Upcycling waste plastics into carbon nanomaterials: A review

Simultaneous Material and Chemical Recycling of Waste PET/PE Multi-Layer Films under Hydrothermal Conditions

Multi-layer plastic films are widely used in various fields especially for packaging, but due to complex composition, it is very difficult to recover single-material polymers or high-purity monomers from them after usage. In this study, we proposed a hydrothermal process for recycling PET/PE (PET: Polyethylene terephthalate; PE: Polyethylene) films. PET can be hydrolyzed to monomers of terephthalic acid (TPA) and ethylene glycol (EG). Using a hydrothermal system equipped with two filters, PE, TPA, and EG were collected separately, indicating the simultaneous material and chemical recycling of PET/PE films was firstly achieved. At 300 °C and 10 MPa for 60 min, PET conversion reached around 100 %, and TPA yield of 83.0 % was obtained with a high TPA purity of 96.1 %. In addition, the effect of the holding time on PET conversion, TPA yield, EG yield, and TPA purity was studied. This research opened up a new and sustainable pathway to recycle multi-layer plastic films in both lab and industry.

Reversible Sensing Technologies Using Upcycled TPEE: Crafting pH and Light Responsive Materials towards Sustainable Monitoring

Multiresponsive materials with reversible and durable characteristics are indispensable because of their promising applications in environmental change detections. To fabricate multiresponsive materials in mass production, however, complex reactions and impractical situations are often involved. Herein, a dual responsive (light and pH) spiropyran-based smart sensor fabricated by a simple layer-by-layer (LbL) assembly process from upcycled thermoplastic polyester elastomer (TPEE) materials derived from recycled polyethylene terephthalate (r-PET) is proposed. Positively charged chitosan solutions and negatively charged merocyanine-COOH (MC-COOH) solutions are employed in the LbL assembly technique, forming the chitosan-spiropyran deposited TPEE (TPEE-CH-SP) film. Upon UV irradiation, the spiropyran-COOH (SP-COOH) molecules on the TPEE-CH-SP film undergo the ring-opening isomerization, along with an apparent color change from colorless to purple, to transform into the MC-COOH molecules. By further exposing the TPEE-CH-MC film to hydrogen chloride (HCl) and nitric acid (HNO3) vapors, the MC-COOH molecules can be transformed into protonated merocyanine-COOH (MCH-COOH) with the simultaneous color change from purple to yellow.

Recent advances in liquid fuel production from plastic waste via pyrolysis: Emphasis on polyolefins and polystyrene

The management of plastic waste (PW) has become an indispensable worldwide issue because of the enhanced accumulation and environmental impacts of these waste materials. Thermo-catalytic pyrolysis has been proposed as an emerging technology for the valorization of PW into value-added liquid fuels. This review provides a comprehensive investigation of the latest advances in thermo-catalytic pyrolysis of PW for liquid fuel generation, by emphasizing polyethylene, polypropylene, and polystyrene. To this end, the current strategies of PW management are summarized. The various parameters affecting the thermal pyrolysis of PW (e.g., temperature, residence time, heating rate, pyrolysis medium, and plastic type) are discussed, highlighting their significant influence on feed reactivity, product yield, and carbon number distribution of the pyrolysis process. Optimizing these parameters in the pyrolysis process can ensure highly efficient energy recovery from PW. In comparison with non-catalytic PW pyrolysis, catalytic pyrolysis of PW is considered by discussing mechanisms, reaction pathways, and the performance of various catalysts. It is established that the introduction of either acid or base catalysts shifts PW pyrolysis from the conventional free radical mechanism towards the carbonium ion mechanism, altering its kinetics and pathways. This review also provides an overview of PW pyrolysis practicality for scaling up by describing techno-economic challenges and opportunities, environmental considerations, and presenting future outlooks in this field. Overall, via investigation of the recent research findings, this paper offers valuable insights into the potential of thermo-catalytic pyrolysis as an emerging strategy for PW management and the production of liquid fuels, while also highlighting avenues for further exploration and development.

Recent advances in nanotechnology-based modifications of micro/nano PET plastics for green energy applications

Poly(ethylene terephthalate) (PET) plastic is an omnipresent synthetic polymer in our lives, which causes negative impacts on the ecosystem. It is crucial to take mandatory action to control the usage and sustainable disposal of PET plastics. Recycling plastics using nanotechnology offers potential solutions to the challenges associated with traditional plastic recycling methods. Nano-based degradation techniques improve the degradation process through the influence of catalysts. It also plays a crucial role in enhancing the efficiency and effectiveness of recycling processes and modifying them into value-added products. The modified PET waste plastics can be utilized to manufacture batteries, supercapacitors, sensors, and so on. The waste PET modification methods have massive potential for research, which can play major role in removing post-consumer plastic waste. The present review discusses the effects of micro/nano plastics in terrestrial and marine ecosystems and its impacts on plants and animals. Briefly, the degradation and bio-degradation methods in recent research were explored. The depolymerization methods used for the production of monomers from PET waste plastics were discussed in detail. Carbon nanotubes, fullerene, and graphene nanosheets synthesized from PET waste plastics were delineated. The reuse of nanotechnologically modified PET waste plastics for potential green energy storage products, such as batteries, supercapacitors, and sensors were presented in this review.

Sustainability, performance, and production perspectives of waste-derived functional carbon nanomaterials towards a sustainable environment: A review

The survival of humanity is severely threatened by the massive accumulation of waste in the ecosystem. One plausible solution for the management and upcycling of waste is conversing waste at the molecular level and deriving carbon-based nanomaterial. The field of carbon nanomaterials with distinctive properties, such as exceptionally large surface areas, good thermal and chemical stability, and improved propagation of charge carriers, remains a significant area of research. The study demonstrates recent developments in high-value carbon-based photocatalysts synthesis from various waste precursors, including zoonotic, phytogenic, polyolefinic, electronic, and biomedical, highlighting the progression as photocatalysts and adsorbents for wastewater treatment and water splitting applications. This review highpoints the benefits of using waste as a precursor to support sustainability and circular economy and the risks associated with their use. Finally, we support that a sustainable society will eventually be realized by exploring present obstacles and potential steps for creating superior carbon-based nanomaterials in the future.

