Higher Acenes by On-Surface Dehydrogenation: From Heptacene to Undecacene

Two-Dimensional Nonbenzenoid Heteroacene Crystals Synthesized via In-Situ Embedding of Ladder Bipyrazinylenes on Au(111)

Precisely introducing topological defects is an important strategy in nanographene crystal engineering because defects can tune π-electronic structures and control molecular assemblies. The synergistic control of the synthesis and assembly of nanographenes by embedding the topological defects to afford two-dimensional (2D) crystals on surfaces is still a great challenge. By in-situ embedding ladder bipyrazinylene (LBPy) into acene, the narrowest nanographene with zigzag edges, we have achieved the precise preparation of 2D nonbenzenoid heteroacene crystals on Au(111). Through intramolecular electrocyclization of o-diisocyanides and Au adatom-directed [2+2] cycloaddition, the nonbenzenoid heteroacene products are produced with high chemoselectivity, and lead to the molecular 2D assembly via LBPy-derived interlocking hydrogen bonds. Using bond-resolved scanning tunneling microscopy, we determined the atomic structures of the nonbenzenoid heteroacene product and diverse organometallic intermediates. The tunneling spectroscopy measurements revealed the electronic structure of the nonbenzenoid heteroacene, which is supported by density functional theory (DFT) calculations. The observed distinct organometallic intermediates during progression annealing combined with DFT calculations demonstrated that LBPy formation proceeds via electrocyclization of o-diisocyanides, trapping of heteroarynes by Au adatoms, and stepwise elimination of Au adatoms.

BN-Isosteres of Nonacene with Antiaromatic B2 C4 and N2 C4 Heterocycles: Synthesis and Strong Luminescence

Embedding both boron and nitrogen into the backbone of acenes to generate their isoelectronic structures has significantly enriched the acene chemistry to offer appealing properties. However, only small BN-heteroacenes have been extensively investigated, with BN-heptacenes as the hitherto longest homologue. Herein, we report the synthesis of three new nonacene BN-isosteres via incorporating a pair of antiaromatic B2 C4 and N2 C4 heterocycles, representing a new length record for BN-heteroacenes. The distance between the B2 C4 and N2 C4 rings affects the contribution of the charge-separated resonance forms, leading to tunable antiaromaticity of the two heterocycles. The adjusted local antiaromaticity manifests substantial influence on the molecular orbital arrangement, and consequently, the radiative transition rate of BN-3 is greatly enhanced compared with BN-1 and BN-2, realizing a high fluorescence quantum yield of 92 %. This work provides a novel design concept of large acene BN-isosteres and reveals the importance of BN/CC isosterism on their luminescent properties.

Gas Phase Ionization Energy of Heptacene

The ionization energy is a fundamental property that is relevant to charge transport in organic semiconductors. We report adiabatic ionization energies (AIEs) of heptacene at 6.21 and 7.20 eV for the X̃+B2g and Ã+Au states, respectively, as the next larger member of the acene series using mass- and isomer-selective double imaging photoelectron photoion coincidence spectroscopy. The X̃+ state energy decreases monotonically with an increase in size within the homologous series of acenes and approaches an asymptotic limit [AIE(polyacene) = 5.94 ± 0.06 eV] based on a fit with an exponential decay function. As byproducts of heptacene formation from cycloreversion of diheptacenes, 5,18-, 7,16-, and 6,17-dihydroheptacene can be detected, and their AIE is similar to that of their largest acene subunit (anthracene and tetracene, respectively), in very good agreement with computational treatments.

On-Surface Synthesis and Determination of the Open-Shell Singlet Ground State of Tridecacene

The character of the electronic structure of acenes has been the subject of longstanding discussion. However, convincing experimental evidence of their open-shell character has so far been missing. Here, we present the on-surface synthesis of tridecacene molecules by thermal annealing of octahydrotridecacene on a Au(111) surface. We characterized the electronic structure of the tridecacene by scanning probe microscopy, which reveals the presence of an inelastic signal at 126 meV. We attribute the inelastic signal to spin excitation from the singlet diradical ground state to the triplet excited state. To rationalize the experimental findings, we carried out many-body ab initio calculations as well as model Hamiltonians to take into account the effect of the metallic substrate. Moreover, we provide a detailed analysis of how the dynamic electron correlation and virtual charge fluctuation between the molecule and metallic surface reduces the singlet-triplet band gap. Thus, this work provides the first experimental confirmation of the magnetic character of tridecacene.

