Role of the cytoskeleton in the reaction of fibroblasts to multiple grooved substrata

Topographical depth reveals contact guidance mechanism distinct from focal adhesion confinement

Cellular response to the topography of their environment, known as contact guidance, is a crucial aspect to many biological processes yet remains poorly understood. A prevailing model to describe cellular contact guidance involves the lateral confinement of focal adhesions (FA) by topography as an underlying mechanism governing how cells can respond to topographical cues. However, it is not clear how this model is consistent with the well-documented depth-dependent contact guidance responses in the literature. To investigate this model, we fabricated a set of contact guidance chips with lateral dimensions capable of confining focal adhesions and relaxing that confinement at various depths. We find at the shallowest depth of 330 nm, the model of focal adhesion confinement is consistent with our observations. However, the cellular response at depths of 725 and 1000 nm is inadequately explained by this model. Instead, we observe a distinct reorganization of F-actin at greater depths in which topographically induced cell membrane deformation alters the structure of the cytoskeleton. These results are consistent with an alternative curvature-hypothesis to explain cellular response to topographical cues. Together, these results indicate a confluence of two molecular mechanisms operating at increased induced membrane curvature that govern how cells sense and respond to topography.

Physicochemical cues are not potent regulators of human dermal fibroblast trans-differentiation

Due to their inherent plasticity, dermal fibroblasts hold great promise in regenerative medicine. Although biological signals have been well-established as potent regulators of dermal fibroblast function, it is still unclear whether physiochemical cues can induce dermal fibroblast trans-differentiation. Herein, we evaluated the combined effect of surface topography, substrate rigidity, collagen type I coating and macromolecular crowding in human dermal fibroblast cultures. Our data indicate that tissue culture plastic and collagen type I coating increased cell proliferation and metabolic activity. None of the assessed in vitro microenvironment modulators affected cell viability. Anisotropic surface topography induced bidirectional cell morphology, especially on more rigid (1,000 kPa and 130 kPa) substrates. Macromolecular crowding increased various collagen types, but not fibronectin, deposition. Macromolecular crowding induced globular extracellular matrix deposition, independently of the properties of the substrate. At day 14 (longest time point assessed), macromolecular crowding downregulated tenascin C (in 9 out of the 14 groups), aggrecan (in 13 out of the 14 groups), osteonectin (in 13 out of the 14 groups), and collagen type I (in all groups). Overall, our data suggest that physicochemical cues (such surface topography, substrate rigidity, collagen coating and macromolecular crowding) are not as potent as biological signals in inducing dermal fibroblast trans-differentiation.

Physical Models from Physical Templates Using Biocompatible Liquid Crystal Elastomers as Morphologically Programmable Inks For 3D Printing

Advanced manufacturing has received considerable attention as a tool for the fabrication of cell scaffolds however, finding ideal biocompatible and biodegradable materials that fit the correct parameters for 3D printing and guide cells to align remain a challenge. Herein, a photocrosslinkable smectic-A (Sm-A) liquid crystal elastomer (LCE) designed for 3D printing is presented, that promotes cell proliferation but most importantly induces cell anisotropy. The LCE-based bio-ink allows the 3D duplication of a highly complex brain structure generated from an animal model. Vascular tissue models are generated from fluorescently stained mouse tissue spatially imaged using confocal microscopy and subsequently processed to create a digital 3D model suitable for printing. The 3D structure is reproduced using a Digital Light Processing (DLP) stereolithography (SLA) desktop 3D printer. Synchrotron Small-Angle X-ray Diffraction (SAXD) data reveal a strong alignment of the LCE layering within the struts of the printed 3D scaffold. The resultant anisotropy of the LCE struts is then shown to direct cell growth. This study offers a simple approach to produce model tissues built within hours that promote cellular alignment.

The synergistic effect of physicochemical in vitro microenvironment modulators in human bone marrow stem cell cultures

Modern bioengineering utilises biomimetic cell culture approaches to control cell fate during in vitro expansion. In this spirit, herein we assessed the influence of bidirectional surface topography, substrate rigidity, collagen type I coating and macromolecular crowding (MMC) in human bone marrow stem cell cultures. In the absence of MMC, surface topography was a strong modulator of cell morphology. MMC significantly increased extracellular matrix deposition, albeit in a globular manner, independently of the surface topography, substrate rigidity and collagen type I coating. Collagen type I coating significantly increased cell metabolic activity and none of the assessed parameters affected cell viability. At day 14, in the absence of MMC, none of the assessed genes was affected by surface topography, substrate rigidity and collagen type I coating, whilst in the presence of MMC, in general, collagen type I α1 chain, tenascin C, osteonectin, bone sialoprotein, aggrecan, cartilage oligomeric protein and runt-related transcription factor were downregulated. Interestingly, in the presence of the MMC, the 1000 kPa grooved substrate without collagen type I coating upregulated aggrecan, cartilage oligomeric protein, scleraxis homolog A, tenomodulin and thrombospondin 4, indicative of tenogenic differentiation. This study further supports the notion for multifactorial bioengineering to control cell fate in culture.

