Structural Color Materials for Optical Anticounterfeiting

Programmable multimode optical encryption of advanced printable security inks by integrating structural color with Down/Up- conversion photoluminescence

Optical information encryption with high encoding capacities can significantly boost the security level of anti-counterfeiting in the scenario of guaranteeing the authenticity of a wide scope of common and luxury goods. In this work, a novel counterfeiting material with high-degree complexity is fabricated by microencapsulating cholesteric liquid crystals and triplet-triplet annihilation upconversion fluorophores to integrate structural coloration with fluorescence and upconversion photoluminescence. Moreover, the multimode security ink presents tailorable optical behaviors and programmable abilities on flexible substrates by various printing techniques, which offers distinct information encryption under different optical modes. The advanced strategy provides a practical versatile platform for high-secure-level multimode optical inks with largely enhanced encoding capacities, programmability, printability, and cost-effectiveness, which manifests enormous potentials for information encryption and anti-counterfeiting technology.

Multifunctional photonic microobjects with asymmetric response in radial direction and their anticounterfeiting performance

There are few explorations that have integrated multiple properties into photonic microobjects in a facile and controlled manner. In this work, we present a straightforward method to integrate different functions into individual photonic microobject. Droplet-based microfluidics was used to produce uniform droplets of an aqueous dispersion of monodispersed SiO2 nanoparticles (NPs). The droplets evolved into opal-structured photonic microballs upon complete evaporation of water. After infiltration of an aqueous solution of acrylamide (AAm) and acrylic acid (AAc) monomers into the interstices among SiO2 NPs, opal-structured SiO2 NPs/pAAm-co-AAc hydrogel composite photonic microballs were obtained upon UV irradiation. Afterwards, a wet etching process was introduced to etch the microballs in a controlled manner, yielding individual photonic microball composed of an SiO2 NPs/pAAm-co-AAc composite opal core and a neat pAAm-co-AAc shell. The pendant carboxylic acid groups in the skeleton of the hydrogel matrix were further utilized to react with positively charged compounds, such as Ruthenium compound containing fluorescent polymers. The resulting photonic microobjects eventually featured with localized stimulus-responsive properties and multiple colors under different modes. The multifunctional photonic microobjects were discovered to have fivefold of anticounterfeiting properties when used as building blocks for anticounterfeiting structures and may have other potential applications.

Ethanol-responsive structural colors with multi-level information encryption based on the patterned three-layer inverse opal photonic crystal

Stimulus-responsive inverse opal photonic crystals (IOPCs) with tunable structural colors show significant promise in information security. To improve upon the traditional bilayer structure with limited color information and single decoding mode, this work developed an ethanol-responsive structure with multi-level information encryption ability by inserting a functional layer into two shielding layers (red Layer A with a photonic stop band (PSB) at 640 nm and green Layer C with a PSB at 530 nm). The functional layer was composed of colorless Layer B, a quick response (QR) code pattern made of TiO2 nanoparticles, and a dense polymer. Due to the isolation of distinct layers, different reflectance values, and different PSB positions of the three-layer IOPC, the structural color of Layer B could only be "turned on" by wetting the entire structure when its PSB redshifted from 360 nm to 460 nm. Specifically, when either side was individually wetted, the PSB of Layer A or C redshifted to 825 nm or 685 nm, and the color of the QR code was dominated by the unwetted red or green layer. After the entire structure had been soaked, the blue QR code was decoded. Meanwhile, when the detecting angle increased from 5° to 60°, the PSBs of Layers B and C in the wetted three-layer IOPC blueshifted from 460 nm to 365 nm and from 685 nm to 540 nm, respectively, which resulted in a cascade decoding process with a single- or mixed-color output. This structure provides a good foundation for multi-level information encryption.

Emergent Properties from Three-Dimensional Assemblies of (Nano)particles in Confined Spaces

The assembly of (nano)particles into compact hierarchical structures yields emergent properties not found in the individual constituents. The formation of these structures relies on a profound knowledge of the nanoscale interactions between (nano)particles, which are often designed by researchers aided by computational studies. These interactions have an effect when the (nano)particles are brought into close proximity, yet relying only on diffusion to reach these closer distances may be inefficient. Recently, physical confinement has emerged as an efficient methodology to increase the volume fraction of (nano)particles, rapidly accelerating the time scale of assembly. Specifically, the high surface area of droplets of one immiscible fluid into another facilitates the controlled removal of the dispersed phase, resulting in spherical, often ordered, (nano)particle assemblies. In this review, we discuss the design strategies, computational approaches, and assembly methods for (nano)particles in confined spaces and the emergent properties therein, such as trigger-directed assembly, lasing behavior, and structural photonic color. Finally, we provide a brief outlook on the current challenges, both experimental and computational, and farther afield application possibilities.

Preparation of thermochromic ink from anthocyanidin-encapsulated alginate nanoparticles for anticounterfeiting applications

In order to make commercial products less vulnerable to counterfeiting, thermochromic inks have proven to be a viable authentication strategy. Herein, we developed a thermochromic ink for authentication by combining an anthocyanidin (ACYD) extract with alginate (ALG). To increase the anthocyanidin/alginate ink stability, a mordant (ferrous sulfate) was employed to tie up the anthocyanidin biomolecules with alginate. ACYD was extracted from red-cabbage and then immobilized into alginate to serve as an environmentally friendly spectroscopic probe. Thermochromic composite inks (ACYD@ALG) were made by adjusting the content of anthocyanidin. A homogenous blue film (608 nm) was printed on a paper surface and investigated by the CIE Lab coordinate system. The blue color transformed into reddish (477 nm) when heated from 35°C to 65°C. Nanoparticles (NPs) of anthocyanidin/mordant (ACYD/M) were examined for their size and morphology to indicate diameters of 80-90 nm, whereas the ACYD/M-encapsulated alginate nanoparticles showed diameters of 120-150 nm. Multiple analytical techniques were utilized to examine the printed papers. The mechanical and rheological performance of both stamped sheets and ink fluid were explored. The cytotoxicity and antimicrobial efficacy of ink (ACYD@ALG) were investigated.

TiO2 Films with Macroscopic Chiral Nematic-Like Structure Stabilized by Copper Promoting Light-Harvesting Capability for Hydrogen Generation

Cellulose nanocrystals (CNCs) have inspired the synthesis of various advanced nanomaterials, opening opportunities for different applications. However, a simple and robust approach for transferring the long-range chiral nematic nanostructures into TiO2 photocatalyst is still fancy. Herein, a successful fabrication of freestanding TiO2 films maintaining their macroscopic chiral nematic structures after removing the CNCs biotemplate is reported. It is demonstrated that including copper acetate in the sol avoids the epitaxial growth of the lamellar-like structure of TiO2 and stabilizes the chiral nematic structure instead. The experimental results and optical simulation demonstrate an enhancement at the blue and red edges of the Fabry-Pérot reflectance peak located in the visible range. This enhancement arises from the light scattering effect induced by the formation of the chiral nematic structure. The nanostructured films showed 5.3 times higher performance in the photocatalytic hydrogen generation, compared to lamellar TiO2, and benefited from the presence of copper species for charge carriers' separation. This work is therefore anticipated to provide a simple approach for the design of chiral nematic photocatalysts and also offers insights into the electron transfer mechanisms on TiO2/CuxO with variable oxidation states for photocatalytic hydrogen generation.