Synthesis of Tridecacene by Multistep Single-Molecule Manipulation

Acenes represent a unique class of polycyclic aromatic hydrocarbons that have fascinated chemists and physicists due to their exceptional potential for use in organic electronics. While recent advances in on-surface synthesis have resulted in higher acenes up to dodecacene, a comprehensive understanding of their fundamental properties necessitates their expansion toward even longer homologues. Here, we demonstrate the on-surface synthesis of tridecacene via atom-manipulation-induced conformational preparation and dissociation of a trietheno-bridged precursor on a Au(111) surface. The generated tridecacene has been investigated by scanning tunneling microscopy and spectroscopy (STM/STS), combined with first-principles calculations. We observe that the STS transport gap (1.09 eV) shrinks again following the gap reopening of dodecacene (1.4 eV). Spin-polarized density functional theory calculations confirm an antiferromagnetic open-shell ground-state electronic configuration for tridecacene in the gas phase. Interestingly, tridecacene's open-shell character is significantly reduced upon interaction with the Au(111) surface despite being only physisorbed. The interaction with the surface leads to a lowering of the magnetization of tridecacene, a reduced gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), compared to the gas phase, and a reduced relative energy to the nonmagnetic state, making it nearly isoenergetic. These observations show qualitatively that the influence of the Au(111) substrate on the properties of long acenes is significant, which is important for interpreting the measured STS transport gaps. Our work contributes to a fundamental understanding of the electronic properties of long acenes, confirming a nonmonotonous length-dependent HOMO-LUMO gap, and to the development of multistep tip-assisted synthesis of elusive compounds.

On surface synthesis of an eleven-ring sulfur-doped nonacene

Dithienoacenes with a heptacene core, heptaceno[2,3-b:11,12-b']bis[1]benzothiophene, have been synthesized through the combination of solution and surface assisted chemistry. The atomic composition, structural arrangement and electronic properties of the molecules on the Au(111) surface have been deeply explored by non-contact atomic force microscopy (nc-AFM), bond-resolved scanning tunnelling microscopy (BR-STM) and scanning tunneling spectroscopy (STS) corroborated by density functional theory (DFT) calculations. Our combined experiments reveal modifications induced by sulfur substitution.

Sequential On-Surface Cyclodehydrogenation in a Nonplanar Nanographene

On-surface synthesis has emerged as an attractive method for the atomically precise synthesis of new molecular nanostructures, being complementary to the widespread approach based on solution chemistry. It has been particularly successful in the synthesis of graphene nanoribbons and nanographenes. In both cases, the target compound is often generated through cyclodehydrogenation reactions, leading to planarization and the formation of hexagonal rings. To improve the flexibility and tunability of molecular units, however, the incorporation of other, nonbenzenoid, subunits is highly desirable. In this letter, we thoroughly analyze sequential cyclodehydrogenation reactions with a custom-designed molecular precursor. We demonstrate the step-by-step formation of hexagonal and pentagonal rings from the nonplanar precursor within fjord and cove regions, respectively. Computer models comprehensively support the experimental observations, revealing that both reactions imply an initial hydrogen abstraction and a final [1,2] hydrogen shift, but the formation of a pentagonal ring proceeds through a radical mechanism.

Hexakis-TIPS-Alkynylated Nonacenes: Persistent and Processible

Four substituted nonacenes were prepared and characterized by UV-vis and EPR spectroscopy and X-ray crystallography. The compounds are the most stable and soluble nonacenes to date - due to six strategically placed triisopropylsilyl(TIPS)-ethynyl groups. They are stable for several weeks in the solid state. In dilute solution their half-life is 5-9 h. Crystal structure analyses of two nonacenes prove their structures. A nonacene derivative was tested in a solution-processed transistor and exhibits ambipolar charge transport (μe =0.007 cm2 /Vs; μh =0.023 cm2 /Vs).

Orientation, electronic decoupling and band dispersion of heptacene on modified and nanopatterned copper surfaces

The adsorption of heptacene (7 A) on Cu(110) and Cu(110)-(2 × 1)-O was studied with scanning tunneling microscopy, photoemission orbital tomography and density functional calculations to reveal the influence of surface passivation on the molecular geometry and electronic states. We found that the charge transfer into the 7 A molecules on Cu(110) is completely suppressed for the oxygen-modified Cu surface. The molecules are aligned along the Cu-O rows and uncharged. They are tilted due to the geometry enforced by the substrate and the ability to maximize intermolecular π-π overlap, which leads to strong π-band dispersion. The HOMO-LUMO gap of these decoupled molecules is significantly larger than that reported on weakly interacting metal surfaces. Finally, the Cu-O stripe phase was used as a template for nanostructured molecular growth and to assess possible confinement effects.

Synthesis and evaluation of DAG-lactone derivatives with HIV-1 latency reversing activity

Cells latently infected with human immunodeficiency virus type 1 (HIV-1) prevent people living with HIV-1 from obtaining a cure to the infectious disease. Latency reversing agents (LRAs) such as protein kinase C (PKC) activators and histone deacetylase (HDAC) inhibitors can reactivate cells latently infected with HIV-1. Several trials based on treatment with HDAC inhibitors alone, however, failed to reduce the number of latent HIV-1 reservoirs. Herein, we have focused on a diacylglycerol (DAG)-lactone derivative, YSE028 (1), which is a PKC activator with latency reversing activity and no significant cytotoxicity. Caspase-3 activation of YSE028 (1) led to cell apoptosis, specifically in HIV-1 latently infected cells. Structure-activity relationship studies of YSE028 (1) have produced several useful derivatives. Among these, compound 2 is approximately ten times more potent than YSE028 (1) in reactivation of cells latently infected with HIV-1. The activity of DAG-lactone derivatives was correlated with the binding affinity for PKC and the stability against esterase-mediated hydrolysis.