A combined physicochemical approach towards human tenocyte phenotype maintenance

During in vitro culture, bereft of their optimal tissue context, tenocytes lose their phenotype and function. Considering that tenocytes in their native tissue milieu are exposed simultaneously to manifold signals, combination approaches (e.g. growth factor supplementation and mechanical stimulation) are continuously gaining pace to control cell fate during in vitro expansion, albeit with limited success due to the literally infinite number of possible permutations. In this work, we assessed the potential of scalable and potent physicochemical approaches that control cell fate (substrate stiffness, anisotropic surface topography, collagen type I coating) and enhance extracellular matrix deposition (macromolecular crowding) in maintaining human tenocyte phenotype in culture. Cell morphology was primarily responsive to surface topography. The tissue culture plastic induced the largest nuclei area, the lowest aspect ratio, and the highest focal adhesion kinase. Collagen type I coating increased cell number and metabolic activity. Cell viability was not affected by any of the variables assessed. Macromolecular crowding intensely enhanced and accelerated native extracellular matrix deposition, albeit not in an aligned fashion, even on the grooved substrates. Gene analysis at day 14 revealed that the 130 kPa grooved substrate without collagen type I coating and under macromolecular crowding conditions positively regulated human tenocyte phenotype. Collectively, this work illustrates the beneficial effects of combined physicochemical approaches in controlling cell fate during in vitro expansion.

Cellular and Subcellular Contact Guidance on Microfabricated Substrates

Topography of the extracellular environment is now recognized as a major biophysical regulator of cell behavior and function. The study of the influence of patterned substrates on cells, named contact guidance, has greatly benefited from the development of micro and nano-fabrication techniques, allowing the emergence of increasingly diverse and elaborate engineered platforms. The purpose of this review is to provide a comprehensive view of the process of contact guidance from cellular to subcellular scales. We first classify and illustrate the large diversity of topographies reported in the literature by focusing on generic cellular responses to diverse topographical cues. Subsequently, and in a complementary fashion, we adopt the opposite approach and highlight cell type-specific responses to classically used topographies (arrays of pillars or grooves). Finally, we discuss recent advances on the key subcellular and molecular players involved in topographical sensing. Throughout the review, we focus particularly on neuronal cells, whose unique morphology and behavior have inspired a large body of studies in the field of topographical sensing and revealed fascinating cellular mechanisms. We conclude by using the current understanding of the cell-topography interactions at different scales as a springboard for identifying future challenges in the field of contact guidance.

Topographical curvature is sufficient to control epithelium elongation

How biophysical cues can control tissue morphogenesis is a central question in biology and for the development of efficient tissue engineering strategies. Recent data suggest that specific topographies such as grooves and ridges can trigger anisotropic tissue growth. However, the specific contribution of biologically relevant topographical features such as cell-scale curvature is still unclear. Here we engineer a series of grooves and ridges model topographies exhibiting specific curvature at the ridge/groove junctions and monitored the growth of epithelial colonies on these surfaces. We observe a striking proportionality between the maximum convex curvature of the ridges and the elongation of the epithelium. This is accompanied by the anisotropic distribution of F-actin and nuclei with partial exclusion of both in convex regions as well as the curvature-dependent reorientation of pluricellular protrusions and mitotic spindles. This demonstrates that curvature itself is sufficient to trigger and modulate the oriented growth of epithelia through the formation of convex “topographical barriers” and establishes curvature as a powerful tuning parameter for tissue engineering and biomimetic biomaterial design.

Transcriptomic Changes Related to Cellular Processes with Particular Emphasis on Cell Activation in Lysosomal Storage Diseases from the Group of Mucopolysaccharidoses

Although mucopolysaccharidoses (MPS), inherited metabolic diseases from the group of lysosomal storage diseases (LSD), are monogenic disorders, recent studies indicated that their molecular mechanisms are complicated. Storage of glycosaminoglycans (GAGs), arising from a deficiency in one of the enzymes involved in the degradation of these compounds, is the primary cause of each MPS type. However, dysfunctions of various cellular organelles and disturbance of cellular processes have been reported which contribute considerably to pathomechanisms of the disease. Here, we present a complex transcriptomic analysis in which all types and subtypes of MPS were investigated, with special emphasis on genes related to cell activation processes. Complex changes in expression of these genes were found in fibroblasts of all MPS types, with number of transcripts revealing higher or lower levels (relative to control fibroblasts) between 19 and over 50, depending on MPS type. Genes in which expression was significantly affected in most MPS types code for proteins involved in following processes, classified according to Gene Ontology knowledge database: cell activation, cell growth, cell recognition, and cell division. Levels of some transcripts (including CD9, CLU, MME and others) were especially significantly changed (over five times relative to controls). Our results are discussed in the light of molecular pathomechanisms of MPS, indicating that secondary and/or tertiary changes, relative to GAG storage, might significantly modulate cellular dysfunctions and contribute to molecular mechanisms of the disease. This may influence the efficacy of various therapies and suggests why various treatments are not fully effective in improving the complex symptoms of MPS.

Osteoblast Responses to Titanium-Coated Subcellular Scaled Microgrooves

Statistical data have consistently shown that implant loosening is a significant causative factor for revision surgeries. Both in vivo and in vitro studies have confirmed the positive influences of microgrooved titanium implant surfaces on improving orthopedic titanium implants compared with a smooth titanium surface. Complete cell-groove adhesion is a prerequisite for rapid and robust osseointegration. For the first time, this work has quantified the influence of the titanium groove width at the subcellular scale (5-20 μm) on osteoblast responses, using titanium-coated microgrooved silicon wafer specimens (surface roughness, R_a = ∼1.5 nm), which can avoid the latent influence of variations in surface roughness from the use of normal titanium substrates. The cell-groove adhesion increased from 53.07% to 98.55% with an increasing groove width from 5 to 20 μm. In addition, both the cell spreading area and cell width were proportional to groove width. However, no statistically significant influence (p > 0.05) of groove width was identified on cell proliferation and differentiation. An exponential model was proposed to predict the groove geometries that can facilitate complete cell-groove adhesion. The underlying mechanisms were discussed. The experimental findings of this study provide a unique basis for the design of titanium implant surfaces.