Exploring antimicrobial and biocompatible applications of eco-friendly fluorescent carbon dots derived from fast-food packaging waste transformation

In the face of escalating environmental concerns, particularly the pervasive issue of non-biodegradable fast-food packaging waste, this study introduces a ground-breaking solution that not only addresses waste management but also advances biomedical technology. Utilizing the underexploited resource of Fucoidan, a sulfated polysaccharide from brown algae, we have innovatively transformed fast-food packaging waste into eco-friendly fluorescent carbon dots (FPCDs). These FPCDs were meticulously characterized through advanced techniques like FT-IR, TEM, and XRD, shedding light on their unique structure, morphology, and composition. A significant discovery of this study is the potent antimicrobial properties of these FPCDs, which demonstrate remarkable effectiveness against specific bacterial and fungal strains. This opens new avenues in the realm of biomedical applications, including imaging, drug delivery, and biosensing. Furthermore, extensive toxicity assessments, including the Brine shrimp lethality assay and Adult Artemia toxicity tests, underscore the safety of these nanoparticles, bolstering their applicability in sensitive medical scenarios. Our research presents a compelling dual approach, ingeniously tackling environmental sustainability issues by repurposing waste while simultaneously creating valuable materials for biomedical use. This dual benefit underscores the transformative potential of our approach, setting a precedent in both waste management and medical innovation.

Catalytic pyrolysis of harmful plastic waste to alleviate environmental impacts

Wax is a detrimental byproduct of plastic waste pyrolysis causing challenges upon its release into the environment owing to persistence and potential toxicity. In this study, the valorization of wax materials through conversion into BTEX (i.e., benzene, toluene, ethylbenzene, and xylene) was achieved via catalytic pyrolysis using zeolite-based catalysts. The potential of two types of waxes, spent wax (SW), derived from the pyrolysis of plastic waste, and commercial paraffin wax (PW), for BTEX generation, was investigated. Using HZSM-5, higher yields of oil (54.9 wt%) and BTEX (18.2 wt%) were produced from the pyrolysis of SW compared to PW (32.3 and 14.1 wt%, respectively). This is due to the improved accessibility of lighter hydrocarbons in SW to Brønsted and Lewis acid sites in HZSM-5 micropores, promoting cracking, isomerization, cyclization, Diels-Alder, and dehydrogenation reactions. Further, the use of HZSM-5 resulted in significantly larger yields of oil and BTEX from SW pyrolysis compared to Hbeta and HY. This phenomenon is ascribed to the well-balanced distribution of Brønsted and Lewis acid sites and the identical geometric structure of HZSM-5 micropores and BTEX molecules. The addition of Ga to HZSM-5 further led to 2.24% and 28.30% enhancements in oil and BTEX yields, respectively, by adjusting the acidity of the catalyst through the introduction of new Lewis acid sites. The regeneration of the Ga/HZSM-5 catalyst by removing deposited coke on the spent catalyst under air partially recovered catalytic activity. This study not only offers an efficient transformation of undesirable wax into valuable fuels but also provides an environmentally promising solution, mitigating pollution, contributing to carbon capture, and promoting a healthier and more sustainable environment. It also suggests future research directions, including catalyst optimization and deactivation management, feedstock variability exploration, and techno-economic analyses for sustainable wax conversion into BTEX via catalytic pyrolysis.

Mitigating microplastic pollution: A critical review on the effects, remediation, and utilization strategies of microplastics

Microplastics are found ubiquitous in the natural environment and are an increasing source of worry for global health. Rapid industrialization and inappropriate plastic waste management in our daily lives have resulted in an increase in the amount of microplastics in the ecosystem. Microplastics that are <150 μm in size could be easily ingested by living beings and cause considerable toxicity. Microplastics can aggregate in living organisms and cause acute, chronic, carcinogenic, developmental, and genotoxic damage. As a result, a sustainable approach to reducing, reusing, and recycling plastic waste is required to manage microplastic pollution in the environment. However, there is still a significant lack of effective methods for managing these pollutants. As a result, the purpose of this review is to convey information on microplastic toxicity and management practices that may aid in the reduction of microplastic pollution. This review further insights on how plastic trash could be converted as value-added products, reducing the load of accumulating plastic wastes in the environment, and leading to a beneficial endeavor for humanity.

Recent advancements in the use of plastics as a carbon source for carbon nanotubes synthesis - A review

Plastics, which majorly consist of polypropylene (PP), polyethylene (linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE) and high-density polyethylene (HDPE)), polystyrene (PS), polyvinyl chloride (PVC), polyethylene terephthalate (PET), etc., are the most abundant municipal solid wastes (MSW). They have been utilized as a cheap carbon feedstock in the synthesis of carbon nanotubes (CNTs) because of their high hydrocarbon content, mainly carbon and hydrogen, especially for the polyolefins. In this review, the detailed progress made so far in the use of plastics (both waste and virgin) as cheap carbon feedstock in the synthesis of CNTs (only) over the years is studied. The primary aim of this work is to provide an expansive landscape made so far, especially in the areas of catalysts, catalyst supports, and the methods employed in their preparations and other operational growth conditions, as well as already explored applications of plastic-derived CNTs. This is to enable researchers to easily access, understand, and summarise previous works done in this area, forging ahead towards improving the yield and quality of plastic-derived CNTs, which could extend their market and use in other purity-sensitive applications.

Chemical recycling of plastic wastes with alkaline earth metal oxides: A review

Plastics have been widely used in daily life and industries due to their low cost and high durability, leading to huge production of plastics and tens of millions of plastic wastes every year. Chemical recycling can recycle contaminated and degraded plastics (that mechanical recycling cannot deal with) to obtain value-added products, which potentially solves the environmental problems caused by plastics and realizes a circular economy. Alkaline earth metal oxides, as a category of cost-effective and multi-functional materials, have been widely used in chemical recycling of common plastics, acting as three roles: catalyst, template, and absorbent. Among five commercial plastics, polyethylene terephthalate is suitable for pyrolysis and solvolysis. Polyethylene and polypropylene, which are ideal precursors for synthesis of carbon nanotubes, could be combined with biomass for co-pyrolysis. Polyvinyl chloride needs to be pretreated to reduce chloride content prior to pyrolysis. Depolymerization of polystyrene into monomers is attractive. This review summarized the chemical recycling approaches of commercial plastics and the strategies with alkaline earth metal oxides for the development of efficient recycling processes. It will aid understanding of the advances and challenges in the field and promote the future research.

Histamine Recognition by Carbon Dots from Plastic Waste and Development of Cellular Imaging: Experimental and Theoretical Studies

The present work highlights the sustainable approach for the transformation of plastic waste into fluorescent carbon dots (CDs) through carbonization and then they were functionalized with L-cysteine and o-phenylenediamine. CDs which were characterized by different analytical techniques such as X-ray diffraction (XRD), thermogravimetric analysis (TGA), Scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are employed to recognize Cu2+, Fe2+, and Hg2+ ions. The results show that the fluorescence emission was considerably quenched, and it is consistent with the interference and Jobs plots. The detection limit was found to be 0.35µM for Cu(II), 1.38 µM for Hg(II), and 0.51µM Fe(III). The interaction of CDs with metal ions enhances the fluorescence intensity detecting histamine successfully. It shows that plastic waste-based CDs can be applied clinically to detect toxic metals and biomolecules. Moreover, the system was employed to develop the cellular images using Saccharomyces cerevisiae cells with the support of a confocal microscope. Furthermore, theoretical studies were performed for the naphthalene layer (AR) as a model for C-dots, then optimized its structure and analyzed by using the molecular orbital. The obtained TD-DFT spectra coincided with experimental spectra for CDs/M2+/histamine systems.