Physical Unclonable Functions with Hyperspectral Imaging System for Ultrafast Storage and Authentication Enabled by Random Structural Color Domains

Physical unclonable function (PUF) is attractive in modern encryption technologies. Addressing the disadvantage of slow data storage/authentication in optical PUF is paramount for practical applications but remains an on-going challenge. Here, a highly efficient PUF strategy based on random structural color domains (SCDs) of cellulose nanocrystal (CNC) is proposed for the first time, combing with hyperspectral imaging system (HIS) for ultrafast storage and authentication. By controlling the growth and fusion behavior of the tactoids of CNC, the SCDs display an irregular and random distribution of colors, shapes, sizes, and reflectance spectra, which grant unique and inherent fingerprint-like characteristics that are non-duplicated. Based on images and spectra, these fingerprint features are used to develop two sets of PUF key generation methods, which can be respectively authenticated at the user-end and the manufacturer-front-end that achieving a high coding capacity of at least 22304. Notably, the use of HIS greatly shortens the time of key reading and generation (≈5 s for recording, 0.5-0.7 s for authentication). This new optical PUF labels can not only solve slow data storage and complicated authentication in optical PUF, but also impulse the development of CNC in industrial applications by reducing color uniformity requirement.

Recent advances in photoresponsive printing inks for security encoding applications

Counterfeiting of banknotes, important documents, and branded goods continues to be a major worldwide problem for governments, businesses, and consumers. This problem has serious financial, security, and health implications. Due to their stability for printing on various substrates, the photochromic anticounterfeiting inks have received important interest. There have been various photochromic agents, such as polymer nanoparticles, quantum and carbon dots, and organic and inorganic fluorophores and luminophores, which have been broadly used for antiforging applications. In comparison to organic agents, inorganic photochromic materials have better stability under reversible/long-term light illumination. Recently, the remarkable optical characteristics and chemical stability of photoluminescent and photochromic agents have led to their extensive usage anticounterfeiting products. There have been also several strategies to tackle the rising problem of counterfeiting. Both of solvent-based and water-based inks have been developed for security encoding purposes. Additionally, the printing methods, including screen printing, labeling, stamping, inkjet printing, and handwriting, that have been used to apply anticounterfeiting inks onto various surfaces are discussed. The limitations of photoluminescent and photochromic agents and the potential for their future preparation to combat counterfeiting were discussed. This review would benefit academic researchers and industrial developers who are interested in the area of security printing.

Facile Access to High Solid Content Monodispersed Microspheres via Dual-Component Surfactants Regulation toward High-Performance Colloidal Photonic Crystals

Monodispersed microspheres play a major role in optical science and engineering, providing ideal building blocks for structural color materials. However, the method toward high solid content (HSC) monodispersed microspheres has remained a key hurdle. Herein, a facile access to harvest monodispersed microspheres based on the emulsion polymerization mechanism is demonstrated, where anionic and nonionic surfactants are employed to achieve the electrostatic and steric dual-stabilization balance in a synergistic manner. Monodispersed poly(styrene-butyl acrylate-methacrylic acid) colloidal latex with 55 wt% HSC is achieved, which shows an enhanced self-assembly efficiency of 280% compared with the low solid content (10 wt%) latex. In addition, Ag-coated colloidal photonic crystal (Ag@CPC) coating with near-zero refractive index is achieved, presenting the characteristics of metamaterials. And an 11-fold photoluminescence emission enhancement of CdSe@ZnS quantum dots is realized by the Ag@CPC metamaterial coating. Taking advantage of high assembly efficiency, easily large-scale film-forming of the 55 wt% HSC microspheres latex, robust Ag@CPC metamaterial coatings could be easily produced for passive cooling. The coating demonstrates excellent thermal insulation performance with theoretical cooling power of 30.4 W m-2, providing practical significance for scalable CPC architecture coatings in passive cooling.

Metal-organic framework photonic crystals with bidisperse particles-based brilliant structural colors and high optical transparency for elaborate anti-counterfeiting

Photonic crystals (PCs) have attracted great interest and wide applications in displays, printing, anti-counterfeiting, etc. However, two main challenges significantly hinder their applications: 1) the tradeoff between high optical transparency across the whole visible range and brilliant colors requiring a large refractive index contrast (Δn), and 2) the way of regulating structural colors by altering tens of different sizes. To address these issues, a new type of metal-organic framework (MOF)-based transparent photonic crystal (TPC) has been fabricated through self-assembling MOF particles into three-dimensional ordered structures which were then infiltrated by polydimethylsiloxane (PDMS). Compared to conventional PCs, these TPCs exhibit 1) both brilliant forward iridescent structural colors and high transmittance (>75 %) across the whole visible spectra range, and 2) conveniently adjustable colors based on bidisperse particles. The unique color-generating mechanism of the light diffraction by each plane lattice and the small Δn between MOF particles and PDMS are the keys to TPCs' characteristics. Moreover, the prepared invisible anti-counterfeit labels can reversibly hide-reveal patterns with elaborate and exchangeable color contrast in a non-destructive way, showing potential applications in anti-counterfeiting, information encryption, and optical devices.

Liquid Crystalline Network Microstructures for Stimuli Responsive Labels with Multi-Level Encryption

Two-photon direct laser writing enables the fabrication of shape-changing microstructures that can be exploited in stimuli responsive micro-robotics and photonics. The use of Liquid Crystalline Networks (LCN) allows to realize 3D micrometric objects that can contract along a specific direction in response to stimuli, such as temperature or light. In this paper, the fabrication of free-standing LCN microstructures is demonstrated as graphical units of a smart tag for simple physical and optical encryption. Using an array of identical pixels, information can be hidden to the observer and revealed only upon application of a specific stimulus. The reading mechanism is based on the shape-change of each pixel under stimuli and their color that combine together in a two-level encryption label. Once the stimulus is removed, the pixels recover their original shape and the message remains completely hidden. Therefore, an opto-mechanical equivalent of an "invisible ink" is realized. This new concept paves the way for introducing enhanced functionalities in smart micro-systems within a single lithography step, spanning from storage devices with physical encryption to complex motion actuators.

Fine Optimization of Colloidal Photonic Crystal Structural Color for Physically Unclonable Multiplex Encryption and Anti-Counterfeiting

Robust anti-counterfeiting techniques aim for easy identification while remaining difficult to forge, especially for high-value items such as currency and passports. However, many existing anti-counterfeiting techniques rely on deterministic processes, resulting in loopholes for duplication and counterfeiting. Therefore, achieving high-level encryption and easy authentication through conventional anti-counterfeiting techniques has remained a significant challenge. To address this, this work proposes a solution that combined fluorescence and structural colors, creating a physically unclonable multiplex encryption system (PUMES). In this study, the physicochemical properties of colloidal photonic inks are systematically adjusted to construct a comprehensive printing phase diagram, revealing the printable region. Furthermore, the brightness and color saturation of inkjet-printed colloidal photonic crystal structural colors are optimized by controlling the substrate's hydrophobicity, printed droplet volume, and the addition of noble metals. Finally, fluorescence is incorporated to build PUMES, including macroscopic fluorescence and structural color patterns, as well as microscopic physically unclonable fluorescence patterns. The PUMES with intrinsic randomness and high encoding capacity are authenticated by a deep learning algorithm, which proved to be reliable and efficient under various observation conditions. This approach can provide easy identification and formidable resistance against counterfeiting, making it highly promising for the next-generation anti-counterfeiting of currency and passports.