Dynamic Contact Guidance of Myoblasts by Feature Size and Reversible Switching of Substrate Topography: Orchestration of Cell Shape, Orientation, and Nematic Ordering of Actin Cytoskeletons

Biological cells in tissues alter their shapes, positions, and orientations in response to dynamic changes in their physical microenvironments. Here, we investigated the dynamic response of myoblast cells by fabricating substrates displaying microwrinkles that can reversibly change their direction within 60 s by axial compression and relaxation. To quantitatively assess the collective order of cells, we introduced the nematic order parameter of cells that takes not only the distribution of cell-wrinkle angles but also the degree of cell elongation into account. On the subcellular level, we also calculated the nematic order parameter of actin cytoskeletons that takes the rearrangement of actin filaments into consideration. The results obtained on substrates with different wrinkle wavelengths implied the presence of a characteristic wavelength beyond which the order parameters of both cells and actin cytoskeletons level off. Immunofluorescence labeling of vinculin showed that the focal adhesions were all concentrated on the peaks of wrinkles when the wavelength is below the characteristic value. On the other hand, we found focal adhesions on both the peaks and the troughs of wrinkles when the wavelength exceeds the characteristic level. The emergence of collective ordering of cytoskeletons and the adaptation of cell shapes and orientations were monitored by live cell imaging after the seeding of cells from suspensions. After the cells had reached the steady state, the orientation of wrinkles was abruptly changed by 90°. The dynamic response of myoblasts to the drastic change in surface topography was monitored, demonstrating the coordination of the shape and orientation of cells and the nematic ordering of actin cytoskeletons. The "dynamic" substrates established in this study can be used as a powerful tool in mechanobiology that helps us understand how cytoskeletons, cells, and cell ensembles respond to dynamic contact guidance cues.

Influence of Micropatterning on Human Periodontal Ligament Cells' Behavior

The periodontal ligament (PDL) is highly ordered connective tissue located between the alveolar bone and cementum. An aligned and organized architecture is required for its physiological function. We applied micropatterning technology to arrange PDL cells in 10- or 20-μm-wide extracellular protein patterns. Cell and nuclear morphology, cytoskeleton, proliferation, differentiation, and matrix metalloproteinase system expression were investigated. Micropatterning clearly elongated PDL cells with a low cell-shape index and low spreading area. The nucleus was also elongated as nuclear height increased, but the nuclear volume remained intact. The cytoskeleton was rearranged to form prominent bundles at cells' peripheral regions. Moreover, proliferation was promoted by 10- and 20-μm micropatterning. Osteogenesis and adipogenesis were each inhibited, but micropatterning increased PDL cells' stem cell markers. β-catenin was expelled to cytoplasm. YAP/TAZ nuclear localization and activity both decreased, which might indicate their role in micropatterning-regulated differentiation. Collagen Ι expression increased in micropatterned groups. It might be due to the decreased expression of matrix metalloproteinase-1, 2 and the tissue inhibitor of metalloproteinase-1 gene expression elevation in micropatterned groups. The findings of this study provide insight into the effects of a micropatterned surface on PDL cell behavior and may be applicable in periodontal tissue regeneration.

Multifunctional Coatings and Nanotopographies: Toward Cell Instructive and Antibacterial Implants

In biomaterials science, it is nowadays well accepted that improving the biointegration of dental and orthopedic implants with surrounding tissues is a major goal. However, implant surfaces that support osteointegration may also favor colonization of bacterial cells. Infection of biomaterials and subsequent biofilm formation can have devastating effects and reduce patient quality of life, representing an emerging concern in healthcare. Conversely, efforts toward inhibiting bacterial colonization may impair biomaterial-tissue integration. Therefore, to improve the long-term success of medical implants, biomaterial surfaces should ideally discourage the attachment of bacteria without affecting eukaryotic cell functions. However, most current strategies seldom investigate a combined goal. This work reviews recent strategies of surface modification to simultaneously address implant biointegration while mitigating bacterial infections. To this end, two emerging solutions are considered, multifunctional chemical coatings and nanotopographical features.

Initial contact guidance during cell spreading is contractility-independent

A wide variety of cell types exhibit substrate topography-based behavior, also known as contact guidance. However, the precise cellular mechanisms underlying this process are still unknown. In this study, we investigated contact guidance by studying the reaction of human endothelial cells (ECs) to well-defined microgroove topographies, both during and after initial cell spreading. As the cytoskeleton plays a major role in cellular adaptation to topographical features, two methods were used to perturb cytoskeletal structures. Inhibition of actomyosin contractility with the chemical inhibitor blebbistatatin demonstrated that initial contact guidance events are independent of traction force generation. However, cell alignment to the grooved substrate was altered at later time points, suggesting an initial 'passive' phase of contact guidance, followed by a contractility-dependent 'active' phase that relies on mechanosensitive feedback. The actin cytoskeleton was also perturbed in an indirect manner by culturing cells upside down, resulting in decreased levels of contact guidance and suggesting that a possible loss of contact between the actin cytoskeleton and the substrate could lead to cytoskeleton impairment. The process of contact guidance at the microscale was found to be primarily lamellipodia driven, as no bias in filopodia extension was observed on micron-scale grooves.