Upcycling of surgical facemasks into carbon based thin film electrode for supercapacitor technology

Polypropylene (PP), a commonly used plastic, is used for making the outer layers of a surgical face mask. In 2020, around 3 billion surgical face masks were disposed into the environment, causing a huge threat to wildlife, aquatic life, and ecosystems. In this work, we have reported the sulfonation technique for stabilizing the surgical face masks and their conversion into carbon nanoparticles for application as a supercapacitor electrode. The electrode is fabricated by preparing a slurry paste of carbon nanoparticles and pasting it on a conductive wearable fabric. To investigate the performance of the carbon thin film electrode, electrochemical techniques are employed. The Cyclic Voltammetry (CV) analysis performed at different scan rates in a 6 molar KOH electrolyte reveals that the carbon thin film acts as a positive electrode. At 4 A g^-1, the electrode shows a specific capacitance of 366.22 F g^-1 and 100% retention of specific capacitance for 8000 cycles. A two-electrode asymmetric device is fabricated using carbon thin film as the positive electrode, NiO thin film as the negative electrode, and a KOH separator between two electrodes. The device shows a specific capacitance of 113.73 F g^-1 at 1.3 A g^-1 and glows a red LED for 6 min. This work is a step towards upcycling the waste produced from surgical face masks used during the COVID-19 pandemic and its application for energy storage.

Porous carbon tubes from recycling waste COVID-19 masks for optimization of 8 mol% Y2O3-doped tetragonal zirconia polycrystalline nanopowder

Disposable polypropylene medical masks are widely used to protect people from injury caused by COVID-19 worldwide. However, disposable medical masks are non-biodegradable materials, and the accumulation of waste masks can pollute the environment and waste resources without a reasonable recycling method. The aims of this study are to transform waste masks into carbon materials and to use them as a dispersant in preparing high-quality 8 mol% Y₂O₃-doped tetragonal zirconia nanopowders. The waste masks were carbonized to get a carbon source in the first step, then KOH was used to etch the carbon source creating a micropores structure in the carbon material after the carbon-bed heat treatment method. The resulting carbon material is a porous tube structure with a high specific surface area (1220.34 m²/g) and adsorption capacity. The as-obtained porous carbon tubes were applied as a dispersant to produce 8 mol% Y₂O₃-doped tetragonal zirconia nanopowders, and the resulting nanopowders owned well-dispersed and had the smallest particle size than that prepared by activated carbon as a dispersant. Besides, the sintered 8 mol% Y₂O₃-doped tetragonal zirconia ceramic possessed high density, which resulted in higher ionic conductivity. These findings suggest that waste face masks can be recycled to prepare high-added-value carbon materials and provide a green and low-cost method to reuse polypropylene waste materials.

Advanced and Smart Textiles during and after the COVID-19 Pandemic: Issues, Challenges, and Innovations

The COVID-19 pandemic has hugely affected the textile and apparel industry. Besides the negative impact due to supply chain disruptions, drop in demand, liquidity problems, and overstocking, this pandemic was found to be a window of opportunity since it accelerated the ongoing digitalization trends and the use of functional materials in the textile industry. This review paper covers the development of smart and advanced textiles that emerged as a response to the outbreak of SARS-CoV-2. We extensively cover the advancements in developing smart textiles that enable monitoring and sensing through electrospun nanofibers and nanogenerators. Additionally, we focus on improving medical textiles mainly through enhanced antiviral capabilities, which play a crucial role in pandemic prevention, protection, and control. We summarize the challenges that arise from personal protective equipment (PPE) disposal and finally give an overview of new smart textile-based products that emerged in the markets related to the control and spread reduction of SARS-CoV-2.

Upcycling of Waste Plastic into Hybrid Carbon Nanomaterials

Graphitic 1D and hybrid nanomaterials represent a powerful solution in composite and electronic applications due to exceptional properties, but large-scale synthesis of hybrid materials has yet to be realized. Here, a rapid, scalable method to produce graphitic 1D materials from polymers using flash Joule heating (FJH) is reported. This avoids lengthy chemical vapor deposition and uses no solvent or water. The flash 1D materials (F1DM), synthesized using a variety of earth-abundant catalysts, have controllable diameters and morphologies by parameter tuning. Furthermore, the process can be modified to form hybrid materials, with F1DM bonded to turbostratic graphene. In nanocomposites, F1DM outperform commercially available carbon nanotubes. Compared to current 1D material synthetic strategies using life cycle assessment, FJH synthesis represents an 86-92% decrease in cumulative energy demand and 92-94% decrease in global-warming potential. This work suggests that FJH affords a cost-effective and sustainable route to upcycle waste plastic into valuable 1D and hybrid nanomaterials.

Review of polymer technologies for improving the recycling and upcycling efficiency of plastic waste

Human society has become increasingly reliant on plastic because it allows for convenient and sanitary living. However, recycling rates are currently low, which means that the majority of plastic waste ends up in landfills or the ocean. Increasing recycling and upcycling rates is a critical strategy for addressing the issues caused by plastic pollution, but there are several technical limitations to overcome. This article reviews advancements in polymer technology that aim to improve the efficiency of recycling and upcycling plastic waste. In food packaging, natural polymers with excellent gas barrier properties and self-cleaning abilities have been introduced as environmentally friendly alternatives to existing materials and to reduce food-derived contamination. Upcycling and valorization approaches have emerged to transform plastic waste into high-value-added products. Recent advancements in the development of recyclable high-performance plastics include the design of super engineering thermoplastics and engineering chemical bonds of thermosets to make them recyclable and biodegradable. Further research is needed to develop more cost-effective and scalable technologies to address the plastic pollution problem through sustainable recycling and upcycling.

Recent progresses, challenges, and opportunities of carbon-based materials applied in heavy metal polluted soil remediation

The application of carbon-based materials (CBMs) for heavy metal polluted soil remediation has gained growing interest due to their versatile properties and excellent remediation performance. Although the progresses on applications of CBMs in removing heavy metal from aqueous solution and their corresponding mechanisms were well known, comprehensive review on applications of CBMs in heavy metal polluted soil remediation were less identified. Therefore, this review provided insights into advanced progresses on utilization of typical CBMs including biochar, activated carbon, graphene, graphene oxide, carbon nanotubes, and carbon black for heavy metal polluted soil remediation. The mechanisms of CBM remediation of heavy metals in soil were summarized, mainly including physical adsorption, precipitation, complexation, electrostatic interaction, and cationic-π coordination. The key factors affecting the remediation effect include soil pH, organic matter, minerals, microorganisms, coexisting ions, moisture, and material size. Disadvantages of CBMs were also included, such as: potential health risks, high cost, and difficulty in achieving co-passivation of anions and cations. This work will contribute to our understanding of current research advances, challenges, and opportunities for CBMs remediation of heavy metal-contaminated soils.