Photorewriting, Time-Resolved Encryption, and Unclonable Anticounterfeiting with Artificial Intelligence Authentication via a Reversible Photoswitchable System

In the fields of photolithographic patterning, optical anticounterfeiting, and information encryption, reversible photochromic materials with solid-state fluorescence are emerging as a potential class of systems. A design strategy for reversible photochromic materials has been proposed and synthesized through the introduction of photoactive thiophene groups into the molecular backbone of aryl vinyls, compounds with unique aggregation-induced emission properties, and solid-state reversible photocontrollable fluorescence and color-changing properties. This work develops novel photochromic inks, films, and cellulose hydrogels for enhancing the security of information encryption and anticounterfeiting technologies. They achieve rapid and reversible color change under ultraviolet light irradiation. Dependent upon the rate of color change, higher levels of time-resolved security can be achieved. This feature is important for enhancing the confidentiality of encrypted information and the reliability of security labels. Color-changing cellulose hydrogels, inks, and films consisting of three photochromic fluorescent molecules have quick photoactivity, great photoreversibility and photostability, and good processability, making them ideal for time-delayed anticounterfeiting and smart encryption. Furthermore, specialized algorithms are used to construct convolutional neural networks, and image analysis is performed on these systems, thus solving the current problem of the time-consuming information decryption process. This artificial intelligence method offers new opportunities for enhanced data encryption.

Uncovering the Recent Progress of CNC-Derived Chirality Nanomaterials: Structure and Functions

Cellulose nanocrystal (CNC), as a renewable resource, with excellent mechanical performance, low thermal expansion coefficient, and unique optical performance, is becoming a novel candidate for the development of smart material. Herein, the recent progress of CNC-based chirality nanomaterials is uncovered, mainly covering structure regulations and function design. Undergoing a simple evaporation process, the cellulose nanorods can spontaneously assemble into chiral nematic films, accompanied by a vivid structural color. Various film structure-controlling strategies, including assembly means, physical modulation, additive engineering, surface modification, geometric structure regulation, and external field optimization, are summarized in this work. The intrinsic correlation between structure and performance is emphasized. Next, the applications of CNC-based nanomaterials is systematically reviewed. Layer-by-layer stacking structure and unique optical activity endow the nanomaterials with wide applications in the mineralization, bone regeneration, and synthesis of mesoporous materials. Besides, the vivid structural color broadens the functions in anti-counterfeiting engineering, synthesis of the shape-memory and self-healing materials. Finally, the challenges for the CNC-based nanomaterials are proposed.

Multilevel Information Encryption Based on Thermochromic Perovskite Microcapsules via Orthogonal Photic and Thermal Stimuli Responses

Increasing modal variations of stimulus-responsive materials ensure the high capacity and confidentiality of information storage and encryption systems that are crucial to information security. Herein, thermochromic perovskite microcapsules (TPMs) with dual-variable and quadruple-modal reversible properties are designed and prepared on the original oil-in-fluorine (O/F) emulsion system. The TPMs respond to the orthogonal variations of external UV and thermal stimuli in four reversible switchable modes and exhibit excellent thermal, air, and water stability due to the protection of perovskites by the core-shell structure. Benefiting from the high-density information storage TPMs, multiple information encryptions and decryptions are demonstrated. Moreover, a set of devices are assembled for a multilevel information encryption system. By taking advantage of TPMs as a "private key" for decryption, the signal can be identified as the corresponding binary ASCII code and converted to the real message. The results demonstrate a breakthrough in high-density information storage materials as well as a multilevel information encryption system based on switchable quadruple-modal TPMs.

Polymer Network Film with Double Reflection Bands Prepared Using a Thermochromic Cholesteric Liquid Crystal Mixture

Cholesteric liquid crystal polymer network (CLCN) films with a single reflection band have found applications for decoration and anticounterfeiting. The CLCN films with double reflection bands were more suitable for these applications. Herein, they were prepared by using thermochromic cholesteric liquid crystals (CLCs) through a two-step photopolymerization approach. At the first step, due to oxygen inhibition, the CLC monomers near the substrate surface were polymerized at a certain temperature. At the second step, those near the air were polymerized at another temperature. The wavelengths of these two reflection bands of the CLCN film were dominated by the two polymerization temperatures. Based on this approach, patterns with composite colors were prepared, which were suitably applied for decoration. Moreover, a double-layered CLCN film with a broad reflection band was prepared that could potentially be applied for displays.

Rewritable Photoluminescence and Structural Color Display for Dual-Responsive Optical Encryption

Optical encryption using coloration and photoluminescent (PL) materials can provide highly secure data protection with direct and intuitive identification of encrypted information. Encryption capable of independently controlling wavelength-tunable coloration as well as variable light intensity PL is not adequately demonstrated yet. Herein, a rewritable PL and structural color (SC) display suitable for dual-responsive optical encryption developed with a stimuli-responsive SC of a block copolymer (BCP) photonic crystal (PC) with alternating in-plane lamellae, of which a variety of 3D and 2D perovskite nanocrystals is preferentially self-assembled with characteristic PL, is presented. The SC of a BCP PC is controlled in the visible range with different perovskite precursor doping times. The perovskite nanocrystals developed in the BCP PC are highly luminescent, with a PL quantum yield of ≈33.7%, yielding environmentally stable SC and PL dual-mode displays. The independently programmed SC and PL information is erasable and rewritable. Dual-responsive optical encryption is demonstrated, in which true Morse code information is deciphered only when the information encoded by SCs is properly combined with PL information. Numerous combinations of SC and PL realize high security level of data anticounterfeiting. This dual-mode encryption display offers novel optical encryption with high information security and anti-counterfeiting.

Scalable production of structurally colored composite films by shearing supramolecular composites of polymers and colloids

Structurally colored composite films, composed of orderly arranged colloids in polymeric matrix, are emerging flexible optical materials, but their production is bottlenecked by time-consuming procedures and limited material choices. Here, we present a mild approach to producing large-scale structurally colored composite films by shearing supramolecular composites composed of polymers and colloids with supramolecular interactions. Leveraging dynamic connection and dissociation of supramolecular interactions, shearing force stretches the polymer chains and drags colloids to migrate directionally within the polymeric matrix with reduced viscous resistance. We show that meter-scale structurally colored composite films with iridescence color can be produced within several minutes at room temperature. Significantly, the tunability and diversity of supramolecular interactions allow this shearing approach extendable to various commonly-used polymers. This study overcomes the traditional material limitations of manufacturing structurally colored composite films by shearing method and opens an avenue for mildly producing ordered composites with commonly-available materials via supramolecular strategies.

Poly(4-vinylpyridine) and Poly(methacrylic acid) Particle Architectures for pH-Responsive and Mechanochromic Opal Films

While stimuli-responsive structural colors are commonly found in nature, mimicking these in artificial materials is challenging. Dynamically switchable and tunable coloration, however, is in high demand in widespread fields of applications, including advanced display and monitoring technologies, smart sensing, and anticounterfeiting. This work reports a scalable protocol for the synthesis of tailor-made core-shell particles and subsequent processing to opal films with iridescent, pH-responsive, and mechanochromic structural color. Novel monodisperse core-shell architectures based on hard polystyrene core particles are synthesized via stepwise emulsion polymerization in a starved-feed mode. The incorporation of 4-vinylpyridine and methacrylic acid as functional comonomers in the soft particle shell facilitates pH-responsive swelling and deswelling. Mechanically stable and well-ordered colloidal crystal films are obtained by the self-assembly of the particles during processing with the powerful melt-shear organization technique. Thereby obtained opal films show Bragg-scattering at the colloidal crystalline structure and exhibit brilliant green-turquoise to blue-violet reflection colors, dependent on the angle of view and illumination. Upon changes in the pH value or mechanical deformation, the reflected wavelength shifts by more than 100 nm, leading to intriguing changes in the visible structural color. Excellent reversibility is achieved by the subsequent application of a convenient UV cross-linking strategy, corroborating the high application potential of these advanced functional materials.