Micropatterning of reagent-free, high energy crosslinked gelatin hydrogels for bioapplications

Hydrogels are crosslinked polymeric gels of great interest in the field of tissue engineering, particularly as biocompatible cell or drug carriers. Reagent-free electron irradiated gelatin is simple to manufacture, inexpensive and biocompatible. Here, the potential to micropattern gelatin hydrogel surfaces during electron irradiation crosslinking was demonstrated as a promising microfabrication technique to produce thermally stable structures on highly relevant length scales for bioapplications. In the present work, grooves of 3.75 to 170 µm width and several hundred nanometers depth were transferred onto gelatin hydrogels during electron irradiation and characterized by 3D confocal microscopy after exposure to ambient and physiological conditions. The survival and influence of these microstructures on cellular growth was further characterized using NIH 3T3 fibroblasts. Topographical modifications produced surface structures on which the cultured fibroblasts attached and responded by adapting their morphologies. This developed technique allows for simple and effective structuring of gelatin and opens up new possibilities for irradiation crosslinked hydrogels in biomedical applications in which cell attachment and contact guidance are favored. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 320-330, 2018.

Reconstructing spinal dura-like tissue using electrospun poly(lactide-co-glycolide) membranes and dermal fibroblasts to seamlessly repair spinal dural defects in goats

Many neuro- and spinal surgeries involving access to the underlying nervous tissue will cause defect of spinal dural mater, further resulting in cerebrospinal fluid leakage. The current work was thus aimed to develop a package which included two layers of novel electrospun membranes, dermal fibroblasts and mussel adhesive protein for repairing spinal dural defect. The inner layer is electrospun fibrous poly(lactide-co-glycolide) membrane with oriented microstructure (O-poly(lactide-co-glycolide)), which was used as a substrate to anchor dermal fibroblasts as seed cells to reconstitute dura-like tissue via tissue engineering technique. The outer layer is chitosan-coated electrospun nonwoven poly(lactide-co-glycolide) membrane (poly(lactide-co-glycolide)-chitosan). During surgery, the inner reconstituted tissue layer was first used to directly cover dura defects, while the outer layer was placed onwards with its marginal area tightly immobilized to the surrounding normal spinal dura aided by mussel adhesive protein. Efficacy of the current design was verified in goats with spinal dural defects (0.6 cm × 0.5 cm) in lumbar. It was shown that seamless and quick sealing of the defect area with the implants was realized by mussel adhesive protein. Guided tissue growth and regeneration in the defects of goats were observed when they were repaired by the current package. Effective cerebrospinal fluid containment and anti-adhesion of the regenerated tissue to the surrounding tissue could be achieved in the current animal model. Hence, it could be ascertained that the current package could be a favorite choice for surgeries involving spinal dural defects.

Contact guidance of smooth muscle cells is associated with tension-mediated adhesion maturation

Contact guidance is a cellular phenomenon observed during wound healing and developmental patterning, in which adherent cells align in the same direction due to physical cues. Despite numerous studies, the molecular mechanism underlying the consistent cell orientation is poorly understood. Here we fabricated microgrooves with a pitch of submicrons to study contact guidance of smooth muscle cells. We show that both integrin-based cell-substrate adhesions and cellular tension are necessary to achieve contact guidance along microgrooves. We further show through analyses on paxillin that cell-substrate adhesions are more prone to become mature when they run along microgrooves than align at an angle to the direction of microgrooves. Because cellular tension promotes the maturation of cell-substrate adhesions, we propose that the adhesions aligning across microgrooves are not physically efficient for bearing cellular tension compared to those aligning along microgrooves. Thus, the proposed model describes a mechanism of contact guidance that cells would finally align preferentially along microgrooves because cellular tensions are more easily borne within the direction, and the direction of resulting mature adhesions determines the direction of the whole cells.

Nonautonomous contact guidance signaling during collective cell migration

Directed migration of groups of cells is a critical aspect of tissue morphogenesis that ensures proper tissue organization and, consequently, function. Cells moving in groups, unlike single cells, must coordinate their migratory behavior to maintain tissue integrity. During directed migration, cells are guided by a combination of mechanical and chemical cues presented by neighboring cells and the surrounding extracellular matrix. One important class of signals that guide cell migration includes topographic cues. Although the contact guidance response of individual cells to topographic cues has been extensively characterized, little is known about the response of groups of cells to topographic cues, the impact of such cues on cell-cell coordination within groups, and the transmission of nonautonomous contact guidance information between neighboring cells. Here, we explore these phenomena by quantifying the migratory response of confluent monolayers of epithelial and fibroblast cells to contact guidance cues provided by grooved topography. We show that, in both sparse clusters and confluent sheets, individual cells are contact-guided by grooves and show more coordinated behavior on grooved versus flat substrates. Furthermore, we demonstrate both in vitro and in silico that the guidance signal provided by a groove can propagate between neighboring cells in a confluent monolayer, and that the distance over which signal propagation occurs is not significantly influenced by the strength of cell-cell junctions but is an emergent property, similar to cellular streaming, triggered by mechanical exclusion interactions within the collective system.