Synergistic and Antagonistic Effects of the Co-Pyrolysis of Plastics and Corn Stover to Produce Char and Activated Carbon

The physicochemical properties of char and activated carbon produced from the co-pyrolysis of corn stover (CS) and plastics, polystyrene (PS) and polyethylene terephthalate (PET), were studied. Non-isothermal gas analysis of the volatiles was conducted using an online mass spectrometer to correlate the thermal degradation of gaseous byproducts to the formation of pores in the char materials. The findings determined that the addition of PS or PET promotes the formation of the solid char product with either higher than average pore sizes or surface areas compared to control samples. The addition of PET to corn stover increases the surface area of the char formed. The char formed from a CS:PET mass ratio of 1:1 produced char with a surface area of 423.8 ± 24.8 m²/g at 500 °C and a duration of 2 h. The surface area of the chars formed from CS and PET decreased as the amount of PET decreased, showing a tendency for PET to increase the surface area of the char materials synergistically. The addition of PS to corn stover promoted the formation of chars with, on average, larger pore sizes than the control char samples. The chars were chemically activated with potassium hydroxide, and the activated carbon that formed had lower surface areas but comparable surface functional groups to the control samples. Vanillin adsorption testing showed that activated carbon from corn stover performed the best at removing 95% of the vanillin after 2 h. In contrast, the activated carbon from the chars produced from the co-pyrolysis of corn stover and polystyrene or corn stover and polyethylene terephthalate removed 45% and 46% of vanillin after 2 h, respectively. The findings suggest that plastics have a synergistic relationship in producing char precursors with improved porosity but antagonistically affect the activated carbon adsorbent properties.

Assembly strategies for polyethylene-degrading microbial consortia based on the combination of omics tools and the "Plastisphere"

Numerous microorganisms and other invertebrates that are able to degrade polyethylene (PE) have been reported. However, studies on PE biodegradation are still limited due to its extreme stability and the lack of explicit insights into the mechanisms and efficient enzymes involved in its metabolism by microorganisms. In this review, current studies of PE biodegradation, including the fundamental stages, important microorganisms and enzymes, and functional microbial consortia, were examined. Considering the bottlenecks in the construction of PE-degrading consortia, a combination of top-down and bottom-up approaches is proposed to identify the mechanisms and metabolites of PE degradation, related enzymes, and efficient synthetic microbial consortia. In addition, the exploration of the plastisphere based on omics tools is proposed as a future principal research direction for the construction of synthetic microbial consortia for PE degradation. Combining chemical and biological upcycling processes for PE waste could be widely applied in various fields to promote a sustainable environment.

A review on production and application of activated carbon from discarded plastics in the context of 'waste treats waste'

In the post-COVID scenario, the annual increase in plastic waste has taken an upsurge due to the disposal of plastic masks, gloves and other protective equipment. To reduce the plastic load ending up in landfills and oceans or dumped at roadsides, the potential of using plastic polymers in different sectors has been investigated over the years leading to their potential application in pavement laying, concrete industry, fuel generation and production of carbon-based compounds among which activated carbons (AC) is a prime example. As one of the most recommended adsorbents for removing contaminants from water and adsorbing greenhouse gases, AC creates a potential sector for using discarded plastic to further treat pollutants and approach closer to a circular economy for plastics. This paper analyses the production process, the effect of production parameters on AC characteristics and properties that aid in adsorption. The interdependence of these factors determines the surface area, porosity, relative micropore and mesopore volume, thereby defining the utility for removing contaminant molecules of a particular size. Furthermore, this work discusses the application of AC along with a summary of the earlier works leading to the existing gaps in the research area. Production costs, formation of by-products including toxic substances and adsorbate selectivity are the major issues that have restricted the commercial application of this process towards its practical use. Research aimed at valorization of plastic waste into ACs would minimize the solid waste burden, along with treating other pollutants.

Synthesis, Characterization, and Gas Adsorption Performance of Amine-Functionalized Styrene-Based Porous Polymers

In recent years, porous materials have been extensively studied by the scientific community owing to their excellent properties and potential use in many different areas, such as gas separation and adsorption. Hyper-crosslinked porous polymers (HCLPs) have gained attention because of their high surface area and porosity, low density, high chemical and thermal stability, and excellent adsorption capabilities in comparison to other porous materials. Herein, we report the synthesis, characterization, and gas (particularly CO₂) adsorption performance of a series of novel styrene-based HCLPs. The materials were prepared in two steps. The first step involved radical copolymerization of divinylbenzene (DVB) and 4-vinylbenzyl chloride (VBC), a non-porous gel-type polymer, which was then modified by hyper-crosslinking, generating micropores with a high surface area of more than 700 m² g^-1. In the following step, the polymer was impregnated with various polyamines that reacted with residual alkyl chloride groups on the pore walls. This impregnation substantially improved the CO₂/N₂ and CO₂/CH₄ adsorption selectivity.

Structure-oriented conversions of plastics to carbon nanomaterials

The accumulation of waste plastics has caused serious environmental issues due to their unbiodegradable nature and hazardous additives. Converting waste plastics to different carbon nanomaterials (CNMs) is a promising approach to minimize plastic pollution and realize advanced manufacturing of CNMs. The reported plastic-derived carbons include carbon filaments (i.e. carbon nanotubes and carbon nanofibers), graphene, carbon nanosheets, carbon sphere, and porous carbon. In this review, we present the influences of different intrinsic structures of plastics on the pyrolysis intermediates. We also reveal that non-charring plastics are prone to being pyrolyzed into light hydrocarbons while charring plastics are prone to being pyrolyzed into aromatics. Subsequently, light hydrocarbons favor to form graphite while aromatics are inclined to form amorphous carbon during the carbon formation process. In addition, the conversion tendency of different plastics into various morphologies of carbon is concluded. We also discuss other impact factors during the transformation process, including catalysts, temperature, processing duration and templates, and reveal how to obtain different morphological CNMs from plastics. Finally, current technology limitations and perspectives are presented to provide future research directions in effective plastic conversion and advanced CNM synthesis.

The impact factors in transforming plastics into carbon nanomaterials are reviewed.

The carbon morphology tendency from different plastics is revealed.

Directions for future research on plastic carbonization are presented.