Multicolor Fluorescent Inks Based on Lanthanide Hybrid Organogels for Anticounterfeiting and Logic Circuit Design

With the rapid development of information technology, the encrypted storage of information is becoming increasingly important for human life. The luminescent materials with a color-changed response under physical or chemical stimuli are crucial for information coding and anticounterfeiting. However, traditional fluorescent materials usually face problems such as a lack of tunable fluorescence, insufficient surface-adaptive adhesion, and strict synthesis conditions, hindering their practical applications. Herein, a series of luminescent lanthanide hybrid organogels (Ln-MOGs) were rapidly synthesized using a simple method at room temperature through the coordination between lanthanide ions and 2,6-pyridinedicarboxylic acid and 5-aminoisophthalic acid. And the multicolor fluorescent inks were also prepared based on the Ln-MOG and hyaluronic acid, with the advantages of being easy to write, color-adjustable, and water-responsive discoloration, which has been applied to paper-based anticounterfeiting technology. Inspired by the responsiveness of the fluorescent inks to water, we designed a logic system that can realize single-input logic operations (NOT and PASS1) and double-input logic operations (NAND, AND, OR, NOR, XOR). The encryption of a binary code can be actualized utilizing different luminescent response modes based on the logic circuit system. By adjusting the energy sensitization and luminescence mechanism of lanthanide ions in the gel structure, the information reading and writing ability of the fluorescent inks were verified, which has great potential in the field of multicolor pattern anticounterfeiting and information encryption.

Designing Yolk-Shell Nanostructures for Reversible Water-Vapor-Responsive Dual-Mode Switching of Fluorescence and Structural Color

Metal halide perovskites offer ample opportunities to develop advanced optoelectronic devices. This work showcases that the integration of metal halide perovskites into metal oxide nanoshells with controllable interior cavities can enable water-vapor-responsive dual-mode switching of fluorescence and structural color. Through a ship-in-a-bottle method to introduce a controlled amount of CsPbBr3 into MnO2 nanoshells, we have designed CsPbBr3@MnO2 yolk-shell nanostructures, which can uptake a defined amount of water to exhibit rapid (less than 1 s) and reversible (≥100 cycles) responses in both fluorescence on-off and color change when exposed to dynamic water vapor. These responses originate from the water-triggered phase transformation of CsPbBr3 to CsPb2Br5 and the structural color change of the MnO2 shell. The altered electronic and bonding structure at the oxide-halide interface, rapid water accumulation in the yolk-shell cavity, and protective effect of the oxide shell facilitate the reversible transformations. The response characteristics of the yolk-shell nanostructures have been further demonstrated in fabricating patterned films capable of multiple fluorescence/structural color responses, highlighting their potential for applications in advanced anticounterfeiting and encryption.

Versatile Deposition of Complex Colloidal Assemblies from the Evaporation of Hanging Drops

Existing strategies designed to produce ordered arrangements of colloidal particles on solid supports are of great interest for their wide range of applications, from colloidal lithography, plasmonic and biomimetic surfaces to tags for anti-counterfeiting, but they all share various degrees of complexity hampering their facile implementation. Here, a drastically simplified methodology is presented to achieve ordered particle deposition, consisting in adding micromolar amounts of cationic surfactant to a colloidal suspension drop and let it evaporate in an upside-down configuration. Confinement at the air/water interface enables particle assembly into monolayers, which are then transferred on the substrate producing highly ordered structures displaying vivid, orientation-dependent structural colors. The method is compatible with many particle types and substrates, while controlling system parameters allows tuning the deposit size and morphology, from monocrystals to polycrystalline disks and "irises", from single-component to crystal alloys with Moiré patterns, demonstrating its practicality for a variety of processes.

Preparation of polylactic acid reinforced with cellulose nanofibers toward photochromic self-healing adhesive for anti-counterfeiting applications

There are a number of drawbacks with photochromic adhesives, including their poor durability, high price tag, and lackluster performance. On the other hand, self-healable adhesives have shown to be durable and robust than conventional alternatives. Hydrogel adhesives that change color in response to ultraviolet light were created for usage in self-healable authenticating stamps. In this context, a combination of cellulose nanofibers (CNFs), polylactic acid (PLA) and nanoparticles of lanthanide aluminate (NLA) were prepared to generate an organic-inorganic hybrid hydrogel adhesive with self-healing properties. NLA agglomerates were avoided due to the use of CNFs as a nanofiller and dispersion agent. Colorless stamps require that NLA to be dispersed consistently in the CNFs/PLA hydrogel without clumping. This film becomes green when irradiated with ultraviolet, as indicated by luminescence spectra and CIE Lab coordinates. When illuminated at 365 nm, the paper sheets emitted light with a wavelength of 519 nm. The morphologies of prints were analyzed by different analytical methods. Diameter measurements from a transmission electron microscope (TEM) of the synthesized NLA ranged from 5 to 9 nm, whereas CNFs displayed diameters of 40-60 nm. The current NLA@CNFs/PLA hydrogel presents a reliable anti-counterfeiting solution for various authenticating products.

3D-Printed Biomimetic Structural Colors

Resolution control and expansibility have always been challenges to the fabrication of structural color materials. Here, a facile strategy to print cholesteric liquid crystal elastomers (CLCEs) into complex structural color patterns with variable resolution and enhanced expansibility is reported. A volatile solvent is introduced into the synthesized CLC oligomers, modifying its rheological properties and allowing direct-ink-writing (DIW) under mild conditions. The combination of printing shear flow and anisotropic deswelling of ink drives the CLC molecules into an ordered cholesteric arrangement. The authors meticulously investigate the influence of printing parameters to achieve resolution control over a wide range, allowing for the printing of multi-sized 1D or 2D patterns with constant quality. Furthermore, such solvent-cast direct-ink-writing (DIW) strategy is highly expandable and can be integrated easily into the DIW of bionic robots. Multi-responsive bionic butterfly and flower are printed with biomimetic in both locomotion and coloration. Such designs dramatically reduced the processing difficulty of precise full-color printing and expanded the capability of structural color materials to collaborate with other systems.

Tristate Photonic Crystal Film with Structural, Fluorescent, and Up-Conversion Luminescent Color for Multilevel Anticounterfeiting

Counterfeit items are growing worldwide, affecting the global economy and human health. Anticounterfeiting tags based on a physical microstructure or chemical materials have enjoyed long-term commercial success due to their visualization and inexpensive production. However, conventional anticounterfeiting tags can be readily imitated. Herein, we have overcome this limitation by assembling colloidal nanospheres and two luminescent micromaterials into a composited photonic crystal (PhC) and achieved massive scale-up fabrication of multilevel anticounterfeiting PhC films in just several minutes of thermal rolling. The fabricated PhC film exhibits three optical states, including angle-dependent structural color (reflectivity = 66%) under white light, emits green light under 980 nm light, and emits red light under ultraviolet light. Multilevel anticounterfeiting colorful images were obtained by further use of masking templates, which integrate colors from both physically colored microstructures and chemical luminescent materials. Besides, the thermal-rolling process also shows excellent feasibility for assembling microunits with different sizes into high-quality functional PhC films.