Spatial patterning of endothelium modulates cell morphology, adhesiveness and transcriptional signature

Microscale and nanoscale structures can spatially pattern endothelial cells (ECs) into parallel-aligned organization, mimicking their cellular alignment in blood vessels exposed to laminar shear stress. However, the effects of spatial patterning on the function and global transcriptome of ECs are incompletely characterized. We used both parallel-aligned micropatterned and nanopatterned biomaterials to evaluate the effects of spatial patterning on the phenotype of ECs, based on gene expression profiling, functional characterization of monocyte adhesion, and quantification of cellular morphology. We demonstrate that both micropatterned and aligned nanofibrillar biomaterials could effectively guide EC organization along the direction of the micropatterned channels or nanofibrils, respectively. The ability of ECs to sense spatial patterning cues were abrogated in the presence of cytoskeletal disruption agents. Moreover, both micropatterned and aligned nanofibrillar substrates promoted an athero-resistant EC phenotype by reducing endothelial adhesiveness for monocytes and platelets, as well as by downregulating the expression of adhesion proteins and chemokines. We further found that micropatterned ECs have a transcriptional signature that is unique from non-patterned ECs, as well as from ECs aligned by shear stress. These findings highlight the importance of spatial patterning cues in guiding EC organization and function, which may have clinical relevance in the development of vascular grafts that promote patency.

A bio-inspired neural environment to control neurons comprising radial glia, substrate chemistry and topography

Achieving alignment of cells is key to the success of regenerative strategies of neural tissue. We report a high-throughput method to investigate neural cell response to surface chemistry overlaid orthogonally onto a gradient of gradually changing groove widths. Using a bio-inspired approach wherein radial glial cells, which naturally guide neurons in the developing brain, enhance the attachment and directional outgrowth of neurons, we show the differences in the interaction and cellular response of glia, neurons and co-cultured cells. Radial glia were found to preferentially reside in grooves of width 6-35 μm with greater alignment to grooves <10 μm on the hydrophobic and hydrophilic extremes of chemistry. When neurons were sequentially cultured after radial glia, they showed enhanced alignment compared to when they were cultured alone, for all chemistries and groove widths. This is not dependent on co-localisation of the neurons with glia suggesting the radial glial cells pre-condition the substrate giving rise to enhanced attachment and alignment of subsequently cultured neurons. The results indicate a dependence of both primary radial glia and neuron responses on surface chemistry and micro-groove width. Grooved surfaces (width 5-10 μm) of mid-range wettability show the greatest potential to significantly enhance axonal alignment and, therefore, potential regeneration, when pre-conditioned by radial glia, highlighting the importance of surface engineering for neural scaffolds.

Understanding the nano-topography changes and cellular influences resulting from the surface adsorption of human hair keratins

Recent interest in the use of human hair keratins as a biomaterial has grown, fuelled by improvements in keratin extraction methods and better understanding of keratin bioactivity. The use of keratins as a bioactive coating for in vitro cell culture studies is an attractive proposition. In this light, the surface adsorption of human hair keratins onto tissue culture polystyrene surfaces has been investigated. Keratin density, nano-topography and hydrophobicity of keratin coated surfaces were characterized. To understand the cellular influence of these coated surfaces, murine L929 fibroblasts were cultured on them and evaluated for cytotoxicity, proliferation, metabolic activity and detachment behaviors compared to collagen type 1 coated surfaces. Keratins were deposited up to a density of 650 ng/cm(2) when a coating concentration of 80 μg/ml or higher was used. The surface features formed by adsorbed keratins also changed in a coating concentration dependent manner. These surfaces improved L929 mouse fibroblast adhesion and proliferation in comparison to uncoated and collagen type 1 coated tissue culture polystyrene. Furthermore, the expression of fibronectin was accelerated on surfaces coated with solutions of higher keratin concentrations. These results suggest that human hair keratins can be used as a viable surface coating material to enhance substrate compliance for culturing cells.

Modulation of alignment, elongation and contraction of cardiomyocytes through a combination of nanotopography and rigidity of substrates

The topographic and mechanical characteristics of engineered tissue constructs, simulating native tissues, should benefit tissue engineering. Previous studies reported that surface topography and substrate rigidity provide biomechanical cues to modulate cellular responses such as alignment, migration and differentiation. To fully address this issue, the present study aimed to examine the influence of nanogrooved substrates with different stiffnesses on the responses of rat cardiomyocytes. Nanogrooved substrates (450nm in groove/ridge width; 100 or 350nm in depth) made of polystyrene and polyurethane were prepared by imprinting from polydimethylsiloxane molds. The morphology and orientation of cardiomyocytes attached to the substrates were found to be influenced mainly by the nanogrooved structures, while the contractile function of the cells was regulated by the coupled effect of surface topography and substrate stiffness. The distribution of intracellular structural proteins such as vinculin and F-actin showed that the surface topography and substrate stiffness regulated the organization of the actin cytoskeleton and focal adhesion complexes, and consequently the contractile behavior of the cardiomyocytes. The beating rates of the cultured cardiomyocytes were dependent on both the surface topography and the substrate stiffness. The study provides insights into the interaction between cardiomyocytes and biomaterials, and benefits cardiac tissue engineering.

