-infrared spectroscopy (FT-IR), photoluminescence (PL) spectra, and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS) were conducted to study the crystallinity, morphology, elemental composition, chemical structure, and optoelectronic properties. The band gap was estimated using the UV-Vis DRS results and Tauc plots. The photocatalytic activity of the GCN/ZnO-Cu3% nanocomposites was evaluated in the degradation of 4-chlorophenol (4-CP), and the disinfection of wastewater primary influent under a narrowband visible light source, royal blue LED (λ = 450 nm). GCN/0.1ZnO-Cu3% nanocomposite showed the best performance in the degradation of 4-CP and the disinfection of municipal wastewater primary influent. For 4-CP degradation, GCN/0.1ZnO-Cu3% was 2.2 times better than GCN, 9.4 times better than ZnO-Cu3%, and 1.8 times better than the sum of the individual GCN and ZnO-Cu3%. A 5.5 log reduction was achieved for the disinfection of total coliforms in wastewater primary influent in 360 min. This enhanced photocatalytic activity of GCN/ZnO-Cu3% nanocomposite can be attributed to the synergistic of GCN and the ZnO-Cu3%, resulting in a large surface area and improved bandgap.

MoO2 Pump-Enhanced Flexible TiO2 Nanojungle-Based Chemiresistors for Rapid Room-Temperature Detection of H2S at Parts-per-Billion Levels

In this study, we developed a gas sensing platform that can sensitively and specifically detect trace H2S in a high-humidity atmosphere at RT. Upon integrating a carbon nitride (C3N4) nanofilm and molybdenum dioxide (MoO2) nanosheets onto nanojungle-like TiO2 nanotube arrays (TiNTs), the fabricated chemiresistor showed rapid response (38 s)/recovery (58 s) abilities and remarkable detection sensitivity for H2S at concentrations down to 2 ppb, with an estimated detection limit of 1.13 ppb at RT and room-environmental light (REL). Importantly, the gas sensor exhibited satisfactory H2S sensing performance even in dark conditions with a response of 1.9 at 200 ppb. In this design, apart from the architectural advantages of the nanojungle-like TiNTs for accelerating the gas flow efficiency and the abundant sensing sites provided by the C3N4 film, the MoO2 nanosheets act as the essential electron pump not only for the H2S response but also for the subsequent recovery process in air. After employing the MoO2 pump onto C3N4/TiNTs, the response time and recovery time of the system are shortened to ∼35 and ∼11%, respectively. Moreover, we demonstrated the good performance of the flexible gas sensor in detecting trace H2S in human exhaled breath with good humidity resistance. These results highlight the possibility of designing chemiresistors operating in RT and REL conditions and to use these environmentally friendly TiO2-based sensors in real applications.

Defect engineering enhances plasmonic-hot electrons exploitation for CO2 reduction over polymeric catalysts

Defect sites present on the surface of catalysts serve a crucial role in different catalytic processes. Herein, we have investigated defect engineering within a hybrid system composed of "soft" polymer catalysts and "hard" metal nanoparticles, employing the disparity in their thermal expansions. Electron paramagnetic resonance, X-ray photoelectron spectroscopy, and mechanistic studies together reveal the formation of new abundant defects and their synergistic integrability with plasmonic enhancement within the hybrid catalyst. These active defects, co-localized with plasmonic Ag nanoparticles, promote the utilization efficiency of hot electrons generated by local plasmons, thereby enhancing the CO2 photoreduction activity while maintaining the high catalytic selectivity.