Preparation of Self-Healing Anthocyanidin-Containing Thermochromic Alginate Ink for Authentication Purposes

Thermochromic inks have proven to be a promising security encoding approach for making commercially available products less susceptible to forgery. However, thermochromic inks have been plagued with poor durability. Thus, self-healable hydrogels can be used as self-repair inks with better durability. Herein, we combined hybrid cellulose nanofibers (CNFs) and sodium alginate (SA) with anthocyanidin(Cy)-based Brassica oleracea L. var. capitata extract in the existence of mordant (ferrous sulfate) to create a self-healing ink for authentication. CNFs were used as a reinforcement agent to enhance the mechanical strength of the sodium alginate hydrogel. Both durability and thermal stability were ensured using self-healing inks. Red cabbage was used to extract Cy-based chromophore as an environmentally friendly spectroscopic probe for immobilization into SA. Using varying concentrations of anthocyanidin, self-healable composite hydrogels (Cy@SA) with thermochromic properties were provided. Using the CIE Lab color coordinate system, homogeneous purple (569 nm) films were printed onto a sheet surface. Upon heating from 25 to 70 °C, the purple color changed to red (433 nm). Transmission electron microscopy was applied to study anthocyanidin/mordant (Cy/M) nanoparticles (NPs). The properties of the applied prints were analyzed using several methods. Both the hydrogel and stamped sheets were tested for their mechanical and rheological characteristics, respectively. Research on the nanocomposite ink (Cy@SA) antibacterial properties and cytotoxicity was also conducted.

Large-Area Rewritable Paper Based on Polyurethane Inverse Photonic Glass with Durable High-Resolution Information Storage and Structural Stability

To alleviate the negative effects of resource waste and environmental pollution caused by the excessive use of paper, technologies for rewritable paper have received widespread attention and in-depth research. Despite the growing interest in rewritable paper, meeting the requirements of large-scale preparation, long-lasting information storage time, high reversibility, and good environmental stability remains a huge challenge for this technology. This study developed a solvent-responsive copolymerized polyurethane-based rewritable paper with an inverse photonic glass structure (co-PUIPG paper). Comprehensive writing modes, including handwriting, spraying, and printing, were realized by using the swelling effect of different solvents and the local force field formed by capillary force to control the deformation degree of the inverse photonic glass structure. Co-PUIPG paper can persistently store high-resolution information and has a green and environmentally friendly "write-erase" method. Meanwhile, it exhibits good rewritability, as well as high mechanical strength and exceptional resistance to environmental factors, such as friction, high temperature, and sunlight. Because the spraying method can prepare templates quickly and extensively and polyurethane materials are economical, co-PUIPG rewritable paper possesses great potential as a substitute for commercial fiber paper and its industrialization is full of great possibilities.

2D Information Security System Based on Polyurethane Inverse Photonic Glass Structure

Information security has become a major global problem in recent years. Thus, people continue to exert much effort in developing new information security technologies based on encryption and storage. In this study, a 2D information security technology based on polyurethane optical devices with inverse photonic glass structure (PU-IPG) is introduced. Based on 1) the swelling and plasticizing effects of various solvents on PU-IPG and 2) the capillary force that can produce geometric deformation on micro/nanostructures when solvents evaporate, a 2D information security system with two modules of decryption (structural color information display) and anticounterfeiting (structural color transformation) is successfully constructed. The spraying method adopted can be simple and fast and can provide a large area to build photonic glass templates, which greatly improves the capacity and category of information in the encryption system. The prepared PU-IPG optical devices can produce large-area multicolor output capability of information. These devices also have excellent mechanical properties, strong cycle stability, environmental friendliness, and low price. Therefore, the preparation strategy has great reference value and application prospects in the field of information security.

Inkjet Printed Photonic Cellulose Nanocrystal Patterns

Naturally-sourced cellulose nanocrystals (CNCs) are elongated, birefringent nanoparticles that can undergo cholesteric self-assembly in water to produce vibrant, structurally colored films. As such, they are an ideal candidate for use as sustainable and cost-effective inks in the printing of scalable photonic coatings and bespoke patterns. However, the small volume and large surface area of a sessile CNC drop typically leads to rapid evaporation, resulting in microfilms with a coffee-stain-like morphology and very weak coloration. Here, it is demonstrated that inkjet printing of CNC drops directly through an immiscible oil layer can immediately inhibit water loss, resulting in reduced internal mass flows and greater time for cholesteric self-assembly. The color of each microfilm is determined by the initial composition of the drop, which can be tuned on-demand by exploiting the overprinting and coalescence of multiple smaller drops of different inks. This enables the production of multicolored patterns with complex optical behaviors, such as angle-dependent color and polarization-selective reflection. Finally, the array can be made responsive to stimuli (e.g., UV light, polar solvent) by the inclusion of a degradable additive. This suite of functional properties promotes inkjet-printed photonic CNC arrays for smart colorimetric labeling or optical anticounterfeiting applications.

Octopus-inspired deception and signaling systems from an exceptionally-stable acene variant

Multifunctional platforms that can dynamically modulate their color and appearance have attracted attention for applications as varied as displays, signaling, camouflage, anti-counterfeiting, sensing, biomedical imaging, energy conservation, and robotics. Within this context, the development of camouflage systems with tunable spectroscopic and fluorescent properties that span the ultraviolet, visible, and near-infrared spectral regions has remained exceedingly challenging because of frequently competing materials and device design requirements. Herein, we draw inspiration from the unique blue rings of the Hapalochlaena lunulata octopus for the development of deception and signaling systems that resolve these critical challenges. As the active material, our actuator-type systems incorporate a readily-prepared and easily-processable nonacene-like molecule with an ambient-atmosphere stability that exceeds the state-of-the-art for comparable acenes by orders of magnitude. Devices from this active material feature a powerful and unique combination of advantages, including straightforward benchtop fabrication, competitive baseline performance metrics, robustness during cycling with the capacity for autonomous self-repair, and multiple dynamic multispectral operating modes. When considered together, the described exciting discoveries point to new scientific and technological opportunities in the areas of functional organic materials, reconfigurable soft actuators, and adaptive photonic systems.

Reconfigurable Photonic Crystal Reversibly Exhibiting Single and Double Structural Colors

Unlike absorption-based colors of dyes and pigments, reflection-based colors of photonic crystals, so called "structural colors", are responsive to external stimuli, but can remain unfaded for over ten million years, and therefore regarded as a next-generation coloring mechanism. However, it is a challenge to rationally design the spectra of structural colors, where one structure gives only one reflection peak defined by Bragg's law, unlike those of absorption-based colors. Here, we report a reconfigurable photonic crystal that exhibits single-peak and double-peak structural colors. This photonic crystal is composed of a colloidal nanosheet in water, which spontaneously adopts a layered structure with single periodicity (407 nm). After a temperature-gradient treatment, the photonic crystal segregates into two regions with shrunken (385 nm) and expanded (448 nm) periodicities, and thus exhibits double reflection peaks that are blue- and red-shifted from the original one, respectively. Notably, the transition between the single-peak and double-peak states is reversible.