Protein Expression of STRO-1 Cells in Response to Different Topographic Features

Human skeletal stem cells (STRO-1 positive) display distinct responses to different topographical features. On a flat surface, skeletal cells spread, and in vitro, they typically display a polarized, fibroblast-like morphology. However, on microgrooved surfaces, these cells prefer to stretch along the grooves forming a similar morphology to in vivo, bipolarized fibroblasts. In contrast, on nanopits, these cells display a polygonal and osteoblastic phenotype. We have examined mechanotransduction events of STRO-1 positive in response to fibroblastic, microgrooved and osteogenic, controlled disorder nanopit, topographies using proteomics after 3 days in culture. Protein expression profiles were analyzed by difference gel electrophoresis to identify proteins that showed modulation of expression in response to different topographic features to assess early decision events in these cells on these discrete topographies. After only 72 hours in culture, STRO-1 positive displayed differential regulations of families of proteins involved in cell migration and proliferation. The current study indicated that osteogenic decision specific events had already occurred. Runx2 was localized in nuclei of the skeletal stem cells on the osteogenic nanopits; however, few signaling pathway changes were observed. This study demonstrated that micro- and nanotopographies activated skeletal stem cells at different times and with distinct mechanotransduction profiles.

Biomimetic microtopography to enhance osteogenesis in vitro

Biomimicry is being used in the next generation of biomaterials. Tuning material surface features such as chemistry, stiffness and topography allow the control of cell adhesion, proliferation, growth and differentiation. Here, microtopographical features with nanoscale depths, similar in scale to osteoclast resorption pits, were used to promote in vitro bone formation in basal medium. Primary human osteoblasts were used to represent an orthopaedically relevant cell type and analysis of adhesions, cytoskeleton, osteospecific proteins (phospho-Runx2 and osteopontin) and mineralisation (alizarin red) was performed. The results further demonstrate the potential for biomimicry in material design and show that the osteoblast response can be tuned from changes in feature size.

The development of anisotropic behaviours of 3T3 fibroblasts on microgrooved patterns

3T3 fibroblasts cultured on microgrooved polydimethylsiloxane (PDMS) surfaces of two different widths (25 μm and 55 μm) were individually tracked using confocal microscopy with a novel live-cell staining technique over several hours without noticeable cytotoxic effects. By quantifying the cell morphology, orientation, and migration over time, we identified the timescale (about 2-4 h after seeding) over which cell behaviours transitioned from isotropy to anisotropy, where the preference is in the direction parallel to the pattern. The development of anisotropy occurred more rapidly and distinctly when a narrower ridge width was used, suggesting that it is the ridge width that imposed a physical barrier on the cells' morphology and motility. Furthermore, while we found a weak but statistically significant correlation between cell orientation and morphology on the single-cell level, there is a lack of correlation on the same level between cell orientation and migratory direction. This suggests that while morphology and migration are affected anisotropically by topographical patterns in a similar way, the underlying processes giving rise to the anisotropy is slightly different in the two cases.

Topography, cell response, and nerve regeneration

In the body, cells encounter a complex milieu of signals, including topographical cues, in the form of the physical features of their surrounding environment. Imposed topography can affect cells on surfaces by promoting adhesion, spreading, alignment, morphological changes, and changes in gene expression. Neural response to topography is complex, and it depends on the dimensions and shapes of physical features. Looking toward repair of nerve injuries, strategies are being explored to engineer guidance conduits with precise surface topographies. How neurons and other cell types sense and interpret topography remains to be fully elucidated. Studies reviewed here include those of topography on cellular organization and function as well as potential cellular mechanisms of response.

Modulation of alignment and differentiation of skeletal myoblasts by submicron ridges/grooves surface structure

Alignment and fusion of myoblasts into parallel arrays of multinucleated myotubes are critical in skeletal muscle tissue engineering. It is well known that contact guidance by grooves/ridges structures induces myoblasts to align and to migrate along the anisotropic direction. In this study, two series of grooved substrata with different widths (450 and 900 nm) and different depths (100, 350, and 550 nm) were studied on their effects on myoblast adhesion, proliferation, and differentiation into myotubes. We found that C2C12 cells were aligned and elongated along the direction of grooves. Groove depth was more influential on cellular morphology, proliferation, and differentiation than groove width. While cell proliferation was retarded on the grooved surfaces especially on the substrate with 900/550 nm (width/depth), differentiation was also enhanced on the patterned surfaces compared to the flat control. Our results demonstrated the potential of grooved substrata with submicron scale in skeletal muscle tissue engineering.

Microtopographically patterned surfaces promote the alignment of tenocytes and extracellular collagen

This paper investigates the role of microtopographical features on the cytomorphology, alignment, proliferation and gene expression of tenocytes. We made use of simple microfabrication approaches to create surfaces patterned with topographical features suitable for in vitro studies of tenocytes. These surfaces were composed of glass substrates patterned with polymeric ridges spaced from 50 to 250 microm apart. Our studies demonstrate that the microgrooves differentially impact tenocyte shape, alignment and matrix organization along the direction of grooves. Groove widths significantly influenced cellular alignment, with 50 microm grooved patterns affecting alignment most substantially. Polarized light microscopy demonstrated that mature collagen fibers were denser and more oriented within 50 microm patterns. None of the patterns had a significant effect on the expression of genes linked to proliferation or extracellular matrix synthesis, although time in culture profoundly influenced both gene groups. COMP mRNA expression was moderately increased in tenocytes seeded onto 250 microm grooves, but there was no overall beneficial phenotypic effect of aligned growth. The results of this study indicate that microtopography affects cell density and alignment of tenocytes and leads to the deposition of an aligned collagen matrix, but does not significantly impact matrix gene expression or cell phenotype. These outcomes provide insights into the biology of tendon regeneration, thus providing guidance in the design of clinical procedures for tendon repair.