Triangle Counting Rule: An Approach to Forecast the Magnetic Properties of Benzenoid Polycyclic Hydrocarbons

Open-shell benzenoid polycyclic hydrocarbons (BPHs) are promising materials for future quantum applications. However, the search for and realization of open-shell BPHs with desired properties is a challenging task due to the gigantic chemical space of BPHs, requiring new strategies for both theoretical understanding and experimental advancement. In this work, by building a structure database of BPHs through graphical enumeration, performing data-driven analysis, and combining tight-binding and mean-field Hubbard calculations, we discovered that the number of the internal vertices of the BPH graphs is closely correlated to their open-shell characters. We further established a simple rule, the triangle counting rule, to predict the magnetic ground states of BPHs. These findings not only provide a database of open-shell BPHs, but also extend the well-known Lieb's theorem and Ovchinnikov's rule and provide a straightforward method for designing open-shell carbon nanostructures. These insights may aid in the exploration of emerging quantum phases and the development of magnetic carbon materials for technology applications.

Impact of Di- and Poly-Radical Characters on the Relative Energy of the Doubly Excited and La States of Linear Acenes and Cyclacenes

Linear and cyclic acenes are polycyclic aromatic hydrocarbons that can be viewed as building blocks of graphene nanoribbons and carbon nanotubes, respectively. While short linear acenes demonstrated remarkable efficiency in several optoelectronic applications, the longer members are unstable and difficult to synthesize as their cyclic counterparts. Recent progress in on-surface synthesis, a powerful tool to prepare highly reactive species, opens promising perspectives and motivates the computational investigations of these potentially functional molecules. Owing to their di- and poly-radical character, low-lying excited states dominated by doubly excited configurations are expected to become more important for longer members of both linear and cyclic molecules. In this work, we investigate the lowest-lying La and the doubly excited (DE) state of linear acenes and cyclacenes, with different computational approaches, to assess the influence of the di-/poly-radical characters (increasing with the molecular dimensions) on their relative order. We show that DFT/MRCI calculations correctly reproduce the crossing of the two states for longer linear acenes, while TDUDFT calculations fail to predict the correct excitation energy trend of the DE state. The study suggests a similarity in the excited electronic state pattern of long linear and cyclic acenes leading ultimately to a lowest lying dark DE state for both.

On-Surface Synthesis of Nanographenes and Graphene Nanoribbons on Titanium Dioxide

The formation of two types of nanographenes from custom designed and synthesized molecular precursors has been achieved through thermally induced intramolecular cyclodehydrogenation reactions on the semiconducting TiO₂(110)-(1×1) surface, confirmed by the combination of high-resolution scanning tunneling microscopy (STM) and spectroscopy (STS) measurements, and corroborated by theoretical modeling. The application of this protocol on differently shaped molecular precursors demonstrates the ability to induce a highly efficient planarization reaction both within strained pentahelicenes as well as between vicinal phenyl rings. Additionally, by the combination of successive Ullmann-type polymerization and cyclodehydrogenation reactions, the archetypic 7-armchair graphene nanoribbons (7-AGNRs) have also been fabricated on the titanium dioxide surface from the standard 10,10'-dibromo-9,9'-bianthryl (DBBA) molecular precursors. These examples of the effective cyclodehydrogenative planarization processes provide perspectives for the rational design and synthesis of molecular nanostructures on semiconductors.

Excitation energies of polycylic aromatic hydrocarbons by double-hybrid functionals: Assessing the PBE0-DH and PBE-QIDH models and their range-separated versions

A family of non-empirical double-hybrid (DH) density functionals, such as Perdew-Burke-Ernzerhof (PBE)0-DH, PBE-QIDH, and their range-separated exchange (RSX) versions RSX-0DH and RSX-QIDH, all using Perdew-Burke-Ernzerhof(PBE) exchange and correlationfunctionals, is applied here to calculate the excitation energies for increasingly longer linear and cyclic acenes as part of their intense benchmarking for excited states of all types. The energies for the two lowest-lying singlet ¹L_a and ¹L_b states of linear oligoacenes as well as the triplet ³L_a and ³L_b states, are calculated and compared with experimental results. These functionals clearly outperform the results obtained from hybrid functionals and favorably compare with other double-hybrid expressions also tested here, such as B2-PLYP, B2GP-PLYP, ωB2-PLYP, and ωB2GP-PLYP. The study is complemented by the computation of adiabatic S₀-T₁ singlet-triplet energy difference for linear acenes as well as the extension of the study to strained cyclic oligomers, showing how the family of non-empirical expressions robustly leads to competitive results.

Curious Case of Singlet Triplet Gaps in Nonlinear Polyaromatic Hydrocarbons

The singlet triplet (ST) gap of linear polyacenes decays exponentially with the system size as a result of extended conjugation and reducing highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps. These low ST gaps can ideally be leveraged toward energy applications but are hindered by the decreasing stability of the systems. Thus, there is the need to understand the ST gap of nonlinear polyacenes, which are markedly more stable than their linear counterparts. Here, we show that the ST gaps of the nonlinear polyacenes do not decrease with the system size and have no correlation with the HOMO-LUMO gaps or increased conjugation. The reason behind this is identified as the high multireference character of the triplet high-spin state. These unprecedented results are in stark contrast to the observations in linear polyacenes and are due to the combined effects of topology and geometrical factors.