Multiple-Channel Information Encryption Based on Quantum Dot Absorption Spectra

Large-capacity information encryption has attracted significant interest in the information age. The diversity and controllability of spectra have positioned them to be widely applied for information encryption. Current spectra-based information encryption methods commonly rely on either spectral alteration induced by external stimuli or the utilization of narrowband channels within spectra. However, these methods encounter a common challenge in attaining both high security and large capacity simultaneously. To address these issues, we propose a multiple-channel information encryption system based on quantum dot (QD) absorption spectra. The diversity of QD absorption spectra and their broadband features ensure that the encrypted spectra can hardly be decrypted without knowing the correct channel matrix. Meanwhile, the large capacity is realized through the combination of multiple QD spectral channels with a theoretical maximum capacity of 24.0 bits in a single spectrum. In order to optimize the performance of our proposed system, the selection principle of the channel matrix is established to achieve the rapid identification of the optimal channel matrix in several milliseconds. The additivity of QD spectral channels and the consistency of QD spectra are also explored to minimize the impact of errors on information decryption. Furthermore, two spectral encryption scenarios of spatial pattern and spectral pattern are applied to demonstrate the feasibility, showcasing their ability to achieve both a high level of security and large capacity. Owing to the advantages offered by QD spectra, the QD spectra-based information system exhibits excellent potential for broader applications in information storage, authentication, and computing.

Three-Dimensionally Printed, Vertical Full-Color Display Pixels for Multiplexed Anticounterfeiting

Information encryption strategies have become increasingly essential. Most of the fluorescent security patterns have been made with a lateral configuration of red, green, and blue subpixels, limiting the pixel density and security level. Here we report vertically stacked, luminescent heterojunction micropixels that construct high-resolution, multiplexed anticounterfeiting labels. This is enabled by meniscus-guided three-dimensional (3D) microprinting of red, green, and blue (RGB) dye-doped materials. High-precision vertical stacking of subpixel segments achieves full-color pixels without sacrificing lateral resolution, achieving a small pixel size of ∼μm and a high density of over 13,000 pixels per inch. Furthermore, a full-scale color synthesis for individual pixels is developed by modulating the lengths of the RGB subpixels. Taking advantage of these unique 3D structural designs, trichannel multiplexed anticounterfeiting Quick Response codes are successfully demonstrated. We expect that this work will advance data encryption technology while also providing a versatile manufacturing platform for diverse 3D display devices.

Fabrication of Optical Fourier Surface by Multiple-Frequency Vibration Cutting for Structural True Coloration

Optical Fourier surface is a unique patterned optical surface containing the precise sum of sinusoidal waves, each with a well-defined spatial frequency and amplitude. It can manipulate the desired diffracted light field through its Fourier transform, which brings a straightforward mathematical method for designing complex diffractive optics. However, the fabrication techniques typically have the drawbacks of low efficiency, limiting the large-scale industrial application of optical Fourier surfaces. This study presents a powerful approach, the multi-frequency vibration cutting (MFVC), to enable the high-efficiency fabrication of optical Fourier surfaces. A specific optical Fourier surface consisting of arbitrary frequency components of linear gratings has been fabricated on metallic surfaces using MFVC. Due to the capacity of multicomponent gratings in coupling red, green, and blue lights at the same incident angle, the RGB true color has been prepared. The additive and subtractive principles of mixing the three primary colors are demonstrated. The former relies on the light dispersion induced by grating diffraction, while the latter is based on the light absorption induced by the subwavelength grating-coupled surface plasma polarization (SPP). The experimental results of authentic structural true color on the aluminum surface verify the efficacy of MFVC in the fabrication of optical Fourier surfaces.

Dynamic Color-Switching of Hydrogel Micropillar Array under Ethanol Vapor for Optical Encryption

Responsive structural colors from artificially engineered micro/nanostructures are critical to the development of anti-counterfeiting, optical encryption, and intelligent display. Herein, the responsive structural color of hydrogel micropillar array is demonstrated under the external stimulus of ethanol vapor. Micropillar arrays with full color are fabricated via femtosecond laser direct writing by controlling the height and diameter of the micropillars according to the FDTD simulation. Color-switching of the micropillar arrays is achieved in <1 s due to the formation of liquid film among micropillars. More importantly, the structural color blueshift of the micropillar arrays is sensitive to the micropillar diameter, instead of the micropillar height. The micropillar array with a diameter of 772 nm takes 400 ms to complete blueshift under ethanol vapor, while that with a diameter of 522 nm blueshifts at 2400 ms. Microscale patterns are realized by employing the size-dependent color-switching of designed micropillar arrays under ethanol vapor. Moreover, Morse code and directional blueshift of structural colors are realized in the micropillar arrays. The advantages of controllable color-switching of the hydrogel micropillar array would be prospective in the areas of optical encryption, dynamic display, and anti-counterfeiting.

Comprehensive advances in the synthesis, fluorescence mechanism and multifunctional applications of red-emitting carbon nanomaterials

Red emitting fluorescent carbon nanomaterials have drawn significant scientific interest in recent years due to their high quantum yield, water-dispersibility, photostability, biocompatibility, ease of surface functionalization, low cost and eco-friendliness. The red emissive characteristics of fluorescent carbon nanomaterials generally depend on the carbon source, reaction time, synthetic approach/methodology, surface functional groups, average size, and other reaction environments, which directly or indirectly help to achieve red emission. The importance of several factors to achieve red fluorescent carbon nanomaterials is highlighted in this review. Numerous plausible theories have been explained in detail to understand the origin of red fluorescence and tunable emission in these carbon-based nanostructures. The above advantages and fluorescence in the red region make them a potential candidate for multifunctional applications in various current fields. Therefore, this review focused on the recent advances in the synthesis approach, mechanism of fluorescence, and electronic and optical properties of red-emitting fluorescent carbon nanomaterials. This review also explains the several innovative applications of red-emitting fluorescent carbon nanomaterials such as biomedicine, light-emitting devices, sensing, photocatalysis, energy, anticounterfeiting, fluorescent silk, artificial photosynthesis, etc. It is hoped that by choosing appropriate methods, the present review can inspire and guide future research on the design of red emissive fluorescent carbon nanomaterials for potential advancements in multifunctional applications.

Artificial Skin with Patterned Stripes for Color Camouflage and Thermoregulation

Chameleons are famous for their quick color changing abilities, and it is commonly assumed that they do this for camouflage. However, recent reports revealed that chameleons also change color for body temperature regulation. Inspired by the structure of the panther chameleon's skin, a stripe-patterned poly(N-isopropylacrylamide) (PNIPAM) and polyacrylamide (PAM) hydrogel film with a laminated structure is fabricated in this work; thus, both camouflage and thermoregulation can be achieved through controlling Vis and NIR light effectively. For the PNIPAM stripe, the upper layer is the native PNIPAM hydrogel and the lower layer is the carbon nanotube-composited PNIPAM hydrogel. Thus, the PNIPAM stripe is capable of reaching 28 °C at a low environmental temperature (12 °C) and a low radiation intensity (20 mW cm-2), while preventing the body temperature from rising by changing to white under a strong radiation intensity (100 mW cm-2). For the PAM stripe, the upper layer combines colloidal photonic crystals and displays a tunable structural color by stretching, and the lower layer is mixed with PNIPAM microgels for thermal regulation. Through the fabrication of multifunctional patterns, the film can achieve both dynamic structural color and thermoregulation by precisely controlling solar radiation absorption, scattering, and reflection. More importantly, in the stripe-patterned system, the shrinkage of the PNIPAM stripes can effectively trigger the elongation of the PAM stripe, which endows the structural color changing process to be self-powered completely. The performances show that the stripe-patterned film may have potential applications in intelligent coatings, especially in areas with large temperature differences during the day such as high plains.