Biocompatibility of osteogenic predifferentiated human cord blood stem cells with biomaterials and the influence of the biomaterial on the process of differentiation

Modern cell-based bone reconstruction therapies offer new therapeutic opportunities and tissue engineering represents a more biological-oriented approach to heal bone defects of the skeleton. Human unrestricted somatic stem cells (USSCs) derived form umbilical cord blood offer new promising aspects e.g., can differentiate into osteogenetic cells. Furthermore these cells have fewer ethical and legal restrictions compared to embryonic stem cells (ESCs). The purpose of this study was to evaluate the compatibility of osteogenic pre-differentiated USSCs with various biomaterials and to address the question, whether biomaterials influence the process of differentiation of the USSCs. After osteogenic differentiation with DAG USSCs were cultivated with various biomaterials. To asses the biocompatibility of USSCs the attachment and the proliferation of the cells on the biomaterial were measured by a CyQUANT(®) assay, the morphology was analyzed by scanning electron microscopy and the influence of the gene expression was analyzed by real time PCR. Our results provide evidence that insoluble collagenous bone matrix followed by β-tricalciumphosphate is highly suitable for bone tissue engineering regarding cell attachment and proliferation. The gene expression analysis indicates that biomaterials influence the gene expression of USSCs. These results are in concordance with our previous study with ESCs.

Quantitative analysis of osteoblast-like cells (MG63) morphology on nanogrooved substrata with various groove and ridge dimensions

Nanotextured silicon substrata with parallel ridges separated by grooves with equal width from 90 to 500 nm, were fabricated by electron beam lithography and dry etching techniques. Osteoblast-like cells, MG-63, were cultured on the sterilized nanopatterned substrata for 4 or 24 h, and then imaged by scanning electron microscopy. The influence of substrate topography on cell morphology was analyzed by image software. We found the initially cells spread faster on the nanopatterned surfaces than on the flat surface, suggesting that surface anisotropic feature facilitates initial cell extension along its direction. However, because of inhibition of cell lateral expansion across nanogrooved surfaces, the cells on the nanogrooved surface did not further expand laterally, and cell spreading area was less than that on the flat surface after 24 h of incubation. Cells elongated and aligned along the direction of grooves on all the nanopatterned substrata. Furthermore, fluorescence staining of cell nuclei indicated that the nuclei of the cells cultured on the nanopatterned surfaces also displayed a more elongated and aligned morphology along the direction of the grooves. Since cell shape and orientation influence cell functions and alignment of extracellular matrix secreted by cells, our results may provide the information regarding responses of osteoblasts to the nanostructure of collagen fibrils, and benefit bone tissue engineering and surface design of orthopedic implants.

The procoagulant properties of hyaluronic acid-collagen (I)/chitosan complex film

Biomaterial-induced human platelet activation remains one of the most crucial factors to determine the procoagulant properties of the biomaterial. In this experiment, a new type of biomacromolecule complex film (hyaluronic acid-collagen (I)/chitosan, HCC) was prepared using the electrostatic self-assembly method. Then the procoagulant properties of this complex film were characterized. Based on the nano-resolution of atomic force microscopy, the platelet-derived microparticles (PMPs) that present the activation of platelets were clearly visualized on the membrane surface of platelets for the first time, and the measurement indicated that the size of PMPs is around 50-110 nm. Furthermore, the results of AFM measurement were confirmed by flow cytometry analysis. The expression of CD62P (P-selectin) dramatically increased after the platelet-rich plasma interacted with the biomaterial solution. From the results, we could draw the conclusion that this biomacromolecule complex film has promising procoagulant properties, and has the potential to be practically used as procoagulant material.

Directional change produced by perpendicularly-oriented microgrooves is microtubule-dependent for fibroblasts and epithelium

Anisotropic substrata such as micromachined grooves can control cell shape, orientation, and the direction of cell movement, a phenomena termed topographic guidance. Although many types of cells exhibit topographic guidance, little is known regarding cell responses to conflicting topographic cues. We employed a substratum with intersecting grooves in order to present fibroblasts and epithelial cells with conflicting topographic cues. Using time-lapse and confocal microscopy, we examined cell behavior at groove intersections. Migrating fibroblasts and epithelial cells typically extended a cell process into the intersection ahead of the cell body. After travelling along the "X" groove to enter the intersection, the leading lamellipodia of the cell body encountered the perpendicular "Y" groove, and spread latterly along the "Y" groove. The formation of lateral lamellipodia resulted in cells forming "T" or "L" morphologies, which were characterized by the formation of phosphotyrosine-rich focal adhesions at the leading edges. The "Y" groove did not prove an absolute barrier to cell migration, particularly for epithelial cells. Analysis of cytoskeletal distribution revealed that F-actin bundles did not adapt closely to the groove patterns, but typically did align to either the "X" or "Y" grooves. In contrast microtubules (MT) adapted closely to the walls. Inhibition of microtubule nucleation attenuated fibroblast and epithelial cell orientation within the intersection of the perpendicular grooves. We conclude that MT may be the prime determinant of fibroblast and epithelial cell conformation to conflicting topographies.