A Stable Hexaazaoctacene Cruciform σ-Dimer

Buchwald-Hartwig coupling of a triisopropylsilyl (TIPS)-ethynylated dibromo-N,N'-dihydrotetraazapentacene with 1,4-bis(TIPS-ethynyl)-2,3-diaminonaphthalene furnishes a dihydrohexaazaoctacene. Its oxidation with MnO₂ results in a 7,7'-bi(hexaazaoctacenyl). In addition to eight TIPS-ethynyl groups, the bioctacene motif protects the azaoctacene subunits. The biazaoctacenyl displays a τ_1/2 of > 5 d in dilute solution under ambient conditions. In the crystalline state it is persistent for > 10 months.

Surface-Assisted Synthesis of N-Containing π-Conjugated Polymers

On-surface synthesis has recently emerged as a powerful strategy to design conjugated polymers previously precluded in conventional solution chemistry. Here, an N-containing pentacene-based precursor (tetraazapentacene) is ex-professo synthesized endowed with terminal dibromomethylene (:CBr₂ ) groups to steer homocoupling via dehalogenation on metallic supports. Combined scanning probe microscopy investigations complemented by theoretical calculations reveal how the substrate selection drives different reaction mechanisms. On Ag(111) the dissociation of bromine atoms at room temperature triggers the homocoupling of tetraazapentacene units together with the binding of silver adatoms to the nitrogen atoms of the monomers giving rise to a N-containing conjugated coordination polymer (P1). Subsequently, P1 undergoes ladderization at 200 °C, affording a pyrrolopyrrole-bridged conjugated polymer (P2). On Au(111) the formation of the intermediate polymer P1 is not observed and, instead, after annealing at 100 °C, the conjugated ladder polymer P2 is obtained, revealing the crucial role of metal adatoms on Ag(111) as compared to Au(111). Finally, on Ag(100) the loss of :CBr2 groups affords the formation of tetraazapentacene monomers, which coexist with polymer P1. Our results contribute to introduce protocols for the synthesis of N-containing conjugated polymers, illustrating the selective role of the metallic support in the underlying reaction mechanisms.

Low-Dimensional Porous Carbon Networks Using Single-/Triple-Coupling Polycyclic Hydrocarbon Precursors

Polycyclic hydrocarbons (PHs) share the same hexagonal structure of sp² carbons as graphene but possess an energy gap due to quantum confinement effect. PHs can be synthesized by a bottom-up strategy starting from small building blocks covalently bonded into large 2D organic sheets. Further investigation of the role of the covalent bonding/coupling ways on their electronic properties is needed. Here, we demonstrate a surface-mediated synthesis of hexa-peri-hexabenzocoronene (HBC) and its extended HBC oligomers (dimers, trimers, and tetramers) via single- and triple-coupling ways and reveal the implication of different covalent bonding on their electronic properties. High-resolution low-temperature scanning tunneling microscopy and noncontact atomic force microscopy are employed to in situ determine the atomic structures of as-synthesized HBC oligomers. Scanning tunneling spectroscopy measurements show that the length extension of HBC oligomers narrows the energy gap between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO). Furthermore, the energy gaps of triple-coupling HBC oligomers are smaller and decrease more significantly than that of the single-coupling ones. We hypothesize that the triple coupling promotes a more effective delocalization of π-electrons than the single coupling, according to density functional theory calculations. We also demonstrate that the HBC oligomers can further extend across the substrate steps to achieve conjugated polymers and large-area porous carbon networks.

Synthesis and Characterization of peri-Heptacene on a Metallic Surface

The synthesis of long n-peri-acenes (n-PAs) is challenging as a result of their inherent open-shell radical character, which arises from the presence of parallel zigzag edges beyond a certain n value. They are considered as π-electron model systems to study magnetism in graphene nanostructures; being potential candidates in the fabrication of optoelectronic and spintronic devices. Here, we report the on-surface formation of the largest pristine member of the n-PA family, i.e. peri-heptacene (n=7, 7-PA), obtained on an Au(111) substrate under ultra-high vacuum conditions. Our high-resolution scanning tunneling microscopy investigations, complemented by theoretical simulations, provide insight into the chemical structure of this previously elusive compound. In addition, scanning tunneling spectroscopy reveals the antiferromagnetic open-shell singlet ground state of 7-PA, exhibiting singlet-triplet spin-flip inelastic excitations with an effective exchange coupling (J_eff ) of 49 meV.

Synthesis of oligoacenes using precursors for evaluation of their electronic structures

Acenes, which are hydrocarbons comprising linearly fused benzene rings, have attracted considerable attention owing to their electronic structures and utility as organic electronic materials. However, the ease with which oligoacenes undergo oxidation increases with the number of linearly fused benzene rings owing to the increased energy of the highest occupied molecular orbital. The synthesis of naked oligoacenes with seven or more benzene rings is difficult because their open-shell structure renders them unstable. The recent development of a precursor method has enabled the in situ synthesis of oligoacenes under specific conditions and the spectroscopic observation of oligoacene in single crystals, in film matrices and under cryogenic conditions. Scanning tunneling microscopy and non-contact atomic force microscopy under ultra-high vacuum conditions have also made significant advances in the study of oligoacenes and oligoazaacenes. This paper reviews the recent progress in the synthesis of oligoacenes using precursors, with a particular focus on the chemical structures, synthesis, and reactivity of the precursors. The electronic properties of oligoacenes are also discussed in relation to the number of fused benzene rings, including their energy levels and spin states. These results will contribute to the synthesis and development of carbon nanomaterials with applications in the field of organic electronics.