A Method of Managing Waste Oak Flour as a Biocomponent for Obtaining Composites Based on Modified Soybean Oil

The aim of the present research was the development of a management method for wood-processing waste that was obtained during the production of parquet flooring. Currently mostly useless, such waste mainly ends up in landfills. The oak waste flour was used as a reinforcement material for epoxy biocomposites based on the polyaddition product of epoxidized soybean oil and bisphenol-A (ESBO_BPA). The biofiller was subjected to mercerization, acetylation, and diisocyanate modification to increase the typically poor compatibility between the highly hydrophilic wood fibers and the hydrophobic polymer matrix. Among the analyzed epoxy biocomposites, which contained about 60% raw materials of natural origin, it was found that the best mechanical properties were recorded for cured samples of the ESBO_BPA composition filled with 5 wt % of oak flour mercerized using a 5% solution of NaOH. It was also proven that a higher concentration of alkali deteriorated the mechanical-strengthening properties of the wood filler. The acetylation of the biofiller independently in the best elimination of hydroxyl groups from its structure also removed irregular strips and smoothed its surface. This resulted in a poorer wettability of the oak flour surface by the polymer and consequently an easier pullout of the filler from the polymer matrix and worse mechanical properties of the wood/epoxy composite. To the best of the authors' knowledge, the present research was the first to examine the possibility of the application of parquet flooring post-production wood flour in biomaterials based on a polyaddition product of epoxidized soybean oil and bisphenol-A.

A unified view on catalytic conversion of biomass and waste plastics

Originating from the desire to improve sustainability, producing fuels and chemicals from the conversion of biomass and waste plastic has become an important research topic in the twenty-first century. Although biomass is natural and plastic synthetic, the chemical nature of the two are not as distinct as they first appear. They share substantial structural similarities in terms of their polymeric nature and the types of bonds linking their monomeric units, resulting in close relationships between the two materials and their conversions. Previously, their transformations were mostly studied and reviewed separately in the literature. Here, we summarize the catalytic conversion of biomass and waste plastics, with a focus on bond activation chemistry and catalyst design. By tracking the historical and more recent developments, it becomes clear that biomass and plastic have not only evolved their unique conversion pathways but have also started to cross paths with each other, with each influencing the landscape of the other. As a result, this Review on the catalytic conversion of biomass and waste plastic in a unified angle offers improved insights into existing technologies, and more importantly, may enable new opportunities for future advances.

Diamond in the rough: Polishing waste polyethylene terephthalate into activated carbon for CO2 capture

The scientific community has believed the potential of waste PET plastics as an effective carbon precursor, however, developing PET-derived activated carbons (PETACs) for a specific application is still a challenge we are facing. To overcome the limitation, a whole chain from development method screening to experiments design, finally to sample optimization, for a sample with promising performance, is proposed in this work. By employing PETACs as CO₂ adsorbents, the waste PET plastics, which we believed the "diamond in the rough", have been polished successfully. Therewith the problems of plastic pollution and the greenhouse effect could be simultaneously solved. The first half part of this paper is a mini review: the PETACs development methods were reviewed and the most suitable solution to develop CO₂ adsorbent, i.e., the two-step chemical activation method, was selected. In addition to that, the necessary procedure variables and their value range were determined. In the second half part, the central composite design method was applied for experiments design in which the procedure variables obtained were regarded as the independent indicators (factors here) while the performance indicators, including yield, CO₂ adsorption uptake, and CO₂ over N₂ selectivity, were treated as the dependent indicators (responses here). The responses were obtained through the characterization of the samples developed and statistical analysis could be applied to reveal the relations between the factors and responses. A high-value PETAC, P600K600-1.5, with the highest gas selectivity (22.189) and decent CO₂ adsorption uptake (3.933 mmol/g) was successfully designed.

Corn Cob Char as Catalyst Support for Developing Carbon Nanotubes from Waste Polypropylene Plastics: Comparison of Activation Techniques

The future and continuity of nanomaterials are heavily dependent on their availability and affordability. This could be achieved when cheap materials are actively employed as starting materials for nanomaterials synthesis. In this study, waste corn cob char was used as support during the preparation of the NiMo catalyst, and the effect of different char-activating techniques on the microstructure, yield and quality of carbon nanotubes (CNTs) obtained from waste polypropylene (PP) plastics using the chemical vapor deposition (CVD) technique was investigated. Properties of the catalysts and obtained nanomaterials were evaluated by XRD, SEM, N₂ physisorption experiment, FTIR, Raman spectroscopy and TEM. Results showed improved surface properties of the NiMo catalyst supported on chemically (NiMo/AC_X) and physically activated char (NiMo/AC_T) compared to the NiMo catalyst supported on non-activated char (NiMo/AC₀). High-quality CNTs were deposited over NiMo/AC_T compared to NiMo/AC_X and NiMo/AC₀. It was also observed that different activation methods resulted in the formation of CNTs of different microstructures and yield. Optimum yield (470.0 mg CNTs/g catalyst) was obtained with NiMo/AC₀, while NiMo/AC_T gave the least product yield (70.0 mg CNTs/g catalyst) of the as-produced nanomaterials. Based on the results of the analysis, it was concluded that utilizing a cheap pyrogenic product of waste corn cob as a catalyst support in a bimetallic NiMo catalyst could offer a promising approach to mass producing CNTs and as a low-cost alternative in CNTs production from waste plastics.

Upcycling to Sustainably Reuse Plastics

Plastics are now indispensable in daily lives. However, the pollution from plastics is also increasingly becoming a serious environmental issue. Recent years have seen more sustainable approaches and technologies, commonly known as upcycling, to transform plastics into value-added materials and chemical feedstocks. In this review, the latest research on upcycling is presented, with a greater focus on the use of renewable energy as well as the more selective methods to repurpose synthetic polymers. First, thermal upcycling approaches are briefly introduced, including the redeployment of plastics for construction uses, 3D printing precursors, and lightweight materials. Then, some of the latest novel strategies to deconstruct condensation polymers to monomers for repolymerization or introduce vulnerable linkers to make the plastics more degradable are discussed. Subsequently, the review will explore the breakthroughs in plastics upcycling by heterogeneous and homogeneous photocatalysis, as well as electrocatalysis, which transform plastics into more versatile fine chemicals and materials while simultaneously mitigating global climate change. In addition, some of the biotechnological advances in the discovery and engineering of microbes that can decompose plastics are also presented. Finally, the current challenges and outlook for future plastics upcycling are discussed to stimulate global cooperation in this field.