Nano-semiconductor material stabilized Zn metal anode for long-life aqueous Zn-ion batteries

The advantages of aqueous Zn-ion batteries lie in the affordability and environmental friendliness. Nonetheless, the use of aqueous Zn-ion batteries is severely hindered by key issues such dendrite formation and side reactions in Zn metal anodes. It is able to works well so as to create a stable interface layer, which controls the development of dendrites and adverse reactions. In this study, it is recommended that the coating formed by nano-semiconductor material graphitic carbon nitride (g-C3N4) should be applied to the surface of Zn metal to evenly disperse the electric field, as well as inhibit the development of tip effect, thus preventing Zn dendrite growth. Zn deposition occurs quickly and steadily as a result of Zn2+ ions being adsorbed and the Zn2+ ion flow being reallocated by the zincophilicity of N atoms in the coating. The Zn symmetrical battery can be stable cycled for 1,000 h at a current density of 0.5 mA cm-2, with its overall areal capacity of 0.5mAh cm-2, which is attributed to these benefits of the coating. It can be stable circulated for 500 h at a high current density of 5 mA cm-2, with its total areal capacity of 1mAh cm-2. The completely constructed Zn-g-C3N4//V2O5 according exhibits exceptional long-termcycle stability. Under the current density of 2 A/g, the initial capacity is 312.3 mAh g-1, which can cycle be stable circulated for 1,000 cycles.Under the high current density of 5 A/g, the whole battery's capacity keeping holdingrate is 70% after 2000 cycles, and the coulomb efficiency (CE) is extremely near to 100%.

Bandgap Engineering of Melon using Highly Reduced Graphene Oxide for Enhanced Photoelectrochemical Hydrogen Evolution

The uncondensed form of polymeric carbon nitrides (PCN), generally known as melon, is a stacked 2D structure of poly(aminoimino)heptazine. Melon is used as a photocatalyst in solar energy conversion applications, but suffers from poor photoconversion efficiency due to weak optical absorption in the visible spectrum, high activation energy, and inefficient separation of photoexcited charge carriers. Experimental and theoretical studies are reported to engineer the bandgap of melon with highly reduced graphene oxide (HRG). Three HRG@melon nanocomposites with different HRG:melon ratios (0.5%, 1%, and 2%) are prepared. The 1% HRG@melon nanocomposite shows higher photocurrent density (71 µA cm-2 ) than melon (24 µA cm-2 ) in alkaline conditions. The addition of a hole scavenger further increases the photocurrent density to 630 µA cm-2 relative to the reversible hydrogen electrode (RHE). These experimental results are validated by calculations using density functional theory (DFT), which revealed that HRG results in a significant charge redistribution and an improved photocatalytic hydrogen evolution reaction (HER).

Metal Ion Coordination Improves Graphite Nitride Carbon Microwave Therapy in Antibacterial and Osteomyelitis Treatment

The ability to effectively treat deep bacterial infections while promoting osteogenesis is the biggest treatment demand for diseases such as osteomyelitis. Microwave therapy is widely studied due to its remarkable ability to penetrate deep tissue. This paper focuses on the development of a microwave-responsive system, namely, a zinc ion (Zn2+ ) doped graphite carbon nitride (CN) system (BZCN), achieved through two high-temperature burning processes. By subjecting composite materials to microwave irradiation, an impressive 99.81% eradication of Staphylococcus aureus is observed within 15 min. Moreover, this treatment enhances the growth of bone marrow stromal cells. The Zn2+ doping effectively alters the electronic structure of CN, resulting in the generation of a substantial number of free electrons on the material's surface. Under microwave stimulation, sodium ions collide and ionize with the free electrons generated by BZCN, generating a large amount of energy, which reacts with water and oxygen, producing reactive oxygen species. In addition, Zn2+ doping improves the conductivity of CN and increases the number of unsaturated electrons. Under microwave irradiation, polar molecules undergo movement and generate frictional heat. Finally, the released Zn2+ promotes macrophages to polarize toward the M2 phenotype, which is beneficial for tibial repair.

Multifunctional carbon nitride nanoarchitectures for catalysis

Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.