Pushing the Length Limit of Dihydrodiboraacenes: Synthesis and Characterizations of Boron-Embedded Heptacene and Nonacene

Boron-embedded heteroacenes (boraacenes) have attracted enormous interest in organic chemistry and materials science. However, extending the skeleton of boraacenes to higher acenes (N≥6) is synthetically challenging because of their limited stability under ambient conditions. Herein, we report the synthesis of boron-embedded heptacene (DBH) and nonacene (DBN) as the hitherto longest boraacenes. The former is highly stable (even after 240 h in tetrahydrofuran), while the latter is air-sensitive with the half-life (t_1/2 ) of 11.8 min. The structures of both compounds are verified by single-crystal X-ray diffraction, revealing a linear backbone with an antiaromatic C₄ B₂ core. Photophysical characterizations associated with theoretical calculations indicate that both compounds exhibit highly efficient anti-Kasha emissions. Remarkably, the air-stable DBH manifests an ultrahigh photoluminescence quantum yield (PLQY) of 98±2 % and can be chemically reduced to its radical anion and dianion states, implying the value of boron-doped higher acenes as novel functional materials.

Tandem Desulfurization/C-C Coupling Reaction of Tetrathienylbenzenes on Cu(111): Synthesis of Pentacene and an Exotic Ladder Polymer

Surface-confined reactions represent a powerful approach for the precise synthesis of low-dimensional organic materials. A complete understanding of the pathways of surface reactions would enable the rational synthesis of a wide range of molecules and polymers. Here, we report different reaction pathways of tetrathienylbenzene (T1TB) and its extended congener tetrakis(dithienyl)benzene (T2TB) on Cu(111), investigated using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. Both T1TB and T2TB undergo desulfurization when deposited on Cu(111) at room temperature. Deposition of T1TB at 453 K yields pentacene through desulfurization, hydrogen transfer, and a cascade of intramolecular cyclization. In contrast, for T2TB the intramolecular cyclization stops at anthracene and the following intermolecular C-C coupling produces a conjugated ladder polymer. We show that tandem desulfurization/C-C coupling provides a versatile approach for growing carbon-based nanostructures on metal surfaces.

Hexacene on Cu(110) and Ag(110): Influence of the Substrate on Molecular Orientation and Interfacial Charge Transfer

Hexacene, composed of six linearly fused benzene rings, is an organic semiconductor material with superior electronic properties. The fundamental understanding of the electronic and chemical properties is prerequisite to any possible application in devices. We investigate the orientation and interface properties of highly ordered hexacene monolayers on Ag(110) and Cu(110) with X-ray photoemission spectroscopy (XPS), photoemission orbital tomography (POT), X-ray absorption spectroscopy (XAS), low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and density functional theory (DFT). We find pronounced differences in the structural arrangement of the molecules and the electronic properties at the metal/organic interfaces for the two substrates. While on Cu(110) the molecules adsorb with their long molecular axis parallel to the high symmetry substrate direction, on Ag(110), hexacene adsorbs in an azimuthally slightly rotated geometry with respect to the metal rows of the substrate. In both cases, molecular planes are oriented parallel to the substrate. A pronounced charge transfer from both substrates to different molecular states affects the effective charge of different C atoms of the molecule. Through analysis of experimental and theoretical data, we found out that on Ag(110) the LUMO of the molecule is occupied through charge transfer from the metal, whereas on Cu(110) even the LUMO+1 receives a charge. Interface dipoles are determined to a large extent by the push-back effect, which are also found to differ significantly between 6A/Ag(110) and 6A/Cu(110).

Stereoisomer-dependent conversion of dinaphthothienothiophene precursor films

Soluble precursor materials of organic semiconductors are employed for fabricating solution-processable thin film devices. While the so-called precursor approach has already been tried for various organic electronic devices such as transistors and solar cells, understanding of the conversion process in the film lags far behind. Here, we report that molecular aggregation of the precursor compound significantly influences the thermal conversion reaction in the film. For this study, two stereoisomers of a dinaphthothienothiophene (DNTT) precursor that are the endo- and exo-DNTT-phenylmaleimide monoadducts are focused on. The structural change during the thermal conversion process has been investigated by a combination of infrared spectroscopy and X-ray diffraction techniques. The results show that the endo-isomer is readily converted to DNTT in the film by heating, whereas the exo-isomer exhibits no reaction at all. This reaction suppression is found to be due to the self-aggregation property of the exo-isomer accompanying the intermolecular C–H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\cdots$$\end{document}⋯O interactions. This finding shows a new direction of controlling the on-surface reaction, as well as the importance of analyzing the film structure at the initial stage of the reaction.