Closing the Carbon Loop in the Circular Plastics Economy

Today, plastics are ubiquitous in everyday life, problem solvers of modern technologies, and crucial for sustainable development. Yet the surge in global demand for plastics of the growing world population has triggered a tidal wave of plastic debris in the environment. Moving from a linear to a zero-waste and carbon-neutral circular plastic economy is vital for the future of the planet. Taming the plastic waste flood requires closing the carbon loop through plastic reuse, mechanical and molecular recycling, carbon capture, and use of the greenhouse gas carbon dioxide. In the quest for eco-friendly products, plastics do not need to be reinvented but tuned for reuse and recycling. Their full potential must be exploited regarding energy, resource, and eco efficiency, waste prevention, circular economy, climate change mitigation, and lowering environmental pollution. Biodegradation holds promise for composting and bio-feedstock recovery, but it is neither the Holy Grail of circular plastics economy nor a panacea for plastic littering. As an alternative to mechanical downcycling, molecular recycling enables both closed-loop recovery of virgin plastics and open-loop valorization, producing hydrogen, fuels, refinery feeds, lubricants, chemicals, and carbonaceous materials. Closing the carbon loop does not create a Perpetuum Mobile and requires renewable energy to achieve sustainability. This article is protected by copyright. All rights reserved.

Conversion of Plastic Waste to Carbon-Based Compounds and Application in Energy Storage Devices

At present, plastic waste accumulation has been observed as one of the most alarming environmental challenges, affecting all forms of life, economy, and natural ecosystems, worldwide. The overproduction of plastic materials is mainly due to human population explosion as well as extraordinary proliferation in the global economy accompanied by global productivity. Under this threat, the development of benign and green alternative solutions instead of traditional disposal methods such as conversion of plastic waste materials into cherished carbonaceous nanomaterials such as carbon nanotubes (CNTs), carbon quantum dots (CQDs), graphene, activated carbon, and porous carbon is of utmost importance. This critical review thoroughly summarizes the different types of daily used plastics, their types, properties, ways of accumulation and their effect on the environment and human health, treatment of waste materials, conversion of waste materials into carbon-based compounds through different synthetic schemes, and their utilization in energy storage devices particularly in supercapacitors, as well as future perspectives. The main purpose of this review is to help the targeted audience to design their futuristic study in this desired field by providing information about the work done in the past few years.

Synthesis of low-density polyethylene derived carbon nanotubes for activation of persulfate and degradation of water organic micropollutants in continuous mode

Plastic derived carbon nanotubes (CNTs) were tested as catalysts in persulfate activation for the first time. Four catalysts were prepared by wetness impregnation and co-precipitation (using Al₂O₃, Ni, Fe and/or Al) and implemented to grow CNTs by chemical vapour deposition (CVD) using low-density polyethylene (LDPE) as carbon feedstock. A catalyst screening was performed in batch mode and the best performing CNTs (CNT@Ni+Fe/Al₂O₃-cp) led to a high venlafaxine mass removal rate (3.17 mg g^-1 h^-1) in ultrapure water after 90 min (even with a mixture of micropollutants). Its degradation increased when the matrix was replaced by drinking water and negligibly affected in surface water. A composite polymeric membrane was then fabricated with CNT@Ni+Fe/Al₂O₃-cp and polyvinylidene fluoride (PVDF), a high venlafaxine mass removal rate in surface water being also observed in 24 h of continuous operation. Therefore, the results herein reported open a window of opportunity for the valorisation of plastic wastes in this catalytic application performed in continuous mode.

Waste to white light: a sustainable method for converting biohazardous waste to broadband white LEDs

The Covid-19 pandemic has generated a lot of non-degradable biohazardous plastic waste across the globe in the form of disposable surgical and N95 masks, gloves, face shields, syringes, bottles and plastic storage containers. In the present work we address this problem by recycling plastic waste to single system white light emitting carbon dots (CDs) using a pyrolytic method. The synthesized CDs have been embedded into a transparent polymer to form a carbon dot phosphor. This CD phosphor has a broad emission bandwidth of 205 nm and is stable against photo degradation for about a year. A white LED with CRI ∼70 and CIE co-ordinates of (0.25, 0.32) using the fabricated CD phosphor is reported. Further our phosphor is scalable and is environmentally sustainable, and will find wide application in next generation artificial lighting systems.

Critical advances and future opportunities in upcycling commodity polymers

The vast majority of commodity plastics do not degrade and therefore they permanently pollute the environment. At present, less than 20% of post-consumer plastic waste in developed countries is recycled, predominately for energy recovery or repurposing as lower-value materials by mechanical recycling. Chemical recycling offers an opportunity to revert plastics back to monomers for repolymerization to virgin materials without altering the properties of the material or the economic value of the polymer. For plastic waste that is either cost prohibitive or infeasible to mechanically or chemically recycle, the nascent field of chemical upcycling promises to use chemical or engineering approaches to place plastic waste at the beginning of a new value chain. Here state-of-the-art methods are highlighted for upcycling plastic waste into value-added performance materials, fine chemicals and specialty polymers. By identifying common conceptual approaches, we critically discuss how the advantages and challenges of each approach contribute to the goal of realizing a sustainable plastics economy.

Plastic recycling and their use as raw material for the synthesis of carbonaceous materials

Pollution by polymeric materials - in particular plastics - has a negative effect on the health of our planet. Approximately 4.9 billion tons of plastic are estimated to have been improperly disposed of, with the environment as their final destination. This scenario comes from a linear economic system, extraction-production-consumption and finally disposal. The alarming panorama has created the need to find technological solutions that generate new uses for discarded polymeric materials or turn them into part of the production process to produce new and novel materials, such as carbon nanotubes, graphene, or other carbonaceous materials of high added value, modifying the economy for a circular and sustainable production model. This review highlights the negative impact that the disposal of plastic materials has on the environment and the research needs that allow solving the pollution problems generated in the environment by these wastes. Also, the review highlights the current and future directions of recovery plastic waste research-based to promote innovations in the plastic production sector that could allow obtaining breakpoints in other industrial sectors with the technology-based companies.

Plastic Waste Precursor-Derived Fluorescent Carbon and Construction of Ternary FCs@CuO@TiO2 Hybrid Photocatalyst for Hydrogen Production and Sensing Application

A sustainable nexus between renewable energy production and plastic abatement is imperative for overall sustainable development. In this regard, this study aims to develop a cheaper and environmentally friendly nexus between plastic waste management, wastewater treatment, and renewable hydrogen production. Fluorescent carbon (FCs) were synthesized from commonly used LDPE (low-density polyethylene) by a facile hydrothermal approach. Optical absorption study revealed an absorption edge around 300 nm and two emission bands at 430 and 470 nm. The morphological analysis showed two different patterns of FCs, a thin sheet with 2D morphology and elongated particles. The sheet-shaped particles are 0.5 μm in size, while as for elongated structures, the size varies from 0.5 to 1 μm. The as-synthesized FCs were used for the detection of metal ions (reference as Cu2+ ions) in water. The fluorescence intensity of FCs versus Cu2+ ions depicts its upright analytical ability with a limit of detection (LOD) reaching 86.5 nM, which is considerably lesser than earlier reported fluorescence probes derived from waste. After the sensing of Cu2+, the as-obtained FCs@Cu2+ was mixed with TiO2 to form a ternary FCs@CuO@TiO2 composite. This ternary composite was utilized for photocatalytic hydrogen production from water under 1.5 AM solar light irradiation. The H2 evolution rate was found to be ~1800 μmolg−1, which is many folds compared to the bare FCs. Moreover, the optimized FCs@CuO@TiO2 ternary composite showed a photocurrent density of ~2.40 mA/cm2 at 1 V vs. Ag/AgCl, in 1 M Na2SO4 solution under the illumination of simulated solar light. The achieved photocurrent density corresponds to the solar-to-hydrogen (STH) efficiency of ~0.95%. The efficiency is due to the fluorescence nature of FCs and the synergistic effect of CuO embedded in TiO2, which enhances the optical absorption of the composite by reaching the bandgap of 2.44 eV, apparently reducing the recombination rate, which was confirmed by optoelectronic, structural, and spectroscopic characterizations.