Water-Molecule-Induced Reversible Fluorescence in a One-Dimensional Mn-Based Hybrid Halide for Anticounterfeiting and Digital Encryption-Decryption

Hybrid metal halides with reversible transformation of structure and luminescence properties have attracted significant attention in anticounterfeiting. However, their long transition time and slow response rate may hinder the rapid identification of confidential information. Here, a one-dimensional hybrid manganese-based halide, i.e., (C5H11N3)MnCl2Br2·H2O, is prepared and demonstrates the phenomenon of water-molecule-induced reversible photoluminescence transformation. Heating for <40 s induces a dynamic transfer of red-emissive (C5H11N3)MnCl2Br2·H2O to green-emissive (C5H11N3)MnCl2Br2. In addition, the green emission can gradually revert to red emission during a cooling process in a moist environment, demonstrating excellent reversibility. It is found that the water molecule acts as an external stimulus to realize the reversible transition between red and green emission, which also exhibits remarkable stability during repeated cycles. Furthermore, with the assistance of heating and cooling, a complex digital encryption-decryption and an optical "AND" logical gate are achieved, facilitating the development of anticounterfeiting information security.

A PSCLC Pattern Prepared Based on Handedness Inversion for Anti-counterfeiting

Handedness inversion has been widely studied in supramolecular chemistry and material sciences. Herein, a photoisomerizable chiral dopant was synthesized, which could induce the formation of a cholesteric phase with right-handedness. The Bragg reflection band of the cholesteric liquid crystal (CLC) mixture shifted to the long wavelength with extending 365 nm UV light irradiation time. Based on this photochromic property, a colourful polymer-stabilized CLC (PSCLC) film was prepared using a grayscale mask. A handedness reversible CLC mixture was prepared using a mixture of this chiral dopant and S5011. With extending the UV light irradiation time, the handedness of the CLC mixture changed from right- to left-handedness. A patterned PSCLC film was prepared using this CLC mixture. Complementary images were observed under right- and left-handedness circularly polarized lights. The results shown here not only give us a better understanding the competition between photopolymerization and photoisomerization, but also lay the foundations for decoration and anti-counterfeiting.

Convolution Neural Network-Assisted Smart Fluorescent-Tongue Based on Lanthanide Ion-Induced Forming MOF/HOF Composite for Differentiation of Flavor Compounds and Wine Identification

Wine flavor is a vital quality characteristic in wine, influenced by those flavor components with low sensory thresholds. It is crucial to recognize and classify the wine components related to their flavor contribution. The integration of fluorescent sensors and artificial intelligence shows huge potential in flavor recognition by emulation of the gustatory perception system. Meanwhile, achieving information identification of wine based on multiple information barcodes has hopeful applications in anticounterfeiting. In this study, we present a simple method in which organic linkers are weaved into a hydrogen-bonded organic framework (HOF) for the available transformation of a metal-bonded organic framework (MOF) induced by lanthanide ions (Ln3+). The fluorescent Ln-MOF/HOF composite exhibits high sensitivity, rapid response, and good recyclability for detecting seven flavor compounds in wine, including tannic acid, ionone, vanillin, anethole, anisaldehyde, hydroxybenzaldehyde, and 4-hydroxy-2-methylacetophenone. Depending on its satisfactory detectability, a novel strategy is provided in which a fluorescent sensor is able to function as a smart fluorescent-tongue (F-tongue) by the aid of convolutional neural network to differentiate these seven flavor compounds. In addition, the Ln-MOF/HOF composite has been used to prepare multiple information barcodes for wine information identification on the basis of dynamic fluorescence response toward tannic acid. The mimetic gustatory perception system developed in this study may offer a promising strategy for flavor recognition in food and further food anticounterfeiting.

Polymer-Stabilized Cholesteric Liquid Crystal Films with Double Reflection Bands Prepared Based on the Competition between Photopolymerization and Photoisomerization

Composite colors have been widely found in nature. Herein, polymer-stabilized cholesteric liquid crystal (PSCLC) films with composite structural colors were prepared through a one-step photopolymerization approach. The CLC mixtures were prepared using a mixture of acrylates and a mixture of two chiral dopants. One of the chiral dopants is polymerizable, and the other one is photoisomerizable. After photopolymerization, the PSCLC films with double Bragg reflection bands were obtained on the surface of a substrate. The competition between the photopolymerization of the acrylates and the photoisomerization of the chiral dopant was proposed to drive the formation of the double reflection bands. Without oxygen inhibition, the polymerization of the acrylates near the substrate surface was carried out. However, due to oxygen inhibition, the polymerization of the acrylates near the air was retarded. Then, the photoisomerization of the chiral dopant was carried out prior to the polymerization of the acrylates. The wavelengths of the double reflection bands were tunable by changing the concentrations of the acrylates and chiral dopants and the polymerization temperature. Colorful patterns with composite structural colors were prepared, which were suitable for decoration and anti-counterfeiting.

Responsive Regulation of Energy Transfer in Lanthanide-Doped Nanomaterials Dispersed in Chiral Nematic Structure

The responsive control of energy transfer (ET) plays a key role in the broad applications of lanthanide-doped nanomaterials. Photonic crystals (PCs) are excellent materials for ET regulation. Among the numerous materials that can be used to fabricate PCs, chiral nematic liquid crystals are highly attractive due to their good photoelectric responsiveness and biocompatibility. Here, the mechanisms of ET and the photonic effect of chiral nematic structures on ET are introduced; the regulation methods of chiral nematic structures and the resulting changes in ET of lanthanide-doped nanomaterials are highlighted; and the challenges and promising opportunities for ET in chiral nematic structures are discussed.

Hydrochromic Perovskite System with Reversible Blue-Green Color for Advanced Anti-Counterfeiting

The intrinsic instability of halide perovskites toward to external stimulus, has created a competitive advantage for designing stimuli-responsive materials. However, the external environment tuning reversibly fluorescence emission of perovskite system is still limited. In this work, humidity is verified to act as a new option to modulate the emission properties of mixed-halide perovskite. The perovskite nanocrystals (PNCs) photoirradiated in dichloromethane are easily and stably redispersed in water, and emit bright fluorescence which is quite different from the original. Moreover, the perovskites confined on glass slide can reversibly switch their fluorescence between blue and green colors under moisture. It is demonstrated that the factors of different solubilities of CsCl and CsBr in water, the structural transformation of perovskites and the confine of glass matrix play key roles in the reversible transformation. Finally, the combination of hydrochromic CsPb(Brx Cly )3 and water-resistant CsPb(Brx Cly )3 -polymethyl methacrylate have been applied in advanced anti-counterfeiting, which greatly improves the information security. This work not only give an insight into the effects of humidity on fluorescence and structures of PNCs, but also offer a new class of hydrochromic PNCs materials based on reversible emission transformation for potential application in sensors, anti-counterfeiting and information encryption.

Bio-inspired optical structures for enhancing luminescence

Luminescence is an essential signal for many plants, insects, and marine organisms to attract the opposite sex, avoid predators, and so on. Most luminescent living organisms have ingenious optical structures which can help them get high luminescent performances. These remarkable and efficient structures have been formed by natural selection from long-time evolution. Researchers keenly observed the enhanced luminescence phenomena and studied how these phenomena happen in order to learn the characteristics of bio-photonics. In this review, we summarize the optical structures for enhancing luminescence and their applications. The structures are classified according to their different functions. We focus on how researchers use these biological inspirations to enhance different luminescence processes, such as chemiluminescence (CL), photoluminescence (PL), and electroluminescence (EL). It lays a foundation for further research on the applications of luminescence enhancement. Furthermore, we give examples of luminescence enhancement by bio-inspired structures in information encryption, biochemical detection, and light sources. These examples show that it is possible to use bio-inspired optical structures to solve complex problems in optical applications. Our work will provide guidance for research on biomimetic optics, micro- and nano-optical structures, and enhanced luminescence.