On-surface synthesis and characterization of nitrogen-substituted undecacenes

Heteroatom substitution in acenes allows tailoring of their remarkable electronic properties, expected to include spin-polarization and magnetism for larger members of the acene family. Here, we present a strategy for the on-surface synthesis of three undecacene analogs substituted with four nitrogen atoms on an Au(111) substrate, by employing specifically designed diethano-bridged precursors. A similarly designed precursor is used to synthesize the pristine undecacene molecule. By comparing experimental features of scanning probe microscopy with ab initio simulations, we demonstrate that the ground state of the synthesized tetraazaundecacene has considerable open-shell character on Au(111). Additionally, we demonstrate that the electronegative nitrogen atoms induce a considerable shift in energy level alignment compared to the pristine undecacene, and that the introduction of hydro-aza groups causes local anti-aromaticity in the synthesized compounds. Our work provides access to the precise fabrication of nitrogen-substituted acenes and their analogs, potential building-blocks of organic electronics and spintronics, and a rich playground to explore π-electron correlation.

Defect-Induced π-Magnetism into Non-Benzenoid Nanographenes

The synthesis of nanographenes (NGs) with open-shell ground states have recently attained increasing attention in view of their interesting physicochemical properties and great prospects in manifold applications as suitable materials within the rising field of carbon-based magnetism. A potential route to induce magnetism in NGs is the introduction of structural defects, for instance non-benzenoid rings, in their honeycomb lattice. Here, we report the on-surface synthesis of three open-shell non-benzenoid NGs (A1, A2 and A3) on the Au(111) surface. A1 and A2 contain two five- and one seven-membered rings within their benzenoid backbone, while A3 incorporates one five-membered ring. Their structures and electronic properties have been investigated by means of scanning tunneling microscopy, noncontact atomic force microscopy and scanning tunneling spectroscopy complemented with theoretical calculations. Our results provide access to open-shell NGs with a combination of non-benzenoid topologies previously precluded by conventional synthetic procedures.

Preparative-scale synthesis of nonacene

During the last years we have witnessed progressive evolution of preparation of acenes with length up to dodecacene by on-surface synthesis in ultra-high vacuum or generation of acenes up to decacene in solid matrices at low temperatures. While these protocols with very specific conditions produce the acenes in amount of few molecules, the strategies leading to the acenes in large quantities dawdle behind. Only recently and after 70 years of synthetic attempts, heptacene has been prepared in bulk phase. However, the preparative scale synthesis of higher homologues still remains a formidable challenge. Here we report the preparation and characterisation of nonacene and show its excellent thermal and in-time stability.

Acenes, or linearly fused benzene rings, have both fundamental scientific interest and potential for electronic and material utility, but synthesis of acenes with more than six rings are difficult due to dimerization and degradation. Here the authors prepare nonacene and demonstrate that it is stable in inert conditions.

Light assisted synthesis of poly-para-phenylene on Ag(001)

A detailed study of poly-para-phenylene (PPP) obtained by light-assisted on-surface-synthesis (OSS) on Ag(100) was carried out by scanning tunneling microscopy and spectroscopy together with density functional theory calculations. The use of light in combination with heat allows to lower by 50 K annealing temperature the each stage of the Ullmann coupling. Debromination of the 4,4″ dibromo-p-terphenyl precursors was thus realized at 300 K, the formation of the first oligomers from the organometallic intermediate by silver bridging atom release at 423 K and PPP by complete elimination of the silver at 473 K. This approach to lower the reaction temperature permits to enhance the Ag(100) surface reactivity to become comparable to that of Cu(111). The underlying mechanism of light effect was proposed to occur via surface mediated excitation, with the creation of photoexcited electrons known as hot electrons correlated with surface plasmon excitation. This original pathway combining both light and heat provides an additional parameter to control OSS by separating the precursor activation stage from the diffusion.

On-Surface Synthesis and Characterization of Super-nonazethrene

Beginning with the early work of Clar et al. in 1955, zethrenes and their laterally extended homologues, super-zethrenes, have been intensively studied in the solution phase and widely investigated as optical and charge transport materials. Superzethrenes are also considered to exhibit an open-shell ground state and may thus serve as model compounds to investigate nanoscale π-magnetism. However, their synthesis is extremely challenging due to their high reactivity. We report here the on-surface synthesis of the hitherto largest zethrene homologue-super-nonazethrene-on Au(111). Using single-molecule scanning tunneling microscopy and spectroscopy, we show that super-nonazethrene exhibits an open-shell singlet ground state featuring a large spin polarization-driven electronic gap of 1 eV. Consistent with the emergence of an open-shell ground state, high-resolution tunneling spectroscopy reveals singlet-triplet spin excitations in super-nonazethrene, characterized by a strong intramolecular magnetic exchange coupling of 51 meV. Given the paucity of zethrene chemistry on surfaces, our results therefore provide unprecedented access to large, open-shell zethrene compounds amenable to scanning probe measurements, with potential application in molecular spintronics.

Efficient photogeneration of nonacene on nanostructured graphene

The on-surface photogeneration of nonacene from α-bisdiketone precursors deposited on nanostructured epitaxial graphene grown on Ru(0001) has been studied by means of low temperature scanning tunneling microscopy and spectroscopy. The presence of an unoccupied surface state, spatially localized in the regions where the precursors are adsorbed, and energetically accessible in the region of the electromagnetic spectrum where n-π* transitions take place, allows for a 100% conversion of the precursors into nonacenes. With the help of state-of-the-art theoretical calculations, we show that such a high yield is due to the effective population of the surface state by the incoming light and the ensuing electron transfer to the unoccupied states of the precursors through an inelastic scattering mechanism. Our findings are the experimental confirmation that surface states can play a prominent role in the surface photochemistry of complex molecular systems, in accordance with early theoretical predictions made on small molecules.