Composite Foams of the Graphitic Carbon Nitride@Carbon Nanofibrils Conferred a Superamphiphilic Property and Reinforced Thermal Stability

Herein, we demonstrated the preparation of novel three-dimensional (3D) superamphiphilic g-C3N4@carbon nanofibers foam (g-C3N4@CNFs) via a two-step approach: liquid nitrogen treatment-freeze-drying; the foams possessed good thermal stability. In this approach, melamine acted as a nitrogen source, and nanofibrillated cellulose (NFCs) functioned as a 3D skeleton. The thermal stability of the as-prepared g-C3N4@CNFs-3 foam was much higher than that of g-C3N4@CNFs-1, as indicated by thermogravimetric data, including an increase of the onset weight loss point (Tonset) by 238.6 °C and an improvement of the maximal weight loss rate (Tmax) by 258.8 °C. The combination of g-C3N4 with CNFs conferred a reduction in the heat release rate (ca. -86%) and the total heat release (ca. -75%). Furthermore, the composition of the hydrophilically oxygenated functional groups and hydrophobic triazine domains in g-C3N4@CNFs rendered it a unique amphiphilic property (contact angle close to 0° within 1.0 s for water and 0° within 12 ms for hexane). A high storage capacity for water and various organic solvents of the superamphiphilic g-C3N4@CNFs foam was found, up to 40-50 times its original weight. The discovery of these superamphiphilic foams is of great significance for the development of superwetting materials and may find their applications in oil emulsion purification and catalyst support fields.

Design strategies and mechanisms of g-C3N4-based photoanodes for photoelectrocatalytic degradation of organic pollutants in water

Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.

Aminosilanized Interface Promotes Electrochemically Stable Carbon Nitride Films with Fewer Trap States on FTO for (Photo)electrochemical Systems

We have demonstrated the direct growth of a CNx layer on a plasma-cleaned and aminosilanized F-doped SnO2 (FTO) electrode to study the CNx|FTO interface that is critical for (photo)electrocatalytic systems. The (3-aminopropyl)triethoxysilane (APTES) was chosen as a bifunctional organosilane, with the amino end incorporating into CNx and the silane end connecting to the hydroxylated FTO surface. Plasma cleaning and aminosilanization resulted in a highly hydrophilic surface, which leads to better contact of melted thiourea to the aminosilanized FTO (p-FTONH2) during CNx polymer condensation, thus generating a thinner and more compact CNx layer. The modification at the interface was shown to influence the CNx growth on length scales of tens of micrometers. We grew CNx thin films on p-FTONH2 (CNx/p-FTONH2) and nonaminosilanized p-FTO (CNx/p-FTO). CNx/p-FTONH2 had a smaller density of trap states and passed 2.4 times the charges before failure compared to CNx/p-FTO. Additionally, a 40% decrease in interfacial charge transfer resistance at the CNx|electrolyte interface was measured for CNx/p-FTONH2 compared to CNx/p-FTO under -0.5 V vs RHE in 0.1 M Na2SO4. Furthermore, with the CNx surface coated with a Pt cocatalyst, Pt/CNx/p-FTONH2 exhibited faster hydrogen evolution rates and larger current densities than Pt/CNx/p-FTO. The highest Faraday efficiency toward electrochemical hydrogen evolution (FEH2) in 0.1 M Na2SO4 (pH = 7) was 46.1%, 37.3%, 57.7%, and 70.5% for Pt/CNx/p-FTONH2, Pt/CNx/p-FTO, CNx/p-FTONH2, and CNx/p-FTO, respectively. The increase in hydrogen evolution rate did not follow the magnitude of the current density change, indicating electrochemical processes other than proton reduction. Overall, we have carefully investigated the CNx|FTO interface and suggested potential solutions to make CNx films better (photo)electrodes for (photo)electrochemical systems.