Dual-layer optical encryption fluorescent polymer waveguide chip based on optical pulse-code modulation technique

Information encryption technique has broad applications in individual privacy, military confidentiality, and national security, but traditional electronic encryption approaches are increasingly unable to satisfy the demands of strong safety and large bandwidth of high-speed data transmission over network. Optical encryption technology could be more flexible and effective in parallel programming and multiple degree-of-freedom data transmitting application. Here, we show a dual-layer optical encryption fluorescent polymer waveguide chip based on optical pulse-code modulation technique. Fluorescent oligomers were doped into epoxy cross-linking SU-8 polymer as a gain medium. Through modifying both the external pumping wavelength and operating frequency of the pulse-code modulation, the sender could ensure the transmission of vital information is secure. If the plaintext transmission is eavesdropped, the external pumping light will be switched, and the receiver will get warning commands of ciphertext information in the standby network. This technique is suitable for high-integration and high-scalability optical information encryption communications.

Accelerating Cellulose Nanocrystal Assembly into Chiral Nanostructures

Cellulose nanocrystal (CNC) suspensions self-assembled into chiral nematic liquid crystals. This property has enabled the development of versatile optical materials with fascinating properties. Nevertheless, the scale-up production and commercial success of chiral nematic CNC superstructures face significant challenges. Fabrication of chiral nematic CNC nanostructures suffers from a ubiquitous pernicious trade-off between uniform chiral nematic structure and rapid self-assembly. Specifically, the chiral nematic assembly of CNCs is a time-consuming, spontaneous process that involves the organization of particles into ordered nanostructures as the solvent evaporates. This review is driven by the interest in accelerating chiral nematic CNC assembly and promoting a long-range oriented chiral nematic CNC superstructure. To start this review, the chirality origins of CNC and CNC aggregates are analyzed. This is followed by a summary of the recent advances in stimuli-accelerated chiral nematic CNC self-assembly procedures, including evaporation-induced self-assembly, continuous coating, vacuum-assisted self-assembly, and shear-induced CNC assembly under confinement. In particular, stimuli-induced unwinding, alignment, and relaxation of chiral nematic structures were highlighted, offering a significant link between the accelerated assembly approaches and uniform chiral nematic nanostructures. Ultimately, future opportunities and challenges for rapid chiral nematic CNC assembly are discussed for more innovative and exciting applications.

pH- and temperature-responsive supramolecular assemblies with highly adjustable viscoelasticity: a multi-stimuli binary system

Stimuli-responsive materials are increasingly needed for the development of smart electronic, mechanical, and biological devices and systems relying on switchable, tunable, and adaptable properties. Herein, we report a novel pH- and temperature-responsive binary supramolecular assembly involving a long-chain hydroxyamino amide (HAA) and an inorganic hydrotrope, boric acid, with highly tunable viscous and viscoelastic properties. The system under investigation demonstrates a high degree of control over its viscosity, with the capacity to achieve over four orders of magnitude of control through the concomitant manipulation of pH and temperature. In addition, the transformation from non-Maxwellian to Maxwellian fluid behavior could also be induced by changing the pH and temperature. Switchable rheological properties were ascribed to the morphological transformation between spherical vesicles, aggregated/fused spherical vesicles, and bicontinuous gyroid structures revealed by cryo-TEM studies. The observed transitions are attributed to the modulation of the head group spacing between HAA molecules under different pH conditions. Specifically, acidic conditions induce electrostatic repulsion between the protonated amino head groups, leading to an increased spacing. Conversely, under basic conditions, the HAA head group spacing is reduced due to the intercalation of tetrahydroxyborate, facilitated by hydrogen bonding.

Aperture-Controlled Fabrication of All-Dielectric Structural Color Pixels

While interference colors have been known for a long time, conventional color filters have large spatial dimensions and cannot be used to create compact pixelized color pictures. Here we report a simple yet elegant interference-based method of creating microscopic structural color pixels using a single-mask process using standard UV photolithography on an all-dielectric substrate. The technology makes use of the varied aperture-controlled physical deposition rate of low-temperature silicon dioxide inside a hollow cavity to create a thin-film stack with the controlled bottom layer thickness. The stack defines which wavelengths of the reflected light interfere constructively, and thus the cavities act as micrometer-scale pixels of a predefined color. Combinations of such pixels produce vibrant colorful pictures visible to the naked eye. Being fully CMOS-compatible, wafer-scale, and not requiring costly electron-beam lithography, such a method paves the way toward large scale applications of structural colors in commercial products.

Metal-Ion-Doped Manganese Halide Hybrids with Tunable Emission for Advanced Anti-Counterfeiting

Stimuli-responsive luminescent materials have received great attention for their potential application in anti-counterfeiting and information encryption. Manganese halide hybrids have been considered an efficient stimuli-responsive luminescent material due to their low price and adjustable photoluminescence (PL). However, the photoluminescence quantum yield (PLQY) of PEA₂MnBr₄ is relatively low. Herein, Zn²⁺- and Pb²⁺-doped PEA₂MnBr₄ samples are synthesized, and show an intense green emission and orange emission, respectively. After doping with Zn²⁺, the PLQY of PEA₂MnBr₄ is elevated from 9% to 40%. We have found that green emitting Zn²⁺-doped PEA₂MnBr₄ could transform to a pink color after being exposed to air for several seconds and the reversible transformation from pink to green was achieved by using heating treatment. Benefiting from this property, an anti-counterfeiting label is fabricated, which exhibits excellent "pink-green-pink" cycle capability. Pb²⁺-doped PEA₂Mn_0.88Zn_0.12Br₄ is acquired by cation exchange reaction, which shows intense orange emission with a high QY of 85%. The PL of Pb²⁺-doped PEA₂Mn_0.88Zn_0.12Br₄ decreases with increasing temperature. Hence, the encrypted multilayer composite film is fabricated relying on the different thermal responses of Zn²⁺- and Pb²⁺-doped PEA₂MnBr₄, whereby the encrypted information can be read out by thermal treatment.

Practical Preparation of Elastomer-Immobilized Nonclose-Packed Colloidal Photonic Crystal Films with Various Uniform Colors

Colloidal photonic crystals, which are three-dimensional periodic structures of monodisperse submicron-sized particles, are expected to be suitable for novel photonic applications and color materials. In particular, nonclose-packed colloidal photonic crystals immobilized in elastomers exhibit significant potential for use in tunable photonic applications and strain sensors that detect strain based on color change. This paper reports a practical method for preparing elastomer-immobilized nonclose-packed colloidal photonic crystal films with various uniform Bragg reflection colors using one kind of gel-immobilized nonclose-packed colloidal photonic crystal film. The degree of swelling was controlled by the mixing ratio of the precursor solutions, which used a mixture of solutions with high and low affinities for the gel film as the swelling solvent. This facilitated color tuning over a wide range, enabling the facile preparation of elastomer-immobilized nonclose-packed colloidal photonic crystal films with various uniform colors via subsequent photopolymerization. The present preparation method can contribute to the development of practical applications of elastomer-immobilized tunable colloidal photonic crystals and sensors.