Benchmarking atomically defined AFM tips for chemical-selective imaging

Controlling the identity of the tip-terminating atom or molecule in low-temperature atomic force microscopy has led to ground breaking progress in surface chemistry and nanotechnology. Lacking a comparative tip-performance assessment, a profound standardization in such experiments is highly desirable. Here we directly compare the imaging and force-spectroscopy capabilities of four atomically defined tips, namely Cu-, Xe-, CO-, and O-terminated Cu-tips (CuOx-tips). Using a nanostructured copper-oxide surface as benchmark system, we found that Cu-tips react with surface oxygen, while chemically inert Xe- and CO-tips allow entering the repulsive force regime enabling increased resolution. However, their high flexibility leads to imaging artifacts and their strong passivation suppresses the chemical contrast. The higher rigidity and selectively increased chemical reactivity of CuOx-tips prevent tip-bending artifacts and generate a distinct chemical contrast. This result is particularly promising in view of future studies on other metal-oxide surfaces.

Acene-Linked Zethrenes and Bisphenalenyls: A DFT Search for Organic Tetraradicals

Polycyclic aromatic hydrocarbons are of special interest due to their promising nonlinear optical and magnetic properties. A series of acene-linked zethrenes and bisphenalenyls comprising from five to nine benzene rings in the linker group have been computationally studied by the DFT UB3LYP/6-311++G(d,p) quantum-chemical modeling of their electronic structure, possible spin states, and exchange interactions. The zethrenes with octacene and nonacene linkers as well as bisphenalenyls comprising heptacene, octacene, and nonacene linker groups have been revealed to possess tetraradicaloid nature, which makes them promising building blocks for organic optoelectronic and spintronic devices. The results obtained open a way of constructing tetraradicaloid organic molecules characterized by the presence of two types of paramagnetic centers.

Persistent peri-Heptacene: Synthesis and In Situ Characterization

n‐peri‐Acenes (n‐PAs) have gained interest as model systems of zigzag‐edged graphene nanoribbons for potential applications in nanoelectronics and spintronics. However, the synthesis of n‐PAs larger than peri‐tetracene remains challenging because of their intrinsic open‐shell character and high reactivity. Presented here is the synthesis of a hitherto unknown n‐PA, that is, peri‐heptacene (7‐PA), in which the reactive zigzag edges are kinetically protected with eight 4‐tBu‐C₆H₄ groups. The formation of 7‐PA is validated by high‐resolution mass spectrometry and in situ FT‐Raman spectroscopy. 7‐PA displays a narrow optical energy gap of 1.01 eV and exhibits persistent stability (t_1/2≈25 min) under inert conditions. Moreover, electron‐spin resonance measurements and theoretical studies reveal that 7‐PA exhibits an open‐shell feature and a significant tetraradical character. This strategy could be considered a modular approach for the construction of next‐generation (3 N+1)‐PAs (where N≥3).

Synthesis of the [11]Cyclacene Framework by Repetitive Diels-Alder Cycloadditions

The Diels–Alder cycloaddition between bisdienes and bisdienophile incorporating the 7-oxa-bicyclo[2.2.1]heptane unit are well known to show high diastereoselectivity that can be exploited for the synthesis of molecular belts. The related bisdiene 5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octene is a valuable building block for the synthesis of photoprecursors for acenes, but it has not been employed for the synthesis of molecular belts. The present work investigates by computational means the Diels–Alder reaction between these bisdiene building blocks with syn-1,4,5,8-tetrahydro-1,4:5,8-diepoxyanthracene, which shows that the diastereoselectivity of the Diels–Alder reaction of the etheno-bridged bisdiene is lower than that of the epoxy-bridged bisdiene. The reaction of the etheno-bridged bisdiene and syn-1,4,5,8-tetrahydro-1,4:5,8-diepoxyanthracene in 2:1 ratio yields two diastereomers that differ in the orientation of the oxa and etheno bridges based on NMR and X-ray crystallography. The all-syn diastereomer can be transformed into a molecular belt by inter- and intramolecular Diels–Alder reactions with a bifunctional building block. The molecular belt could function as a synthetic intermediate en route to a [11]cyclacene photoprecursor.

Pushing the Limits of Acene Chemistry: The Recent Surge of Large Acenes

Acenes, consisting of linearly fused benzene rings, are an important fundamental class of organic compounds with various applications. Hexacene is the largest acene that was synthesized and isolated in the 20th century. The next largest member of the acene family, heptacene, was observed in 2007 and since then significant progress in preparing acenes has been reported. Significantly larger acenes, up to undecacene, could be studied by means of low-temperature matrix isolation spectroscopy with in situ photolytic generation, and up to dodecacene by means of on-surface synthesis employing innovative precursors and highly defined crystalline metal surfaces under ultrahigh vacuum conditions. The review summarizes recent experimental and theoretical advances in the area of acenes that give a significantly deeper insight into the fundamental properties and nature of the electronic structure of this fascinating class of organic compounds.