A review of microwave pyrolysis as a sustainable plastic waste management technique

The high demand for plastic has led to plastic waste accumulation, improper disposal and environmental pollution. Even though some of this waste is recycled, most ends up in landfills or flows down rivers into the oceans. Therefore, researchers are now exploring better ways to solve the plastic waste management problem. From a socio-economic perspective, there is also a concerted effort to enable energy recovery from plastic waste and convert it into useful products to generate income for targeted segments of the population. In fact, this concept of waste-to-wealth has been adopted by the United Nations as part of its Sustainable Development Goals strategies. The current article begins by reviewing the strengths and weaknesses of plastic recycling before focusing specifically on microwave pyrolysis as an alternative to conventional technologies in plastic waste management, due to its benefit in providing fast and energy-efficient heating. The key parameters that are reviewed in this paper include different types of plastic, types of absorbent, temperatures, microwave power, residence time, and catalysts. The yield of the final product (oil, gaseous and char) varies depending on the main process parameters. Key challenges and limitations of microwave pyrolysis are also discussed in this paper.

Conversion of pyrolytic non-condensable gases from polypropylene co-polymer into bamboo-type carbon nanotubes and high-quality oil using biochar as catalyst

The conversion of low-value plastic waste into high-value products such as carbon nanomaterial is of recent interest. In the current study, the non-condensable pyrolysis gases, produced from Polypropylene Copolymer (PPC) feedstock, was converted into bamboo-type carbon nanotubes (BCNTs) through catalytic chemical vapour deposition using biochar. Experiments were conducted in a three-zone furnace fixed bed reactor, where PPC was pyrolysed in the second zone and carbon nanotubes (CNTs) growth was eventuated in the third zone. The effects of different growth temperatures (500, 700, 900 °C) and biochar particle sizes (nanoparticle as well as 0-100 and 100-300 μm) were investigated to optimise the production of hydrogen and the yield of carbon nanotubes on the biochar surface. Biochar samples used in the synthesis of CNTs were obtained from the pyrolysis of saw dust at 700 °C in a muffle furnace. Analyses performed by using Scanning electron microscopy, Transmission electron microscopy, X-ray diffraction, and Raman spectroscopy techniques suggested that the best crystalline structure of CNTs were obtained at 900 °C with nano-sized biochar as a catalyst. The strong gas-solid contact and void fraction of nano-sized particles enhances the diffusion-precipitation mechanism, leading to the growth of CNTs. The nano-sized biochar increased hydrogen production at 900 °C and reduced the polycyclic aromatic hydrocarbons content in oil to only 1%, which is advantageous for further utilisation. Therefore, the production of high-value CNTs from waste plastic using low-cost biochar catalyst can be a sustainable approach in the management of waste plastic while participating in the circular economy.

The road to sustainable use and waste management of plastics in Portugal

As a European Union (EU) member, Portugal must comply with reductions in plastic waste. In Portugal, the 330 items/100 m of beach litter, comprising up to 3.9 million pieces and of which 88% is plastic, is higher than the EU median (149 items/100 m) and must be reduced to 20 items/100 m (94%). Integrative measures are needed to reduce littering and improve plastics' use and disposal under the circular economy. Of this 414 kt of plastic packaging waste, 163 kt were declared plastic packaging, 140 kt subjected to recycling, and 94 kt to energy recovery. The current recycling rate of plastic packaging (34%) should be improved to reach EU recycling averages (42%) and goals and to provide widespread benefits, considering revenues of 167 €/t. As a net importer of waste, Portugal could benefit from the valorization of imported waste. Besides increased recycling, pyrolysis and gasification could provide short-term alternatives for producing value-added substances from plastic waste, such as hydrogen, consistent with the National Plan of Hydrogen and improving ongoing regulations on single-use plastics. This manuscript provides an integrative view of plastics in Portugal, from use to disposal, providing specific recommendations under the circular economy.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available in the online version of this article at 10.1007/s11783-021-1439-x and is accessible for authorized users.

The Future of Flash Graphene for the Sustainable Management of Solid Waste

Graphene research has steadily increased, and its commercialization in many applications is becoming a reality because of its superior physicochemical properties and advances in synthesis techniques. However, bulk-scale production of graphene still requires large amounts of solvents, electrochemical treatment, or sonication. Recently, a method was discovered to convert bulk quantities of carbonaceous materials to graphene using flash Joule heating (FJH) and, so named, flash graphene (FG). This method can be used to turn various solid wastes containing the prerequisite element carbon into FG. Globally, more than 2 billion tons of municipal solid waste (MSW) are generated every year and, in many municipalities, are becoming unmanageable. The most commonly used waste management methods include recycling, composting, anaerobic digestion, incineration, gasification, pyrolysis, and landfill disposal. However, around 70% of global waste ends up in landfills or open dumps, while the rest is recycled, composted, or incinerated. Even the various waste valorization techniques, such as pyrolysis and gasification, produce some waste residues that have their ultimate destination in landfills. Thus, technologies that can minimize waste volume or convert waste into valuable products are required. The thermal treatment process of FJH for FG production provides both waste volume reduction and valorization in the form of FG. In this Perspective, we provide an overview of FJH and its possible applications in various types of waste conversion/valorization. We describe the typical current MSW management system as well as the potential for creating FG at various stages and propose a schematic plan for the incorporation of FG in MSW management. We also analyze the strengths, weaknesses, opportunities, and threats of MSW as an FG precursor in terms of technical, economic, environmental, and social sustainability. This valuable waste valorization and management strategy can help achieve near-zero waste and an economy-boosting MSW management system.