Enhanced photocatalytic degradation of levofloxacin over heterostructured C3N4/Nb2O5 system under visible light

The growing usage of antibiotics and their subsequent release in water bodies have become a serious environmental concern. In this study, heterostructured photocatalysts C3N4/Nb2O5 have been synthesized using a simple hydrothermal method and applied to facilitate the degradation of the widely used antibiotic levofloxacin. The structural, morphological, and optical properties of the photocatalysts were characterized using XRD, SEM, TEM, UV-Vis and PL to establish the structure-property relationship. The type-II heterojunctions C3N4/Nb2O5 show remarkable activity under visible light irradiation, where Nb2O5 facilitates preferential adsorption of levofloxacin at the catalyst surface while C3N4 extends visible light absorption. This synergy resulted in superior catalytic performance (91%) in the optimized system, exceeding that of individual materials (Nb2O5 30% and C3N4 56%). The effect of catalyst dosage, pH, oxygen and point of zero is also investigated. The process is mainly photo-driven, and the trapping experiments reveal superoxide radicals as key species responsible for the degradation. Additionally, the adsorption behaviour, reformation of the degraded pollutant and reusability factors are evaluated to assess the practical feasibility of the photocatalytic system.

Fabricating carbon quantum dots of graphitic carbon nitride vis ultrasonic exfoliation for highly efficient H2O2 production

A promising and sustainable approach for producing hydrogen peroxide is the two-electron oxygen reduction reaction (2e- ORR), which uses very stable graphitic carbon nitride (g-C3N4). However, the catalytic performance of pristine g-C3N4 is still far from satisfactory. Here, we demonstrate for the first time the controlled fabrication of carbon quantum dots (CQDs)-modified graphitic carbon nitride carbon (g-C3N4/CQDs-X) by ultrasonic stripping for efficient 2e- ORR electrocatalysis. HRTEM, UV-vis, EPR and EIS analyses are in good consistent which prove the in-situ generation of CQDs. The effect of sonication time on the physical properties and ORR activity of g-C3N4 is discussed for the first time. The g-C3N4/CQDs-12 catalyst shows a selectivity of up to 95% at a potential of 0.35 V vs. RHE, which is much higher than that of the original g-C3N4 catalyst (88%). Additionally, the H2O2 yield is up to 1466.6 mmol g-1 in 12 h, which is twice as high as the original g-C3N4 catalyst. It is discovered that the addition of CQDs through ultrasonic improves the g-C3N4 catalyst's electrical conductivity and electron transfer capability in addition to its high specific surface area and distinctive porous structure, speeding up the reaction rate. This research offers a green method for enhancing g-C3N4 activity.

Streamlining efficient and selective synthesis of benzoxanthenones and xanthenes with dual catalysts on a single support

Using two catalysts on a single support can improve reaction efficiency, higher yields, improved selectivity, and simplified reaction conditions, making it a valuable approach for industrial transformation. Herein, we describe the development of a novel and effective heterogeneous catalyst, WCl6/CuCl2, supported on graphitic carbon nitride (W/Cu@g-C3N4), which was synthesized under hydrothermal conditions. The structure and morphology properties of the W/Cu@g-C3N4 were characterized using various spectroscopic techniques, including FTIR, XRD, TEM, TGA, EDX, and SEM. The W/Cu@g-C3N4 support material enabled the rapid and efficient synthesis of benzoxanthenones and xanthenes derivatives in high yields under mild reaction conditions and short reaction times. The W/Cu@g-C3N4 catalyst was also found to be easily recyclable, and its catalytic performance did not significantly decrease after five times use. The findings suggest that W/Cu@g-C3N4 is a promising chemical synthesis catalyst with significant implications for sustainable and cost-effective organic synthesis.

Transforming the Petroleum Industry through Catalytic Oxidation Reactions vis-à-vis Preceramic Polymer Catalyst Supports

Preceramic polymers, for instance, are used in a variety of chemical processing industries and applications. In this contribution, we report on the catalytic oxidation reactions generated using preceramic polymer catalyst supports. Also, we report the full knowledge of the use of the remarkable catalytic oxidation, and the excellent structures of these preceramic polymer catalyst supports are revealed. This finding, on the other hand, focuses on the functionality and efficacy of future applications of catalytic oxidation of preceramic polymer nanocrystals for energy and environmental treatment. The aim is to design future implementations that can address potential environmental impacts associated with fuel production, particularly in downstream petroleum industry processes. As a result, these materials are being considered as viable candidates for environmentally friendly applications such as refined fuel production and related environmental treatment.