Cytoskeletal role in differential adhesion patterns of normal fibroblasts and breast cancer cells inside silicon microenvironments

In this paper we studied differential adhesion of normal human fibroblast cells and human breast cancer cells to three dimensional (3-D) isotropic silicon microstructures and investigated whether cell cytoskeleton in healthy and diseased state results in differential adhesion. The 3-D silicon microstructures were formed by a single-mask single-isotropic-etch process. The interaction of these two cell lines with the presented microstructures was studied under static cell culture conditions. The results show that there is not a significant elongation of both cell types attached inside etched microstructures compared to flat surfaces. With respect to adhesion, the cancer cells adopt the curved shape of 3-D microenvironments while fibroblasts stretch to avoid the curved sidewalls. Treatment of fibroblast cells with cytochalasin D changed their adhesion, spreading and morphology and caused them act similar to cancer cells inside the 3-D microstructures. Statistical analysis confirmed that there is a significant alteration (P < 0.001) in fibroblast cell morphology and adhesion property after adding cytochalasin D. Adding cytochalasin D to cancer cells made these cells more rounded while there was not a significant alteration in their adhesion properties. The distinct geometry-dependent cell-surface interactions of fibroblasts and breast cancer cells are attributed to their different cytoskeletal structure; fibroblasts have an organized cytoskeletal structure and less deformable while cancer cells deform easily due to their impaired cytoskeleton. These 3-D silicon microstructures can be used as a tool to investigate cellular activities in a 3-D architecture and compare cytoskeletal properties of various cell lines.

Fibronectin modulates the morphology of osteoblast-like cells (MG-63) on nano-grooved substrates

Cell interactions with biomaterials are affected by surface topographic and chemical cues. Although it is well-known that nanometrical grooves/ridges structure modulates cellular spreading, elongation, and alignment, the combinational influence of surface topographic and chemical cues is not well studied. In this study, nano-textured silicon substrata with parallel ridges of 90, 250, or 500 nm wide, separated by grooves with equal width, were fabricated by electron beam lithography and dry etching techniques. Osteoblast-like cells, MG-63, were cultured on the patterned substrata with or without pre-adsorption of fibronectin. The cell morphology was imaged by scanning electron microscopy, and analyzed by image software. We found that FN coating initially modulated cellular spreading, length, and orientation on all types of grooved surfaces. However, after 24 h of culture, the cell morphology was not affected by FN coating on the 250-nm and 500-nm surfaces, while FN decreased cell alignment on the 90-nm surfaces. Our results suggest that surface chemical cues influence the initial cell-substratum contact, while the long-term cellular morphology is dictated by surface topographic cues.

Modulation of morphology and functions of human hepatoblastoma cells by nano-grooved substrata

It is known that cellular behavior is affected by nano-patterned topography. For example, many cell types tend to align and extend along the direction of nano-grooves/ridges structures. In this study, we investigated the impact of nano-grooves/ridges on hepatocyte morphology and functions. HepG2/C3A (C3A) cells were cultured on nano-grooved silicon or polystyrene substrata with various widths (from 100 to 500 nm) and depths (from 100 to 380 nm). Nano-grooved substrates induced dramatic changes in C3A cell morphology. The cells formed spheroids on the flat substrates, while C3A cells spread and grew confluently with elongated and aligned morphology along the nano-grooves/ridges. Albumin synthesis was enhanced on the nano-grooved silicon substrates compared to the flat surface, and was decreased with increasing groove depths. Urea conversion on the shallow grooves (400 nm wide and 100 nm deep) remained at the same level of that on the flat surfaces, but was decreased on the deeper grooves. We found that the functions of hepatocytes were enhanced on the substrates with shallow grooves. The nano-grooved substrates may be applied as in vitro culture systems of hepatocytes for both diagnostic and therapeutic applications.

Differential in-gel electrophoresis (DIGE) analysis of human bone marrow osteoprogenitor cell contact guidance

We have used a recent comparative proteomics technique, differential in-gel electrophoresis (DIGE), to study osteoprogenitor cell response to contact guidance in grooves. In order to increase protein output from small sample sizes, we used bioreactor culture before protein extraction and gel electrophoresis. Mass spectroscopy was used for protein identification. A number of distinct proteins were observed to exhibit significant changes in expression. These changes in protein expression suggest that the cells respond to tailored grooved topographies, with alterations in their proteome concurrent with changes in osteoprogenitor phenotype.

Cell-generated forces influence the viability, metabolism and mechanical properties of fibroblast-seeded collagen gel constructs

The aim of this study was to investigate the influence of the endogenous forces generated by fibroblast-mediated contraction, using four individual collagen gel models that differed with respect to the ability of the cells to contract the gel. Human neonatal dermal fibroblasts were seeded in type I collagen and the gels were cast in a racetrack-shaped mould containing a removable central island. Two of the models were mechanically stressed (20 mm and 10 mm), as complete contraction was prevented by the presence of a central island. The central island was removed in the third model (released) and the final model was cast in a Petri dish and detached, allowing full multi-axial contraction (SR). Cell viability was maintained in the 10 mm, released and SR models over a 6 day culture period but localized regions of cell death were evident in the 20 mm model. Cell and collagen alignment was developed in the 20 mm and 10 mm models and to a lesser extent in the released model, but was absent in the SR model. Cell proliferation and collagen synthesis was lower in the 20 mm model compared to the other systems and there was evidence of enhanced matrix metalloproteinase production. The mechanical properties of the 20 mm model system were inferior to the 10 mm and released systems. The 10 mm model system induced a high level of cell and matrix orientation and may, therefore, represent the best option for tissue-engineered ligament repair involving an orientated fibroblast-seeded collagen gel.