Single-Molecule Conductance of 1,4-Azaborine Derivatives as Models of BN-doped PAHs

The single-molecule conductance of a series of BN-acene-like derivatives has been measured by using scanning tunneling break-junction techniques. A strategic design of the target molecules has allowed us to include azaborine units in positions that unambiguously ensure electron transport through both heteroatoms, which is relevant for the development of customized BN-doped nanographenes. We show that the conductance of the anthracene azaborine derivative is comparable to that of the pristine all-carbon anthracene compound. Notably, this heteroatom substitution has also allowed us to perform similar measurements on the corresponding pentacene-like compound, which is found to have a similar conductance, thus evidencing that B-N doping could also be used to stabilize and characterize larger acenes for molecular electronics applications. Our conclusions are supported by state-of-the-art transport calculations.

Going beyond Pentacene: Photoemission Tomography of a Heptacene Monolayer on Ag(110)

Longer acenes such as heptacene are promising candidates for optoelectronic applications but are unstable in their bulk structure as they tend to dimerize. This makes the growth of well-defined monolayers and films problematic. In this article, we report the successful preparation of a highly oriented monolayer of heptacene on Ag(110) by thermal cycloreversion of diheptacenes. In a combined effort of angle-resolved photoemission spectroscopy and density functional theory (DFT) calculations, we characterize the electronic and structural properties of the molecule on the surface in detail. Our investigations allow us to unambiguously confirm the successful fabrication of a highly oriented complete monolayer of heptacene and to describe its electronic structure. By comparing experimental momentum maps of photoemission from frontier orbitals of heptacene and pentacene, we shed light on differences between these two acenes regarding their molecular orientation and energy-level alignment on the metal surfaces.

On-Surface Synthesis and Intermolecular Cycloadditions of Indacenoditetracenes, Antiaromatic Analogues of Undecacene

The formation of s-indaceno[1,2-b:5,6-b']ditetracene and as-indaceno[2,3-b:6,7-b']ditetracene containing indenofluorene cores from a common precursor has been achieved by a dehydrogenative surface-assisted cyclization on Au(111) and confirmed by bond-resolved non-contact atomic force microscopy. On-surface generated as-indaceno[2,3-b:6,7-b']ditetracenes undergo fusion, which leads to T-shaped adducts by an intermolecular cycloaddition. The same type of cycloaddition, which has no parallel in solution chemistry, has been observed between as-indaceno[2,3-b:6,7-b']ditetracene and pentacene or octacene. These examples of surface-assisted cycloaddition provide perspectives for the rational design and synthesis of molecular nanostructures.

On-surface synthesis of graphene nanostructures with π-magnetism

Graphene nanostructures (GNs) including graphene nanoribbons and nanoflakes have attracted tremendous interest in the field of chemistry and materials science due to their fascinating electronic, optical and magnetic properties. Among them, zigzag-edged GNs (ZGNs) with precisely-tunable π-magnetism hold great potential for applications in spintronics and quantum devices. To improve the stability and processability of ZGNs, substitutional groups are often introduced to protect the reactive edges in organic synthesis, which renders the study of their intrinsic properties difficult. In contrast to the conventional wet-chemistry method, on-surface bottom-up synthesis presents a promising approach for the fabrication of both unsubstituted ZGNs and functionalized ZGNs with atomic precision via surface-catalyzed transformation of rationally-designed precursors. The structural and spin-polarized electronic properties of these ZGNs can then be characterized with sub-molecular resolution by means of scanning probe microscopy techniques. This review aims to highlight recent advances in the on-surface synthesis and characterization of a diversity of ZGNs with π-magnetism. We also discuss the important role of precursor design and reaction stimuli in the on-surface synthesis of ZGNs and their π-magnetism origin. Finally, we will highlight the existing challenges and future perspective surrounding the synthesis of novel open-shell ZGNs towards next-generation quantum technology.

Unravelling the Open-Shell Character of Peripentacene on Au(111)

Polycyclic aromatic hydrocarbons (PAHs) are a family of organic compounds comprising two or more fused aromatic rings which feature manifold applications in modern technology. Among these species, those presenting an open-shell magnetic ground state are of particular interest for organic electronic, spintronic, and non-linear optics and energy storage devices. Within PAHs, special attention has been devoted in recent years to the synthesis and study of the acene and fused acene (periacene) families, steered by their decreasing HOMO-LUMO gap with length and predicted open-shell character above some size. However, an experimental fingerprint of such magnetic ground state has remained elusive. Here, we report on the in-depth electronic characterization of isolated peripentacene molecules on a Au(111) surface. Scanning tunnelling spectroscopy, complemented by computational investigations, reveals an antiferromagnetic singlet ground state, characterized by singlet-triplet inelastic excitations with an experimental effective exchange coupling (J_eff) of 40.5 meV. Our results deepen the fundamental understanding of organic compounds with magnetic ground states, featuring perspectives in carbon-based spintronic devices.

Unusual reversibility in molecular break-up of PAHs: the case of pentacene dehydrogenation on Ir(111)

In this work, we characterise the adsorption of pentacene molecules on Ir(111) and their dissociation behaviour as a function of temperature.