Photocatalytic water splitting for hydrogen production with high efficiency monolayer In2Te5: a theoretical study

Employing density functional theory (DFT) calculations, we explore the excellent performance of two-dimensional (2D) semiconductor In2Te5 in photocatalytic water splitting at the theoretical level. The calculated results illustrate that 2D In2Te5 is a direct band gap semiconductor with a moderate band gap value and an ultrahigh optical absorption coefficient in the visible light region. It was found that its conduction band edge is higher than the reduction potential of water (-4.44 eV), which proves that it can split water to produce hydrogen. Furthermore, its excellent hydrogen evolution activity can be tuned under an appropriate biaxial strain. In addition, 2D In2Te5 shows a remarkable photo-generated current, suggesting that electrons and holes can be separated efficiently. Our results offer a superior candidate material for realizing photocatalytic water splitting for hydrogen evolution.

Effect of molten-salt modulation on the composition and structure of g-C3N4-based photocatalysts

Graphitic carbon nitride (g-C3N4), as an attractive metal-free polymer photocatalyst, has attracted extensive attention in energy and environmental fields in recent years. The photoactivity of bulk g-C3N4 is moderate on account of solid-phase thermal-condensation synthesis. This leads to inadequate light absorption, limited surface area, and easy recombination of charge carriers. The composition and nanostructure of g-C3N4 have been studied extensively. Molten-salt modulation is fascinating because of its "green" credentials and the properties of liquid-phase reaction systems. The review focuses mainly on molten-salt modulation of the composition and structure of g-C3N4 based-photocatalysts. We focus on elemental doping, molecular doping, and defect engineering, as well as control of the crystal structure, multi-dimensional structure, hom/heterostructures for photocatalytic applications. This review provides new insights to develop g-C3N4-based photocatalysts with control of composition and structure by facile molten-salt modulation in energy-conversion and environmental fields.

Hydrogen Evolution Activity of Nitrogen-Rich g-C3-xN4+x Synthesized by Solid-Gas Interface Method

Synthesis of a metal-free carbon nitride (g-C3N4) photocatalyst in the form of nitrogen-rich g-C3-xN4+x derivatives is desirable for efficient solar to hydrogen conversion and remains a challenging task to achieve. Herein we report the development of homogeneous sheets of nitrogen-rich graphitic carbon nitride samples from melamine by a solid-gas interface approach. Using this method, pure g-C3N4 (CN), g-C3-xN4+x under ammonia flow (CN-NH3) and g-C3-xN4+x under nitrogen flow (CN-N2) are prepared. The g-C3-xN4+x (CN-NH3) sample shows better surface conductivity, wide optical absorbance in the visible region, reduced recombination and high electron donor density, and higher performance toward photoelectrochemical hydrogen evolution (HER). The g-C3-xN4+x (CN-NH3) generates a photocurrent of 2.06 μA cm-2, which is 2.5 times higher than that of the pure g-C3N4 (CN) sample (0.85 μA cm-2). It also shows higher photocatalytic water splitting ability compared to the CN and CN-N2 samples, generating 634 μmol g-1 hydrogen without cocatalyst and 1163 μmol g-1 of hydrogen with Pt cocatalyst. Density functional calculations suggest that the progressive band gap reduction with the increase in the N-dopant percentage can be attributed to the gradual increase in the partial π-occupations, which can lead to a significant stabilization of the conduction band minima. The theoretical modeling, however, indicates a saturation in the band gap effect after 75% of N-dopant. The onset potential of g-C3-xN4+x for HER appears at η = 0.43 V in dark and η = 0.34 V vs Ag/AgCl under solar light illumination of 1 sun.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.