Growth, Properties, and Applications of Branched Carbon Nanostructures

Nanomaterials featuring branched carbon nanotubes (b-CNTs), nanofibers (b-CNFs), or other types of carbon nanostructures (CNSs) are of great interest due to their outstanding mechanical and electronic properties. They are promising components of nanodevices for a wide variety of advanced applications spanning from batteries and fuel cells to conductive-tissue regeneration in medicine. In this concise review, we describe the methods to produce branched CNSs, with particular emphasis on the most widely used b-CNTs, the experimental and theoretical studies on their properties, and the wide range of demonstrated and proposed applications, highlighting the branching structural features that ultimately allow for enhanced performance relative to traditional, unbranched CNSs.

Strategic Approach Towards Plastic Waste Valorization: Challenges and Promising Chemical Upcycling Possibilities

Plastic waste, which is one of the major sources of pollution in the landfills and oceans, has raised global concern, primarily due to the huge production rate, high durability, and the lack of utilization of the available waste management techniques. Recycling methods are preferable to reduce the impact of plastic pollution to some extent. However, most of the recycling techniques are associated with different drawbacks, high cost and downgrading of product quality being among the notable ones. The sustainable option here is to upcycle the plastic waste to create high-value materials to compensate for the cost of production. Several upcycling techniques are constantly being investigated and explored, which is currently the only economical option to resolve the plastic waste issue. This Review provides a comprehensive insight on the promising chemical routes available for upcycling of the most widely used plastic and mixed plastic wastes. The challenges inherent to these processes, the recent advances, and the significant role of the science and research community in resolving these issues are further emphasized.

Current Developments in the Chemical Upcycling of Waste Plastics Using Alternative Energy Sources

The management of plastics waste is one of the most urgent and significant global problems now. Historically, waste plastics have been predominantly discarded, mechanically recycled, or incinerated for energy production. However, these approaches typically relied on thermal processes like conventional pyrolysis, which are energy-intensive and unsustainable. In this Minireview, some of the latest advances and future trends in the chemical upcycling of waste plastics by photocatalytic, electrolytic, and microwave-assisted pyrolysis processes are discussed as more environmentally friendly alternatives to conventional thermal reactions. We highlight how the transformation of different types of plastics waste by exploiting alternative energy sources can generate value-added products such as fuels (H₂ and other carbon-containing small molecules), chemical feedstocks, and newly functionalized polymers, which can contribute to a more sustainable and circular economy.

Recent Advances in Waste Plastic Transformation into Valuable Platinum-Group Metal-Free Electrocatalysts for Oxygen Reduction Reaction

Plastic waste causes severe environmental hazards, owing to inadequate disposal and limited recycling. Under the framework of circular economy, there are urgent demands to valorize plastic waste more safely and sustainably. Therefore, much scientific interest has been witnessed recently in plastic waste-derived electrocatalysts for the oxygen reduction reaction (ORR), where the plastic waste acts as a cost-effective and easily available precursor for the carbon backbone. The ORR is not only a key efficiency indicator for fuel cells and metal-air batteries but also a major obstacle for their commercial realization. The applicability of the aforementioned electrochemical devices is limited, owing to sluggish ORR activity and expensive platinum-group metal electrocatalysts. However, waste-derived ORR electrocatalysts are emerging as a potential substitute that could be inexpensively fabricated upon the conversion of plastic waste into active materials containing earth-abundant transition metals. In this Minireview, very recent research developments regarding plastic waste-derived ORR electrocatalysts are critically summarized with a prime focus on the followed synthesis routes, physicochemical properties of the derived electrocatalysts, and their ultimate electrochemical performance. Finally, the prospects for the future development of plastic waste-derived electrocatalysts are discussed.

Review of the valorization options for the proper disposal of face masks during the COVID-19 pandemic

The COVID-19 pandemic has affected not only human health and economies but also the environment due to the large volume of waste in the form of discarded personal protective equipment. The remarkable increase in the global usage of face masks, which mainly contain polypropylene, and improper waste management have led to a serious environmental challenge called microplastic pollution. Potential practices for waste management related to waste valorization of discarded face masks as the major type of waste during the COVID-19 pandemic are explored in this study. Recommendations based on governmental practices, situation of state facilities, and societal awareness and engagement applicable to emergency (including COVID-19 pandemic) and postpandemic scenarios are offered while considering potential solutions and available waste management practices in different countries during emergency conditions. However, multicriteria decision making for a country must determine the optimal solution for waste management on the basis of all affecting factors. Awareness of scientific, governments, and communities worldwide will successfully eradicate this important environmental issue.

Effect of Different Catalyst Supports on the Quality, Yield and Morphology of Carbon Nanotubes Produced from Waste Polypropylene Plastics

The role of the effect of the support on the reactivity of heterogeneous catalysts cannot be over-emphasized. Therefore, the study documented in this article investigated the effect of different metal oxide supports (MgO, CaO and TiO2) and mixed oxide supports (CaTiO3) on the performance of a bimetallic NiMo catalyst prepared via the sol–gel method during the catalytic growth of carbon nanotubes (CNTs) from waste polypropylene (PP). Waste PP was pyrolyzed at 700 °C in a single-stage chemical vapor deposition reactor and off-gas was utilized in-situ as a cheap carbon feedstock for the growth of CNTs under similar conditions for all the prepared NiMo catalysts (supported and unsupported). The structures of the prepared catalysts and deposited carbon were extensively characterized using X-ray diffraction (XRD), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), etc. The catalytic performance of NiMo supported and unsupported catalysts was evaluated in terms of the yield, purity, and morphology of synthesized CNTs. The results revealed that the stabilizing role of supports is fundamental in preventing nanoparticle agglomeration and aggregation, thereby resulting in improved yield and quality of CNTs. Supported NiMo catalysts produced better aligned graphitic and high-quality CNTs. The NiMo/CaTiO3 catalyst produced the highest carbon of 40.0%, while unsupported NiMo produced low-quality CNTs with the lowest carbon yield of 18.4%. Therefore, the type of catalyst support and overall stability of catalytic materials play significant roles in the yield and quality of CNTs produced from waste PP.

Potential Chemicals from Plastic Wastes

Plastic is referred to as a “material of every application”. From the packaging and automotive industries to the medical apparatus and computer electronics sectors, plastic materials are fulfilling demands efficiently. These plastics usually end up in landfills and incinerators, creating plastic waste pollution. According to the Environmental Protection Agency (EPA), in 2015, 9.1% of the plastic materials generated in the U.S. municipal solid waste stream was recycled, 15.5% was combusted for energy, and 75.4% was sent to landfills. If we can produce high-value chemicals from plastic wastes, a range of various product portfolios can be created. This will help to transform chemical industries, especially the petrochemical and plastic sectors. In turn, we can manage plastic waste pollution, reduce the consumption of virgin petroleum, and protect human health and the environment. This review provides a description of chemicals that can be produced from different plastic wastes and the research challenges involved in plastic waste to chemical production. This review also provides a brief overview of the state-of-the-art processes to help future system designers in the plastic waste to chemicals area.